Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Mimaki Europe B.V.Sign Graphics Products
Product Guide
Stunning Beauty & Outstanding Speed
Working with SS21 / BS3 / SB53 inks
The information in this document is subject to change without notice.
27-11-2014Ver1.0.1EU
Mimaki Europe B.V.Sign Graphics Products
Terms of use
• The contents of this presentation are intended only for Mimaki authorized resellers. Authorized persons are not permitted to distribute, copy or change this presentation without explicit approval of Mimaki Europe B.V.
• Contents and technical explanations in this presentation are based on the test results achieved at Mimaki at the time of testing and are not a guarantee for performance. Substrates should be tested beforehand.
• In addition, the contents in this presentation do not lead to any legal obligations from Mimaki and Mimaki does not take any responsibility. Please verify in advance whether your intended prints will result in sufficient quality.
• Contents of this presentation are subject to change without prior notice for improvement. Compositors errors reserved.
Mimaki Europe B.V.Sign Graphics Products
Features
• High quality printing by Mimaki’s original technologies• Smooth image quality by waveform control and precise dot placement technology• Mimaki’s proprietary 3-way intelligent heater optimizes dot gain• MAPS3 eliminates banding and delivers smooth print densities
• Unattended operation support package• Nozzle Checking Unit for delivering an continuous high printing quality• Uninterrupted Ink Supply system for large amount of productions• Strong media feeding system, max weight of 40kg and up to a diameter of 250mm
• High quality printing and high printing speeds of 56 m²/h • High quality printing with the drop size of 4pl and the resolution of 1440dpi• Maximum print speed of 56m²/h with the drop size of 35pl
• More applications with Orange and Light Black ink• Printing with orange ink, gives a larger color gamut, for printing more corporate colors• Accurate gray scale printing, with light black ink, without color shifts
3
Mimaki Europe B.V.Sign Graphics Products
PC
System configuration
4
Works also with:
USB 2 0 5m(15ft) cable is recommended
Connection
Including Rip software
AMF Kit MBIS3 Drying Fan Air exhaust unit Anti-static sheet Additional Pinch roller 8x Eco-cartridge for BS3 inks
Options
Recommended specificationsCPU: Core i5 3.2GHzMEMORY: 8GBHDD: 500GBUSB2.0: 4 ports or moreOptical disk drive: DVD-ROMWindows7 Professional 64bit Monitor: 1366x768
Mimaki Europe B.V.Sign Graphics Products
Ink Type / Ink Set
5
8 different ink colors
2 ink set selections
4C: High speed printing
8C: Smooth, vibrant colors
M C Y K K Y C M
M C Y K Lc Lm Lk Or
Capacity:CMYKLcLmLkOr:
440ml cartridge2L Ink pack, for MBIS3
SS21
Mimaki Europe B.V.Sign Graphics Products
Ink Type / Ink Set
6
CapacityCMYK:
600ml Ink pack, with theEco-cartridge2L Ink pack, for the MBIS3
BS3
4 Colors
Ink set4C : High speed printing
M C Y K K Y C M
M C Y K K Y C M
Sb53
7 Colors
*K ink is also available
Ink set4C : High speed printing
6C : Smooth and vibrant colors
CapacityBMYDK(K)LbLm:
440ml cartridge2L Ink pack, for the MBIS3
M B Y Dk Lb Lm
M B Y Dk Dk Y B M
M B Y Dk Lb Lm B M
Mimaki Europe B.V.Sign Graphics Products
Head layout
• 1 Print head is incorporated • Ejects 7 different drop sizes from 4pl/7pl/8pl/14pl/16pl/24pl/35pl• Prints both high quality mode and high speed mode
7
Nozzle row lengthApprox.25.4mm(1 inch)
Nozzle widthApprox.31mm(1.2 inch)
1-head:1440-nozzle(180-nozzle x 8-lines)
1 2 3 4 5 6 7 8
Mimaki Europe B.V.Sign Graphics Products
Highly versatile printer
• Larger Ink drop
• 3 different drop sizes are automatically selected from 7drop sizes, depending on the selected print quality (profile)
• When working with SS21, the 7 drop sizes are 4pl,7pl,8pl,14pl,16pl,24pl, and 35pl
• High speed printing with high densities is attained by taking advantage of the maximum drop size of 35pl
• The variable dot technology, with a maximum dot size of 35pl, is used for the highest productivity of 56.2m²/h with SS21/BS3 and 58m²/h with SB53
• This gives the printer a wide coverage, from high resolutions with high qualities to low resolution printing, with higher densities
8
Case 1 : Maximum dot size =21pl Case 2 : Maximum dot size =35pl
Large21pl
Middle14pl
Small4pl
1 /360 inch
1 /360inch
Large35pl
Middle14pl
Small4pl
1 /360 inch
1 /360 inch
Low density due to an gap between the dots↓
Not suitable for high speed mode (low resolution)
High density with no gap between the dots↓
Suitable for High speed mode
Mimaki Europe B.V.Sign Graphics Products
Print Speed (SS21/BS3)
• 4C ink set, CMYK
9
PVC Banner
㎡/h ㎡/h
The print modes in this document is the performance of the printer. The media profiles are created depending on the media type. Creating profiles with MPM II is possible, when the media profile is not available.
