Product Guide Light Equipment

Product Guide

Light Equipment

Technical data may have country specific deviations.

Table of Contents

1 Tamper 1.1 ca. 60–70 kg (4-Stroke-Benzintampfer) 4 1.2 ca. 80 kg (Dieseltampfer) 6

2 Single Direction Vibratory Plates 2.1 ca. 60–70 kg 8 2.2 ca. 75 kg 10 2.3 ca. 90-110 kg 12 2.4 ca. 110-130 kg 14 2.5 ca. 80-90 kg 16

3 Reversible Vibratory Plates 3.1 ca. 110–120 kg 18 3.2 ca. 130–140 kg 20 3.3 ca. 190–210 kg 22 3.4 ca. 390–460 kg 24 3.5 ca. 570 kg 26 3.6 ca. 715 kg 28 3.7 ca. 740 kg 30

4 Single Drum Vibratory Rollers 4.1 ca. 160 kg 32 4.2 ca. 480 kg 34

5 Hand-guided Double Vibratory Rollers 5.1 mechanical drive ca. 620–950 kg 36 5.2 hydrostatic drive ca. 600–710 kg 38 5.3 hydrostatic drive ca. 1015 kg 40

6 Multi-Purpose Compactor 6.1 ca. 1,5 t (Combination remote control cable/radio) 42 6.2 ca. 1,6 t (Standard with combination remote control cable/radio) 44

7 Technology of application 7.1 Notes on Performance Data 46 7.2 Layer thickness (m)/soil tampering 47 7.3 Productive capacity (m3/h)/ soil tampering 48 7.4 Surface capacity (m2/h)/asphalt tampering 49 7.5 Productive capacity (t/h)/asphalt tampering 50

8 Appendix 8.1 technical terms 51

4

PRE 540 36 001

1 4-Stroke Tamper1.1 BT 60/4, BT 65/4

Fields of application:Earthwork and asphalt construction.

Pipeline, trench and sewer line construction, backfills, foundations and repair work on asphalt.

STAMPFERBT 60/4, BT 65/4

LEISTUNGSDATEN

Gerätetyp Mengenleistung (m3/h)Kies/Sand Mischboden Schluff, Ton

BT 60/4BT 65/4

11-1513-17

8-118-12

6-97-10

Technical Data

Technical Data

Shipping dimensions in m3BT 60/4 0,247

BT 65/4 0,257

Dimensions in mm

BT 60/4BT 65/4

B H L L1 W350350

9601000

735735

335335

280280

Standard

Engine Protection System -Protective engine covering -Two-stage double air filter system -Automatic oil level controlDual fuel filter systemVibration insulated steering bowSelf-cleaning air filter housingProtective coveringSingle point lifting deviceRecoil starterCarrying handlesPlastic castor as loading aidInfinitely variable frequencyEngine shut-down switch integrated in steering handle

Options

Transport deviceTamper foot widths (160-330mm)Tamper foot extensionshour / RPM-meterSpecial paintingTool kitService Kit

WeightsOperating weight CECE 62 68kg ....................................................Basic weight 61 67kg ......................................................................

DimensionsWorking width (tamper plate) 280 280mm ...........................................

Driving CharacteristicsWorking speed max. 20 20m/min ..........................................................Area coverage max. 336 336m2/h ...........................................................

DriveEngine manufacturer Honda Honda .........................................................Type GX 100 GX 100 ...................................................................................Cooling air air ..............................................................................Number of cylinders 1 1 ..........................................................Performance ISO 9249 2,2 2,2kW ......................................................Speed 4.200 4.200min-1 .................................................................................Fuel gasoline gasoline ....................................................................................Drive system mech. mech. ......................................................................

Exciter systemFrequency 10- 11,8 10- 11,8Hz ..........................................................................Impact force 13,5 16,2kN .......................................................................

CapacitiesFuel 3 3l ....................................................................................

BOMAGBT 60/4

BOMAGBT 65/4

Technical modifications reserved. Machines may be shown with options.

PRE 540 36 001 270110 Sa05

BOMAGHellerwaldD-56154 BoppardP.O. Box 5162Tel. (0)6742 - 1000Fax (0)6742 - 3090Fax (0)6742 - 3090

Technical Data

Technical Data


BT 65/4 0,257

Dimensions in mm

BT 60/4BT 65/4

B H L L1 W350350

9601000

735735

335335

280280

Standard


Options








BOMAGBT 60/4

BOMAGBT 65/4


PRE 540 36 001 270110 Sa05


5

Technical Data

Technical Data


BT 65/4 0,257

Dimensions in mm

BT 60/4BT 65/4

B H L L1 W350350

9601000

735735

335335

280280

Standard


Options








BOMAGBT 60/4

BOMAGBT 65/4


PRE 540 36 001 270110 Sa05


6

1 Dieseltamper1.2 BT 80 D

Fields of application:Earthwork and asphalt construction.

Pipeline, trench and sewer line construction, backfills, foundations and repair work on asphalt.

PRE 540 42 001

Technical Data

Technical Data

Shipping dimensions in m3BT 80 D 0,268

Dimensions in mm

BT 80 DB H L L1 W350 1000 765 335 330

Standard

Vibration insulated steering bowSelf-cleaning air filter housingIntegrated fuel filterProtective engine coveringEngine shut-down switch integrated in steering handleInfinitely variable frequencySingle point lifting deviceCarrying handlesPlastic castor as loading aidSemi-automatic decompressionRecoil starter

Options

Transport deviceTamper foot widths (280-290mm)Tool kit

WeightsOperating weight CECE 81kg ................................................................................Basic weight 80kg ...................................................................................................

DimensionsWorking width (tamper plate) 330mm ........................................................................

Driving CharacteristicsWorking speed max. 16m/min ......................................................................................

DriveEngine manufacturer Yanmar ......................................................................................Type L 48 ...............................................................................................................Cooling air ..........................................................................................................Number of cylinders 1 ......................................................................................Performance ISO 9249 3,5kW ...................................................................................Speed 3.600min-1 ..............................................................................................................Fuel diesel ................................................................................................................Drive system mech. ..................................................................................................

Exciter systemFrequency 8- 11,5Hz .......................................................................................................Impact force 17,5kN ...................................................................................................

CapacitiesFuel 3l ................................................................................................................

BOMAGBT 80 D


PRE 540 42 001 270110 Sa05


Technical Data

Technical Data


Dimensions in mm

BT 80 DB H L L1 W350 1000 765 335 330

Standard


Options








BOMAGBT 80 D


PRE 540 42 001 270110 Sa05


STAMPFERBT 80 D

LEISTUNGSDATEN

Gerätetyp Mengenleistung (m3/h)Kies/Sand Mischboden Schluff, Ton

BT 80 D 13-17 8-12 7-10

7

Technical Data

Technical Data


Dimensions in mm

BT 80 DB H L L1 W350 1000 765 335 330

Standard


Options








BOMAGBT 80 D


PRE 540 42 001 270110 Sa05


8

PRE 230 00 001

2 Vibrating Plates non reversible2.1 BP 10/35, BP 12/40

Fields of application:Earthwork, asphalt and paving applications.

Repair work on roads and agricultural roads, pipeline and trench construction, landscape gardening.

VORWÄRTSLAUFENDE VIBRATIONSPLATTENBP 10/35, BP 12/40

LEISTUNGSDATEN

Gerätetyp Mengenleistung (m3/h) bei empfohlenen Schichtdicken im ErdbauKies/Sand Mischboden Schluff, Ton

BP 10/35BP 12/40

10-1511-16

10-1511-16

Gerätetyp Mengenleistung (t/h) bei verschiedenen Asphaltschichtdicken2-4 cm 6-8 cm 10-14 cm

BP 10/35BP 12/40

3-73-7

9-129-12

Technical Data

Technical Data

Shipping dimensions in m3BP 10/35 0,136

BP 12/40 0,167

Dimensions in mm

BP 10/35BP 12/40

H H1 L L1 W658658

962962

10841084

532542

350400

Standard

Vibration insulated steering bow, foldableDetachable steering handleHighly wear resistant base plateAutomatic shutdown at low oil levelRecoil starterFully protected V-beltCarrying handlesSingle point lifting deviceProtective covering

Options

Sprinkler systemTransport wheelsPlastic matTool kitSpecial paintingService KitEngine protection frame (BP12/40)


DimensionsWorking width 350 400mm ...................................................................

Driving CharacteristicsWorking speed, max. 25 25m/min .........................................................Max. gradeability (depending on soil conditions) 30 30% .............

