PRODUCT INDEX...made within 15 days of invoice . Materials returned must be shipped prepaid . Discontinued items, custom orders or items that have been out of our factory for 3 months

2www.demandproducts.com

PRODUCT INDEX

Cutlas™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 4-9

Badger™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 10-15

Megaplot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 16-17

Easy Coat Silver / Tri-Mixx™ . . . . . . . . . . . . . . . . . Page 18

Wintech . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 19-21

Viper™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 22-23

Foam Cutting Tables . . . . . . . . . . . . . . . . . . . . . .Pages 24-27

Foam Cutting Hand Tools . . . . . . . . . . . . . . . . .Pages 28-31

Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 32-33

Energy Audit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pages 34-35

Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 36

Safety Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 37

Spray Foam Planes / Saws . . . . . . . . . . . . . . . .Page 38-39

How to Order:Our operation hours are from 8:00am to 5:00pm, Monday through Friday, EST . Our fax machines (1 .800 .534 .8383) and email (sales@demandproducts .com) operate around the clock .

Return Policy:No merchandise can be returned without an authorization number . We do not accept returns on chemicals, coatings or electronic parts . Returns must be made within 15 days of invoice . Materials returned must be shipped prepaid . Discontinued items, custom orders or items that have been out of our factory for 3 months or longer cannot be returned . Authorized returns subject to minimum 15% restocking fee .

Warranty:All of our hand tools carry an unconditional 6-month guarantee . Most of our computerized equipment carries a one (1) year warranty . Demand Products must be notified within 48 hours of receipt of defective or damaged merchandise. Defective products will either be replaced or repaired at no charge. Abused tools will be repaired and returned only if the customer consents to charges in writing .

Please Note:All property rights are reserved . Having no control over the use of the products in this catalog, Demand Products, Inc . assumes no liabilities connected with their use . Under no circumstances is Demand Products or the seller liable for any loss, damage or expense of any kind arising out of the use or inability to use our products. Prices rarely fluctuate, but are subject to change without notice.

© 2014, Demand Products, Inc . - Demand Products, Demand Foam Systems and Demand Foam Cutting Systems are a trademark of Demand Products, Inc . Alpharetta, GA 30004, USA .

31.800.325.7540

Since 1983, Demand Products has strived to provide the very best products, sales and service in the industry . Offering Foam, CNC Hotwire Machines, Robotic Milling Systems, Foam Recycling Systems, Parts and Service are all parts of the puzzle that create the complete picture . Every piece is important . If just one falls out of place it has a ripple effect across the board . Demand Products continues to invest in the latest technology to stay on top of the ever changing market place . That investment carries over to the exceptional staff we have in place as well . The end result is the most important piece of all — a happy customer . Call today to learn how we can serve you .

31.800.325.7540


HK-5Dual Oscillating BladeThe Cutlas HK5 is a dual axis, oscillating blade profile cutting machine suitable for cutting flexible and some rigid foams . It cuts at high speed and is very accurate, making it an excellent choice for high production or prototyping environments. It has full profiling capability on both the horizontal and vertical axises .

HK5

FOAM

CUT

TING

Horizontal Oscillating BladeThe Cutlas HK2 is a horizontal, oscillating blade, profile cutting machine suitable for cutting flexible and some rigid foams . It cuts at high speed and is very accurate, making it an excellent choice for high production or prototyping environments. It has full profiling capability on the horizontal axis only .

HK2

POWER REQUIREMENTMECHANICAL DIMENSIONSMACHINE WEIGHTMAXIMUM FOAM SIZEBLADE SIZE

PROCESSING SPEEDCUTTING ACCURACYSERVO SYSTEMPC OPERATING SYSTEM

220V, 3 PHASE248” X 126” X 90”6,200 LBS118” X 86” X 51” .120” X .020”

0~248”/MIN +/- .0202400-2800 RPMWINDOWS



220V, 3 PHASE248” X 126” X 90”6,200 LBS118” X 86” X 51” .120” X .020”

0~248”/MIN +/- .0202400-2800 RPMWINDOWS

51.800.325.7540

HK4Horizontal Oscillating Blade with Rotating TableThe Cutlas HK4 is a horizontal, oscillating blade, profile cutting machine suitable for cutting flexible and some rigid foams. It cuts at high speed and is very accurate, making it an excellent choice for high production or prototyping environments . It has full profiling capability on the horizontal axis and incorporates a rotating table for more complex cutting .

FOAM CUTTING

HK3Vertical Oscillating BladeThe Cutlas HK3 is a vertical, oscillating blade, profile cutting machine suitable for cutting flexible and some rigid foams . It cuts at high speed and is very accurate, making it an excellent choice for high production or prototyping environments . It has full profiling capability on the vertical axis only.



220V, 3 PHASE197” X 126” X 90”2,900 LBS90” X 86” X 51” .120” X .020”

0~248”/MIN +/- .0202400-2800 RPMWINDOWS



220V, 3 PHASE248” X 126” X 90”6,200 LBS118” X 86” X 51” .120” X .020”

0~248”/MIN +/- .0202400-2800 RPMWINDOWS

See Page 37 for Safety Products for

the Work Place .


FOAM

CUT

TING

HK9.1

HK9.2

Continuous Vertical Blade The Cutlas HK9.1 is a vertical, continuous blade, profile cutting machine suitable for cutting flexible and some rigid foams. It cuts at high speed and is very accurate, making it an excellent choice for high production or prototyping environments. It has full profiling capability on the vertical axis only . Continuous blade machines run, on average, 2-3 times faster than oscillating blade machines .

Continuous Horizontal Blade The Cutlas HK9.2 is a horizontal, continuous blade, profile cutting machine, suitable for cutting flexible and some rigid foams. It cuts at high speed and is very accurate, making it an excellent choice for high production or prototyping environments . It has full profiling capability on the horizontal axis only . Continuous blade machines run, on average, 2-3 times faster than oscillating blade machines .

HK Series Transfer TableThe HK Table transfers foam from the HK9 .1 platform to the HK9 .2 platform .



220V, 3 PHASE236” X 170” X 118”9,259 LBS118” X 86” X 31”525 .8” X .118” X .020”

0~745”/MIN +/- .0400-2800 RPMWINDOWS



220V, 3 PHASE196” X 177” X 95”9,259 LBS78” X 78” X 51”452 .2” X .14” X .020”

0~745”/MIN +/- .0400-2800 RPMWINDOWS

71.800.325.7540

ConvoluterThe Cutlas™ Convoluter is a rugged unit designed to split flexible products where thin sheets from slab material are required . Our Cutlas™ Convoluter is available in three sizes; 65”, 84” and our 92” wide, which is ideal for producing King Size and Cal King size mattresses . Cutlas™ Convoluters, carousels, bandsaws, blade and wire machines will complement your existing production line of equipment .

FOAM CUTTING

CarouselThe Cutlas™ Horizontal Carousel Slitter Foam Saw is a high production machine, allowing for high-speed continuous operation with minimal manual handling . It is the ideal machine for the production of mattress toppers . Applications: furniture, bedding, automotive, aerospace, packaging and medical industries .

SlitterHS Series Horizontal Foam Slitter SawThe Cutlas™ Horizontal Slitter is an auto-indexing machine suitable for slitting and/or sheet cutting various types of flexible foams. It is an excellent solution for furniture, automotive, packaging, athletics and various other industries .

POWER REQUIREMENTCUTTING AREACUTTING THICKNESSCUTTING SPEED

MOTOR POWERBLADE LENGTHMACHINE EXTERNAL SIZEMACHINE WEIGHT

230V, 3 PHASE67” X 100” X 48” .196” - MAX CUT HEIGHT0~3 .3 FT/MIN

11 HP28FT228” X 144” X 143”4000 LBS

DIAMETERFOAM SIZEMAXIMUM FOAM SIZE

~287”59” X 78 .5” X 47” (5 PIECES)90 .5” X 118” X 47” (3 PIECES)

3 SIZES CUT RANGEDPYX-65 65” WIDE x 12” HIGHDPYX-84 84” WIDE X 12” HIGHDPYX-92 92” WIDE X 12” HIGH


the Work Place .