1,9
4,9
6,3
9,7
11,4
13,9
17,0
2,2
5,6
7,2
11,1
13,1
16
19,5
0 10 20 30
Super Smooth1440x1440,16P,Bi
High Quality②720x1440,12P,Bi
High Quality①720x1080,8P,Bi
Standard②720x720,6P,Bi
Standard①720x720,5P,Bi
High Speed720x720,4P,Bi
Draft540x720,4P,Bi
JV150-160
JV150-1305,7
9,7
13,9
17,0
31,3
48,9
6,6
11,1
16
19,5
36
56,2
0 20 40 60
High Quality720x1440,10P,Bi
Standard②720x1080,6P,Bi
Standard①720x720,4P,Bi
High Speed540x720,4P,Bi
Draft540x360,2P,Bi
Super Draft360x360,1P,Bi
JV150-160
JV150-130
Mimaki Europe B.V.Sign Graphics Products
Print Speed (SS21), 8C ink set
• 8C: CMYKLcLmLkOr
10
㎡/h ㎡/h
1,5
3,1
3,7
4,9
5,7
7,1
1,7
3,6
4,3
5,6
6,6
8,2
0 5 10 15 20
Super Smooth1440x1440,20P,Bi
High Quality720x1440,18P,Bi
Standard②720x1080,16P,Bi
Standard①720x1080,12P,Bi
High Speed720x720,10P,Bi
Draft720x720,8P,Bi
JV150-160
JV150-130 3,1
4,1
5,7
7,1
8,5
15,5
24,4
3,6
4,7
6,6
8,2
9,8
17,8
28,1
0 10 20 30
Super Smooth720x1440,18P,Bi
High Quality720x1080,14P,Bi
Standard②720x720,10P,Bi
Standard①720x720,8P,Bi
High Speed540x720,8P,Bi
Draft540x360,4P,Bi
Super Draft360x360,2P,Bi
JV150-160
JV150-130
PVC Banner
Mimaki Europe B.V.Sign Graphics Products
Outstanding Speed, Sb53 inks
• Sb53 4C and 6C printing speeds
11
BMYDk(K) BMYDk(K)LbLm
m²/h m²/h
3,1
4,1
5,7
7,1
8,9
16,3
25,7
3,6
4,7
6,6
8,2
10,2
18,7
29,5
0 10 20 30 40
Super Smooth720x1440,18P,Bi
High Quality720x1080,14P,Bi
Standard②720x720,10P,Bi
Standard①720x720,8P,Bi
High Speed540x720,8P,Bi
Draft540x360,4P,Bi
Super Draft360x360,2P,Bi
JV150-160
JV150-130
5,7
7,1
9,7
13,9
17,0
21,8
31,9
50,5
6,6
8,2
11,1
16
19,5
25
36,7
58
0 20 40 60 80
Super Smooth720x1440,10P,Bi
High Quality720x1440,8P,Bi
Standard②720x1080,6P,Bi
Standard①720x720,4P,Bi
High Speed②540x720,4P,Bi
High Speed①540x360,3P,Bi
Draft540x360,2P,Bi
Super Draft360x360,1P,Bi
JV150-160
JV150-130
Mimaki Europe B.V.Sign Graphics Products
Outstanding Speed, Sb53 inks
• 2 different types of black ink• 2 types of black ink are offered to meet customer's demand
12
Type Advantage Disadvantage
Sb53-K
• Less smoke generation, during heat transfer
• Less grainy results can be seen at the low gradation areas
• When printing with 100%, the density is the same as Dk ink, but the density is lower in the areas with low gradations
Sb53-DK• Reflection density is higher at the
low gradation part
• Grainy results can be seen at the low gradation areas
• More smoke generation during heat transfer, compared to the K ink
Mimaki Europe B.V.Sign Graphics Products
• Waveform Control Technology for high quality printing
• High accuracy dot placement• Jetting ink drops in straight lines, high accuracy dot placement with
almost perfect round dots
• Generating less mist • Printing clear and sharp letters, lines, edges, etc.
