Product Guide Ineo 163_213

1

Product Guide ineo 163/213

ineo 163/213

23.07.07

Product Guide

2


Table of contents

Product Basic ........................................................................................... 3

Product Configuration............................................................................... 4

System Specifications .............................................................................. 7

Copier Specifications.............................................................................. 11

GDI-Printer Specifications (Standard) .................................................... 14

PCL-Printer Specifications with IC-206 .................................................. 15

Scanner Specifications........................................................................... 19

Fax Specifications .................................................................................. 21

Internet Fax ............................................................................................ 25

Consumables ......................................................................................... 26

Article Numbers...................................................................................... 27

Service Part............................................................................................ 29

Appendix ................................................................................................ 35

3


PPrroodduucctt BBaassiicc

ineo 163 ineo 213

MODEL DEVELOPMENT CODE Tenryu 2 (S) Tenryu 1 (S)

PROPOSED MODEL NAME ineo 163 ineo 213

SUCCESSOR MODEL FOR ineo 161 ineo 210

ESTIMATED SALES START 06 / 07

DATAQUEST SEGMENT I II

ALSO AVAILABLE AS KM bizhub 163 KM bizhub 211

TYPE Desktop, Stationary Platen

MAX. MONTHLY COPY VOLUME 12,000 16,000

AVERAGE MONTHLY COPY VOLUME 2,000 3,000

MACHINE LIFE 240K or 5 years which comes earlier

300K or 5 years which comes earlier

MCBF Body (Mean Copies Between Failure) 28K 35K

MCBF System (Mean Copies Between Failure) 25K 30K

MCBJ (Mean Copies Between Jam) 2000 copies or less

MCBV Body (Mean Copies between Visit) 16K 19K

MCBV System (Mean Copies between Visit) 15K 17K

MTTR (Mean Time To Repair) 30 minutes or less

SAFETY & ENVIRONMENT

English/German Data Sheets dBox / Marketing / Safety and Environment

PLEASE NOTICE Standard paper weight for systems is 80 g/m2 for monochrome machines and 90 g/m2 for full colour ones. Since using these standards result in optimum system performance, all specifications on performance, reliability, maintenance and replacement based on those standard papers. Using thick papers, labels, transfer and polyester films continuously can increase the wear and tear on replacement parts and consumables – meaning your servicing costs will go up. Use the bypass or the lower tray from the paper feed unit when working with materials having such characteristics as polyester films, textile transfer films and labels. Otherwise, you may be faced with double feeding or a higher number of feeding jams. If possible use subtray when working with materials having such characteristics as polyester films, textile transfer films and labels. Roller- marks on the copy or print may appear or increased jams can occur. Standard paper weights yield the best possible copy and print results. Using higher grammage may influence the quality of the output. Using standard paper weights also guarantees that double sided copies and prints are made reliably. Different characters of films as well as thick, thin and coated papers may increase the jam rate for double sided copies and prints.

4


PPrroodduucctt CCoonnffiigguurraattiioonn

SYSTEM DIMENSION

ineo 213

ineo 163

5


SYSTEM CONFIGURATION

Mechanical Counter MC-503

ineo 163

Image Controller IC-206

Network Card NC-503

Fax Kit FK-506

Copier / Fax Memory EM-103 (128 MB)

Multi Bypass Tray MB-501

Copy Desk SCD-21 Large

Copy Desk SCD-21 Small

SCD-21 Stand

Paper Feed Unit PF-502

Job Separator JS-503

Automatic Document Feeder DF-502

Original Cover OC-504

Shift Tray SF-501

Key Counter Mount Kit

6


SYSTEM CONFIGURATION

ineo 213

Multi Bypass Tray MB-501

Copy Desk SCD-21 Large

Copy Desk SCD-21 Small

SCD-21 Stand

Paper Feed Unit PF-502

Job Separator JS-503

Automatic Duplex Document Feeder DF-605

Automatic Document Feeder DF-502

Original Cover OC-504

Automatic Duplex Unit AD-504

Shift Tray SF-501

Image Controller IC-206

Network Card NC-503

Fax Kit FK-506

Mechanical Counter MC-503

Mount Kit for DF-605 MK-501


Copier / Fax Memory EM-103 (128 MB)

7


SSyysstteemm SSppeecciiffiiccaattiioonnss AUTOMATIC DOCUMENT FEEDER DF-502 Option

