39
High performance (Isat) realizde by metal dust core. Low profile:Thickness max.2.4/3.0/4.0/5.0mm Low loss and low resistance Capable of corresponding high frequency (1MHz) Application Molding ChokeInductance Value:2R2=2.2μHMold Categories:W/FThe Material CodeDimensions(unit:mm):6.0x6.0x3.0Material TypeShapes And Dimensions (unit:mm) Unit:mm Series A B C D E F I G H MCW-0624-XXX-N2 6.95±0.35 6.6±0.2 3.0±0.3 2.2±0.2 0~+0.15 1.6±0.3 3.5 3.7 8.4 Regulation of Part number MC - 0630 - 2R2 - N 2 ⑤ ⑥ Product Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards Features Thin type of on-board power supply module for Voltage regulator VRM for server Http://www.hk-hotline.com

Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

High performance (Isat) realizde by metal dust core.

Low profile:Thickness max.2.4/3.0/4.0/5.0mm

Low loss and low resistance

Capable of corresponding high frequency (1MHz)

※ Application

① Molding Choke; ④ Inductance Value:2R2=2.2µH;

② Mold Categories:W/F; ⑤ The Material Code;

③ Dimensions(unit:mm):6.0x6.0x3.0; ⑥ Material Type;

※ Shapes And Dimensions (unit:mm)

Unit:mm

Series A B C D E F I G H

MCW-0624-XXX-N2 6.95±0.35 6.6±0.2 3.0±0.3 2.2±0.2 0~+0.15 1.6±0.3 3.5 3.7 8.4

※ Regulation of Part number

MC - 0630 - 2R2 - N 2

① ② ③ ④ ⑤ ⑥

Product Presentation

DC/DC converters for laptop motherboards/CPU

100% lead (Pb) free meet RoHS standards

※ Features

Thin type of on-board power supply module for

Voltage regulator VRM for server

Http://www.hk-hotline.com

Page 2: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Unit:mm

Series A B C D E F I G H

MCW-0630-XXX-N2 6.95±0.35 6.6±0.2 3.0±0.3 2.8±0.2 0~+0.15 1.6±0.3 3.5 3.7 8.4

MCW-0650-XXX-N2 7.05±0.35 6.6±0.2 3.0±0.3 4.8±0.2 0~+0.15 1.6±0.3 3.5 3.7 8.4

MCF-1030-XXX-N2 11.15±0.35 10.0±0.3 3.0±0.5 2.8±0.2 0~+0.15 2.0±0.5 4.1 5.4 13.6

MCF-1040-XXX-N2 11.15±0.35 10.0±0.33.0±0.5/3.5±0.5

3.8±0.2 0~+0.15 2.0±0.5 4.1 5.4 13.6

MCF-1050-XXX-N2 11.15±0.35 10.0±0.33.0±0.5/3.5±0.5

4.8±0.2 0~+0.15 2.0±0.5 4.1 5.4 13.6

MCF-1350-XXX-N2 13.45±0.35 12.6±0.24.0±0.5/3.0±0.5

4.8±0.2 0~+0.15 2.0±0.5 5.0 8.0 14.5

Product Presentation

Http://www.hk-hotline.com

Page 3: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0624-R10-N2 0.10±20% 1.60 1.85 22.50 60.00

MCW-0624-R20-N2 0.20±20% 2.60 3.20 17.00 33.00

MCW-0624-R22-N2 0.22±20% 2.60 3.20 16.00 33.00

MCW-0624-R33-N2 0.33±20% 3.50 4.10 15.00 24.00

MCW-0624-R47-N2 0.47±20% 4.50 5.10 13.00 21.00

MCW-0624-R56-N2 0.56±20% 5.90 6.50 12.00 17.00

MCW-0624-R82-N2 0.82±20% 8.30 9.50 10.00 14.00

MCW-0624-1R0-N2 1.00±20% 11.20 13.50 9.00 16.00

MCW-0624-1R5-N2 1.50±20% 17.00 20.00 8.00 11.00

MCW-0624-2R2-N2 2.20±20% 23.00 28.00 6.00 9.00

MCW-0624-3R3-N2 3.30±20% 31.00 39.00 5.00 7.00

MCW-0624-4R7-N2 4.70±20% 41.00 50.00 4.00 6.00

MCW-0624-5R6-N2 5.60±20% 51.00 60.00 4.00 6.00

MCW-0624-6R8-N2 6.80±20% 57.00 70.00 4.00 5.00

MCW-0624-8R2-N2 8.20±20% 78.00 86.00 3.50 5.00

MCW-0624-100-N2 10.0±20% 92.00 101.00 3.10 4.00

MCW-0624-150-N2 15.0±20% 145 160.00 2.50 3.30

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0624-XXX-N2 Series

Rdc (mΩ) @25°C L0(uH)Inductance (µH)@(0A)

Part Number

Http://www.hk-hotline.com

Page 4: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0630-R10-N2 0.10±20% 1.50 1.70 32.50 60.00

MCW-0630-R15-N2 0.15±20% 1.90 2.50 30.00 40.00

MCW-0630-R20-N2 0.20±20% 2.40 3.00 21.00 34.00

MCW-0630-R22-N2 0.22±20% 2.50 3.00 21.00 34.00

MCW-0630-R33-N2 0.33±20% 3.00 3.50 21.00 25.00

MCW-0630-R36-N2 0.36±20% 3.30 3.90 19.00 22.00

MCW-0630-R47-N2 0.47±20% 3.50 4.10 18.00 20.00

MCW-0630-R56-N2 0.56±20% 4.25 4.90 15.00 18.00

MCW-0630-R68-N2 0.68±20% 5.00 5.70 14.00 17.00

MCW-0630-R82-N2 0.82±20% 6.00 6.90 12.00 16.00

MCW-0630-1R0-N2 1.00±20% 7.00 7.50 11.00 15.00

MCW-0630-1R2-N2 1.20±20% 8.00 10.50 10.00 12.00

MCW-0630-1R5-N2 1.50±20% 10.60 12.10 9.00 14.00

MCW-0630-1R8-N2 1.80±20% 14.00 16.00 7.50 13.00

MCW-0630-2R2-N2 2.20±20% 15.50 17.50 7.00 10.00

MCW-0630-2R5-N2 2.50±20% 16.00 18.00 6.50 10.00

MCW-0630-3R3-N2 3.30±20% 23.00 26.00 6.00 9.50

MCW-0630-4R7-N2 4.70±20% 34.50 38.00 5.00 6.50

MCW-0630-5R6-N2 5.60±20% 36.00 42.00 5.00 6.25

MCW-0630-6R8-N2 6.80±20% 50.00 54.00 4.50 6.00

MCW-0630-8R2-N2 8.20±20% 58.50 65.00 4.00 6.00

MCW-0630-100-N2 10.0±20% 64.00 68.00 4.00 5.00

MCW-0630-120-N2 12.0±20% 85.00 98.00 3.00 4.50

MCW-0630-150-N2 15.0±20% 98.00 115.00 2.80 3.80

MCW-0630-150A-N2 15.0±20% 106.00 115.00 2.60 3.80

MCW-0630-220-N2 22.0±20% 165.00 189.00 1.50 3.10

MCW-0630-330-N2 33.0±20% 225.00 257.00 1.00 2.90

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0630-XXX-N2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 5: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0650-R13-N2 0.13±20% 1.00 1.20 42.00 48.00

