Products Valves Sanitary Pbm Series 9, 2 Way

S & CS Igenix® 2-WaySERIES & Clean Steam

Forged or LowFerrite Cast

CT Igenix® TrapSERIES Valve

FI Igenix® FlushSERIES Tank Valves

AF Angle StemSERIES Flush Tank

DI 3-WaySERIES Diverter Valves

MI 3, 4, & 5-WaySERIES Multi-port Valves

FF Fabflex® ManifoldSERIES Assemblies

PA AutomationSERIES & Controls

SI V-ball ValvesSERIES for Flow Control

S-, S2, Rising Stem S3 Sampling Valves

HH Pipe and TubingSERIES Hangers

CV Sanitary& HV Check Valves

www.pbmvalve.com

SANITARYvalves & products

Features

2

Adjust-O-Seal® featuren PBM valves provide bidirectional upstream sealing. Seats are compressed

tightly against the ball in the valve.

n Body bolts can be tightened to compensate for normal seat wear without having to remove the valve from service.

Seals at upstream seatSeals at

downstream seat

PBM’s DesignCompetitor’s Design

Valve body bolts compress valve seatsagainst the ball, providing bidirectionalsealing at the upstream seat. Tocompensate for seat wear, body boltscan be slightly tightened to re-compressseats against ball.

Line pressure pushes ball downstreamin the ball-closed position, providingsealing at the downstream seat. Thereis no adjustment to compensate forseat wear.

PBM valves offer value over the life ofthe product with:n Fewer process interruptionsn Longer Lifen Clean/drain without process interruptionn Improved product yields

PBM also offers:n On-time deliveryn Documentationn Solutions to tough applications

This means on valves mounted verticallylike PBM’s angle stem flush tank valve, thevalve seats on the upstream seat, thusallowing the body to be purged anddrained without process interruption.

Sanitary Valves

3

Table of ContentssITEM PAGEFeatures 2

Ordering Information, Product Codes 4-5

Materials of Construction, Alloys 6

Seat & Seal Materials, O-ring Materials 6

Allowable Working Pressures and Temperatures 7

Cv Factors 8

Polish Standards and Finishes 8

Torque Values 9

Testing 1 0

Available Options 1 0 - 1 1

Flow Patterns for 3, 4, and 5-way Valves 12-13

Written Specifications 14-15

DIMENSIONAL INFORMATION, MANUAL & AUTOMATED

SI and CS Series Igenix® 2-way, Forged and Cast 16-19

FI Series Igenix® Flush Tank 2 0

DI Series Igenix® 3-Way Diverter 21

Fire-Rated Valves 22-23

Angle Stem Flush Tank 24-25

MI Series Igenix® 3, 4, & 5-Way Multi-Port 26-27

S-, S2, & S3 Series Rising Stem Sampling Valves 28-29

UNIQUE APPLICATION VALVES

Igenix® Trap Valve 30-31

Self-Cleaning Ball Valve 32

Spray Ball Valve 33

Sampling Valve 33

Fabflex® Manifolds 34

3-Way Piggable 3 5

Igenix® Control Valves, V-ball 35

Automation & Controls 36-37

ULTRA-SANITARY CHECK VALVE USES NO SPRINGS OR GUIDES

Sanitary Check Valves, Vertical and Horizontal 38-39

SANITARY PIPE & TUBING HANGERSPipe and Tubing Hangers 40-43

REPRESENTATIVE LOCATIONS

Representative Locations 44

Ordering InformationNumber in "( )" represents part number position.

Product (1-2) Material (3-4) Size ( 5) Series (6) End Connection (7-8) Seat & Seal / Filler / O-ring (9)

SI Sanitary 2-way H- 316 Stainless A 1/4" 9 Low ferrite (Cast SI, CS, FI, A- Acme Bevel G TFMTM / None / Viton

SM Sanitary Steam 2-way HF F316L Forged B 3/8" DI, DC, CT, SM, SA, FA, FF, F- Ext. Buttweld for Tube H S/S TFE / None / Viton

SA Aseptic 2-way HL 316L Stainless C 1/2" SM) FX- Ext. Buttweld X-Clamp I S/S TFE / VTFE / Viton

CS Clean Steam 2-way C- Hastelloy C-276 D 3/4" A Fire-rated cast SI, FI G- Cherry Burrel I-Line J TFM / VTFE / Viton

CT CS Trap Valve P- AL6XN E 1" 8 Forged SI, SM, CS, CT, FI, H- Male CBI C VTFE / None / Viton

AF Angle Stem FT T- Gr 5 Titanium F 1 1/4" DI (F316L only) I- Swagelok "TS" D VTFE / VTFE / Viton

DI Sanitary Divert 3-way Y- Hastelloy C-22 G 1 1/2" 1 AF SM SwagelokTM K UHMWPE / None / Viton

DC Diverter CS 3-way H 2" 3 AF Fire-rated X- Tri-ClampTM Tube L UHMWPE / VTFE / Viton

FF FabflexTM Other materials J 2 1/2" 4 MI T VTFE / None / EPR

FI Sanitary FT 2-way available K 3" U VTFE / VTFE / EPR

MI Sanitary Multi-port L 4" Z TFM / None / EPR

DIN 11850 / ISO 1127 M 6" 0 S/STFE / None / EPR

DIN N 8" 1 S/STFE / VTFE / EPR

SI Sanitary 2-way P 10" 2 TFM / VTFE / EPR

SM Steam 2-way DIN / ISO 3 UHMWPE / None / EPR

CS Clean Steam DIN 1 8 4 UHMWPE / VTFE / EPR

ISO 2 10 5 UHMWPE / UHMWPE / EPR

SP Sanitary 2-way 3 15 6 PEEK / None / Viton

SG Steam ISO 4 20 7 VTFE / None / Encapsulated Viton

SD Clean steam ISO 5 25 TFMTM is a registered trademark

6 32 of DyneonTM, a 3M Company

7 40

8 50

9 65

V 80

W 100

Y 150

2-way forged steam*Flush tank forged

FI

8

2-way cast steam*Flush tank cast

9

CAST VALVES < 2% FERRITECSDCFC

DI

FC

* CONSULT PBM FOR PRESSURE / TEMPERATURE RATINGS

CSDCFC

3-way diverter cast3-way diverter cast steam*

DM

FI

SM

Flush tank forged

2-way cast

FISI

Encapsulated seats Steam service

2-way forged SISM

Standard Seats

FORGED VALVES < 1% FERRITECSCS

Series 8 & 9 Sanitary Ball Valve Product CodesAll sanitary valves are True-BoreTM

Valve Type Series

Standard Options1 + 2 3 + 4 5 6 7 + 8 9 10 + 11 12 13 + 14 15

Product Material Size Series End Fitting Seat/Seal Flow Pattern Ball/Stem Operator Polish

Purge Ports.

Ball Flats

SI HL H 9 XF G - - G 34 ASIHLH5XFG - - G34A is the code for a Sanitary 2-way, 316L stainless steel, 2 inch True-Bore® tube size, Series 5, Hygenic clampby extended butt weld tube ends, TFM™ seats and seals, 17-4 PH stem, 80 psig Spring Return Actuator, 20 Ra I.D. polish.

Ordering Information

Flow Pattern / Flush Tank Pad / Aseptic (Pos 10-11) Ball / Stem (Pos 12) Operator (13-14) Polish (15) (max values)

For Non-Flow Pattern, Non-Flush Tank, Non Aseptic, Use " - - " - Standard - - w/ lever operator - No polish

For Valves with Flow Patterns, enter the 2 digit flow pattern no. F Internal/external ground 01 w/o handle A 20 RA ID

For all non-aseptic Flush Tank Valves, Use codes below G w/ 17-4 PH stem 02 w/o handle, w/ actuator prep B 32 RA OD

- - Standard Flush Tank Pad 03 w/ handle, w/ actuator prep. C 20 RA ID, 32 RA OD

01 No Pad w/o shipping pad 04 w/ locking handle D 15 RA ID

02 No Pad w/ shipping pad 05 w/ stainless oval handwheel E 10 RA ID

04 w/ 316L barstock pad 06 w/ manual safety nut F 20 RA ID after

05 w/ 1" bolt on flat pad 07 w/ 45 degree handle electropolish

06 w/ 1.5" bolt on flat pad 08 w/ gear operator G 15 RA ID after

07 w/ 2" bolt on flat pad 10 w/ manual spring return handle electropolish

08 w/ 3" bolt on flat pad 11 w/ fusible link spring return H 10 RA ID after

09 w/ 4" bolt on flat pad handle electropolish

10 w/ 6" bolt on flat pad 12 w/ vane actuator for 80 psig I 5 RA ID

11 w/ 8" bolt on flat pad 13 w/ nema 4 120 VAC electric actr K 5 RA ID & 32 RA OD

For all aseptic valves, use the codes below: 14 w/ nema 7 120 VAC electric actr L 20 RA ID & 32 RA OD

Purge Ports (10) Ball Flats & holes (11) 15 w/ square operating nut after electropolish

A (1) 1/2" Tri-Clamp on center #1 #2 Use column #1 for 16 w/ locking handle,w/ actr mount M Electropolish only

90 degree from stem 2 way or aseptic FT body (ID & OD)

B (1) 1/2" Tri-Clamp on center w/ std. Pad. Use 17 w/ 4" ext. locking oval handwheel N 10 RA ID & 32 RA OD

opposite stem column #2 if valve is 18 w/ 4" ext. locking lever handle O 15 RA ID & 32 RA OD

C (1) 1/2" Tri-Clamp upstream aseptic FT with 20 w/ DA 80 psig actr. after electropolish

90 degree from stem shipping pad. 21 w/ DA 80 psig actr., N 4 L.S. Q 15 RA ID & 32 RA OD

D (1) 1/2" Tri-Clamp downstream A K flats, closed. dwnstrm 22 w/ DA 80 psig actr, N 4 Sol. S 10 RA ID & 32 RA OD

opposite stem B L flats, closed, upstrm 23 w/ DA 80 psig actr, N 4 L.S. & Sol. after electropolish

E (2) 1/2" Tri-Clamp on center, C M flats, open, upstrm 24 w/ DA 80 psig actr, N 7 L.S.

90 deg. from & opposite stem D N flats, open, dwnstrm 25 w/ DA 80 psig actr, N 7 Sol. Optional 16th Position

F (2) 1/2" Tri-Clamp upstream 90 E O flats, open, up & 26 w/ DA 80 psig actr, N 7 L.S. & Sol. LOX Cleaning (16)

degree from & downstream downstream 27 w/ DA 60 psig actr. L Oxygen Service Cleaning

opposite stem F P holes, closed, dwnstr 28 w/ DA 60 psig actr., N 4 L.S. per PBM Procedure

G (1) 1/2" BWTE on center, 90 G Q holes, closed, upstrm 29 w/ DA 60 psig actr, N 4 Sol.

degree from stem H R holes, open, upstrm 30 w/ DA 60 psig actr, N 4 L.S. & Sol.

H (1) 1/2" BWTE on center, I S holes, open, dwnstrm 31 w/ DA 60 psig actr, N 7 L.S.

opposite stem J T holes, open, up & 32 w/ DA 60 psig actr, N 7 Sol.

I (1) 1/2" BWTE Upstream, 90 downstream 33 w/ DA 60 psig actr, N 7 L.S. & Sol.

degree from stem - U No flats or holes 34 w/ SR 80 psig actr. Operator (13-14) continued

J (1) 1/2" BWTE downstream V 2 std width slotted ball 35 w/ SR 80 psig actr., N 4 L.S. Codes for Asco Limit Switch

opposite stem W 3 30 degree V ball 36 w/ SR 80 psig actr, N 4 Sol. 55 w/ DA 80 actr., N 4 L.S.

K (2) 1/2" BWTE on center, 90 X 4 45 degree V ball 37 w/ SR 80 psig actr, N 4 L.S. & Sol. 56 w/ DA 80 actr, N 4 L.S. & Sol.

degree from & opposite stem Y 5 60 degree V ball 38 w/ SR 80 psig actr, N 7 L.S. 57 w/ DA 80 psig actr, N 7 L.S.

L (2) 1/2" BWTE upstream 90 Z 6 90 degree V ball UNIQUE PART 39 w/ SR 80 psig actr, N 7 Sol. 58 w/ DA 80 actr, N 7 L.S. & Sol.

degree from & downstream 1 7 120 degree V ball NUMBERS 40 w/ SR 80 psig actr, N 7 L.S. & Sol. 59 w/ DA 60 psig actr., N 4 L.S.

opposite stem 8 9 self flushing ball FXXX, GXXX 41 w/ SR 60 psig actr. 60 w/ DA 60 actr, N 4 L.S. & Sol.