Original Size A5 – A3 (standard mode) A4 crosswise, B4, A3 (mixed mode)

Original Weight 50 – 110 g/m²

Tray Capacity 50 originals (80 g/m²)

Feeding Type Face up, upper sheet

Feeding Speed 16 opm

Dimensions (WxDxH) mm 598 x 483 x 102

Weight (kg) 6.3

AUTOMATIC DUPLEX DOCUMENT FEEDER DF-605 Option

Original Size A5 – A3

Original Weight Simplex: 35 ~ 128 g/m² Duplex: 50 ~ 128g/m²

Tray Capacity 80 originals (80 g/m²)

Feeding Type Face up, upper sheet

Feeding Speed 35 opm/A4 size

Dimensions (WxDxH) mm 582 x 558 x 145

Weight (kg) 9,4

Remark Can be used only with ineo 213. Mount Kit MK-501 is required.

MOUNT KIT MK-501 Option

Remark Is required to assemble the DF-605 to the ineo 213

ORIGINAL COVER OC-504

Remark Standard for ineo 163, option for ineo 213

8


PAPER CASSETTE Standard

Capacity 1 x 250 sheets universal (80 g/m²)

Paper Format A5 to A3

Paper Weight 60 – 160 g/m²

Copy Media Plain paper, thick paper, OHP, envelopes (refer to recommended media)

Max. Paper Capacity 251 sheets standard (cassette and single bypass), max. 1350 sheets

PAPER FEED UNIT PF-502 Option

Capacity 250 sheets universal (80 g/m²)

Paper Format A5 crosswise to A3

Paper Weight 60 – 90 g/m²

Dimensions (WxDxH) (mm) 590 x 558 x 108

Weight (kg) 5.5

MULTI BYPASS TRAY MB-501 Option

Capacity 100 sheets (80 g/m²)

Paper Format Width: 90 to 297 mm, Length: 140 to 432 mm A6 to A3

Paper Weight Up to 160 g/m²

Copy Media Envelopes (refer to recommended media), OHP, thick paper


Weight (kg) 3.0

AUTOMATIC DUPLEX UNIT AD-504 Option

Paper Size A5 crosswise – A3

Paper Weight 60 – 90 g/m² (plain paper, recycling paper)


Weight (kg) 2.5

Remark Only for ineo 213

9


JOB SEPARATOR JS-503 Option

No. of Bins Machine tray for copies 1st tray for prints and/or faxes

Capacity Machine tray: 150 sheets A4 (80 g/m²) 1st tray: 100 sheets A4 (80 g/m²)

Remark Can’t be used together with SF-501

SHIFT TRAY SF-501 Option

Type Roller unit moving type (drive unit is built in the main body), copies are fed out into the machine tray.

Moving Distance 28 mm

Capacity 250 sheets A4

Remark Can’t be used together with JS-503

IMAGE CONTROLLER (PCL) IC-206 Option

Remark Embedded type, for details refer to chapter “Printer Specifications”

NETWORK CARD NC-503 Option

Remark With the NC-503 network printing for GDI and network scanning (TWAIN, Scan to e-mail/FTP) is possible.

FAX KIT FK-506 Option

Remark Adds fax functionality to ineo 163 / 213

EXPANDED MEMORY EM-103 Option

Capacity 128 MB

RemarkShared memory for Copier/Fax/Print. Memory increases the stored images for sorting, received faxes and improves the scan performance.

MECHANICAL COUNTER MC-503 Option

Remark As back-up for the digital counter

KEY COUNTER MOUNT KIT 2 Option

RemarkElectromechanical authentication-(and charge) devise. Key counter (9323160301) and Socket (0704071302) have to be ordered separately via Spare Parts Department.

10


SCD-21 LARGE Option


Remark Should be used if the system is equipped with 1 PF-502 paper cassettes or if no additional cassette is used at all.

SCD-21 SMALL Option


Remark Should be used if the system is equipped with 2 or 3 PF-502 paper cassettes.

SCD-21 STAND Option

Remark Should be used if the system is equipped with 4 PF-502 paper cassettes.

