Product Handbook - JSW · PDF fileProcess Flow – Salem Works (Long Products – Special Steels) ... Product Handbook JSW STEEL Vision Global recognition for Quality and efficiency

Steel

ProductHandbook

speed

technology

expertise

environment

lasting

Hot Rolled 13

Cold Rolled Closed Annealed 47

Galvanised 57

Galvalume 77

Pre-Painted Galvanised 87

Pre-Painted Galvalume 91

TMT Bars 95

Wire Rods, Bars & Spring Steel Flats 99

JSW Steel Main Products

JSW Steel

JSW Energy

JSoft Solutions

JSW Mines

Corp. Office

Other Offices

JSW Infrastructure

Global Offices

Global Presence

JSW Steel

JSW Energy

JSoft Solutions

JSW Mines

Corp. Office

Other Offices

JSW Infrastructure

Global Offices

About JSW Steel .....................................................................................................................................................................1 Vission, Mission & Core Values ..............................................................................................................................................2 JSW’s Spirit ........................................................................................................................................................................3 - 4 JSW Steel’s Milestones .................................................................................................................................................... 5 - 6 JSW Steel – Highlights .................................................................................................................................................... 7 - 8 Process Flow – Vijayanagar Works (Flat & Long Products) ...................................................................................................9 Process Flow – Vasind/Tarapur Works (Galvanising & Colour Coating) ..............................................................................10 Process Flow – Salem Works (Long Products – Special Steels) .........................................................................................11 JSW Shoppe & Product Range .............................................................................................................................................12

HOT ROLLED COILS - Specifications ...............................................................................................................................................................15 - Product Range .......................................................................................................................................................16 - 18 - Dimensional Tolerances ........................................................................................................................................19 - 20

HOT ROLLED COILS FOR VARIOUS APPLICATIONS - Cold Rolling & Galvanising ................................................................................................................................... 21 – 22 - Drawing & Press Forming .................................................................................................................................... 23 – 26 - Electrical Stampings & Forming .......................................................................................................................... 25 – 26 - Welded Tubes & Pipes .......................................................................................................................................... 27 – 28 - Line Pipes ............................................................................................................................................................. 27 – 28 - Structural & General Engineering ....................................................................................................................... 29 – 30 - High Tensile Structural Applications ................................................................................................................... 31 – 32 - Chequered Sheets & Plates for Structural Use ................................................................................................... 31 – 32 - HSLA Grade for Automobile & Other Engineering Applications .......................................................................... 33 – 34 - Simple Pressure Vessels ...................................................................................................................................... 35 – 36 - Boiler Tubes & Pressure Vessels ......................................................................................................................... 35 – 36 - Medium Carbon Un-alloyed Grades ..................................................................................................................... 37 – 38 - Atmospheric Corrosion Resistance & Other Chromium Alloyed .........................................................................39 - 40

HOT ROLLED PLATES - Dimensions & Tolerances ............................................................................................................................................42

HOT ROLLED PICKLED & OILED (HRPO) / SKIN PASSED, PICKLED & OILED (HRSPO) - Dimensions & Tolerances ............................................................................................................................................44

HOT ROLLED PRODUCTS – SERVICE CENTRE - Service Centre ..............................................................................................................................................................46

COLD ROLLED CLOSED ANNEALED - Grades & Standards .....................................................................................................................................................49 - Mechanical Properties ................................................................................................................................................50 - Product Range .......................................................................................................................................................51 - 53 - Shape & Dimensional Tolerances .........................................................................................................................54 - 55 - Service Centre ..............................................................................................................................................................56 - Packing ......................................................................................................................................................................56

GALVANISED - Product Range & Specifications ............................................................................................................................59 - 60 - Soft (Commercial, Forming, Drawing) ..................................................................................................................61 - 62 - Structural ..............................................................................................................................................................63 - 64 - Bundle Weight Chart .............................................................................................................................................65 - 66

TABLE OF CONTENTS

GALVANISED CORRUGATED - Product Range & Specifications ...................................................................................................................................68 - Bundle Weight Chart .............................................................................................................................................69 - 70 - Weight Per Piece Chart .........................................................................................................................................71 - 74 - Packing ...............................................................................................................................................................75 - 76

GALVALUME - Product Range & Specifications ...................................................................................................................................79 - 55% Aluminium – Zinc Coated Alloyed Steel – Corrugated Sheets.............................................................................80 - Soft (Commercial, Forming, Drawing) ..................................................................................................................81 - 82 - Structural ..............................................................................................................................................................83 - 84 - Packing ...............................................................................................................................................................85 - 86

PRE–PAINTED GALVANISED - Specifications ...............................................................................................................................................................89 - Profile Range ................................................................................................................................................................90

PRE – PAINTED GALVALUME - Specifications ...............................................................................................................................................................93 - Profile Range ................................................................................................................................................................94

TMT BARS - Properties .....................................................................................................................................................................97 - Product Range & Nominal Weight ...............................................................................................................................98

WIRE RODS, BARS & SPRING STEEL FLATS - Metallurgical & Mechanical Properties ..................................................................................................................... 101 - Product Range & Nominal Weight ............................................................................................................................. 102 - Cold Heading Quality – Wire Rods & Bars ....................................................................................................... 103 – 104 - Low Alloy Steel – Wire Rods & Bars ................................................................................................................ 105 – 106 - Forging Quality – Wire Rods & Bars ................................................................................................................. 107 – 108 - High Carbon – Wire Rods ........................................................................................................................................... 109 - Free Cutting Steel – Wire Rods & Bars ...................................................................................................................... 110 - Welding Electrode Quality – Wire Rods ...................................................................................................................... 110 - File Steel – Wire Rods & Bars .................................................................................................................................... 110 - Spring Steel Flats ............................................................................................................................................. 111 – 112 - Seamless Boiler Quality Grade – Bars ............................................................................................................. 111 – 112

About JSW SteelIndia’s fastest growing integrated steel company

• HeadquarteredinMumbai,Maharashtra.

• IntegratedSteelManufacturingfacility inToranagallu (Karnataka, India);Value-AddedProduct

unitsinVasind&Tarapur(Maharashtra,India),SpecialSteelsunitatSalem(TamilNadu,India).

• TheCompanyhasfurtheracquiredmajoritystakeinISPATIndustriesLtd.(nowJSWISPAT),with

manufacturingfacilitiesatDolvi&KalmeshwarinMaharashtra,India.

• StrategicCollaborationAgreementwithJfeSteelCorporation,JapanformanufacturingofHigh

GradeAutomotiveSteel.

• Joint Venture Agreement with Marubeni - Itochu Steel Inc. Tokyo, (MISI), Japan to set up

state-of-the-artSteelProcessingCentresinIndia.

• establishedastrongpresenceintheGlobalValue–AddedSegmentwiththeacquisitionofSteel

MillinUS.JSWSteelhasalsoformedaJointVentureforsettingupaSteelPlantinGeorgia.

• TheGrouphasalsoacquiredMiningAssetsinChile,USAandMozambique.

• Over130NationMarketingfootprint;WideDomesticRetailfootprint.

JSWGroup–aUS$9billionenterpriseandapartofO.P.JindalGroup,isadynamicintegratedentitywithitspresence

acrossvarioussectors-Steel,energy,Infrastructure,Mining,Cement,AluminiumandIT. Inashortspan,ithasbecome

oneoftheleadingbusinesshousesinIndia.JSWSteelandJSWISPATcombinedisnowtheLargestSteelmakerbycapacity

(14.3milliontonnesperannum)inIndia.

1

VijayanagarWorks

Product Handbook JSW STEELProduct Handbook JSW STEEL

Vision

GlobalrecognitionforQualityandefficiency

whilenurturingnatureandsociety.

Core Values

• Transparency

• Striveforexcellence

• Dynamism

• PassionforLearning

Mission

SupportingIndia’sgrowthinsteeldomain

withspeedandinnovation.

At JSW Steel, we have committed ourselves to small acts that change the world around us resulting in a sequence of never ending excellence.

Vision, Mission & Core Values

2

JSW Steel’s Spirit

Speed Passion Innovation

Reachthezenithofourindustrywithintheshortestpossibletime

focusonmultiple-nationandmulti-productfootprint

Commitmenttoraisetheglobalbenchmark

StabilisedoperationsofIndia’slargestblast furnace in only three months;highest daily production of 8,337tonnesachievedinJanuary2010.

Add the fourth blast furnace(3.2MTPAsteel-makingcapacity)with-in only 24 months of commissioningthethird;alsocommission India’s larg-estsinter-makingunitinfY2010-11.

TomanufacturesomeofnicheCRCAproductsforthefirsttimeinIndia.

Manufactured an average 20,000tonnespermonthofhighvalue-addedsteel(APIX-70gradesteel)fortheoilaandgaspipelinesector,forthefirsttimeinIndia.

Introducedsevenpredictivemodelsasproactiveanalysisofequipmentperfor-mance and product quality, and filedcopyrightsforsixmodels;anotherfirstintheIndiansteelsector.

Adopt technology, systems and op-erationalprocessesof globalpeerstoreduce natural resource consumptionsignificantly.

3


Returns Investment Technology

Derivemorefromless enrichingthecommunity,touchinglives

Knowledgerepositorycatalysingpioneeringachievements

Improved utilisation of Coke Ovengasfrom84%in2008-09to96%plusin2009-10forpowergenerationandthe steel-making processes at Vijay-anagarworks.

Achieve85%gasutilisationfromBlastfurnace3.

Creatingagreenfieldsteelfacility(10MTPA)inWestBengal,whichisinturnexpected to generate employmentforabout4,200individuals.

JSW foundation touched the livesof2.5lacindividualsaspartofitssocialresponsibilityinitiatives.

CommissionedIndia’swidesthotstripmill, which can roll products up to2,100mmwidth.

establish a state-of-the-art beneficia-tionunittoupgradepoorironorevari-etiesforiron-making.

4

JSW Steel’s JourneyTheGroupsetupitsfirststeelplantin1982atVasindnearMumbai.Soonafter,itacquiredPiramalSteelLimited,which

operatedaministeelmillatTarapurinMaharashtra.TheJindals,whohadwideexperienceinthesteelindustry,renamed

itasJindalIronandSteelCo.Limited(JISCO).In1994,inordertoachievethevisionofmovingupthevaluechainand

buildingastrong,resilientcompany,JindalVijayanagarSteelLimited(JVSL)wassetup,withitsplantlocatedatToranagallu

intheBellary-HospetareaofKarnataka,theheartofthehigh-gradeironorebeltandspreadover3,700acresofland.Itis

just340kmsfromBangalore,andiswellconnectedwithboththeGoaandChennaiports.In2005,JISCOandJVSLmerged

toformJSWSteelLtd.

JSW Steel’s MilestonesJSWSteel,overtheyears,grewinleapsandbounds.Throughexercisingthesameforesightthathasbecomeaprincipal

businessstrategytoday.

5

enhancedsteelmakingcapacityto3.8MTPA

2006AchievedintegrationfromPelletstoHRC(1.6MTPA)

2002CommissionedHSM-I(3.0MTPA)

1997

Commissionedthesteelplant(0.8MTPA)

1999• enhancedsteelmakingcapacityto2.5MTPA

• CommissionedColorCoatinglineatTarapur

2005• CommissionedCRMof1.0MTPA

• AcquiredPlateandPipeMillintheU.S,1.0MTPAlongproductsunitinTamilNaduandCoalminesinMozam-bique

2007


TheCompanyrecentlyacquiredmajoritystakein ISPATIndustriesLtd.(nowJSWISPATSteelLtd.),withmanufacturing

facilitiesatDolvi&KalmeshwarinMaharashtra,India.

IthasalsoenteredintoastrategiccollaborationagreementwithJfeSteelCorporation,Japanforthedevelopmentand

manufactureofHigh–endAutomotiveSteel.JSWSteelhasalsoenteredintoaJointVentureAgreementwithMarubeni–

ItochuSteelInc.,Tokyo,(MISI)toset-upstate-of-the-artsteelprocessingcentersinIndia.

By 2020, the Companywould be producing 40million tons of steel annuallywithGreenfield integrated steel plants

comingupinWestBengalandJharkhand.

6

• IronoreminesacquiredinChile

• Galvalumelinesetup

2008Commissionedstate-of-the-artHSM-II(3.5MTPA,Phase-I)

2010

enhancedsteelmakingcapacityto7.8MTPA

2009Commissioned

Blastfurnace-IV (3.2MTPA)LargestBlastfurnaceinIndia

2011

JSW Steel – Highlights• Primary Producer-JSWSteelLtd.isaPrimaryandMainProducerofsteel.

• Largest Steelmaker-JSWSteelandJSWISPATSteelcombinedisnowtheLargestSteelmakerbycapacity(14.3MTPA)inIndia.

• India’s Largest Integrated Steel Plant - 10 Million Tonnes Per Annum Capacity at a SingleLocationatVijayanagar.

• Green Steel-OnlyplantinthecountrywithZero Effluentdischarge.1.2MilliontreesplantedatVijayanagarWorksinjust12years.

• India’s Largest Blast Furnace-3.2MTPAatVijayanagar.

• India’smostmodernandLargest Vertical Caster -300/260/220x2200mm.

• Widest Hot Strip Mill in India-25.4x2150xCoil(mm)-36T(max.)designedtoproduceAPI5LGrX-80(PSL-2)...PhaseI-3.5MTPAandPhaseII-5MTPA.

• StateoftheArt1650mmwideCold Rolling Mill –Capacity1MTPA.

• India's Largest Coated Steel producer(0.9MTPA).

• India’s Largest Exporter of Galvanized steelwithexportstoover130countries.

• First Licensee Galvalume producer in IndiaunderatechnologylicensingfromBIeCInternationalInc.,USA.

• India’s Largest Integrated Special Steel Plant at Salem Workswith1MTPAcapacityforLongProducts.

• India’sonlymulti-radiiBloom Caster(12/16/30mtr.)atSalemWorks.

8

Process Flow

Vijayanagar Works

VijayanagarWorksoneofthefirstSteelPlantsintheworldto have successfully used Corex technology to produceHotMetal. In feb. 2009, VijayanagarWorks achieved 6.8MTPA. In July 2011, it has further expanded to10MTPA,thusmakingittheLargestIntegratedSteelPlantatasinglelocationinIndia.

It'seco-friendlyapproachhasalsoledtothedevelopmentof Vijayanagar into a modern township. enveloped byacres of greenery andmaintainedby JSW,Vijayanagar isprosperingbyleapsandbounds.

9 HSM

CRM

Non - coking coal Coking coalIron ore Fluxes

Coke oven

Converter LHF, RH Slab Caster

Sintering

HMPT

Pelletization

Beneficiation

Corex Blast furnace

VIJAYANAGAR WORKS (FLAT & LONG PRODUCTS)

Converter Slab Caster

Billet Caster

Blast Furnace

Cold rolling millPickling line

Hot Strip Mill

WRM / BRM

SinteringCoke Oven

Corex

LHF, RHHMPT

FluxesNon-Coking Coal Iron Ore Coking Coal

ConverterSlab Caster

Billet Caster

Blast Furnace

Cold rolling mill

Pickling line

Hot Strip Mill

WRM

/ BRM

SinteringCoke O

ven

Corex

LHF, RH

HM

PT

FluxesN

on-Coking CoalIron O

reCoking Coal

Converter Slab Caster

Billet Caster

Blast Furnace

Cold rolling millPickling line

Hot Strip Mill

WRM / BRM

SinteringCoke Oven

Corex

LHF, RHHMPT

FluxesNon-Coking Coal Iron Ore Coking Coal


Process Flow

Vasind and Tarapur Works

ThetotalcapacityofVasindandTarapurWorksis0.9MTPAofGalvanised,Galvalume&ColourCoatedproducts.

Apart frombeinga leadingmanufacturerof cold rolledandcolor coated steel,Tarapur andVasindworks is today India’sbiggest producer & largest exporter of galvanized steel. AtVasindWorks, theCompanyalsomanufacturesGALVALUMe,a revolutionary product in the steel industry. Its strategiclocation,withaccesstothemajorportsofMumbai,marketsandrawmaterialsourceshasworkedtoitsadvantage.

VASIND/TARAPUR WORKS (GALVANISING & COLOUR COATING)

10

HR Slitter CR Trimming lineCold rolling millPickling line

Tension leveler

Chemical treatmentDelivery looper Tension reel

Oiler

Surfaceinspection

Annealing furnace

Zinc pot

Coat

ing

wei

ght c

ontr

ol

Water coolingSkinpass mill

Air cooling

Spangle equipment

Alloying equipment

Coating weight measurement

Pay o� reel

Welder

Entry looper

Cut to length Machine / Corrugation / Pro�ling MachineColour Coating Line

Process Flow

Salem Works

SalemWorks is the Largest Integrated Special Steel Plant inIndiawithacapacityof1MTPA.ItislocatedinthestateofTamilNaduatPottaneriabout35kms.fromSalem.

It has adopted the Sinter plant – Blast furnace – energyOptimising furnace – Ladle furnace, Vacuum DegassingContinuousCastingMachine–barandrodmillroutewithironoreasthebasicinputmaterial.Italsohasplantsforgenerationofpowerandproductionofoxygen.

Products of Salem Works have the hallmark of quality andcombinedwithcompetitivepricing,theyarehighlypreferredinautomobileandconstructionsectors.

SALEM WORKS (LONG PRODUCTS - SPECIAL STEELS)

RAW MATERIALTRANSPORTCONVEYOR

Raw Material

Ground Hopper

Raw MaterialTransportConveyor

Skip Carfor BF

BF - Day Bin

Blast Furnace EnergyOptimizingFurnace

SecondaryRefining (LF + VD)

ContinuousCasting Machine

BloomingMill

BRM

SinteredMaterialStorage Bin

SinterPlant-RawMaterial Bin

11 Billet / Bloom Caster

Blooming Mill

WRM / BRM

SinteringCoke Oven

LHFEnergy Optimizing Furnace

Coking Coal Iron Ore Fluxes

Blast Furnace

Billet / Bloom Caster

Blooming Mill

WRM / BRM

SinteringCoke Oven



Blast Furnace

Billet / Bloom Caster

Blooming Mill

WRM / BRM

SinteringCoke Oven



Blast Furnace

Product Handbook JSW STEEL

JSW Shoppe & Product RangeJSW Steel Ltd. has set up retail outlets called “JSW Shoppes”. It is a novel initiative be the company the aim of which is to offer steel solutions to the discerning customers pan India and to create a unique shopping experience for steel buying.

JSW Shoppe is an exclusive steel outlet of the company and has on display and sale all the products of JSW Steel ranging from hot rolled to colour coated steels along with long products.

JSW Shoppe is an effort to create a customer friendly ambience. Customers can have a “touch & feel experience” of the complete product range of JSW Steel. This interface with the customer has resulted in creating a strong relationship based on trust and reliability with JSW Steel. At JSW Shoppe a customer can get “everything in steel under one roof”.

This also helps to create brand awareness about JSW Steels superior product quality and ensures that the customers get full value for money. JSW Shoppe offers the customers a variety of “Quality products at honest prices”.

JSW Steel - Product Range

HotRolledCoils/Plates/Sheets TMTBars

ColdRolledClosedAnnealedCoils/Sheets WireRods

GalvanisedCoils/Sheets/Profiles SpecialSteels

GalvalumeCoils/Sheets/Profiles RCS

PrePaintedGalvanisedCoils/Sheets/Profiles Rounds

PrePaintedGalvalumeCoils/Sheets/Profiles SpringSteelflats

G. C. SHEETS

12

Naye Bharat Ki Buniyaad

Hot Rolled Coils

Hot R

olled Coils

15

Product Specifications

Grades Re-rolling/ Drawing Grades,Tube and Pipe/ Forming Grades,Structural/ Medium Tensile Tube/ Forming Grades,LPG/ Low Pressure Vessel Grades,HSLA Grades,Medium Carbon Grades, Weather Resistance Grades,Line Pipe Grades,Chequered Plates

Thickness (mm) 1.50 to 25.4

Width (mm) 900 - 2150

UTS (MPa) As per standards

HSM Facilities 6 Stand, 4Hi tandem mill

Physical Parameter

Parameter Remarks

Coil ID 762 (+/- 30) mm

Coil OD 2000 mm max

Edge Mill edge

Width Tolerance - 0 / + 20 mm for 95% of coil length (for balance 5% in Head end and + 25 mm max in tail end).

Thickness Tolerance Upto 6 mm thickness 2/3 rd EN 10051 guaranteed for 95% coil length or 1/2 EN 10051 guaranteed for 90% of coil length (full EN 10051 for balance length).

For > 6 mm thickness 6% of thickness is acceptable in total tolerance for 95% of coil length (i.e. ~ 1/2 EN 10051). Balance coil length is full EN 10051.

Specific Weight 14 - 18.5 kg/mm of width or as per agreement (18.5 kg/mm max).

Telescopicity 50 mm max. for Thickness upto 5 mm and 70 mm max. for > 5 - 12 mm thickness, except 2 - 3 ID/OD wraps.

Tongue/Fish Tail 800 mm max. (500 mm - HE, 500 mm - TE).

Camber 20 mm max. in any 5000 mm length, except head end and tail end 5% length.

Packing 1 - 2 circumferential and 2 - 4 bands through the eye or as agreed.

Documents/Markings Metric system as standard. Imperial system for dimension and weight can be accepted for specific cases.

Specifications


Hot

Rol

led

Coils

16

Product Range

26.0

24.0

22.0

20.0

18.0

16.0

Thic

knes

s (m

m)

Width (mm)

(‘25.4xw900)

(‘1.6xw900) (‘1.6xw1250)

(‘3.2xw2150)

(‘25.4xw2150)

14.0

12.0

10.0

8.0

6.0

4.0

2.0

0.0800 1000 1200 1400 1600 1800 2000 2200

UTS 410 MPa Max.

Hot R

olled Coils

(‘25.4xw900) (‘25.4xw2000)

(‘22.0xw2150)

(‘5.5xw2150)

(‘2.0xw1250)(‘2.0xw900)

Product Range

17

UTS 410 - 620 MPa Max.

26.0

24.0

22.0

20.0

18.0

16.0

Thic

knes

s (m

m)

Width (mm)

14.0

12.0

10.0

8.0

6.0

4.0

2.0

0.0800 1000 1200 1400 1600 1800 2000 2200


Hot

Rol

led

Coils

18

(‘6.0xw900) (‘6.0xw2150)

(‘16.0xw2150)

(‘19.0xw2150)

(‘20.0xw1600)(‘20.0xw900)

(‘25.4xw900) (‘25.4xw1600)

[x-80]

[Upto x-70]

API Grade

26.0

24.0

22.0

20.0

18.0

16.0

Thic

knes

s (m

m)

Width (mm)

14.0

12.0

10.0

8.0

6.0

4.0

2.0

0.0800 1000 1200 1400 1600 1800 2000 2200

Hot R

olled Coils

19

Dimensional TolerancesA. ThickneSS ToleRAnceS

As Per iS 1852:1985

nominal Thickness (mm) Permissible Deviations in Thickness for nominal Width (mm)

From To <=1250 >1250, <=1550 >1550, <= 1850 >1850

>1.6 ≤2.0 (+/-) 0.18 (+/-) 0.20 (+/-) 0.22 -

>2.0 ≤3.0 (+/-) 0.20 (+/-) 0.25 (+/-) 0.28 (+/-) 0.28

>3.0 ≤5.0 (+/-) 0.25 (+/-) 0.30 (+/-) 0.35 (+/-) 0.35

>5.0 ≤8.0 (+/-) 0.30 (+/-) 0.35 (+/-) 0.40 (+/-) 0.40

>8.0 ≤10.0 (+/-) 0.35 (+/-) 0.40 (+/-) 0.40 (+/-) 0.40

Note: Tolerances on thickness of strips exceeding 10 mm, shall be agreed between the purchaser and the supplier.

As Per JiS G 3193


From To <1600 >=1600, < 2000 >=2000 < 2500

- < 1.25 (+/-) 0.16 - -

≥1.25 <1.6 (+/-) 0.18 - -

≥1.6 <2.0 (+/-) 0.19 (+/-) 0.23 -

≥2.0 <2.5 (+/-) 0.20 (+/-) 0.25 -

≥2.5 <3.15 (+/-) 0.22 (+/-) 0.29 (+/-) 0.29

≥3.15 <4.0 (+/-) 0.24 (+/-) 0.34 (+/-) 0.34

≥4.0 <5.0 (+/-) 0.45 (+/-) 0.55 (+/-) 0.55

≥5.0 <6.3 (+/-) 0.50 (+/-) 0.60 (+/-) 0.60

≥6.3 <10.0 (+/-) 0.55 (+/-) 0.65 (+/-) 0.65

≥10.0 <16.0 (+/-) 0.55 (+/-) 0.65 (+/-) 0.65

≥16.0 <25.0 (+/-) 0.65 (+/-) 0.75 (+/-) 0.75

≥25.0 <40.0 (+/-) 0.70 (+/-) 0.80 (+/-) 0.80

As Per en 10051:1991


From To <=1200 >1200 ≤1500 >1500 ≤1800 >1800

- ≤2.0 (+/-) 0.17 (+/-) 0.19 (+/-) 0.21 -

>2.0 ≤2.5 (+/-) 0.18 (+/-) 0.21 (+/-) 0.23 (+/-) 0.25

>2.5 ≤3.0 (+/-) 0.20 (+/-) 0.22 (+/-) 0.24 (+/-) 0.26

>3.0 ≤4.0 (+/-) 0.22 (+/-) 0.24 (+/-) 0.26 (+/-) 0.27

>4.0 ≤5.0 (+/-) 0.24 (+/-) 0.26 (+/-) 0.28 (+/-) 0.29

>5.0 ≤6.0 (+/-) 0.26 (+/-) 0.28 (+/-) 0.29 (+/-) 0.31

>6.0 ≤8.0 (+/-) 0.29 (+/-) 0.30 (+/-) 0.31 (+/-) 0.35

>8.0 ≤10.0 (+/-) 0.32 (+/-) 0.33 (+/-) 0.34 (+/-) 0.40

>10.0 ≤12.5 (+/-) 0.35 (+/-) 0.36 (+/-) 0.37 (+/-) 0.43

>12.5 ≤15.0 (+/-) 0.37 (+/-) 0.38 (+/-) 0.40 (+/-) 0.46

>15.0 ≤25.0 (+/-) 0.40 (+/-) 0.42 (+/-) 0.45 (+/-) 0.50


Hot

Rol

led

Coils

20

ReSTRicTeD ThickneSS ToleRAnce (When AGReeD AnD APPlicAble FoR 95% coil lenGTh only)

Thickness Range 1.6 - 2.0 2.1 - 2.9 3.0 - 4.0 4.0 - 5.0 6.0 - 8.0

Low C / Low Tensile ± 0.10 ± 0.10 ± 0.15 ± 0.15 ± 0.20

Medium C / High Tensile / HSLA ± 0.15 ± 0.15 ± 0.20 ± 0.20 ± 0.25

b. WiDTh ToleRAnce AS PeR en 10051:1991

nominal Width (mm) Deviation (mm)

lower Upper

≤ 1200 0 20

>1200, ≤ 1500 0 20

>1500 0 25

c. FlATneSS ToleRAnce AS PeR en 10051:1991

nominal Thickness (mm) nominal Width (mm)

Standard Tolerance

(mm)

Special Tolerance

(mm)

≤ 2.0 ≤ 1200 18 9

>1200 ≤ 1500 20 10

>1500 25 13

>2.0, ≤ 25.0 ≤ 1200 15 8

>1200 ≤ 1500 18 9

>1500 23 12

Hot R

olled Coils

21

JSW Grade Dimensional Scope equivalent international / biS Grades Thickness

(mm)Width(mm)

BIS JIS EN SAE / ASTM Others

JVCR02, JVGL02

1.6-2.0 2.0-3.2 3.2-8.0

900-1250 900-1500 900-2050

IS:11513Gr. O

- EN1011 DD11

- -

JVCRT2 1.6-3.2 3.2-8.0

900-1250 900-2050

- - - SAE 1010(M) -

JVCR04, JVGL04

1.6-2.0 2.0-3.2 3.2-8.0

900-1250 900-1500900-2050

IS:11513Gr. D

G 3131 SPHC EN1011 DD12

- -

JVCRM4 1.6-2.0 2.0-3.2 3.2-8.0

900-1250 900-1500 900-2050

IS:11513Gr. D

G 3131 SPHD EN10111 DD12

SAE 1008(M) Customized

JVGL05 1.6-2.0 2.0-3.2 3.2-8.0

900-1250 900-1500 900-2050

IS:11513Gr. DD

G 3131 SPHD EN10111 DD12

SAE 1006(M) -

JVCRM5 1.6-2.0 2.0-3.2 3.2-8.0

900-1250 900-1500 900-2050

IS:11513Gr. D (M)

G 3131 SPHD (M)

EN10111 DD12


JVCR06, JVGL06

1.6-2.0 2.0-3.2 3.2-8.0

900-1250900-1500 900-2050

IS:11513Gr. DD

G 3131 SPHD EN1011 DD13

SAE 1006(M) -

JVGLC6 1.6-2.0 2.0-3.2 3.2-8.0

900-1250 900-1500 900-2050

IS:11513Gr. DD

G 3131 SPHD EN1011 DD13

SAE 1006(M) -

JVCRM6 1.6-2.0 2.0-3.2 3.2-8.0

900-1250 900-1500 900-2050

IS:11513Gr. DD

G 3131 SPHD EN 10111 DD14


JVGLB6 1.6-2.0 2.0-3.2 3.2-8.0

900-1250900-1500900-2050

IS:11513Gr. EDD(M)

G 3131 SPHD G 3131 SPHE

- SAE 1006(M) B treated

JVGLE6 1.6-2.0 2.0-3.2 3.2-8.0

900-1250 900-1500 900-2050

IS:11513Gr. DD

G 3131 SPHD EN1011 DD14

SAE 1006(M) -

JVGLH6 1.6-2.0 2.0-3.2 3.2-8.0

900-1250900-1500900-2050

IS:11513Gr. DD

G 3131 SPHC(M)

- SAE 1006(M) Customized

JVGLS6 1.6-2.0 2.0-3.2 3.2-8.0

900-1250 900-1500 900-2050

IS:11513Gr. DD

G 3131 SPHD EN1011 DD14

SAE 1006(M) -

JVCRB6 1.6-2.0 2.0-3.2 3.2-8.0

900-1250900-1500900-1850

IS:11513Gr. EDD(M)

G 3131 SPHD G 3131 SPHE

- SAE 1006(M) B treated

JVCRV6 1.6-2.0 2.0-3.2 3.2-8.0

900-1250900-1500 900-2050

IS:11513Gr. EDD

(Spl./Critical)

G 3131 SPHE EN 10111 DD14

SAE 1006(M) -

JVGLR6 1.6-2.0 2.0-3.2 3.2-8.0

900-1250900-1500900-2050

IS:11513Gr. EDD

G 3131 SPHE - SAE 1006(M) -

JVGLV6 1.6-2.0 2.0-3.2 3.2-8.0

900-1250900-1500900-2050

IS:11513Gr. EDD

G 3131 SPHE - SAE 1006(M) -

JVCR07 1.6-2.0 2.0-3.2 3.2-8.0

900-1250 900-1500 900-2050

IS:11513 Gr. DD

G 3131 SPHE - SAE 1006(M) -

JVCR08 1.6-2.0 2.0-3.2 3.2-8.0

900-1250900-1500900-2050

IS:11513Gr. EDD

(Spl./Critical)

G 3131 SPHE - - -

HR Coils for Cold Rolling and Galvanising


Hot

Rol

led

Coils

22

chemical composition (Values are in %) hardnessC Mn S

max.P

max.Si

max.Al N

max.Others CEV RB

max. (ref)0.080 max. 0.45 max. 0.030 0.035 0.050 0.020-0.070 0.0100 - - 68

0.090-0.130 0.30-0.60 0.025 0.030 0.040 0.020-0.065 0.0075 - - 72

0.015-0.070 0.10-0.40 0.030 0.030 0.040 0.020-0.070 0.0075 - - 65

0.060-0.100 0.30-0.55 0.020 0.020 0.035 0.030-0.060 0.0060 - - 72

0.030-0.070 0.20-0.40 0.020 0.020 0.030 0.020-0.065 0.0065 - - 65

0.040-0.090 0.30-0.60 0.025 0.025 0.040 0.025-0.065 0.0060 - - 70

0.015-0.060 0.10-0.40 0.025 0.025 0.030 0.020-0.065 0.0065 - - 63

0.150-0.060 0.15-0.35 0.025 0.025 0.030 0.020-0.065 0.0065 - - 65

0.020-0.045 0.10-0.30 0.020 0.020 0.030 0.020-0.070 0.0065 - - 63

0.015-0.050 0.10-0.30 0.015 0.025 0.025 0.020-0.065 0.0060 B: 10-35 ppm - 60

0.025-0.065 0.15-0.35 0.020 0.025 0.030 0.020-0.065 0.0065 - - 63

0.050 max. 0.25 max. 0.020 0.020 0.030 0.020-0.065 0.0065 - - 63

0.020-0.060 0.15-0.35 0.020 0.025 0.030 0.020-0.065 0.0065 - - 63

0.015-0.060 0.10-0.30 0.020 0.025 0.025 0.020-0.065 0.0060 B: 20-50 ppm - 62

0.040 max. 0.10-0.25 0.015 0.020 0.020 0.030-0.070 0.0055 Ti: 0.020 max. - 60

0.040 max. 0.30 max. 0.020 0.020 0.025 0.020-0.055 0.0060 - - 60

0.035 max. 0.25 max. 0.015 0.015 0.020 0.030-0.070 0.0060 - - 60

0.150-0.045 - 0.020 0.020 0.025 0.030-0.070 0.0060 - - -

0.015 max. 0.25 max. 0.015 0.020 0.020 0.070 max. 0.0070 Ti: 0.060 max. - -

Hot R

olled Coils

JSW Grade Dimensional Scope equivalent international/biS Grades chemical composition (Values are in %) Mechanical PropertiesThickness

(mm)Width(mm)

BIS JIS EN SAE /ASTM Others C Mn S max.

