ProductsGuide-sheetpile 규격

www.hyundai-steel.com Products Guide제품안내

Wide Flange Beams

Angles

Steel Piles

Rails

Reinforcing Bars

Round Bars

Hot Rolled Coil

Steel Plate

Cold Rolled Stainless Steel Sheets, Coils & Strips

Ingots for Forging

Rolls

Heavy Machinery

www.hyundai-steel.com

Printed, 2010. 4

Products Guide

17H형강

(Wide Flange Beams)

45ㄱ형강

(Angles)

49강널말뚝

(Steel Piles)

50레일

(Rails)

52철근

(Reinforcing Bars)

56원형강

(Round Bars)

58열연코일

(Hot Rolled Coil)

76후판

(Steel Plate)

120스테인리스 강판 및 강대 (Cold Rolled Stainless

Steel Sheets, Coils & Strips)

128인고트

(Ingots for Forging)

134롤

(Rolls)

135중기

(Heavy Machinery)

HYUNDAI STEEL Main Products

Table of Contents

02 회사소개 (Introduction)

04 CEO인사말 (Message from the CEO)

06 연혁 (Company History)

08 제조공정/공장소개 (Manufacturing Process)

10 제품소개 (Products Guide)

17 H형강 (Wide Flange Beams)

42 H형강 말뚝 (H-Bearing Piles)

43 비대칭 H형강 (Asymmetric H-Beams)

43 무늬 H형강 (Checkered H-Beams)

44 경량 H형강 (Junior Beams)

44 I 형강 (I-Beams)

45 광산지보용 I 형강 (I-Beams for Mine Support)

45 등변 ㄱ형강 (Equal Angles)

47 부등변 ㄱ형강 (Unequal Angles)

47 부등변 부등후 ㄱ형강 (Inverted Angles)

48 ㄷ형강 (Channels)

49 평행채널 (Parallel Flange Channels)

49 강널말뚝 (Sheet Piles)

50 철도레일 (Railway Rails)

51 경레일 (Light Rails)

52 철근 (Reinforcing Bars)

56 원형강 (Round Bars)

58 열연코일 (Hot Rolled Coil)

76 후판 (Steel Plate)

120 스테인리스 강판 및 강대

(Cold Rolled Stainless Steel Sheets, Coils & Strips)

128 인고트 (Ingots for Forging)

134 롤 (Rolls)

135 중기 (Heavy Machinery)

137 강재성분표 (Chemical Composition)

140 기계적 성질 (Mechanical Properties)

145 치수 허용차 (Dimensional Tolerance)

148 중량 허용차 (Tolerance on Weight)

149 품질인증현황 (Quality Certification)

157 도량형 환산표 (Conversion Table)

160 주의사항 (Caution)

166 네트워크 (HYUNDAI STEEL Network)

반세기 동안 세계 최고의 철강회사로 성장해온

현대제철은 새롭게 시작하는 마음으로 고객 여러분을

섬기겠습니다.

현대제철은 무한한 가능성과 창조적 시장개척 의지를

기반으로 고객 여러분과 함께 국가경쟁력 향상 및 세계를

주도하는 초일류 기업으로 도약하겠습니다.

현대제철 사명을 부각시킨 심벌 H는 High Spirit(진취적 기상), Harmony(조화),

Humanity(인류애)를 상징합니다.

H의 견고한 양 축은 현대제철의 신•기존 사업과 기업, 고객을 뜻하며 가운데

교량(Bridge)은 양 축의 균형적 만남과 통합으로 성장하는 미래를 의미합니다.

블루컬러는 현대제철이 첨단기술과 신뢰를 바탕으로 밝은

미래 환경의 청사진을 구현하는 선도 기업임을 나타냅니다.

High Spirit, Harmony, Humanity는 현대제철이 도전적이고 혁신적인 기상과

조화를 통해 밝은 미래사회에 공헌하는 세계 최고의 철강기업으로 성장해 나간다는 뜻입니다.

Over the past 50 years, HYUNDAI STEEL has come a long way to become a prime global steel company. Today with a refreshed mind, we are fully committed to serving our customers better. Armed with tremendous growth potentials and experience in creative market exploration, we are now striving to claim global market leadership in steel manufacturing to help upgrade our services and the nation’s competitiveness.

Corporate Introduction (CI)

The symbol ‘H’, which embosses the mission of Hyundai Steel, stands for ‘High Spirit’, ‘Harmony’, and ‘Humanity’. The firm and stable axes on both sides of the ‘H’ imply the past and new businesses and customers. The bridge connecting the two axes suggests a promising future of Hyundai Steel, growing with balanced contact and integration of both axes.The bright blue color shows the leading position of Hyundai Steel in future environmental concerns, proposing a new blueprint based on modern technology and reliability. In other words, High Spirit, Harmony, Humanity collectively represent that Hyundai Steel will grow into a world-leading steel company with high spirit and harmony, thereby contributing to the humanity.

03

Products Guide Hyundai Steel

04 05


Message from the CeO 부회장 인사말

현대제철은 1953년 국내 최초의 철강회사로 탄생한 이래 지난 반세기 동안

국가기간 산업체로서 기초산업의 근간을 세우며 한국 경제발전의 견인차

역할을 해왔습니다.

지난 2000년에는 우리나라 철강산업의 구조조정에 적극 참여하여 강원산업

합병 및 삼미특수강 인수를 통해 철강 전문기업으로 거듭났으며, 2004년 한보

철강을 인수하여 철강산업의 구조조정을 마무리하는 역할을 수행한 바

있습니다. 이로써 인천과 포항, 당진을 아우르는 전국적인 물류거점을

구축하는 한편 한·중·일 FTA 체결시 지리적으로 가장 매력적인 교두보를

확보하게 되었습니다.

현대제철은 효율적인 투자와 경영역량 집중으로 당진공장의 조기 정상화를

이루었으며, 건축용 자재에서부터 철도 레일, 특수강 봉강을 비롯하여

스테인리스 냉연 강판과 열연강판 등 판재류에 이르는 제품 포트폴리오를

구축함으로써 종합 철강회사로의 도약을 앞당기는 기초를 마련하게

되었습니다.

현대제철은 이제 한걸음 더 나아가 종합철강회사로서의 도약을 위해 당진에

일관제철소를 성공적으로 완공하였습니다. 최첨단, 친환경 제철소 건설을

통해 우수한 품질의 자동차 강판과 조선용 후판을 고객에게 공급함으로써

국제 철강시장에서의 탁월한 경쟁력을 키워나갈 것입니다.

현대제철은 지속적인 기술개발과 경영혁신을 통해 우수한 제품 및 최상의

판매서비스를 제공하며 고객만족 경영과 확고한 윤리투명 경영의 정착으로

기업의 신뢰구축에 최선을 다하고 있습니다. 또한, 환경을 경영의 근간으로

삼아 체계적인 환경경영을 실천하고 최첨단 환경설비 및 선진 환경기술을

확보함으로써 환경친화 기업의 역할을 수행함과 아울러, 사회공헌 활동에도

적극 참여하여 인류의 행복한 미래를 향한 지속가능한 기업으로서의 입지를

더욱 다지도록 할 것입니다.

영원히 꺼지지 않는 용광로의 불꽃같은 열정과 강인한 도전정신으로 국내는

물론 세계 경제를 리드하는 글로벌 시장의 주역이 되고자 합니다.

세계 초일류 종합철강회사로 성장해 나가는 현대제철을 지켜봐 주시기

바랍니다.

감사합니다.

Hyundai Steel has played a key role in the Korean steel industry

since founded in 1953 as the first steelmaker.

it actively engaged in restructuring Korean steel industry by

acquiring Kangwon industry and Sammi Steel in 2000. it

continuously consolidated Hanbo Steel in 2004. With the active

engagement, Hyundai Steel established nationwide logistics

including incheon, Pohang and dangjin while securing the most

attractive geographical bridgehead for the time when Korea,

China and Japan conclude Free trade agreement.

Going one step further, Hyundai Steel successfully completed

and integrated steel mill in dangjin to become a general steel

company. By providing its customers with quality automotive

steel sheets and ship steel plates in state-of-the-art,

environmentally friendly still mills, Hyundai Steel will enhance

its competence in the global steel market.

Hyundai Steel shifts its focus from increasing the volume of

steel to maximizing contribution of sustainable development.

engaging with our stakeholders, such as stockholders,

environment, local communities, customers, suppliers and

employers, is also integral to fulfilling our sustainable

development commitments.

through the building of the integrated steel mill, Hyundai Steel

is preparing to make a second breakthrough. We will finally

become a leading player with the pride of the first and passion for

the best.

thank you.

Taking another leap forward,HYUNDAI STEEL startsanother 50 years.

박 승 하현대제철 부회장

Seung Ha, ParkVice Chairman and CeO, Hyundai Steel

06 07


Company History 연혁

1982. 3. 5 대형공장 조업개시 Commissioned a wide flange beam mill

1983. 2. 2 주강공장 조업개시 Commissioned a casting mill

1985. 2. 28 40톤 전기제강공장 개조(50톤으로 증설) expanded 40 ton electric furnace mill to 50 ton mill

1986. 1. 31 60톤 전기제강공장 개조 Converted 60 ton electric furnace mill

1986. 2. 1 철근공장 개조 Converted wire manufacturing mill

1987. 2. 28 30톤 전기제강공장 개조(40톤으로 증설) expanded 30 ton electric furnace mill to 40 ton mill

1987. 5. 23 기업공개 Made a public company

1990. 3. 15 스테인리스 냉연공장 조업개시(연산 5만톤) Commissioned a stainless cold rolled steel mill (50,000 tons/year)

1990. 9. 15 스테인리스 냉연공장 증설(연산 12만톤) expanded stainless cold rolled steel mill (120,000 tons/year)

1992. 1. 30 H형강 110만톤 증설준공 Completed the 1.1 million ton wide flange beams mill

1992. 10. 4 국제철강협회 정회원 가입 Became a full member of the international iron & Steel institute

1993. 12. 19 중형공장 개조 Renovated the shapes mill

1994. 12. 20 90톤 전기제강공장 및 제2철근공장 준공 Completed the 90 ton electric arc furnace mill and second no.2 reinforcing bar mill

1997. 10. 4 기술연구동 준공 Completed the R&d building

1998. 3. 20 120톤 전기제강공장 및 신중형압연공장 준공 Completed the 120 ton electric arc furnace mill and new shapes mill

2000. 3. 15 강원산업(주) 합병 Merged with Kangwon Industries Ltd.

2000. 12. 5 삼미특수강(주) 인수 Acquired Sammi Steel Company Ltd.

2001. 4. 2 현대자동차그룹으로 재출범 Reincorporated into Hyundai Motor Group

2001. 7. 27 INI스틸로 상호변경 Changed name to INI Steel Company

2004. 10. 1 한보철강공업(주) 당진공장 자산인수 acquired dangjin Steelworks (Hanbo iron & Steel) assets

2004. 10. 12 한보철강공업(주) 당진공장 인수합병식 Dangjin Works was merged and acquired

2005. 5. 2 당진 A열연공장 상업생산 개시 Completed commercial test run of dangjin hot rolled

steel mill production

2006. 3. 10 로 상호변경 Changed name to

2006. 9. 8 당진공장 5만톤 부두 개항식 a harbor opening ceremony for ships with a draft of

50,000 tons

2006. 10. 27 당진공장 B열연공장 상업생산 Completion Hyundai hot-rolled steel mill

현대일관제철소 기공식 Ground-breaking ceremony for integrated steel mill

2007. 7. 2 밀폐형 원료처리시설 착공 Ground-breaking ceremony for the closed-loop type raw material treatment facility for the integrated steel mill

2007. 8. 30 내진용 초고장력 H형강 개발 developed high strength H beam steel for seismic design

2008. 6. 30 UN글로벌 컴팩트 가입 Joined ‘un Global Compact’

2008. 10. 31 자기부상열차 레일 개발 developed railways for magnetic levitation train

2008. 12. 15 국제 정보보호경영시스템(ISO 27001) 인증 취득 Obtained information Security Management System Requirements (iSO 27001) Certification

2009. 03. 24 일관제철소 10만톤, 20만톤 부두 준공 Completed 100,000 tons & 200,000 tons berths of integrated steel mill

2009. 03. 30 초고장력 철근 개발 developed high strength Reinforcing bar

2009. 06. 04 현대제철 150톤 초대형 인고트 개발 developed large sized ingots(150 ton)

2009. 08. 24 일관제철소 원료 초도입하 Received integrated steel mill’s first shipment of iron ore

2009. 11. 16 일관제철소 코크스 공장 가동 Began operations of coke plant

2009. 12. 01 일관제철소 소결, 후판공장 가동 Began operations of sintering plant and plate plant in integrated steel mill

2010. 01. 05 일관제철소 1기 고로 화입 및 가동 개시 Fired up No.1 blast furnace; began operations

2010. 01. 11 일관제철소 제강 및 연주공장 가동 개시 Began operations of steel making plant and continuous casting plant in integrated steel mill

2010. 04. 08 일관제철소 준공식 Held opening ceremony of integrated steel mill

1953. 6. 10 대한중공업공사 설립 Established as Korea Heavy Industry Corporation

1962. 11. 10 인천중공업주식회사로 상호변경(민영화) Changed name to incheon Heavy industry Company ltd.

(Privatized)

1964. 9. 1 인천제철주식회사 설립 Established Incheon Iron & Steel Company

1970. 4. 1 인천중공업주식회사를 흡수 합병 Merged with incheon Heavy industry Company ltd.

1972. 5. 31 철근공장 조업개시 Commissioned a wire manufacturing

1973. 7. 5 40톤 전기제강공장 조업개시 Commissioned a 40 ton crude steel facility

1973. 11. 20 선재공장 조업개시 Commissioned a wire rod rolling mill

1975. 5. 8 소형공장 조업개시 Commissioned a mini mill

1978. 6. 22 현대그룹에 편입 Incorporated into Hyundai Group

1979. 3. 27 60톤 전기제강공장 조업개시 Commissioned an electric arc furnace mill

1980~90년대 창업기˜1979 2000년대

08 09


Manufacturing Process 제조공정/공장소개

인천공장 incheon Works총면적 92만㎡에 제강 450만톤과 압연 440만톤의 생산능력을 갖춘 공장입니다. 인천공장은 가좌 하수

종말처리장으로부터 연간 500만톤의 생활하수를 끌어와 정수과정을 통해 공업용수로 재활용하고 있어 친환경

경영을 실천하는 대표적 공장입니다. 2007년 1월 완공된 인천 북항 철재부두는 5만톤급 2선석으로 구성되어

있으며, 탁월한 물류비 절감 및 환경오염 저감효과를 거두고 있습니다.

the plant has a production capability of 4.5 million tons of steelmaking and 4.4 million tons of rolling on a total area of 920,000㎡. it is a representative plant practicing green management since industrial water used at incheon plant is recycled from Gwjwa Water Recycling System by annually treating 5 million tons of sewage. Steel pier at incheon

north Port, completed in January 2007, is composed of 2 wharfs with 50,000 ton capacity and shows excellent reduction in logistics costs and reducing environment pollutions.

포항공장 Pohang Works총면적 66만㎡에 제강 320만톤, 압연 320만톤의 생산능력을 갖춘 공장으로 H형강과 철근, 원형강, 중기 등 다양한

제품을 생산하고 있습니다. 특히 국내에서 유일하게 일반 레일과 고속철도용 레일을 공급할 수 있으며

세계일류상품으로 인정받은 압연롤을 생산하고 있어 국내 압연롤 시장을 주도하고 있습니다. 설비 세대교체를

실행하고 있습니다.

the plant has a production capacity of 3.2 million tons of steelmaking and 3.2 million tons of rolling on a total area of 660,000㎡ and manufactures various products like H-beams, Reinforcing Bars, Round steel and Heavy machineries. the plant especially is the only one supplying rails for high-speed railways and normal railways and

manufacturing rolling recognized as a first-class product in the world and leading domestic rolling markets. the plant is being renovated by replacing selling facilities.

청도공장 Qingdao Factory2000년 7월 중국에 투자한 공장으로 총면적 6만6,000㎡, 굴삭기용 T/ASS’Y 1만5,000대, ROLLER 8,000대의

생산능력을 갖추고 있습니다. 청도공장은 2002년 10월, 가동 2년3개월여 만에 굴삭기 부품인 언더캐리지 시장에서

1위를 차지하는 등 활발하게 중국시장 개척에 임하고 있으며, 50% 가량의 시장을 점유하고 있습니다.

a plant was invested in China in July 2000 and has the production capability of 15,000 units of t/aSS’y for excavators, 8,000 units of roller on total area of 66,000㎡. Hyundai Steel is actively developing the Chinese market with the Chingdao plant, which took first place in the undercarriage market which is a part for excavators within 2 years and 3

months after the start of operations in October 2002 and has about 50% of market share.

당진공장 dangjin Works총면적 740만㎡규모로 크게 A지구와 B지구 그리고 제철소 건설을 위한 C지구로 나눠집니다. A지구는 연산

120만톤 철근공장과 철 스크랩을 원료로 열연강판을 생산하는 A열연 공장으로, B지구는 연산 300만톤의

열연공장으로 구성되어 있습니다. C지구는 일관제철소 건설이 진행되고 있습니다. 당진공장의 조강 생산력은

340만톤이며 철근, 열연강판 등 제품 생산능력은 610만톤의 체제를 갖추고 있습니다. 일관제철소 건설이 완료되면

철강산업의 역사가 새롭게 시작됩니다.

it has a total area of 7,390,000㎡ and broadly divided into a-district, B-district and C-district for constructing iron works. a-district consists of a Reinforcing Bars plant with an annual capacity of 1.2 million tons and hot-rolled steel mill producing hot-rolled steel

with steel scrap as materials. B-district is composed of hot-rolled steel mill with annual capacity of 3 million tons. an integrated steel mill is being constructed in C-district. the capacity to produce crude steel at dangjin Plant is 3.4 million tons and the capacity to produce products like Reinforcing Bars, hot-rolled steel plate is 6.1 million tons. integrated steel mill is constructed in the future, it will bounce Hyundai Steel back and will rewrite the history of Korean steel industry.

Cold Rolled Stainless Steel Coils & Sheets

Hot Rolled Steel CoilsShapes, Bars & Castings

electric arc Furnace

electric arc Furnace

Continuous Casting Machine

Reheating Furnace

Roughing Mill

l.F

V.d

Finishing Mill Coiler

Hot Coil Coil Build-up Cold Rolling (Sendzimir) annealing & Pickling

Coil

Skin Pass

Polishing

Slitting & trimmingCoil

SheetCut to length

l.F V.d

Beam-BlankH-Beam

equal angle

Channel

Heavy Rail

i-Beam Structural tee

unequal angle

Sheet Pile

light Rail

inverted angle

Reinforcing Bar

Round Bar

BloomReheating Furnace

Break down Mill, universal Beam Mill

Break down Mill, Medium Section Mill

Continuous Mill

Billet

Castingingot

VerticalCentrifugal Casting

Finish Machining Roll

Vad/ViC Pouring Heat treatment Furnace

Continuous Casting Machine

10

제품소개 (Products G

uide)

11



uide)

철도레일

Railway Rails30Kg/m ~ 60Kg/m

73Kg/m

70Kg/m

15Kg/m ~ 22Kg/m

30A KSR9106,9110 37A, JISE1101,1120 50N,60,UIC60 ASTMA1,AREA,UIC

73 USERSpec.

70S KNR

15 KSR9101,JISE1103 20,22 BS248,DIN5901

D 10 ~ D 57SD300 SD350 SD400WSD400 SD500WSD500SD600 SD700

(Grade40)(Grade60)

Bar No.3 ~ No.18

19 ~ 250

0.3 ~ 4.0mm

크레인레일

Crane Rails

분기기레일

Point Rails

경레일

Light Rails

철근

Reinforcing Bars

원형강

Round Bars

냉간압연

스테인리스 강판 및 강대

Cold Rolled Stainless SteelSheets, Coils & Strips

SM10C S53CM 10B35MSM15C A105 30MNB4SM20C SCM415(H) SCR440BSM25C SCM420(H) 1050MSM30C SCM435(H) S40CVSSM35C SCM440(H) S45CVMNSM38C SCM445(H) SBC70SM40C SCR415(H) R3SSM43C SCR420(H) R4SM45C SCR435(H) SAE1008SM48C SCR440(H) SAE1012SM50C SCR445(H) S45CRSM53C SMN420(H)S55CRSM55C SMN443(H)SS400SM58C S43BCH SS490S48CM 15B37M SS540

STS304 STS410 STS436L

STS304LSTS430 STS304J1STS316 STS409LSTS316LSTS410L

KSD3503,3515/3051,3707,3708,3709,3711,3723,3724,3752,3754JISG3101,3106/3191A5526ASTMA36-36M,242,283441,572/6-6MBS4360DIN17100/1013IS226/808/1852

KSD3504 JISG3112CANCSA BS4449SAUDIARABIANStandard

ASTMA615

KSD3698JISG4305ASTMA240

명칭

Designation공칭치수

Nominal SizeKS기호

KS Symbol적용 표준 규격

Applicable Standards

Products Guide 제품소개

Products Tables 제품총괄표 치수단위(unit) : mm

H형강

Wide Flange Beams

건축구조용 H형강

Wide Flange Beams For Building Structures

Metric SeriesH100 x 100 ~ H900 x 300

Inch SeriesW4(4" x 4") ~ W36(36"x12")

H190 x 197

H312x234x344 ~ H336x240x350

H100 x 100 ~ H900 x 300

H150 x 75 ~ H350 x 175

125 x 75 ~ 600 x 190

100 x 80 ~ 130 x 100

25 x 25 ~ 250 x 250

100 x 75 ~ 150 x 90

200 x 90 ~ 450 x 125

75 x 40 ~ 380 x 100

100 x 50 ~ 380 x 100

400 x 100 ~ 500 x 200600 x 130 ~ 600 x 180

H형강 말뚝

H - Bearing Piles

무늬 H형강

Checkered H - Beams

비대칭 H형강

Asymmetric H - Beams

경량 H형강

Junior Beams

I형강

I - Beams(Standard Beams)

광산지보용 I형강

I - Beams for Mine Support

등변 ㄱ형강

Equal Angles

부등변 ㄱ형강

Unequal Angles

부등변 부등후 ㄱ형강

Inverted Angles

ㄷ형강

ChannelsTFC

PFC

강널말뚝

Sheet Piles

SS400 SS490 SS540 SM400A SM400B SM490A SM490B SM490YA SM490YB SM520B SHN400 SHN490 SHN520

SS400 SS490 SS540 SM400A SM400B SM490A SM490B SM490YA SM490YB SM520B

SG1 SG2

SY295 SY390

KSD3503,3515/3502/3866F4603

JISG3101,3106/3192A5526

ASTMA36-36M,242,283441,572,992/6-6M

BS4360/4,4848DIN17100/1019,1020,

1025,1026,1028,1029IS226/808/1852EN10025/10034

KSD3503,3515/3502F4603JISG3101,3106/3192A5526ASTMA36-36M,242,283441,572/6-6MBS4360/4,4848DIN17100/1019,1020,1025,1026,1028,1029IS226/808/1852EN10025/10056

KSE4002,JISM2504DIN21544/21541,BS4360/4

KSF4604JISA5528

명칭

Designation공칭치수

Nominal SizeKS기호

KS Symbol적용 표준 규격


Metric SeriesH200 x 200 ~ H400 x 400

Inch SeriesHP8(8" x 8") ~ HP14(14" x 14½")

12


uide)

13



uide)

일반구조용

Rolled Steels for General Structure

* 일반 치수

두께：1.6˜16mm

폭：600˜1,560mm

단중：Max 28 ton

* (두께 및 폭은 강종별 상이함)

용접구조용

Rolled Steels forWelded Structure

열연강판

Hot Rolled Mild SteelPlates, Sheets & Strip

강관용

Hot Rolled Carbon SteelStrip for Pipes & Tubes

고내후성강

Superior Atmospheric Resisting Rolled Steels

기계구조용 탄소강

Carbon Steels forMachine Structural Use

SS330

SS400

SS490

SS540

SM400A,B,C

SM490A,B,C

SM490YB

SPHC,D,E

SPHT1,2,3,4

SPA-H

SM10C~SM58C

SS330

SS400

SS490

SS540

SM400A,B,C

SM490A,B,C

SM490YB

SPHC,D,E

HRS1,2,3,4

SPA-H

S10C~S58C

명칭

Designation

적용표준규격 Applicable Standards

KS JIS

Products Tables 제품총괄표

공칭치수

Nominal Size

열연코일

Hot RolledCoil


명칭

Designation


KS JIS ASTM Others

후판

Steel Plate

선체구조용

Steel Plates forShipbuilding

KRA,B,D,EAH32,AH36,AH40,DH32,DH36,DH40,EH32,EH36,EH40,FH32,FH36,FH40

NKKA,KB,KD,KEKA32,KD32,KE32,KA36,KD36,KE36,KA40,KD40,KE40,KF32,KF36,KF40

ABSA,B,D,EAH32,AH36,AH40,DH32,DH36,DH40,EH32,EH36,EH40,FH32,FH36,FH40

NV,GLA,B,D,EA32,A36,A40,D32,D36,D40,E32,E36,E40,F32,F36,F40

LR,BV,RINAA,B,D,EAH32,AH36,AH40,DH32,DH36,DH40,EH32,EH36,EH40,FH32,FH36,FH40

기계구조용Steel Plates forMechanicalStructure

KSD3752SM10C_SM58C

JISG4051S10C_S58C

보일러 및 압력용기

Steel Plate forBoilers &Pressure Vessels

KSD3560SB410,450,480SB450M,480M

KSD3540SGV410,450,480

KSD3521SPPV235,315,355SPPV410,450,490

JISG3103SB410,450,480

SB450M,480M

JISG3118SGV410,450,480

JISG3115SPV235,315,355SPV410,450,490

JISG3119SBV1ASBV1B,2,3

JISG4109SCMV1,2,3,4

A285GrA,B,C

A515Gr55,60,65,70

A516Gr55,60,65,70

A537Class1,2

A204GrA,B,C

A387Gr2,12,11,21 Gr5,9,91,911

A302GrA,B,C,D

A533GrA,B,C,D

저온용 압력용기

Steel Plates forLow TemperaturePressure Vessels

KSD3541SLA235A,BSLA325A,BSLA360

KSD3586SLN2N255SLN3N255SLN3N275SLN3N440SLN5N590SLN9N520SLN9N590

JISG3126SLA235A,BSLA325A,BSLA360,410

JISG3127SLN2N255SLN3N255SLN3N275SLN3N440SLN5N590SLN9N520SLN9N590

A203GrA,B,D,E,F

A553-1,2

14


uide)

15



uide)

Products Tables 제품총괄표 MEMO

명칭

Designation


KS JIS ASTM Others

후판

Steel Plate

송유관용

Steel Plates forLine Pipes

API5L-A,BX42,X46,X52,X56,X60,X65,X70,X80,X100

해양구조용

Steel Plate forMarine Structure

API-2HGr42,50API-2WGr42,50,60

내후성강

AtmosphericCorrosionResistantSteel Plates

KSD3529SMA400A,B,CSMA490A,B,CSMA570

JISG3114SMA400A,B,CSMA490A,B,CSMA570

구조용

StrcuturalSteel Plates

KSD3503SS330,400,490

KSD3515SM400A,B,CSM490A,B,CSM490YA,YBSM520B,CSM570

KSD3861SN400A,B,CSN490B,C

JISG3101SS330,400,490

JISG3106SM400A,B,CSM490A,B,CSM490YA,YBSM520B,CSM570

JISG3136SN400A,B,CSN490B,C

A283GrA,B,C,DA36A572Gr42,50,60,65A573Gr70A709Gr36,50

S235,275,355

16


uide)

17


형강 (W

ide Flange Beam

s)

H

1. Wide Flange Beams H형강

(1) Metric Series KS D 3503, 3515/3502

Dimensions and Sectional Properties 치수 및 단면성능

주강품

Steel Casting Products

단조용 인고트

Ingots for Forging

압연용 주조 롤

Cast Rolls forRolling Mill

max. 180 ton

max. 80 ton

Static Castingmax. 60 tonmax. 1600

Centrifugal Casting Rolls:

max.1500 x max. 60 tonSleeves:

max. 1900 x 1100mm(Length)

Pitch 135 ~ 228Link Assembly

Shoe

SC SCMn, SCMnH,SCMnCr

SF, SCMSNCM, SCr, SFVA

Low Carbon SteelHigh Carbon Steel

Ductile Definite Chilled

Indefinite Chilled High Chromium High Speed Steel

15B37M

15B23M

15B23M

JIS Spec.

JIS Spec.

Hot Strip MillSection Mill Plate Mill Beam Mill Bar Mill

Link Pitch

Link Pitch

USER Spec.

명칭

Designation공급능력

Capacity재질

Material적용 표준 규격



Pitch 135 ~ 228 (6T ~ 16T)슈 압연소재

Shoe Roll Bar

공칭치수 NominalSize(mm)

표준 단면 치수 Standard Sectional

Dimension(mm)

단면적Sectional

Area(cm2)

단위무게Unit

Weight(kg/m)

단면 2차 모멘트Moment of

Inertia(cm4)

단면 2차 반경Radius ofGyration

(cm)

단면계수 Modulus of

Section(cm3)

휨단면성능Flexible

Properties(cm)(cm-1)

소성단면계수Plastic

Modulus(cm3)

뒤틀림상수

Warping Constant

(cm6)

비틀림상수

Torsional Constant

(cm4)H x B t1 t2 r A W Ix Iy ix iy Sx Sy rt H/Af Zx Zy Cw J

100 x 100 100 x 100 6 8 10 21.9 17.2 383 134 4.18 2.47 76.5 26.7 2.73 1.250 87.6 41.2 2,830 5.17

125 x 125 125 x 125 6.5 9 10 30.31 23.8 847 293 5.29 3.11 136 47 3.43 1.110 154 71.9 9,870 8.43

150 x 75 150 x 75 5 7 8 17.85 14.0 666 49.5 6.11 1.66 88.8 13.2 1.96 2.860 102 20.8 2,530 2.81

150 x 100 148 x 100 6 9 11 26.84 21.1 1,020 151 6.17 2.37 138 30.1 2.65 1.650 157 46.7 7,270 7.37

150 x 150 150 x 150 7 10 11 40.14 31.5 1,640 563 6.39 3.75 219 75.1 4.12 1.000 246 115 27,600 13.5

200 x 100198 x 99 4.5 7 11 23.18 18.2 1,580 114 8.26 2.21 160 23 2.57 2.500 180 35.7 10,400 3.86

200 x 100 5.5 8 11 27.16 21.3 1,840 134 8.24 2.22 184 26.8 2.6 2.500 209 41.9 12,300 5.77

200 x 150 194 x 150 6 9 13 39.01 30.6 2,690 507 8.3 3.61 277 67.6 4.03 1.440 309 104 43,400 10.9

200 x 200

200 x 200 8 12 13 63.53 49.9 4,720 1,600 8.62 5.02 472 160 5.5 0.835 525 244 142,000 29.8

200 x 204 12 12 13 71.53 56.2 4,980 1,700 8.35 4.88 498 167 5.53 0.817 565 257 150,000 39.6

208 x 202 10 16 13 83.69 65.7 6,530 2,200 8.83 5.13 628 218 5.61 0.643 710 332 203,000 66.7

250 x 125248 x 124 5 8 12 32.68 25.7 3,540 255 10.4 2.79 285 41.1 3.23 2.500 319 63.6 36,700 6.74

250 x 125 6 9 12 37.66 29.6 4,050 294 10.4 2.79 324 47 3.26 2.220 366 73.1 42,700 9.68

250 x 175 244 x 175 7 11 16 56.24 44.1 6,120 984 10.4 4.18 502 113 4.68 1.270 558 173 134,000 23.2

250 x 250

244 x 252 11 11 16 82.06 64.4 8,790 2,940 10.3 5.98 720 233 6.76 0.880 805 358 399,000 39.5

248 x 249 8 13 16 84.7 66.5 9,930 3,350 10.8 6.29 801 269 6.84 0.766 883 408 462,000 46.7

250 x 250 9 14 16 92.18 72.4 10,800 3,650 10.8 6.29 867 292 6.87 0.715 960 444 508,000 58.7

250 x 255 14 14 16 104.7 82.2 11,500 3,880 10.5 6.09 919 304 6.9 0.700 1,040 468 540,000 79.0

300 x 150298 x 149 5.5 8 13 40.8 32.0 6,320 442 12.4 3.29 424 59.3 3.84 2.500 475 91.8 92,900 8.65

300 x 150 6.5 9 13 46.78 36.7 7,210 508 12.4 3.29 481 67.7 3.87 2.220 542 105 107,000 12.4

300 x 200294 x 200 8 12 18 72.38 56.8 11,300 1,600 12.5 4.71 771 160 5.32 1.220 859 247 319,000 35.8

298 x 201 9 14 18 83.36 65.4 13,300 1,900 12.6 4.77 893 189 5.38 1.060 1,000 291 383,000 53.4

300 x 300

294 x 302 12 12 18 107.7 84.5 16,900 5,520 12.5 7.16 1,150 365 8.09 0.812 1,280 560 1,097,000 61.4

298 x 299 9 14 18 110.8 87.0 18,800 6,240 13 7.5 1,270 417 8.19 0.712 1,390 634 1,258,000 71.3

300 x 300 10 15 18 119.8 94.0 20,400 6,750 13.1 7.51 1,360 450 8.23 0.666 1,500 684 1,372,000 88.1

300 x 305 15 15 18 134.8 106.0 21,500 7,100 12.6 7.26 1,440 466 8.23 0.656 1,610 716 1,443,000 116

304 x 301 11 17 18 134.8 106.0 23,400 7,730 13.2 7.57 1,540 514 8.29 0.593 1,710 781 1,592,000 125

310 x 305 15 20 18 165.3 130.0 28,150 9,460 13.2 7.6 1,810 620 8.39 0.508 2,080 949 1,991,000 215

310 x 310 20 20 18 180.8 142.0 29,390 9,940 12.8 7.5 1,890 642 8.44 0.500 2,200 992 2,093,000 271

350 x 175

346 x 174 6 9 14 52.68 41.4 11,100 792 14.5 3.88 641 91 4.51 2.210 716 140 225,000 13.6

350 x 175 7 11 14 63.14 49.6 13,600 984 14.7 3.95 775 112 4.58 1.820 868 174 283,000 23.0

354 x 176 8 13 14 73.68 57.8 16,100 1,180 14.8 4.01 909 134 4.65 1.550 1.020 208 344,000 36.1

18

형강 (W

ide Flange Beam

s)

H

19


형강 (W

ide Flange Beam

s)

H



Dimension(mm)

단면적Sectional

Area(cm2)

단위무게Unit

Weight(kg/m)


Inertia(cm4)


(cm)


Section(cm3)




Modulus(cm3)

뒤틀림상수

Warping Constant

(cm6)

비틀림상수

Torsional Constant


340 x 250336 x 249 8 12 20 88.15 69.2 18,500 3,090 14.5 5.92 1,100 248 6.63 1.130 1,220 380 811,000 44.6

340 x 250 9 14 20 101.5 79.7 21,700 3,650 14.6 6.00 1,280 292 6.71 0.972 1,410 447 970,000 66.3

350 x 350338 x 351 13 13 20 135.3 106 28,200 9,380 14.4 8.33 1,670 534 9.42 0.740 1,850 872 2,477,000 90.3

344 x 348 10 16 20 146 115 33,300 11,200 15.1 8.78 1,940 646 9.56 0.618 2,120 980 3,024,000 121

350 x 350

344 x 354 16 16 20 166.6 131 35,300 11,800 14.6 8.43 2,050 669 9.54 0.608 2,250 1,020 3,186,000 164

350 x 350 12 19 20 173.9 137 40,300 13,600 15.2 8.84 2,300 776 9.65 0.526 2,550 1,180 3,721,000 199

350 x 357 19 19 20 191.4 156 42,800 14,400 14.7 8.53 2,450 809 9.68 0.515 2,760 1,240 3,953,000 270

400 x 200

396 x 199 7 11 16 72.16 56.6 20,000 1,450 16.7 4.48 1,010 145 5.19 1.810 1,130 224 536,000 27.1

400 x 200 8 13 16 84.12 66 23,700 1,740 16.8 4.54 1,190 174 5.26 1.540 1,330 268 650,000 42.2

404 x 201 9 15 16 96.16 75.5 27,500 2,030 16.9 4.6 1,360 202 5.32 1.340 1,530 312 769,000 62.3

400 x 300386 x 299 9 14 22 120.1 94.3 33,700 6,240 16.7 7.81 1,740 418 8.02 0.923 1,920 637 2,160,000 79.9

390 x 300 10 16 22 136 107 38,700 7,210 16.9 7.28 1,980 481 8.09 0.813 2,190 733 2,521,000 114

400 x 400

388 x 402 15 15 22 178.5 140 49,000 16,300 16.6 9.54 2,520 809 10.8 0.643 2,800 1,240 5,655,000 156

394 x 398 11 18 22 186.8 147 56,100 18,900 17.3 10.1 2,850 951 10.9 0.552 3,120 1,440 6,688,000 194

394 x 405 18 18 22 214.4 168 59,700 20,000 16.7 9.65 3,030 985 11 0.536 3,390 1,510 7,053,000 264

400 x 400 13 21 22 218.7 172 66,600 22,400 17.5 10.1 3,330 1,120 11.1 0.473 3,670 1,700 8,048,000 303

400 x 408 21 21 22 250.7 197 70,900 23,800 16.8 9.75 3,540 1,170 11.1 0.465 3,990 1,790 8,550,000 415

406 x 403 16 24 22 254.9 200 78,000 26,200 17.5 10.1 3,840 1,300 11.2 0.417 4,280 1,980 9,558,000 462

414 x 405 18 28 22 295.4 232 92,800 31,000 17.7 10.2 4,480 1,530 11.4 0.360 5,030 2,330 11,557,000 714

428 x 407 20 35 22 360.7 283 119,000 39,400 18.2 10.4 5,570 1,930 11.8 0.290 6,310 2,940 15,198,000 1317

458 x 417 30 50 22 528.6 415 187,000 60,500 18.8 10.7 8,170 2,900 11.8 0.219 9,540 4,440 25,188,000 3885

498 x 432 45 70 22 770.1 605 298,000 94,000 19.7 11.1 13,000 4,370 12.3 0.165 14,400 6,720 43,214,000 11063

450 x 200446 x 199 8 12 18 84.3 66.2 28,700 1,580 18.5 4.33 1,290 159 5.11 1.870 1,450 247 744,000 38.3

450 x 200 9 14 18 96.76 76 33,500 1,870 18.6 4.4 1,490 187 5.18 1.610 1,680 291 889,000 56.9

450 x 300434 x 299 10 15 24 135 106 46,800 6,690 18.6 7.04 2,160 448 7.94 0.967 2,380 686 2,937,000 104

440 x 300 11 18 24 157.4 124 56,100 8,110 18.9 7.18 2,550 541 8.05 0.815 2,820 828 3,611,000 163

500 x 200

496 x 199 9 14 20 101.3 79.5 41,900 1,840 20.3 4.27 1,690 185 5.08 1.780 1,910 290 1,072,000 60.8

500 x 200 10 16 20 114.2 89.6 47,800 2,140 20.5 4.33 1,910 214 5.14 1.560 2,180 335 1,254,000 85.9

506 x 201 11 19 20 131.3 103 56,500 2,580 20.7 4.43 2,230 254 5.23 1.330 2,540 401 1,530,000 132

500 x 300482 x 300 11 15 26 145.5 114 60,400 6,760 20.4 6.82 2,500 451 7.83 1.070 2,790 695 3,688,000 118

488 x 300 11 18 26 163.5 128 71,000 8,110 20.8 7.04 2,910 541 7.97 0.903 3,230 830 4,481,000 172



Dimension(mm)

단면적Sectional

Area(cm2)

단위무게Unit

Weight(kg/m)


Inertia(cm4)


(cm)


Section(cm3)




Modulus(cm3)

뒤틀림상수

Warping Constant

(cm6)

비틀림상수

Torsional Constant


600 x 200

596 x 199 10 15 22 120.5 94.6 68,700 1,980 23.9 4.05 2,310 199 4.95 2.000 2,650 315 1,671,000 82.4

600 x 200 11 17 22 134.4 106 77,600 2,280 24 4.12 2,590 228 5.01 1.770 2,980 361 1,936,000 113

606 x 201 12 20 22 152.5 120 90,400 2,720 24.3 4.22 2,980 271 5.11 1.510 3,430 429 2,336,000 167

612 x 202 13 23 22 170.7 134 103,000 3,180 24.6 4.31 3,380 314 5.19 1.320 3,890 498 2,755,000 237

600 x 300

582 x 300 12 17 28 174.5 137 103,000 7,670 24.3 6.63 3,530 511 7.74 1.140 3,960 793 6,121,000 173

588 x 300 12 20 28 192.5 151 118,000 9,020 24.8 6.85 4,020 601 7.87 0.980 4,490 928 7,275,000 241

594 x 302 14 23 28 222.4 175 137,000 10,600 24.9 6.9 4,620 701 7.96 0.856 5,200 1,080 8,628,000 356

700 x 300

692 x 300 13 20 28 211.5 166 172,000 9,020 28.6 6.53 4,980 602 7.71 1.150 5,630 936 10,189,000 260

700 x 300 13 24 28 235.5 185 201,000 10,800 29.3 6.78 5,760 722 7.86 0.973 6,460 1,120 12,367,000 383

708 x 302 15 28 28 273.6 215 237,000 12,900 29.4 6.86 6,700 853 7.97 0.837 7,560 1,320 14,897,000 588

800 x 300

792 x 300 14 22 28 243.4 191 254,000 9,930 32.3 6.39 6,410 662 7.65 1.200 7,290 1,040 14,720,000 341

800 x 300 14 26 28 267.4 210 292,000 11,700 33 6.62 7,290 782 7.8 1.030 8,240 1,220 17,569,000 486

808 x 302 16 30 28 307.6 241 339,000 13,800 33.2 6.7 8,400 915 7.89 0.892 9,530 1,430 20,902,000 726

900 x 300

890 x 299 15 23 18 266.8 210 339,000 10,300 35.6 6.2 7,610 687 7.51 1.290 8,910 1,080 19,308,000 361

900 x 300 16 28 18 305.8 240 404,000 12,600 36.4 6.43 8,990 842 7.68 1.070 10,500 1,320 24,015,000 580

912 x 302 18 34 18 360.1 283 491,000 15,700 36.9 6.56 10,800 1,040 7.84 0.888 12,500 1,630 30,169,000 979

918 x 303 19 37 18 387.4 304 535,000 17,200 37.2 6.67 11,700 1,140 7.8 0.819 13,400 1,780 33,391,000 1234

20

형강 (W

ide Flange Beam

s)

H

21


형강 (W

ide Flange Beam

s)

H

공칭규격 단중

표준 단면 치수

(mm)단면적

(cm2)단면 2차 MOMeNT

(cm4)단면 2차 반경

(cm)단면계수

(cm3)

lb H B t1 t2 R AReA Ix Iy ix iy Zx Zy

W27x10

114 170.0 693.2 255.8 14.5 23.6 15.2 216 170,027 6,607 28.03 5.53 4905.8 516.6

102 152.0 688.1 254.4 13.1 21.1 15.2 194 150,740 5,798 27.89 5.47 4381.4 455.9

94 140.0 683.8 253.7 12.4 18.9 15.2 178 136,129 5,165 27.62 5.38 3981.7 407.1

84 125.0 678.4 253.0 11.7 16.3 15.2 160 118,449 4,397 27.23 5.25 3491.8 347.6

W24x12¾

250 372.0 669.0 334.9 26.4 48.0 16.5 475 353,940 30,148 27.29 7.96 10580.6 1800.4

229 341.0 660.9 333.0 24.4 43.9 16.5 435 319,066 27,117 27.09 7.90 9655.4 1628.7

207 307.0 653.0 330.5 22.1 39.9 16.5 393 284,636 24,041 26.93 7.83 8717.3 1455.0

192 285.0 646.9 328.9 20.6 37.1 16.5 364 261,203 22,042 26.78 7.78 8075.1 1340.3

176 262.0 641.1 327.4 19.1 34.0 16.5 334 237,291 19,946 26.64 7.72 7402.7 1218.4

162 241.0 635.0 329.1 17.9 31.0 16.5 309 216,119 18,433 26.45 7.73 6806.9 1120.4

146 217.0 628.4 327.7 16.5 27.7 16.5 278 191,551 16,257 26.23 7.64 6096.5 992.3

131 195.0 621.8 326.5 15.4 24.4 16.5 250 168,123 14,168 25.95 7.53 5407.7 867.8

117 174.0 616.2 325.1 14.0 21.6 16.5 223 147,922 12,382 25.77 7.46 4801.1 761.7

104 155.0 611.1 323.9 12.7 19.1 16.5 198 129,957 10,796 25.59 7.37 4253.0 666.7

W24x9

94 140.0 617.5 230.3 13.1 22.2 12.7 179 112,328 4,534 25.07 5.04 3638.3 393.8

84 125.0 612.1 229.1 11.9 19.6 12.7 159 98,537 3,929 24.86 4.96 3219.4 343.0

76 112.0 607.6 228.3 11.2 17.3 12.7 144 87,373 3,435 24.61 4.88 2876.2 300.9

68 101.0 602.7 227.7 10.5 14.9 12.7 129 76,126 2,931 24.25 4.76 2526.0 257.4

W24x762 92.0 603.0 178.8 10.9 15.0 12.7 118 64,578 1,435 23.44 3.49 2141.9 160.5

55 82.0 598.7 177.9 10.0 12.8 12.7 105 56,020 1,210 23.15 3.40 1871.5 136.0

W21x12¼

223 331.0 593.1 321.9 25.4 45.5 12.7 422 247,646 25,358 24.23 7.75 8351.0 1575.3

201 300.0 585.0 319.4 23.1 41.4 12.7 382 220,979 22,540 24.05 7.68 7555.3 1411.4

182 272.0 577.1 317.5 21.1 37.6 12.7 346 197,042 20,095 23.87 7.62 6828.8 1265.8

166 248.0 571.0 315.5 19.1 34.5 12.7 315 177,944 18,106 23.77 7.58 6232.8 1147.9

147 219.0 560.3 317.8 18.3 29.2 12.7 279 151,163 15,647 23.28 7.49 5395.6 984.8

132 196.0 554.5 316.0 16.5 26.3 12.7 250 134,218 13,843 23.15 7.44 4841.2 876.2

122 182.0 550.7 314.7 15.2 24.4 12.7 231 123,261 12,683 23.08 7.40 4476.7 806.0

111 165.0 546.4 313.4 14.0 22.2 12.7 211 111,314 11,419 22.98 7.36 4074.8 728.6

101 150.0 542.5 312.2 12.7 20.3 12.7 192 100,774 10,312 22.91 7.33 3714.9 660.7

공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


W3636x12

210 312.51 931.9 309.4 21.08 34.54 30 403.33 557,300 17,100 37.2 6.52 12,000 1,110

194 288.70 926.8 307.7 19.43 32.00 30 372.42 512,400 15,600 37.1 6.48 11,100 1,010

182 270.85 922.8 306.7 18.42 29.97 30 350.51 479,000 14,500 37.0 6.43 10,400 946

170 252.99 918.7 305.6 17.27 27.94 30 327.58 445,300 13,300 36.9 6.38 9,690 871

160 238.11 914.7 304.8 16.51 25.91 30 308.22 414,400 12,300 36.7 6.31 9,060 807

150 223.22 910.6 304.2 15.88 23.88 30 290.02 384,600 11,200 36.4 6.23 8,450 736

135 200.90 903.0 303.5 15.24 20.07 30 261.06 333,000 9,400 35.7 6.00 7,380 619

W3333x11½

169 251.50 859.0 292.1 17.02 30.99 30 324.43 394,200 12,900 34.9 6.31 9,180 883

152 226.20 850.6 293.8 16.13 26.80 30 293.66 347,100 11,400 34.4 6.22 8,160 776

141 209.83 845.8 293.0 15.37 24.38 30 273.01 317,700 10,300 34.1 6.13 7,510 703

130 193.46 840.5 292.4 14.73 21.72 30 252.21 287,000 9,090 33.7 6.00 6,830 622

118 175.60 834.6 291.6 13.97 18.80 30 228.80 253,300 7,800 33.3 5.84 6,070 535

W3030x10½

191 284.24 779.3 382.0 18.03 30.10 28 366.43 387,200 28,000 32.5 8.74 9,940 1,470

173 257.45 773.2 380.6 16.64 27.05 28 332.30 346,700 24,900 32.3 8.66 8,970 1,310