MCW-0650-R22-N2 0.22±20% 1.10 1.30 30.00 35.00

MCW-0650-R36-N2 0.36±20% 2.70 3.10 21.00 25.00

MCW-0650-R40-N2 0.40±20% 3.20 3.50 20.00 23.00

MCW-0650-R47-N2 0.47±20% 3.25 3.75 20.00 21.00

MCW-0650-R56-N2 0.56±20% 3.40 3.60 20.00 18.00

MCW-0650-R68-N2 0.68±20% 3.90 4.20 18.00 16.00

MCW-0650-R82-N2 0.82±20% 4.60 4.90 16.50 17.00

MCW-0650-1R0-N2 1.00±20% 5.60 6.50 12.50 13.00

MCW-0650-1R2-N2 1.20±20% 6.00 7.50 12.00 13.00

MCW-0650-1R5-N2 1.50±20% 8.50 10.00 9.50 12.00

MCW-0650-2R2-N2 2.20±20% 11.20 12.50 9.00 10.00

MCW-0650-3R3-N2 3.30±20% 19.90 20.90 8.50 9.00

MCW-0650-4R7-N2 4.70±20% 26.00 29.00 6.00 8.00

MCW-0650-5R6-N2 5.60±20% 31.50 34.40 6.00 7.00

MCW-0650-6R8-N2 6.80±20% 36.50 41.00 5.50 6.00

MCW-0650-8R2-N2 8.20±20% 40.00 43.00 5.50 5.50

MCW-0650-100-N2 10.0±20% 54.00 60.00 4.50 5.30

MCW-0650-120-N2 12.0±20% 58.00 65.00 4.00 5.00

MCW-0650-150-N2 15.0±20% 78.00 90.00 3.10 4.00

MCW-0650-180-N2 18.0±20% 83.00 105.00 3.00 3.50

MCW-0650-220-N2 22.0±20% 120.00 140.00 2.60 3.50

MCW-0650-330-N2 33.0±20% 165.00 190.00 2.30 3.00

MCW-0650-470-N2 47.0±20% 250.00 290.00 2.00 2.80

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0650-XXX-N2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 6: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1030-R22-N2 0.22±20% 1.07 1.20 30.00 50.00

MCF-1030-R24-N2 0.24±20% 1.10 1.27 30.00 50.00

MCF-1030-R33-N2 0.33±20% 1.30 1.60 23.00 32.00

MCF-1030-R36-N2 0.36±20% 1.30 1.60 23.00 28.00

MCF-1030-R47-N2 0.47±20% 2.10 2.50 23.00 26.00

MCF-1030-R56-N2 0.56±20% 2.40 3.00 22.00 24.00

MCF-1030-R68-N2 0.68±20% 2.90 3.40 21.00 23.00

MCF-1030-1R0-N2 1.00±20% 5.50 6.00 15.00 21.00

MCF-1030-1R5-N2 1.50±20% 6.50 7.50 12.00 18.00

MCF-1030-2R2-N2 2.20±20% 8.00 9.00 11.00 14.00

MCF-1030-3R3-N2 3.30±20% 14.50 16.00 9.00 12.00

MCF-1030-4R7-N2 4.70±20% 20.50 22.50 7.00 10.00

MCF-1030-5R6-N2 5.60±20% 27.00 30.00 6.00 10.00

MCF-1030-6R8-N2 6.80±20% 30.00 35.00 5.50 7.50

MCF-1030-8R2-N2 8.20±20% 35.00 45.00 5.00 7.00

MCF-1030-100-N2 10.0±20% 50.00 55.00 4.50 6.50

MCF-1030-150-N2 15.0±20% 59.00 65.00 4.00 5.00

MCF-1030-220-N2 22.0±20% 90.00 99.00 3.00 4.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCF-1030-XXX-N2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 7: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1040-R22-N2 0.22±20% 0.90 1.00 35.00 50.00

MCF-1040-R36-N2 0.36±20% 1.05 1.20 30.00 50.00

MCF-1040-R39-N2 0.39±20% 1.10 1.20 26.00 45.00

MCF-1040-R45-N2 0.45±20% 1.10 1.30 25.00 42.00

MCF-1040-R47-N2 0.47±20% 1.53 1.68 24.00 40.00

MCF-1040-R56-N2 0.56±20% 1.60 1.80 25.00 33.00

MCF-1040-R68-N2 0.68±20% 2.10 2.40 23.00 30.00

MCF-1040-1R0-N2 1.00±20% 3.00 3.30 18.00 28.00

MCF-1040-1R5-N2 1.50±20% 3.80 4.20 15.00 26.00

MCF-1040-1R8-N2 1.80±20% 5.00 5.80 13.00 15.00

MCF-1040-2R0-N2 2.00±20% 6.00 6.90 12.00 14.00

MCF-1040-2R2-N2 2.20±20% 6.00 7.00 12.00 18.00

MCF-1040-3R3-N2 3.30±20% 10.80 11.80 10.00 16.00

MCF-1040-4R7-N2 4.70±20% 17.00 20.00 8.50 13.00

MCF-1040-5R6-N2 5.60±20% 20.00 23.00 8.00 11.00

MCF-1040-6R8-N2 6.80±20% 22.50 25.00 7.00 10.00

MCF-1040-8R2-N2 8.20±20% 25.00 27.00 6.00 9.00

MCF-1040-100-N2 10.0±20% 27.00 30.00 7.50 8.50

MCF-1040-150-N2 15.0±20% 40.00 45.00 6.25 7.00

MCF-1040-220-N2 22.0±20% 60.00 66.00 5.00 5.50

MCF-1040-330-N2 33.0±20% 85.00 92.00 4.00 4.50

MCF-1040-470-N2 47.0±20% 130.00 145.00 3.30 3.50

MCF-1040-680-N2 68.0±20% 195.00 210.00 2.00 3.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCF-1040-XXX-N2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 8: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1050-6R8-N2 6.8±20% 18.00 20.00 8.00 15.0

MCF-1050-100-N2 10.0±20% 25.00 28.00 6.00 10.0

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1350-R36-N2 0.36±20% 0.77 1.10 41.00 60.00

MCF-1350-R47-N2 0.47±20% 1.00 1.40 35.00 56.00

MCF-1350-1R0-N2 1.00±20% 1.90 2.20 26.00 35.00

MCF-1350-2R2-N2 2.20±20% 4.00 5.00 15.00 25.00

MCF-1350-3R3-N2 3.30±20% 7.50 9.00 12.00 23.00

MCF-1350-4R7-N2 4.70±20% 12.00 14.00 11.00 17.00

MCF-1350-5R6-N2 5.60±20% 13.00 15.00 10.50 15.00

MCF-1350-6R8-N2 6.80±20% 15.00 18.00 10.00 14.00

MCF-1350-8R2-N2 8.20±20% 17.00 20.00 9.00 13.00

MCF-1350-100-N2 10.0±20% 22.00 25.00 8.00 12.00

MCF-1350-470-N2 47.0±20% 100.00 140.00 3.00 5.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

※Note:

※Note:

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

If you require another part number please contact with us.

If you require another part number please contact with us.

MCF-1350-XXX-N2 Series

Product Presentation

MCF-1050-XXX-N2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 9: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

High performance (Isat) realizde by metal dust core.

Low profile:Thickness max.2.4/3.0/3.5/4.0/5.0 mm

Low loss and low resistance

Capable of corresponding high frequency (3MHz)

※ Application

① Molding Choke; ④ Inductance Value:2R2=2.2µH;

② Mold Categories:W/F; ⑤ The Material Code;

③ Dimensions(unit:mm):6.0x6.0x3.0; ⑥ Material Type;

※ Shapes And Dimensions (unit:mm)