FOAM

CUT

TING

Demand Products’ Vertical Bandsaws are robust vertical saws designed for cutting various types of flexible and rigid foams. Their simple design allows for easy operation and keeps the cost down . These saws come complete with 2 blades, built in blade sharpener and a maintenance tool kit . Three models are available .

DPVBS4L-LG

DPVBS4L-STD

DPVBS2L

Vertical Bandsaws

DPVBS2LMINIMUM CUTTING THICKNESSMAX CUTTING HEIGHTMAX CUTTING LENGTHINSIDE WORK TABLE SIZE OUTSIDE WORK TABLE SIZE

MACHINE DIMENSIONS BLADE SIZEBLADE MOTORMACHINE WEIGHTMAX CUTTING SPEED

0 .20” 23 .60” 39 .37” 19 .68” 39 .37”

65” X 63” X 85”4620MM X 25MM X .45MM2HP - 208/220/380/425V1,764 LBS200MM/SEC

DPVBS4L - STDMINIMUM CUTTING THICKNESSMAX CUTTING HEIGHTMAX CUTTING LENGTHINSIDE WORK TABLE SIZE OUTSIDE WORK TABLE SIZEMACHINE WEIGHT

MACHINE DIMENSIONS BLADE SIZEBLADE MOTORBLADE SPEEDMAX CUTTING SPEED

0 .20” 47 .20” 96 .06” 51 .90” 47 .20”2,866 LBS

179” X 157 .5” X 100 .4”7120MM X 25MM X .45MM2HP-208/220/380/425V, 50Hz/60Hz270 RPM200MM/SEC

DPVBS4L - LGMINIMUM CUTTING THICKNESSMAX CUTTING HEIGHTMAX CUTTING LENGTHINSIDE WORK TABLE SIZE OUTSIDE WORK TABLE SIZEMACHINE WEIGHT

MACHINE DIMENSIONS BLADE SIZEBLADE MOTORBLADE SPEEDMAX CUTTING SPEED

0 .20” 47 .20” 96 .06” 67 .70” 78 .70”3,300 LBS

179” X 189” X 101”7920MM X 25MM X .45MM2HP, 208/220/380/425V, 50Hz/60Hz270 RPM200MM/SEC


the Work Place .

91.800.325.7540

FOAM CUTTING

Foam SleeverThe Cutlas MC2 encases mattresses with a strong Polyester or Polyamide cover, giving a smooth, firm finish that easily slides into a mattress case. Stockinet also protects the fabric cover from abrasive damage by the foam . The MC2 puts a Stockinet cover onto all shapes and sizes one after the other, without the need for size adjustment . Cycle time is approximately 20 seconds per . Encases all types of foam material and is suitable for covering mattresses or upholstery cushions .

MC2

Glue MachineFoam Mattress Roll Coater Glue MachineThe Cutlas HK10 (Roll Coater) is the first domestic professional roll coater for water-based glue. It has the automatic identification system which can adjust the roller height automatically according to the foam sheet thickness . The glue can be spread evenly with very thin thickness . The foam can be roll packed in a short time . It can be used together with the package line .

MATTRESS THICKNESSSEALING STRIPCYCLE TIME/UNITOPERATING SYSTEM

MACHINE DIMENSIONS MACHINE WEIGHTELECTRICAL SUPPLYAIR SUPPLY

89”L X 9” X UNLIMITED 86” MAXAPPROX 20 SEC .IC CONTROLLED

175” X 120” X 59”2 .650 LBS220/240V, 50HZ116 PSI

MACHINE SIZEPOWERMACHINE WEIGHTMONITOR

GLUE TYPEMATERIAL THICKNESSMATERIAL WIDTHCONSUMPTION

189” X 132” X 79”8HP, 380V, 60HZ~2,600 LBSTOUCH SCREEN

WATER BASED GLUE4” - 82 .5” 2/5” - 11 3/4”40 - 50 (g/m2)


FD35

™

FD15FD12 FD25

FOAM

REC

YCLI

NG

Heat DensifiersThe Badger™ Densifier Series will reduce your polystyrene, polypropylene and polyethylene by up to 98% of its original form. These Densifiers will pay for themselves in a short amount of time by keeping your scrap foam out of the waste stream and turning it into marketable purge or block . The Badger™ Densifier Series has passed rigorous air quality testing for health and environmental safety . Heat densification will not work with polyurethane.

TRANSFORM WASTE PILESINTO PROFITABLE BRICKS

“What’s great about EPS Foam - it’s 100% recyclable and profitable. You can make ev-erything from surfboards to picture frames by recycling foam”.

- V.A. Brajdic Foam Expert

FD12, FD15, FD25, FD35

BADGER FD12MOTORPOWER REQUIREMENTSFEED OPENING PROCESS RATE

7 .5 HP230V/460V, 3 PHASE21 .75” X 16 .75”UP TO 150 LBS PER HOUR


25 HP230V/460V, 3 PHASE25” X 16”UP TO 275 LBS PER HOUR




50 HP460V, 3 PHASE59” X 35 .5”UP TO 800 LBS PER HOUR


the Work Place .

111.800.325.7540

™

FB285 & FB585

FD2000 & FD3000EPS CompactorsThe Badger™ EPS Compactor is a machine to reduce the size of expanded polystyrene foam and expanded polypropylene foam for easier transportation . It is also known as an EPS densifier and EPS cold compactor. The EPS compactor is widely used in seafood processing plants, electronic factories, white and black goods stores and supermarkets .

FOAM RECYCLING

Foam Densifier - Grinder, Storage Hopper & Densifier In OneThe Badger™ FB Series is designed to fit a range of customer recycling needs based on their processing requirement of scrap foam . They are larger models which work well for locations that generate higher volumes of foam . These are high output capacity machines with either single or dual port output designs . The pre-breaker has an input feed rate of up to 1200 lbs of foam per hour . The blower carries the ground foam to the hopper where it has a controlled variable feed into the extruder . These two production units are ideal for recycling centers, county landfill municipalities, foam producers and foam manufacturers .

BADGER FB285 MOTORPOWER REQUIREMENTSFEED OPENING PROCESS RATE

25 HP230V/460V, 3 PHASE56” x 36”UP TO 400 LBS PER HOUR


16 .5 KW220V OR 460, 3 PHASE29” x 39”UP TO 200 LBS PER HOUR


25 KW220V OR 460, 3 PHASE29” x 49”UP TO 500 LBS PER HOUR

BADGER FB585 MOTORPOWER REQUIREMENTSFEED OPENING PROCESS RATE

25 HP230V/460V, 3 PHASE56” x 36”UP TO 700 LBS PER HOUR

COMPACTEDFOAM LOGS

Can Be Configured for Marine

Applications


the Work Place .


™

Horizontal Baler

Foam Balers

Badger™ Foam Balers have been engineered specifically for the unique challenges of foam . The passive spring-loaded dawg retention system eliminates spring back and eliminates the need for an auxiliary hydraulic system common with other foam balers. When foam fights back it can send a shock through the hydraulic system, but our dampened system cushions the hydraulics, which prevents leaks and reduces maintenance costs .

Other companies modify cardboard and plastic balers to accommodate foam and fiber, but we’ve learned that foam is a different beast altogether . What works on cardboard or plastic just won’t handle foam - from feed opening, to hydraulic systems, to material retention and bale escapement . So we took a different approach and designed a baler specifically made to tame the beast.

The Elephant Ear Dawg Assembly Used on Horizontal Foam Balers Provides Maximum Holding Capacity for Baling Foam.