P max.

Si max.

Al Nmax.

Nb V Ti Others YS Mpa

UTS Mpa

El Bend gap Hardness max.

JVDR02 1.6-2.02.0-3.2

3.2-12.0

900-1250900-1400900-1600

IS 1079 'O' - EN 10111 DD11 - - 0.050-0.110

0.250-0.600

0.030 0.030 0.150 0.015-0.070

0.0080 - - - - 220 min. 275 min. 28 min. 2t -

JVDR04 1.6-2.02.0-3.2

3.2-12.0

900-1250900-1400900-1600

IS 1079 'D' G3131 SPHD EN 10111 DD11 SAE 1008(M) - 0.050-0.090

0.200-0.500

0.025 0.025 0.050 0.020-0.070

0.0075 - - - - 215 min. 270 min. 28 min. Close -

JVDRB4 1.6-2.02.0-4.0

4.0-12.0

900-1250900-1400900-1600

IS 1079 'D' - - SAE 1008(M) B treated 0.050-0.090

0.200-0.500

0.025 0.025 0.050 0.020-0.060

0.0070 - - - B: 15-50 ppm

215 min. 270 min. 28 min. Close -

JVDRG4 1.6-2.0 2.0-3.2

3.2-12.0

900-1250 900-1400 900-1600

IS 1079 'D' G3131 SPHD EN 10111 DD11 - Customized 0.040-0.080

0.200-0.500

0.020 0.025 0.150 0.02-0.06

0.0080 - - - - 215 min 270 min 28 min Close -

JVDRP4 1.6-2.0 2.0-3.2

3.2-12.0

900-1250 900-1400 900-1600


0.150-0.400

0.025 0.025 0.040 0.020-0.065

0.0075 - - - - 210 min 270 min 28 min Close -

JVDRT4 2.0-4.0 4.0-8.0

900-1250 900-2050

IS 5986 Fe330 - - - - 0.030-0.070

0.200-0.500

0.020 0.020 0.100 0.020-0.060

0.0090 - - - - 210 min 330-440 28 min Close -

JVDR22 1.6-4.04.0-12.0

900-1250900-1600

IS 1079 D + Cu - - - - 0.040-0.090

0.150-0.500

0.030 0.030 0.080 0.020-0.070

0.0090 - - - Cu: 0.20-0.35

210 min. 270 min. 28 min. t -

JVDR05 1.6-2.02.0-3.2

3.2-12.0

900-1250900-1400900-1600

IS 1079 'DD' G3131 SPHD EN 10111 DD13 SAE 1006(M) BS 1449 HR 3 0.030-0.070

0.150-0.400

0.015 0.020 0.030 0.020-0.065

0.0065 - - - - 210 min. 260-390 29 min. Close -

JVDRB5 1.6-2.0 2.0-3.2

3.2-12.0

900-1250 900-1400 900-1600

IS 1079 'DD' G3131 SPHD EN 10111 DD12 SAE 1006(M) B treated 0.030-0.070

0.150-0.350

0.015 0.020 0.030 0.020-0.065

0.0065 - - - - 210 min 260-390 29 min Close -

JVDR06 1.6-2.02.0-3.23.2-8.0

900-1250900-1400900-1600

IS 1079 EDD G3131 SPHD /SPHE

EN 10111 DD14 SAE 1006 AK, A 622 DQ AK

BS 1449 HR 1 0.020-0.050

0.150-0.300

0.020 0.020 0.030 0.020-0.065

0.0065 - - - - 190 min. 260-380 32 min. Close -

JVDRV6 1.6-2.02.0-3.23.2-8.0

900-1250900-1400900-1600

IS 1079 EDD G3131 SPHE EN 10111 DD14 SAE 1006 AK, A 622 DQ AK

BS 1449 HR 1 0.020-0.045

0.150-0.300

0.020 0.020 0.030 0.025-0.065

0.0060 - - 0.020 max.

- 190 min. 250-360 36 min. Close -

JVDR07JVDRP7

2.0-4.04.0-12.0

900-1250900-2050

IS 5986 Fe360 G3113 SAPH 370

EN 10025 S 235 - - 0.060-0.100

0.600-1.000

0.015 0.025 0.150 0.020-0.065

0.0070 - 0.015 max.

0.030 max.

- 235 min. 370 min. 33 min. t 121-140 BHN

JVDR08JVDRP8

5.0-15.015.0 -25.0

900-20501250-2050

IS 2062 E250A (Mod)

G3113 SAPH 400

EN 10025 S 275 - BS 4360 Gr 43A

0.050-0.100

0.700-1.200

0.015 0.025 0.150 0.020-0.065

0.0080 - 0.040 max.

- - 255 min. 410 min. 28 min. t 121-149 BHN

JVDRS8 1.60-2.3 2.3-4.5

900-1250900-1600

- G3113 SAPH 440

- - - 0.050-0.100

0.700-1.100

0.015 0.025 0.200 0.020-0.060

0.0080 0.030 max.

0.050 max.

0.025 max.

- 310 min. 440 min. 28 min. t -

JVDRV8 4.0-8.0 900-2050 - G3113SAPH 440

- - - 0.050-0.100

0.700-1.100

0.015 0.020 0.150 0.020-0.065

0.0080 0.030 max.

0.050 max.

0.025 max.

- 310 min. 440 min. 28 min. t -

JVDR09 JVDRP9

3.0-20.0 900-2020 IS 5986 Fe 360 - EN 10025 S 235 A570-33 BS 1449 HR 37/23 0.080-0.13

0.60-0.85

0.020 0.025 0.030 0.020-0.065

0.0075 - - - - 235min 360-470 25 min t -

JVDRC9 1.6-2.02.0-3.2

900-1250900-1600

IS 5986 Fe 360 - EN 10025 S 235 A 135 Gr. A, A283 Gr. C

BS 1449 HR 37 / 23

0.050-0.100

0.400-0.600

0.020 0.020 0.030 0.020-0.065

0.0075 - - - - 235 min. 360-470 25 min. t -

JVDRB9 3.0-4.04.0-6.0

900-1600900-2050

IS 5986 Fe 360 - EN 10025 S 235 SAE 1012, A570-33, A283 Gr.C

BS 1449 HR 37/23

0.070-0.120

0.400-0.600

0.020 0.020 0.030 0.020-0.065

0.0075 - - - - 235 min. 360-470 28 min. t -

JVDRM9 6.0-20.0 900-2050 IS 5986 Fe 360 - EN 10025 S 235 - BS 1449 HR 37 / 23

0.110-0.150

0.400-0.700

0.020 0.025 0.035 0.025-0.065

0.0075 - - - - 235 min. 360-470 28 min. t -

JVDRS1 1.6-2.52.5-4.0

900-1250900-1600

IS 5986 Fe410 - EN 10025 S 275 - - 0.080-0.140

0.700-1.100

0.020 0.025 0.035 0.020-0.060

0.0080 - - - - 275 min. 430 min. 24 min. 2t -

JVDR10 3.0-5.05.0-6.0

900-1600900-2050

IS 5986 Fe410 G3101 SS 400 EN 10025 S 275 - - 0.120-0.160

0.750-1.200

0.020 0.025 0.050 0.020-0.065

0.0080 - - - - 275 min. 430-550 24 min. 2t -

JVDRB1JVDRM1

6.0-12.012.0-20.0

900-2050900-2050

IS 2062 E250A G3101 SS 400 EN 10025 S 275 - - 0.150-0.200

0.800-1.300

0.020 0.020 0.050 0.020-0.065

0.0080 - - - - 275 min. 430 min. 24 min. 2t -

23

HR Coils for Drawing and Press Forming


Hot

Rol

led

Coils

24


(mm)Width(mm)


P max.

Si max.

Al Nmax.


UTS Mpa


JVDR02 1.6-2.02.0-3.2

3.2-12.0

900-1250900-1400900-1600

IS 1079 'O' - EN 10111 DD11 - - 0.050-0.110

0.250-0.600

0.030 0.030 0.150 0.015-0.070

0.0080 - - - - 220 min. 275 min. 28 min. 2t -

JVDR04 1.6-2.02.0-3.2

3.2-12.0

900-1250900-1400900-1600


0.200-0.500

0.025 0.025 0.050 0.020-0.070

0.0075 - - - - 215 min. 270 min. 28 min. Close -

JVDRB4 1.6-2.02.0-4.0

4.0-12.0

900-1250900-1400900-1600

IS 1079 'D' - - SAE 1008(M) B treated 0.050-0.090

0.200-0.500

0.025 0.025 0.050 0.020-0.060

0.0070 - - - B: 15-50 ppm

215 min. 270 min. 28 min. Close -

JVDRG4 1.6-2.0 2.0-3.2

3.2-12.0

900-1250 900-1400 900-1600

IS 1079 'D' G3131 SPHD EN 10111 DD11 - Customized 0.040-0.080

0.200-0.500

0.020 0.025 0.150 0.02-0.06

0.0080 - - - - 215 min 270 min 28 min Close -

JVDRP4 1.6-2.0 2.0-3.2

3.2-12.0

900-1250 900-1400 900-1600


0.150-0.400

0.025 0.025 0.040 0.020-0.065

0.0075 - - - - 210 min 270 min 28 min Close -

JVDRT4 2.0-4.0 4.0-8.0

900-1250 900-2050

IS 5986 Fe330 - - - - 0.030-0.070

0.200-0.500

0.020 0.020 0.100 0.020-0.060

0.0090 - - - - 210 min 330-440 28 min Close -

JVDR22 1.6-4.04.0-12.0

900-1250900-1600

IS 1079 D + Cu - - - - 0.040-0.090

0.150-0.500

0.030 0.030 0.080 0.020-0.070

0.0090 - - - Cu: 0.20-0.35

210 min. 270 min. 28 min. t -

JVDR05 1.6-2.02.0-3.2

3.2-12.0

900-1250900-1400900-1600

IS 1079 'DD' G3131 SPHD EN 10111 DD13 SAE 1006(M) BS 1449 HR 3 0.030-0.070

0.150-0.400

0.015 0.020 0.030 0.020-0.065

0.0065 - - - - 210 min. 260-390 29 min. Close -

JVDRB5 1.6-2.0 2.0-3.2

3.2-12.0

900-1250 900-1400 900-1600

IS 1079 'DD' G3131 SPHD EN 10111 DD12 SAE 1006(M) B treated 0.030-0.070

0.150-0.350

0.015 0.020 0.030 0.020-0.065

0.0065 - - - - 210 min 260-390 29 min Close -

JVDR06 1.6-2.02.0-3.23.2-8.0

900-1250900-1400900-1600

IS 1079 EDD G3131 SPHD /SPHE

EN 10111 DD14 SAE 1006 AK, A 622 DQ AK

BS 1449 HR 1 0.020-0.050

0.150-0.300

0.020 0.020 0.030 0.020-0.065

0.0065 - - - - 190 min. 260-380 32 min. Close -

JVDRV6 1.6-2.02.0-3.23.2-8.0

900-1250900-1400900-1600

IS 1079 EDD G3131 SPHE EN 10111 DD14 SAE 1006 AK, A 622 DQ AK

BS 1449 HR 1 0.020-0.045

0.150-0.300

0.020 0.020 0.030 0.025-0.065

0.0060 - - 0.020 max.

- 190 min. 250-360 36 min. Close -

JVDR07JVDRP7

2.0-4.04.0-12.0

900-1250900-2050

IS 5986 Fe360 G3113 SAPH 370

EN 10025 S 235 - - 0.060-0.100

0.600-1.000

0.015 0.025 0.150 0.020-0.065

0.0070 - 0.015 max.

0.030 max.

- 235 min. 370 min. 33 min. t 121-140 BHN

JVDR08JVDRP8

5.0-15.015.0 -25.0

900-20501250-2050

IS 2062 E250A (Mod)

G3113 SAPH 400

EN 10025 S 275 - BS 4360 Gr 43A

0.050-0.100

0.700-1.200

0.015 0.025 0.150 0.020-0.065

0.0080 - 0.040 max.

- - 255 min. 410 min. 28 min. t 121-149 BHN

JVDRS8 1.60-2.3 2.3-4.5

900-1250900-1600

- G3113 SAPH 440

- - - 0.050-0.100

0.700-1.100

0.015 0.025 0.200 0.020-0.060

0.0080 0.030 max.

0.050 max.

0.025 max.

- 310 min. 440 min. 28 min. t -

JVDRV8 4.0-8.0 900-2050 - G3113SAPH 440

- - - 0.050-0.100

0.700-1.100

0.015 0.020 0.150 0.020-0.065

0.0080 0.030 max.

0.050 max.

0.025 max.

- 310 min. 440 min. 28 min. t -

JVDR09 JVDRP9

3.0-20.0 900-2020 IS 5986 Fe 360 - EN 10025 S 235 A570-33 BS 1449 HR 37/23 0.080-0.13

0.60-0.85

0.020 0.025 0.030 0.020-0.065

0.0075 - - - - 235min 360-470 25 min t -

JVDRC9 1.6-2.02.0-3.2

900-1250900-1600

IS 5986 Fe 360 - EN 10025 S 235 A 135 Gr. A, A283 Gr. C

BS 1449 HR 37 / 23

0.050-0.100

0.400-0.600

0.020 0.020 0.030 0.020-0.065

0.0075 - - - - 235 min. 360-470 25 min. t -

JVDRB9 3.0-4.04.0-6.0

900-1600900-2050

IS 5986 Fe 360 - EN 10025 S 235 SAE 1012, A570-33, A283 Gr.C

BS 1449 HR 37/23

0.070-0.120

0.400-0.600

0.020 0.020 0.030 0.020-0.065

0.0075 - - - - 235 min. 360-470 28 min. t -

JVDRM9 6.0-20.0 900-2050 IS 5986 Fe 360 - EN 10025 S 235 - BS 1449 HR 37 / 23

0.110-0.150

0.400-0.700

0.020 0.025 0.035 0.025-0.065

0.0075 - - - - 235 min. 360-470 28 min. t -

JVDRS1 1.6-2.52.5-4.0

900-1250900-1600

IS 5986 Fe410 - EN 10025 S 275 - - 0.080-0.140

0.700-1.100

0.020 0.025 0.035 0.020-0.060

0.0080 - - - - 275 min. 430 min. 24 min. 2t -

JVDR10 3.0-5.05.0-6.0

900-1600900-2050

IS 5986 Fe410 G3101 SS 400 EN 10025 S 275 - - 0.120-0.160

0.750-1.200

0.020 0.025 0.050 0.020-0.065

0.0080 - - - - 275 min. 430-550 24 min. 2t -

JVDRB1JVDRM1

6.0-12.012.0-20.0

900-2050900-2050

IS 2062 E250A G3101 SS 400 EN 10025 S 275 - - 0.150-0.200

0.800-1.300

0.020 0.020 0.050 0.020-0.065

0.0080 - - - - 275 min. 430 min. 24 min. 2t -

Hot R

olled Coils


(mm)Width(mm)


P max.

Si max.

Al Nmax.


UTS Mpa


JVDR11 2.5-5.05.0-8.0

900-1250900-2050

IS 2062 E350 G3101 SS 490 - A570-50 - 0.090-0.150

0.800-1.300

0.015 0.020 0.100 0.020-0.060

0.0075 0.040 max.

0.045 max.

0.025 max.

- 355 min. 490-610 22 min. 2t -

JVDR12 2.0-4.04.0-5.0

900-1250900-1600

IS 2062 E250 (M) G3101 SS 400 - - Cust. B treated

0.020-0.070

0.400-0.800

0.015 0.020 0.100 0.020-0.060

0.0080 0.040 max.

- 0.025 max.

B: 10-35 ppm

275 min. 410 min. 25 min. 2t -

JVDRS3 JVDR13

3.0-5.05.0-8.0

900-1500900-2050

- G3113SAPH 400

- - - 0.050-0.100

0.300-0.700

0.015 0.025 0.100 0.020-0.060

0.0080 0.030 max.

0.040 max.

0.020 max.

- 275 min. 400 min. 28 min. 2t -

JVDR16 1.8-2.32.3-4.04.0-8.0

900-1250900-1600900-2050

IS 1079 EDD G3131SPHE

EN 10111 DD14 SAE1005 - 0.020-0.050

0.100-0.250

0.015 0.020 0.030 0.020-0.060

0.0065 - - - - 170 min. 360 max. 35 min. Close 60 HRB

JVDR17 3.0-6.0 6.0-12.0

900-1600 900-2050

IS 2062 Fe 490 G3134 SPFH 490 - - Customized 0.060-0.090

1.10-1.40

0.015 0.020 0.050 0.020-0.060

0.0070 0.040 max.

0.050 max

0.030 max

- 355 min. 490 min. 25 min 2t -

JVDR18 3.0-6.06.0-12.0

900-1400900-2050

IS 2062 E410 G3134 SPFH 540 - - Customized 0.150-0.210

1.200-1.600

0.015 0.020 0.250 0.020-0.065

0.0075 0.040 max.

0.050 max.

0.030 max.

- 410 min. 540-640 18 min. 2t -

JVDR26 1.6-4.0 4.0-12.0

900-1250 900-1600

IS1079 EDD + Cu G3131SPHD/ SPHE

- - - 0.020-0.050

0.15-0.35

0.020 0.025 0.050 0.020-0.065

0.0070 - - - Cu: 0.20-0.35

210 min. 270 min. 28 min. t -

JSW Grade Dimensional Scope equivalent international/biS Grades chemical composition (Values are in %)Thickness

(mm)Width(mm)

BIS EN SAE /ASTM Others C Mn S max.

P max.

Si Al N max.

JVSL01 1.6-1.82.0-4.04.0-8.0

900-1250 900-1400 900-2050

- - - Si K, High Al 0.010-0.035 0.25-0.50 0.020 0.050-0.150 0.10-0.25 0.075-0.130 0.0075

JVSLH1 1.6-1.82.0-4.04.0-8.0

900-1250 900-1400 900-2050

- - - Si K, High P, Low Al 0.010-0.050 0.20-0.45 0.020 0.050-0.150 0.20-0.35 0.006 max. 0.0075

JVSL02 1.6-1.82.0-4.04.0-8.0

900-1250 900-1400 900-2050

IS 1079 Gr 'D' SiK

- - IS 1079 Gr 'D' Si K, Low Al 0.015-0.055 0.15-0.40 0.025 0.025 0.20-0.35 0.006 max. 0.0075

JVSLP2 1.6-2.32.3-5.05.0-8.0

900-1250 900-1400 900-2050

IS 1079 Gr 'D' SiK (M)

- - Si K, Low Al (Stamp) Cust. 0.070-0.120 0.40-0.60 0.020 0.025 0.10-0.30 0.006 max. 0.0075

JVSL03 1.6-1.82.0-4.0 4.0-8.0

900-1250 900-1400 900-2050

IS 1079 Gr 'D' SiK

- - Si K, Low Al (rim/stamp) Cust.

0.040-0.070 0.25-0.50 0.025 0.025 0.05-0.20 0.006 max. 0.0075

JVSLR3 1.6-1.82.0-4.04.0-8.0

900-1250 900-1400 900-2050

IS 1079 Gr 'D' SiK

- - Si K, Low Al 0.025-0.070 0.30-0.50 0.020 0.015-0.030 0.05-0.15 0.010 max. 0.0075

JVSL04 1.6-2.22.2-4.04.0-8.0

900-1250 900-1400 900-2050

IS 1079 Gr 'D' SiK

- - D' Si K, Low Al 0.015-0.045 0.25-0.50 0.025 0.025 0.05-0.15 0.006 max. 0.0075

JVSL05 1.6-1.82.0-4.04.0-8.0

900-1250 900-1400 900-2050


- - D' Si K, Low Al 0.015-0.050 0.30-0.60 0.020 0.015-0.050 0.20-0.35 0.006 max. 0.0075

JVSL07 1.6-1.82.0-4.04.0-8.0

900-1250 900-1400 900-2050


- - D' Si K, Low Al 0.050-0.010 0.30-0.60 0.020 0.025 0.01-0.10 0.006 max. 0.0075

HR Coils for Drawing and Press Forming

HR Strips for Electrical Stampings and Forming25


Hot

Rol

led

Coils


(mm)Width(mm)


P max.

Si max.

Al Nmax.


UTS Mpa


JVDR11 2.5-5.05.0-8.0

900-1250900-2050

IS 2062 E350 G3101 SS 490 - A570-50 - 0.090-0.150

0.800-1.300

0.015 0.020 0.100 0.020-0.060

0.0075 0.040 max.

0.045 max.

0.025 max.

- 355 min. 490-610 22 min. 2t -

JVDR12 2.0-4.04.0-5.0

900-1250900-1600

IS 2062 E250 (M) G3101 SS 400 - - Cust. B treated

0.020-0.070

0.400-0.800

0.015 0.020 0.100 0.020-0.060

0.0080 0.040 max.

- 0.025 max.

B: 10-35 ppm

275 min. 410 min. 25 min. 2t -

JVDRS3 JVDR13

3.0-5.05.0-8.0

900-1500900-2050

- G3113SAPH 400

- - - 0.050-0.100

0.300-0.700

0.015 0.025 0.100 0.020-0.060

0.0080 0.030 max.

0.040 max.

0.020 max.

- 275 min. 400 min. 28 min. 2t -

JVDR16 1.8-2.32.3-4.04.0-8.0

900-1250900-1600900-2050

IS 1079 EDD G3131SPHE

EN 10111 DD14 SAE1005 - 0.020-0.050

0.100-0.250

0.015 0.020 0.030 0.020-0.060

0.0065 - - - - 170 min. 360 max. 35 min. Close 60 HRB

JVDR17 3.0-6.0 6.0-12.0

900-1600 900-2050

IS 2062 Fe 490 G3134 SPFH 490 - - Customized 0.060-0.090

1.10-1.40

0.015 0.020 0.050 0.020-0.060

0.0070 0.040 max.

0.050 max

0.030 max

- 355 min. 490 min. 25 min 2t -

JVDR18 3.0-6.06.0-12.0

900-1400900-2050

IS 2062 E410 G3134 SPFH 540 - - Customized 0.150-0.210

1.200-1.600

0.015 0.020 0.250 0.020-0.065

0.0075 0.040 max.

0.050 max.

0.030 max.

- 410 min. 540-640 18 min. 2t -

JVDR26 1.6-4.0 4.0-12.0

900-1250 900-1600

IS1079 EDD + Cu G3131SPHD/ SPHE

- - - 0.020-0.050

0.15-0.35

0.020 0.025 0.050 0.020-0.065

0.0070 - - - Cu: 0.20-0.35

210 min. 270 min. 28 min. t -

JSW Grade Dimensional Scope equivalent international/biS Grades chemical composition (Values are in %)Thickness

(mm)Width(mm)


P max.

Si Al N max.

JVSL01 1.6-1.82.0-4.04.0-8.0

900-1250 900-1400 900-2050

- - - Si K, High Al 0.010-0.035 0.25-0.50 0.020 0.050-0.150 0.10-0.25 0.075-0.130 0.0075

JVSLH1 1.6-1.82.0-4.04.0-8.0

900-1250 900-1400 900-2050

- - - Si K, High P, Low Al 0.010-0.050 0.20-0.45 0.020 0.050-0.150 0.20-0.35 0.006 max. 0.0075

JVSL02 1.6-1.82.0-4.04.0-8.0

900-1250 900-1400 900-2050

IS 1079 Gr 'D' SiK

- - IS 1079 Gr 'D' Si K, Low Al 0.015-0.055 0.15-0.40 0.025 0.025 0.20-0.35 0.006 max. 0.0075

JVSLP2 1.6-2.32.3-5.05.0-8.0

900-1250 900-1400 900-2050


- - Si K, Low Al (Stamp) Cust. 0.070-0.120 0.40-0.60 0.020 0.025 0.10-0.30 0.006 max. 0.0075

JVSL03 1.6-1.82.0-4.0 4.0-8.0

900-1250 900-1400 900-2050

IS 1079 Gr 'D' SiK

- - Si K, Low Al (rim/stamp) Cust.

0.040-0.070 0.25-0.50 0.025 0.025 0.05-0.20 0.006 max. 0.0075

JVSLR3 1.6-1.82.0-4.04.0-8.0

900-1250 900-1400 900-2050

IS 1079 Gr 'D' SiK

- - Si K, Low Al 0.025-0.070 0.30-0.50 0.020 0.015-0.030 0.05-0.15 0.010 max. 0.0075

JVSL04 1.6-2.22.2-4.04.0-8.0

900-1250 900-1400 900-2050

IS 1079 Gr 'D' SiK

- - D' Si K, Low Al 0.015-0.045 0.25-0.50 0.025 0.025 0.05-0.15 0.006 max. 0.0075

JVSL05 1.6-1.82.0-4.04.0-8.0

900-1250 900-1400 900-2050


- - D' Si K, Low Al 0.015-0.050 0.30-0.60 0.020 0.015-0.050 0.20-0.35 0.006 max. 0.0075

JVSL07 1.6-1.82.0-4.04.0-8.0

900-1250 900-1400 900-2050


- - D' Si K, Low Al 0.050-0.010 0.30-0.60 0.020 0.025 0.01-0.10 0.006 max. 0.0075

26

Hot R

olled Coils

JSW Grades Dimensional Scope equivalent international/biS Grades chemical composition (Values are in %) Mechanical PropertiesThickness

(mm)Width(mm)

BIS JIS EN SAE/ASTM Others C Mn Smax.

Pmax.

Si Al Nmax.

CE YS Mpa

UTS Mpa

El Bend gap

JVWT01 1.6-2.02.0-3.2

3.2-12.0

900-1250900-1500900-2050

IS 10748 Gr. 1 G-3132SPHT1

- SAE 1008 - 0.04-0.10 0.20-0.50 0.030 0.030 0.15 max. 0.020-0.070 0.0100 0.18 max.

170 min.

290min.

30 min.

t

JVWT02 1.6-2.52.5-4.0

4.0-12.0

900-1250900-1500900-2050

IS 10748 Gr. 2 G-3132SPHT2

- SAE 1010 - 0.07-0.12 0.30-0.60 0.030 0.030 0.15 max. 0.020-0.065 0.0100 0.20 max.

210 min.

330min.

28 min.

2t

JVWT03 3.0-5..05.0-12.0

900-1500900-2050

IS 10748 Gr. 3 G-3132 SPHT3(M)

- A 135-Gr B - 0.10-0.16 0.80-1.20 0.030 0.030 0.25 max. 0.020-0.070 0.0090 0.38 max.

240 min.

410min.

25 min.

2t

JVWT04 3.0-5.05.0-12.0

900-1250900-2050

IS 10748 Gr. 4 G-3132 SPHT3(M)

- A 135-Gr B - 0.12-0.20 0.80-1.30 0.030 0.030 0.25 max. 0.020-0.070 0.0090 0.40 max.

275 min.

430min.

20 min.