Unit:mm

Series A B C D E F I G H

MCW-0624-XXX-S1 7.05±0.35 6.6±0.2 3.0±0.3 2.2±0.2 0~+0.15 1.6±0.3 3.5 3.7 8.4

① ② ③ ④ ⑤ ⑥

MC - 0630 - 2R2 - S 1

DC/DC converters for laptop motherboards/CPU

Thin type of on-board power supply module for

Voltage regulator VRM for server

※ Regulation of Part number

Product Presentation

※ Features

100% lead (Pb) free meet RoHS standards

Http://www.hk-hotline.com

Page 10: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Unit:mm

Series A B C D E F I G H

MCW-0630-XXX-S1 6.95±0.35 6.6±0.2 3.0±0.3 2.8±0.2 0~+0.15 1.6±0.3 3.5 3.7 8.4

MCW-0650-XXX-S1 7.05±0.35 6.6±0.2 3.0±0.3 4.8±0.2 0~+0.15 1.6±0.3 3.5 3.7 8.4

MCF-1040-XXX-S1 11.15±0.35 10.0±0.33.0±0.5/3.5±0.5

3.8±0.2 0~+0.15 2.0±0.5 4.1 5.4 13.6

MCF-1050-XXX-S1 11.15±0.35 10.0±0.33.0±0.5/3.5±0.5

4.8±0.2 0~+0.15 2.0±0.5 4.1 5.4 13.6

MCF-1335-XXX-S1 13.45±0.35 12.6±0.24.0±0.5/3.0±0.5

3.3±0.2 0~+0.15 2.0±0.5 5.0 8.0 14.5

MCF-1350-XXX-S1 13.45±0.35 12.6±0.24.0±0.5/3.0±0.5

4.8±0.2 0~+0.15 2.0±0.5 5.0 8.0 14.5

Product Presentation

Http://www.hk-hotline.com

Page 11: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

1、 MCW-0624-R20-S1 0.20±20% 2.20 2.80 25.00 50.00

1、 MCW-0624-R22-S1 0.22±20% 2.60 3.20 21.00 34.00

1、 MCW-0624-R33-S1 0.33±20% 3.50 4.10 18.00 24.50

1、 MCW-0624-R47-S1 0.47±20% 4.50 5.10 15.00 22.00

1、 MCW-0624-R56-S1 0.56±20% 5.90 6.50 13.00 17.00

1、 MCW-0624-R68-S1 0.68±20% 7.50 8.50 11.00 22.00

1、 MCW-0624-R82-S1 0.82±20% 8.30 9.50 10.00 17.00

1、 MCW-0624-1R0-S1 1.00±20% 11.20 13.50 9.00 16.00

2、 MCW-0624-1R5-S1 1.50±20% 17.00 20.00 9.00 15.00

2、 MCW-0624-2R2-S1 2.20±20% 23.00 28.00 7.00 14.00

2、 MCW-0624-3R3-S1 3.30±20% 31.00 39.00 5.50 13.00

2、 MCW-0624-4R7-S1 4.70±20% 41.00 50.00 5.00 10.00

1、 MCW-0624-5R6-S1 5.60±20% 51.00 60.00 5.00 6.50

1、 MCW-0624-6R8-S1 6.80±20% 57.00 70.00 4.00 7.00

1、 MCW-0624-8R2-S1 8.20±20% 78.00 90.00 3.50 6.00

1、 MCW-0624-100-S1 10.0±20% 92.00 101.00 3.10 5.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat(1、) :DC current (A) that will cause L0 to drop approximately 20%

Isat (2、):DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0624-XXX-S1 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 12: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0630-R10-S1 0.10±20% 1.50 1.70 32.50 60.00

MCW-0630-R15-S1 0.15±20% 1.70 2.00 30.00 60.00

MCW-0630-R20-S1 0.20±20% 2.40 3.00 24.00 41.00

MCW-0630-R22-S1 0.22±20% 2.50 2.80 23.00 40.00

MCW-0630-R25-S1 0.25±20% 3.00 3.50 21.00 39.00

MCW-0630-R33-S1 0.33±20% 3.50 3.90 20.00 30.00

MCW-0630-R47-S1 0.47±20% 4.00 4.20 17.50 26.00

MCW-0630-R56-S1 0.56±20% 4.70 5.00 16.50 25.50

MCW-0630-R68-S1 0.68±20% 5.00 5.50 15.50 25.00

MCW-0630-R75-S1 0.75±20% 5.40 6.20 14.00 24.50

MCW-0630-R82-S1 0.82±20% 6.70 8.00 13.00 24.00

MCW-0630-1R0-S1 1.00±20% 9.00 10.00 11.00 22.00

MCW-0630-1R2-S1 1.20±20% 10.00 12.00 10.00 20.00

MCW-0630-1R5-S1 1.50±20% 14.00 15.00 9.00 18.00

MCW-0630-2R0-S1 1.80±20% 16.00 18.00 8.20 14.00

MCW-0630-2R2-S1 2.20±20% 18.00 20.00 8.00 14.00

MCW-0630-2R5-S1 2.50±20% 20.00 22.00 7.00 14.00

MCW-0630-3R3-S1 3.30±20% 28.00 30.00 6.00 13.50

MCW-0630-4R7-S1 4.70±20% 37.00 40.00 5.50 10.00

MCW-0630-5R6-S1 5.60±20% 39.00 42.00 5.50 9.00

MCW-0630-6R8-S1 6.80±20% 54.00 60.00 4.50 8.00

MCW-0630-8R2-S1 8.20±20% 56.00 62.00 4.00 6.00

MCW-0630-100-S1 10.0±20% 62.00 68.00 4.00 5.50

MCW-0630-120-S1 12.0±20% 85.00 95.00 3.30 5.00

MCW-0630-150-S1 15.0±20% 96.00 110.00 3.00 4.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 20%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0630-XXX-S1 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 13: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0650-R20-S1 0.20±20% 0.90 1.20 32.00 50.0

MCW-0650-R22-S1 0.22±20% 1.20 1.40 30.00 50.0

MCW-0650-R36-S1 0.36±20% 3.00 3.50 16.50 35.0

MCW-0650-R40-S1 0.40±20% 3.40 3.80 16.00 27.0

MCW-0650-R47-S1 0.47±20% 3.50 3.90 15.50 30.0

MCW-0650-R56-S1 0.56±20% 3.70 4.20 15.00 22.0

MCW-0650-R68-S1 0.68±20% 4.10 4.80 14.00 21.0

MCW-0650-R82-S1 0.82±20% 5.00 6.00 13.50 20.0

MCW-0650-1R0-S1 1.00±20% 5.60 6.50 13.00 18.0

MCW-0650-1R2-S1 1.20±20% 6.70 7.50 12.00 13.0

MCW-0650-1R5-S1 1.50±20% 7.50 8.50 10.00 12.0

MCW-0650-2R2-S1 2.20±20% 11.00 13.60 9.00 15.0

MCW-0650-3R3-S1 3.30±20% 19.90 20.90 7.00 13.0

MCW-0650-4R7-S1 4.70±20% 26.00 28.00 6.00 12.0

MCW-0650-5R6-S1 5.60±20% 31.50 34.40 5.50 11.0

MCW-0650-6R8-S1 6.80±20% 40.00 43.00 5.00 10.0

MCW-0650-8R2-S1 8.20±20% 45.00 49.00 4.50 9.0

MCW-0650-100-S1 10.0±20% 54.00 60.00 4.10 8.0

MCW-0650-120-S1 12.0±20% 57.00 65.00 3.90 7.0

MCW-0650-150-S1 15.0±20% 74.00 85.00 3.40 6.0

MCW-0650-180-S1 18.0±20% 81.00 95.00 3.00 5.0

MCW-0650-220-S1 22.0±20% 125.00 140.00 2.60 4.5

MCW-0650-330-S1 33.0±20% 160.00 185.00 2.30 4.0

MCW-0650-470-S1 47.0±20% 250.00 280.00 1.80 3.5

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 25%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0650-XXX-S1 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 14: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1040-R22-S1 0.22±20% 0.90 1.00 35.00 60.00

MCF-1040-R36-S1 0.36±20% 1.05 1.20 30.00 50.00

MCF-1040-R39-S1 0.39±20% 1.10 1.30 30.00 60.00

MCF-1040-R41-S1 0.41±20% 1.10 1.30 30.00 60.00

MCF-1040-R45-S1 0.45±20% 1.10 1.30 29.00 45.00

MCF-1040-R47-S1 0.47±20% 1.60 1.80 26.00 40.00

MCF-1040-R56-S1 0.56±20% 1.60 1.80 26.00 33.00

MCF-1040-R68-S1 0.68±20% 2.40 2.70 22.00 39.00

MCF-1040-R88-S1 0.88±20% 2.70 3.00 20.00 38.00

MCF-1040-1R0-S1 1.00±20% 3.00 3.30 18.00 36.00

MCF-1040-1R5-S1 1.50±20% 3.80 4.20 16.00 33.00

MCF-1040-2R2-S1 2.20±20% 7.00 8.00 12.00 27.00

MCF-1040-3R3-S1 3.30±20% 10.80 11.80 10.00 18.70

MCF-1040-4R7-S1 4.70±20% 15.00 16.50 9.50 17.00

MCF-1040-5R6-S1 5.60±20% 17.00 19.30 9.00 14.00

MCF-1040-6R8-S1 6.80±20% 19.00 23.30 8.50 13.50

MCF-1040-8R2-S1 8.20±20% 20.00 22.50 8.00 12.50

MCF-1040-100-S1 10.0±20% 27.00 30.00 7.50 12.00

MCF-1040-150-S1 15.0±20% 40.00 45.00 6.25 9.00

MCF-1040-220-S1 22.0±20% 64.00 74.00 5.00 7.00

MCF-1040-270-S1 27.0±20% 86.00 100.00 4.00 6.00

MCF-1040-330-S1 33.0±20% 98.00 112.00 3.50 5.00

MCF-1040-470-S1 47.0±20% 145.00 167.00 3.00 4.50

MCF-1040-680-S1 68.0±20% 205.00 240.00 2.00 4.00

MCF-1040-820-S1 82.0±20% 270.00 300.00 1.50 3.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 20%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCF-1040-XXX-S1 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 15: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1050-R33-S1 0.33±20% 0.90 1.00 30.00 42.0

