Processing Machine Processing Jig Carrier Line Pneumatic Components Coolant Control

Products guide formachine tool

1CC-1144A

Coolant Control

Automatic Door / Carrier Device

●Air unit●FRL●Super dryer●Shut-off valve●Pneumatic valve●Pressure switch

●Coolant valve●Coolant check valve●Coolant pressure switch

●Seating confirmation switch●Close contact confirmation switch●Coolant proof cylinder

●Cutting tool broken detecting switch●Solenoid valve for compressed air

●Electric actuator●Rodless cylinder●Stopper cylinder●High speed cylinder●Unit●Hand and chuck

03

05

06

06

07

With insatiable pursuit and reliable technologies, we offer a broad lineup to meet the needs of machine tool as your manufacturing partner.

Machining center

CNC lathe machine

Line for machining

Processing Jig

Processing Tool

Continuing to meet new needs!Air Supply Components

01

Coolant Control

Automatic Door / Carrier Device

●Air unit●FRL●Super dryer●Shut-off valve●Pneumatic valve●Pressure switch

●Coolant valve●Coolant check valve●Coolant pressure switch

●Seating confirmation switch●Close contact confirmation switch●Coolant proof cylinder

●Cutting tool broken detecting switch●Solenoid valve for compressed air

●Electric actuator●Rodless cylinder●Stopper cylinder●High speed cylinder●Unit●Hand and chuck

03

05

06

06

07

With insatiable pursuit and reliable technologies, we offer a broad lineup to meet the needs of machine tool as your manufacturing partner.

Machining center

CNC lathe machine

Line for machining

Processing Jig

Processing Tool

Continuing to meet new needs!Air Supply Components

02

Air Supply Components

A revolution in piping! Hassle free air unit!

High oil-removal performance oil mist filterFRL modular type covers medium range pressure

Air unit

CXU Series

FRL medium pressure type

FM/MM/RM Series

High performance oil mist filter

MX Series

Max. working pressure: 1.6MPaProof pressure: 2.4MPaPort size: (Rc,NPT,G): 1/4, 3/8, 1/2, 3/4, 1

Secondary oil concentration: 0.001mg/m3 or lessFiltration rating: 0.01μmPort size (Rc,NPT,G): 1/8, 1/4, 3/8, 1/2, 3/4, 1

CKD, under the slogan "rendering troublesome piping unnecessary" advocates, through the "CXU" Series air unit, a piping revolution in the machining tool industry. Besides air units, various air pressure devices required for various design of machining tool products are offered in large numbers.Building on a wealth of compressed air management experience, we gave shape customers' ideas about desirable features.

Piping no longer needed! No troublesome piping work! Flexible combination!Modularization of various air instruments that are essential to the actuator drive, and from the filter regulator to the valve. Dramatically reduces conventional design piping layout labor.

Carry out piping layout freelyVertical and horizontal pipes can be arranged freely. Solenoid valves can also be connected directly.Layout is also easy, with significant reductions in piping layout work. (Patent pending)

Change and expand freelyModule joining enables air components to be changed and expanded freely. Removable from the instrument face. Easy maintenance.

CXU connected device

Integrated medium pressure filter, oil mist filter and regulator.Compatible with medium pressure supply needs in overseas markets.Enabled module connection.

10 times the capability of the conventional oil mist filter!Polo silicate micro fiber for quick isolation of oil to prevent pressure loss.Ideal for a variety of applications that require high purification of oil-less air such as laser processing machines and optical positioning devices.

CXU SeriesCXU SeriesCXU SeriesWith the high scalability, guaranteed to flexibly meet your needs in the design of the machining tools.

03

Drain separation efficiency 99%!

Solenoid type shut-off valve that can reliably detect the open and closed states

Safety and flexibility of high air pressure valve

A wide range of variations for ease of use

High performance, energy saving, compact regulator

Strong protection from the external environment and easy expand

Pressure sensor with twin display

Easy-to-use unit type dryer

3 port solenoid valve with spool position detection

SNP Series

3, 5 port pilot operated valve

4GA/B1 to 3 Series

Electronic pressure switch with digital display

PPD3 Series

Precision regulator

RP Series, RPE Series

3, 5 port pilot operated valvePlug-in manifold

W4GB2/W4GB4 Series

Digital pressure sensor

PPX Series

Super dryer

SD/SU Series

Drain separator

FX Series

Actuation: NC (normally closed) typeWorking pressure: 0.2MPa~0.7MPaPort size: Rc3/8, Rc1/2, Rc3/4