148 220.25 779.0 266.2 16.51 29.97 28 285.08 283,500 9,470 31.5 5.76 7,280 712

132 196.44 769.9 267.8 15.62 25.40 28 255.11 245,400 8,170 31.0 5.66 6,380 610

124 184.53 766.3 267.1 14.86 23.62 28 239.75 228,500 7,530 30.9 5.61 5,960 564

116 172.63 762.3 266.6 14.35 21.59 28 225.10 210,800 6,850 30.6 5.52 5,530 514

108 160.72 757.7 266.1 13.84 19.30 28 208.95 191,300 6,090 30.3 5.40 5,050 458

99 147.33 753.1 265.4 13.21 17.02 28 192.00 171,700 5,330 29.9 5.27 4,560 402

90 133.93 750.1 264.2 11.94 15.49 28 174.42 155,800 4,780 29.9 5.24 4,150 362

W3030x10½

191 284.24 779.3 382.0 18.03 30.10 28 366.43 387,200 28,000 32.5 8.74 9,940 1,470

173 257.45 773.2 380.6 16.64 27.05 28 332.30 346,700 24,900 32.3 8.66 8,970 1,310

148 220.25 779.0 266.2 16.51 29.97 28 285.08 283,500 9,470 31.5 5.76 7,280 712

132 196.44 769.9 267.8 15.62 25.40 28 255.11 245,400 8,170 31.0 5.66 6,380 610

124 184.53 766.3 267.1 14.86 23.62 28 239.75 228,500 7,530 30.9 5.61 5,960 564

116 172.63 762.3 266.6 14.35 21.59 28 225.10 210,800 6,850 30.6 5.52 5,530 514

108 160.72 757.7 266.1 13.84 19.30 28 208.95 191,300 6,090 30.3 5.40 5,050 458

99 147.33 753.1 265.4 13.21 17.02 28 192.00 171,700 5,330 29.9 5.27 4,560 402

90 133.93 750.1 264.2 11.94 15.49 28 174.42 155,800 4,780 29.9 5.24 4,150 362

(2) Inch Series

22

형강 (W

ide Flange Beam

s)

H

23


형강 (W

ide Flange Beam

s)

H

공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


W16x5½31 46.1 403.4 140.3 7.0 11.2 10.2 59 15,601 516 16.28 2.96 773.5 73.6

26 38.8 398.5 139.7 6.4 8.8 10.2 50 12,544 399 15.91 2.84 629.5 57.2

W14x14½

132 196.0 372.4 374.0 16.4 26.2 15.2 250 63,714 22,828 15.96 9.55 3422.1 1220.7

120 179.0 367.8 372.6 15.0 23.9 15.2 228 57,280 20,599 15.85 9.51 3114.8 1105.6

HP117 174.0 360.9 378.1 20.4 20.4 15.2 222 50,938 18,444 15.15 9.11 2822.5 975.7

109 162.0 363.7 371.0 13.3 21.8 15.2 207 51,553 18,595 15.79 9.48 2834.7 1002.5

HP102 152.0 355.9 375.5 17.9 17.9 15.2 194 43,816 15,825 15.04 9.04 2462.6 842.8

99 147.0 359.7 370.0 12.3 19.8 15.2 188 46,228 16,726 15.68 9.43 2570.6 904.2

90 134.0 356.1 368.8 11.2 18.0 15.2 171 41,585 15,083 15.60 9.40 2335.5 818.0

HP89 132.0 351.3 373.3 15.6 15.6 15.2 169 37,624 13,551 14.94 8.97 2142.1 726.1

HP73 108.0 345.7 370.5 12.8 12.8 15.2 138 30,330 10,877 14.82 8.88 1754.7 587.2

W14x10

82 122.0 363.5 257.3 13.0 21.7 15.2 155 36,702 6,174 15.38 6.31 2019.5 479.9

74 110.0 359.9 255.8 11.4 19.9 15.2 141 33,118 5,567 15.35 6.29 1840.3 435.3

68 101.0 356.6 254.9 10.5 18.3 15.2 129 30,072 5,052 15.27 6.26 1686.5 396.4

61 91.0 352.8 253.9 9.5 16.4 15.2 116 26,645 4,472 15.18 6.22 1510.5 352.3

W14x8

53 79.0 353.6 204.7 9.4 16.8 15.2 101 22,536 2,401 14.96 4.88 1274.8 234.6

48 72.0 350.3 204.0 8.6 15.1 15.2 91 20,171 2,140 14.87 4.84 1151.7 209.9

43 64.0 347.0 203.1 7.7 13.5 15.2 81 17,815 1,881 14.79 4.81 1026.9 185.3

W14x6¾

38 57.8 358.1 172.0 7.9 13.1 10.2 72 16,038 1,110 14.92 3.93 895.6 129.1

34 51.0 355.1 171.3 7.2 11.6 10.2 65 14,135 970 14.80 3.88 796.1 113.2

30 44.0 351.5 170.9 6.9 9.8 10.2 57 12,096 815 14.56 3.78 688.2 95.4

W14x526 39.0 353.3 127.6 6.5 10.7 10.2 50 10,210 371 14.34 2.73 578.0 58.1

22 32.9 349.0 127.0 5.8 8.5 10.2 42 8,286 291 14.06 2.64 474.9 45.9

W12x12

190 286.0 365.3 321.8 26.9 44.1 15.2 360 78,747 24,531 14.79 8.25 4311.9 1524.5

170 253.0 356.4 319.3 24.4 39.6 15.2 323 68,478 21,532 14.57 8.17 3843.2 1348.8

152 226.0 348.2 317.0 22.1 35.6 15.2 289 59,621 18,907 14.37 8.09 3424.2 1192.9

136 202.0 340.6 315.0 20.1 31.8 15.2 258 51,788 16,556 14.18 8.02 3040.9 1051.3

120 179.0 333.2 312.9 18.0 28.1 15.2 228 44,577 14,351 13.99 7.94 2675.3 917.2

106 158.0 327.4 310.4 15.5 25.1 15.2 201 38,847 12,544 13.90 7.90 2373.0 808.3

96 143.0 322.8 308.9 14.0 22.9 15.2 182 34,669 11,235 13.81 7.86 2147.8 727.5

87 129.0 318.3 308.0 13.1 20.6 15.2 165 30,803 10,024 13.66 7.80 1935.7 650.9

HP84 125.0 311.9 312.3 17.4 17.4 15.2 159 27,041 8,847 13.05 7.46 1733.9 566.6

공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


W21x8¼

93 138.0 549.1 213.9 14.7 23.6 12.7 176 86,185 3,866 22.11 4.68 3138.9 361.5

83 123.0 544.3 212.2 13.1 21.2 12.7 157 76,253 3,389 22.03 4.65 2801.8 319.4

73 109.0 539.5 210.7 11.6 18.8 12.7 139 66,740 2,938 21.94 4.60 2474.2 278.8

68 101.0 536.7 210.1 10.9 17.4 12.7 129 61,660 2,694 21.84 4.56 2297.7 256.5

62 92.0 533.1 209.3 10.2 15.6 12.7 118 55,355 2,392 21.68 4.51 2076.5 228.6

W21x6½

57 85.0 534.9 166.5 10.3 16.5 12.7 108 48,643 1,276 21.22 3.44 1818.7 153.2

50 74.0 529.1 165.9 9.7 13.6 12.7 95 40,977 1,038 20.78 3.31 1549.0 125.2

44 66.0 524.8 165.1 8.9 11.4 12.7 84 35,088 861 20.47 3.21 1337.3 104.3

W18x11

211 315.0 525.0 293.5 26.9 48.5 10.2 401 180,199 20,514 21.20 7.15 6864.5 1397.9

192 286.0 516.9 291.0 24.4 44.5 10.2 364 161,090 18,301 21.04 7.09 6233.0 1258.0

175 260.0 509.0 288.9 22.6 40.4 10.2 331 143,642 16,277 20.83 7.01 5643.9 1126.7

158 235.0 500.9 287.0 20.6 36.6 10.2 299 127,213 14,446 20.63 6.95 5079.5 1006.6

143 213.0 495.0 285.0 18.5 33.5 10.2 271 114,455 12,958 20.54 6.91 4624.0 909.4

130 193.0 489.0 283.5 17.0 30.5 10.2 247 102,457 11,589 20.39 6.86 4190.9 817.7

119 177.0 481.8 286.1 16.6 26.9 10.2 226 91,077 10,529 20.07 6.82 3780.4 736.0

106 158.0 475.7 284.5 15.0 23.9 10.2 201 79,599 9,174 19.91 6.76 3346.3 645.0

97 144.0 472.2 283.1 13.6 22.1 10.2 184 72,692 8,365 19.87 6.74 3079.0 591.0

86 128.0 467.1 281.7 12.2 19.6 10.2 163 63,576 7,293 19.73 6.68 2722.1 517.8

76 113.0 462.5 280.3 10.8 17.3 10.2 144 55,467 6,344 19.63 6.64 2398.4 452.7

W18x7½

71 106.0 469.1 193.9 12.6 20.6 10.2 135 48,784 2,509 19.04 4.32 2079.7 258.7

65 97.0 466.1 192.8 11.4 19.1 10.2 123 44,588 2,281 19.02 4.30 1913.3 236.6

60 89.0 463.3 191.9 10.5 17.7 10.2 114 40,943 2,084 18.97 4.28 1767.5 217.2

55 82.0 460.0 191.3 9.9 16.0 10.2 105 37,052 1,870 18.83 4.23 1611.0 195.5

50 74.0 456.9 190.4 9.0 14.5 10.2 95 33,282 1,668 18.76 4.20 1456.7 175.2

W18x6

46 68.0 458.7 153.9 9.1 15.4 10.2 87 29,632 937 18.42 3.28 1291.9 121.8

40 60.0 454.7 152.8 8.0 13.3 10.2 76 25,475 795 18.32 3.24 1120.6 104.0

35 52.0 449.6 152.4 7.6 10.8 10.2 66 21,220 639 17.88 3.10 944.0 83.8

W16x7

57 85.0 417.3 180.8 10.9 18.2 10.2 108 31,534 1,795 17.07 4.07 1511.2 198.5

50 75.0 413.0 179.6 9.7 16.0 10.2 95 27,423 1,548 16.98 4.03 1328.0 172.4

45 67.0 409.7 178.7 8.8 14.4 10.2 86 24,405 1,367 16.89 4.00 1191.4 153.0

40 60.0 406.7 177.7 7.7 12.8 10.2 76 21,567 1,201 16.85 3.98 1060.7 135.2

36 53.0 402.8 177.4 7.5 10.9 10.2 68 18,657 1,018 16.54 3.86 926.2 114.8

24

형강 (W

ide Flange Beam

s)

H

25


형강 (W

ide Flange Beam

s)

H

공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


W10x5¾

30 44.8 265.9 147.6 7.6 13.0 7.6 57 7,070 695 11.14 3.49 531.7 94.2

26 38.5 262.4 146.6 6.6 11.2 7.6 49 6,002 587 11.06 3.46 457.5 80.1

22 32.7 258.3 146.1 6.1 9.1 7.6 42 4,920 475 10.84 3.37 380.9 65.1

W10x4

19 28.4 260.1 102.1 6.4 10.0 7.6 36 4,006 179 10.52 2.22 308.0 35.0

17 25.3 256.8 101.9 6.1 8.4 7.6 32 3,407 148 10.29 2.15 265.4 29.1

15 22.3 253.7 101.6 5.8 6.9 7.6 28 2,867 120 10.04 2.06 226.0 23.7

12 17.9 250.7 100.6 4.8 5.3 7.6 23 2,241 91 9.91 2.00 178.8 18.1

W8x8

67 100.0 228.6 210.3 14.5 23.7 10.2 127 11,313 3,687 9.44 5.39 989.8 350.7

58 86.0 222.3 208.8 13.0 20.6 10.2 110 9,477 3,125 9.27 5.32 852.8 299.3

48 71.0 215.9 206.0 10.2 17.4 10.2 91 7,652 2,537 9.17 5.28 708.8 246.3

40 59.0 209.6 205.0 9.1 14.2 10.2 76 6,094 2,043 8.97 5.19 581.6 199.4

HP36 53.0 203.7 207.1 11.3 11.3 10.2 68 4,968 1,677 8.54 4.96 487.7 161.9

35 52.0 206.2 203.7 7.9 12.6 10.2 66 5,270 1,772 8.91 5.17 511.0 174.0

31 46.1 203.2 203.1 7.2 11.0 10.2 59 4,575 1,543 8.81 5.12 450.3 152.0

W8x6½28 41.7 204.7 166.0 7.2 11.8 10.2 53 4,081 901 8.76 4.12 398.6 108.6

24 35.9 201.4 165.0 6.2 10.2 10.2 46 3,446 761 8.69 4.08 342.2 92.3

W8x5¼21 31.3 210.3 133.9 6.4 10.2 7.6 40 3,133 407 8.88 3.20 297.9 60.8

18 26.6 206.8 133.4 5.8 8.4 7.6 34 2,578 332 8.71 3.13 249.3 49.7

W8x4

15 22.5 206.0 102.0 6.2 8.0 7.6 29 1,999 142 8.35 2.23 194.1 27.8

13 19.3 202.9 101.6 5.8 6.5 7.6 25 1,648 114 8.16 2.14 162.4 22.4

10 15.0 200.4 100.1 4.3 5.2 7.6 19 1,283 87 8.19 2.14 128.0 17.4

W6x6

25 37.1 162.1 154.4 8.1 11.6 7.6 47 2,230 710 6.85 3.87 275.2 92.0

20 29.8 157.5 152.9 6.6 9.3 7.6 38 1,729 553 6.74 3.81 219.6 72.3

15 22.5 152.1 152.1 5.8 6.6 7.6 29 1,218 388 6.51 3.68 160.1 51.0

W6x4

16 24.0 159.5 102.4 6.6 10.3 7.6 31 1,345 184 6.61 2.45 168.6 36.0

12 18.0 153.2 101.6 5.8 7.1 7.6 23 925 125 6.33 2.32 120.7 24.5

9 13.5 149.9 100.1 4.3 5.5 7.6 17 689 91 6.29 2.29 92.0 18.3

W5x519 28.1 130.8 127.8 6.9 10.9 7.6 36 1,093 380 5.52 3.25 167.2 59.5

16 23.8 127.3 127.0 6.1 9.1 7.6 30 891 313 5.42 3.21 140.1 49.2

W4x4 13 19.3 105.7 103.1 7.1 8.8 7.6 25 475 161 4.37 2.54 89.9 31.1

공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


W12x12

79 117.0 314.5 306.8 11.9 18.7 15.2 150 27,571 8,994 13.57 7.75 1753.6 586.3

HP74 110.0 308.1 310.3 15.4 15.5 15.2 141 23,687 7,723 12.97 7.41 1537.6 497.9

72 107.0 311.2 305.8 10.9 17.0 15.2 136 24,837 8,117 13.50 7.72 1596.5 530.8

65 97.0 307.8 304.8 9.9 15.4 15.2 123 22,172 7,256 13.42 7.68 1440.5 476.1

HP63 93.0 303.3 308.0 13.1 13.1 15.2 119 19,657 6,376 12.86 7.33 1296.3 414.0

HP53 79.0 299.2 305.9 11.0 11.0 15.2 100 16,364 5,278 12.78 7.26 1093.8 345.1

W12x1058 86.0 309.6 254.3 9.1 16.3 15.2 110 19,789 4,456 13.41 6.37 1278.2 350.5

53 79.0 306.3 253.9 8.8 14.6 15.2 100 17,707 3,986 13.28 6.30 1156.1 314.0

W12x8

50 74.0 309.6 205.2 9.4 16.3 15.2 95 16,401 2,345 13.16 4.98 1059.4 228.6

45 67.0 306.3 204.3 8.5 14.6 15.2 85 14,581 2,080 13.08 4.94 952.0 203.6

40 60.0 303.3 203.3 7.5 13.1 15.2 76 12,899 1,835 13.03 4.92 850.6 180.5

W12x6½

35 52.0 317.5 166.6 7.6 13.2 7.6 67 11,864 1,020 13.34 3.91 747.3 122.4

30 44.5 313.4 165.6 6.6 11.2 7.6 57 9,919 847 13.22 3.86 632.9 102.3

26 38.7 310.4 164.8 5.8 9.7 7.6 49 8,501 721 13.13 3.82 547.8 87.5

W12x4

22 32.7 312.7 102.4 6.6 10.8 7.6 42 6,497 194 12.46 2.15 415.6 37.9

19 28.3 308.9 101.7 6.0 8.9 7.6 36 5,400 157 12.25 2.09 349.6 30.8

16 23.8 304.5 101.3 5.6 6.7 7.6 30 4,277 117 11.86 1.96 280.9 23.2

14 21.0 302.5 100.8 5.1 5.7 7.6 27 3,685 98 11.72 1.91 243.7 19.5

W10x10

112 167.0 288.5 264.5 19.2 31.8 12.7 213 29,823 9,812 11.85 6.79 2067.1 741.8

100 149.0 281.9 262.6 17.3 28.4 12.7 190 25,913 8,601 11.69 6.73 1838.2 655.0

88 131.0 275.3 260.7 15.4 25.1 12.7 167 22,215 7,437 11.53 6.67 1613.7 570.5

77 115.0 269.2 258.8 13.5 22.1 12.7 146 18,959 6,392 11.39 6.62 1408.4 493.9

68 101.0 264.2 257.3 11.9 19.6 12.7 129 16,387 5,557 11.28 6.57 1240.7 431.9

60 89.0 259.6 256.0 10.7 17.3 12.7 114 14,185 4,835 11.16 6.52 1092.9 377.7

HP57 85.0 253.7 259.7 14.4 14.4 12.7 108 12,223 4,197 10.63 6.23 963.4 323.2

54 80.0 256.3 254.8 9.4 15.6 12.7 102 12,601 4,307 11.11 6.49 983.3 338.1

49 73.0 253.5 254.0 8.6 14.2 12.7 93 11,341 3,887 11.04 6.46 894.8 306.0

HP42 62.0 246.4 255.9 10.5 10.7 12.7 80 8,757 2,983 10.48 6.12 710.9 233.1

W10x8

45 67.0 256.5 203.7 8.9 15.7 12.7 86 10,325 2,221 10.99 5.10 804.9 218.0

39 58.0 252.0 202.8 8.0 13.5 12.7 74 8,701 1,874 10.84 5.03 690.6 184.8

33 49.1 247.1 202.2 7.4 11.0 12.7 63 7,097 1,523 10.64 4.93 574.3 150.7

26

형강 (W

ide Flange Beam

s)

H

27


형강 (W

ide Flange Beam

s)

H

공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


IPB900

A 252.0 890.0 300.0 16.0 30.0 30 320 422,100 13,550 36.3 6.50 7,682 843

B 291.0 900.0 300.0 18.5 35.0 30 371 494,100 15,820 36.5 6.53 8,977 994

M 333.0 910.0 302.0 21.0 40.0 30 424 57,040 18,450 36.7 6.60 10,870 1230

HE900

AA 198.0 870.0 300.0 15.0 20.0 30 252 301,100 9,041 34.6 5.99 5,426 542

A 252.0 890.0 300.0 16.0 30.0 30 320 422,100 13,550 36.3 6.50 7,682 843

B 291.0 900.0 300.0 18.5 35.0 30 371 494,100 15,820 36.5 6.53 8,977 994

M 333.0 910.0 302.0 21.0 40.0 30 424 57,040 18,450 36.7 6.60 10,870 1230

IPB800

A 224.0 790.0 300.0 15.0 28.0 30 286 303,400 12,640 32.6 6.65 9,485 903

B 262.0 800.0 300.0 17.5 33.0 30 334 359,100 14,900 32.8 6.68 10,980 1054

M 317.0 814.0 303.0 21.0 40.0 30 404 442,600 18,630 33.1 6.79 12,540 1222

HE800

AA 172.0 770.0 300.0 14.0 18.0 30 218 208,900 8,134 30.9 6.10 6,923 603

A 224.0 790.0 300.0 15.0 28.0 30 286 303,400 12,640 32.6 6.65 9,485 903

B 262.0 800.0 300.0 17.5 33.0 30 334 359,100 14,900 32.8 6.68 10,980 1054

M 317.0 814.0 303.0 21.0 40.0 30 404 442,600 18,630 33.1 6.79 12,540 1222

HE700

AA 150.0 670.0 300.0 13.0 17.0 27.0 191 142,730 7,673 27.34 6.34 4260.6 511.5

A 204.0 690.0 300.0 14.5 27.0 27.0 260 215,311 12,179 28.75 6.84 6240.9 811.9

B 241.0 700.0 300.0 17.0 32.0 27.0 306 256,898 14,441 28.96 6.87 7339.9 962.7

M 301.0 716.0 304.0 21.0 40.0 27.0 383 329,288 18,798 29.32 7.01 9198.0 1236.7

HE650

AA 138.0 620.0 300.0 12.5 16.0 27.0 176 113,952 7,221 25.46 6.41 3675.9 481.4

A 190.0 640.0 300.0 13.5 26.0 27.0 242 175,186 11,724 26.93 6.97 5474.6 781.6

B 225.0 650.0 300.0 16.0 31.0 27.0 286 210,624 13,984 27.12 6.99 6480.7 932.3

M 293.0 668.0 305.0 21.0 40.0 27.0 374 281,676 18,979 27.45 7.13 8433.4 1244.5

IPE A 600 108.0 597.0 220.0 9.8 17.5 24.0 137 82,925 3,116 24.60 4.77 2778.1 283.3

IPE600 122.0 600.0 220.0 12.0 19.0 24.0 156 92,089 3,387 24.30 4.66 3069.6 307.9

IPE O 600 154.0 610.0 224.0 15.0 24.0 24.0 197 118,308 4,521 24.52 4.79 3879.0 403.6

HE600

AA 129.0 571.0 300.0 12.0 15.5 27.0 164 91,879 6,994 23.67 6.53 3218.2 466.2

A 178.0 590.0 300.0 13.0 25.0 27.0 226 141,215 11,271 24.97 7.05 4786.9 751.4

B 212.0 600.0 300.0 15.5 30.0 27.0 270 171,048 13,530 25.17 7.08 5701.6 902.0

M 285.0 620.0 305.0 21.0 40.0 27.0 364 237,454 18,976 25.55 7.22 7659.8 1244.3

(3) DIN

공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


IPE A 550 92.1 547.0 210.0 9.0 15.7 24.0 117 59,984 2,432 22.61 4.55 2193.2 231.7

IPE550 106.0 550.0 210.0 11.1 17.2 24.0 134 67,121 2,668 22.35 4.45 2440.8 254.1

IPE O 550 123.0 556.0 212.0 12.7 20.2 24.0 156 79,162 3,224 22.52 4.55 2847.6 304.2

HE550

AA 120.0 522.0 300.0 11.5 15.0 27.0 153 72,877 6,767 21.84 6.65 2792.2 451.1

A 166.0 540.0 300.0 12.5 24.0 27.0 212 111,938 10,819 22.99 7.15 4145.8 721.3

B 199.0 550.0 300.0 15.0 29.0 27.0 254 136,696 13,077 23.20 7.17 4970.8 871.8

M 278.0 572.0 306.0 21.0 40.0 27.0 354 197,989 19,159 23.64 7.35 6922.7 1252.2

IPE A 500 79.4 497.0 200.0 8.4 14.5 21.0 101 42,937 1,939 20.61 4.38 1727.8 193.9

IPE 500 90.7 500.0 200.0 10.2 16.0 21.0 116 48,202 2,142 20.43 4.31 1928.1 214.2

IPE O 500 107.0 506.0 202.0 12.0 19.0 21.0 137 57,780 2,622 20.56 4.38 2283.8 259.6

HE500

AA 107.0 472.0 300.0 10.5 14.0 27.0 137 54,648 6,314 19.98 6.79 2315.6 420.9

A 155.0 490.0 300.0 12.0 23.0 27.0 198 86,979 10,367 20.98 7.24 3550.2 691.1

B 187.0 500.0 300.0 14.5 28.0 27.0 239 107,180 12,624 21.19 7.27 4287.2 841.6

M 270.0 524.0 306.0 21.0 40.0 27.0 344 161,933 19,155 21.69 7.46 6180.7 1252.0

IPE A 450 67.2 447.0 190.0 7.6 13.1 21.0 86 29,761 1,502 18.65 4.19 1331.6 158.2

IPE450 77.6 450.0 190.0 9.4 14.6 21.0 99 33,745 1,676 18.48 4.12 1499.8 176.4

IPE O 450 92.4 456.0 192.0 11.0 17.6 21.0 118 40,926 2,085 18.65 4.21 1795.0 217.2

HE450

AA 99.7 425.0 300.0 10.0 13.5 27.0 127 41,891 6,088 18.16 6.92 1971.3 405.8

A 140.0 440.0 300.0 11.5 21.0 27.0 178 63,725 9,465 18.92 7.29 2896.6 631.0

B 171.0 450.0 300.0 14.0 26.0 27.0 218 79,891 11,721 19.14 7.33 3550.7 781.4

M 263.0 478.0 307.0 21.0 40.0 27.0 335 131,488 19,339 19.80 7.59 5501.6 1259.9

IPE A 400 57.4 397.0 180.0 7.0 12.0 21.0 73 20,294 1,171 16.66 4.00 1022.4 130.1

IPE 400 66.3 400.0 180.0 8.6 13.5 21.0 84 23,130 1,318 16.55 3.95 1156.5 146.4

IPE O 400 75.7 404.0 182.0 9.7 15.5 21.0 96 26,749 1,564 16.66 4.03 1324.2 171.9

HE400

AA 92.4 378.0 300.0 9.5 13.0 27.0 118 31,255 5,862 16.30 7.06 1653.7 390.8

A 125.0 390.0 300.0 11.0 19.0 27.0 159 45,072 8,564 16.84 7.34 2311.4 570.9

B 155.0 400.0 300.0 13.5 24.0 27.0 198 57,683 10,819 17.08 7.40 2884.2 721.3

M 256.0 432.0 307.0 21.0 40.0 27.0 326 104,122 19,336 17.88 7.70 4820.4 1259.7

IPE A 360 50.2 357.6 170.0 6.6 11.5 18.0 64 14,517 944 15.06 3.84 811.9 111.1

IPE 360 57.1 360.0 170.0 8.0 12.7 18.0 73 16,267 1,043 14.96 3.79 903.7 122.8

IPE O 360 66.0 364.0 172.0 9.2 14.7 18.0 84 19,049 1,251 15.05 3.86 1046.6 145.5

28

형강 (W

ide Flange Beam

s)

H

29


형강 (W

ide Flange Beam

s)

H

공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


HD360

134.0 356.0 369.0 11.2 18.0 15.0 171 41,509 15,078 15.60 9.40 2332.0 817.3

147.0 360.0 370.0 12.3 19.8 15.0 188 46,289 16,722 15.70 9.43 2571.6 903.9

162.0 364.0 371.0 13.3 21.8 15.0 206 51,540 18,562 15.81 9.49 2831.9 1000.6

179.0 368.0 373.0 15.0 23.9 15.0 228 57,441 20,683 15.86 9.52 3121.8 1109.0

196.0 372.0 374.0 16.4 26.2 15.0 250 63,633 22,858 15.94 9.56 3421.1 1222.4

HP360

84.3 340.0 367.0 10.0 10.0 15.2 107 23,207 8,243 14.70 8.76 1365.1 449.2

109.0 346.4 371.0 12.8 12.9 15.2 139 30,632 10,987 14.86 8.90 1768.6 592.3

133.0 352.0 373.8 15.6 15.7 15.2 169 37,984 13,680 14.98 8.99 2158.2 731.9

152.0 356.4 376.0 17.8 17.9 15.2 194 43,972 15,877 15.07 9.05 2467.6 844.5

174.0 361.4 378.5 20.3 20.4 15.2 221 51,010 18,463 15.18 9.13 2822.9 975.6

180.0 362.9 378.8 21.1 21.1 15.2 230 53,037 19,144 15.20 9.13 2922.9 1010.7

HE360

AA 83.7 339.0 300.0 9.0 12.0 27.0 107 23,039 5,411 14.70 7.12 1359.2 360.7

A 112.0 350.0 300.0 10.0 17.5 27.0 143 33,092 7,887 15.23 7.43 1891.0 525.8

B 142.0 360.0 300.0 12.5 22.5 27.0 181 43,195 10,141 15.46 7.49 2399.7 676.1

M 250.0 395.0 308.0 21.0 40.0 27.0 319 84,869 19,522 16.32 7.83 4297.2 1267.7

IPE A 330 43.0 327.0 160.0 6.5 10.0 18.0 55 10,232 685 13.67 3.54 625.8 85.6

IPE 330 49.1 330.0 160.0 7.5 11.5 18.0 63 11,768 788 13.71 3.55 713.2 98.5

IPE O 330 57.0 334.0 162.0 8.5 13.5 18.0 73 13,911 960 13.84 3.64 833.0 118.6

HE340

AA 78.9 320.0 300.0 8.5 11.5 27.0 101 19,554 5,185 13.95 7.18 1222.1 345.7

A 105.0 330.0 300.0 9.5 16.5 27.0 133 27,695 7,436 14.40 7.46 1678.5 495.7

B 134.0 340.0 300.0 12.0 21.5 27.0 171 36,658 9,690 14.65 7.53 2156.4 646.0

M 248.0 377.0 309.0 21.0 40.0 27.0 316 76,373 19,711 15.55 7.90 4051.6 1275.8

IPE A 300 36.5 297.0 150.0 6.1 9.2 15.0 47 7,174 519 12.42 3.34 483.1 69.2

IPE300 42.2 300.0 150.0 7.1 10.7 15.0 54 8,357 604 12.46 3.35 557.1 80.5

IPE O 300 49.3 304.0 152.0 8.0 12.7 15.0 63 9,995 746 12.61 3.45 657.5 98.1

HE320

AA 74.2 301.0 300.0 8.0 11.0 27.0 95 16,449 4,959 13.19 7.24 1092.9 330.6

A 97.6 310.0 300.0 9.0 15.5 27.0 124 22,930 6,985 13.58 7.49 1479.4 465.7

B 127.0 320.0 300.0 11.5 20.5 27.0 161 30,825 9,239 13.82 7.57 1926.6 615.9

M 245.0 359.0 309.0 21.0 40.0 27.0 312 68,136 19,710 14.78 7.95 3795.9 1275.7

공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


HD320

97.6 310.0 300.0 9.0 15.5 27.0 124 22,930 6,985 13.58 7.49 1479.4 465.7

127.0 320.0 300.0 11.5 20.5 27.0 161 30,825 9,239 13.82 7.57 1926.6 615.9

158.0 330.0 303.0 14.5 25.5 27.0 201 39,646 11,843 14.04 7.67 2402.8 781.7

198.0 343.0 306.0 18.0 32.0 27.0 252 51,897 15,311 14.34 7.79 3026.1 1000.7

245.0 359.0 309.0 21.0 40.0 27.0 312 68,136 19,710 14.78 7.95 3795.9 1275.7

300.0 375.0 313.0 27.0 48.0 27.0 382 86,906 24,603 15.08 8.02 4635.0 1572.1

HP320

88.5 303.0 304.0 12.0 12.0 27.0 113 18,744 5,634 12.90 7.07 1237.2 370.6

103.0 307.0 306.0 14.0 14.0 27.0 131 22,054 6,704 12.98 7.15 1436.8 438.2

117.0 311.0 308.0 16.0 16.0 27.0 149 25,477 7,815 13.06 7.23 1638.4 507.5

147.0 319.0 312.0 20.0 20.0 27.0 187 32,672 10,160 13.22 7.37 2048.4 651.3

184.0 329.0 317.0 25.0 25.0 27.0 235 42,345 13,333 13.44 7.54 2574.1 841.2

HE300

AA 69.8 283.0 300.0 7.5 10.5 27.0 89 13,805 4,734 12.46 7.30 975.6 315.6

A 88.3 290.0 300.0 8.5 14.0 27.0 113 18,265 6,310 12.74 7.49 1259.6 420.6

B 117.0 300.0 300.0 11.0 19.0 27.0 149 25,167 8,563 12.99 7.58 1677.8 570.9

M 238.0 340.0 310.0 21.0 39.0 27.0 303 59,202 19,403 13.98 8.00 3482.5 1251.8

HP305

78.4 299.3 306.4 11.0 11.0 15.2 100 16,332 5,278 12.79 7.27 1091.3 344.5

88.0 301.7 307.8 12.4 12.3 15.2 112 18,425 5,984 12.82 7.31 1221.4 388.9

94.9 303.7 308.7 13.3 13.3 15.2 121 20,045 6,529 12.87 7.35 1320.1 423.0

110.0 307.9 310.7 15.3 15.4 15.2 140 23,563 7,709 12.97 7.42 1530.6 496.2

126.0 312.3 312.9 17.5 17.6 15.2 161 27,408 9,002 13.06 7.49 1755.2 575.4

149.0 318.5 316.0 20.6 20.7 15.2 190 33,068 10,910 13.20 7.58 2076.5 690.5

180.0 326.7 319.7 24.8 24.8 15.2 229 40,973 13,546 13.37 7.69 2508.3 847.4

186.0 328.3 320.9 25.5 25.6 15.2 237 42,610 14,143 13.41 7.73 2595.8 881.5

223.0 337.9 325.7 30.3 30.4 15.2 284 52,699 17,577 13.62 7.87 3119.2 1079.3

IPE A 270 30.7 267.0 135.0 5.5 8.7 15.0 39 4,918 358 11.21 3.02 368.4 53.0

IPE 270 36.1 270.0 135.0 6.6 10.2 15.0 46 5,790 420 11.23 3.02 428.9 62.2

IPE O 270 42.3 274.0 136.0 7.5 12.2 15.0 54 6,947 513 11.36 3.09 507.1 75.5

HE280

AA 61.2 264.0 280.0 7.0 10.0 24.0 78 10,559 3,664 11.63 6.85 799.9 261.7

A 76.4 270.0 280.0 8.0 13.0 24.0 97 13,674 4,763 11.86 7.00 1012.9 340.2

B 103.0 280.0 280.0 10.5 18.0 24.0 131 19,271 6,595 12.11 7.09 1376.5 471.0

M 189.0 310.0 288.0 18.5 33.0 24.0 240 39,548 13,163 12.83 7.40 2551.5 914.1

30

형강 (W

ide Flange Beam

s)

H

31


형강 (W

ide Flange Beam

s)

H

공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


HE260

AA 54.1 244.0 260.0 6.5 9.5 24.0 69 7,981 2,788 10.76 6.36 654.2 214.5

A 68.2 250.0 260.0 7.5 12.5 24.0 87 10,456 3,668 10.97 6.50 836.5 282.1

B 93.0 260.0 260.0 10.0 17.5 24.0 118 14,920 5,135 11.22 6.58 1147.7 395.0

M 172.0 290.0 268.0 18.0 32.5 24.0 220 31,308 10,449 11.94 6.90 2159.1 779.8

HD260

68.2 250.0 260.0 7.5 12.5 24.0 87 10,456 3,668 10.97 6.50 836.5 282.1

93.0 260.0 260.0 10.0 17.5 24.0 118 14,920 5,135 11.22 6.58 1147.7 395.0

114.0 268.0 262.0 12.5 21.5 24.0 146 18,913 6,456 11.39 6.66 1411.4 492.8

142.0 278.0 265.0 15.5 26.5 24.0 180 24,332 8,236 11.62 6.76 1750.5 621.6

172.0 290.0 268.0 18.0 32.5 24.0 220 31,308 10,449 11.94 6.90 2159.1 779.8

HP26075.0 249.0 265.0 12.0 12.0 24.0 96 10,647 3,733 10.56 6.25 855.2 281.7

87.3 253.0 267.0 14.0 14.0 24.0 111 12,586 4,455 10.64 6.33 995.0 333.7

IPE A 240 26.2 237.0 120.0 5.2 8.3 15.0 33 3,291 240 9.94 2.68 277.7 40.0

IPE 240 30.7 240.0 120.0 6.2 9.8 15.0 39 3,892 284 9.97 2.69 324.3 47.3

IPE O 240 34.3 242.0 122.0 7.0 10.8 15.0 44 4,370 329 10.00 2.74 361.1 53.9

HE240

AA 47.4 224.0 240.0 6.5 9.0 21.0 60 5,836 2,077 9.83 5.87 521.0 173.1

A 60.3 230.0 240.0 7.5 12.0 21.0 77 7,764 2,769 10.05 6.00 675.1 230.7

B 83.2 240.0 240.0 10.0 17.0 21.0 106 11,260 3,923 10.31 6.08 938.3 326.9

M 157.0 270.0 248.0 18.0 32.0 21.0 200 24,290 8,153 11.03 6.39 1799.3 657.5

IPE A 220 22.2 217.0 110.0 5.0 7.7 12.0 28 2,317 171 9.05 2.46 213.5 31.2

IPE 220 26.2 220.0 110.0 5.9 9.2 12.0 33 2,772 205 9.11 2.48 252.0 37.3

IPE O 220 29.4 222.0 112.0 6.6 10.2 12.0 37 3,134 240 9.16 2.53 282.4 42.8

HE220

A 50.5 210.0 220.0 7.0 11.0 18.0 64 5,410 1,955 9.17 5.51 515.2 177.7

B 71.5 220.0 220.0 9.5 16.0 18.0 91 8,091 2,843 9.43 5.59 735.6 258.5

M 117.0 240.0 226.0 15.5 26.0 18.0 149 14,605 5,012 9.89 5.79 1217.1 443.5

HP220 57.2 210.0 224.5 11.0 11.0 18.0 73 5,730 2,079 8.87 5.34 545.7 185.2

IPE A 200 18.4 197.0 100.0 4.5 7.0 12.0 23 1,592 117 8.23 2.23 161.6 23.4

IPE 200 22.4 200.0 100.0 5.6 8.5 12.0 28 1,943 142 8.26 2.24 194.3 28.5

IPE O 200 25.1 202.0 102.0 6.2 9.5 12.0 32 2,211 169 8.32 2.30 218.9 33.1

공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


HE200

A 42.3 190.0 200.0 6.5 10.0 18.0 54 3,692 1,336 8.28 4.98 388.7 133.6

B 61.3 200.0 200.0 9.0 15.0 18.0 78 5,696 2,003 8.54 5.07 569.6 200.3

M 103.0 220.0 206.0 15.0 25.0 18.0 131 10,642 3,651 9.00 5.27 967.5 354.5

HP200 53.5 204.0 207.0 11.3 11.3 10.0 68 4,977 1,673 8.55 4.96 488.0 161.7

HE160

A 30.4 152.0 160.0 6.0 9.0 15.0 39 1,673 616 6.57 3.98 220.1 76.9

B 42.6 160.0 160.0 8.0 13.0 15.0 54 2,492 889 6.78 4.05 311.5 111.2

M 76.2 180.0 166.0 14.0 23.0 15.0 97 5,098 1,759 7.25 4.26 566.5 211.9

HE140

A 24.7 133.0 140.0 5.5 8.5 12.0 31 1,033 389 5.73 3.52 155.4 55.6

B 33.7 140.0 140.0 7.0 12.0 12.0 43 1,509 550 5.93 3.58 215.6 78.5

M 63.2 160.0 146.0 13.0 22.0 12.0 81 3,291 1,144 6.39 3.77 411.4 156.8

HE120

A 19.9 114.0 120.0 5.0 8.0 12.0 25 606 231 4.89 3.02 106.3 38.5

B 26.7 120.0 120.0 6.5 11.0 12.0 34 864 318 5.04 3.06 144.1 52.9

M 52.1 140.0 126.0 12.5 21.0 12.0 66 2,018 703 5.51 3.25 288.2 111.6

HE100

A 16.7 96.0 100.0 5.0 8.0 12.0 21 349 134 4.06 2.51 72.8 26.8

B 20.4 100.0 100.0 6.0 10.0 12.0 26 450 167 4.16 2.53 89.9 33.5

M 41.8 120.0 106.0 12.0 20.0 12.0 53 1,143 399 4.63 2.74 190.4 75.3

32

형강 (W

ide Flange Beam

s)

H

33


형강 (W

ide Flange Beam

s)

H

공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


914X305

289 289.1 926.6 307.7 19.5 32.0 19.1 368 325,254 9,413 37.00 6.51 10,580 1,014.0

253 253.4 918.4 305.5 17.3 27.9 19.1 323 376,414 11,236 37.76 6.42 9,501 870.8

224 224.2 910.4 304.1 15.9 23.9 19.1 286 436,305 13,301 36.30 6.27 8,269 739.0

201 200.9 903.0 303.3 15.1 20.2 19.1 256 504,187 15,597 35.65 6.07 7,204 621.4

838X292

226 226.5 850.9 293.8 16.1 26.8 17.8 289 339,704 7,799 34.31 6.27 7,985 773.3

194 193.8 840.7 292.4 14.0 21.7 17.8 247 279,175 9,066 33.63 6.06 6,641 620.1

176 175.9 834.9 291.7 14.0 18.8 17.8 224 246,021 113,600 33.14 5.90 5,893 534.7

762X267

197 196.8 769.8 268.0 15.6 25.4 16.5 251 239,957 8,175 30.94 5.71 6,234 610.1

173 173.0 762.2 266.7 14.3 21.6 16.5 220 205,282 6,850 30.52 5.58 5,387 513.7

147 146.9 754.0 265.2 12.8 17.5 16.5 187 168,502 5,455 30.00 5.40 4,470 414.4

134 133.9 750.0 264.4 12.0 15.5 16.5 171 150,692 4,788 29.72 5.30 4,018 362.0

686x254

170 170.2 692.9 255.8 14.5 23.7 15.2 217 170,139 6,621 28.03 5.53 4910.8 517.7

152 152.4 687.5 254.5 13.2 21.0 15.2 194 150,272 5,782 27.84 5.46 4371.5 454.5

140 140.1 683.5 253.7 12.4 19.0 15.2 179 136,268 5,179 27.62 5.38 3987.3 408.2

125 125.2 677.9 253.0 11.7 16.2 15.2 160 117,995 4,379 27.19 5.24 3481.1 346.1

610x305

238 238.1 635.8 311.4 18.4 31.4 16.5 303 209,326 15,821 26.28 7.22 6584.6 1016.1

179 179.0 620.2 307.1 14.1 23.6 16.5 228 153,168 11,419 25.90 7.07 4939.3 743.7

149 149.1 612.4 304.8 11.8 19.7 16.5 190 125,807 9,301 25.74 7.00 4108.7 610.3

610x229

140 139.9 617.2 230.2 13.1 22.1 12.7 178 111,963 4,515 25.05 5.03 3628.1 392.3

125 125.1 612.2 229.0 11.9 19.6 12.7 160 98,696 3,933 24.87 4.96 3224.3 343.5

113 113.0 607.6 228.2 11.1 17.3 12.7 144 87,407 3,439 24.63 4.89 2877.1 301.4

101 101.2 602.6 227.6 10.5 14.8 12.7 129 75,723 2,912 24.24 4.75 2513.2 255.9

533x210

122 122.0 544.5 211.9 12.7 21.3 12.7 156 76,130 3,393 22.12 4.67 2796.3 320.2

109 109.0 539.5 210.8 11.6 18.8 12.7 139 66,767 2,942 21.95 4.61 2475.2 279.1

101 101.0 536.7 210.0 10.8 17.4 12.7 129 61,518 2,692 21.87 4.57 2292.5 256.4

92 92.1 533.1 209.3 10.1 15.6 12.7 117 55,291 2,392 21.70 4.51 2074.2 228.6

82 82.2 528.3 208.8 9.6 13.2 12.7 104 47,512 2,008 21.33 4.38 1798.6 192.4

457x191

98 98.3 467.2 192.8 11.4 19.6 10.2 125 45,685 2,343 19.10 4.33 1955.7 243.0

89 89.3 463.4 191.9 10.5 17.7 10.2 114 40,938 2,084 18.98 4.28 1766.8 217.2

82 82.0 460.0 191.3 9.9 16.0 10.2 105 37,061 1,871 18.83 4.23 1611.4 195.6

74 74.3 457.0 190.4 9.0 14.5 10.2 95 33,284 1,669 18.76 4.20 1456.6 175.3

67 67.1 453.4 189.9 8.5 12.7 10.2 85 29,369 1,452 18.54 4.12 1295.5 152.9

공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


457x152

82 82.1 465.8 155.3 10.5 18.9 10.2 105 36,586 1,184 18.71 3.37 1570.9 152.5

74 74.2 462.0 154.4 9.6 17.0 10.2 94 32,665 1,046 18.60 3.33 1414.1 135.5

67 67.2 458.0 153.8 9.0 15.0 10.2 85 28,875 910 18.38 3.26 1260.9 118.4

60 59.8 454.6 152.9 8.1 13.3 10.2 76 25,508 795 18.29 3.23 1122.2 104.0

52 52.3 449.8 152.4 7.6 10.9 10.2 67 21,349 645 17.92 3.11 949.2 84.6

406x178

74 74.2 412.8 179.5 9.5 16.0 10.2 94 27,243 1,541 16.99 4.04 1320.1 171.7

67 67.1 409.4 178.8 8.8 14.3 10.2 86 24,338 1,365 16.87 3.99 1188.8 152.7

60 60.1 406.4 177.9 7.9 12.8 10.2 76 21,568 1,201 16.80 3.96 1061.4 135.0

54 54.1 402.6 177.7 7.7 10.9 10.2 69 18,686 1,019 16.47 3.85 928.3 114.6

406x14046 46.0 403.2 142.2 6.8 11.2 10.2 59 15,662 537 16.35 3.03 776.9 75.5

39 39.0 398.0 141.8 6.4 8.6 10.2 50 12,543 411 15.88 2.88 630.3 58.0

356X406287 287.0 393.6 399.0 22.6 36.5 15.2 366 79,085 30,993 16.3 10.2 5,075 1,939

235 235.0 381.0 394.8 18.4 30.2 15.2 299 99,875 38,677 16.1 10.2 4,151 1,570

356x171

67 67.1 363.4 173.2 9.1 15.7 10.2 85 19,454 1,362 15.09 3.99 1070.6 157.3

57 57.0 358.0 172.2 8.1 13.0 10.2 73 16,066 1,111 14.87 3.91 897.5 129.0

51 51.0 355.0 171.5 7.4 11.5 10.2 65 14,139 968 14.76 3.86 796.5 112.9

45 45.0 351.4 171.1 7.0 9.7 10.2 57 12,092 813 14.51 3.76 688.2 95.1

356x12739 39.1 353.4 126.0 6.6 10.7 10.2 50 10,150 357 14.29 2.68 574.4 56.6

33 33.1 349.0 125.4 6.0 8.5 10.2 42 8,254 280 13.99 2.58 473.0 44.7

356x368

C202 201.9 374.6 374.7 16.5 27.0 15.2 257 66,263 23,689 16.05 9.60 3537.8 1264.4

C177 177.0 368.2 372.6 14.4 23.8 15.2 226 57,119 20,529 15.92 9.54 3102.6 1101.9

B174 173.9 361.4 378.5 20.3 20.4 15.2 222 51,096 18,505 15.18 9.13 2827.7 977.8

C153 152.9 362.0 370.5 12.3 20.7 15.2 194 48,484 17,511 15.79 9.49 2679.0 945.3

B152 152.0 356.4 376.0 17.8 17.9 15.2 194 43,942 15,861 15.07 9.05 2465.8 843.6

B133 133.0 352.0 373.8 15.6 15.7 15.2 170 37,996 13,680 14.97 8.98 2158.9 731.9

C129 129.0 355.6 368.6 10.4 17.5 15.2 164 40,201 14,591 15.65 9.43 2261.0 791.7

B109 108.9 346.4 371.0 12.8 12.9 15.2 138 30,536 10,946 14.85 8.89 1763.3 590.1

305x102

33 32.8 312.7 102.4 6.6 10.8 7.6 42 6,487 193 12.46 2.15 414.9 37.8

28 28.2 308.7 101.8 6.0 8.8 7.6 36 5,366 155 12.23 2.08 347.6 30.5

25 24.8 305.1 101.6 5.8 7.0 7.6 32 4,464 123 11.86 1.97 292.6 24.2

(4) British Standard (BS)

34

형강 (W

ide Flange Beam

s)

H

35


형강 (W

ide Flange Beam

s)

