PRODUCT ZOOM #13

PRODUCT ZOOMValid from 1 August 2021 to 31 August 2021

#13

2 PRODUCTZOOM#13 GERMAN TOP QUALITY | WWW.WUERTH.MY

CHEMICAL INJECTION MORTAR WIT-PE 1000, 585MLArt No. 5918605586

Suitable Anchoring Reasons

Cracked Concrete Uncracked Concrete REBAR

Long working time for less stress working with:

• Fixings at high temperatures• Great anchoring depths and large diameters (e. g. REBAR)

• For earthquake-proof construction (seismic C1 and C2)• No drill-hole cleaning when using a vacuum drill-bit• 100 years service life instead of the usual 50 years

CONCRETE Cracked & Uncracked

Anchor Rod W-VD-A Anchor Rod W-VI-A

Reinforcement attachment with subsequent mortaring (REBAR)

Anchoring of threaded rods in natural stone (without approval/evaluation)

Standard Threaded Rod (with acceptance test cert 3.1)

Female ThreadAnchor W-VI-IG

WIT-PE 1000THE STRESS-FREE SOLUTION

ALL NEW

3PRODUCTZOOM#13GERMAN TOP QUALITY | WWW.WUERTH.MY

Heavy Steel Structures Subsequent REBAR connections

Pure epoxy mortar with a long processing time, ideal for large anchoring depths and drilling holes as well as high tem-peratures. For compound anchor, concrete and reinforcement attachment with subsequent mortaring (REBAR)

Two-component reactive resin mortar, pure epoxy, styrene-free

Individual attachment in:Cracked and noncracked concreteSeismic performance category C1 (M8 to M30) Seismic performance category C2 (M12 to M24):Anchor rod W-VI-AAnchor rod W-VD-AStandard threaded rod (with acceptance test certificate 3.1)Female thread anchor W-VI-IG

Details/ApplicationFor attachment of: metal structures, metal profiles, wooden structures, brackets, pipes, cable conduits etc.

For structural expansions, ceiling and wall attachments, expansion of load-bearing structures, reinforcement of load-bearing structures, attachment of balconies and canopies, sealing of temporary openings and "forgotten" reinforcing bars

Technical Information

Max. tension load dia.M12 in cracked concrete 30.2 kN

Anchor rod dia. (concrete) Male thread: M8–M30Female thread: M6–M20

Reinforcement bar dia. (REBAR) 8–40 mm

Seismic performance category C1 (M8–M30)C2 (M12–M24)

Drilling process

Hammer drilling ✔

Vacuum drilling ✔

Diamond drilling ✔ (REBAR)

Type of assembly

Pre-positioned installation ✔

Push-through installation ✔

Working time(concrete temp. 20°C,

dry)

30 minutes

Max. service life 100 years


CORDLESS APPLICATION GUN WIT

POINT LINE LASER PLL 18

CORDLESS APPLICATION GUN AKP 18-600 M-CUBE®

• Powerful Li-ion battery-powered application gun for WIT 585ml cartridges• Robust• With 7.4V with 4800mAh Li-ion battery

• Self-levelling point line laser for indoor and outdoor • Highly visible red laser lines and points.• Suitable for making perpendicular lines and separating rooms• Flexible mounting

• Durable metal gearbox and overload protection• Suitable for 400-ml and 600-ml bags. With the pressure plate art.

5700202004 cartridges can also be processed. The conversion set means that the tube can be shortened for improved convenience.

• Automatic decoupling of the push rod• Speed control for the optimum application speed even with highly viscous

media

Art No. 5701000585

Art No. 5709300222

Art No. 5701410000

BATTERY LI-ION18 V BASIC M-CUBE®

CHARGER ALG 18 V M-CUBE ®

Purchase entire set including 1 battery & 1 fast charger

Art No. 0988014237

Scope of delivery• 1 x Cordless application gun• 1 x 7.4V with 4800mAh Li-ion battery• 1 x Battery charger


ECCENTRIC DISC-TYPE SANDER ETS 150-E COMPACT

• Very good handling and easy operation• The vibration level can be set for any application

as required.• Restarting protection• Low vibration work• The 5 mm stroke of the eccentric grinder ensures

high removal during use.• The brushless EC motor gives the machine a long

operating time, resulting in greater efficiency as well as lower maintenance costs.