FOAM

REC

YCLI

NG

Vertical Baler

BADGER DPHCE4860F - Horizontal BalerHORSEPOWERFEED SIZEBALE WEIGHTPOWER REQUIREMENTSSHIPPING WEIGHT

30 HP46” X 72”UP TO 1500 LBS230/460V 25,000 LBS

BADGER DPMP60F - Vertical BalerHORSEPOWERFEED SIZEBALE WEIGHTPOWER REQUIREMENTSSHIPPING WEIGHT

15 HP27” X 60”UP TO 750 LBS230/460V5,100 LBS See Page 37 for

Safety Products for the Work Place .

131.800.325.7540

™

FOAM RECYCLING

DPC1620XDPC1212X

Additional Models Are Available

GranulatorsThe Badger™ Granulator Series is designed for heavy duty and high capacity industrial granulation . Ruggedly built to international standards, the C Series can handle a wide variety of materials including most soft and rigid foams, bulky blow molded parts, thermoformed web and cut-sheet products, extruded sheet and film, plus the full gamut of post-consumer plastics for recycling operations .

SHREDDED POLYETHYLENE

BADGER DPC1620XHORSEPOWERFEED SIZETHROUGHPUTPOWER REQUIREMENTSEVACUATION

30 HP16” X 20”UP TO 900 LBS PER HOUR230/460VAIRVEYOR

BADGER DPC1212XHORSEPOWERFEED SIZETHROUGHPUTPOWER REQUIREMENTSEVACUATION

15 HP12” X 17”UP TO 200 LBS PER HOUR230/460V AIRVEYOR


™

FOAM

REC

YCLI

NG

EPS Foam Crusher, Grinder, ShredderThe Badger™ FG Grinder Series reduces the volume of polystyrene foam for easier transportation . Be it packaging material, insulation board, cut-offs from modeling or skeleton EPS sheet thermoforming, the machine reduces the big pieces into smaller flakes, which can be a replacement for shipping peanuts . The FG Grinders Series will break up your EPS foam boxes, EPS sheet, EPP blocks and XPS foam board to smaller pieces. The flakes will take up less storage volume and facilitates further processing of compaction and extrusion pelletizing .

FG180

FG250

Additional Models Are Available

FG180 & FG250

GROUND EPS FOAM

BADGER FG180MOTORPOWER REQUIREMENTSFEED OPENING PROCESS RATE

1 HP110V18” X 13”UP TO 65 LBS PER HOUR

BADGER FG250MOTORPOWER REQUIREMENTSFEED OPENING PROCESS RATE


151.800.325.7540$

™

Hot Wire - 3/4” Cubes

Recyk™

EPS Hot Wire Waste Cuber• Gravity Fed into 18” x 18” Hot Wire Grid Pattern • 3/4” Grid Openings Cut Foam• Manually Move Foam Sideways While Feeding Foam Into ReCyk™ or Recycle Twice to Get 3/4” Cubes . • Machine Measures: 25” x 25” x 5’• Weighs 125 Pounds• Portable: Moves Around Easily

RFSRFSB

Item # Recyk™ Foam SaverRecyk™ Bags 36” x 58”, 100 count

Description

FOAM RECYCLING

THE BENEFIT OF

There is great opportunity to turn your foam scraps into a revenue stream .

Densified foam bricks are loaded onto a pallet for resale to recycling brokers .

The recycled foam bricks are converted by manufacturers into a multitude of products we use in our everyday lives .

Recycling scrap foam contributes to cleaner landfills, leading to more green space with park benches made from recycled materials and more .

Convert your scrap foam into profits.

Demand Foam Systems can put you in contact with companies that will buy your processed material and pick it up from your location.Call today to learn more.


C848 CNC CutterSingle-Wire 8’ with Turntable• Cuts Up to 8’ Wide by 4’ High• Industrial Quality• Heavy Duty Extruded Aluminum Construction• Automatic Wire Tensioner• 6 Independent, Heavy Duty Stepper Motors• Built-in TurnTable• Accepts Vector Art, .pit or CAD .dxf Files• Operates on 110 Volts• 5 Year Warranty

Item #TKC848

Turnkey Pricing Includes:• Machine • TurnTable • Controller-Remote Control • FoamShaper™ Software • CorelDraw® Software • Windows Software • 5 Year Warranty • 19” LCD Flat Screen Monitor • PC Computer • Shipping in Continental U.S. • 1 Day Installation & Training

Does Not Include Computer Cart

TW848 Independent Axis CNC CutterSingle-Wire 8’ with Lathe & Turntable• Will Cut Tapered Fluted Columns• Cuts Up to 8’ Wide by 4’ High• Comes Complete with Lathe & TurnTable• Independent Axis Control• Industrial Quality• Heavy Duty Extruded Aluminum Construction• Automatic Wire Tensioner• 8 Independent Heavy Duty Stepper Motors• Accepts Vector Art, .pit or CAD .dxf Files• Operates on 110 Volts• 5 Year Warranty

Item #TKTW848i

Turnkey Pricing Includes:• Machine • TurnTable • Controller-Remote Control • Lathe/ShapeWire Bar • Independent Axis Control • FoamShaper™ Software • CorelDraw® Software • Windows Software • 5 Year Warranty • 19” LCD Flat Screen Monitor • PC Computer • Shipping in Continental U.S. • 1 1/2 Day Installation & Training

* Does Not Include Computer Cart

Columns • Pipe Insulation • Sign Letters • Graphics • Store Props & Displays • Logos • Amusement Park Props Architectural Scale Models • Easy Coat Coatings

Lifetime Software Updates • Call For Demo • Additional Sizes Available

CNC

FOAM

CUT

TING

*

171.800.325.7540

20”

10”

30”

20”

MW848 CNC Cutter10-Wire 8’ with Lathe & Turntable• Can Cut Using 1 - 10 Wires• Cuts Up to 8’ Wide by 4’ High• Comes Complete with Lathe & TurnTable• Industrial Quality• Heavy Duty Extruded Aluminum Construction• Automatic Wire Tensioner• 8 Independent Heavy Duty Stepper Motors• Accepts Vector Art, .pit or CAD .dxf Files• Operates on 220 Volts, Single Phase• 5 Year Warranty

Item #TKMW848

Turnkey Pricing Includes:• Machine • TurnTable • Controller-Remote Control • Lathe/ShapeWire Bar • FoamShaper™ Software • CorelDraw® Software • Windows Software • 5 Year Warranty • 19” LCD Flat Screen Monitor • PC Computer • Shipping in Continental U.S. • 2 Day Installation & Training

* Does Not Include Computer Cart

Arch Cutting and Base CuttingArch: Up to 20” Wide x 10” High Base: Up to 43” Wide x 30” High• Adjustable Leveling Feet• Table Size Approximately 39” x 58” with 37” Table Height• Cuts Compound Curves and Negative for Precast Concrete• Auto Start & Stop when Shape Wire is Moved In/Out of Foam• Minimum Arch Internal Radius of 5” and External Radius of 10”• 220 Volts at 16 Amps. Will Heat Up To 60” of 11 Gauge or NWFW Wire .• Auto Start & Stop in Base/Cap Cutting When You Push the Shape Wire Into Foam• Adjustable Feed Rate For Arch Cutter - Adjustable Rotation Speed for Base/Cap Cutter• Approximate Shipping Weight is 250 Pounds

Item #CC70

Columns • Pipe Insulation • Sign Letters • Graphics • Store Props & Displays • Logos • Amusement Park Props Architectural Scale Models • Easy Coat Coatings

Lifetime Software Updates • Call For Demo • Additional Sizes Available

CNC FOAM CUTTING

*


FOAM

CUT

TING

• Footprint is 57” x 62”• HD Stainless Steel and Aluminum Construction• Profiles from 2” to 36” Wide and 18” High• Sprocket Feed Depth Controls• 110 or 220 Volts• One Year Warranty

Easy Coat SilverAutomatic Foam Coater With or Without Fiber Mesh

ECOATER

Easy-Coat Bag: 50 lb BagFull Truck Load: 16 Pallets (896 Bags)1/2 Truck Load: 8 Pallets (448 Bags)1/4 Truck Load: 4 Pallets (224 Bags) 2 Pallets (112 Bags)