- no purge. Use only if adding "-XXX" designates a 42 w/ SR 60 psig actr., N 4 L.S. 61 w/ DA 60 psig actr, N 7 L.S.

ball flats or drain holes unique part number 43 w/ SR 60 psig actr, N 4 Sol. 62 w/ DA 60 actr, N 7 L.S. & Sol.

where PBM's traditional 44 w/ SR 60 psig actr, N 4 L.S. & Sol. 63 w/ SR 80 psig actr., N 4 L.S.

part number cannot 45 w/ SR 60 psig actr, N 7 L.S. 64 w/ SR 80 actr, N 4 L.S. & Sol.

completely describe the 46 w/ SR 60 psig actr, N 7 Sol. 65 w/ SR 80 psig actr, N 7 L.S.

valve. For example, a 47 w/ SR 60 psig actr, N 7 L.S. & Sol. 66 w/ SR 80 actr, N 7 L.S. & Sol.

special actuator, solenoid, 51 w/ DA 80 psig actr, beacon 67 w/ SR 60 psig actr., N 4 L.S.

or end fitting on a valve 52 w/ DA 60 psig actr, beacon 68 w/ SR 60 actr, N 4 L.S. & Sol.

may require a unique part 53 w/ SR 80 psig actr, beacon 69 w/ SR 60 psig actr, N 7 L.S.

number that matches 54 w/ SR 60 psig actr, beacon 70 w/ SR 60 actr, N 7 L.S. & Sol.

PBM's Engineering

Assembly drawing

number.

Notes:1. All options are not available on all valve styles. Consult factory.2. On ID polish valves, the body, ball, seat retainer (if applicable), and end fitting are polished. On ID/OD polish valves, the body, ball, seat retainer (if applicable), end fitting, handle, and stem are polished. On ID with electro-polish, the body, ball, seat retainer (if applicable), end fitting, and stem are polished.

Sanitary Valves

6

Materials316L Stainless Steel

Castings comply with A351, A l l oy CF3M.Forgings (Series 8) comply with A182, A l l oy F316L and 1.4404.Bar product complies with A479, A l l oy S31603.Cast weld pads comply with SA 351, A l l oy CF3M and wrought weld pads comply with SA 479, A l l oy S31603.

• Has a low (<0.03%) carbon level to reduce carbide precipitation. • Is ex t re m e ly corrosion resistant to acidic and basic environments and does not pit easily.• Can be mech a n i c a l ly polished to a near- m i r ror finish for easy cleanability (electro polishing also ava i l a b l e ) .• Is pre f e r red for sanitary and biotechnological uses.• Extended butt weld ends have a sulfur content of 0.005 to 0.017% to support orbital we l d i n g .• L ow ferrite cast product is available for all product lines. Standard ferrite level of Series 8 forgings is less than 1%

and standard ferrite level of Series 9 castings is less than 2%.O t h e r• Additional materials available include AL6XN, duplex stainless, Hastelloy alloys, A l l oy 20, titanium alloys, and

Inconel alloy s .

Seat and Seal Materials

NOTES:1. PTFE is Polytetrafluorethylene.2. Seat and seal materials may be mixed in a valve in order to provide media-compatibility and the appropriate torque, temperature and pressure ratings.

Designation Description Color Purpose

TFM®

Chemically ModifiedPTFE

PBM Standard for Series 8, 9 & 6

White

This chemically modified PTFE material is PBM’s standard seat and sealmaterial. It combines the ruggedness of a filled PTFE with the low coefficientof friction of virgin PTFE. TFM also has much improved porosity control anddeformation under load when compared to PTFE grades. FDA and USP Class VIcompliant. Meets bubbletight seat leakage.

VTFE Virgin PTFE White A low stem torque material ideal for sanitary use. FDA and USP Class VIcompliant. Meets bubbletight seat leakage.

S-TEFTM Stainless SteelReinforced PTFE

CharcoalGray

A suitable material for higher pressure/temperature applcations. Higher stemtorque than virgin grades and TFM. USP Class VI compliant. Meets bubble-tight seat leakage.

UHMWPEUltra High MolecularWeight Polyethylene Off White

Suitable for applications under 200˚F. An extremely wear resistant materialhaving a wear rate about 1/10th that of PTFE. FDA compliant and is used inhigh cycle applications where possible. Meets bubbletight seat leakage.

PEEK Poly ether ether ketone Putty

For applications up to 500˚F. PEEK is a rugged, high strength material havingfairly high stem torque. FDA compliant. PBM’s PEEK is 10 weight percent PTFEto reduce the hardness of virgin PEEK. FDA compliant and meets Class V seatleakage.

KYNAR® Polyvinylidene FluorideSlightly

TransparentWhite

Suitable for applications under 250˚F. Kynar has been used successfully inabrasive service and is suitable for radiation environments where gamma levelsaccumulate to 1,000 megarads. FDA and USP Class VI compliant. Meetsbubbletight seat leakage.

Sanitary Valves

7

Allowable Working Pressures (psig, barg)

Non-FlangedValve Style/Series Material

Size -20˚F to 100˚F/-28.9˚C to 37.8˚C 300˚F/148.9˚C 450˚F/232.2˚C

Inches/DIN psig barg psig b a r g psig barg

SI, FT, FI Series 6 316 SS/316L 3” (DN80) and under 720 49.6 620 42.7 540 37.2

SI, CS, DI, DCSeries 8

316 SS/316L All 600 41.4 455 31.4 397 27.4

C-276 All 740 5 1 . 0 655 45.2 620 42.7

SI, CS, DI, DCSeries 9

316 SS/316L

1-1/2” (DN40) and smaller 900 62.1 770 53. 1 680 46.92” (DN50) thru 4” (DN100) 720 49.6 620 42.7 540 37.2

6” (DN150) 375 25.9 3 2 0 22.1 280 19.3

C-2764” (DN100) and smaller 6 0 0 4.14 510 35.2 450 31.0

6” (DN150) 375 25.9 3 2 0 22.1 280 19.3

MIAll Series 4

316 SS/316L 3/4” (DN20) and smaller 900 62.1 770 53. 1 680 46.9

316 SS/316L 1” (DN25) thru 4” (DN100) 720 49.6 620 42.7 540 37.2

316 SS/316L 6” (DN150) 275 19.0 205 14.1 195 1 3 . 4

C-276 3/4” (DN20) and smaller 900 62.1 770 53.1 680 46.9

C-276 2” (DN50) thru 4” (DN100) 720 49.6 620 42.7 540 37.2

C-276 6” (DN150) 275 19.0 205 14.1 195 13.4

AF Series 1

316 SS/316L 1-1/2” (DN40) and smaller 900 62.1 770 53. 1 680 46.9

316 SS/316L 2” (DN50), 4” (DN100) 550 37.9 540 37.2 525 36.2

316 SS/316L 3” (DN80) 625 43.1 610 42.1 600 41.4

316 SS/316L 6” (DN150) 375 25.9 365 25.2 360 24.8

C-276 1-1/2” (DN40) and smaller 600 41.4 520 35.9 475 32.8

C-276 2” (DN50), 4” (DN100) 550 37.9 540 37.2 525 36.2C-276 3” (DN80) 600 41.4 520 35.9 475 32.8

C-276 6” (DN150) 375 25.9 3 2 0 22.1 280 19.3

AF Series 3

316 SS/316L 1-1/2” (DN40) and smaller 720 49.6 620 42.7 540 37.2

316 SS/316L 2” (DN50), 4” (DN100) 550 37.9 540 37.2 525 36.2

316 SS/316L 3” (DN80) 625 43.1 610 42.1 600 41.4

316 SS/316L 6” (DN150) 375 25.9 365 25.2 3 6 0 24.8

FI, FCSeries 8 & 9

316 SS/316L 4” (DN100) and smaller 6 0 0 4.14 510 35.2 440 30.3

316 SS/316L 6” (DN150) 375 25.9 320 22.1 280 19.3

C-276 4” (DN100) and smaller 6 0 0 4.14 510 35.2 440 30.3C-276 6” (DN150) 375 25.9 320 22.1 280 19.3

Notes: 1. Bronze, 316 SS and C-276 retain their CWP below minus 20˚F.2. All valves rated for full vacuum.3. Sanitary clamps and gaskets may limit pressure ratings to less than shown above.

Sanitary Valves

8

Cv Values (gpm)

VALVESIZE

2-WAYSERIES 8 & 9 FLUSH TANK DIVERTER PORT

SERIES 8 & 9MULTI-PORT

SERIES 4 CT Valves

SI, CS AF FI DI SERIES, X-ENDS MI SERIES 4, X-ENDS Trap Position

End Connection X-END X-ENDL-PORT

T-PORTL-PORT

T-PORTL-PORT

Series Series

F- X- Series 1 Series 8 & 9 Straight Branch Straight Branch 5 8

1/2" 6.5 8.0 8.9 4 . 0 4.7 3 . 0 4.0 4.7 3.0 4 . 0 0.72 0.41

3/4" 23 28 34 12 15 9.0 12 1 5 9.0 12 0.72 0 . 7 2

1" 55 65 63 62 25 29 18 25 29 18 25 .96 0 . 9 6

1 1/2" 160 193 1 5 0 175 68 81 49 68 81 49 68 2.8 2.8

2" 365 4 2 0 280 480 133 160 92 133 160 92 118 2.7 2.7

2 1/2" 700 800

3" 900 1.040 505 870 324 390 233 324 390 233 278 5.4 5.4

4" 1,800 2,080 690 1,550 590 715 430 590 715 4 3 0 510 15 15

6" 4,200 5,000 1,430 3,750 1,450 1,750 1,040 1,450 1,750 1 , 0 4 0 1,160 40

* F- (extended buttweld) end* X- (Tri-ClampTM) end

ID Surface Finish. Ra Readings for Valves per ASME BPE(Bioprocessing Equipment)PBM’s IGENIXTM forged valves have a standard internal polish of 20 Ra Max/0.50 µm or better.

*PBM Polish Code “A” **PBM Polish Code “G”

O-Ring and Seat CompliancyCompliancy

Material FDA USP Class VI 3AO-ring* E3609-70 (EPR) Yes Yes No

O-ring* V0680-70 (Viton) Yes No YesSeat Virgin TFMTM Yes Yes Yes

*O-rings used in “Clean Steam” Series CS, CT, FC, DC.

SurfaceDescription

PBM Polish Code

Ra max.

µ-in. µm

Mechanical PolishSFV 1 A 20 0.5

SFV 2 - 25 0.825SFV 3 - 30 0.75

Mechanical polish and electropolishSFV 4 G 15 0.375

SFV 5 F 20 0.5SFV 6 - 25 0.625

Sanitary Valves

9

Stem TorqueTFM® and VTFE Seats

ValveStyle/Series

Valve Size As builtTorque

Minimum Actuator Sizing Torque vs Differential Pressure Across Seats

0 100 psig/6.9 barg

200 psig/13.8 barg

300 psig/20.7 barg

400 psig/27.6 barg

500 psig/34.5 barg

600 psig/41.4 barg

700 psig/48.3 barg

All Series8 & 9

2-Wayand

3-Way

1/4 and 3/8 in-lbs. 25 50 50 50 50 50 50 50 50DN 8/10 N/m 2.8 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7

1/2 in-lbs. 25 50 50 50 50 50 50 50 50DN 15 N/m 2.8 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7

3/4 in-lbs. 30 60 60 60 60 60 60 60 80DN 20 N/m 3.4 6.8 6.8 6.8 6.8 6.8 6.8 6.8 9.0

1 in-lbs. 50 100 100 100 130 160 220 trunnionDN 25 N/m 5.7 1 1 .3 1 1 .3 1 1 .3 14.7 18.1 24.9 trunnion1-1/2 in-lbs. 132 264 264 375 500 600 trunnion

DN 40 N/m 1 4 .9 29.8 29.8 42.4 56.5 6 7 . 8 trunnion2 in-lbs. 182 364 364 635 910 1,180 trunnion

DN 50 N/m 20.6 41.1 41.1 71.8 102.8 133 trunion2-1/2 in-lbs. 288 576 576 1,200 1,600 trunnion

DN 65 N/m 32.5 65.1 65.1 136 181 trunnion3 in-lbs. 430 860 860 1,560 trunnion

DN 80 N/m 49 97.2 97.2 176 trunnion4 in-lbs. 672 1,340 2,250 trunnion

DN100 N/m 76 151 254 trunnion6 in-lbs. 1,920 3,840 7, 100 Use trunnion above 75 psid