DriveEngine manufacturer Honda Honda .........................................................Type GX 120 GX 120 ...................................................................................Cooling air air ..............................................................................Number of cylinders 1 1 ..........................................................Performance ISO 9249 2,6 2,6kW ......................................................Speed 3.600 3.600min-1 .................................................................................Drive system mech. mech. ......................................................................Fuel gasoline gasoline ....................................................................................

Exciter systemFrequency 90 90Hz ..........................................................................Centrifugal force 10 12kN ................................................................

CapacitiesFuel 2 2l ....................................................................................Water 13,5 13,5l .................................................................................

BOMAGBP 10/35

BOMAGBP 12/40


PRE 230 00 001 270110 Sa01


Technical Data

Technical Data


BP 12/40 0,167

Dimensions in mm

BP 10/35BP 12/40

H H1 L L1 W658658

962962

10841084

532542

350400

Standard


Options








BOMAGBP 10/35

BOMAGBP 12/40


PRE 230 00 001 270110 Sa01


9

Technical Data

Technical Data


BP 12/40 0,167

Dimensions in mm

BP 10/35BP 12/40

H H1 L L1 W658658

962962

10841084

532542

350400

Standard


Options








BOMAGBP 10/35

BOMAGBP 12/40


PRE 230 00 001 270110 Sa01


10

PRE 230 07 001

2 Vibrating Plates non reversible2.2 BP 12/50 A



VORWÄRTSLAUFENDE VIBRATIONSPLATTEBP 12/50 A

LEISTUNGSDATEN


BP 12/50 A 5-10 11-15

Technical Data

Technical Data

Shipping dimensions in m3 without cabin with cabinBP 12/50 A 0,195 0,285

Dimensions in mm

BP 12/50 AH H1 L L1 W658 962 1084 545 500

Standard

Sprinkler systemVibration insulated steering bow, foldableDetachable steering handleHighly wear resistant base plateAutomatic shutdown at low oil levelRecoil starterReinforced centrifugal clutchSingle point lifting deviceFully protected V-beltCarrying handles

Options

Transport wheelsTool kitSpecial paintingService KitSteering handle centre-position


DimensionsWorking width 500mm ...............................................................................................

Driving CharacteristicsWorking speed, max. 22m/min .....................................................................................Max. gradeability (depending on soil conditions) 30% .........................................

DriveEngine manufacturer Honda ......................................................................................Type GX 120 ...............................................................................................................Cooling air ..........................................................................................................Number of cylinders 1 ......................................................................................Performance ISO 9249 2,6kW ...................................................................................Speed 3.600min-1 ..............................................................................................................Drive system mech. ..................................................................................................Fuel gasoline ................................................................................................................

Exciter systemFrequency 90Hz .......................................................................................................Centrifugal force 12kN ............................................................................................

CapacitiesFuel 2l ................................................................................................................Water 13,5l ..............................................................................................................

BOMAGBP 12/50 A


PRE 230 07 001 270110 Sa01


Technical Data

Technical Data


Dimensions in mm

BP 12/50 AH H1 L L1 W658 962 1084 545 500

Standard


Options








BOMAGBP 12/50 A


PRE 230 07 001 270110 Sa01


11

Technical Data

Technical Data


Dimensions in mm

BP 12/50 AH H1 L L1 W658 962 1084 545 500

Standard


Options








BOMAGBP 12/50 A


PRE 230 07 001 270110 Sa01


12

PRE 230 03 001

2 Vibrating Plates non reversible2.3 BP 20/50, BP 25/50



VORWÄRTSLAUFENDE VIBRATIONSPLATTENBP 20/50, BP 25/50

LEISTUNGSDATEN


BP 20/50BP 25/50

13-2315-24

13-2014-21 8-12


BP 20/50BP 25/50

5-107-14

11-1512-18 20-25

Technical Data

Technical Data

Shipping dimensions in m3 without cabin with cabinBP 20/50 0,236 0,345

BP 25/50 0,236 0,345

Dimensions in mm

BP 20/50BP 25/50

H H1 L L1 W658658

962962

10841084

542542

500500

Standard

Vibration insulated steering bow, foldableDetachable steering handleHighly wear resistant base plateAutomatic shutdown at low oil levelRecoil starterEngine protection frameSingle point lifting deviceFully protected V-beltCarrying handlesProtective covering

Options

Sprinkler systemTransport wheelsPlastic matTool kitSpecial paintingService KitSteering handle centre-position






CapacitiesFuel 3,1 3,1l ....................................................................................Water 13,5 13,5l .................................................................................

BOMAGBP 20/50

BOMAGBP 25/50


PRE 230 03 001 270110 Sa01


Technical Data

Technical Data


BP 25/50 0,236 0,345

Dimensions in mm

BP 20/50BP 25/50

H H1 L L1 W658658

962962

10841084

542542

500500

Standard


Options








BOMAGBP 20/50

BOMAGBP 25/50


PRE 230 03 001 270110 Sa01


13

Technical Data

Technical Data


BP 25/50 0,236 0,345

Dimensions in mm

BP 20/50BP 25/50

H H1 L L1 W658658

962962

10841084

542542

500500

Standard


Options








BOMAGBP 20/50

BOMAGBP 25/50


PRE 230 03 001 270110 Sa01


14

PRE 230 04 001

2 Vibrating Plates non reversible2.4 BP 20/50 D, BP 25/50 D



VORWÄRTSLAUFENDE VIBRATIONSPLATTENBP 20/50 D, BP 25/50 D

LEISTUNGSDATEN


BP 20/50 DBP 25/50 D

13-2315-24

13-2014-21

-8-12


BP 20/50 DBP 25/50 D

5-107-14

11-1512-18

-23-28

Technical Data

Technical Data

Shipping dimensions in m3BP 20/50 D 0,245

BP 25/50 D 0,245

Dimensions in mm

BP 20/50 DBP 25/50 D

H H1 L L1 W708708

962962

10841084

542542

500500

Standard

Vibration insulated steering bow, foldableDetachable steering handleHighly wear resistant base plateFully automatic decompressionRecoil starterEngine protection frameSingle point lifting deviceFully protected V-beltCarrying handlesProtective covering

Options

Sprinkler systemTransport wheelsPlastic matSpecial paintingService Kit




DriveEngine manufacturer Hatz Hatz .........................................................Type 1B20 1B20 ...................................................................................Cooling air air ..............................................................................Number of cylinders 1 1 ..........................................................Performance ISO 9249 3,1 3,1kW ......................................................Speed 3.000 3.000min-1 .................................................................................Drive system mech. mech. ......................................................................Fuel diesel diesel ....................................................................................



BOMAGBP 20/50 D

BOMAGBP 25/50 D


PRE 230 04 001 270110 Sa01


Technical Data

Technical Data


BP 25/50 D 0,245

Dimensions in mm

BP 20/50 DBP 25/50 D

H H1 L L1 W708708

962962

10841084

542542

500500

Standard


Options








BOMAGBP 20/50 D

BOMAGBP 25/50 D


PRE 230 04 001 270110 Sa01


15

Technical Data

Technical Data


BP 25/50 D 0,245

Dimensions in mm

BP 20/50 DBP 25/50 D

H H1 L L1 W708708

962962

10841084

542542

500500

Standard


Options








BOMAGBP 20/50 D

BOMAGBP 25/50 D


PRE 230 04 001 270110 Sa01


16

PRE 834 03 001

2 Vorwärtslaufende Vibrationsplatten2.5 BVP 10/36, BVP 18/45



VORWÄRTSLAUFENDE VIBRATIONSPLATTENBVP 10/36, BVP 18/45

LEISTUNGSDATEN


BVP 10/36BVP 18/45

11-1617-23

11-1614-20


BVP 10/36BVP 18/45

4-85-10

10-1311-15

Technical Data

Technical Data

Shipping dimensions in m3 without cabin with cabinBVP 10/36 0,146 0,250

BVP 18/45 0,183 0,313

Dimensions in mm

BVP 10/36BVP 18/45

H H1 L L1 W535535

915915

11151115

558558

360450

Standard

Vibration insulated steering bow, foldableDetachable steering handleHighly wear resistant base plateAutomatic shutdown at low oil levelRecoil starterSingle point lifting deviceFully protected V-beltCarrying handles

Options

Sprinkler systemTransport wheelsPlastic matTool kit






CapacitiesFuel 2,5 3,6l ....................................................................................Water 7 7l .................................................................................

