1
Date: June 5 & 6 Time: 8:00 a.m. - 5:00 p.m. Course Length: 16 hours Cost: $825 per person Location: Broner Safety 1750 Harmon Auburn Hills, MI 48326 Professional Fall Prevention and Protection Training Open Enrollment Program: Competent Person I Training 2012 800/873-5242 www.millerfallprotection.com Ask the Safety at Height Expert ... Ask Miller. Competent Person I Training Program Topics Overview of Fall Prevention and Protection The Need for Fall Protection Hazard Analysis Recognition of hazards Evaluation criteria Control measures Fall Prevention vs. Protection General Principles of Fall Protection Fall clearance calculations Total fall distance calculations Minimizing fall forces (live demonstrations) Fall Protection on Aerial Lifts and Ladders This two-day, intermediate-level course is designed for facility and site supervisors who must also serve as the competent person required by OSHA 1926.32(f), 1926.500 and 1910 standards, as well as Canadian provincial standards. Participants are assigned tasks which require evaluation for fall hazards. The tasks are described using real-life site photos. The training provides more detailed coverage of the Fall Prevention and Protection Supervisor Training course materials and the program topics listed below. The course also supplies the participant with the knowledge and skills to perform the annual inspection and recordkeeping. Experienced instructors Live demonstrations and hands-on training Addresses site-specific variables and performance requirements of fall prevention and protection Certificate and wallet card issued: valid for 3 years To register contact Miller Fall Prevention and Protection Training at: 888.232.7585 or register online at: www.millerfalltraining.com Rescue • Fall victim • First on the scene • Self-rescue and assisted self-rescue Personal Fall Arrest Systems (Hands-on exercises) Inspection procedures Donning procedures Fit test Selection, application and care of equipment Fall Hazard Task Evaluation (Exercise requiring hazard analysis) Subpart M (Exercise) Competent Person Inspection (Hands-on Practicum) This course hosted by:

Professional Fall Prevention and Protection Trainingshop.bronersafety.com/customer/brglsa/customer...The Need for Fall Protection ... who must also serve as the competent person required

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Professional Fall Prevention and Protection Trainingshop.bronersafety.com/customer/brglsa/customer...The Need for Fall Protection ... who must also serve as the competent person required

Date: June 5 & 6

Time: 8:00 a.m. - 5:00 p.m.

Course Length: 16 hours

Cost: $825 per person

Location: Broner Safety 1750 Harmon Auburn Hills, MI 48326

Professional Fall Prevention and Protection Training

Open Enrollment Program: Competent Person I Training

2012

800/873-5242www.millerfallprotection.com

Ask the Safety at Height Expert ... Ask Miller.▼

Competent Person I Training

Program Topics■ Overview of Fall Prevention and Protection ■ The Need for Fall Protection■ Hazard Analysis • Recognition of hazards • Evaluation criteria • Control measures

■ Fall Prevention vs. Protection■ General Principles of Fall Protection • Fall clearance calculations • Total fall distance calculations • Minimizing fall forces (live demonstrations)

■ Fall Protection on Aerial Lifts and Ladders

This two-day, intermediate-level course is designed for facility and site supervisors who must also serve as the competent person required by OSHA 1926.32(f), 1926.500 and 1910 standards, as well as Canadian provincial standards.

Participants are assigned tasks which require evaluation for fall hazards. The tasks are described using real-life site photos.

The training provides more detailed coverage of the Fall Prevention and Protection Supervisor Training course materials and the program topics listed below.

The course also supplies the participant with the knowledge and skills to perform the annual inspection and recordkeeping.

■ Experienced instructors ■ Live demonstrations and

hands-on training ■ Addresses site-specific

variables and performance requirements of fall prevention and protection

■ Certificate and wallet card issued: valid for 3 years

To register contact Miller Fall Prevention and Protection Training at:

888.232.7585or register online at:

www.millerfalltraining.com

■ Rescue • Fall victim • First on the scene • Self-rescue and assisted self-rescue

■ Personal Fall Arrest Systems (Hands-on exercises) • Inspection procedures • Donning procedures • Fit test • Selection, application and care of equipment

■ Fall Hazard Task Evaluation (Exercise requiring hazard analysis)■ Subpart M (Exercise)■ Competent Person Inspection (Hands-on Practicum)

This course hosted by: