Product Information Brochure - Slings

Proud Member Since 1984

Product Information

BrochureRigging, Contractors & Industrial Supplies

2

Standard 6 x 19 and 6 x 36 Classification RopeThe 6 x 19 classification of wire ropes includes standard 6 strand, round strand ropes with 16 through 26 wires per strand. The 6 x 36 classification of wire ropes includes standard 6 strand, round strand ropes with 27 through 49 wires per strand. All rope of the same size, grade and core have the same nominal strength and weight per foot. Different constructions within each classification differ in working characteristics. These characteristics must be considered whenever you are selecting a rope for a specific application.

Available in bright or galvanized finish

Classification* Wires per Strand

6 x 7 7 through 15

6 x 19 16 through 26



IWRC (EIPS)

Dia. (in.)

Approx. Weight per

ft. (lbs.)

Breaking Strength (tons)*

Dia. (in.)

Approx. Weight per

ft. (lbs.)

Breaking Strength (tons)*

1/4 0.116 3.4 1-1/8 2.34 655/16 0.18 5.27 1-1/4 2.89 79.93/8 0.26 7.55 1-3/8 3.5 967/16 0.35 10.2 1-1/2 4.16 1141/2 0.46 13.3 1-5/8 4.88 1329/16 0.59 16.8 1-3/4 5.67 1535/8 0.72 20.6 2 7.39 1983/4 1.04 29.4 2-1/4 9.36 2477/8 1.42 39.8 2-3/8 10.4 2741 1.85 51.7 2-1/2 11.6 302

6 x 19 S 6 x 26 WS 6 x 25 FW 6 x 31 WS 6 x 36 WS 6 x 41 WS

Popular Constructions

Actual Rope Construction:1/4–1-1/8: 6x191-1/4–2-1/2: 6x36*Listed for comparison only. Actual operating loads vary.

High Performance Wire Rope Quick Reference

Super 8 - 8-strand overhead crane wire rope has a plastic coated core to increase operating life, and provide for permanent core lubrication. This is a strand compacted rope for increased fatigue life and is swage compacted for increased strength.

Multi - developed for maximum performance on over-head cranes. This rope features a plastic coated core for extended fatigue life performance and permanent core lubrication. Multi is spin resistant to reduce block twisting on overhead cranes.

Power 9 - all steel high strength type for overhead cranes. This rope is compacted to enhance abrasion characteristic and to reduce sheave- and drum wear. Up to 40% strength increase over standard 6-strand constructions.

Ultra - ultra high strength type mainly used as high fatigue resistant rope for engineered cable assemblies. Up to 55% stronger than standard 6-strand constructions. Sensitive to introduced rotation - call before you select this rope for overhead crane applications.

Compac 18 - more flexible than 19x7 due to a larger num-ber of individual wires. Compacted to provide for better drum spooling and less core abrasion. Recommended for Grove, Terex, Century, Link-Belt, and National cranes. NOT to be used with a swivel.

Compac 35 - recommended to be used on tower and European type mobile cranes. Available in left and right hand lay as well as in regular and lang’s lay constructions. Recommended to be used in single line applications. ALLOWED to be used with a swivel.

Hoist - fatigue resistant non-rotating rope. Strand compac-tion increases strength and sheave contact area. Plastic coated core increases fatigue life, prevents premature inner wire breaks and provides for permanent core lubrication. ALLOWED to be used with a swivel.

Construct-6 - high strength 6-strand rope for applica-tions which require a crush resistant rope to be used on multiple layer winding systems. Because construc-tional stretch is near zero it can be used where a ‘pre-stretched’ rope would be required.

* Classifications are the same in 7 and 8 strand wire ropes.

Wire Rope

ContentsWire Rope . . . . . . . . . . . . . . . . . . . . . . . . 2Synthetic vs . Wire Rope Slings . . . . . . . 4Synthetic Slings . . . . . . . . . . . . . . . . . . . 6Wire Rope Slings . . . . . . . . . . . . . . . . . 10Chain Slings . . . . . . . . . . . . . . . . . . . . . 12Hoists . . . . . . . . . . . . . . . . . . . . . . . . . . 13Trolleys . . . . . . . . . . . . . . . . . . . . . . . . . 14Clamps . . . . . . . . . . . . . . . . . . . . . . . . . 15Rigging Hardware . . . . . . . . . . . . . . . . 16Fall Protection . . . . . . . . . . . . . . . . . . . 18

“Be humble, be proud and take care of your team and

they will take care of our customers. Everything else

will take care of itself.”

certifiedslings.com 3

7 x 7 Stainless Steel Aircraft Cable (Type 304)

Diameter (in.)

Approx. Wt. per 1,000 ft. (lbs.)

Breaking Strength (lbs.)

1/16 7.5 4803/32 16 9201/8 28 1,760

Stainless Steel Aircraft CableNot for Aircraft Use

7 x 19 Stainless Steel Aircraft Cable (Type 304)Also Available in Type 316

Diameter (in.)

Approx. Wt. per 1,000 ft. (lbs.)


3/32 17 9201/8 29 1,760

5/32 45 2,4003/16 65 3,7001/4 110 6,400

5/16 173 9,0003/8 243 12,000

Stainless Steel Wire Rope (Type 304)Also Available in Type 316

Diameter (in.)

Approx. Wt. per ft. (lbs.)


7/16 0.35 16,3001/2 0.46 22,8009/16 0.59 28,5005/8 0.72 35,0003/4 1.04 49,600

Clear Vinyl Coated Stainless Aircraft CableNot for Aircraft UseAvailable in PVC and nylon coating. Also available in 7 x 7 construction

*Listed for comparison only. Actual operating loads vary.

Construction Diameter (in.)Coated to

InchesApprox. Wt. per 1,000 ft. (lbs.)

Breaking Strength (lbs.)*

7 x 19

1/8 3/16 36.2 1,7603/16 1/4 77.5 3,7001/4 5/16 123 6,400

5/16 13/32 197 9,0003/8 7/16 270 12,000

Galvanized Aircraft CableNot for Aircraft Use

Construction Diameter (in.)Coated to

InchesApprox. Wt. per 1,000 ft. (lbs.)


7 x 7

1/16 1/8 11.8 4803/32 1/8 18.5 9203/32 3/16 25.8 9201/8 3/16 35.2 1,700

7 x 19

1/8 3/16 36.2 2,0003/16 1/4 77.5 4,2001/4 5/16 123.0 7,000

5/16 13/32 197.0 9,800

Vinyl Aircraft CableNot for Aircraft UseAvailable in clear and colored PVC and nylon coating.


7 x 19 Extra FlexibleDiameter

(in.)Approx. Wt. per 1,000 ft. (lbs.)


3/32 17.4 1,0001/8 29 2,000

5/32 45 2,8003/16 65 4,2007/32 86 5,6001/4 110 7,000

5/16 173 9,8003/8 243 14,000


7 x 7 FlexibleDiameter

(in.)Approx. Wt. per 1,000 ft. (lbs.)


1/16 7.5 4803/32 16 9201/8 28 1,700

5/32 43 2,6003/16 62 3,7001/4 106 6,100


4

755 Ton Concrete Platform

Steam Generator

We are one of the largest manufacturers

of Slingmax® slings in the southeast United States!

Synthetic vs. Wire Rope SlingsGuess which sling requires less effort to rig, has less chance of causing injury, is easiest to transport and store, and costs less to use?

Synthetic Sling - 44 lbs. Wire Rope - 400 lbs.

Twin-Path® Extra Slings with Covermax® and K-Spec® Core Yarn (TPXC) - This is our best synthetic sling. They have been made in capacities up to 600 metric tons (vertical hitch). All Twin-Path® slings can be made with the Check-Fast® inspection system. The safety and inspection features found only in Twin-Path® products were created to overcome shortfalls riggers found in single path round slings.

Twin-Path® Adjustable Bridle Sling (TPXA or TPA) - This tool is an aid to finding the center of gravity. When the load is lifted the ring moves over the COG to balance and level the object.

Fiber Optic Inspection (FO) - All Twin-Path® slings have the Fiber Optic inspection. The condition of the internal core yarn can be inspected by checking the continuity of the fiber optic cable. The fiber optic cable will conduct light using natural, overhead or flashlight sources.