MCF-1050-R36-S1 0.36±20% 0.95 1.10 30.00 40.0

MCF-1050-R56-S1 0.56±20% 1.45 1.60 28.00 38.0

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 20%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCF-1050-XXX-S1 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 16: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1335-R15-S1 0.15±20% 0.70 0.85 39.00 68.00

MCF-1335-R22-S1 0.22±20% 1.10 1.30 38.00 65.00

MCF-1335-R33-S1 0.33±20% 1.30 1.50 36.50 62.00

MCF-1335-R39-S1 0.39±20% 1.30 1.50 34.00 60.00

MCF-1335-R47-S1 0.47±20% 1.70 2.00 32.00 55.00

MCF-1335-R56-S1 0.56±20% 1.80 2.20 29.00 51.00

MCF-1335-R60-S1 0.60±20% 1.80 2.20 29.00 51.00

MCF-1335-R62-S1 0.62±20% 1.80 2.20 29.00 51.00

MCF-1335-R68-S1 0.68±20% 2.30 2.50 28.00 49.00

MCF-1335-R82-S1 0.82±20% 2.60 3.00 25.00 44.00

MCF-1335-1R0-S1 1.00±20% 3.30 3.50 24.00 37.00

MCF-1335-1R5-S1 1.50±20% 5.10 5.50 19.00 35.00

MCF-1335-2R2-S1 2.20±20% 7.20 8.00 16.00 27.00

MCF-1335-3R3-S1 3.30±20% 10.00 12.00 13.00 22.00

MCF-1335-4R7-S1 4.70±20% 16.00 18.00 9.00 20.00

MCF-1335-5R6-S1 5.60±20% 19.00 22.00 8.00 16.00

MCF-1335-6R8-S1 6.80±20% 21.00 25.00 7.00 15.00

MCF-1335-8R2-S1 8.20±20% 25.00 30.00 6.50 14.00

MCF-1335-100-S1 10.0±20% 29.00 35.00 6.00 12.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 20%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

Product Presentation

If you require another part number please contact with us.

※Note:

MCF-1335-XXX-S1 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 17: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1350-R22-S1 0.22±20% 0.60 0.75 42.00 76.00

MCF-1350-R36-S1 0.36±20% 0.77 1.10 41.00 75.00

MCF-1350-R47-S1 0.47±20% 1.10 1.30 38.00 65.00

MCF-1350-R50-S1 0.50±20% 1.20 1.50 36.00 55.00

MCF-1350-R56-S1 0.56±20% 1.20 1.50 36.00 55.00

MCF-1350-R62-S1 0.62±20% 1.50 1.70 34.00 54.00

MCF-1350-R68-S1 0.68±20% 1.50 1.70 34.00 54.00

MCF-1350-R82-S1 0.82±20% 1.80 2.10 31.00 53.00

MCF-1350-1R0-S1 1.00±20% 2.10 2.50 29.00 50.00

MCF-1350-1R2-S1 1.20±20% 2.60 3.20 25.00 45.00

MCF-1350-1R5-S1 1.50±20% 3.40 4.10 23.00 43.00

MCF-1350-2R2-S1 2.20±20% 4.60 5.50 20.00 32.00

MCF-1350-3R3-S1 3.30±20% 7.70 9.20 15.00 30.00

MCF-1350-4R7-S1 4.70±20% 12.80 15.00 12.00 25.00

MCF-1350-5R6-S1 5.60±20% 14.00 16.50 11.50 23.00

MCF-1350-6R8-S1 6.80±20% 15.40 18.50 11.00 21.00

MCF-1350-8R2-S1 8.20±20% 19.00 22.00 9.50 18.00

MCF-1350-100-S1 10.0±20% 22.00 25.00 8.00 15.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 20%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

Product Presentation

If you require another part number please contact with us.

※Note:

MCF-1350-XXX-S1 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 18: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

High performance (Isat) realizde by metal dust core.

Low profile:Thickness max.1.2/1.5/1.8/2.0/2.4/3.0 /3.5/4.0/4.5/5.0/6.0/7.0mm

Low loss and low resistance

Capable of corresponding high frequency (1MHz)

※ Application

① Molding Choke; ④ Inductance Value:2R2=2.2µH;

② Mold Categories:W/F; ⑤ The Material Code;

③ Dimensions(unit:mm):6.0x6.0x3.0; ⑥ Material Type;

※ Shapes And Dimensions (unit:mm)