DN 150 N/m 217 434 802 Use trunnion above 75 psid

AFSeries 1

andSeries 3

1 in-lbs. 58 1 1 6 116 116 150 185 220 255 288DN 25 N/m 6.6 1 3 . 1 13.1 13.1 17.0 20.9 24.9 28.8 32.51-1/2 in-lbs. 132 264 264 3 7 5 500 600 725 850 950

DN 40 N/m 14.9 29.8 29.8 4 2 . 4 56.5 67.8 81.9 96.1 1072 in-lbs. 154 3 0 8 308 440 580 715 850

DN 50 N/m 17.4 34.8 34.8 49.7 65.5 80.8 96.13 in-lbs. 336 675 675 1,400 1,900 2,400 2,900 3,400

DN 80 N/m 38.0 76.3 76.3 158 2 1 5 2 7 1 328 3844 in-lbs. 432 860 860 1,560 2,050 2,540 3,030

DN 100 N/m 49 97.2 97.2 176 232 287 3426 in-lbs. 1 ,056 2,100 3,950

DN 150 N/m 1 19 237 446

MISeries 4

1/2 in-lbs. 77 144 144 144 144 144 144 144 144DN 15 N/m 8.7 16.3 16.3 16.3 16.3 16.3 16.3 16.3 16.3

3 / 4 in-lbs. 77 144 144 144 144 144 144 144 144DN 20 N/m 8.7 16.3 16.3 16.3 16.3 16.3 16.3 16.3 16.3

1 in-lbs. 192 385 385 385 385 385 385 440 trunnionDN 25 N/m 21.7 43.5 43.5 43.5 43.5 43.5 43.5 49.7 trunnion1-1/4 in-lbs. 192 385 385 385 385 385 385 440 trunnion

DN 32 N/m 21.7 43.5 43.5 43.5 43.5 43.5 43.5 49.7 trunnion1-1/2 in-lbs. 384 770 770 770 940 trunnion

DN 40 N/m 43.4 87.0 8 7 . 0 87.0 1 0 6 trunnion2 in-lbs. 432 865 865 865 1,200 trunnion

DN 50 N/m 48.8 97.7 97.7 97.7 136 trunnion3 in-lbs. 864 1,730 1,730 trunnion

DN 80 N/m 98 196 196 trunnion4 in-lbs. 1,920 3,840 3,840 trunnion

DN 100 N/m 217 434 434 trunnion6 in-lbs. 3,000 6,000 8,800 Use trunnion above 75 psid

DN 150 N/m 339 678 994 Use trunnion above 75 psidNotes:

1. For valves with RTFE or UHMWPE seats, multiply the above values by 1.252. For valves which have S/Tfe or Kynar seats, multiply the above values by 1.56.3. For valves with PEEK seats, multiply the above values by 1.7.4. Where trunnion is indicated, PBM recommends trunnion mounting the ball to avoid excessive seat loads and stem torques.5. For Series 8 & 9 CS 2-1/2” & larger valves in steam service and having RTFE seats, multiply minimum TFM/VTFE actuator torques by 1.56.6. To convert in-lbs. torques to N-m, multiply by 0.113.

Sanitary Valves

10

Testing Options

n Cryogenic n V-Balls for Flow Controln Manual Spring Return Handles n Internal & External Groundingn LOX (Cleaned for Oxygen Service) n Mechanical & Electro-Polishingn Body Cavity Fillers n Direct Mount Actuationn Steam Seats (Encapsulated) n Positionersn Purge Ports (SIP/CIP) n Fieldbus, AS-i, DeviceNetn Fire Rated, API 607 n Ball Flats and Purge Holesn Dribble Control Units n Locking Handlen High Alloys n Extended Locking Handlen Fabflex® Manifolds n Cylindrical Radius Weld Padsn Self Cleaning Flushable Ball

n Vacuum Testingn Cycle Testingn Shock and Vibrationn Seismicn Hydrostaticn Material Test Reports

- Physical testing- Chemical testing

Steam Valves

Sanitary Valves

1

Options

Locking Handle

Purge Ports, Milled Flats andPurge Holes

Cylindrical Radius Pad

Cavity Fillers

Direct Mount Actuation

Sanitary Valves

12

Flow Pattern Diagrams

The diagrams show the top view as though you were looking down on the stem. White areas indicatethe path available for process flow. Shaded areas indicate unused ports for a given flow position.

Diverter Port Patterns 3-Way Multi-Port Patterns3 - way Multi-Ports are a popular choice in a variety of industries. Aseal at every port distinguishes the 3-way MP/MI Series va l ve fromd iverting-type va l ves. In some applications, the 3-way MP/MI va l vecan take the place of two or three 2-way va l ves, with correspondings avings in piping and fittings. For applications requiring simultaneousprocess line changes, two 3-way MP/MI Series va l ves may be mountedin tandem and controlled with a single actuator or handle for greatercontrol and additional savings.Additional flow patterns are possible byusing manifolds of two or more va l ve s . .

By specifying a T- Port, Double T- Port, Angle Port (L) orDouble Angle Port (LL) Ball, different flow configurations arepossible. For example, a DP va l ve with a T- Port Ball mightbe used to control flow to one or two simultaneouso p e rations. The side entry Angle Port Ball and the bottomentry Double Angle Port Ball are ideal for connecting tworelief va l ves to a system. The Double Angle Port Ball dive r t sf l ow from one outlet to another outlet 180° away, with only90° stem rotation. This allows use of 90° double acting orspring return actuation, instead of 180°.

C o d e 0 3 0 4 0 6 10 T- Po r t T- Po r t T- Po r t L - Po r t

90° Tu r n 90° Tu r n 180° Tu r n 90° Tu r n

Position A

Position B

Position C

0 1 0 2 0 3 0 4 0 5 0 6 0 7

T- Po r t T- Po r t T- Po r t T- Po r t T- Po r t T- Po r t T- Po r t90° Tu r n 90° Tu r n 90° Tu r n 90° Tu r n 180° Tu r n 180° Tu r n 180° Tu r n

Position A

Position B

Position C

0 8 0 9 1 0 1 1 1 2 1 3

T- Po r t T- Po r t L - Po r t L - Po r t L - Po r t L - Po r t180° Tu r n 360° Tu r n 90° Tu r n 180° Tu r n 180° Tu r n 360° Tu r n

1 4 1 5 1 6 1 7 1 8 1 9L - Po r t L - Po r t T- Po r t T T- Po r t L L - Po r t L - Po r t

360° Tu r n 180° Tu r n 90° Tu r n 180° Tu r n 90° Tu r n 90° Tu r n

Position A

Position B

Position C

Position D

Position A

Position B

Position C

Position D

BOTTOM ENTRY

1 4 1 5 1 6 1 7 1 8L - Po r t L - Po r t T- Po r t T T- Po r t L L - Po r t360° Tu r n 180° Tu r n 90° Tu r n 180° Tu r n 90° Tu r n

Position A

Position B

Position C

Position D

SIDE ENTRYSIDE ENTRY

BOTTOM

ENTRY

Sanitary Valves

13

4 - way Multi-Ports are a true multi-port va l ve with seals at eve r yport. This design makes the 4-way MP/MI Series ideal for flowsw i t ching operations. In some applications, this va l ve canreplace as many as four ordinary 2-way va l ves, withcorresponding savings in piping and fittings. The follow i n gi l l u s t rations show how different ball and port configura t i o n screate many flow patterns with a single 4-way Multi-Po r t .

4-Way Multi-Port Patterns

2 0 2 1 2 2 2 3 2 4 2 5 2 6 2 7

Double L-Po r t Double L-Po r t Double L-Po r t Double L-Po r t Double L-Po r t Double L-Po r t L - Po r t T- Po r t

90° Tu r n 180° Tu r n 180° Tu r n 180° Tu r n 180° Tu r n 360° Tu r n 360° Tu r n 90° Tu r n

4-Way Multi-Port Patterns

3 7 3 8 3 9 4 0 4 1 4 2 4 3

Double L-Po r t L - Po r t L - Po r t T- Po r t S t raight Po r t T- Po r t T- Po r t90° Tu r n 180° Tu r n 360° Tu r n 180° Tu r n 90° Tu r n 90° Tu r n 90° Tu r n

Position A

Position B

Position C

Position D

5-Way Multi-Port Patterns5 - way Multi-Ports are 5-seated to provide positive shut-off and flowcontrol at each port. This design is not only versatile, but extremelyeconomical. In some applications, this va l ve can replace as many asfour ordinary 2-way va l ves, with corresponding savings in pipingand fittings. The following illustrations show available flow patternswith a single 5-way Multi-Port va l ve.

4 4 4 5 4 6 4 7 4 8 4 9 5 0 5 1

L - Po r t Double L-Po r t T- Po r t Double T- Po r t Double T- Po r tDouble T- Po r tDouble T- Po r tDouble L-Po r t360° Tu r n 180° Tu r n 90° Tu r n 90° Tu r n 90° Tu r n 180° Tu r n 360° Tu r n 360° Tu r n

Position A

Position B

Position C

Position D

2 8 2 9 3 0 3 1 3 2 3 3 3 4 3 5

Double T- Po r tDouble T- Po r t Double T- Po r t Double T- Po r t Double T- Po r t Double T- Po r t Double T- Po r tDouble T- Po r t180° Tu r n 180° Tu r n 180° Tu r n 180° Tu r n 360° Tu r n 90° Tu r n 90° Tu r n 90° Tu r n

3 6

Double T- Po r t90° Tu r n

BOTTOM

ENTRY

BOTTOM

ENTRY

SIDE ENTRY

Sanitary Valves

14

FORGED VALVESSI-Series 8 (1/2” through 4”, DIN 11850 DN 8 through DN 100, ISO 1127 DN 8 through DN 80) PBM’s Forged IGENIX® Sanitary Series 8, “True Bore®”ball valve with port through ball, seats, and end fittings same as ID of tubing. Forged 316 L stainless steel body and end fittings per ASTM A182F316L /DIN 1.4404, wrought or forged 316L ball and stem, less than 1% ferrite, three piece swing-out valve design. Seats and seals shall be white TFM®. Seatsshall provide both upstream and downstream bubbletight seal and be adjustable for inline wear. Stem packing shall be live loaded white TFM® and S-TEF™ material. End fittings shall match to tubing connections. Orbital weld end fittings should have wall thickness to match connecting tubing and havea controlled sulfur content of 0.005% through 0.017%. Valves shall not require disassembly for welding. Body bolts and nuts shall be 18-8 stainlesssteel. Interior surfaces shall be 20 RA or better with optional electropolish and finer mechanical finishes. Valve shall have integral mounting pad to allowadaptation to ISO 5211 for direct mount automation. All materials are FDA and USP23 Class VI compliant. Maximum working pressure to be 720 PSIGand full vacuum. To add automation and controls, see section “Automation and controls”.PBM Model number SI (material)(size)8(end connection)Flush Tank Model number FI (material)(size)8(end connection)

CS-Series 8 (1/2” through 4”, DIN 11850 DN 8 through DN 100, ISO 1127 DN 8 through DN 80) PBM’s IGENIX® Clean Steam Series 8. SameSpecification as SI-Series 8 above. Add text “Seats and seals shall be white TFM® with FDA approved EPR O-ring energizer. Seats shall have stainlesssteel encapsulation on ID. Body seal shall be FDA approved EPR o-rings with white TFM® back up seal. Optional 300 Series s/s 4” stem extension withlocking lever handle for 4” thick installation.PBM Model number CS (material)(size)8(end connection)Trap valve model number CT (material)(size)8(end connection)

CAST VALVESSI-Series 9 (1/2” through 6”, DIN 11850 DN 8 through DN 150, ISO 1127 DN 8 through DN 100) PBM’s IGENIX® Sanitary Series 9 “True Bore®” ballvalve with port through ball, seats, and end fittings same as ID of tubing. Type (316 L stainless steel with less than 2% ferrite, , hastelloy C-276 or C22, orother) body, ball, stem, and end fittings, three piece swing-out valve design. Seats and seals shall be combined “cartridge” and be white TFM®. Seatsshall provide both upstream and downstream bubbletight seal and be adjustable for in-line wear. Stem packing shall be live loaded white TFM® or S-TEF™ material. End fittings shall match to tubing connections. Orbital weld end fittings should have wall thickness to match connecting tubing and havea controlled sulfur content of .005% through .017%. Valves shall not require disassembly for welding. Body bolts and nuts shall be 18-8 stainless steel.I.D. and O.D. surface finish shall be the same as specified for tubing. Maximum working pressure to be 400 PSIG and full vacuum. Valves shall be non-fire rated design unless otherwise specified. To add automation and controls, see section “Automation and controls”.PBM Model number SI (material)(size)9(end connection)

