PROJECT CODEVISION AVR C · PDF filemikrokontroler Atmel AVR dapat mempermudah pemrograman C. CODEVISION AVR C Published By Stefanikha69

CODEVISION AVR C

Dwisnanto Putro, S.T., M.Eng.

Code vision AVR merupakan compiller bagi bahasa pemrograman C, sistem IDEAPG (Integrated Development Environment and Automatic Program Generator) yang di disain khusus untuk keluarga mikrokontroler Atmel AVR dapat mempermudah pemrograman C.

CODEVISION AVR C

Published By Stefanikha69

Sebagai Compiller C, Code Vision AVR telah mengandung hampir semua elemen bahasa pemrograman ANSI C. Dengan disediakannya beberapa fitur tambahan yang merupakan kebutuhan dari arsitektur AVR dan sistem embedded.

CODEVISION AVR C

Published By Stefanikha69

Sistem Integrated Development Environment (IDE) telah disediakan dalam Chip AVR pada System Programmer Software yang memungkinkan mentransfer program secara otomatis ke dalam chip mikrokontroler setelah proses kompilasi sukses.

CODEVISION AVR C

Published By Stefanikha69

System Programer Sofware di disain untuk bekerja secara konjungsi dengan produk Atmel STK500/AVRISP/AVRProg (AVR910 application note), sistem Kanda, STK200+/300, Dontronics DT006, Vogel Elektronik VTEC-ISP, futurlec JRAVR dan Micro Tronics ATCPU/Mega2000 development boards.

CODEVISION AVR C

Published By Stefanikha69

New Project

Run CodeVision

Published By Stefanikha69

Published By Stefanikha69

Chip select

Published By Stefanikha69

configuration chip select

Chip ATMEGA 8535

Clock 11.059200 Mhz

Published By Stefanikha69

Untuk port gunakan PORTC untuk LED

PORTC.0 PORTC.7 = output (0)

Published By Stefanikha69

Save and Generate

Published By Stefanikha69

Save File make folder and files

Published By Stefanikha69

Display

Published By Stefanikha69

Configuration ready compile

Published By Stefanikha69

Published By Stefanikha69

CODE PROGRAM Untuk menyalakan sebuah led misalkan pada posisi PORTC.0 (PORTC memiliki 8 buah PIN. Pin 0-7), maka Dapat dituliskan pada akhir program

yang paling bawah;

while(1){ //Place your code here) PORTC.0=0; PORTC.1=1; PORTC.2=1; PORTC.3=1; PORTC.4=1; PORTC.5=1; PORTC.6=1; PORTC.7=1; } }

Published By Stefanikha69

Penulisan code dengan Cara lain : PORTC= 0b1111110;

Atau

PORTC = 0x7E ; // 1111110

Published By Stefanikha69

SETTING USB DOWNLOADER : INSTALL DEVICE USB DOWNLOADER

CONNECT USB DOWNLOADER TO PC/LAPTOP

SETTING COM PORT: COMPUTER -> MANAGE -> DEVICE MANAGER

PORT (COM &LPT) -> PROLIFIC USB TO SERIAL COMM PORT (COM....)

Published By Stefanikha69

Configuration PORT Programmer

Published By Stefanikha69

Choice :

AVR Chip programmer type

COM PORT

BAUD RATE

Published By Stefanikha69

COMPILER AND BUILD ALL PROGRAM

Or Shift F9

Published By Stefanikha69

Connecting USB Downloader - PC/Laptop - Microcontroller, And....

Published By Stefanikha69

Process Downloading.........

Published By Stefanikha69

FINISH

Published By Stefanikha69

Error DOWNLOADING

Solution : Check COM PORT Check Baud Rate Check Connection Downloader Check Prog/Serial TTL select

Published By Stefanikha69

CV AVR WITH PROTEUS

OPEN PROGRAM ISIS PROTEUS PROFESSIONAL

Published By Stefanikha69

synchronization cv avr with proteus

Creat Project and Design

Double click pict microcntroller

Published By Stefanikha69

synchronization cv avr with proteus

Select clock frequency

Select program file, (HEX file type)

Published By Stefanikha69

synchronization cv avr with proteus

Running ISIS Proteus

FINISH...

Created by. Dwisnanto Putro, Manado, September 2012

Published By Stefanikha69

TASK

BUATLAH project dengan system menyalakan led hanya pada PORTC.1, PORTC.3, PORTC.5, dan PORTC.7 . PORT Yang lainnya MATI

Published By Stefanikha69

TASK

BUATLAH project dengan system menyalakan led hanya pada PORTC.0, PORTC.2, PORTC.4, PORTC.6ndan PORTC.8 . PORT Yang lainnya MATI

Published By Stefanikha69

TASK

BUATLAH project dengan system menyalakan led hanya pada PORTC.1, PORTC.4, PORTC.6, dan PORTC.7. PORT Yang lainnya MATI. Dengan menggunakan cara pengalamatan HEXA.

Published By Stefanikha69

TASK

BUATLAH project dengan system menyalakan led hanya pada PORTC.7, PORTC.6, PORTC.3, PORTC.1 dan PORTC.0. PORT Yang lainnya MATI.

Published By Stefanikha69