H

(B-t1)2공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


305x165

54 54.0 310.4 166.9 7.9 13.7 8.9 69 11,706 1,064 13.04 3.93 754.3 127.5

46 46.1 306.6 165.7 6.7 11.8 8.9 59 9,914 897 12.98 3.90 646.7 108.3

40 40.3 303.4 165.0 6.0 10.2 8.9 51 8,477 761 12.87 3.86 558.8 92.3

305x305

C283 282.9 365.3 322.2 26.8 44.1 15.2 360 78,872 24,635 14.79 8.27 4318.2 1529.2

C240 240.0 352.5 318.4 23.0 37.7 15.2 306 64,203 20,315 14.49 8.15 3642.7 1276.0

C198 198.1 339.9 314.5 19.1 31.4 15.2 252 50,905 16,299 14.20 8.04 2995.3 1036.5

B223 222.9 337.9 325.7 30.3 30.4 15.2 284 52,699 17,577 13.62 7.87 3119.2 1079.3

B186 186.0 328.3 320.9 25.5 25.6 15.2 237 42,610 14,143 13.41 7.73 2595.8 881.5

C158 158.1 327.1 311.2 15.8 25.0 15.2 202 38,797 12,592 13.87 7.90 2372.2 809.2

B149 149.1 318.5 315.6 20.7 20.7 15.2 190 33,041 10,869 13.19 7.56 2075.0 688.8

C137 136.9 320.5 309.2 13.8 21.7 15.2 175 32,881 10,721 13.72 7.83 2051.6 693.4

B126 126.1 312.4 312.5 17.7 17.7 15.2 161 27,482 8,999 13.06 7.47 1759.6 575.8

C118 117.9 314.5 307.4 12.0 18.7 15.2 150 27,657 9,056 13.57 7.77 1759.1 589.2

B110 110.0 307.9 310.3 15.4 15.4 15.2 140 23,578 7,689 12.96 7.40 1531.6 495.6

C97 96.9 307.9 305.3 9.9 15.4 15.2 123 22,242 7,304 13.42 7.69 1444.8 478.5

B95 94.9 303.8 308.3 13.4 13.4 15.2 121 20,112 6,530 12.87 7.34 1324.1 423.7

B88 88.0 301.7 307.2 12.3 12.3 15.2 112 18,402 5,959 12.83 7.30 1219.9 388.0

B79 78.9 299.2 306.0 11.1 11.1 15.2 100 16,398 5,292 12.78 7.26 1096.1 345.9

254x102

28 28.3 260.4 102.2 6.3 10.0 7.6 36 4,005 179 10.54 2.22 307.6 34.9

25 25.2 257.2 101.9 6.0 8.4 7.6 32 3,415 149 10.32 2.15 265.5 29.2

22 22.0 254.0 101.6 5.7 6.8 7.6 28 2,841 119 10.07 2.06 223.7 23.5

254x146

43 43.0 259.6 147.3 7.2 12.7 7.6 55 6,543 677 10.93 3.52 504.1 92.0

37 37.0 256.0 146.4 6.3 10.9 7.6 47 5,545 571 10.84 3.48 433.2 78.1

31 31.1 251.4 146.1 6.0 8.6 7.6 40 4,414 448 10.55 3.36 351.1 61.3

254x254

C167 167.1 289.1 265.2 19.2 31.7 12.7 213 29,998 9,870 11.87 6.81 2075.3 744.3

C132 132.0 276.3 261.3 15.3 25.3 12.7 168 22,560 7,546 11.58 6.69 1633.0 577.6

C107 107.1 266.7 258.8 12.8 20.5 12.7 136 17,525 5,934 11.33 6.59 1314.2 458.6

C89 88.9 260.3 256.3 10.3 17.3 12.7 114 14,298 4,871 11.22 6.55 1098.6 380.1

B85 85.1 254.3 260.4 14.4 14.3 12.7 108 12,301 4,223 10.65 6.24 967.4 324.3

C73 73.1 254.1 254.6 8.6 14.2 12.7 93 11,394 3,900 11.07 6.47 896.8 306.4

B71 71.0 249.7 258.0 12.0 12.0 12.7 90 10,071 3,439 10.56 6.17 806.7 266.6

B63 63.0 247.1 256.6 10.6 10.7 12.7 80 8,861 3,016 10.51 6.13 717.2 235.1

공칭규격 단중


(mm)단면적



(cm)단면계수

(cm3)


203x13330 30.0 206.8 133.9 6.4 9.6 7.6 38 2,895 385 8.70 3.17 280.0 57.5

25 25.1 203.2 133.2 5.7 7.8 7.6 32 2,345 309 8.56 3.10 230.8 46.3

203x102 23 23.1 203.2 101.8 5.4 9.3 7.6 29 2,105 164 8.46 2.36 207.2 32.2

203x203

C86 86.1 222.2 209.1 12.7 20.5 10.2 110 9,456 3,131 9.28 5.34 851.2 299.5

C71 71.0 215.8 206.4 10.0 17.3 10.2 90 7,618 2,537 9.18 5.30 706.0 245.9

C60 60.0 209.6 205.8 9.4 14.2 10.2 76 6,113 2,061 8.95 5.20 583.4 200.3

B54 53.9 204.0 207.7 11.3 11.4 10.2 69 5,027 1,705 8.55 4.98 492.8 164.2

C52 52.0 206.2 204.3 7.9 12.5 10.2 66 5,269 1,781 8.91 5.18 510.9 174.3

C46 46.1 203.2 203.6 7.2 11.0 10.2 59 4,567 1,548 8.82 5.13 449.5 152.1

152x152

C37 37.0 161.8 154.4 8.0 11.5 7.6 47 2,215 709 6.85 3.87 273.8 91.8

C30 30.0 157.6 152.9 6.5 9.4 7.6 38 1,744 558 6.76 3.82 221.3 73.1

C23 23.0 152.4 152.2 5.8 6.8 7.6 29 1,254 402 6.54 3.70 164.6 52.8

36

형강 (W

ide Flange Beam

s)

H

37


형강 (W

ide Flange Beam

s)

H

Atea of Section

Monent of Inertla Radius of Gyration Modulus of Section

DesignationSection ly ix iy Sx Sy

cm2 cm4 cm4 cm cm cm3 cm3

17.8 666.2 49.5 6.1 1.7 88.8 13.2150UB

23 905.2 67.2 6.3 1.7 116.8 17.9

23.2 1581.7 113.6 8.3 2.2 159.8 23

200UB28.7 2096.1 274.8 8.5 3.1 207.9 41.3

32.3 2358 306.3 8.5 3.1 232.1 46.1

38.2 2913.6 385.6 8.7 3.2 281.5 57.5

32.7 3537.4 254.9 10.4 2.8 285.3 41.1

250UB40.1 4453.7 446.7 10.5 3.3 354 61.2

47.5 5568.3 566.1 10.8 3.5 434.7 77.5

40.8 6318.7 442 12.4 3.3 424.1 59.3

310UB52.1 8642.8 764.6 12.9 3.8 568.6 92.7

59.3 10041.2 900.8 13 3.9 653.7 108.5

57.2 12135.3 809.7 14.6 3.8 689.5 94.7

360UB64.7 14184.4 959.9 14.8 3.9 797.8 112.3

72.4 16112.2 1104.5 14.9 3.9 898.6 128.4

68.9 18779.6 1026.5 16.5 3.9 932.9 115.3410UB

76.4 21638.5 1205.2 16.8 4 1064.9 135.4

85.8 29551 1454.6 18.6 4.1 1302.4 153.1

460UB95.2 33.493.6 1660.9 18.8 4.2 1464.5 174.8

104.6 37176.7 1862.2 18.8 4.2 1615 195

105 47736.3 2013.3 21.3 4.4 1807.5 192.7530UB

118.1 55429 2379.3 21.7 4.5 2079.9 227.7

126.4 73254.9 2772.6 24.1 4.7 2433.7 243.2

610UB144.7 87456.7 3425.5 24.6 4.9 2881.6 300.5

159.6 98628.4 3932.5 24.9 5 3225.3 343.4

120.7 118000 4380 27.2 5.24 3480 346690UB

120.7 136000 5180 27.6 5.39 3990 409

188 169000 5460 30 5.4 4470 411

760UB

220 205000 6850 30.5 5.58 5390 514

251 240000 8180 30.9 5.71 6230 610

280 270000 9310 31 5.76 8040 690

311 302000 10500 31.2 5.81 8940 773

DesignationUnit

WeightDepth ofSecton

Width ofSecton Thickness Root

Radius

kg/m mm mm t1 t2 r

150UB14 150 75 5 7 8

18.0 155.0 75.0 6.0 9.5 8

200UB

18.2 198.0 99.0 4.5 7.0 11

22.3 201.6 133.0 5.0 7.0 8.9

25.4 203.2 133.0 5.8 7.8 8.9

29.8 207.0 134.0 6.3 9.6 8.9

250UB

25.7 248.0 124.0 5.0 8.0 12

31.4 251.5 146.0 6.1 8.6 8.9

37.3 256.2 146.0 6.4 10.9 8.9

310UB

32.0 298.0 149 5.5 8 13

40.4 304.0 165 6.1 10.2 11.4

46.2 307.2 166 6.7 11.8 11.4

360UB

44.7 352.0 171.0 6.9 9.7 11.4

50.7 355.6 171.0 7.3 11.5 11.4

56.7 358.6 172.0 8.0 13.0 11.4

410UB53.7 402.6 178.0 7.6 10.9 11.4

59.7 406.4 178.0 7.8 12.8 11.4

460UB

67.1 453.8 190.0 8.5 12.7 11.4

74.6 457.4 190.0 9.1 14.5 11.4

82.1 460.4 191.0 9.9 16.0 11.4

530UB82.0 528.2 209.0 9.6 13.2 14

92.4 533.0 209.0 10.2 15.6 14

610UB

101 602 228 10.6 14.8 14

113 607 228 11.2 17.3 14

125 611.6 229 11.9 19.6 14

690UB•125 677.9 253 11.7 16.2 645.5

•140 683.5 253.7 12.4 19 645.5

760UB

148 754 265.2 12.8 17.5 16.5

173 762.2 266.7 14.3 21.6 16.5

197 769.8 268 15.6 25.4 16.5

220 775.5 269.8 17.4 28.3 16.5

244 781.3 271.6 19.3 31.3 16.5

(5) Australian/New Zealand Universal Beams & Columns (AS/NZS)

•: 미생산(생산가능)

38

형강 (W

ide Flange Beam

s)

H

39


형강 (W

ide Flange Beam

s)

H

DesignationUnit

WeightDepth ofSecton

Width ofSecton Thickness Root

Radius

kg/m mm mm t1 t2 r

100UC 14.8 97.0 99.0 5.0 9.0 10.0

150UC

23.4 152.4 152 6.1 6.8 8.9

30 157.6 153 6.6 9.4 8.9

37.2 161.8 154 8.1 11.5 8.9

200UC

46.2 203.2 203.0 7.3 11.0 8.9

52.2 206.4 204.0 8.0 12.5 8.9

59.5 209.8 205.0 9.3 14.2 8.9

250UC72.9 253.8 254.0 8.6 14.2 14

89.5 260.0 256.0 10.5 17.3 14

310UC

96.8 308.0 305.0 9.9 15.4 16.5

118.0 314.6 307.0 11.9 18.7 16.5

137.0 320.6 309.0 13.8 21.7 16.5

158.0 327.2 311.0 15.7 25.0 16.5

Atea of Section

Monent of Inertla Radius of Gyration Modulus of Section

DesignationSection ly ix iy Sx Sy

cm2 cm4 cm4 cm cm cm3 cm3

18.9 318.3 113.5 4.1 2.5 65.6 22.9 100UC

29.8 1263.3 398.5 6.5 3.7 165.8 52.4

150UC38.6 1759.5 561.7 6.8 3.8 223.3 73.4

47.3 2215.7 700.9 6.8 3.8 273.9 91

58.6 4554.3 1534.5 8.8 5.1 447.8 151.2

200UC66.2 5251.8 1769.7 8.9 5.2 508.9 173.5

75.8 60194.7 2040.5 9 5.2 581 199.1

93.2 11388.2 3880.5 11.1 6.5 897.4 305.6250UC

113.9 14270.1 4840.9 11.2 6.5 1097.7 378.2

123.7 22308.7 7286.5 13.4 7.7 1448.6 477.8

310UC150.1 27704.7 9024.2 13.6 7.8 1761.3 587.9

174.7 32881.3 10679.4 13.7 7.8 2051.2 691.2

201.4 38796.5 12545.7 13.9 7.9 2371.4 806.8

40

형강 (W

ide Flange Beam

s)

H

41


형강 (W

ide Flange Beam

s)

H

•68.2 250 260 7.5 12.5 836.5 282.1

•93.0 260 260 10 17.5 1147.7 395.0

•114 268 262 12.5 21.5 1411.4 492.8

•142 278 265 15.5 26.5 1750.5 621.6

•172 290 268 18 32.5 2159.1 779.8

•97.6 310 300 9 15.5 1479.4 465.7

•127 320 300 11.5 20.5 1926.6 615.9

•158 330 303 14.5 25.5 2402.8 781.7

•198 343 306 18 32 3026.1 1000.7

•245 359 309 21 40 3795.9 1275.7

•300 375 313 27 48 4635.0 1572.1

•134 356 369 11.2 18 2332.0 817.3

•147 360 370 12.3 19.8 2571.6 903.9

•162 364 371 13.3 21.8 2831.9 1000.6

•179 368 373 15 23.9 3121.8 1109.0

•196 372 374 16.4 26.2 3421.1 1222.4

공칭치수

NominalSize(inch)


Standard SectionalDimension(mm)

(kg/m) H B t1 t2

단중

HD260

HD320

HD360

53.5 204 207 11.3 11.3 488.0 161.7

57.2 210 224.5 11 11 545.7 185.2

•75.0 249 265 12 12 855.2 281.7

•87.3 253 267 14 14 995.0 333.7

•78.4 299.3 306.4 11 11 1091.3 344.5

•88.0 301.7 307.8 12.4 12.3 1221.4 388.9

•94.9 303.7 308.7 13.3 13.3 1320.1 423.0

•110 307.9 310.7 15.3 15.4 1530.6 496.2

•126 312.3 312.9 17.5 17.6 1755.2 575.4

•149 318.5 316 20.6 20.7 2076.5 690.5

•180 326.7 319.7 24.8 24.8 2508.3 847.4

•186 328.3 320.9 25.5 25.6 2595.8 881.5

•223 337.9 325.7 30.3 30.4 3119.2 1079.3

•88.5 303 304 12 12 1237.2 370.6

•103 307 306 14 14 1436.8 438.02

•117 311 308 16 16 1638.4 507.5

•147 319 312 20 20 2048.4 651.3

•184 329 317 25 25 2574.1 841.2

•84.3 340 367 10 10 1365.1 449.2

•109 346.4 371 12.8 12.9 1768.6 592.3

•133 352 373.8 15.6 15.7 2158.2 731.9

•152 356.4 376 17.8 17.9 2467.6 844.5

•174 361.4 378.5 20.3 20.4 2822.9 975.6

•180 362.9 378.8 21.1 21.1 2922.9 1010.7

공칭치수

NominalSize(inch)



(kg/m) H B t1 t2

단중단면계수

(cm3)단면계수

(cm3)

Zx ZxZy Zy

HP200

HP220

HP260

HP305

HP320

HP360



42

형강

말뚝 (H

-Bearing P

iles)

H

43


비대칭

형강

(Asym

metric H

- Beam

s)

H

4. Checkered H-Beams 무늬 H형강(복공용)


190 x 197 190x197 5 7 13 39.94 32.6 312 99.2

공칭치수

NominalSize(mm)



H x B t1 t2 r A W Sx Sy

단면적

SectionalArea(cm2)

단위무게

Unit Weight(kg/m)

단면계수

Modulus ofSection(cm3)


336x240x350 18 30 22 230.8 181 44,354 14,197 13.9 7.8 14.6

328x238x348 16 26 22 200.7 158 37,437 12,069 13.7 7.8 14.2

320x236x346 14 22 22 170.8 134 30,907 10,017 13.5 7.7 13.9

312x234x344 12 18 22 141.3 111 24,751 8,038 13.2 7.5 13.5



tw tf r A W Ix Iy ix iy ye HxBtxBb

단위무게

Unit Weight(kg/m)

단면적

SectionalArea(cm2)

단면 2차 모멘트

Moment ofInertia(cm4)

단면 2차 반경

Radius ofGyration(cm)

탄성중립축

elestic NeutralAxis Position(cm)

336x240x350 2,336 3,035 811 7.6 2,955 1,379 2,447,064 636

328x238x348 2,018 2,627 694 7.5 2,533 1,178 2,018,371 424

320x236x346 1,707 2,225 579 7.4 2,125 983 1,624,487 265

312x234x344 1,402 1,828 467 7.3 1,732 793 1,263,539 153



Sxt Sxb Sy yp Zx Zy H JHxBtxBb

소성중립축

Plastic Neutral Axis Position(cm)

탄성단면계수

Modulus ofelastic(cm3)

소성단면계수

Modulus ofPlastic(cm3)

뒤틀림상수

Warping Constant(cm6)

비틀림상수

TorisonalConstant(cm4)

3. Asymmetric H - Beams 비대칭 H형강2. H-Bearing Piles H형강 말뚝


(1) Metric Series KS D 3503, 3515 / KS F 4603

200 x 200 200x204 12 12 13 71.53 56.2 4,980 1,700 8.35 4.88 498 167 1.17

250 x 250

244x252 11 11 16 82.06 64.4 8,790 2,940 10.3 5.98 720 233 1.45

250x255 14 14 16 104.7 82.2 11,500 3,880 10.5 6.09 919 304 1.46

294x302 12 12 18 107.7 84.5 16,900 5,520 12.5 7.16 1,150 365 1.74

300 x 300 300x300 10 15 18 119.8 94.0 20,400 6,750 13.1 7.51 1,360 450 1.75

300x305 15 15 18 134.8 106 21,500 7,100 12.6 7.26 1,440 466 1.76

338x351 13 13 20 135.3 106 28,200 9,380 14.4 8.33 1,670 534 2.02

350 x 350

344x354 16 16 20 166.6 131 35,300 1,800 14.6 8.43 2,050 669 2.04

350x350 12 19 20 173.9 137 40,300 13,600 15.2 8.84 2,300 776 2.04

350x357 19 19 20 198.4 156 42,800 14,400 14.7 8.53 2,450 809 2.06

388x402 15 15 22 178.5 140 49,000 16,300 16.6 9.54 2,520 809 2.32

394x405 18 18 22 214.4 168 59,700 20,000 16.7 9.65 3,030 985 2.33

400 x 400 400x400 13 21 22 218.7 172 66,600 22,400 17.5 10.1 3,330 1,120 2.34

400x408 21 21 22 250.7 197 70,900 23,800 16.8 9.75 3,540 1,170 2.35

414x405 18 28 22 295.4 232 92,800 31,000 17.1 10.2 4,480 1,530 2.37

428x407 20 35 22 360.7 283 119,000 39,400 18.2 104 5,570 1,930 2.41

공칭치수

NominalSize(mm)



H x B t1 t2 r A W Ix Iy ix iy Sx Sy

단면적

SvectionalArea(cm2)

단위무게

Unit Weight(kg/m)



단면 2차 반경


단면계수


표면적

SurfaceArea

(m2/m)

(2) Inch Series

HP8 36 53.57 203.7x207.1 11.30 11.30 68.39 4,950 1,680 8.53 4.95 488 162 1.21 8 x 8

HP10

42 62.50 246.4x255.9 10.45 10.67 80.0 8,740 2,980 10.5 6.12 711 233 1.47

10 x 10

48 71.43 249.9x257.5 12.12 12.12 91.1 10,150 3,451 10.6 6.15 813 268 1.48

57 84.83 253.7x259.7 14.35 14.35 108.4 12,200 4,200 10.6 6.22 964 323 1.49

53 78.87 299.2x305.9 11.05 11.05 100.0 16,400 5,290 12.8 7.26 1,090 346 1.77

HP12 59 87.80 301.7x307.2 12.32 12.32 111.8 18,400 5,959 12.8 7.30 1,220 388 1.78

12 x 12 63 93.75 303.3x308.0 13.08 13.08 118.7 19,600 6,370 12.9 7.32 1,300 415 1.79

74 110.1 308.1x310.3 15.37 15.49 140.6 23,700 7,740 13.0 7.42 1,540 198 1.80

73 108 345.7x370.5 12.8 12.8 138.1 30,300 10,900 14.8 8.86 1,750 587 2.12

HP14 89 132 351.3x373.3 15.6 15.6 168.4 37,600 13,600 14.9 8.97 2,150 726 2.14

14 x 14½ 102 152 355.9x375.5 17.9 17.9 193.5 43,700 15,800 15.0 9.04 2,460 842 2.15

117 174 360.9x378.1 20.4 20.4 211.9 50,800 18,400 15.1 9.12 2,820 975 2.16

공칭치수

NominalSize(inch)

단위무게

UnitWeight

lbs/ft kg/m H x B t1 t2 A Ix Iy ix iy Sx Sy


Standard Sectional Dimension(mm)

단면적

SvectionalArea(cm2)





단면계수


표면적

SurfaceArea

(m2/m)

44 45


광산지보용

형강

(i-Beam

s for Mine Support)

8. Equal Angles 등변 ㄱ형강

Dimensions and Sectional Properties 치수 및 단면성능 KS D 3503, 3515/3502

25 x 25 *25x25 3 4 2 1.427 1.12 0.719 0.797 1.26 0.332 0.747 0.940 0.483 0.448

30 x 30 *30x30 3 4 2 1.727 1.36 0.8441 .42 2.260 .590 0.908 1.14 0.585 0.661

40 x 40 *40x40 5 4.5 3 3.755 2.95 1.17 5.42 8.59 2.25 1.20 1.51 0.774 1.91

45 x 45

45x45 4 6.5 3 3.492 2.74 1.24 6.50 10.3 2.69 1.36 1.72 0.88 2.00

45x45 5 6.5 3 4.302 3.38 1.28 7.91 12.5 3.29 1.36 1.71 0.874 2.46

50x50 4 6.5 3 3.892 3.06 1.37 9.06 14.4 3.76 1.53 1.92 0.983 2.49

50 x 50 50x50 5 6.5 3 4.082 3.77 1.41 11.1 17.5 4.58 1.52 1.91 0.976 3.08

50x50 6 6.5 4.5 5.644 4.43 1.44 12.6 20.0 5.23 1.50 1.88 0.963 3.55

60x60 4 6.5 3 4.692 3.68 1.61 16.0 25.4 6.62 1.85 2.33 1.19 3.66

60 x 60 60x60 5 6.5 3 5.802 4.55 1.66 19.6 31.2 8.09 1.84 2.32 1.18 4.52

60x60 6 6.5 4.5 6.844 5.37 1.69 22.6 35.9 9.3 1.82 2.29 1.17 5.24

65x65 5 8.5 3 6.367 5.00 1.77 25.3 40.1 10.5 1.99 2.51 1.28 5.36

65 x 65 65x65 6 8.5 4 7.527 5.91 1.81 29.4 46.6 12.2 1.98 2.49 1.27 6.26

65x65 8 8.5 6 9.761 7.66 1.88 36.8 58.3 15.3 1.94 2.44 1.25 7.96

70 x 70 70x70 6 8.5 4 8.127 6.38 1.93 37.1 58.9 15.3 2.14 2.69 1.37 7.33

공칭치수

NominalSize(mm)



A x B t r1 r2 A W Cx=Cy Ix=Iy max. min ix=iy max. min Sx=Sy Iu Iv iu iv

단면적

SectionalArea(cm2)

단위무게

Unit Weight(kg/m)



단면 2차 반경


단면계수


중심의 위치

Center of Gravity(cm)

7. I-Beams for Mine Support 광산지보용 I형강

Dimensions and Sectional Properties 치수 및 단면성능 KS E 4002

100 x 80 9 12.5 13 4 26.4 20.7 403 80.5 3.91 1.75 80.7 21.1

130 x 100 12 17 16 7 44.6 35.0 1.130 211 5.05 2.18 175 42.3



H x B t1 t2 r1 r2 A W Ix Iy ix iy Sx Sy

단면적

SectionalArea(cm2)

단위무게

Unit Weight(kg/m)



단면 2차 반경


단면계수


I

경량

형강 (Junior B

eams)

H

5. Junior Beams 경량 H형강


150 x 75 150 75 3.2 4.5 5 9.01 11.48 442 31.7 6.21 1.66 59.0 8.45

150 x 100 150 100 3.2 4.5 5 10.8 13.73 562 75.1 6.40 2.34 74.9 15.0

175 x 90 175 90 3.2 4.5 5 10.7 13.63 725 54.7 7.30 2.00 82.9 12.2

200 x 100 200 100 3.2 4.5 5 12.0 15.33 1,070 75.1 8.34 2.21 107 15.0

200 x 100 200 100 3.2 6.0 5 14.3 18.23 1,330 100 8.53 2.34 133 20.0

200 x 150 200 150 3.2 4.5 5 15.6 19.83 1,500 253 8.68 3.57 150 33.8

250 x 125 250 125 3.2 4.5 5 15.1 19.18 2,100 147 10.5 2.76 168 23.5

250 x 125 250 125 4.5 6.0 5 20.3 25.92 2,770 196 10.3 2.75 221 31.3

300 x 150 300 150 4.5 6.0 5 24.5 31.17 4,830 338 12.4 3.29 322 45.0

350 x 175 350 175 4.5 6.0 5 28.6 36.42 7,720 536 14.6 3.84 441 61.3

공칭치수

NominalSize(mm)



H B t1 t2 r W A Ix Iy ix iy Sx Sy

단위무게

Unit Weight(kg/m)

단면적

SectionalArea(cm2)



단면 2차 반경


단면계수


6. I-Beams I형강


*100 x 75 5 8 7 3.5 16.43 12.9 281 47.3 4.14 1.70 56.2 12.6

*125 x 75 5.5 9.5 9 4.5 20.45 16.1 538 57.5 5.13 1.68 86 15.3

*150 x 75 5.5 9.5 9 4.5 21.83 17.1 819 57.5 6.12 1.62 109 15.3

200 x 100 7 10 10 5 33.06 26.0 2170 138 8.11 2.05 217 27.7

250 x 125 7.5 12.5 12 6 48.79 38.3 5180 337 10.3 2.63 414 53.9

300 x 150 10 18.5 19 9.5 83.47 65.5 12700 886 12.3 3.26 849 118

*300 x 150 11.5 22 23 11.5 97.88 76.8 14700 1080 12.2 3.32 978 149



H x B t1 t2 r1 r2 A W Ix Iy ix iy Sx Sy

단면적

SectionalArea(cm2)

단위무게

Unit Weight(kg/m)



단면 2차 반경


단면계수


Note:위 제품은 별도주문판매(TheseSizesarenotincludedinregularrollingschedules.)

Note:* 는 별도주문판매(Thesesizesindicatedbyanasterisk(*)arenotincludedinregularrollingschedules.)

46 47


부등변

ㄱ형강

(unequal a

ngles)

9. Unequal Angles 부등변 ㄱ형강


100 x 75

100x75 7 10 5 11.87 9.32 3.06 1.83 118 56.9 144 30.8 3.15 2.19 3.49 1.61 0.548 17.0 10.0

100x75 10 10 7 16.50 13.0 3.17 1.94 159 76.1 194 41.3 3.11 2.15 3.43 1.58 0.543 23.3 13.7

125x75 7 10 5 13.62 10.7 4.10 1.64 219 60.4 243 36.4 4.01 2.11 4.23 1.64 0.362 26.1 10.3

125 x 75

125x75 9 10 7 17.30 13.6 4.23 1.70 278 73.8 307 44.9 4.01 2.06 4.21 1.61 0.352 32.8 13.6

125x75 10 10 7 19.00 14.9 4.22 1.75 299 80.9 330 49.0 3.96 2.06 4.17 1.61 0.357 36.1 14.1

125x75 13 10 7 24.31 19.1 4.35 1.87 376 101 415 61.9 3.93 2.04 4.13 1.60 0.352 46.1 17.9

150x90 9 12 6 20.94 16.4 4.95 1.99 485 133 537 80.4 4.81 2.52 5.06 1.96 0.361 48.2 19.0

150 x 90 150x90 10 12 6 23.23 18.2 5.03 2.03 541 146 598 88.7 4.82 2.51 5.07 1.95 0.356 53.1 22.5

150x90 12 12 8.5 27.36 21.5 5.07 2.01 619 167 685 102 4.76 2.47 5.00 1.93 0.357 62.3 24.3



Standard SectionalDimension

(mm)

A x B t r1 r2 A W Cx Cy Ix Iy max. min ix iy max. min Sx Sy Iu Iv iu iv

단면적

SectionalArea(cm2)

단면적

Unit Weight(kg/m)



단면 2차 반경

Radius ofGyration

(cm)tan α


Section(cm3)

중심의 위치

Center of Gravity

(cm)

10. Inverted Angles 부등변 부등후ㄱ형강


200x90 200x90 10 14 14 7 31.52 24.7 6.61 2.08 1,297 202 1,290 125 6.41 2.53 6.41 2.53 0.263 96.9 29.2

250x90 250x90 10 15 178.5 37.47 29.4 8.61 1.92 2,440 223 2,520 147 8.08 2.44 8.20 1.98 0.182 149 31.5

250x90 12 16 178.5 42.95 33.7 8.99 1.89 2,790 238 2,870 160 8.07 2.35 8.18 1.93 0.173 174 33.5

300x90 300x90 11 16 199.5 46.22 36.3 11.0 1.76 4,370 245 4,440 168 9.72 2.30 9.80 1.90 0.136 229 33.8

300x90 13 17 199.5 52.67 41.3 11.3 1.75 4,940 259 5,020 181 9.68 2.22 9.76 1.85 0.128 264 35.8

350x100 350x100 12 17 22 11 57.74 45.3 13.0 1.87 7,440 362 7,550 251 11.3 2.50 11.4 2.08 0.124 338 44.5

400x100 400x100 13 18 24 12 68.59 53.8 15.4 1.77 11,500 388 11,600 277 12.8 2.38 13 2.01 0.0996 467 47.1

450x125 450x12511.5 18 24 12 73.11 57.4 16.2 2.29 15,700 768 16,000 525 14.7 3.24 14.8 2.68 0.126 547 75.2




(mm)

A x B t1 t2 r1 r2 A W Cx Cy Ix max. min Iv ix max min iv Sx Sy Iy Iu iy iu

단면적

SectionalArea(cm2)

단면적

Unit Weight(kg/m)



단면 2차 반경

Radius ofGyration

(cm)tanα


Section(cm3)

중심의 위치

Center of Gravity

(cm)

75x75 6 8.5 4 8.727 6.85 2.06 46.1 73.2 19.0 2.30 2.90 1.48 8.47

75 x 75 75x75 9 8.5 6 12.69 9.96 2.17 64.4 102 26.7 2.25 2.84 1.45 12.1

75x75 12 8.5 6 16.56 13.0 2.29 81.9 129 34.5 2.22 2.79 1.44 15.7

80 x 80

80x80 6 8.5 4 9.327 7.32 2.18 56.4 89.6 23.2 2.46 3.10 1.58 9.7

80x80 7 8.5 4 10.797 8.48 2.23 64.2 102.4 26.8 2.44 3.08 1.58 11.12

90x90 6 10 5 10.55 8.28 2.42 80.7 128 33.4 2.77 3.48 1.78 12.3

90x90 7 10 5 12.22 9.59 2.46 93 148 38.3 2.76 3.48 1.77 14.2

90 x 90

90x90 8 10 7 13.764 10.8 2.50 104 165 42.8 2.74 3.46 1.76 16.0

90x90 9 10 7 15.394 12.1 2.54 114 182 47.3 2.72 3.44 1.75 17.65

90x90 10 10 7 17.0 13.3 2.57 125 199 51.7 2.71 3.42 1.74 19.5

90x90 13 10 7 21.71 17.0 2.69 156 248 65.3 2.68 3.38 1.73 24.8

100x100 7 10 5 13.62 10.7 2.71 129 205 53.2 3.08 3.88 1.98 17.7

100 x 100

100x100 8 10 8 15.36 12.1 2.75 144 229 59.4 3.06 3.86 1.97 19.86

100x100 10 10 7 19.0 14.9 2.82 175 278 72.0 3.04 3.83 1.95 24.4

100x100 13 10 7 24.31 19.1 2.94 220 348 91.1 3.00 3.78 1.94 31.1

120 x 120 120x120 8 12 5 18.76 14.7 3.24 258 410 106 3.71 4.67 2.38 29.5

130x130 9 12 6 22.74 17.9 3.53 366 583 150 4.01 5.06 2.57 38.7

130 x 130

130x130 10 12 6 25.16 19.7 3.57 403 641 165 4.0 5.05 2.56 42.8

130x130 12 12 8.5 29.76 23.4 3.64 467 743 192 3.96 5.0 2.54 49.9

130x130 15 12 8.5 36.75 28.8 3.76 568 902 234 3.93 4.95 2.53 61.5

150x150 10 14 7 29.21 22.9 4.06 627 997 258 4.63 5.84 2.97 57.3

150 x 150

150x150 12 14 7 34.77 27.3 4.14 740 1.180 304 4.61 5.82 2.96 68

150x150 15 14 10 42.74 33.6 4.24 888 1.140 365 4.56 5.75 2.92 82.6

150x150 19 14 10 53.38 41.9 4.40 1.090 1.730 451 4.52 5.69 2.91 103

175 x 175

175x175 12 15 11 40.52 31.8 4.73 1.170 1.860 480 5.38 6.78 3.44 91.8

175x175 15 15 11 50.21 39.4 4.85 1.440 2.290 589 5.35 6.75 3.42 114

200x200 15 17 12 57.75 45.3 5.46 2.180 3.470 891 6.14 7.75 3.93 150

200 x 200 200x200 20 17 12 76.0 59.7 5.67 2.820 4.490 1.160 6.09 7.68 3.90 197

200x200 25 17 12 93.75 73.6 5.86 3.420 5.420 1.410 6.04 7.61 3.88 242

250 x 250

250x250 25 24 12 119.4 93.7 7.10 6.950 11.100 2.860 7.63 9.62 4.90 388

250x250 35 24 18 162.6 128 7.45 9.110 14.400 3.790 7.49 9.42 4.83 519

공칭치수

NominalSize(mm)



A x B t r1 r2 A W Cx=Cy Ix=Iy max. min ix=iy max. min Sx=Sy Iu Iv iu iv

단면적

SectionalArea(cm2)

단면적

Unit Weight(kg/m)



단면 2차 반경


단면계수


중심의 위치


등변

ㄱ형강 (equal a

ngles)

Note:*는 별도주문판매(Thesesizesindicatedbyanasterisk(*)arenotincludedinregularrollingschedules.)

48 49


평행채널

(Parallel Flange Channels)

13. Sheet Piles 강널말뚝

Dimensions and Sectional Properties 치수 및 단면성능 KS F 4604

SP-Ⅱ 400 100 10.5 61.2 153.0 48.0 120 1,240 8,740 152 874

SP-Ⅲ 400 125 13.0 76.4 191.0 60.0 150 2,220 16,800 223 1,340

SP-ⅢA(E) 400 150 13.1 74.4 186.0 58.4 146 2,790 22,800 250 1,520

SP-ⅢA(D) 400 150 13.0 76.4 191.0 60.0 150 3,060 22,600 278 1,510

SP-Ⅳ 400 170 15.5 96.9 242.5 76.1 190 4,670 38,600 362 2,270

SP-ⅤM 500 175 16.5 109.6 219.2 86.0 172 5,345 40,290 383 2,310

SP-ⅤA 500 200 19.5 133.8 267.6 105.0 210 7,960 63,000 520 3,150

SP-Ⅱw 600 130 10.3 78.7 131.2 61.8 103 2,110 13,000 203 1,000

SP-Ⅲw 600 180 13.4 103.9 173.2 81.6 136 5,220 32,400 376 1,800

SectionType


Dimension

B H t Per Pile Per Wall Per Pile Per Wall Per Pile Per Wall Per Pile Per Wall Width Width Width Width mm mm mm cm2 cm2/m kg/m kg/m2 cm4 cm4/m cm3 cm3/m

단면적

Sectional Area단위무게

Unit Weight단면 2차 모멘트

Moment of Inertia단면계수

Modulus of Section


100 x 50 4.5 7.5 8 - 11.6 9.1 1.71 189 28.5 4.0 1.6 37.7 8.6

125 x 65 5.5 8 8 - 16.7 13.1 2.14 424 70.3 5.0 2.1 67.8 16.1

150 x 75 6 10 10 - 23.2 18.2 2.54 864 131.3 6.1 2.4 115.1 26.5

200 x 80 6.5 11.5 12 - 30.5 24.0 2.55 1,984 192.5 8.1 2.5 198.4 35.3

200 x 90 7.5 13.5 14 - 38.1 29.9 3.02 2,501 305.7 8.1 2.8 250.1 51.1

250 x 90 8.5 13 14 - 43.3 34.0 2.64 4,187 329.2 9.8 2.8 335.0 51.8

300 x 90 8.5 13 14 - 47.5 37.3 2.44 6,432 348.5 11.6 2.7 428.8 53.2

380 x 100 10 16 18 - 68.2 53.5 2.63 14,527 592.6 14.6 2.9 764.6 80.4



H x B t1 t2 r1 r2 A W Cy Ix Iy ix iy Sx Sy

단면적

SectionalArea(cm2)

단위무게

Unit Weight(kg/m)

중심의 위치




단면 2차 반경


단면계수


12. Parallel Flange Channels 평행채널

ㄷ형강 (Channels)

11. Channels ㄷ형강



KS D 3503, 3515/3502

*75 x 40 5 7 8 4 8.818 6.92 1.28 75.3 12.2 2.92 1.17 20.1 4.47

*100 x 50 5 7.5 8 4 11.92 9.36 1.54 188 26.0 3.97 1.48 37.6 7.52

125 x 65 6 8 8 4 17.11 13.4 1.90 424 61.8 4.98 1.90 67.8 13.4

150 x 75 6.5 10 10 5 23.71 18.6 2.28 861 117 6.03 2.22 115 22.4

200 x 80 7.5 11 12 6 31.33 24.6 2.21 1.950 168 7.88 2.32 195 29.1

200 x 90 8 13.5 14 7 38.65 30.3 2.74 2.490 277 8.02 2.68 249 44.2

250 x 90 9 13 14 7 44.07 34.6 2.40 4.180 294 9.74 2.58 334 44.5

300 x 90 9 13 14 7 48.57 38.1 2.22 6.440 309 11.5 2.52 429 45.7

380 x 100 10.5 16 18 9 69.69 54.5 2.41 14.500 535 14.5 2.78 763 70.5

*380 x 100 13 20 24 12 85.71 67.3 2.54 17.600 655 14.3 2.76 926 87.8



H x B t1 t2 r1 r2 A W Cy Ix Iy ix iy Sx Sy

단면적

SectionalArea(cm2)

단위무게

Unit Weight(kg/m)

중심의 위치




단면 2차 반경


단면계수


Designation(Nominal Depth in inches and Welght in Pounds per Linesr Foot)

Area A,In.2

Depthd, In.

FlangeWeb

Thickness tw, In.A

Designation(Nominal Depth In Millimetres in Mass InWelght In Killograms per Metre)

Area A, mm2

Depthd, mm

FlangeWeb

Thickness tw, mmA

Width bf, In.

Thickness tf, In.A

Width bf, mm

Thickness tf, mmA

C 15x50 14.7 15 3.716 0.65 0.716 C 380x74 9,480 381 94 16.5 18.2

x40 11.8 15 3.52 0.65 0.52 x60 7,610 381 89 16.5 13.2

x33.9 9.96 15 3.4 0.65 0.4 x50.4 6,430 381 86 16.5 10.2

C 12x30 8.82 12 3.17 0.501 0.51 C 310x45 5,690 305 80 12.7 13

x25 7.35 12 3.047 0.501 0.51 x37 4,740 305 77 12.7 9.8

x20.7 6.09 12 2.942 0.501 0.382 x30 3,930 305 74 12.7 7.2

C 10x30 8.82 10 3.033 0.436 0.673 C 250x45 5,690 254 76 11.1 17.1

x25 7.35 10 3.886 0.436 0.526 x37 4,740 254 73 11.1 13.4

x20 5.88 10 2.739 0.436 0.379 x30 3,790 254 69 11.1 9.6

x15.3 4.49 10 2.6 0.436 0.24 x22.8 2,900 254 65 11.1 6.1

C 8x18.75 5.51 8 2.527 0.39 0.487 C 200x27.9 3,550 203 64 9.9 12.4

x13.75 4.04 8 2.345 0.39 0.303 x20.5 2,610 203 59 9.9 7.7

x11.5 3.38 8 2.26 0.39 0.22 x17.1 2,180 203 57 9.9 5.6

Inch 8˝, 10˝, 12˝, 15˝


*Actualflangeandwebthicknessesvaryduetomillrollingpractices:howeverpermittedvariationsforsuchdimensionsarenotaddressed.

50 51


경레일 (light Rails)

15. Light Rails 경레일

Dimensions and Sectional Properties 치수 및 단면성능 KS R 9101

15kg 79.3779.3742.86 8.33 22.22 13.5 35.33 304.8 19.3 15.2 38.92 156.1 2.83 38.59

*20kg 88.9 88.9 47.63 9.92 25.8 15.88 39.69 304.8 25.4 19.9 272.22 58.83

22kg 93.6693.66 50.8 10.7226.9916.67 41.67 304.8 28.4 22.3 45.21 334.82 3.45 69.60

종류

NominalSize



(mm)

A B C D e F G R S W Yb Ix ix Sx

단면적

SectionalArea(cm2)

단위무게

Unit Weight(kg/m)

중심의 위치

Distance fromRail BasetoNeutral Axis

(mm)

단면2차 모멘트


단면2차 반경

Radius ofGyration

(cm)

단면계수


철도레일 (Railw

ay Rails)

14. Railway Rails 철도레일

Dimensions and Sectional Properties 치수 및 단면성능 KS R 9106

Amm 107.96 122.24 140.0 144.46 153.0 174.0 174.0 148 - - - - - - 128.59 142.88 159 172 135.0

in - - - - - - - - 5-5/8 6 6-5/8 6-13/16 7-1/8 -5/16 5-1/16 5-5/8 - - -

Bmm 107.95 122.24 122.0 127.0 127.0 145.0 145.0 140 - - - - - - 114.3 127.0 140 150 140.0

in - - - - - - - - 5-1/8 5-3/8 5-1/2 5-1/2 6 6 4-1/2 5 - - -

Cmm 60.33 62.71 64.0 67.87 65.0 65.0 65.0 65.3 - - - - - - 61.91 66.67 70 74.3 100

in - - - - - - - - 2-9/16 2-11/162-23/322-21/32 3 2-15/16 2-7/16 2-5/8 - - -

Dmm 12.3 13.49 14.0 14.29 150 16.5 16.5 16.5 - - - - - - 12.7 13.89 16 16.5 32.0

in - - - - - - - - 9/16 9/16 5/8 5/8 25/32 11/16 1/2 35/64 - - -

Emm 30.95 36.12 41.0 46.04 49.0 49.0 49.0 35 - - - - - - 42.07 46.04 49.4 51 43.0

in - - - - - - - - 1-15/321-21/321-11/16 1-7/8 1-3/4 1-15/161-21/321-13/16 - - -

Fmm 19.45 21.43 25.5 27.78 30.0 30.1 30.1 52 - - - - - - 23.81 26.19 30.2 31.5 26.5

in - - - - - - - - 1 1-1/16 1-1/18 1-1/8 1-3/16 1-3/16 15/16 1-1/32 - - -

Gmm 48.22 53.78 70.0 63.1 76.0 61.8 61.8 28 - - - - - - 64.29 71.44 74.97 - 100

in - - - - - - - - 2-29/321-31/32 3-1/4 3-1/8 3-7/8 3-7/8 2-17/322-13/16 - - -

Rmm 304.8 304.8 500.0 254.0 500.0 500.0 500.0 - - - - - - - 508.0 508.0 508.0 120 93.38

in - - - - - - - - 14 14 14 14 16 20 20 20 - - -

Scm2 38.26 47.3 52.0 64.3 64.2 77.5 77.3 88.5 - - - - - - 47.74 57.35 69.34 76.86 66.9

in2 - - - - - - - - 8.82 9.95 11.25 11.65 12.95 13.35 7.40 8.89 - - -

Wkg/m 30.1 37.2 40.9 50.4 50.4 60.8 60.7 69.5 44.64 50.35 56.90 58.93 65.53 67.56 37.48 45.05 54.43 60.34 73.3

1b/yd - - - - - - - - 90.0 101.5 114.7 118.8 132.2 136.2 75.55 90.76 - - -

Ydmm 52.07 58.4 68.9 66.9 71.6 77.8 77.6 62.22 - - - - - - 63.82 69.97 76.2 80.95 62.22

in - - - - - - - - 2.54 2.75 2.98 3.12 3.20 3.347 2.51 2.76 - - -

Jcm4 606 952 1,360 1,740 1,960 3,090 3,064 2,120 - - - - - - 1.049 1,564 2,346 3,055 2,000

in4 - - - - - - - - 38.7 49.0 65.5 71.4 88.2 94.9 - - - - -

Zcm3 116 164 197 261 274 397 395 340.8 - - - - - - 16.18 214.8 313.0 377.0 299

in3 - - - - - - - - 15.2 17.8 22.0 22.9 27.6 28.3 -

표준

단면치수

StandardSectionalDimension

단면적SectionalArea단위무게UnitWeight중심축의 거리

Distance from Rail Base toNeutral Axis단면2차모멘트Momentof inertia단면계수Modulusof Section

항목 Items 30A 37A 40N 50PS 50N 60 60K 70s * * * * * * *75A *90A *54A 60 73

90lbs 100lbs 115lbs 119lbs 132lbs 136lbs

규격

Specifications KS,JIS AReA BS UIC HS

* *



52

철근 (Reinforcing B

ars)

53



ars)

(1) 1톤 단위

2) 이형봉강포장(이론중량) 조견표(KS D 3504기준) 환산중량 단 중 : KS 3504 기준 1 본 중량 : 단중×1본길이(소수2자리 맺음) 포장중량 : 1본중량×포장본수(kg단위로 맺음)

1본중량 3.36 3.64 3.92 4.20 4.48 5.04 5.60 6.16 6.72

D10 0.560

총 본 수 300 270 270 240 210 210 180 150 150

중 량 1,008 983 10,528 1,008 941 1,058 1,008 924 1,008

총 길 이 1,800 1,755 1,890 1,800 1,680 1,890 1,800 1,650 1,800

1본중량 5.97 6.47 6.97 7.46 7.96 8.96 9.95 10.95 11.94

D13 0.995

총 본 수 160 160 140 140 120 120 100 100 80

중 량 955 1,035 976 1,044 955 1,075 995 1,095 955

총 길 이 690 1,040 980 1,050 960 1,080 1,000 1,100 960

1본중량 9.36 10.14 10.92 11.70 12.48 14.04 15.60 17.16 18.72

D16 1.56

총 본 수 105 105 90 90 75 75 60 60 60

중 량 983 1,065 983 1,053 936 1,053 936 1,030 1,123

총 길 이 630 682.5 630 675 600 675 600 660 720

1본중량 13.50 14.63 15.75 16.88 18.00 20.25 22.50 24.75 27.00

D19 2.25

총 본 수 74 68 63 59 56 49 44 40 37

중 량 999 995 992 669 1,008 992 990 990 999

총 길 이 444 442 440 442.5 448 441 440 440 444

1본중량 18.24 19.76 21.26 22.80 24.32 27.36 30.40 33.44 36.48

D22 3.04

총 본 수 55 51 47 44 41 37 33 30 27

중 량 1,003 1,008 1,000 1,003 997 1,012 1,003 1,003 985

총 길 이 330 331.5 329 330 328 333 330 330 324

1본중량 23.88 25.87 27.86 29.85 31.84 35.82 39.80 43.78 47.76

D25 3.98

총 본 수 42 39 36 33 32 28 25 23 21

중 량 1,003 1,009 1,003 985 1,019 1,003 995 1,007 1,003

총 길 이 252 253.5 252 247.5 256 252 250 253 252

1본중량 30.24 32.76 35.28 37.80 40.32 45.36 50.40 55.44 60.48

D29 5.04

총 본 수 33 31 28 26 25 22 20 18 17

중 량 998 1,016 988 983 1,008 998 1,008 998 1,028

총 길 이 198 201.5 196 195 200 198 200 198 204

1본중량 37.38 40.50 43.61 46.73 49.84 56.07 62.30 68.53 74.76

D32 6.23

총 본 수 27 25 23 21 20 18 16 15 13

중 량 1,009 1,013 1,003 981 997 1,009 997 1,028 972

총 길 이 162 162.5 161 157.5 160 162 160 165 156

호칭명 Designation

단위중량Unit Weight

(kg/m) 구분

Classification

길이Length

(m) 6 6.5 7 7.5 8 9 10 11 12

D10 0.560 9.53 0.7133 3.0 6.7 0.4 0.8 7.5 3 0.376 0.560 10 0.617 10 0.616

D13 0.995 12.7 1.267 4.0 8.9 0.5 1.0 10.0

4 0.668 0.994 12 0.888 12 0.888

14 1.210 - -

D16 1.56 15.9 1.986 5.0 11.1 0.7 1.4 12.5 5 1.043 1.552 16 1.580 16 1.579

D19 2.25 19.1 2.865 6.0 13.4 1.0 2.0 15.0

6 1.502 2.235 18 2.00 - -

20 2.47 20 2.466

D22 3.04 22.2 3.871 7.0 15.5 1.1 2.2 17.5 7 2.044 3.042 22 2.98 - -

D25 3.98 25.4 5.067 8.0 17.8 1.3 2.6 20.0 8 2.670 3.973 25 3.85 25 3.854

D29 5.04 28.6 6.424 9.0 20.0 1.4 2.8 22.5 9 3.400 5.060 28 4.83 - -

D32 6.23 31.8 7.942 10.0 22.3 1.6 3.2 25.0 10 4.303 6.403 32 6.31 32 6.313

D35 7.51 34.9 9.566 11.0 24.4 1.7 3.4 27.5 11 5.313 7.906 - - - -

D38 8.95 38.1 11.40 12.0 26.7 1.9 3.8 30.0 - - - 36 7.99 - -

D41 10.5 41.3 13.40 13.0 28.9 2.1 4.2 32.5 40 9.87 40 9.864

D43 11.4 43.0 14.52 13.5 30.1 2.2 4.4 33.8 14 7.65 11.38

D51 15.9 50.8 20.27 16.0 35.6 2.5 5.0 40.0

- - - 45 12.50 - -

50 15.40 50 15.413

D57 20.3 57.3 25.79 18.0 40.1 2.9 5.8 45 18 13.60 20.24 - - - -

16. Reinforcing Bars 철근

1) Dimensions and Weight 치수 및 중량

호칭명

Desig-nation

KS D 3504, JIS G 3112 ASTM A 615 SAUDI ARABIANStandard BS 4449

단위

무게

UnitWei-ght

호칭명

BarDesign-

ationNo.