3t

JVWT05 3.0-5.05.0-12.0

900-1400900-2050

IS 10748 Gr. 4 G-3132SPHT4

- A53-Gr B - 0.14-0.20 0.70-1.00 0.025 0.025 0.25 max. 0.020-0.065 0.0090 0.40 max.

275 min.

430min.

20 min.

3t

JVWT06 3.2-5.05.0-12.0

900-1400900-2050

IS 10748 Gr. 5 - - ASTM A500-Gr C

- 0.16-0.23 0.80-1.30 0.025 0.030 0.25 max. 0.020-0.065 0.0090 0.43 max.

310 min.

490min.

16 min.

3t

JSW Grade Dimensional Scope Grades chemical composition (Values are in %) Mechanical PropertiesThickness (mm) Width (mm) API Equivalent C Mn S

max.P

max.Si Al N

max.Nb

max.V

max.Ti

max.Ni

max.Others CEV YS

MpaUTS Mpa

El Bend gap

Charpy Impact

Hard-ness

YS/ UTS max.

JVLN01 4.0-8.0 8.0-25.0

1000-1600 1000-2050

API 5L Gr. B 0.16 max.

0.70-1.30

0.015 0.020 0.10-0.30

0.01-0.06

0.0075 0.030 0.030 0.025 - - 0.36 max.

245 min.

415-520

28 min.

2t 80J at 0°C

HV 248 0.88

JVLN02 4.0-8.0 8.0-25.0

1000-16001000-2050

API 5LX-42 0.07-0.16

0.70-1.25

0.015 0.020 0.15-0.30

0.02-0.06

0.0080 0.030 0.035 0.035 - - 0.38 max.

300 min.

420-530

30 min.

2t 80J at 0°C

HV 248 0.88

JVLN03 4.0-8.0 8.0-25.0

1000-16001000-2050

API 5LX-46 0.07-0.15

0.70-1.30

0.015 0.020 0.15-0.30

0.02-0.05

0.0075 0.040 0.040 0.035 - - 0.38 max.

320 min.

435-550

27 min.

2t 80J at 0°C

HV 248 0.88

JVLN04 4.0-8.0 8.0-25.0

1000-16001000-2050

API 5LX-52 0.07-0.15

0.80-1.30

0.015 0.020 0.15-0.30

0.02-0.06

0.0075 0.050 0.060 0.035 - - 0.38 max.

370-531

455-590

27 min.

2t 80J at 0°C

HV 248 0.90

JVLN05 6.0-10.010.0-25.0

1000-16001000-2050

API 5LX-56 0.07-0.15

0.80-1.35

0.015 0.020 0.15-0.30

0.02-0.06

0.0075 0.050 0.060 0.040 - - 0.38 max.

390-544

490-630

27 min.

2t 80J at 0°C

HV 248 0.90

JVLN06 6.0-10.0 10.0-25.0

1000-16001000-2050

API 5LX-60 0.12 max.

0.80-1.50

0.015 0.020 0.15-0.30

0.02-0.06

0.0075 0.050 0.060 0.040 - Cr: 0.25 max.

0.40 max.

415-565

520-670

27 min.

2t 80J at 0°C

HV 248 0.90

JVLN07 8.0-16.0 16.0-22.0

1000-20501000-1900


0.80-1.60

0.015 0.020 0.15-0.30

0.01-0.06

0.0075 0.050 0.065 0.040 0.300 Cr: 0.25 max.

0.40 max.

450-600

535-720

27 min.

2t 80J at 0°C

HV 248 0.90

JVLN08 8.0-16.0 16.0-20.0

1000-20501000-1900

API 5L-X-70 0.12 max.

1.00-1.70

0.015 0.020 0.15-0.45

0.01-0.05

0.0075 0.090 0.070 0.025 0.250 Cr: 0.30 max.

0.40 max.

485-620

570-750

27 min.

2t 80J at 0°C

HV 248 0.90

27

HR Coils for Welded Tubes and Pipes

Note: The internal grade will be finalized after mutually agreed TDC between customers and JSW

HR Strips for Line Pipes


Hot

Rol

led

Coils

28


(mm)Width(mm)

BIS JIS EN SAE/ASTM Others C Mn Smax.

Pmax.

Si Al Nmax.

CE YS Mpa

UTS Mpa

El Bend gap

JVWT01 1.6-2.02.0-3.2

3.2-12.0

900-1250900-1500900-2050

IS 10748 Gr. 1 G-3132SPHT1

- SAE 1008 - 0.04-0.10 0.20-0.50 0.030 0.030 0.15 max. 0.020-0.070 0.0100 0.18 max.

170 min.

290min.

30 min.

t

JVWT02 1.6-2.52.5-4.0

4.0-12.0

900-1250900-1500900-2050

IS 10748 Gr. 2 G-3132SPHT2

- SAE 1010 - 0.07-0.12 0.30-0.60 0.030 0.030 0.15 max. 0.020-0.065 0.0100 0.20 max.

210 min.

330min.

28 min.

2t

JVWT03 3.0-5..05.0-12.0

900-1500900-2050

IS 10748 Gr. 3 G-3132 SPHT3(M)

- A 135-Gr B - 0.10-0.16 0.80-1.20 0.030 0.030 0.25 max. 0.020-0.070 0.0090 0.38 max.

240 min.

410min.

25 min.

2t

JVWT04 3.0-5.05.0-12.0

900-1250900-2050

IS 10748 Gr. 4 G-3132 SPHT3(M)

- A 135-Gr B - 0.12-0.20 0.80-1.30 0.030 0.030 0.25 max. 0.020-0.070 0.0090 0.40 max.

275 min.

430min.

20 min.

3t

JVWT05 3.0-5.05.0-12.0

900-1400900-2050

IS 10748 Gr. 4 G-3132SPHT4

- A53-Gr B - 0.14-0.20 0.70-1.00 0.025 0.025 0.25 max. 0.020-0.065 0.0090 0.40 max.

275 min.

430min.

20 min.

3t

JVWT06 3.2-5.05.0-12.0

900-1400900-2050

IS 10748 Gr. 5 - - ASTM A500-Gr C

- 0.16-0.23 0.80-1.30 0.025 0.030 0.25 max. 0.020-0.065 0.0090 0.43 max.

310 min.

490min.

16 min.

3t

JSW Grade Dimensional Scope Grades chemical composition (Values are in %) Mechanical PropertiesThickness (mm) Width (mm) API Equivalent C Mn S

max.P

max.Si Al N

max.Nb

max.V

max.Ti

max.Ni

max.Others CEV YS

MpaUTS Mpa

El Bend gap

Charpy Impact

Hard-ness

YS/ UTS max.

JVLN01 4.0-8.0 8.0-25.0

1000-1600 1000-2050

API 5L Gr. B 0.16 max.

0.70-1.30

0.015 0.020 0.10-0.30

0.01-0.06

0.0075 0.030 0.030 0.025 - - 0.36 max.

245 min.

415-520

28 min.

2t 80J at 0°C

HV 248 0.88

JVLN02 4.0-8.0 8.0-25.0

1000-16001000-2050

API 5LX-42 0.07-0.16

0.70-1.25

0.015 0.020 0.15-0.30

0.02-0.06

0.0080 0.030 0.035 0.035 - - 0.38 max.

300 min.

420-530

30 min.

2t 80J at 0°C

HV 248 0.88

JVLN03 4.0-8.0 8.0-25.0

1000-16001000-2050

API 5LX-46 0.07-0.15

0.70-1.30

0.015 0.020 0.15-0.30

0.02-0.05

0.0075 0.040 0.040 0.035 - - 0.38 max.

320 min.

435-550

27 min.

2t 80J at 0°C

HV 248 0.88

JVLN04 4.0-8.0 8.0-25.0

1000-16001000-2050

API 5LX-52 0.07-0.15

0.80-1.30

0.015 0.020 0.15-0.30

0.02-0.06

0.0075 0.050 0.060 0.035 - - 0.38 max.

370-531

455-590

27 min.

2t 80J at 0°C

HV 248 0.90

JVLN05 6.0-10.010.0-25.0

1000-16001000-2050

API 5LX-56 0.07-0.15

0.80-1.35

0.015 0.020 0.15-0.30

0.02-0.06

0.0075 0.050 0.060 0.040 - - 0.38 max.

390-544

490-630

27 min.

2t 80J at 0°C

HV 248 0.90

JVLN06 6.0-10.0 10.0-25.0

1000-16001000-2050


0.80-1.50

0.015 0.020 0.15-0.30

0.02-0.06

0.0075 0.050 0.060 0.040 - Cr: 0.25 max.

0.40 max.

415-565

520-670

27 min.

2t 80J at 0°C

HV 248 0.90

JVLN07 8.0-16.0 16.0-22.0

1000-20501000-1900


0.80-1.60

0.015 0.020 0.15-0.30

0.01-0.06

0.0075 0.050 0.065 0.040 0.300 Cr: 0.25 max.

0.40 max.

450-600

535-720

27 min.

2t 80J at 0°C

HV 248 0.90

JVLN08 8.0-16.0 16.0-20.0

1000-20501000-1900

API 5L-X-70 0.12 max.

1.00-1.70

0.015 0.020 0.15-0.45

0.01-0.05

0.0075 0.090 0.070 0.025 0.250 Cr: 0.30 max.

0.40 max.

485-620

570-750

27 min.

2t 80J at 0°C

HV 248 0.90

Hot R

olled Coils


(mm)Width(mm)

BIS JIS EN SAE/ ASTM Others C Mn S max.

P max.

Si Al Nmax.

Others CE YS Mpa

UTS Mpa

El Bend gap

Charpy Impact

JVSTC6 1.6-2.5 2.5-3.0

900-1250900-1500

IS 5986 Fe 410IS 2062 E 250A

G-3101 SS400 - ASTM - A36 - 0.08-0.14 1.0 max. 0.030 0.030 0.20 max.

0.020-0.065 0.0075 - 0.30 max.

255 min.

410-520 24 min.

t -

JVSTS6 3.0-3.53.5-5.0

900-1500900-1800

IS 5986 Fe 410, IS 2062 E 250A

G-3101 SS400 - ASTM - A36 SA 516 Gr. 60 0.09-0.15 0.60-1.10 0.025 0.025 0.20 max.

0.020-0.065 0.0080 - 0.35 max.

255 min.

410-520 24 min.

2t -

JVST01 5.0-8.0 900-2050 IS 2062 E 250A G-3101 SS400 EN 10025 S275

ASTM - A36 BS 4360 Gr. 43 B 0.12-0.20 0.75-1.20 0.030 0.030 0.30 max.

0.020-0.065 0.0090 - 0.42 max.

275 min.

430-550 23 min.

2t -

JVSTP1 6.0-12.0 900-2050 IS 2062 E 250A G-3101 SS400 EN 10025 S275

ASTM - A36 BS 4360 Gr. 43 A 0.15-0.21 0.80-1.40 0.030 0.030 0.30 max.

0.020-0.080 0.0090 - 0.42 max.

275 min.

430-550 23 min.

2t -

JVSTA1 4.0-8.0 900-2050 IS 2062Fe410WA - - - St42 Alk, (Customized)

0.14-0.20 0.70-1.20 0.020 0.025 0.050 max.

0.020-0.065 0.0080 - 0.40 max.

310min.

410-500 28min.

t -

JVST02 4.0-8.0 900-2050 IS 2062 E 250B G-3106 SM400B

EN 10025 S275 J0

- - 0.12-0.18 0.70-1.20 0.030 0.030 0.30 max.

0.020-0.065 0.0080 - 0.41 max.

275 min.

430-550 23 min.

2t 27J at 0°C

JVSTP2 6.0-16.0 900-2050 IS 2062 E 250B G-3106 SM400B

EN 10025 S275 J0

- - 0.14-0.20 0.80-1.30 0.025 0.025 0.25 max.

0.020-0.065 0.0090 - 0.41 max.

275 min.

430-550 23 min.

2t 27J at 0°C

JVST03 4.0-6.0 900-2050 IS 2062 E 250C G-3106 SM400C

EN 10025 S275J2

- - 0.12-0.18 0.75-1.20 0.025 0.025 0.20 max.

0.020-0.065 0.0080 - 0.39 max.

275 min.

430-550 23 min.

2t 27J at -20°C

JVSTP3 6.0-12.0 900-2050 IS 2062 E 250C G-3106 SM400C

EN 10025 S275J2

- - 0.14-0.20 0.80-1.30 0.025 0.025 0.20 max.

0.020-0.065 0.0090 - 0.39 max.

275 min.

430-550 23 min.

2t 27J at -20°C

JVSTT2JVSTT3

12.0-20.020.0-25.0

1000-20501250-2050

IS 2062 E 250B G-3101SS400

EN 10025 S275

ASTM - A36 BS 4360 Gr. 43 A 0.16-0.21 0.90-1.30 0.015 0.020 0.25 max.

0.020-0.065 0.0090 - 0.42 max.

275 min.

430-550 23 min.

2t -

JVSTS1 2.6-4.04.0-8.0

900-1400 900-2050

IS 2062 E 250(Fe 410 WA)

- - - St 42 Sik (Customized)

0.15-0.20 0.60-1.10 0.020 0.025 0.10-0.30 0.015 max. 0.0080 - 0.40 max.

330 min.

430-520 23 min.

t -

JVST04 2.6-4.04.0-8.0

900-1400 900-2050

IS 5986 Fe 410IS 2062 E 250 (Fe 410 WA)

G-3136 SN400A

- SAE 1018 (M) - 0.14-0.20 0.50-0.90 0.025 0.025 0.15 max.

0.020-0.070 0.0080 - 0.38 max.

310 min.

410 min. 23 min.

2t -

JVSTA4 3.0-4.04.0-8.0

900-1400 900-2050

IS 2062 Fe 410 WA G-3136 SN400A

- SAE 1018 - 0.16-0.23 0.60-1.00 0.025 0.025 0.050 max.

0.020-0.065 0.0080 - 0.38 max.

310 min.

410min.

23min.

2t -

JVSTA6 2.6-4.04.0-8.0

900-1400 900-2050

IS 2062 Fe 410WA - - - St42 Alk (Customized)

0.09-0.15 0.60-1.00 0.020 0.025 0.060 max.

0.020-0.060 0.0080 - 0.40 max.

310min.

410-500 28min.

t -

JVST07 2.0-4.04.0-8.0

900-1400 900-2050

IS 2062 E 250(Fe 410 WA)

- - SAE 1020 - 0.17-0.23 0.40-0.70 0.015 0.020 0.15 max.

0.020-0.060 0.0080 - 0.35 max.

300 min.

410min.

25 min.

t -

JVST15 3.0-4.04.0-8.0

900-1400 900-2050

- - EN 10025 S235

SAE 1015 C15, Sik 0.12-0.17 0.30-0.60 0.020 0.025 0.15-0.35 0.010 max. 0.0075 - 0.30 max.

255 min.

410min.

25 min.

t -

JVST21 5.0-12.0 900-2050 IS 2062 E 250 Cu(Fe 410 Cu-WA)

- - ASTM - A36 +Cu

BS 4360 Gr. 43 A +Cu

0.12-0.20 0.75-1.20 0.025 0.025 0.20 max.

0.020-0.065 0.0080 Cu: 0.20-0.35

- 250 min.

430-550 23 min.

2t 27 J at 0°C

JVST25 5.0-12.0 900-2050 IS 2062 E 250C Cu(Fe 410 Cu-WC)

- - - - 0.08-0.13 0.90-1.30 0.020 0.025 0.25 max.

0.020-0.065 0.0080 Cu:0.20-0.35Nb: 0.020

max.

- 250 min.

430-550 23 min.

2t -

JVST26 1.6-3.0 900-1250 IS 2062 Fe 410 Cu-WC

- - - - 0.08-0.14 1.0 max. 0.030 0.03 0.20 max.

0.020-0.065 0.0075 Cu: 0.20-0.30

- 255 min.

410-520 24 min.

t -

29

HR Coils for Structural and General Engineering


Hot

Rol

led

Coils

30


(mm)Width(mm)

BIS JIS EN SAE/ ASTM Others C Mn S max.

P max.

Si Al Nmax.

Others CE YS Mpa

UTS Mpa

El Bend gap

Charpy Impact

JVSTC6 1.6-2.5 2.5-3.0

900-1250900-1500

IS 5986 Fe 410IS 2062 E 250A

G-3101 SS400 - ASTM - A36 - 0.08-0.14 1.0 max. 0.030 0.030 0.20 max.

0.020-0.065 0.0075 - 0.30 max.

255 min.

410-520 24 min.

t -

JVSTS6 3.0-3.53.5-5.0

900-1500900-1800

IS 5986 Fe 410, IS 2062 E 250A

G-3101 SS400 - ASTM - A36 SA 516 Gr. 60 0.09-0.15 0.60-1.10 0.025 0.025 0.20 max.

0.020-0.065 0.0080 - 0.35 max.

255 min.

410-520 24 min.

2t -

JVST01 5.0-8.0 900-2050 IS 2062 E 250A G-3101 SS400 EN 10025 S275

ASTM - A36 BS 4360 Gr. 43 B 0.12-0.20 0.75-1.20 0.030 0.030 0.30 max.

0.020-0.065 0.0090 - 0.42 max.

275 min.

430-550 23 min.

2t -

JVSTP1 6.0-12.0 900-2050 IS 2062 E 250A G-3101 SS400 EN 10025 S275

ASTM - A36 BS 4360 Gr. 43 A 0.15-0.21 0.80-1.40 0.030 0.030 0.30 max.

0.020-0.080 0.0090 - 0.42 max.

275 min.

430-550 23 min.

2t -

JVSTA1 4.0-8.0 900-2050 IS 2062Fe410WA - - - St42 Alk, (Customized)

0.14-0.20 0.70-1.20 0.020 0.025 0.050 max.

0.020-0.065 0.0080 - 0.40 max.

310min.

410-500 28min.

t -

JVST02 4.0-8.0 900-2050 IS 2062 E 250B G-3106 SM400B

EN 10025 S275 J0

- - 0.12-0.18 0.70-1.20 0.030 0.030 0.30 max.

0.020-0.065 0.0080 - 0.41 max.

275 min.

430-550 23 min.

2t 27J at 0°C

JVSTP2 6.0-16.0 900-2050 IS 2062 E 250B G-3106 SM400B

EN 10025 S275 J0

- - 0.14-0.20 0.80-1.30 0.025 0.025 0.25 max.

0.020-0.065 0.0090 - 0.41 max.

275 min.

430-550 23 min.

2t 27J at 0°C

JVST03 4.0-6.0 900-2050 IS 2062 E 250C G-3106 SM400C

EN 10025 S275J2

- - 0.12-0.18 0.75-1.20 0.025 0.025 0.20 max.

0.020-0.065 0.0080 - 0.39 max.

275 min.

430-550 23 min.

2t 27J at -20°C

JVSTP3 6.0-12.0 900-2050 IS 2062 E 250C G-3106 SM400C

EN 10025 S275J2

- - 0.14-0.20 0.80-1.30 0.025 0.025 0.20 max.

0.020-0.065 0.0090 - 0.39 max.

275 min.

430-550 23 min.

2t 27J at -20°C

JVSTT2JVSTT3

12.0-20.020.0-25.0

1000-20501250-2050

IS 2062 E 250B G-3101SS400

EN 10025 S275

ASTM - A36 BS 4360 Gr. 43 A 0.16-0.21 0.90-1.30 0.015 0.020 0.25 max.

0.020-0.065 0.0090 - 0.42 max.

275 min.

430-550 23 min.

2t -

JVSTS1 2.6-4.04.0-8.0

900-1400 900-2050

IS 2062 E 250(Fe 410 WA)

- - - St 42 Sik (Customized)

0.15-0.20 0.60-1.10 0.020 0.025 0.10-0.30 0.015 max. 0.0080 - 0.40 max.

330 min.

430-520 23 min.

t -

JVST04 2.6-4.04.0-8.0

900-1400 900-2050

IS 5986 Fe 410IS 2062 E 250 (Fe 410 WA)

G-3136 SN400A

- SAE 1018 (M) - 0.14-0.20 0.50-0.90 0.025 0.025 0.15 max.

0.020-0.070 0.0080 - 0.38 max.

310 min.

410 min. 23 min.

2t -

JVSTA4 3.0-4.04.0-8.0

900-1400 900-2050

IS 2062 Fe 410 WA G-3136 SN400A

- SAE 1018 - 0.16-0.23 0.60-1.00 0.025 0.025 0.050 max.

0.020-0.065 0.0080 - 0.38 max.

310 min.

410min.

23min.

2t -

JVSTA6 2.6-4.04.0-8.0

900-1400 900-2050

IS 2062 Fe 410WA - - - St42 Alk (Customized)

0.09-0.15 0.60-1.00 0.020 0.025 0.060 max.

0.020-0.060 0.0080 - 0.40 max.

310min.

410-500 28min.

t -

JVST07 2.0-4.04.0-8.0

900-1400 900-2050

IS 2062 E 250(Fe 410 WA)

- - SAE 1020 - 0.17-0.23 0.40-0.70 0.015 0.020 0.15 max.

0.020-0.060 0.0080 - 0.35 max.

300 min.

410min.

25 min.

t -

JVST15 3.0-4.04.0-8.0

900-1400 900-2050

- - EN 10025 S235

SAE 1015 C15, Sik 0.12-0.17 0.30-0.60 0.020 0.025 0.15-0.35 0.010 max. 0.0075 - 0.30 max.

255 min.

410min.

25 min.

t -

JVST21 5.0-12.0 900-2050 IS 2062 E 250 Cu(Fe 410 Cu-WA)

- - ASTM - A36 +Cu

BS 4360 Gr. 43 A +Cu

0.12-0.20 0.75-1.20 0.025 0.025 0.20 max.

0.020-0.065 0.0080 Cu: 0.20-0.35

- 250 min.

430-550 23 min.

2t 27 J at 0°C

JVST25 5.0-12.0 900-2050 IS 2062 E 250C Cu(Fe 410 Cu-WC)

- - - - 0.08-0.13 0.90-1.30 0.020 0.025 0.25 max.

0.020-0.065 0.0080 Cu:0.20-0.35Nb: 0.020

max.

- 250 min.

430-550 23 min.

2t -

JVST26 1.6-3.0 900-1250 IS 2062 Fe 410 Cu-WC

- - - - 0.08-0.14 1.0 max. 0.030 0.03 0.20 max.

0.020-0.065 0.0075 Cu: 0.20-0.30

- 255 min.

410-520 24 min.

t -

Hot R

olled Coils

JSW Grade Dimensional Scope equivalent international/biS Grades chemical composition (Values are in %) Mechanical Properties

Thickness (mm)

Width(mm)


P max.

Si Al N max.

Nb V Ti YS Mpa

UTSMpa

El B. T. Charpy Impact

JVHTS1 2.0-2.52.5-5.0

900-1200900-1400

IS 2062 E 350 - EN 10025 S 355 JR

- - 0.10-0.17

0.80-1.45

0.025 0.025 0.30 max.

0.020-0.065

0.0080 0.040 max.

0.05 max

0.045 max. 350 min. 490 min.

22 min. 2t 70 at 0°C

JVHT01 2.0-2.52.5-5.0

5.0-12.0

900-1200 900-1400 900-2050

IS 2062 E 350 - EN 10025 S 355 JR

- - 0.10-0.17

0.80-1.30

0.025 0.025 0.15-0.35

0.02-0.06

0.0075 0.040 max.

0.050 max.

0.045 max. 350 min. 490 min.

22 min. 2t 50 at 0°C

JVHT02JVHTP2

5.0-25.0 900-2050 IS 2062 E 350 - EN 10025 S355 J2

A572 Gr. 50 - 0.14-0.20

1.00-1.35

0.020 0.025 0.03-0.25

0.02-0.06

0.0080 0.050 max.

0.050 max.

0.040 max. 355 min. 490 min.

22 min. 2t 70 at 0°C

JVHT03 2.0-2.6 2.6-5.0

5.0-12.0

900-1250 900-1400 900-2050

IS 2062 E 350 (M) - - - Cust. 0.18-0.24

1.20-1.60

0.015 0.025 0.05-0.25

0.02-0.06

0.0080 - - - 355 min. 510 min.

20 min. on 50 Gl

2t 70 at 0°C

JVHT04 5.0-12.0 900-1600 IS 2062 E 350 (M) - - - - 0.18-0.23

1.30-1.60

0.020 0.025 0.05-0.30

0.02-0.06

0.0075 0.025 max.

- - 360 min. 550 min.

20 min. 2t 70 at 0°C

JVHT06 JVHTP6

1.6-2.02.0-3.03.0-5.0

900-1100 900-1400 900-1600

IS 5986 Fe 510 - EN 10025 S 355 JR

- - 0.14-0.20

1.00-1.40

0.020 0.025 0.10-0.30

0.02-0.06

0.0075 0.010 max.

- - 355 min. 490 min.

22 min. 2t -

JVHT08 5.0-12.0 900-2050 IS 2062 E 410 (M) - - A 607 Gr. 60 - 0.15-0.21

1.20-1.60

0.020 0.025 0.15-0.30

0.02-0.06

0.0080 0.020-0.040

- 0.010-0.040 410 min. 550 min.

20 min. 2t 70 at 0°C

JVHTE2 5.0-12.0 900-2050 IS 2062 E 350 - EN 10025 S 355 JR

- - 0.15-0.20

1.00-1.35

0.020 0.025 0.050 max.

0.02-0.06

0.0080 0.040 max.

0.050 max.

0.040 max. 355 min. 490 min.

22 min. 2t 50 at 0°C

JVHTN2JVHTS2

5.0-20.0 900-2050 IS 2062 E 350 - EN 10025 S 355 JR+N

- - 0.14-0.20

1.00-1.50

0.020 0.025 0.050 max.

0.02-0.06

0.0080 0.050 max.

0.050 max.

0.040 max. 355 min. 490 min.

22 min. 2t 50 at 0°C

HR Chequered Sheets and Plates for Structural Use


(mm)Width(mm)


P max.

Si Al N max.

Others CEV YS Mpa

UTS Mpa

El B.T.

JVCHQ1 4.0-6.0 900-1600 IS 3502 Fe 410 - - - - 0.20 max.

1.20 max.

0.035 0.035 0.25 max.

0.015-0.080 0.0090 - 0.42 max.

250min.

410min.

23min.

3t

JVCHQ2 6.0-10.0 900-2000 IS 3502 Fe 410 - - - - 0.21 max.

1.40 max.

0.035 0.035 0.25 max.

0.015-0.070 0.0090 - 0.42 max.

250min.

410min.

23min.

3t

HR Coils for High Tensile Structural Applications

31


Hot

Rol

led

Coils


Thickness (mm)

Width(mm)


P max.

Si Al N max.

Nb V Ti YS Mpa

UTSMpa

El B. T. Charpy Impact

JVHTS1 2.0-2.52.5-5.0

900-1200900-1400

IS 2062 E 350 - EN 10025 S 355 JR

- - 0.10-0.17

0.80-1.45

0.025 0.025 0.30 max.

0.020-0.065

0.0080 0.040 max.

0.05 max

0.045 max. 350 min. 490 min.

22 min. 2t 70 at 0°C

JVHT01 2.0-2.52.5-5.0

5.0-12.0

900-1200 900-1400 900-2050

IS 2062 E 350 - EN 10025 S 355 JR

- - 0.10-0.17

0.80-1.30

0.025 0.025 0.15-0.35

0.02-0.06

0.0075 0.040 max.

0.050 max.

0.045 max. 350 min. 490 min.

22 min. 2t 50 at 0°C

JVHT02JVHTP2

5.0-25.0 900-2050 IS 2062 E 350 - EN 10025 S355 J2

A572 Gr. 50 - 0.14-0.20

1.00-1.35

0.020 0.025 0.03-0.25

0.02-0.06

0.0080 0.050 max.

0.050 max.

0.040 max. 355 min. 490 min.

22 min. 2t 70 at 0°C

JVHT03 2.0-2.6 2.6-5.0

5.0-12.0

900-1250 900-1400 900-2050

IS 2062 E 350 (M) - - - Cust. 0.18-0.24

1.20-1.60

0.015 0.025 0.05-0.25

0.02-0.06

0.0080 - - - 355 min. 510 min.

20 min. on 50 Gl

2t 70 at 0°C

JVHT04 5.0-12.0 900-1600 IS 2062 E 350 (M) - - - - 0.18-0.23

1.30-1.60

0.020 0.025 0.05-0.30

0.02-0.06

0.0075 0.025 max.

- - 360 min. 550 min.

20 min. 2t 70 at 0°C

JVHT06 JVHTP6

1.6-2.02.0-3.03.0-5.0

900-1100 900-1400 900-1600

IS 5986 Fe 510 - EN 10025 S 355 JR

- - 0.14-0.20

1.00-1.40

0.020 0.025 0.10-0.30

0.02-0.06

0.0075 0.010 max.

- - 355 min. 490 min.

22 min. 2t -

JVHT08 5.0-12.0 900-2050 IS 2062 E 410 (M) - - A 607 Gr. 60 - 0.15-0.21

1.20-1.60

0.020 0.025 0.15-0.30

0.02-0.06

0.0080 0.020-0.040

- 0.010-0.040 410 min. 550 min.

20 min. 2t 70 at 0°C

JVHTE2 5.0-12.0 900-2050 IS 2062 E 350 - EN 10025 S 355 JR

- - 0.15-0.20

1.00-1.35

0.020 0.025 0.050 max.

0.02-0.06

0.0080 0.040 max.

0.050 max.

0.040 max. 355 min. 490 min.

22 min. 2t 50 at 0°C

JVHTN2JVHTS2

5.0-20.0 900-2050 IS 2062 E 350 - EN 10025 S 355 JR+N

- - 0.14-0.20

1.00-1.50

0.020 0.025 0.050 max.

0.02-0.06

0.0080 0.050 max.

0.050 max.

0.040 max. 355 min. 490 min.

22 min. 2t 50 at 0°C

HR Chequered Sheets and Plates for Structural Use


(mm)Width(mm)


P max.

Si Al N max.

Others CEV YS Mpa

UTS Mpa

El B.T.

JVCHQ1 4.0-6.0 900-1600 IS 3502 Fe 410 - - - - 0.20 max.

1.20 max.

0.035 0.035 0.25 max.

0.015-0.080 0.0090 - 0.42 max.

250min.

410min.

23min.

3t

JVCHQ2 6.0-10.0 900-2000 IS 3502 Fe 410 - - - - 0.21 max.

1.40 max.