Shackle Pin Pads - The Shackle Pin Pad is the ideal solution for the problem of sharp edges on the pin-side of a shackle. This pad is easy to connect and easy to remove.

CornerMax® Pad - The CornerMax® cut protection device prevents an edge on the load from touching the sling. In fact the edge doesn’t even touch the CornerMax® protector! This protector will handle the most extreme circumstances lifting steel and concrete. CornerMax® Pads are proven, tested—sling protection from Slingmax® for straight 90° edges.

CornerMax® Sleeve - The CornerMax® sleeve is the latest in rigging protection from Slingmax® Rigging Solutions. This sleeve will protect a synthetic sling from cutting on edges that are curved or irregular.

Check-Fast® Inspection System - The Check-Fast® System is designed to improve job-site safety. The Check-Fast® Tag and External Warning Indicator (EWI) on a round sling product provides for a pass/fail inspection of the internal load bearing core yarn. This safety system is available on Twin-Path® slings, High Performance K-Spec® Fiber round slings, and polyester round slings.SparkEater® Synthetic Slings (SE) - When you have a hot environment up to 300°F, use a Sparkeater® to lift the load without marring the surface of the lifted piece. This is the only high performance, high temperature synthetic sling commercially available.

Twin-Path® Two Leg Bridles (TL) - Simply the lightest and strongest synthetic bridles in the world today. These are perfect to replace existing chain and wire rope bridles. This makes the Twin-Path® Two Leg Bridle extremely versatile on the job.

Twin-Path® Eye & Eye Synthetic Sling (EE) - Usually an eye and eye sling is made from a round sling with a sleeve over it to form the eyes at each end. But our TPXCEE is a single-bodied sling with integrated eyes. It can be manufactured using either K-Spec® core yarn or polyester.


Check-Fast® Inspection System Also known as the 3 Fast® SystemThe Check-Fast® System is designed to improve job-site safety. The 3 Fast® Tag and External Warning Indicator (EWI) on a round sling product provides for a pass/fail inspection of the internal load bearing core yarn. Damage to the core yarn from ultraviolet (UV) light degradation, fiber on fiber abrasion, fatigue, and severe overload can be detected. If the sling is mistakenly overloaded beyond rated capacity, the EWI is designed to disappear before the sling fails. The sling inspector now has a GO/NO-GO inspection device rather than relying on a subjective hand-over-hand inspection to make an educated guess if the load bearing core yarns are in good condition. This safety system is available for High Performance K-Spec® Fiber Round Slings or polyester round slings fabricated by authorized Slingmax® Dealers.

Fiber Optic InspectionFor Twin-Path® SlingsTwin-Path® slings have the Fiber Optic inspection system. The condition of the internal core yarn can be inspected just by checking the continuity of the fiber optic cable. If crushing or cutting, heat or chemical damage, has occurred then the damage to the fiber optic cable will destroy its ability to transmit light from one end to the other giving the inspector a reason to remove the sling from service and send it in for repair evaluation. The fiber optic cable will conduct light using natural, overhead or flashlight sources. The inspector simply covers and removes his finger from one end and watches the other end for blinking which indicates that the sling is OK to use for another lift.

NO-GO

EWI MISSING

GO

SEE THE EWI

Twin-Path® Adjustable Bridle

The Twin-Path® Adjustable Bridle Sling is a multi-purpose rigging tool and it’s important that it is used properly. The adjustment ring has a double leg for the heavy side of the load and a single leg on the lighter side.

See the Adjustable Bridle Product Manual for more information.

If the lifting points are an equal distance from the center of gravity then the Twin-Path® Adjustable can be hooked-up with the double or single leg on either lifting point.

If the lifting points are an equal distance on either side of the center of gravity but one is higher, then the double leg should be attached to the higher lifting point.

The Twin-Path® Adjustable Bridle should be used in applications where the double leg horizontal angle is greater than 45°. Always connect above the center of gravity. If connections are made below the center of gravity, then the load may turn when lifted.

If one of the lifting points is closer to the center of gravity, then attach the double leg to this lifting point. It will have the highest weight concentration. If the Twin-Path® Adjustable is attached so that the single leg is nearest the center of gravity, the lift cannot be made.

6

Synthetic SlingsWeb SlingsEye & Eye-FlatType 3 – Sling made with a flat loop eye on each end with loop eye opening on same place as sling body. This type of sling is sometimes called a flat eye and eye, eye and eye, or double eye sling.

Eye & Eye-TwistType 4 – Sling made with both loop eyes formed as in Type 3, except that the loop eyes are turned to form a loop eye which is at a right angle to the plane of the sling body. This type of sling is commonly referred to as a twisted eye sling.

Length

(Bearing Point to Bearing Point)

Length


Width (in)

Rated Capacities (lbs.)Vertical Choker Vertical Basket

One Ply

1 1,600 1,280 3,2002 3,100 2,480 6,2003 4,700 3,760 9,4004 6,200 4,960 12,4005 7,800 6,240 15,6006 9,300 7,440 18,6008 11,750 9,400 23,50010 14,700 11,760 29,40012 17,650 14,120 35,300

Two Ply

1 3,100 2,480 6,2002 6,200 4,960 12,4003 8,800 7,040 17,6004 11,000 8,800 22,0005 13,700 10,960 27,4006 16,500 13,200 33,0008 22,750 18,200 45,50010 28,400 22,720 56,80012 34,100 27,280 68,200

Three Ply

1 4,100 3,300 8,2002 8,300 6,600 16,6003 12,500 10,000 25,0004 16,000 12,800 32,0005 19,200 15,400 38,4006 23,000 18,400 46,0008 30,700 24,500 61,40010 36,800 29,400 73,60012 44,000 35,200 88,000

Four Ply

1 5,500 4,400 11,0002 11,000 8,800 22,0003 16,450 13,160 32,9004 20,400 16,320 40,8005 25,500 20,400 51,0006 30,600 24,480 61,2008 39,700 31,700 79,40010 49,600 39,600 99,20012 59,500 47,600 119,000

Total customer satisfaction is the first priority for everyone at Certified Slings. Our customer’s

success is our passion.

EndlessType 5 – Endless sling, sometimes referred to as a grommet. It is a continuous loop formed by joining the ends of the fabric together with a splice.

Reversed EyeType 6 (RE) – Reversed Eye slings have protective webbing over the entire body and eyes. This extra webbing reinforces the sling and protects it from wear, resulting in an exceptionally strong and rugged sling.Other sizes available upon request.

Width (in)

Rated Capacities (lbs.)Vertical Choker Vertical Basket

One Ply

1 3,200 2,560 6,4002 6,200 4,960 12,4003 9,400 7,520 18,8004 12,400 9,920 24,8005 15,600 12,480 31,2006 18,600 14,880 37,2008 21,150 16,920 42,30010 26,450 21,160 52,90012 31,750 25,400 63,500

Two Ply

1 6,200 4,960 12,4002 12,400 9,920 24,8003 17,600 14,080 35,2004 22,000 17,600 44,0005 27,400 21,920 54,8006 33,000 26,400 66,0008 42,350 33,880 84,70010 52,900 42,320 105,80012 63,500 50,800 127,000

Length



Type 2 – Sling made with a triangle fitting on both ends. It can be used in a vertical or basket hitch only.

Nylon SlingsType 1 – Sling made with a triangle fitting on one end and a slotted triangle choker fitting on the other end. It can be used in a vertical, basket or choker hitch.

Length


Length


Three & Four Ply hardware slings are available upon request.

Width (in)

Rated Capacities (lbs.)

Vertical ChokerVertical Basket

One Ply

1 1,600 1,280 3,2002 3,100 2,480 6,2003 4,700 3,760 9,4004 6,200 4,960 12,4005 7,800 6,240 15,6006 9,300 7,440 18,6008 11,750 9,400 23,50010 14,700 11,760 29,40012 17,650 14,120 35,300

Two Ply

1 3,100 2,480 6,2002 6,200 4,960 12,4003 8,800 7,040 17,6004 11,000 8,800 22,0005 13,700 10,960 27,4006 16,500 13,200 33,0008 22,750 18,200 45,50010 28,400 22,720 56,80012 34,100 27,820 68,200

* Type 2 can not be used in a choker hitch.