호칭명

NominalDiameter

단위무게

UnitWeight

단위무게

UnitWeight

호칭명

NominalDiameter

단위무게

UnitWeight

직경 Dia-

meter

단면적

Sec-tionalArea

둘레

Peri-meter

마디의평균간격최대치Max.

AverageSpacing

마디높이의평균

최소치Min.

AverageHeight

마디높이의최대치

Max.Height

마디틈의합계의

최대치

Max.Gap

공칭치수

Nominal Dimensions마디 및 리브의 치수

Deformation Requirements

kg/m mm cm2 cm cm mm mm mm lb/ft kg/m mm kg/m mm kg/m

：기본 규격임 : 사전주문에 의함

54


ars)

55



ars)

1본중량 13.50 14.63 15.75 16.88 18.00 20.25 22.50 24.75 27.00

D19 2.25

총 본 수 140 140 120 120 120 100 100 80 80

중 량 1,896 2,048 1,890 2025 2,160 2,025 2,250 1,998 2,160

총 길 이 888 884 882 885 895 882 880 880 888

1본중량 18.24 19.76 21.28 22.80 24.32 27.36 30.40 33.44 36.48

D22 3.04

총 본 수 110 102 94 88 82 74 66 60 54

중 량 2,006 2,016 2,000 2,006 1,994 2,024 2,006 2,006 1,970

총 길 이 660 663 658 660 656 666 660 660 648

1본중량 23.88 25.87 27.86 29.85 31.84 35.82 39.80 43.78 47.76

D25 3.98

총 본 수 84 78 72 66 64 56 50 46 42

중 량 2,006 2,018 2,006 1,970 2,038 2,006 1,990 2,014 2,006

총 길 이 504 507 504 495 512 504 500 506 504

1본중량 30.24 32.76 35.28 37.80 40.32 45.36 50.40 55.44 60.48

D29 5.04

총 본 수 66 62 56 52 50 44 40 36 34

중 량 1,996 2,032 1,976 1,966 2,016 1,996 2,016 1,996 2,056

총 길 이 396 403 392 390 400 396 400 396 408

1본중량 37.38 40.50 43.61 46.73 49.84 56.07 62.30 68.53 74.76

D32 6.23

총 본 수 54 50 46 42 40 36 32 30 26

중 량 2,018 2,026 2,006 1,962 1,994 2,018 1,994 2,056 1,944

총 길 이 324 325 322 315 320 324 320 330 312

1본중량 45.06 48.82 52.57 56.33 60.08 67.59 75.10 82.61 90.12

D35 7.51

총 본 수 44 40 38 36 34 30 26 24 22

중 량 1,982 1,952 1,998 2,028 2,042 2,028 1,952 1,982 1,982

총 길 이 264 260 266 270 272 270 260 264 264

1본중량 53.70 58.18 62.65 67.13 71.60 80.55 89.50 98.45 107.40

D38 8.95

총 본 수 38 34 32 30 28 24 22 20 18

중 량 2,040 1,978 2,004 2,014 2,004 1,934 1,970 1,970 1,934

총 길 이 228 221 224 225 224 216 220 220 216

1본중량 63.00 68.25 73.50 78.75 84.00 94.50 105.00 115.50 126.00

D41 10.5

총 본 수 32 30 28 26 24 22 20 18 16

중 량 2,016 2,048 2,058 2,048 2,016 2,080 2,100 2,080 2,016

총 길 이 192 195 196 195 192 198 200 198 192

1본중량 95.40 103.35 11.3 119.25 127.20 143.10 159.00 174.90 190.00

D51 15.9

총 본 수 22 20 18 16 16 14 12 12 10

중 량 2,098 2,068 2,004 1,908 2,036 2,004 1,908 2,908 1,908

총 길 이 132 130 126 120 128 126 120 132 120

6 6.5 7 7.5 8 9 10 11 12 호칭명 Designation


(kg/m) 구분

Classification

길이Length

(m)

(2) 2톤 단위

1본중량 3.36 3.64 3.92 4.20 4.48 5.04 5.60 6.16 6.72

D10 0.560

총 본 수 600 540 540 480 420 420 360 300 300

중 량 2,016 1,966 2,116 2,016 1,882 2,116 2,016 1,848 2,016

총 길 이 3,600 3,510 3,780 3,600 3,360 3,780 3,600 3,300 3,600

1본중량 5.97 6.47 6.97 7.46 7.96 8.96 9.95 10.95 11.94

D13 0.995

총 본 수 320 320 280 280 240 240 200 200 160

중 량 1,910 2,070 1,952 2,088 1,910 2,150 1,990 2,190 1,910

총 길 이 1,920 2,080 1,960 2,100 1,920 2,160 2,000 2,200 1,920

1본중량 9.36 10.14 10.92 11.70 12.48 14.04 15.60 17.16 18.72

D16 1.56

총 본 수 210 210 180 180 150 150 120 120 120

중 량 1,966 2,130 1,966 2,106 1,872 2,106 1,872 2,060 2,246

총 길 이 1,260 1,365 1,260 1,350 1,200 1,350 1,200 1,320 1,440

6 6.5 7 7.5 8 9 10 11 12

1본중량 45.06 48.82 52.57 56.33 60.08 67.59 75.10 82.61 90.12

D35 7.51

총 본 수 22 20 19 18 17 15 13 12 11

중 량 991 976 999 1,014 1,021 1,014 976 991 991

총 길 이 132 130 133 135 136 135 130 132 132

1본중량 53.70 58.18 62.65 67.13 71.60 80.55 89.50 98.45 107.40

D38 8.95

총 본 수 19 17 16 15 14 12 11 10 9

중 량 1,020 989 1,002 1,007 1,002 967 985 985 967

총 길 이 114 110.5 112 112.5 112 108 110 110 108

1본중량 63.00 68.25 73.50 78.75 84.00 94.50 105.00 115.50 126.00

D41 10.5

총 본 수 16 15 14 13 2 11 10 9 8

중 량 1,008 1,024 1,029 1,024 1,008 1,040 1,050 1,040 1,008

총 길 이 96 97.5 98 97.5 96 99 100 99 96

1본중량 95.40 103.35 111.3 119.25 127.20 143.10 159.00 174.90 190.00

D51 15.9

총 본 수 11 10 9 8 8 7 6 6 5

중 량 1,049 1,034 1,002 954 1,018 1,002 954 1,049 954

총 길 이 66 65 63 60 64 63 60 66 60

6 6.5 7 7.5 8 9 10 11 12 호칭명Designation


(kg/m) 구분

Classification

길이Length

(m)

호칭명 Designation


(kg/m) 구분

Classification

길이Length

(m)

：기본 규격임 : 사전주문에 의함

：기본 규격임 : 사전주문에 의함 ：기본 규격임 : 사전주문에 의함

56

원형강 (Round B

ars)

57


원형강 (Round B

ars)

2) Round Bar Steel Group 원형강 강종별 분류

저탄소강 SM10C,SM15C,SM20C,SM25C,A105,SAE1008,C:0.28%↓

Low Carbon Steel SAE1012,SS400,SS490,SS540

중탄소강 SM30C,SM35C,SM38C,SM40C,SM43C,SM45C,SM48C,SM50C,SM53C,C:0.3%↑

Middle Carbon Steel SM55C,SM58C,S48CM,S53CM,S45CR,S55CR,1050M

Cr 강SCR415(H),SCR420(H),SCR435(H),SCR440(H),SCR445(H)

Cr 첨가

Cr Steel

Cr-Mo 강SCM415(H),SCM420(H),SCM435(H),SCM440(H),SCM445(H)

Cr-Mo 첨가

Cr-Mo Steel

SMN420(H),SMN443(H)

Mn 첨가

S43BCH,15B37M,10B35M,30MNB4,SCR440B

B 첨가

SBC70,R4,R3S

S40CVS,S45CVMN

탄소강

Carbon

Steel

합금강

Low Alloy

Steel

망간강

Mn Steel

보론강

Boron Steel

체인강

Chain Steel

특수용도강

Specific Use Steel

강종

Steel Group강종명

Material비고

Remark

17. Round Bars 원형강

1) Dimensions and Weight 치수 및 중량 KS D 3707/3708/3709/3711/3723/3724/3752/3754

*19 2.835 2.23 0.640 0.6734

*20 3.142 2.47 0.758 0.7854

22 3.801 2.98 1.150 1.0454

23 4.155 3.26 1.374 1.1945

24 4.524 3.55 1.629 1.3572

25 4.909 3.85 1.917 1.5340

26 5.309 4.17 2.243 1.7255

28 6.158 4.83 3.017 2.1551

30 7.069 5.55 3.976 2.6507

32 8.042 6.31 5.147 3.2170

34 9.079 7.31 6.560 3.8587

35 9.621 7.55 7.366 4.2092

36 10.18 7.99 8.245 4.5804

38 11.34 8.90 10.24 5.3870

40 12.57 9.87 12.556 6.2831

42 13.85 10.9 15.27 7.2736

45 15.90 12.5 20.13 8.9462

48 18.10 14.2 26.057 10.857

50 19.64 15.4 30.68 12.272

52 21.24 16.7 35.891 13.804

55 23.76 18.7 44.92 16.334

58 26.42 20.7 55.450 19.155

60 28.27 22.2 63.62 21.206

65 33.18 26.0 87.62 26.961

70 38.48 30.2 117.9 33.674

75 44.18 34.7 155.3 41.417

80 50.27 39.5 201.1 50.265

85 56.75 44.5 256.2 60.292

90 63.62 49.9 322.1 71.569

95 70.88 55.6 399.8 84.173

100 78.54 61.7 490.9 98.174

105 86.59 68.0 596.7 113.65

110 95.03 74.6 718.7 130.67

115 103.9 81.5 858.5 149.31

120 113.1 88.8 1,018 169.65

130 132.7 104 1,402 215.69

140 153.9 121 1,886 269.39

150 176.7 139 2,485 331.34

160 201.1 158 3,217 402.12

170 227.0 178 4,099 482.33

180 254.5 200 5,153 572.56

190 283.5 223 6,397 673.38

200 314.2 247 7,854 785.40

220 280.1 298 11,499 1,045.47

230 415.3 326 13,730 1,194.00

*240 452.4 355 16,286 1,357.17

*250 490.9 385 19,175 1,533.98

*300 706. 555 39,761 2,650.72

직경

Dia.(mm)

단면적

Sectional Area(cm2)

단위무게

Unit Weight(kg/m)

단면2차모멘트

Moment of Inertia(cm4)

단면계수

Section Modulus

(cm3)

직경

Dia.(mm)

단면적

Sectional Area(cm2)

단위무게

Unit Weight(kg/m)

단면2차모멘트

Moment of Inertia(cm4)

단면계수

Section Modulus

(cm3)


58

열연코일 (H

ot Rolled Coil)

59


열연코일 (H

ot Rolled Coil)

2) Standard & Applications 제품규격

연 강 판

(Hot Rolled Mild Steel Plates, Sheet)SPHC,D,E SPHC,D,E A621 DD11

냉연용 탄소강재

CQ3

(Reduced Carbon Steel for

DQ

Cold Rolles Steel) DDQ

EDDQ

SS330 SS330

일반구조용 SS400 SS400 A36 USt34-2

(Rolled Steel for General Structure) SS490 SS490 A570-40 S275JR

SS540 SS540 A570-50 E295

SM400A,B,C SM400A,B,CA570-40

S275JR

용접구조용 SM490A,B,C SM490A,B,CA573-70

S275J2-3

(Rolled Steels for Weled Structure) SM490YA,YB SM490YA,YBA633-E

S420N

SM520B,C SM520B,C S355J2

고내후성강

(Superior Atmosphere SPA-H SPA-H

Corrosion Resisting Rolled Steels)

강 관 용

(Hot Rolled Carbon Steel SPHT1,2,3,4 HRS1,2,3,4 SS30,44 S235JR

Strip for Pipes & Tubes)

STK290 STK290

일반 구조용 탄소강관 STK400 STK400A633-A,C S355J2-3

(Carbon Steel Tubes for STK490 STK490

General Structural Purposes) STK500 STK500

STK540* STK540*

기계 구조용 탄소강관

STKM11A STKM11A

(Carbon Steel Tubes for

STKM12A STKM12AA512 S235JR

Machine Structural Purposes)

STKM13A* STKM13A*

STKM13B* STKM13B*

철탑 구조용 고장력강관 STKT540 STKT540

(High Tensile Strength Steel Tubes for STKT590* STKT590*

Tower Structural Purposes)

열교환기용 탄소강관 STB340* STBH340*

(Carbon Steel Boiler and Heat STB410* STBH410*

Exchanger Tubes) STB510* STBH510*

용 도

Applications JIS KS ASTM/SAe eN

규 격 Standard

18. Hot Rolled Coil 열연코일

1) Production Range 생산가능 범위

A 열연

A HR Mill (CSP)1.6~16.0 900~1,560 Max28 only762 Max1,950

B 열연 B HR Mill (HSM)

1.2~16.0 720~1,900 Max37 only762 Max2,150

C 열연 C HR Mill (HSM)

1.2~25.4 800~2,000 Max35 only762 Max2,150

공 장

Factory두께 (mm)

Thickness폭 (mm)Width

포장중량 (TON)Weight

내경 (mm)Inside Diameter

외경 (mm)Outside Diameter

A 열연

A HR Mill (CSP)1.6~16.0 900~1,560 Max21 only762 Max1,950

B 열연

B HR Mill (HSM)1.2~16.0 720~1,900 Max24 only762 Max2,150

공 장

Factory두께 (mm)

Thickness폭 (mm)Width

포장중량 (TON)Weight

내경 (mm)Inside Diameter

외경 (mm)Outside Diameter

(3) HR. Checkered Coil

ｱｱｱｱ

(2) HR. Plate

(1) HR. Coil

선급 Hull Structure

MAX16.0 720~1,900 MAX22,000 KR,ABS,BV,GL,LR,DNV,RINA

비선급 Weled Structure

MAX16.0 720~1,900 MAX22,000

두께 (mm)Thickness

구 분

Classification폭 (mm)Width

길이 (mm)Length

선급 인증현황

Class Certification

Pattern A Pattern B

ｱｱｱｱ

pattern A 2.3~2.5 30 7.3~7.5 36~38

pattern B 1.6~2.0 25 7.1~8.4 32~34

산높이 (mm)Height

길이 (mm)Length

폭 (mm)Width

간격 (mm)Pitch

비고

Remark구 분

Type

*:사전협의 필요Priordiscussionisnecessary

60

열연코일 (H

ot Rolled Coil)

61


열연코일 (H

ot Rolled Coil)

규 격

Designation화학성분(wt%) Chemical Composition

C Si Mn P S

SPHC SPHD SPHE

≤0.15≤0.10≤0.10

—≤0.60≤0.50≤0.50

≤0.050≤0.040≤0.030

≤0.050≤0.040≤0.035

CQ3 DQDDQ EDDQ

≤0.15≤0.12≤0.10≤0.08

—

≤0.60≤0.50≤0.45≤0.45

≤0.050≤0.040≤0.030≤0.030

≤ 0.050≤ 0.040≤ 0.030≤ 0.030

SS300 SS400 SS490 SS540

———

≤ 0.30

—

———

≤ 1.60

≤0.050≤0.050≤0.050≤0.040

≤0.050≤0.050≤0.050≤0.040

SM400A SM400B SM400C

≤ 0.23≤ 0.20≤ 0.18

—≤0.35≤0.35

2.5XC0.60~1.40≤ 1.40

≤0.035 ≤0.035

SM490A SM490B SM490C

≤0.20≤0.18≤0.18

≤0.55 ≤0.160 ≤0.035 ≤0.035

SM490YASM490YB

≤0.20 ≤0.55 ≤0.16 ≤0.035 ≤0.035

SM520BSM520C

≤0.20 ≤0.55 ≤0.16 ≤0.035 ≤0.035

SPHT1 SPHT2 SPHT3 SPHT4

≤0.10≤0.18≤0.25≤0.30

≤0.35

≤0.50≤0.60

0.30~0.900.30~1.00

≤0.040 ≤0.040

STK290STK400STK490STK500STK540*

—≤0.25≤0.18≤0.30≤0.23

——

≤0.55≤0.35≤0.55

——

≤1.500.3~1.00≤1.50

≤0.050≤0.040≤0.040≤0.040≤0.040

≤0.050≤0.040≤0.040≤0.040≤0.040

STKM11A STKM12A STKM13A* STKM13B*

≤0.12≤0.20≤ 0.25≤0.25

≤0.35

≤0.60≤0.60

0.30~0.900.30~0.90

≤0.040 ≤0.040

용 도 Applications

규 격 Standard

JIS KS ASTM/SAe eN API

석유 및 천연가스 유정강관

(Hot Rolled Carbon SteelStrip for Petoleum, Natural Gas Casing & Tubing pipe)

APIJ55

석유 및 천연가스 수송강관

(Hot Rolled Carbon SteelStrip for Petoleum,Natural Gas Line Pipe)

API5LBAPIX42APIX46APIX52APIX56APIX60APIX65APIX70

기계 구조용 탄소강재

(Carbon Steels for Machine Structural Use)

S10CS12CS17CS30CS35CS45C

SAE1006SAE1008SAE1010SAE1012SAE1017SAE1022SAE1030SAE1035SAE1045

자동차 구조용 열간 압연 강판 및 강대

(Hot Rolled Steel Plates, Sheets and Strip for Automobile Structural Uses)

SAPH310SAPH370SAPH400SAPH440

SAPH310SAPH370SAPH400SAPH440

자동차용 가공성 열간 압연 고장력강판 및 강대

(Hot Rolled High Strength Steel Sheets with Improved Formability for Automobile Structure Uses)

SPFH490SPFH540SPFH590

SPFH490SPFH540SPFH590

고압가스 용기용 강대

(Steel Sheets, Plates and Strip for Gas Cylinders)

SG255SG295SG325*SG365*

SG255SG295SG325*SG365*

A442A515A516

선체구조용 연강재

(Ordinary Strenght hull Structural Steel)

AB

AB

AB

선체구조용 고장력강재

(Higher Strenght hull Structural Steel)

AH32AH36

AH32AH36

A32/AH32A36/AH3

3) Chemical Composition 화학 성분



62

열연코일 (H

ot Rolled Coil)

63


열연코일 (H

ot Rolled Coil)

규 격


C Si Mn P S

STKT540 ≤ 0.23 ≤ 0.55 ≤0.15 ≤ 0.040 ≤0.040

STKT590* ≤ 0.12 ≤ 0.40 ≤ 2.00 ≤ 0.030 ≤ 0.030

STB340* ≤0.18

≤ 0.35

0.30~0.60

≤ 0.035 —STB410* ≤0.32 0.30~0.80

STB510* ≤0.25 1.00~1.50

S10C 0.08~0.13 0.15~0.35 0.30~0.60 ≤0.030 ≤0.035

S12C 0.10~0.15 0.15~0.35 0.30~0.60 ≤0.030 ≤0.035

S17C 0.15~0.20 0.15~0.35 0.30~0.60 ≤0.030 ≤0.035

S30C 0.27~0.33 0.15~0.35 0.60~0.90 ≤0.030 ≤0.035

S35C 0.32~0.38 0.15~0.35 0.60~0.90 ≤0.030 ≤0.035

S45C 0.42~0.48 0.15~0.35 0.60~0.90 ≤0.030 ≤0.035

SAPH310

— — — ≤0.040 ≤0.040SAPH370

SAPH400

SAPH440

SG325*≤0.20

≤0.55 ≤1.50≤0.040 ≤0.04

SG365* ≤0.55 ≤1.50

규 격


C Si Mn P S

API J55 — — — ≤ 0.030 ≤ 0.030

API 5LB S ≤0.28

—≤ 1.20 ≤ 0.030 ≤0.030

W ≤0.26 ≤ 1.20 ≤ 0.030 ≤0.030

API X42 S ≤0.28

—≤ 1.30 ≤ 0.030 ≤0.030

W ≤0.26 ≤1.30 ≤ 0.030 ≤0.030

API X46 S ≤0.28

—≤1.40 ≤ 0.030 ≤0.030

W ≤0.26 ≤ 1.40 ≤ 0.030 ≤0.030

API X52 S ≤0.28

—≤1.40 ≤0.030 ≤0.030

W ≤0.26 ≤1.40 ≤0.030 ≤0.030

API X56 S ≤0.28

—≤1.40 ≤0.030 ≤0.030

W ≤0.26 ≤1.40 ≤ 0.030 ≤0.030

API X60 S ≤ 0.28

—≤1.40 ≤0.030 ≤0.030

W ≤ 0.26 ≤1.40 ≤0.030 ≤0.030

API X65 S ≤ 0.28

—≤1.40 ≤0.030 ≤0.030

W ≤0.26 ≤1.45 ≤0.030 ≤0.030

API X70 S ≤0.28

—≤1.40 ≤0.030 ≤0.030

W ≤0.26 ≤1.65 ≤0.030 ≤0.030

SAE1006 ≤0.08 — ≤0.45 ≤0.040 ≤0.050

SAE1008 ≤0.10 — ≤0.50 ≤0.040 ≤0.050

SAE1010 0.08~0.13 — 0.30~0.60 ≤0.040 ≤0.050

SAE1012 0.10~0.15 — 0.30~0.60 ≤0.040 ≤0.050

SAE1017 0.14~0.20 — 0.30~0.60 ≤0.040 ≤0.050

SAE1022 0.17~0.23 — 0.70~1.00 ≤0.040 ≤0.050

SAE1030 0.27~0.34 — 0.60~0.90 ≤0.040 ≤0.050

SAE1035 0.31~0.38 — 0.60~0.90 ≤0.040 ≤0.050

SAE1045 0.42~0.50 — 0.60~0.90 ≤0.040 ≤0.050

S:SeamlessPiPe,W:WeldedPipe(PSL1기준,PSL2가능)


64

열연코일 (H

ot Rolled Coil)

65


열연코일 (H

ot Rolled Coil)

규 격

Designation C Si Mn P S

화학성분(wt%) Chemical Composition

SPA-H ≤0.12 0.25-0.75 0.20-0.50 0.25-0.60 0.30-1.25 ≤0.65 0.070-0.150 ≤0.040

규 격

Designation C Si Mn Cu Cr Ni P S

화학성분(wt%) Chemical Composition

A ≤0.21 ≤0.50 ≤2.5×C함량

B ≤0.21 ≤0.35 ≤0.80 ≤0.350 ≤0.350

D ≤0.21 ≥0.10,≤0.35 ≤0.60 ≤0.035 ≤0.035

E ≤0.18 ≥0.10,≤0.35 ≤0.70 ≤0.035 ≤0.035

AH32 ≤0.18 ≤0.50 ≤0.90

AH36 ≤0.18 ≤0.50 ≤0.90

DH32 ≤0.18 ≥0.10,≤ 0.50 ≥0.90≤ 1.60 ≤ 0.035 ≤ 0.035

DH36 ≤0.18 ≥0.10,≤ 0.50 ≥0.90≤ 1.60 ≤ 0.035 ≤ 0.025

EH32 ≤0.18 ≥0.10,≤ 0.50 ≥0.90≤ 1.60 ≤ 0.035 ≤ 0.035

EH36 ≤0.18 ≥0.10,≤ 0.50 ≥0.90≤ 1.60 ≤ 0.035 ≤ 0.035

FH32 ≤0.16 ≥0.10,≤ 0.50 ≥0.90≤ 1.60 ≤ 0.025 ≤ 0.025

FH36 ≤0.16 ≥0.10,≤ 0.50 ≥0.90≤ 1.60 ≤ 0.025 ≤ 0.025

4) Mechanical Properties 기계적 성질

SPHC ≥270 ≥27 ≥29 ≥29 ≥29 ≥31 ≥31 180° 밀착

Tx0.5 Flatonitself

SPHD

≥270 ≥30 ≥32 ≥33 ≥35 ≥37 ≥39

_ _ _

SPHE ≥270 ≥31 ≥33 ≥35 ≥37 ≥39 ≥41

규 격

Designation

인장강도MPa

TensileStrength ＜ 1.6 1.6 ~ 2.0 2.0 ~ 2.5 2.5 ~ 3.2 3.2 ~ 4.0 ≥ 4.0

연신율(%) elongation

SS330 330~430 ≥26 ≥21 180° Tx0.5

SS400 400~510 ≥21 ≥17 180° Tx1.5

SS490 490~610 ≥19 ≥15 180° Tx2.0

SS540 ≥540 ≥16 ≥13 180° Tx2.0

SM400A 400~510

SM400B 400~510 ≥23 ≥18 _ _

SM400C 400~510

SM490A 490~610

SM490B 490~610 ≥22 ≥17 _ _

SM490C 490~610

SM490YA 490~610

≥19 ≥15 _ _

SM490YB 490~610

SM520B 520~640

≥19 ≥15 _ _

SM520C 520~640

규 격

Designation

인장강도

MPaTensile Strength ≤ 5.0 5.0 ~ 16.0

연신율(%) elongation 굽힘시험 Bending test

굽힘각도 Bending Angle

안쪽반지름

Inside Radius

굽힘시험 Bending Test


안쪽반지름 Inside Radius ＜ 3.2 ≥ 3.2

66

열연코일 (H

ot Rolled Coil)

67


열연코일 (H

ot Rolled Coil)

SPA-H ≥490 ≥22 ≥15 180° Tx0.5 Tx1.5

규 격

Designation

인장강도

MPaTensile

Strength ≤ 6.0 ≥ 6.0

연신율(%) elongation 굽힘시험 Bending Test


안쪽반지름 Inside Radius ≤ 6.0 ≥ 6.0

SPHT1 ≥270 ≥30 ≥32 ≥35 ≥37 180° 밀착

Tx0.5 Flatonitself

SPHT2 ≥340 ≥25 ≥27 ≥30 ≥32 180° Tx1.0 Tx1.5

SPHT3 ≥410 ≥20 ≥22 ≥25 ≥27 180° Tx1.5 Tx2.0

SPHT4 ≥490 ≥15 ≥18 ≥20 ≥22 180° Tx1.5 Tx2.0

규 격

Designation

인장강도

MPaTensile

Strength ＜ 1.6 1.6 ~ 3.0 3.0 ~ 6.0 6.0~13.0



안쪽반지름 Inside Radius ≤ 3.0 ≥ 3.2

STK290 ≥290 ≥30 ≥25 90° 6D

STK400 ≥400 ≥23 ≥18 90° 6D

STK490 ≥490 ≥23 ≥18 90° 6D

STK500 ≥500 ≥20 ≥16 90° 6D

STK540 ≥540 ≥20 ≥16 90° 6D

STKM11A ≥290 ≥35 ≥30 180° 4D

STKM12A ≥340 ≥35 ≥30 90° 6D

STKM13A* ≥370 ≥30 ≥25 90° 6D

STKM13B* ≥440 ≥20 ≥15 90° 6D

STKT540 ≥540 ≥20 ≥16_

STKT590* 590~740 ≥20 ≥16

규 격

Designation

인장강도

MPaTensile

Strength 종방향 Longitudinal Direction 횡방향 Cross Direction



안쪽반지름

Inside Radius

STB340* ≥340 ≥35

STB410* ≥410 ≥25 _ _

STB510* ≥340 ≥25

규 격

Designation

인장강도MPa

TensileStrength

연신율(%) elongation굽힘시험 Bending Test





68

열연코일 (H

ot Rolled Coil)

69


열연코일 (H

ot Rolled Coil)

SG255 * ≥400 ≥28

SG295 * ≥440 ≥26_

SG325 * ≥490 ≥22

SG365 * ≥540 ≥20

규 격

Designation

인장강도

MPaTensile

Strength 종방향 Longitudinal Direction 횡방향 Cross Direction



안쪽반지름 Inside Radius

SPFH490 ≥490 ≥22 ≥23 ≥24 ≥25 180° Tx0.5 Tx1.0

SPFH540 ≥540 ≥21 ≥22 ≥23 ≥24 180° Tx1.0 Tx1.5

SPFH590 ≥590 ≥19 ≥20 ≥21 ≥22 180° Tx1.5 Tx1.5

규 격

Designation

인장강도

MPaTensile Strength 1.6 ~ 2.0 2.0 ~ 2.5 2.5 ~ 3.25 3.25 ~ 6.0

연신율(%) elongation 굽힘시험 Bending Test굽힘각도

Bending Angle안쪽반지름 Inside Radius

＜ 3.25 ≥ 3.25

180° Tx1.0

180°

180° Tx1.5

180°

A ≥400,≤520 ≥22_

_ _

B ≥400,≤520 ≥22 0° 27 20

D ≥400,≤520 ≥22 -20° 27 20

E ≥400,≤520 ≥22 -40° 27 20

AH32 ≥400,≤570 ≥22 0° 31 22

AH36 ≥400,≤620 ≥21 0° 34 24

DH32 ≥430,≤570 ≥22 -20° 31 22

DH36 ≥490,≤620 ≥21 -20° 34 24

EH32 ≥430,≤570 ≥22 -40° 31 22

EH36 ≥490,≤620 ≥21 -40° 34 24

FH32 ≥430,≤570 ≥22 -60° 31 22

FH36 ≥490,≤620 ≥21 -60° 34 24

규 격

Designation

인장강도

MPaTensile Strength

연신율(%) elongation충격시험 Charpy Impact Test

시험온도(°C) Test Temperature

흡수에너지 J energy AbsorptionL T

API J55 379~552 ≥517 — —

API 5LB ≥ 245 ≥415

API X42 ≥ 290 ≥415

API X46 ≥ 320 ≥435

API X52 ≥ 360 ≥460

API X56 ≥ 390 ≥490

API X60 ≥ 415 ≥520

API X65 ≥ 450 ≥535

API X70 ≥ 485 ≥570

규 격

Designation

인장강도MPa

Tensile Strength

항복강도MPa

Yield Strength연신율(%) elongation



안쪽반지름 Inside Radius

SAPH310 ≥310 ≥33 ≥34 ≥36 ≥38 ≥40 ≥26 180° 밀착

Tx1.0 Flatonitself

SAPH370 ≥370 ≥32 ≥33 ≥35 ≥36 ≥37 ≥25 180°

Tx0.5

Tx1.0

SAPH400 ≥400 ≥31 ≥32 ≥34 ≥35 ≥36 ≥24 180°

Tx1.0

Tx1.0

SAPH440 ≥440 ≥29 ≥30 ≥32 ≥33 ≥34 ≥22 180°

Tx1.0

Tx1.5

규 격

Designation

인장강도MPa

TensileStrength 1.6 ~ 2.0 2.0 ~ 2.5 2.5 ~3.15 3.15 ~ 4.0 4.0 ~ 6.3 ≥ 6.3




e=625,000A0.2

U0.9

e:최소연신율

A:시험편단면적

U:최소인장강도


(PSL1기준,PSL2가능)

70

열연코일 (H

ot Rolled Coil)

71


열연코일 (H

ot Rolled Coil)

(2) B HR Mill(HSM) B열연사전 협의가 필요

Priordiscussionisnecessary

사전 협의가 필요


5) Available Sizes 공급가능규격

(1) A HR Mill(CSP) A열연

72

열연코일 (H

ot Rolled Coil)

73


열연코일 (H

ot Rolled Coil)

(3) C HR Mill(HSM) C열연사전 협의가 필요


74

열연코일 (H

ot Rolled Coil)

75


열연코일 (H

ot Rolled Coil)

Packing

6) Packing & Marking 포장

Marking

HFL SPM

HOT ROLLED STEEL COIL HYUNDAI STEELDangjin, Chung-namJIS G3131 SPHC3.05×1224×CH 05108NET. WT 16930GR. WT 16930KGMADE IN KOREA

3.05CUSTOMER

HYUNDAI STEEL COMPANYSPEC

JIS G3131 SPHC

SIZE 3.051224PROD. NO.

HS03221CONT. NO.

P060500017

HEAT. NO. GRADE

H05108 1

NET WT.

16930KG 37324LBS

GR. WT.

16930KG

DATE

2008. 03. 26

HR

LABeL SHIPPING MARK

HR COIL

Made In Korea

76 77


후판 (Steel Plate)


19. Steel Plate 후판

구 분

HR PLATE (현황) PTE (AS ROLLED)

PTE (2010년 예정)연 강

(A, B)고장력강

(AH 32/36)

연 강 고장력강

A, B D AH32, DH36 DH32, DH36

KR Max.15.8 Max.15.8 Max.50 Max.35 Max.35 Max.20

◆ CR재

- A, B, D - AH32, AH36, DH32, DH36 - Max. 50

◆ TMCP재

- E - AH32, AH36, DH32, DH36 EH32, EH36 - Max. 60

◆ 열처리재(Normalizing) - A, B, D, E - AH32, AH36, DH32, DH36 EH32, EH36 - Max.80

GL Max.15.8 Max.15.8 Max.50 Max.35 Max.35 Max.20

NK Max.15.8 Max.15.8 Max.50 Max.35 Max.35 Max.20

DNV Max.15.8 Max.15.8A:Max.50B: -

- Max.35 -

ABS Max.16.0 Max.16.0 Max.50 Max.35 Max.35 Max.20

LRA:Max.15.8B:Max. 8.0

Max.15.8 Max.50 Max.35 Max.35 Max.20

BV Max.15.8 Max.15.8 Max.50 Max.35 Max.35 Max.20

RINA Max.15.8 Max.15.8 Max.50 Max.35 Max.35 Max.20

CCS - - Max.50 Max.35 Max.35 Max.20

RS - - Max.50 Max.35 Max.35 Max.20

1) Approved Specifications 규격인가

(1) 선급 협회 인가 현황 및 예정 사항 치수단위(Unit) : mm

2) Production Range 생산가능 범위

두 께(mm) Thickness

폭(mm) Width

길이(mm) Length 비 고

6 ~ 200 900 ~ 4,800 3,000 ~ 25,000 Above thickness 80mm,not subject to the quality guarantee

(2) KS, JIS 인가 현황 및 예정 사항

규 격 Hot Rolled Coil (현황) Plate (현황)

PLATE (2010년 예정)종류 및 기호 종류 및 기호

KS

D 3503일반구조용 압연강재

SS400 SS400, SS490, SS540

D 3515용접구조용 압연강재

SM400B, SM490A,SM490B, SM490YB,SM520B, SM520C

SM400A, SM400B, SM400C,SM490A, SM490B, SM490C,

SM490YA, SM490YB,SM520B, SM520C

SM570

D 3555강관용 열간압연 탄소강대

HRS1, HRS2

D 3501열간압연 연강판 및 강대

SPHC

D 3702기계구조용 탄소 강재

SM45C ~ SM58C

D 3529용접구조용 내후성 열간 압연 강재

SMA490BP

D 3868교량구조용 압연강재

HSB500, HSB500L/W,HSB600, HSB600L/W

JIS

G 3101일반구조용 압연강재

전 규격

G 3106용접구조용 압연강재

전 규격

G 3131열간압연 연강판 및 강대

전 규격

G 3118중, 상온 압력용기용 탄소강판

전 규격

G 3103보일러 및 압력용기용 탄소강 및 몰리브덴강

전 규격

G 3136건축구조용 압연강재

전 규격

G 4051기계구조용 탄소강재

전 규격

78 79




구 분2010년 2011년

2012년 2013년 이후상반기 하반기 상반기 하반기

일반용

일반구조A36

◆A283-B,C* S355JR

•A572-65

용접구조•A572-42•A573-70

A572-50•A572-60•A633-C,D

A709-36A709-50

A678-C

압력용기

보일러용

A515-60A285-CA515-65A515-70

A204-AA204-B

*A537-C2*A537-C3

중상온용A516-60A516-65A516-70

A516-60-NA516-65-NA516-70-N

A537-C1

합금강A387-11A387-22

A387-2A387-12A387-21A387-5

*A302-A,B *A302-C,D

*A533-A*A533-B*A533-C*A533-D

저온용

*A203-A*A203-B*A662-A*A203-D*A203-E

*A662-B*A662-C

*A535 *A553

구 분2010년 2011년

2012년 2013년 이후상반기 하반기 상반기 하반기

조선용

ARA/B/D

AH/DH32AH/DH36

TMCPAH/DH32-TMAH/DH36-TMEH32/36-TM

AH/DH40-TMEH40-TM

열처리

D/E-NAH/DH32-NAH/DH36-NEH32/36-N

AH/DH40-NEH40-N

저온용 FH32/36-TMFH40-TM

해양구조 2H-42, 502W-42, 50, 60

구조용

일반구조SS330SS400SS490

SS540

용접구조

SM400SM490

SM490YA/YBSM520B

SM570-TM SMA400ASMA490A

(SM570-Q)SMA570-Q

건축구조 SN400ASN490B

기계구조 S45C~S55C S35C~S43C S22C~S33C S10C~S20C

압력용기

보일러용

SPPV235SPPV315SPPV355

SB410SB450SB480

(SPPV-355-N) SM450MSB480M

*SPPV410*SPPV450*SPPV490

중상온용SGV410SGV450SGV480

SEV245SEV295SEV345

합금강 SCMV3SCMV4

SCMV1/SCMV2SCMV5/SCMV6

*SBV1A/1B *SBV2/SBV3

*SQV1A/1B *SQV2A/2B *SQV3A/3B

저온용

*SL2N255 *SLA1 235A

*SL3N255*SL3N275

*SLA1 325A*SLA1 360*SL3N440*SL5N590*SL9N520*SL9N590

APIAR A, B

X42, X46, X52

TMCP X56, X60X65, X70 X80 X100

(1) KS/JIS (2) ASTM

3) Product Development 강종 양산계획

*color 생산 미정

* : S355JR은 EN 규격임

•: 양산계획없음

◆: 수요발생 시

80 81




규 격

Desingnation두 께(mm)Thickness

Chemical Composition (WT%) 화학성분(%)

C Si Mn P S MoCeq

t ≤ 50 50 < t ≤ 75

SPPV235t ≤ 100 ≤ 0.18

≤0.35 ≤ 1.40 ≤ 0.030 ≤ 0.030 - - -t > 100 ≤ 0.2

SPPV315 - ≤ 0.18 ≤0.55 ≤ 1.50 ≤ 0.030 ≤ 0.030 - - -

SPPV355 - ≤ 0.2 ≤0.55 ≤ 1.60 ≤ 0.030 ≤ 0.030 - - -

SPPV410 - ≤ 0.18 ≤0.55 ≤ 1.60 ≤ 0.030 ≤ 0.030 - - -

SPPV450 - ≤ 0.18 ≤0.75 ≤ 1.60 ≤ 0.030 ≤ 0.030 - 0.44 Max. 0.46 Max.

SPPV490 - ≤ 0.18 ≤0.75 ≤ 1.60 ≤ 0.030 ≤ 0.030 - 0.45 Max. 0.47 Max.

규격

Desingnation


C Si Mn P S Cu Cr Ni Mo S.Al Nb V Ti N

A ≤ 0.21 ≤ 0.50 ≥ 2.5XC ≤ 0.035 ≤ 0.035 -

B ≤ 0.21 ≤ 0.35 ≥ 0.8 ≤ 0.035 ≤ 0.035 -

D ≤ 0.21 ≤ 0.35 ≥ 0.6 ≤ 0.035 ≤ 0.035 -≥ 0.015(25mm<t)

-

E ≤ 0.18 ≤ 0.35 ≥ 0.7 ≤ 0.035 ≤ 0.035 - ≥ 0.015 -

AH32

≤ 0.18 ≤ 0.500.90~1.60

≤ 0.035 ≤ 0.035 ≤ 0.35 ≤ 0.20 ≤ 0.40 ≤ 0.08 ≥ 0.0150.02~0.05

0.05~0.10

≤ 0.02 -DH32

EH32

FH32 ≤ 0.16 ≤ 0.500.90~1.60

≤ 0.025 ≤ 0.025 ≤ 0.35 ≤ 0.20 ≤ 0.80 ≤ 0.08 ≥ 0.0150.02~0.05

0.05~0.10

≤ 0.02 ≤ 0.009

AH36

≤ 0.18 ≤ 0.500.90~1.60

≤ 0.035 ≤ 0.035 ≤ 0.35 ≤ 0.20 ≤ 0.40 ≤ 0.08 ≥ 0.0150.02~0.05

0.05~0.10

≤ 0.02 -DH36

EH36

FH36 ≤ 0.16 ≤ 0.500.90~1.60

≤ 0.025 ≤ 0.025 ≤ 0.35 ≤ 0.20 ≤ 0.80 ≤ 0.08 ≥ 0.0150.02~0.05

0.05~0.10

≤ 0.02 ≤ 0.009

AH40

≤ 0.18 ≤ 0.500.90~1.60

≤ 0.035 ≤ 0.035 ≤ 0.35 ≤ 0.20 ≤ 0.40 ≤ 0.08 ≥ 0.0150.02~0.05

0.05~0.10

≤ 0.02 -DH40

EH40

FH40 ≤ 0.16 ≤ 0.500.90~1.60

≤ 0.025 ≤ 0.025 ≤ 0.35 ≤ 0.20 ≤ 0.80 ≤ 0.08 ≥ 0.0150.02~0.05

0.05~0.10

≤ 0.02 ≤ 0.009

(1) Steel Plates for Shipbuilding 선체구조용 (2) Steel Plates for Boilers & Pressure Vessels 보일러 및 압력용기용

KS/JIS (SPPV) 압력용기용 강재

규 격



C Si Mn P S MoCeq

t ≤ 50 50 < t ≤ 75

SB410

t ≤ 25 ≤ 0.24

0.15~0.40 ≤ 0.90 ≤ 0.030 ≤ 0.030 - - -25 < t ≤ 50 ≤ 0.27

50 < t ≤ 200 ≤ 0.30

SB450

t ≤ 25 ≤ 0.28

0.15~0.40 ≤ 0.90 ≤ 0.030 ≤ 0.030 - - -25 < t ≤ 50 ≤ 0.31

50 < t ≤ 200 ≤ 0.33

SB480

t ≤ 25 ≤ 0.31

0.15~0.40 ≤ 1.20 ≤ 0.030 ≤ 0.030 - - -25 < t ≤ 50 ≤ 0.33

50 < t ≤ 200 ≤ 0.35

SB450M

t ≤ 25 ≤ 0.18

0.15~0.40 ≤ 0.90 ≤ 0.030 ≤ 0.030 0.45~0.60 - -25 < t ≤ 50 ≤ 0.21

50 < t ≤ 100 ≤ 0.23

100 < t ≤ 200 ≤ 0.25

SB480M

t ≤ 25 ≤ 0.20

0.15~0.40 ≤ 0.90 ≤ 0.030 ≤ 0.030 0.45~0.60 - -25 < t ≤ 50 ≤ 0.23

50 < t ≤ 100 ≤ 0.25

100 < t ≤ 200 ≤ 0.27

KS/JIS (SB) 보일러 및 압력용기용 탄소강 및 Mo 강 강판

4) Chemical Composition 화학 성분

a : A, B, D, E Grade 의 경우 C+Mn/6 의 함량이 0.40% 를 넘지 않음.

b : Al, Nb, V, 또는 기타 세립화 원소를 단독 또는 조합으로 함유시켜야 한다. 다만 단독으로 함유시키는 경우에는 세립화 원소성분의 하한 규정을 적용하지만 조합하여 함유시키는 경우에는 각각의 세립화 원소성분의 하한 규정은 적용하지 않음.

