Upload
others
View
66
Download
2
Embed Size (px)
Citation preview
Head office
06217 Merseburg
:
IMO Anlagenmontagen GmbH
Rosa-Luxemburg-Straße 18
Germany
Phone: +49 (0) 34 61/443-390
Fax: +49 (0) 34 61/443-385
e-mail: [email protected]
Anlagenmontagen GmbHAnlagenmontagen GmbH
PROJECT MANAGEMENT
PIPING CONSTRUCTION
SHUTDOWN PLANNING
AND EXECUTION
REFORMER REVAMPING
AND NEW CONSTRUCTION
DEMOLITION
GENERATION OF
ISOMETRICS
Competence & QualityCompetence & Qualitywww.imo-anlagenmontagen.de
EN ISO 9001 SCC**
AD-Merkbl. HP 0/TRD 201/ TRR 100
EQUIPMENT
ERECTION
IMO Anlagenmontagen GmbH
IMO Anlagenmontagen GmbH
is one of altogether five
companies which operate under the holding company
Industriemontagen Merseburg GmbH (IMO). With over
50 years of experience in the field of piping and plant
construction the activities of the present IMO group of
companies are centered around four business areas:
project execution, maintenance, fabrication and
professional training in the fields of petrochemical,
chemical and miscellaneous industries as well as
power plant construction.
Within the group is
responsible for the execution of plant construction
projects in all branches of industry.
Following areas are counted among the extensive
scope of services of ,
which acts as General Mechanical Contractor:
project management
piping construction/ piping prefabrication
shutdown planning und execution
reformer revamping and new construction
equipment erection
demolition
generation of isometrics
IMO Anlagenmontagen GmbH
PROJECT
MANAGEMENT
PIPING CONSTRUCTION
SHUTDOWN PLANNING
AND EXECUTION
REFORMER REVAMPING
AND NEW CONSTRUCTION
EQUIPMENT
ERECTION
DEMOLITION
GENERATION OF
ISOMETRICS
IMO Anlagenmontagen GmbH ensures a high quality
and on schedule realization of projects which are
subject to highest safety requirements by a consistent
quality and safety management as well as high
qualification of our employees.
The company achieves 2/3 of the total annual turnover
of the IMO group.
Anlagenmontagen GmbH
Competence & Quality Competence & Quality
Safety Management
development of a danger analysis
preparation of safety plans
construction supervision
toolbox meetings
Material Management
Quality Assurance/ Control
purchasing
material check upon acceptance
warehouse management
goods issue
construction control/ supervision
welding control/ supervision
functional test (e.g. pressure test)
acceptance test
documentation
Anlagenmontagen GmbH
PROJECT MANAGEMENT PROJECT MANAGEMENT
Anlagenmontagen GmbH
Execution of projects is done with the assistance of
IMO's own project management system (PMS).
Project Control
operations planning
capacity planning
progress control
construction supervision
Interface Management
Contracts Management
steel construction
scaffolding
technical industrial insulation (to protect against
heat, cold, sound and fire)
corrosion protection
non-destructive examination
cranes and transportation
preparation/ acquisition and administration of all
contracts including revision service
Competence & Quality Competence & Quality
PIPING CONSTRUCTION
Anlagenmontagen GmbH Anlagenmontagen GmbH
On the basis of planning and execution documents we
realize:
Supply, prefabrication and erection of piping systems in
all pressure ranges and of various material, such as:
general construction steel, boiler plate, cast steel,
fine grained construction steel
high-temperature steel
low-temperature steel / nickel alloyed steel
stainless steel - ferritic, - austenitic, -austenitic-ferritic
nickel and nickel alloy
titanium
Assembly and installation of piping
take place
in new plants
in plants to be reconstructed
on pipe racks
underfloor
within various industrial branches with
the focal point on chemical and
petrochemical industry.
PIPING CONSTRUCTION
In the field of piping construction our company offers
complex services.
Qualified subcontractors are commissioned to
perform special services, such as
planning and calculation of piping systems
supply, fabrication and assembly of structural steel
non-destructive examination
heat treatment
scaffolding
corrosion protection
technical industrial insulation (to protect against heat,
cold, sound and fire)
E&I - supply and installation
civil works
Competence & Quality Competence & Quality
Prefabrication is carried out in nominal diameters of 1" to
56" and in pressure ranges from 150 to 2,500 lbs.
Special prefabrication of jacketed pipes is also included
in our services.
1,500-2,000 tons
Yearly production capacity:
PREFABRICATION
Anlagenmontagen GmbH Anlagenmontagen GmbH
Prefabrication of piping systems for realizing projects is
carried out in the central prefabrication in Frankleben
on the basis of free-issued isometrics.