Description

Easy Coat CoatingEspecially Designed For Shape Coating50-60sq. ft. @ 1/4”

TriMixx™ Commercial Duty 3-Position Production Mixer• Designed for Mixing and Blending Industrial Coatings• Powered by Three, 3/4 Horsepower Motors with a 5 to 1 Ratio Transmission• Emergency Stop Button for Each Motor• Carriage Can Be Positioned at Any Height• 345 RPM, 110 Volts at 30 Amps • Safety Foot Switch• Comes Complete with Roller Conveyor• Quick-Disconnect Chucks• Counter Balance Carriage• Three M819 Mixing Paddles• Bucket Locking Mechanism• Super Heavy Duty Ball Bearing Motors• Heavy Duty Production Roller Conveyor

TMIXXItem # Description

TriMixx™ Mixer

Note: Shaker and Tint Equipment quotes available upon request

EC50G

Item #

191.800.325.7540

FOAM CUTTING

CompusetHot Wire This state-of--the-art contour cutter is for profiling expanded polystyrene (EPS) foam . Its multiple hot-wires are automatically positioned to the specified quantity and spacing by the system controller . Machines can be supplied in 20 and 40 wire versions .This machine has many advantages, including rapid job set-up, accurate and automatic wire spacing, powerful software and the high productivity that comes with multiple wire profiling.The advantages to this high-production machine become apparent when you consider that it is capable of single-wire profiling, single-pass profiling, multiple-wire profiling, slabbing and down cutting .The machine’s cutting frame tilts for multiple wire sheet cutting . The Profiler software is simple to use so that operators have a minimal learning curve . Wintech’s nesting software is the benchmark in the commercial foam cutting industry .

CompulineFast Wire/Hot Wire ComboWith the versatility of three cutting frames mounted on a conveyor providing automatic block detection, downcutting, slicing/profiling and trimming in a continuous sheeting process, the Compuline dramatically exceeds conventional manual or semi-automatic cutting systems . Each operation can also be used individually .

All cutting setup and control processes are input via the console computer. It can be configured automatically as a sheet cutting line or a profiling machine using either the Fast Wire or the Hot Wire cutting frame .

Because the block is moving at a continuous speed with no need to stop for any individual process during the sheeting operation, the throughput is very high and requires minimal labor input . The conveyor speed can be set by the operator for different types of foams . Once programmed for the required final block dimensions, automatic block detection allows continuous feeding of the block onto the Compuline without further operator involvement .

EPS Foams

Rigid & Semi-Rigid Foams plus EPS


the Work Place .


FOAM

CUT

TING

Fastwire (Abrasive Wire)Contour Cutters:Our state-of-the-art contour abrasive wire cutters combine versatility, accuracy and reliability to cut a wide spectrum of rigid and flexible foams. Unlike the Oscillating Blade Machine, this machine uses a high-speed, continuous loop abrasive wire that can profile almost all foams including tough FoamGlass. Fixed bed or Conveyor tables can be chosen along with numerous other time saving options to give you the most advanced and productive machine of its kind . Available option on select machines - manual 10-wire hot wire .A vertical wire machine is available to handle all of the same applications as our horizontal Fast Wire . This machine only comes with a conveyor bed .

2xTwin GantriesDouble Production!

Twin FastwireContour Cutters:The Wintech Twin Fastwire contour cutting machine consists of a fixed cutting table with twin gantries . Abrasive cutting wires move horizontally along the cutting table . Within the gantry, another system of linear bearings is used to control the vertical movement of each cutting wire .

The Fastwire Motor, a direct drive electric motor, is mounted with the gantry assembly .

Vertical movement of the cutting wire and the horizontal movement of the gantry are controlled by stepper motors, mounted beneath the cutting table as part of the gantry carriage .

Rigid & Semi-Rigid FoamsSee Page 37 for

Safety Products for the Work Place .

211.800.325.7540

FOAM CUTTING

Wintech has mastered the small footprint concept on all of its machines while adding useful features that make sense and more importantly, add efficiency . The “small footprint” concept is ideal for today’s economic environment where manufacturing efficiency is the rule.The intuitive nature of the Wintech Profiler Software means operators require less training time and less tech support than other software programs and profile cutting machines.

Dual FastwireContour Cutters:Combine the best features to offer you both vertical and horizontal fast wire cutting . Newly designed command consoles offer touch screen operation and remote cordless convenience . Utilizing high-speed continuous loop abrasive wires, profiles can be cut from flexible foam to tough FoamGlass. Highly accurate conveyor tables combine with simplified state-of-the-art CAD software for a super productive unit . The most productive, advanced machine of its type - while still being easy to understand and operate .

Rigid & Semi-Rigid Foams

Dual Oscillating BladeContour Cutters:Used to contour cut soft flexible polyurethane foams using Oscillating Blade Technology. Our Dual Blade (both vertical & horizontal) lets you perform all profiling and slicing without the block ever leaving the machine . These new machines provide revolutionary new ways of profiling foam with unprecedented flexibility, accuracy and ease of use. We deliver levels of automation and efficiency not available until now.

Flexible Polyurethane Foams


the Work Place .


ROUTER THEMEING SYSTEM

FOAM

MIL

LING

Our Viper TurnKey Router and Robot Systems offer:• Complete installation and training• Field and remote service and support• Wide range of materials can be processed• Choice of 3d Scanners• Choice of CNC HotWire • Foam Waste Reduction Equipment• Coatings Expertise

Router• Up to 18” Over Gantry Height • 3 Axis on Table Milling

Robot• Up to 8 Axis with Turntable and Rail System• 7’ Robotic Arm Reach • Repeatability at High Speed

The Production Process:• Viper Scan An Original Scale Model/Maquette• Make Revisions• CNC HotWire Cuts Your Stock• Viper Robot/Router Mills Finished Piece• Apply Coating• Artistic Finish Painting

scan

mill

scale

™

Photo Credit: Chisel 3D

231.800.325.7540

ROBOT THEMEING SYSTEM

FOAM MILLING

Viper TurnKey Milling System

3-D CNC cutting allows you to create large, complicated projects in a fraction of the time it takes to create them by hand . With precise repeatability and unlimited scalability, Viper CNC milling is a must for architectural molds, stage design, movie props, theater props and themeing operations . Our Viper Robot Themeing Systems (including 3-D scanners and CNC hotwire machines) combine the latest technologies to give you the power to create virtually anything from your boundless imagination . Call us to discuss how our Viper Themeing Systems will take your concept to a finished piece in no time flat.

Optimize

Export

Scan



SIDEWINDER™

FOAM

CUT

TING

TABL

ES

SideWinder™

• Cuts Compound Miters, Angle Straight Cuts, Columns and Decorative Moldings• Uses Your Hardboard Template Patterns to Trace Shapes• Variable Heat Control — Heats Up Extremely Fast• 110 Volts. Also Available in 220 Volts• 2’ x 4’ Block Table Capacity• 33” X 62” Wide Table Size• Weighs Just 125 Pounds • Cuts 48” Wide EPS• Lease To Buy Available

KITSWMAGNUMKITSWMNW100NW500

Item #SideWinder™ OnlyMagnum Power ControllerSideWinder™ w/ MagnumNi-Chrome Wire, 100 feetNi-Chrome Wire, 500 feet

Description

Ornamental 4’ Shape Cutter

SideWinder 8™

SW8MAG8IW100IW500

Item #SideWinder 8™ w/ ControllerMag 8 Power ControllerInconel Wire, 100 feetInconel Wire, 500 feet

Description

• Motorized Pattern Follower• Industrial Quality • Single Wire Cutter• Cuts Compound Miters, Angle Straight Cuts, Columns and Decorative Moldings• Uses Your Hardboard Template Patterns to Trace Shapes • Variable Heat Control — Heats Up Extremely Fast• 110 Volts. Also Available in 220 Volts• Capacity: 2 Foot Square by 8’ Long• 48” X 96” Wide Table Size• Weighs Just 350 Pounds • Folding Legs• Price Includes Controller and Motorized Follower• Lease To Buy Available