Applicable cylinder bore size: up to ø100Response time: 12ms±2ms (4G1 Series)

Working pressure: −100kPa to 980kPa (R10 type)

Switch output type: Output 2 point or output 1 point + analog output

Degree of protection: IP65

Set pressure: More than 0.003 MPa (RP1000-8-02)

Repeatability: Within ± 0.5% of full scalePort size: Rc1/4, Rc3/8

Applicable cylinder bore size: up to ø80 (W4GB2), up to ø125 (W4GB4)

Degree of protection: IP65

Pressure range: −0.1MPa to 1.000MPa (R10 type)

Switch output type: Output 2 point or output 1 point + analog output

Outlet air atmospheric pressure dew point: ① -15ºC, ② -20ºC, ③ -40ºC (At 0.7 MPa)Processing air flow rate: ① 75 to 450ℓ/min,

② 125 to 750ℓ/min, ③ 35 to 890ℓ/min

Port size: Rc3/8

Separation efficiency: 99%Applicable compressor capacity: 0.75kW to 37kWPort size (Rc,NPT,G): 1/4, 3/8, 1/2, 3/4, 1

The limit switch can output a valve opening and closing signal.Two safety cut off circuit is available by modular connection with 2 stations.Unitization with FRL unit is also available.

Accident prevention with protective cover. Tool-free manual equipment.Flexible increase/decrease of station No. Service life 60 million cycles and over!Fluorine rubber specification with anti-corrosion, anti-deterioration properties of the packing also available.

Use integrated sensor or sensor separation-type according to your purpose.Source pressure, suction and seating check.Measurement from vacuum to positive pressure possible.Compatible with degree of protection IP65 which can respond in bad environments.

Stable flow rate with small pressure drop! High precision pressure control!

Sensitivity: Within ± 0.2% of full scale *1000 RP within ± 0.1% sensitivity!

RPE Series with greatly reduced air bleed and 70% lowered air consumption is also available.

Upgraded in all performances, including installation space, workability, life, and power consumption.Connector wiring method is used between manifold blocks.

The "current value" and "set value" of the pressure can be displayed simultaneously, the sensor state can be checked "at-a-glance" with the 3-color display. You can select a mode according to your intended use.

Easy piping by simple direct connection to air pressure source without power supply.Features long life with no mechanical moving part for stable supply of dry air.Unit type with an integrated prefilter, etc., is available.

Ideal for the removal of water droplets from pipes!Lightweight and compact.

04

Coolant control

Low pressure loss and large flow rate! We offer a variety of variations of "CVS" coolant valves such as those with 2-port, 3-Port and manifold specifications, and items that are ideal for preventing coolant contamination with foreign matter, chips, etc.

Coolant valve module connection!

Foreign matter-resistant coolant check valve

Electronic pressure switch for coolant

Low pressure loss and large flow rate coolant valve

Mechanical pressure switch for coolant

Coolant valve

CVSE2 Series

CVSE3 Series

Mechanical pressure switch for coolant

CPE Series

Module coolant valve

GCVE2 Series

GCVSE2 Series

Coolant check valve

CCH Series

Electronic pressure switch for coolant

CPD Series

Working pressure differential: ① 0 to 0.5Mpa, 0 to 1.0Mpa (Low pressure) ②0 to 1.6Mpa, 0 to 3.0Mpa (Middle pressure) ③ 0 to 7.0Mpa (High pressure)Port size: 10A to 80F

Rated pressure: 0 to 1.0MpaSet pressure: 0.05 to 0.8MpaPort size: Rc1/4Degree of protection: IP65

Working pressure differential: 0 to 0.5Mpa, 0 to 1.0Mpa (Low pressure), 0 to 1.6Mpa (High pressure)Port size: 15A (IN: 20A), 20A (IN: 25A)Valve pitch: 15A: 50mm, 20A: 60mm

Max. working pressure: 7.0MpaProof pressure: 14MpaPort size: 10A, 15A, 20ACranking pressure: 5kpa

Rated pressure: 0 to 7.0MpaSet pressure: 0. to 7.0MpaPort size: Rc1/4Degree of protection: IP65

With reliable direct acting, power consumption can be reduced 50% (CKD comparison).Zero pressure loss target valve flow path shape.Metal seal type valve structure resistant to contamination from cutting powder, grains, etc.Contribute to downsizing of coolant pump and energy saving of coolant system. Custom order up to 20Mpa is available.