Polyester SlingsRound slings are endless in configuration and are constructed from endless yarns of 100% polyester fiber encased in a tough double wall polyester woven tube. Round slings are superior in their ability to conform to the shape of the load and may be used in all three types of hitches.

Color

Endless Round Slings Bridal Slings

Vertical (lbs.)

Choker(lbs.)

Basket(lbs.)

Single Leg Sling 90°

Vertical (lbs.)

Double Leg Sling 60°

(lbs.)Purple 3,000 2,400 6,000 3,000 5,200Green 6,000 4,800 12,000 6,000 10,400Yellow 9,000 7,200 18,000 9,000 15,500

Gray 12,000 9,600 24,000 12,000 20,700Red 14,000 11,200 28,000 14,000 24,200

Brown 17,000 13,600 34,000 17,000 29,300Blue 22,000 17,600 44,000 22,000 38,000

Green 26,000 20,800 52,000 26,000 45,000Green 32,000 25,600 64,000 32,000 55,200Green 50,000 40,000 100,000 50,000 86,200Green 60,000 48,000 120,000 60,000 103,500

Orange 70,000 56,000 140,000 70,000 121,200Orange 80,000 64,000 160,000 80,000 138,500Orange 90,000 72,000 180,000 90,000 155,800

Note: Multiple (two, three & four) leg bridle assemblies are available in round sling and web sling material. Call for sling angles and capacities.

Length

EE - Eye & Eye

EE - An additional jacket of texturized, abrasion resistant material covers the body of the standard sling.

Note: Use prefix (EE or EN) when ordering.

How To Measure Permanently Assembled SlingsBearing Point to Bearing Point

Leng

th

SOS

Leng

th

DO

Length

DOS

Length

EN - Endless

8

Warning: Sling can fail if damaged, misused or overloaded. Inspect before use. Damaged sling shall not be used. Use only if trained. Do not exceed rated capacity. Protect sling from being cut by load edges, corners, protrusions and abrasive surfaces. Avoid exposure to acid, alkali and temperatures over 180°F. DEATH or INJURY can occur from improper use or maintenance.

Mfg. #

Vertical ChokerVertical Basket Basket Hitches

Ap

pro

x. W

eig

ht

(lbs

. per

ft.)

(B

eari

ng-B

eari

ng)

Nom. Body Width (in.)*

90° 60° 45°

TPXCF/TPXC 1000 10,000 8,000 20,000 17,320 14,140 0.40 1.5 – 3TPXCF/TPXC 1500 15,000 12,000 30,000 25,980 21,210 0.45 1.5 – 3TPXCF/TPXC 2000 20,000 16,000 40,000 34,640 28,280 0.51 1.5 – 3TPXCF/TPXC 2500 25,000 20,000 50,000 43,300 35,350 0.57 2.0 – 4TPXCF/TPXC 3000 30,000 24,000 60,000 51,960 42,420 0.71 2.0 – 4TPXCF/TPXC 4000 40,000 32,000 80,000 69,280 56,560 0.83 2.0 – 4TPXCF/TPXC 5000 50,000 40,000 100,000 86,600 70,700 1.14 2.5 – 5TPXCF/TPXC 6000 60,000 48,000 120,000 103,920 84,840 1.27 2.5 – 5TPXCF/TPXC 7000 70,000 56,000 140,000 121,240 98,980 1.39 2.5 – 5TPXCF/TPXC 8500 85,000 68,000 170,000 147,220 120,190 1.65 3.0 – 6TPXCF/TPXC 10000 100,000 80,000 200,000 173,200 141,400 1.84 3.0 – 6TPXCF/TPXC 12500 125,000 100,000 250,000 216,500 176,750 2.35 4.0 – 8TPXCF/TPXC 15000 150,000 120,000 300,000 259,800 212,100 2.66 4.0 – 8TPXCF/TPXC 17500 175,000 140,000 350,000 303,100 247,450 3.14 4.0 – 8TPXCF/TPXC 20000 200,000 160,000 400,000 346,400 282,800 3.45 5.0 – 10TPXCF/TPXC 25000 250,000 200,000 500,000 433,000 353,500 4.07 5.0 – 10TPXCF/TPXC 27500 275,000 220,000 550,000 476,300 388,850 4.61 6.0 – 12TPXCF/TPXC 30000 300,000 240,000 600,000 519,600 424,200 4.92 6.0 – 12TPXCF/TPXC 40000 400,000 320,000 800,000 692,800 565,600 6.54 7.0 – 14TPXCF/TPXC 50000 500,000 400,000 1,000,000 866,000 707,000 8.15 7.0 – 14TPXCF/TPXC 60000 600,000 480,000 1,200,000 1,039,000 848,000 10.20 11.0 – 22

CAPACITIES ARE IN POUNDS (LBS.). METRIC SLINGS AVAILABLE* Dimensions can vary according to the hardware or bearing points the slings are used with.

Minimum is “tapered” width; Maximum is the flat tubing width.

Twin-Path® Synthetic Slings Twin-Path® Extra Sling with CoverMax® and K-Spec® Core YarnTPXC - This is the world’s first truly ergonomic sling with CoverMax® covers for superior abrasion resistance. These are made in sizes up to 600 tons vertical rated capacity. Larger capacity slings are available on special order. These slings have overload indicators, inner red cover, and are used worldwide in place of wire rope slings for heavy lifts. They are approximately 10% of the weight of a steel sling. These products are repairable. The Twin-Path® patented design provides the rigger with two connections between the hook and the load for redundant back-up protection. These slings have less than 1% stretch at rated capacity. If ergonomics, productivity and safety are important, then these slings are the only choice. This is the lightest and strongest sling on the market today with K-Spec® – the longest lasting load bearing core yarn, backed by independent testing.NOTE: Capacities shown include both paths and are for one complete sling. Sling ratings based on fittings of equal or greater capacity. Conforms to ANSI/ASME B30.9 chapter 6, NAVFAC P-307 section 14.7.4.3, and the Cordage Institute Roundsling Standard. This chart is based on a 5:1 Design Factor (DF); but any other DF can be fabricated. Higher capacity slings are available.

Synthetic SlingsCornerMax® PadsEngineered Cut ProtectionCornerMax® pads create a “tunnel” of cut protection–a no-touch zone. Therefore, the edge does not come in contact with the pad or sling thus protecting the sling. Note that the sides of the load must completely support the pads in order to create and maintain the “tunnel”.

Warning: Damaged or misused protection can result in damage or sling failure. Inspect before each use. Inspect for cuts, tears or damage that may prevent protection of the sling. Ensure protection is the correct size and type to protect the sling. Prevent pads and sling from slipping or sliding across load edge. DEATH or INJURY can occur from improper use, maintenance and/or inspection. MAXIMUM LOADING: Do NOT exceed 25,000 lbs. per inch of sling width.

Mfg. #

Sling Width (in.)

CornerMax® Approx.

Width (in.)Approx. Wt. (lbs)

CRNMX02 1 & 2 4 1CRNMX03 3 5 1.25CRNMX04 4 6 1.5CRNMX05 5 8 2CRNMX06 6 8 2CRNMX08 8 10 2.5CRNMX10 10 12 3CRNMX12 12 16 5.5CRNMX14 14 18 6.5

NOTE: All CornerMax® pads are approximately 9 inches in length unless otherwise specified.

Simulatedload edge

We are one of the largest manufacturers

of Slingmax® slings in the Southeast United States!


Synthetic Armor™ PadsAbrasion ProtectionSynthetic Armor™ pads protect slings from abrasion damage which can be caused by contact with rough surfaces such as concrete beams and structures. They are also used to protect finished or painted loads from marring. These pads can be made to fit any length or width sling. They can also be made in long lengths which the customer can cut into suitable sizes on the job. Double or triple thickness provides resistance for the more severe conditions. There is no maximum width and a variety of materials are used to protect slings and to protect loads depending on the degree of abrasion expected in the application.

