PRODUCTS ANDSERVICES At a glance

ELTEK DEUTSCHLAND GMBH

Eltek Deutschland is a full-range provider

of protected power supplies for the telecom,

renewable and OEM power industries and

industrial applications.

Over 125 years’ experience in electrical

engineering and power supply technology

are the reason for the success of our products.

Being part of the international Eltek Group

assures access to global resources, sales

and service channels as well as our leading

position in the market.

We support you with highly efficient

technologies, innovative solutions and

customised services

- flexibly and reliably.

MODULAR COMPONENTSwww.eltek.de

RECTIFIER

Micropack 48 V/250 W/5.2 AOption: 12 V/120 W/10 A; 24 V/240 W/10 A• Efficiency 93% (<at low voltage)• Convection cooled• Stand-alone installation on DIN-rail possible (adapter)• Alarm contact• Input voltage range 85-300 VAC / 85-300 VDC• Operating temperature -40° to +75°C (derating > +55°C)• also designed as DC/DC converter

Flatpack S 48 V/1000 W/20.9 AOption: 24 V/1000 W/41.7 A• Efficiency > 95%• Temperature-controlled fan• Input voltage range 85-300 VAC / 85-250 VDC• Operating temperature -40° to +85°C (derating > +45°C)• Optional: SIL 3

Flatpack S 48 V/1800 W/ 37.5 A• Efficiency > 95%• Temperature-controlled fan• Input voltage range 85-300 VAC / 85-250 VDC• Operating temperature -40° to +85°C

Flatpack2 48/2000 HE/ 41.7 AOption: 24V/1800 W, 60 V/2000 W, 110 V/2000 W, 220 V/2000 W, 380 V/3000 W• Efficiency > 96% (power range 30% - 70% of the output)• Temperature-controlled fan• Input voltage range 85-300 VAC / 140-275 VDC• Operating temperature -40° to +75°C (derating > +45°C)• Compatible with Flatpack2 (48V/2000W)• also designed as DC/DC converter

Flatpack2 48/3000 HE /62.5A• 48 V/3000 W• Efficiency > 95.5% (power range 25%–75% of the output)• Temperature-controlled fan• Input voltage range 85–300 VAC• Operating temperature -40° to +75°C (derating > +45°C)

Flatpack2 48/1500 HE Solar• 48 V/1500 W/31.3 A• Efficiency > 96% (power range 30% - 80% of the output)• Temperature-controlled fan• Input voltage range 85-265 VDC• Operating temperature -40° to +75°C (derating > +55°C)• Mechanically compatible with Flatpack2

Flatpack 2 48/3000 HE Wind• 48 V/3000 W/max. 62.5 A• Efficiency 95%• Input voltage range 85-210 VAC / 85-300 VDC• Operating temperature -40°C to +75°C (derating > +45°C)• Separate subrack

The illustrations do not correspond to the actual sizes.

MODULAR COMPONENTS

Inverters VEDA, MEDIA, BRAVO• VEDA 1U/19“ 48 VDC / 230 VAC / 500 - 1500 VA1 - 2 modules 500 VA without feeder circuit, with 2 x consumer outputs on front1 - 3 modules 500 VA with consumer terminals on rear

• MEDIA 2U/19“ 48 VDC / 230 VAC / 1500-6000 VA1 - 4 modules 1500 VA, built-in semiconductor switch for feeder circuit

• BRAVO 2U/19“ 60 VDC / 230 VAC / 2500-10000 VA1 - 4 modules 2500 VA, built-in semiconductor switch for feeder circuit

inverter INV 211/INV 222• INV 211 AC Output: 1.225 kVA• INV 222 AC Output: 2.25 kVA• Optional 3 phase

INVERTER

www.eltek.de

STATIC BYPASS SWITCH

Static bypass switch STS203/ STS207• Nominal switching capacity 3 kVA (STS203) 7 kVA (STS207)• SNMP interface and monitoring by Web-Browser included

Static bypass switch STS118• Nominal switching capacity 18 kVA• SNMP interface and monitoring by Web-Browser included

The illustrations do not correspond to the actual sizes.

MODULAR COMPONENTS

CONTROLLER

Compack• Functions cf. Smartpack, with Ethernet port• Display and control keys, without LCD, 3 x LED• Designed for compact systems of the type Micropack and Minipack 1U• Communication via WEB/SNMP, Power Suite

Smartpack• Optional: USB, RS-232, USB + Ethernet• User interface: 3 x LED, two-line LCD display + 3 keys• Monitoring and control functions: AC mains, rectifier, solar chargers, load, batteries, generating set, control system, inputs/outputs (alarm), Ethernet / WEB server / SNMP• Communication via WEB/SNMP, PowerSuite

Smartpack S• Compact design: user-friendly display, simple control keys, Ethernet I/O connections• Communication via WEB/SNMP, PowerSuite, large memory for event log

Smartpack 2Industrial Basic as option

• Distributed control system: display and communication plus control unit and I/O unit• Advanced functions: large memory for event log, backup on SD card possible, 3 x low voltage disconnect• Communication WEB/SNMP, PowerSuite• Master module (can be installed separately on the door or on the remote control panel) colour TFT display, control keys, Ethernet port, SD card slot

UPC4• Extensive battery management • Freely programmable signaling concept• Communication via WEB/SNMP, MMT-Software• Modbus integrated

www.eltek.de

The illustrations do not correspond to the actual sizes.

www.eltek.de

SYSTEM SOLUTIONS

EMBEDDED-SYSTEMS

Modular systems MicropackThe Micropack power supply systems are designed for simple applications from a stand-alone rectifier module on a DIN rail through to systems withfour rectifiers, battery and load breakers in addition to a control unit with monitoring via Ethernet port. The modular design permits installation on a DIN rail provided by the customer.

