Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Geobrugg Marshal Post
PROTECT YOUR TRACK MARHSALS AND WORKERS
The Geobrugg marshal post is designed to protect marshals and track workers around the circuit. Its unique design offers a very high level of protection while maintaining the flexibility of moving the marshal post around your circuit for different configurations.
EN
.20
013
1
GEOBRUGG MARSHAL POST – THE FLEXIBLE SOLUTION FOR YOUR RACE TRACK.The marshal post consists of one solid NORDBETON concrete base with special Geobrugg marshal post debris fence panels. The track side facing panel has two openings for marshals allowing fl ag operations or a fast response in case of an accident.
As a stand-alone solution, the marshal post can be installed free standing or behind a guardrail. For the free standing solution make sure the marshal post is protected additionally with tire six packs.
The Geobrugg marshal post provides the following features:
High-tensile steel wire net
The mesh made out of high-tensile steel wire with a
tensile strength of ≥ 1,770 N/mm², enables maximum
energy absorption with minimum deformation.
Rapid installation
Our solutions are based on a plug and play principle.
Installation manuals or movies make it easy to do the
installation.
FIA accepted
Our barriers are installed at FIA and FIM homologated
circuits around the world.
Relocatable
Our design enables the easy relocation of the marshal
post in case of circuit modifications.
Find additional projects in our project database:www.geobrugg.com/projects
detail A
detail B
0,17--hdgHEXAGON BOLT DIN 933 - M20x40-8.865701300,08--hdgWASHER DIN 9021 M20 - 140 HV65701400,01--hdgWASHER DIN 125-A M16 - 140 HV85701420,03--hdgHEXAGON NUT DIN 934 M16-885701370,12--hdgHEXAGON BOLT DIN 933 - M16x55-8.885701352,44PF-439hdgPANEL CONNECTION2439
117,77PF-082hdgSIDE-PANELFOR MARSHAL POST - PRE-ASSEMBLY
2082
224,32PF-081hdgFRONT-PANELFOR MARSHAL POST - PRE-ASSEMBLY
1081
6142,52----CONCRETE ELEMENT FOR MARSHAL POST1723kgPlan-Nr.MaterialBezeichnungStk.Pos.
A
B
Tel +41 71 466 81 55 Fax +41 71 466 81 50Aachstrasse 11 CH-8590 Romanshorn
BRUGG
micReplaced by:Drawn by:
translated or reproduced. This drawing will not be replaced when modified.
Replacement for:
Date:Date:
This document is the property of GEOBRUGG AG and fully protected by copyright. It may not be distributed in whole or in part, in any way copied,
A3
16.03.2016
6610.052 kgWeight [kg]:
Date:Released by:
ChM-No:
Checked by:
PF-080
PANEL FENCE 350schema marshal postRallycross Bikernieku
P16-500130
Alle nicht speziell bezeichneten Schweissnähtesind als Kehlnähte in der Qualitätsstufe QC nach Norm SIA 263 auszuführen! Wurzelmass a=min. 4mm, a=max. 0.7xWandstärke des dünneren Teiles. Feuerverzinkt nach SN EN ISO 1461 Allgemeine Toleranzen nach SN EN 22768-1-m
4260
1000
976
589 589
97635
29
400 3460 400
1413979141
411
1534
570130
570140
570135
570142
570137
439
trackside
ground level
723
082
082
081
detail A
detail B
0,17--hdgHEXAGON BOLT DIN 933 - M20x40-8.865701300,08--hdgWASHER DIN 9021 M20 - 140 HV65701400,01--hdgWASHER DIN 125-A M16 - 140 HV85701420,03--hdgHEXAGON NUT DIN 934 M16-885701370,12--hdgHEXAGON BOLT DIN 933 - M16x55-8.885701352,44PF-439hdgPANEL CONNECTION2439
117,77PF-082hdgSIDE-PANELFOR MARSHAL POST - PRE-ASSEMBLY
2082
224,32PF-081hdgFRONT-PANELFOR MARSHAL POST - PRE-ASSEMBLY
1081
6142,52----CONCRETE ELEMENT FOR MARSHAL POST1723kgPlan-Nr.MaterialBezeichnungStk.Pos.
A
B
Tel +41 71 466 81 55 Fax +41 71 466 81 50Aachstrasse 11 CH-8590 Romanshorn
BRUGG
micReplaced by:Drawn by:
translated or reproduced. This drawing will not be replaced when modified.
Replacement for:
Date:Date:
This document is the property of GEOBRUGG AG and fully protected by copyright. It may not be distributed in whole or in part, in any way copied,
A3
16.03.2016
6610.052 kgWeight [kg]:
Date:Released by:
ChM-No:
Checked by:
PF-080
PANEL FENCE 350schema marshal postRallycross Bikernieku
P16-500130
Alle nicht speziell bezeichneten Schweissnähtesind als Kehlnähte in der Qualitätsstufe QC nach Norm SIA 263 auszuführen! Wurzelmass a=min. 4mm, a=max. 0.7xWandstärke des dünneren Teiles. Feuerverzinkt nach SN EN ISO 1461 Allgemeine Toleranzen nach SN EN 22768-1-m
4260
1000
976
589 589
97635
29
400 3460 400
1413979141
411
1534
570130
570140
570135
570142
570137
439
trackside
ground level
723
082
082
081
Front view Top view
Geobrugg AG
Aachstrasse 11 | 8590 Romanshorn | Switzerland
www.geobrugg.com
A BRUGG GROUP COMPANY
Geobrugg North America, LLC
22 Centro Algodones | Algodones, NM 87001 USA
P 505 771 4080 | F 505 771 4081
www.geobrugg.com | [email protected]
A BRUGG GROUP COMPANY