82 83




규 격



C Si Mn P S Ni Mo

SBV1A

t ≤ 25 ≤ 0.20

0.15~0.40 0.95~1.30 ≤ 0.030 ≤ 0.030 - 0.45~0.6025 < t ≤ 50 ≤ 0.23

50 < t ≤ 150 ≤ 0.25

SBV1B

t ≤ 25 ≤ 0.20

0.15~0.40 1.15~1.50 ≤ 0.030 ≤ 0.030 - 0.45~0.6025 < t ≤ 50 ≤ 0.23

50 < t ≤ 150 ≤ 0.25

SBV2

t ≤ 25 ≤ 0.20

0.15~0.40 1.15~1.50 ≤ 0.030 ≤ 0.030 0.40~0.70 0.45~0.6025 < t ≤ 50 ≤ 0.23

50 < t ≤ 150 ≤ 0.25

SBV3

t ≤ 25 ≤ 0.20

0.15~0.40 1.15~1.50 ≤ 0.030 ≤ 0.030 0.70~1.00 0.45~0.6025 < t ≤ 50 ≤ 0.23

50 < t ≤ 150 ≤ 0.25

KS/JIS (SBV) 보일러 및 압력용기용 Mn-Mo 강 및 Mn-Mo-Ni 강 강판

규 격

DesingnationChemical Composition (WT%) 화학성분(%)

C Si Mn P S Ni Mo

SQV1A ≤ 0.25 0.15~0.40 1.15 ~ 1.50 ≤ 0.030 ≤ 0.030 - 0.45 ~ 0.60

SQV1B ≤ 0.25 0.15~0.40 1.15 ~ 1.50 ≤ 0.030 ≤ 0.030 - 0.45 ~ 0.60

SQV2A ≤ 0.25 0.15~0.40 1.15 ~ 1.50 ≤ 0.030 ≤ 0.030 0.40 ~ 0.70 0.45 ~ 0.60

SQV2B ≤ 0.25 0.15~0.40 1.15 ~ 1.50 ≤ 0.030 ≤ 0.030 0.40 ~ 0.70 0.45 ~ 0.60

SQV3A ≤ 0.25 0.15~0.40 1.15 ~ 1.50 ≤ 0.030 ≤ 0.030 0.70~1.00 0.45 ~ 0.60

SQV3B ≤ 0.25 0.15~0.40 1.15 ~ 1.50 ≤ 0.030 ≤ 0.030 0.70~1.00 0.45 ~ 0.60

KSJIS (SQV) 압력용기용 조질형 Mn-Mo 강 및 Mn-Mo-Ni 강 강판

규 격


C Si Mn P S

SLA1 235A,B ≤ 0.15 0.15~0.30 0.70~150 ≤ 0.035 ≤ 0.035

SLA1 325A,B ≤ 0.16 0.15~0.55 0.80~160 ≤ 0.035 ≤ 0.035

SLA1 360 ≤ 0.18 0.15~0.55 0.80~160 ≤ 0.035 ≤ 0.035

KS/JIS (SLA1) 저온 압력용기용 탄소강 강판

KS/JIS (SGV) 중상온 압력용기용 탄소강 강판

규 격



C Si Mn P S MoCeq

t ≤ 50 50 < t ≤ 75

SGV410

t ≤ 12.5 ≤ 0.21

0.15~0.40 0.85~1.20 ≤ 0.030 ≤ 0.030 - - -12.5 < t ≤ 50 ≤ 0.23

50 < t ≤ 100 ≤ 0.25

100 < t ≤ 200 ≤ 0.27

SGV450

t ≤ 12.5 ≤ 0.24

0.15~0.40 0.85~1.20 ≤ 0.030 ≤ 0.030 - - -12.5 < t ≤ 50 ≤ 0.26

50 < t ≤ 100 ≤ 0.28

100 < t ≤ 200 ≤ 0.29

SGV480

t ≤ 12.5 ≤ 0.27

0.15~0.40 0.85~1.20 ≤ 0.030 ≤ 0.030 - - -12.5 < t ≤ 50 ≤ 0.28

50 < t ≤ 100 ≤ 0.30

100 < t ≤ 200 ≤ 0.31

KS/JIS (SEV) 중상온 압력용기용 고강도 강판

규 격

Desingnation


C Si Mn P S Cu Mo Nb VCeq

t ≤ 75 75 < t ≤ 150

SEV245 ≤ 0.20 0.15~0.60 0.80~1.60 ≤ 0.035 ≤ 0.035 ≤ 0.35 ≤ 0.35 ≤ 0.05 ≤ 0.10 ≤ 0.53 ≤ 0.60

SEV295 ≤ 0.19 0.15~0.60 0.80~1.60 ≤ 0.035 ≤ 0.035 ≤ 0.35 0.10~0.40 ≤ 0.05 ≤ 0.10 ≤ 0.56 ≤ 0.61

SEV345 ≤ 0.19 0.15~0.60 0.80~1.70 ≤ 0.035 ≤ 0.035 ≤ 0.35 0.15~0.50 ≤ 0.05 ≤ 0.10 ≤ 0.60 ≤ 0.62

KS/JIS (SCMV) 보일러 및 압력용기용 Cr-Mo강 강판

규 격


C Si Mn P S Cr Mo

SCMV 1 ≤ 0.21 ≤ 0.45 0.51 ~ 0.84 ≤ 0.030 ≤ 0.030 0.46 ~ 0.85 0.40 ~ 0.65

SCMV 2 ≤ 0.17 ≤ 0.45 0.36 ~ 0.69 ≤ 0.030 ≤ 0.030 0.74 ~ 1.21 0.40 ~ 0.65

SCMV 3 ≤ 0.17 0.44~0.86 0.36 ~ 0.69 ≤ 0.030 ≤ 0.030 0.94 ~ 1.56 0.40 ~ 0.70

SCMV 4 ≤ 0.17 ≤ 0.50 0.27 ~ 0.63 ≤ 0.030 ≤ 0.030 1.88 ~ 2.62 0.85 ~ 1.15

SCMV 5 ≤ 0.17 ≤ 0.50 0.27 ~ 0.63 ≤ 0.030 ≤ 0.030 2.63 ~ 3.37 0.85 ~ 1.15

SCMV 6 ≤ 0.15 ≤ 0.55 0.27 ~ 0.63 ≤ 0.030 ≤ 0.030 3.90 ~ 6.10 0.40 ~ 0.70

84 85




규 격



C Si Mn P S Cu Ni Cr Mo

A537 Class1t ≤ 40

≤ 0.24 0.15~0.500.70~1.35

≤ 0.035 ≤ 0.035 ≤ 0.35 ≤ 0.25 ≤ 0.25 ≤ 0.08t > 40 1.00~1.60

A537 Class2t ≤ 40

≤ 0.24 0.15~0.500.70~1.35

≤ 0.035 ≤ 0.035 ≤ 0.35 ≤ 0.25 ≤ 0.25 ≤ 0.08t > 40 1.00~1.60

A537 Class3t ≤ 40

≤ 0.24 0.15~0.500.70~1.35

≤ 0.035 ≤ 0.035 ≤ 0.35 ≤ 0.25 ≤ 0.25 ≤ 0.08t > 40 1.00~1.60

규 격



C Si Mn P S

A516-55

t ≤ 12.5 ≤ 0.18

0.15~0.40 0.60~0.90 ≤ 0.035 ≤ 0.035

12.5 < t ≤ 50 ≤ 0.20

50 < t ≤ 100 ≤ 0.22

100 < t ≤ 200 ≤ 0.24

t > 200 ≤ 0.26

A516-60

t ≤ 12.5 ≤ 0.21

0.15~0.40 0.60~0.90 ≤ 0.035 ≤ 0.035

12.5 < t ≤ 50 ≤ 0.23

50 < t ≤ 100 ≤ 0.25

100 < t ≤ 200 ≤ 0.27

t > 200 ≤ 0.27

A516-65

t ≤ 12.5 ≤ 0.24

0.15~0.40 0.85~1.20 ≤ 0.035 ≤ 0.035

12.5 < t ≤ 50 ≤ 0.26

50 < t ≤ 100 ≤ 0.28

100 < t ≤ 200 ≤ 0.29

t > 200 ≤ 0.29

A516-70

t ≤ 12.5 ≤ 0.27

0.15~0.40 0.85~1.20 ≤ 0.035 ≤ 0.035

12.5 < t ≤ 50 ≤ 0.28

50 < t ≤ 100 ≤ 0.30

100 < t ≤ 200 ≤ 0.31

t > 200 ≤ 0.31

ASTM A516 상온 및 저온용 탄소강판

ASTM A537 압력용기용 열처리 C-Mn-Si 강판

KS/JIS (SLXN) 저온 압력용기용 니켈 강판

규 격


C Si Mn P S Ni

SLN2N255 ≤ 0.17 ≤ 0.30 ≤ 0.70 ≤ 0.025 ≤ 0.025 2.10~2.50

SLN3N255 ≤ 0.15 ≤ 0.30 ≤ 0.70 ≤ 0.025 ≤ 0.025 3.25~3.75

SLN3N275 ≤ 0.17 ≤ 0.30 ≤ 0.70 ≤ 0.025 ≤ 0.025 3.25~3.75

SLN3N440 ≤ 0.15 ≤ 0.30 ≤ 0.70 ≤ 0.025 ≤ 0.025 3.25~3.75

SLN5N590 ≤ 0.13 ≤ 0.30 ≤ 1.50 ≤ 0.025 ≤ 0.025 4.75~6.00

SLN9N520 ≤ 0.12 ≤ 0.30 ≤ 0.90 ≤ 0.025 ≤ 0.025 8.50~9.50

SLN9N590 ≤ 0.12 ≤ 0.30 ≤ 0.90 ≤ 0.025 ≤ 0.025 8.50~9.50

ASTM A285 압력용기용 저, 중강도용 탄소강판

규 격


C Si Mn P S

A285-A ≤ 0.17 - ≤ 0.90 ≤ 0.035 ≤ 0.035

A285-B ≤ 0.22 - ≤ 0.90 ≤ 0.035 ≤ 0.035

A285-C ≤ 0.28 - ≤ 0.90 ≤ 0.035 ≤ 0.035

ASTM A515 중, 고온용 압력용기용 탄소강판

규 격



C Si Mn P S

A515-60

t ≤ 25 ≤ 0.24

0.15~0.40 ≤ 0.90 ≤ 0.035 ≤ 0.035

25 < t ≤ 50 ≤ 0.27

50 < t ≤ 100 ≤ 0.29

100 < t ≤ 200 ≤ 0.31

t > 200 ≤ 0.31

A515-65

t ≤ 25 ≤ 0.28

0.15~0.40 ≤ 0.90 ≤ 0.035 ≤ 0.035

25 < t ≤ 50 ≤ 0.31

50 < t ≤ 100 ≤ 0.33

100 < t ≤ 200 ≤ 0.33

t > 200 ≤ 0.33

A515-70

t ≤ 25 ≤ 0.31

0.15~0.40 ≤ 1.20 ≤ 0.035 ≤ 0.035

25 < t ≤ 50 ≤ 0.33

50 < t ≤ 100 ≤ 0.35

100 < t ≤ 200 ≤ 0.35

t > 200 ≤ 0.35

86 87




ASTM A302 압력용기용 Mn-Mo 강 및 Mn-Mo-Ni 강 강판

규 격

Desingnation


C Si Mn P S Mo Ni

A533 Grade A ≤ 0.25 0.15~0.40 1.15 ~ 1.50 ≤ 0.035 ≤ 0.035 0.45 ~ 0.60 -

A533 Grade B ≤ 0.25 0.15~0.40 1.15 ~ 1.50 ≤ 0.035 ≤ 0.035 0.45 ~ 0.60 0.40 ~ 0.70

A533 Grade C ≤ 0.25 0.15~0.40 1.15 ~ 1.50 ≤ 0.035 ≤ 0.035 0.45 ~ 0.60 0.70 ~ 1.00

A533 Grade D ≤ 0.25 0.15~0.40 1.15 ~ 1.50 ≤ 0.035 ≤ 0.035 0.45 ~ 0.60 0.20 ~ 0.40

ASTM A533 압력용기용 조질형 Mn-Mo 강 및 Mn-Mo-Ni 강 강판

규 격



C Si Mn P S Ni

A203 Grade At ≤ 50 ≤ 0.17

0.15~0.40 ≤ 0.70 ≤ 0.035 ≤ 0.035 2.10~2.5050 < t ≤ 100 ≤ 0.20 t > 100 ≤ 0.23

A203 Grade Bt ≤ 50 ≤ 0.21

0.15~0.40 ≤ 0.70 ≤ 0.035 ≤ 0.035 2.10~2.5050 < t ≤ 100 ≤ 0.24 t > 100 ≤ 0.25

A203 Grade Dt ≤ 50 ≤ 0.17

0.15~0.40 ≤ 0.70 ≤ 0.035 ≤ 0.035 3.25~3.7550 < t ≤ 100 ≤ 0.20 t > 100 -

A203 Grade Et ≤ 50 ≤ 0.20

0.15~0.40 ≤ 0.70 ≤ 0.035 ≤ 0.035 3.25~3.7550 < t ≤ 100 ≤ 0.23 t > 100 -

A203 Grade Ft ≤ 50 ≤ 0.20

0.15~0.40 ≤ 0.70 ≤ 0.035 ≤ 0.035 3.25~3.7550 < t ≤ 100 ≤ 0.23 t > 100 -

ASTM A203 압력용기용 Ni 강 강판

ASTM A204 압력용기용 Mo 합금강판

규 격



C Si Mn P S Mo

A204 Grade A

t ≤ 25 ≤ 0.18

0.15~0.40 ≤ 0.90 ≤ 0.035 ≤ 0.035 0.45~0.6025 < t ≤ 50 ≤ 0.21

50 < t ≤ 100 ≤ 0.23

t > 100 ≤ 0.25

A204 Grade B

t ≤ 25 ≤ 0.20

0.15~0.40 ≤ 0.90 ≤ 0.035 ≤ 0.035 0.45~0.6025 < t ≤ 50 ≤ 0.23

50 < t ≤ 100 ≤ 0.25

t > 100 ≤ 0.27

A204 Grade C

t ≤ 25 ≤ 0.23

0.15~0.40 ≤ 0.90 ≤ 0.035 ≤ 0.035 0.45~0.6025 < t ≤ 50 ≤ 0.26

50 < t ≤ 100 ≤ 0.28

t > 100 ≤ 0.28

ASTM A387 압력용기용 Cr-Mo강 강판

규격

Desingnation


C Si Mn P S Cr Mo Ni V Nb B N Al Ti Zr

A387-2 0.05~0.21

0.15~0.40

0.55~0.80

≤ 0.035 ≤ 0.035 0.50~0.80

0.45~0.60

- - - - - - - -

A387-12 0.05~0.17

0.15~0.40

0.40~0.65

≤ 0.035 ≤ 0.035 0.80~1.15

0.45~0.60

- - - - - - - -

A387-11 0.05~0.17

0.50-0.80

0.40~0.65

≤ 0.035 ≤ 0.035 1.00~1.50

0.45~0.65

- - - - - - - -

A387-22 0.05~0.15

≤ 0.50 0.30~0.60

≤ 0.035 ≤ 0.035 2.00~2.50

0.90~1.10

- - - - - - - -

A387-22L ≤ 0.10 ≤ 0.50 0.30~0.60

≤ 0.035 ≤ 0.035 2.00~2.50

0.90~1.10

- - - - - - - -

A387-21 0.05~0.15

≤ 0.50 0.30~0.60

≤ 0.035 ≤ 0.035 2.75~3.25

0.90~1.10

- - - - - - - -

A387-21L ≤ 0.10 ≤ 0.50 0.30~0.60

≤ 0.035 ≤ 0.035 2.75~3.25

0.90~1.10

- - - - - - - -

A387-5 ≤ 0.15 ≤ 0.50 0.30~0.60

≤ 0.035 ≤ 0.030 4.00~6.00

0.45~0.65

- - - - - - - -

A387-9 ≤ 0.15 ≤ 1.00 0.30~0.60

≤ 0.030 ≤ 0.030 8.00~10.00

0.90~1.10

- ≤ 0.04 - - - - - -

A387-91 0.08~0.12

0.20~0.50

0.30~0.60

≤ 0.020 ≤ 0.010 8.00~9.50

0.85~1.05

≤ 0.40 0.18~0.25

0.06~0.10

-0.030~0.070

≤ 0.02 ≤ 0.01 ≤ 0.01

규 격



C Si Mn P S Mo Ni

A302 Grade A

t ≤ 25 ≤ 0.20

0.15~0.40 0.95~1.30 ≤ 0.035 ≤ 0.035 0.45~0.60 -25 < t ≤ 50 ≤ 0.23

t > 50 ≤ 0.25

A302 Grade B

t ≤ 25 ≤ 0.20

0.15~0.40 1.15~1.50 ≤ 0.035 ≤ 0.035 0.45~0.60 -25 < t ≤ 50 ≤ 0.23

t > 50 ≤ 0.25

A302 Grade C

t ≤ 25 ≤ 0.20

0.15~0.40 1.15~1.50 ≤ 0.035 ≤ 0.035 0.45~0.60 0.40~0.7025 < t ≤ 50 ≤ 0.23

t > 50 ≤ 0.25

A302 Grade D

t ≤ 25 ≤ 0.20

0.15~0.40 1.15~1.50 ≤ 0.035 ≤ 0.035 0.45~0.60 0.70~1.0025 < t ≤ 50 ≤ 0.23

t > 50 ≤ 0.25

88 89




규 격

Desingnation(PSL 1)


C Mn P S V Nb Ti

API -AAPI -BAPI-X42API-X46API-X52API-X56API-X60API-X65API-X70

≤ 0.22≤ 0.26≤ 0.26≤ 0.26≤ 0.26≤ 0.26≤ 0.26≤ 0.26≤ 0.26

≤ 0.90≤ 1.20≤ 1.30≤ 1.40≤ 1.40≤ 1.40≤ 1.40≤ 1.45≤ 1.65

≤ 0.030≤ 0.030≤ 0.030≤ 0.030≤ 0.030≤ 0.030≤ 0.030≤ 0.030≤ 0.030

≤ 0.030≤ 0.030≤ 0.030≤ 0.030≤ 0.030≤ 0.030≤ 0.030≤ 0.030≤ 0.030

-

a,bbbbbccc

-

a,bbbbbccc

-

bbbbbccc

(3) Steel Plates for Line Pipes 송유관용

규 격

Desingnation

Chemical Composition (WT%) 화학성분(%) 탄소당량

열처리

C Si Mn P S Ni Cr Mo Cu Nb N Al Ti두께범위

in(mm) Ceq Pcm

API-2H-42 ≤ 0.18 0.15~0.40

0.90~1.35(a)

≤ 0.03 ≤ 0.01 - ≤ 0.012 0.02~0.05

-t≤2.5(63.5)t>2.5(63.5)

≤ 0.43≤ 0.45

- Nor.

API-2H-50 ≤ 0.18 0.15~0.40

1.15~1.60

≤ 0.03 ≤ 0.01 -0.01~0.05

≤ 0.012 0.02~0.05

-≤2(50.8)>2(50.8)

≤ 0.43≤ 0.45 Nor.

API-2W-42 ≤ 0.16 0.05~0.50

0.90~1.35(a)

≤ 0.03 ≤ 0.01 ≤ 0.75 ≤ 0.25 ≤ 0.08 ≤ 0.35 ≤ 0.03 ≤ 0.012 0.02~0.06

0.007~0.02

t≤1.5(38.1)1.5(38.1)<t≤3.5(88.9)3.8(88.9)<t

≤ 0.39≤ 0.41≤ 0.43

≤ 0.22≤ 0.23≤ 0.24

TMCP

API-2W-50 ≤ 0.16 0.05~0.50

0.90~1.60

≤ 0.03 ≤ 0.01 ≤ 0.75 ≤ 0.25 ≤ 0.08 ≤ 0.35 ≤ 0.03 ≤ 0.012 0.02~0.06

0.007~0.02

t≤1.5(38.1)1.5(38.1)<t≤3.5(88.9)3.8(88.9)<t

≤ 0.39≤ 0.41≤ 0.43

≤ 0.22≤ 0.23≤ 0.24

TMCP

API-2W-60 ≤ 0.16 0.05~0.50

0.90~1.60

≤ 0.03 ≤ 0.01 ≤ 1.0 ≤ 0.25 ≤ 0.15 ≤ 0.35 ≤ 0.03 ≤ 0.012 0.02~0.06

0.007~0.02

t≤1.5(38.1)1.5(38.1)<t

≤ 0.42≤ 0.45

≤ 0.23≤ 0.25 TMCP

a: 두께 1.5in 초과 시 Mn 함량 최대 1.60% 가능

* Ceq=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15* Pcm=C+Si/30+(Mn+Cu+Cr)/20+Ni/60+Mo/15+V/10+5B

(4) Steel Plates for Marine Structure 해양구조용ASTM A553 압력용기용 조절형 8.9% Ni강 강판

규 격

Desingnation


C Si Mn P S Ni

A553 Type Ⅰ ≤ 0.13 0.15~0.40 ≤ 0.90 ≤ 0.035 ≤ 0.035 8.50~9.50

A553 Type Ⅱ ≤ 0.13 0.15~0.40 ≤ 0.90 ≤ 0.035 ≤ 0.035 7.50~8.50

규 격

Desingnation(PSL 2)


C Mn P S V Nb Ti Other Ceq Pcm

API-BMAPI-X42MAPI-X46MAPI-X52MAPI-X56MAPI-X60MAPI-X65MAPI-X70MAPI-X80MAPI-X100M

≤ 0.22≤ 0.22≤ 0.22≤ 0.22≤ 0.22≤ 0.12≤ 0.12≤ 0.12≤ 0.12≤ 0.12

≤ 1.20≤ 1.30≤ 1.30≤ 1.40≤ 1.40≤ 1.60≤ 1.60≤ 1.70≤ 1.85≤ 2.10

≤ 0.025≤ 0.025≤ 0.025≤ 0.025≤ 0.025≤ 0.025≤ 0.025≤ 0.025≤ 0.025≤ 0.020

≤ 0.015≤ 0.015≤ 0.015≤ 0.015≤ 0.015≤ 0.015≤ 0.015≤ 0.015≤ 0.015≤ 0.010

≤ 0.05≤ 0.05≤ 0.05

bbccccc

≤ 0.05≤ 0.05≤ 0.05

bbccccc

≤ 0.04≤ 0.04≤ 0.04

bbccccc

a

a

a

a

a

d

d

d

e

e, f

≤ 0.43≤ 0.43≤ 0.43≤ 0.43≤ 0.43≤ 0.43≤ 0.43≤ 0.43≤ 0.43

-

≤ 0.25≤ 0.25≤ 0.25≤ 0.25≤ 0.25≤ 0.25≤ 0.25≤ 0.25≤ 0.25≤ 0.25

규 격


C Si Mn P S

SS330 - - - ≤ 0.05 ≤ 0.05

SS400 - - - ≤ 0.05 ≤ 0.05

SS490 - - - ≤ 0.05 ≤ 0.05

SS540 ≤ 0.30 - ≤ 1.60 ≤ 0.04 ≤ 0.04

(5) Structural Steel Plates 구조용

KS/JIS (SS) 일반구조용 강재

a: Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0.06%b: The sum of the nibium, vanadium and titanium concentrations shall be ≤ 0.15%c: Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%

a: Unless otherwise agreed, 0.50% max. for copper, 0.30% max. for nikel, 0.30% max. for chromium and 0.15% max. for molybdenum.b: The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%c: Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0.15%d: Unless otherwise agreed, 0.50% max. for copper, 0.50% max. for nikel, 0.50% max. for chromium and 0.50% max. for molybdenum.e: Unless otherwise agreed, 0.50% max. for copper, 1.00% max. for nikel, 0.50% max. for chromium and 0.50% max. for molybdenum.f : 0.004% max. for boron.

90 91




규 격

Desingnation기 호


C Si Mn P S Cu Cr Ni

SMA400 A,B,C1)W ≤ 0.18 0.15~0.65 ≤ 1.25 ≤ 0.035 ≤ 0.035 0.30~0.50 0.45~0.75 0.05~0.30

P ≤ 0.18 ≤ 0.55 ≤ 1.25 ≤ 0.035 ≤ 0.035 0.20~0.35 0.30~0.55 -

SMA490 A,B,C1)W ≤ 0.18 0.15~0.65 ≤ 1.40 ≤ 0.035 ≤ 0.035 0.30~0.50 0.45~0.75 0.05~0.30

P ≤ 0.18 ≤ 0.55 ≤ 1.40 ≤ 0.035 ≤ 0.035 0.20~0.35 0.30~0.55 -

SMA5701)W ≤ 0.18 0.15~0.65 ≤ 1.40 ≤ 0.035 ≤ 0.035 0.30~0.50 0.45~0.75 0.05~0.30

P ≤ 0.18 ≤ 0.55 ≤ 1.40 ≤ 0.035 ≤ 0.035 0.20~0.35 0.30~0.55 -

규 격


C Si Mn P S

SM10CSM12CSM15CSM17CSM20CSM22CSM25CSM28CSM30CSM33CSM35CSM38CSM40CSM43CSM45CSM48CSM50CSM53CSM55CSM58C

0.08~0.130.10~0.150.13~0.180.15~0.200.18~0.230.20~0.250.22~0.280.25~0.310.27~0.330.30~0.360.32~0.380.35~0.410.37~0.430.40~0.460.42~0.480.45~0.510.47~0.530.50~0.560.52~0.580.55~0.61

0.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.350.15~0.35

0.30~0.600.30~0.600.30~0.600.30~0.600.30~0.600.30~0.600.30~0.600.60~0.900.60~0.900.60~0.900.60~0.900.60~0.900.60~0.900.60~0.900.60~0.900.60~0.900.60~0.900.60~0.900.60~0.900.60~0.90

≤ 0.030 ≤ 0.035

KS/JIS (S-C) 기계구조용 강재

규 격



C Si Mn P S

SN400A 6 < t ≤ 100 ≤ 0.24 - - ≤ 0.05 ≤ 0.05

SN400B 6 ≤t ≤ 5050 < t ≤ 100

≤ 0.20≤ 0.22

≤ 0.35 0.6~1.40 ≤ 0.03 ≤ 0.015

SN400C 16 ≤t ≤ 5050 < t ≤ 100

≤ 0.20≤ 0.22

≤ 0.35 0.6~1.40 ≤ 0.02 ≤ 0.008

SN490B 6 ≤t ≤ 5050 < t ≤ 100

≤ 0.18≤ 0.20

≤ 0.55 ≤ 1.60 ≤ 0.03 ≤ 0.015

SN490C 16 ≤t ≤ 5050 < t ≤ 100

≤ 0.18≤ 0.20

≤ 0.55 ≤ 1.60 ≤ 0.02 ≤ 0.008

KS/JIS (SN) 건축구조용 강재

KS/JIS (SM) 용접구조용 강재

규 격



C Si Mn P S

SM400A t ≤ 5050 < t ≤ 200

≤ 0.23≤ 0.25

- ≤ 2.5xC ≤ 0.035 ≤ 0.035

SM400B t ≤ 5050 < t ≤ 200

≤ 0.20≤ 0.22

≤ 0.35 0.6~1.40 ≤ 0.035 ≤ 0.035

SM400C t ≤ 100 ≤ 0.18 ≤ 0.35 ≤ 1.40 ≤ 0.035 ≤ 0.035

SM490A t ≤ 5050 < t ≤ 200

≤ 0.20≤ 0.22

≤ 0.55 ≤ 1.60 ≤ 0.035 ≤ 0.035

SM490B t ≤ 5050 < t ≤ 200

≤ 0.18≤ 0.20

≤ 0.55 ≤ 1.60 ≤ 0.035 ≤ 0.035

SM490C t ≤ 100 ≤ 0.18 ≤ 0.55 ≤ 1.60 ≤ 0.035 ≤ 0.035

SM490YA,YB t ≤ 100 ≤ 0.20 ≤ 0.55 ≤ 1.60 ≤ 0.035 ≤ 0.035

SM520B,C t ≤ 100 ≤ 0.20 ≤ 0.55 ≤ 1.60 ≤ 0.035 ≤ 0.035

SM570 t ≤ 100 ≤ 0.18 ≤ 0.55 ≤ 1.60 ≤ 0.035 ≤ 0.035

KS/JIS (SMA) 용접구조용 내후성강재

1) 각 종류 모두 내후서에 유효한 원소인 Mo, Nb, Ti, V, Zr 등을 첨가하여도 좋다. 다만, 이들원소의 총계는 0.15% 를 넘지 않는것으로 한다.

92 93




규 격

Desingnation두 께 Inch(mm)

Thickness


C Si Mn P S

A709-36

t ≤ 0.75(20) ≤ 0.25 ≤ 0.40 -

≤ 0.04 ≤ 0.05

0.75(20) < t≤ 1.5(40)

≤ 0.25 ≤ 0.40 0.80~1.20

1.5(40) < t≤ 2.5(65)

≤ 0.26 0.15~0.40 0.80~1.20

2.5(65) < t≤ 4(100)

≤ 0.27 0.15~0.40 0.85~1.20

A709-50 t ≤ 1.5(40)1.5(40) < t

≤ 0.23≤ 0.40

0.15~0.40≤ 1.35 ≤ 0.04 ≤ 0.05

규 격


Thickness


C Si Mn P S

A572-42t ≤ 1.5(40)1.5(40) < t

≤ 0.21≤ 0.40

0.15~0.40

≤ 1.35≤ 1.601) ≤ 0.04 ≤ 0.05

A572-50t ≤ 1.5(40)1.5(40) < t

≤ 0.23≤ 0.40

0.15~0.40

≤ 1.35≤ 1.601) ≤ 0.04 ≤ 0.05

A572-60t ≤ 1.5(40)1.5(40) < t

≤ 0.26≤ 0.40

-

≤ 1.35≤ 1.601)

≤ 0.04 ≤ 0.05

A572-65t ≤ 1.5(40)1.5(40) < t

≤ 0.23≤ 0.40

-≤ 1.65 ≤ 0.04 ≤ 0.05

규 격


Thickness


C Si Mn P S

A283A t ≤ 1.5(40)1.5(40) < t

≤ 0.14≤ 0.40

0.15~0.40≤ 0.90 ≤ 0.035 ≤ 0.04

A283B t ≤ 1.5(40)1.5(40) < t

≤ 0.17≤ 0.40

0.15~0.40≤ 0.90 ≤ 0.035 ≤ 0.04

A283C t ≤ 1.5(40)1.5(40) < t

≤ 0.24≤ 0.40

0.15~0.40≤ 0.90 ≤ 0.035 ≤ 0.04

A283D t ≤ 1.5(40)1.5(40) < t

≤ 0.27≤ 0.40

0.15~0.40≤ 0.90 ≤ 0.035 ≤ 0.04

ASTM A709 교량용 강재ASTM A283 저, 중항장력 탄소강판

규 격


Thickness


C Si Mn P S N Cu

S235JRt ≤ 16

16 < t ≤ 4040 < t

≤ 0.17≤ 0.17≤ 0.20

- ≤ 1.40 ≤ 0.035 ≤ 0.035 ≤ 0.012 ≤ 0.55

S235J0t ≤ 16

16 < t ≤ 4040 < t

≤ 0.17≤ 0.17≤ 0.17

- ≤ 1.40 ≤ 0.030 ≤ 0.030 ≤ 0.012 ≤ 0.55

S235J2t ≤ 16

16 < t ≤ 4040 < t

≤ 0.17≤ 0.17≤ 0.17

- ≤ 1.40 ≤ 0.025 ≤ 0.025 - ≤ 0.55

S275JRt ≤ 16

16 < t ≤ 4040 < t

≤ 0.21≤ 0.21≤ 0.22

- ≤ 1.50 ≤ 0.035 ≤ 0.035 ≤ 0.012 ≤ 0.55

S275J0t ≤ 16

16 < t ≤ 4040 < t

≤ 0.18≤ 0.18≤ 0.18

- ≤ 1.50 ≤ 0.030 ≤ 0.030 ≤ 0.012 ≤ 0.55

S275J2t ≤ 16

16 < t ≤ 4040 < t

≤ 0.18≤ 0.18≤ 0.18

≤ 1.50 ≤ 0.025 ≤ 0.025 - ≤ 0.55

S355JRt ≤ 16

16 < t ≤ 4040 < t

≤ 0.24≤ 0.24≤ 0.24

≤ 0.55 ≤ 1.60 ≤ 0.035 ≤ 0.035 ≤ 0.012 ≤ 0.55

S355J0t ≤ 16

16 < t ≤ 4040 < t

≤ 0.20≤ 0.20≤ 0.22

≤ 0.55 ≤ 1.60 ≤ 0.030 ≤ 0.030 ≤ 0.012 ≤ 0.55

S355J2t ≤ 16

16 < t ≤ 4040 < t

≤ 0.20≤ 0.20≤ 0.22

≤ 0.55 ≤ 1.60 ≤ 0.025 ≤ 0.025 - ≤ 0.55

S355K2t ≤ 16

16 < t ≤ 4040 < t

≤ 0.20≤ 0.20≤ 0.22

≤ 0.55 ≤ 1.60 ≤ 0.025 ≤ 0.025 - ≤ 0.55

EN 10025 구조용 강재

규 격


Thickness


C Si Mn P S

A573-70 t ≤ 1.5(13)0.5(13) < t ≤ 1.5(40)

≤ 0.27≤ 0.28

0.15~0.40 0.85~1.20 ≤ 0.035 ≤ 0.04

ASTM A573 용접구조용 인성개량 탄소강판

규 격


Thickness


C Si Mn P S

A36

t ≤ 0.75(20) ≤ 0.25 ≤ 0.40 -

≤ 0.04 ≤ 0.05

0.75(20) < t ≤1.5(40) ≤ 0.25 ≤ 0.40 0.80~1.20

1.5(40) < t ≤ 2.5(65) ≤ 0.26 0.15~0.40 0.80~1.20

2.5(65) < t ≤ 4(100) ≤ 0.27 0.15~0.40 0.80~1.20

4(100) < t ≤ 0.29 0.15~0.40 0.80~1.20

ASTM A36 용접구조용 강재

ASTM A572 용접구조용 저합금 Nb-V 고장력 강재

1) 세부분석

94 95




규 격

Desingnation두께

Inch(mm)

인장강도 (MPa)Tensile

Strength

항복강도 (MPa)Yield Strength

연신율 (%)Elongation

충격시험 Impact Test

시험온도

Test Temper.평균값

Average

개별값

Individual Values

API-2H-42 t ≤4(101.6) 427~565 ≥ 289 ≥ 20 -40℃ ≥ 25 ≥ 20

API-2H-50 t ≤4(101.6) 483~620 ≥ 345 ≥ 18 -40℃ ≥ 30 ≥ 25

API-2W-42 t ≤1(25.4)1(25.4)< t

≥ 427 290~462290~427

≥ 20 -40℃ ≥ 34 ≥ 27

API-2W-50 t ≤1(25.4)1(25.4)< t

≥ 488 345~517345~483

≥ 18 -40℃ ≥ 41 ≥ 34

API-2W-60 t ≤1(25.4)1(25.4)< t

≥ 517 414~621414~586

≥ 16 -40℃ ≥ 48 ≥ 41

규 격

Desingnation

인장강도

(MPa)Tensile

Strength

항복강도

(MPa)Yield

Strength

연신율(%) Elongation

t ≤ 5 ≤ 10 ≤ 15 ≤ 20 ≤ 25 ≤ 30 ≤ 40 > 40

A

400~520 ≥ 235 ≥ 14 ≥ 16 ≥ 17 ≥ 18 ≥ 19 ≥ 20 ≥ 21 ≥ 22BDE

AH32

440~590 ≥ 315 ≥ 14 ≥ 16 ≥ 17 ≥ 18 ≥ 19 ≥ 20 ≥ 21 ≥ 22DH32EH32FH32AH36

490~620 ≥ 355 ≥ 13 ≥ 15 ≥ 16 ≥ 17 ≥ 18 ≥ 19 ≥ 20 ≥ 21DH36EH36FH36AH40

510~660 ≥ 390 ≥ 12 ≥ 14 ≥ 15 ≥ 16 ≥ 17 ≥ 18 ≥ 19 ≥ 20DH40EH40FH40

(1) Steel Plates for Shipbuilding 선체구조용

(2) Steel Plates for Marine Structure 해양구조용

5) Mechanical Properties 기계적 성질


시험온도

Test Temper

평균 흡수 에너지 (J) Absorbed Energy≤50 50 < t ≤70 70 < t ≤100

L T L T L T

+20℃ - - - - - -0℃

≥ 27 ≥ 20 ≥ 34 ≥ 24 ≥ 41 ≥ 27-20℃

-40℃

0℃

≥ 31 ≥ 22 ≥ 38 ≥ 26 ≥ 46 ≥ 31-20℃

-40℃

-60℃

0℃

≥ 34 ≥ 24 ≥ 41 ≥ 27 ≥ 50 ≥ 34-20℃

-40℃

-60℃

0℃

≥ 39 ≥ 26 ≥ 46 ≥ 31 ≥ 55 ≥ 37-20℃

-40℃

-60℃

96 97




규 격

Desingnation 두께 (mm)

인장강도

(MPa)Tensile

Strength

항복강도 (MPa)Yield

Strength

시험편연신율 (%)

Elongation

굽힘시험

Bending Test충격시험

Impact Test

굽힘각도

Bending Angle

내측반지름

Inside Radius

시험온도

Test Temper.

흡수에너지(J)Absorbed Energy

평균값

Average

개별값

Individual Values

SPPV235

6 < t ≤50

400~510

235 1A호 ≥17

180 °

Tx1.0

+0℃ ≥47 ≥2750 < t ≤100 215 1A호 ≥21Tx1.5

100 < t ≤200 195 4 호 ≥24

SPPV315

6 < t ≤50

490~610

315 1A호 ≥16

180 ° Tx1.5 +0℃ ≥47 ≥2750 < t ≤100 290 1A호 ≥20

100 < t ≤200 275 4 호 ≥23

SPPV355

6 < t ≤50

520~640

355 1A호 ≥14

180 ° Tx1.5 +0℃ ≥47 ≥2750 < t ≤100 355 1A호 ≥18

100 < t ≤200 315 4 호 ≥21

SPPV410

6 < t ≤50

550~670

410 1A호 ≥12

180 ° Tx1.5 -10℃ ≥47 ≥2750 < t ≤100 390 1A호 ≥16

100 < t ≤200 370 4 호 ≥28

SPPV450

6 < t ≤50

570~700

450 5 호 ≥19

180 ° Tx1.5 -10℃ ≥47 ≥2750 < t ≤100 430 5 호 ≥26

100 < t ≤200 410 4 호 ≥20

SPPV490

6 < t ≤50

610~740

490 5 호 ≥18

180 ° Tx1.5 -10℃ ≥47 ≥2750 < t ≤100 470 5 호 ≥25

100 < t ≤200 450 4 호 ≥19

(3) Steel Plates for Boilers & Pressure Vessels 보일러 및 압력용기용

KS/JIS (SPPV) 압력용기용 강재

규 격

Desingnation 두께 (mm)인장강도 (MPa)

Tensile Strength

항복강도 (MPa)Yield Strength 시험편



굽힘각도

Bending Angle

내측반지름

InsideRadius

SB410

t ≤25

410~550 ≥ 225

1A호 ≥ 21

180 °

Tx0.50

25 < t ≤50

10 호 ≥ 25

Tx0.75

50 < t ≤100 Tx1.00

100 < t ≤200 Tx1.25

SB450

t ≤25

450~590 ≥ 245

1A호 ≥ 19

180 °

Tx0.75

25 < t ≤10010 호 ≥ 23

Tx1.00

100 < t ≤200 Tx1.25

SB480

t ≤25

480~620 ≥ 265

1A호 ≥ 17

180 °

Tx1.00

25 < t ≤50

10 호 ≥ 21

Tx1.00

50 < t ≤100 Tx1.25

100 < t ≤200 Tx1.50

SB450M

t ≤25

450~590 ≥ 255

1A호 ≥ 19

180 °

Tx0.50

25 < t ≤10010 호 ≥ 23

Tx0.75

100 < t ≤150 Tx1.00

SB480M

t ≤25

480~620 ≥ 257

1A호 ≥ 17

180 °

Tx0.75

25 < t ≤10010 호 ≥ 21

Tx0.75

100 < t ≤150 Tx1.25

KS/JIS (SB) 보일러 및 압력용기용 탄소강 및 Mo강 강판

규 격


Tensile Strength




굽힘각도

Bending Angle

내측반지름

InsideRadius

SGV410

t ≤25

410~490 ≥ 225

1A호 ≥ 21

180 °

Radius

25 < t ≤50 Tx0.75

50 < t ≤10010 호 ≥ 25

Tx1.00

100 < t ≤200 Tx1.25

SGV450

t ≤25

450~540 ≥ 245

1A호 ≥ 19

180 °

Tx0.75

25 < t ≤50 Tx1.00

50 < t ≤10010 호 ≥ 23

Tx1.00

100 < t ≤200 Tx1.25

SGV480

t ≤25

480~590 ≥ 265

1A호 ≥ 17Tx1.00

25 < t ≤50 Tx1.00

50 < t ≤10010 호 ≥ 21

Tx1.25

100 < t ≤200 Tx1.50

KS/JIS (SGV) 중상온 압력용기용 탄소강 강판

98 99




0.2% 고온 내력 (N/mm2) 충격시험 Impact Test

시험온도 (℃)시험온도

(℃)

흡수에너지(J) Absorbed Energy

100℃ 150℃ 200℃ 250℃ 300℃ 350℃ 375℃ 400℃평균값

Average개별값

Individual Values

≥333 ≥314 ≥294 ≥275 ≥255 ≥245 ≥235 ≥226 0 3.2 2.6

≥382 ≥363 ≥343 ≥324 ≥304 ≥294 ≥284 ≥275 0 3.2 2.6

≥392 ≥382 ≥373 ≥263 ≥353 ≥343 ≥324 ≥314 0 3.2 2.6

규 격


Tensile Strength




굽힘각도

Bending Angle

내측반지름

InsideRadius

SEV245

t ≤25

510~650

≥370 1A호 ≥ 16

180 °

Tx1.00

25 < t ≤50 Tx1.25

50 < t ≤100 ≥355

14A호 ≥ 20 Tx1.50100 < t ≤125 500~640 ≥345

125 < t ≤150 490~630 ≥355

SEV295

t ≤25

540~690

≥420 1A호 ≥ 15

180 °

Tx1.25

25 < t ≤50 Tx1.50

50 < t ≤100 ≥400

14A호 ≥ 19 Tx1.75100 < t ≤125 530~680 ≥390

125 < t ≤150 520~670 ≥380

SEV345

t ≤25

590~735

≥430 1A호 ≥ 14

180 °

Tx1.25

25 < t ≤50 Tx1.50

50 < t ≤100 ≥430

14A호 ≥ 18 Tx1.75100 < t ≤125 580~730 ≥420

125 < t ≤150 570~715 ≥410

KS/JIS (SEV) 중상온 압력용기용 고강도 강판

100 101




규 격

Desingnation

인장강도 (MPa)

Tensile Strength


Strength

시험편연신율 (%)

Elongation

굽힘시험 Bending Test 충격시험 Impact Test

굽힘각도

Bending Angle

내측반지름

Inside Radius

시험온도 (℃)

흡수에너지(J)Absorbed Energy

평균값

Average

개별값

Individual Values

SQV1A 550~690 ≥ 345

t ≤20, 1A호

20 < t ≤401A호 또는 10호

t > 40, 10호

≥ 18 180 ° Tx1.75

시험온도는 주문자와

제조자 사이의 협의에 따른다.

≥ 40 ≥ 34

SQV1B 620~790 ≥ 480 ≥ 16 180 ° Tx1.75 ≥ 47 ≥ 40

SQV2A 550~690 ≥ 345 ≥ 18 180 ° Tx1.75 ≥ 40 ≥ 34

SQV2B 620~790 ≥ 480 ≥ 16 180 ° Tx1.75 ≥ 47 ≥ 40

SQV3A 550~690 ≥ 345 ≥ 18 180 ° Tx1.75 ≥ 40 ≥ 34

SQV3B 620~790 ≥ 480 ≥ 16 180 ° Tx1.75 ≥ 47 ≥ 40

KS/JIS (SQV) 압력용기용 조질형 Mn-Mo 강 및 Mn-Mo-Ni 강 강판

규 격


Tensile Strength



굽힘시험 Bending Test굽힘각도

Bending Angle

내측반지름

Inside Radius

SBV1A

t ≤50

520~660 ≥ 315

1A호 ≥ 15

180 °t ≤25, Tx1.00

25< t ≤50, Tx1.25 50< t≤150, Tx1.5t > 50 10 호 ≥ 19

SBV1B

t ≤50

550~690 ≥ 345

1A호 ≥ 15

180 °t ≤25, Tx1.25

25 < t ≤50, Tx1.5 50< t ≤150, Tx1.75t > 50 10 호 ≥ 18

SBV2

t ≤50

550~690 ≥ 345

1A호 ≥ 17

180 °t ≤25, Tx1.25

25< t ≤50, Tx1.5 50< t ≤150, Tx1.75t > 50 10 호 ≥ 20

SBV3

t ≤50

550~690 ≥ 345

1A호 ≥ 17

180 °t ≤25, Tx1.25

25< t ≤50, Tx1.5 50< t ≤150, Tx1.75t > 50 10 호 ≥ 20

KS/JIS (SBV) 보일러 및 압력용기용 Mn-Mo 강 및 Mn-Mo-Ni 강 강판

규 격


Tensile Strength




굽힘각도

Bending Angle

내측반지름

Inside Radius

SCMV 1t ≤50

380~550 ≥ 2251A호 ≥ 18

180 °

t ≤25, Tx0.7525 < t ≤100, Tx1.00

t > 100, Tx1.25

t > 50 10 호 ≥ 22

SCMV 2t ≤50

380~550 ≥ 2251A호 ≥ 19

180 °25 < t ≤50 10 호 ≥ 22

SCMV 3t ≤50

410~590 ≥ 2351A호 ≥ 19

180 °25 < t ≤50 10 호 ≥ 22

SCMV 4 - 410~590 ≥ 205 10 호 ≥ 18 180 °

t ≤25, Tx1.0025 < t ≤50, Tx1.2550< t ≤100, Tx1.50

t > 100, Tx1.75

SCMV 5 - 410~590 ≥ 205 10 호 ≥ 18 180 °

SCMV 2 - 410~590 ≥ 205 10 호 ≥ 18 180 °

KS/JIS (SCMV) 보일러 및 압력용기용 Cr-Mo 강 강판

102 103




규 격

Desingnation인장강도 (MPa)

Tensile Strength항복강도 (MPa)Yield Strength

두께 (mm) 시험편연신율 (%)

Elongation

SLA1 235A 400~510t ≤25, ≥ 235

t > 40, ≥ 215

6 ≤ t ≤16 1A호 ≥ 18

16 ≤ t ≤ 40 1A호 ≥ 22

t > 40 4 호 ≥ 24

SLA1 235B 400~510t ≤25, ≥ 235

t > 40, ≥ 215

6 ≤ t ≤16 1A호 ≥ 18

16 ≤ t ≤ 40 1A호 ≥ 22

t > 40 4 호 ≥ 24

SLA1 325A 440~560 ≥ 325

6 ≤ t ≤16 5 호 ≥ 22

16 ≤ t ≤ 40 5 호 ≥ 30

t > 40 4 호 ≥ 22

SLA1 325B 440~560 ≥ 325

6 ≤ t ≤16 5 호 ≥ 22

16 ≤ t ≤ 40 5 호 ≥ 30

t > 40 4 호 ≥ 22

SLA1 360 490~610 ≥ 360

6 ≤ t ≤16 5 호 ≥ 20

16 ≤ t ≤ 40 5 호 ≥ 28

t > 40 4 호 ≥ 20


굽힘각도

Bending Angle내측반지름

Inside Radius

시험온도 Test Temperature 흡수에너지(J)Absorbed

Energy6 ≤t < 8.5 < 11 ≤20 > 20

180 ° Tx1.00 -5℃ -5℃ -5℃ -10℃

최고값

1/2 이상

180 ° Tx1.00 -53℃ -20℃ -15℃ -30℃

180 ° Tx1.5 -40℃ -30℃ -25℃ -35℃

180 ° Tx1.5 -60℃ -50℃ -45℃ -55℃

180 ° Tx1.5 -60℃ -50℃ -45℃ -55℃

KS/JIS (SLA1) 저온 압력 용기용 탄소강 강판

104 105




KS/JIS (SLXN) 저온 압력용기용 니켈 강판

규 격



두께 (mm) 시험편연신율 (%)

Elongation

SL2N255 450~490 ≥ 255

6 ≤ t ≤16 5 호 ≥ 24

16 ≤ t ≤20 5 호 ≥ 29

t > 20 4 호 ≥ 24

SL3N255 450~490 ≥ 255

6 ≤ t ≤16 5 호 ≥ 24

16 ≤ t ≤20 5 호 ≥ 29

t > 20 4 호 ≥ 24

SL3N275 480~620 ≥ 275

6 ≤ t ≤16 5 호 ≥ 22

16 ≤ t ≤20 5 호 ≥ 26

t > 20 4 호 ≥ 22

SL3N440 540~690 ≥ 440

6 ≤ t ≤16 5 호 ≥ 21

16 ≤ t ≤20 5 호 ≥ 25

t > 20 4 호 ≥ 21

SL5N590 690~830 ≥ 590

6 ≤ t ≤16 5 호 ≥ 21

16 ≤ t ≤20 5 호 ≥ 25

t > 20 4 호 ≥ 21

SL9N520 690~830 ≥ 520

6 ≤ t ≤16 5 호 ≥ 21

16 ≤ t ≤20 5 호 ≥ 25

t > 20 4 호 ≥ 21

SL9N590 690~830 ≥ 590

6 ≤ t ≤16 5 호 ≥ 21

16 ≤ t ≤20 5 호 ≥ 25

t > 20 4 호 ≥ 21



내측반지름

Inside Radius 시험온도 Test

Temper.