SM-Series 9: Same specification as SI above. Add text SM series valve shall have independent seat and body gasket.PBM Model number SM (material)(size)9(end connection)

CS-Series 9 (1/2” through 6”): PBM’s IGENIX® Clean Steam Series 9, Same specification as SI (cast) above. Add text “Seats shall be white TFM® withFDA approved EPR O-ring energizer. Seats shall have stainless steel encapsulation on ID. Optional 300 Series s/s 4” stem extension for 4” thickinstallation. PBM Model number CS (material)(size)9(end connection)

CT-Series 8 (forged) or Series 9 (cast): PBM’s IGENIX® Clean Steam Series 8 or 9. Same specification as CS forged or cast above. Add text. ”Valve shallhave a dual chamber seat design to allow for a 1/2" Tri-Clamp® steam drain purge port positioned in the valve body to facilitate drainage of the bodycavity to the trap. Ball shall have 2 steam purge holes to allow steam condensate to flow past seats in closed position to trap. Stem packing shall be liveloaded white TFM ® and S-TEF™. Provide a 90 deg 2-position or 180deg 3-position stainless steel handle with blue vinyl grip for closed/open, and/or trapisolated valve positions. A locking handle position mechanism shall be available if required. PBM Model number CT (material)(size)8 or 9(end connection)

F & AF SERIESFI-Series 9 (1/2” through 6”): Flush tank bottom ball valve: PBM’s IGENIX® Sanitary Series 5 Flush Tank Ball Valve. “True Bore®” flush bottom tank ballvalve with port through ball, seats, weld pad, and end fitting same as ID of tubing. (Type 316 L stainless steel with less than 2% ferrite., Hastelloy C-276,Carbon Steel, Hastelloy C-22, or other). body, ball, stem, weld pad, and end fitting, three piece swing-out valve design. Seats and seals shall be whiteTFM®. Seats shall provide both upstream and downstream bubbletight seal and be adjustable for in-line wear. Stem packing shall be live loaded whiteTFM® and/or S-TEF™ material. End fitting shall match to tubing connections. Orbital weld end fittings should have wall thickness to match connectingtubing and have a controlled sulfur content of .005% through .017%. Valves shall not require disassembly for welding. Body bolts and nuts shall be 18-8stainless steel. I.D. and O.D. surface finish shall be the same as specified for tubing. Maximum working pressure to be 400 PSIG and full vacuum.PBM Model number FI(material)-(size)5(end connection)

AF Series 1: Angle stem flush tank bottom ball va l ve; Body, ball, stem, and end fitting material shall be (316 stainless steel, Hastelloy C-276, Hastelloy C-22, or other). We l dpad shall be 316L grade stainless steel (or other) material (specify). Va l ve shall be two-piece design. Seats and seals shall be VTFE material and provide both upstream andd ownstream bubbletight seal and be adjustable for inline wear. Stem packing shall be live loaded VTFE material. For manual va l ves, handle shall be 300 series stainlesssteel. Body bolts and nuts shall be 18-8 stainless steel. Maximum working pressure to be 400 psig and full vacuum. Va l ves shall be non-firesafe design unless otherwisespecified. For fire rated va l ves to API 607 Ed 4, sizes 1” – 6”, designate Series 3. To add automation and controls, see last section.

PBM Model number AF(material)-(size)1(end connection)

Written Specifications

Sanitary Valves

15

FIRE RATEDFire Rated 2-way Industrial, SI- and FI- 1/2” to 3”, AF 1” to 6”. Add text: Valve design shall be tested and comply with criteria set forth in API-607 edition4. Valve body bolts shall be fully encapsulated. Body seals shall be graphite material isolated from product stream under normal operation conditions by o-ring seals. Upon sublimation of seat and seal material in the event of a fire condition, a metal back up seat shall seal the valve at leakage rates inaccordance with API-607 Ed. 4.Model Number: Same as above, except Series “9” Changes to “6”, Series “1” changes to “3”.

D SERIESDI-Series 9, Three-way diverter port ball valve. “True Bore®” diverter port ball valve with port through ball, seats and end fitting same as ID of tubing. Type(316L stainless steel with less than 2% ferrite, hastelloy C-276 or C22, or other) body, ball, stem, and end fittings, three piece swing-out valve design. Seatsand seals shall be combined “cartridge” and be white TFM®. Seats shall provide both upstream and downstream bubbletight seal and be adjustable for in-line wear. Stem packing shall be live loaded white TFM® or S-TEF™ material. End fittings shall match to tubing connections. Orbital weld end fittingsshould have wall thickness to match connecting tubing and have a controlled sulfur content of .005% through .017%. Valves shall not require disassemblyfor welding. Body bolts and nuts shall be 18-8 stainless steel. I.D. and O.D. surface finish shall be the same as specified for tubing. Maximum workingpressure to be 400 PSIG and full vacuum. Valves shall be non-fire rated design. To add automation and controls, see section “Automation and controls”.PBM Model number DI(material)-(size)9(end connection) – (flow pattern)

M SERIESMI-Series 4: Three, four, or five way multi-port ball valve; Body, ball, stem, and end fitting material shall be (316L stainless steel, Hastelloy C-276, or other).Valve shall have 4 or 5 TFM®-PTFE Seats and seals and provide bubbletight seal and be adjustable for inline wear. Stem packing shall be live loadedTFM®-PTFE material. For manual valves, handle shall be 300 series stainless steel. Body bolts and nuts shall be 18-8 stainless steel. Maximum workingpressure to be 400 psig and full vacuum. Specify PBM flow pattern for 3,4,or 5-way valve. To add automation and controls, see section “Automation andcontrols”. PBM Model number MP(material)-(size)4(end connection)-(flow pattern)

AUTOMATION AND ACCESSORIESPBM’s Direct Mount Automated Ball Valves, Valves as specified in “Manual Valves” section with addition of a “Direct Mount” double acting or spring returnpneumatic actuator. Actuator shall be of the double opposing piston, rack and pinion design with bi-directional pinion travel stops and hard anodizedaluminum oxide body with co-deposited fluoropolymer. End caps to be polyester powder coated with 300 series stainless steel fasteners. Mounting bracketshall be stainless steel and valve stem shall insert directly into actuator drive adapter. Actuator shall be sized utilizing a 100% safety factor. Specify supplyair pressure at actuator (60 or 80 psig). PBM Model Number “PA”

PBM’s electric actuators, limit switches, positioners, solenoids, and field bus accessories. Specify according to all statutory and regulatory requirements.Include Nema rating requirements and electrical current.

RISING STEM SAMPLING VALVESS-, S2, S3 Rising Stem Sampling Valves: Body and stem shall be wrought or cast 316L stainless steel, TFM® seat and elastomer (Viton, EPR, or EPDM) o-ringseal. Handle knob shall be nylon 6/6. Bore is 1/4”, with available inlets and outlets 90 degree or in-line in sizes 1/2” through 2”. PBM Model number S- (sanitary wrought split-body), S2 (unibody cast sampling), or S3 (inline version)

SANITARY CHECK VALVESVertical installation Model CV / Horizontal installation Model H; Body and (bonnet for HV) shall be constructed of bar stock material, 316L stainless,Hastelloy C-276 or C-22, AL6XN, or others with all internal surfaces 20 Ra or better. Check valve shall use no internal springs or guides. Poppet shall beconstructed of PTFE or 316L with injection molded EPDM seat. Vertical valves (CV) shall be of split body design using sanitary clamp and USP Class VIgasket. All materials shall be FDA compliant. Elastomers shall be USP Class VI. End connections shall be specified as sanitary clamp or extended buttweldfor US gauge tubing. Extended buttweld in 316L material has 0.005 to 0.017% sulfur control. Valve body shall include marking showing direction of flow.Vertical Installation: PBM Model CV (material) (size) (end connections) (poppet material) (polish)Horizontal Installation: PBM Model HV (material) (size) (end connections) (poppet material) (polish)

Sanitary Valves

16

Igenix® Cast Series 9 or Forged Series 82-way Sanitary and Clean Steam ValvesU.S. Dimensioned valves in inches

ValveSize

Size Code I.D. Port A1 A2 B1 B2 C D E F GApprox.

Wgt (lbs)

1/2”** C 0.37 3.50 5.50 1.75 2.75 1.70 0.75 2.03 4.00 1.50 1.1

3/4”** D 0.62 4.00 6.00 2.00 3.00 1.86 0.85 2.19 4.00 1.68 1.4

1”** E 0.87 4.50 6.50 2.25 3.25 2.40 1.09 2.97 4.15 2.18 2.7

1-1/2”** G 1.37 5.50 7.50 2.75 3.75 3.89 1.68 4.91 8.81 3.31 8.9

2”** H 1.87 6.25 8.00 3.12 4.00 4.67 2.15 4.41 8.06 4.30 15

2-1/2”* J 2.37 8 . 0 0 1 1 . 0 0 4.00 5.75 6.51 2.79 6.46 12.41 5.58 36

3”** K 2.87 8.00 10.50 4.00 5.25 6.76 2.78 6.71 12.41 5.54 33

4”** L 3.84 10.00 13.00 5.00 6.50 7.53 3.66 7.48 12.41 7.33 67

6”* M 5.78 13.00 17.00 6.50 8 . 5 0 12.14 6 . 1 8 CF CF 1 2 . 3 7 164

*Cast Only Forged valves are < 1% ferrite.**Wrought Material or Cast Cast valves are < 2% ferrite.

A1B1 G

F

E

D

CC

F

E

B2A2

ISO 1127 Dimensioned valves in mm

Valve Size I.D. Tube Tube Tube A2 B2 C D E F G Approx. Size Code Port O.D. wall Series Wgt (kg)

DN 8 1 10.3 13.5 1.6 1 140 70 43.6 19.2 52 102.6 38.5 0.5

DN 10 2 14.0 17.2 1.6 1 150 75 47.7 21.8 56.2 102.6 43.1 0.6

DN 15 3 18.1 21.3 1.6 1 165 82.5 61.5 28 76 131.3 56 1.2

DN 20 4 23.7 26.9 1.6 1 190 95 100 43 126 226 85 4.0

DN 25 5 29.7 33.7 2.0 1 190 95 100 43 126 226 85 4.0

DN 32 6 38.4 42.4 2.0 1 190 95 100 43 126 226 85 4.0

DN 40 7 44.3 48.3 2.0 1 200 100 120 55 113 208 110 6.8

DIN 11850 Dimensioned valves in mm

Valve Size I.D. Tube Tube Tube A2 B2 C D E F G Approx. Size Code Port O.D. wall Series Wgt (kg)

DN 8 1 8 10 1 1 140 70 52 19.2 52 102.6 38.5 0.5

DN 10 2 10 13 1.5 2 140 70 52 19.2 52 102 38.5 0.5

DN 15 3 16 19 1.5 2 152 76 56 22 76 105 56 1.2

DN 20 4 20 23 1.5 2 165 82.5 76 28 76 105 56 1.2

DN 25 5 26 29 1.5 2 190 95 100 43 125 224 85 4.0

DN 32 6 32 35 1.5 2 190 95 100 43 125 224 85 4.0

DN 40 7 38 41 1.5 2 190 95 100 43 125 224 85 4.0

DN 50 8 50 53 1.5 2 200 100 120 55 119 205 110 6.8

Sanitary Valves

1

Igenix® Cast Series 9 or Forged Series 8 Extended Locking Lever Handle4 inch/100 mm Extended Locking Lever Handle

Locking Handle

Valve Size A B C D EUS DN ID ISO inches mm inches mm inches mm inches mm inches mm

1/2” 8, 10 8 5.1 129 6.1 154 2.5 63.5 4.9 124 0.31 7.93/4” - 10 5.1 129 7.7 197 2.5 63.5 5.0 128 0.31 7.91” 15,20 15 5.1 129 7.4 189 3.0 76 6.3 160 0.31 7.9

1-1/2” 25,32,40 20,25,32 8.0 203 9.4 240 3.8 95.5 8.2 209 0.38 9.72” 50 40 8.0 203 9.8 248 3.8 95.5 8.5 217 0.38 9.7

2-1/2” - - 12.1 306 11.4 289 3.5 89 9.8 249 0.38 9.73” - - 12.4 316 11.7 297 3.5 89 10.1 257 0.38 9.74” - - 12.4 316 12.5 316 3.5 89 10.9 276 0.38 9.7

Valve Size A B CUS DIN ISO inches mm inches mm inches mm

1/2” 8, 10 8 4.0 102 2.03 51.6 1.55 39.43/4” - 10 4.0 102 2.19 55.6 1.55 39.41” 15,20 15 5.1 130 2.97 75.4 1.64 41.7

1-1/2” 25,32,40 20,25,32 8.8 224 4.91 125 2.57 65.32” 50 40 8.1 206 4.41 112 2.57 65.3