0.035 0.035 0.25 max.

0.015-0.070 0.0090 - 0.42 max.

250min.

410min.

23min.

3t

32

Hot R

olled Coils


Thickness(mm)

Width(mm)


P max.

Si Al N max.

Nb V Ti YS Mpa

UTS Mpa

El Bend gap

JVTR01 4.0-5.05.0-12.0

900-1400900-2050

IS 2062 Fe 440 - - A607/ A572 Gr. 50 Type 1

- 0.11-0.17 0.80-1.20 0.025 0.025 0.100 max.

0.020-0.065

0.0080 0.010-0.030

- - 345 min. 450 min. 22 min. 2t

JVTRV1 2.0 -3.03.0-5.0

900-1250 900-1500

- - - A 572Gr. 50 Type2

- 0.07-0.13 0.60-0.95 0.020 0.025 0.080max.

0.020-0.070

0.0075 - 0.04-0.08 - 345 min 450 min. 22 min. t

JVTR02JVTRS2

1.6-2.52.5-4.04.0-6.0

900-1200900-1400900-1800

- - EN 10149 S315MC

A 607 Gr. 50 E34 0.05-0.10 0.50-0.90 0.020 0.025 0.100 max.

0.020-0.065

0.0075 0.010-0.035

0.050 max. 0.005-0.030 340-430 400-490 27 min. 0.5t

JVTRS3 JVTR03

2.5-4.04.0-6.0

900-1400900-1800

- - EN 10149 S355MC

A 607 Gr. 55 E38, SS4012A 0.06-0.10 0.50-1.0 0.020 0.025 0.050 max.

0.020-0.060

0.0075 0.010-0.035

0.050 max. 0.005-0.030 380-460 450-560 25 min. 0.5t

JVTRP3 6.0-20.0 900-2050 - - EN 10149 S355MC

- E38 0.07-0.12 0.85-1.35 0.020 0.025 0.050 max.

0.020-0.060

0.0075 0.015-0.040

0.050 max. 0.010-0.040 380-460 450-560 25 min. t

JVTR04 JVTRP4

3.5-5.05.0-12.0

900-1400900-2050

- - EN 10149 S460MC

A 607 Gr. 60 BSK46/ E46 0.06-0.11 0.70-1.20 0.020 0.025 0.030 max.

0.020-0.060

0.0075 0.030-0.060

0.050 max. 0.015-0.045 460-560 520-620 25 min. 0.5t

JVTR06 2.5-4.04.0-16.0

900-1250900-1400

- - - SAE 1026(M) Customized 0.22-0.28 0.60-0.90 0.020 0.025 0.150 max.

0.020-0.060

0.0080 - - - 310 min. 430 min. 20 min. 2t

JVTRT6 2.5-4.04.0-16.0

900-1250 900-1400


0.020-0.060

0.0080 - - - 330 min. 450 min. 20 min. 2 t

JVTR07 2 .5-5.05.0-8.0

900-1400900-1800

IS 2062 Fe440

- EN 10025 S275

ASTM A-572 Gr. 50

- 0.10-0.16 0.70-1.10 0.015 0.025 0.150 max.

0.020-0.065

0.0075 0.010-0.030

- 0.005-0.030 350 min. 440-550 23 min. on 50 GL

t

JVTR08 JVTRP8 JVTRT8

3.5-6.06.0-8.0

10.0-16.0

900-1400900-2050900-2050

IS 2062 E410

G-3134 SPFH 540

- - - 0.08-0.17 1.00-1.60 0.020 0.025 0.100-0.250

0.020-0.060

0.0080 0.020-0.050

0.040 max. 0.015-0.040 410 min. 540 min. 20 min. 2t

JVTR09 2.5-5.0 900-1250 IS 2062 E450

G-3134 SPFH 590

- - - 0.05-0.12 1.00-1.70 0.020 0.025 0.250 max.

0.020-0.060

0.0075 0.060 max.

0.040 max. 0.040 max. 450-600 590-650 20-32 min. on 80 GL

t

JVTR10 4.0-10.0 900-1600 - G-3113 SAPH400 - - - 0.06-0.12 0.25-0.50 0.020 0.025 0.050 max.

0.020-0.060

0.0075 0.035 max.

- 0.030 max. 280 min. 400 min. 28 min. on 50 GL

0.5t

JVTR11 1.6-2.02.0-2.52.5-4.5

900-1050900-1250900-1600

IS 5986 Fe510

- EN 10025 E295 ASTM A 572 Gr. 50

- 0.08-0.14 0.70-1.10 0.020 0.020 0.150 max.

0.020-0.065

0.0080 0.010-0.030

0.010-0.040 0.025 max. 355 min. 510-630 23 min. on 50 GL

t

JVTR12 1.6-2.52.5-5.0

900-1100900-1600

- G-3113 SAPH440

- ASTM A 572 Gr. 42

St 44 (Cust.) 0.04-0.09 0.50-0.80 0.020 0.025 0.050 max.

0.020-0.060

0.0075 0.035 max.

- 0.030 max. 320 min. 430-490 25 min. on 50GL

Cl.

JVTR13 4.0-10.0 900-1600 - - - - HSLA Mod 0.05-0.10 0.25-0.50 0.020 0.020 0.050 max.

0.020-0.060

0.0070 0.010-0.030

- 0.010-0.035 280 min. 400 min. 25 min. on 50 GL

Cl.

JVTR15 1.6-2.02.0-3.5

900-1100900-1400

- - EN 10149 S355MC

ASTM A 572 Gr. 50

- 0.07-0.12 0.60-1.00 0.020 0.020 0.150 max.

0.020-0.065

0.0075 0.010-0.035


Cl.

JVTR16 3.2-5.0 900-1600 - - - - St 44 (Cust.) 0.12-0.17 0.40-0.70 0.020 0.020 0.050 max.

0.020-0.060

0.0075 0.010-0.030

- 0.025 max. 320 min. 430-510 25 min. on 50 GL

0.5t

JVTRS7JVTR17JVTRP7

2.5-5.05.0-12.0

12.0-20.0

900-1250900-2050900-2050

- G-3134 SPFH 490 EN 10149 S420MC

- - 0.06-0.11 0.8-1.40 0.015 0.020 0.050 max.

0.020-0.060

0.0075 0.050 max.

0.040 max. 0.040 max. 420 min. 490 min. 20 min. t

JVTR18 5.0-10.0 900-2050 - G-3134 SPFH 540 - - - 0.06-0.11 1.00-1.60 0.015 0.020 0.250 max.

0.020-0.060

0.0075 0.050 max.

0.040 max. 0.040 max. 410 min. 540 min. 20 min. 2t

33

HR Coils of HSLA Grade for Automobile and Other Engineering Applications


Hot

Rol

led

Coils

34


Thickness(mm)

Width(mm)


P max.

Si Al N max.

Nb V Ti YS Mpa

UTS Mpa

El Bend gap

JVTR01 4.0-5.05.0-12.0

900-1400900-2050

IS 2062 Fe 440 - - A607/ A572 Gr. 50 Type 1

- 0.11-0.17 0.80-1.20 0.025 0.025 0.100 max.

0.020-0.065

0.0080 0.010-0.030

- - 345 min. 450 min. 22 min. 2t

JVTRV1 2.0 -3.03.0-5.0

900-1250 900-1500

- - - A 572Gr. 50 Type2

- 0.07-0.13 0.60-0.95 0.020 0.025 0.080max.

0.020-0.070

0.0075 - 0.04-0.08 - 345 min 450 min. 22 min. t

JVTR02JVTRS2

1.6-2.52.5-4.04.0-6.0

900-1200900-1400900-1800

- - EN 10149 S315MC

A 607 Gr. 50 E34 0.05-0.10 0.50-0.90 0.020 0.025 0.100 max.

0.020-0.065

0.0075 0.010-0.035

0.050 max. 0.005-0.030 340-430 400-490 27 min. 0.5t

JVTRS3 JVTR03

2.5-4.04.0-6.0

900-1400900-1800

- - EN 10149 S355MC

A 607 Gr. 55 E38, SS4012A 0.06-0.10 0.50-1.0 0.020 0.025 0.050 max.

0.020-0.060

0.0075 0.010-0.035

0.050 max. 0.005-0.030 380-460 450-560 25 min. 0.5t

JVTRP3 6.0-20.0 900-2050 - - EN 10149 S355MC

- E38 0.07-0.12 0.85-1.35 0.020 0.025 0.050 max.

0.020-0.060

0.0075 0.015-0.040

0.050 max. 0.010-0.040 380-460 450-560 25 min. t

JVTR04 JVTRP4

3.5-5.05.0-12.0

900-1400900-2050

- - EN 10149 S460MC

A 607 Gr. 60 BSK46/ E46 0.06-0.11 0.70-1.20 0.020 0.025 0.030 max.

0.020-0.060

0.0075 0.030-0.060

0.050 max. 0.015-0.045 460-560 520-620 25 min. 0.5t

JVTR06 2.5-4.04.0-16.0

900-1250900-1400


0.020-0.060

0.0080 - - - 310 min. 430 min. 20 min. 2t

JVTRT6 2.5-4.04.0-16.0

900-1250 900-1400


0.020-0.060

0.0080 - - - 330 min. 450 min. 20 min. 2 t

JVTR07 2 .5-5.05.0-8.0

900-1400900-1800

IS 2062 Fe440

- EN 10025 S275

ASTM A-572 Gr. 50

- 0.10-0.16 0.70-1.10 0.015 0.025 0.150 max.

0.020-0.065

0.0075 0.010-0.030

- 0.005-0.030 350 min. 440-550 23 min. on 50 GL

t

JVTR08 JVTRP8 JVTRT8

3.5-6.06.0-8.0

10.0-16.0

900-1400900-2050900-2050

IS 2062 E410

G-3134 SPFH 540

- - - 0.08-0.17 1.00-1.60 0.020 0.025 0.100-0.250

0.020-0.060

0.0080 0.020-0.050

0.040 max. 0.015-0.040 410 min. 540 min. 20 min. 2t

JVTR09 2.5-5.0 900-1250 IS 2062 E450

G-3134 SPFH 590

- - - 0.05-0.12 1.00-1.70 0.020 0.025 0.250 max.

0.020-0.060

0.0075 0.060 max.

0.040 max. 0.040 max. 450-600 590-650 20-32 min. on 80 GL

t

JVTR10 4.0-10.0 900-1600 - G-3113 SAPH400 - - - 0.06-0.12 0.25-0.50 0.020 0.025 0.050 max.

0.020-0.060

0.0075 0.035 max.


0.5t

JVTR11 1.6-2.02.0-2.52.5-4.5

900-1050900-1250900-1600

IS 5986 Fe510

- EN 10025 E295 ASTM A 572 Gr. 50

- 0.08-0.14 0.70-1.10 0.020 0.020 0.150 max.

0.020-0.065

0.0080 0.010-0.030

0.010-0.040 0.025 max. 355 min. 510-630 23 min. on 50 GL

t

JVTR12 1.6-2.52.5-5.0

900-1100900-1600

- G-3113 SAPH440

- ASTM A 572 Gr. 42

St 44 (Cust.) 0.04-0.09 0.50-0.80 0.020 0.025 0.050 max.

0.020-0.060

0.0075 0.035 max.

- 0.030 max. 320 min. 430-490 25 min. on 50GL

Cl.

JVTR13 4.0-10.0 900-1600 - - - - HSLA Mod 0.05-0.10 0.25-0.50 0.020 0.020 0.050 max.

0.020-0.060

0.0070 0.010-0.030

- 0.010-0.035 280 min. 400 min. 25 min. on 50 GL

Cl.

JVTR15 1.6-2.02.0-3.5

900-1100900-1400

- - EN 10149 S355MC

ASTM A 572 Gr. 50

- 0.07-0.12 0.60-1.00 0.020 0.020 0.150 max.

0.020-0.065

0.0075 0.010-0.035


Cl.

JVTR16 3.2-5.0 900-1600 - - - - St 44 (Cust.) 0.12-0.17 0.40-0.70 0.020 0.020 0.050 max.

0.020-0.060

0.0075 0.010-0.030

- 0.025 max. 320 min. 430-510 25 min. on 50 GL

0.5t

JVTRS7JVTR17JVTRP7

2.5-5.05.0-12.0

12.0-20.0

900-1250900-2050900-2050

- G-3134 SPFH 490 EN 10149 S420MC

- - 0.06-0.11 0.8-1.40 0.015 0.020 0.050 max.

0.020-0.060

0.0075 0.050 max.

0.040 max. 0.040 max. 420 min. 490 min. 20 min. t

JVTR18 5.0-10.0 900-2050 - G-3134 SPFH 540 - - - 0.06-0.11 1.00-1.60 0.015 0.020 0.250 max.

0.020-0.060

0.0075 0.050 max.

0.040 max. 0.040 max. 410 min. 540 min. 20 min. 2t

Hot R

olled Coils


Thickness (mm)

Width(mm)


P max.

Si Al N max.

Nb Mo YS Mpa

UTSMpa

El B. T. Hardness

JVBQ01 2.0-4.04.0-6.0

900-1400 900-2050

IS 2002 Gr. 1 - - ASTM-A516 Gr. 55A 285 Gr. C

- 0.10-0.16

0.60-0.90

0.020 0.025 0.10-0.25

0.020-0.050

0.0075 - - 205 min. 220 min.

380-515415-550

21 min.27 min.

t -

JVBQ02 2.5-4.55.0-10.0

900-1400 900-2050

IS 2002 Gr. 2 - - ASTM-A516Gr. 60

- 0.14-0.20

0.70-1.20

0.020 0.025 0.15-0.40

0.020 max.

0.0075 - - 220 min. 415-550 25 min. on 50 GL

2t -

JVBQ03 5.0-10.0 900-1800 - - - - 16 Mo3 0.14-0.20

0.60-1.00

0.015 0.020 0.15-0.35

0.020-0.060

0.0075 - 0.20-0.40

275 min. 420 min. 27 min. t -

JVBQ04 2.2-4.04.0-6.0

900-1400 900-2050

IS 10748 Gr. 2 - - A 178 Gr. A - 0.07-0.12

0.40-0.60

0.020 0.025 0.10-0.25

0.020-0.060

0.0080 - - 240 min. 350-450 25 min. on 50 GL

t 75 RB max.

JVBQ06 2.2-4.04.0-6.0

900-1400 900-2050

IS 10748 Gr. 2 - - - Customized 0.05-0.10

0.30-0.50

0.020 0.025 0.05-0.20

0.020-0.060

0.0075 - - 210 min. 340 min. 25 min. on 50 GL

t 75 RB max.

JVBQ07 5.0-10.0 900-2050 - - - A 516 Gr. 70 - 0.18-0.24

0.85-1.20

0.020 0.025 0.15-0.40

0.020-0.060

0.0075 - - 260 min. 485-620 21 min. on 50 GL

2t -

JVBQ08 2.5-4.55.0-12.0

900-1400 900-2050

- - - ASTM-A515Gr. 60

- 0.15-0.20

0.60-0.90

0.015 0.025 0.15-0.40

0.020-0.060

0.0075 - - 240 min. 415-550 25 min. on 50 GL

2t -

HR Coils for Simple Pressure Vessels

HR Coils for Boiler Tubes and Pressure Vessels


Thickness (mm)

Width(mm)


P max.

Si Al N max.

Nb Mo YS Mpa

UTSMpa

Elmin.

B. T. Charpy Impact

JVLP01 2.5-4.0 900-1650 IS 6240-2008 - EN: 10028-2 P235 ASTM A 285 Gr. B - 0.05-0.10

0.40-0.70

0.015 0.020 0.02-0.10

0.020-0.065

0.0065 0.005 max.

- 240 min. 185 min.

350-450 345-385

25 t 10J min. @ -10°C

JVLP02 2.6-4.04.0-6.0

900-1400900-2050

IS 6240-2008 JIS-G 3116 SG255

EN:10207 SPH 265 ASTM A 285 Gr. B BS 1501Gr. 360-161

0.07-0.12

0.50-0.90

0.020 0.020 0.02-0.12

0.020-0.065

0.0065 - - 240 min. 255 min.

350-450 400-480

25 t -

JVLP03 2.5-4.0 900-1600 - JIS-G 3116 SG255

EN:10207 SPH 265 ASTM A 285 Gr. C BS 5045 Pt II, Type B

0.08-0.14

0.70-1.00

0.020 0.020 0.05-0.15

0.020-0.065

0.0065 - - 275 min. 255 min.

400-490 380-515

29 t -

JVLP04 2.6-4.0 900-1600 - JIS-G 3116 SG 295

- - - 0.07-0.12

0.70-1.10

0.020 0.020 0.04-0.15

0.020-0.065

0.0065 0.025max.

- 295 min. 440-510 26 t -

35


Hot

Rol

led

Coils

36


Thickness (mm)

Width(mm)


P max.

Si Al N max.

Nb Mo YS Mpa

UTSMpa

El B. T. Hardness

JVBQ01 2.0-4.04.0-6.0

900-1400 900-2050

IS 2002 Gr. 1 - - ASTM-A516 Gr. 55A 285 Gr. C

- 0.10-0.16

0.60-0.90

0.020 0.025 0.10-0.25

0.020-0.050

0.0075 - - 205 min. 220 min.

380-515415-550

21 min.27 min.

t -

JVBQ02 2.5-4.55.0-10.0

900-1400 900-2050

IS 2002 Gr. 2 - - ASTM-A516Gr. 60

- 0.14-0.20

0.70-1.20

0.020 0.025 0.15-0.40

0.020 max.

0.0075 - - 220 min. 415-550 25 min. on 50 GL

2t -

JVBQ03 5.0-10.0 900-1800 - - - - 16 Mo3 0.14-0.20

0.60-1.00

0.015 0.020 0.15-0.35

0.020-0.060

0.0075 - 0.20-0.40

275 min. 420 min. 27 min. t -

JVBQ04 2.2-4.04.0-6.0

900-1400 900-2050

IS 10748 Gr. 2 - - A 178 Gr. A - 0.07-0.12

0.40-0.60

0.020 0.025 0.10-0.25

0.020-0.060

0.0080 - - 240 min. 350-450 25 min. on 50 GL

t 75 RB max.

JVBQ06 2.2-4.04.0-6.0

900-1400 900-2050

IS 10748 Gr. 2 - - - Customized 0.05-0.10

0.30-0.50

0.020 0.025 0.05-0.20

0.020-0.060

0.0075 - - 210 min. 340 min. 25 min. on 50 GL

t 75 RB max.

JVBQ07 5.0-10.0 900-2050 - - - A 516 Gr. 70 - 0.18-0.24

0.85-1.20

0.020 0.025 0.15-0.40

0.020-0.060

0.0075 - - 260 min. 485-620 21 min. on 50 GL

2t -

JVBQ08 2.5-4.55.0-12.0

900-1400 900-2050

- - - ASTM-A515Gr. 60

- 0.15-0.20

0.60-0.90

0.015 0.025 0.15-0.40

0.020-0.060

0.0075 - - 240 min. 415-550 25 min. on 50 GL

2t -


Thickness (mm)

Width(mm)


P max.

Si Al N max.

Nb Mo YS Mpa

UTSMpa

Elmin.

B. T. Charpy Impact

JVLP01 2.5-4.0 900-1650 IS 6240-2008 - EN: 10028-2 P235 ASTM A 285 Gr. B - 0.05-0.10

0.40-0.70

0.015 0.020 0.02-0.10

0.020-0.065

0.0065 0.005 max.

- 240 min. 185 min.

350-450 345-385

25 t 10J min. @ -10°C

JVLP02 2.6-4.04.0-6.0

900-1400900-2050

IS 6240-2008 JIS-G 3116 SG255

EN:10207 SPH 265 ASTM A 285 Gr. B BS 1501Gr. 360-161

0.07-0.12

0.50-0.90

0.020 0.020 0.02-0.12

0.020-0.065

0.0065 - - 240 min. 255 min.

350-450 400-480

25 t -

JVLP03 2.5-4.0 900-1600 - JIS-G 3116 SG255

EN:10207 SPH 265 ASTM A 285 Gr. C BS 5045 Pt II, Type B

0.08-0.14

0.70-1.00

0.020 0.020 0.05-0.15

0.020-0.065

0.0065 - - 275 min. 255 min.

400-490 380-515

29 t -

JVLP04 2.6-4.0 900-1600 - JIS-G 3116 SG 295

- - - 0.07-0.12

0.70-1.10

0.020 0.020 0.04-0.15

0.020-0.065

0.0065 0.025max.

- 295 min. 440-510 26 t -

Hot R

olled Coils


Thickness (mm)

Width(mm)


P max.

Si Al Nmax.

Cr Others CEV Hardness

JVCM01 2.2-3.53.5-6.0

900-1250 900-1400

IS:5517-37 C 15 - SAE 1030 (Mod) C 30 (Cust.) 0.26-0.33 1.20-1.60 0.020 0.025 0.10-0.25 0.020-0.060 0.0080 - - 0.50-0.58 95 RBmax.

JVCMA1 2.2-3.53.5-6.0

900-1250 900-1400

- - - C 25 0.23-0.28 1.10-1.70 0.020 0.025 0.05-0.25 0.020-0.060 0.0075 - - 0.41-0.56 95 RBmax.

JVCMB1 2.5-3.53.5-6.0

900-1250 900-1400

- - - C 30 + B 0.24-0.32 1.00-1.50 0.020 0.025 0.10-0.35 0.020-0.060 0.0080 0.15max.

B:15-50ppm

0.41-0.56 95 RBmax.

JVCM02/JVCMT2

2.2-3.53.5-6.0

900-1250 900-1400

IS:5517-40 C 8 EN 10083 Ck 40 (M)

SAE 1040 MC 11, C 40 0.38-0.45 0.50-0.90 0.020 0.025 0.05-0.30 0.005-0.060 0.0090 - - 0.50-0.58 95 RBmax.

JVCM04 2.2-3.53.5-6.0

900-1250900-1400

- EN 10083C 45

SAE 1045 C 45 0.43-0.50 0.50-0.90 0.020 0.020 0.10-0.30 0.020-0.060 0.0080 0.15-0.35 - 0.52-0.65 95 RBmax.

JVCM05 2.2-3.53.5-6.0

900-1250 900-1400

- EN 10083C 50

SAE 1050 C 50 0.47-0.54 0.50-0.90 0.020 0.025 0.10-0.30 0.020-0.060 0.0080 - - 0.56-0.66 95 RBmax.

JVCM03 2.2-3.53.5-6.0

900-1250900-1400

- - SAE 1055 C 55, MC 12 0.50-0.58 0.50-0.90 0.020 0.025 0.15-0.35 0.005-0.045 0.0080 0.15max.

- 0.60-0.70 95 RBmax.

JVCMT3 2.2-3.53.5-6.0

900-1250 900-1400

- - SAE 1055 C 55, MC 12 0.50-0.58 0.50-0.90 0.020 0.025 0.15-0.35 0.010-0.040 0.0080 0.15-0.35 - 0.60-0.72 95 RBmax.

JVCMS5 2.3-2.82.8-5.0

900-1250 900-1400

- EN 10083C 50

SAE 1055 C 50 0.49-0.56 0.60-0.75 0.020 0.025 0.10-0.30 0.015-0.055 0.0080 - - 0.59-0.69 95 RBmax.

JVCMT5 2.2-2.82.8-6.0

900-1250 900-1400

- EN 10083C 50

SAE 1055 C 50 0.48-0.55 0.60-0.80 0.020 0.025 0.15-0.30 0.020 max. 0.0080 0.15-0.35 - 0.58-0.68 95 RB / 28 RC

JVCM06 2.5-3.53.5-6.0

900-1250 900-1400

- EN 10083 C 60

SAE 1060 C 60 0.57-0.63 0.50-0.90 0.020 0.025 0.10-0.30 0.015-0.055 0.0080 - - 0.67-0.76 95 RBmax.

JVCMP6 2.5-3.53.5-6.0

900-1250 900-1400

- EN 10083 C 60

SAE 1060(M) C 60 (Cust.) 0.59-0.65 0.60-0.90 0.020 0.025 0.15-0.30 0.020-0.050 0.0080 0.15max.

Ni:0.20 max. Mo:0.03 max.

0.70-0.80 32 RCmax.

JVCMT6 2.5-3.53.5-6.0

900-1250 900-1400

- EN 10083 C 60

SAE 1060(M) C 60 (Cust.) 0.60-0.65 0.60-0.90 0.020 0.025 0.15-0.30 0.020-0.050 0.0080 0.15-0.35 - 0.70-0.80 32 RCmax.

JVCM30 3.0-3.63.5-5.0

900-1250 900-1400

IS:5517-37 C 15 - SAE1536(M) Cust. 0.35-0.41 1.30-1.60 0.020 0.025 0.02-0.10 0.020-0.060 0.0080 - - 0.56-0.66 95 RB / 28 RC

JVCM31 3.0-3.63.7-5.0

900-1250 900-1400

IS:5517-37 C 15 - SAE1541(M) Cust. 0.38-0.45 1.30-1.60 0.020 0.025 0.10-0.25 0.020-0.060 0.0080 0.15max.

- 0.60-0.72 95 RB / 28 RC

JVCM35 2.2-3.53.5-6.0

900-1250 900-1400

IS:1570- C 35 Mn 75

EN 10083Ck 35 (M)

SAE 1035 C 35 0.32-0.38 0.50-0.90 0.020 0.025 0.05-0.25 0.005-0.045 0.0080 - - 0.43-0.52 95 RBmax.

JVCM36 2.2-3.53.5-6.0

900-1250 900-1400

- - SAE 1036 C 36 0.35-0.41 0.60-1.00 0.020 0.025 0.10-0.30 0.005-0.045 0.0080 - - 0.48-0.58 95 RBmax.

37

HR Coils of Medium Carbon Un-alloyed Grades


Hot

Rol

led

Coils

38


Thickness (mm)

Width(mm)


P max.

Si Al Nmax.

Cr Others CEV Hardness

JVCM01 2.2-3.53.5-6.0

900-1250 900-1400

IS:5517-37 C 15 - SAE 1030 (Mod) C 30 (Cust.) 0.26-0.33 1.20-1.60 0.020 0.025 0.10-0.25 0.020-0.060 0.0080 - - 0.50-0.58 95 RBmax.

JVCMA1 2.2-3.53.5-6.0

900-1250 900-1400

- - - C 25 0.23-0.28 1.10-1.70 0.020 0.025 0.05-0.25 0.020-0.060 0.0075 - - 0.41-0.56 95 RBmax.

JVCMB1 2.5-3.53.5-6.0

900-1250 900-1400

- - - C 30 + B 0.24-0.32 1.00-1.50 0.020 0.025 0.10-0.35 0.020-0.060 0.0080 0.15max.

B:15-50ppm

0.41-0.56 95 RBmax.

JVCM02/JVCMT2

2.2-3.53.5-6.0

900-1250 900-1400

IS:5517-40 C 8 EN 10083 Ck 40 (M)

SAE 1040 MC 11, C 40 0.38-0.45 0.50-0.90 0.020 0.025 0.05-0.30 0.005-0.060 0.0090 - - 0.50-0.58 95 RBmax.

JVCM04 2.2-3.53.5-6.0

900-1250900-1400

- EN 10083C 45

SAE 1045 C 45 0.43-0.50 0.50-0.90 0.020 0.020 0.10-0.30 0.020-0.060 0.0080 0.15-0.35 - 0.52-0.65 95 RBmax.

JVCM05 2.2-3.53.5-6.0

900-1250 900-1400

- EN 10083C 50

SAE 1050 C 50 0.47-0.54 0.50-0.90 0.020 0.025 0.10-0.30 0.020-0.060 0.0080 - - 0.56-0.66 95 RBmax.

JVCM03 2.2-3.53.5-6.0

900-1250900-1400

- - SAE 1055 C 55, MC 12 0.50-0.58 0.50-0.90 0.020 0.025 0.15-0.35 0.005-0.045 0.0080 0.15max.

- 0.60-0.70 95 RBmax.

JVCMT3 2.2-3.53.5-6.0

900-1250 900-1400

- - SAE 1055 C 55, MC 12 0.50-0.58 0.50-0.90 0.020 0.025 0.15-0.35 0.010-0.040 0.0080 0.15-0.35 - 0.60-0.72 95 RBmax.

JVCMS5 2.3-2.82.8-5.0

900-1250 900-1400

- EN 10083C 50

SAE 1055 C 50 0.49-0.56 0.60-0.75 0.020 0.025 0.10-0.30 0.015-0.055 0.0080 - - 0.59-0.69 95 RBmax.

JVCMT5 2.2-2.82.8-6.0

900-1250 900-1400

- EN 10083C 50

SAE 1055 C 50 0.48-0.55 0.60-0.80 0.020 0.025 0.15-0.30 0.020 max. 0.0080 0.15-0.35 - 0.58-0.68 95 RB / 28 RC

JVCM06 2.5-3.53.5-6.0

900-1250 900-1400

- EN 10083 C 60

SAE 1060 C 60 0.57-0.63 0.50-0.90 0.020 0.025 0.10-0.30 0.015-0.055 0.0080 - - 0.67-0.76 95 RBmax.

JVCMP6 2.5-3.53.5-6.0

900-1250 900-1400

- EN 10083 C 60

SAE 1060(M) C 60 (Cust.) 0.59-0.65 0.60-0.90 0.020 0.025 0.15-0.30 0.020-0.050 0.0080 0.15max.

Ni:0.20 max. Mo:0.03 max.

0.70-0.80 32 RCmax.

JVCMT6 2.5-3.53.5-6.0

900-1250 900-1400

- EN 10083 C 60

SAE 1060(M) C 60 (Cust.) 0.60-0.65 0.60-0.90 0.020 0.025 0.15-0.30 0.020-0.050 0.0080 0.15-0.35 - 0.70-0.80 32 RCmax.

JVCM30 3.0-3.63.5-5.0

900-1250 900-1400

IS:5517-37 C 15 - SAE1536(M) Cust. 0.35-0.41 1.30-1.60 0.020 0.025 0.02-0.10 0.020-0.060 0.0080 - - 0.56-0.66 95 RB / 28 RC

JVCM31 3.0-3.63.7-5.0

900-1250 900-1400

IS:5517-37 C 15 - SAE1541(M) Cust. 0.38-0.45 1.30-1.60 0.020 0.025 0.10-0.25 0.020-0.060 0.0080 0.15max.