CornerMax® SleevesEngineered Cut ProtectionThe CornerMax® sleeve is the latest in rigging protection from Slingmax® Rigging Solutions. The CornerMax® sleeve is the ideal solution to protect synthetic slings from cutting when it is not practical to use a CornerMax® pad, whether due to curvature of the load edge or repetitive uses such as unloading steel coils. Independent field and laboratory testing has shown the CornerMax® sleeve to be extremely cut resistant. The CornerMax® sleeve is made with high tech fiber and is proven tough. In some applications the CornerMax® sleeve may be attached to the sling to prevent slippage. The true benefits of this revolutionary material far outweigh the costs and now provide for the use of synthetic slings in applications previously dominated by heavy chain, mesh and wire rope slings.

Warning: Damaged or misused protection can result in damage or sling failure. Inspect before each use. Inspect for cuts, tears or damage that may prevent protection of the sling. Ensure protection is the correct size and type to protect the sling. Prevent sleeve and sling from slipping or sliding across load edge. DEATH or INJURY can occur from improper use, maintenance and/or inspection. MAXIMUM LOADING: Do NOT exceed 25,000 lbs. per inch of sling width.

Twin-Path® Coil Sling• 10 times lighter than conventional steel coil gripper slings.• The Twin-Path® Coil Sling is so light that it is easy to grab and pull the sling.• Will not damage the load.• Repairable as manufacturer can remove a damaged CornerMax® sleeve and sew a

new one to the sling.

Mfg. #

External Sleeve

Width (in.)

Fastened over both legs of

Twin-Path® SlingCRNMXS04 6 Up to TPXC 7,000CRNMXS10 10 Up to TPXC 25,000

NOTE: Wider sleeves are available.

Warning: Can cause damage or failure of sling if misused or damaged. Inspect before each use. Inspect for cuts, tears or damage that may prevent protection of the sling. Be sure wear protection is the correct size and type to protect the sling. DEATH or INJURY can occur from improper use or maintenance.

Shackle Pin PadsThe pin area of a shackle can cause synthetic slings to cut or tear. Placing synthetic slings on the pin should be avoided. Any shackle can have a sharp edge where the threaded pin goes through the shackle ear. If the sling is exposed to this area, it can cut and fail. If you must rig on the pin, protect your sling with a Shackle Pin pad.

• Sized for the model of shackle.• Protects sling along entire pin including ear seams.• Three connection points secure pad to shackle.• Install and uninstall in seconds.

SYNARM–EE “Eye and Eye”

SYNARM–RM “Removable”

SYNARM–SL “Sliding”

10

Wire Rope SlingsWire Rope Sling

Standard Combinations

Note: Proof testing with certification is available for all slings.

Rope Diameter - Inches (Bearing point to bearing point)

Sliding ChokerSling Length - Feet

(Bearing point to bearing point)

Interior Circumference

How to Measure Slings

Bridle Wire Rope SlingsWith Eye Hoist Hooks

ConfigurationRope Dia.

EIPS Capacities (tons) (Angle to Horizontal)

Alloy Oblong Master Link* Eye Hook

(tons)

Minimum Sling

Length**60° 45° 30° Dia.

2-Leg Bridle 1/4 1.1 0.92 0.65 1/2 3/4-A 1'3"3/8 2.5 2 1.4 1/2 1-1/2-A 1'8"1/2 4.4 3.6 2.5 3/4 3-A 2'5/8 6.8 5.5 3.9 1 5-A 2'4"3/4 9.7 7.9 5.6 1 7-A 2'9"7/8 13 11 7.6 1-1/4 11-A 3'3"1 17 14 9.8 1-1/2 11-A 3'6"

1-1/8 21 17 12 1-1/2 15-A 4'1-1/4 26 21 15 1-3/4 15-A 4'6"1-3/8 31 25 18 1-3/4 22-A 5'1-1/2 37 30 21 2 22-A 5'6"1-3/4 49 40 28 2-1/4 30-A 6'6"

2 63 52 37 2-1/2 37-A 8'2-1/4 77 63 44 2-3/4 45-A 8'9"

3-Leg Bridle 1/4 1.7 1.4 0.97 1/2 3/4-A 1'3"3/8 3.7 3 2.2 3/4 1-1/2-A 1'8"1/2 6.6 5.4 3.8 1 3-A 2'5/8 10 8.3 5.9 1-1/4 5-A 2'4"3/4 15 12 8.4 1-1/4 7-A 2'9"7/8 20 16 11 1-1/2 11-A 3'3"1 26 21 15 1-3/4 11-A 3'6"

1-1/8 31 26 18 1-3/4 15-A 4'1-1/4 38 31 22 2 15-A 4'6"1-3/8 46 38 27 2 22-A 5'1-1/2 55 45 32 2-1/4 22-A 5'6"1-3/4 74 60 42 2-3/4 30-A 6'6"

2 95 78 55 3-1/4 37-A 8'2-1/4 116 94 67 3-3/4 45-A 8'9"

4-Leg Bridle 1/4 2.2 1.8 1.3 3/4 3/4A 1'3"3/8 5 4.1 2.9 3/4 1-1/2A 1'8"1/2 8.8 7.1 5.1 1 3-A 2'5/8 14 11 7.8 1-1/4 5-A 2'4"3/4 19 16 11 1-1/2 7-A 2'9"7/8 26 21 15 1-3/4 11-A 3'3"1 34 28 20 2 11-A 3'6"

1-1/8 42 34 24 2 15-A 4'1-1/4 51 42 30 2-1/4 15-A 4'6"1-3/8 62 50 36 (Pear Link) 2-3/4 22-A 5'1-1/2 73 60 42 (Pear Link) 2-3/4 22-A 5'6"1-3/4 98 80 57 (Pear Link) 2-3/4 30-A 6'6"

2 127 104 73 (Pear Link) 3-1/4 37-A 8'

* In some cases, oblong master links are larger in capacity than required, but are sized to accommodate heavy duty thimbles. If thimbles are not required, a smaller master link can sometimes be used.

**Does not include hardware.


Standard Eye & Eye Wire Rope Slings

Rated capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter. Rated capacities based on design factor of 5 to 1.

Horizontal sling angles less than 30° shall not be used.

Rope Dia.

EIPS Capacities (tons)

Eye Hook (tons)

Standard Eye

Dimensions (W" x L")

Thimbled Eye Dimensions

(W" x L")

Min. Eye & Eye Sling

LengthVerticalChoker Hitch

Vertical Basket*

1/4 0.65 0.48 1.3 3/4-A 2 4 7/8 1-5/8 1'6"5/16 1 0.74 2 1-A 2-1/2 5 1-1/16 1-7/8 1'9"3/8 1.4 1.1 2.9 1-1/2-A 3 6 1-1/8 2-1/8 2'7/16 1.9 1.4 3.9 2-A 3-1/2 7 1-1/2 2-3/4 2'3"1/2 2.5 1.9 5.1 3-A 4 8 1-1/2 2-3/4 2'6"9/16 3.2 2.4 6.4 5-A 4-1/2 9 1-1/2 2-3/4 2'9"5/8 3.9 2.9 7.8 5-A 5 10 1-3/4 3-1/4 3'3/4 5.6 4.1 11 7-A 6 12 2 3-3/4 3'6"7/8 7.6 5.6 15 11-A 7 14 2-1/4 4-1/4 4'1 9.8 7.2 20 11-A 8 16 2-1/2 4-1/2 4'6"

1-1/8 12 9.1 24 15-A 9 18 2-7/8 5-1/8 5'1-1/4 15 11 30 15-A 10 20 2-7/8 5-1/8 5'6"1-3/8 18 13 36 22-A 11 22 3-1/2 6-1/4 6'1-1/2 21 16 42 22-A 12 24 3-1/2 6-1/4 7'1-3/4 28 21 57 30-A 14 28 4-1/2 9 8'

2 37 28 73 37-A 16 32 6 12 9'2-1/4 44 35 89 45-A 18 36 7 14 10'2-1/2 54 42 109 60-A 20 40 - - 11'2-3/4 65 51 130 - 22 44 - - 12'

3 77 60 153 - 24 48 - - 13'