평균 흡수에너지(J) Absorbed Energy

6 ≤t < 8.5 < 11 ≥ 11

t ≤ 25평균값

Average

개별값

Individual Values

평균값

Average

개별값

Individual Values

평균값

Average

개별값

Individual Values

180 ° t ≤25, Tx0.5t >25, Tx1.0 -70℃ ≥ 11 ≥ 10 ≥ 17 ≥ 14 ≥ 21 ≥ 17

180 ° t ≤25, Tx0.5t >25, Tx1.0 -101℃ ≥ 11 ≥ 10 ≥ 17 ≥ 14 ≥ 21 ≥ 17

180 ° t ≤25, Tx0.5t >25, Tx1.0 -101℃ ≥ 11 ≥ 10 ≥ 17 ≥ 14 ≥ 21 ≥ 17

180 ° t ≤25, Tx1.0t >25, Tx1.5 -110℃ ≥ 14 ≥ 11 ≥ 22 ≥ 17 ≥ 27 ≥ 21

180 ° t ≤19, Tx1.0t >19, Tx1.5 -130℃ ≥ 21 ≥ 18 ≥ 29 ≥ 25 ≥ 41 ≥ 34

180 ° t ≤19, Tx1.0t >19, Tx1.5 -196℃ ≥ 18 ≥ 14 ≥ 25 ≥ 22 ≥ 34 ≥ 27

180 ° t ≤19, Tx0.5t >19, Tx1.5 -196℃ ≥ 21 ≥ 18 ≥ 29 ≥ 25 ≥ 41 ≥ 34

106 107




규 격



연신율 (%) Elongation

GL = 200 mm GL = 50 mm

A285-A 310~450 ≥ 165 27 30

A285-B 345~485 ≥ 185 25 28

A285-C 380~515 ≥ 205 23 27

ASTM A285 압력용기용 저, 중강도용 탄소강판

규 격




GL = 200 mm GL = 50 mm

A515-60 415~550 ≥ 220 21 25

A515-65 450~585 ≥ 240 19 23

A515-70 485~620 ≥ 260 17 21

ASTM A515 중, 고온용 압력용기용 탄소강판

규 격




GL = 200 mm GL = 50 mm

A516-55 380~515 ≥ 205 23 27

A516-60 415~550 ≥ 220 21 25

A516-65 450~585 ≥ 240 19 23

A516-70 485~620 ≥ 260 17 21

ASTM A516 상온 및 저온용 탄소강판

규 격




GL = 200 mm GL = 50 mm

A204 Grade A 450~585 ≥ 255 ≥ 19 ≥ 23

A204 Grade B 485~620 ≥ 275 ≥ 17 ≥ 21

A204 Grade C 515~655 ≥ 295 ≥ 16 ≥ 20

ASTM A204 압력용기용 Mo 합금강판

규 격

Desingnation두께

(mm)인장강도 (MPa)



GL = 200 mm GL = 50 mm

A537 Class1

t ≤65 485~620 ≥ 345

t = 200, ≥ 18≥ 22

65 < t ≤100 450~585 ≥ 310

100 < t ≤150 - - -

A537 Class2

t ≤65 550~690 ≥ 415

-≥ 22

65 < t ≤100 515~655 ≥ 380

100 < t ≤150 485~620 ≥ 315 ≥ 20

A537 Class3

t ≤65 550~690 ≥ 380

-≥ 22

65 < t ≤100 515~655 ≥ 345

100 < t ≤150 485~620 ≥ 315 ≥ 20

ASTM A537 압력용기용 열처리 C-Mn-Si 강판

규 격

Desingnation

인장강도 (MPa)

Tensile Strength


Strength

연신율 (%) Elongation Reduction of Area

GL = 200 mm GL = 50 mm Measure on Round Teat Specimen

Measure on Flat Specimen

A387-2-C1 380~550 ≥ 230 ≥ 18 ≥ 22 - -

A387-2-C2 485~620 ≥ 310 ≥ 18 ≥ 22 - -

A387-12-C1 380~550 ≥ 230 ≥ 18 ≥ 22 - -

A387-12-C2 450~585 ≥ 275 ≥ 19 ≥ 22 - -

A387-11-C1 415~585 ≥ 240 ≥ 19 ≥ 22 - -

A387-11-C2 515~690 ≥ 310 ≥ 18 ≥ 22 - -

A387-22-C1 415~585 ≥ 205 - ≥ 18 ≥ 45 ≥ 40

A387-22-C2 515~690 ≥ 310 - ≥ 18 ≥ 45 ≥ 40

A387-22L-C1 415~585 ≥ 205 - ≥ 18 ≥ 45 ≥ 40

A387-21-C1 415~585 ≥ 205 - ≥ 18 ≥ 45 ≥ 40

A387-21-C2 515~690 ≥ 310 - ≥ 18 ≥ 45 ≥ 40

A387-21L-C1 415~585 ≥ 205 - ≥ 18 ≥ 45 ≥ 40

A387-5-C1 415~585 ≥ 205 - ≥ 18 ≥ 45 ≥ 40

A387-5-C2 515~690 ≥ 310 - ≥ 18 ≥ 45 ≥ 40

A387-9-C1 415~585 ≥ 205 - ≥ 18 ≥ 45 ≥ 40

A387-9-C2 515~690 ≥ 310 - ≥ 18 ≥ 45 ≥ 40

A387-91-C2 585~760 ≥ 415 - ≥ 18 - -

ASTM A387 압력용기용 Mo-C 강 강판

108 109




규 격




GL = 200 mm GL = 50 mm

A302 Grade A 515~655 ≥ 310 ≥ 15 ≥ 19

A302 Grade B 550~690 ≥ 345 ≥ 15 ≥ 18

A302 Grade C 550~690 ≥ 345 ≥ 17 ≥ 20

A302 Grade D 550~690 ≥ 345 ≥ 17 ≥ 20

ASTM A302 압력용기용 Mn-Mo 강 및 Mn-Mo-Ni 강 강판

규 격




GL = 50 mm

A533 Class 1 550~690 ≥ 345 ≥ 18

A533 Class 2 620~795 ≥ 485 ≥ 16

A533 Class 3 690~860 ≥ 570 ≥ 16

ASTM A533 압력용기용 조질형 Mn-Mo 강 및 Mn-Mo-Ni 강 강판

규 격

Desingnation두께

(mm)


Strength

항복강도 (MPa)Yield Strength


GL = 200 mm GL = 50 mm

A203 Grade At ≤50 450~585 ≥ 255

≥ 19 ≥ 23t > 50 450~585 ≥ 255

A203 Grade Bt ≤50 485~620 ≥ 275

≥ 17 ≥ 21t > 50 485~620 ≥ 275

A203 Grade Dt ≤50 450~585 ≥ 255

≥ 19 ≥ 23t > 50 450~585 ≥ 255

A203 Grade Et ≤50 485~620 ≥ 275

≥ 17 ≥ 21t > 50 485~620 ≥ 275

A203 Grade Ft ≤50 550~690 ≥ 380

- ≥ 20t > 50 515~655 ≥ 345

ASTM A203 압력용기용 Ni 강 강판

규 격




GL = 50 mm

A553 Type Ⅰ 690~825 ≥ 585 ≥ 20

A553 Type Ⅱ 690~825 ≥ 585 ≥ 20

ASTM A203 압력용기용 조질형 8,9% Ni 강 강판

규 격

Desingnation(PSL1)

항복강도 (Yield Strength)Rt0.5 MPa (psi)

인장강도 (Tensile Strength)Rm MPa (psi)

연신율 (%) ElongationMinimum

API-A ≥ 210 (30 500) ≥ 335 (48 600)

e=C

C is 1940(SI), 625000(USC unitis)

e= minimum elongation

A : Cross-Sectional area of the test specimen

U : specified minimum tensile strength

API-B ≥ 245 (35 500) ≥ 415 (60 200)

API-X42 ≥ 290 (42 100) ≥ 415 (60 200)

API-X46 ≥ 320 (46 400) ≥ 435(63 100)

API-X52 ≥ 360 (52 200) ≥ 460 (66 700)

API-X56 ≥ 390 (56 600) ≥ 490 (71 100)

API-X60 ≥ 415 (60 200) ≥ 520 (75 400)

API-X65 ≥ 450 (65 300) ≥ 535 (77 600)

API-X70 ≥ 485 (70 300) ≥ 570 (82 700)

규 격

Desingnation(PSL2)

항복강도 (Yield Strength)Rt0.5 MPa (psi)

인장강도 (Tensile Strength)Rm MPa (psi) 최대항복비

Rt0.5 / Rm

연신율 (%) ElongationMinimum

Minimum Maximum Minimum Maximum

API-BM ≥ 245 (35 500) ≥ 450 (65 300) ≥ 415 (60 200) ≥ 760 (110 200) 0.93

e=C

C is 1940(SI), 625 000(USC units)

e= minimum elingation

A : Cross-Sectional area of the test

specimen

U : specified minimum tensile

strength

API-X42M ≥ 290 (42 100) ≥ 495 (71 800) ≥ 415 (60 200) ≥ 760 (110 200) 0.93

API-X46M ≥ 320 (46 400) ≥ 525 (76 100) ≥ 435 (63 100) ≥ 760 (100 200) 0.93

API-X52M ≥ 360 (52 200) ≥ 530 (76 900) ≥ 460 (66 700) ≥ 760 (110 200) 0.93

API-X56M ≥ 390 (56 600) ≥ 545 (79 000) ≥ 490 (71 100) ≥ 760 (110 200) 0.93

API-X60M ≥ 415 (60 200) ≥ 565 (81 900) ≥ 520 (75 400) ≥ 760 (110 200) 0.93

API-X65M ≥ 450 (65 300) ≥ 600 (87 000) ≥ 535 (77 600) ≥ 760 (110 200) 0.93

API-X70M ≥ 485 (70 300) ≥ 635 (92 100) ≥ 570 (82 700) ≥ 760 (110 200) 0.93

API-X80M ≥ 555 (80 500) ≥ 705 (102 300) ≥ 625 (90 600) ≥ 825 (119 700) 0.93

API-X100M ≥ 690 (100 100) ≥ 840 (121 800) ≥ 760 (110 200) ≥ 990 (143 600) 0.97

(4) Steel Plates for Line Pipes 송유관용

110 111




KS/JIS (SS) 일반구조용 강재 KS/JIS (SMA) 용접구조용 내후성강재

규 격

Desingnation


Strength

항복강도 (MPa) Yield Strength 연신율 (%) Elongation 굽힘시험 Bending Test

t ≤16 t ≤40 t ≤100 >100 t ≤5 t ≤16 t ≤40 >40굽힘각도

Bending Angle

내측반지름

Inside Radius

SS330 330~430 ≥ 205 ≥ 195 ≥ 175 ≥ 165 ≥ 26 ≥ 21 ≥ 26 ≥ 28 180 ° Tx0.5

SS400 400~510 ≥ 245 ≥ 235 ≥ 215 ≥ 205 ≥ 21 ≥ 17 ≥ 21 ≥ 23 180 ° Tx1.5

SS490 490~610 ≥ 285 ≥ 275 ≥ 255 ≥ 245 ≥ 19 ≥ 15 ≥ 19 ≥ 21 180 ° Tx2.0

SS540 ≥ 540 ≥ 400 ≥ 390 - - ≥ 16 ≥ 13 ≥ 17 - 180 ° Tx2.0

규 격

Desingnation인장강도 (MPa)Tensile Strength

항복강도 (MPa) Yield Strength 연신율 (%) Elongation 충격시험 Impact Test

t ≤16 t ≤40 ≤75 ≤100 ≤160 > 160 t ≤5 t ≤16 ≤50 > 40시험온도

Test Temper.평균 흡수 에너지 (J)

Absorbed Energy

SM400 A 400~510

≥ 245 ≥ 235 ≥ 215 ≥ 215≥ 205 ≥ 195

≥ 23 ≥ 18 ≥ 22 ≥ 24

- -

SM400 B 400~510 +0℃ ≥ 27

SM400 C 400~510 - - +0℃ ≥ 47

SM490 A 490~610

≥ 325 ≥ 315 ≥ 295 ≥ 295≥ 285 ≥275

≥ 22 ≥ 17 ≥ 21 ≥ 23

- -

SM490 B 490~610 +0℃ ≥ 27

SM490 C 490~610 - - +0℃ ≥ 47

SM490 YA 490~610

≥ 365 ≥ 355 ≥ 335 ≥ 325

≥ 19 ≥ 15 ≥ 19 ≥ 21- -

SM490 YB 490~610 +0℃ ≥ 27

SM520 B 520~640≥ 19 ≥ 15 ≥ 19 ≥ 21

+0℃ ≥ 27

SM520 C 520~640 +0℃ ≥ 47

SM570 520~640 ≥ 460 ≥ 450 ≥ 430 ≥ 420 ≥ 19 ≥ 19 ≥ 26 ≥ 20 -5℃ ≥ 47

규 격



≤16 ≤40 ≤75 ≤100 ≤160 > 160 t ≤5 t ≤16 >16 > 40시험온도


Absorbed Energy

SMA400 A

400~540 ≥ 245 ≥ 235 ≥ 215 ≥ 215≥ 205 ≥ 195

≥ 22 ≥ 17 ≥ 21 ≥ 23

- -

SMA400 B +0℃ ≥ 27

SMA400 C - - +0℃ ≥ 47

SMA490 A

490~610 ≥ 365 ≥ 355 ≥ 335 ≥ 325≥ 305 ≥ 295

≥ 19 ≥ 15 ≥ 19 ≥ 21

- -

SMA490 B +0℃ ≥ 27

SMA490 C - * +0℃ ≥ 47

SMA570 570~720 ≥ 460 ≥ 450 ≥ 430 ≥ 420 - - - ≥ 19 ≥ 26 ≥ 20 -5℃ ≥ 47

규 격



6 ≤t < 12 12 ≤t <16 ≤40 ≤100 6 ≤t < 16 ≤50 ≤100시험온도


Absorbed Energy

SN400 A 400~510 ≥ 235 ≥ 235 ≥ 235 ≥ 215 ≥ 17 ≥ 21 ≥ 23 - -

SN400 B 400~510 ≥ 235 235~355 235~355 215~335≥ 18 ≥ 22 ≥ 24

+0℃ ≥ 27

SN400 C 400~510 - - 235~355 215~335 +0℃ ≥ 27

SN490B 490~610 ≥ 325 325~445 325~445 295~415≥ 17 ≥ 21 ≥ 23

+0℃ ≥ 27

SN490C 490~610 - - 325~445 295~415 +0℃ ≥ 27

규 격


항복강도 (MPa) Yield Strength연신율 (%) Elongation

≤50 ≤200

A283 A 310~415 ≥ 165 ≥ 30 ≥ 27

A283 B 345~450 ≥ 185 ≥ 28 ≥ 25

A283 C 380~515 ≥ 205 ≥ 25 ≥ 22

A283 D 415~550 ≥ 230 ≥ 23 ≥ 20

(5) Structural Steel Plates 구조용

KS/JIS (SM) 용접구조용 강재

KS/JIS (SN) 건축구조용 강재

ASTM A283 저, 중항장력 탄소강판

112 113




규 격

Desingnation

인장강도 (MPa)Tensile Strength

항복강도 (MPa) Yield Strength



시험온도

Test Temper.

평균 흡수 에너지 (J) Absorbed

Energy

t ≤16 16 < t ≤40

40 < t ≤63

63 < t ≤80

80 < t ≤100 t ≤3 3 ≤ t

≤100 Position 3 ≤ t ≤40

40 < t ≤63

63 < t ≤100 150≤t

S235JR ≥ 235 ≥ 225 ≥ 215 ≥ 215 ≥ 215 360~510 360~510 L ≥ 26 ≥ 25 ≥ 24 20℃ 27

S235J0 ≥ 235 ≥ 225 ≥ 215 ≥ 215 ≥ 215 360~510 360~510 L ≥ 26 ≥ 25 ≥ 24 +0℃ 27

S235J2 ≥ 235 ≥ 225 ≥ 215 ≥ 215 ≥ 215 360~510 360~510 T ≥ 24 ≥ 23 ≥ 22 -20℃ 27

S275JR ≥ 275 ≥ 265 ≥ 255 ≥ 245 ≥ 235 430~580 410~560 L ≥ 23 ≥ 22 ≥ 21 20℃ 27

S275J0 ≥ 275 ≥ 265 ≥ 255 ≥ 245 ≥ 235 430~580 410~560 L ≥ 23 ≥ 22 ≥ 21 +0℃ 27

S275J2 ≥ 275 ≥ 265 ≥ 255 ≥ 245 ≥ 235 430~580 410~560 T ≥ 21 ≥ 20 ≥ 19 -20℃ 27

S355JR ≥ 355 ≥ 345 ≥ 335 ≥ 325 ≥ 315 510~680 470~630 L ≥ 22 ≥ 21 ≥ 20 20℃ 27

S355J0 ≥ 355 ≥ 345 ≥ 335 ≥ 325 ≥ 315 510~680 470~630 L ≥ 22 ≥ 21 ≥ 20 +0℃ 27

S355J2 ≥ 355 ≥ 345 ≥ 335 ≥ 325 ≥ 315 510~680 470~630 L ≥ 22 ≥ 21 ≥ 20 -20℃ 27

S355K2 ≥ 355 ≥ 345 ≥ 335 ≥ 325 ≥ 315 510~680 470~630 T ≥ 20 ≥ 19 ≥ 18 -20℃ 40

규 격



≤50 ≤200

A709-36 400~550 ≥ 250 ≥ 23 ≥ 20

A709-50 ≥ 450 ≥ 345 ≥ 21 ≥ 18

규 격



≤50 ≤200

A572-42 ≥ 415 ≥ 290 ≥ 24 ≥ 20

A572-50 ≥ 450 ≥ 345 ≥ 21 ≥ 18

A572-60 ≥ 520 ≥ 415 ≥ 18 ≥ 16

A572-65 ≥ 550 ≥ 450 ≥ 17 ≥ 15

규 격



≤50 ≤200

A573-70 485~620 ≥ 290 ≥ 21 ≥ 18

규 격



≤50 ≤200

A36 400~550 ≥ 250 ≥ 23 ≥ 20

ASTM A572 용접구조용 저합금 Nb-V 고장력강재

ASTM A573 용접구조용 인성개량 탄소강판

ASTM A709 교량용 강재

ASTM A36 용접구조용 강재 EN10025 구조용 강재

114 115




Width(mm) 1000

~1200

1201~

1400

1401~

1600

1601~

1800

1801~

2000

2001~

2200

2201~

2400

2401~

2600

2601~

2800

2801~

3000

3001~

3200

3201~

3400

3401~

3600

3601~

3800

3801~

4000

4001~

4200

4201~

4400

4401~

4600

4601~

4800

12 ≤t <15 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

15 ≤t <18 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

18 ≤t <20 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.4 23.4

20 ≤t <22 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.3 23.2 22.2 21.3

22 ≤t <24 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.6 23.4 22.3 21.3 20.4 19.5

24 ≤t <26 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.0 22.7 21.6 20.6 19.6 18.8 18.0

26 ≤t <28 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 23.6 22.3 21.1 20.1 19.1 18.2 17.4 16.7

28 ≤t <32 25.0 25.0 21.9 25.0 25.0 25.0 25.0 25.0 25.0 23.4 21.9 20.7 19.5 18.5 17.5 16.7 15.9 15.3 14.6

32 ≤t <38 24.6 21.1 18.5 23.9 24.3 24.4 24.6 22.7 21.1 19.7 18.5 17.4 16.4 15.5 14.8 14.1 13.4 12.8 12.3

38 ≤t <45 20.8 17.8 15.6 20.2 20.4 20.6 20.8 19.2 17.8 16.6 15.6 14.7 13.9 13.1 12.5 11.9 11.3 10.8 10.4

45 ≤t <50 18.7 16.0 14.0 18.2 18.4 18.6 18.7 17.3 16.0 15.0 14.0 13.2 12.5 11.8 11.2 10.7 10.2 9.7 9.3

50 ≤t <55 17.0 14.6 12.7 16.5 16.7 16.9 17.0 15.7 14.6 13.6 12.7 12.0 11.3 10.7 10.2 9.7 9.3 8.9 8.5

55 ≤t <60 15.6 13.4 11.7 15.1 15.3 15.5 15.6 14.4 13.4 12.5 11.7 11.0 10.4 9.8 9.3 8.9 8.5 8.1 7.8

60 ≤t <65 12.7 12.3 10.8 12.7 12.7 12.7 12.7 12.7 12.3 11.5 10.8 10.1 9.6 9.1 8.6 8.2 7.8

65 ≤t <70 12.7 11.4 10.0 12.7 12.7 12.7 12.7 12.3 11.4 10.7 10.0 9.4 8.9 8.4 8.0

70 ≤t <75 12.5 10.7 9.3 12.1 12.2 12.4 12.5 11.5 10.7 10.0 9.3 8.8 8.3 7.9

수주제한 (Not Available)75 ≤t <80 11.7 10.0 8.7 11.3 11.5 11.6 11.7 10.8 10.0 9.3 8.7 8.2 7.8

80 ≤t <90 10.4 8.9 7.8 10.1 10.2 10.3 10.4 9.6 8.9 8.3 7.8 7.3

Thickness(mm)

Width(mm) 1000

~1200

1201~

1400

1401~

1600

1601~

1800

1801~

2000

2001~

2200

2201~

2400

2401~

2600

2601~

2800

2801~

3000

3001~

3200

3201~

3400

3401~

3600

3601~

3800

3801~

4000

4001~

4200

4201~

4400

4401~

4600

4601~

4800

6 ≤t <7 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0

7 ≤t <8 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0수주제한 (Not Available)

8 ≤t <9 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0

9 ≤t <10 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0

10 ≤t <12 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0

12 ≤t <14 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

14 ≤t <16 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

16 ≤t <18 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

18 ≤t <20 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

20 ≤t <22 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.4 23.4

22 ≤t <24 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.3 23.2 22.2 21.3

24 ≤t <26 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.6 23.4 22.3 21.3 20.4 19.5

26 ≤t <28 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.0 22.7 21.6 20.6 19.6 18.8 18.0

28 ≤t <32 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 23.6 22.3 21.1 20.1 19.1 18.2 17.4 16.7

32 ≤t <38 25.0 25.0 21.9 25.0 25.0 25.0 25.0 25.0 25.0 23.4 21.9 20.7 19.5 18.5 17.5 16.7 15.9 15.3 14.6

38 ≤t <45 24.6 21.1 18.5 23.9 24.3 24.4 24.6 22.7 21.1 19.7 18.5 17.4 16.4 15.5 14.8 14.1 13.4 12.8 12.3

45 ≤t <50 20.8 17.8 15.6 20.2 20.4 20.6 20.8 19.2 17.8 16.6 15.6 14.7 13.9 13.1 12.5 11.9 11.3 10.8 10.4

50 ≤t <55 18.7 16.0 14.0 18.2 18.4 18.6 18.7 17.3 16.0 15.0 14.0 13.2 12.5 11.8 11.2 10.7 10.2 9.7 9.3

55 ≤t <60 17.0 14.6 12.7 16.5 16.7 16.9 17.0 15.7 14.6 13.6 12.7 12.0 11.3 10.7 10.2 9.7 9.3 8.9 8.5

60 ≤t <65 15.0 13.4 11.7 14.0 14.0 14.0 14.0 14.0 13.4 12.5 11.7 11.0 10.4 9.8 9.3 8.9 8.5 8.1

65 ≤t <70 12.7 12.3 10.8 12.7 12.7 12.7 12.7 12.7 12.3 11.5 10.8 10.1 9.6 9.1 8.6 8.2 7.8 7.5

70 ≤t <75 12.7 11.4 10.0 12.7 12.7 12.7 12.7 12.3 11.4 10.7 10.0 9.4 8.9 8.4 8.0 7.6 7.3 6.9

75 ≤t <80 12.5 10.7 9.3 12.1 12.2 12.4 12.5 11.5 10.7 10.0 9.3 8.8 8.3 7.9 7.5 7.1 6.8 6.5

80 ≤t <90 11.7 10.0 8.7 11.3 11.5 11.6 11.7 10.8 10.0 9.3 8.7 8.2 7.8 7.4 7.0 6.7 6.3 6.1

90 ≤t <100 10.4 8.9 7.8 10.1 10.2 10.3 10.4 9.6 8.9 8.3 7.8 7.3 6.9 6.5 6.2 5.9 5.6 5.4

100 ≤t <120 9.3 8.0 7.0 9.1 9.2 9.3 9.3 8.6 8.0 7.5 7.0 6.6 6.2 5.9 5.6 5.3 5.1 4.8

120 ≤t <130 7.8 6.7 5.8 7.5 7.6 7.7 7.8 7.2 6.7 6.2 5.8 5.5 5.2 4.9 4.6 4.4

130 ≤t <140 7.2 6.1 5.4 7.0 7.0 7.1 7.2 6.6 6.1 5.7 5.4 5.0 4.8 4.5 4.3

140 ≤t <150 6.7 5.7 5.0 6.5 6.5 6.6 6.7 6.1 5.7 5.3 5.0 4.7 4.4 4.2 4.0

150 ≤t <160 6.2 5.3 4.6 6.0 6.1 6.2 6.2 5.7 5.3 5.0 4.6 4.4 4.1 3.9

160 ≤t <170 5.8 5.0 4.3 5.6 5.7 5.8 5.8 5.4 5.0 4.6 4.3 4.1 3.9수주제한 (Not Available)

170 ≤t <180 5.5 4.7 4.1 5.3 5.4 5.4 5.5 5.0 4.7 4.4 4.1 3.8 3.6

180 ≤t <190 5.2 4.4 3.9 5.0 5.1 5.1 5.2 4.8 4.4 4.1 3.9 3.6

190 ≤t <200 4.9 4.2 3.7 4.7 4.8 4.8 4.9 4.5 4.2 3.9 3.7 3.4

Thickness(mm)

(1) AS-Rolled (2) TMCP제조가능 최대 제품길이 (Maximum length of product) 단위 : M사전협의 필요 (Please consult us in advance) 제조가능 최대 제품길이 (Maximum length of product) 단위 : M사전협의 필요 (Please consult us in advance)

6) Available Sizes 공급가능규격

※ 제품최소 길이 (Minimum length of product) : 3M


116 117




(3) API AS-Rolled (4) API TMCP제조가능 최대 제품길이 (Maximum length of product) 단위 : M사전협의 필요 (Please consult us in advance) 제조가능 최대 제품길이 (Maximum length of product) 단위 : M사전협의 필요 (Please consult us in advance)

Width(mm) 1000

~1200

1201~

1400

1401~

1600

1601~

1800

1801~

2000

2001~

2200

2201~

2400

2401~

2600

2601~

2800

2801~

3000

3001~

3200

3201~

3400

3401~

3600

3601~

3800

3801~

4000

4001~

4200

4201~

4400

4401~

4600

4601~

4800

6 ≤t <7 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0

7 ≤t <8 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0수주제한 (Not Available)

8 ≤t <9 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0

9 ≤t <10 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0

10 ≤t <12 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0

12 ≤t <14 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

14 ≤t <16 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

16 ≤t <18 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

18 ≤t <20 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

20 ≤t <22 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.4 23.4

22 ≤t <24 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.3 23.2 22.2 21.3

24 ≤t <26 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.6 23.4 22.3 21.3 20.4 19.5

26 ≤t <28 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.0 22.7 21.6 20.6 19.6 18.8 18.0

28 ≤t <32 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 23.6 22.3 21.1 20.1 19.1 18.2 17.4 16.7

32 ≤t <38 25.0 25.0 21.9 25.0 25.0 25.0 25.0 25.0 25.0 23.4 21.9 20.7 19.5 18.5 17.5 16.7 15.9 15.3 14.6

38 ≤t <45 24.6 21.1 18.5 23.9 24.3 24.4 24.6 22.7 21.1 19.7 18.5 17.4 16.4 15.5 14.8 14.1 13.4 12.8 12.3

45 ≤t <50 20.8 17.8 15.6 20.2 20.4 20.6 20.8 19.2 17.8 16.6 15.6 14.7 13.9 13.1 12.5 11.9 11.3 10.8 10.4

50 ≤t <55 18.7 16.0 14.0 18.2 18.4 18.6 18.7 17.3 16.0 15.0 14.0 13.2 12.5 11.8 11.2 10.7 10.2 9.7 9.3

55 ≤t <60 17.0 14.6 12.7 16.5 16.7 16.9 17.0 15.7 14.6 13.6 12.7 12.0 11.3 10.7 10.2 9.7 9.3 8.9 8.5

Thickness(mm)

Width(mm) 1000

~1200

1201~

1400

1401~

1600

1601~

1800

1801~

2000

2001~

2200

2201~

2400

2401~

2600

2601~

2800

2801~

3000

3001~

3200

3201~

3400

3401~

3600

3601~

3800

3801~

4000

4001~

4200

4201~

4400

4401~

4600

4601~

4800

10 ≤t <12 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 수주제한

(Not Available)

12 ≤t <14 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

14 ≤t <16 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

16 ≤t <18 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

18 ≤t <20 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

20 ≤t <22 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.4 23.4

22 ≤t <24 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.3 23.2 22.2 21.3

24 ≤t <26 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.6 23.4 22.3 21.3 20.4 19.5

26 ≤t <28 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.0 22.7 21.6 20.6 19.6 18.8 18.0

28 ≤t <32 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 23.6 22.3 21.1 20.1 19.1 18.2 17.4 16.7

32 ≤t <38 25.0 25.0 21.9 25.0 25.0 25.0 25.0 25.0 25.0 23.4 21.9 20.7 19.5 18.5 17.5 16.7 15.9 15.3 14.6

38 ≤t <45 24.6 21.1 18.5 23.9 24.3 24.4 24.6 22.7 21.1 19.7 18.5 17.4 16.4 15.5 14.8 14.1 13.4 12.8 12.3

45 ≤t <50 20.8 17.8 15.6 20.2 20.4 20.6 20.8 19.2 17.8 16.6 15.6 14.7 13.9 13.1 12.5 11.9 11.3 10.8 10.4

50 ≤t <55 18.7 16.0 14.0 18.2 18.4 18.6 18.7 17.3 16.0 15.0 14.0 13.2 12.5 11.8 11.2 10.7 10.2 9.7 9.3

55 ≤t <60 17.0 14.6 12.7 16.5 16.7 16.9 17.0 15.7 14.6 13.6 12.7 12.0 11.3 10.7 10.2 9.7 9.3 8.9 8.5

Thickness(mm)



118 119




제조가능 최대 제품길이 (Maximum length of product) 단위 : M사전협의 필요 (Please consult us in advance)

Width(mm) 1000

~1200

1201~

1400

1401~

1600

1601~

1800

1801~

2000

2001~

2200

2201~

2400

2401~

2600

2601~

2800

2801~

3000

3001~

3200

3201~

3400

3401~

3600

3601~

3800

3801~

4000

4001~

4200

4201~

4400

4401~

4600

4601~

4800

6 ≤t <7 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0수주제한 (Not Available)

7 ≤t <8 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0

8 ≤t <9 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0

9 ≤t <10 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0

10 ≤t <12 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0

12 ≤t <14 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

14 ≤t <16 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

16 ≤t <18 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

18 ≤t <20 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

20 ≤t <22 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.4 23.4

22 ≤t <24 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.3 23.2 22.2 21.3

24 ≤t <26 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.6 23.4 22.3 21.3 20.4 19.5

26 ≤t <28 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 24.0 22.7 21.6 20.6 19.6 18.8 18.0

28 ≤t <32 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 23.6 22.3 21.1 20.1 19.1 18.2 17.4 16.7

32 ≤t <38 25.0 25.0 21.9 25.0 25.0 25.0 25.0 25.0 25.0 23.4 21.9 20.7 19.5 18.5 17.5 16.7 15.9 15.3 14.6

38 ≤t <45 24.6 21.1 18.5 23.9 24.3 24.4 24.6 22.7 21.1 19.7 18.5 17.4 16.4 15.5 14.8 14.1 13.4 12.8 12.3

45 ≤t <50 20.8 17.8 15.6 20.2 20.4 20.6 20.8 19.2 17.8 16.6 15.6 14.7 13.9 13.1 12.5 11.9 11.3 10.8 10.4

50 ≤t <55 18.7 16.0 14.0 18.2 18.4 18.6 18.7 17.3 16.0 15.0 14.0 13.2 12.5 11.8 11.2 10.7 10.2 9.7 9.3

55 ≤t <60 17.0 14.6 12.7 16.5 16.7 16.9 17.0 15.7 14.6 13.6 12.7 12.0 11.3 10.7 10.2 9.7 9.3 8.9 8.5

60 ≤t <65 15.6 13.4 11.7 15.1 15.3 15.5 15.6 14.4 13.4 12.5 11.7 11.0 10.4 9.8 9.3 8.9 8.5 8.1

65 ≤t <70 14.4 12.3 10.8 12.7 12.7 12.7 12.7 12.7 12.3 11.5 10.8 10.1 9.6 9.1 8.6 8.2 7.8 7.5

70 ≤t <75 13.4 11.4 10.0 12.7 12.7 12.7 12.7 12.3 11.4 10.7 10.0 9.4 8.9 8.4 8.0 7.6 7.3 6.9

75 ≤t <80 12.5 10.7 9.3 12.1 12.2 12.4 12.5 11.5 10.7 10.0 9.3 8.8 8.3 7.9 7.5 7.1 6.8 6.5

80 ≤t <90 11.7 10.0 8.7 11.3 11.5 11.6 11.7 10.8 10.0 9.3 8.7 8.2 7.8 7.4 7.0 6.7 6.3

90 ≤t <100 10.4 8.9 7.8 10.1 10.2 10.3 10.4 9.6 8.9 8.3 7.8 7.3 6.9 6.5 6.2수주제한 (Not Available)

100 ≤t <120 9.3 8.0 7.0 9.1 9.2 9.3 9.3 8.6 8.0 7.5 7.0

Thickness(mm)

(5) Normalizing7) Marking 마킹

Marking (마킹)

Main Marking & Stamping 마킹 & 타각

Side Marking 측면마킹

1 제품번호 Plate No.

2 주문번호 Order No.

3 선급기관/규격 Register of shipping / Specification

4 제품치수 Dimension

5 납기 Delivery

6 Color 마킹 Color Marking

7 저장위치 Position

8 Bar Code

PA123456

1

D123456-01

2

NV-AH32

3

20.00X3048X9144

4

080852-001-50

5

W2

6

F324

7 8

Color Stroke Color Marking

Color : 3색 (Red, Yellow, White)

PA123456HYUNDAI STEEL

NV-AH32

20.00X3048X9144

SAMGHYUN STEEL

123T5206B4567V

제품번호 Plate No.

공급사명 Company Name

선급기관/규격 Register of shipping/Specification

제품치수 Dimension

수요가명 Customer Company Name

계약번호 Purchase Order No.

제품번호, HEAT 번호, 선급기관/규격(DIE STAMP)Plate No., Heat No., Register of shipping, Specification

PA123456 J0767∠ -AH32

TOP


160

7020 2500

120 121


20. Cold Rolled Stainless Steel Sheet, Coils & Strips 스테인리스 강판 및 강대

1) Product Standard 생산규격

SHEET

COIL

0.3mm ~

4.0mm

0.30.40.50.60.70.80.91.01.21.51.82.02.22.53.03.54.0

500mm~1,300mm

45mm~1,300mm

914mm : 3feet

1000mm : 1M

1219mm : 4feet

규정없음

1000mm~7500mm

COIL 단중：평균 1M/T ~ 4M/T (MAX 20M/T)COIL 내경：508mm, 610mm

외경：MAX 2,000mm (내경 Paper Spool 삽입시 2,200mm)

2000mm: 2M

2438mm: 8feet

3000mm: 3M

3048mm: 10feet

4000mm: 4M

No.1

No.2D

No.2B

No.4

No.8

HL

L-HL

SM

제품형상

Type

두께 Thickness 폭 Width 길이 Length

범위

Range범위

Range범위

Range표준

Regular표준

Regular표준

Regular

표면상태

Finish

2) Finish 표면사상

열간압연 후 열처리 및 산세처리 한 제품 표면

No.1 Reduced to a specified thickness by hot rolling only, annealed, and finally pickled or shot blasted for removal of scale.

No.2D 냉간압연 후 열처리 및 산세처리 한 제품 표면

A dully cold rolled finish produced by cold rolling, annealing and descaling. 냉간압연 후 열처리 및 산세처리 한 제품표면을 조질압면하여 형상과 광택을 개선한 제품

No.2B A bright cold rolled finish produced by final cold rolling, with brighter surface and is slightly harder than No. 2D finish. 2B의 제품을 #150~#180 연마벨트로 연마한 제품표면. No.3 보다 연마상태가 미려함

No.4 Uniformly polished with a polisher using a belt to which abrasives of #150 to 180 mesh are glued. 상당한 광택 및 반사기능을 가진 연마제품으로 #800 이상의 연마제로

No.8 Buff를 회전시켜 연마하여 만들어진 표면

No.7 finish products for further polishing with finer abrasives. HL No.4 제품 표면을 #150~180 입도의 연마벨트를 사용하여 연속된 연마무늬가 나타나도록 한 제품표면

(Hair Line)

Polished to #400 or so, and finished with emery power of #150 to 180 mesh to provide straight, parallel grit lines. No.4 제품표면을 #400 입도의 연마벨트를 사용하여 연속된 연마무늬가

L-HL 나타나도록 한 제품표면. HL보다 부드럽고 우아한 제품표면

(Light Hair Line) Polished to #400 or so, and finished with emery power of #400 mesh to provide straight, parallel grit lines. SM

No.8 보다 훨씬 상회하는 고광택표면으로 유리거울에 준하는 제품표면

(Super Mirror) Further polished than No.8

표면

Finishes제조방법

Applied Finishing Process용도

Application

공업용 Tank, 화학공업장치

Industrial tanks, Chemical Industry equipment공업용 Tank, 파이프

Industrial tanks, Pipe주방기구, 양식기, 건축자재

Kitchen ware, Flat ware, Hollow ware, Materials for building낙농공업설비, 주방기구

Food-processingfacilities, Kitchen ware반사경, 소형거울, 건축내외장재

Reflector, Mirror, Interior-Exterior decoration for building건축내외장재, 차량, 쇼케이스, Sash, Door

Most suitable for architectural purposes, Vehicles, Show case, Sash, Door

건축자재, 차량

Architectural purposes,vehicles

건축외장재, 거울

Exterior decoration for building, Mirror

3) Specification 생산강종

KS STS 304 0.08 1.00 2.00 0.045 0.030 18.00~20.00 8.00~10.50 - 205 520 40 187 90 200

JIS SUS 304 0.08 1.00 2.00 0.045 0.030 18.00~20.00 8.00~10.50 - 205 520 40 187 90 200

AISI AISI 304 0.08 1.00 2.00 0.045 0.030 18.00~20.00 8.00~10.50 - 205 520 40 202 92 -

DIN 1.4301 0.07 1.00 2.00 0.045 0.030 17.00~19.50 8.00~10.50 - 230 540/750 40 - - -

- HD D11 0.10 1.00 0.045 0.015 17.00~18.00 3.50~5.50 cu1.50~3.50 205 520 40 - 90 210 - HD D7S 0.12 1.00 0.045 0.030 17.00~18.00 2.00~4.00 cu1.50~3.50 205 520 40 - 95 220

KS STS 304L 0.03 1.00 2.00 0.045 0.030 18.00~20.00 9.00~13.00 - 175 480 40 187 90 200

JIS SUS 304L 0.03 1.00 2.00 0.045 0.030 18.00~20.00 9.00~13.00 - 175 480 40 187 90 200

AISI AISI 304L 0.03 1.00 2.00 0.045 0.030 18.00~20.00 8.00~12.00 - 170 485 40 183 88 -

DIN 1.4306 0.03 1.00 2.00 0.045 0.030 18.00~20.00 10.00~12.00 - 220 520/700 45 - - -

KS STS 304JI 0.08 1.70 3.00 0.045 0.030 15.00~18.00 6.0~9.0 cu1.0~3.00 155 450 40 187 90 200

JIS SUS 304JI 0.08 1.70 3.00 0.045 0.030 15.00~18.00 6.0~9.0 cu1.0~3.00 155 450 40 187 90 200

KS STS 316 0.08 1.00 2.00 0.045 0.030 16.00~18.00 10.00~14.00 2.00~3.00 205 520 40 187 90 200

JIS SUS 316 0.08 1.00 2.00 0.045 0.030 16.00~18.00 10.00~14.00 2.00~3.00 205 520 40 187 90 200

AISI AISI 316 0.08 1.00 2.00 0.045 0.030 16.00~18.00 10.00~14.00 2.00~3.00 205 520 40 217 95 -

DIN 1.4401 0.07 1.00 2.00 0.045 0.030 16.50~18.50 10.00~13.00 2.00~2.50 240 530/680 40 - - -

KS STS 316L 0.03 1.00 2.00 0.045 0.030 16.00~18.00 12.00~15.00 2.00~3.00 178 480 40 187 90 200

JIS SUS 316L 0.03 1.00 2.00 0.045 0.030 16.00~18.00 12.00~15.00 2.00~3.00 175 480 40 187 90 200

AISI AISI 316L 0.03 1.00 2.00 0.045 0.030 16.00~18.00 10.00~14.00 2.00~3.00 170 485 40 217 95 -

DIN 1.4404 0.03 1.00 2.00 0.045 0.015 16.50~18.50 10.00~13.00 2.00~2.50 240 530/680 40 - - -

- STS 409L 0.03 1.00 1.00 0.040 0.030 10.50~11.75 - - 175 360 25 162 80 175

- SUS 409L 0.03 1.00 1.00 0.040 0.030 10.50~11.75 - - 175 360 25 162 80 175

- STS 410 0.15 1.00 1.00 0.040 0.030 11.50~13.50 - - 205 450 20 183 88 200

- SUS 410 0.15 1.00 1.00 0.040 0.030 11.50~13.50 - - 205 450 20 183 88 200

AISI AISI 410 0.15 1.00 1.00 0.040 0.030 11.50~13.50 - - 205 450 20 217 95 -

DIN 1.4006 1.00 1.00 0.040 0.030 11.50~13.50 - - - 600 20 200 - -

KS STS 410L 0.030 1.00 1.00 0.040 0.030 11.00~13.50 - - 195 360 22 183 88 200

JIS SUS 410L 0.030 1.00 1.00 0.040 0.030 11.00~13.50 - - 195 360 22 183 88 200

KS STS 430 0.12 0.75 1.00 0.040 0.030 16.00~18.00 - - 250 450 22 183 88 200

JIS SUS 430 0.12 0.75 1.00 0.040 0.030 16.00~18.00 - - 250 420 22 183 88 200

AISI AISI 430 0.12 1.00 1.00 0.040 0.030 16.00~18.00 - - 250 450 22 183 - -

DIN 1.4016 0.08 1.00 1.00 0.040 0.030 16.00~18.00 - - 260 450~600 20 - - -

KS STS 436L 0.025 1.00 1.00 0.040 0.030 16.00~19.00 - 0.75~1.50 245 410 20 217 96 230

JIS STS 436L 0.025 1.00 1.00 0.040 0.030 16.00~19.00 - 0.75~1.50 245 410 20 217 96 230

304

D-Series

304L

304J1

316

316L

409L

*410

*410L

430

436L

KS(STS)

화학성분 Chemical Composition(wt%) 기계적 성질 Mechanical Properties

인장시험 Tensile Test(mm) 경도시험 Hardness Test(Max)규격

Stan-dards

기호

Symbol C (max)

Si (max)

Mn (max)

P (max)

S(max) Cr Ni Mo Y/S T/S EL

N/mm2 N/mm2 (%) HB HRB HV

0.08~0.15

5.50 ~7.505.00 ~7.00

Note : *는 별도주문판매 (These sizes indicated by an asterisk(*) are not included in regular rolling schedules.)

스테인리스

강판

및

강대

(Cold Rolled Stainless Steel Sheets, Coil & Strips)

스테인리스

강판

및

강대


122 123


[표2] 치수단위(Unit) : mm

0.30 ≤ t ＜ 0.40 ±0.025 ±0.030 ±0.035 ±0.035 ±0.038 ±0.038

0.40 ≤ t ＜ 0.60 ±0.035 ±0.040 ±0.040 ±0.040 ±0.040 ±0.040

0.60 ≤ t ＜ 0.80 ±0.040 ±0.045 ±0.045 ±0.045 ±0.05 ±0.05

0.80 ≤ t ＜ 1.00 ±0.040 ±0.05 ±0.05 ±0.05 ±0.05 ±0.06

1.00 ≤ t ＜ 1.25 ±0.05 ±0.05 ±0.05 ±0.06 ±0.06 ±0.07

1.25 ≤ t ＜ 1.60 ±0.05 ±0.06 ±0.06 ±0.06 ±0.07 ±0.08

1.60 ≤ t ＜ 2.00 ±0.06 ±0.07 ±0.08 ±0.08 ±0.09 ±0.10

2.00 ≤ t ＜ 2.50 ±0.07 ±0.08 ±0.09 ±0.09 ±0.10 ±0.11

2.50 ≤ t ＜ 3.15 ±0.08 ±0.09 ±0.09 ±0.10 ±0.11 ±0.12

3.15 ≤ t ＜ 4.00 ±0.09 ±0.10 ±0.10 ±0.11 ±0.12 ±0.13

폭 Width

두께 Thickness

두께허용차 Tolerance of Thickness

w ＜ 160 160≤w＜250 250≤w＜400 400≤w＜630 630≤w＜1000 1000≤w＜1250

(2) Width 폭

지정이 없는한 강대(대강포함)에 대해서는 [표3], 강판에 대해서는 [표4]에 따릅니다.특별히 지정이 있는 경우에는 [표5]에 따릅니다.

•In case of Coil applies in table 3.•In case of Sheet applies in table 4.•Special requirement applies in table5.

[표3] 치수단위(Unit) : mm [표4] 치수단위(Unit) : mm

Mill Edge +10 +20 +25 +30 0 0 0 0

Cut Edge +5 +5 +5 +5 0 0 0 0

폭 Width

Edge

폭 허용차 Tolerance of Width

w＜400 400≤w＜630 630≤w＜1000 1000≤w＜1300

L ≤ 3500 +10, 0

3500 ＜ L ≤ 6000 +15, 0

6000 ＜ L +20, 0

길이

Length

폭 허용차

Tolerance of Width

t ＜ 0.60 ± 0.15 ± 0.20 ± 0.25 ± 0.30 ± 0.50

0.60 ≤ t ＜ 1.00 ± 0.20 ± 0.25 ± 0.25 ± 0.30 ± 0.50

1.00 ≤ t ＜ 1.60 ± 0.20 ± 0.30 ± 0.30 ± 0.40 ± 0.60

1.60 ≤ t ＜ 2.50 ± 0.25 ± 0.35 ± 0.35 ± 0.50 ± 0.70

2.50 ≤ t ＜ 4.00 ± 0.30 ± 0.40 ± 0.40 ± 0.50 ± 0.80

폭 Width

두께 Thickness

폭 허용차 Tolerance of Width

w＜160 160≤w＜250 250≤w＜400 400≤w＜630 630≤w＜1000

[표5] 치수단위(Unit) : mm

4) Packing Type 포장

5) Tolerance of Dimension 치수허용차

내수 COIL(Domestic)

수출 COIL(Export )

SHEET

(1) Type 외형

(2) Packing Weight 포장단충

Sheet 1,000~2,000 -

Coil 3,000~7,000 15,000

구분 Type 통상 Normal 최대 Max

치수단위(Unit) : kg

(1) Thickness 두께허용차

지정이 없는 한 [표1]에 따릅니다. 특별히 지정이 있는 경우에는 [표2]에 따릅니다. 단, 두께측정 위치는 가장자리부터 Mill Edge는 25mm이상, Cut Edge는 15mm이상 내측의 임의의 점으로 합니다.

•Normal tolerance applies in table 1, special tolerance applies in table 2.•In case of Mill Edge, measuring point is over 25mm from the edge.•In case of Cot Edge, measuring point is over 15mm from the edge.

[표1]

0.30 ≤ t ＜ 0.60 ± 0.05 ± 0.08

0.60 ≤ t ＜ 0.80 ± 0.07 ± 0.09

0.80 ≤ t ＜ 1.00 ± 0.09 ± 0.10

1.00 ≤ t ＜ 1.25 ± 0.10 ± 0.12

1.25 ≤ t ＜ 1.60 ± 0.12 ± 0.15

1.60 ≤ t ＜ 2.00 ± 0.15 ± 0.17

2.00 ≤ t ＜ 2.50 ± 0.17 ± 0.20

2.50 ≤ t ＜ 3.15 ± 0.22 ± 0.25

3.15 ≤ t ＜ 4.00 ± 0.25 ± 0.30

4.00 ≤ t ＜ 5.00 ± 0.35 ± 0.40

폭 Width

두께 Thickness

두께허용차 Tolerance of Thickness

w ＜ 1250 1250 ≤ w ≤ 1300

치수단위(Unit) : mm

스테인리스

강판

및

강대


스테인리스

강판

및

강대


124 125


6) STS Cold Rolled Sheet Counter Table Per Thickness 스테인리스 냉연 SHEET 포장조견표

환산중량 단 중 : KS D 3695 기준 1매 중량 : 비중 x 두께 x 폭 x 길이(유효숫자 3자리 맺음)One sheet weight : gravity x thickness x width x length

0.3 4.76 210 7.14 140 9.52 105 7.43 135 3.98 251 7.08 141 8.85 113 4.62 216 6.88 145 4.70 213 6.99 143

0.4 6.34 158 9.52 105 12.69 79 9.91 101 5.31 188 9.44 106 11.80 85 6.16 162 9.17 109 6.27 159 9.32 107

0.5 7.93 126 11.90 84 15.86 63 12.39 81 6.64 151 11.80 85 14.75 68 7.70 130 11.46 87 7.84 128 11.65 86

0.6 9.52 105 14.27 70 19.03 53 14.87 67 7.96 126 14.16 71 17.70 56 9.24 108 13.75 73 9.41 106 13.98 72

0.7 11.10 90 16.65 60 22.20 45 17.35 58 9.29 108 16.52 61 20.66 48 10.78 93 16.04 62 10.98 91 16.31 61

0.8 12.69 79 19.03 53 25.38 39 19.83 50 10.62 94 18.88 53 23.61 42 12.32 81 18.34 55 12.54 80 18.64 54

0.9 14.27 70 21.41 47 28.55 35 22.30 45 11.94 84 21.25 47 26.56 38 13.86 72 20.63 48 14.11 71 20.97 48

1.0 15.86 63 23.79 42 31.72 32 24.78 40 13.27 75 23.61 42 29.51 34 15.40 65 22.92 44 15.68 64 23.30 43

1.2 19.03 53 28.55 35 38.06 26 29.74 34 15.93 63 28.33 35 35.41 28 18.48 54 27.51 36 18.82 53 27.96 36

1.5 23.79 42 35.69 28 47.58 21 37.17 27 19.91 50 35.41 28 44.26 22 23.10 43 34.38 29 23.52 43 34.95 29

2.0 31.72 32 47.58 21 63.44 16 49.56 20 26.54 37 47.21 21 59.02 17 30.80 32 45.84 22 31.36 32 46.60 21

2.5 39.65 25 59.48 17 79.30 13 61.95 16 33.18 30 59.02 17 73.77 14 38.50 26 57.30 17 39.20 26 58.25 17

3.0 47.58 21 71.37 14 95.16 11 74.34 13 39.81 25 70.82 14 88.52 11 46.20 22 68.76 15 47.04 21 69.90 14

3.5 55.51 18 83.27 12 111.02 9 86.73 12 46.47 21 82.62 12 103.28 10 53.90 18 80.22 12 54.88 18 81.55 12

304 430 HD D-11(D-7s)

1000x2000

kg/매 매/톤

강종Steel

Group규격

Designation단위Unit두께

Thickness(mm)

1000x3000

kg/매 매/톤

1000x4000

kg/매 매/톤

1250x2500

kg/매 매/톤

1000x2000

kg/매 매/톤

1000x2000

kg/매 매/톤

3’x6’1250x2500

kg/매 매/톤

4’x8’1219x2438

kg/매 매/톤

4’x10’1219x3048

kg/매 매/톤

4’x8’1219x2438

kg/매 매/톤

1219x2438

kg/매 매/톤

(3) Length 길이 치수단위(Unit) : mm

길이 허용차 +10 +15 +30 Tolerance of Length 0 0 0

길이 Length ≤ 3500 3500 ＜ L ≤ 6000 6000 ＜

(4) Flatness(Sheet) 평탄도(강판) 치수단위(Unit) : mm

≤ 1000

≤ 2000 15

2000 ＜ 20

1000 ＜

≤ 2000 20

2000 ＜ 20

폭 Width 길이 Length 평탄도 Max

(5) Camber(Coil) 가로휨(강대：대강포함) 치수단위(Unit) : mm

40 ≤ - 80 ＜ 임의의 길이 2000에 대해 8 (8 in any 2000)

80 ≤ - 630 ＜ 임의의 길이 2000에 대해 4 (4 in any 2000)

630 ≤ 임의의 길이 2000에 대해 2 (2 in any 2000)

단, 압연의 처음과 끝의 불안정부분에는 적용하지 않습니다.

