Details of the Projects Developed by ECE Students Project 1

Roll No Student's Name Project Title Supervisor

12EC1028 Sujata Dubey IOT Based Home

Automation System

Dr Rajeev Ratan

12EC7002 Rishi Kumar Shukla

• Got First Prize (POSTER PRESENTATION) in National Technology Day Celebration on

11th May 2016 at MVN University, Palwal.

Project Description

In today’s world Automatic systems are being preferred over manual system. With the rapid increase in

the number of users of internet over the past decade has made Internet a part and parcel of life, and IoT

is the latest and emerging internet technology. Internet of things is a growing network of everyday

object from industrial machine to consumer goods that can share information and complete tasks while

you are busy with other activities. Wireless Home Automation system(WHAS) using IoT is a system

that uses computers or mobile devices to control basic home functions and features automatically

through internet from anywhere around the world, an automated home is sometimes called a smart

home. It is meant to save the electric power and human energy. The home automation system differs

from other system by allowing the user to operate the system from anywhere around the world through

internet connection.

In this project, the students collected data from load sensor and temperature sensor and transferred the

data in real time to the user’s mobile on things speak via ESP8266. In the prototype, the students

actually monitored the weight of the gas cylinder and temperature of the surrounding and transferred

the data in real time to the user’s mobile on things speak via ESP8266.

Project 2

Roll No Student's Name Project Title Supervisor

12EC1008 Himanshu Sharma

Mobile Controlled

Purified Rain water

supply

Mr. Roop Singh

12EC1009 Karamvir Sorout

12EC1020 Sandeep

12EC1032 Vikas

• Got First Prize (LIVE PROJECT DEMONSTRATION) in National Technology Day

Celebration on 11th May 2016 at MVN University, Palwal.

This is a very inovotive and usefull project. It is based on Rainwater harvesting along with minimal

waste of water and on the other hand very cost effective. This project can be divided in 4 parts

1) Water Collection

Rain water from the roof has to be collected underground reserviours

2) Pumping of water using solar pump

3) Cleaning of water in four stages

4) Supply of water that particular home which has generated a demand by dialing a particular

code .

Project 3

Roll No Student's Name Project Title Supervisor

12EC1022 Shreshtha Ahuja

Bluetooth Based Home

Automation Ms Richa Sorot

12EC1024 Simaran

12EC1003 Avantika

12EC7001 Priyanka Mishra

Project Description

It is amazing if we are able to control your AC appliances just with a touch of our Android smartphone.

All we need to tap on our phone and can easily switch ON/OFF our lights, fans and other home

appliances. It is preferable to use bluetooth because nowadays people have their smartphones with

them all the time, since the smartphones have bluetooth facility in them, thus it's better to use bluetooth

rather than using RF remotes or IR remotes.

Using bluetooth has many of its own advantages :

1.It's secure.

2.Easy to use.

3.It works in short distance range(i.e. upto 10mtrs.)

4.Anyone can find free bluetooth apps on android and many more.

Project 4

Roll No Student's Name Project Title Supervisor

12EC1015 Pawan Kumar Sharma Automatic car speed

control

Ms. Priyanka

Kaushik

12EC1014 Nitin Thapliyal

12EC1029 Sumit Mangla

Project Description

Over speeding is one of the biggest reason for accidents. They are not only dangerous for themsleves

but for other commutators too. Police may cought somebody and issue a chalan but till then it may

have created havoc. Aim of this project is to control the speed of a vehicle in a certain area without

concent of drivers ,evenif some one press its accelartor for full it can not increase the speed of vehicle.

This control is given to Police control room so its upto police control room to exempt some vehicle (in

case of emergency) or to apply speed control

Project 5

Roll No Student's Name Project Title Supervisor

12EC1006 Dheeraj Vats

Automatic Solar

Street Light

MS. Shalini

12EC1021 Sangam

12EC1010 Kavita Sharma

12EC1023 Sushant Bhardwaj

Project Description

It is the most energy effecient system for Street light. Lights turn on only in the presence of a vehicle in

that area . The energy source used for this system is Solar energy and pressure transducers so no cost

and no polution for lighting. We can save a lot of energy by this way and can be stored so that if solar

power is not available eg rainy day, that stored power can be used.

Another advantage of this system is that it is using pressure transducer so it will convert energy by the

pressure which is exerted by a passing car.