Art No. 07021240


Nominal voltage 220 V/AC

Frequency 50 Hz

Power input 350 W

Min./max. idle speed 4000-10000 U/min(rpm)

Diameter of sanding plate 150 mm

Oscillating diameter 5 mm

Weight of machine 1.21 kg

Cable length 4 m

MULTI-CUTTER EMS 450 1.7 COMPACT

• Extremely powerful multi-cutter with quick-action clamping system

• Ergonomic working• Anti-vibration system reduces vibration by up to 70%.• Metal gearbox ensures robustness and long life.• Powerful and fast work progress• Quick saw blade replacement

Art No. 57061031


Nominal voltage 230 V/AC

Min./max. frequency 50 / 60 Hz

Power input/output 450 / 250 W

Min./max. idle orbital rate 10000-19500 1/min

Oscillation stroke 3.4 Degree

Weight of machine 1650 g

Cable length 5 m


HOSE CLAMP

• With asymmetrical lock• Material of the clamp band: Ferritic steel F1• Surface of the clamp band: Plain• Material of the screw: Steel• Surface of the screw: Zinc plated• Material of the housing: Ferritic steel F1• Drive type: H• RoHS-compliant: Yes

Width of

band (mm)

Min./Max. grip range

(mm)Art. No.

7.58 - 12 05398 12 10-16 053910 16

9

8 - 16 053918 16 12 - 22 0539112 22 16 - 27 0539116 27 20 - 32 0539120 32 25 - 40 053912540 30 - 45 053913045 32 - 50 053913250 40 - 60 053914060 70 - 90 053917090

12 80 - 100 0549280100

LEFTHAND TWIST DRILL BITDIN 1897 HSCO TIN HEAD TYPE LN

• Titanium nitride-coated assembly drill for working in steel and stainless steel, tip angle 118°.

• Precise drilling• Self-centering

Dia-meter (mm)

Length (mm)

Chip flute

length (mm)

Art. No.

3.2 52 20 0626920320

4.8 62 26 0626920480

6.4 71 30 0626920640

8.0 80 40 0626920800

8.7 85 41 0626920870

STRAIGHT U-SHAPED

KNIFE BLADE FOR MULTI-CUTTER EMS 450

STRAIGHT WITH STOP ROLLER

• 85.0mm • 40mm • 58mm

Art No. 06965125 Art No. 06965156 Art No. 0696597

FOR REMOVING JAMMED SCREWS


NYLON SANDING FLEECE DISC INNER HOLE RED LINEArt No. 0585380100


Diameter (Ø) 100 mm

Drill hole 16 mm

Grid Size Very coarse

Max. rotation speed 11000 rpm

Material of abrasive medium

Silicon carbide

FLAP DISC FOR STEEL AND STAINLESS STEEL RED LINE

Grid Size D i a m e t e r (mm) Art. No. Price

40

100

0579580504 2.80/pc

60 0579580506 2.80/pc

80 0579580508 2.80/pc

120 0579580501 2.80/pc

DIAMOND CUP WHEEL TURBOArt No. 0668121100


Diameter (Ø) 100 mm

Drill hole 16 mm

Segment height 2.5 mm

Max. rotation speed 15300 rpm

Max. circumferential speed

80 m/s

Grid Size Diameter (mm) Art. No.

40

100

0579580504

60 0579580506

80 0579580508

120 0579580501


DRY SANDING DISC 15-HOLE

• Form: Washer• Diameter: 150 mm• Hole pattern: 15-hole• Adhesive system: Hook and loop• Material of abrasive medium:

Aluminium oxide (electro corundum)

DRY SANDING DISCRED PERFECT®

• Form: Washer• Diameter: 150 mm• Hole pattern: Multiple perforations• Adhesive system: Hook and loop• Material of abrasive medium: Aluminium oxide

Grid Size Art. No.