*Rated capacities basket hitch based on D/d ratio of 25

Braided Body Wire Rope SlingsSingle Leg

Rope Dia. W

idth

o

f Bo

dy

Th

ickn

ess

of B

od

y

Rated Capacities (tons)*Eye

Slip

Th

ru

Th

imb

le S

T

Hea

vy

Th

imb

le H

T

Ver

tica

l

Ch

oke

r H

itch

Basket Hitch

60°

45°

30° A B

XIP

IRW

C

3/16 1-3/16 1/2 1.6 1.4 3.2 2.7 2.2 1.6 4 8 W-3 1/21/4 1-1/8 11/16 2.9 2.5 5.7 5 4 2.9 5 10 W-4 5/8

5/16 1-3/8 7/8 4.4 3.9 8.9 7.6 6.2 4.4 6 12 W-4 3/43/8 1-11/16 1 6.3 5.5 13 10.9 9 6.3 7 14 W-5 7/87/16 2 1-3/16 8.6 7.5 17 14.9 12.2 8.6 8 16 W-5 11/2 2-1/4 1-5/16 11 9.8 22 19.1 15.6 11 9 18 W-6 1-1/89/16 2-1/2 1-1/2 14 12 28 24.2 19.8 14 10 20 W-6 1-3/85/8 2-13/16 1-11/16 17 15 35 29 24 17 11 22 W-7 1-1/23/4 3-3/8 2 25 22 49 43 35 25 12 24 W-8 1-5/87/8 4 2-5/16 33 29 67 57 46.7 33 14 28 W-9 21 4-1/2 2-11/16 43 38 87 74 60.8 43 16 32 W-10 -

6 Part 6P1Flat Braid

8 Part 8P1Round Braid

Rope Dia. S

ling

D

iam

eter

Rated Capacities (tons)*Eye

Slip

Th

ru

Th

imb

le S

T

Hea

vy

Th

imb

le H

T

Ver

tica

l

Ch

oke

r H

itch

Basket Hitch

60°

45°

30° A B

XIP

IRW

C

3/16 13/16 2.2 1.9 4.3 3.8 3.11 2.2 4 8 W-3 1/21/4 1-1/8 3.8 3.3 7.6 6.6 5.37 3.8 5 10 W-4 3/4

5/16 1-3/8 5.9 5.2 12 10.2 8.34 5.9 6 12 W-5 13/8 1-11/16 8.5 7.4 17 14.7 12 8.5 7 14 W-5 1-1/87/16 2 11 10 23 19 15.5 11 8 16 W-6 1-1/41/2 2-1/4 15 13 30 26 21 15 9 18 W-7 1-3/89/16 2-1/2 19 16 38 33 26.8 19 10 20 W-7 1-1/25/8 2-13/16 23 20 46 40 32.5 23 11 22 W-8 1-3/43/4 3-3/8 33 29 66 57 46.6 33 12 24 W-9 27/8 4 45 39 89 77 63.6 45 14 28 W-10 -1 4-1/2 58 51 116 100 82 58 16 32 W-10 -

*Rated Capacities Basket Hitch based on D/d ratio of 25 times the component rope diameter.

* Rated Capacities Basket Hitch based on D/d ratio of 20 times the component rope diameter. Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter. Rated Capacities based on design factor of 5 to 1. Sling angles of less than 30 degrees shall not be used. All capacities in tons of 2,000 Ibs. All eye and fitting dimensions in inches.

Data taken from ASME 830.9-2000

Data taken from ASME 830.9-2000

12

Crosby® Grade 100 Chain Sling Configurations

Type DescriptionCO Single Chain Sling with Master Link each end

SOS Single Chain Sling with Master Link and Sling HookSOG Single Chain Sling with Master Link and Grab HookSOF Single Chain Sling with Master Link and Foundry HookSSS Single Chain Sling with Sling Hook each endSGS Single Chain Sling with Grab Hook and Sling Hook

ASOS Adjustable Single Chain with Master Link and Sling HookASOF Adjustable Single Chain Sling with Master Link and Foundry HookASOG Adjustable Single Chain Sling with Master Link and Grab HookSOCH Single with 1355 ChokerDOS Double Chain Sling with Master Link and Sling HookDOG Double Chain Sling with Master Link and Grab HookDOF Double Chain Sling with Master Link and Foundry Hook

ADOS Adjustable Double Chain Sling with Master Link and Sling HookADOG Adjustable Double Chain Sling with Master Link and Grab HookDOCH Double with 1355 ChokerTOS Triple Chain Sling with Master Link and Sling HookTOG Triple Chain Sling with Master Link and Grab HookTOF Triple Chain Sling with Master Link and Foundry Hook

TOCH Triple with 1355 ChokerQOS Quadruple Chain Sling with Master Link and Sling HookQOG Quadruple Chain Sling with Master Link and Grab HookQOF Quadruple Chain Sling with Master Link and Foundry Hook

CO SOS SOG SOF SSS SGS ASOS ASOF ASOG SOCH

DOS DOG DOF ADOS ADOG DOCH

TOS TOG TOF TOCH QOS QOG QOF

Chain SlingsCrosby® ELIMINATOR®Standard Industry Chain Sling TerminologyThe Crosby ELIMINATOR® uses standard industry terminology to make changeover to the system easier. Adjustable chain slings utilizing the Crosby ELIMINATOR® fittings retain standard sling abbreviations. Simply adding the letter “E” to the standard sling type means the sling has been assembled with the Crosby Eliminator®. No more confusion or uncertainty over “Style A”, “Style B”, “Style 1” or “Style 2” adjustable slings. These style designations aren’t needed with the Crosby ELIMINATOR® (see below).

The slings shown here are standard assemblies that can be made from “Proof Tested” Crosby components and alloy chain supplied by your authorized Crosby distributor. Assemblies must include chain sling identification tag.

Type Crosby ELIMINATOR® DescriptionESOS ELIMINATOR® Single Chain Sling with Sling HookESOG ELIMINATOR® Single Chain Sling with Grab HookESOL ELIMINATOR® Single Chain with SHUR-LOC® HookESOF ELIMINATOR® Single Chain with Foundry HookEDOS ELIMINATOR® Double Chain Sling with Sling HooksEDOG ELIMINATOR® Double Chain Sling with Grab HooksEDOL ELIMINATOR® Double Chain Sling with SHUR-LOC® HooksEDOF ELIMINATOR® Double Chain Sling with Foundry HooksETOS ELIMINATOR® Triple Chain Sling with Master Link and Sling HooksETOG ELIMINATOR® Triple Chain Sling with Master Link and Grab HooksETOL ELIMINATOR® Triple Chain Sling with Master Link and SHUR-LOC® HooksETOF ELIMINATOR® Triple Chain Sling with Master Link and Foundry HooksEQOS ELIMINATOR® Quad Chain Sling with Master Link and Sling HooksEQOG ELIMINATOR® Quad Chain Sling with Master Link and Grab HooksEQOL ELIMINATOR® Quad Chain Sling with Master Link and SHUR-LOC® Hooks

EQOF ELIMINATOR® Quad Chain Sling with Master Link and Foundry Hooks

EDOG EDOFESOS ESOG ESOL ESOF

EDOS EDOL

EQOFEQOGETOG ETOF

ETOS ETOL EQOS EQOL

Trade Size (in.) Min. Weight per ft. (lbs.) Work Load Limit (lbs.)9/32 0.77 4,3003/8 1.52 8,8001/2 2.79 15,0005/8 3.74 22,6003/4 5.5 35,3007/8 7.4 42,7001 10.1 59,700

How to Order the Proper Chain SlingInclude the following when ordering:

Type of SlingS – Single ChainD – Double ChainT – Triple ChainQ – Quadruple Chain

Adjustable Styles:ASB – Single Style BADB – Double Style B

Type of Master AttachmentO – Oblong LinkP – Pear LinkR – RingS – Sling HookG – Grab HookF – Foundry Hook

Type of End AttachmentO – Oblong LinkP – Pear LinkR – RingS – Sling HookG – Grab HookF – Foundry Hook

How to Select the Proper Chain1. Determine the maximum weight of LOAD.2. From the working load limit chart

above, determine the SIZE of the body chain. Be sure to consider the effect of the angles.

3. Determine the REACH for the selected angle by measuring the distance from the upper bearing surface of the master link to the bearing surface of the lower attachment.

Leng

th

How to Measure(Bearing Point to

Bearing Point)

Grade 100 Alloy ChainCut lengths and full drums available. Call for more details.