- 0.60-0.72 95 RB / 28 RC

JVCM35 2.2-3.53.5-6.0

900-1250 900-1400

IS:1570- C 35 Mn 75

EN 10083Ck 35 (M)

SAE 1035 C 35 0.32-0.38 0.50-0.90 0.020 0.025 0.05-0.25 0.005-0.045 0.0080 - - 0.43-0.52 95 RBmax.

JVCM36 2.2-3.53.5-6.0

900-1250 900-1400

- - SAE 1036 C 36 0.35-0.41 0.60-1.00 0.020 0.025 0.10-0.30 0.005-0.045 0.0080 - - 0.48-0.58 95 RBmax.

Hot R

olled Coils


Thickness(mm)

Width(mm)


P Si Al Nmax.

Cr Ni Cu Mo YS Mpa

UTS Mpa

El Bend gap

JVWR01 2.8-4.04.0-6.0

900-1200 900-1600

- - - - IRS-M41 0.10 max.

0.25-0.50 0.025 0.070-0.140 0.28-0.45 0.030 max.

0.0075 0.35-0.60 0.20-0.40

0.28-0.50

- 345 min.

480 min.

22min.

t

JVWR02/ JVWRT2

2.8-4.04.0-6.0

900-1200 900-1600

- G-3125 SPA-H

EN 10025 S355J2WP

(CORTEN-A) BS 4360 WR50A

0.05-0.12 0.25-0.60 0.025 0.070-0.150 0.25-0.50 0.050 max.

0.0075 0.30-0.60 0.20-0.35

0.20-0.45

- 345 min.

480 min.

22min.

t

JVWR04 5.0-8.0 900-1600 - G-4105 SCM 415

- - - 0.12-0.18 0.50-0.90 0.025 0.030 max. 0.10-0.30 0.020-0.065

0.0075 0.80-1.30 - - 0.15-0.30

380 min.

510 min.

20 min. on

50 GL

t

JVWR05 2.6-4.04.0-8.0

900-1250 900-1600

IS 1570/ IS 4432-15

Cr 65

- - AISI 5015 15 Cr3 (Cust) 0.12-0.18 0.40-0.70 0.020 0.025 max. 0.10-0.30 0.020-0.060

0.0075 0.30-1.00 - - - 350 min.

450 min.

20 min. on

50GL

t

JVWR06 3.5-5.0 900-1250 IS 1570-50Cr 4V23

- EN 10083-51 Cr V4

- 50 CrV4 0.48-0.58 0.60-1.10 0.020 0.025 max. 0.10-0.30 0.050 max.

0.0080 0.90-1.40 0.10-0.25

- - - - - -

JVWR07 5.0-8.0 900-1600 IS 1570-17 Mn Cr 95

- EN 10132-2 16Mn Cr 5

- - 0.14-0.19 1.00-1.40 0.020 0.025 max. 0.10-0.35 0.020-0.060

0.0080 0.80-1.20 - - - 360 min.

500 max.

20 min. on

50 GL

t

JVWR08 5.0-8.0 900-1600 - G-4105 SCM 420

- - - 0.17-0.22 0.60-1.00 0.020 0.025 max. 0.10-0.30 0.020-0.060

0.0075 0.80-1.20 0.35-0.55

- 0.15-0.30

- - - -

JVWR09 3.5-6.0 900-1600 IS 1570-58Cr 4V23

- - - 58CrV4 0.54-0.62 0.60-1.00 0.020 0.025 max. 0.10-0.30 0.050 max.

0.0080 0.90-1.30 0.10-0.25

- - - - - -

JVWR10 6.0-8.0 900-1600 - G-4105 SCM 435

- - Cust. 0.32-0.40 0.50-0.90 0.020 0.025 max. 0.15-0.35 0.020-0.065

0.0090 0.80-1.20 - - 0.15-0.30

- - - t

39

HR Coils of Atmospheric Corrosion Resistance and other Chromium Alloyed


Hot

Rol

led

Coils

40


Thickness(mm)

Width(mm)


P Si Al Nmax.

Cr Ni Cu Mo YS Mpa

UTS Mpa

El Bend gap

JVWR01 2.8-4.04.0-6.0

900-1200 900-1600

- - - - IRS-M41 0.10 max.

0.25-0.50 0.025 0.070-0.140 0.28-0.45 0.030 max.

0.0075 0.35-0.60 0.20-0.40

0.28-0.50

- 345 min.

480 min.

22min.

t

JVWR02/ JVWRT2

2.8-4.04.0-6.0

900-1200 900-1600

- G-3125 SPA-H

EN 10025 S355J2WP

(CORTEN-A) BS 4360 WR50A

0.05-0.12 0.25-0.60 0.025 0.070-0.150 0.25-0.50 0.050 max.

0.0075 0.30-0.60 0.20-0.35

0.20-0.45

- 345 min.

480 min.

22min.

t

JVWR04 5.0-8.0 900-1600 - G-4105 SCM 415

- - - 0.12-0.18 0.50-0.90 0.025 0.030 max. 0.10-0.30 0.020-0.065

0.0075 0.80-1.30 - - 0.15-0.30

380 min.

510 min.

20 min. on

50 GL

t

JVWR05 2.6-4.04.0-8.0

900-1250 900-1600

IS 1570/ IS 4432-15

Cr 65

- - AISI 5015 15 Cr3 (Cust) 0.12-0.18 0.40-0.70 0.020 0.025 max. 0.10-0.30 0.020-0.060

0.0075 0.30-1.00 - - - 350 min.

450 min.

20 min. on

50GL

t

JVWR06 3.5-5.0 900-1250 IS 1570-50Cr 4V23

- EN 10083-51 Cr V4

- 50 CrV4 0.48-0.58 0.60-1.10 0.020 0.025 max. 0.10-0.30 0.050 max.

0.0080 0.90-1.40 0.10-0.25

- - - - - -

JVWR07 5.0-8.0 900-1600 IS 1570-17 Mn Cr 95

- EN 10132-2 16Mn Cr 5

- - 0.14-0.19 1.00-1.40 0.020 0.025 max. 0.10-0.35 0.020-0.060

0.0080 0.80-1.20 - - - 360 min.

500 max.

20 min. on

50 GL

t

JVWR08 5.0-8.0 900-1600 - G-4105 SCM 420

- - - 0.17-0.22 0.60-1.00 0.020 0.025 max. 0.10-0.30 0.020-0.060

0.0075 0.80-1.20 0.35-0.55

- 0.15-0.30

- - - -

JVWR09 3.5-6.0 900-1600 IS 1570-58Cr 4V23

- - - 58CrV4 0.54-0.62 0.60-1.00 0.020 0.025 max. 0.10-0.30 0.050 max.

0.0080 0.90-1.30 0.10-0.25

- - - - - -

JVWR10 6.0-8.0 900-1600 - G-4105 SCM 435

- - Cust. 0.32-0.40 0.50-0.90 0.020 0.025 max. 0.15-0.35 0.020-0.065

0.0090 0.80-1.20 - - 0.15-0.30

- - - t

Hot Rolled Plates

Dimensions & Tolerances

Plate Specifications

Product Range Minimum Maximum

Thickness 8 mm 25.4 mm

Width 1000 mm 2050 mm

Length 2000 mm 12000 mm

Bundle Weight - 6000 kgs.

Tolerances

length

- Upto 5 mtrs. -0 / +5 mm

- Above 5 mtrs. -0 / +8 mm

Flatness 25 I units / 10 mm

capability Matrix

For Grades Upto yS : 450 Mpa and TS : 590 Mpa

- (8 mm - 25.4 mm) X (1000 - 2050 mm)

For Grades 450 Mpa < yS < 600 Mpa and 590 Mpa < TS < 800 Mpa

- (8 mm - 20 mm) X (1000 - 2050 mm)

- (20 mm - 22 mm) X (1000 - 1600 mm)

Hot

Rol

led

Plat

es

42

Hot Rolled-Pickled & Oiled (HRPO) / Skin Passed, Pickled & Oiled (HRSPO)

Dimensions & TolerancesPRoDUcT WiSe ThickneSS & WiDTh liMiTS

Product Thickness (mm) Width (mm)

HRPO 1.6 - 6.0 1650

HRSPO 1.6 - 2.6 1650

ShAPe ToleRAnce

nominal Thickness (mm) nominal Width(mm)

Tolerance on Flatness (wave height, mm)

hRPo

1.60 - 6.00

≤1200 15

>1200, ≤1500 18

>1500 23

hRSPo

1.60 - 2.60

≤1200 8

>1200, ≤1500 9

>1500 12

WiDTh ToleRAnce

Width (mm) Tolerance (mm)

As Rolled edge Trimmed edge

(+) (-) (+) (-)

≤1200 20 0 2 0

>1200, ≤1500 20 0 2 0

>1500 20 0 3 0

HR

PO /

HR

SPO

44

Hot Rolled Products - Service Centre

46

Hot

Rol

led

Prod

ucts

-

Serv

ice

Cent

re

Service Centre

cut-To-length Facility

cTl - 1 cTl - 2

Capacity (tons/annum) 1,25,000 3,00,000

Thickness (mm) 1.60 - 7.00 3.00 - 10.00

Width (mm) 800 - 1,600 1,500

Length (mm) 1,000 - 7,000 2,500 - 12,000

Bundle Weight (tons) 7 7

Slitting Facility

Annual Production (tons) 2,50,000

Line Speed (mpm) 150

Thickness (mm) 1.60 - 7.0

input Material Specifications

Inner Diameter of Coil (mm) 610/710 - 760

Outer Diameter of Coil (mm) 800 - 2,000

Weight of Coils, max. (tons) 30

Width of Coil (mm) 900 - 1,650

output Material Specifications

Inner Diameter of Coil (mm) 740

Outer Diameter of Coil (mm) 800 - 2,000

Weight of Coils, max. (tons) 30

Minimum Slit Width (mm) 100

length Tolerance

Length (mm) Tolerance (mm)

Upto 2000 +5/-0

>2000, ≤4000 +8/-0

>4000, ≤7000 +10/-0

Diagonal Tolerance

Length (mm) Tolerance (mm)

>1000, ≤2000 3

>2000, ≤4000 5

>4000, ≤7000 8

Cold Rolled Closed Annealed


49

classification en Standard JiS G 3141:2005 ASTMA 1008 iS513 JFS

CQ DC01 SPCC CS type A & B CR1 JSC270C

DQ DC01 SPCD CS type C CR2 JSC270D

DDQ DC03 SPCE DS type A & B CR3 JSC270E

EDDQ DC04 SPCF DDS CR4 JSC270F

IF DC06 SPCG EDDS CR5 JSC260G

HIF 350 HC220Y - - - JSC340P

HIF 390 HC260Y - - - JSC390P

High Strength Microalloyed steel

HC260LA - - - -

HC300LA - - - -

HC340LA - - - JSC440R

HC380LA - - - -

HC420LA - - - -

C – Mn High Strength Steel

- SPFC 350 - JSC340W

- SPFC 390 - - JSC390W

- SPFC 440 - - JSC440W

Grades & Standards

Cold

Rol

led

Clos

ed A

nnea

led


50

Metallurgy equivalent Grades

y.S (n/mm2) UTS (n/mm2) % elongation (Gl 50 mm)

n value r bar

min. max. min. max. min. min. min.

Low Carbon Steel SPCC 150 240 270 350 34 - -

SPCD 150 240 270 350 36 - -

SPCE 150 220 270 340 38 - -

SPCF 140 210 270 330 40 0.2 1.6

Ultra Low Carbon(IF) Steel SPCG 110 190 270 340 42 0.2 1.8

High Strength IF 350 HIF350 180 260 350 420 38 0.19 1.4

High Strength Micro-alloyed steel

HC260LA 260 330 350 430 26 - -

HC300LA 300 390 410 470 28 - -

HC340LA 340 420 410 510 21 - -

Mechanical Properties


51

Product Range

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

2.2

2.4

2.6

2.8

3.0 (3.0*900) (3.0*1500)

(1.5*1650)

(0.50*1650)

(0.35*1450)(0.35*900)

600 800 1000 1200 1400 1600 1800

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

2.2

2.4

2.6

2.8

3.0 (3.0*900) (3.0*1500)

(1.5*1650)

(0.6*1650)(0.6*900)

600 800 1000 1200 1400 1600 1800

Thic

knes

s (m

m)

Thic

knes

s (m

m)

Width (mm)

Width (mm)

Grade : DQ

Grade : EDD

Cold

Rol

led

Clos

ed A

nnea

led


52

0.2

0.2

0.4

0.4

0.6

0.6

0.8

0.8

1.0

1.0

1.2

1.2

1.4

1.4

1.6

1.6

1.8

1.8

2.0

2.0

2.2

2.2

2.4

2.4

2.6

2.6

2.8

2.8

3.0

3.0

(3.0*900) (3.0*1500)

(1.5*1650)

(0.6*1650)

(0.5*1400)(0.5*900)

(0.8*1400)

(0.3*1400)

(0.8*900)

(0.3*900)

(0.6*900)

Note: HS02/03/06 shall be avialable between 08 to 3.0 mm

600

600

800

800

1000

1000

1200

1200

1400

1400

1600

1600

1800

1800

Thic

knes

s (m

m)

Thic

knes

s (m

m)

Width (mm)

Width (mm)

Grade : IF

Grade : C-Mn Strengthened Steel


53

Product Range

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

2.2

2.4

2.6

2.8

3.0

(0.8*1400)(0.8*900)

(1.2*1400)

(0.3*1400)

(1.2*900)

(0.3*900)

Note: Material can also be provided for widths less than 900mm

600 800 1000 1200 1400 1600 1800

Thic

knes

s (m

m)

Width (mm)

Grade : HSLA (Micro Alloyed Steel)

Cold

Rol

led

Clos

ed A

nnea

led


54

Shape & Dimensional TolerancesThickneSS ToleRAnceS (Re ≤ 260 n/mm2)

nominal Thickness (mm ) nominal Width (mm)≤ 1200 > 1200, ≤ 1500 > 1500

0.30 – 0.40 ±0.015 ± 0.020 ± 0.0250.41 – 0.60 ±0.020 ± 0.025 ± 0.0300.61 – 0.80 ±0.025 ± 0.030 ± 0.0350.81 – 1.00 ±0.030 ± 0.035 ± 0.0401.01 – 1.25 ±0.035 ± 0.040 ± 0.0451.26 – 1.60 ±0.040 ± 0.045 ±0.0501.61 – 2.00 ±0.050 ± 0.055 ±0.0602.01 – 2.50 ±0.060 ± 0.065 ±0.0702.51 – 3.00 ±0.070 ± 0.075 ±0.080

ThickneSS ToleRAnceS (260 n/mm2 ≤ Re < 340 n/mm2)nominal Thickness (mm) nominal Width (mm)

≤ 1200 > 1200, ≤ 1500 > 1500 0.30 – 0.40 ± 0.020 ± 0.025 ± 0.0300.41 – 0.60 ± 0.025 ± 0.030 ± 0.0350.61 – 0.80 ± 0.030 ± 0.035 ± 0.0400.81 – 1.00 ± 0.035 ± 0.040 ± 0.0451.01 – 1.25 ± 0.040 ± 0.045 ± 0.0501.26 – 1.60 ± 0.045 ± 0.050 ± 0.0551.61 – 2.00 ± 0.055 ± 0.060 ± 0.0652.01 – 2.50 ± 0.065 ± 0.070 ± 0.0752.51 – 3.00 ± 0.075 ± 0.080 ± 0.085

ThickneSS ToleRAnceS (340 n/mm2 ≤ Re ≤ 420 n/mm2)nominal Thickness (mm) nominal Width (mm)

≤ 1200 > 1200, ≤ 1500 > 1500 0.30 – 0.40 ± 0.025 ± 0.030 ± 0.0350.41 – 0.60 ± 0.030 ± 0.035 ± 0.0400.61 – 0.80 ± 0.035 ± 0.040 ± 0.0450.81 – 1.00 ± 0.040 ± 0.045 ± 0.0501.01 – 1.25 ± 0.045 ± 0.050 ± 0.0551.26 – 1.60 ± 0.050 ± 0.055 ± 0.0601.61 – 2.00 ± 0.060 ± 0.065 ± 0.0702.01 – 2.50 ± 0.070 ± 0.075 ± 0.0802.51 – 3.00 ± 0.080 ± 0.085 ± 0.090

ThickneSS ToleRAnceS (Re > 420 n/mm2)nominal Thickness (mm) nominal Width (mm)

≤ 1200 > 1200, ≤ 1500 > 1500 0.30 – 0.40 ± 0.030 ± 0.035 ± 0.0400.41 – 0.60 ± 0.035 ± 0.040 ± 0.0450.61 – 0.80 ± 0.040 ± 0.045 ± 0.0500.81 – 1.00 ± 0.045 ± 0.050 ± 0.0551.01 – 1.25 ± 0.050 ± 0.055 ± 0.0651.26 – 1.60 ± 0.055 ± 0.065 ± 0.0701.61 – 2.00 ± 0.065 ± 0.070 ± 0.0752.01 – 2.50 ± 0.075 ± 0.080 ± 0.0852.51 – 3.00 ± 0.085 ± 0.090 ± 0.095note : Special Torelances will be applied, as agreed between the purchaser and the supplier. For achieving this, extra 20mm material will be trimmed from each sides and 25 m will be cut from both ends. For the steel sheet and the regular portion of the steel coil, measurement on thickness shall be made at any point not less than 20mm

apart from both side edges.


55

WiDTh ToleRAnceS Width of coil (mm) Tolerances (mm)

As rolled Trimmed Edge

Normal Tolerance Special Tolerance

(+) (-) (+) (-) (+) (-)

800 - 1200 12 0 3 0 1 0

1200 - 1500 12 0 4 0 1 0

> 1500 15 0 5 0 2 0

FlATneSS ToleRAnce (yielD STRenGTh < 260 n/mm2)Tolerance class nominal Width (mm) nominal Thickness(t) (mm)

0.7 > t 0.7 ≤ t < 1.2 t ≥ 1.2

Normal 800 - 1200 5 4 4

1200 - 1500 6 5 4

1500 - 1650 8 7 6

Special (FS) 800 - 1200 2 2 2

1200 - 1500 2 2 2

1500 - 1650 2 2 2

FlATneSS ToleRAnce (yielD STRenGTh ≥ 260 n/mm2)

Tolerance class nominal Width (mm) nominal Thickness(t) (mm)

0.7 > t 0.7 ≤ t < 1.2 t ≥ 1.2

Normal 800 - 1200 4 3 2

1200 - 1500 6 4 4

1500 - 1650 8 7 6

Special (FS) 800 - 1200 4 3 4

1200 - 1500 6 4 4

1500 - 1650 8 6 6

SURFAce FiniSh AnD RoUGhneSS VAlUeS

Surface Finish Roughness

Bright Ra ≤ 0.60 µm

Normal 0.60 µm < Ra ≤ 1.90 µm* Special Values can also be provided as per customer requirement.

cRcA SheeTSTolerances

Length Tolerance ±0.25 mm up to 2000, ±0.10 mm for each additional 1000 mm.

Diagonal difference 1.0 mm.

Flatness 5,I.

Cold

Rol

led

Clos

ed A

nnea

led


56

Service Centrecut-To-length Facility cR cTl-1 cR cTl-2 cR cTl-3 Annual prod. (tons) 100000 60000 25000

Thickness (mm) 0.35~3.00 0.35~3.00 0.35~3.00


Length (mm) 500~4500 400~4500 250~2500

Tolerance max. (mm) ±0.25 up to 2000 mm; ±0.10 for eachadditional 1000 mm

Packet wt, (tons) max. 5 5 2.5

Slitting Facility cR Slitter 1 cR Slitter 2 Annual production (tons) 140000 110000

Line speed (mpm) 300 300

Thickness (mm) 0.35~3.00 0.35~3.00

input Material Specifications

Inner Dia. of coil (mm) 508/610 508/610

Outer Dia. of coil (mm) 800~1900 800~1900

Wt. of coils, max. (tons) 30 25

Width of coil (mm) 400~1700 400~1300


Inner Dia. of coils (mm) 508/610 508/610

Outer Dia. of coils (mm) 800~1900 800~1900

Wt. of coils, max. (tons) 30 25

Width tolerance (mm) + 0.3/- 0 + 0.3/- 0

Minimum slit width (mm) 75 75

PackingCo

ld R

olle

d Cl

osed

Ann

eale

d


80

Packing

Galvanised

Galvanised

59

Galvanised Plain Sheet/Coils - Product Rangeand Specifications

coil Plain Sheet

1 Thickness

Soft 0.25 - 2.50mm 0.25 - 2.50mm

Hard 0.10 - 1.00mm 0.10 - 1.00mm

2 Thickness Tolerance

0.10 - 0.25 mm ± 15 µ (Spread of 30µ) ± 15 µ (Spread of 30µ)

0.251 - 0.50 mm ± 20 µ (Spread of 40µ) ± 20 µ (Spread of 40µ)

0.501-1.0 mm ± 30 µ (Spread of 60µ) ± 30 µ (Spread of 60µ)

>1.0 mm ± 2.5% of thickness or 100µ whichever is higher ± 2.5% of thickness or 100µ whichever is higher

3 Width

Mill Edge 760-1335 mm 760-1335 mm

Tolerance +5/-0 mm +5/-0 mm

Slit Edge 50-1250 mm

Tolerance ± 0.50 mm (spread of 1.0 mm)

4 Length

Range NA 4877 mm max.

5 Tolerance

Standard sheets +10/-0 mm(spread of 10 mm)

Blanks ± 1 mm(spread of 2 mm)

6 Coating 90-300 gsm 90-300 gsm

7 Edge Condition

Trimmed/mill Edge Trimmed/mill Edge

8 Shape

Coil form 3 mm/3 waves per meter 3 mm/3 waves per meter

Sheet form 3 mm/3 waves per meter 3 mm/3 waves per meter

9 Temper Soft /Hard Soft /Hard

Stretch Levelling 0.25 - 2.5 mm 0.25 - 2.5 mm

Skin Passed 0.30 - 2.5 mm 0.30 - 2.5 mm

10 Surface Roughness 0.6 - 2.0 µ 0.6 - 2.0 µ

Surface Finish Bright / Matte Bright / Matte

Spangle Type Big/ Regular / Small Spangles Big/ Regular / Small Spangles

Gal

vani

sed


60

coil Plain Sheet

11 Surface Treatment Chromated / Unchromated / Oiled/ Unoiled/ AFP Chromated / Unchromated / Oiled/ Unoiled/ AFP

12 Oiling 100 - 1000 mg/m2 100 - 1000 mg/m2

13 Monogram Online Logo can be given Online Logo can be given

J 16 & below

J 18 & below

14 Liner Marking As per Customer’s requirement As per Customer’s requirement

15 Coil ID 508/610 mm

16 Coil Winding

Soft Controlled Staggered ±5 mm

Straight wound ≥ 0.40 mm

Hard Controlled Staggered ±5 mm

17 Coil Weight

Thickness

<0.25 mm 2.0 - 6.0 t

0.251 - 0.50 mm 2.0 - 10.0 t

0.501-2.50 mm 2.0 - 22.0 t

18 Packet Weight 2.00 - 4.50 t

19 Standards IS 277; JIS G 3302; AS1397; EN 10326; EN 10327; ASTM A 653

IS 277; JIS G 3302; AS1397; EN 10326; EN 10327; ASTM A 653

20 Grades Full Hard / Commercial/ Forming / Structural Full Hard / Commercial/ Forming / Structural

21 Lock Forming Quality Guaranteed for ≤1.50 mm thickness Guaranteed for ≤1.50 mm thickness

22 Non Fluting Quality 2” mandrel thickness > 0.35 mm 2” mandrel thickness > 0.35 mm

3” mandrel thickness 0.301 - 0.35 mm 3” mandrel thickness 0.301 - 0.35 mm

5” mandrel thickness ≤ 0.30 mm 5” mandrel thickness ≤ 0.30 mm

23 Hardness

Full Hard 90 ± 5 HRB 90 ± 5 HRB

Soft 60 ± 5 HRB 60 ± 5 HRB

24 Identification and Marking

Metal Marker / Barcode Sticker Identification Sticker / Barcode Sticker

Galvanised

Specification Grade chemical composition (Values are in %) chemical composition (Values are in %) Mechanical Properties

C Mn Si P S Al Cu Ni Cr Mo V Cb Ti N B Yield Strength (Mpa min.)

Tensile Strength (Mpa min.)

% Elongation Gauge Length (mm)

Direction(L / T ^)

ASTM 653/A Low Carbon

CS Type A 0.10 0.60 - 0.030 0.035 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 170/380 - >20 50 GL L

CS Type B 0.02 to 0.15 0.60 - 0.030 0.035 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 205/380 - >=20 50 GL L

CS Type C 0.08 0.60 - 0.100 0.035 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 170/410 - >=15 50 GL L

FS Type A 0.10 0.50 - 0.020 0.035 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 170/310 - >=26 50 GL L

FS Type B 0.02 to 0.10 0.50 - 0.020 0.030 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 170/310 - >=26 50 GL L

DDS 0.06 0.50 - 0.020 0.025 0.010 min. 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 140/240 - >=32 50 GL L

EDDS 0.02 0.40 - 0.020 0.020 0.010 min. 0.200 0.200 0.150 0.060 0.100 0.100 0.150 - - 105/170 - >=40 50 GL L

JIS G 3302 SGCC 0.12 0.60 - 0.040 0.040 - - - - - - - - - - - - - - -

SGCH 0.15 0.60 - 0.050 0.050 - - - - - - - - - - - - - - -

SGCD1 0.12 0.50 - 0.040 0.040 - - - - - - - - - - - 270 36(#) 80 GL L

SGCD2 0.10 0.45 - 0.030 0.030 - - - - - - - - - - - 270 38 80 GL L

SGCD3 0.08 0.45 - 0.030 0.030 - - - - - - - - - - - 270 40 80 GL L

IS 277 : 2003 / IS 513 : 2008 (GI)

O 0.15 0.60 - 0.050 0.035 - - - - - - - - - - 280 410 28 50 T

D 0.12 0.50 - 0.400 0.035 - - - - - - - - - - 240 370 31 50 T

DD 0.10 0.45 - 0.025 0.300 - - - - - - - - - - 220 350 35 50 T

EDD (Al Killed) 0.08 0.40 - 0.020 0.030 - - - - - - - - - - 210 350 37 50 T

EDD (IF) 0.06 0.25 - 0.020 0.020 - - - - - - - 0.150 - - 190 350 40 50 T

EN 10327 DX51D 0.12 0.60 0.50 0.100 0.045 - - - - - - - 0.300 - - - 270- 500 22 80 GL T

DX52D 140-300 270-420 26 80 GL T

DX53D 140-260 270-380 30 80 GL T

DX54D 120-220 260-350 36 80 GL T

AS 1397 G1 0.12 0.50 - 0.040 0.035 - - - - - - - - - - - - - - -

G2 0.10 0.45 - 0.030 0.030 - - - - - - - - - - - - 30 27 T

G3 0.08 0.40 - 0.020 0.025 - - - - - - - - - - - - 35 32 T

Note:^ L - Lateral ; T - Transverse# In JIS - Elongation taken for thickness range 0.6 to 1.00 mm

61

Galvanised - Soft (Commercial, Forming, Drawing)

Gal

vani

sed


62


C Mn Si P S Al Cu Ni Cr Mo V Cb Ti N B Yield Strength (Mpa min.)

Tensile Strength (Mpa min.)


Direction(L / T ^)

ASTM 653/A Low Carbon

CS Type A 0.10 0.60 - 0.030 0.035 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 170/380 - >20 50 GL L

CS Type B 0.02 to 0.15 0.60 - 0.030 0.035 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 205/380 - >=20 50 GL L

CS Type C 0.08 0.60 - 0.100 0.035 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 170/410 - >=15 50 GL L

FS Type A 0.10 0.50 - 0.020 0.035 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 170/310 - >=26 50 GL L

FS Type B 0.02 to 0.10 0.50 - 0.020 0.030 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 170/310 - >=26 50 GL L

DDS 0.06 0.50 - 0.020 0.025 0.010 min. 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 140/240 - >=32 50 GL L

EDDS 0.02 0.40 - 0.020 0.020 0.010 min. 0.200 0.200 0.150 0.060 0.100 0.100 0.150 - - 105/170 - >=40 50 GL L

JIS G 3302 SGCC 0.12 0.60 - 0.040 0.040 - - - - - - - - - - - - - - -

SGCH 0.15 0.60 - 0.050 0.050 - - - - - - - - - - - - - - -

SGCD1 0.12 0.50 - 0.040 0.040 - - - - - - - - - - - 270 36(#) 80 GL L

SGCD2 0.10 0.45 - 0.030 0.030 - - - - - - - - - - - 270 38 80 GL L

SGCD3 0.08 0.45 - 0.030 0.030 - - - - - - - - - - - 270 40 80 GL L

IS 277 : 2003 / IS 513 : 2008 (GI)

O 0.15 0.60 - 0.050 0.035 - - - - - - - - - - 280 410 28 50 T

D 0.12 0.50 - 0.400 0.035 - - - - - - - - - - 240 370 31 50 T

DD 0.10 0.45 - 0.025 0.300 - - - - - - - - - - 220 350 35 50 T

EDD (Al Killed) 0.08 0.40 - 0.020 0.030 - - - - - - - - - - 210 350 37 50 T

EDD (IF) 0.06 0.25 - 0.020 0.020 - - - - - - - 0.150 - - 190 350 40 50 T

EN 10327 DX51D 0.12 0.60 0.50 0.100 0.045 - - - - - - - 0.300 - - - 270- 500 22 80 GL T

DX52D 140-300 270-420 26 80 GL T

DX53D 140-260 270-380 30 80 GL T

DX54D 120-220 260-350 36 80 GL T

AS 1397 G1 0.12 0.50 - 0.040 0.035 - - - - - - - - - - - - - - -

G2 0.10 0.45 - 0.030 0.030 - - - - - - - - - - - - 30 27 T

G3 0.08 0.40 - 0.020 0.025 - - - - - - - - - - - - 35 32 T

Note:^ L - Lateral ; T - Transverse# In JIS - Elongation taken for thickness range 0.6 to 1.00 mm

Galvanised

Specification Grade chemical composition (Values are in %) chemical composition (Values are in %) Mechanical PropertiesC Mn Si P S Al Cu Ni Cr Mo V Cb Ti N B Yield Strength

(Mpa min.)Tensile

Strength(Mpa min.)