11


CCooppiieerr SSppeecciiffiiccaattiioonnss

ineo 163 ineo 213

WARM-UP TIME 30 sec. or less 15 sec or less

FIRST COPY Less than 7 sec.flatbed scan Less than 11 sec. via feeder

COPY SPEED 16 cpm A4 crosswise 13 cpm A4 lengthwise 7 cpm A3 lengthwise

21 cpm A4 crosswise 16 cpm A4 lengthwise 12 cpm A3 lengthwise

COPY RESOLUTION 600 x 600 dpi

COPY RAM 32 MB, max. 160 MB

ZOOM 25 - 400% adjustable in 1 % steps

MULTI COPY 1 – 99

EXPOSURE CONTROL Auto, Manual, Text, Photo, Text/Photo

VOID AREA Less than ± 4 mm top/rear side

Less than ± 3 mm left/right side

OUTPUT CAPACITY 250 sheets A4 crosswise, 150 sheets others than A4 crosswise

POWER REQUIREMENT 220 – 240 V : 4.5 A (ineo 163), 5.5 A (ineo 213) 50 / 60 Hz

POWER CONSUMPTION 1,050 W 1,250 W

COPIER DIMENSIONS (W x D x H) mm 599(W) x 620(D) x 487(H)

COPIER WEIGHT (kg) 38kg

FEATURE LIST

2in1 Yes, w/o feeder

4 in 1 Yes, w/o feeder

AMS/APS Yes

2 in 1 Original Separation No

N in 1 2 in 1 / 4 in 1

Duplex Yes, with ineo 213

Book Copy Yes

Booklet Creation No

12


Page Insertion No

Cover Mode No

Continuous Number Stamping No

Date Stamp No

Page Stamp No

Distribution Numbering No

Watermark No

Department Control Yes (50)

Edge / Frame Erase Yes

Image Insertion No

Image Repeat No

Image Shift Yes

Image Rotation Yes

Job / Memory Recall No

Non-Image Area Erase No

OHP Interleaving No

Overlay No

Page Insertion No

Positive-Negative-Mode Yes

Stamp No

X/Y Independent Zoom Yes

Program Memory Yes (2)

Proof Copy No

Separate Scanning No

Multi Access Yes

13


FINISHING FEATURES

Electronic Sorting Yes

Criss / Cross Sorting Yes with 2nd cassette or multi bypass tray

Off-Set Sorting Yes, with SF-501

Stapling No

Punching No

Folding No

14


GGDDII--PPrriinntteerr SSppeecciiffiiccaattiioonnss ((SSttaannddaarrdd))

CPU Shared with copier

PRINT SPEED

12 ppm A4 crosswise for ineo 163 (600 x 600 dpi) 16 ppm A4 crosswise for ineo 163 (300 x 300 dpi)

12 ppm A4 crosswise for ineo 213 (600 x 600 dpi) 21 ppm A4 crosswise for ineo 213 (300 x 300 dpi)

7 ppm A3 for ineo 163 (600 x 600 dpi) 12 ppm A3 for ineo 213 (600 x 600 dpi)

PRINT RESOLUTION 600 x 600dpi,

MAX PRINTABLE AREA Void area of 4 mm on all edges

PDL GDI

PRINT RAM Shared with the 32 MB (max. 160 MB) copier memory

INTERFACE

Parallel No Yes (IEEE1284)

USB 2.0 Yes (Hi Speed)

10/100BaseT Yes, optional with NC-503

PROTOCOLS

Nibble/ECP No/ No

EtherTalk Yes, with NC-503

IPX/SPX Yes, with NC-503

TCP/IP Yes, with NC-503

SNMP Yes, with NC-503

SMTP/POP3 Yes/ Yes, with NC-503

HTTP Yes, with NC-503

Netware Yes, with NC-503

NDPS Yes, with NC-503

Ipd Yes, with NC-503

IPP no

PRINTER DRIVER GDI

Support OS Windows 98SE/Me/2000/XP/2003 Server (Vista 10/07)

15


PPCCLL--PPrriinntteerr SSppeecciiffiiccaattiioonnss wwiitthh IICC--220066

CPU Hitachi CX86202

PRINT SPEED

16 ppm A4 crosswise [600 x 600dpi] (ineo 163) 21 ppm A4 crosswise [600 x 600dpi] (ineo 213)

13 ppm A4 crosswise [1200 x 600dpi] (ineo 163) 13 ppm A4 crosswise [1200 x 600dpi] (ineo 213)

7 ppm A3 (ineo 163) 12 ppm A3 (ineo 213)