Mechanical pressure switch for low pressure applicable for coolant. Diaphragm structure has been adopted for pressure receiving portion.Machining tool coolant pressure and hydraulic/oil pressure of various other industrial machinery can be checked.

Electronic pressure switch applicable for coolant (with digital display).Diaphragm structure has been adopted for pressure receiving portion.Machining tool coolant pressure and hydraulic/oil pressure of various other industrial machinery can be checked.

Coolant valve CVSE Series body to change shape and connect to the module. Up to 5 stations are available. Header space no longer required and space saving. This has a reduction effect on piping arrangement work, and total cost of equipment will be reduced.

Foreign matter-resistant flow path structure.We have adopted a seal structure that reduces O-ring deformation, and resists high pressure (Proof pressure 14.0 MPa).

05

Processing jig

Processing tool

Trusted and proven! CKD seating switch "GPS2" Series, and cutting oil special measures structure cylinder "G2, G3" Series enable highly accurate and stable clamp/positioning.

Nips errors/failure in the bud! Highly efficient air blow that prevents workpiece from floating by chips caught in the machinery! Small sized, large air blow valve available. Small-diameter tool damage is stably detected by the air sensor and the machine is stopped immediately.

Large flow rate and low power consumption solenoid valve for the compressed air

Min. detection distance 0.01mm! High precision detection!

Detection of cutting tool breakage of 1mm

Bridge circuit provides stable non-contact detection

Cylinder that resists coolant Cylinder switch that resists coolant

Snug fit in the compressed air

Cutting tool broken detecting switch

TLPS Series

UTLPS Series

Seating confirmation switch

GPS2 Series

UGPS2 Series

Coolant proof cylinder

G2 Series/G3 Series

Cylinder switch for coolant

SW-T2YLH (V) Series

SW-T3YLH (V) Series

2 port direct acting solenoid valve for compressed air

FAB Series

2 port pilot operated solenoid valve for compressed air

EXA Series

GEXA Series

Close contact confirmation switch

HPS Series

UHPS Series

Detection cutting tool diameter: ø0.3 to ø30Cutting edge detecting position: 1 mm and over from endPort size: Rc1/8 (detection port) , Rc1/4 (supply port, pressure gauge port)Degree of protection: IP67 equivalent (connector type) , IP64 equivalent (DIN terminal box)

Detection distance range: ① 0.03 to 0.25mm, ② 0.03 to 0.4mmRepeatability: ±0.01mmPort size: Rc1/8 (detection port), Rc1/4 (supply port, pressure gauge port)Degree of protection: IP67 equivalent (connector type), IP64 equivalent (DIN terminal box))

Applicable degree of protectionG2: Powerful nitrile rubber scraper for coolant

intrusion prevention was adopted.G3: In addition to G2, swelling prevention

fluorine rubber packing was adopted.Degree of protection: IP67Lead wire: Oil resistant vinyl cabtyre cable

Working pressure: 0 to 1.4MPaDegree of protection: IP65 equivalentProof pressure (water): 2.1MPa

(However, only FAB11 • 21 are 1.5 MPa.)

Max. working pressure: 0.7MPaWorking pressure differential: 0.01 to 0.7MPaProof pressure (water): 1.05MPa

Detection distance range: ① 0.01 to 0.2mm, ② 0.02 to 0.3mm, ③ 0.05 to 0.7mmRepeatability: ±0.005mmPort size: Rc1/8 (detection port), Rc1/4 (supply port, pressure gauge port)Degree of protection: IP67 equivalent (connector type) , IP64 equivalent (DIN terminal box)

Non-contact air sensor used to detect broken or chipped drills and taps used in the metal machining line even during rotation. Detection nozzles are special nozzle units tailored to the cutting tool. Detection is possible without the influence of supply pressure fluctuations by adopting the air bridge type.

Air sensor used to check the workpiece seating and the clamp.Air bridge circuit prevents the affect of the fluctuations in the supply pressure. The product can be used in the environment where coolant, etc., splash, due to the degree of protection IP-67 (connector type).