2-1/2” - - 12.4 316 6.46 164 3.84 97.53” - - 12.4 316 6.75 172 3.84 97.54” - - 12.4 316 7.75 197 3.84 97.5

A

B

C

A

B

C

E

D

Sanitary Valves

18

Igenix® Cast Series 9 or Forged Series 8 Actuated

Valve Size ModelNumber

A B C D E FUS DIN ISO inches mm inches mm inches mm inches mm inches inches mm1/2” 8, 10 8 52SR80 5.5 139 2.8 71 4.97 126 1.61 41 1/8 NPT -0.13 -3.33/4” - 10 52SR80 5.5 139 2.8 71 4.97 126 1.61 41 1/8 NPT 0 0.01” 15,20 15 63SR80 6.4 162 3.2 81 6.02 153 1.77 45 1/8 NPT 0.13 3.3

1-1/2” 25,32,40 20,25,32 85SR80 9.4 238 4.2 106 8.52 216 2.30 58 1/8 NPT 0.36 9.12” 50 40 100SR80 10.7 272 4.8 123 9.80 249 2.68 68 1/4 NPT 0.41 10.4

2-1/2” - - 115SR80 12.9 328 5.4 137 12.66 322 2.87 73 1/4 NPT 0.57 14.53” - - 125SR80 14.4 366 5.8 148 13.50 343 3.15 80 1/4 NPT 2.01 51.14” - - 140SR80 16.9 428 6.5 164 15.1 384 3.44 87 1/4 NPT 1.6 40.06” - - 200SR80 22.6 575 8.6 218 21.8 554 4.29 109 1/4 NPT 2.00 50.8


A B C D E F

US Din ISO inches mm inches mm inches mm Inch mm inches inches mm1/2” 8, 10 8 52SR60 5.5 139 2.8 71 5.0 126 1.61 41 1/8 NPT -0.13 -3.33/4” - 10 63SR60 6.4 162 3.2 81 5.6 141 1.77 45 1/8 NPT -0.21 -5.31” 15,20 15 75SR60 8.2 207 3.7 95 6.7 169 2.07 53 1/8 NPT -0.12 -3.0

1-1/2” 25,32,40 20,25,32 100SR60 10.7 272 4.8 123 9.0 229 2.68 68 1/4 NPT .07 1.82” 50 40 115SR60 12.9 328 5.4 137 11.0 279 2.87 73 1/4 NPT .05 1.3

2-1/2” - - 125SR60 14.4 366 5.8 148 13.1 334 3.15 80 1/4 NPT 0.41 10.43” - - 160SR60 20.6 522 7.4 187 13.6 345 3.94 100 1/4 NPT 1.27 32.34” - - 160SR60 20.6 522 7.4 187 14.4 365 3.94 100 1/4 NPT 1.18 30.06” - - 200SR60 22.6 575 8.6 218 21.8 554 4.29 109 1/4 NPT 2.00 50.8

Spring Return SR Series 80 PSI/5.5 barg Supply Air, VTFE or TFM® Seats

Spring Return SR Series 60 psig/4.1 barg Supply Air, VTFE or TFM® Seats

AB

E

D

C

E

Sanitary Valves

19


A B C D E F

US Din ISO inches mm inches mm inches mm inches mm inches inches mm

1/2” 8, 10 8 52DA80 5.5 139 2.8 71 5.0 126 1.61 41 1/8 NPT -0.13 -3.3

3/4” - 10 52DA80 5.5 139 2.8 71 5.1 130 1.61 41 1/8 NPT 0 0.0

1” 15,20 15 52DA80 5.5 139 2.8 71 5.6 142 1.61 41 1/8 NPT 0.34 8.6

1-1/2” 25,32,40 20,25,32 75DA80 8.15 207 3.7 95 8.1 205 2.1 53 1/8 NPT 0.58 14.7

2” 50 40 75DA80 8.15 207 3.7 95 8.8 225 2.1 53 1/8 NPT 0.92 23.4

3” - - 115DA80 12.9 328 5.4 137 13.0 330 2.9 73 1/4 NPT 2.17 55.1

4” - - 115DA80 12.9 328 5.4 137 13.8 349 2.9 73 1/4 NPT 2.08 52.8

6” - - 200DA80 22.6 575 8.6 218 21.8 554 4.3 109 1/4 NPT 2.00 50.8


A B C D E FUS Din ISO inches mm inches mm inches mm inches mm inches inches mm1/2” 8, 10 8 52DA60 5.5 139 2.8 71 5.0 126 1.61 41 1/8 NPT -0.13 -3.33/4” - 10 52DA60 5.5 139 2.8 71 5.1 130 1.61 41 1/8 NPT 0 0.01” 15,20 15 52DA60 5.5 139 2.8 71 5.6 142 1.61 41 1/8 NPT 0.34 8.6

1-1/2” 25,32,40 20,25,32 75DA60 8.15 207 3.7 95 8.1 205 2.1 53 1/8 NPT 0.58 14.72” 50 40 75DA60 8.15 207 3.7 95 8.8 225 2.1 53 1/8 NPT 0.92 23.4

3” - - 115DA60 12.9 328 5.4 137 13.0 330 2.9 73 1/4 NPT 2.17 55.1

4” - - 115DA60 12.9 328 5.4 137 13.8 349 2.9 73 1/4 NPT 2.08 52.86” - - 200DA60 22.6 575 8.6 218 21.8 554 4.3 109 1/4 NPT 2.00 50.8

Double Acting DA Series 80 psig/5.5 barg Supply Air, VTFE or TFM® Seats

Double Acting DA Series 60 psig/4.1 barg Supply Air, VTFE or TFM® Seats

AB

F

E

D

See Page 20 for “H” and “I”.

E

C

I

Sanitary Valves

20

Igenix® Flush Tank Cast Series 9 or Forged Series 8ValveSize

SizeCode Units I.D.

Port A B C D E F G H I Approx.Weight

1/2”**

DN 15C

inches 0.37 2.81 1.75 1.70 0.75 2.03 4.00 1.50 .30 2.75 1.6 lbs.mm 9.4 71.4 44.5 43.2 19.1 51.6 102 38.1 7.6 69.9 .73 kg.

3/4”**

DN 20D

inches 0.62 3.19 2.00 1.86 0.85 2.19 4.00 1.68 .30 3.00 2 lbs.mm 15.8 81.0 50.8 47.2 21.6 55.6 102 42.7 7.6 76.2 .91 kg.

1”**

DN 25E

inches 0.87 3.78 2.25 2.40 1.09 2.97 5.12 2.18 .42 3.75 3.6 lbs.mm 22.1 96.0 57.2 61.0 27.7 75.4 130 55.4 10.7 95.3 1.63 kg.

1-1/2”**

DN 40G

inches 1.37 4.98 2.75 3.89 1.68 4.91 8.81 3.31 .62 5.50 12 lbs.mm 34.8 127 70 99 43 125 224 84 15.7 140 5.44 kg.

2”**

DN 50H

inches 1.87 5.69 3.12 4.67 2.15 4.41 8.12 4.30 .81 6.50 22 lbs.mm 47.5 145 79 119 55 112 206 109 21 165 9.88 k g .

3”**

DN 80K

inches 2.87 9.19 4.50 6.84 2.94 6.75 12.0 5.82 .75 9.00 58 lbs.mm 72.9 233 114 174 75 172 305 148 19.1 229 26.31 kg.

4”**DN 100

Linches 3.84 9.6 5.0 7.6 4.23 7.75 12.0 8.46 .98 11.5 94 lbs.mm 98 244 127 193 107 197 305 215 25 292 42.64 kg.

6”*DN 150

Minches 5.78 12.8 6.50 12.14 6.18 N/A N/A 12.36 1.32 17.0 164 lbs.mm 147 325 165 308 157 N/A N/A 314 34 432 74.39 kg.

*Cast Only**Wrought Material or Cast

A

B

C

F

E

D

H

I

G

Sanitary Valves

21

ValveSize

SizeCode Units I.D.

Port Ends A B C D E F G H Approx.Weight

1/2”**

DN 15 Cinches 0.37 Clamp 3.5 1.75 1.75 1.75 0.75 2.0 4.0 1.5 1.6 lbs.

mm 9.40 Clamp 89 45 45 43 19 52 102 38 0.73 kg.

3/4”**

DN 20 Dinches 0.62 Clamp 4.0 2.0 2.0 1.86 0.85 2.2 4.0 1.68 2 lbs.

mm 15.75 Clamp 102 51 51 47 22 56 102 43 0.91 k g .

1”**

DN 25 Einches 0.87 Clamp 4.5 2.3 2.3 2.4 1.09 3.0 5.1 2.2 3.6 lbs.

mm 22.10 Clamp 114 57 57 61 28 75 130 55 1.63 k g .

1-1/2”**

DN 40 Ginches 1.37 Clamp 5.5 2.8 2.8 3.9 1.68 4.9 8.8 3.3 12 lbs.mm 34.04 Clamp 140 70 70 99 43 125 224 84 5.44 k g .

2”**

DN 50 Hinches 1.87 Clamp 6.3 3.1 3.1 4.7 2.2 4.4 8.1 4.3 22 lbs.mm 47.50 Clamp 159 79 79 119 55 112 206 109 9.98 k g .

3”**

DN 80 Kinches 2.87 Clamp 8.0 4.0 4.0 6.8 2.8 6.8 12.4 5.5 33 lbs.mm 72.90 Clamp 2 0 3 102 102 172 70 172 315 141 14.97 k g .

4”**

DN 100 Linches 3.83 Clamp 10.0 5.0 5.0 7.5 3.7 7.5 12.4 7.3 67 lbs.mm 97.28 Clamp 2 5 4 1 2 7 1 2 7 191 93 191 315 186 30.39 k g .

6”*DN 150 M

inches 5.78 Clamp 13.0 6.5 6.5 12.1 6.2 N/A N/A 12.4 177 lbs.mm 146.81 Clamp 3 3 0 165 165 308 1 5 7 N/A N/A 314 80.29 k g .

Igenix® Diverter Port Cast Series 9 or Forged Series 8

*Cast Only**Wrought Material or Cast

A

B

G

F

E

D

H

C

Sanitary Valves

22

Sanitary Valves

n 1/2” through 3” sizes, 3 piece, 2-wayn Passed API-607 Ed. 4 testingn 316L stainless (ASTM A351 CF3M), Hastelloy C276

and other ASME B16.34 listed materials.

PBM’s Sanitary Fire Rated design valvesaccommodate flammable media insanitary process environments.

Sanitary Fire-Rated Series 6 valves

Manual Ball Valves with Spring ReturnHandle and Optional Fusible LinkPBM’s Igenix® Sanitary Series 6 Manual Valves can bemodified with a bracket-mounted Spring ReturnHandle unit. The Spring Return Handle unit can beequipped with an optional fusible link specified to acustomer’s required melt temperature, which closesthe valve during fire conditions.

Features:

ValveSize

SI SeriesPart # Units Ball

I.D.Tubing

Ga.A1

ClampA

Weld B1 B C D E F G Approx.Weight

1/4”DN 8 SI--A6F---

inches .3720 ga.

5.5 2.75 1.84 .92 2.63 4.15 1.5 1.5 lbs.mm 9.4 140 70 47 23 67 105 38 .7 kg.

3/8”DN 10 SI--B6F---

inches .3720 ga.

5.5 2.75 1.84 .92 2.63 4.15 1.5 1.5 lbs.mm 9.4 140 70 47 23 67 105 38 .7 kg.

1/2”DN 15

SI--C6F---inches .37

16 ga.3.50 5.5 1.75 2.75 1.84 .92 2.63 4.15 1.5 1.6 lbs.

mm 9.4 88.9 140 44.5 70 47 23 67 105 38 .7 kg.3/4”

DN 20 SI--D6F---inches .62

16 ga.4 .0 5.5 2.0 2.8 2.0 1.0 2.8 4.2 1.5 2 lbs.

mm 15.7 1 0 2 1 4 0 51 69.9 51 25 71 105 38 .9 kg.

1”DN 25

SI--E6F---inches .87

16 ga.5.4 6.0 2.7 3.0 2.7 1.3 3.0 5.1 1.5 4.5 lbs.

mm 22.1 136 152 68 76 68 33.8 77.0 1 2 9 38 2.0 kg.1-1/2”DN 40 SI--G6F---

inches 1.3716 ga.

5 . 5 0 7.5 2.75 3.75 3.56 1.78 4.10 8.68 1.5 10 lbs.mm 34.8 140 191 70 95 90 45 104 221 38 4.5 kg.

2”DN 50 SI-H6F----

inches 1.8716 ga.