PRINT RESOLUTION 600 x 600dpi (enhanced 1200 dpi)

MAX PRINTABLE AREA Void area of 4 mm on all edges

PDL PCL5e/PCL6

PRINT RAM 32MB std. (max. 160MB) shared with the engine

PRINT HDD No

FONTS Download True type and bitmap font, standard 45 scale fonts and 8 line printer font

INTERFACE

Parallel No Yes (IEEE1284)

USB 2.0 Yes (Hi Speed)

10/100BaseT Yes (standard with IC-206)

PROTOCOLS

Nibble/ECP No/ No

EtherTalk No

IPX/SPX Yes

TCP/IP Yes

SNMP Yes

SMTP/POP3 Yes/Yes

HTTP Yes

16


PROTOCOLS

Netware Yes

NDPS Yes

Ipd Yes

IPP No

Apple Talk No

SUPPORT OS Windows 98SE/Me/2000/XP/2003 Server (Vista 10/07)

UTILITIES

NMU Yes

Web Connection Yes

Network Setup Yes

NDPS Gateway Yes

EMS Plug-ins Yes

Workware Demo No (Workware optional)

17


FEATURE LIST

Booklet Creation No

Chapter Insertion No

Continuous Number Stamping No

Cover Mode Yes

Date Stamp No

Distribution Numbering No

Edge / Frame Erase No

Image Insertion No

Image Repeat No

Image Shift No

Image Rotation No

Job Accounting No

Non-Image Area Erase No

OHP Interleaving No

Overlay No

Page Insertion No

Page Stamp No

Test Print (Proof Print) Yes

Stamp No

Watermark Yes

N-up/Fit to Paper/Scaling Yes (2, 4, 6, 9, 16-up) / yes / yes

Lock Job Yes (128 MB memory required)

Two-way communication(automatic configuration in driver) No

18


FEATURE LIST cont.

Transmit Once Print Many No

RIP Once Print Many Yes.

All Raster / Download as bitmap Yes

WHQL Yes

FINISHING

Sorting Yes, electronic sort function

Stapling No

Punching No

Folding No

Cover Insertion No

Trimming No

19


SSccaannnneerr SSppeecciiffiiccaattiioonnss SCAN FUNCTIONS

Twain Scan Yes (Standard)

Scan to FTP Yes (with NC-503 or IC-206)

Scan to HDD (Scan to Mailbox) No

Scan to E-mail Yes (with NC-503 or IC-206)

Scan to URL No

Scan to iFAX Yes (with FK-506 and NC-503 or IC-206)

Scan to IP Scanner (Direct send to PC) No

SCAN BASICS

Scan Speed (with ADF)ineo 163 with DF-502: 16 opm ineo 213 with DF-502: 16 opm ineo 213 with DF-605: 20 opm

Paper Size A5 – A3

Colour Scanning Capability No

Separate Scan Counter Yes (Separated from Copy and Fax scan)

Scan Format TIFF, PDF

Coding (Compression) MH, MR, MMR

One Touch Key Yes (Max. 32)

Group send (Broadcast) Yes, 32 groups (Max. 50 destinations)

NETWORK TWAIN

Client OS Yes (with NC-503 or IC-206)

SCAN TO EMAIL

Protocol SMTP

Resolution 150x150dpi, 300x300dpi, 600x600dpi

Max. destinations 240

Image division Yes

20


SCAN TO FTP

Protocol FTP Client

Resolution 150x150dpi, 300x300dpi, 600x600dpi

Max. destinations 10

SCAN TO iFAX (e-mail / LAN-FAX)

Protocol SMTP, POP3

Paper Size A4 (advanced mode: B4, A3)

Resolution 204x98dpi, 204x196dpi (Advanced mode : 204x392dpi)

ENHANCED FEATURES

LDAP No

User Authentication for Scan-to-FTP Yes

UTILITIES

Workware Demo No (Workware optional)

IP Scanner(Utility for Direct Scan to PC) No

Network FAX (PC FAX utility) Yes (Unimessage PRO and I-NetPortal)

21


FFaaxx SSppeecciiffiiccaattiioonnss GENERAL DATA

Min Transmission Time (seconds) < 3 Sec. ITU-T V.34,JBIG (ITU No. 1)