The powerful scraper prevents working oil from entering!Applicable to various cylinders.

Cylinder switch that withstands proximity 2-wire, 3-wire type cooling environment and responds to cutting oil

Direct-acting poppet solenoid valve.5 models with coil width 18 to 40mm.Moving parts in the special structure to prevent wear and long service life.

Flow Rate 450ℓ/min or more (if primary-side pressure at 0.5 MPa), power consumption of 0.6W, large flow rate and low power consumption. Optimization of the materials used ensures compactness and lightness! Easily layout piping due to the body design with push-in fittings.Manifold also supported.

Precision linear needle mechanism enables highly accurate variable-adjustment. Stable detection, unaffected by fluctuation of supply pressure, is possible with the air bridge circuit. Can be supported in the environment where coolant, etc., splash, due to the degree of protection IP-67.

06

Automatic door / Carrier device

Pneumatic and electric actuators with guide required for autoloader/palletizer can be selected from wide variations of the products. Hand, fitted to workpiece shape, and chuck with cover, resistant to chips and coolant, provide stable unattended operation. For simple transfer, complete multi-axis units are also available.

Compact and light weight actuatorHigh performance actuator using absolute motor

As easy control as pneumatics!

Electric actuator

KBB Series

Electric driven actuator

ESSD Series

Electric driven actuator

KBZ Series

Max. load capacity: up to 150kg (horizontal)Max. stroke length: 2500mmMax. speed: up to 2000mm/sec (belt axis type)Repeatability: ±0.01mm (Ballscrew type)

Max. load capacity: up to 150kg (horizontal)Max. stroke length: 1500mmMax. speed: up to 2000mm/secRepeatability: ±0.02mmApplicable motor size: 100W, 200W, 400W, 750W

Max. load capacity: up to 30kg (horizontal)Max. stroke length: 700mmMax. speed: up to 600mm/secMax. pressure force: 640NRepeatability: ±0.02mm

Max. load capacity: up to 25kg (vertical)Max. stroke length: 200mmMax. speed: up to 400mm/secRepeatability: from ±0.05mm

Max. load capacity: up to 6kg (horizontal)Max. stroke length: 500mmMax. speed: up to 800mm/secRepeatability: ±0.02mm

2 to 4 axis enables various combinations. Absolute specifications adopted to eliminate need for encoder origin return. There are 9 types of ballscrew and 7 types of the timing belt for axis. The motor installation position can be selected from one of the four directions for each axis.

New electric actuators that are easy to use as pneumatic components! Operates with the same sequence as a solenoid valve that control cylinders. Cylinder switches can also be mounted to detect position.

Compact, high output servo motor.Slider/table/rod type available (three types)Can be combined with KBB axis.

Motorless actuator

Easy operation with light indication

Electric actuator

ETS Series

Electric actuator

ERL2 Series

Supporting various servo motor manufacturers, familiar motors can be mounted.Diverse range of variations available.

With the controller common on all models and installation of actuator automatic recognition, flexible combination of actuator and controller is available.

Rodless cylinder with dust-proof coverRodless cylinder full cowling type

SRL3-J Series

Bore size: ø25, ø32, ø40, ø50, ø63Max. stroke length: to 3000mmMax. working pressure: 0.7MPa

Rodless cylinder with metal cover that is resistant to bad environments.Safe even in places that take metal powder, cutting oil, etc. directly.

07

Able to withstand high loads and is space-saving

Ideal for door opening/closing!

Powerfully absorbs shocks

Absorber-integrated stopper cylinder

High speed operation, high energy absorption

Stopper cylinder

STK Series

High energy absorption cylinder

HCM Series

Guided cylinder powerful guide rod type

STG-K Series

Stopper cylinder

STA2 Series

High speed cylinder

HCA Series

Bore size: ø20, ø32, ø40, ø50Stroke length: 10mm, 15mm, 20mm

(ø20, ø32) 20mm, 25mm, 30mm

(ø40, ø50)

Bore size: ø20, ø25, ø32, ø40, ø50, ø63

Max. stroke length: up to 700mm (ø20, ø25, ø32) up to 1000mm (ø40, ø50, ø63)Working piston speed: 50 to 2000mm/s

Bore size: ø32, ø50Stroke length: 5 to 200mm

Bore size: ø50Stroke length: 30mm

Bore size: ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100

Max. stroke length: up to 700mm (ø20, ø25, ø32) up to 1000mm (ø40, ø50, ø63, ø80, ø100)Working piston speed: 50 to 3000mm/s

This lateral load resistant square shaped space saving cylinder is optimum for applications such as lateral load is applied. Choose from three types: round rod type, chamfered type ,and roller type.