Unit:mm

Series A B C D E F I G H

MCW-0412-XXX-S2 4.4±0.35 4.2±0.25 2.0±0.3 1.0±0.2 0~+0.15 0.8±0.3 2.5 2.2 5.2

MC - 0630 - 2R2 - S 2

① ② ③ ④ ⑤ ⑥

DC/DC converters for laptop motherboards/CPU

Thin type of on-board power supply module for

Voltage regulator VRM for server

※ Regulation of Part number

Product Presentation

※ Features

100% lead (Pb) free meet RoHS standards

Http://www.hk-hotline.com

Page 19: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Unit:mm

Series A B C D E F I G H

MCW-0415-XXX-S2 4.4±0.35 4.2±0.25 2.0±0.3 1.3±0.2 0~+0.15 0.8±0.3 2.5 2.2 5.2

MCW-0420-XXX-S2 4.4±0.35 4.2±0.25 2.0±0.3 1.8±0.2 0~+0.15 0.8±0.3 2.5 2.2 5.2

MCW-0512-XXX-S2 5.4±0.35 5.2±0.2 2.3±0.3 1.0±0.2 0~+0.15 1.0±0.3 2.5 2.2 5.99

MCW-0515-XXX-S2 5.4±0.35 5.2±0.2 2.3±0.3 1.3±0.2 0~+0.15 1.0±0.3 2.5 2.2 5.99

MCW-0518-XXX-S2 5.4±0.35 5.2±0.2 2.3±0.3 1.6±0.2 0~+0.15 1.0±0.3 2.5 2.2 5.99

MCW-0520-XXX-S2 5.4±0.35 5.2±0.2 2.3±0.3 1.8±0.2 0~+0.15 1.0±0.3 2.5 2.2 5.99

MCW-0530-XXX-S2 5.4±0.35 5.2±0.2 2.3±0.3 2.8±0.2 0~+0.15 1.0±0.3 2.5 2.2 5.99

MCW-0612-XXX-S2 7.05±0.35 6.6±0.2 3.0±0.3 1.0±0.2 0~+0.15 1.6±0.3 3.5 3.7 8.4

MCW-0615-XXX-S2 7.05±0.35 6.6±0.2 3.0±0.3 1.3±0.2 0~+0.15 1.6±0.3 3.5 3.7 8.4

MCW-0618-XXX-S2 7.05±0.35 6.6±0.2 3.0±0.3 1.6±0.2 0~+0.15 1.6±0.3 3.5 3.7 8.4

MCW-0620-XXX-S2 7.05±0.35 6.6±0.2 3.0±0.3 1.8±0.2 0~+0.15 1.6±0.3 3.5 3.7 8.4

MCW-0624-XXX-S2 7.05±0.35 6.6±0.2 3.0±0.3 2.2±0.2 0~+0.15 1.6±0.3 3.5 3.7 8.4

MCW-0630-XXX-S2 6.95±0.35 6.6±0.2 3.0±0.3 2.8±0.2 0~+0.15 1.6±0.3 3.5 3.7 8.4

MCW-0650-XXX-S2 7.05±0.35 6.6±0.2 3.0±0.3 4.8±0.2 0~+0.15 1.6±0.3 3.5 3.7 8.4

MCF-1030-XXX-S2 11.15±0.35 10.0±0.3 3.5±0.5 2.8±0.2 0~+0.15 2.0±0.5 4.1 5.4 13.6

MCF-1040-XXX-S2 11.15±0.35 10.0±0.33.0±0.5/3.5±0.5

3.8±0.2 0~+0.15 2.0±0.5 4.1 5.4 13.6

MCF-1045-XXX-S2 11.15±0.35 10.0±0.33.0±0.5/3.5±0.5

4.3±0.2 0~+0.15 2.0±0.5 4.1 5.4 13.6

MCF-1050-XXX-S2 11.15±0.35 10.0±0.33.0±0.5/3.5±0.5

4.8±0.2 0~+0.15 2.0±0.5 4.1 5.4 13.6

MCF-1335-XXX-S2 13.45±0.35 12.6±0.24.0±0.5/3.0±0.5

3.3±0.2 0~+0.15 2.0±0.5 5.0 8.0 14.5

MCF-1350-XXX-S2 13.45±0.35 12.6±0.24.0±0.5/3.0±0.5

4.8±0.2 0~+0.15 2.0±0.5 5.0 8.0 14.5

MCF-1360-XXX-S2 13.45±0.35 12.6±0.24.0±0.5/3.0±0.5

5.8±0.2 0~+0.15 2.0±0.5 5.0 8.0 14.5

MCF-1770-XXX-S2 17.15±0.35 17.0±0.3 12±0.3 6.8±0.2 0~+0.30 2.5±0.5 12.8 11.2 18.2

Product Presentation

Http://www.hk-hotline.com

Page 20: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0412-R33-S2 0.33±20% 17.00 19.00 6.50 8.40

MCW-0412-R47-S2 0.47±20% 19.00 21.00 6.00 6.80

MCW-0412-R68-S2 0.68±20% 32.00 36.00 4.50 6.00

MCW-0412-1R0-S2 1.00±20% 43.00 47.00 4.20 5.20

MCW-0412-1R5-S2 1.50±20% 68.00 75.00 3.25 4.00

MCW-0412-2R2-S2 2.20±20% 79.40 83.50 2.75 3.50

MCW-0412-4R7-S2 4.70±20% 175.00 195.00 1.80 2.80

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat:DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0415-R22-S2 0.22±20% 7.80 9.00 7.00 14.00

MCW-0415-1R5-S2 1.5±20% 49.00 63.00 4.00 6.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat:DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

If you require another part number please contact with us.

MCW-0415-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

※Note:

Product Presentation

MCW-0412-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 21: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0420-R10-S2 0.10±20% 3.50 4.00 12.00 30.00

MCW-0420-R22-S2 0.22±20% 6.00 6.60 9.00 12.50

MCW-0420-R47-S2 0.47±20% 12.50 14.00 7.00 10.50

MCW-0420-R56-S2 0.56±20% 14.00 16.00 6.50 10.00

MCW-0420-R68-S2 0.68±20% 16.00 18.00 6.00 9.00

MCW-0420-1R0-S2 1.00±20% 24.00 27.00 4.50 7.00

MCW-0420-1R2-S2 1.20±20% 24.00 27.00 4.50 7.00

MCW-0420-1R5-S2 1.50±20% 38.00 46.00 4.00 6.00

MCW-0420-2R2-S2 2.20±20% 52.00 58.00 3.00 5.00

MCW-0420-3R3-S2 3.30±20% 74.00 87.00 2.50 4.00

MCW-0420-4R7-S2 4.70±20% 92.00 105.00 2.20 3.00

MCW-0420-6R8-S2 6.80±20% 162.00 178.00 2.00 2.50

MCW-0420-8R2-S2 8.20.±20% 188.00 207.00 1.80 2.00

MCW-0420-100-S2 10.0±20% 256.00 282.00 1.60 1.80

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0420-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 22: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0512-1R0-S2 1.00±20% 32.00 36.80 5.10 7.60

MCW-0512-2R2-S2 2.20±20% 67.00 76.00 3.50 4.00

MCW-0512-3R3-S2 3.30±20% 85.00 98.00 3.00 3.70

MCW-0512-4R7-S2 4.70±20% 145.00 163.00 2.30 3.40

MCW-0512-6R8-S2 6.80±20% 225.00 250.00 2.00 2.30

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0515-R33-S2 0.33±20% 8.00 9.00 10.00 15.00

MCW-0515-1R0-S2 1.00±20% 20.00 23.00 6.50 9.00

MCW-0515-1R2-S2 1.20±20% 29.30 33.70 5.30 8.00

MCW-0515-2R2-S2 2.20±20% 58.00 64.00 3.30 6.00

MCW-0515-3R3-S2 3.30±20% 65.00 72.00 3.20 5.00

MCW-0515-4R7-S2 4.70±20% 95.00 106.00 3.00 4.00

MCW-0515-6R8-S2 6.80±20% 120.00 130.00 2.50 3.20

MCW-0515-100-S2 10.0±20% 153.00 170.00 2.00 3.00

MCW-0515-150-S2 15.0±20% 310.00 350.00 1.00 2.30

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

If you require another part number please contact with us.

MCW-0515-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Product Presentation

MCW-0512-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 23: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0518-R47-S2 0.47±20% 7.70 9.00 10.50 15.50

MCW-0518-R56-S2 0.56±20% 8.00 10.00 9.50 15.00

MCW-0518-R68-S2 0.68±20% 12.00 18.00 8.90 11.20

MCW-0518-1R0-S2 1.00±20% 15.00 17.00 8.00 9.00

MCW-0518-1R2-S2 1.20±20% 17.00 20.00 7.50 8.00

MCW-0518-2R2-S2 2.20±20% 30.00 35.00 5.00 6.50

MCW-0518-3R3-S2 3.30±20% 52.00 58.00 4.50 5.00

MCW-0518-4R7-S2 4.70±20% 78.00 85.00 3.50 4.00

MCW-0518-6R8-S2 6.80±20% 107.00 120.00 2.80 3.40

MCW-0518-8R2-S2 8.20±20% 131.00 145.00 2.60 3.10

MCW-0518-100-S2 10.0±20% 140.00 155.00 2.50 3.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0518-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 24: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0520-R22-S2 0.22±20% 3.80 4.50 15.00 18.70

MCW-0520-R56-S2 0.56±20% 8.00 10.00 9.50 15.00

MCW-0520-R68-S2 0.68±20% 12.00 18.00 8.90 11.20

MCW-0520-1R0-S2 1.00±20% 15.00 17.00 8.00 9.00

MCW-0520-1R5-S2 1.50±20% 25.00 30.00 5.50 8.00

MCW-0520-2R2-S2 2.20±20% 30.00 34.00 4.20 7.00

MCW-0520-3R3-S2 3.30±20% 52.00 58.00 4.50 5.00

MCW-0520-4R7-S2 4.70±20% 70.00 78.00 2.80 3.50

MCW-0520-6R8-S2 6.80±20% 107.00 120.00 2.80 3.40

MCW-0520-8R2-S2 8.20±20% 131.00 145.00 2.60 3.10

MCW-0520-100-S2 10.0±20% 140.00 155.00 2.50 3.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0520-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 25: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0530-R47-S2 0.47±20% 6.50 7.50 12.00 15.00

MCW-0530-R68-S2 0.68±20% 11.00 12.00 8.50 14.00

MCW-0530-R75-S2 0.75±20% 12.00 13.00 8.00 12.00

MCW-0530-1R0-S2 1.00±20% 13.00 14.00 7.00 11.00

MCW-0530-1R2-S2 1.20±20% 15.00 16.00 6.50 11.00

MCW-0530-1R5-S2 1.50±20% 17.00 22.00 6.00 9.50

MCW-0530-2R2-S2 2.20±20% 27.00 33.00 5.50 9.00

MCW-0530-3R3-S2 3.30±20% 32.00 38.00 5.00 6.50

MCW-0530-4R7-S2 4.70±20% 50.00 60.00 4.00 5.00

MCW-0530-5R6-S2 4.70±20% 55.00 63.00 3.80 4.50

MCW-0530-6R8-S2 6.80±20% 69.00 76.00 3.50 4.30

MCW-0530-8R2-S2 8.20±20% 80.00 105.00 3.25 4.00

MCW-0530-100-S2 10.0±20% 115.00 130.00 2.70 3.50

MCW-0530-150-S2 15.0±20% 150.00 165.00 1.80 2.20

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0530-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 26: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0612-R56-S2 0.56±20% 13.50 15.50 7.00 11.00