Max. Modem Speed / Compatibility 33,6 kbps / ECM, Super G3

Coding / Error Correction (ECM) MH, MR, MMR, JBIG / ECM

Document Memory, Byte (max pages) 32 Mbyte, 280 Pages (ITU No 1)

Memory Battery Buffered 10 hours

Dual Access (2 ch) No

Dual Line No

Remote Installation/Diagnostic Yes

Display/ Error Indicator Yes

LSD/RSD Yes/Yes

DIALING

Max. Numbers Stored 272 (32 as one touch dial, 240 as speed dial)

Max. Phone Digits 30

Program Keys 4

Group Setting (max.) Yes, 32 (max. 50 destinations)

Tone/Pulse Select Yes

PSTN-access by No/Flash Yes

Sub addressing Yes

Auto Redial/Last Number Redial Yes / Yes

Electronic Telephone Book Function Yes

Monitor Speaker Yes

22


TRANSMISSION/INPUT

Transmission Resolution

Std: 8 x 3.85 line/mm FINE: 8 x 7.7 line/mm S-FINE: 8 x 15.4 line/mm S-FINE: 16 x 15.4 line/mm (ineo 213 ADF TX)

Effective Scanning Width Erase 2mm (According to detected size or user selection)

Max. Size FBS (W x L) 303mm+/- 1% x 1000mm

Halftones Yes

Number of Timers Depends on memory and file (1024 files)

Storable TX Jobs Depends on memory and file (1024 files)

ADF/Memory Transmission Yes / Yes

Book Transmission Yes

Header Line Yes

Stamp Function No

Department Management No

Authorised Transmission (by PIN code) Yes

Closed Network/ Protected TX No

Quick Memory Transmission Yes

Batch Transmission Yes

Priority Transmission No

2-to-1 Transmission No

2-Sided Transmission No

Mailbox Transmission Command Yes

Cover Page Function No

Max. Broadcasting Locations 243

Relay Broadcasting Yes, 50 destinations

Relay Broadcast Command Yes

23


RECEIVING/OUTPUT

Receiving Resolution Up to 408 x 392 dpi

Effective Print Width (fax mode) Erase 4mm from both edges

Smoothing Yes

Auto/Manual Reception Yes

Storable RX Jobs Depends on memory and files (1024 files)

Reduction in Fax Mode Yes

Paper source selection Yes

Receiving/Output Tray Selection No

Memory Receiving Yes

Footer Print Yes

Closed Network RX/ Protected RX Yes

2 to 1 Receiving No

Duplex Reception No

RX-Memory Print by Password Yes

Forward Function Yes

Mailbox Receiving (ITU-T) Yes

Max. Polling Locations 243

Selective/Protected Polling Yes

24


REPORTS AND LISTS

Telephone List Yes

Key Setting List Yes

Transmission Report Yes

Reception Result Report Yes

Reservation Report Yes

Relay Broadcast Report Yes

Error Report Yes

Machine Status List Yes

Journal (max. 60 communications) Yes

Consumable Order Report Yes (name is changed to “Service Report”)

Memory Data List/Print Yes

Power/Backup-RAM Error Report Yes

User/Department Management List No

Note: Specification may vary due to national PTT regulations

25


IInntteerrnneett FFaaxx

Transmission Protocols TCP/IP, SMTP, POP3

Transmission Mode Simple mode

Original Size A3, B4, A4

Paper Size Max. A3

Resolution for Sending 204 x 98dpi, 204 x 196dpi, 204 x 391dpi

Resolution for Receiving 200 x 100dpi, 200 x 200dpi, 204 x 98dpi, 204 x 196dpi, 204 x 391dpi, 408 x 391dpi

Data Format TIFF-F

Compression MH, MR, MMR

Note: In order to utilize Internet Fax either the Fax Kit FK-506 + the Network Card NC-503 or the Fax Kit FK-506 + the Image Controller IC-206 are required.