BOMAGBVP 10/36

BOMAGBVP 18/45


PRE 834 03 001 270110 Sa01


Technical Data

Technical Data


BVP 18/45 0,183 0,313

Dimensions in mm

BVP 10/36BVP 18/45

H H1 L L1 W535535

915915

11151115

558558

360450

Standard


Options








BOMAGBVP 10/36

BOMAGBVP 18/45


PRE 834 03 001 270110 Sa01


17

Technical Data

Technical Data


BVP 18/45 0,183 0,313

Dimensions in mm

BVP 10/36BVP 18/45

H H1 L L1 W535535

915915

11151115

558558

360450

Standard


Options








BOMAGBVP 10/36

BOMAGBVP 18/45


PRE 834 03 001 270110 Sa01


18

PRE 690 46 001

3 Reversible Vibratory Plates3.1 BPR 25/40, BPR 25/50


Construction of roads, forestry roads and railtracks, backfills, trench and sewer line construction, landscape gardening, interlocking paving stones, foundations.

REVERSIERBARE VIBRATIONSPLATTENBPR 25/40, BPR 25/50

LEISTUNGSDATEN

Gerätetyp Mengenleistung (m3/h) bei empfohlenen Schichtdicken im ErdbauFelsgestein Kies/Sand Mischboden Schluff, Ton

BPR 25/40BPR 25/50

--

15-2415-24

13-2013-20

8-128-12

Technical Data

Technical Data

Shipping dimensions in m3BPR 25/40 0,385

BPR 25/50 0,482

Dimensions in mm

BPR 25/40BPR 25/50

H H1 L L1 W660660

870870

14601460

650650

400500

Standard

Engine protection frameSingle lever controlLow vibration steering rodHeight adjustable steering rodSteering rod lockable in transport and working positionVibration and throttle regulation on the steering rodHighly wear resistant base plateFully protected V-beltRecoil starterBack-up drive protectionAutomatic shutdown at low oil level

Options

Sprinkler systemTool kitSpecial paintingPlastic matTransport wheelsService Kit

WeightsOperating weight CECE (W) 111 120kg ............................................Basic weight 108 117kg ......................................................................

DimensionsBasic working width 400 500mm ..........................................................Lowest passing height 660 660mm .......................................................




CapacitiesFuel 3 3l ....................................................................................Water 12 12l .................................................................................

BOMAGBPR 25/40

BOMAGBPR 25/50


PRE 690 46 001 270110 Sa03


Technical Data

Technical Data


BPR 25/50 0,482

Dimensions in mm

BPR 25/40BPR 25/50

H H1 L L1 W660660

870870

14601460

650650

400500

Standard


Options








BOMAGBPR 25/40

BOMAGBPR 25/50


PRE 690 46 001 270110 Sa03


19

Technical Data

Technical Data


BPR 25/50 0,482

Dimensions in mm

BPR 25/40BPR 25/50

H H1 L L1 W660660

870870

14601460

650650

400500

Standard


Options








BOMAGBPR 25/40

BOMAGBPR 25/50


PRE 690 46 001 270110 Sa03


20

PRE 690 48 001

3 Reversible Vibratory Plates3.2 BPR 25/40 D, BPR 25/50 D



Technical Data

Technical Data

Shipping dimensions in m3BPR 25/40 D 0,432

BPR 25/50 D 0,540

Dimensions in mm

BPR 25/40 DBPR 25/50 D

H H1 L L1 W740740

870870

14601460

650650

400500

Standard

Engine protection frameSingle lever controlLow vibration steering rodHeight adjustable steering rodSteering rod lockable in transport and working positionVibration and throttle regulation on the steering rodHighly wear resistant base plateFully protected V-beltAutomatic decompressionRecoil starterBack-up drive protectionAutomatic shutdown at low oil level

Options

Sprinkler systemTransport wheelsTool kitSpecial paintingPlastic matService Kit







BOMAGBPR 25/40 D

BOMAGBPR 25/50 D


PRE 690 48 001 270110 Sa03


Technical Data

Technical Data


BPR 25/50 D 0,540

Dimensions in mm

BPR 25/40 DBPR 25/50 D

H H1 L L1 W740740

870870

14601460

650650

400500

Standard


Options








BOMAGBPR 25/40 D

BOMAGBPR 25/50 D


PRE 690 48 001 270110 Sa03


REVERSIERBARE VIBRATIONSPLATTENBPR 25/40 D, BPR 25/50 D

LEISTUNGSDATEN


BPR 25/40 DBPR 25/50 D

--

15-2415-24

13-2013-20

8-128-12

21

Technical Data

Technical Data


BPR 25/50 D 0,540

Dimensions in mm

BPR 25/40 DBPR 25/50 D

H H1 L L1 W740740

870870

14601460

650650

400500

Standard


Options








BOMAGBPR 25/40 D

BOMAGBPR 25/50 D


PRE 690 48 001 270110 Sa03


22

PRE 690 41 001

3 Reversible Vibratory Plates3.3 BPR 35/42 D, BPR 35/60, BPR 35/60 D



REVERSIERBARE VIBRATIONSPLATTENBPR 35/42 D, BPR 35/60, BPR 35/60 D

LEISTUNGSDATEN


BPR 35/42 DBPR 35/60BPR 35/60 D

---

21-3021-3021-30

17-2417-2417-24

10-1510-1510-15

Technical Data

Technical Data


BPR 35/60 0,586BPR 35/60 D 0,623

Dimensions in mm

BPR 35/42 DBPR 35/60

BPR 35/60 D

H H1 L L1 W688647

688

820820

820

15101510

1510

762762

762

420600

600

Standard

Engine protection frameSingle lever controlHeight adjustable steering rodLow vibration steering rodSteering rod lockable in transport and working positionVibration and throttle regulation on the steering rodHighly wear resistant base plateFully protected V-beltAutomatic shutdown at low oil level (BPR35/60)Automatic decompression (BPR35/42D, BPR35/60D)Recoil starterBack-up drive protectionAutomatic shutdown at low oil level

Options

Fully closed engine protection hood made of high-strength steel (+15 kg)Transport wheelsElectric starter (+21 kg)Tool kitSpecial paintingHour meter (El.-starter)Plastic matService Kit

WeightsOperating weight CECE (W) 190 180 205kg ...................Basic weight 187 177 202kg .............................................

DimensionsBasic working width 420 600 600mm ................................Lowest passing height 688 647 688mm ..............................

Driving CharacteristicsWorking speed, max. 27 27 27m/min ...............................Max. gradeability (depending on soil conditions) 32 32 32% ................................................

DriveEngine manufacturer Hatz Honda Hatz ................................Type 1B20 GX 160 1B20 .........................................................Cooling air air air .....................................................Number of cylinders 1 1 1 ................................Performance ISO 9249 3,1 3,6 3,1kW .............................Speed 3.000 3.600 3.000min-1 ........................................................Drive system mech. mech. mech. ............................................Fuel diesel gasoline diesel ..........................................................

Exciter systemFrequency 80 80 80Hz .................................................Centrifugal force 35 35 35kN ......................................

CapacitiesFuel 3 3,6 3l ..........................................................

BOMAGBPR 35/42 D

BOMAGBPR 35/60

BOMAGBPR 35/60 D


PRE 690 41 001 270110 Sa03


Technical Data

Technical Data


BPR 35/60 0,586BPR 35/60 D 0,623

Dimensions in mm

BPR 35/42 DBPR 35/60

BPR 35/60 D

H H1 L L1 W688647

688

820820

820

15101510

1510

762762

762

420600

600

Standard


Options








BOMAGBPR 35/42 D

BOMAGBPR 35/60

BOMAGBPR 35/60 D


PRE 690 41 001 270110 Sa03


23

Technical Data

Technical Data


BPR 35/60 0,586BPR 35/60 D 0,623

Dimensions in mm

BPR 35/42 DBPR 35/60

BPR 35/60 D

H H1 L L1 W688647

688

820820

820

15101510

1510

762762

762

420600

600

Standard


Options








BOMAGBPR 35/42 D

BOMAGBPR 35/60

BOMAGBPR 35/60 D


PRE 690 41 001 270110 Sa03


24

PRE 690 34 001

3 Reversible Vibratory Plates3.4 BPR 45/55 D, BPR 55/65 D

Fields of application:Earthwork and paving applications.

Construction of roads, forestry roads and railtracks, backfills, trench and sewer line construction, landscape gardening, foundations.

