Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
8752SPV-FLEX
SEWING CLEVER
www.sip-italy.com
PROGRAMMABLE D/N NEEDLE UNITFOR ALL KIND OF SEWING SEQUENCES IN THE PRODUCTION LINE
8752SPV-FLEX
HIGHLIGTHS• Programmable up to nr. 10 steps;
• Each step programmable for left or right needle operation;
• Multicolor touch screen 3.5” programmed for multi languages;
• Join more operation in one workstation with handling saving;
• Saving of workes, helpers, factory area, spare machinery stock, running cost;
• Simple, friendly and reliable technology;
• Energy saving by direct drive;
• Compensate presser foot;
• Pneumatic presser foot lifter;
• IoT Software for FACTORY 4.0network connectivity by Brother.
Programmable unit split twin needle lockstich complete, large rotary hook, easily programmabe by touch screen for multi-functions operation by single operator.The unit is an example of smart modular workstation.
TECHNICAL DATASewing head utilized: Brother model T-8752C-405,two needle lock stitchlarge rotary hook size
Max sewing speed: 3.000 rpm
Standard needle gauge:6,4 mm = 1/4”
Power supply:220 Volt, mono-phase 50/60 Hz
Power and air consumption:0,5 Kw0,1 liter/cycle at a pressure of 5,5 bar
Size and weight of the workstation:96 x 73 x 140 cm – 140 Kg
EXAMPLES OF USE
Front panel operationSewing sequence
Flap attaching operationSewing sequence
Flap preparationCorner function
Pocket attaching operationCorner function
Front panel operationSewing sequence
PROGRAMMABLE D/N NEEDLE UNITFOR ALL KIND OF SEWING SEQUENCES IN THE PRODUCTION LINE
Manufacture by TOR.MEC AMBROSI S.r.l.Via Maestri del Lavoro, 16 – 37059 – Santa Maria di Zevio – VERONA – ITALY
Ph +39 045 6050205 r.a. – Fax +39 045 6051645 – [email protected]
w w w.sip-italy.com
SEWING CLEVER
recommended by
OPTIONSPatented independent trimming control device for left and right needle item code SIP.A.000711.