Profab Welding Ltd. (Red Deer) - Century Services · PROFAB WELDING LTD. Red Deer, Alberta. 2 of 31 Image Description ... pipe racks w/ assorted flat bar, square tubing, etc. 10

1 of 31

Image Description

(2) 2012 MW Industries single-wall flat-bottom 400 BBL tanks.

(S/N MWI-4000192 and MWI-4000193).

Diameter: 12'. Height: 20'. Thickness: 3/16". Bottom thickness: 1/4". Sour-sealed gauge board pullies.

Sweetening tower vessel.

Webster 15HP twin-head horizontal air compressor.

Baldor "EM2513T-5" engine.

Lot of assorted shop fluids including gear oil, cutting oil , engine oil,etc.

PROFAB WELDING LTD.Red Deer, Alberta

2 of 31

Image Description


Lot of assorted sawhorses, cutting tables, steel work tables, cutends, assorted work-in progress, etc.

2006 Triton "XT" single axle aluminum 2-snowmobile trailer.

(S/N 4TCSS11066KX41757).

Partial spool of 1" braided cable.

Modern "26120" engine lathe.

26" swing. 4-1/8" bore. 10' bed.

(8) Shop-built pipe rolls.

3 of 31

Image Description


(14) sawhorses.

Shop-built jig table.

(2) material racks w/ contents.

(5) cantilever racks w/ contents.

(12) 72" x 144" x 1/8" sheet inventory.

4 of 31

Image Description


(5) material racks w/ contents.

Lot of assorted end cuts throughout yard.

Slide-in welder deck.

Slide-in welder deck w/ tool boxes.

Stainless steel 1,400L tank.

5 of 31

Image Description


JLG "40RTS" all-terrain scissor lift.

(S/N 0200052960).

Dual power (LPG and electric).

Fifth wheel hitch attachment for forklift.

Shop-built 52' tridem drop-deck trailer.

(NVSN).

Air ride suspension. 255/70R22.5 tires w/ steel buds.

90" x 40' oilfield skid.

12' tandem axle utility trailer.

(NVSN).

6 of 31

Image Description



(NVSN).

(2) cantilever racks w/ contents.

Forklift basket and shop-built stairs.

(52) angle iron tank bottom supports.

Rainbow 12' tandem axle utility trailer.

(NVSN).

7 of 31

Image Description


Lot of assorted stainless steel square tubing and flat bar.

Aluminum tool box.

Assorted load strap ratchets.

(2) crates of assorted cable, hydraulic hose, extension cords, etc.

Lot of assorted extension and step ladders throughout.

8 of 31

Image Description


(2) pipe racks w/ assorted flat bar, square tubing, etc.

10' fork extensions.

Greenlee tubing bender.

Poly tank.

Fuel tank w/ stand.

9 of 31

Image Description


Patrick "AR10C" 20,000LB. all-terrain 2-stage articulating forklift.

(S/N 0720012125).

Cummins diesel engine. 17.5-25 tires.

2006 Deere "325" skid steer loader.

(S/N T00325B124404).

Quick attach. Bucket. Forks.

Mobile warehouse stairs.

(8) Lincoln "Power Mig 255C" mig welders.

Shop-built flange rack.

10 of 31

Image Description


Lot of assorted shop supplies including braided cable slings, cable,etc.

Mastercraft shop compressor.

Challenger "IV Super" steam pressure washer.


(12) assorted pick-up truck tires.

11 of 31

Image Description


Acklands "AK-Matic 1250" mig welder.

Miller "XMT 350 CC/CV" mig welder w/ Miller "22A" wire feed.

Welding cart w/ Miller "22A" wire feed.

Horizontal metal band saw.

(2) Oxyacetylene kits w/ carts.

12 of 31

Image Description


Lincoln "Power Wave" mig welder w/ Lincoln "10M" wire feed.

John Deere "215" ride-on lawn mower.

Ingersoll-Rand "UP6-50PEI-150" screw compressor.

(S/N PG2878U06264).

(2) Miller "Millermatic 252" mig welders.

2005 Promeau "MC03030" 10'x5/8" power rolls.

13 of 31

Image Description


Lincoln "Invertec V350-Pro" mig welder w/ cart.

(11) Lincoln "Power Mig 255XT" mig welders.

Lincoln "Invertec V350-Pro" mig welder w/ Lincoln "LF-72" wire feedand cart.