REVERSIERBARE VIBRATIONSPLATTENBPR 45/55 D, BPR 55/65 D

LEISTUNGSDATEN


BPR 45/55 DBPR 55/65 D

--

30-4041-55

25-3436-48

21-2826-35

Technical Data

Technical Data


BPR 55/65 D 0,873

Dimensions in mm

BPR 45/55 DBPR 55/65 D

H H1 L L1 W W1 W2790790

800800

17001700

900900

450450

550650

750750

Standard

Engine protection hoodSingle lever controlLow vibration steering rodHeight adjustable steering rodSteering rod lockable in transport and working positionVibration and throttle regulation on the steering rodHighly wear resistant base plateAutomatic decompressionMulti-functional, foldable single-point lifting facilityWear stripsElectric starterRecoil starterBack-up drive protectionAutomatic shutdown at low oil level

Options

ECONOMIZERTool kitSpecial paintingHour meterPlastic matExtension plates (550-750mm)Service Kit

WeightsOperating weight CECE (W) 381 436kg ............................................Operating weight CECE (W1) 396 456kg ..........................................Operating weight CECE (W2) 412 467kg ..........................................Basic weight 391 451kg ......................................................................

DimensionsBasic working width 550 650mm ..........................................................Working width without extension bars (W) 450 450mm ......................Lowest passing height 790 790mm .......................................................


DriveEngine manufacturer Lombardini Lombardini .........................................................Type 15 LD 440 15 LD 440 ...................................................................................Cooling air air ..............................................................................Number of cylinders 1 1 ..........................................................Performance ISO 9249 6,6 6,6kW ......................................................Speed 3.000 3.000min-1 .................................................................................Drive system mech. mech. ......................................................................Fuel diesel diesel ....................................................................................



BOMAGBPR 45/55 D

BOMAGBPR 55/65 D


PRE 690 34 001 270110 Sa05


Technical Data

Technical Data


BPR 55/65 D 0,873

Dimensions in mm

BPR 45/55 DBPR 55/65 D

H H1 L L1 W W1 W2790790

800800

17001700

900900

450450

550650

750750

Standard


Options








BOMAGBPR 45/55 D

BOMAGBPR 55/65 D


PRE 690 34 001 270110 Sa05


25

Technical Data

Technical Data


BPR 55/65 D 0,873

Dimensions in mm

BPR 45/55 DBPR 55/65 D

H H1 L L1 W W1 W2790790

800800

17001700

900900

450450

550650

750750

Standard


Options








BOMAGBPR 45/55 D

BOMAGBPR 55/65 D


PRE 690 34 001 270110 Sa05


26

PRE 690 36 001

3 Reversible Vibratory Plates 3.5 BPR 70/70 D



REVERSIERBARE VIBRATIONSPLATTENBPR 70/70 D

LEISTUNGSDATEN


BPR70/70 D 39-52 50-66 39-52 33-44

Technical Data

Technical Data


Dimensions in mm

BPR 70/70 DH H1 L L1 W W1 W2870 1030 1860 980 550 700 850

Standard

Engine protection hoodElectric starterTip-ControlBack-up drive protectionLow vibration steering rodHeight adjustable steering rodSteering rod lockable in transport and working positionVibration and throttle regulation on the steering rodHighly wear resistant base plateAutomatic shutdown at low oil levelSafety crank-handle for emergency startingMulti-functional, foldable single-point lifting facilityWear strips

Options

ECONOMIZERTool kitSpecial paintingHour meterPlastic matExtension plates (850mm)Service KitEnvironmentally compliant hydraulic oil

WeightsOperating weight CECE (W) 556kg .........................................................................Operating weight CECE (W1) 579kg .......................................................................Operating weight CECE (W2) 595kg .......................................................................Basic weight 570kg ...................................................................................................

DimensionsBasic working width 700mm ......................................................................................Working width without extension bars (W) 550mm ..................................................Lowest passing height 870mm ....................................................................................


DriveEngine manufacturer Hatz ......................................................................................Type 1D 81 ...............................................................................................................Cooling air ..........................................................................................................Number of cylinders 1 ......................................................................................Performance ISO 9249 9,8kW ...................................................................................Speed 2.700min-1 ..............................................................................................................Drive system mech. ..................................................................................................Fuel diesel ................................................................................................................



BOMAGBPR 70/70 D


PRE 690 36 001 270110 Sa06


Technical Data

Technical Data


Dimensions in mm

BPR 70/70 DH H1 L L1 W W1 W2870 1030 1860 980 550 700 850

Standard


Options








BOMAGBPR 70/70 D


PRE 690 36 001 270110 Sa06


27

Technical Data

Technical Data


Dimensions in mm

BPR 70/70 DH H1 L L1 W W1 W2870 1030 1860 980 550 700 850

Standard


Options








BOMAGBPR 70/70 D


PRE 690 36 001 270110 Sa06


28

PRE 690 35 001

3 Reversible Vibratory Plates3.6 BPR 100/80 D



REVERSIERBARE VIBRATIONSPLATTEBPR 100/80 D

LEISTUNGSDATEN


BPR 100/80 D 70-110 90-120 60-90 25-40

Technical Data

Technical Data


Dimensions in mm

BPR 100/80 DH H1 L L1 W W1 W2910 1080 1890 980 650 800 950

Standard

Engine protection hoodElectric starterTip-ControlLow vibration steering rodHeight adjustable steering rodSteering rod lockable in transport and working positionVibration and throttle regulation on the steering rodBack-up drive protectionHighly wear resistant base plateAutomatic shutdown at low oil levelSafety crank-handle for emergency startingMulti-functional, foldable single-point lifting facilityWear strips

Options

ECONOMIZERTool kitSpecial paintingHour meterExtension plates (950mm)Service KitEnvironmentally compliant hydraulic oil




DriveEngine manufacturer Hatz ......................................................................................Type 1D 90 ...............................................................................................................Cooling air ..........................................................................................................Number of cylinders 1 ......................................................................................Performance ISO 9249 11kW ...................................................................................Speed 2.600min-1 ..............................................................................................................Drive system mech. ..................................................................................................Fuel diesel ................................................................................................................



BOMAGBPR 100/80 D


PRE 690 35 001 270110 Sa02


Technical Data

Technical Data


Dimensions in mm

BPR 100/80 DH H1 L L1 W W1 W2910 1080 1890 980 650 800 950

Standard


Options








BOMAGBPR 100/80 D


PRE 690 35 001 270110 Sa02


29

Technical Data

Technical Data


Dimensions in mm

BPR 100/80 DH H1 L L1 W W1 W2910 1080 1890 980 650 800 950

Standard


Options








BOMAGBPR 100/80 D


PRE 690 35 001 270110 Sa02


30

PRE 700 00 001

3 Reversible Vibratory Plates3.7 BPH 80/65 S

Fields of application:Earthwork.


REVERSIERBARE VIBRATIONSPLATTENBPH 80/65 S

LEISTUNGSDATEN

Gerätetyp Mengenleistung (m3/h) bei empfohlenen Schichtdicken im ErdbauFelsgestein Kies/Sand Mischboden

BPH 80/65 S 80-120 95-130 65-95

Technical Data

Technical Data

Shipping dimensions in m3BPH 80/65 S 0,678

Dimensions in mm

BPH 80/65 SH L L1 W W1 W2785 1080 1088 650 800 950

Standard

Hydrostatic driveCable remote controlElectric starterEngine protection hoodHighly wear resistant base plateAutomatic shutdown at low oil levelLockable engine cover and dash boardSingle point lifting device , foldableWear stripsBattery disconnect switchEasy Service Concept -Diagnostic module with fault code display -Hour meter -foldable full protection hood

Options

Extension plates 950mmSpecial paintingCombination remote control cable/radioMobile quick chargerService KitTool kit


DimensionsBasic working width 800mm ......................................................................................Lowest passing height 785mm ....................................................................................


DriveEngine manufacturer Hatz ......................................................................................Type 1D 90 ...............................................................................................................Cooling air ..........................................................................................................Number of cylinders 1 ......................................................................................Performance ISO 9249 11,5kW ...................................................................................Speed 3.000min-1 ..............................................................................................................Drive system hydraulic ..................................................................................................Fuel diesel ................................................................................................................

Exciter systemFrequency 55Hz .......................................................................................................Centrifugal force 80kN ............................................................................................Drive system hydraulic ..................................................................................................

CapacitiesFuel 10l ................................................................................................................Hydraulic 25l .......................................................................................................

BOMAGBPH 80/65 S


PRE 700 00 001 270110 Sa06


Technical Data

Technical Data


Dimensions in mm

BPH 80/65 SH L L1 W W1 W2785 1080 1088 650 800 950

Standard


Options








BOMAGBPH 80/65 S


PRE 700 00 001 270110 Sa06


31

Technical Data

Technical Data


Dimensions in mm

BPH 80/65 SH L L1 W W1 W2785 1080 1088 650 800 950

Standard


Options








BOMAGBPH 80/65 S


PRE 700 00 001 270110 Sa06


32

PRE 620 02 001

4 Single Drum Vibratory Roller4.1 BW 55 E

Fields of application:Earthwork and asphalt applications.