Direction(L / T ^)

ASTM 653/A Structural

GradeSS 33 [230] 0.20 - - 0.040 0.040 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 230 310 20 50 GL LGradeSS 37 [255] 0.20 - - 0.100 0.040 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 255 360 18 50 GL LGradeSS 40 [275] 0.25 - - 0.100 0.040 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 275 380 16 50 GL LGrade 50 [340] class 1

0.25 - - 0.200 0.040 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 340 450 12 50 GL L

Grade 50 [340] class 2

0.25 - - 0.200 0.040 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 340 - 12 50 GL L


0.25 - - 0.040 0.040 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 340 480 12 50 GL L

Grade 80 [550] 0.20 - - 0.040 0.040 - 0.200 0.200 0.150 0.060 0.008 0.015 0.025 - - 550 570 - 50 GL LASTM 653/A Structural - HSLAS Type A

40 [275] 0.20 1.20 - - 0.035 - - 0.200 0.150 0.160 0.01 min. 0.005 min. 0.01 min. - - 275 340 22 50 GL L50 [340] 0.20 1.20 - - 0.035 - 0.200 0.200 0.150 0.160 0.01 min. 0.005 min. 0.01 min. - - 340 410 20 50 GL L60 [410] 0.20 1.35 - - 0.035 - 0.200 0.200 0.150 0.160 0.01 min. 0.005 min. 0.01 min. - - 410 480 16 50 GL L70 [480] 0.20 1.65 - - 0.035 - 0.200 0.200 0.150 0.160 0.01 min. 0.005 min. 0.01 min. - - 480 550 12 50 GL L80 [550] 0.20 1.65 - - 0.035 - 0.200 0.200 0.150 0.160 0.01 min. 0.005 min. 0.01 min. - - 550 620 10 50 GL L

ASTM 653/A Structural - HSLAS Type B


JIS G 3302 SGC 340 0.25 max.

1.70 max.

- 0.10 max.

0.035 max.

- - - - - - - - - - 245 340 20 80 GL L

SGC 400 0.25 max.

1.70 max.

- 0.10 max.

0.035 max.

- - - - - - - - - - 295 400 18 80 GL L

SGC 440 0.25 max.

1.70 max.

- 0.20 max.

0.035 max.

- - - - - - - - - - 335 440 18 80 GL L

SGC 490 0.25 max.

1.70 max.

- 0.20 max.

0.035 max.

- - - - - - - - - - 365 490 16 80 GL L

SGC 570 0.25 max.

1.70 max.

- 0.20 max.

0.035 max.

- - - - - - - - - - 560 570 - 80 GL L

EN 10326 S220 GD 0.20 1.70 0.60 0.100 0.045 - - - - - - - - - - 220 300 20 80 GL LS250 GD 250 330 19 80 GL LS280 GD 280 360 18 80 GL LS320 GD 320 390 17 80 GL LS350 GD 350 420 16 80 GL LS550 GD 550 560 - 80 GL L

AS 1397 G 250 0.12 0.50 - 0.040 0.035 - - - - - - - - - - 250 320 25 22 LG 300 0.30 1.60 - 0.100 0.035 - - - - - - - - - - 300 340 20 18 LG 350 0.30 1.60 - 0.100 0.035 - - - - - - - - - - 350 420 15 14 LG 450 0.20 1.20 - 0.040 0.030 - - - - - - - - - - 450 480 10 9 LG 500 0.20 1.20 - 0.040 0.030 - - - - - - - - - - 500 520 8 7 LG 550 0.20 1.20 - 0.040 0.030 - - - - - - - - - - 550 550 2 2 L

Note:^ L - Lateral ; T - TransverseDIN 17162 ES C.D7.001;

63

Galvanised - Structural

Gal

vani

sed


64

Specification Grade chemical composition (Values are in %) chemical composition (Values are in %) Mechanical PropertiesC Mn Si P S Al Cu Ni Cr Mo V Cb Ti N B Yield Strength

(Mpa min.)Tensile

Strength(Mpa min.)


Direction(L / T ^)

ASTM 653/A Structural

GradeSS 33 [230] 0.20 - - 0.040 0.040 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 230 310 20 50 GL LGradeSS 37 [255] 0.20 - - 0.100 0.040 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 255 360 18 50 GL LGradeSS 40 [275] 0.25 - - 0.100 0.040 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 275 380 16 50 GL LGrade 50 [340] class 1

0.25 - - 0.200 0.040 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 340 450 12 50 GL L


0.25 - - 0.200 0.040 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 340 - 12 50 GL L


0.25 - - 0.040 0.040 - 0.200 0.200 0.150 0.060 0.008 0.008 0.025 - - 340 480 12 50 GL L

Grade 80 [550] 0.20 - - 0.040 0.040 - 0.200 0.200 0.150 0.060 0.008 0.015 0.025 - - 550 570 - 50 GL LASTM 653/A Structural - HSLAS Type A


ASTM 653/A Structural - HSLAS Type B


JIS G 3302 SGC 340 0.25 max.

1.70 max.

- 0.10 max.

0.035 max.

- - - - - - - - - - 245 340 20 80 GL L

SGC 400 0.25 max.

1.70 max.

- 0.10 max.

0.035 max.

- - - - - - - - - - 295 400 18 80 GL L

SGC 440 0.25 max.

1.70 max.

- 0.20 max.

0.035 max.

- - - - - - - - - - 335 440 18 80 GL L

SGC 490 0.25 max.

1.70 max.

- 0.20 max.

0.035 max.

- - - - - - - - - - 365 490 16 80 GL L

SGC 570 0.25 max.

1.70 max.

- 0.20 max.

0.035 max.

- - - - - - - - - - 560 570 - 80 GL L

EN 10326 S220 GD 0.20 1.70 0.60 0.100 0.045 - - - - - - - - - - 220 300 20 80 GL LS250 GD 250 330 19 80 GL LS280 GD 280 360 18 80 GL LS320 GD 320 390 17 80 GL LS350 GD 350 420 16 80 GL LS550 GD 550 560 - 80 GL L

AS 1397 G 250 0.12 0.50 - 0.040 0.035 - - - - - - - - - - 250 320 25 22 LG 300 0.30 1.60 - 0.100 0.035 - - - - - - - - - - 300 340 20 18 LG 350 0.30 1.60 - 0.100 0.035 - - - - - - - - - - 350 420 15 14 LG 450 0.20 1.20 - 0.040 0.030 - - - - - - - - - - 450 480 10 9 LG 500 0.20 1.20 - 0.040 0.030 - - - - - - - - - - 500 520 8 7 LG 550 0.20 1.20 - 0.040 0.030 - - - - - - - - - - 550 550 2 2 L

Note:^ L - Lateral ; T - TransverseDIN 17162 ES C.D7.001;

Galvanised

65

Galvanised Plain - Bundle Weight Chart Product

codeWeight in kg of 21.946 (mtrs) for different widths Weight in kg of 21.946 (mtrs) for different widths

900 (mm) 1000 (mm) 1150 (mm) 1220 (mm) 1250 (mm) 1335 (mm)min . max. min. max. min. max. min. max. min. max. min. max.

J12 17.30 18.42 19.22 20.47 22.11 23.54 23.45 24.97 24.03 25.58 25.57 27.22J13 18.43 19.95 20.48 22.17 23.55 25.49 24.98 27.04 25.60 27.71 27.24 29.48J14 19.96 21.48 22.18 23.87 25.50 27.45 27.06 29.12 27.72 29.83 29.50 31.74J16 21.49 24.55 23.88 27.28 27.46 31.37 29.13 33.28 29.85 34.10 31.76 36.28J18 24.56 27.62 27.29 30.69 31.38 35.29 33.29 37.44 34.11 38.36 36.29 40.82J20 27.63 30.69 30.70 34.10 35.31 39.22 37.45 41.60 38.38 42.63 40.83 45.35J22 30.70 33.76 34.11 37.51 39.23 43.14 41.62 45.76 42.64 46.89 45.37 49.89J25 33.77 38.76 37.52 43.07 43.15 49.53 45.78 52.54 46.90 53.83 49.90 57.28J28 38.77 42.97 43.08 47.74 49.54 54.91 52.55 58.25 53.85 59.68 57.29 63.50J30 42.98 46.51 47.76 51.68 54.92 59.43 58.26 63.05 59.69 64.60 63.51 68.73J32 46.52 49.11 51.69 54.57 59.44 62.75 63.06 66.57 64.61 68.21 68.75 72.57J35 49.12 54.27 54.58 60.30 62.76 69.35 66.58 73.57 68.22 75.38 72.59 80.20J37 54.28 56.78 60.31 63.09 69.36 72.55 73.58 76.97 75.39 78.86 80.21 83.91J40 56.79 62.02 63.10 68.91 72.57 79.25 76.98 84.07 78.88 86.14 83.92 91.65J42 62.03 64.45 68.92 71.61 79.26 82.35 84.09 87.37 86.15 89.51 91.67 95.24J45 64.46 69.77 71.62 77.52 82.37 89.15 87.38 94.58 89.53 96.90 95.26 103.10J47 69.78 72.13 77.53 80.14 89.16 92.17 94.59 97.78 96.92 100.18 103.12 106.59J50 72.14 77.52 80.16 86.13 92.18 99.05 97.79 105.08 100.19 107.67 106.61 114.56J52 77.53 79.80 86.14 88.67 99.07 101.97 105.10 108.17 107.68 110.83 114.57 117.93J55 79.81 85.28 88.68 94.76 101.98 108.97 108.19 115.60 110.85 118.44 117.94 126.02J57 85.29 87.47 94.77 97.19 108.98 111.77 115.62 118.57 118.46 121.49 126.04 129.26J60 87.48 93.03 97.20 103.37 111.78 118.87 118.58 126.11 121.50 129.21 129.28 137.48J63 93.04 97.68 103.38 108.53 118.88 124.81 126.12 132.41 129.22 135.67 137.49 144.35J65 97.69 99.75 108.54 110.83 124.83 127.46 132.42 135.22 135.68 138.54 144.36 147.41J70 99.76 108.53 110.84 120.59 127.47 138.68 135.23 147.12 138.56 150.74 147.42 160.38J75 108.54 115.09 120.60 127.88 138.69 147.06 147.13 156.01 150.75 159.85 160.40 170.08J80 115.10 124.04 127.89 137.82 147.07 158.50 156.02 168.14 159.86 172.28 170.09 183.30J85 124.05 130.44 137.83 144.93 158.51 166.67 168.16 176.82 172.29 181.17 183.32 192.76J90 130.45 138.11 144.94 153.46 166.69 176.47 176.83 187.22 181.18 191.82 192.78 204.10J95 138.12 145.50 153.47 161.67 176.49 185.92 187.23 197.23 191.83 202.08 204.11 215.02J100 145.51 155.00 161.68 172.22 185.93 198.06 197.25 210.11 202.10 215.28 215.03 229.06J105 155.01 160.55 172.23 178.39 198.07 205.15 210.12 217.63 215.29 222.99 229.07 237.26J110 160.56 166.85 178.40 185.39 205.16 213.20 217.65 226.17 223.00 231.74 237.27 246.57J115 166.86 176.60 185.40 196.22 213.21 225.66 226.19 239.39 231.75 245.28 246.58 260.98J120 176.61 184.15 196.23 204.61 225.67 235.30 239.40 249.63 245.29 255.76 260.99 272.13J125 184.16 200.50 204.62 222.78 235.32 256.19 249.64 271.79 255.78 278.47 272.15 296.29

wt.(kg) X 21.946 B.Wt. = -------------------------------- Pcs. x Length

Gal

vani

sed


66

Productcode

Weight in kg of 21.946 (mtrs) for different widths Weight in kg of 21.946 (mtrs) for different widths900 (mm) 1000 (mm) 1150 (mm) 1220 (mm) 1250 (mm) 1335 (mm)

min . max. min. max. min. max. min. max. min. max. min. max.J12 17.30 18.42 19.22 20.47 22.11 23.54 23.45 24.97 24.03 25.58 25.57 27.22J13 18.43 19.95 20.48 22.17 23.55 25.49 24.98 27.04 25.60 27.71 27.24 29.48J14 19.96 21.48 22.18 23.87 25.50 27.45 27.06 29.12 27.72 29.83 29.50 31.74J16 21.49 24.55 23.88 27.28 27.46 31.37 29.13 33.28 29.85 34.10 31.76 36.28J18 24.56 27.62 27.29 30.69 31.38 35.29 33.29 37.44 34.11 38.36 36.29 40.82J20 27.63 30.69 30.70 34.10 35.31 39.22 37.45 41.60 38.38 42.63 40.83 45.35J22 30.70 33.76 34.11 37.51 39.23 43.14 41.62 45.76 42.64 46.89 45.37 49.89J25 33.77 38.76 37.52 43.07 43.15 49.53 45.78 52.54 46.90 53.83 49.90 57.28J28 38.77 42.97 43.08 47.74 49.54 54.91 52.55 58.25 53.85 59.68 57.29 63.50J30 42.98 46.51 47.76 51.68 54.92 59.43 58.26 63.05 59.69 64.60 63.51 68.73J32 46.52 49.11 51.69 54.57 59.44 62.75 63.06 66.57 64.61 68.21 68.75 72.57J35 49.12 54.27 54.58 60.30 62.76 69.35 66.58 73.57 68.22 75.38 72.59 80.20J37 54.28 56.78 60.31 63.09 69.36 72.55 73.58 76.97 75.39 78.86 80.21 83.91J40 56.79 62.02 63.10 68.91 72.57 79.25 76.98 84.07 78.88 86.14 83.92 91.65J42 62.03 64.45 68.92 71.61 79.26 82.35 84.09 87.37 86.15 89.51 91.67 95.24J45 64.46 69.77 71.62 77.52 82.37 89.15 87.38 94.58 89.53 96.90 95.26 103.10J47 69.78 72.13 77.53 80.14 89.16 92.17 94.59 97.78 96.92 100.18 103.12 106.59J50 72.14 77.52 80.16 86.13 92.18 99.05 97.79 105.08 100.19 107.67 106.61 114.56J52 77.53 79.80 86.14 88.67 99.07 101.97 105.10 108.17 107.68 110.83 114.57 117.93J55 79.81 85.28 88.68 94.76 101.98 108.97 108.19 115.60 110.85 118.44 117.94 126.02J57 85.29 87.47 94.77 97.19 108.98 111.77 115.62 118.57 118.46 121.49 126.04 129.26J60 87.48 93.03 97.20 103.37 111.78 118.87 118.58 126.11 121.50 129.21 129.28 137.48J63 93.04 97.68 103.38 108.53 118.88 124.81 126.12 132.41 129.22 135.67 137.49 144.35J65 97.69 99.75 108.54 110.83 124.83 127.46 132.42 135.22 135.68 138.54 144.36 147.41J70 99.76 108.53 110.84 120.59 127.47 138.68 135.23 147.12 138.56 150.74 147.42 160.38J75 108.54 115.09 120.60 127.88 138.69 147.06 147.13 156.01 150.75 159.85 160.40 170.08J80 115.10 124.04 127.89 137.82 147.07 158.50 156.02 168.14 159.86 172.28 170.09 183.30J85 124.05 130.44 137.83 144.93 158.51 166.67 168.16 176.82 172.29 181.17 183.32 192.76J90 130.45 138.11 144.94 153.46 166.69 176.47 176.83 187.22 181.18 191.82 192.78 204.10J95 138.12 145.50 153.47 161.67 176.49 185.92 187.23 197.23 191.83 202.08 204.11 215.02J100 145.51 155.00 161.68 172.22 185.93 198.06 197.25 210.11 202.10 215.28 215.03 229.06J105 155.01 160.55 172.23 178.39 198.07 205.15 210.12 217.63 215.29 222.99 229.07 237.26J110 160.56 166.85 178.40 185.39 205.16 213.20 217.65 226.17 223.00 231.74 237.27 246.57J115 166.86 176.60 185.40 196.22 213.21 225.66 226.19 239.39 231.75 245.28 246.58 260.98J120 176.61 184.15 196.23 204.61 225.67 235.30 239.40 249.63 245.29 255.76 260.99 272.13J125 184.16 200.50 204.62 222.78 235.32 256.19 249.64 271.79 255.78 278.47 272.15 296.29

wt.(kg) X 21.946 B.Wt. = -------------------------------- Pcs. x Length

Galvanised Corrugated

Gal

vani

sed


68

Galvanised Corrugated Sheets - Product Rangeand Specifications

Product Range

Thickness 0.090 - 0.800 mm

Width 665/720/740/760/780/800/840/875/900/1065/1220 mm

Length 1829 - 4877 mm(Max length of 4877 mm in 0.22 - 0.65 mm thickness)

Temper Hard / Soft

Non Stretch Levelled 0.090 - 0.650 mm (hard)

Stretch Levelled 0.40 - 0.80 mm (Soft)

Spangle Type Regular/Small/ Big spangles

Monogram Online Logo can be given

Packet Weight 2.0 - 4.5t

Corrugation As per Standard or Customer requirement

Specification IS277 / JIS G 3316 / ES C.D7.026 or equivalent

Grade Full Hard / Soft

hardness

Soft 60±5 HRB

Hard 90 ± 5 HRB

Identification & Marking Identification Sticker / Barcode Sticker

Galvanised

Product code bundle Weight (kg) bundle Weight (kg) bundle Weight (kg)GP Thickness CR Thickness (mm) 900 (mm) 1220 (mm) 1335 (mm)

min. max. min. aim max. min. max. min. max. min. max.J09 0.087 0.094 0.074 0.078 0.081 13.50 14.50 * * * *J10 0.094 0.099 0.081 0.084 0.087 14.51 15.36 * * * *J11 0.099 0.109 0.087 0.091 0.096 15.37 16.89 * * * *J12 0.109 0.119 0.096 0.101 0.106 16.90 18.42 * * * *J13 0.119 0.129 0.106 0.111 0.116 18.43 19.95 * * * *J14 0.129 0.139 0.116 0.121 0.126 19.96 21.48 * * * *J16 0.139 0.158 0.126 0.136 0.146 21.49 24.55 * * * *J18 0.158 0.178 0.146 0.156 0.166 24.56 27.62 * * * *J20 0.178 0.198 0.166 0.176 0.185 27.63 30.69 * * * *J22 0.198 0.218 0.185 0.195 0.205 30.70 33.76 * * * *J25 0.218 0.250 0.205 0.221 0.237 33.77 38.76 * * * *J28 0.250 0.277 0.237 0.251 0.265 38.77 42.97 * * * *J30 0.277 0.300 0.265 0.276 0.287 42.98 46.51 * * * *J32 0.300 0.317 0.287 0.296 0.304 46.52 49.11 * * * *J35 0.317 0.350 0.304 0.321 0.337 49.12 54.27 66.58 73.57 72.86 80.50J37 0.350 0.366 0.338 0.346 0.354 54.28 56.78 73.58 76.97 80.52 84.22J40 0.366 0.400 0.354 0.371 0.387 56.79 62.02 76.98 84.07 84.24 92.00J42 0.400 0.416 0.388 0.395 0.403 62.03 64.45 84.09 87.37 92.01 95.60J45 0.416 0.450 0.403 0.420 0.437 64.46 69.77 87.38 94.58 95.62 103.49J47 0.450 0.465 0.437 0.445 0.453 69.78 72.13 94.59 97.78 103.51 106.99J50 0.465 0.500 0.453 0.470 0.487 72.14 77.52 97.79 105.08 107.01 114.99J52 0.500 0.515 0.487 0.495 0.502 77.53 79.80 105.10 108.17 115.00 118.37J55 0.515 0.550 0.502 0.520 0.537 79.81 85.28 108.19 115.60 118.38 126.50J57 0.550 0.564 0.538 0.545 0.552 85.29 87.47 115.62 118.57 126.51 129.75J60 0.564 0.600 0.552 0.570 0.587 87.48 93.03 118.58 126.11 129.76 137.99J63 0.600 0.630 0.588 0.602 0.617 93.04 97.68 126.12 132.41 138.01 144.89J65 0.630 0.643 0.618 0.624 0.631 97.69 99.75 132.42 135.22 144.91 147.96J70 0.643 0.700 0.631 0.659 0.687 99.76 108.53 135.23 147.12 147.98 160.99J75 0.700 0.742 0.687 0.709 0.730 108.54 115.09 147.13 156.01 161.00 170.72J80 0.742 0.800 0.730 0.759 0.787 115.10 124.04 156.02 168.14 170.73 183.99J85 0.800 0.841 0.788 0.808 0.829 124.05 130.44 168.16 176.82 184.01 193.49J90 0.841 0.891 0.829 0.853 0.878 130.45 138.11 176.83 187.22 193.50 204.86J95 0.891 0.938 0.878 0.902 0.926 138.12 145.50 187.23 197.23 204.88 215.83J100 0.938 1.000 0.926 0.957 0.987 145.51 155.00 197.25 210.11 215.84 229.92J105 1.000 1.035 0.987 1.005 1.023 155.01 160.55 210.12 217.63 229.93 238.15J110 1.036 1.132 1.023 1.071 1.119 160.56 175.50 217.65 237.90 238.16 260.33J120 1.132 1.188 1.119 1.147 1.175 175.51 184.15 237.91 249.63 260.34 273.16J125 1.188 1.293 1.175 1.228 1.281 184.16 200.50 249.64 271.79 273.17 297.41Note : * mark sizes are out of process capability of GC.# Earlier brand name Jindal Vishwas

69

Galvanised Corrugated (JSW Vishwas#)GC Sheet - Bundle Weight Chart

Gal

vani

sed


70

Product code bundle Weight (kg) bundle Weight (kg) bundle Weight (kg)GP Thickness CR Thickness (mm) 900 (mm) 1220 (mm) 1335 (mm)

min. max. min. aim max. min. max. min. max. min. max.J09 0.087 0.094 0.074 0.078 0.081 13.50 14.50 * * * *J10 0.094 0.099 0.081 0.084 0.087 14.51 15.36 * * * *J11 0.099 0.109 0.087 0.091 0.096 15.37 16.89 * * * *J12 0.109 0.119 0.096 0.101 0.106 16.90 18.42 * * * *J13 0.119 0.129 0.106 0.111 0.116 18.43 19.95 * * * *J14 0.129 0.139 0.116 0.121 0.126 19.96 21.48 * * * *J16 0.139 0.158 0.126 0.136 0.146 21.49 24.55 * * * *J18 0.158 0.178 0.146 0.156 0.166 24.56 27.62 * * * *J20 0.178 0.198 0.166 0.176 0.185 27.63 30.69 * * * *J22 0.198 0.218 0.185 0.195 0.205 30.70 33.76 * * * *J25 0.218 0.250 0.205 0.221 0.237 33.77 38.76 * * * *J28 0.250 0.277 0.237 0.251 0.265 38.77 42.97 * * * *J30 0.277 0.300 0.265 0.276 0.287 42.98 46.51 * * * *J32 0.300 0.317 0.287 0.296 0.304 46.52 49.11 * * * *J35 0.317 0.350 0.304 0.321 0.337 49.12 54.27 66.58 73.57 72.86 80.50J37 0.350 0.366 0.338 0.346 0.354 54.28 56.78 73.58 76.97 80.52 84.22J40 0.366 0.400 0.354 0.371 0.387 56.79 62.02 76.98 84.07 84.24 92.00J42 0.400 0.416 0.388 0.395 0.403 62.03 64.45 84.09 87.37 92.01 95.60J45 0.416 0.450 0.403 0.420 0.437 64.46 69.77 87.38 94.58 95.62 103.49J47 0.450 0.465 0.437 0.445 0.453 69.78 72.13 94.59 97.78 103.51 106.99J50 0.465 0.500 0.453 0.470 0.487 72.14 77.52 97.79 105.08 107.01 114.99J52 0.500 0.515 0.487 0.495 0.502 77.53 79.80 105.10 108.17 115.00 118.37J55 0.515 0.550 0.502 0.520 0.537 79.81 85.28 108.19 115.60 118.38 126.50J57 0.550 0.564 0.538 0.545 0.552 85.29 87.47 115.62 118.57 126.51 129.75J60 0.564 0.600 0.552 0.570 0.587 87.48 93.03 118.58 126.11 129.76 137.99J63 0.600 0.630 0.588 0.602 0.617 93.04 97.68 126.12 132.41 138.01 144.89J65 0.630 0.643 0.618 0.624 0.631 97.69 99.75 132.42 135.22 144.91 147.96J70 0.643 0.700 0.631 0.659 0.687 99.76 108.53 135.23 147.12 147.98 160.99J75 0.700 0.742 0.687 0.709 0.730 108.54 115.09 147.13 156.01 161.00 170.72J80 0.742 0.800 0.730 0.759 0.787 115.10 124.04 156.02 168.14 170.73 183.99J85 0.800 0.841 0.788 0.808 0.829 124.05 130.44 168.16 176.82 184.01 193.49J90 0.841 0.891 0.829 0.853 0.878 130.45 138.11 176.83 187.22 193.50 204.86J95 0.891 0.938 0.878 0.902 0.926 138.12 145.50 187.23 197.23 204.88 215.83J100 0.938 1.000 0.926 0.957 0.987 145.51 155.00 197.25 210.11 215.84 229.92J105 1.000 1.035 0.987 1.005 1.023 155.01 160.55 210.12 217.63 229.93 238.15J110 1.036 1.132 1.023 1.071 1.119 160.56 175.50 217.65 237.90 238.16 260.33J120 1.132 1.188 1.119 1.147 1.175 175.51 184.15 237.91 249.63 260.34 273.16J125 1.188 1.293 1.175 1.228 1.281 184.16 200.50 249.64 271.79 273.17 297.41Note : * mark sizes are out of process capability of GC.# Earlier brand name Jindal Vishwas

Galvanised

G.i. Thickness (mm)

Maximum bundle Weight (kgs)

Weight per piece (10 corrugations) (in kgs.) for different widths Weight per piece (10 corrugations) (in kgs.) for different widths

6 feet 7 feet 8 feet 9 feet 10 feet 12 feet 14 feet 16 feet

1829 (mm) 2134 (mm) 2438 (mm) 2743 (mm) 3048 (mm) 3658 (mm) 4267 (mm) 4877 (mm)

0.09 14.50 1.21 1.41 1.61 1.81 2.01 2.42 — —

0.10 15.36 1.28 1.49 1.71 1.92 2.13 2.56 — —

0.11 16.89 1.41 1.64 1.88 2.11 2.35 2.82 — —

0.12 18.42 1.54 1.79 2.05 2.30 2.56 3.07 — —

0.13 19.95 1.66 1.94 2.22 2.49 2.77 3.33 — —

0.14 21.48 1.79 2.09 2.39 2.69 2.98 3.58 — —

0.16 24.55 2.05 2.39 2.73 3.07 3.41 4.09 — —

0.18 27.62 2.30 2.69 3.07 3.45 3.84 4.60 — —

0.20 30.69 2.56 2.98 3.41 3.84 4.26 5.12 5.97 6.82

0.22 33.76 2.81 3.28 3.75 4.22 4.69 5.63 6.56 7.50

0.25 38.76 3.23 3.77 4.31 4.85 5.38 6.46 7.54 8.61

0.28 42.97 3.58 4.18 4.77 5.37 5.97 7.16 8.36 9.55

0.30 46.51 3.88 4.52 5.17 5.81 6.46 7.75 9.04 10.34

0.32 49.11 4.09 4.77 5.46 6.14 6.82 8.19 9.55 10.91

0.35 54.27 4.52 5.28 6.03 6.78 7.54 9.05 10.55 12.06

0.37 56.78 4.73 5.52 6.31 7.10 7.89 9.46 11.04 12.62

0.40 62.02 5.17 6.03 6.89 7.75 8.61 10.34 12.06 13.78

0.42 64.45 5.37 6.27 7.16 8.06 8.95 10.74 12.53 14.32

0.45 69.77 5.81 6.78 7.75 8.72 9.69 11.63 13.57 15.50

0.47 72.13 6.01 7.01 8.01 9.02 10.02 12.02 14.03 16.03

0.50 77.52 6.46 7.54 8.61 9.69 10.77 12.92 15.07 17.23

0.52 79.80 6.65 7.76 8.87 9.98 11.08 13.30 15.52 17.73

0.55 85.28 7.11 8.29 9.48 10.66 11.84 14.21 16.58 18.95

0.57 87.47 7.29 8.50 9.72 10.93 12.15 14.58 17.01 19.44

0.60 93.03 7.75 9.04 10.34 11.63 12.92 15.51 18.09 20.67

0.63 97.68 8.14 9.50 10.85 12.21 13.57 16.28 18.99 21.71

0.65 99.75 8.31 9.70 11.08 12.47 13.85 16.63 19.40 22.17

0.70 108.53 9.04 10.55 12.06 13.57 15.07 18.09 21.10 24.12

0.75 115.09 9.59 11.19 12.79 14.39 15.98 19.18 22.38 25.58

0.80 124.04 10.34 12.06 13.78 15.51 17.23 20.67 24.12 27.57

71

Galvanised Corrugated (JSW Vishwas#)GC Sheet - Weight Per Piece Chart

# Earlier brand name Jindal Vishwas

Gal

vani

sed


72

G.i. Thickness (mm)

Maximum bundle Weight (kgs)

Weight per piece (10 corrugations) (in kgs.) for different widths Weight per piece (10 corrugations) (in kgs.) for different widths