G40 0577363004

G60 0577363006

G80 0577363008

G100 0577363010

G120 0577363012

G150 0577363015

G180 0577363018

G220 0577363022

G240 0577363024

G320 0577363032

G400 0577363040

G500 0577363050

Grid Size Art. No.

G800 0581353080

G1000 0581353100

G1200 0581353120

G1500 0581353150

G2000 0581353200

G2500 0581353250

CONNECTOR WITH ENERGY ABSORBER & PIPE CARABINERArt No. 0899032014

Y-CONNECTOR

• For attachment on alternating sides• For fast, easy attachment to pipes up to ∅ 59 mm with

large, steel pipe carabiner

• Ideal for façade scaffolding• For fast, easy attachment to pipes and scaffolding up to

max. Ø 59 mm• via a large, steel pipe carabiner

Art No. 0899032015


PROTECT PACKAGE 1

PROTECT PACKAGE 2

HARD HAT SH 2000-S

OR

Choose between Fintan S3 Safety Shoe OR Boots

Art No. 0899200243

No. Content Size Art. No.

1 Safety Goggles CastorFree Size

0899107016

2 Ear Defender A812 0899300361

3 Tigerflex Plus Nitrile Protective Glove 8 - 9 089941101X

4 Eco S3 Safety Shoe 38 - 44 M4180820XX

No. Content Size Art. No.

1 Safety Glasses PremiumFree Size

0899103110

2 Ear Defender A812 0899300361

3 Protective Glove Baseflex 8 - 9 089940150X

4 Fintan S3 Safety Shoe 39, 41 - 45 M4181400XX

5 Fintan S3 Safety Boots 37 - 45 M4222010XX

1

1

2

2

4

4

3

3

5


RUST CONVERTER, 1L

• Environmentally friendly dispersion-based rust converter• Can be painted over• Can be filled• Environmentally friendly, as dispersion-based• Reliably stops the corrosion process and provides an optimised application surface for

additional paint work.• Rust converter penetrates into the rust, reacts with the rust and converts iron oxide into a

stable, insoluble, blue-black, metal-organic complex.

Art No. 0893110

Art No. 0893110400RUST CONVERTER SPRAY, 400ML

• Corrosion protection paint with rust-conversion properties• Stops rust formation• Forms an iron complex that neutralises the rust layer• Ideal for difficult, rust-affected areas• Also protects in cracks and pores due to the high penetration depth• High-quality epoxy primer for reliable protective layer• Can be filled or painted over• Silicon-free and acid-free

ASSEMBLY GLOVE SOFT

• Extremely lightweight and flexible glove with superior dexterity and sensitivity• Gauge: 18• Material of the liner: Polyamide• Material coating: Polyurethane• Standards: EN 388, EN 420• Category: II• Maximum comfort• Breathable thanks to extremely lightweight, micro-porous PU coating• Fits like a second skin

Size Art. No.8 08994007319 0899400732

RUST REMOVER BOLTEX, 300MLArt No. 0893250250

• Intelligent 2-in-1 spray head • Cleaning effect removes rust deposits such as surface rust, encrusted dirt and oil residues• Loosens stubborn, seized screw connections• Loosens rust from the surface

HIGH-TECH RUST REMOVER WITH KENA®

MICROFLUID FORMULA FOR 3X MORE POWER

TOUCH SCREEN SENSITIVE

Created by Nawiconfrom the Noun Project


ZINC SPRAY, 400ML

PUMP SPRAY BOTTLE UNFILLED, 1LBRAKE CLEANER, 20LArt No. 0891503001

Art No. 0893113114

Art No. 0890108716

• For cleaning & degreasing during maintenance & repair work

• Excellent corrosion protection• The metal is actively protected, even with minor damage• Over 100 hours of salt-spray resistance (DIN 50021 SS)• Excellent adhesive properties on bare metal• Excellent spot welding properties