New construction and repairs of sidewalks, hard shoulders, cycle paths, yards and drive ways, children playgrounds, tennis and sports grounds as well as agricultural and forestry road construction.

EINRADWALZENBW 55 E

LEISTUNGSDATEN


BW 55 E 15-23 15-23


BW 55 E 4-8 6-10

Technical Data

Technical Data

Shipping dimensions in m3BW 55 E 0,671

Dimensions in mm

BW 55 EB C1 C2 D H L O1 O2 S W678 125 330 400 900 1100 100 18 5 560

Standard

Sprinkler systemVibration dampened steering rodHeight adjustable steering rodVibration and throttle regulation on the steering rodScrapers front and rearAutomatic shutdown at low oil levelSingle point lifting deviceSafety controlBack-up drive protectionSupport bars front and rear

Options

Tool kitSpecial painting

WeightsOperating weight CECE 161kg ................................................................................Basic weight 151kg ...................................................................................................Static linear load CECE 2,9kg/cm .................................................................................


Driving CharacteristicsSpeed (1), forward 0- 1,1km/h .........................................................................................Speed (1), reverse 0- 1,1km/h ..........................................................................................Speed (2), forward 0- 1,6km/h .........................................................................................Speed (2), reverse 0- 1,6km/h ..........................................................................................Max. gradeability without/with vibr. 25/20% .............................................................

DriveEngine manufacturer Honda ......................................................................................Type GX 120 ...............................................................................................................Cooling air ..........................................................................................................Number of cylinders 1 ......................................................................................Performance ISO 9249 2,2kW ...................................................................................Speed 2.750min-1 ..............................................................................................................Fuel gasoline ................................................................................................................Starting device Recoil starter ...............................................................................................Drive system mech. ..................................................................................................

Exciter systemDrive system mech. ..................................................................................................Frequency 77Hz .......................................................................................................Amplitude 0,50mm ......................................................................................................Centrifugal force 10kN ............................................................................................

Sprinkler SystemType of sprinkling gravity ..........................................................................................

CapacitiesFuel 2,5l ................................................................................................................Water 16l ..............................................................................................................

BOMAGBW 55 E


PRE 620 02 001 270110 Sa04


Technical Data

Technical Data


Dimensions in mm

BW 55 EB C1 C2 D H L O1 O2 S W678 125 330 400 900 1100 100 18 5 560

Standard


Options









BOMAGBW 55 E


PRE 620 02 001 270110 Sa04


33

Technical Data

Technical Data


Dimensions in mm

BW 55 EB C1 C2 D H L O1 O2 S W678 125 330 400 900 1100 100 18 5 560

Standard


Options









BOMAGBW 55 E


PRE 620 02 001 270110 Sa04


EINRADWALZENBW 71 E-2

LEISTUNGSDATEN


BW 71 E-2 35-55 35-55 21-32


BW 71 E-2 8-15 12-20 20-35

34

PRE 620 23 001

4 Single Drum Vibratory Roller4.2 BW 71 E-2



Technical Data

Technical Data

Shipping dimensions in m3BW 71 E-2 2,260

Dimensions in mm

BW 71 E-2B C1 C2 D H L O1 O2 S W825 190 450 600 1245 2200 115 25 8 710

Standard

Hydrostatic driveSprinkler systemElectric starterVibration dampened steering rodHeight adjustable steering rodVibration and throttle regulation on the steering rodScrapers front and rearProtective engine coveringSingle point lifting deviceSafety controlBack-up drive protectionSupport bars front and rearAutomatic shutdown at low oil level

Options

Support wheel+Parking brakeTool kitSpecial painting

WeightsOperating weight CECE 488kg ................................................................................Basic weight 471kg ...................................................................................................Static linear load CECE 7kg/cm .................................................................................



DriveEngine manufacturer Hatz ......................................................................................Type 1B 20 ...............................................................................................................Cooling air ..........................................................................................................Number of cylinders 1 ......................................................................................Performance ISO 9249 3,4kW ...................................................................................Speed 3.200min-1 ..............................................................................................................Fuel diesel ................................................................................................................Starting device El.-starter ...............................................................................................Drive system hydrost. ..................................................................................................




BOMAGBW 71 E-2


PRE 620 23 001 270110 Sa03


Technical Data

Technical Data


Dimensions in mm

BW 71 E-2B C1 C2 D H L O1 O2 S W825 190 450 600 1245 2200 115 25 8 710

Standard


Options









BOMAGBW 71 E-2


PRE 620 23 001 270110 Sa03


35

Technical Data

Technical Data


Dimensions in mm

BW 71 E-2B C1 C2 D H L O1 O2 S W825 190 450 600 1245 2200 115 25 8 710

Standard


Options









BOMAGBW 71 E-2


PRE 620 23 001 270110 Sa03


36

PRE 100 00 001

5 Walk-Behind Double Drum Vibratory Rollers – mechanical drive –5.1 BW 65 S-2, BW 75 S-2

Fields of application:New construction and repairs of sidewalks, hard shoulders, walk and cycle paths, yards and drive ways, children playgrounds, tennis and sports grounds as well as agricultural and forestry road construction.

HANDGEFÜHRTE DOPPELVIBRATIONSWALZENBW 65 S-2, BW 75 S-2

LEISTUNGSDATEN


BW 65 S-2BW 75 S-2

30-4540-55

30-4540-55

15-2220-35


BW 65 S-2BW 75 S-2

12-2314-26

23-3126-36

39-5545-63

Technical Data

Technical Data

Shipping dimensions in m3BW 65 S-2 1,778

BW 75 S-2 3,010

Dimensions in mm

BW 65 S-2BW 75 S-2

A B C D H K L L1 O S W520600

780895

200230

400480

10601180

140110

21502850

22402945

2525

810

650750

Standard

Mechanical vibration driveDouble vibrationSprinkler systemVibration dampened steering rodHeight adjustable steering rodVibration and throttle regulation on the steering rod2 scrapers per drumAutomatic shutdown at low oil levelSingle point lifting deviceSafety crank handle* Safety control* Back-up drive protection* Parking brake

Options

Parking brakeHourmeterTool kitSpecial painting

* Standard delivery with CE conformity (valid within European Union)#72

WeightsOperating weight CECE 626 943kg ....................................................Basic weight 600 910kg ......................................................................Average axle load CECE 313 472kg ...................................................Average static linear load CECE 4,8 6,3kg/cm .......................................


Driving CharacteristicsSpeed (1), forward 1,9 1,6km/h .............................................................Speed (1), reverse 1,9 1,6km/h ..............................................................Speed (2), forward 2,5 2,5km/h .............................................................Speed (2), reverse 2,5 2,5km/h ..............................................................Max. gradeability without/with vibr. 40/35 40/35% .................................

DriveEngine manufacturer Hatz Hatz .........................................................Type 1D 41 1D 50 ...................................................................................Cooling air air ..............................................................................Number of cylinders 1 1 ..........................................................Performance ISO 9249 4,4 6,8kW ......................................................Speed 2.300 2.700min-1 .................................................................................Fuel diesel diesel ....................................................................................Drive system mech. mech. ......................................................................Driven drum front + rear front + rear ......................................................................

BrakesService brake mech. mech. .....................................................................Parking brake mech. mech. .....................................................................

Exciter systemVibrating drum front + rear front + rear ..................................................................Drive system mech. mech. ......................................................................Frequency 58 55Hz ..........................................................................Amplitude 0,42 0,49mm ..........................................................................Centrifugal force 24 40kN ................................................................

Sprinkler SystemType of sprinkling gravity gravity .............................................................