Unstable portion of strip(top, end) is not applied.

폭 Width 가로휨 Max

8) Gravity 강종별 비중

7) STS Hot Rolled Sheet Table Per Thickness 스테인리스 열연 SHEET 포장 조견표

kg/매 31.72 47.58 63.44 26.52 47.14 58.94 30.80 45.77 31.00

2.0 매/톤 32 21 16 38 21 17 32 32 32 중량 Weight(kg) 1,015 999 1,015 1,008 990 1,002 986 1,007 992

kg/매 39.66 59.49 79.32 33.16 58.93 73.69 38.50 57.21 38.76

2.5 매/톤 25 17 13 30 17 14 26 17 26 중량 Weight(kg) 992 1,011 1,031 995 1,002 1,032 1,001 973 1,008

kg/매 47.58 71.37 95.16 39.78 70.70 88.40 46.20 68.65 46.50

3.0 매/톤 21 14 11 25 14 11 22 15 22 중량 Weight(kg) 999 999 1,047 995 990 972 1,016 1,030 1,023

kg/매 55.52 83.28 111.04 46.41 82.50 103.16 53.90 80.10 54.26

3.5 매/톤 18 12 9 22 12 10 19 12 18 중량 Weight(kg) 999 999 999 1,021 990 1,032 1,024 961 977

kg/매 63.44 95.16 126.88 53.04 94.27 117.87 61.60 91.54 62.00

4.0 매/톤 16 11 8 19 11 8 16 11 16 중량 Weight(kg) 1,015 1,047 1,015 1,008 1,037 943 986 1,007 992

kg/매 79.30 118.65 158.60 66.29 117.84 147.34 77.00 114.42 77.50

5.0 매/톤 13 8 6 15 8 7 13 9 13 중량 Weight(kg) 1,031 952 952 994 943 1,031 1,001 1,030 1,008

kg/매 95.16 142.74 190.32 79.55 141.41 176.81 92.40 137.31 93.00

6.0 매/톤 11 7 5 13 7 6 11 7 11 중량 Weight(kg) 1,047 999 952 1,034 990 1,061 1,016 961 1,023

kg/매 111.02 166.53 222.04 92.81 164.98 206.28 107.80 160.19 108.50

7.0 매/톤 9 6 5 11 6 5 9 6 9 중량 Weight(kg) 999 999 1,110 1,021 990 1,031 970 961 977

kg/매 126.88 190.32 253.76 107.07 188.54 235.74 123.20 183.08 124.00

8.0 매/톤 8 5 4 9 5 4 8 5 8 중량 Weight(kg) 1,015 952 1,015 955 955 943 986 915 992

304 430 410

1000x2000

강종Steel Group

단위 Unit

규격Designation

두께Thick-ness(mm)

1000x3000 1000x4000 1000x20003’x6’

914x18294’x8’

1219x24384’x10’

1219x30484’x8’

1219x2438 1000x2000

7.93 STS 304, 304L, 321, 301L, 302, 305, 631, HD 202

7.98 STS 316, 316L, 310S, 347, 317, 317L

7.84 STS HD D-11(HD D-7s)

7.70 STS 430, 429L, 434, 440A, 436L, 439L, 430J1L

7.75 STS 410, 420J1, 405, 410L, 409L, 444, 420J2

기본무게(比重) 적용강종 Grade

치수단위(Unit) : kg/mm.m2

Note : *는 별도주문판매 (These sizes indicated by an asterisk(*) are not included in regular rolling schedules.)

스테인리스

강판

및

강대


스테인리스

강판

및

강대


126 127


9) Corrosion Resistance of Stainless Steel 스테인리스강의 내식성

5% 20°C A A A A

질 산 20% 20°C A A A A

(HNO3) 50% 비등 (Boiling) A A - A

농후액 (Concentration liquid) 비등 (Boiling) D D E D

5% 20°C C B - C

5% 비등 (Boiling) E C - E

황 산 50% 20°C D C - -

(H2SO4) 50% 비등 (Boiling) E D - E

농후액 (Concentration liquid) 20°C A A - A

비등 (Boiling) D D - D

염 산 (HCI) 20°C E E E E

1% 20°C ++A ++A A A

인 산

5% 20°C A A A A

(Phosphoric acid)

10% 20°C C A D D

수 산 5% 20°C~비등 (Boiling) A A B A

(Oxalic acid) 10% 비등 (Boiling) D C - -

5~10% 20°C A A A A

초 산 20~100% 20°C A A C B

(Acetic acid) 50% 비등 (Boiling) C B - -

의 산 (Formic acid) 5% 20°C~60°C B A C D

5% 20°C A A C B

유 산 5% 65°C B A C B

(Lactic acid)

10% 비등 (Boiling) B A - -

낙 산 (Butryc acid) 5% 20°C~65°C A A A A

구 연 산 5% 20°C~65°C A A A A

(Citric acid) 15% 비등 (Boiling) A A - B

크 롬 산 5% 20°C A A - B

(Chromic acid) 10% 비등 (Boiling) C B - D

요 드 (Iodine) E D - E

불 소 (Fluorine) 20°C E E E E

염소 가스 건조 (Drying) 20°C C B - C

(Cl gas) 습기함유 (Moisture) 20°C D C - D

취 소 수 (Bromine water) 20°C E D - E

이황화탄소 (Carbon disulfide CS2) 20°C A A - A

사염화탄소 순수 (Purity) 20°C A A - A

(Carbon chloride CCl4) 5%~10% 20°C C B D C

시험용액

Solution농 도

Concentration온 도

Temperature STS304 STS316 STS410 STS430

석탄산 (Phenol) 20°C A A - A

주석산 (Tartaric acid) 20°C A A C C

오레인산 (Oleic acid) 20°C A A - B

암모니아수 (Ammonia water) 20°C A A - A

암모니아가스 (Ammonia gas) 50°C - D - D

수산화칼슘 10%~20% 비등 (Boiling) A A - -

(Calcium hydroxide) 50% 비등 (Boiling) C B - -

카세인소다 (Casein sodium) A A - A

탄화소다 (Carbon sodium) 5% 20°C~65°C A A A A

중탄화소다 (CO3 sodium) 20°C A A A A

치오황산소다 (Sodium thiosulfate) 5%~10% 20°C~65°C A A - C

황산암모니아 (Sulfuric acid ammonia) 1%~5% 20°C A A B A

황화나트륨 (Sodium sulfide) 5%~20% 20°C~65°C *A A *B *B

포화 (Saturation) 비등 (Boiling) B A - -

염화아연 (Zinc chloride) 5% 20°C *A *A - *A

황산아연 (Zinc sulfate) 5%~포화 (Saturation) 20°C A A - A

염화제2철 (FeCl3) 1% 20°C ++*B *A C *B

5% 20°C ++*D *C D *D

에칠알코올 (Ethanol) 20°C~비등 (Boiling) A A - A

메칠알코올 (Methyl) 20°C A A - A

65°C *C B - C

탄산수 (Carbonated water) A A A A

식 초 (Vinegar) 20°C *A A A A

해 수 (Seawater) *A *A - *C

밀 크 (Milk) 65°C A A B A

당 밀 (Syrup) A A - A

휘발유 (Benzine) A A A A

쥬 스 (Juice) A A A A

마요네즈 (Mayonnaise) 20°C *A A - -

글리세린 (Glycerine) A A A A

켓 찹 (Ketchup) 20°C *A A *A *A

커 피 (Coffee) 비등 (Boiling) A A A A

맥 주 (Beer) A A -

시험용액

Solution농 도

Concentration온 도

Temperature STS304 STS316 STS410 STS430

(注) A：충분한 내식성 0.0089mm/월 이하 B：만족할 정도의 내식성 0.0089~0.089mm/월

C：상당한 정도의 내식성 0.089~0.25mm/월 D：소량의 내식성 0.25~0.89mm/월

E：내식성이 없음 0.89mm/월 이상 +：黃酸이 존재하면 부식되기 쉬운 것

++：鹽酸이 존재하면 부식되기 쉬운 것 *：방치하여 건조하면 공식(孔蝕)이 되기 쉬운 것

Note: Corrosion resistance A>B>C>D>E + : sulfuric acid corrosive conditions ++ : HCl corrosive conditions

* : Pitting possible danger

스테인리스

강판

및

강대


스테인리스

강판

및

강대


128 129


A 0523/29T

A 06N30/40T

A 07N40/50T

A 0865T

A 0980T

23.6~30.6T 32.0~40.5T 41.5~54.1T 64.1~75.0T 75.0~85.0T

Body Hot Top Total Body HotTop Total Body Hot Top Total Body Hot Top Total Body Hot Top Total

19,760 3,880 23,640 26,712 5,288 32,000 34,646 6,804 41,450 54,540 9,510 64,050 62,250 12,750 75,000

83.6 16.4 100 83.5 16.5 100 83.6 16.4 100 85.2 14.8 100 83.0 17.0 100

20,776 4,074 24,850 28,385 5,595 33,980 35,701 7,019 42,720 54,540 11,000 65,540 65,588 14,412 80,000

83.6 16.4 100 83.5 16.5 100 83.6 16.4 100 83.2 16.8 100 82.0 18.0 100

21,894 4,316 26,210 29,202 5,718 34,920 36,636 7,234 43,870 58,450 11,550 70,000 69,700 15,300 85,000

83.5 16.5 100 83.6 16.4 100 83.5 16.5 100 83.5 16.5 100 82.0 18.0 100

22,922 4,488 27,410 29,987 5,873 35,860 37,743 7,387 45,130 62,250 12,750 75,000 73,800 16,200 90,000

83.6 16.4 100 83.6 16.4 100 83.6 16.4 100 83.0 17.0 100 82.0 18.0 100

23,966 4,734 28,700 30,604 6,016 36,620 38,637 7,563 46,200 77,900 17,100 95,000

83.5 16.5 100 83.6 16.4 100 83.6 16.4 100 82.0 18.0 100

25,180 4,980 30,160 31,719 6,231 37,950 39,534 7,826 47,360

83.5 16.5 100 83.6 16.4 100 83.5 16.5 100

25,518 5,042 30,560 32,674 6,446 39,120 40,508 8,002 48,510

83.5 16.5 100 83.5 16.5 100 83.5 16.5 100

33,859 6,661 40,520 42,446 8,354 50,800

83.6 16.4 100 83.6 16.4 100

43,290 8,530 51,820

83.5 16.5 100

44,024 8,706 52,730

83.5 16.5 100

45,208 8,882 54,090

83.6 16.4 100

Mould Type

A 016/9T

A 0210/13T

A 0314/17T

A 0418/22T

Weight 6.9~9.4T 11.0~13.6T 14.6~17.2T 17.9~22.7T

Variation㎏ Body Hot Top Total Body Hot Top Total Body Hot Top Total Body Hot Top Total

%

a㎏ 6,037 863 6,900 9,312 1,708 11,020 12,303 2,257 14,560 15,103 2,877 17,980

% 87.5 12.5 100 84.5 15.5 100 84.5 15.5 100 84.0 16.0 100

b㎏ 6,716 1,004 7,720 9,836 1,804 11,640 12,861 2,359 15,220 15,691 2,989 18,680

% 87.0 13.0 100 84.5 15.5 100 84.5 15.5 100 84.0 16.0 100

c㎏ 7,525 1,125 8,650 10,199 1,871 12,070 13,360 2,450 15,810 16,187 3,083 19,270

% 87.0 13.0 100 84.5 15.5 100 84.5 15.5 100 84.0 16.0 100

d㎏ 7,847 1,173 9,020 10,630 1,950 12,580 13,790 2,530 16,320 16,732 3,298 20,030

% 87.0 13.0 100 84.5 15.5 100 84.5 15.5 100 83.5 16.5 100

e㎏ 8,118 1,322 9,440 11,086 2,034 13,120 14,137 2,593 16,730 17,235 3,395 20,630

% 86.0 14.0 100 84.5 15.5 100 84.5 15.5 100 83.5 16.5 100

f㎏ 11,458 2,102 13,560 14,500 2,660 17,160 17,840 3,540 21,380

% 84.5 15.5 100 84.5 15.5 100 83.4 16.6 100

g㎏ 18,333 3,637 21,970

% 83.4 16.6 100

h㎏ 18,956 3,734 22,690

% 83.5 16.5 100

i㎏

%

j㎏

%

k㎏

%

21. Ingots for Forging 인고트

1) Available Ingot Size & Specification 제조범위

인고트 (ingots for Forging)


130 131


B 06M50T

B 07M60T

B 08M120T

B 09M150T

B 10M160T

45.1~54.1T 57.8~62.1T 100~140T 150/170/180T 160/180/190/200T


37,743 7,387 45,130 48,232 9,558 57,790 79,978 20,022 100,000 119,960 30,040 150,000 128,000 32,000 160,000

83.6 16.4 100 83.5 16.5 100 80.0 20.0 100 80.0 20.0 100 80.0 20.0 100

38,637 7,563 46,200 50,103 9,857 59,960 87,959 22,041 110,000 136,000 34,000 170,000 144,000 36,000 180,000

83.6 16.4 100 83.6 16.4 100 80.0 20.0 100 80.0 20.0 100 80.0 20.0 100

39,534 7,826 47,360 51,895 10,155 62,050 96,109 23,891 120,000 152,000 38,000 190,000

83.5 16.5 100 83.6 16.4 100 80.1 19.9 100 80.0 20.0 100

40,508 8,002 48,510 104,000 26,000 130,000 160,000 40,000 200,000

83.5 16.5 100 80.0 20.0 100 80.0 20.0 100

42,446 8,354 50,800 112,000 28,000 140,000

83.6 16.4 100 80.0 20.0 100

43,290 8,530 51,820

83.5 16.5 100

44,024 8,706 52,730

83.5 16.5 100

45,208 8,882 54,090

83.6 16.4 100

Mould Type

B 01M10T

B 02M15T

B 03M20T

B 04M30T

B 05M40T

Weight 11.0~14.6T 15.2~19.3T 20.0~26.2T 27.4~34.9T 35.9~43.9T

Variation㎏ Body Hot Top Total Body Hot Top Total Body Hot Top Total Body Hot Top Total Body Hot Top Total

%

a㎏ 9,312 1,708 11,020 12,861 2,359 15,220 16,732 3,298 20,030 22,922 4,488 27,410 29,987 5,873 35,860

% 84.5 15.5 100 84.5 15.5 100 83.5 16.5 100 83.6 16.4 100 83.6 16.4 100

b㎏ 9,836 1,804 11,640 13,360 2,450 15,810 17,235 3,395 20,630 23,966 4,734 28,700 30,604 6,016 36,620

% 84.5 15.5 100 84.5 15.5 100 83.5 16.5 100 83.5 16.5 100 83.6 16.4 100

c㎏ 10,199 1,871 12,070 13,790 2,530 16,320 17,840 3,540 21,380 25,180 4,980 30,160 31,719 6,231 37,950

% 84.5 15.5 100 84.5 15.5 100 83.4 16.6 100 83.5 16.5 100 83.6 16.4 100

d㎏ 10,630 1,950 12,580 14,137 2,593 16,730 18,333 3,637 21,970 25,518 5,042 30,560 32,674 6,446 39,120

% 84.5 15.5 100 84.5 15.5 100 83.4 16.6 100 83.5 16.5 100 83.5 16.5 100

e㎏ 11,086 2,034 13,120 14,500 2,660 17,160 18,956 3,734 22,690 26,712 5,288 32,000 33,859 6,661 40,520

% 84.5 15.5 100 84.5 15.5 100 83.5 16.5 100 83.5 16.5 100 83.6 16.4 100

f㎏ 11,458 2,102 13,560 15,103 2,877 17,980 19,760 3,880 23,640 28,385 5,595 33,980 34,646 6,804 41,450

% 84.5 15.5 100 84.0 16.0 100 83.6 16.4 100 83.5 16.5 100 83.6 16.4 100

g㎏ 12,303 2,257 14,560 15,691 2,989 18,680 20,776 4,074 24,850 29,202 5,718 34,920 35,701 7,019 42,720

% 84.5 15.5 100 84.0 16.0 100 83.6 16.4 100 83.6 16.4 100 83.6 16.4 100

h㎏ 16,187 3,083 19,270 21,894 4,316 26,210 36,636 7,234 43,870

% 84.0 16.0 100 83.5 16.5 100 83.5 16.5 100



132 133


C 057.7T

C 51H10/13T

C 52H14/17T

C 53H30/40T

C 54H40/50T

7.7T 11.0~13.6T 14.6~17.2T 30.6~41.5T 42.7~50.8T


6,560 1,160 7,720 9,312 1,708 11,020 12,303 2,257 14,560 25,518 5,042 30,560 35,701 7,019 42,720

85.0 15.0 100 84.5 15.5 100 84.5 15.5 100 83.5 16.5 100 83.6 16.4 100

9,836 1,804 11,640 12,785 2,435 15,220 26,712 5,288 32,000 36,636 7,234 43,870

84.5 15.5 100 84.0 16.0 100 83.5 16.5 100 83.5 16.5 100

10,199 1,871 12,070 13,280 2,530 15,810 28,385 5,595 33,980 37,743 7,387 45,130

84.5 15.5 100 84.0 16.0 100 83.5 16.5 100 83.6 16.4 100

10,630 1,950 12,580 13,709 2,611 16,320 29,202 5,718 34,920 38,637 7,563 46,200

84.5 15.5 100 84.0 16.0 100 83.6 16.4 100 83.6 16.4 100

11,086 2,034 13,120 14,053 2,677 16,730 29,987 5,873 35,860 39,534 7,826 47,360

84.5 15.5 100 84.0 16.0 100 83.6 16.4 100 83.5 16.5 100

11,458 2,102 13,560 14,414 2,746 17,160 30,604 6,016 36,620 40,508 8,002 48,510

84.5 15.5 100 16.0 100 83.6 16.4 100 83.5 16.5 100

31,719 6,231 37,950 42,446 8,354 50,800

83.6 16.4 100 83.6 16.4 100

32,674 6,446 39,120

83.5 16.5 100

33,859 6,661 40,520

83.6 16.4 100

34,646 6,804 41,450

83.6 16.4 100

Mould Type

C 012.7T

C 024T

C 034.7T

C 046.3T

Weight 2.7T 4.0T 4.7T 6.3T

Variation㎏ Body Hot Top Total Body Hot Top Total Body Hot Top Total Body Hot Top Total

%

a㎏ 2,302 398 2,700 3,400 600 4,000 3,971 679 4,650 5,337 913 6,250

% 85.3 14.7 100 85.0 15.0 100 85.4 14.6 100 85.4 14.6 100

b㎏

%

c㎏

%

d㎏

%

e㎏

%

f㎏

%

g㎏

%

h㎏

%

i㎏

%

j㎏

%

2) Applicable Material Spec. of Ingot

G4051 : S10C ~ S55C AISI 1010 ~ 1055

G3201 : SF35 ~ SF60 A668

CARBON STEEL G3202 : SFVC1 ~ SFVC2 A105/A105M

G3205 : SFL1 ~ SFL2 A350

Description JIS ASTM

G4105 : SCM415 ~ SCM822

AISI 4130 ~ 4147

G4103 : SNCM220 ~ SNCM447 AISI 8615 ~ 8640

Low Alloy Steel G4104 : SCr415 ~ SCr445

AISI 4320 ~ 4340

G3203 : SFVA F1 ~ SFVA F11 AISI 5120 ~ 5140

A182

Description JIS ASTM



134 135


제품

Product

표준 외형

Type of Stand

롤 외형 Type of Roll

Indefinite Chill Ductile Cast

Steel Adamite High Chromium High Speed Steel

ISH DA SHDDC,DD,DE,DF,

DG

DCH,DDH,DEH,DFH

DGH

SPSQ

ASAG

APAQ

GADGS

AQSHSV HCV

HCMVHCR TVN

Slabs 40/50 35/45 35/45

Blooms 40/50 35/45 40/50

Plate

2and 3high Roughing 65/75 45/55Finishing 70/80

4High Roughing Work Roll 70/80 45/55 65/75Finishing Work Roll 70/80 65/75Back-Up Roll

WideStrip광폭열연

Continuous Scale Breakers 35/45 35/45Roughing Work Roll 45/55 45/55 65/75 60/70 75/85Front StandsFinishing Work Roll 75/85 75/85 75/85

Rear Stands Finishing Work Roll 65/75 50/60 70/80 75/85

Back-Up Roll

Edging 50/60 45/55Reversing 2High Roughing 45/55

4High Roughing 45/55 70/80 70/80 75/85Finishing 65/85 70/80 75/85Back-Up Roll

Sheet열연

2and 3high Roughing 40/50 35/45Finishing 75/85

Skin Pass & Temper

2High, 4High Work Roll 75/85 85/954High Back-Up Roll 70/85 70/80

Billets / Sheet Bar 평철

2HighContinuous

Roughing 45/55 45/55 35/45 40/50 40/50Intermediate 50/60 45/55 45/55Finishing 55/65 35/45

Beams

Universal Horizontal Roughing 45/55 35/45 50/75Horizontal Finishing 45/55 55/65 50/75Horizontal Edging 50/60 50/60Vertical 50/65 50/75 70/80

Heavy Sections 대형강

2and 3high Roughing 45/55 45/55 45/55 35/45 45/55Intermediate 50/60 45/55 45/55Finishing 55/65 50/60 45/60

Medium Sections 중형강

2and 3high Roughing 45/55 45/55 45/55 45/55Intermediate 50/60 50/60 50/60 45/55Finishing 55/65 55/65 50/60 45/60 60/70

Light Section 소형강

2and 3high Roughing 45/55 50/55 45/55 45/55Intermediate 55/65 55/65Finishing 60/70 60/70 65/75

Rod 선재

2and 3high Roughing 45/55 50/60 45/55Intermediate 55/65 60/70Finishing 70/80 60/70 65/75

롤 (Rolls)

중기 (H

eavy Machinery)

23. Heavy Machinery 중기

1) Track Link Assembly 치수단위(Unit) : mm

22. Rolls 롤


135.0

154.0 160.0

171.5

175.0

175.4

190.0

202.8

203.2

215.9

216.0

228.6

KU135A 41.0 46.0 64.0 94.0 35.1 35.5 65.0 40.0 0.6 85.0 120.2 22.1 123.0 13.5

KU135B 42.4 43.4 72.0 99.0 39.0 36.0 70.0 48.0 0.4 102.0 134.4 22.3 140.0 13.2

KU135C 40.0 46.0 80.0 104.0 35.0 36.0 67.0 53.6 1.0 104.0 136.0 22.3 140.0 13.5

KU135E 42.4 43.4 65.0 92.0 39.0 36.0 70.0 40.0 0.9 95.0 127.4 23.0 133.0 12.3

KU154A 44.0 57.0 73.0 89.0 41.3 40.5 74.0 45.0 1.2 101.1 125.0 24.1 131.0 14.2

KU160A 52.0 56.0 99.0 99.0 45.3 46.0 83.0 66.0 1.0 130.5 152.0 30.0 157.0 14.8

KU171A 55.2 60.3 108.0 108.0 53.8 53.5 94.5 72.2 1.2 135.2 178.6 36.6 183.0 16.2

KU171B 56.4 58.7 125.4 144.5 54.0 58.8 101.6 90.5 0.6 168.0 203.3 36.7 206.4 16.1

KU171F 55.6 60.3 107.9 107.9 50.6 50.0 90.0 70.5 0.6 135.1 171.9 33.6 178.0 16.4

KU171H 55.6 60.3 107.9 107.9 50.4 49.5 89.0 72.9 1.0 135.6 168.9 33.5 175.0 16.2

KU175F 54.0 57.0 86.4 102.4 50.2 49.0 90.0 52.4 1.2 117.5 162.0 32.0 173.0 16.3

KU175A 57.3 58.7 125.4 144.5 58.8 60.2 103.2 82.0 0.6 165.3 209.2 36.6 212.0 18.1

KU190B 58.0 62.0 124.4 160.4 59.0 58.0 105.0 82.8 1.2 170.4 205.2 38.0 213.2 20.3

KU190C 58.0 69.0 119.6 155.6 58.7 60.0 106.0 82.6 1.5 167.7 201.6 36.6 207.0 20.8

KU190E 58.0 62.0 124.4 160.4 59.0 58.0 105.0 83.0 1.4 170.2 215.8 37.7 220.0 20.2

KU190G 58.0 62.0 124.4 160.4 59.0 57.0 104.0 82.8 0.6 163.6 207.0 38.0 212.0 18.2

KU190J 58.0 62.0 124.4 160.4 59.0 58.0 105.0 84.8 1.2 169.8 207.0 38.0 212.0 20.3

KU190L 58.0 62.0 124.4 160.4 59.0 57.0 104.0 82.8 0.6 163.6 207.0 38.0 212.0 20.2

KU203D 62.0 72.0 129.0 179.0 64.0 64.0 115.0 92.0 1.5 185.3 226.0 42.0 230.0 21.0

KU203A 58.0 72.2 138.4 178.4 66.7 64.0 116.4 100.8 0.8 189.0 237.4 44.5 245.0 20.2

KU203C 58.0 72.2 138.4 178.4 66.7 64.0 116.4 100.8 0.8 193.8 237.4 44.5 245.0 20.2

KU203G 58.0 72.2 138.4 178.4 66.9 64.0 116.0 102.0 1.4 191.5 230.8 44.7 242.0 20.2

KU216B 64.3 76.2 146.0 184.0 71.0 70.0 129.0 108.5 1.5 201.1 245.1 47.0 252.0 22.3

KU216D 69.0 76.0 140.0 190.0 67.9 68.4 124.0 100.7 1.5 200.8 241.7 46.0 246.5 23.0

KU216L 64.3 76.2 146.1 184.2 71.4 70.0 125.5 107.3 1.4 200.2 245.9 47.7 254.0 23.2

KU216E 63.0 76.2 140.4 178.4 66.5 64.0 116.0 102.0 1.4 191.6 233.6 44.6 242.0 22.3

KU216H 63.0 76.2 140.4 178.4 66.5 64.0 116.0 102.0 1.4 191.6 233.6 44.6 242.0 22.3

KU216K 63.0 76.2 140.4 178.4 66.5 64.0 116.0 102.0 1.4 191.6 233.6 44.6 242.0 22.3

KU216M 63.0 76.2 140.4 178.4 66.9 64.0 116.0 102.0 1.4 191.6 233.6 44.7 242.0 22.3

KU216N 64.3 76.2 146.0 184.0 71.4 70.0 129.0 103.1 1.2 203.2 246.3 47.0 252.0 24.3

KU216P 63.0 76.2 140.4 178.4 66.5 64.0 116.0 102.0 1.4 191.6 233.6 44.6 242.0 22.3

KU228B 71.4 76.2 149.2 200.0 73.3 70.0 129.0 104.0 1.5 213.5 257.0 48.8 264.0 24.3

KU228C 71.4 76.2 144.0 184.0 71.0 70.0 129.0 106.0 1.4 202.2 248.2 47.0 252.0 24.3

KU228D 71.4 76.2 144.0 184.0 71.0 70.0 129.0 106.0 1.4 202.2 243.2 47.0 252.0 24.3

홀간 거리Pitch (A)

제품명 Model Name

표준단면치수 Dimensions

B C D E F() G H I K L M N() Q R()

136 137


중기 (H

eavy Machinery)

ｺ

Remarks

C + + ≤ 0.50%+Mn6

Cu+Ni15

Cr+V+Mo5

C + + ≤ 0.63%+Mn6

Cu+Ni15

Cr+V+Mo5

C + + ≤ 0.51%

Plain Round Steel Bar Bs4449 Deformed high yield steel bar.

+Mn6

Cu+Ni15

Cr+V+Mo5

Chemical Composition(Ladle Analysis) 강재성분표

SS 400 - - - 0.050 0.050

SS 490 - - - 0.050 0.050 KS D 3503

SS 540 0.30 max. - 1.60 max. 0.040 0.040

SM 400A 0.23 max. - 2.5 x Cmin. 0.035 0.035

SM 400B 0.20 max. 0.35 max. 0.60-1.40 0.035 0.035

SM 490A 0.20 max. 0.55 max. 1.60 max. 0.035 0.035

SM 490B 0.18 max. 0.55 max. 1.60 max. 0.035 0.035 KS D 3515

SM 490YA 0.20 max. 0.55 max. 1.60 max. 0.035 0.035

SM 490YB 0.20 max. 0.55 max. 1.60 max. 0.035 0.035

SM 520B 0.20 max. 0.55 max. 1.60 max. 0.035 0.035

SHN490 0.20 max. 0.40 max. 0.50~1.50 max. 0.035 0.030 KS D 3866

SD 300 - - - 0.05 0.05 KS D 3504

SD 350 - - - 0.05 0.05

SD 400 - - - 0.05 0.05

SD 500 - - - 0.05 0.05 일반용철근

SD 600 - - - 0.05 0.05

SD 700 - - - 0.05 0.05

SD 400W 0.22 max. 0.60 max. 1.60 max. 0.05 0.05

용접용철근

SD 500W (0.24 max.) (0.65 max.) (1.7 max.) (0.055) (0.055)

SD 295A - - - 0.050 0.050 JIS G 3112

SD 295B 0.27 max. 0.55 max. 1.50 max. 0.040 0.040

SD 345 0.27 max. 0.55 max. 1.60 max. 0.040 0.040

SD 390 0.29 max. 0.55 max. 1.80 max. 0.040 0.040

SD 490 0.32 max. 0.55 max. 1.80 max. 0.040 0.040

Grade 40 - - - 0.060 - ASTM A615

Grade 60 - - - 0.060

Grade 460 0.25 max. - - 0.050 0.050

Grade 460B 0.25 max. - - 0.050 0.050

Grade B500B 0.22 max. - - 0.050 0.050

30A 0.50-0.70 0.10-0.35 0.60-0.95 0.045 0.050

37A 0.55-0.70 0.10-0.35 0.60-0.95 0.045 0.050

50PS 0.60-0.75 0.10-0.35 0.60-0.95 0.045 0.050 KS R 9106

40N, 50N 0.63-0.75 0.15-0.30 0.70-1.10 0.030 0.025

60 0.63-0.75 0.15-0.30 0.70-1.10 0.030 0.025

60K 0.68-0.80 0.15-0.58 0.70-1.20 0.025 0.025

명칭

Designation

일반구조용 압연강재Rolled Steelfor General Structure

용접구조용

압연강재 Rolled Steel for Welded Structure

철도레일

Railway Rails

철근

콘크리트용

봉강

Steel Bars for concrete Reinforcement

종류의 기호

Symbol

화학성분

Chemical Composition(%)

C Si Mn P.max. S.max.

비고

Remarks

2) Track Shoe 트랙슈(Triple Grouser)

두께 폭 품목코드 표준단면치수 Dimensions 적용 링크 피치 단면적

Thickness Width (A) DescriptionCode B C D F G Applied Link Pitch Section Area (mm2)

350 ~ 500 13TA060 154.0 94.0 46.0 15.0 14.0 135.0 1378.1

450 ~ 600 15TA060 165.0 89.0 57.0 8.0 20.0 154.0 1792.9

500 ~ 900 17TA080 198.9 108.0 60.3 0.0 25.0 171.5 2903.4

500 ~ 600 17TB080 190.0 107.9 60.3 0.0 20.0 171.5 2353.8

500 ~ 700 19TB085 219.0 155.6 69.0 18.0 26.0 190.0 3299.2

500 ~ 900 17TA090 198.9 108.0 60.3 0.0 25.0 171.1 3094.2

500 ~ 700 17TC095 190.0 102.4 57.0 8.0 20.0 175.0 2676.8

400 ~ 900 19TA100 217.5 160.4 62.0 18.0 26.0 190.0 3679.7

500 ~ 900 19TB100 219.0 155.6 69.0 18.0 26.0 190.0 3626.3

500 ~ 950 20TA110 232.5 178.4 72.2 20.0 26.0 203.2 4290.7

600 ~ 900 20TB110 232.5 178.4 72.2 20.0 31.0 203.2 4699.0

600 ~ 900 21TB110 247.0 178.4 76.2 19.0 36.0 216.0 5133.7

600 ~ 850 21TC110 250.0 178.4 76.2 19.0 30.0 216.0 4542.8

600 ~ 900 21TA130 247.0 184.0 76.2 19.0 36.0 215.9 5627.7

600 ~ 900 21TA160 247.0 184.2 76.2 19.0 36.0 216.0 5626.0

600 ~ 900 21TD160 247.0 200.0 76.2 25.4 36.0 228.6 6148.5

600 ~ 900 21TD180 247.0 184.0 76.2 19.0 36.0 216.0 6642.5

6.0

8.0

8.5

9.0

9.5

10.0

11.0

13.0

16.0

18.0

치수단위(Unit) : mm

3) Track Shoe 트랙슈(Double Grouser)

두께 폭 품목코드 표준단면치수 Dimensions 적용 링크 피치 단면적

Thickness Width (A) DescriptionCode B C D F G Applied Link Pitch Section Area (mm2)

15.0 600 ~ 900 P216DG 250.0 184.0 76.2 19.0 49.5 216.0 6238.4

( )안의 값은 제품분석의 경우에 적용한다.

이형철근

Deformed bar

이형철근

Deformed bar

C+Mn/6 ≤ 0.50%

C+Mn/6 ≤ 0.55%

C+Mn/6 ≤ 0.60%

강재성분표

(Chemical Com

position)

138 139


SCR415 0.13~0.18 0.15~0.35 0.60~0.90 0.03 0.03

SCR420 0.18~0.23 " " " "

SCR435 0.33~0.38 " " " "

SCR440 0.38~0.43 " " " "

SCR445 0.43~0.48 " " " "

SCM415 0.13~0.18 " " " "

SCM420 0.18~0.23 " " " "

SCM435 0.33~0.38 " " " "

SCM440 0.38~0.43 " " " "

SCM445 0.43~0.48 " " " "

S43BC 0.43~0.48 0.15~0.35 0.67~0.90 0.03 0.015

15B23M 0.21~0.25 0.15~0.30 1.00~1.10 0.03 0.015

15B37M 0.32~0.36 " 1.00~1.40 " 0.025

10B35M 0.32~0.36 " 1.00~1.30 " "

30MNB4 0.32~0.36 " 1.20~1.50 " "

SCR440B 0.39~0.43 " 0.67~0.85 " "

SBC70 0.33max 0.15~0.35 1.00~1.90 0.035 0.035

명칭

Designation종류의 기호

Symbol

화학성분

Chemical Composition(%) C Si Mn P.max. S.max.

기계구조용

합금강

Alloy Steel for Machine Structural Use

중기용

For Heavy Construction Equipment

체인용

For Chain

HH 340 0.72-0.82 0.10-0.55 0.70-1.10 0.030 0.020 Cr : 0.20max., V : 0.03 max.

HH 370 0.72-0.82 0.10-0.65 0.80-1.20 0.030 0.020 Cr : 0.25max., V : 0.03 max.

15, 20 0.40-0.60 0.40 max. 0.50-0.90 0.045 0.050 KS R 9101

22 0.45-0.65 0.40 max. 0.50-0.90 0.045 0.050

SG-1 - - - 0.050 0.050 KS E 4002

SG-2 - - - 0.050 0.050

SY 295 - - - 0.040 0.040

KS F 4604 SY 390 - - - 0.040 0.040

SHK 400 - - - 0.050 0.050

SHK 400M 0.23 max. - 2.5°C min. 0.040 0.040 KS F 4603

SHK 490M 0.20 max. 0.55 max. 150 max. 0.040 0.040

SM 10C 0.08~0.13 0.15~0.35 0.30~0.60 0.03 0.035

SM 15C 0.13-0.18 〃〃〃〃

SM 20C 0.18-0.23 〃〃〃〃

SM 25C 0.22-0.28 〃〃〃〃

SM 30C 0.27-0.33 〃 0.60-0.90 〃〃

SM 35C 0.32-0.38 〃〃〃〃

SM 38C 0.35-0.41 〃〃〃〃

SM 40C 0.37-0.43 〃〃〃〃

SM 45C 0.42-0.48 〃〃〃〃

SM 50C 0.47-0.53 〃〃〃〃

SM 55C 0.52-0.58 〃〃〃〃

SM 58C 0.55-0.61 〃〃〃〃

A 105 0.35max 0.35max 0.60-1.05 0.04 0.05

명칭


Symbol

화학성분

Chemical Composition(wt%)

C Si Mn P.max. S.max.

비고

Remarks비고

Remarks

열처리레일

Head Hardened Rails

경레일

Light Rails


I-Beams for Mine Support

H형강 말뚝

H-Bearing Piles

기계구조용 탄소강재

Carbon Steel for Machine Structural Use

강널말뚝

Sheet Piles

강재성분표

(Chemical Com

position)

강재성분표

(Chemical Com

position)

140 141


Flat bars, Shapes, 5 & No. 5 21

under in thickness

Flat bars, Shapes, over 5 to No. 1A 17

16, incl. in thickness

Flat bars, Shapes, over 16 No. 1A 21

to 50, incl. in thickness

Flat bars, Shapes, over 40 No. 4 23

in thickness

Steel bars, 25 & under in

diameter, side or width No. 2 20

between the opposite sides.

Steel bars, 25 in diameter,

side or width between No. 3 24

the opposite sides.


under in thickness





Flat bars, Shapes, over 40 No. 4 21

in thickness

Rolled Steel For General Structure 일반구조용 강재 KS D 3503

SS 400 245 235 215 400-510

SS 490 285 275 255 490-610

180° 1.5X thickness No. 1

180°

1.5X diameter,

side or width

between opposite

sides.

No. 2

180° 2.0X thickness No. 1

종류의

기호

Symbol

항복점 또는 내력

Yield point or Yield Strength (N/mm2)

16 &under

Over 16 to 40. incl. Over 40

인장시험

Tensile Test굽힘시험

Bend Test

인장강도

Tensile Strength (N/mm2)

굽힘각도

Bending Angle

시험편

Test Piece

안쪽반지름

Inside Radius of Bending

연신율 Elongation

Min. (%)

인장

시험편

Test Piece

강재의 치수

Dimension of steel(mm)두께 Thickness. (mm)

SD 300 300 min. 440 min. No. 2 or equivalent 18

180° D16 & under 1.5d

No. 3 or equivalent 20 Over D16 2.0d

No. 2 or equivalent 18 D16 & under 1.5d

SD 350 350 min. 490 min.

180°

Over D16 2.0d

No. 3 or equivalent 20 D41 incl.

D51 2.5d

SD 400 400 min. 560 min.

No. 2 or equivalent 16 180°

2.5d

No. 3 or equivalent 18

SD 500 500 min. 620 min.


D25 & under 2.5d


SD 400W 400 min. 560 min. No. 2 or equivalent 16

180°

2.5d No. 3 or equivalent 18

SD 500W 500 min. 620 min.


D25 & under 2.5d


SD 600 600 min. 710 min. No. 2 or equivalent 10 90° D25 & under 2.5d

SD 700 700 min. 800 min. No. 3 or equivalent 10 90° Over D25 3.0d

Mechanical Properties 기계적 성질

Steel Bars For Concrete Reinforcement 철근 KS D 3504

종류의

기호

Symbol

항복점 또는 0.2%

항복강도

Yield point or 0.2%Yield Strength

(N/ mm2)

인장시험

Tensile Test굽힘시험

Bend Test

인장강도

Tensile Strength (N/ mm2 )

굽힘각도

Bending Angle

안쪽반지름



시험편

Test PieceMin. (%)

d=nominal diameter of specimen.

기계적

성질

(Mechanical Properties)

기계적

성질


142 143


KS D 3515Rolled Steel For Welded Structure 용접구조용 강재

종류의

기호

Symbol

항목점 또는 항복강도


두께 Thickness. (mm)

16 &under

Over 16to 40. incl.

Over 40to 75. incl.

100 &under

인장시험 Tensile Test 충격시험 Impact Test

인장강도

Tensile Strength (N/mm2 ) 기호

Symbol

시험온도

Test Temper-

ature ℃

샤르피

흡수에너지

Charpy Absorbed

EnergyJoule

시험편

Test Piece

연신율

Elongation

Min. (%)

시험편

Test Piece

두께

Thickness. (mm)

5 & Under No. 5 23

SM 400 245 235 215 400-510

Over 5 to 16 incl. No.1A 18 SM 400A - -

A, B Over 16 to 50 incl. No.1A 22 SM 400B 0 27 min Over 40 No. 4 24

5 & Under No. 5 22

SM 490 325 315 295 490-610

Over 5 to 16 incl. No.1A 17 SM 490A - -

A, B Over 16 to 50 incl. No.1A 21 SM 490B 0 27 min Over 40 No. 4 23

5 & Under No. 5 19

SM 490Y 365 355 335 490-610

Over 5 to 16 incl. No.1A 15 SM 490YA - -

A, B Over 16 to 50 incl. No.1A 19 SM 490YB 0 27 min Over 40 No. 4 21

5 & Under No. 5 19

SM 520 365 355 335

520-640 Over 5 to 16 incl. No.1A 15 SM 520B 0 27 min

B Over 40 Over 16 to 50 incl. No.1A 19 No. 4 21

No. 4

in rolled

direction

Hot Rolled H-Beam for Building Structure 건축구조용 열간압연 H형강

종류의

기호

Symbol

항목점 또는 항복강도



16 ≤<16

16<t≤40

인장시험 Tensile Test 충격시험 Impact Test

인장강도

Tensile Strength (N/mm2 )

항목비

(% )

시험온도

Test Temper-

ature ℃

샤르피

흡수에너지

Charpy Absorbed

EnergyJoule

연신율

Elongation

Min. (%)시험편

Test Piece

두께

Thickness. (mm)

SHN 400 235~355 400~510 ≤85 6<t≤16

No. 1A 17≤

0 27J≤ 16<t≤40 21≤

SHN 490 325~445 490~610 ≤85 6<t≤16

No. 1A 17≤

0 27J≤ 16<t≤40 21≤

SHN 520 365~465 520~640 ≤85 6<t≤16

No. 1A 17≤

-5 47J≤ 16<t≤40 21≤

KS D 3866

종류의

기호

Symbol

항복점 또는 내력


16 &under

Over 16 to 40. incl. Over 40

인장시험 Tensile Test 굽힘시험 Bend Test

인장강도

Tensile Strength (N/mm2)

굽힘각도

Bending Angle

시험편

Test Piece

안쪽반지름



Min. (%)

인장

시험편

Test Piece

강재의 치수

Dimension of steel(mm)


diameter, side or width No. 2 18


Steel bars, over 25 in dia-

meter side or width bet- No. 3 21

ween the opposite sides.


under in thickness






diameter, side or width be- No. 2 13

tween the opposite sides.

Steel bars, over 25 to 40, incl.

in diameter side or width No. 3 17


KS D 3503

SS 490 285 275 255 490-610

SS 540 400이상 390이상 - 540이상

180°

180°

180°

2.0X diameter,

side or width

between opposite

sides.

2.0X thickness

2.0X diameter,

side or width

between opposite

sides.

No. 2

No.1

No.2


기계적

성질


기계적

성질


144 145


Dimensional Tolerance 치수 허용차

Wide Flange Beams H형강 KS D 3502 치수단위(Unit) : mm

Flange, 110 & under +4.0, -1.0

Over 110 to 210, incl. +4.0, -2.0

Over 210 to 325, incl. ±4.0

Over 325 +6.0, -5.0

Depth, 180 & under +3.0, -2.0

Over 180 to 40 +4.0, -2.0

Over 400 to 700, incl. +5.0, -3.0

Over 700 ±5.0

under 7 ±0.7

7 to 10, excl. ±1.0

10 to 20, excl. ±1.5

20 to 40, excl. ±2.0

under 6.5 +1.5, -0.5

6.5 to 10, excl. +2.0, -1.0

10 to 20, excl. +2.5, -1.5

20 to 30, excl. +2.5, -2.0

30 to 40, excl. ±2.5

Flange, 110 & under T+T′=1.5mm

Over 110 T+T′=2% x (B)

(최대 6.5mm)

Flange, 110 & under 2.5

Over 110 to 325, incl. 3.5

Over 325 5.0

Depth, 180 & under 길이 x 0.30% 이하

Over 180 to 360, incl. 길이 x 0.15% 이하

Over 360 길이 x 0.10% 이하

(B, H) x 1.6% 이하

(최소치 3.0mm)

+100, -0

Nominal Depth, under 400 2.0

400 to 600, excl. 2.5

600 & over 3.0

Radius. 10 & under ± 1.0

Over 10 to 20, incl. ± 2.0

Over 20 ± 3.0

구분 Classification 허용차 Tolerance 비고 Remarks

폭

Width

(B)

높이

Depth

(H)

직각도

Out-of-square(T)

편심

Web off Center(S)

굴곡

Camber and Sweep

웨브의 휨

Web flatness(W)

곡률 반지름

Radius(r)

절단면 직각도

Ends Out-of-square길이 Length

두께

Thickness

t1

t2

the others 기타 강재

30A, 37A 70(690) - 9

철도레일 50PS 75(710) - 8

Railway Rails 40N, 50N, 60 82(800) - 10 HB 235 Min.

UIC 60 90(880) - 10 HB 260~300

열처리레일 HH 340 110(1,080) - 8 표면경도 HSC:47~53

Head Hardened Rails HH 370 115(1,130) - 8 표면경도 HSC:49~56

경레일 15, 20 58(569) - 12

Light Rails 22 65(637) - 10

광산지보용 I형강 SG-1 50 - 20

I Beams for Mine Support SG-2 57 - 16

승강기레일 8K, 13K, 18K, 24K 41 24 23

Elevator Guide Rails

강널말뚝 SY 295 50(490) 30(295) 17

Sheet Piles SY 390 55(540) 40(390) 15

SHK 400 41~52(400~510)

25(245) 17 thickness 16 & under

24(235) 21 16 over

H형강 말뚝 SHK 400M 41~52(400~510)

25(245) 18 thickness 16 & under

H-Bearing Piles 24(235) 22 16 over

SHK 490M 50~62(490~610)

33(325) 17 thic kness 16 & under

32(315) 21 16 over

명칭


Symbol

인장강도

Tensile Strength Min.Kg/mm2(N/mm2)

항복점

Yield point Min. (N/mm2)

경도

Hardness연신율

Min. %

기계적

성질


치수

허용차

(dim

ensional tolerance)

Note:The following standards are also applicable. JIS G3192, ASTM A6/6M, BS4, DIN 1025, CSA G40.1, IS808, EN10034

146 147


D13 & under 4.0% of Nominal Dia. Min. Value x 2 Refer to

Height of D13 to D19, excl. 4.5% of Nominal Dia. Min. Value x 2 “Steel Bars for Concrete Reinforcement”

Knot D19 & over 5.0% of Nominal Dia. Min. Value x 2 “Dimensions and Weight”

7m & under

+40mm

0

Length Add 5mm to the above plus size tolerance for each

Over 7m additional 1m or fraction thereof.

However, the max. value shall be limited to 120mm

Reinforcing Bars 철근 KS D 3504

구분 Classification

허용차 Tolerance 비고 Remarks

min. max.

Round Bars 원형강 KS D 3501 치수단위(Unit) : mm

직경 Under 16

Not more than 70% of total tolerance

Diameter 16 to 28, excl. ± 1.5%

range of diameter 28 & over

구분 Classification 허용차 Tolerance

비고 Remarks 편경차 Diametrical Variation

마디높이

Height of Knot

길이

Length

Sheet Piles 강널말뚝 KS F 4604 치수단위(Unit) : mm

폭 (B) ± 10.0

Width -5.0

높이 (H) ± 4.0%

Height

Less than 10 ± 1.0

Not Less than 10, ± 1.2

Less than 16

Not Less than 16, ± 1.5

길이 +Unlimited

Length 0


두께 (t)

Thickness

Angles, Channels, I-Beams ㄱ형강, ㄷ형강, Ⅰ형강 KS D 3502 치수단위(Unit) : mm

Under 50 ±1.5

50 to 100, excl. ± 2.0

100 to 200, excl. ± 3.0

200 & over ± 4.0

Under 100 ± 1.5

100 to 200, excl. ± 2.0

200 to 400, excl. ± 3.0

400 & over ± 4.0

Flange A Under 6.3 ± 0.6

(B for T-Shapes) 6.3 to 10, excl. ± 0.7

or height 10 to 16, excl. ± 0.8

Under 130 16 & over ± 1.0

Flange A Under 6.3 ± 0.7

(B for T-Shapes) 6.3 to 10, excl. ± 0.8

or height 10 to 16, excl. ± 1.0

130 & over 16 to 25, excl. ± 1.2

25 & over ± 1.5

7m & under

+40

0

Add 5mm to the above plus size

Over 7m tolerance for each additional 1m

or fraction thereof.