• Waveform is optimized, to reduce the risk of missing nozzles
Stunning Quality
13
Mimaki Europe B.V.Sign Graphics Products
Stunning Quality
14
Ink dots do not overlap and gives an accurate dot placement
↓No grainy appearance
Ejects ink in straight lineswith a near-perfect circle
Ejects ink not straightly and not with a perfect circle
Ink dots overlap and no accurate dot placement↓
Grainy appearance and uneven density
Mimaki Europe B.V.Sign Graphics Products
Stunning Quality
• Variable ink Dot Technology• Printing with 3 different dot sizes, small, medium and large• Delivers a high image printing quality, with very smooth gradations• 3 different drop sizes are selected from 4pl/7pl/8pl/14pl/16pl/21pl/29pl/35pl,
depending on the type of ink and the selected print mode• This allows printing in not only high resolution printing, for high quality, but also
high speed & high density printing for high productivity!
15
Variable dot
Normal dot
Mimaki Europe B.V.Sign Graphics Products
Stunning Quality
• 3Way Intelligent Heater plus Top Blower• Optimizes the dot gain• Generates a higher print quality without bleeding, by a quick and accurate ink dot
fixing, by heating the media to a perfect temperature, through the Pre- and Print heaters
• The Post-heater provides additional drying after printing• The top blower assists drying the ink on the media surface, to support high
speed/density printing
16
3-way Intelligent Heater patent No.
Japan 4889059
USA 8.444.262
China ZL 200910222559.8
Pre-heater
Post-heater
Heater coverPrint-head
Pinch roller
Grid roller
Print- heater
Post-heater to ensures faster drying
Controls drop size by heating up media.
Mimaki Europe B.V.Sign Graphics Products
Stunning Quality
17
Normal PassMAPS3
• MAPS3 (Mimaki Advanced Pass System 3)• MAPS3 prints passes in gradation-like tone, by dispersing ink drops between the
passes, which reduces banding, uneven drying ink, and bidirectional stripes• MAPS3 works in the higher pass modes of an resolution
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• NCU (Nozzle Check Unit)
• Stable printing quality, by preventing printing with clogged nozzles
• NCU checks the nozzle condition automatically per transferred file or the set print length
• When nozzles are clogged, the cleaning is then started automatically
• When the clogged nozzle is not recovered by cleaning, the Nozzle Recovery System is then automatically done, and printing starts
18
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• NCU (Nozzle Check Unit)
19
Light emitter Receiver
Print headInk ejection by each nozzle line
Sensor:Receiver detects a light → no ink drop →Cleaning
The NCU unit
Nozzle check duration: 50sec./checkNozzle check ink consumption: 192 cc/year**Operating Condition: One check/hour x 10-hour operation/day x 240-day
NCU operation flow
Checks nozzles
Nozzle recovery is then automatically set
Start printing
Warning (Standby)
Yes
No
All nozzles are checked per nozzle line
When missing nozzles could not be recoveredafter retrying cleaning.