BOMAGBW 65 S-2

BOMAGBW 75 S-2


PRE 100 00 001 270110 Sa06


Technical Data

Technical Data


BW 75 S-2 3,010

Dimensions in mm

BW 65 S-2BW 75 S-2

A B C D H K L L1 O S W520600

780895

200230

400480

10601180

140110

21502850

22402945

2525

810

650750

Standard


Options











BOMAGBW 65 S-2

BOMAGBW 75 S-2


PRE 100 00 001 270110 Sa06


37

Technical Data

Technical Data


BW 75 S-2 3,010

Dimensions in mm

BW 65 S-2BW 75 S-2

A B C D H K L L1 O S W520600

780895

200230

400480

10601180

140110

21502850

22402945

2525

810

650750

Standard


Options











BOMAGBW 65 S-2

BOMAGBW 75 S-2


PRE 100 00 001 270110 Sa06


38

5 Walk-Behind Double Drum Vibratory Rollers – hydrostatic drive –5.2 BW 62 H, BW 65 H



HANDGEFÜHRTE DOPPELVIBRATIONSWALZENBW 62 H, BW 65 H

LEISTUNGSDATEN


BW 62 HBW 65 H

29-4230-45

28-4230-45

15-2215-22


BW 62 HBW 65 H

11-2112-23

21-2823-31

35-4539-55

PRE 100 60 001

Technical Data

Technical Data

Shipping dimensions in m3BW 62 H 1,504

BW 65 H 1,609

Dimensions in mm

BW 62 HBW 65 H

A B C D H H1 K L L1 O S W550550

712762

200200

400400

960960

12101210

110110

22002200

23202320

2020

88

600650

Standard

Hydrostatic driveDouble vibrationMechanical vibration driveInfinitely variable speed controlSprinkler systemVibration dampened steering rodHeight adjustable steering rodVibration and throttle regulation on the steering rod2 scrapers per drumAutomatic shutdown at low oil levelSingle point lifting deviceSafety crank handle* Safety control* Back-up drive protection* Parking brake

Options

Electric starter (+ 36 kg)Parking brakeEnvironmentally compliant hydraulic oilTool kitSpecial painting


WeightsOperating weight CECE 602 707kg ....................................................Basic weight 570 675kg ......................................................................Average axle load CECE 301 354kg ...................................................Average static linear load CECE 5 5,4kg/cm .......................................


Driving CharacteristicsSpeed (1), forward 0- 5,5 0- 5,5km/h .............................................................Speed (1), reverse 0- 2,5 0- 2,5km/h ..............................................................Max. gradeability without/with vibr. 40/35 40/35% .................................

DriveEngine manufacturer Hatz Hatz .........................................................Type 1D 41 1D 41 ...................................................................................Cooling air air ..............................................................................Number of cylinders 1 1 ..........................................................Performance ISO 9249 5,3 5,3kW ......................................................Speed 2.800 2.800min-1 .................................................................................Fuel diesel diesel ....................................................................................Drive system hydrost. hydrost. ......................................................................Driven drum front + rear front + rear ......................................................................

BrakesService brake hydrost. hydrost. .....................................................................Parking brake standard standard .....................................................................




BOMAGBW 62 H

BOMAGBW 65 H


PRE 100 60 001 270110 Sa05


Technical Data

Technical Data


BW 65 H 1,609

Dimensions in mm

BW 62 HBW 65 H

A B C D H H1 K L L1 O S W550550

712762

200200

400400

960960

12101210

110110

22002200

23202320

2020

88

600650

Standard


Options











BOMAGBW 62 H

BOMAGBW 65 H


PRE 100 60 001 270110 Sa05


39

Technical Data

Technical Data


BW 65 H 1,609

Dimensions in mm

BW 62 HBW 65 H

A B C D H H1 K L L1 O S W550550

712762

200200

400400

960960

12101210

110110

22002200

23202320

2020

88

600650

Standard


Options











BOMAGBW 62 H

BOMAGBW 65 H


PRE 100 60 001 270110 Sa05


40

PRE 100 81 001

5 Walk-behind Double Drum Vibratory Roller – hydrostatic drive –5.3 BW 75 H

Fields of application:Earthwork and asphalt applications. New construction and repairs of sidewalks, hard shoulders, cycle paths, yards and drive ways, children playgrounds, tennis and sports grounds as well as agricultural and forestry road construction.

HANDGEFÜHRTE DOPPELVIBRATIONSWALZEBW 75 H

LEISTUNGSDATEN


BW 75 H 40-55 40-55 20-35


BW 75 H 14-26 26-36 45-63

Technical Data

Technical Data


Dimensions in mm

BW 75 HA B C D H H1 K L L1 O S W620 865 250 500 1100 1159 128 2910 3010 20 10 750

Standard

Hydrostatic driveDouble vibrationMechanical vibration driveInfinitely variable speed controlSprinkler systemElectric starterVibration dampened steering rodHeight adjustable steering rodVibration and throttle regulation on the steering rod2 scrapers per drumSingle point lifting deviceRecoil starter as emergency starter* Safety control* Back-up drive protection* Parking brake

Options

Parking brakeEnvironmentally compliant hydraulic oilTool kitSpecial painting


WeightsOperating weight CECE 1.015kg ................................................................................Basic weight 985kg ...................................................................................................Average axle load CECE 508kg ...............................................................................Average static linear load CECE 6,8kg/cm ...................................................................


Driving CharacteristicsSpeed (1), forward 0- 5,0km/h .........................................................................................Speed (1), reverse 0- 2,5km/h ..........................................................................................Max. gradeability without/with vibr. 40/35% .............................................................

DriveEngine manufacturer Yanmar ......................................................................................Type L100 ...............................................................................................................Cooling air ..........................................................................................................Number of cylinders ......................................................................................Performance ISO 9249 / DIN 6270 B 6,2kW ............................................................Speed 3.100min-1 ..............................................................................................................Fuel diesel ................................................................................................................Drive system hydrost. ..................................................................................................Driven drum front + rear ...................................................................................................

BrakesService brake hydrost. ..................................................................................................Parking brake mech. .................................................................................................

Exciter systemVibrating drum front + rear ...............................................................................................Drive system mech. ..................................................................................................Frequency 55Hz .......................................................................................................Amplitude 0,50mm ......................................................................................................Centrifugal force 40kN ............................................................................................



BOMAGBW 75 H


PRE 100 81 001 270110 Sa04


Technical Data

Technical Data


Dimensions in mm


Standard


Options











BOMAGBW 75 H


PRE 100 81 001 270110 Sa04


41

Technical Data

Technical Data


Dimensions in mm


Standard


Options











BOMAGBW 75 H


PRE 100 81 001 270110 Sa04


42

PRE 720 03 001

6 Multi Purpose Compactor6.1 BMP 851


Trench and sewer line construction, backfills and foundation work – wherever high demands are placed on mobility, manoeuvrability and simple operation under severe soil conditions.

MEHRZWECK-VERDICHTERBMP 851

LEISTUNGSDATEN


BMP 851 52-82 52-82 30-40

Technical Data

Technical Data

Shipping dimensions in m3BMP 851 1,795

Dimensions in mm

BMP 851A D H K L S W820 500 1200 240 1760 25 850

Standard

All-drum-driveSkid steeringCable remote controlCentral exciterAutom. or manual changing of vibrator shaft rotationTwo travel speed rangesIntelligent Vibration Control (IVC)Electric starterHydrost. sevice brakeHydro-mechanical parking brakeBack-up drive protection2 scrapers per drumBattery disconnect switchAutomatic shutdown at low oil levelAutomatic engine shut down at a lateral tipping angle of > 45°Fully closed engine protection hood made of high-strength steelSingle point lifting device, foldableLockable engine cover and dash boardEasy Service Concept -Diagnostic module with fault code display -Hour meter -foldable full protection hood

OptionsDrum extensions (610/850mm)(+156kg)Combination remote control cable/radioEnvironmentally compliant hydraulic oilSpecial paintingMobile quick charger

WeightsOperating weight CECE 1.548kg ................................................................................Basic weight 1.540kg ...................................................................................................Average axle load CECE 774kg ...............................................................................

DimensionsBasic working width 850mm ......................................................................................

Driving CharacteristicsSpeed (1), forward 1,2km/h .........................................................................................Speed (1), reverse 1,2km/h ..........................................................................................Speed (2), forward 2,7km/h .........................................................................................Speed (2), reverse 2,7km/h ..........................................................................................Max. gradeability without/with vibr. 55/45% .............................................................

DriveEngine manufacturer Hatz ......................................................................................Type 2G 40 ...............................................................................................................Cooling air ..........................................................................................................Number of cylinders 2 ......................................................................................Performance ISO 9249 13,8kW ...................................................................................Speed 2.800min-1 ..............................................................................................................Fuel diesel ................................................................................................................Drive system hydrost. ..................................................................................................Driven drum 4 ...................................................................................................

BrakesService brake hydrost. ..................................................................................................Parking brake hydromec. .................................................................................................

Exciter systemVibrating drum Central exciter ...............................................................................................Drive system hydraulic ..................................................................................................Frequency 32Hz .......................................................................................................Amplitude 2,10mm ......................................................................................................Centrifugal force 80kN ............................................................................................