CF Hand Chain Hoist1/2 through 5 Ton CapacityKito CF hand chain hoists give you a practical alternative thanks to an economical design using fewer parts for trouble-free service. Outstanding durability is due to a die-cast aluminum body and high-strength, heat-treated main pinion shaft and load gear. Pre-lubricated ball bearings, precision machined gears, and Weston-style load brake make lifting smooth and easy while allowing long service and low maintenance.

HoistsLB Lever Hoist3⁄4, 1, 1-1⁄2, 2, 2-3⁄4, 3, 6, and 9 Ton CapacityThe LB Series of lever hoists offers a low headroom, compact design that is perfect for use in tight quarters. Regarded as the best lever hoist in the industry, our LB is recommended for use in heavy-duty construction work, mining, manufacturing, shipbuilding and day-to-day maintenance and repair.

Cap. (tons) Mfg. #

Std. Lift (ft.)

Pull to Lift Load

(lbs.)*

Load Chain Diameter

(mm) x Chain Fall Lines

Net Weight (lbs.)

Shipping Weight Approx

(lbs.)

Weight for Add'l One Foot of Lift

(lbs.)3/4 LB008 5 54 (36) 5.6 x 1 13 13 0.51 LB010 5 72 (46) 5.6 x 1 13 14 0.5

1-1/2 LB015 5 64 (45) 7.1 x 1 18 18 0.72 LB020 5 59 (42) 8.8 x 1 25 26 1.1

2-3/4 LB028 5 81 (57) 8.8 x 1 25 26 1.13 LB030 5 69 10 x 1 33 35 1.56 LB060 5 72 10 x 2 57 60 3.29 LB090 5 78 10 x 3 88 93 4.7

Standard HandleOptional Load Limit

Warning Handle

Cap

acit

y (t

on

s)

Mfg. # Hea

dro

om

(in

.)

Std. Lift (ft.)

Pull to

Lift Load (lbs.) L

oad

Ch

ain

Dia

met

er

(mm

) x C

hai

n F

all

Lin

es

Net Wt.

(lbs.) Ap

pro

x.S

hip

pin

g W

eig

ht (

lbs.

)

Wei

gh

t fo

r A

dd

itio

nal

O

ne

Fo

ot o

f Lif

t (lb

s.)

1⁄4 LX003 8.1 5 40 3.2x1 3.5 4 0.151⁄2 LX005 9.7 5 62 4.3x1 5.7 6.2 0.25 1⁄4 Ton 1⁄2 Ton

LX Lever Puller1⁄4 and 1⁄2 Ton CapacitiesKito’s LX mini puller is lightweight, compact and built to perform. It fits conveniently in a toolbox and will easily handle pulling and moving jobs in many applications including transportation, construction and plumbing. Available in two capacities to fit all applications. The 1⁄2 Ton capacity is unique to the industry.

Capacity (tons) Mfg. # S

td. L

ift (

ft.)

Pu

ll to

Lif

t Lo

ad (

lbs.

)

Ove

rhau

l Rat

io

Lo

ad C

hai

n D

iam

eter

(m

m) x

Ch

ain

Fal

l L

ines

Net

Wei

gh

t (lb

s.)

Sh

ipp

ing

Wei

gh

t (l

bs.

)

Wei

gh

t fo

r A

dd

'l O

ne

Fo

ot o

f Lif

t (lb

s.)

1/2 CF005 10 60 19 5 x 1 24 26 11 CF010 10 72 31 6.3 x 1 29 31 1.2

1-1/2 CF015 10 84 41 7.1 x 1 40 42 1.42 CF020 10 80 63 6.3 x 2 47 49 1.83 CF030 10 92 81 7.1 x 2 62 66 2.15 CF050 10 92 134 7.1 x 3 82 86 2.9

ED250S ED525DACap. (lbs)

Single Speed S Model #

Dual Speed DS Model #

Dual Adjustable DA Model #

Lifting Speed (ft/min)

S Model

DS & DA

Model125 ED125S ED125DS ED125DA 69 69/13220 ED220S ED220DS ED220DA 43 43/10250 ED250S ED250DS ED250DA 26 26/10350 ED350S ED350DS ED350DA 66 66/13400 ED400S ED400DS ED400DA 26 26/10525 ED525S ED525DS ED525DA 44 44/101050 ED1050S ED1050DS n/a 22 22/6

ED Electric Chain Hoistswith Hook Suspension and Mini TrolleyFeatures a double braking system, compact design, heavy duty motor, high performance friction clutch and heat treated gearing.

DS Model features speed flexibility - low speed adjustable from 0 to 100% of maximum speed by setting screw inside the pendant.

DA Model features in-line hand grip, high/low speeds and removable bottom hook

14

PT Push Trolley and GT Geared TrolleyPush trolley: 1/2 – 10 Ton capacity Geared trolley: 1/2 – 20 Ton capacity

Kito push and geared trolleys help you maneuver easily on your most demanding lifting operations. They feature specially designed contoured wheels that ensure reliable tracking, and their sealed ball bearings avoid maintenance hassles and provide smooth operation.

NER/ER Electric Chain Hoistswith Hook and Lug SuspensionsThese UL® Listed hoists feature easy access suspension, notched hook and latch system, limit switches, extended chain life, high air flow, unique load sheave, friction clutch and load brake, standard count hour meter, mechanically interlocked contactors on single speed models, high strength, corrosion and wear resistant load chain, dual speed VFD, Smart Brake Technology and pendant controls.

Hoists Trolleys

Recognized as Kito’s Distributor of the Year, Certified Slings & Supply offers a full

line of Kito products and replacement parts. Our goal is to deliver the best customer

experience in the industry.

Contact us today. We look forward to helping

you with all of your Kito hoist products, inspections and repairs.

Cap

. (To

ns)

Mfg. # Sta

nd

ard

Lif

t (ft

)

Pu

sh B

utt

on

Co

rd

(ft.

)

Lif

tin

g S

pee

d

(ft/

min

)

Lifting Motor 3 Phase 60 Hz‡ Load

Chain Dia.

(mm) x Chain Fall

Lines

Net Wt. (lbs.)

Ou

tpu

t (H

p) Rated Current

(amps)

@20

8 –

230V

@46

0V

NER ER

Sin

gle

Sp

eed

1/8 (N)ER001H

108.2

55 0.75 3.4 1.7 4.3 x 1 60 621/4 (N)ER003S 36 0.75 3.4 1.7 4.3 x 1 60 621/4 (N)ER003H 53 1.2 4.8 2.5 6.0 x 1 79 821/2 (N)ER005L 15 0.75 3.4 1.7 6.0 x 1 71 791/2 (N)ER005S 29 1.2 4.8 2.5 6.0 x 1 79 821 (N)ER010L 14 1.2 4.8 2.5 7.7 x 1 104 1101 (N)ER010S 28 2.4 8.6 4.2 7.7 x 1 119 119

1-1/2 (N)ER015S 18 2.4 8.6 4.2 10.2 x 1 159 1702 (N)ER020C 7 1.2 4.8 2.5 7.7 x 2 130 1342 (N)ER020L 14 2.4 8.6 4.2 10.2 x 1 161 1742 (N)ER020S 28 4.7 16.4 7.9 10.2 x 1 201 198

2-1/2 (N)ER025S 22 4.7 16.4 7.9 11.2 x 1 227 2253 (N)ER030L 16 4.7 18.3 9.2 12.5 x 1 256 2563 (N)ER030C

9.217 4.7 16.4 7.9 10.2 x 2 234 234

5 (N)ER050L 11 4.7 16.4 7.9 11.2 x 2 289 284

Du

al S

pee

d

1/8 (N)ER001HD

108.2

55/9 0.75 3.6 1.8 4.3 x 1 60 641/4 (N)ER003SD 36/6 0.75 3.6 1.8 4.3 x 1 60 641/4 (N)ER003HD 53/9 1.2 5.1 2.7 6.0 x 1 77 821/2 (N)ER005LD 15/2.5 0.75 3.6 1.8 6.0 x 1 68 791/2 (N)ER005SD 29/5 1.2 5.1 2.7 6.0 x 1 77 821 (N)ER010LD 14/2.5 1.2 5.1 2.7 7.7 x 1 99 1081 (N)ER010SD 28/4.5 2.4 9.1 4.5 7.7 x 1 115 117

1-1/2 (N)ER015SD 18/3 2.4 9.1 4.5 10.2 x 1 159 1722 (N)ER020CD 7/1 1.2 5.1 2.7 7.7 x 2 123 1322 (N)ER020LD 14/2.5 2.4 9.1 4.5 10.2 x 1 161 1742 (N)ER020SD 28/4.5 4.7 17.3 8.3 10.2 x 1 196 203

2-1/2 (N)ER025SD 22/3.5 4.7 17.3 8.3 11.2 x 1 218 2313 (N)ER030LD 17/6 4.7/1.6 19.6/9.4 9.8/4.7 12.5 x 1 300 3003 (N)ER030CD

9.217/3 4.7 17.3 8.3 10.2 x 2 229 238

5 (N)ER050LD 11/2 4.7 17.3 8.3 11.2 x 2 280 293

NER/ER010L(Shown with optional

canvas chain container)

PT Push Trolley(GT Geared Trolley

shown in left column)

Cap

acit

y (t

on

s)

Mfg. # Net

Wei

gh

t (lb

s.)