Project 6

Roll No Student's Name Project Title Supervisor

12EC1019 Rakesh Bainsla

Wireless electricity

transfer Mr Vikas 12EC1004 Dharamender

12C1018 Rahul Rawat

Project Description

This a very revolunatory project. If we can transfer energy wireless it will have deep impact on over

daily life as this will not only reduce cost but easy shifting of electrical eqiupment is also possible.

This project is also known as vetricity . Wireless Power is commonly known by many terms, including

Inductive Power Transfer (IPT), Inductive Coupling and Resonant Power Transfer. Each these terms

essentially describe the same fundamental process – the transmission of energy from a power source to

an electrical load, without connectors, across an air gap. The basis of a wireless power system involves

essentially two coils – a transmitter and receiver coil. The transmitter coil is energized by alternating

current to generate a magnetic field, which in turn induces a current in the receiver coil.

Project 7

Roll No Student's Name Project Title Supervisor

12EC1030 Sumit Rai

Smart Car Parking

Mr. Alok

Srivastava

12EC1016 Pawan Kumar

12EC1017 Rahul Gola

12EC1034 Vishnu Sharma

Project Description

Now days in many multiplex systems there is a severe problem for car parking systems. There are

many lanes for car parking, so to park a car one has to look for the all lanes. Moreover there is a lot of

men labor involved for this process for which there is lot of investment. So the need is to develop a

system which indicates directly which parking slot is vacant in any lane. The project involves a system

including infrared transmitter and receiver in every lane and a LED & LCD display outside the car

parking gate. So the person entering parking area can view the LED display and can decide which lane

to enter so as to park the car.

Conventionally, car parking systems does not have any intelligent monitoring system. Parking lots are

monitored by human beings. All vehicles enter into the parking and waste time for searching for

parking slot. Sometimes it creates blockage. Condition become worse when there are multiple parking

lanes and each lane have multiple parking slots. Use of automated system for car parking monitoring

will reduce the human efforts. Display unit is installed on entrance of parking lot which will show

LEDs for all Parking slot and for all parking lanes. Empty slot is indicated by the respective glowing

LED.

Project 8

Roll No Student's Name Project Title Supervisor

12EC1013 Nikahat Parveen

Speed checker using

infra red Mr Harender Singh

12EC1026 Shubham Love

12EC1005 Dheeraj Pooniya

12EC1007 Harender

Project Description

Very Simple yet very effective

While driving on highways, motorists should not exceed the maximum speed limit permitted for their

vehicle. However, accidents keep taking place due to speed violations since the drivers tend to ignore

their speedometers.

So some system is required which will inform the traffic control unit about such vehicles exceeding the

speed limit to avoid accidents on the highway. This speed checker will come handy for the highway

traffic police as it will not only provide a digital display in accordance with a vehicle’s speed but also

sound an alarm if the vehicle exceeds the permissible speed for the highway.

As soon as a fast moving vehicle exceeds the speed beyond the specified limit, an alarm is sounded and

traffic control unit will be informed about the vehicle. Thus by using this system, we can manage to

control the accidents occurring on highways and ensure drivers safety.

Project 9

Roll No Student's Name Project Title Supervisor

12EC1035 Satender Kumar

RFID Stolen car

identification Mr Harender Singh 12EC1002 Akshay Aswal

12EC7003 Virender Kumar

Project Description

The main purpose of this concept is to catch the stolen vehicles by a latest technology. This research work

is developing a smart logic to identify the stolen vehicle on check

post or Toll base. Still there is no technique to identify the vehicle on check posts by any mean. To employ

this technology in use, we issue one unique identification code to every vehicle. This unique number is

stored in the silicon chip and the chip is installed in the vehicle. No one can change this number because

this UID chip is installed in the engine of the vehicle. This vehicle number is not available in the market.

Now the vehicle is equipped with the UID code. This code is also stored in the Data base of check post or

Toll base. Now when any vehicle passed through the check post/Toll then at the check post/Toll RF passive

vehicle reader generates a 125 kHz frequency for

decoding RF tag( which has been installed in the vehicle). If the data base does not find the stolen UID code

then security gate gets OPEN and if the stolen UID code is matched with the data base then security gate

remains closed and alarm becomes ON automatically and finally the stolen vehicle is caught.