High speed driving, high energy absorption are available.Compared with the conventional cylinder , features approximately 5 times the shock absorbing capacity.Ideal for use in medium speed range with heavy load.

Load resistant, impact resistant series.Ideal for stoppage of workpiece with strong impact.

With the adoption of the adjustable shock absorber, you can adjust in accordance with workpiece weight and conveyor speed.Replacing the shock absorber alone is possible.Resin or steel is selectable as the roller materials.

High speed cylinder.compatible with piston speed of 3000mm/sEven with high speed sliding, the excellent new materials adopted are durable enough.

2-action pneumatic robot Small size and high retention lock unit

Assembly as if assembling plastic modelNew handling system

NHS Series

Hybrid robot

HR Series

Linear guide lock

LML Series

X-axis cylinder bore size: ø20, ø32, ø40X-axis max. load capacity/max. stroke: 50kg/2000mmX-axis slider speed: 100 up to 1000mm/sZ-axis cylinder bore size: ø20, ø25, ø32, ø40, ø50Z-axis max. load capacity/max. stroke: 33kg/600mmZ-axis speed: 50 to 300mm/s

〈2-action pneumatic robot〉Max. load capacity: 5kgStroke length: 50 to 300mm (X-axis), 25 to 150mm (Z-axis)Max. speed: 300mm/s〈Single axis unit〉Max. load capacity: 65kgStroke length: 50 to 300mm (Basic body shape),

350 to 600mm (Long body shape)Max. speed: 500mm/s

Rail width: 15/20/25/30/35mmResponse guide manufacturer: THK/Nippon ThompsonHolding force: 300 to 1150N

Small object parts transfer kit which offers compact design with flexible combination. X-axis, Z-axis, and attachment are appropriately selected according to the use.Selection, design manhours, assembling manhours and control manhours can be reduced.

Pick & place unit that basically consists of the horizontal drive R-axis and vertical drive Z-axis.Position detection switch, shock absorber and speed control valve are provided as standard.Position locking mechanism can be installed according to applications.

Due to the same height as the linear guide blocks, optimal free space use possible.Ideal for retention and fall prevention during linear guide stoppage.Also available with a scraper as dust-proof measures.

08

Automatic door / Carrier device

Small wide parallel hand

HMF Series

Bearing parallel hand

HEP Series

3-way jaw bearing chuck

CKG Series

Thin chuck

CKS Series

Cross roller parallel hand

HKP Series

Thin type parallel hand with rubber cover

HLAG/HLBG Series

3-way jaw long stroke chuck

CK Series

Ultra long stroke chuck

CKJ Series

Parallel hand

HAP Series

Thin parallel hand

HLA/HLB Series

3-way jaw thin chuck

CKA Series

High gripping force powerful chuck

CKH2 Series

Operational stroke length: Standard 30, 40, 50, 70, 100mmLong 60, 80, 100, 120, 160, 200mmGripping force (Indication)*: 30 to 400N

Operational stroke length: 24, 36, 40, 50, 60mmGripping force (Indication)*: 80 to 1000N

Operational stroke length: 24, 30, 36, 40, 60mmGripping force (Indication)*: 150 to 900N

Operational stroke length: HLAG 15, 20, 25mm HLBG 13, 18, 23mmGripping force (Indication)*: 20 to 70N

Operational stroke length: 8mmGripping force (Indication)*: 10 to 100N

Operational stroke length: HLA 15, 20, 25mm HLB 13, 18, 23mmGripping force (Indication)*: 20 to 70N

Operational stroke length: 5, 6, 7, 9, 20, 25, 30, 38mmGripping force (Indication)*: 5 to 700N

Operational stroke length: 6, 8, 10, 12mmGripping force (Indication)*: 250 to 1500N

Operational stroke length: 20, 40mmGripping force (Indication)*: 10 to 100N

Operational stroke length: Standard 80, 130mmShort 40, 65mmGripping force (Indication)*: 30 to 1500N

Operational stroke length: 6, 8, 11, 16mmGripping force (Indication)*: 10 to 200N

Operational stroke length: 10, 12, 16, 20, 28, 32mmGripping force (Indication)*: 10 to 400N

■ Parallel hand

■ Chuck

* Supply pressure 0.5 MPa, general jaws length gripping force range.

