Products > Finishes
FINISHES
Pemco Lighting Products produces state-of-the-art finishes. In
addition to the many standard colors available, custom colors can
be applied to enhance and contrast a specific installation. Most
RAL colors are available to match poles and fixtures. Standard
finish on all fixtures and am,s is a highly durable polyester
powder coat resin which contains UV inhibitors. This is an
electrostatically applied polyester powder coat over a 5-stage
pre-treatment process, the best known pretreatment available. THE
FIVE-STAGE
PHOSPHATE
PRETREATMENT
PROCESS:
1. Detergent and degrease. 2. Clean water rinse. 3. Phosphate
bath-the best known pretreatment of aluminum for corrosion
resistance and paint adhesion. 4. Clear water rinse bath. 5. Hot
water clean rinse. After the pretreatment process, the final steps
are: 10. Powder coating-2.5 mil nominal thickness. 11. Bake for 28
to 35 minutes at 375-425° depending on the powder.
ENVIRONMENTAL MARINE GRADE Powder coatings are designed
BENEFITS: Marine Grade finishes start to be a si�gle coat
finis�ing The chemicals that are with a zinc rich primer that
syst�m._with the _exception of used in the cleaning and is
partially cured before appllcallo�s within extremely pre-treatment
process are applying the top coat. After harsh environments, such
as environmental baking, the primer and top marine and coastal
regions. non-destructiv�. no voe coat cross link, fanning an
(volutile organic extremely durable finish compounds) emissions
approaching 7 mils in (Mercury or Lead). thickness. These finishes
The powder coating are very good for salty process does not use
atmospheres. The system solvents. Waste is minimal, is a two-coat
process easily and safely disposed combining optimum of as well.
corrosion protection with
highest weatherability. This two-coat system produces an optimum
non-porous film as well as excellent UV protection through the use
of high quality polyester powder coatings.
�E:'.';t;t:; Lighting Products, Inc. 150 Pemco Way-Wilmington,
DE 19804 Phone 302.892.9000 Fax 302.892.9005 www.pemcolighting.com
[email protected]