Ornamental 8’ Shape Cutter

Pattern Template Guide

PTGPTGD

Item #Standard Version (Booklet Only)Digital Version (Booklet w/ CD)

Description

• How To Pattern Guide• Easy to Follow Instructions with 63 Profiles

How To: Pattern Guide

Pattern Template GuideHow-To Pattern Guide with Easy To Follow Illustrations

Includes 63 Profiles

251.800.325.7540

JOBCUT™ / STYROCUT™

FOAM CUTTING TABLES

StyroCUT 15™

• Use In-Plant or On Job Site• Foot Pedal Control• Designed by Engineers to Cut Straight, Channel, Angles and Tapers• Portable — Weighs Only 117 Pounds• Capable of Vertical and Horizontal Cuts• Table Tilts and Locks 0°- 45°• Cuts 15” Deep by 4’ Wide• 60” Wide Cutting Table by 27” Deep

KITSCMAGNUMKITSCMNW100NW500

Item #StyroCut™ OnlyMagnum Power ControllerStyroCut™ w/ MagnumNi-Chrome Wire, 100 feetNi-Chrome Wire, 500 feet

Description

Our Best Machine

JobCut™

• Portable - Weighs Only 45 Pounds• Sets Up and Folds Down in Seconds• Cuts 12” at 90°• Harp Tilts - Not the Table! • Cuts from 1° to 90°• Requires Two 2” x 8” x 32” for assembly• 110 Volts. Also Available in 220 Volts• Cutting Width 48”• Folds Quickly to only 5” for Easy Storage

JOBCUTMAGNUMKITJCMNW100NW500

Item #JobCut™ OnlyMagnum Power ControllerJobCut™ w/ MagnumNi-Chrome Wire, 100 feetNi-Chrome Wire, 500 feet

Description

Does Not Include Saw Horses or Wood

Designed for Job Site Performance

OVER 30 YEARS OFPROVEN PERFORMANCE

IN THE FIELD!


STYROSMITH™ / BLOCK BUDDY™

FOAM

CUT

TING

TABL

ES

StyroSmith™

• Ornamental Shapes• Vertical & Horizontal Straight Cuts• Channels, Angles, Tapers, Compound Miters, Straight Cuts, Columns, Decorative Moldings, etc .• 110 Volt • 24” High Block Table Capacity• 4’ Wide Block Table Capacity• Auxiliary Table• Weight 225 Pounds• Lease To Buy Available

KITSSMAGNUMKITSSMNW100NW500

Item #StyroSmith™ OnlyMagnum Power ControllerStyroSmith™ w/ MagnumNi-Chrome Wire, 100 feetNi-Chrome Wire, 500 feet

Description

SideWinder™ & StyroCut™

2-in-1 Hot Wire Down Cutter & Ornamental Shaper

Block Buddy™

• Shaves, Cuts and Miters• Miters from 0 to 45º• Cuts 18” Deep Block• Weighs Only 35 Pounds• Legs Fold for Easy Storage• 24” Depth Cuts at 90º• 16” Depth cuts at 45º • Great for ICF

BBMAGNUMKITBBMNW100NW500

Item #Block Buddy™ OnlyMagnum Power ControllerBlock Buddy™ w/ MagnumNi-Chrome Wire, 100 feetNi-Chrome Wire, 500 feet

Cornice Cutter

Convert Styrocut 15 to StyroSmith

271.800.325.7540

QUICKSILVER™

FOAM CUTTING TABLES

Quick Silver 12/48™

Quick Silver 12/8™

• Portable — Weighs Only 60 Pounds• Sets Up and Folds Down in Seconds• Cuts 12” at 90° and Harp Swings 180° for Angle Cuts• Cuts Tapers and Cones• Water Resistant Polypropylene Top• 110 Volts. Also Available in 220 Volts• Built-in 24” Table Extension • Cutting Width 48” or 96”

QS1248MAGNUMKITQSMNW100NW500QS8IW100IW500

Item #Quick Silver™ 12/48Magnum Power ControllerQS1248 w/ MagnumNi-Chrome Wire, 100 feetNi-Chrome Wire, 500 feetQuick Silver™ 8’ w/ ControllerInconel Wire, 100 feetInconel Wire, 500 feet

Description

Our Most Versatile Portable Machine

Geo Foam Hot Wire Kit

KITGFHWHIW100

Item #Hot Wire KitInconel Chrome Wire, 100 ft .

Description

• Hot Wire Handles• Mag8 Controller• From 24” to 108”• 100 Foot Roll of Inconel Wire• Carrying Case

Hot Wire Kit Includes:

Hot Wire Handles

• Can Be Used for Cutting Blocks of Geo Foam• 24” to 53” wire uses a standard Magnum Controller• 24” to 108” wire uses a Mag8 Controller

HWHMAGNUMNW100KITHWH4MAG8IW100KITHWH8HWPHP1

Item #Hot Wire Holders (Set of 2)4’ Magnum Power ControllerNi-Chrome Wire, 100 ft .HWH & 4’ Magnum (comes w/ NW100 wire)8’ Magnum Power ControllerInconel Chrome Wire, 100 ft .HWH & 8’ Magnum (comes w/ IW100 wire)HWH Spring, each

Description

10’ & 17’ Also Available - Please Call

Free-Hand Cutting

Harp Swings 180° for Special Cuts

Compact!


2”, 4” & 6” Blades AvailableHKTCR

HEATS UP TO 10” WIRE

ADJUSTABLE HEAT DIAL

Hot Knife™ CR CutRite™Complete with Case• 150 Watts• Includes 4” & 6” Blades and Case• Electronic Circuit Board Powered • Variable Power Control• Lightweight• Stamped Blades• Spring Loaded Safety Trigger

HKTCR

200CR400CR600CRHDC220 HKTCRP01

Item # Hot Knife CR & Blade Adapter w/ 4” & 6” Blades2” Blade4” Blade6” Blade220 Volt ConverterBlade Adapter

Description

CITOOL

THE ORIGINAL HOT KNIFE™

FOAM

CUT

TING

HAN

D TO

OLS

Hot Knife™ 4” Adapter

• Vertically Positions the Hot Knife™

• Handles up to 4” Wide NWFW Blades• Hot Knife Sold Separately• NWFW Wire Sold separately

GJA3GNWFW

Item # AdapterFlat Wire, per foot

Description

Vertical Adapter w/ Guide

Hot Knife™ 4” Adapter

• Horizontally Positions the Hot Knife™

• Handles up to 4” Wide NWFW Blades• Hot Knife Sold Separately• NWFW Wire Sold separately

GJA4GItem #

AdapterDescription

Horizontal Adapter w/ Guide

Hot Knife™

The Original• Transformer Powered• Lightweight — Only 1 Pound• High Quality Blades with Post Mounts not Stamped • Spring Loaded Safety Trigger • Blade Sold Separately • On / Off Finger Control

HKTHKT300HKT450HKT550

Item #Hot Knife™ Tool, 105 WattsHot Knife™ Tool, w/ 3” BladeHot Knife™ Tool, w/ 4 .5” Blade Hot Knife™ Tool, w/ 5 .5” Blade

Description

STOPS

STOPL

G50 250 300 450 550G75 G100 G75SP SPV SPSQ

291.800.325.7540

INCLUDES:Magnum, Mag8 or Mag10, Gator Cord, 2 Insulators, Spring and 100’ Roll of Wire

POWER CONTROLLERS / WIRE

FOAM CUTTING HAND TOOLS

Magnum Controllers & Wire

• Uses Only Light Gauge Wire• Each Size is Designed to Heat the Appropriate Length of Wire to Cut EPS Foam

MAGNUMNW100NW500MAG8MAG10MAG17IW100IW500

Item #Magnum Power ControllerNi-Chrome Wire, 100 feet ( .0228)Ni-Chrome Wire, 500 feet ( .02265)8’ Magnum Power Controller10’ Magnum Power Controller17’ Magnum Power ControllerInconel Wire, 100 Foot Roll ( .0126)Inconel Wire, 500 Foot Roll ( .0126)