Sh

ipp

ing

Wt.

(lb

s.)

Min

. Rad

ius

for

Cu

rve

(in

.)

Flange Width Adjustability B (in.)

Standard Option

PT

Pu

sh T

rolle

y

1/2 PTF2005 9 9 13.8 2.28 to 44.01 to 8 or 8.01 to 12

1 PTF2010 15 16 17.7 2.28 to 55.01 to 8 or 8.01 to 12

1-1/2 – 2 PTF2020 29 30 21.73.23 to

6.026.03 to 12

2-1/2 – 3 PTF2030 46 47 25.63.23 to

6.026.03 to 12

5 PTF2050 95 98 78.74.92 to

7.027.03 to 12

8 PT080 212 254 118.15.5 to 8.66

8.67 to 12

10 PT100 212 254 118.15.5 to 8.66

8.67 to 12

GT

Gea

red

Tro

lley

1/2 – 1 GTF2010 24 25 17.7 2.28 to 55.01 to 8 or 8.01 to 12

1-1/2 – 2 GTF2020 37 39 21.73.23 to 6.02

6.03 to 12

2-1/2 – 3 GTF2030 55 57 25.63.23 to 6.03

6.03 to 12

5 GTF2050 104 107 78.74.92 to

7.027.03 to 12

8 GT080 218 260 118.1 5.5 to 8.66 8.67 to 1210 GT100 218 260 118.1 5.5 to 8.66 8.67 to 1215 GT150 534 615 ∞ 5.5 to 8.66 8.67 to 1220 GT200 534 615 ∞ 5.5 to 8.66 8.67 to 12

‡ Although both 208/230 & 460 Volts are shown together, the motors are NOT reconnectable. Speed ratio is 6:1 with adjustability up to 12:1.


Crosby® Horizontal ClampsFor Horizontal Lifting and TransferFeatures: available in capacities of .75 thru 25 metric tons. Wide variety of jaw openings available: 0” to 4”. Welded alloy steel body for strength and smaller size. Forged alloy components, where required. Individually Proof Tested to 2 times the Working Load Limit with certification. Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook. Manufactured by an ISO 9001 facility. All sizes are rfid equipped.

ClampsCrosby® Vertical ClampsUniversal - For Lifting In Any DirectionFeatures: available in capacities of .5 thru 30 metric tons (higher Working Load Limits available upon request). Wide variety of jaw openings available: 0” to 6.13”. Individually Proof Tested to 2 times the Working Load Limit with certification. Company name (IP), logo, Working Load Limit and jaw opening permanently stamped on body. Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty log book. Full 180° turning range for material transfer, turning or moving. Lock open, lock closed ability with latch for pretension on material and then release of material. Optional IP-5000 Stinger assembly available. Allows for easy connection between the clamp and hoist hook. All sizes are rfid equipped.

Available in a variety of styles:• IPU10 - Standard clamp for materials with a surface hardness to 37Rc (345 HB).• IPU10J - Larger jaw opening.• IPU10S - For use with Stainless Steel material.• IPU10H - For use with materials with a surface hardness to 47Rc (450 HB).

IPU10S / IPU10HIPU10

IPHTONZ - use in the lifting and transfer of non-sagging material or of bundles of non-sagging material (in horizontal position). These clamps must be used in pairs or more.

IPHOZ - used for lifting and transferring, in the horizontal position, of thin sheet and other materials that will sag or bend when lifted. These clamps must be used in pairs or more.

Renfroe Vertical Clamps

Model FR Model JPA

Renfroe Beam Clamps

Model BC

• One piece adjustable design• Used for lifting, pulling or as

an anchor point• No tools required for

mounting/removal• Integrated lifting shackle

• Positive Grip left/right threaded adjusting bar

• Designed with maximum safe jaw grip adjustment

• For use at up to 15° from vertical

Girder ClampsFixed Jaw Adjustable Girder Clamps

Crosby® Clamp-Co Beam ClampsCrosby Clamp-Co Beam Clamps provide an efficient method for handling wide flange beam sections and plate girders. When lifting, these beam clamps grip the beam at three points, and when properly balanced and safely guided, the beam can be handled even if the clamp is slightly off center lengthwise.

• Capacities: 5 Tons to 35 Tons.• Eliminates the need for slings, chokers, and spreader bars.• When applied to load, the tongs automatically open and slide

under the flange of the beam.• Center plate and gripping tongs work together - the heavier

the beam, the greater the clamping pressure.• Model “NS” clamps have a recessed base to accept studs welded to

the beam surface.• Individually Proof Tested to 2 times the Working Load Limit with

certification.• Finish - Red Paint• All sizes are RFID equipped.

NOTE: Control the beam at all times. Beams should be gripped as near the center as possible. Snubbing lines at each end must be used to control excessive twisting or swinging, and to guide the beam to its proper place. Each lifting situation may have a specific demand which should be addressed before lifting.

16

Crosby® Grade 100 Alloy Master LinksAlloy Steel - Quenched and Tempered. Individually proof tested to values shown with certification. Proof tested with fixture sized to prevent localized point loading per ASTM A952. Proof test certification shipped with each link. All sizes are drop forged. “Look for the Platinum Color - Crosby Grade 100 Alloy Products.” Engineered Flat for use with S-1325A coupler link.

Crosby® Bolt Type Anchor ShacklesAvailable in capacities from 1/3 to 150 metric tons, grade 6. Working Load Limit and grade “6” permanently shown on every shackle. Forged – Quenched and Tempered, with alloy pins. Shackles 25t and larger are RFID equipped. Approved for use at -40°C (-40°F) to 204°C (400°F). Meets or exceeds all requirements of ASME B30.26. Shackles 85 metric tons and larger are individually proof tested to 2.0 times the working load limit. Shackles 120 metric tons and larger are proof tested, Magnetic Particle Inspected and provided with Serialized Pin and Bow. Look for the Red Pin®…the mark of genuine Crosby quality.

Have A Specific Crosby Product In Mind?

As a full service authorized distributor of Crosby, Certified Slings has access to all

Crosby products and services.

We can help. Call any of our service centers or go to

certifiedslings.com and ask us.

Rigging HardwareCrosby® Forged Wire Rope ClipsEach base has a Product Identification Code (PIC) for material traceability, the name CROSBY or CG, and a size forged into it. Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 1/8" - 7/8" sizes, and 90% for sizes 1" through 3-1/2". The entire clip is galvanized to resist corrosive and rusting action. Sizes 1/8" through 2-1/2" and 3" have forged bases. Clip sizes up through 1-1/2" have rolled threads. Look for the Red-U-Bolt®, your assurance of Genuine Crosby Clips.

Crosby Clips, all sizes 1/4" and larger, meet the performance requirements of Federal Specification FF-C-450 TYPE 1 CLASS 1, except for those provisions required of the contractor.

G-450

Crosby® Fist Grip® Wire Rope ClipsEntire clip is Galvanized to resist corrosive and rusting action. Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 3/16" - 7/8" sizes, and 90% for sizes 1" through 1-1/2". All sizes have forged steel saddles. Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these wire rope clips meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. Assembled with standard heavy hex nuts.

Fist Grip® wire clips meet or exceed the performance requirements of Federal Specification FF-C-450 Type III, Class 1, except for those provisions required of the contractor.