6 . 2 5 8.0 3.12 4.0 4.3 2.15 4.41 8.68 1.75 15.3 lbs.mm 47.5 1 5 9 203 79 102 109 55 112 2 2 1 45 6.9 kg.

2-1/2”DN 65

SI--J6F---inches 2.37

16 ga.8.0 11.5 4 . 0 0 5.75 5.58 2.79 6.45 12.4 2.31 36 lbs.

mm 60.2 2 0 3 292 1 0 2 146 142 71 1 6 4 3 1 6 59 16.3 kg.3”

DN 80 SI--K6F---inches 2.87

16 ga.9.0 13.5 4.5 6.75 6.28 3.14 6.78 12.4 2.31 49 lbs.

mm 72.9 229 343 114 172 160 80 172 316 59 22.2 kg.

AB C

Tri-ClampTM

Connection

E

D

A1

ExtendedButtweldConnection

Sanitary Valves

2

Fire Rated Valves

Automated Series 6 Valves with Direct Mount Actuation

Valve SizeSI, FI

Valve NumberUnits

DOUBLE ACTING, TFM® or VTFE SEATS*80 psig / 5.5 barg Supply Air 60 psig / 4.1 barg Supply Air

A B C D E A B C D E1/2”

DN15 * * --C6#---inches 5.5 2.8 5.4 1.61 1/8 5.5 2.8 5.4 1.61 1/8mm 139 71 136 41 139 71 136 41

3/4”DN 20 * * --D6#---

inches 5.5 2 . 8 5.5 1.61 1/8 5.5 2 . 8 5.5 1.61 1/8mm 139 71 140 41 139 71 140 41

1”DN 25 * * --E6#---

inches 5.5 2.8 6.2 1.6 1/8 5.5 2.8 6.2 1.61 1/8mm 139 71 157 41 139 71 157 41

1-1/2”DN 40 * * --G6#---

inches 6.4 3.2 7.9 1 .8 1/8 8.2 3.7 8.6 2.1 1/8mm 162 81 201 45 207 94.5 217 52.6

2”DN 50 * * --H6#---

inches 8.2 3.7 8.9 2.1 1/8 8.2 3.7 8.9 2.1 1/8mm 207 95 225 53 207 95 225 52.6

2-1/2”DN 65 * * --J6#---

inches 12.9 5.4 12.7 2.9 1/4 12.9 5.4 12.7 2.9 1/4mm 328 137 322 73 328 137 322 73

3”DN 80 * * --K6#---

inches 12.9 5.39 13 2.87 1/4 12.9 5.4 13 2.9 1/4mm 328 137 330 73 328 137 330 73

Valve SizeSI, FI

Valve NumberUnits

SPRING RETURN, TFM® or VTFE SEATS*80 psig / 5.5 barg Supply Air 60 psig / 4.1 barg Supply Air

A B C D E A B C D E1/2”

DN 15* * --C6#---

inches 5.5 2.8 5.4 1.61 1/8 6.4 3.2 5.8 1.77 1/8mm 139 71 136 41 162 81 147 45

3/4”DN 20

* * --D6#---inches 6.4 3 . 2 6.0 1.77 1/8 6.38 3 . 1 7 5.95 1.8 1/8mm 162 8 1 151 45 162 8 1 151 45

1”DN 25

* * --E6#---inches 8.15 3.72 7.25 2.1 1/8 8.15 3.72 7.25 2.1 1/8mm 207 95 184 53 207 95 184 53

1-1/2”DN 40

* * --G6#---inches 10.7 4.8 9.5 2.7 1/4 9.4 4.8 9.5 2.7 1/4mm 272 123 242 68 238 123 242 68

2”DN 50

* * --H6#---inches 10.7 4.8 9.8 2.7 1/4 12.9 5.4 11.0 2.9 1/4mm 272 123 249 68 328 137 279 73

2-1/2”DN 65

* * --J6#---inches 12.9 5.4 12.7 2.8 1/4 14.4 5.8 13.1 3.2 1/4mm 328 137 322 73 366 148 334 80

3”DN 80 * * --K6#---

inches 14.4 5.8 13.5 3.2 1/4 1 6 . 9 6.5 14.4 3.4 1/4mm 366 148 342 80 428 164 366 87

*Consult factory for other seat materials.** True Bore Valve Series SI, FI# End Connection type (See How to Order Codes)* * Operator Code (See How to Order Codes)

AB

C

EE E

D

Sanitary Valves

24

B C D G H

Size Units Port

Face-to-Face

CL to End

CL to Bottom Pad DiameterX-Clamp

X-Clamp

1”DN 25

inches 1 . 0 0 3.9 2.2 1.7 3.7mm 2 5 . 4 99.1 55.9 43.2 94.0

1-1/2”DN 40

inches 1 . 5 0 4.7 2.4 1.7 5.5mm 3 8 . 1 119.4 61.0 43.2 139.7

2”DN 50

inches 1 . 9 4 5.5 2.9 2.0 7.0mm 4 9 . 3 139.7 73.7 50.8 177.8

3”DN 80

inches 2.75 7.9 3.8 3.9 10 . 0mm 69.9 20 0.7 96.5 99.1 254.0

4”DN 100

inches 3.50 8.9 4.7 4.5 11.5mm 88.9 226.1 119.4 114.3 2 9 2 . 1

6”DN 150

inches 5.24 1 4 . 6 9.0 6.3 15.0mm 133.1 3 7 0 . 8 228.6 1 60 . 0 381.0

AF-Series 1

1” & 1-1/2” = 10˚2”, 3”, 4”, & 6” = 15˚

Tri-ClampTM

End Connection

B

C

H

I D

B

< degrees

Fire test qualified through 6”.

Sanitary Valves

25

AF-Series 1 ActuatedA B C D E I

Size PortActuator

TypeAir Supplypsig/barg Units

Actuatorlength

Actuatorwidth

Pad Faceto actuator

CLto actuator NPT

Padthickness

1"DN 25

1.00”25.4 mm

Double Acting80 inches 5.5 2.8 1.12 6.2 1/8 .545.5 mm 139 7 1 28. 158 13.7

Double Acting60 inches 6.4 3.2 0.9 6.7 1/8 .544 . 1 m m 162 80.5 23.6 169 13.7

Spring Return80 inches 8.2 3.7 0.73 7.3 1/8 .545.5 mm 207 94.5 18.5 186 13.7

Spring Return60 inches 9.4 4.2 0.55 7.8 1/8 .544 . 1 mm 238 106 14 197 13.7

1-1/2"DN 40

1.50”38.1mm

Double Acting60, 80 inches 8.2 3.7 1.6 8.4 1/8 .814.1, 5.5 m m 207 95 39 212 20.6

Spring Return80 inches 10.7 4.8 1.1 9.3 1/4 .815.5 mm 272 123 28 237 20.6


2"DN 50

2.00”49.3 mm


Spring Return80 inches 10.7 4.8 2.1 9.5 1/4 .685.5 mm 272 123 53 240 17.3


3"DN 80

2.75”69.9 mm

Double Acting60, 80 inches 12.9 5.4 3.9 13.1 1/4 .7941, 5.5 m m 328 137 100 334 20.1

Spring Return80 inches 14.4 5.8 3.8 13.6 1/4 .795.5 mm 366 148 98 345 2 0 . 1


4"DN 100

3.50”88.9 mm


Spring Return60, 80 inches 16.9 6.5 4.1 14.9 1/4 .914.1, 5.5 mm 428 164 104 379 23.1

6"DN 150

5.25”133.4 mm

Double Acting80 inches 20.6 7.4 5.9 18.9 1/4 .795.5 mm 522 187 150 481 20.1

Double Acting60 inches 16.9 6.5 6.3 18.5 1/4 .794 . 1 mm 428 164 160 469 20.1

Spring Return80 inches 22.6 8.6 4.6 20.9 1/4 .795.5 m m 575 218 117 530 20.1


AB

GH

E

DC

I

Sanitary Valves

26

M-Series 4B C 1 D 1 C 2 D 2 E F G 1 G 2 H

Va l veS i z e

S i z eC o d e

U n i t s

Tr u eB o rePo r t

D i a m

Face to Fa c e CL to Fa c e Face to Fa c e CL to Fa c e H a n d l eL e n g t hf ro m

CL

CL t oTop ofH a n d l e

CL t oB o t t o m

S i d eE n t

CL t oB o t t o mB o t t o mE n t ry

B u t tWe l dE x t .F -

A p p roxWe i g h t

S / SX - F - X - F - X - F - X - F -

1 / 2 "DN 15

Ci n ch e s . 3 7 5 . 3 8 . 3 2 . 6 4 . 1 4 . 9 6 . 4 2 . 6 4 . 1 6 . 1 2 . 8 1 . 5 2 . 4 1 . 3 8 lbs.

m m 9 . 4 1 3 5 2 1 1 6 6 1 0 4 1 2 5 1 6 3 6 6 1 0 4 1 5 5 7 1 3 8 6 1 3 3 3.6 kg.

3 / 4 "DN 20

Di n ch e s . 6 2 5 . 3 8 . 3 2 . 6 4 . 1 4 . 9 6 . 4 2 . 6 4 . 1 6 . 1 2 . 8 1 . 5 2 . 4 1 . 3 8 lbs.

m m 1 6 1 3 5 2 1 1 6 6 1 0 4 1 2 5 1 6 3 6 6 1 0 4 1 5 5 7 1 3 8 6 1 3 3 3.6 kg.

1 "DN 25

Ei n ch e s . 8 7 7 . 4 7 . 4 3 . 7 3 . 7 5 . 7 5 . 7 3 . 7 3 . 7 8 . 1 5 . 0 1 . 6 2 . 3 1 . 3 12 lbs.

m m 2 2 1 8 8 1 8 8 9 4 9 4 1 4 5 1 4 5 9 4 9 4 2 0 6 1 2 7 4 1 5 8 3 3 5.4 kg.

1 - 1 / 2 "DN 40

Gi n ch e s 1 . 3 7 8 . 5 1 0 . 0 4 . 3 5 . 0 7 . 6 8 . 3 4 . 3 5 . 0 1 2 . 1 5 . 3 2 . 3 3 . 3 1 . 3 30 lbs.

m m 3 5 2 1 6 2 5 4 1 0 9 1 2 7 1 9 3 2 1 1 1 0 9 1 2 7 3 0 7 1 3 5 5 8 8 4 3 3 13.6 kg.

2 "DN 50

Hi n ch e s 1 . 9 1 0 . 1 1 3 . 1 5 . 1 6 . 6 8 . 8 1 0 . 3 5 . 1 6 . 6 1 2 . 1 5 . 8 2 . 6 3 . 9 1 . 3 45 lbs.

m m 4 8 2 5 7 3 3 3 1 3 0 1 6 8 2 2 4 2 6 2 1 3 0 1 6 8 3 0 7 1 4 7 6 6 9 9 3 3 20.4 kg.

3 "DN 80

Ki n ch e s 2 . 9 1 3 . 2 1 6 . 2 6 . 6 8 . 1 1 2 . 2 1 3 . 8 6 . 6 8 . 1 C F6 C F6 4 . 1 5 . 5 1 . 3 69 lbs.

m m 7 3 3 3 5 4 1 2 1 6 8 2 0 6 3 1 0 3 5 1 1 6 8 2 0 6 C F6 C F6 1 0 4 1 4 0 3 3 31.3 kg.

4 "DN 100

Li n ch e s 3 . 8 1 6 . 2 1 9 . 1 8 . 1 9 . 6 1 5 . 0 1 6 . 5 8 . 1 9 . 6 C F6 C F6 5 . 6 C F 2 . 3 156 lbs.

m m 9 7 4 1 2 4 8 5 2 0 6 2 4 4 3 8 1 4 1 9 2 0 6 2 4 4 C F6 C F6 1 4 2 C F 5 8 71 kg.

6 "DN 150

Mi n ch e s 5.8 19.0 C F 9 . 5 C F 1 6 . 8 C F 9 . 5 C F C F6 C F6 6 . 8 C F C F 385 lbs.

m m 1 4 7 483 C F 2 4 1 C F 4 2 7 C F 2 4 1 C F C F6 C F6 1 7 3 C F C F 175 kg.

NOT E S:1 . M a ny other end fittings are also available, consult factory.2 . Using a welded connection for more than one end fitting on a MI Series va l ve may complicate maintenance. Provisions must be made to allow removal of end fittings

and body from line.3 . Top entry access, 1/2" – 4" sizes. Side entry access, 6" size.4 . C avity fillers in 1/2" – 4" sizes are installed from the top. Cavity fillers in 6" size are installed from the sides.5 . F- dimensions are in accordance with ASTM A - 2 6 9 .6 . A gear operator is recommended for 3", 4", and 6" va l ves. Consult PBM.7 . Double angle port is not True-Bore design.8 . D rawings are for illustration purposes only. Consult PBM prior to any fabrication or installation wo r k .