For prefabricating piping systems materials of
following material groups are processed:
general construction steel, boiler plates, cast steel,
fine grained construction steel (e.g. ASTM A106 Gr. B,
ASTM A333 Gr. 6)
high-temperature steel (e.g. ASTM A234 Gr. WP 11,
ASTM A234 Gr. WP 22)
low-temperature steel / nickel alloyed steel
(e.g. ASTM A35 Gr. LF 3)
stainless steel - ferritic, - austenitic, - austenitic-ferritic
(e.g. ASTM A321 Gr. TP 316H, S 31803, 316 L)
nickel and nickel alloy (e.g. LC-Ni 99, Hastelloy B3,
Hastelloy C22, Haynes alloy 625)
titanium (e.g. titanium1, titanium 2)
Welding education
CrNi - 1.080 m²
Workshop CS - 1.080 m²
Storage hall - 1.620 m²
Workshop CS - 1.620 m²
Crane runway - lift capacity 5t
Free storage area - 2.640 m²
Crane runway - lift capacity 8t
Storage hall - 160m²
Free storage area - 2.000m²
Free storage area - 4.530m²
Connection to highway
Entry/ Exit
Transformer station
Office buildings
Workshop
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
4
5 6
7 8
9 10
11
14
13
12
15
Area 51.750 m
Area Frankleben
3
MerseburgA38
A9
A9
B181
B91
B91
A38
GroßkorbethaBraunsbedra
Mücheln
Beuna
FranklebenLeuna
FranklebenLeipzig
Halle
PREFABRICATION
Exit A38 Merseburg - Süd
Competence & Quality Competence & Quality
SHUTDOWN PLANNING
AND EXECUTION
Anlagenmontagen GmbH Anlagenmontagen GmbH
IMO Anlagenmontagen GmbH predominantly carries
out shutdown planning and execution as General
Mechanical Contractor (GMC).
According to the requirements of our clients, IMO
Anlagenmontagen GmbH also performs partial works like:
acquisition of weak spots and planning of their
repair
detailing / progress planning
general planning and coordination
preparation of danger and risk analysis
preparation of quality plans
interface control
preparation of test & inspection plans
(from working steps)
determination of necessary resources
resource and arrangement planning
transport and road planning
control and supervision of safety
SHUTDOWN PLANNING
AND EXECUTION
Competence & Quality Competence & Quality
REFORMER REVAMPING
AND NEW CONSTRUCTION
Anlagenmontagen GmbH Anlagenmontagen GmbH
In the field of piping construction
is specialized in piping and
revamping of split and reformer furnaces, which are
used in the petrochemical and chemical industries, as
well as process furnaces in refineries.
Our services include:
assembly and disassembly of coils
assembly and disassembly of manifolds/ header
assembly and disassembly of pigtails
assembly and disassembly of refractory lining
assembly and disassembly of reformer inlet and
outlet piping
steam drum piping
assembly and disassembly of reformed gas cooler
other works necessary, like
assembly and disassembly of support systems
assembly and disassembly of burners
repair on shell plating of furnace
IMO Anlagen-
montagen GmbH
REFORMER REVAMPING
AND NEW CONSTRUCTION
Competence & Quality Competence & Quality
EQUIPMENT
ERECTION
Anlagenmontagen GmbH Anlagenmontagen GmbH
Competence & Quality Competence & Quality
erection of complete or assembly of to be completed
columns, vessels and silos
assembly of machines, e.g. mixer/agitator, heat
exchanger, separator
assembly of extruders
erection of pumps and compressors, preferably
delivered as package units
erection of conveying equipment in complete sections
preparation of erection technologies and lifting
studies
EQUIPMENT
ERECTION
DEMOLITION
Anlagenmontagen GmbH Anlagenmontagen GmbH
disassembly of individual pieces of equipment for
reuse
demolition of individual pieces of equipment for
scrapping
professional disassembly of complete industrial
plants and reconstructing them at another location
demolition of complete plants for scrapping
demolition services above and underground as well
as professional disposal of accrued residue
DEMOLITION
Within the scope of these services we have the
knowledge required, the necessary technical
equipment, and qualified personnel to perform
demolition works taking into consideration the
necessary work safety.
Competence & Quality Competence & Quality
Some of our clients
GENERATION OF
ISOMETRICS
Anlagenmontagen GmbH Anlagenmontagen GmbH
Documentation on site and generating of measured
isometrics by our qualified personnel is carried out on
the basis of project-oriented pipe classes, PID, plant
layouts and issued layout plans.
As basis for generating isometrics, necessary pipe
specifications can be converted into the software from
the plant planning systems.
Submission of isometrics for call for tenders, pur-
chasing of material, assembly or final documentation is
carried out electronically.
Isometrics can be submitted to the clients in various
formats, such as DXF, DGN or DWG.
Competence & Quality Competence & Quality
The Logos are registered mark or registered trade marks of the appropriate companies.