2
Packaged space heating and domestic hot water cylinder for use with Ecodan monobloc air source heat pumps Product Information Heating EHPT20X-MHCW FTC5 Packaged Cylinder for Ecodan Monobloc Units The packaged cylinder offers a highly adaptable heating solution for retrofit or new build. Designed specifically by Mitsubishi Electric to integrate with the Ecodan monobloc air source heat pump range. The cylinder provides improved performance and faster heat up times through the use of plate heat exchanger technology. Fast commissioning via an SD card and energy monitoring functions are now included. Key Features Simple graphical control Optional 2-zone energy efficient space heating control Sleek modern design Compatible with Mitsubishi Electric wireless room controllers Pre-plumbed and wired for faster installation Hybrid function, for use with conventional boilers SD card commissioning Cascade function for multiple unit control Energy monitoring as standard Energy Monitoring NOW INCLUDED

Product Information Heating · Cylinder includes:Flow Temperature Controller (FTC5) with Main Controller and Temperature Sensors, Pumps & Valves for Zone 1 and DHW use, Flow Sensor,

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Product Information Heating · Cylinder includes:Flow Temperature Controller (FTC5) with Main Controller and Temperature Sensors, Pumps & Valves for Zone 1 and DHW use, Flow Sensor,

Packaged spaceheating and domestichot water cylinder for use with Ecodanmonobloc air sourceheat pumps

Product Information

Heating EHPT20X-MHCWFTC5 Packaged Cylinder for Ecodan Monobloc Units

The packaged cylinder offers a highly adaptableheating solution for retrofit or new build.Designed specifically by Mitsubishi Electric to integrate with theEcodan monobloc air source heat pump range. The cylinder provides improved performance and faster heat up times through the use of plate heat exchanger technology. Fast commissioning via an SD card and energy monitoring functions are now included.

Key FeaturesSimple graphical controlOptional 2-zone energy efficient space heating controlSleek modern designCompatible with Mitsubishi Electric wireless room controllersPre-plumbed and wired for faster installationHybrid function, for use with conventional boilersSD card commissioningCascade function for multiple unit controlEnergy monitoring as standard

EnergyMonitoring

NOWINCLUDED

Page 2: Product Information Heating · Cylinder includes:Flow Temperature Controller (FTC5) with Main Controller and Temperature Sensors, Pumps & Valves for Zone 1 and DHW use, Flow Sensor,

G1/2

30

83 427

89

3

11

8

680

CPF 15mm

595

10

20

44

9

16

00

16

00

ADvANCED CONTROLLER – WITH ENERgY MONITORINg

DIMENSIONSFront View Right ViewLeft View

G

A

C

D

B

F

E

470.7

510.7

0

67.8

522.3

462.3

402.3

342.3

88.3

0

46

.7

13

6.7

11

4.2

91

.76

9.2

04

2.1

55

2.7

47

0.7

0

DHW outlet connectionCold water inlet connectionSpace heating return connectionSpace heating flow connectionFlow from heat pump connectionReturn to heat pump connectionElectrical cable inlets

22mm/Compression22mm/Compression28mm/Compression28mm/Compression28mm/Compression28mm/Compression

ABCDEFG

Pipe Description Connection Size/TypeLetter

Upper View

Mitsubishi Electric’s fifth generation controller (FTC5) includes intelligent room temperature control as standard. This together with advanced weather compensationensures the system delivers efficient, comfortable heating regardless of the season. FTC5 now also includes energy monitoring showing consumed and produced energy.

Product Information

Heating EHPT20X-MHCWFTC5 Packaged Cylinder for Ecodan Monobloc Units

NOMINAL HOT WATER VOLUME (LITRES)HEAT PUMP COMBINATION HEATER - Large Profile (with PUHZ-W85VHA2)OPERATING AMBIENT TEMPERATURE (°C DB)SOUND PRESSURE LEVEL AT 1M (dBA)WATER DATA

WATER SAFETY DEVICES

DIMENSIONS (mm)

WEIGHT EMPTY / FULL (kg)ELECTRICAL DATA

ErP Rating

Flow Rate (l/min) W50 - W85 - W112 - HW140Primary PumpSanitary Hot Water PumpConnection Size (mm) Heating / DHWPrimary Expansion Vessel (Litres)Charge Pressure (MPa (Bar))Control Thermistor (°C)Pressure Relief Valve (MPa (Bar))Flow Sensor (minimum flow 5L/min)Control Thermistor (°C)Temp and Pressure Relief Valve (°C)/ (MPa (Bar))WidthDepthHeight

Electrical SupplyPhase Fuse Rating - MCB Sizes (A)*1

Electrical SupplyPhaseCapacity (kW)Max Running Current (A)Fuse Rating - MCB Sizes (A)*1

Water Circuit

DHW Cylinder

Control Board -optionally poweredby outdoor unitImmersion Heater

200A

0 ~ +35°C (RH<80%)28

14.3 - 25.8 - 32.1 - 40.1Grundfos UPM2 15 70 - 130

Grundfos UPSO 15-60 130 CIL228 / 22

120.1 (1)1 - 800.3 (3)

Supplied40-70

90 / 0.7 (7)595680

160098 / 307

220-240v, 50HzSingle

10220-240v, 50Hz

Single3

1316

CYLINDER EHPT20X-MHCW

OPTIONAL SIMPLIFIED WIRELESS ROOM THERMOSTAT AND WIRELESS RECEIVER PAR-WT50-E Controller and PAR-WR51-E ReceiverMECHANICAL ZONES DHW and 1 Heating Zone*2

Cylinder includes: Flow Temperature Controller (FTC5) with Main Controller and Temperature Sensors, Pumps & Valves for Zone 1 and DHW use, Flow Sensor, Plate Heat Exchanger, Scale Trap, 3kW Immersion Heater and Expansion Vessel.*1 MCB Sizes BS EN60898-2 & BS EN60947-2 *2 Optional 2 zone accessory pack available

Printed in August 2015 SAP No. 282528

UNITED KINGDOM Mitsubishi Electric Europe Living Environmental Systems DivisionTravellers Lane, Hatfield, Hertfordshire, AL10 8XB, England General Enquiries Telephone: 01707 282880 Fax: 01707 278881IRELAND Mitsubishi Electric Europe Westgate Business Park, Ballymount, Dublin 24, IrelandTelephone: Dublin (01) 419 8800 Fax: Dublin (01) 419 8890 International code: (003531)

Telephone: 01707 282880email: [email protected] web: heating.mitsubishielectric.co.uk

Country of origin: United Kingdom – Japan – Thailand – Malaysia. ©Mitsubishi Electric Europe 2015. Mitsubishi and Mitsubishi Electric are trademarks of Mitsubishi Electric Europe B.V. The company reserves theright to make any variation in technical specification to the equipment described, or to withdraw or replace products without prior notification or public announcement. Mitsubishi Electric is constantly developingand improving its products. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any contract. All goods are supplied subject tothe Company’s General Conditions of Sale, a copy of which is available on request. Third-party product and brand names may be trademarks or registered trademarks of their respective owners.