PHONE: (412) 863-0550FAX: (412) 864-9255FORMERLY PITTSBURGH BRASS MFG. CO.

SK-94161B

H

EXTENDED BUTT WELD(BWTE)

E

C1

D1D2

C2

TRI-CLAMP (TT)

B

G2

G1

F

B

G2Extended Buttweld

F-

E

D2D1

F

G1

H

C2C1

Tri -ClampX-

Sanitary Valves

27

VTFE OR TFM® SEAT MATERIAL

Size Actuator TypeAir Supply A B C D E

psig/barg inches mm inches mm inches mm inches mm inch

1/2"DN 15

Double Acting 80/5.5 5.5 139 2.8 71 6.7 171 1.61 41 1/8Double Acting 60/4.1 6.4 162 3.2 81 7.2 182 1.77 45 1/8Spring Return 80/5.5 8.2 207 3.7 95 7.8 199 2.1 53 1/8Spring Return 60/4.1 9.4 238 4.2 106 8.3 210 2.3 58 1/8

3/4"DN 20


1"DN 25

Double Acting 60/4.1, 80/5.5 8.2 207 3.7 95 8.7 220 2.1 53 1/8Spring Return 80/5.5 10.7 272 4.8 123 9.6 244 2.7 68 1/4Spring Return 60/4.1 12.9 328 5.4 137 10.8 274 2.9 73 1/4

1-1/4"DN 32

Double Acting 60, 80/5.5 8.2 207 3.7 95 8.7 220 2.1 53 1/8Spring Return 80/5.5 10.7 272 4.8 123 9.6 244 2.7 68 1/4Spring Return 60/4.1 12.9 328 5.4 137 10.8 274 2.9 73 1/4

1-1/2"DN 40


2"DN 50


3"DN 80


4"DN 100


M-Series 4 Actuated

A

B

E E

D

C

Sanitary Valves

28

Rising Stem Sampling Valvesn Cleanable and maintainablen Reliable — Simple design, easy to maintainn Clean — 3A Rated

f e a t u r e s• 316L Stainless ASTM A351CF3M or

A479S31603

• All materials are 3A and FDA compliant

• Swickle outlet

• Autoclavable

• Torchable for sterilization

• Large nylon 6/6 handle knob

• Replaceable EPDM O-ring, TFMTM seat

• 3/8” straight thread, 1/4” MNPT, andsanitary clamp inlet connections

• 316L stainless bar material

• All materials are 3A FDA compliant

• 1/2-inch clamp inlet, 1/4-inch hose barb outlet

• Autoclavable

• Large nylon 6/6 handle knob

• Replaceable viton o-ring and TFMTM seat

Ideal for use as a vent/drain valve onsanitary filter housings.n Economical n Clean: 3A Rated with n Fast Delivery clamp or welded inlet n Reliable connected and viton

o-ring

Sanitary FilterHousing

PBM InlineSampling Valve(Filter Drain)

PBM Inline SamplingValve (Filter Vent)

f e a t u r e s

-Sanitary Valves

2

Rising Stem Sampling ValvesActuated Valves

The actuator is single acting, pneumaticand is spring return to the closed valveposition and operates with 50 to 120 psigair pressure. A 1/4-inch FNPT tap isprovided for connecting the air linefrom the solenoid valve. It features anadjustment to set full open flow to thedesired level. This flow can be adjustedfrom a trickle flow to as much as 5 gpm at25 psi pressure drop. A knob isprovided to operate the valve manuallyin lieu of operating the valve with air.

Position of the valve can be detected withone or two IFM Efector MK 5005proximity switches that sense theposition of a magnet above the piston inthe valve. These low current switchesoperate at voltages of 10 to 30 VDC.

1 + 2 3 + 4 5 6 7 8 9 10 11 12 15

Product Material Inlet Inlet Outlet Outlet Seat & Purge Quantity Purge Type Actuation PolishSize Type Size Type Seal Code & Type & Size

S- HL C X A H A - - - A

S-HLCXAHA - - A is the code for a Sampling Valve (1/4-inch diameter inlet hole), 316L grade stainless steel, with a 1/2-inchSanitary Clamp inlet and a 1/4-inch hose barb outlet, TFM® seat and Viton O-ring and body seal, with 20 Ra ID mechanical polish.

Ordering Example

Sample process media quickly and easily with PBM’sSampling Valve. Special pad design minimizes deadspace. Easy CIP with Purge Ports and Milled Ball Flatsensures reliable samples. Valve can be shipped pre-mounted to piping for easy installation. Ideal for heavyduty and sanitary applications. Manual valve standard.

S i z e s :• 1/2" - 2"

M a t e r i a l s :• 316 &

316L S/S• H a s t e l l oy• Ti t a n i u m• O t h e r s

O p t i o n s :• A c t u a t i o n• S t e a m• Po l i s h i n g

Product Code Materials Inlet Size* Inlet Type Outlet Size Outlet Type Seat/Seal Code PurgeQty/Location

Purge Type/Size Actuation Polish Options

S-Samplingw/1/4” diam.inlet hole

HL CF3M A 1/4” X Tri-ClampTM A 1/4” X Tri-ClampTM A TFM® Viton - NoneA 1/4”

Hose Barb

- None - 32 Ra ID

H9

A479,531603(wrought

316L)

B 3/8” P Male NPT B 3/8” P Male NPT B TFM® EPDM A One A Actuator A 20 Ra ID after EP

S2

Unibodyshort versionw/1/4” diam.inlet hole

C 1/2” F Butt Weld C 1/2” F Butt Weld D TFM® KalrezB 1/2”

Tri-ClampTM

B 15 Ra ID after EP

D 3/4”G Straight

Thread

D 3/4” H Hose Barb C 10 Ra ID after EP

E 1”E

1” & 1-1/2”

(clamp only)

S Swickle C 1/4” FNPTD 20 Ra ID & 32 Ra

OD after EP

S3

Inline version w/1/4"diam.inlet hole

G 1-1/2” D 1/8” FNPT

H 2” E 1/2” Tubing F 20 Ra ID after EP

H 10 Ra ID after EP

Ordering Information

* Note: Bore diameter is 0.25”.

Sanitary Valves

30

Igenix® Trap Valve

Service Position Open Position Trap Position

steam

steam trap

Trap can be removed for service Clean steam to point of use

steam trap

90°

steam trap

180°

Condensate draining through trap

The Closed or Service Positionallows steam trap maintenanceby turning the ball 180˚ counter-clockwise from the normal“Closed” position to the “TrapIsolated” position. As the ball isclosed toward the steam-in port, it isolates the steam trap.Maintenance can then beperformed on the steam trap. Toreturn the trap to service, theball is turned 180˚ clockwise tothe “Trap” position.

The Open Position allows theflow of steam. Appropriatesampling piping or equipmentconnections are made at thepoint-of-use port, and the ballis turned 90˚ counterclockwise,opening the valve. The trap isisolated from flow allowing fullsterilization temperature to bequickly reached. The valve isthen turned 90˚ clockwise toreturn the steam trap to servicein the “Trap” position.

The Trap Isolated Positionallows condensate to flow pastthe ball purge holes duringnormal operation, bypassingthe upstream seat. Condensateflows past the purge holes inthe ball and out the side portof the valve to the steam trap,allowing the body cavity toremain hot. The point-of-use,or sampling connection, isisolated by the surface of theball without the purge holespressing against thedownstream seat.

Clean Steam Trap Ball Valves

Sanitary Valves

3

Trap Valves cont.

Benefits:• Significantly reduces deadleg piping where condensate can cool and

become contaminated.• Permits sampling of steam for purity.• Safely isolates trap for ease of maintenance.• Reduced valve and piping costs

Integral Trap Valves

2 - way sanitary Steam Trap va l ves use body purgeport and ball purge holes to direct flow to the tra pwhile shutting off flow dow n s t ream. Pe r m i t ssampling of steam for purity and safely isolates tra pfor ease of maintenance.

Deadleg piping is reduced wh e re condensate cancool and cause contamination. These va l ve sperform three functions and also reduce costs byeliminating unnecessary welds, “T”s and piping.

S i z e s :• 1/2" - 2"

M a t e r i a l s :• 316L S/S• H a s t e l l oy C276 & C-22• Ti t a n i u m• O t h e r s

O p t i o n s :• A c t u a t i o n• Po l i s h i n g• Vertical or

horizontal installation

Clean SteamTrap Connnection

Sanitary Valves

32

Self-Cleaning Ball Valves

Unlike traditional ball valves, PBM’s self-cleaning valve withAdjust-O-SealTM thoroughly cleans valve internals during CIP inthe full open position. PBM’s self-cleaning ball valve alsoprovides full, unobstructed flow and bidirectional, bubbletight shutoff. These are significant advantages over floatingball designs, as well as diaphragm and butterfly valves.

Pr o b l e m

Cleaning va l ves and piping systemsis critical in sanitary applications. Ifva l ves are not thoro u g h ly cleaned,p roduct is trapped in the va l vec avity that can contaminate the nex tb a t ch of pro d u c t .

S o l u t i o n

P B M ’s self-cleaning ball va l ve design allow sfull CIP/SIP access to all va l ve internals in thefull open position. This allows first the pro c e s sand then the cleaning solution and rinse solutionto flow fre e ly throughout the body cavity wh e nthe va l ve is in the open position.

B e n e f i t s

u Unique design facilitates cleaning of the body cav i t y.

u Eliminates downtime and maintenance costs associated with re m oving va l ves for cleaning.

u Adjustable seats (Adjust O-SealT M) a l l ows va l ve to retain bidirectional seating.

u P rovides full unobstructed flow. Flow of a 1” PBM va l ve is comparable to a 2” diaphragm valve.

Sanitary Valves

33

Spray Ball Valves

A p p l i c a t i o n sThorough cleaning of the inside of tanks, mixers, and other vessels is critical in many applications. PBM designed theAngle Stem Spray Ball Valve to solve an automotive paint customer’s problem. In this application, the vessel had beenrinsed from the top by a rotating nozzle, spraying a cleaning fluid that drained to the bottom of the vessel. However, thebottom of the agitator did not become clean. Now, when PBM Angle Stem Spray Ball Valve assemblies are placed on eachside of the tank to spray underneath the agitator, the bottom of the agitator can be cleaned at the same time the vessel isbeing cleaned.

B e n e f i t sn Spray nozzle is not exposed to the inside of the

vessel. This minimizes the potential for clogging ordamage caused either by the process or byscraping the inside tank walls during cleaning or processing.

n Valve mounts flush with the inside vessel wall, minimizing dead space.

n Valve can be located anywhere on the vessel to accommodate specific needs.

n Many standard nozzles can be used in the Angle Stem Spray Ball Valve.

n Angle Stem Spray Ball Valve allows actuator clearance on jacketed or insulated tanks.

n Easily used while still maintaining a vacuum.

For cleaning inside tanks and other ve s s e l s

Sampling Va l ve s

Sample process media quickly and easily with PBM’sSampling Valve. Special pad design minimizes deadspace. Easy CIP with Purge Ports and Milled Ball Flatsensures reliable samples. Valve can be shipped pre-mounted to piping for easy installation. Ideal forheavy duty and sanitary applications. Manual valve standard.

S i z e s :• 1/2" - 2"

M a t e r i a l s :• 316 &

316L S/S• H a s t e l l oy• Ti t a n i u m• O t h e r s

O p t i o n s :• A c t u a t i o n• S t e a m• Po l i s h i n g• Sample Cup Ball

Sanitary Valves Fabflex® Manifolds Fabflex Manifolds are space-saving pipe and valveconfigurations designed to accommodate special industrialand sanitary applications. Can be shipped in lengths up to 18’,with multiple manual and automated valves pre-installed.100% testing before shipment ensures proper performance.Minimal dead space reduces areas where media could becometrapped. Blank valve pads can be provided to accommodatefuture process expansion.

Va l ve Sizes:• 1/4" - 6"

M a t e r i a l s :• 316 & 316L S/S• Carbon Steel• H a s t e l l oy

O p t i o n s :• Fi re - Te s t• C I P / S I P• C avity Fi l l e r s• A c t u a t i o n• S t e a m• Polishing & E l e c t ro p o l i s h i n g

34

Sanitary Valves

35

Use PBM’s 2-Way Control Valves in industrial andsanitary throttling or shearing applications to accuratelycontrol the flow of liquids or thick media. These valvesfeature characterized balls with various port shapes,including "V." Manual valve standard.