MCW-0612-R68-S2 0.68±20% 15.00 17.50 6.70 9.00

MCW-0612-R82-S2 0.82±20% 21.50 24.50 6.30 8.00

MCW-0612-1R0-S2 1.00±20% 25.00 29.00 6.00 7.50

MCW-0612-2R2-S2 2.20±20% 51.50 59.00 4.00 5.00

MCW-0612-3R3-S2 3.30±20% 80.00 92.00 3.00 4.00

MCW-0612-4R7-S2 4.70±20% 106.00 122.00 2.70 3.50

MCW-0612-6R8-S2 6.80±20% 185.00 210.00 2.20 2.80

MCW-0612-100-S2 10.0±20% 250.00 290.00 2.00 2.20

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0612-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 27: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0615-R33-S2 0.33±20% 6.80 7.80 10.00 19.50

MCW-0615-R47-S2 0.47±20% 7.30 8.50 9.80 16.00

MCW-0615-R56-S2 0.56±20% 9.50 11.00 9.00 14.00

MCW-0615-R68-S2 0.68±20% 10.50 12.00 8.50 12.00

MCW-0615-R82-S2 0.82±20% 15.00 17.00 7.00 10.00

MCW-0615-1R0-S2 1.00±20% 18.50 21.00 5.50 9.00

MCW-0615-1R2-S2 1.20±20% 25.00 30.00 5.40 8.50

MCW-0615-2R2-S2 2.20±20% 46.00 54.00 3.50 6.00

MCW-0615-3R3-S2 3.30±20% 54.00 63.00 3.30 5.50

MCW-0615-4R7-S2 4.70±20% 76.00 85.00 3.20 5.00

MCW-0615-6R8-S2 6.80±20% 125.00 135.00 2.50 4.00

MCW-0615-100-S2 10.0±20% 165.00 175.00 2.00 3.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0615-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 28: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0618-R10-S2 0.10±20% 6.80 2.50 18.00 45.00

MCW-0618-R22-S2 0.22±20% 4.50 5.20 14.00 29.00

MCW-0618-R33-S2 0.33±20% 5.20 6.80 12.00 22.00

MCW-0618-R47-S2 0.47±20% 7.30 8.40 11.00 18.00

MCW-0618-R68-S2 0.68±20% 10.80 12.70 9.00 17.00

MCW-0618-1R0-S2 1.00±20% 14.50 17.00 7.00 14.00

MCW-0618-1R5-S2 1.50±20% 20.00 26.00 6.50 12.00

MCW-0618-2R0-S2 2.00±20% 28.00 32.00 6.00 13.00

MCW-0618-2R2-S2 2.20±20% 31.00 35.00 6.00 13.00

MCW-0618-3R3-S2 3.30±20% 56.00 60.00 3.50 10.00

MCW-0618-4R7-S2 4.70±20% 68.00 70.00 3.50 5.00

MCW-0618-6R8-S2 6.80±20% 101.00 110.00 2.80 3.50

MCW-0618-8R2-S2 8.20±20% 120.00 135.00 2.50 3.00

MCW-0618-100-S2 10.0±20% 140.00 155.00 2.30 2.50

MCW-0618-150-S2 15.0±20% 215.00 250.00 1.80 2.20

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0618-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 29: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0620-1R0-S2 1.00±20% 9.80 10.80 8.00 12.50

MCW-0620-1R5-S2 1.50±20% 20.00 24.00 6.50 10.50

MCW-0620-2R2-S2 2.20±20% 24.40 27.50 5.50 8.00

MCW-0620-3R3-S2 3.30±20% 40.00 43.00 4.00 7.00

MCW-0620-4R7-S2 4.70±20% 62.00 65.00 3.50 5.50

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0624-R47-S2 0.47±20% 4.5 5.1 14 22

MCW-0624-1R0-S2 1.00±20% 11.20 13.50 9.00 15.00

MCW-0624-3R3-S2 3.30±20% 30.00 36.00 5.50 7.50

MCW-0624-4R7-S2 4.70±20% 40.00 48.00 5.00 6.50

MCW-0624-6R8-S2 6.80±20% 57.00 70.00 3.60 5.50

MCW-0624-100-S2 10.0±20% 88.00 95.00 3.10 4.50

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

If you require another part number please contact with us.

MCW-0624-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Product Presentation

MCW-0620-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 30: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0630-R15-S2 0.15±20% 1.80 2.40 30.00 50.00

MCW-0630-R22-S2 0.22±20% 2.40 2.80 22.00 34.00

MCW-0630-R36-S2 0.36±20% 3.00 3.50 20.00 26.00

MCW-0630-R47-S2 0.47±20% 3.50 4.10 18.00 22.00

MCW-0630-R56-S2 0.56±20% 3.80 4.50 15.00 17.00

MCW-0630-R68-S2 0.68±20% 4.80 5.50 14.00 18.00

MCW-0630-R82-S2 0.82±20% 5.20 7.00 13.00 17.00

MCW-0630-1R0-S2 1.00±20% 6.70 7.40 12.00 16.00

MCW-0630-1R2-S2 1.20±20% 7.00 8.00 12.00 14.00

MCW-0630-1R5-S2 1.50±20% 10.60 12.10 9.00 15.00

MCW-0630-2R2-S2 2.20±20% 14.00 16.00 7.50 11.00

MCW-0630-3R3-S2 3.30±20% 22.00 25.00 6.50 10.00

MCW-0630-4R7-S2 4.70±20% 28.00 32.00 5.50 8.00

MCW-0630-5R6-S2 5.60±20% 33.00 38.00 5.00 7.00

MCW-0630-6R8-S2 6.80±20% 45.00 50.00 4.50 6.50

MCW-0630-8R2-S2 8.20±20% 58.50 65.00 4.00 5.50

MCW-0630-100-S2 10.0±20% 62.00 68.00 4.00 5.00

MCW-0630-120-S2 12.0±20% 85.00 98.00 3.00 5.00

MCW-0630-150-S2 15.0±20% 98.00 115.00 2.50 4.00

MCW-0630-220-S2 22.0±20% 165.00 185.00 2.00 3.60

MCW-0630-330-S2 33.0±20% 225.00 257.00 1.50 3.10

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0630-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 31: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCW-0650-1R0-S2 1.00±20% 6.00 6.50 12.00 14.00

MCW-0650-1R2-S2 1.20±20% 6.00 7.50 11.00 13.00

MCW-0650-1R5-S2 1.50±20% 7.00 8.00 10.00 12.00

MCW-0650-2R2-S2 2.20±20% 10.00 11.50 9.50 10.50

MCW-0650-3R3-S2 3.30±20% 16.00 18.00 8.50 9.50

MCW-0650-4R7-S2 4.70±20% 23.00 26.00 6.50 7.00

MCW-0650-5R6-S2 5.60±20% 26.00 29.00 6.00 7.50

MCW-0650-6R8-S2 6.80±20% 32.00 36.00 5.50 7.00

MCW-0650-8R2-S2 8.20±20% 40.00 43.00 5.50 6.00

MCW-0650-100-S2 10.0±20% 48.00 55.00 4.50 5.50

MCW-0650-150-S2 15.0±20% 72.00 80.00 3.50 4.00

MCW-0650-180-S2 15.0±20% 82.00 98.00 3.10 4.00

MCW-0650-220-S2 22.0±20% 105.00 125.00 2.80 3.50

MCW-0650-330-S2 33.0±20% 180.00 155.00 2.20 3.00

MCW-0650-470-S2 47.0±20% 2500.00 290.00 1.80 2.80

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCW-0650-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 32: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1030-R22-S2 0.22±20% 1.07 1.20 30.00 50.00