Description

MAGNUMHeats NW100 Wire 24” to 53” long to cut EPS Foam

MAG8Heats IW100 Wire 24” to 108” long to cut EPS Foam

Wire / Wire Length / Controller:

4’, 8’, 10’ & 17’

Hot Wire Kit

• Everything You Need to Build Your Own 4’ to 17’ Hot Wire Machine• Magnum• Gator Cord• 2 Insulators• Spring• 100’ Roll of Wire

KITHWKITHW8KITHW10ULP200ULP400ULP01SCP00

Item #2’- 4’ Hot Wire Kit2’- 8’ Hot Wire Kit2’- 10’ Hot Wire Kit4’ Wide Gator Cord Only8’ Wide Gator Cord OnlyInsulator, eachSpring, each

Description

KITHW17 (17’) Also Available

Do-It-Yourself Kit

MAG8Heats Inconel Wire 24” to 108” long to cut EPS Foam

MAG10 Heats 24” to 125” of Inconel Wire

MAGNUMHeats Ni-Chrome Wire 24” to 53” long to cut EPS Foam

APC Controller Use with Shape Wire• Uses Heavy Gauge Wire Only• Heats 1’-3’ of NWFW or NWRW11 or 16 Wire

APCItem #

Auxiliary Power ControllerDescription

NWRW11

NWRW1616 Gauge, 1/16” (.0625)

Shown Actual Size

11 Gauge, 1/8” (.125)

NWFW 3/16” x 1/32”

Shaping Wire Ni-Chrome Wires

NWRW16NWRW11NWFW

Item #Round Ni-Chrome Wire, per foot ( .0625)Round Ni-Chrome Wire, per foot ( .125)Flat Ni-Chrome Wire, per foot

Description


HR

600 - 51/2”

250 450G50 G75 G100 G75SP SPV SPSQ

STOPS

STOPL

300 550

800 - 71/2”

HOT ROD™

FOAM

CUT

TING

HAN

D TO

OLS

Hot Rod™

• Strongest in the Industry• Cuts All Day Long Without Overheating • Uses Heavy Gauge Round and Flat Wire As Well As Standard Hot Knife Blades• Variable Heat Control — Heats Up Extremely Fast• Remote HD Transformer with Extra Long 9 Foot Cable• Excellent for SIP’s, ICF, EIFS or In-Plant Production Applications• Heats From 8” to 24” of NWFW Wire • 110 Volts. Also Available in 220 Volts

Super Duty 50 Amp EPS Panel Cutter

*HRKITHRK*600*800*300*450 *550*G50*G75*G100*G75SP*SPV*SPSQ*STOPS*STOPL*CASEHR220

KITHRK220

HRP02

Item #Hot Rod™ Only, 110 Volts (60 Hertz)Hot Rod™ Kit Includes *items below51/2” Straight Blade71/2” Straight Blade3” Straight Blade41/2” Straight Blade 51/2” Straight Blade1/2” Curve Blade3/4” Curve Blade1” Curve Blade3/4” Curve Blade w/ Lip3/4” V Groove w/ Lip3/4” Square Groove w/ LipShort Ceramic StopLong Ceramic StopHot Rod CaseHot Rod™ Tool Only, 220 Volts(50 / 60 Hertz)Hot Rod™ Kit, 220 Volts(50 / 60 Hertz)Hot Rod™ Cord and Handle

Description

GJA10G ADAPTER10” Blade Width

CORD AND HANDLE



Hot Rod™ Blade Adapters

• Excellent for SIP’s, ICF, EIFS or In-Plant Production Applications

GJA3GGJA6GGJA10GHRP02NWFW

Item # 4” Groove Jet™ Adapter6” Groove Jet™ Adapter10” Groove Jet™ AdapterCord and HandleFlat Ni-Chrome Wire, per foot

Description

3 Convenient Sizes w/ Guides

See Page 29 for Complete Shape Wire Specifications

NWRW11

NWRW1616 Gauge, 1/16” (.0625)

Shown Actual Size

11 Gauge, 1/8” (.125)

NWFW 3/16” x 1/32”

311.800.325.7540

Z06 Z40

Z45

ZETZ CUTTERS™

FOAM CUTTING HAND TOOLS

Zetz Specialty BladesZ06: Rounded Edge to Glide Along Cutting Surface .Z40: Wide Blade Back and Reinforced Cutting Flange for Stable Cutting .Z45: Curved Cutting Edge and Thick Blades .

Z06Z40Z45

Item #0 .6 mm Thick / 3 mm Cutting Edge0 .6 mm Thick / 40 mm Cutting Edge0 .8 mm Thick / 45 mm Cutting Edge

Description

Please Note: Other Blades Available

Zetz 24™

• Excellent for Cutting Rubber, Polyethylene & Polypropylene• Heats Up Instantly• Variable Heat Control • Heats Up Extremely Fast• Remote HD Transformer with Extra Long 91/2 Foot Cable• 110 Volts. Also Available in 220 Volts• Cuts Materials Up to 5” Thick

ZETZ24Z75Z120

Item #Industrial Thermocutter3” Blade (each)43/4” Blade (each)

Description


Designed for Industrial Operation

Hot Knife™ Fabric Cutter• Comes w/ R Blade, Case and Blade Guide• Designed to Cut Synthetic Fabric, Sail Cloth, Webbing, Ropes & Cords• Spring Loaded Safety Trigger• Electronic Circuit Board Powered • Lightweight• Post Mounted Blades • Variable Heat Control

HKTFCFCBRHDC220

Item #Fabric Cutter w/ R Blade, 130 WattsFabric Cutter R Blade220 Volt Converter

Description

Z50, 2” BladeZ100, 4” Blade Z200, 8” Blade

Zetz 20™

• Excellent for Cutting Rubber, Polyethylene & Polypropylene• Electronic Circuit Board Powered• Heats Up Quickly• Adjustable Temperature Control • Off-On Finger Control• 110 Volts. Also Available in 220 Volts• Cuts Materials Up to 5” Thick

ZTC20Z50Z100Z200

Item #Thermocutter2” Blade (Pack of 6 Blades)4” Blade (each)8” Blade (each)

Description


Thermocutter


THEMEING / PROPS

COAT

INGS

Coverage Rule of Thumb for Spreadable Coatings:1 mil thickness of liquid will theoretically cover 1604 square feet . (If you need 5 mils thick — 5 divided into 1604 would be 320 sq . ft .)

Elasta-Shield™

Dries clear. Water soluble flexible shield protects EPS foam for general handling . Will act as an adhesive for applying fabrics if they are applied while Elasta-Shield is wet . Can be brushed, rolled or sprayed . Covers 320 sq . ft . at 5 mils .

ESCKITESC

Item #Elasta-Shield™ Coating, 1 GallonElasta-Shield™, 4 Gallon KIT

Description

Specialty Coatings:Smooth Vinyl-Acrylic Protective Skin*

Stonewall™

Water-based, elastomeric coating. Allows definition to show . For either interior or exterior surfaces . Works well over EPS foam and other surfaces . Dries white . Can be brushed, rolled or sprayed . Covers 320 sq . ft . at 5 mils .

SWCSWC5

Item #Stonewall™ Foam Cutting, 1 GallonStonewall™ , 5 Gallon

Description

Texture Coatings:Stucco-Like Acrylic Finish*

*Coating NOT intended for use with EIFS

Theater Magic™

Add Water and Mix . Cementitious coating . Combination of Portland Cement, Polymers & Sand . For either interior or exterior surfaces .Developed for EPS foam . Dries white . Can be brushed, rolled or sprayed . Covers 50-60 sq . ft . at 1/8” to 3/16” .