(4) Miller "XMT 350 CC/CV" mig welders w/ "Miller "22A" wire feedsand carts.

Miller "XMT 350 CC/CV" mig welder w/ "Miller "60 Series" wire feedand cart.

14 of 31

Image Description


Miller "Millermatic 251" mig welder.

Miller "Dimension 652 CC/CV DC" sub arc welder w/ Miller remoteand mobile hoist frame.

(2) Miller "XMT 350 CC/CV" mig welders w/ carts.

(17) welding screens.

(10) shop tables w/ vices.

15 of 31

Image Description


(2) pallet jacks.

(13) metal sawhorses.

Genie "GS-2668RT" all-terrain electric scissor lift.

(NVSN).

Hypertherm "Powermax 1000 G3 Series" plasma cutter w/ cart.

Lot of jack stands, creeper, battery charger, etc.

16 of 31

Image Description


(2) oxyacetylene torch sets w/ gauges and carts.

Floor jack.

Procore roll-away tool cabinet w/ contents.

Small welding table v/ vice.

Lot of assorted plate clamps, nylon and chain lifting chains,clevises, etc.

17 of 31

Image Description


(18) 72"x336"x3/16" sheet inventory.

Milwaukee heavy-duty metal chop saw w/ stand.

Modern "C6256x2000" engine lathe.

3-jaw chuck. 80" bed. 22" swing. 3-1/4" bore. Tool post.

Modern "5VHL" turret milling machine.

(S/N 10056049).

(2) power feeds. Vice.

Ridgid "535" threader.

18 of 31

Image Description


Black job box.

Mobile cart w/ assorted boring bits.

Baldor 8" pedestal grinder.

Modern "Z5040" vertical mill drill w/ vice.

(S/N 30512140).

50-ton hydraulic press w/ cage.

19 of 31

Image Description


2000 Kao Ming "KMR-1600DH" 5'x14" radial drill.

Shop fan.

JTM "HV12" indexing head.

Lot of assorted valves, flanges, couplers, etc.

I-beam spreader beam.

20 of 31

Image Description


Flammable cabinet.

Lot of assorted mig wire, welding stick, welding flux, etc.

Madine 3-ton chain hoist.

Assorted tapered boring bits.

Metal 2-door storage cabinet w/ contents.

21 of 31

Image Description


(6) 1-ton chain hoists.

Lot of floor jack, metal banding cart, shop vac, tiger torches, etc.

Powerfist 120V mig welder.

Torch tracer.

Power pack w/ hydraulic rams.

22 of 31

Image Description


Hypertherm "Powermax 900" plasma cutter.

Assorted mig leads.

(2) Lincoln "LM25" suitcase welders.

Milwaukee mag drill.

NSA SCBA breathing apparatus.

23 of 31

Image Description


Lot of 12-ton pneumatic bender, (2) Makita chop saws, Poulan gaschain saw, assorted power and hand tools, combination wrenchsets, etc.

Gray roll-away tool cabinet w/ top chest and contents.

Inventory contents of cabinets and shelving in "Stores Room".

Metal 2-door storage cabinet w/ contents.

(2) pressure testers

24 of 31

Image Description


Mobile blue parts cart w/ contents.

Mobile tool station w/ aluminum C-clamps, combination wrenches,grinders, power tools, etc.

Enerpac "Turbo 2" hydraulic power pack w/ hydraulic rams.

2005 Calypso "Water Jet HH126" water jet.

2006 FABmasteR "1W-110S" iron worker.

(S/N 369743).

25 of 31

Image Description


AccurPress "732012" press brake.

ETS control. AccurPress CNC back gauge. Assorted dies and punches.

AccurShear "650010" shear.

Back gauge.

Gullco rod oven.

(2) 2005 Pierson "IDRA-10H0" 10,000LB. capacity power rolls.

Mobile parts cart.

26 of 31

Image Description


Haskel "ASF-100" pneumatic fluid pump w/ cart.

Metal material rack w/ assorted solid bar.

Assorted tri-stands throughout shop.

10' single axle tilt deck utility trailer.

(NVSN).

27 of 31

Image Description


2008 Ford "F550 XLT Super Duty" 4x4 dual wheel welding truck.

(S/N 1FDAF57R19EA20046).

V8 Powerstroke diesel engine. Automatic transmission.

Lincoln "Classic 300D" welder.


(S/N 1FDXF47R78RA77726).