0.09 14.50 1.21 1.41 1.61 1.81 2.01 2.42 — —

0.10 15.36 1.28 1.49 1.71 1.92 2.13 2.56 — —

0.11 16.89 1.41 1.64 1.88 2.11 2.35 2.82 — —

0.12 18.42 1.54 1.79 2.05 2.30 2.56 3.07 — —

0.13 19.95 1.66 1.94 2.22 2.49 2.77 3.33 — —

0.14 21.48 1.79 2.09 2.39 2.69 2.98 3.58 — —

0.16 24.55 2.05 2.39 2.73 3.07 3.41 4.09 — —

0.18 27.62 2.30 2.69 3.07 3.45 3.84 4.60 — —

0.20 30.69 2.56 2.98 3.41 3.84 4.26 5.12 5.97 6.82

0.22 33.76 2.81 3.28 3.75 4.22 4.69 5.63 6.56 7.50

0.25 38.76 3.23 3.77 4.31 4.85 5.38 6.46 7.54 8.61

0.28 42.97 3.58 4.18 4.77 5.37 5.97 7.16 8.36 9.55

0.30 46.51 3.88 4.52 5.17 5.81 6.46 7.75 9.04 10.34

0.32 49.11 4.09 4.77 5.46 6.14 6.82 8.19 9.55 10.91

0.35 54.27 4.52 5.28 6.03 6.78 7.54 9.05 10.55 12.06

0.37 56.78 4.73 5.52 6.31 7.10 7.89 9.46 11.04 12.62

0.40 62.02 5.17 6.03 6.89 7.75 8.61 10.34 12.06 13.78

0.42 64.45 5.37 6.27 7.16 8.06 8.95 10.74 12.53 14.32

0.45 69.77 5.81 6.78 7.75 8.72 9.69 11.63 13.57 15.50

0.47 72.13 6.01 7.01 8.01 9.02 10.02 12.02 14.03 16.03

0.50 77.52 6.46 7.54 8.61 9.69 10.77 12.92 15.07 17.23

0.52 79.80 6.65 7.76 8.87 9.98 11.08 13.30 15.52 17.73

0.55 85.28 7.11 8.29 9.48 10.66 11.84 14.21 16.58 18.95

0.57 87.47 7.29 8.50 9.72 10.93 12.15 14.58 17.01 19.44

0.60 93.03 7.75 9.04 10.34 11.63 12.92 15.51 18.09 20.67

0.63 97.68 8.14 9.50 10.85 12.21 13.57 16.28 18.99 21.71

0.65 99.75 8.31 9.70 11.08 12.47 13.85 16.63 19.40 22.17

0.70 108.53 9.04 10.55 12.06 13.57 15.07 18.09 21.10 24.12

0.75 115.09 9.59 11.19 12.79 14.39 15.98 19.18 22.38 25.58

0.80 124.04 10.34 12.06 13.78 15.51 17.23 20.67 24.12 27.57

Galvanised

G.i. Thickness (mm) Maximum bundle weight (kgs)

Weight per piece (15 corrugations) (in kgs) for different widths Weight per piece (15 corrugations) (in kgs) for different widths



0.40 91.99 7.67 8.94 10.22 11.50 12.78 15.33 17.89 20.44

0.45 103.49 8.62 10.06 11.50 12.94 14.37 17.25 20.12 23.00

0.50 114.99 9.58 11.18 12.78 14.37 15.97 19.17 22.36 25.55

0.55 126.49 10.54 12.30 14.05 15.81 17.57 21.08 24.60 28.11

0.60 137.99 11.50 13.42 15.33 17.25 19.17 23.00 26.83 30.66

0.63 144.89 12.07 14.09 16.10 18.11 20.12 24.15 28.17 32.20

0.65 149.49 12.46 14.53 16.61 18.69 20.76 24.91 29.07 33.22

0.70 160.99 13.42 15.65 17.89 20.12 22.36 26.83 31.30 35.78

0.75 172.49 14.37 16.77 19.17 21.56 23.96 28.75 33.54 38.33

0.80 183.99 15.33 17.89 20.44 23.00 25.55 30.66 35.78 40.8973

Galvanised Corrugated (JSW Vishwas#)GC Sheet - Weight Per Piece Chart

# Earlier brand name Jindal Vishwas

Gal

vani

sed


74

G.i. Thickness (mm) Maximum bundle weight (kgs)

Weight per piece (15 corrugations) (in kgs) for different widths Weight per piece (15 corrugations) (in kgs) for different widths



0.40 91.99 7.67 8.94 10.22 11.50 12.78 15.33 17.89 20.44

0.45 103.49 8.62 10.06 11.50 12.94 14.37 17.25 20.12 23.00

0.50 114.99 9.58 11.18 12.78 14.37 15.97 19.17 22.36 25.55

0.55 126.49 10.54 12.30 14.05 15.81 17.57 21.08 24.60 28.11

0.60 137.99 11.50 13.42 15.33 17.25 19.17 23.00 26.83 30.66

0.63 144.89 12.07 14.09 16.10 18.11 20.12 24.15 28.17 32.20

0.65 149.49 12.46 14.53 16.61 18.69 20.76 24.91 29.07 33.22

0.70 160.99 13.42 15.65 17.89 20.12 22.36 26.83 31.30 35.78

0.75 172.49 14.37 16.77 19.17 21.56 23.96 28.75 33.54 38.33

0.80 183.99 15.33 17.89 20.44 23.00 25.55 30.66 35.78 40.89

Galvanised

75

Packing

Description Wax Paper

(optional)

hDPe Paper

laminated Vci

cardboard iD & oD

GP Sheet cover

hR iD Ring

GP oD Ring

Wooden Pallet

Steel Strap &

Seal (3/4’’)

Steel Strap & Seal (7/4’’)

coils

Sea Worthy Yes Yes Yes Yes Yes Yes - - Yes

Metallic - Yes - Yes Yes Yes - Yes -

Non Metallic - Yes - - Yes Yes - Yes -

Sheet Packets

Sea Worthy - Yes - Yes - - Yes - Yes

Metallic - Yes - Yes - - Yes Yes -

Non Metallic - Yes - - - - Yes Yes -

Gal

vani

sed


76

Sea Worthy Coil Packing

Sea Worthy Sheet Packing

Galvalume

Galvalum

e

79

coating WeightAZM 70 to AZM 200 (150 gsm to 200 gsm)

Surface QualitySpangle Supressed / RegularSurface Treatment Chromated / Acrylic CoatingOiling Oiled / UnoiledSurface Roughness 0.60 to 2.0 µ (For Skin Passed)Stretch Levelling Yes (Optional)Edge Condition Trimmed / Mill EdgeSkin Pass Yes (Optional)

DimensionsThickness Range 0.30 - 1.20 mm (BMT) Soft

0.4 - 1.00 mm HardWidth Range 760 - 1335 mmLength for Sheets Upto 4877 mm

Thickness ToleranceThickness Range (mm) Total Tolerance (+/-) (μ m)0.30 - 0.40 500.40 - 0.59 600.60 - 0.79 700.80 - 1.2 80

length Tolerance+ 15 mm / - 0 or 0.5% of Total Length (whichever is higher)

Width ToleranceWidth Range (mm) JSW capability (mm) ASTM A 792 / A 792 M (mm) 300 -600 (slit edge) + 0.50/ - 0 (slit) + 3/ - 0600 - 1200 (slit/mill edge) (+ 0.5/ - 0) / (+ 5/ - 0) + 5/ - 01200 - 1260 (slit/mill edge) (+ 0.5/ - 0) / (+ 5/ - 0) + 6/ - 0

coil WeightThickness (mm) coil Weight (mt)0.35 - 0.40 (with AFP) 2 - 8Above 0.40 (with AFP) 5 - 10≥ 0.35 For all other Passivations including oil Upto 23

Bundle Weight : 1.0 - 5 Mt

coil StaggeringFor Soft Coils 10 mm max (+ / - 5 mm) / Straight WindingFor Hard Coils 20 mm max (+ / - 10 mm)Coil ID 508 mm / 610 mm Chromated

508 mm ASP.Edge Wavy Coil 3 mm, 3 wave / m

Mass Per Unit Area & coated ThicknessMetric coating Designation Minimum Triple Spot Average (Total both Sides) g/m²AZM 150 (AZ 50) Galvalume Sheet 150AZM 165 (AZ 55) Galvalume Sheet 165AZM 180 (AZ 60) Galvalume Sheet 180AZM 200 (AZ 67) Galvalume Sheet 200

Product Range & Specifications

Gal

valu

me


80

55% Aluminium - Zinc Coated Alloyed Steel Corrugated Sheets (JSW Vishwas Plus)

G.l. Thickness

(mm)

Maximum bundle

Weight (kgs)

Weight per piece (10 corrugations) (in kgs.) for different widths



0.35 52.27 4.36 5.08 5.81 6.53 7.26 8.71 10.16 11.62

0.40 60.02 5.00 5.84 6.67 7.50 8.34 10.00 11.67 13.34

0.45 67.77 5.65 6.59 7.53 8.47 9.41 11.30 13.18 15.06

0.50 75.52 6.29 7.34 8.39 9.44 10.49 12.59 14.68 16.78

0.55 83.28 6.94 8.10 9.25 10.41 11.57 13.88 16.19 18.51

0.60 91.03 7.59 8.85 10.11 11.38 12.64 15.17 17.70 20.23

0.63 95.68 7.97 9.30 10.63 11.96 13.29 15.95 18.60 21.26

0.65 97.75 8.15 9.50 10.86 12.22 13.58 16.29 19.01 21.72

0.70 106.53 8.88 10.36 11.84 13.32 14.80 17.76 20.71 23.67

0.75 113.09 9.42 10.99 12.57 14.14 15.71 18.85 21.99 25.13

0.80 122.04 10.17 11.87 13.56 15.26 16.95 20.34 23.73 27.12

WeiGhT PeR Piece chART

Galvalum

e


C Mn Si P S Al Cu Ni Cr Mo V Cb Ti N B Yield Strength

(Mpa min.)

Tensile Strength

(Mpa min)

% Elongation

Gauge Length (mm)

Direction(L / T ^)

ASTM A 792 CS -Type A 0.10 0.60 - 0.030 0.035 - 0.025 0.200 0.150 0.060 0.008 0.008 0.025 - - 205-410 - >=20 50 GL L

CS -Type B 0.020 to 0.15

0.60 - 0.030 0.035 - 0.025 0.200 0.150 0.060 0.008 0.008 0.025 - - 245-410 - >=20 50 GL L

CS -Type C 0.08 0.60 - 0.100 0.035 - 0.025 0.200 0.150 0.060 0.008 0.008 0.025 - - 205-450 - >=15 50 GL L

FS 0.020 to 0.10

0.50 - 0.020 0.035 - 0.025 0.200 0.150 0.060 0.008 0.008 0.025 - - 170-275 - >=24 50 GL L

DS 0.06 0.50 - 0.020 0.025 0.010 min. 0.025 0.200 0.150 0.060 0.008 0.008 0.025 - - 140-240 - >=30 50 GL L

HTS 0.020 to 0.15

0.60 - 0.04 min.

0.035 - 0.025 0.200 0.150 0.060 0.008 0.008 0.025 - - 205-450 - >=15 50 GL L

JIS G 3321 SGLCC 0.15 0.60 - 0.035 0.040 - - - - - - - - - - 205 270 24 - L

SGLCD - 270 31 - L

EN 10327 DX51D 0.12 0.60 0.50 0.100 0.045 - - - - - - - 0.3 - - - 270- 500 22 80 GL T

DX52D 140-300 270-420 26 80 GL T

DX53D 140-260 270-380 30 80 GL T

DX54D 120-220 260-350 36 80 GL T

AS 1397 G1 0.12 0.50 - 0.040 0.035 - - - - - - - - - - - - - - -

G2 0.10 0.45 - 0.030 0.030 - - - - - - - - - - - - 30 27 T

G3 0.08 0.40 - 0.020 0.025 - - - - - - - - - - - - 35 32 T

Note:^ L - Lateral ; T - Transverse

81

Galvalume - Soft (Commercial, Forming, Drawing)

Gal

valu

me


82



(Mpa min.)

Tensile Strength

(Mpa min)

% Elongation

Gauge Length (mm)

Direction(L / T ^)

ASTM A 792 CS -Type A 0.10 0.60 - 0.030 0.035 - 0.025 0.200 0.150 0.060 0.008 0.008 0.025 - - 205-410 - >=20 50 GL L

CS -Type B 0.020 to 0.15

0.60 - 0.030 0.035 - 0.025 0.200 0.150 0.060 0.008 0.008 0.025 - - 245-410 - >=20 50 GL L

CS -Type C 0.08 0.60 - 0.100 0.035 - 0.025 0.200 0.150 0.060 0.008 0.008 0.025 - - 205-450 - >=15 50 GL L

FS 0.020 to 0.10

0.50 - 0.020 0.035 - 0.025 0.200 0.150 0.060 0.008 0.008 0.025 - - 170-275 - >=24 50 GL L

DS 0.06 0.50 - 0.020 0.025 0.010 min. 0.025 0.200 0.150 0.060 0.008 0.008 0.025 - - 140-240 - >=30 50 GL L

HTS 0.020 to 0.15

0.60 - 0.04 min.

0.035 - 0.025 0.200 0.150 0.060 0.008 0.008 0.025 - - 205-450 - >=15 50 GL L

JIS G 3321 SGLCC 0.15 0.60 - 0.035 0.040 - - - - - - - - - - 205 270 24 - L

SGLCD - 270 31 - L

EN 10327 DX51D 0.12 0.60 0.50 0.100 0.045 - - - - - - - 0.3 - - - 270- 500 22 80 GL T

DX52D 140-300 270-420 26 80 GL T

DX53D 140-260 270-380 30 80 GL T

DX54D 120-220 260-350 36 80 GL T

AS 1397 G1 0.12 0.50 - 0.040 0.035 - - - - - - - - - - - - - - -

G2 0.10 0.45 - 0.030 0.030 - - - - - - - - - - - - 30 27 T

G3 0.08 0.40 - 0.020 0.025 - - - - - - - - - - - - 35 32 T


Galvalum

e



(Mpa min.)

Tensile Strength

(Mpa min.)

% Elongation

Gauge Length (mm)

Direction(L / T ^)

ASTM A 792 Grade 33 [230] 0.20 1.35 - 0.040 0.040 - 0.250 0.200 0.150 0.060 0.008 0.008 0.025 - - 230 310 20 50 GL L

Grade 37 [255] 0.20 1.35 - 0.100 0.040 - 0.250 0.200 0.150 0.060 0.008 0.008 0.025 - - 255 360 18 50 GL L

Grade 40 [275] 0.25 1.35 - 0.100 0.040 - 0.250 0.200 0.150 0.060 0.008 0.008 0.025 - - 275 380 16 50 GL L

Grade 50 [340] 0.25 1.35 - 0.200 0.040 - 0.250 0.200 0.150 0.060 0.008 0.008 0.025 - - 345 450 12 50 GL L

Grade 80 [550] 0.20 1.35 - 0.040 0.040 - 0.250 0.200 0.150 0.006 0.008 0.015 0.025 - - 550 570 - - L

JIS G 3321 SGLC400 0.40 1.70 - 0.200 0.040 - - - - - - - - - - 295 400 18 - L

SGLC440 335 440 16 - L

SGLC490 365 490 14 - L

SGLC570 560 570 - - L

EN 10326 S220GD 0.20 1.70 0.60 0.100 0.045 - - - - - - - - - - 220 300 20 80 GL L

S250GD 250 330 19 80 GL L

S280GD 280 360 18 80 GL L

S320GD 320 390 17 80 GL L

S350GD 350 420 16 - L

S550GD 550 560 - 80 GL L

AS 1397 G250 0.12 0.50 - 0.040 0.035 - - - - - - - - - - 250 320 25 22 L

G300 0.30 1.60 - 0.100 0.035 - - - - - - - - - - 300 340 20 18 L

G350 0.30 1.60 - 0.100 0.035 - - - - - - - - - - 350 420 15 14 L

G450 0.20 1.20 - 0.040 0.030 - - - - - - - - - - 450 480 10 9 L

G500 0.20 1.20 - 0.040 0.030 - - - - - - - - - - 500 520 8 7 L

G550 0.20 1.20 - 0.040 0.030 - - - - - - - - - - 550 550 2 2 L


83

Galvalume -Structural

Gal

valu

me


84



(Mpa min.)

Tensile Strength

(Mpa min.)

% Elongation

Gauge Length (mm)

Direction(L / T ^)

ASTM A 792 Grade 33 [230] 0.20 1.35 - 0.040 0.040 - 0.250 0.200 0.150 0.060 0.008 0.008 0.025 - - 230 310 20 50 GL L

Grade 37 [255] 0.20 1.35 - 0.100 0.040 - 0.250 0.200 0.150 0.060 0.008 0.008 0.025 - - 255 360 18 50 GL L

Grade 40 [275] 0.25 1.35 - 0.100 0.040 - 0.250 0.200 0.150 0.060 0.008 0.008 0.025 - - 275 380 16 50 GL L

Grade 50 [340] 0.25 1.35 - 0.200 0.040 - 0.250 0.200 0.150 0.060 0.008 0.008 0.025 - - 345 450 12 50 GL L

Grade 80 [550] 0.20 1.35 - 0.040 0.040 - 0.250 0.200 0.150 0.006 0.008 0.015 0.025 - - 550 570 - - L

JIS G 3321 SGLC400 0.40 1.70 - 0.200 0.040 - - - - - - - - - - 295 400 18 - L

SGLC440 335 440 16 - L

SGLC490 365 490 14 - L

SGLC570 560 570 - - L

EN 10326 S220GD 0.20 1.70 0.60 0.100 0.045 - - - - - - - - - - 220 300 20 80 GL L

S250GD 250 330 19 80 GL L

S280GD 280 360 18 80 GL L

S320GD 320 390 17 80 GL L

S350GD 350 420 16 - L

S550GD 550 560 - 80 GL L

AS 1397 G250 0.12 0.50 - 0.040 0.035 - - - - - - - - - - 250 320 25 22 L

G300 0.30 1.60 - 0.100 0.035 - - - - - - - - - - 300 340 20 18 L

G350 0.30 1.60 - 0.100 0.035 - - - - - - - - - - 350 420 15 14 L

G450 0.20 1.20 - 0.040 0.030 - - - - - - - - - - 450 480 10 9 L

G500 0.20 1.20 - 0.040 0.030 - - - - - - - - - - 500 520 8 7 L

G550 0.20 1.20 - 0.040 0.030 - - - - - - - - - - 550 550 2 2 L


Galvalum

e

85

Packing

Galvalum

e

109Galvalum

e

109

Eye to Sky Packing

Slit - Master Coil Packing

Gal

valu

me


86

Gal

valu

me

110

Gal

valu

me

110

Eye to Wall Packing - Coil

Sheet Packing

Pre-Painted Galvanised

Pre-Painted Galvanised

89

SpecificationsProduct SpecificationsProfile Coil / Corrugated / Trapeziodal / Ribbed / Manglore Tile Profile / Wave/ Arch

Trapeziodal Substrate Galvanised SteelZinc Coating (gsm) 90-275Hardness (HRB) 55-95Guard film-optional (microns) 30-40µ (Customised also)Standards JIS G 3312, ASTM A 755, EN 10169-1, IS 14246-1995

Paint Specifications

Paint System

Primers : Epoxy, PU polyester/universalTop coat : Regular Modified Polyester (RMP)/SMP/PVDF/SDPBacker coat : Epoxy,polyester & PU

Characteristics

Primer top coat (micron) Subject to Substrate & Coating Type

7µ (max.)

Top coat RMP( micron) (Coating Based) 20-25µ (max.)Primer + Backer coat (micron) 12-15µ (max.)Colour AS per RAL code/customer's

requirementGloss Matt 35% (+/- 5%)/semi-gloss 60% (+/-

5%) high gloss ≥ 70%

Performance TestingPencil Hardness H (min.)Impact test (in Joules) (thickness based Soft material)

As per JIS G 3312

Salt spray test (Specific to Coating Type) 750-1000 hrs.Adhesion test (cross-hatch) 100%Erichsen cupping test Upto 7 mmHumidity test 1000 hrs.T- Bend test (T = substrate thickness of Soft Material)

2 T (no tape loss)

Solvent rub test(MEK- double rub) >50 rubsChemical Resistance 5% NaOH, 5% HSSO4

No blistering, discolouration and softening of paint film

Max. operating temp Upto 120°C

coil FormCoil ID (mm) 508Thickness (TCT in mm) 0.25-1.50Width (mm) 600 - 1250Coil weight (t) 2-10 (if guard film: 1 - 2.5 t)

Pre-

Pain

ted

Galva

nise

d


90

Profile Rangecorrugated Profile

Thickness (TCT in mm) 0.25 - 0.80 mm

Coil Input Width 910 mm

Supply Width 800 ± 25 mm

Covered Width 686 mm

Pitch 75 ± 5 mm

Crest Height 17.5 ± 2.5mm

Length (mm) Upto 4877 mm

Trapezoidal Profile





Pitch 196 mm

Crest Height 32 ± 2 mm

Crest Width 45 mm

Lip 10 mm


Double Ribbed Trapezoidal Profile





Pitch 255 mm


Crest Width 26 mm

Lip 10 mm


Mangalore Tiled Profile





Pitch 200 mm



Pre-Painted Galvalume

Pre-Painted Galvalume

93

Product SpecificationsProfile Coil / Corrugated / Trapeziodal / Ribbed / Manglore Tile Profile / Wave/ Arch

Trapeziodal Substrate Al-Zinc alloy steelAl-Zinc Coating (gsm) 70-200Hardness(HRB) 60 ± 5HRB/90 ± 5HRBGuard film-optional (microns) 30-40µ (Customised also)Standards ASTM A 755, EN 10169-1, IS 14246-1995 (IS is only for Physical testing)

Paint SpecificationsPaint System * Primers : Epoxy, PU Polyester/Universal

Top coat : Regular Modified Polyester (RMP)/SMP/PVDF/SDPBacker coat: Epoxy, Polyester& PU

Characteristics Primer top coat (micron) subject to substrate & coating type

7µ (max.)

Top coat RMP (micron) (Coating Based) 20-25µ (max.)Primer + Backer coat (micron) 12-15µ (max.)Colour AS per RAL code/customer's

requirementGloss Matt 35% (+/- 5%)/semi-gloss 60%

(+/- 5%) high gloss > 70%

Performance TestingPencil Hardness H (min.)Impact test (in Joules) (thickness based soft material)

As per JIS G 3312

Salt spray test (specific to coating type) 750-1000 hrsAdhesion test (cross-hatch) 100%Erichsen cupping test Upto 7 mmHumidity test 1000 hrsT- Bend test (T = substrate thickness of soft material)

2 T (no tape loss)

Solvent rub test (MEK- double rub) >50 rubsChemical resistence 5% NaOH, 5% HSSO4

No blistering,discolouration and softening of paint film

Max. operating temp Upto 120°C

coil FormCoil ID (mm) 508Thickness (TCT in mm) 0.35-1.20Width (mm) 760 - 1335Coil weight (t) 2-10 (if guard film: 1 - 2.5 t)

Specifications

Pre-

Pain

ted

Galva

lum

e


94

Profile Rangecorrugated Profile

Thickness (TCT) 0.35 - 0.80 mm


Supply Width 800 ± 25mm


Pitch 75 ± 5mm

Crest Height 17.5 ± 2.5mm

Length Upto 4877 mm

Trapezoidal Profile



Supply Width 1060 ± 10mm


Pitch 196 mm


Crest Width 45 mm

Lip 10 mm

Length Upto 4877 mm

Double Ribbed Trapezoidal Profile





Pitch 255 mm


Crest Width 26 mm

Lip 10 mm

Length Upto 4877 mm

Mangalore Tiled Profile





Pitch 200 mm


Length Upto 4877 mm

TMT Bars

TMT B

ars

97

Re-benD PRoPeRTieSMandrel Diameter Upto & including

10 mmMandrel Diameter over

10 mmJSW TMT PLUS Fe-500 & Fe-500 D 4d 6dIS 1786:2008 Fe-500 D 4d 6dd: Nominal size of test piece in mm

cheMicAl PRoPeRTieS

% c % Mn % Si % S % P ce

JSW TMT PLUS Fe-500* 0.25 max. 0.80-1.00 0.10-0.40 0.038 max. 0.038 max. 0.41 max.

JSW TMT PLUS Fe-500 D* 0.18-0.23 0.80-1.00 0.10-0.40 0.005 - 0.035 0.005 - 0.035 0.31-0.36

IS 1786:2008 Fe-500 D 0.25 max. - - 0.040 max. 0.040 max. 0.42 max.

*Typical values for 95 % heats

benD PRoPeRTieS

Mandrel Diameter Upto & including 20 mm

Mandrel Diameterover 20 mm

JSW TMT PLUS Fe-500 & Fe-500 D 3d 4d

IS 1786:2008 Fe-500 D 3d 4d

d: nominal size of test piece in mm

MechAnicAl PRoPeRTieS

yield Strength n/mm2 (min.)

Tensile Strength n/mm2 (min.)

UTS/yS Ratio % elongation (min.)

JSW TMT PLUS Fe-500* 530 600 1.13 min. 16

JSW TMT PLUS Fe-500 D* 530 610 1.15 min. 18

IS 1786:2008 Fe-500 D 500 565 1.13 min. 16

*Typical values for 95% heats

Properties

TMT

Bar

s


98

nominal Size (mm) Mass per Meter (kg)*

08 0.395

10 0.617

12 0.888

16 1.580

20 2.470

25 3.850

28 4.830

32 6.310

36 7.990

40 9.860

* Supplies will be in line with Weight Tolerance as per IS 1786 : 2008

Product Range and Nominal Weight

Wire Rods, Bars & Spring Steel Flats

SpecificationsMetallurgical & Mechanical Properties

Macroetch (ASTM E - 381) C2R2S2 max.

Ultrasonic Test 20% D.E max. no loss in B W E

Cleanliness (Inclusion) Type (As per ASTM E - 45)

Thin (max.) Thick (max.)

A 1.00* 0.50

B 0.50 0.50

C 0.50 NIL

D 1.00 0.50

(* Depends on %S)

As per DIN 5060 K4 - 20 max.

Step Down Test Can also be ensured as per customer specifications

Grain Size 5 - 8 As per ASTM E - 112 (Grade specific)

Hardeneability Within 6 HRC max. for single point spec.

Surface Defect Depth 0.30 mm max. (For rolled bars)

Grade & Composition As per specification

Gases

H2 - 2.5 ppm (Lower levels available on prior agreement

O2 - On Low Carbon < 25 ppm (12 ppm max for Customer Specific)

O2 - On Medium Carbon < 20 ppm (12 ppm max for Customer Specific)

O2 - On Ball Bearing Steel < 12 ppm

N2 - 90 ppm max. (Possible to control in restricted range upto 220 ppm)

Specific Requirement can be tailor made

Residuals (%)element commitments level at JSW (Standard)

Ni 0.25 max. 0.01

Cr 0.20 max. 0.02

Mo 0.10 max. 0.001

Cu 0.25 max. 0.02

Sn 0.03 max. 0.001

Al 0.020 / 0.060 0.020 / 0.040

coil Dimensions

Coil Inner Diameter (mm) 900

Coil Outer Diameter (mm) 1300

Coil Length (mm) 1100

Coil Weight (mt)

- Salem 1.20 - 1.35

- Vijayanagar 1.20 - 2.50

101

Wire Rods, Bars & Special Steel Flats

Product Mixcast Products - Billets & Blooms 100x100, 130x130, 160x160, 250x250, 340x400 mm - Rounds 160, 180, 200, 220, 310 mmbar & Rod Mill - Wire Rod 5.5 to 32.0 mm - Bars 20 to 60 mm - Flats 60x7 to 101.11x12.7 mmblooming Mill - RCS 55, 63, 75, 80, 90, 95, 100, 125, 140, 160, 180, 200, 240 mm - Rounds 56 to 200 mm - Flats 120x20, 120x30, 120x40, 130x20, 130x30, 130x40 mm

Flats

nominal Width (mm)Tolerance (mm)

Width Thickness concavity≤ 10 > 10 (max.)

> 50, ≤ 75 ± 0.50 ± 0.15 ± 0.20 0.10> 75, ≤ 100 ± 0.70 ± 0.20 ± 0.25 0.15

> 100, ≤ 125 ± 0.90 ± 0.25 ± 0.40 0.20

102

Wire

Rods

, Bars

& Sp

ecial

Stee

l Flat

s

Round cornered Squarenominal Size Tolerance (mm)

Permissible Deviation out of Roundness (+) (-) (max.)

> 0, ≤ 50 0.6 0.6 0.6> 50, ≤ 64 1.2 1.2 0.8> 64, ≤ 89 1.8 1.8 1.3> 89, ≤ 100 2.4 - 1.8> 100, ≤ 114 2.4 - 1.8> 114, ≤ 125 3.0 - 2.5

bars & Wire Rodsnominal Size Tolerance (mm)

Permissible Deviation

out of Roundness

(+) (-) (max.)> 0, ≤ 8 0.20 0.25 0.30> 8, ≤ 11 0.25 0.25 0.30> 11, ≤ 15 0.30 0.20 0.35> 15, ≤ 22 0.30 0.20 0.40> 22, ≤ 28 0.30 0.25 0.40> 28, ≤ 34 0.30 0.30 0.50> 34, ≤ 38 0.36 0.30 0.60> 38, ≤ 50 0.40 0.30 0.60> 50, ≤ 64 0.80 0.00 0.80

bars / Roundsnominal Size Tolerance (mm)

Permissible Deviation out of Roundness (+) (-) (max.)

> 50, ≤ 64 0.8 0.0 0.8> 64, ≤ 80 1.2 0.0 0.8> 80, ≤ 89 0.2 0.0 0.8> 89, ≤ 100 1.6 0.0 1.2> 100, ≤ 114 1.6 0.0 1.2> 114, ≤ 125 2.0 0.0 1.5> 125, ≤ 139 2.0 0.0 1.5> 139, ≤ 160 3.2 0.0 2.0> 160, ≤ 164 3.2 0.0 2.0> 164, ≤ 200 4.0 0.0 2.5

ToleRAnce liMiTS


103

Grade chemical composition (Values are in %) chemical composition (Values are in %)

C Si Mn P S Cr Mo B

min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max.