TM50Item #

Theater Magic™ , 50# BucketDescription

Cement Texture:Cementitious Stucco Finish


331.800.325.7540

HARD COAT POLY-SPRAY 1™ SYSTEM

COATINGS

Polyurea Hardcoat*Poly-Spray 1™ System

• Environmentally Safe• Contains no VOC’s• Coating is Paintable• Color is Neutral• Dries in 7 Minutes at 70° • May be Painted After 7 Minutes• Six 750 ml Cartridges will Cover 127 Sq Ft. at 30 mils• 100% Solids, Two-component Aromatic PolyurethaneCompressor Requirements: Standard 5 hp compressor, with a 20 gallon tank capable of 10 to 12 CFM . For optimum performance, the supply pressure must be greater than 100 P .S .I . and less than 145 P .S .I . Protective clothing, eye-wear and breathing devices should be worn .

PS75KITPS75

PSGPSMT

Item # Description Cartridge, EachCartridge, Case of 6(Quantity Break at 4,8,12 & 36 Cases)Spray GunStatic Mixer w/ Atomizing Tip

Static Mixer w/ Air Atomizing Tip Comes w/ Each Cartridge

*Coating NOT intended for use with EIFS

POLY-SPRAY 1™ SYSTEM

PS75

PSMTEnvironmentally Safe Contains No VOC’s

Six 750 ml Cartridges will cover 127 Sq. Ft.

at 30 mils

2 Part Urethane*

US1KITUS1

Item # Description UreShell, 1 GallonUreShell, 4 Gallon Kit

UreShell™

UreShell is a marvelous hard coat, 2-part urethane-based coating . 20-25 minute working time allows for rolling or brushing . Applications cover both interior and exterior surfaces . It leaves a hard glossy smooth shell finish. It works great on props, backdrops, signs, molds, etc . One (1) gallon covers approximately 320 sq . feet at 5 mil thickness . Dries to a tan color and can be finish coated with most all paints and synthetic stucco .

2 Part Epoxy*

LR1KITLR1

Item # Description Liquid Rock, 1 GallonLiquid Rock, 4 Gallon Kit

Liquid Rock™

Liquid Rock is a 2-part epoxy-based coating that can be applied on interior and exterior surfaces . It has extraordinary flow characteristics. It leaves a hard glossy smooth shell finish. It works well on props and backdrops when a hard finish is preferred. It can be brushed or rolled . Average working time is 20-25 minutes . 1 gallon covers approximately 320 sq . feet at 5 mil thickness . Dries off-white and can be painted .


the Work Place .


DOW® SEALANTS / SPRAY FOAM

ENER

GY A

UDIT

Dow ® Froth-Pak ®Two Component Foam

Kit Includes:• ISO Can • Polyol Can • Spray Dispenser• Shoulder Strap w/ Assembly • 2 Cone Spray Nozzles

Froth-Pak ® 12, Great For Small Jobs 12 Board Feet, 1 Cubic Foot

DFRPKDFRPK12

Item # Single Kit / SealantCase of 12 Kits / Sealant

Description

Dow ® Froth-Pak ® 620

DFP620DFP620A

Item # Sealant Kit 620Insulation Kit 620 Class A Fired Rated

Description

Froth-Pak ® 620620 Board Feet, 56 Cubic FootKit Includes:• ISO A & B Cylinders • 8 Cone Spray Dispenser • 4 Fan Spray Nozzles • 15 ft. Gun Hose Assembly • Petroleum Jelly Packet

Dow ® Froth-Pak ® 200

Kit Includes:• ISO A & B Cylinders • 6 Cone Spray Nozzles • 4 GG Spray Nozzles • 9 ft Gun Hose Assembly

Froth-Pak ® 200 200 Board Feet, 16 Cubic Foot

DFP200DFP200A

Item # Single Kit 200Insulation Kit 200, Class A Fire Rated

Description

Great for Small Jobs


the Work Place .

351.800.325.7540

ENERFOAM™

ENERGY AUDIT

ICF Construction

Adhesive

SEALING

WEATHERPROOFING

• Performs as a Foam Adhesive and a Filler• Bonds Quickly to Almost Anything• One Can is Equal to 40 Quart Tubes

of Adhesive• Cures Initially in 10 Minutes• Polyurethane Based• 950 Lineal Feet at 1/2” Bead

EnerFoam™ 42Filler and Adhesive-In-One

• Same as Enerfoam™42 Except smaller Container

• Cures Initially in 10 Minutes

• Polyurethane Based

• 712 Lineal Feet at 1/2” Bead

• Controlled Dispensing

• No Gun Required . Straw Dispenser

• Same as Enerfoam™42 Except smaller Container

• Cures Initially in 10 Minutes

• Polyurethane Based

• 712 Lineal Feet at 1/2”Bead

EnerFoam™ 25Filler & Adhesive-In-One

EnerFoam™ 24Filler & Adhesive-In-One

ENER42KITENER42ENER25KITENER25ENER24KITENER24

Item #30 oz . EnerFoam Can30 oz . EnerFoam Cans (cs of 12) w/Gun*24 oz . EnerFoam Can24 oz EnerFoam Cans (cs of 12) w/Gun*24 oz . Straw EnerFoam Can24 oz . Cans (cs of 12)

Description

*with the Purchase of a Case of EnerFoam

42 or EnerFoam 25

FREEFGUN2

ENER42SK 42 Starter Kit

• 2 Cans of 30 oz . Enerfoam 42• 1 Pro Dispensing GunFGUN2• 1 Can of Enerfoam Cleaner

EnerFoam™ 42 Starter KitFiller and Adhesive-In-One

Item # DescriptionENER42JK 42 Junior Kit

• 6 Cans of 30 oz . Enerfoam 42• 1 Pro Dispensing GunFGUN2• 1 Can of Enerfoam Cleaner

EnerFoam™ 42 Junior KitFiller and Adhesive-In-One

Item # Description

EnerFoam™ 42 Master KitFiller and Adhesive-In-One

ENER42MK 42 Master Kit

• 12 Cans of 30 oz . Enerfoam 42• 1 Pro Dispensing GunFGUN2• 2 Cans of Enerfoam CleanerItem # Description


EPS ADHESIVES / GLUE

ADHE

SIVE

S

*Foam-Lok™ will perform as intended, however, your results could differ if you do not follow the directions . Also atmospheric conditions, temperature, and thickness of application may vary the results . We suggest a trial test be performed with each application to determine acceptable results .

Chemicals are Prohibited on all International and Domestic Air Shipments

Foam-Lok™ Adhesive

• Blue Tinted • Pour Into a Container and Brush it On• Same Great Holding Properties as Foam-Lok™ Spray• Covers Approximately 2000 sf. Per Container

FLA5BItem #

Foam Lok™ Adhesive 5 Gal . BrushableDescription

Brushable

Foam-Lok™ Adhesive, Gun & Hose

• Fast Setup Time: 5 Minutes*• Covers Approximately 3,500 sf. per container

FLA30Item #

30 Gallon Tank, Solvent BasedDescription

• Approx. Drying Time is 5-20 minutes*• Covers Approximately 4,400 sf. per container

Self Contained Pressurized Systems

FLGNFLAH

Item #Spray Gun NozzleSpray Gun Air Hose

Description

Foam-Lok™ Adhesive

• Adheres EPS to EPS • Fast Setup Time - 5 Minutes*• Clear Colored • Does Not Degrade the EPS• Covers Approximately 100 sf. per can

FLASKITFLAS

Item #Foam Lok™ Adhesive Spray 17 .25 ozFoam Lok™ Adhesive, per case of 12

Description

Anchor-in-a-Can

Water Based

Solvent Based

FLA30

FLGN

FLAH

371.800.325.7540

GLOVES / GLASSES / VESTS

SAFETY PRODUCTS

• Sleek, Contoured Design with Fully Adjustable Temples • Soft, Flexible, Universal-fit Nose Bridge Adds Comfort• Impact Resistant Polycarbonate Lens• Anti-fog Coating Protects Against Harmful UV Rays• Complies with ANSI, CSA, and Military High Velocity Impact Protection Standards• Individually Packaged, 10 Per Box