• Refillable empty pump spray bottle for easy application of products from canisters or drums• Break-proof, empty 1 litre container• Easy opening owing to surface feel elements

LONG-TERM PROTECTION AND REPAIR OF METALLIC SURFACES

FAST FLASH-OFF BEHAVIOUR AND

EXCELLENT CLEANING PERFORMANCE

CUTTING AND DRILLING OIL CUT+COOL, 400ML

LIQUID METAL FE 1, 500G

Art No. 0893050004

Art No. 0893449

• High-quality two-component reaction re-sin system that exhibits characteristics similar to those of metal due to its special formula• Does not run which also makes vertical application possible• After hardening, lathing, milling, drilling, filing or cutting possible

• Cools even when sprayed• Protects tools• Welding of small workshop parts to the

cutting edge is prevented• Penetrates the smallest tolerances• Provides sustained protection against

further rusting and corrosion

MULTI CUTTING OIL FOR LIGHT TO MEDIUMMACHINING WORK

FAST-ACTING REPAIR SYSTEM WITHMAGNETIC CHARACTERISTICS


STRUCTURAL ADHESIVE BOND AND SEAL POWER, 300MLArt No. 08932353

• Colour: Black• Elastic with low flexibility• Can be painted over• UV-resistant• Non-corrosive• Approved for use with foodstuffs (NSF)

HEAVY-DUTY, ELASTIC HYBRID STRUCTURALADHESIVE WITH HIGH INITIAL STRENGTH

PLASTIC ADHESIVE REPLAST® EASY FAST, 50ml

CONTACT PROTECTIVE LACQUER, 200ML

CONTACT SPRAY SW, 200ML

Art No. 08935003

Art No. 0890108706

Art No. 089370

• Transparent spray protective lacquer• Prevents and rectifies soft shorts on coils and transformers• Prevents short-circuits in high and low-voltage areas• Provides a glossy and flexible protective film• Insulates and seals• Protects against water, diluted acids, bases and corrosion

• Special spray wash• Cleaner for contacts and electrical components• Removes wood resin residues• Cleans components with heavy soiling• Versatile applications – Does not attack plastics and common materials (electr. parts and elements, circuit boards, relays, power strips)

• Can be used for repairs and structural bonding• Special positive mixer• Optimum mixing with minimum volumes• Low adhesive loss (waste)• Quick to harden• Can be sanded and painted over• Excellent chemical resistance

PERFECT ADHESIVE FOR VIRTUALLYEVERY TYPE OF PLASTIC

CLEANS & PROTECTS ALL TYPES OF ELECTRICAL CONTACTS

ADHERES TO METALS SUCH AS COPPER, BRASS, STEEL, CHROME, ALUMINIUM


FORKLIFT GREASE, 700MLFORKLIFT CLEANER, 700MLArt No. 0890108706 Art No. 0893106700

ESPECIALLY FORMULATED FOR HEAVY-DUTY CLEANING AND DEGREASING OF FORKLIFTS

ESPECIALLY FORMULATED FOR HIGH-QUALITY SYNTHETIC

LUBRICATION OF FORKLIFTS

Scope of delivery• Slotted screwdriver 1.2 x 6.5 mm, 0.6 x 3.5 mm• PH screwdriver 1, 2• 1/4 inch screwdriver Blade length 110 mm• Connector DIN 7427 1/4 inch• 1/2 inch ratchet, 1/4 inch ratchet• 1/2 inch socket wrench insert 10 mm, 11 mm, 12 mm 13 mm, 14

mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 24 mm, 26 mm, 27 mm, 28 mm, 30 mm, 32 mm

• 1/2 inch extension Length 125 mm, 250 mm• 1/2 inch cardan joint• 1/4 inch socket wrench insert 4 mm, 5 mm, 5.5 mm, 6 mm, 7 mm,

8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm• 1/4 inch extension 53 mm, 100 mm• 1/4-inch cardan joint Tip type Outer square

