Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
12/19/2019
1
Z e r s p a n u n g s w e r k z e u g e v o m F e i n s t e n
ProductinformationNews 2020
Productextension 2020
News 2020
Ultramini - DT Line
Minicut - R/LS07
System DED
Broaching - System NV10
12/19/2019
2
Productinformation Ultramini
Ultramini – DT Line
Multifunction tools for drilling and boring
Ømin 2.9 – 7.7mm
Drilling depth (L1) up to 4 x ø
Including internal cooling
Productinformation Ultramini
Ultramini – DT Line
Tool holder with 4 clamping surface – 4 x 90°
Clamping with Torx screw
Available with ø 16 / ø19.05 / ø20 / ø22 – Length 60mm
Including internal cooling
Can be used also for the standard Ultramini program
12/19/2019
3
Productinformation Ultramini
Ultramini – DT Line
Insert including internal cooling
Attention: Clamping surface overhead!
Universal coating AL41F
Cutting depth ½ x ø possible by boringDrilling in the full material
Productinformation Ultramini
Ultramini DT Line - Competitors
Iscar - ø min 3.0 – 7.0PICCO MF - L1 up to max. 3 x ø
- without internal cooling
Simtek - ø min 3.7 – 8.0- L1 up to max. 4 x ø (ø7+8 only 3 x ø)- Good performance
Ceratizit - ø min 2.0 – 8.0 / L1 up to 4 x øEcoCut - additional adapter for clamping
- Big product range
12/19/2019
4
Productinformation Ultramini
Important selling points – DT Line
Prooven very good repeating accuracy
Very universal
Very deep cutting depth possible
Productinformation Minicut
Minicut – System R/LS07
Starting from ø 7.0mm
Inserts for boring, grooving, profiling, chamfering andthreading
12/19/2019
5
Productinformation Minicut
Minicut – System R/LS07
Special adapter for to clamp in the standard Ultraminiholder
Available length: 20 / 30 / 40 / 50 / 60mm
Productinformation Minicut
System R/LS07 – Important selling points
Higher lifetime because of sharp inserts
AL41F as standard coating
Price interesting steel tool holder
Not compatible with Horn Mini / compatible with SimtekDelta-Line
Very high repeating accuracy with +-0.015
Repeating service for carbide tool holder
Perfect alternative for applications where you use at themoment Ultramini with ø7.0mm
12/19/2019
6
Productinformation Minicut
Minicut – System R/LS07 - calculation example
10 x R050.7-50/AL41F = 41,20 €/Stk. 412,-10 x R07.1841.02/AL41F = 14.10 €/Stk. 141,-1 x 607.A06.50HM = 157,10 €/Stk. 157,10
total amount = 298,10
10 x R050.7-30/AL41F = 29,15 €/Stk. 291,5010 x R07.1841.02/AL41F = 14.10 €/Stk. 141,-1 x 607.A06.30HM = 146,70 €/Stk. 146,70
total amount = 287,70
Savings = 113,90 (with 10 pcs.)
Savings = 3,80 (with 10 pcs.)
Productinformation DED
System DED
Tool holder with screw for clamping
Perfect for special applications
12/19/2019
7
Productinformation DED
System DED – Typ 208
Tool holder with screw for clamping
Shank 16 x 16 and 20 x 20;
Productinformation DED
System DED – Typ 619
Tool holder with screw for clamping for face grooving
Shank 16 x 16 and 20 x 20; only in right hand versionavailable
12/19/2019
8
Productinformation DED
System DED – insert for face grooving
For tool holder type 619
Coating AL41F
Productinformation DED
System DED – Insert for Poly-V-profiles
Clamping with claw
Coating AL41F
12/19/2019
9
Productinformation Broaching
Broaching
Broaching on turning and milling machines
Complement – Optimisation - Extension
Productinformation Broaching
Broaching – Complement Toleranceclass D9
New: Tolerance D9
For all systems from NPU up to NPV
12/19/2019
10
Productinformation Broaching
Broaching – Extension overhang length (L2)
NHV.15.IK25.4 ømin=15 L2=75
NHV.22.0025.3 ømin=22 L2=105
NHV.30.0032.4 ømin=30 L2=150
NHV.38.0032.4 ømin=38 L2=165
NHV.45.0040.5 ømin=45 L2=205
Productinformation Broaching
Broaching – Extension hexagon socket / square bore
Tool holder including internal cooling – not interchangeable
Hexagon socket SW 13-20 and SW 20-32
Square bore 14 and 20
In AL41F available
12/19/2019
11
Productinformation Broaching
Broaching – Complement tool holder
Tool holder NHV – New with internal cooling
Will be upgraded within the next 12 month
Improvement of the life time about 30%
Extension new system NV10
Productinformation Broaching
Starting from ømin 10.0mm
Length of the tool holder with 22mm / 32mm / 42mm
Including internal cooling
Tolerance class P9 / JS9 / D9 – Coating AL41F
12/19/2019
12
Productinformation Broaching
Broaching – System NV10 - calculation example
5 x NP10.400.02.3/AL41F = 51,15 €/Stk. 255,751 x NH10.0025.1 = 156,90 €/Stk. 156,90
total amount = 412,65
5 x NV10.0401.02/AL41F = 26,, €/Stk. 130,-1 x NHV.10.IK25.3 = 169,80 €/Stk. 169,80
amount = 299,80
Savings by 5 inserts = 112,85 €
Productinformation Broaching
Broaching - Competitors
Paul Horn - Bad repeating accuracy- maximum width in standard =14.0mm
Simtek - Bad seating of the inserts- maximum width in standard =16.0mm
Hoffmann - maximum width in standard =25.0mm- No carbide insertsonly sintered steel with 70 HRC
12/19/2019
13
Z e r s p a n u n g s w e r k z e u g e v o m F e i n s t e n
Good luck with the new products!