Extensive variation allows for application to various workpiece shape

Supporting handling with wide variation such as thin, light weight, wide stroke length and high precision type, etc.Hand and chuck Series with ultimate easy operating

09

Global service network

CKD CORPORATION EUROPE BRANCH

CKD USA CORPORATION

CKD CORPORATION BRANCH OFFICE (ASIA PACIFIC)CKD SINGAPORE PTE. LTD.

TAIWAN CKD CORPORATION

CKD CORPORATION

M-CKD PRECISION SDN.BHD.

CKD THAI CORPORATION LTD.CKD VIETNAM ENGINEERING CO., LTD.

CKD (SHANGHAI) CORPORATION

CKD KOREA CORPORATION

CKD builds customers trusts through its global network.

In order to deliver optimal products, technology and services promptly from a customer's standpoint, we are promoting development of our foreign and domestic bases, and building customers trusts. In particular, in the overseas bases, we have established offices in major regions of Asia, Europe, North America and we have been building closer relationships with customers of various regions of the world.

PT CKD TRADING INDONESIA

Website introduction

http://www.ckd.co.jp/english/PDF/DXF data of general catalog is

CKD websiteComponent Products ＞

New products DXF/PDF data is

New ProductInformation

CKD websiteComponent Products ＞

2D and 3D CAD data is

2D・3DCAD Data library

CKD website Component Products ＞

Model searchfunction added

You can download CKD products PDF catalog or CAD data.

CKD products catalogsDownload Service

Adding a modelsearch function

We have added a simple model search to Equipment top page to allow you to navigate easily to information page.

10

TAIWAN CKD CORPORATION

CKD UK OFFICE

CKD EUROPE BRANCH

CKD GERMANY OFFICE

CKD CZECH OFFICE CKD SINGAPORE PTE. LTD.CKD CORPORATION BRANCH OFFICE

M-CKD PRECISION SDN.BHD.

CKD THAI CORPORATION LTD.

CKD CORPORATIONINDIA LIAISON OFFICE(BANGALORE,DELHI)

：Distributors

CKD USA CORPORATION

CKD KOREA CORPORATION

CKD（SHANGHAI） CORPORATION

PT CKD TRADING INDONESIA

CKD FRANKFURTOFFICE

CKD VIETNAM ENGINEERING CO.,LTD

●Specifications are subject to change without notice.

The goods and their replicas, or the technology and software in this catalog are subject to complementary export regulations by Foreign Exchange and Foreign Trade Law of Japan.If the goods and their replicas, or the technology and software in this catalog are to be exported, laws require the exporter to make sure they will never be used for the development or the manufacture of weapons for mass destruction.

2015.3.DBCCKD Corporation 2015 All copy rights reserved.

Website http://www.ckd.co.jp/

U.S.A.CKD USA CORPORATION●CHICAGO HEADQUARTERS

4080 Winnetka Avenue, Rolling Meadows, IL 60008, USAPHONE +1-847-368-0539 FAX +1-847-788-0575

・CINCINNATI OFFICE・SAN ANTONIO OFFICE・SAN JOSE OFFICE・DETROIT OFFICEEuropeCKD CORPORATION EUROPE BRANCH

De Fruittuinen 28 Hoofddorp, the NetherlandsPHONE +31-（0）23-5541490 FAX +31-（0）23-5541491

・CZECH OFFICE・UK OFFICE・GERMANY OFFICE・FRANKFURT OFFICEMalaysiaM-CKD PRECISION SDN.BHD.●HEAD OFFICE

Lot No.6,Jalan Modal 23/2, Seksyen 23, Kawasan MIEL,Fasa 8, 40300 Shah Alam,Selangor Darul Ehsan, MalaysiaPHONE +60-（0）3-5541-1468 FAX +60-（0）3-5541-1533

・JOHOR BAHRU BRANCH OFFICE・MELAKA BRANCH OFFICE・PENANG BRANCH OFFICEThailandCKD THAI CORPORATION LTD.●SALES HEADQUARTERS

Suwan Tower, 14/1 Soi Saladaeng 1, North Sathorn Road, Kwaeng Silom, Khet Bangrak, Bangkok 10500, ThailandPHONE +66-（0）2-267-6300 FAX +66-（0）2-267-6305

・RAYONG OFFICE・NAVANAKORN OFFICE・EASTERN SEABOARD OFFICE・LAMPHUN OFFICE・KORAT OFFICE・AMATANAKORN OFFICE・PRACHINBURI OFFICE・SARABURI OFFICE

SingaporeCKD SINGAPORE PTE. LTD.