• Combination wrench, short type 8 mm, 9 mm, 10 mm, 11 mm, 12 mm 13 mm, 14 mm, 16 mm, 17 mm, 19 mm, 22 mm

• Water pump pliers DIN ISO 8976• Combination pliers DIN ISO 5746• Single-pole voltage tester• Machinists‘ hammer• RW® bit RW10, RW20, RW25, RW30, RW40• Phillips bit PH1, PH2, PH3• Pozidriv bit PZ1, PZ2, PZ3• TX bit TX10, TX15, TX20, TX25, TX30, TX40• Hexagon socket bit 3 mm, 4 mm, 5 mm, 6 mm• Slotted bit 0.6 x 4.5 mm, 0.8 x 5.5 mm, 1.2 x 6.5 mm• Universal holder, magnetic Length 60 mm

TOOL CASEArt No. 096593 180

93 PCS

ALL NEW


E-SHOP PROMOTIONOnly valid on the Wuerth Online Shop

Promo CodeMCUBE

TOP 3 SET COMBO PACK 18 V Art No. 5701419024

Scope of delivery• 1 x Machine bag with plastic bottom• 1 x Cordless angle grinder AWS 18-125 P COMPACT M-CUBE®

• 1 x Cordless hammer drill ABH 18 COMPACT M-CUBE®

• 1 x Cordless drill driver ABS 18 COMPACT M-CUBE®

• 3 x Battery Li-ion 18 V BASIC M-CUBE®

• 1 x Charger ALG 18 V M-CUBE ®

Scope of delivery• 1.0–10.0 mm, graduation 0.5 mm

Whole package only

RM 1999

TWIST DRILL ASSORTMENT HSS DIN 338 TYPE RN 130°, 19 PCS

Art No. 0624000001

Promo CodeWOW

TAKERM 50 OFFMinimum purchase of RM500 on the online shop


No more waiting. Get your item(s) on the spot at our store today.

FREE GIFTS when you purchase or pick up any of our products from our store.

I WANT IT NOWOVER 3000++ PRODUCTS IN STORE

WazeGoogle Maps

Minimum purchase RM300 Minimum purchase RM600

One bottle for every RM100 spent

POCKET MEASURING TAPE NATURAL HAND CLEANER, 4L

AIR QUICK FRESH ACTIVE, 150ML

Art No. 071464 470 Art No. 0893900000

Art No. 0893764155 (Odourless)Art No. 0893764158 (Fresh)

PRODUCT ZOOM #13

Wuerth Malaysia Sdn BhdLot 35, Jalan Delima 1/3,Subang Hi-Tech Industrial Park,40000 Shah Alam, Selangor.T +60 3 58888 [email protected]

We reserve the right, at any time without prior notice or notice, to make any product changes that we feel necessary. Images may be for illustration purposes only and that might differ in appearance from the delivered goods. All products and items are whilst stock last. We reserve the right for misprints where we assume no liability. The General Terms and Conditions apply.

DOWNLOAD OUR WÜRTH E-SHOP APP NOW!

AVAILABLE ON BOTH APPLE APP STORE AND GOOGLE PLAY STORE

Minimum purchase RM500

Minimum purchase RM1500

Minimum purchase RM 1000

Minimum purchase RM 2500

BATTERY-POWEREDLED HAND-HELD LAMP

WLH 1+1 AC/R

DOUBLE-END RATCHET WRENCHASSORTMENT MINI, 31 PCS

MAGAZINE SCREWDRIVER

Art No. 0827940116

Art No. 096511 310Art No. 061348075

Free item for any purchase of products from this promo with a minimum value

wurthmalaysia

OR

POINTED, FLAT AND SPADE CHISEL MULTIPACK MAXLONGLIFE & SPEED HPP

POINTED, FLAT AND SPADE CHISEL MULTIPACK PLUSLONGLIFE & SPEED HPP

Art No. 0647880002 Art No. 0648880002

Documents

PRODUCT ZOOM #13