S i z e s :• 1/2" - 6"

M a t e r i a l s :• 316 & 316L S/S• H a s t e l l oy• O t h e r s

O p t i o n s :• A c t u a t i o n• 30°, 45°, 60° V A n g l e s• S l o t t e d• L o cking Handle• Polishing & E l e c t ro p o l i s h i n g

n True-bore® port diameter is same as matingpipe or tube.

n Cavity-Free design eliminates pockets, voids, or puddles in the valve.

n Available in sizes 1/2” through 4”n Standard turn radius of 1.5 D can be

modified as necessary for specific pig designs.

n 120-degree 3-way “Y” port permits easy passage of line pigs.

n O-ring energized seats ensure leak-free operation.

n Available with manual handle, gearoperator, pneumatic, or electric automation.

n Standard material of construction is 316/316L stainless steel.

n Multiple end connections available, including flanged, sanitary clamp, camlock,female NPT, and weld.

n Each valve is custom engineered to meet specific design and application requirements.

Control Valves

3-WayPiggingValves

Sanitary Valves

36

Automation and Controls

Die cast aluminu mend cap s, p o lyester p owder coat e d

N e s t e dspring sets

A s s e m bly screwStainless Steel

Piston guidePistons made from die cast aluminu m

S e a l sNBR Standard

B o dy manu fa c t u red from ex t ruded aluminum UNI 6060,H a rd coat anodize d

N i cke l - p l at e dSteel pinion( bl owout pro o f )

S t a n d a rdVi s u a lPo s i t i o nI n d i c at o r

Piston guide

Actuator Model

Air Pressure at Actuator ApproximateWeight

60 psig 4.1 barg 80 psig 5.5 bargConstant Torque Output

in-lbs. N-m in-lbs. N-m lbs. kg.PAVBL453D--0052 133 1 5 179 20 2.3 1.0PAVBL453D--0063 238 27 321 36 3.3 1.5PAVBL453D--0075 435 49 586 66 5.5 2.5PAVBL453D--0085 629 71 851 96 7 3PAVBL453D--0100 991 112 1,336 151 11 5PAVBL453D--0115 1,640 185 2,210 250 18 8PAVBL453D--0125 2,157 244 2,906 328 22 10PAVBL453D--0140 3,013 340 4,018 454 34 15PAVBL453D--0160 4,394 497 5,859 662 43 20PAVBL453D--0200 8,239 931 10,981 1,241 71 32PAVBL453D--0270 19,097 2,158 25,469 2,878 154 70

Actuator ModelSpring

Set

Spring TorqueOutput

Air Pressure at ActuatorApproximate

Weight 60 psig/4.1 barg 80 psig/5.5 barg

Torque Output from PressureStart Start End End Start Start End End Start Start End End

in-lbs. N-m in-lbs. N-m in-lbs. N-m in-lbs. N-m in-lbs. N-m in-lbs. N-m lbs. kg.PAVBL253S- -0052 03 66 7.5 38 4.3 80 9.0 47 5.3 N/A N/A N/A N/A 2.7 1.2PAVBL453S- -0052 05 88 10 60 7 N/A N/A N/A N/A 101 11.4 55 6 2.7 1.2PAVBL253S- -0063 03 128 15 71 8 149 17 79 9 N/A N/A N/A N/A 4.0 2PAVBL453S- -0063 05 196 22 111 13 N/A N/A N/A N/A 193 22 95 11 4.0 2PAVBL253S- -0075 03 234 26 125 14 275 31 137 16 N/A N/A N/A N/A 6.9 3PAVBL453S- -0075 05 358 40 193 22 N/A N / A N/A N/A 354 4 0 157 18 6.9 3PAVBL253S- -0085 03 307 35 183 21 387 44 211 24 N/A N/A N/A N/A 9.4 4PAVBL453S- -0085 05 456 52 273 31 N/A N/A N/A N/A 503 57 257 29 9.4 4PAVBL253S- -0100 03 495 56 279 32 628 71.0 329 37 N/A N/A N/A N/A 14.4 7PAVBL453S- -0100 05 733 83 417 47 N/A N / A N/A N/A 802 91 378 43 14.4 7PAVBL253S- -0115 03 786 89 442 50 1,044 118 541 61 N/A N/A N/A N/A 24 11PAVBL453S- -0115 05 1,176 133 657 74 N/A N/A N/A N/A 1,352 153 637 72 24 11PAVBL253S- -0125 03 969 110 530 60 1,351 153 640 72 N/A N/A N/A N/A 27 12PAVBL453S- -0125 05 1,412 1 6 0 779 88 N/A N/A N/A N/A 1,762 199 789 8 9 27 12PAVBL453S- -0140 03 1 ,617 1 8 3 853 96 1,910 216 856 97 N/A N/A N/A N/A 45 21PAVBL453S- -0140 05 2,251 254 1,200 136 N/A N/A N/A N/A 2,481 280 1,017 115 45 21PAVBL253S- -0160 04 2,443 276 1,522 1 7 2 2,447 277 1,350 153 N/A N/A N/A N/A 65 30PAVBL453S- -0160 05 2,860 3 2 3 1,917 217 N/A N/A N/A N/A 3,452 390 2,240 253 65 30PAVBL253S- -0200 04 4,040 457 2,686 304 4,788 5 4 1 3,080 348 N/A N/A N/A N/A 111 50PAVBL453S- -0200 06 5,900 667 4,009 453 N/A N/A N/A N/A 5,893 666 3,539 400 111 50PAVBL253S- -0270 05 10,788 1 , 2 1 9 6,915 781 11,495 1 , 2 9 9 6,884 778 N/A N/A N/A N/A 193 88PAVBL453S- -0270 08 14,400 1 , 6 2 7 9,230 1,043 N/A N/A N/A N/A 15,360 1,735 9,220 1,042 193 88

• Operating Pressure Range - 40 psig to 120 psig (2.8 barg to 8 barg)

• Temperature Range: -4ºF to 185ºF (-20ºC to 85ºC)

• Rotation Adjustment: + or - 5º• Namur Pinion and Solenoid Valve Mounting• Bottom of Pinion according to ISO 5211 -

DIN 3337

Sanitary Valves

3

Automation & Controls

Features:

• Compact spool valve with threaded port

• All exhaust ports are pipeable, providing better protection against harsh environments.

• Standard manual override.

• DIN, watertight and explosion-proof solenoids available.

• Single and dual-coil solenoid constructions.

• Mountable in any position.

Electric Actuators

Limit Switches

Postioners• 4-20 mA• 3-15 psi• Nema 4, 7

• Nema 4, 7

Solenoids

Options:• Nema 4, 7• Mechanical Switches• Proximity• Fieldbus• DeviceNet• Visual Indication• AS-i

Sanitary Valves

38

Sanitary Check Valves

HORIZONTAL CHECK VALVEValve Size A B C D

1/2” 0.37 4.00 5.50 1.50

3/4” 0.62 4.00 5.50 1.50

1” 0.87 4.00 5.50 1.50

1-1/2” 1.37 5.50 6.36 1.50

2” 1.87 6.00 7.00 1.50

3” 2.87 7.50 10.25 2.31

4” 3.834 10.00 12.25 2.31

Note: All tube end valves have tangent length oneach end per BPE, 1.50” for 2-1/2 and smaller.

Ordering Codes for PBM Sanitary (Springless) Check ValvesProduct Style Materials of Construction* Line Size* Connection Type* Poppet/Body Seal* Polish Options*

CV VerticalCheck Valve

HL 316L S/S (Standard) C 1/2” X- Tri-ClampTM T PTFE / EPDM A 20 Ra ID / 63 Ra OD (standard)

C- Hastelloy C-276 D 3/4” F- Extended tubestub for weld

C 20 Ra ID / 32 Ra OD

HV HorizontalCheck Valve

P- AL6XN E 1” S PTFE / Viton E 10 Ra ID / 63 Ra ODY- Hastelloy C-22 F 1-1/4” F 20 Ra ID / 63 Ra OD + EP

G 1-1/2” U PTFE / PTFE encapviton o-ring (HV)

H 10 Ra OD 63 Ra OD + EP

H 2” L 20 Ra ID / 32 Ra OD + EP

J 2-1/2” M 316L poppet w/EPDM seat & seal

N 10 Ra ID / 32 Ra OD

K 3” S 10 Ra ID / 32 Ra OD + EP

L 4”

VERTICAL CHECK VALVEValve

TubingSize

A B C D

1/2” 0.37 3.25 4.75 1.50

3/4” 0.62 3.25 4.75 1.50

1” 0.87 3.25 4.75 1.50

1-1/2” 1.37 4.50 5.50 1.50

2” 1.87 4.50 5.50 1.50

3” 2.87 3.75 6.25 2.31

4” 3.834 5.00 7.50 2.31

Note: All tube end valves have tangent length oneach end per BPE, 1.50” for 2-1/2 and smaller and1.75” for 3”.

*Other options available upon request.*Only model HV uses o-ring bonnet seal

Flow

Sanitary Valves

3

Sanitary Check Valves

Vertical (CV)

Horizontal (HV)

Cold Working Pressure CWP = Full vacuum to 235 psigTemperature Range = -10˚F to +300˚FCrack Pressure = 0.3 psiApplications: Gas, Liquid, Low pressure steam

CV (gpm)

Size Vertical Check (CV) Horizontal Check (HV)1/2” 4.1 2.03/4” 10.3 5.31” 10.4 7.9

1-1/2” 19.4 222” 28.2 30

2-1/2” CF N/A3” CF N/A

Materials of ConstructionComponent Material SpecificationBody (CV & HV)Bonnet (HV only)

316L Stainless steel Bar Stock: A479, S31603Hastelloy C-276 Bar Stock: B574, N10276AL6XN Bar Stock: B691, N08367Hastelloy C-22 Bar Stock: B574, N06022

Poppet PTFE Virgin PTFE, USP Class VI316L Stainless steel withinjection molded EPDM seat

Stainless: A479, S31603 Elastomer: EPDM, USP Class VI

Body Clamp gasket (vertical) EPDM USP Class VIBonnet seal (HV) Standard

OptionalEPDMPTFE Encapsulated Viton

USP Class VI

Body Clamp (vertical) 304 Stainless Steel CF8 or F304External Hardware 18-8 Stainless Steel U.T.S. > 60 KSI

Testing: Maximum Allowable Leakage Rates

Standard Surface Finish*

Size PTFE Poppet 316L/EPDM Poppet1/2”, 3/4”, 1” < 5 drops/min @ 3 psi <1 drop/min at 3 psi1-1/2” < 8 drops/min @ 3 psi <1 drop/min at 3 psi2” < 10 drops/min @ 3 psi <1 drop/min at 3 psi2-1/2” – 3” < 10 drops/min @ 3 psi <1 drop/min at 3 psi

Component ID Finish OD Finish TypeBody, Bonnet 20 Ra max 63 Ra max Standard finish, Mechanical PTFE or 316L/EPDM poppet - 20 Ra max Standard finish, Mechanical*Optional finer finishes and electropolish available

Check Valve SpecificationUltra-Sanitary Check Valve, Vertical installation Model CV / Horizontal Installation Model HV, Body and (bonnet for HV) shall be constructed of barstock material, 316L stainless, Hastelloy C-276 or C-22, AL6XN, or others with all internal surfaces 20 Ra or better. Check valve shall use no internalsprings or guides. Poppet shall be constructed of PTFE or 316L with injection molded EPDM seat. Vertical valves (CV) shall be of split body designusing sanitary clamp and USP Class VI gasket. All materials shall be FDA compliant. Elastomers shall be USP Class VI. End connections shall bespecified as sanitary clamp or extended butt weld for US gauge tubing. Extended butt weld in 316L material has 0.005 to 0.017% sulfur control.Valve body shall include marking designating direction of flow.Vertical Installation: PBM Model CV (material) (size) (end connections) (poppet material) (polish)Horizontal Installation: PBM Model HV (material) (size) (end connections) (poppet material) (polish)

United States • Canada • Australia • Mexico • Brazil • Chile • UAEUnited Kingdom • Germany • Sweden • Spain • Belgium • France

Ireland • Switzerland • Austria • The Netherlands India • Taiwan • China • Thailand • Singapore

Visit PBM online atwww.pbmvalve.com

to find the PBM domestic or international representative near you.

PBM, Inc. • 1070 Sandy Hill Road, Irwin, PA 15642Phone: 800.967.4PBM • 724.863.0550 • Fax: 724.864.9255E-mail: [email protected] • Web: www.pbmvalve.com

LT- 34 1/07

PBM, Inc.

Documents

Products Valves Sanitary Pbm Series 9, 2 Way