No.33 Tannery Lane #04-01 Hoesteel Industrial Building, Singapore 347789, Singapore PHONE +65-67442623 FAX +65-67442486

CKD CORPORATION BRANCH OFFICENo.33 Tannery Lane #04-01 Hoesteel Industrial Building, Singapore 347789, Singapore PHONE +65-67447260 FAX +65-68421022

・INDIA LIAISON OFFICE BANGALORE・INDIA LIAISON OFFICE DELHIIndonesiaPT CKD TRADING INDONESIA

Wisma Keiai, 17th Floor, Jl. JendralSudirman Kav.3, Jakarta 10220, IndonesiaPHONE +62-（0）21-572-3220 FAX +62-（0）21-573-4112

VietnamCKD VIETNAM ENGINEERING CO.,LTD.

18th Floor, CMC Tower, Duy Tan Street, Cau Giay District, Hanoi, Vietnam PHONE +84-4-37957631 FAX +84-4-37957637

Taiwan台湾喜開理股　有限公司TAIWAN CKD CORPORATION

16F-3, No. 7, Sec. 3, New Taipei Blvd., Xinzhuang Dist., New Taipei City 242, TaiwanPHONE +886-（0）2-8522-8198 FAX +886-（0）2-8522-8128

・新竹営業所（HSINCHU OFFICE）・台中営業所（TAICHUNG OFFICE）・台南営業所（TAINAN OFFICE）

China喜開理（上海）機器有限公司CKD(SHANGHAI)CORPORATION●営業部 / 上海浦西事務所（SALES HEADQUARTERS / SHANGHAI PUXI OFFICE）

Room 601 6th Floor, Yuanzhongkeyan Building, No. 1905 Hongmei Road, Xinhui District, Shanghai 200233, ChinaPHONE +86-（0）21-61911888 FAX +86-（0）21-60905356

・上海浦東事務所（SHANGHAI PUDONG OFFICE）・無錫事務所（WUXI OFFICE）・杭州事務所（HANGZHOU OFFICE）・寧波事務所（NINGBO OFFICE）・南京事務所（NANJING OFFICE）・蘇州事務所（SUZHOU OFFICE）・昆山事務所（KUNSHAN OFFICE）・北京事務所（BEIJING OFFICE）・天津事務所（TIANJIN OFFICE）・長春事務所（CHANGCHUN OFFICE）・大連事務所（DALIAN OFFICE）・青島事務所（QINGDAO OFFICE）・済南事務所（JINAN OFFICE）・烟台事務所（YANTAI OFFICE）・瀋陽事務所（SHENYANG OFFICE）・重慶事務所（CHONGQING OFFICE）・成都事務所（CHENGDU OFFICE）・西安事務所（XIAN OFFICE）・武漢事務所（WUHAN OFFICE）・鄭州事務所（ZHENGZHOU OFFICE）・長沙事務所（CHANGSHA OFFICE）・広州事務所（GUANGZHOU OFFICE）・深圳事務所（SHENZHEN OFFICE）・東莞事務所（DONGGUAN OFFICE）・厦門事務所（XIAMEN OFFICE）KoreaCKD KOREA CORPORATION●HEADQUARTERS

(3rd Floor), 44, Sinsu-ro, Mapo-gu, Seoul 121-856, KoreaPHONE +82-(0)2-783-5201～5203 FAX +82-(0)2-783-5204

・水原営業所（SUWON OFFICE）・天安営業所（CHEONAN OFFICE）・蔚山営業所（ULSAN OFFICE）

□ 2-250 Ouji Komaki, Aichi 485-8551, Japan□ PHONE +81-(0)568-74-1338 FAX +81-(0)568-77-3461