G-429

Crosby® Screw Pin Anchor ShacklesThese screw pin anchor shackles are available in capacities from 1/3 to 55 metric tons. Working Load Limit permanently shown on every shackle. Comes in hot dip galvanized or self colored. Shackles 25t and larger are RFID equipped. Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. Look for the Red Pin®…the mark of genuine Crosby quality.

G-209

G-2130

Crosby® Grade 100 Alloy Master LinksAlloy Steel — Quenched and Tempered. Proof Tested with 60% inside width special fixtures sized to prevent localized point leading per ASME A-952. Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these links meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. Selected sizes designated with “W” in the size column have enlarged inside dimensions to allow additional room for sling hardware and crane hook. Incorporates patented QUIC-CHECK® deformation indicators.

A-342

A-345

A-1342N


Crosby® Alloy Master Link AssemblyAlloy Steel - Quenched and Tempered. Proof tested with fixture sized to prevent localized point loading per ASTM A952. Proof test certification shipped with each link. All sizes are drop forged. “Look for the Platinum Color - Crosby Grade 100 Alloy Products.” Engineered Flat for use with S-1325A coupler link.

A-1345N

Crosby® LOK-A-LOY® 10 Alloy Connecting LinksSuitable for use with both Grade 80 and Grade 100 chain. Individually Proof Tested at 2-1/2 times Working Load Limit with certification. Locking system that provides for simple assembly and disassembly - no special tools needed. 25% stronger than Grade 80. Meets ASTM A-952-96 standards for Grade 100 chain fittings. Forged Alloy Steel - Quenched and Tempered. Fatigue rated.

A-1337

Crosby® Grade 100 Chain FittingsForged Alloy Steel - Quenched and Tempered. Individually Proof Tested with certification. Rated for Grade 100 chain in choker applications. Each hook has a Product Identification Code (PIC) for material traceability, along with the size and the name Crosby & U.S.A. in raised letters. 25% stronger than Grade 80. Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles. “Look for the Platinum Color - Crosby Grade 100 Alloy Products.” For use with S-1325 Chain Coupler Link.

A-1355

Crosby® Grade 100 Chain FittingsDesigned to connect Grade 100 chain fittings produced with “Engineered Flat” to Grade 100 chain. Forged Alloy Steel - Quenched and Tempered. Suitable for use with Grade 100 and Grade 80 chain. Individually Proof Tested to 2-1/2 times the Working Load Limit with certification. Locking system that provides for simple assembly and disassembly – no special tools required. Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles. “Look for the Platinum Color – Crosby Grade 100 Alloy Products.”

S-1325A

Crosby® Solid Wire Rope ThimblesCast Ductile Iron. Fits pin for open wire rope socket, boom pendant clevis and wedge socket.

A-412

Crosby® Wire Rope Wedge SocketsThe S-421T Wire Rope Wedge Socket meets the performance requirements of Federal Specification RR-S-550D, Type C, except those provisions required of the contractor. Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXIP wire rope. The basket is cast steel and individually magnetic particle inspected. The pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter sockets. It secures the tail or “dead end” of the wire rope to the wedge, thus eliminates loss or “Punch out” of the wedge. It also eliminates the need for an extra piece of rope, and is easily installed. Available with Bolt, Nut, and Cotter Pin.

The TERMINATOR™ wedge eliminates the potential breaking off of the tail due to fatigue. The tail, which is secured by the base of the clip and the wedge, is left undeformed and available for reuse. Incorporates Crosby’s patented QUIC-CHECK® “Go” and “No-Go” feature cast into the wedge. The proper size rope is determined when the following criteria are met: 1) The wire rope should pass thru the “Go” hole in the wedge. 2) The wire rope should NOT pass thru the “No-Go” hole in the wedge.

S-421T

Crosby® S423T SUPER TERMINATOR™Wedge socket terminations have a minimum efficiency rating on most high performance, high strength, compacted strand, rotation resistant wire ropes of 80% based on the catalog breaking strength of the various ropes.** The patent pending design eliminates the difficulty of installing high performance wire rope into a wedge socket termination. Proper application of the Super TERMINATOR™ eliminates the “first load” requirement of conventional wedge socket terminations. S-423TW Wedge Kit can be retrofitted onto existing Crosby S-421T TERMINATOR™ wedge sockets. The basket is cast steel and individually magnetic particle inspected. Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter sockets. Secures the tail or “dead end” of the wire rope to the wedge, thus eliminates loss or “punch out” of the wedge. Eliminates the need for an extra piece of rope, and is easily installed. The TERMINATOR™ wedge eliminates the potential breaking off of the tail due to fatigue. The tail, which is secured by the base of the clip and the tension device, is left undeformed and available for reuse.

S-423T

** NOTICE: Due to the unique construction of various ropes, Crosby cannot make a broad general statement that all current and future design of ropes, when properly assembled with the Super TERMINATOR™, will achieve a minimum 80% termination efficiency. Contact us to determine efficiency rating for a specific rope.

18

Body HarnessesEXOFIT NEX™ Full Body HarnessFeatures:

• Covered Labels and i-Safe™ • Revolver™ Vertical Torso Adjusters • Duo-Lok™ Quick Connect Buckles• Built-In Carrying Pocket• Tech-Lite™ Aluminum D-rings• Protective Shoulder Caps• Repel Technology Webbing• Integrated Trauma Straps• Stand-Up Dorsal D-ring

Order the right EXOFIT NEX™ harness for the job:• Vest Style • Climbing/Positioning Harness• Climbing • Cross-Over Climbing• Positioning • Construction Style• Retrieval • Construction/ Climbing Style

Fall Protection

Pro™ Construction Harness

Delta™ Construction Harness

ExoFit™ Tower Harness

ExoFit™ XP Construction Style Harness

ExoFit Nex™ Tower Climbing Harness

Delta™ Vest Style Harness (3-D Ring)

Pro™ Vest-Style HarnessBack D-ring

Pass-thru buckle legs

Pro™ Vest-Style HarnessBack and side D-rings Pass-thru buckle legs

Delta Vest™ Hi-vis Reflective Harness

Delta™ Arc Flash Harness

Self-Retracting Lifeline Systems

REBEL™ TALON™ ULTRA-LOK™

EZ-Stop™ II Retrax™ LanyardSingle Leg with snap hooks at each end x 6' (1.8m).

EZ-STOP™II Retrax™ 100% Tie-off Lanyard


Roofer’s Fall Protection Kit with 50' Sayfline™ system, two reusable roof anchors and bag

Nano-Lok LifelinesSingle-Leg Self-Retracting Twin-Leg Self-Retracting

A. Steel Snap Hook and Steel CarabinerB. Aluminum Carabiner on one end, Captive

Eye Aluminum Carabiner on the other endC. Steel Rebar Hook

A D

E

FB C

D. Two Steel Snap Hooks and Twin Leg Connector

E. Twin-Leg Quick Connector and two Steel Rebar Hooks

F. Twin Leg Connector and two Captive Eye Aluminum Carabiners.

60' Sayfline™ Cable Horizontal Lifeline System

5/8" Polyester/Polypropolene Lifeline

with Snap Hook One End Only

60' Sayfline™ Synthetic Horizontal Lifeline Systems

60’ EZ-Line™ Retractable Horizontal Lifeline System

Lifeline Systems

Roofer’s Fall Protection Kit

with Roof Anchor

6' 2-Leg Shock Absorbing Lanyards100% Tie-Off Shock Absorbing Lanyards

Pro™

Pro™ Stretch

Wrapbax™ 2

Pro™ Shockwave™ 2

Pro™ Stretch

ShockWave2™ Shockwave™ 2 Web LoopShockwave™ 2 Web Loop

Anchor Products

Glyder™ II Horizontal Sliding Beam AnchorFits 3.5" to 14" wide I-beam

Trolley For I-BeamFits 3” to 8” flange up to 11/16” thick

SRL not included

Fixed Beam Anchor

6' Pro™ Web Sling

Steel Plate Anchor

Proud Member Since 1984

310 W Melody LaneCasselberry, FL 32707 USA

Phone: 800-486-5542Fax: 407-260-9196

certifiedslings.com

Documents

Product Information Brochure - Slings