V8 Powerstroke diesel engine. Manual transmission.

Lincoln "Classic III D" welder.


(S/N 1FDAF57P46EA98699).



28 of 31

Image Description



(S/N 1FDAF57R18EA06811).



Lot of L-shaped desk, (3) office chairs and 2-drawer file cabinet.

Black leather couch and love seat.

Lot of (2) desks, (2) chairs, monitor and bar fridge.

29 of 31

Image Description


Trade show display.

Lot of file cabinet and office chair.

Lot of (2) 4-drawer vertical file cabinets.

Fellowes "SP97CS" paper shredder.

X-ray film viewer.

30 of 31

Image Description


U-shaped desk.

L-shaped desk.

2009 Ford "F150 XLT" Super Cab 4x4 pick-up cab.

(S/N 1FTPW14V99FA10254).

Automatic transmission. Moon roof. Running boards.

2011 Ford "F150 6.2L Raptor SVT" Super Cab 4x4 pick-up truck.

(S/N 1FTFW1R69BFA63314).

6.2L gas engine. Air intake. Automatic transmission. Moon roof. Powerleather heated seats. Navigation system. Bluetooth capabilities. Runningboards. Tonneau cover. Fox International lift kit. 35x12.50R20LT tires.Moto Metal rims.

EZ-Go electric golf cart.

31 of 31

Image Description


EZ-Go electric golf cart.

2004 GMC "2500HD" extended cab deck truck.

(S/N 1GTHK29074E331097).

Automatic transmission.

2010 Dodge "Ram 3500HD Laramie" Mega Cab 4x4 pick-up truck.

(S/N 3D73Y4HL3AG180427).

Cummins diesel engine. 6-speed manual transmission w/ retarder brake.Moon roof. Power leather heated seats. Navigation system. DVDentertainment system. Power rear slider.

2007 Chevrolet "Tahoe LTZ" sport utility vehicle.

(S/N 1GNFK13027R256269).

Gas engine. Automatic transmission. Moon roof. Power leather seats.Navigation system. DVD entertainment system.

6'x6'x14" 12,230L hydraulic test tank.

1 of 30

Image Description

Lot of (3) file cabinets, bar fridge, microwave, water cooler andframed print.

L-shaped reception desk, stationary cabinet, file cabinet and chair.

L-shaped desk, (2) office chairs, (2) framed prints and bookcase.

Lot of employee lockers, (2) tables, chairs, (3) microwaves, washingmachine, etc.

PROFAB WELDING LTD.Rocky Mountain House, Alberta

2 of 30

Image Description


Lot of (2) truck headache racks and miscellaneous steel.

Lot of turfers and miscellaneous chains.

Lot of Honda gas engine and drill bit sharpener.

Lot of Skihl chain saw, gate valves, hydraulic rams, etc.

Lot of (2) propane heaters and tiger torch w/ tank.

3 of 30

Image Description


Lot of assorted castors, tarps, trade show booth, folding tables, etc.

Lot of hydraulic hose, shop fluids, ladders, fittings, etc.

Lot of chain hoists, plate clamps, clevises, chain slings, etc.

Parts washer.

(16) sections of EZ-Rect shelving.

4 of 30

Image Description


(2) 20' sea containers.

Lot of assorted stainless steel checkered plate, etc.

Tent Events "125" portable heater.

Lot of assorted end cuts and steel rack.

Lot of banding cart, used tires and torque wrench.

5 of 30

Image Description


Lincoln "LN25" suitcase welder and Hobart suitcase welder.

Ridgid tri-stand and assorted tri-stands throughout.

Mod-U-Blast 150 psi sand blast pot.

Jet horizontal metal band saw.

Hyd-Mech "S-20" horizontal metal band saw.

6 of 30

Image Description


Powerfist horizontal metal band saw.

(2) Grayco airless paint sprayers.

Grayco "Xtreme X60" airless paint sprayer.

Yardpro gas lawn mower.

MMLJ sand blast pot.

7 of 30

Image Description


Lot of (3) oxyacetylene carts and wheelbarrow.

John Deere "L118 Limited Edition" ride-on lawn mower.

Sureflame construction heater.

Lot of assorted transformers and electrical switchboxes.

Lot of assorted hydraulic hose, turfer, pipe clamps, chains, cable,etc.

8 of 30

Image Description


Lot of I-beam trolley, 50-ton pneumatic pipe bender, miscellaneousshop supplies, etc.