SAE 1006 - 0.08 - - 0.25 0.40 - 0.030 - 0.050 - - - - - -

SAE 1008 - 0.10 - - 0.30 0.50 - 0.030 - 0.050 - - - - - -

SAE 1010 0.08 0.13 - - 0.30 0.60 - 0.030 - 0.050 - - - - - -

SAE 1012 0.10 0.15 - - 0.30 0.60 - 0.030 - 0.050 - - - - - -

SAE 1015 0.13 0.18 - - 0.30 0.60 - 0.030 - 0.050 - - - - - -

SAE 1018 0.15 0.20 - - 0.60 0.90 - 0.030 - 0.050 - - - - - -

SAE 1020 0.18 0.23 - - 0.30 0.60 - 0.030 - 0.050 - - - - - -

SAE 1541 0.36 0.44 - - 1.35 1.65 - 0.030 - 0.050 - - - - - -

SAE 4140 0.38 0.43 0.15 0.35 0.75 1.00 - 0.030 - 0.040 0.80 1.10 0.15 0.25 - -

SAE 10B21 0.18 0.23 - 0.30 0.80 1.10 - 0.030 - 0.030 0.10 0.20 - - 0.0005 0.003

SAE 15B25 0.23 0.28 - 0.30 0.90 1.30 - 0.030 - 0.030 0.10 0.20 - - 0.0005 0.003

SAE 15B35H 0.31 0.39 0.15 0.35 0.70 1.20 - 0.040 - 0.050 0.10 0.30 - - 0.0005 0.003

SAE 15B41 0.36 0.44 0.15 0.30 1.35 1.65 - 0.030 - 0.030 0.10 0.20 - - 0.0005 0.003

19MnB4M 0.20 0.25 0.15 0.30 0.80 1.10 - 0.030 - 0.030 0.30 0.40 - - 0.0008 0.003

Cold Heading Quality - Wire Rods & Bars

Wire

Rods

, Bars

& Sp

ecial

Stee

l Flat

s


104


C Si Mn P S Cr Mo B


SAE 1006 - 0.08 - - 0.25 0.40 - 0.030 - 0.050 - - - - - -

SAE 1008 - 0.10 - - 0.30 0.50 - 0.030 - 0.050 - - - - - -

SAE 1010 0.08 0.13 - - 0.30 0.60 - 0.030 - 0.050 - - - - - -

SAE 1012 0.10 0.15 - - 0.30 0.60 - 0.030 - 0.050 - - - - - -

SAE 1015 0.13 0.18 - - 0.30 0.60 - 0.030 - 0.050 - - - - - -

SAE 1018 0.15 0.20 - - 0.60 0.90 - 0.030 - 0.050 - - - - - -

SAE 1020 0.18 0.23 - - 0.30 0.60 - 0.030 - 0.050 - - - - - -

SAE 1541 0.36 0.44 - - 1.35 1.65 - 0.030 - 0.050 - - - - - -

SAE 4140 0.38 0.43 0.15 0.35 0.75 1.00 - 0.030 - 0.040 0.80 1.10 0.15 0.25 - -

SAE 10B21 0.18 0.23 - 0.30 0.80 1.10 - 0.030 - 0.030 0.10 0.20 - - 0.0005 0.003

SAE 15B25 0.23 0.28 - 0.30 0.90 1.30 - 0.030 - 0.030 0.10 0.20 - - 0.0005 0.003

SAE 15B35H 0.31 0.39 0.15 0.35 0.70 1.20 - 0.040 - 0.050 0.10 0.30 - - 0.0005 0.003

SAE 15B41 0.36 0.44 0.15 0.30 1.35 1.65 - 0.030 - 0.030 0.10 0.20 - - 0.0005 0.003

19MnB4M 0.20 0.25 0.15 0.30 0.80 1.10 - 0.030 - 0.030 0.30 0.40 - - 0.0008 0.003


105

Grade Chemical Composition % Chemical Composition %C Si Mn P S Cr Mo Ni V

min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max.cr SteelEN 18 0.36 0.44 0.10 0.35 0.60 0.90 - 0.035 - 0.040 0.90 1.20 - - - - - -EN 18 D 0.38 0.43 0.10 0.35 0.60 0.80 - 0.035 - 0.040 0.90 1.20 - - - - - -EN 31 0.95 1.10 0.10 0.35 0.40 0.70 - 0.035 - 0.040 1.20 1.60 - - - - - -15Cr3 0.12 0.18 0.15 0.40 0.40 0.60 - 0.035 - 0.035 0.40 0.70 - - - - - -17Cr3 0.14 0.20 - 0.40 0.60 0.90 - 0.035 - 0.035 0.70 1.00 - - - - - -SAE 52100 0.98 1.10 0.15 0.35 0.25 0.45 - 0.025 - 0.025 1.30 1.60 - - - - - -46Cr4 0.45 0.49 0.15 0.40 0.80 0.90 - 0.025 - 0.025 0.90 1.00 - - - - - -cr - Mn Steel16MnCr5 0.14 0.19 - 0.40 1.00 1.30 - 0.035 - 0.035 0.80 1.10 - - - - - -16MnCrS5 0.14 0.19 - 0.40 1.00 1.30 - 0.035 0.020 0.040 0.80 1.10 - - - - - -20MnCr5 0.17 0.22 - 0.40 1.10 1.40 - 0.035 - 0.035 1.00 1.30 - - - - - -20MnCrS5 0.17 0.22 - 0.40 1.10 1.40 - 0.035 0.020 0.040 1.00 1.30 - - - - - -cr - Mo SteelEN 19 0.36 0.44 0.10 0.35 0.70 1.00 - 0.035 - 0.040 0.90 1.20 0.25 0.35 - - - -EN 19C 0.40 0.45 0.10 0.35 0.75 1.00 - 0.035 - 0.040 0.90 1.20 0.15 0.25SCM 415 0.13 0.18 0.15 0.35 0.60 0.90 - 0.030 - 0.030 0.90 1.20 - - - 0.25 - -SCM 415H 0.12 0.18 0.15 0.35 0.55 0.95 - 0.030 - 0.030 0.85 1.25 - - - 0.25 - -SCM 420 0.18 0.23 0.15 0.35 0.60 0.90 - 0.030 - 0.030 0.90 1.20 - - - 0.25 - -42CrMo4 0.38 0.45 - 0.40 0.60 0.90 - 0.035 - 0.035 0.90 1.20 0.15 0.30 - - -SAE 4130 0.28 0.33 0.15 0.35 0.40 0.60 - 0.030 - 0.040 0.80 1.10 0.15 0.25 - 0.25 - -SAE 4140H 0.37 0.44 0.15 0.35 0.65 1.10 - 0.040 - 0.030 0.75 1.20 0.15 0.25 - 0.25 - -SAE 4142H 0.39 0.46 0.15 0.35 0.65 1.10 - 0.040 - 0.030 0.75 1.20 0.15 0.25 - 0.25 - -SS 4510 0.18 0.24 0.30 0.60 1.40 1.70 - 0.035 0.15 0.035 - 0.25 - 0.30 - 0.30 - 0.05SMN 443H 0.39 0.46 0.20 0.35 1.30 1.70 - 0.025 - 0.015 - 0.35 - 0.05 - 0.15 - -708A42 0.40 0.45 0.15 0.35 0.70 1.00 - 0.035 0.03 0.050 0.90 1.20 0.15 - - - - -cr - ni - Mo SteelSAE 8620 0.18 0.23 0.15 0.35 0.70 0.90 - 0.030 - 0.040 0.40 0.60 0.15 0.25 0.40 0.70 - -SAE 8620H 0.17 0.23 0.15 0.35 0.60 0.95 - 0.040 - 0.030 0.35 0.65 0.15 0.25 0.35 0.75 - -SAE 8627H 0.24 0.30 0.15 0.35 0.60 0.95 - 0.040 - 0.030 0.35 0.65 0.15 0.25 0.35 0.75 - -EN353 0.14 0.20 - 0.35 0.50 1.00 - 0.050 - 0.050 0.75 1.25 0.08 0.15 1.00 1.50 - -c - Mn SteelSAE 1548 0.44 0.50 0.20 0.35 1.10 1.40 - 0.025 - 0.015 0.10 0.20 - 0.06 - 0.20 - -b SteelSAE 1036B 0.32 0.37 0.15 0.30 1.20 1.50 - 0.025 - 0.025 - 0.20 - 0.05 - 0.25 - -Micro Alloy Steel27MnSiVS6 0.25 0.30 0.50 0.80 1.30 1.60 - 0.035 0.030 0.050 - - - - - - 0.08 0.13SCR 420Hv N2:150-200 0.18 0.23 0.15 0.35 0.60 0.85 - 0.030 0.010 0.030 0.90 1.20 - - - - - -SCM 420Hv N2:150-200 0.18 0.23 0.15 0.35 0.60 0.85 - 0.030 0.010 0.030 0.90 1.20 0.15 0.30 - - - -

Low Alloy Steel - Wire Rods & Bars

Wire

Rods

, Bars

& Sp

ecial

Stee

l Flat

s


106

Grade Chemical Composition % Chemical Composition %C Si Mn P S Cr Mo Ni V

min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max.cr SteelEN 18 0.36 0.44 0.10 0.35 0.60 0.90 - 0.035 - 0.040 0.90 1.20 - - - - - -EN 18 D 0.38 0.43 0.10 0.35 0.60 0.80 - 0.035 - 0.040 0.90 1.20 - - - - - -EN 31 0.95 1.10 0.10 0.35 0.40 0.70 - 0.035 - 0.040 1.20 1.60 - - - - - -15Cr3 0.12 0.18 0.15 0.40 0.40 0.60 - 0.035 - 0.035 0.40 0.70 - - - - - -17Cr3 0.14 0.20 - 0.40 0.60 0.90 - 0.035 - 0.035 0.70 1.00 - - - - - -SAE 52100 0.98 1.10 0.15 0.35 0.25 0.45 - 0.025 - 0.025 1.30 1.60 - - - - - -46Cr4 0.45 0.49 0.15 0.40 0.80 0.90 - 0.025 - 0.025 0.90 1.00 - - - - - -cr - Mn Steel16MnCr5 0.14 0.19 - 0.40 1.00 1.30 - 0.035 - 0.035 0.80 1.10 - - - - - -16MnCrS5 0.14 0.19 - 0.40 1.00 1.30 - 0.035 0.020 0.040 0.80 1.10 - - - - - -20MnCr5 0.17 0.22 - 0.40 1.10 1.40 - 0.035 - 0.035 1.00 1.30 - - - - - -20MnCrS5 0.17 0.22 - 0.40 1.10 1.40 - 0.035 0.020 0.040 1.00 1.30 - - - - - -cr - Mo SteelEN 19 0.36 0.44 0.10 0.35 0.70 1.00 - 0.035 - 0.040 0.90 1.20 0.25 0.35 - - - -EN 19C 0.40 0.45 0.10 0.35 0.75 1.00 - 0.035 - 0.040 0.90 1.20 0.15 0.25SCM 415 0.13 0.18 0.15 0.35 0.60 0.90 - 0.030 - 0.030 0.90 1.20 - - - 0.25 - -SCM 415H 0.12 0.18 0.15 0.35 0.55 0.95 - 0.030 - 0.030 0.85 1.25 - - - 0.25 - -SCM 420 0.18 0.23 0.15 0.35 0.60 0.90 - 0.030 - 0.030 0.90 1.20 - - - 0.25 - -42CrMo4 0.38 0.45 - 0.40 0.60 0.90 - 0.035 - 0.035 0.90 1.20 0.15 0.30 - - -SAE 4130 0.28 0.33 0.15 0.35 0.40 0.60 - 0.030 - 0.040 0.80 1.10 0.15 0.25 - 0.25 - -SAE 4140H 0.37 0.44 0.15 0.35 0.65 1.10 - 0.040 - 0.030 0.75 1.20 0.15 0.25 - 0.25 - -SAE 4142H 0.39 0.46 0.15 0.35 0.65 1.10 - 0.040 - 0.030 0.75 1.20 0.15 0.25 - 0.25 - -SS 4510 0.18 0.24 0.30 0.60 1.40 1.70 - 0.035 0.15 0.035 - 0.25 - 0.30 - 0.30 - 0.05SMN 443H 0.39 0.46 0.20 0.35 1.30 1.70 - 0.025 - 0.015 - 0.35 - 0.05 - 0.15 - -708A42 0.40 0.45 0.15 0.35 0.70 1.00 - 0.035 0.03 0.050 0.90 1.20 0.15 - - - - -cr - ni - Mo SteelSAE 8620 0.18 0.23 0.15 0.35 0.70 0.90 - 0.030 - 0.040 0.40 0.60 0.15 0.25 0.40 0.70 - -SAE 8620H 0.17 0.23 0.15 0.35 0.60 0.95 - 0.040 - 0.030 0.35 0.65 0.15 0.25 0.35 0.75 - -SAE 8627H 0.24 0.30 0.15 0.35 0.60 0.95 - 0.040 - 0.030 0.35 0.65 0.15 0.25 0.35 0.75 - -EN353 0.14 0.20 - 0.35 0.50 1.00 - 0.050 - 0.050 0.75 1.25 0.08 0.15 1.00 1.50 - -c - Mn SteelSAE 1548 0.44 0.50 0.20 0.35 1.10 1.40 - 0.025 - 0.015 0.10 0.20 - 0.06 - 0.20 - -b SteelSAE 1036B 0.32 0.37 0.15 0.30 1.20 1.50 - 0.025 - 0.025 - 0.20 - 0.05 - 0.25 - -Micro Alloy Steel27MnSiVS6 0.25 0.30 0.50 0.80 1.30 1.60 - 0.035 0.030 0.050 - - - - - - 0.08 0.13SCR 420Hv N2:150-200 0.18 0.23 0.15 0.35 0.60 0.85 - 0.030 0.010 0.030 0.90 1.20 - - - - - -SCM 420Hv N2:150-200 0.18 0.23 0.15 0.35 0.60 0.85 - 0.030 0.010 0.030 0.90 1.20 0.15 0.30 - - - -


107

Grade chemical composition (Values are in %)

C Si Mn P S

min. max. min. max. min. max. min. max. min. max.

EN 2A / 040 A 10 0.08 0.13 0.10 0.40 0.30 0.50 - 0.050 - 0.050

EN 3B,070 M 20 0.16 0.24 0.10 0.40 0.50 0.90 - 0.050 - 0.050

EN 8 0.36 0.44 0.10 0.40 0.60 1.00 - 0.050 - 0.050

EN 8A 0.33 0.38 0.10 0.40 0.70 0.90 - 0.050 - 0.050

EN 8D 0.40 0.45 0.10 0.40 0.70 0.90 - 0.050 - 0.050

EN 9 0.50 0.60 0.10 0.50 0.50 0.90 - 0.050 - 0.050

EN 43B / 080A47 0.45 0.50 0.10 0.40 0.70 0.90 - 0.050 - 0.050

EN 43C 0.50 0.55 0.10 0.40 0.70 0.90 - 0.050 - 0.050

EN 43D / 060 A 62 0.60 0.65 0.10 0.40 0.50 0.70 - 0.050 - 0.050

EN 42 0.70 0.82 0.10 0.35 0.60 0.80 - 0.050 - 0.050

EN 15 0.32 0.40 0.10 0.40 1.30 1.70 - 0.050 - 0.050

EN 15B 0.32 0.40 0.10 0.40 1.00 1.40 - 0.050 - 0.050

S10C 0.08 0.13 0.15 0.35 0.30 0.60 - 0.030 - 0.035

S15C 0.13 0.18 0.15 0.35 0.30 0.60 - 0.030 - 0.035

S20C 0.18 0.23 0.15 0.35 0.30 0.60 - 0.030 - 0.035

S25C 0.22 0.28 0.15 0.35 0.30 0.60 - 0.030 - 0.035

S30C 0.27 0.33 0.15 0.35 0.60 0.90 - 0.030 - 0.035

S35C 0.32 0.38 0.15 0.35 0.60 0.90 - 0.030 - 0.035

S38C 0.35 0.41 0.15 0.35 0.60 0.90 - 0.030 - 0.035

S40C 0.37 0.43 0.15 0.35 0.60 0.90 - 0.030 - 0.035

S43C 0.40 0.46 0.15 0.35 0.60 0.90 - 0.030 - 0.035

S45C 0.42 0.48 0.15 0.35 0.60 0.90 - 0.030 - 0.035

S48C 0.45 0.51 0.15 0.35 0.60 0.90 - 0.030 - 0.035

S53C 0.50 0.56 0.15 0.35 0.60 0.90 - 0.030 - 0.035

S55C 0.52 0.58 0.15 0.35 0.60 0.90 - 0.030 - 0.035

ASTM A 105 - 0.35 - 0.35 0.60 1.05 - 0.040 - 0.050

27C15 / 27Mn2 0.22 0.32 0.10 0.35 1.30 1.70 - - - -

15C8 0.10 0.20 - - 0.60 0.90 - - - -

20C8 0.15 0.25 - - 0.60 0.90 - - - -

25C8 0.20 0.30 - - 0.60 0.90 - - - -

30C8 0.25 0.35 - - 0.60 0.90 - - - -

35C8 0.30 0.40 - - 0.60 0.90 - - - -

Forging Quality - Wire Rods & Bars

Wire

Rods

, Bars

& Sp

ecial

Stee

l Flat

s


108


C Si Mn P S


45C8 0.40 0.50 - - 0.60 0.90 - - - -

55C8 0.50 0.60 - - 0.60 0.90 - - - -

SAE 1016 0.13 0.18 - - 0.60 0.90 - 0.030 - 0.050

SAE 1025 0.22 0.28 - - 0.30 0.60 - 0.030 - 0.050

SAE 1027 0.22 0.29 - - 1.20 1.55 - 0.040 - 0.050

SAE 1030 0.28 0.34 - - 0.60 0.90 - 0.030 - 0.050

SAE 1035 0.32 0.38 - - 0.60 0.90 - 0.030 - 0.050

SAE 1038 0.35 0.42 - - 0.60 0.90 - 0.030 - 0.050

SAE 1040 0.37 0.44 - - 0.60 0.90 - 0.030 - 0.050

SAE 1045 0.43 0.50 - - 0.60 0.90 - 0.030 - 0.050

SAE 1045H 0.42 0.51 0.15 0.35 0.50 1.00 - 0.040 - 0.050

SAE 1050 0.48 0.55 - - 0.60 0.90 - 0.030 - 0.050

SAE 1060 0.55 0.65 - - 0.60 0.90 - 0.030 - 0.050

SAE 1522 0.18 0.24 - - 1.10 1.40 - 0.030 - 0.050

SAE 1524 0.19 0.25 - - 1.35 1.65 - 0.030 - 0.050

SAE 1541 0.36 0.44 - - 1.35 1.65 - 0.030 - 0.050

C 14 0.10 0.18 - - 0.40 0.70 - - - -

C 14 / 15Mn3 0.12 0.18 0.10 0.20 0.70 0.90 - - - -

C 15 0.20 - - 0.30 0.60 - - - - -

C 30 0.27 0.34 - 0.40 0.50 0.80 - 0.045 - 0.045

C 35 0.32 0.39 - 0.40 0.50 0.80 - 0.045 - 0.045

C 40 0.37 0.44 - 0.40 0.50 0.80 - 0.045 - 0.045

C 45 0.42 0.50 - 0.40 0.50 0.80 - 0.045 - 0.045

C 45E / CK 45 0.42 0.50 - 0.40 0.50 0.80 - 0.045 - 0.045

C 55 0.47 0.55 - 0.40 0.60 0.90 - 0.045 - 0.045

C 60 0.57 0.65 - 0.40 0.60 0.90 - 0.045 - 0.045

C 22.8/ P250GH 0.18 0.23 - 0.40 0.30 0.90 - 0.025 - 0.015

ASTM A 350 LF2 - 0.30 0.15 0.30 - 1.35 - 0.035 - 0.040

F11Cr : 1.00-1.50Mo : 0.44-0.65

0.05 0.15 0.50 1.00 0.30 0.60 - 0.025 - 0.025

F22Cr : 2.00-2.50Mo : 0.90-1.10

0.05 0.15 - 0.50 0.30 0.60 - 0.025 - 0.025


109


C Si Mn P S


SWRH 27 0.24 0.31 0.15 0.35 0.30 0.60 - 0.030 - 0.030

SWRH 32 0.29 0.36 0.15 0.35 0.30 0.60 - 0.030 - 0.030

SWRH 37 0.34 0.41 0.15 0.35 0.30 0.60 - 0.030 - 0.030

SWRH 42A 0.39 0.46 0.15 0.35 0.30 0.60 - 0.030 - 0.030

SWRH 42B 0.39 0.46 0.15 0.35 0.60 0.90 - 0.030 - 0.030

SWRH 47A 0.44 0.51 0.15 0.35 0.30 0.60 - 0.030 - 0.030

SWRH 47B 0.44 0.51 0.15 0.35 0.60 0.90 - 0.030 - 0.030

SWRH 52A 0.49 0.56 0.15 0.35 0.30 0.60 - 0.030 - 0.030

SWRH 52B 0.49 0.56 0.15 0.35 0.60 0.90 - 0.030 - 0.030

SWRH 57A 0.54 0.61 0.15 0.35 0.30 0.60 - 0.030 - 0.030

SWRH 57B 0.54 0.61 0.15 0.35 0.60 0.90 - 0.030 - 0.030

SWRH 62A 0.59 0.66 0.15 0.35 0.30 0.60 - 0.030 - 0.030

SWRH 62B 0.59 0.66 0.15 0.35 0.60 0.90 - 0.030 - 0.030

SWRH 67A 0.64 0.71 0.15 0.35 0.30 0.60 - 0.030 - 0.030

SWRH 67B 0.64 0.71 0.15 0.35 0.60 0.90 - 0.030 - 0.030

SWRH 72A 0.69 0.76 0.15 0.35 0.30 0.60 - 0.030 - 0.030

SWRH 72B 0.69 0.76 0.15 0.35 0.60 0.90 - 0.030 - 0.030

SWRH 77A 0.74 0.81 0.15 0.35 0.30 0.60 - 0.030 - 0.030

SWRH 77B 0.74 0.81 0.15 0.35 0.60 0.90 - 0.030 - 0.030

SWRH 82A 0.79 0.86 0.15 0.35 0.30 0.60 - 0.030 - 0.030

SWRH 82B 0.79 0.86 0.15 0.35 0.60 0.90 - 0.030 - 0.030

High Carbon - Wire Rods

Wire

Rods

, Bars

& Sp

ecial

Stee

l Flat

s


110

Welding Electrode Quality - Wire RodsGrade chemical composition (Values are in %)

C Si Mn P S Mo

min. max. min. max. min. max. min. max. min. max. min. max.

EM 12K 0.05 0.15 0.10 0.35 0.80 1.25 - 0.030 - 0.030 - -

ER 706S-6 0.07 0.10 0.80 1.00 1.40 1.60 - 0.020 - 0.020 - -

S2Mo 0.07 0.15 0.05 0.20 0.95 1.30 - 0.025 - 0.025 0.45 0.65

EWNR - 0.10 - 0.03 0.38 0.62 - 0.025 - 0.025 - -

RG Wire 0.05 0.09 - 0.04 0.45 0.60 - 0.010 - 0.010 - 0.020


C Si Mn P S Pb


EN 1A - 0.15 - - 0.90 1.30 - 0.070 0.200 0.300 - -

EN 1 A (Pb) - 0.15 - - 0.90 1.30 - 0.070 0.200 0.300 0.20 0.30

EN 8M 0.32 0.40 - 0.25 1.00 1.40 - 0.060 0.120 0.200 - -

EN 15AM 0.32 0.40 - 0.25 1.30 1.70 - 0.060 0.120 0.200 - -

11SMn30 - 0.14 - 0.05 0.90 1.30 - 0.110 0.270 0.330 - -

11SMnPb30 - 0.14 - 0.05 0.90 1.30 - 0.110 0.270 0.330 0.20 0.35

SAE 12L14 - 0.15 - - 0.85 1.15 0.040 0.090 0.260 0.350 0.15 0.35

SAE 1117 0.14 0.20 - - 1.00 1.30 - 0.040 0.080 0.130 - -

SAE 1118 0.14 0.20 - - 1.30 1.60 - 0.040 0.080 0.130 - -

SAE 1141 0.37 0.45 - - 1.35 1.65 - 0.040 0.080 0.130 - -

SAE 1144 0.40 0.48 - - 1.35 1.65 - 0.040 0.080 0.130 - -

SAE 1146 0.42 0.49 - - 0.70 1.00 - 0.040 0.080 0.130 - -

File Steel - Wire Rods & BarsGrade chemical composition (Values are in %)

C Si Mn P S Cr


14Cr3 1.25 1.35 0.20 0.40 - 0.30 - 0.030 - 0.030 0.50 0.70

Free Cutting Steel - Wire Rods & Bars


111 Seamless Boiler Quality Grade - Bars

Grade chemical composition % chemical composition (Values are in %)

C Si Mn P S Cr V B


EN 45 A 0.55 0.60 1.80 2.10 0.80 1.00 - 0.040 - 0.035 0.15 0.30 - - - -

SUP 9 0.52 0.60 0.15 0.35 0.65 0.95 - 0.040 - 0.035 0.65 0.95 - - - -

SUP 9A 0.56 0.64 0.15 0.35 0.70 1.00 - 0.040 - 0.035 0.70 1.00 - - - -

SUP 11 A 0.56 0.64 0.15 0.35 0.70 1.00 - 0.040 - 0.035 0.70 1.00 - - 0.0005 -

65Si7 0.60 0.68 1.50 1.80 0.70 1.00 - 0.050 - 0.050 - - - - - -

SAE 9254 0.51 0.59 1.20 1.60 0.60 0.80 - 0.040 - 0.040 0.60 0.80 - - - -

50CrV4 0.47 0.55 - 0.40 0.70 1.10 - 0.040 - 0.030 0.90 1.20 0.10 0.20 - -


C Si Mn P S Cu Cr Ni Mo V

min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max.

SAE 106 Gr B - 0.30 0.10 - 0.29 1.06 - 0.040 - 0.035 - 0.40 - 0.40 - 0.40 - 0.15 - 0.08

SA 210 Gr A1 - 0.27 0.10 - 0.93 - - 0.040 - 0.035 - - - - - - - - - -

SA 210 Gr C - 0.35 0.10 - 0.29 1.06 - 0.040 - 0.035 - - - - - - - - - -

T11 - A 250 0.05 0.15 0.50 1.00 0.30 0.60 - 0.030 - 0.020 - - 1.00 1.50 - - 0.44 0.65 - -

T22 - A 250 - 0.15 - 0.50 0.30 0.60 - 0.030 - 0.020 - - 1.90 2.60 - - 0.87 1.13 - -

Spring Steel Flats

Wire

Rods

, Bars

& Sp

ecial

Stee

l Flat

s


112

Grade chemical composition % chemical composition (Values are in %)

C Si Mn P S Cr V B


EN 45 A 0.55 0.60 1.80 2.10 0.80 1.00 - 0.040 - 0.035 0.15 0.30 - - - -

SUP 9 0.52 0.60 0.15 0.35 0.65 0.95 - 0.040 - 0.035 0.65 0.95 - - - -

SUP 9A 0.56 0.64 0.15 0.35 0.70 1.00 - 0.040 - 0.035 0.70 1.00 - - - -

SUP 11 A 0.56 0.64 0.15 0.35 0.70 1.00 - 0.040 - 0.035 0.70 1.00 - - 0.0005 -

65Si7 0.60 0.68 1.50 1.80 0.70 1.00 - 0.050 - 0.050 - - - - - -

SAE 9254 0.51 0.59 1.20 1.60 0.60 0.80 - 0.040 - 0.040 0.60 0.80 - - - -

50CrV4 0.47 0.55 - 0.40 0.70 1.10 - 0.040 - 0.030 0.90 1.20 0.10 0.20 - -


C Si Mn P S Cu Cr Ni Mo V

min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max.

SAE 106 Gr B - 0.30 0.10 - 0.29 1.06 - 0.040 - 0.035 - 0.40 - 0.40 - 0.40 - 0.15 - 0.08

SA 210 Gr A1 - 0.27 0.10 - 0.93 - - 0.040 - 0.035 - - - - - - - - - -

SA 210 Gr C - 0.35 0.10 - 0.29 1.06 - 0.040 - 0.035 - - - - - - - - - -

T11 - A 250 0.05 0.15 0.50 1.00 0.30 0.60 - 0.030 - 0.020 - - 1.00 1.50 - - 0.44 0.65 - -

T22 - A 250 - 0.15 - 0.50 0.30 0.60 - 0.030 - 0.020 - - 1.90 2.60 - - 0.87 1.13 - -

Marketing Office

MuMbai Victoria House, Pandurang Budhkar Marg, Lower Parel, Mumbai - 400 013

Ph.: 022-24927000, Fax:022- 24917998, Email: [email protected]

Sales Offices

aHMEDabaD 410, Abhishilp Complex, Near Keshavbag Party Plot, Manasi Cross Road, Sattellite, Ahmedabad - 380 015

Ph.: 079-40029509, 40029510, Email: [email protected]

bEngaluru Mktg. Off : The Estate, 3rd Floor, West Wing, 121, Dickenson Road, Bengaluru - 560 042

Ph.: 080-42448888, Fax: 080-42448820, Email: [email protected]

CHEnnai GE GE Manor, New No. 34 (Old No. 161), Next to Appolo Hospital, Greams Road, Chennai - 600 006

Ph.: 044-28297420 / 421, Fax: 044-24362691, Email: [email protected]

COiMbatOrE 4th Floor, Aishwaria Commercial Centre, 196/43, R. S. Puram, T. V. Swamy Road (West), Coimbatore - 641 002,

Ph.: 0422-2541870, Fax: 0422-4366870, Email: [email protected]; [email protected]

DElHi Jindal Centre, 12, Bhikaji Cama Place, New Delhi - 110 066

Ph.: 011-26188345-80, Fax: 011-46032228, Email: [email protected]

FariDabaD Plot No. 26G, NIT Industrial Area, Faridabad - 121 001, Haryana

Ph.: 0129-2232387, 2239248 Fax: 0129-2441735, Email: [email protected]; [email protected]

gHaziabaD 14A, Industrial Area, Buland Shar Road, Ghaziabad - 201 009


guwaHati 106, 3rd Floor, Meer Market, Maszid Lane, Kamarpatty, Guwahati - 781 001

Ph.: 0361-2730054, Email: [email protected]

Grande Palladium, 6th Floor, 175 CST Road, Near Mercedes Showroom, Kalina, Santacruz (E), Mumbai - 400 098. Ph.: 022-61871000, Fax: 61871200/300, Email: [email protected]

HyDErabaD 7th Floor, Surya Towers, 105, Sardar Patel Road, Secunderabad - 500 003


inDOrE 123/124, D. M. Tower, New Palasia, Indore - 452 001


Jaipur 403, Radhika Complex, Loha Mandi, Sansar Chandra Road, Jaipur - 302 001


Kanpur 21 Singh Engineering Compound, Fazal Ganj, Kanpur - 208 003


KOlKata 63, G. T. Road, Liluah, Howrah - 711 204.


luDHiana 109, Modelgram, Ludhiana - 141 002


patna 1, Tilak Nagar East, Behind Patna Diesel, Kankarbagh, Patna - 800 020


punE 1st Floor, T-71-1A/2, Telco Road, MIDC, Bhosari, Pune - 411 026


ruDrapur Plot No. 264, By Pass Road, Village Kishanpur, Kichha, District Udam Singh Nagar, Uttaranchal - 263 148


Notes

SteelJindal Mansion, 5A, Dr. G. Deshmukh Marg, Mumbai - 400 026.

Tel: (022) 23513000 | Fax: (022) 23526400 | Website: www.jsw.in

Rev. 0: Nov. 2011