Minipack systemsThe Minipack systems are compact units (1U or 2U/19“/250 mm). The smallest Minipack system (1U/19“/250 mm) has a max. output power of 48 V/1600 W/33 A and features battery and consumer distribution in addition to a control unit with a Compack controller.The 2U systems (19“/250 mm) with 4 x Minipack (3200 W) and 6 x Minipack (4800 W) offer advanced functions and customised consumer distribution.

Flatpack S systemsThe Flatpack S systems are characterised by their extremely compact dimensions and high efficiency.The systems are ideally suited for applications in confined spaces or in switch cabinets. The modular design offers optimum flexibility. In a 1U subrack (19“/250 mm), it is possible to accommodate a rectifier power of up to 3 kW, 3 options for consumer distribution, 2 battery disconnectors, battery low voltage disconnect plus an alarm and battery monitoring system.

Hybrid solutionsThe Eltek hybrid solution for supplying power to stand-alone and grid-connected sites.The modular design means that the systems are scalable and can be optimally adapted to the specific requirements. The Eltek Smartpack2 Controller acts as a central control and monitoring unit for the entire system incl. remote access.The hybrid system integrates the grid, photovoltaics, wind power in addition to fuel cells and generators as power supply sources. The high availability and the high-efficiency technology of all the Eltek components guarantee a reduction in energy costs. The lower consumption of fossil fuels reduces CO² emissions and actively contributes towards the protection of the environment.

The illustrations do not correspond to the actual sizes.

www.eltek.de

SYSTEM SOLUTIONS

EMBEDDED-SYSTEMS

Flatpack2 systems – from compact to very largeFlatpack2 systems are suitable for a broad range of telecom applications. The systems feature an excellent modular design, which, thanks to the use of 2000/3000 W modules with a high efficiency and a cooling system, permit a power of up to 96 kW /144 kW in switch cabinets. In a 2U subrack (19“/380 mm), it is possible to accommodate a power of up to 8 kW, 6 load distributors with disconnectors, 2 battery disconnectors, 1 control unit, battery low voltage disconnect, load disconnection at low voltage and an alarm moni-toring system.

Flatpack2 Integrated 19“ HE The integrated 19“ 2U power supply is built around the Flatpack2 rectifier and is designed for applications such as switchgear, telecom, emergency lighting and alarm systems.Its compact design and simple installation make it a powerful 19“ power supply package. The rectifier`s wide DC output range makes it suitable for parallelperation with all types of stationary batteries, including lead acid, or nickel cadmium types.

Wallbox MicropackThe Micropack Wallbox is designed for industrial and telecom applications with power requirements in the range of 120-1000W.Its compact design, simple installation and optional internal backup batteries make it a real „micro“ DC backupsystem.Also available as Flatpack2 version.

The illustrations do not correspond to the actual sizes.

SYSTEM SOLUTIONS

STAND-ALONE SYSTEMS

www.eltek.de

HYBRID SYSTEMS

UPS-INSTALLATIONS

Stand-alone systems for indoor and outdoor applicationsFor your applications, we offer matching cabinet solutions for indoor and outdoor use:

• Space-saving• Weatherproof• incl. filter solution (standard) optional heat exchanger or air conditioner

Inverters and storage solutions We offer you highly efficient inverters and storage systems for your photovoltaic projects:

• Central inverters 20 to 500 kW• String inverters 2 to 22 kW• Container solutions up to 1.5 MW• Storage solutions• Remote monitoring• Site management systems

UPS installationsAre you looking for customised solutions for optimum UPS protection? Our hot-swap modular system components offer maximum reliability:

• mono / parallel: 1 kVA ... several MVA• modular: 10 kVA ... several 100 kVA

The illustrations do not correspond to the actual sizes.

SERVICES

CUSTOM OEMWe support you in the implementation

of your specific product requirement.

Trust in our expertise.

From the technical development to

the product design through to the

manufacturing of prototypes and

serial production, we offer a full-range

service.

SERVICESOur customised services

guarantee the longevity and smooth

functioning of all Eltek products.

• Installation and commissioning

• Technical support

• Expert advice 24/7 hotline

• Preventive maintenance

• Extended warranties

• Repair service

• Seminars and training courses

www.eltek.de

CONTACT

Headquarters FrankfurtFerdinand-Porsche-Straße 4560386 Frankfurt a.M. GermanyPhone: +49 69 420 02-0www.eltek.de

Business Unit IndustrialSchillerstr. 1632052 Herford GermanyPhone +49 5221 1708 200