BOMAGBMP 851


PRE 720 03 001 270110 Sa09


Technical Data

Technical Data


Dimensions in mm

BMP 851A D H K L S W820 500 1200 240 1760 25 850

Standard










BOMAGBMP 851


PRE 720 03 001 270110 Sa09


43

Technical Data

Technical Data


Dimensions in mm

BMP 851A D H K L S W820 500 1200 240 1760 25 850

Standard










BOMAGBMP 851


PRE 720 03 001 270110 Sa09


44

PRE 720 11 001

6 Multi Purpose Compactor6.2 BMP 8500


Trench and sewer line construction, backfills and foundation work – wherever high demands are placed on mobility, manoeuvrability and simple operation under severe soil conditions.


LEISTUNGSDATEN


BMP 851 52-82 52-82 30-40


LEISTUNGSDATEN


BMP 8500 52-82 52-82 30-40

Technical Data

Technical Data


Dimensions in mm

BMP 8500A D H K L S W W11000 520 1275 222 1897 25 850 610

Standard

ECOMODEHydrostatic articulated steering, maintenance freeCombination remote control cable/radioDual directed-vibration systemTwo travel speed ranges2 amplitudesIntelligent Vibration Control (IVC)Electric starterHydrost. sevice brakeHydro-mechanical parking brakeBack-up drive protection2 scrapers per drumBattery disconnect switchAutomatic shutdown at low oil levelAutomatic engine shut down at a lateral tipping angle of > 45°Full prot. hoods made of impact resistant compound materialSingle point lifting deviceLockable engine cover and dash boardEasy Service Concept -Diagnostic module with fault code display -Hour meter -foldable full protection hood

OptionsDrum extensions (610/850mm)(+48kg)Environmentally compliant hydraulic oilSpecial paintingMobile quick charger




DriveEngine manufacturer Kubota ......................................................................................Type D 1005 ...............................................................................................................Cooling water ..........................................................................................................Number of cylinders 3 ......................................................................................Performance ISO 9249 14,5kW ...................................................................................Speed 2.600min-1 ..............................................................................................................Fuel diesel ................................................................................................................Drive system hydrost. ..................................................................................................Driven drum front + rear ...................................................................................................


Exciter systemVibrating drum front + rear ...............................................................................................Drive system hydraulic ..................................................................................................Frequency 42Hz .......................................................................................................Amplitude 1,12/0,56mm ......................................................................................................Centrifugal force 72/36kN ............................................................................................


BOMAGBMP 8500


PRE 720 11 001 270110 Sa01


Technical Data

Technical Data


Dimensions in mm

BMP 8500A D H K L S W W11000 520 1275 222 1897 25 850 610

Standard










BOMAGBMP 8500


PRE 720 11 001 270110 Sa01


45

Technical Data

Technical Data


Dimensions in mm

BMP 8500A D H K L S W W11000 520 1275 222 1897 25 850 610

Standard










BOMAGBMP 8500


PRE 720 11 001 270110 Sa01


46

7.1 Notes on Performance Data

Soil compactionFor the determination of the performance in earthwork the lift height of the compacted material is of utmost impor-tance. The processed lift height depends mainly on soil type, compaction requirements and the compaction equipment used for the job. The reference values in the following tables are the results of compaction trials and practical applications. Under normal application related conditi-ons the required compaction values are thereby reached after four to eight passes.

The tables contain information on the volumetric output of the compaction equipment in earthwork.

Asphalt compactionIn asphalt compaction the number of required passes may vary extremely. It mainly depends on the compactibility of the mixture, the pre-compaction by the paver, the mixture temperature during compaction, the layer thickness as well as the characteristic data of the compactor.

The following tables contain mean area and volumetric out-put data for the compaction equipment.

1 BT 60/4 62 - •0,35 0,30 0,25 BT 65/4 68 - •0,40 0,30 0,25 BT 80 D 81 - •0,40 0,30 0,25

BP 10/35 65 - •0,20 0,20 - BP 12/40 72 - •0,20 0,20 - BP 12/50 A 75 - - - - 2 BP 20/50 95 - •0,25 •0,20 - BP 20/50D 109 - •0,25 •0,20 - BP 25/50 108 - •0,30 •0,25 0,15 BP 25/50D 122 - •0,30 •0,25 0,15 BVP 10/36 83 - •0,20 0,20 - BVP 18/45 91 - •0,20 0,20 -

BPR 25/40 111 - •0,30 •0,25 0,15 BPR 25/40 D 129 - •0,30 •0,25 0,15 BPR 25/50 120 - •0,30 •0,25 0,15 BPR 25/50 D 139 - •0,30 •0,25 0,15 3 BPR 35/42 D 190 - •0,30 •0,25 0,15 BPR 35/60 180 - •0,30 •0,25 0,15 BPR 35/60 D 205 - •0,30 •0,25 0,15 BPR 45/55 D 381 - •0,35 •0,30 0,25 BPR 55/65 D 436 - •0,40 •0,35 0,25 BPR 70/70 D 575 0,35 •0,45 •0,40 0,30 BPR 100/80 D 712 0,50 •0,60 •0,40 0,25

BPH 80/65 S 743 0,50 •0,60 •0,40 -

4 BW 55 E 161 - •0,20 •0,20 - BW 71 E-2 488 - •0,25 •0,25 0,15

5 BW 65 S-2 626 - •0,20 •0,20 0,10 BW 75 S-2 943 - •0,25 •0,25 0,15 BW 62 H 602 - •0,20 •0,20 0,10 BW 65 H 709 - •0,20 •0,20 0,10 BW 75 H 1015 - •0,25 •0,25 0,15

6 BMP 851 1548 - 0,35 •0,35 0,25 BMP 8500 1595 - 0,35 •0,35 0,25

7.2 Earth work

Reference values for layer thickness dependentupon the compaction equipment

Compacted layer thickness (m)Type of machine/Operating weight CECE

(kg)Rock Gravel, Sand Mixed soil Silt, Clay

47

The reference values in the following tables are the results of compaction trials and practical applications. Under normal application related conditions the required compaction values are thereby reached after four to eight passes.

• Particularly suited to this type of soil.

1 BT 60/4 62 - 11-15 8-11 6-9 BT 65/4 68 - 13-17 8-12 7-10 BT 80 D 81 - 13-17 8-12 7-10

BP 10/35 65 - 10-15 10-15 - BP 12/40 72 - 11-16 11-16 - BP 12/50 A 75 - - - - 2 BP 20/50 95 - 13-23 13-20 - BP 20/50D 109 - 13-23 13-20 - BP 25/50 108 - 15-24 14-21 8-12 BP 25/50D 122 - 15-24 14-21 8-12 BVP 10/36 83 - 11-16 11-16 - BVP 18/45 91 - 17-23 14-20 -

BPR 25/40 111 - 15-24 13-20 8-12 BPR 25/40 D 129 - 15-24 13-20 8-12 BPR 25/50 120 - 15-24 13-20 8-12 BPR 25/50 D 139 - 15-24 13-20 8-12 3 BPR 35/42 D 190 - 21-30 17-24 10-15 BPR 35/60 180 - 21-30 17-24 10-15 BPR 35/60 D 205 - 21-30 17-24 10-15 BPR 45/55 D 381 - 30-40 25-34 21-28 BPR 55/65 D 436 - 41-55 36-48 26-35 BPR 70/70 D 575 39-52 50-66 39-52 33-44 BPR 100/80 D 712 70-110 90-120 60-90 25-40

BPH 80/65 S 743 80-120 95-130 65-95 -

4 BW 55 E 161 - 15-23 15-23 - BW 71 E-2 488 - 35-55 35-55 21-23

5 BW 65 S-2 626 - 30-45 30-45 15-22 BW 75 S-2 943 - 40-55 40-55 20-35 BW 62 H 602 - 29-42 28-42 15-22 BW 65 H 709 - 30-45 30-45 15-22 BW 75 H 1015 - 40-55 40-55 20-35

6 BMP 851 1548 - 52-82 52-82 30-40 BMP 8500 1595 - 52-82 52-82 30-40

7.3 Earth work

Actual output

Compaction output (m3/h)Type of machine/Operating weight CECE

(kg)Rock Gravel, Sand Mixed soil Silt, Clay

48


1 BT 60/4 62 - 25-30 25-30 BT 65/4 68 - 30-35 30-35 BT 80 D 81 - 30-35 30-35

BP 10/35 65 70-85 60-65 - BP 12/40 72 70-85 60-65 - BP 12/50 A 75 90-105 70-80 - 2 BP 20/50 95 90-105 70-80 - BP 20/50D 109 90-105 70-80 - BP 25/50 108 90-105 80-90 70-80 BP 25/50D 122 90-105 80-90 70-80 BVP 10/36 83 - - - BVP 18/45 91 - - -