26


CCoonnssuummaabblleess

TONER

Name Toner TN114

Concept Toner Bottle

Weight 413 g

Yield 11 k (6 % coverage, 2 pages per job) each bottle

Units per carton 2 bottles

DEVELOPER

Name Developer DV110

Contents of one unit 200 g

Yield 40 k

Sales Unit 1 bag

Remark One bag is included in the machine

PC - DRUM

Name PC Drum DR114

Yield 40 k

Disposal Household waste or return to the manufacturer for disposal

Remark One drum is included in the machine

27


AArrttiiccllee NNuummbbeerrss

MACHINE Article Number

ineo 163 A09A121

ineo 163 (120V) A09A1P1

ineo 213 A08E121

ineo 213 (120V) A08E1P1

ACCESSORIES Article Number Compatibility

Automatic Document Feeder DF-502 4688625 ineo 161/210

Duplexing Document Feeder DF-605 4344715 ineo 210/250/350

DF-605 Mount Kit MK-501 4048621 ineo 210

250 sheets Paper Feed Unit PF-502 4686625 ineo 161/210

Multi Bypass Tray MB-501 4687625 ineo 161/210

Automatic Duplex Unit AD-504 4532625 ineo 210

Shift Tray SF-501 4690625 ineo 161/210

Job Separator JS-503 4689625 ineo 161/210

Image Controller (PCL) IC-206 A0CJ121 no

Network Card NC-503 A0CJ122 no

Fax Kit FK-506 A0CJ123 no

Memory Enhancement (128 MB) EM-103 (Copier/Print/Fax) A0CJWY1 no

Mechanical Counter MC-503 4623478 ineo 161/210

Key Counter Mount Kit 2 4623471 ineo 161/210

Original Cover OC-504 4625187 ineo 210

SCD-21 Large (Simple Copy Desk) 9960700000 ineo 161/210

SCD-21 Small (Simple Copy Desk) 9960690000 ineo 161/210

SCD-21 Stand 9960710000 ineo 161/210

28


ADDITIONAL ACCESSORIES for the ineo 163/213 with FK-506/NC-503 Article Number Compatibility

Unimessage Pro single user on demand (4968332) ineo 161/210

Unimessage Pro 5-users on demand (4968342) ineo 161/210

I-Net Portal on demand (1418401) ineo 161/210

CONSUMABLES

Toner TN114 8937786 ineo 161/210

Developer DV110 8936491 ineo 161/210

PC Drum DR114 4021029801 ineo 161/210

29


SSeerrvviiccee PPaarrtt Installation

Flowchart

In order to perform the installation process of ineo 163/213 in the most efficient way, it is recommended to

follow the flowchart below. All reported installation times are related to this process.

Installation time Name Article No. Total time Copier main body 15 min MK-501 (required for DF-605) 4048621 12 min DF-502 4688625 17 min DF-605 (ineo 213 only) 4344715 25 min PF-502 4686625 5 min MB-501 4687625 15 min AD-504 (ineo 213 only) 4532625 20 min FK-506 A0CJ123 14 min NC-503 (not in combination w. IC-206) A0CJ122 9 min IC-206 (not in combination w. NC-503) A0CJ121 12 min JS-503 4689625 12 min SF-501 4690625 10 min

Either Stand, Copy Desk small or Copy Desk large is used

Outline of Installation Procedure for ineo 163/213 System

NC-503

FK-506

EM-103

IC-206 or

30


Maintenance Firmware Upgrade

In the past, it was uncommon for machines of segments 1 and 1a to use Flash ROM technology. In these

segments EEPROM technology was mainly used. This was an inflexible way to go because a simple firmware

update could usually not be performed easily. And if so, a second customer visit was often necessary.

Since there are more and more notebooks used in the field, it seemed plausible to also use them for firmware

update procedures. The first way is to use an USB 1.1 compatible interface and the Windows operation

systems Win98/ME or Windows2000/XP, because neither Windows95 nor NT4.0 provide a default USB

compatibility.

Another way to update the firmware of the fax version is to use RSD. For details regarding this Remote

Software please refer to Remote Setup & Diagnostic. The third way to update the firmware is to use a ineo 163/213 connected to another ineo 163/213. In that case, the machine with the newer firmware can “call” the

other and update the firmware using the telephone connection.

Check the display for the progress of updating

31


PM Time PM Parts Maintenance Time

PC Drum Unit Replace 00:38 sec.

Drum Charge Unit Replace 01:15 sec.

Cleaning Blade Replace 01:02 sec.

Developer Replace 10:32 sec.

Pick-up Roller Replace 01:37 sec.

Friction Roller Assy Replace 01:09 sec.

Transfer Roller Replace 00:26 sec.

Fusing Unit Replace 08:23 sec.

Ozone Filter Replace 01:38 sec.

Roll at Developing Roller Cleaning 01:02

Regulating Plate Cleaning 01:24 sec.