MCF-1030-R33-S2 0.33±20% 1.30 1.60 23.00 32.00

MCF-1030-R36-S2 0.36±20% 1.30 1.60 23.00 28.00

MCF-1030-R47-S2 0.47±20% 2.10 2.50 23.00 26.00

MCF-1030-R56-S2 0.56±20% 2.40 3.00 22.00 24.00

MCF-1030-R68-S2 0.68±20% 2.90 3.40 21.00 23.00

MCF-1030-1R0-S2 1.00±20% 5.30 6.00 15.00 21.00

MCF-1030-1R5-S2 1.50±20% 6.50 7.50 12.00 20.00

MCF-1030-2R2-S2 2.20±20% 8.00 9.00 11.00 15.00

MCF-1030-3R3-S2 3.30±20% 14.50 16.00 9.00 13.00

MCF-1030-4R7-S2 4.70±20% 20.50 22.50 7.00 11.00

MCF-1030-5R6-S2 5.60±20% 27.00 30.00 6.00 10.00

MCF-1030-6R8-S2 6.80±20% 30.00 35.00 5.50 9.00

MCF-1030-8R2-S2 8.20±20% 35.00 45.00 5.00 8.50

MCF-1030-100-S2 10.0±20% 50.00 55.00 4.50 7.50

MCF-1030-150-S2 15.0±20% 56.00 62.00 4.00 6.00

MCF-1030-220-S2 22.0±20% 90.00 99.00 3.00 5.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCF-1030-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 33: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1040-R22-S2 0.22±20% 0.85 0.95 35.00 60.00

MCF-1040-R36-S2 0.36±20% 1.05 1.20 30.00 60.00

MCF-1040-R45-S2 0.45±20% 1.10 1.30 25.00 45.00

MCF-1040-R56-S2 0.56±20% 1.60 1.80 25.00 40.00

MCF-1040-R68-S2 0.68±20% 1.80 2.30 24.00 35.00

MCF-1040-R78-S2 0.78±20% 2.00 2.40 22.00 33.00

MCF-1040-1R0-S2 1.00±20% 2.30 2.50 20.00 29.00

MCF-1040-1R5-S2 1.50±20% 3.80 4.20 15.00 27.00

MCF-1040-2R2-S2 2.20±20% 6.50 7.00 12.00 20.00

MCF-1040-3R3-S2 3.30±20% 9.80 10.80 10.50 17.00

MCF-1040-4R7-S2 4.70±20% 13.00 15.00 9.00 15.00

MCF-1040-5R6-S2 5.60±20% 16.00 18.00 8.50 13.00

MCF-1040-6R8-S2 6.80±20% 18.00 21.00 8.00 11.00

MCF-1040-8R2-S2 8.20±20% 22.00 24.00 6.50 10.00

MCF-1040-100-S2 10.0±20% 24.00 27.00 6.00 9.00

MCF-1040-150-S2 15.0±20% 36.00 42.00 7.00 8.00

MCF-1040-180-S2 18.0±20% 40.00 45.00 6.25 7.00

MCF-1040-220-S2 22.0±20% 60.00 66.00 5.00 6.00

MCF-1040-330-S2 33.0±20% 85.00 92.00 4.00 5.00

MCF-1040-470-S2 47.0±20% 136.00 145.00 3.30 4.00

MCF-1040-680-S2 68.0±20% 190.00 205.00 2.30 4.00

MCF-1040-820-S2 82.0±20% 262.00 280.00 2.00 3.50

MCF-1040-101-S2 100.0±20% 280.00 300.00 1.50 3.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCF-1040-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 34: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1045-3R3-S2 3.30±20% 9.00 10.00 11.00 19.00

MCF-1045-101-S2 10.0±20% 278.00 300.00 1.80 2.80

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1050-6R8-S2 6.80±20% 16.50 19.00 8.50 15.00

MCF-1050-100-S2 10.0±20% 23.00 27.00 7.50 11.00

MCF-1050-220-S2 22.0±20% 41.00 46.00 6.00 7.00

MCF-1050-270-S2 27.0±20% 59.00 65.00 5.00 6.50

MCF-1050-330-S2 33.0±20% 63.00 70.00 4.50 6.00

MCF-1050-470-S2 47.0±20% 106.00 115.00 3.50 4.50

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

If you require another part number please contact with us.

MCF-1050-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

※Note:

Product Presentation

MCF-1045-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 35: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1335-R22-S2 0.22±20% 1.00 1.20 38.00 55.00

MCF-1335-R56-S2 0.56±20% 1.70 2.00 29.00 44.00

MCF-1335-R68-S2 0.68±20% 2.00 2.30 28.00 42.00

MCF-1335-R82-S2 0.82±20% 2.50 2.90 25.00 37.00

MCF-1335-1R0-S2 1.00±20% 3.00 3.40 24.00 34.00

MCF-1335-1R2-S2 1.20±20% 3.30 3.80 20.00 27.00

MCF-1335-1R5-S2 1.50±20% 4.10 4.70 18.00 26.00

MCF-1335-2R2-S2 2.20±20% 6.00 6.90 14.00 20.00

MCF-1335-3R3-S2 3.30±20% 8.30 9.50 13.00 16.00

MCF-1335-4R7-S2 4.70±20% 15.00 17.00 9.00 15.00

MCF-1335-5R6-S2 5.60±20% 18.30 19.00 8.00 14.00

MCF-1335-6R8-S2 6.80±20% 19.80 22.00 7.00 13.00

MCF-1335-8R2-S2 8.20±20% 24.80 28.00 6.50 12.00

MCF-1335-100-S2 10.0±20% 26.00 29.00 6.00 10.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCF-1335-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 36: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1350-R36-S2 0.36±20% 0.74 0.85 42.00 60.00

MCF-1350-R47-S2 0.47±20% 0.90 1.30 38.00 60.00

MCF-1350-R50-S2 0.50±20% 1.00 1.15 38.00 50.00

MCF-1350-R56-S2 0.56±20% 1.25 1.35 35.00 48.00

MCF-1350-R68-S2 0.68±20% 1.35 1.55 33.00 46.00

MCF-1350-R82-S2 0.82±20% 1.45 1.67 30.00 39.00

MCF-1350-1R0-S2 1.00±20% 1.90 2.20 26.00 42.00

MCF-1350-1R5-S2 1.50±20% 2.80 3.20 23.00 32.00

MCF-1350-1R8-S2 1.80±20% 2.80 3.20 23.00 27.00

MCF-1350-2R2-S2 2.20±20% 4.00 5.00 15.00 24.00

MCF-1350-3R3-S2 3.30±20% 7.50 8.50 13.00 23.00

MCF-1350-4R7-S2 4.70±20% 10.00 12.00 12.00 22.00

MCF-1350-5R6-S2 5.60±20% 12.00 15.00 11.50 18.00

MCF-1350-6R8-S2 6.80±20% 14.00 17.00 11.00 17.00

MCF-1350-8R2-S2 8.20±20% 16.00 20.00 10.00 15.00

MCF-1350-100-S2 10.0±20% 19.00 22.00 9.00 12.00

MCF-1350-150-S2 15.0±20% 30.00 35.00 6.00 9.00

MCF-1350-220-S2 22.0±20% 51.00 58.00 4.50 6.50

MCF-1350-270-S2 27.0±20% 58.00 66.00 4.00 6.30

MCF-1350-330-S2 33.0±20% 75.00 84.00 3.50 6.00

MCF-1350-470-S2 47.0±20% 116.00 130.00 3.00 5.00

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCF-1350-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 37: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1360-6R8-S2 6.80±20% 10.00 13.80 11.50 15.00

MCF-1360-8R2-S2 8.20±20% 13.60 16.00 11.00 13.50

MCF-1360-100-S2 10.0±20% 18.00 20.70 10.00 12.50

MCF-1360-120-S2 12.0±20% 20.00 23.00 7.00 10.00

MCF-1360-150-S2 15.0±20% 25.00 29.00 6.00 9.00

MCF-1360-180-S2 18.0±20% 30.00 35.00 5.00 8.00

MCF-1360-220-S2 22.0±20% 34.00 39.50 5.00 7.50

MCF-1360-270-S2 27.0±20% 49.00 56.00 4.00 6.50

MCF-1360-330-S2 33.0±20% 65.00 75.00 4.00 6.00

MCF-1360-470-S2 47.0±20% 80.00 90.00 3.50 5.50

MCF-1360-680-S2 68.0±20% 115.00 130.00 3.25 4.50

MCF-1360-820-S2 82.0±20% 120.00 140.00 3.00 4.00

MCF-1360-101-S2 100.0±20% 180.00 200.00 2.50 3.50

MCF-1360-121-S2 120.0±20% 210.00 235.00 2.30 3.20

MCF-1360-151-S2 150.0±20% 300.00 350.00 2.00 2.70

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCF-1360-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 38: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Heat RatingCurrent DC