Ⅰ-Beam Not more than 2% of Flange B

Shapes excluding Not more than 2.5% of Flange B

Ⅰ-Beam & T-Shapes

Ⅰ-Beam & T-Shapes Not more than 0.2% of length

Shapes excluding Not more than 0.3% of length

Ⅰ-Beam & T-Shapes


변

Leg(A or B)

높이

Height(H)

두께

Thickness

(t1, t )

길이

Length

직각도Out-of-square (T)

굴곡 Camber and Sweep

To be applied to warp upward and downward, right and left.

Note:The following standards are also applicable JIS G3192, ASTM A6/6M, DIN 1013

치수

허용차

(dim

ensional tolerance)

치수

허용차

(dim

ensional tolerance)

Note:The following standards are also applicable. JIS G3192, ASTM A6/6M, BS4, 4848, DIN 1019, 1020, 1025, 1026, 1028, 1029, CSA G40.1, IS808, EN10056

Note: 1)The shape, dimension, Weight and tolerance of hot Rolled Plain Steel bars shall confirm to KS D 3051 and/or JIS G3191 2)The following standards are also applicable JIS G3112, ASTM A615, DIN 488, BS4449, SAUDI ARABIAN Standard.

148 149


Tolerance on Weight 중량 허용차

KS D 3504

1) Tolerance on weight may be specified as

follows by invoking supplementary

requirements or by agreement between

supplier and purchaser.

2) Applicable to one lot of the same

dimension(1ton or more), provided that, When

the number of piecer corresponding to 1 ton

does not reach to 10 pieces, this shall be

applicable to the lot of 10 pieces of more.

3) When the mass tolerances for steel shapes

are designated by the purchaser, they shall

comply with mass. In this case, the tolerances

on mass shall be expressed in percentage of

the difference between the theoretical mass

and actual mass to the theoretical mass.

KS D 3502 형강

JIS G 3192 Steel Shapes

KS D 3504 철근

JIS G 3112 Reinforcing

Bars

Thickness Under 10mm ±5%

10mm & over ±4%

D10 to D16, excl

D16 to D29, excl

D29 & over

Single One Lot

Piece Wt. wt.

±6% ±5%

±5% ±4%

±4% ±3.5%

표준규격 구분 허용차 비고

Standards Classification Tolerance Remarks

중량허용차

(tolerance on Weight)

Quality Certification 품질인증현황

Certificate Product of KS KS표시 허가품목

Steel Bars for Concrete Reinforcement

철근콘크리트용 봉강

Deformed Bars : SD300, SD350, SD400, SD500, SD400W, SD500W,SD600

Rolled Steel for General Structure

일반구조용 압연강재

Equal Angles & Unequal Angles : SS400, SS490, SS540

등변 ㄱ형강, 부등변 ㄱ형강

Inverted Angles : SS330, SS400

부등변 부등후 ㄱ형강

Channels, I-Beams : SS400

ㄷ형강, I형강

H-Beams : SS400, SS490, SS540

H형강

Steel strip : SS400

강대

Steel Plate : SS400, SS490, SS540

강판

Light Rails : 15kg

경레일

Light Rails : 22kg

경레일

I Section Steel for Mine Support : SG1


Rolled Steel for Welded Structure

용접구조용 압연강재

H-Beams, Channel, Equal Angle : SM400A, SM400B, SM490A, SM490B,

H형강, ㄷ형강, 등변 ㄱ형강 SM490YA, SM490YB, SM520B

Steel Strip : SM400B, SM490A, SM490B, SM490YB, SM520B, SM520C

강대

Steel Plate : SM400A, SM400B, SM400C

SM490A, SM490B,SM490C, SM490YA, SM490YB

강판 SM520B, SM520C

Cold Rolled Stainless Steel Sheet & Coil : STS 304, 304L, 316, 316L,

430, 410L, 436L

냉간 압연 스테인리스 강판 및 강대

KS D 3504 871 1973. 12. 24

95-06-001 1995, 08, 16

42 1964. 12. 08

KS D 3503 1459 1977. 05. 16

05-0388 2005. 03. 29

KS R 9101 710 1978. 06. 21

KS E 4002 2451 1982. 05. 25

5321 1987. 06. 11

KS D 3515 10987 1994. 05. 11

06-0372 2006, 09, 27

KS D 3698 7920 1990. 08. 01

Incheon인천공장

Pohang포항공장

Dangjin당진공장

Incheon인천공장

Incheon 인천공장

Pohang 포항공장

Dangjin 당진공장

Incheon인천공장

KS 기호

기호 허가일자 등급 및 품명 비고

Certi. No. Approval Date Grade & Name of Product Remarks

품질인증현황

(Quality Certification)

중량

허용차

(tolerance on Weight)

150 151


ISO Certification ISO 인증

형강 Steel Shapes 철근 Steel Bars 열연강판,강대 Hot Rolled Plates & Coils 스테인리스 Stainless Steel Plates & Coils 원형강 Round Bars 레일 및 경레일 Rails & Light Rails 빌렛, 부룸, 빔블랑크 Steel Billets, Blooms & Beam-Blanks 선철 Pig Iron 주단강 Cast Steels & Steel Ingots for Forging 주조롤 Cast Rolls 중기 Heavy Machinert 형강 Steel Shapes 철근 Steel Bars 빌렛, 부룸, 선철 및 슬라브 Steel Billets & Blooms, Pig Iron & Slab 롤 Cast Rolls 주강 MN Crossing, HI-MN Liners & Steel Castings 중기 및 기계 Heavy Machinery & Machinery 열연강판 Hot Rolled Steel 형강 Steel Shapes 철근 Steel Bars 빌렛 및 부룸 Steel Billets & Blooms 주강 Cast Rolls 중기 및 기계 Heavy Machinery & Machinery

ISO 9001 KS A ISO9001

ISO 14001 KS A 14001

QMS-1261

QMS-1330

EMS-0237

2010.02.04(최초인증

1994.04.29)

2003. 02. 26(최초인증

1995. 03. 29)

2004. 11. 02


Pohang 포항공장


구분 허가번호 허가일자 품명 비고

Section Certi. No. Approval Date Product Remarks

Certificate Product of JIS JIS표시 허가품목

Steel Bars for Concrete Reinforcement

철근콘크리트용 봉강

Plain Bars : SR235, SR295

원형철근

Deformed Bars : SD295A, SD295B, SD345, SD390

이형철근

Rolled Steel for General Structure:Shapes, Hot Rolled Steel

일반구조용 압연강재 : 형강, 열연강판

Rolled Steel for Welded Structure:Shapes, Hot Rolled Steel

용접구조용 압연강재 : 형강, 열연강판

Hot Rolled Steel Sheet Piles

열간 압연 강시판

Carbon Steels for Machine Structural Use

원형강(기계구조용 탄소강)

Rolled Steels for Building Structure

건축구조용 압연강재

Hot Rolled Mild Steels Plates, Sheet & Strip : Hot Rolled Steel

열간 압연 연강판 및 강대, 열연강판

Cold Rolled Stainless Steel Plate, Sheet & Strip

냉간 압연 스테인리스 강판 및 강대

JIS G 3112

JIS G 3101

JIS G 3106

JIS A 5528

JIS G 4951

JIS G 3136

JIS G 3131

JIS G 4305

KR8746

KR8749

KSKR07018

KR8745

KR8969

KSKR07006

KR8745

KSKR07019

KR8977

KR9995

KR9434

KSKR0305

KSKR07007

KSKR09009

1987. 08. 07

1987. 12. 03

2007. 12. 12

1987. 08. 07

1989. 06. 13

2007. 05. 30

1987. 08. 07

2007. 12. 12

1989. 10. 23

1999. 06. 02

1994. 10. 04

2003. 07. 23

2007. 05. 30

2009. 07. 23


Pohang 포항공장



Pohang 포항공장

Pohang 포항공장



구분 허가번호 허가일자 품명 비고

Section Certi. No. Approval Date Product Remarks

Hot rolled H-beam for building structure 건축구조용 열간압연 H형강

Hot Rolled Steel Sheet Piles:SY295, SY390 열간 압연 강널말뚝

Rails 보통레일

Head hardened rails 열처리레일

H-Piles H형강 말뚝

Hot Rolled Mild Steel Sheet, Coils : SPHC 열간 압연 연강판 및 강대

Hot Rolled Carbon Steel Strip for Pipes & Tubes : HRS1, HRS2 강관용 열간 압연 탄소강대

KS D 3866 09-0330 2009. 08

KS F 4604 3318 1983. 12. 07

KS R 9106 97-09-067 1997. 12. 18

99-0944 1999. 10. 28

KS R 9110 10-0106 2010. 02

KS F 4603 00-1257 2000. 03. 23

KS D 3501

05-0387 2005. 08. 17

KS D 3555 05-0389 2005. 08. 17

KS기호

허가번호 허가일자 등급 및 품명 비고

Certi. No. Approval Date Grade & Name of Product Remarks


Pohang 포항공장


Pohang 포항공장

Incheon인천공장

Dangjin당진공장

Dangjin당진공장

Pohang포항공장

Pohang포항공장


품질인증현황


품질인증현황


152 153


구분

Section허가번호

Certi. No.허가일자

Approval Date등급

Grade품명

Product

한국

선급협회

(KR)

POH00337-SP002 1997.04.10 A, AH32, AH36, DH32, DH36,FH32, FH36, RL33, RL37

선박구조용 형강(Hull Structural Sections)

POH00337-SP003 1988.09.16 RSBC70 체인구조용 봉강(Rolled Round Bars for Chain cables)

영국선급협회

(LR)MD00/0819/0012/1 2008.01.16

A, B, D, E, AH32, AH36, DH32,DH36, EH32, EH36, FH40


R3S, R4, U3, R3, U2, U1 체인구조용 봉강(Rolled Round Bars for Chain cables)

노르웨이선급협회

(DNV)AMM-4406

2007.09.07 NV A, NV E, NV A32,NV A36, NV F40

체인구조용 봉강(Rolled Round Bars for Chain cables)1999.08.04 NV K2, NV K3

2001.09.27 NV R3S, NV R3

2001.03.09 NV R4

미국

선급협회

(ABS)

ML-3-11 155204 2006.04.19A, AH32 ,AH36, E 선박구조용 형강(Hull Structural Sections)

RQ3, RQ3S, RQ4 체인구조용 봉강(Rolled Round Bars for Chain cables)

ML-3-11 285891 2007.11.20 FH40 선박구조용 형강(Hull Structural Sections)

독일

선급협회

(GL)WZ 653 HH8 2007.10.30

GL-A, GL-B, GL-D, GL-E, GL-A32,GL-D32, GL-E32, GL-F32, GL-A36,GL-D36, GL-E36, GL-F36, GL-F40


GL-K3 체인구조용 봉강(Rolled Round Bars for Chain cables)

일본선급협회

(NK)NKR-398ROL

2008.01.25 KA, KE, KA32, KD32, KA36, KD36, KF32, KF36, KF40, KL33, KL37


2006.04.10 KSBC50, KSBC70 체인구조용 봉강(Rolled Round Bars for Chain cables)

프랑스

선급협회

(BV)

10279/C0 BV 2006.11.13 A, B, D, E 선박구조용 형강(Hull Structural Sections)

10280/C0 BV 2007.10.12 AH32, AH36, DH32, DH36,EH36, FH36, FH40


07924/C0 BV 2006.11.13 Q2a, Q3a 체인구조용 봉강(Rolled Round Bars for Chain cables)

이태리선급

협회(RINA)FAB054309PU 2009.08.31 A, AH32, AH36, DH32, DH36 선박구조용 형강(Hull Structural Sections)

Certified Product of Register Shipping(steel shapes) 선급협회 제조승인 품목(형강)The others 기타 인증

Steel Shapes(H-Beam & Sheet-Pile)

형강

Stainless Steels

스테인리스

Steel Shapes(H-Beam)

BS 4360 55C

Stainless Steels

스테인리스

Hot Rolled Steel

열연강판

Reinforcing Bars

철근

레일 (60Kg K 보통레일, 60kg UIC 레일)

Hot Rolled Steel

열연강판

Hot Rolled Steel

열연강판

Reingorcing Bar

철근

Reingorcing Bar

철근

TUV

(CE-Mark,U-SIGN)

홍콩정부승인

Hong Kong

government

유럽연합(EU)

PED

유럽연합(EU)

CPD

KEPIC

(원자력분야)

철도용품 품질인증

BC 1

(싱가포르)

SNI

(인도네시아)

UK CARERS

(영국)

DCL

(두바이)

0035-CPD-060001

926/981049

696/06587

HD(SE3)453

GR/SEG/6/17

ASD/9/92250

/PIL/55C

BD GR/SEG

/6/17(Ⅱ)

01 202ROK

/Q-02 0014

0038/CPD/MUM

/0710056/1

DN-217

KRC-12호

MUM/BC1

/0710056/2

310/W/VI/2009

458 313

CL08020083

TUV Rheinland

Housing Authority

Buildings Department

Architectural Services

Department

Buildings Department

TUV Rheinland

Lloyd's Register

Verification

대한전기협회

한국철도공사

Lloyd's Register

Verification

Lembaga Sertifikasi Produk

Pusat Standardisasi

UKAS

DCLD

1998. 05. 18

2001. 06. 26

2001. 06. 06

2001. 05. 24

2003. 04. 09

2002. 07. 23

2007. 07. 19

2003. 06. 30

2010. 03. 11

2009. 08. 03

2009. 06. 02

2007. 07. 31

2008. 12. 24

구분 허가번호 허가일자 품명 인증기관 비고

Section Certi. No. Approval Date Product Accredited Unit Remarks

Incheon

인천공장

Pohang

포항공장

Incheon

인천공장

Incheon

인천공장

Dangjin

당진공장

Pohang

포항공장

Pohang

포항공장

Dangjin

당진공장

Dangjin

당진공장

Pohang

포항공장

Pohang

포항공장

..

..

..

품질인증현황


품질인증현황


154 155


Certified Product of Register Shipping(Castings and Ingots) 선급협회 제조승인 품목(주단강)

02EW719ROL

06EW1759OL KA, KE, KA32, KA36

01EW425ROL 2001. 11. 07

KD32, KD36, KF32, KF38, KL33, KL37 선박구조용 형강(Hull Structural Sections)

09EWB605ROL 1997. 04.16

KSB50, KSB70 체인용 봉강 (Rolled Round Bars for Chain cables)

05EW1765ROL

NKM-278CF 2000. 07. 27

Casting,

Carbon lngot for Forging

93EQ265SC 1993. 10. 28 & Low Alloy Steel High Holding Power Anchor(Max.25ton)

88HW111SC 1988. 02. 26 Stockless Anchor(Max.20ton)

08449/A3 BV 2001. 08. 07

08450/A3 BV 2001. 09. 07

10279/A1 BV 1997. 04. 03 A, AH, DH, EH, FH 선박구조용 형강 (Hull Structural Sections)

10280/A1 BV 1997. 04. 03 Q2a, Q3a 체인용 봉강 (Rolled Round Bars for Chain cables)

07924/A2 BV 1998. 11. 16

00371/C1 BV 2002. 01. 25 C-Mn High Holding Power Anchor(Max.36ton)

02212/D0 BV 2002. 06. 14 & Low Alloy Steel JIS Stockless Anchor(Max.46ton)

FS 05W0020 2001. 12. 21 CCS-A, CCS-A32, CCS-A35 선박구조용 형강 (Hull Structural Sections)

Steel Casting BJW01010013Z1 2002. 04. 23 Carbon Steel

(Max.130ton)

PU/17392/1 2001. 09. 25 선박구조용 형강 (Hull Structural Sections)

PU/279/01/01 2001. 04. 18

A, AH32, AH36, DH32, DH36 체인용 봉강 (Rolled Round Bars for Chain cables)

FAB054309PU

99/PU/291/TO-1 1999. 12. 17

Steel Casting,

Carbon,

Ingot for Forging

00-PU-TO/5433-1 2001. 10. 15 C-Mn

JIS Stockless Anchor(Max.46ton)

00-PU-TO/5433-2 2001. 10. 15 & Low Alloy Steel

High Holding Power Anchor(Max.46ton)

일본

선급협회

(NK)

프랑스

선급협회

(BV)

중국

선급협회

(CCS)

이태리

선급협회

(RINA)

구분 허가번호 허가일자 등급 품명

Certi. No. Approval Date Grade Product

Certified Product of Register Shipping(Castings and Ingots) 선급협회 제조승인 품목(주단강)

INC00396-SC001 2002. 04. 24

RSC Carbon Steel Castings Low

RSC-A Alloy Steel Castings

INC00396-SP001 2002. 05. 20

INC00396-SC001 2001. 09. 03 A, AH, DH, EH, FH

선박구조용 형강 (Hull Structural Sections)

POH00337-SP002 1997. 04. 10 FL33, RL37

체인용 봉강 (Rolled Round Bars for Chain cables)

POH00337-SP003 1988. 09.16 SBC70

MD00/0754-003/2 2002. 01. 16 Carbon,

Castings(Max.130ton)

ANCH4129R1 1994. 01. 04 C-Mn

Stockless Ordinary Anchor(Max.46ton)

ANCH4130R1 1994. 01. 04 & Low Alloy Steel

High Holding Power Anchor(Max.40ton)

ANCH4131R1 1994. 01. 04 Spek Ordinary Anchor(Max.20ton)

MD00/0754/001/1 2002. 01. 16

A, AH, DH, FH 선박구조용 형강 (Hull Structural Sections)

MD00/07819/0005/1 2002. 05. 11

LT-DH, LT-EH, LT-FH 체인용 봉강 (Rolled Round Bars for Chain cables)

MD00/0819/0012/1 R3S, R4, U3, R3, U2,U1

AMM-1004

AMM-1003 2001. 11. 05

NV A, NV E, NV A32, NV A35


AMM-2332 1998. 01. 14

NV4-4


AMM-4406 2001. 03. 09

NV K2, NV K3, NVR3, NV RS, NVR4

AMM-976 2001. 11. 05

Carbon,

Carbon Steel Castings(Max.170ton)

C-Mn

Ingots for Forging(Max.80ton)

S-3619 2002. 08. 05 & Low Alloy Steel

Stockless Spek Anchor(Max.20ton)

S-3055 2000. 12. 18 High Holding Po wer Anchor(Max.40ton)

ML3-5/11 255893a 1997. 05. 02

ML3-5/11 255893b 2001. 03.09 A, AH, DH, EH, FH


ML3-11 496697 2005. 06. 16 RL33, RL37


ML3-11 444829 2004. 07. 05 Q2a, Q3a

WZ851 HH1 2001. 11. 07

Steel Castings,

SC410 lngots for Forging

12608-93/Sie-Hi 1993. 04. 19 SF490A High Holding Power Anchor(Max.40ton)

65370-93/Sie-Hi 1993. 09. 22 Stockless Spek Anchor(Max.20ton)

GL-A, GL-E WZ 118 HH2 2001. 11. 07

GL-A32, GL-A36, GL-E32, GK-E35 선박구조용 형강 (Hull Structural Sections)

WZ 653 HH8 1997. 06. 05 GL-F32, GL-F35, GL-F40GL-K3


한국

선급협회

(KR)

영국

선급협회

(LR)

노르웨이

선급협회

(DNV)

미국

선급협회

(ABS)

독일

선급협회

(GL)

구분 허가번호 허가일자 등급 품명

Certi. No. Approval Date Grade Product

품질인증현황


품질인증현황


156 157


구분

HR PLATE PLATE

허가일자 등급 허가일자 등급

한국

선급협회

(KR)2007.12.27 A, B,

AH32, AH36 2010.03.09 A, B, D, AH32, AH36, DH32, DH36

영국

선급협회

(LR)2008.04.04 A, B,


노르웨이

선급협회

(DNV)2008.02.05 NV A, NV B,

NV A32, NV A36 2010.03.16 NV A, NV A32, NV A36

미국

선급협회

(ABS)2008.03.11 A, B,


독일

선급협회

(GL)2008.01.17 GL-A, GL-B,

GL-A32, GL-A36 2010.04.06 GL-A, GL-B, GL-D, GL-A32, GL-A36, GL-D32, GL-D36

일본

선급협회

(NK)2008.01.18 KA, KB,

KA32, KB32 2010.03.25 KA, KB, KD, KA32, KA36, KD32, KD36

프랑스

선급협회

(BV)2008.03.24 A, B,


이태리

선급협회

(RINA)2008.04.17 A, B,


중국

선급협회

(CCS)- - 2010.03.10 A, B, D,

A32, A36, D32, D36

러시아

선급협회

(RS)- - 2010.03.22 A, B, D,

A32, A36, D32, D36

Conversion Table 도량형 환산표

Linear Measure 길이

Millimeter (mm) 1 0.1 0.001 0.03937 0.0032808 0.0010936 0.066214

Centimeter (cm) 10 1 0.01 0.3937 0.032808 0.010936 0.056214

Meter (m) 1,000 10 1 39.37 3.28083 1.0936 0.036214

Inch (in) 25.40 2.540 0.0254 1 0.0833 0.02778 0.041578

Foot (ft) 304.8 30.48 0.3048 12 1 0.333 0.031894

Yard (yd) 914.4 91.44 0.9144 36 3 1 0.035682 Mile (mi) 1,609,347.0 160,934.70 1,609.35 63,360 5,280 1,760 1

Millimeter (mm)

Centimeter (cm)

Meter (m)

Inch (in)

Foot (ft)

Yard (yd)

Mile (mi)

Square Measure 면적

Square Millimeter(mm2) 1 0.01 0.051 0.00155 0.0410764 0.05119599

Square Centimeter(cm2) 100 1 0.0001 0.154999 0.0010764 0.03119599

Square Meter(m2) 1,000,000 10,000 1 1,549.99 10.7639 1.19599

Square Inch(in2) 654.2 6.452 0.036452 1 0.006944 0.037616

Square Foot(ft2) 92,900 929 0.0929 144 1 0.11111

Square Yard(yd2) 836,100 8,361 0.8361 1,296 9 1

Square Millimeter (mm2)

Square Centimeter (cm2)

Square Meter (m2)

Square Inch (in2)

SquareFoot (ft2)

Square Yard (yd2)

Cube Measure 부피

Cubic Centimeter(cm3)

Cubic Meter (m3)

Cubic Inch (in3)

Cubic Foot(ft3)

Cubic Yard(yd3)

Cubic Centimeter(cm3) 1 0.051 0.06102 0.043531 0.051308

Cubic Meter(m3) 1,000,000 1 61,023 35.31 1.308

Cubic Inch(in3) 16.39 0.041639 1 0.035787 0.042143

Cubic Foot(ft3) 28,317 0.028317 1,728 1 0.03704

Cubic Yard(yd3) 764,500 0.7645 46,660 27 1

Weight 중량

Kilogram(kg)

Ounce(oz)

Pound(lb)

Net Ton(2,000lbs) (nt)

Gross Ton(2,240 lbs) (gt)

Metric Ton(1,000kg) (t)

Kilogram(kg) 1 35.274 2.20462 0.001102 0.039842 0.001

Ounce(oz) 0.02835 1 0.0625 0.043125 0.04279 0.042835

Pound(lb) 0.45359 16 1 0.0005 0.034464 0.034536 Net Ton(nt) 907.187 32,000 2,000 1 0.89286 0.90719

Gross Ton(gt) 1,106.05 35,840 2,240 1.12 1 1.01605

Metric Ton(t) 1,000 35,274 2,204.62 1.10231 0.98421 1

Certificated Product of Register Shipping (HR PLATE, PLATE) 선급협회 제조승인 품목 (HR PLATE, PLATE)

Note : The small subnumeral following a zero indicates that the zero is to be repeated that number of times. thus 0.034=0.0004

품질인증현황


도량형

환산표

(Conversion table)

158 159


Pressure 압력

Bar

Long Tonper Sq. Foot

(long ton w/ft2)

BarometricPressure

(atm)

MercuryColumnin Meter(m Hg)

MercuryColumnin Inch(in Hg)

WaterColumnin meter(m H2O)

WaterColumnin Foot(ft H2O)

Bar 1 0.93239 0.98692 0.75006 29.53 10.197 33.456

Long ton per Sq.Foot 1.0725 1 1.0585 0.80445 31.671 10.937 35.881 (long ton w/ft2) Barometric Pressure

1.0133 0.94074 1 0.76 29.921 10.333 33.9 (atm)

Mercury Column in Meter 1.3332 1.2431 1.3158 1 39.37 13.595 44.605

(m Hg)

Mercury Column in inch 0.03386 0.031574 0.033421 0.0254 1 0.34533 1.133

(in Hg)

Water Column in Meter 0.098064 0.091436 0.096781 0.073554 2.8958 1 3.2808

(m H2O) Water Column in Foot

0.02987 0.02787 0.029499 0.022419 0.088265 0.3048 1 (ft H2O)

Equivalent Degrees, Centigrade and Fahrenheit 등가온도, 섭씨와 화씨온도

C F C F C F C F C F C F C F C F

-129 -200 -17.8 0 -8.33 17 1.11 34 10.6 51 20.0 68 29.4 85 43 110

-101 -150 -17.2 1 -7.78 18 1.67 35 11.1 52 20.6 69 30.0 86 49 120

-73.3 -100 -16.7 2 -7.22 19 2.22 36 11.7 53 21.1 70 30.6 87 54 130

-67.8 -90 -16.1 3 -6.67 20 2.78 37 12.2 54 21.7 71 31.1 88 60 140

-62.2 -80 -15.6 4 -6.11 21 3.33 38 12.8 55 22.2 72 31.7 89 66 150

-56.7 -70 -15.0 5 -5.56 22 3.39 39 13.3 56 22.8 73 32.2 90 71 160

-51.2 -60 -14.4 6 -5.00 23 4.44 40 13.9 57 23.3 74 32.8 91 77 170

-45.6 -50 -13.9 7 -4.44 24 5.00 41 14.4 58 23.9 75 33.3 92 82 180

-40.0 -40 -13.3 8 -3.89 25 5.56 42 15.0 59 24.4 76 33.9 93 88 190

-34.5 -30 -12.8 9 -3.83 26 6.11 43 15.6 60 25.0 77 34.4 94 93 200

-28.9 -20 -12.2 10 -2.78 27 6.67 44 16.1 61 25.6 78 35.0 95 99 210

-26.1 -15 -11.7 11 -2.22 28 7.22 45 16.7 62 26.1 79 35.6 96 100 212

-23.4 -10 -11.1 12 -1.67 29 7.78 46 17.2 63 26.7 80 36.1 97

-20.6 -5 -10.6 13 -1.11 30 8.33 47 17.8 64 27.2 81 36.7 98

-10.0 14 -0.56 31 8.89 48 18.3 65 27.8 82 37.2 99

-9.44 15 0 32 9.44 49 18.9 66 28.3 83 37.8 100

-8.39 16 0.56 33 10.0 50 19.4 67 28.9 84 38 101

Weight per Linear Unit 중량

Gram perCentimeter(g/cm)

Kilogram perMeter (kg/m)

Pound perInch (lb/in)

Pound perFoot (lb/ft)

Pound perYard (lb/yb)

Gram per Centimeter(g/cm) 1 0.10 0.50560 0.06720 0.20159

Kilogram per Meter(kg/m) 10 1 0.05600 0.67197 2.0159

Pound per Inch(lb/in) 178.5 17.8579 1 12 36

Pound per Foot(lb/ft) 148,816 1.48816 0.08333 1 3

Pound per Yard(lb/yb) 4.96054 0.49605 0.02778 0.3333 1

Weight per Unit Area 단위면적당 중량

Kilogram per SquareCentimeter (kg/cm2)

Kilogram per SquareMeter (kg/m2)

Metric Ton perSquare Meter (t/m2)

Kilogram per Square Centimeter(kg/cm2) 1 10,000 10

Kilogram per Square Meter(kg/m2) 0.0001 1 0.001

Metric Ton per Square Meter(t/m2) 0.01 1,000 1

Pound per Square Inch(lb/in2) 0.0703067 703.06686 0.7031

Pound per Square Foot(lb/ft2) 0.0004882 4.8824087 0.004882

Weight per Unit Volume 단위체적당 중량

Kilogram per CubicCentimeter (kg/cm3)

Kilogram per CubicMeter (kg/m3)

Metric Ton perCubic Meter (t/m3)

Kilogram per Cubic Centimeter(kg/cm3) 1 1,000,000 1,000

Kilogram per Cubic Meter(kg/m3) 0.000001 1 0.001

Metric Ton per Cubic Meter(t/m3) 0.001 1,000 1

Pound per Cubic Inch(lb/in3) 0.02768 27,680.4 27.6804

Pound per Cubic Foot(lb/ft3) 0.000016 16.0196 0.01602

Energy 에너지

B.T.U Calories Ft-lb kg-m Hp-hr Kw-hr Joules

B.T.U(mean) 1 0.252 778 107.563 0.032939 0.032931 1,054.8

Calories(mean) 3.968 1 3,091.36 426.84 0.001559 0.001163 4,185

Ft-lb 0.001285 0.033239 1 0.1383 0.06505 0.063767 1.355

Ft-ton 2.571 0.6478 2,000 276.511 0.00101 0.037535 2,712.59

kg-m 0.009297 0.002343 7.23301 1 0.053653 0.052725 9.806

Hp-hr 2,544.99 641.327 1,980.000 273,747 1 0.746 2,685,600

Kw-hr 3,411.57 859.702 2,654.200 366,959 1.34041 1 3,600,000

Joules(absolute) 0.039477 0.032389 0.73735 0.101937 0.063725 0.062778 1

Lb C 14,544 3,665 11,315.000 1,564,396 5.714 4.263 153,470,000

Lb H2O 970.4 244.537 745.971 104,379 0.38127 0.284424 1,023,966

Note:The small subnumeral following a zero indicates that the zero is to be repeated that number of times. thus 0.034=0.0004 Note: 변환공식Conversion formula : F=1.8C+32

도량형

환산표

(Conversion table)

도량형

환산표

(Conversion table)

160 161


Caution 주의사항

Steel Shapes & Deformed Bars┃Suggested use┃

• Follow all directions that are specified Problems may occur if products are not used according to their intended specifications.• Work according to standard specifications. Careless and improper usage may cause cracking and damage. • Hyundai Steel’s sheet Pile interlock is made up of different sizes and shapes. Other brands should not be used as a replacement as they differ. Please contact us immediately if you are

considering using another manufacturer’s interlock steel board pile.• Steel reinforcing bars should follow KS guidelines when being shaped. Be careful of the potential hazards that can be caused by excessive operations or shaping.

┃Instructions on handling┃

• Be sure to wear safety gear when handling products Beware of being shocked or cut.• Bind products tightly during transportation and be sure to follow traffic laws and regulations. injury or loss can occur from falling products.• ensure that support is used when piling up products injuries may result from jamming your hands or feet in the products• use designated equipment when loading and unloading products using improper equipment can cause unexpected accidents• do not lift products that are on the binding line without using a lever or a wire dropping of products that are on the untied binding line may result in casualties• When performing crane work, make sure to on both ends. using a single rope to balance can cause severe damage as products may drop. • Check all work conditions before handling any steel products Be careful of hazards caused by lightning or high voltage shock• When transporting steal products, ensure that more than two people are on the job if one person is on the job, steel products may sway and lose their balance causing injuries.

Casting & Ingot ┃Instructions on handling┃

• use the correct crane for each product as all have different weights using improper equipment can cause unexpected accidents.• use lug and Shackle for each product using improper shackles may cause unexpected accidents.• use safety equipment during all operations. use safety equipment during Casting and ingot operations as

unexpected accidents may occur including falling due to slippage.• using proper safety equipment when binding the products together. When loading and unloading products, be careful of the binding chain coming into contact with

the product as this may cause damage and paint to peel off. • Check to make sure that products are piled safely. When piling or transporting products using a crane, be careful as injuries may result from the jamming of body parts. • Welding work should be done according to all standard specifications not following regulations may cause problems such as the damaging or cracking of products.• Select the correct vehicle according to the weight of the products when transporting goods. not using the correct vehicle when transporting goods may cause product damage or human injuries and fatalities.• Bind products tightly during transportation and be sure to follow traffic laws and regulations. injury or loss can occur from falling products.

형강 및 철근

┃사용시 주의사항┃

• 설계도에 의거한 강재의 종류를 사용하시기 바랍니다.

설계도에 맞지 않는 제품 사용시 구조물 안전에 문제가 발생합니다.

• 형강은 표준시방에 따라 가공, 용접 등의 작업을 하시기 바랍니다.

적합치 못한 작업으로 제품손상, 용접부, 균열 등의 문제가 발생할 수 있습니다

• 강널말뚝 계수부(interlock)형상 및 치수는 제조사별로 차이가 있으므로

타사 제품과 혼용하여 사용하지 마십시오.

타사 제품과 혼용 사용시 당사 관련팀에 문의하시기 바랍니다.

• 철근은 한국공업규격(KS)에 정해진 방법대로 굽힘가공 작업을 하십시오.

무리하게 작업하거나 저온에서 굽힘가공시 철근이 부러질 수 있으며, 그로 인해 다칠 수 있습니다.

┃취급시 주의사항┃

• 제품 취급시 안전 장구를 착용하십시오.

충격 및 베임 등 인체에 상해를 입을 수 있습니다.

• 제품 운송시 제품을 움직이지 않게 결박하고 운송법규를 준수하십시오.

제품낙하로 인하여 인적, 물적 피해가 발생할 수 있습니다.

• 제품 적치시 제품 사이에 고임목을 놓고 적치하시기 바랍니다.

제품사이에 손, 발이 끼어 다칠 수 있습니다.

• 제품 상, 하차시는 규정된 장비를 사용하십시오.

부적합한 장비 사용으로 인해 안전사고가 발생할 수 있습니다.

• 제품 결속선에 지게발 또는 와이어를 넣어 들어 올리지 마십시오.

결속선이 풀어져 제품 추락으로 인해 인명피해를 초래할 수 있습니다.

• 크레인 작업시 양줄로 균형을 맞추어 작업 바랍니다.

제품을 외줄로 걸어 작업시 균형이 맞지 않아 낙하로 인해 피해를 초래할 수 있습니다.

• 강재취급시 작업전 작업조건을 확인 하시기 바랍니다.

낙뢰 및 고압선 접촉에 의한 위험이 발생할 수 있습니다.

• 철근의 소운반은 2인 이상이 하십시오.

1인이 운반하면 철근의 출렁거림으로 균형을 잃어 다칠 수 있습니다.

주강 및 단강┃취급시 주의사항┃

• 각 제품별 중량에 맞는 기중기를 사용하십시오.

부적합한 장비 사용시 낙하로 인해 안전사고가 발생할 수 있습니다.

• 각 제품별 러그(LUG)용 샤클(SHACKLE) 걸고리를 사용하십시오.

부적합한 걸고리 사용시 이탈로 인해 안전사고가 발생할 수 있습니다.

• 안전장구를 착용하고 작업하십시오.

안전장구를 미착용하고 제품에 올라가는 경우 표면이 미끄러워 추락 등의 안전사고가 발생할 수 있습니다.

• 제품 결박시 접촉부 보호대를 사용하시기 바랍니다.

상차 및 선적시 결박체인이 직접 제품에 접촉되면 제품손상 및 도색 벗겨짐이 발생될 수 있습니다.

• 안전을 확인 후 주의하여 적치하십시오.

기중기로 제품을 운반 및 적치할 경우 초기 및 최종 작동시 손, 발이 끼어 다칠 수 있습니다.

• 용접은 시방서에 따라 용접하십시오.

규정에 벗어난 용접작업은 제품에 손상을 초래할 수 있습니다.

• 각 제품별 중량에 적합한 차량을 선정하여 운송하십시오.

제품중량에 맞지 않는 차량으로 운송시 낙하 및 이탈로 인적, 물적 피해가 발생할 수 있습니다.

• 제품 운송시 제품을 움직이지 않게 결박하고 운송법규를 준수하십시오.

제품 낙하로 인하여 인적, 물적 피해가 발생할 수 있습니다.

162 163



Hot Rolled Steel & Stainless Steel Sheets┃Instructions on handling┃

• use products according to their intended use. damage or injuries may occur if products are not used according to their intended specifications.• Other company products should not be used as a replacement of Hyundai products such as the Hl as they differ. Processing and gloss may have differences.• excessive deep drawing may cause cracking• When using the press line, check the metallic mould before beginning operations. during the pressing process, products may explode.• Warm up the pressing machines before usage during the cold seasons. if the machines are not warmed up, products may explosions.• Products near coastal regions or regions where there is heavy salt may corrode dramatically. use steel products that have good corrosion resistance such as the Stainless 316 when using products

near coastal regions where salt content is high.

┃Instructions on handling┃

• use alkali such as soap liquid when cleaning products. Products may corrode when using dye products• Only pile 2B Coil products 2 levels high. if 2B Coil products are pile 3 levels high, the lower level coils will be crushed.• When piling coil products, make sure that the weight of the coils at the top is less than the weight of the base coils. When this is not done, the coils piled on the lower end may be damaged.• Hl Coils must only be piled one level high. if Hl Coils are piled higher than one level high, the bottom level coils will be crushed. • Sheet product may be piled 10 levels high. (two ton products may only be piled 5 levels high) Sheet product piled higher than 10 levels high (two ton products that are piled higher than 5 levels high)

may cause damage to the support packages along with the sheet metal themselves.• ensure that the same sized support packages are used to separate the sheet metals when piled. damage may occur as a result of using different sized support packages.• ensure that no more than 3 boxes are loaded and unloaded at a time. injuries or damage may result from too many boxes being loaded and unloaded• use protective equipment to bind products tightly during transportation. injury or loss can occur from falling products during transportation.• in the event not using dunnage when piling up the coil product may collapse injury can occur from the product breaking down or collapsing• ensure that products do not come into contact with sea water. that has a high concentration of salt. in the event that a product comes into contact with salt water, products may corrode • use safety equipment when handling any products. Beware of being shocked or cut.• do not dismantle the steel bend from the front of the coil product. in the event that the steel bend is dismantled, the coil may pop out causing serious injury.

열연강판 및 스테인리스 냉연강판

┃사용시 주의사항┃

• 제품을 지정된 용도로 사용하십시오.

오사용으로 인해 인적, 물적 피해를 초래할 수 있습니다.

• HL같은 표면가공품의 외장재를 타사 제품과 혼용하여 사용하지 마십시오.

가공상태나 광택에 차이가 있을 수 있습니다.

• 가혹한 심가공(DEEP DRAWING)은 크랙을 발생시킬 수 있습니다.

• 프레스 작업시 금형의 상태를 확인 후 작업하십시오.

재료의 터짐 현상이 발생할 수 있습니다.

• 동절기 프레스시 금형을 상온으로 예열하십시오.

초기작업시 터짐이 발생할 수 있습니다.

• 해안지역 및 염기가 많은 지역에서는 제품의 부식이 급격하게 발생됩니다.

내식성이 강한 강종(스테인리스 316과 같은 강종)을 사용하십시오.

┃취급시 주의사항┃

• 제품 세척시 비눗물 같은 알칼리성 세척액을 사용하십시오.

신나와 같은 염기성 물질을 사용하면 변색되거나 녹이 발생할 수 있습니다.

• 2B코일 제품은 2단까지만 적치하십시오.

3단이상 적치하면 아래단 코일이 찌그러 집니다.

• 2단 적치시 상단 코일 중량이 하단 코일 중량을 넘지 않도록 하십시오.

중량으로 인해 하단 코일이 손상될 수 있습니다.

• HL코일 제품은 1단 적치만 하십시오.

2단 이상 적치하면 아래 제품이 찌그러져 사용할 수 없습니다.

• 판재 제품은 10단(2톤 제품은 5단)까지만 적치하십시오.

10단 이상(2톤 제품은 5단) 적치하면 박스 파손으로 제품이 손상될 수 있습니다.

• 판제 제품은 포장 박스의 크기가 같은 것끼리 적치 보관하십시오.

크기가 다른 판재 제품을 포개어 적치시 박스에 눌려 제품이 손상될 수 있습니다.

• 판재 제품 상,하차시 3박스 이상을 동시에 들지 마십시오.

박스가 파손되어 제품손상 및 주위 사람들에게 상해를 줄 수 있습니다.

• 차량 또는 선박 등으로 운반시 보조 기구를 사용하여 적재함에 단단히 고정하십시오.

제품의 유동 및 낙하로 인해 인적/물적 피해를 입을 수 있습니다.

• 코일제품 적치시 각 코일마다 고임목을 사용하지 않으면 코일제품이 무너져

제품이 손상되거나, 붕괴시 근처 작업자가 다칠 우려가 있습니다.

• 해상 운송시 바닷물에 직접 접촉되지 않게 하십시오.

바닷물로 인해 제품에 녹이 발생할 수 있습니다.

• 제품 취급시 안전장구를 착용하고 작업하십시오.

충격 및 베임 등으로 인체에 상해를 입을 수 있습니다.

• 코일 제품은 전면에서 스틸밴드를 해체하지 마십시오.

밴드가 풀릴 때 코일이 탄성으로 튕겨나와 상해를 입을 수 있습니다.

164 165



Heavy Construction Equipment Components

┃Cautions in using Track Assembly┃

• if the idler, or the floating seal of the sprocket are damaged, corroded, or worn out, the idler & sprocket may sway, causing wear out in interior of track link.

• if the track Shoe is used at a length of 700~900mm in rocky mountains, the sectional concentrated load may disconnect the bolt or damage the shoe. Please use the equipment at 600mm standard.

• Recycling or reusing Clamping Pin for the Master Pin is likely to damage the Clamping Pin and may cause the Master Pin to fall out.

• a sudden change of direction may cause the track Bolt to be shorn and fall out, which can injure people when hit by.• When lifting a side with boom and idling the track for equipment inspection, sleeves, cuffs, etc.

may get entangled or stuck, leading to injuries.• during work in rocky mountain or roadside breaker, moving of the entire device may break the stone

under the shoe board, which may hit and injure people.

┃Cautions in using Roller Assembly┃

• if the alignment of bolt holes in roller of the equipment frame is not accurate, the roller flange can be unevenly worn out.

중기 및 기계류

┃Track Assembly┃

• 아이들러 또는 스프라켓의 플로팅씨일 파손 또는 부식 마모가 되면

아이들러 & 스프라켓가 흔들려 트랙링크 내측면이 마모가 발생될 수 있습니다.

• 석산에서 트랙슈 길이를 700〜900mm를 사용할 시는 국부적 집중하중이

작용하여 볼트 절손 또는 슈 파손이 될 수 있습니다. 600mm 표준을 사용하십시오.

• Master Pin용 Clamping Pin은 한번 사용한 것을 재사용하면 Clamping Pin이

쉽게 파손되고 Master Pin이 빠짐 현상이 발생될 수 있습니다.

• 급격한 방향전환을 하면 트랙볼트가 전단되어 튕겨 나갈 수 있으며, 이것이 사람의 신체에 맞아 다칠 수 있습니다.

• 장비점검을 위해 붐대로 한쪽을 들어 놓고, 트랙을 공회전 시킬 때 옷, 소매 등이 걸려서

말려들거나, 슈 틈새에 끼어 다칠 수 있습니다.

• 석산이나 도로변 브레카 작업도중 장비 전체가 움직일때 슈판 밑에 있던 돌이

깨어지면서 날아가 사람의 몸에 맞아 다칠 수 있습니다.

┃Roller Assembly┃• 장비 프레임의 롤러 취부 볼트홀의 일직선 얼라이먼트가 맞지 않으면 롤러 플랜지부가 편마모 발생될 수 있습니다.

166

세계로 뻗어가는

현대제철은

철의 무한한 가능성을

펼쳐 나가고 있습니다

Hyundai Steel is reaching out to the world with its boundless potentials.

Hyundai Steel network

domestic network 국내사업장

Incheon Works 인천공장

인천광역시 동구 송현동 1번지1, Songhyun-dong, dong-guIncheon, 401-712, Koreatel : 82-32-760-2114 fax: 82-32-763-5046

Pohang Works 포항공장

경상북도 포항시 남구 송내동 444번지

444, Songnae-dong, nam-gu Pohang, gyeongSangBuK-do790-707, Koreatel : 82-54-271-1114 fax: 82-54-271-1241

DangjIn Works 당진공장

충청남도 당진군 송악면 고대리 167-32번지

167-32, godae-rI, SongaK-myeon dangjIn-gun, chungcheongnam-do 343-823, Koreatel : 82-41-680-0114fax: 82-41-680-1199

seoul offIces 서울 사무소

서울특별시 서초구 양재동 231

231, yangjae-dong, Seocho-guSeoul, 137-938, Koreatel : 82-2-3464-6114 fax: 82-2-3464-6090

seoul sales offIce 서울 영업소

서울특별시 종로구 신문로2가 6번지

6, SInmunno-2ga, jongno-guSeoul, 110-062, Koreatel : 82-2-772-2114fax: 82-2-772-2109, 2091

Busan sales offIce 부산 영업팀

부산광역시 사상구 감전2동 132-7

벽산디지털밸리 11층 1106호

room #1106, ByucKSan dIgITal Valley, 11F132-7 gamjeon2-dong, SaSang-gu BuSan,617-731, Koreatel : 82-51-329-7235fax: 82-51-329-7248

Daegu sales TeaM 대구 영업팀

대구광역시 수성구 수성동 2가 1번지 교보생명빌딩 8층KyoBo BuIldIng, 8F, 1, SuSeong-dong2-ga, SuSeong-gu, daegu,706-922, Koreatel : 82-53-745-1871~4,1735fax: 82-53-745-1875

Daejeon sales TeaM 대전 영업팀

대전광역시 대덕구 오정동 62-1번지

운암빌딩 5층

unam BuIldIng, 5F, 62-1ojeong-dong daedeoK-gu,daejeon, 421-814, Koreatel : 82-42-633-2061~3fax: 82-42-636-0318

gWangju sales TeaM 광주 영업팀

광주광역시 서구 농성2동 652-1번지

대한상공회의소 5층 501호

room #501, Korea chamBer oF commerce & InduSTry BuIldIng, 5F nongSeong 2-dong, Seo-gu gWangju, 502-726, Koreatel : 82-62-351-8404~7fax: 82-62-351-8644

overseas network

QIngDao facTory (chIna)TWo area oF jIaozhouWan InduSTry ParKQIngdao, Shandong, chInatel : 86-532-8727-3818fax: 86-532-8727-3816

sIngaPore152 Beach road, #11-02 gaTeWay eaST SIngaPore 189721tel : 65-6341-5080~1fax: 65-6293-5083

DuBaI (uae)al rIQQa Palace BuIldIng #908 al maKToum STreeT P.o.BoX 14113 duBaI, uaetel : 971-4-227-8752fax: 971-4-223-8396

Tokyo (jaPan)ShuWa SanBancho BuIldIng 3F, 28 SanBancho chIyoda-KuToKyo 102-0075, jaPantel : 81-3-5211-4410, 4412fax: 81-3-5211-4413

BeIjIng (chIna)room #1603, XIan daI QI che da Sha#38 XIao yun road chao yang BeIjIng, chIna tel : 86-10-8453-9228~9fax: 86-10-6467-0706

hong kong (chIna)room #6, unITS noS1212-121512F, The meTroPolIS ToWerno.10 meTroPolIS drIVehunghom, KoWloon hong Kongtel : 852-3162-5313fax: 852-3162-5315

hanoI (VIeTnaM) room #601, IcT BuIldIng, 10/81 lInh lang STreeThanoI VIeTnamtel : 84-4-766-7797fax: 84-4-766-7812

la (usa)10550 TalBerT aVenue FounTaIn Valley ca 92728 uSatel : 1-714-594-1699fax: 1-714-594-1636

frankfurT (gerMany)KaISerleIPromenade 563067 oFFenBach, germanytel : 49-69-271472-790(708~783)fax: 49-69-271472-799(797~799)

BrIsBane (ausTralIa)leVel 36 rIParIan Plaza.71 eagle ST. BrISBane,Qld 4000, auSTralIatel : 61-7-3121-3351

ToKyo(jaPan)

QIngdao FacTory(chIna)

hanoI(VIeTnam)

hong Kong(chIna)

BeIjIng(chIna)

duBaI(uae)

FranKFurT(germany)

SIngaPore

BrISBane(auSTralIa)

la(uSa)

Documents

ProductsGuide-sheetpile 규격