Embed Size (px)
DESCRIPTION
Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: IEEE P802.15 TG2 / EMC Society Standards Development Committee Joint Meeting Date Submitted: 13 March 2001 Source: Stephen Berger Company TEM Consulting, LP - PowerPoint PPT Presentation
Citation preview
March 2001
Stephen Berger, TEM ConsultingSlide 1
doc.: IEEE 802.15-01/168r0
Submission
Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs)Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs)
Submission Title: IEEE P802.15 TG2 / EMC Society Standards Development Committee Joint Meeting
Date Submitted: 13 March 2001Source: Stephen Berger Company TEM Consulting, LPAddress 140 River Rd., Georgetown, Tx. 78628Voice: (512) 864-3365, FAX: (512) 869-8709, E-Mail: [email protected]
Re: Presentation prepared for joint meeting, 14 March, 2001
Abstract: This presentation presents the scope and charter of the IEEE EMC Society SDCom and discusses areas of mutual interest with IEEE 802.15 TG2
Purpose: Initiation of liaison with IEEE EMC SDCom for areas of mutual interest
Notice: This document has been prepared to assist the IEEE P802.15. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P802.15.
March 2001
Stephen Berger, TEM ConsultingSlide 2
doc.: IEEE 802.15-01/168r0
Submission
IEEE 802.15 TG 2&
IEEE EMC SocietyStandards Development Committee
(IEEE EMCS SDCom)
Joint Meeting
March 2001
Stephen Berger, TEM ConsultingSlide 3
doc.: IEEE 802.15-01/168r0
Submission
IEEE EMCS SDCom Organization
March 2001
Stephen Berger, TEM ConsultingSlide 4
doc.: IEEE 802.15-01/168r0
Submission
March 2001
Stephen Berger, TEM ConsultingSlide 5
doc.: IEEE 802.15-01/168r0
Submission
IEEE EMCS SDCom Scope & Purpose
The IEEE EMC Society Standards Development Committee is responsible to guide the development of IEEE EMC Standards.
The IEEE EMC Society is the primary international developer of fundamental test and measurement standards for EMC.
March 2001
Stephen Berger, TEM ConsultingSlide 6
doc.: IEEE 802.15-01/168r0
Submission
IEEE EMCS SDCom Standards
STD / DATE TITLE
STD 139 -1988 IEEE Recommended Practice for the Measurement of Radio Frequency Emission from Industrial, Scientific, and Medical (ISM) Equipment Installed on the Users Premises
STD 140-1990 IEEE Recommended Practice for the Minimization of Interference from Radio
Frequency Heating Equipment STD 187-1990 IEEE Standard on Radio Receivers: Open Field Method of Measurement of Spurious
Radiation from FM and Television Broadcast Receivers STD 213-1987 IEEE Standard Procedure for Measuring Conducted Emissions in the Range of
300kHz to 25MHz from Television and FM Broadcast receivers to Power Lines STD 299-1991 IEEE Standard Method of Measuring the Effectiveness of Electromagnetic Shielding
Enclosures STD 376-1975 IEEE Standard for the Measurement of Impulse Bandwidth
STD 377-1980 IEEE Recommended Practice for Communication Transmitters
STD 473-1985 IEEE Practice for an Electromagnetic Site Survey (10kHz to 10 GHz)
STD 475-1983 IEEE Measurement Procedure for Field Disturbance Sensor (RF Intrusion Alarm)
March 2001
Stephen Berger, TEM ConsultingSlide 7
doc.: IEEE 802.15-01/168r0
Submission
IEEE EMCS SDCom Standards
STD / DATE TITLE
STD 1128 IEEE Recommended Practice for RF Absorber Evaluation in the Range of 30MHz to 5GHz
STD 1140-1994(Reaff 1999)
IEEE Standard Procedures for the Measurement of Electric and magnetic Fields
from Video Display Terminals (VDT’S) from 5Hz to 400kHz STD 1302 Guide for the Electromagnetic Characterization of Conductive Gaskets in the
Frequency Range of DC to 18GHzSTD 1309-1996 IEEE Standard Method for the Calibration of Electromagnetic Field Sensors and
Field Probes, Excluding Antennas, from 9 kHz to 40GHz PAR 1530 Recommended Practice for the Design and Construction of Calibration Artifacts for
Cable and Connector Shielding Test Fixtures for Frequencies from 1 Hz to 10 GHz
March 2001
Stephen Berger, TEM ConsultingSlide 8
doc.: IEEE 802.15-01/168r0
Submission
Areas of Common Interest
• EM Interference & Immunity • Accurate Measurement of EM Emissions• Issues of EM Environment• Coexistence of 802.11, 802.15 with other
equipment types
March 2001
Stephen Berger, TEM ConsultingSlide 9
doc.: IEEE 802.15-01/168r0
Submission
Key Parameters of Mutual Interest
• Maximum transmission amplitude • Maximum & average transmission power• Time domain transmission envelop
• Span and characteristics of developing EM environment from the 2.4 GHz band
• Appropriateness of immunity tests, ad hoc and other