BPR 25/40 111 80-95 65-75 55-65 BPR 25/40 D 129 80-95 65-75 55-65 BPR 25/50 120 100-115 80-90 70-80 BPR 25/50 D 139 100-115 80-90 70-80 3 BPR 35/42 D 190 - 80-90 70-80 BPR 35/60 180 - 100-120 80-100 BPR 35/60 D 205 - 100-120 80-100 BPR 45/55 D 381 - 107-134 89-107 BPR 55/65 D 436 - 131-164 109-131 BPR 70/70 D 575 - 141-176 118-141 BPR 100/80 D 712 - - -

BPH 80/65 S 743 - - -

4 BW 55 E 161 80-85 40-50 - BW 71 E-2 488 150-160 75-100 75-100

5 BW 65 S-2 626 240-250 160-170 160-170 BW 75 S-2 943 270-290 180-190 185-190 BW 62 H 602 210-225 140-150 140-150 BW 65 H 709 240-250 160-170 160-170 BW 75 H 1015 270-290 180-190 185-190

6 BMP 851 1548 - - - BMP 8500 1595 - - -

49

7.4 Asphalt work

Real output dependent upon compactionequipment

Compaction output (m2/h)Type of machine/Operation weight CECE

(kg)Layer thickness

2-4 cm 6-8 cm 10-14 cm


1 BT 60/4 68 - 4-5 7-9 BT 65/4 76 - 5-6 8-10 BT 80 D 81 - 5-6 8-10

BP 10/35 65 3-7 9-12 - BP 12/40 72 3-7 9-12 - BP 12/50 A 70 5-10 11-15 - 2 BP 20/50 95 5-10 11-15 - BP 20/50D 109 5-10 11-15 - BP 25/50 108 7-14 12-18 20-25 BP 25/50D 122 7-14 12-18 23-28 BVP 10/36 83 4-8 10-13 - BVP 18/45 91 5-10 11-15 -

BPR 25/40 111 5-11 10-15 17-22 BPR 25/40 D 129 5-11 10-15 17-22 BPR 25/50 120 6-12 12-18 23-28 BPR 25/50 D 139 6-12 12-18 23-28 3 BPR 35/42 D 190 - 12-80 23-28 BPR 35/60 180 - 14-24 19-33 BPR 35/60 D 205 - 14-24 19-33 BPR 45/55 D 381 - 15-26 21-36 BPR 55/65 D 436 - 19-31 26-44 BPR 70/70 D 575 - 20-34 28-47 BPR 100/80 D 712 - - -

BPH 80/65 S 743 - - -

4 BW 55 E 161 4-8 6-10 - BW 71 E-2 488 8-15 12-20 20-35

5 BW 65 S-2 626 12-23 23-31 39-55 BW 75 S-2 943 14-26 26-36 45-63 BW 62 H 602 11-21 21-28 35-45 BW 65 H 709 12-23 23-31 39-55 BW 75 H 1015 14-26 26-36 45-63

6 BMP 851 1548 - - - BMP 8500 1595 - - -

50

7.5 Asphalt work

Real output dependent upon compactionequipment

Compaction output(t/h)Type of machine/Operating weight CECE

(kg)Layer thickness

2-4 cm 6-8 cm 10-14 cm


51

8.1 Terminology

The following list of terms or calculation bases serves as a help for better understanding of the technical data.

No. Term Dim Explanation

01 Dimensions mm • all dimensions in mm

02 Axle load kg • the value of the static weight (in kg) applied to an axle

03 Drive - • mechanical from diesel or gasoline engine via - V-belt, toothed belt or chain, transmission, drive shaft • hydrostatic from diesel or gasoline engine via - hydraulic pump and hydraulic motor

04 Amplitude mm • half of the oscillation distance in millimeters (mm) that the compacting tool (plate or drum) moves during one rotation of the exciter shaft

05 Working speed m/min • the distance in (m) the machine travels per minute (min)

06 Operating weight kg • the static weight of the machine (CECE) incl. - fluids and lubricants - 50% of the fuel tank contents x 0.84 (specific weight) - 50% of the water tank contents - 75 kg weight of the operator only for ride-on machines)

07 Rated speed rpm • the number of revolutions of the diesel or gasoline engine per minute

08 Basic weight kg • the static weight of the machine without fuels and lubricants

09 Travel speed km/h • the distance in kilometers (km) the machine travels in one hours (h)

10 Static area load kg/m2 • in accordance with the operating weight of the machine in kg divided by the contact area of the base plate

52

No. Term Dim Explanation

11 Frequency Hz • the number of revolutions the exciter shaft performs per second (Hz) or per minute (l/min) 1/min Example: 50 Hz = 50 rev./sec = 50 x 60 = 3000 rpm

12 Max. fuel l/h • the consumption of fuel consumption (diesel or gasoline) in l with the engine running under 100% load Remark: The average load is approx. 50–75%

13 Rated power kW • the effective output of the engine ISO 9249 at the flywheel in kilowatt (kW) at an adjusted nominal speed

14 Static linear kg/cm • the axle load (kg) divided by the load or working width of the drum in kg/m (cm) od (m)

15 Mixing ratio – • the mixing ratio of gasoline and oil (two-stroke engines only) Example: 50:1 = 50 l of gasoline + 1 l or oil

16 Centrifugal force kN • the force generated by the exciter or shaft in kilonewtons (kN), which t causes the compaction medium (drum or plate) to vibrate. Depends on the vibrating mass of the compacting tool and the frequency. Attention: The indication of a high centrifugal mass is no guarantee for a high compaction performance.

17 Track radius mm • the turning radius in mm, that the machine can drive at full lock; measured from the theoretical centre of the circle to the inner edge of the drum/wheel

53

Notice

54

Notice

PRE 101 329 04/10

Head Office/Hauptsitz:BOMAG Hellerwald56154 BoppardGERMANYTel.: +49 6742 100-0 Fax: +49 6742 3090e-mail: [email protected]

BOMAG Maschinenhandelsgesellschaft m.b.H. Porschestraße 91230 WienAUSTRIATel.: +43 1 69040-0Fax: +43 1 69040-20e-mail: [email protected]

BOMAG (CANADA), INC.3455 Semenyk CourtMississauga, Ontario L5C 4P9CANADA Tel.: +1 905 361 9961Fax: +1 905 361 9962e-mail: [email protected]

BOMAG (CHINA) Compaction Machinery Co. Ltd.No. 2808 West Huancheng Road,Shanghai Comprehensive Industrial Zone (Fengxian), Shanghai 201401CHINA Tel.: +86 21 33655566Fax: +86 21 33655508e-mail: [email protected]

BOMAG FRANCE S.A.S.2, avenue du Général de Gaulle91170 Viry-ChâtillonFRANCE Tel.: +33 1 69578600Fax: +33 1 69962660e-mail: [email protected]

BOMAG (GREAT BRITAIN), LTD.Sheldon Way, LarkfieldAylesfordKent ME20 6SEGREAT BRITAINTel.: +44 1622 716611Fax: +44 1622 718385e-mail: [email protected]

BOMAG ITALIA Srl.Z.I. Via Mella, 625015 Desenzano del Garda (BS)ITALYTel.: +39 030 9127263Fax: +39 030 9127278e-mail: [email protected]

BOMAG JAPAN CO., Ltd.12-7 Daidoh-Cho 2-ChomeAkashi-City, Hyogo Pres 673 0029 JAPANTel.: +81 78 924 1631Fax: +81 78 924 1633e-mail: [email protected]

BOMAG Polska Sp. z.o.o.Ul. Szyszkowa 5202 285 Warzawa POLANDTel.: +48 22 482 0400Fax: +48 22 482 04 01e-mail: [email protected]

Representative officeof BOMAG GmbHLeningradsky prospect, h.72, b. 4Office 2307, 125315 MoscowRUSSIATel.: +7 (495) 287 92 90Fax: +7 (495) 287 92 91e-mail: [email protected]

BOMAG GmbH 300 Beach RoadThe Concourse, #38-03Singapore 199555SINGAPORETel.: +65 6 294 1277Fax: +65 6 294 1377e-mail: [email protected]

BOMAG Americas Inc.2000 Kentville RoadKewanee, Illinois 61443U.S.A.Tel.: +1 309 8533571Fax: +1 309 8520350e-mail: [email protected]

Documents

Product Guide Light Equipment