#5 arbor press w/ stand.

Lot of assorted extension and step ladders.

Lot of assorted metal plate and racks.

(9) parts washer tanks.

9 of 30

Image Description


Lot of assorted cable, air hose, extension cords, etc.

Forklift/crane cage.

Slip tank w/ pump.

(3) tanks.

Single axle portable compressor.

John Deere 4-cylinder diesel engine.

10 of 30

Image Description


Lot of pipe rack w/ assorted I-beam.

Lot of (2) pipe racks w/ assorted drill pipe.

Lot of (3) material racks.

Lot of (2) skid frames.

Lot of (2) pipe racks and (2) 1/2 skids.

11 of 30

Image Description


Lot of (2) pipe racks w/ assorted channel and box steel.

Stahl 5-ton overhead under-slung crane and Kaverit 5-ton overheadunder-slung crane.

(Stahl S/N - 2).(Kaverit S/N 5950).

Crane ways. Buzz bar.

Lot of (2) pipe racks w/ assorted pipe.

Lot of (7) pipe stands, etc.

Crane lifter.

12 of 30

Image Description


Rolling I-beam dolly.

Lot of (2) cantilever racks w/ assorted steel.

2001 Ford "F550 XLT Super Duty" deck truck.

(S/N 1FDAF57F71EB01319).

V8 Powerstroke diesel engine. Manual transmission.


Lot of (3) steel frames and slide-in welder deck.

13 of 30

Image Description


Lot of assorted I-beam cuts.

Lot of pipe rack w/ assorted pipe, flat bar, etc.

Lot of pipe rack w/ channel and box steel.

1995 International "Eagle" single axle picker truck.

(IHC S/N 2HSFLATN8SC025407).(Fassi S/N 7311).

Caterpillar engine. 10-speed transmission.

2007 Fassi "F110A24" picker.

1992 Kenworth "W900" tandem axle crane truck.

(KW S/N 2XKWDB8X1NM928857).(Weldco S/N 3W2139).

Caterpillar engine. 10-speed transmission. Tires. Aluminum buds (front).Steel daytons (rear).

Weldco "Hydra-lift HL20TC70" crane.

14 of 30

Image Description


2001 Trailtech "TD210" tandem axle hi-boy trailer.

(S/N 2CU2BJ3L912008337).

Assorted sawhorses throughout yard.

Lot of (2) pipe racks w/ assorted grating.

Lot of (2) pipe racks w/ box steel.

Lot of (2) forklift extensions and forklift jig crane.

15 of 30

Image Description


Cantilever rack w/ assorted sheet inventory, etc.

Lot of (2) cylinder cages w/ dock.

Lot of (2) pipe racks w/ assorted I-beams.

Lincoln "Classic III D" diesel portable welder.

Lincoln "Ranger 305G" diesel portable welder.

16 of 30

Image Description


Lincoln "Classic II" diesel portable welder.

Drop-in welding rack.

2005 Ford "F450 XLT Super Duty" dual wheel 4x4 welding truck.

(S/N 1FDXFL17P57EA85952).

V8 Powerstroke diesel engine.

Lincoln Classic "300D" welder.

2009 Chevrolet "Silverado LT" 4x4 crew cab pick-up truck.

(S/N 2GEEK133491100891).

Automatic transmission.

17 of 30

Image Description


2008 Ford "F450 XLT Super Duty" Super Cab dual wheel 4x4welding truck.

(S/N 1FTXW43R88EE56339).

V8 Powerstroke diesel engine. Automatic transmission. Bush guard.

Lincoln Classic "Vantage 300" welder.

2008 Chevrolet "3500HD" crew cab dual wheel 4x4 welding truck.

(S/N 1GCJK33638F215851).

Duramax diesel engine. Allison automatic transmission.

Lincoln Classic "300D" welder.

2005 Chevrolet "3500" crew cab dual-wheel 4x4 welding truck.

(S/N 1GCJK33285F824152).

Duramax diesel engine. Allison automatic transmission.

Lincoln "Ranger 305C" welder.

18 of 30

Image Description


2008 Ford "F350 XLT Super Duty Off Road" Super Cab dual wheel4x4 welding truck.

(S/N 1FDXFL17P57EA85952).

V8 Powerstroke diesel engine.

Classic "Vantage 300" welder.

1999 Deere "TC54H" integrated tool carrier.

(S/N DNTC54H572441).