Amps. Idc (A)

SaturationCurrent DC

Amps. Isat(A)

Typical Maximum Typical Typical

MCF-1770-1R5-S2 1.50±20% 1.85 2.15 40.00 40.00

MCF-1770-2R2-S2 2.20±20% 2.15 2.50 37.00 34.00

MCF-1770-4R7-S2 4.70±20% 4.12 4.72 27.00 24.00

MCF-1770-6R8-S2 6.80±20% 6.55 7.55 20.00 22.00

MCF-1770-8R2-S2 8.20±20% 8.10 8.70 16.00 20.00

MCF-1770-100-S2 10.0±20% 9.30 10.00 14.00 18.00

MCF-1770-150-S2 15.0±20% 14.50 15.00 12.00 13.00

MCF-1770-200-S2 20.0±20% 19.50 21.90 9.70 12.00

MCF-1770-220-S2 22.0±20% 20.50 23.00 9.50 11.00

MCF-1770-330-S2 33.0±20% 35.10 37.00 9.00 10.00

MCF-1770-470-S2 47.0±20% 41.00 47.00 6.80 7.50

MCF-1770-680-S2 68.0±20% 74.00 85.00 5.20 6.50

All test data is reference to 25 ambient.

Test Condition:100KHz,1.0Vrms

Idc: DC current (A) that will cause an approximate T of 40

Isat :DC current (A) that will cause L0 to drop approximately 30%

Operat between temperature range -55 to +125

The part temperature (ambient + temp rise ) should not exceed 125 under the worst case operating conditions.Circuit design, component.

PWB trace size and thickness, airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the

end application.

The rated current as listed is either the saturation current or the heating current depending on which value is lower.

If you require another part number please contact with us.

※Note:

Product Presentation

MCF-1770-XXX-S2 Series

Part Number L0(uH)

Inductance (µH)@(0A)

Rdc (mΩ) @25°C

Http://www.hk-hotline.com

Page 39: Product Presentationyt.vk-dz.com/pdf/htmfyt.pdfProduct Presentation DC/DC converters for laptop motherboards/CPU 100% lead (Pb) free meet RoHS standards ※ Features Thin type of on-board

Item W A0 B0 K0 P F E D0 D1 P0 P2 T Packing Unit

MCW-201610 8.0±0.1 1.8±0.05 2.22±0.05 1.35±0.05 4.0±0.1 3.5±0.1 1.75±0.1 1.5±0.05 1.0±0.05 4.0±0.1 2.0±0.1 0.25±0.05 2000 Pcs

MCW-201612 8.0±0.1 1.8±0.05 2.22±0.05 1.35±0.05 4.0±0.1 3.5±0.1 1.75±0.1 1.5±0.05 1.0±0.05 4.0±0.1 2.0±0.1 0.25±0.05 2000 Pcs

MCW-252010 8.0±0.1 2.35±0.05 2.8±0.05 1.35±0.05 4.0±0.1 3.5±0.1 1.75±0.1 1.5±0.05 1.0±0.05 4.0±0.1 2.0±0.1 0.25±0.05 2000 Pcs

MCW-252012 8.0±0.1 2.35±0.05 2.8±0.05 1.35±0.05 4.0±0.1 3.5±0.1 1.75±0.1 1.5±0.05 1.0±0.05 4.0±0.1 2.0±0.1 0.25±0.05 2000 Pcs

MCW-0412 12.0±0.3 4.35±0.1 4.35±0.1 1.8±0.1 8.0±0.1 5.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 3000 Pcs

MCW-0415 12.0±0.3 4.35±0.1 4.35±0.1 1.8±0.1 8.0±0.1 5.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 3000 Pcs

MCW-0420 12.0±0.3 4.35±0.1 4.35±0.1 2.3±0.1 8.0±0.1 5.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 3000 Pcs

MCW-0512 16.0±0.3 5.4±0.1 5.4±0.1 1.8±0.1 12.0±0.1 7.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 2000 Pcs

MCW-0515 16.0±0.3 5.4±0.1 5.4±0.1 1.8±0.1 12.0±0.1 7.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 2000 Pcs

MCW-0518 16.0±0.3 5.4±0.1 5.4±0.1 2.3±0.1 12.0±0.1 7.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 1800 Pcs

MCW-0520 16.0±0.3 5.4±0.1 5.4±0.1 2.3±0.1 12.0±0.1 7.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 1500 Pcs

MCW-0530 16.0±0.3 5.4±0.1 5.4±0.1 3.3±0.1 12.0±0.1 7.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 1500 Pcs

MCW-0612 16.0±0.3 7.0±0.1 7.0±0.1 1.5±0.1 12.0±0.1 7.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 2000 Pcs

MCW-0615 16.0±0.3 7.0±0.1 7.0±0.1 1.8±0.1 12.0±0.1 7.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 2000 Pcs

MCW-0618 16.0±0.3 7.0±0.1 7.0±0.1 2.1±0.1 12.0±0.1 7.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 1800 Pcs

MCW-0620 16.0±0.3 7.0±0.1 7.0±0.1 2.3±0.1 12.0±0.1 7.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 1500 Pcs

MCW-0624 16.0±0.3 7.0±0.1 7.0±0.1 2.7±0.1 12.0±0.1 7.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 1500 Pcs

MCW-0630 16.0±0.3 7.0±0.1 7.0±0.1 3.3±0.1 12.0±0.1 7.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 1500 Pcs

MCW-0650 16.0±0.3 7.0±0.1 7.0±0.1 5.3±0.1 12.0±0.1 7.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 1000 Pcs

MCF-1030 24.0±0.3 10.5±0.1 10.5±0.1 3.3±0.1 16.0±0.1 11.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 1000 Pcs

MCF-1040 24.0±0.3 10.5±0.1 10.5±0.1 4.3±0.1 16.0±0.1 11.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.35±0.05 800 Pcs

MCF-1045 24.0±0.3 10.5±0.1 10.5±0.1 4.9±0.1 16.0±0.1 11.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.40±0.05 800 Pcs

MCF-1050 24.0±0.3 10.5±0.1 10.5±0.1 5.7±0.1 16.0±0.1 11.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.50±0.05 700 Pcs

MCF-1335 24.0±0.3 13.0±0.1 13.0±0.1 3.8±0.1 16.0±0.1 11.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.50±0.05 800 Pcs

MCF-1350 24.0±0.3 13.0±0.1 13.0±0.1 5.5±0.1 16.0±0.1 11.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.50±0.05 400 Pcs

MCF-1360 24.0±0.3 13.0±0.1 13.0±0.1 6.85±0.1 16.0±0.1 11.5±0.1 1.75±0.1 1.5±0.1 1.5±0.1 4.0±0.1 2.0±0.1 0.50±0.05 400 Pcs

MCF-1770 28.0±0.3 17.5±0.1 17.5±0.1 7.3±0.1 23.0±0.1 13.5±0.1 1.75±0.1 1.5±0.1 2.0±0.1 4.0±0.1 2.0±0.1 0.50±0.05 400 Pcs

These dimensions will do some adiustments needed without prior notice!

The above data will be needed to do some adjustments without prior notice!

100±1.0 13.0±1.0 12.4+2.0/-0.0

330±2.0 100±1.0 13.0±1.0 16.4+2.0/-0.0

Part NO.

MCW-05

MCW-06

※Carrier Tape Dimensions&Packing Unit

MCF-13

100±1.0 13.0±1.0

MCW-04

Dimensions of Reel

8.4+2.0/-0.0

8.4+2.0/-0.0

MCF-17

24.4+2.0/-0.0

28.4+2.0/-0.0

13.0±1.0330±2.0 100±1.0MCF-10

Packaging Specification

330±2.0 100±1.0 13.0±1.0

A B C

330±2.0

13±1.0

D

MCW-2016

MCW-2520

178±2.0

178±2.0

※ Reel Dimensions

60±1.0

60±1.0

13±1.0

16.4+2.0/-0.0

24.4+2.0/-0.0

330±2.0

330±2.0 100±1.0 13.0±1.0

Http://www.hk-hotline.com