3M BX™ Safety GlassesPolycarbonate Safety Lens

S-GLItem #

Safety GlassesDescription

• Minimum 95% Filter Efficiency Against Solid and Non-oil Based Aerosol Particulates• Adjustable Noseclip with Foam Strip• Designed for Ease of Breathing• Protects Respiratory System While Grinding, Sanding, or Bagging• Not Recommended for Asbestos or Sandblasting Protection• NIOSH Approved

3M Disposable RespiratorParticulate Respirator

S-FACEMASKItem #

Disposable FacemasksDescription

• Hook and Loop Closure for Secure Fit• 2” 3M™ Scotchlite™ Stripes• Durable Knitted Material / Generous Fit • Can Be Washed Up To 25 Times Without Compromising Reflective Color Visibility• Meets FHWA Regulations

Traffic Safety VestReflective Material

S-VESTItem #

Safety VestDescription

• Open Mesh Assures Cooler Wear• Conforms to Back for Consistent Support• Double Hook & Loop Closure Provides Secure Fit while enhancing support • Includes 1 1/2” detachable suspenders with breakaway safety clips

Universal Back SupportFits 26”- 48” Waists

S-SUPPORTItem #

Back SupportDescription

Croc™ Cut Resistant Gloves12 per box

GLOVE-CR-12Item #

CrocTM GlovesDescription

• High Performance Kevlar ® with Stainless Steel Wire Core• Great for Changing Blades on Cutlas™ or Wintech Machines

Thermal Resistant GlovesZanray

GLOVE-THERMItem #

Thermal Resistant GlovesDescription

• Excellent with Extreme Heat Up To 660°F and Cold -40°F• Conforms to EN407:2004• For use with Badger™ Heat Densifiers

String/Leather Palm Work Gloves12 per box

GLOVE-LP-12Item #

Leather Palm GlovesDescription

• Suede Leather Palm and Fingers• String Knit Back• Breathable, Lightweight & Flexible

• Additional Glove Styles Available Online


23”

Ultra -Sharp Serrated Single-Edge Blade

Ultra-Sharp Serrated Double-Edge BladePUSAW36

Soft Polyurethane Saw Pneumatic Hand-held Saw

• Designed for Soft Urethane 1/2 Pound Insulation• Ultra Sharp Blade Cuts Quickly• Free Speed of 3,000 RPMs• Requires 8 CFM @ 93 PSI • Weighs Just 7 Pounds • Blade Length Past Tool - 23”• Powered by IngersollRand® Straight Line Sander• 1 1/4” Blade Travel

PUSAW36PUBLADE36PUBLADE36DE

Item #Polyurethane Saw - Includes BladeReplacement BladeDouble-Edge Replacement Blade

Description

Air Hose and Connections Not Included

Soft Spray-Foam SawElectric Hand-held Saw• Designed for Soft Urethane 1/2 Pound Insulation• Ultra Sharp Blade Cuts Quickly• Free Speed of 3,000 RPMs • Weighs Just 10 Pounds • Blade Length Past Tool - 29”• 1 1/4” Blade Travel

PUSAWEPUBLADE29

Item #Polyurethane Saw - Includes BladeReplacement Blade

DescriptionPUSAWE

SOFT SAWS

FOAM

SAW

S

PUSAW29

29” Blade

PUSAW11

11” Blade Polyurethane Saws11” & 29” Hand SawsFor 1/2 Pound Soft Foam

PUSAW11PUSAW29

Item #Polyurethane Hand SawPolyurethane Hand Saw

Description

Ultra-Sharp Serrated Blade

like thePneumaticSaw Above


the Work Place .

391.800.325.7540

POLY PLANERS

FOAM PLANES

• Specialized Cutters for 1/2 lb -10+ lb Foam• Heavy-Duty Commercial Quality • 16” Model Weighs Just 13.2 Pounds • 24” Model Weighs 17.5 Pounds

• Replacement Brushes and Blades Available• Rugged Air Motor and Electric Motor• Fafnir Ball Bearings on Cutter Shafts• Air Motors Require 23 CFM @ 125 PSI

Air Motor —Soft Wire* for 1/2 Lb or Hard Wire* for 2 Lb +.

*Specify Soft or Hard Wire

PUP216A*PUP224A*

Item #16” Poly-Plane 2™ Air24” Poly-Plane 2™ Air

Description

Air Motor —Carbide Blades for Up to 10+ Lb. Foam.

PUP216ACPUP224AC

Item #16” Poly-Plane 2™ Air Carbide24” Poly-Plane 2™ Air Carbide

Description

Models -1/2 thru 10+ Pound FoamFor Open Cell or Closed Cell2

PUPGPMItem #

Grinding PlateDescription

Spray Foam GrinderPneumatic Grinding PlateThe pneumatic motor operates most efficiently when air pressure is maintained at 125 PSI . An air compressor able to deliver 23 .0 CFM is necessary . Incoming air should be dry, clean and filtered. We recommend using a ¾” line from the compressor, the last 20’ use a ½” airline . Lubricate the tool at least once every 8 hours by pouring a small quantity of air motor oil through the air inlet .

PUPGPM

• Virtually Unbreakable Steel Blade• Available in 16” and 24” Models• Requires 23 CFM @ 87-90 PSI• 16” Model Weighs Just 12.5 Pounds

• Designed to Cut Hard 2 Pound Foam• Rugged Air Motor and Dual Safety Switches• 24 Model Weighs 14.5 lbs.

Hard Polyurethane PlanerPneumatic Hand-held Saw

PUP16 PUP24

Item #16’ Poly-Plane24’ Poly-Plane

Description

All Aluminum Construction

Unless Both Start Buttons Are Depressed Simultaneously, the Poly-Plane™ Will Not Start

Solid, Tool Hardened Steel Blade Provides Excellent Wear Characteristics

Beveled Blade Edge to Provide Positive Cutting While Reducing Blade Drag

Guard Helps Keep Foam Chips Away from Operator

2 Safety Blocks to Prevent Accidental Start-Up

Powerful and Rugged .85 HP Air Motor uses Maximum 33.0 CFM @ 90 PSI

1055 Nine North Drive • Alpharetta GA 30004 • USA

How We Got Here

AutomobileCold storageConcreteConstruction FurnitureHobbyWaste Management

INDUSTRIES SERVED

Styrocut15™Sidewinder™Hot Knife CR™ CutRite™DuraRasp™Cutlas™ Cutters Badger™ Recyclers Megaplot Wintech

FEATURED PRODUCTS

DEMAND ENTERS THE SOLUTION BUSINESSIn 1981, I began searching for ways to cut foam on the job site . By 1983 I had the answer, developing the first ever job site foam cutting machine, The StyroCut15. Excitement from customers encouraged me to start Demand Products and further my quest to provide solutions for other foam cutting tools and machines . The StyroCut15 continues to rank high on customer’s lists as the number one choice for a job site, foam cutting and shaping machine . It continues as a stalwart in our catalog today . I didn’t know it then, but in time, Demand Products would become the largest source in the world for foam cutting devices and hundreds of foam related items .

POLYURETHANE CUTTING MACHINESAlong the way we received calls asking if we had equipment for cutting and shaping Polyurethane foam . In early 2000 we added Polyurethane cutting machines to our line . Today we proudly keep the most popular models on our showroom floor and have hosted clients from over 42 countries for demonstrations .

RECYCLING MACHINESYou can’t be involved in cutting and shaping foam as long as we have without the question coming up; “what about recycling my foam?” . We listened to the experts and now offer the most comprehensively tested and proven foam recycling machines on the planet .

Providing a solution for problems has served us well . We look forward to continuing to develop and offer the most innovative foam cutting and handling tools, equipment and products for years to come .

Doug Hill President and Founder

Documents

PRODUCT INDEX...made within 15 days of invoice . Materials returned must be shipped prepaid . Discontinued items, custom orders or items that have been out of our factory for 3 months