Bucket. Forks. Tires.

Material rack w/ assorted solid bar, channel, angle and flat iron.

Chop saw w/ bench.

19 of 30

Image Description


Lot of (5) adjustable roller stands.

Miller "Millermatic 251" mig welder.

Lincoln "Power Map 350 MP" mig welder.

(2) Lincoln "Power Mig 255XT" mig welders.

Lincoln "Ideal Arc 250" stick welder.

20 of 30

Image Description


(2) Miller "TIG Runner" tig welders w/ Miller "Dynasty 300DX" powersupplies and Miller "Coolmate III".

Lincoln "Power Mig 255" mig welder.


(3) Oxyacetylene torch kits.

(4) Step ladders.

21 of 30

Image Description


Hyd-Mech "S-20 Series II" horizontal metal band saw.

Mobile in-feed table.

Lot of metal shop table, chop saw, swivel vice, Ridgid pipe vice,jacks, etc.

1/2-ton jib crane w/ Powerfist cable hoist.

(4) Welding curtains.

Mobile tool cart w/ contents.

22 of 30

Image Description


Metal shop table w/ manual positioner.

(2) Gullco rod ovens w/ stands.

Metal shop table w/ swivel vice.

Metal shop table w/ vice.

Bolt bin w/ contents.

23 of 30

Image Description


Lincoln "Plasma 20" plasma cutter w/ cart.

Powermate 5HP vertical shop compressor.

Industrial Air portable twin-head compressor.

(2) Pallet jacks.

(2) Bench grinders.

24 of 30

Image Description


SQ50D "Power Drive" power threader.

Skidded pipe tub.

Masteel 48" shear.

Buhler "LD-504" articulated tool carrier.

(S/N 51000053).

QA. Bucket. Forks.

Kingsland "45XM" iron worker.

(S/N 377394).

25 of 30

Image Description


30"x5' power rolls.

RK Machinery 150-ton hydraulic press.

Masteel "12200" hydraulic brake.

(S/N 0312002).

XRY controls. Back gauge.

Masteel "10250" hydraulic shear.

(S/N 0408001).

Back gauge.

Submersible pump w/ rack.

26 of 30

Image Description


A-frame hoist w/ 3-ton chain fall.

Thermal Dynamics "Cutmaster" plasma cutter w/ cart.

King Industrial 22" drill press.

Lot of sawhorses, small shop tables, rolling material stands, tri-stands, etc. throughout.

(6) Bolt bins w/ contents.

27 of 30

Image Description


(2) Metal 2-door storage cabinets w/ shop supplies.

Modern "430X1700" engine lathe.

3-jaw chuck. 2-1/4" bore. 9" swing. 6' bed. Tool post. AcuRite XYZ digitalcontrols.

Lawson Products parts cabinets w/ contents.

CanTek turret mill.

(S/N 600-3800).

Dual power feeds. XYZ digital controls.

Lot of metal storage cabinet w/ contents and metal shop table w/vice.

28 of 30

Image Description


Fire extinguisher lock-up cage.

Flammable cabinet w/ contents.

2003 Ford "F450 XLT Super Duty" dual wheel 4x4 picker truck.

(Ford S/N 1FDXF47PX3EC72517).(Hiab S/N 08101731).

V8 Powerstroke turbo diesel engine. Automatic transmission. Fifth wheelhidden hitch.

2008 Hiab "081RW" knuckle crane.

Lot of (2) Wagner airless paint sprayers, battery charger, assortedboring and drill bits, cordless grease gun, A/C unit, air mover, etc.

29 of 30

Image Description


Lot of Makita chop saw, chain fall, angle grinder, shop vac, nylonstraps, etc.

Lot of (3) metal 2-door storage cabinets w/ torches, rod, power andpneumatic tools, etc.

Lot of floor jack, chop saw, Karcher pressure washer, (2) mobilecarts and step ladder.

Stinger 10-ton collision repair kit.

Lot of assorted inside diameter and outside diameter calipers, etc.

30 of 30

Image Description


Big drilling and tapping quick change attachment.

Lot of (2) taper collet sets.

Narex B&F head boring and facing.

Documents

Profab Welding Ltd. (Red Deer) - Century Services · PROFAB WELDING LTD. Red Deer, Alberta. 2 of 31 Image Description ... pipe racks w/ assorted flat bar, square tubing, etc. 10