The number of the retrying cleaning can
be changed.
Nozzle MissingYes/No
Cleaning is done automatically
Nozzle check setup
1. After printing, one file2. After printing, the set print length
When the number of missingnozzles is higher than the number
in the setup
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• NRS (Nozzle Recovery System)
• Increases the uptime
• Replaces missing nozzles, by working nozzles in other passes
• No need for direct service intervention
• Makes printing with the same quality possible, even if nozzles are missing
20
Continuous printing by NRS
Continuous OperationDown Time
Mimaki Europe B.V.Sign Graphics Products
• NRS (Nozzle Recovery System)
Continuous Operation
21
• 10 nozzles can be registered per 1 nozzle line • NRS is not changing the printing speed• NRS is not working when:
• Printing in low pass modes• Printing in some modes with MAPS3 • The position of the nozzle is not correct
Register the number of missing nozzles
Replacing the clogged nozzle, by using a other working nozzle
Nozzle check pattern
Clogged/Missing nozzles
Mimaki Europe B.V.Sign Graphics Products
Stunning Quality
• New orange ink with SS21
• Wider gamut with new Orange ink
• Orange ink is added as an process color
• Covering approx. 94.8% of the PANTONE coated color chart. 7% more than with 4C only
• The large color gamut makes it easy possible to reproduce more corporate colors, etc.
22
M C Y K Lc Lm Lk Or
Mimaki Europe B.V.Sign Graphics Products
-120
-100
-80
-60
-40
-20
0
20
40
60
80
100
120
-120 -100 -80 -60 -40 -20 0 20 40 60 80 100 120
CMYKLcLmLkOr
CMYK
PANTONE近似色
Stunning Quality
• SS21 with Orange ink
23
High reproducibility with bright, fresh
Orange
Less freshness without orange ink
CMYKLcLmLk+OrCMYKLcLm
Gamut comparison Comparing print results
*PANTONE solid chips coated(1085 colors)
Colors of PANTONE
Mimaki Europe B.V.Sign Graphics Products
Stunning Quality
• SS21 with Light-black ink• High quality Monochrome color reproduction with the new Light-Black ink• Smooth color balance without color shifting, reproducing high quality
monochrome smooth and clear grey output
24
CMYKLcLmLkOrCMYKLcLm
• Clear grey• Smooth skin
• Reddish grey• Skin w/grainy
appearance
• Reddish grey • No color shift and smooth gradation
CMYKLcLmLkOrCMYKLcLm
Mimaki Europe B.V.Sign Graphics Products
• Automatic Wiper Cleaning
• The ink on the wiper is automatically removed during the cleaning procedure of the wiper
• No pollution of the print head caused by ink residue from the wiper
• Easier daily maintenance as the wiper is cleaned automatically
Continuous Operation
25
1. Washing liquid
2. Wipe out
Wiper Cleaner
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• Event Mail Notification • Various information can be sent from via email• Read the status of the printer on remote locations, allowing unattended
printing
26
USB
RIP-PC Mobile device
Print start/completedError/Warning
Internet Receiving Mail
LAN
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• Ink Supply Systems• UISS*(Uninterrupted Ink Supply System)
• In 4C ink-set, when the ink runs out, ink is automatically supplied from the other cartridge for continuous operation
• Not available with 6C/8C ink-set
• Non-Stop Ink replacement• Working with the 4C ink-set, an empty ink cartridge can be replaced with a
new one, without stopping the active print job• No waste of time and media or ink• When using the Sb53 6C ink set, UISS works with M and Bl• Not available with 6C+WW and 8C ink sets
• Optional, MBIS3 (Mimaki Bulk Ink System III)• Large volume, 2L ink packs, are placed directly on to
the ink station• Making it possible to print, continuous large print jobs• The new MBIS3 on the printer saves working space,
and large 2L ink pack saves running cost
27
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• Media feeding and take-up system• Stable Feeding/Take-up for heavy-weight media• Smooth handling of various medias are supported by the new Feeding/Take-up
system• max. Weight of 40kg• max. diameter of 250mm
• Convenient media installation• Media stand
• The media stand is available for both, feeding and take-up unit• Supporting installing and removing of heavy media rolls
28
At rear side At front sideMedia stand
Mimaki Europe B.V.Sign Graphics Products
Continuous Operation
• High media feeding accuracy
• Compensates for diameter changes of the take-up roll
• Adjustable pinch roller
• Adjust the number of pinch rollers, to be used, depending on the width and type of media
29
Pushing down the pinch roller Lifting-up the pinch roller
Mimaki Europe B.V.Sign Graphics Products
Optimize Work Efficiency
• Highly Visible Design of the Machine• Color LCD Control Panel
• Display size of 52.56mm x 70.08mm • Allowing easy setup and control
• The Status LED• LED status lamp indicates the status of the printer• Easy to see from an distance
30
Various information is displayed in a graphical manner, such as media width, heater temperature and remaining ink
Status LEDBlinking in Blue: Normal operationBlinking in Red: Needs attention
Mimaki Europe B.V.Sign Graphics Products
Stable printer
• Lift up block
• By attaching the Lift Up Blocks to the casters of machine
• Prevents the shaking of the machine while printingwith lift up block
Mimaki Europe B.V.Sign Graphics Products
Media feeding and take-up
• Handles media of up to 40kg
• The take-up roll unit of JV150 has a strong torque to feed media of 40kg
• Maximum diameter of up to 250mm
• The height of the take-up roll unit is 17cm, which is high enough to roll up the media of the diameter of up to 250mm
• Prints one roll of media with high feeding accuracy
• The diameter of the taken-up media is measured by a censor
• This keeps the tension of the media constant
32
Take-up roll switchFor manual operation
press the button to roll up the media.
Mimaki Europe B.V.Sign Graphics Products
Rip software, RasterLink6
Frequently used setting can be registered as “My Favorite”. Up to 30 settings can be registered.
Intuitive Operation New Advanced Functions
The main information is in one screen. The status of printer, the progress of ripping, the status of job can be checked at a glance. Nesting or composition of job are displayed visually.
1
The visual icons on the right side of the screen allows for the easy and quick setting of the print condition.
2
3
・Batch printing“Test the best profile when trying to print on
media which has never been used before”
・Convenient functionsEstimated Completion Time displayEnhanced layout functionPrinter Status display
The web update is available as well as RasterLinkPro5 which has been well received.The program update and the profile download can be done through the web easily
Web Update function
Mimaki Europe B.V.Sign Graphics Products
Input Profile
• Input profile “WideMimakiNaturalVivid” is available for reproducing brilliant color for Orange and Light Black ink set.
34
WideMimakiCMYK WideMimakiNaturalVivid WideMImaki2013forSign
・Mimaki’s standard input profile
・Available from(C)JV300/150 Series
・Reproduces brilliant colorand natural skin tone for(C)JV300/150 (Or,Lk)
・Available from JV400LXSeries
・High intensity input profile specialized for JV400LX(Or,G)
Mimaki Europe B.V.Sign Graphics Products
Options
• AMF Kit- tension bar for the take-up system
• Advised to order, when printing on higher speeds
• OPT-J0360 for JV150-130
• OPT-J0359 for JV150-160
• MBIS3 – Mimaki bulk ink system
• OPT-J0364 for JV150 series
• Anti-static sheet
• OPT-J0358 for JV150-130
• OPT-J0356 for JV150-160
Mimaki Europe B.V.Sign Graphics Products
Options
• Additional Pinch roller
• OPT-J0376 for JV150-130
• OPT-J0362 for JV150-160
• Drying Fan
• OPT-J0352 for JV150-130
• OPT-J0351 for JV150-160
• Air exhaust unit
• When ordering the Air exhaust unit, also the Drying fan needs to be ordered!
• OPT-J0354 for JV150-130
• OPT-J0353 for JV150-160
• Eco-cartridge needed for BS3 inks
• OPT-J0361, 1 set of 4 eco-cartridges, order 2 sets
Mimaki Europe B.V.Sign Graphics Products
●Remarks1. Do not install on the weak surface floor.2. Make sure to use in a ventilated environment.
・Environmental temperature: 20℃-30℃・Quality assurance temperature: 20℃-25℃・Humidity: 35-65%Rh (no condensation)・Temperature gradient: ±10℃/h or less・Dust: Equivalent to office environment
3.Do not install on carpets, etc because those are easy to be charged, and it can effect the image quality.
4. Ink odor generates. Please use the machine in a well-ventilated environment.
5. Do not install in the place where using a photographfixer or the place with acid steam like acetic acid, hydrochloric acid.
Packing / Installation
37
Model Width Depth Height WeightManpower for
installationPer
Container
JV150-130 2,662mm750mm 1,050mm
230Kg4
20ft:12x40ft:24xJV150-160 2,912mm 215kg
*Installation space for PC is required separately
Installation condition
Mimaki Europe B.V.Sign Graphics Products 38
JV150-130 JV150-160
Print head On-demand piezo print head
Resolution 360 dpi,540 dpi,720 dpi, 1080 dpi, 1440 dpi
Drop size Min. 4pl, Max.35pl
Head height 2.0mm/2.5mm/3.0mm *manual adjustment(+1.0mm or +2.0mm)
Ink type Eco solvent ink:SS21/BS3/ES3(to be available separately) Sublimation Ink:Sb53
Ink color SS21:8-color (CMYKLcLmLkOr), BS3(CMYK), Sb53(BlMYKDKLBlLm)
Ink capacity SS21:440ml cartridge/2L ink pack BS3:600ml ink pack/ 2L ink pack
Sb53:440ml cartridge/2L ink pack
Max. printing width Max.1,361mm Max.1,610mm
Max. media width Max.1,371mm Max.1,620mm
Media thickness 1.0mm (0.039’”) or less
Roll weight 40kg (88lb) or less
Outside dimension 2,525mm(W)x700mm(D)x1,392mm(H) 2,775mm(W)x700mm(D)x1,392mm(H)
Packing size 2,662mm(W)x750mm(D)x1,050mm(H) 2,912mm(W)x750mm(D)x1,050mm(H)
Body weight 160kg 185kg
Power supply Single phase (AC100~120V/220~240V ±10%)×1 50/60Hz±1Hz
Power consumption (100V) Max 1440W×1 (220V)Max 1920W×1
Applicable standards VCCI class A / FCC class A / UL60950-1ETL / CE Marking(EMC, Low Voltage and Machinery) CB report / RoHS / REACH・CCC(pending)・Energy Star / RCM
Specifications
Mimaki Europe B.V.Sign Graphics Products
FAQ
39
# Questions Answers
1 Are white ink and silver ink supported? No, those aren’t. JV150 does not have ink circulation system.
2 Is the NCU same as JV5’s? No t isn’t. JV5’s NCU checks nozzles while scanning, but , JV150’ NCU checks nozzles per transferred file or set length.
3 How the PANTONE color coverage is calibrated? The coverage of the gamut of Lab value.
4 What is the outdoor resistance of Orange ink? Equivalent to CMYK.
5 Is the CMYKLcLm ink set available? No, it isn’t. Because, the print speed is same as CMYKLcLmLkOr ink set.
6 Is sublimation ink supported? Yes, it is.
7 Is RLP5 supported? No, it isn’t.
8 Is the ink set between BS3 and SS21 switchable? No, it isn’t.
9 Is the Ethernet connection supported? No, it isn’t. LAN port is for the event mail notification.
10 Can MAPS3 be turned OFF? No, it can’t.
11 Has the power source of the Drying fan unit to be separated from the printer's?
Yes, it has to be. Power supply of less than 1.4A is required. (No restriction on voltage)
12 Is the power source required for the Air exhaust unit separately from the printer or the Drying fan unit?
No, it doesn’t. Because, the Air exhaust unit draws power from the Drying fan.In order to use the Air exhaust unit, the Drying fan unit has to be installed at the same time.
13 What is the precaution when using external heater? Please use optional Relay Box to make it work in conjunction with the printer's state.