Upper Guide Plate Cleaning 01:00 sec.

Separator Cleaning 02:06 sec.

Cleaning Pad at Upper Transport Roller Cleaning 04:32 sec

32


CM Time

Section CM Parts Time

Resist Sensor 06:39 sec.

Main Motor 02:32 sec.

Paper Empty Sensor 01:45 sec.

Neutralizing Sheet 03:30 sec.

Transportation Cover Exhaust Fan 07:34 sec.

Paper Empty Sensor (at additional cassette) 04:56 sec.

PWB-A 07:59 sec.

C/C Board 10:20 sec.

Resist Clutch 02:30 sec.

Pick-up Drive Solenoid 03:06 sec.

Scanner Driver Motor 06:25 sec.

Toner Replenishment Motor 09:34 sec.

Toner Replenishment Sensor 09:55 sec.

P/H 14:21 sec.

PWB-RY 13:01 sec.

Power SW 06:33 sec.

Front Cover Detection SW (S3) 11:40 sec.

Front Cover Detection SW (S4) 11:40 sec.

Original Detection Sensor 04:25 sec.

HV-1 10:01 sec.

Power Supply 22:37 sec.

Power Supply Fan 19:35 sec.

Main Body

Paper Size SW 06:00 sec.

33


Section CM Parts Time

Paper Size Detection SW 06:00 sec. PWB-I (Paper Size Detection Board) 04:37 sec.

Operation Panel 01:22 sec. CCD Unit 04:29 sec.

Exposure Lamp 06:54 sec. Exposure Lamp Inverter 06:38 sec.

Original Size Detection Sensor 02:34 sec. ATDC Sensor 01:14 sec.

Upper Fusing Roller 12:21 sec. Lower Fusing Roller 29:29 sec.

Thermistor 25:02 sec Fusing Section JAM Detection Sensor 29:51 sec.

Main Body

Thermostat 11:03 sec. Paper Size Detection Sensor 09:32 sec.

Bypass Feed Pick-up Drive Solenoid 07:43 sec.

JAM Sensor 04:32 sec. Duplex PWB 02:15 sec. Duplex Unit

Duplex Drive Motor 01:40 sec. Main PWB 05:10 sec.

Cooling Fan Motor (M3) 04:26 sec. PC7 (Upper Cover Sensor) 01:40 sec.

PC5 (Original Empty Sensor 01:29 sec. PC6 (Separator Sensor) 02:00 sec.

DF-502 PBA-SIZE (Mixed Original Detection Board) 01:50 sec.

Section CM Parts Time SL1-ADF (Exit Separation SL) 02:00 sec.

PBA-LED 01:42 sec. PBA-VR (Original Size Detection VR [width direction]) 10:22 sec.

PC2 (Original Size Detection Sensor 2) 05:53 sec. PC1 (Original Size Detection Sensor 1) 05:40 sec. PC3 (Original Size Detection Sensor 3) 05:40 sec. PC4 (Original Size Detection Sensor 4) 05:40 sec.

M1-ADF (Pick-up Drive Motor) 14:58 sec. M2-ADF (Transportation Motor) 13:53 sec. PC8 (Original Detection Sensor) 24:21 sec.

PC9 (Resist Sensor) 23:41 sec.

DF-502

PC10 (Exit Sensor) 23:41 sec. Main Motor 01:54 sec. Main PWB 02:19 sec.

Pick-up Drive Clutch 03:16 sec. Original Empty Sensor 03:59 sec.

Resist Sensor 03:59 sec. Separator Sensor 03:59 sec.

Exit Sensor 03:59 sec. Original Size Detection Sensor (Long Direction) 03:27 sec.

DF-605

Original Size Detection Sensor (Width Direction) 05:02 sec.

34


Periodical Replacement Parts Spare Parts Article No. Replacement after

(K) copies

PC Drum Unit 4021 – 0297 - 01 40 K

Cleaning Blade 40 K

Drum Charge Unit 40 K

Developer 8936 - 488 40 K

Cleaning Pad (at Upper Transport Roller) 40 K

Pick-up Roller 150 K

Friction Roller Assay 150 K



Friction Roller Assay 150 K

Transfer Roller Unit 150 K

Fusing Unit 150 K

Ozone Filter 150 K

35


AAppppeennddiixx

Different cassette configurations

ineo 163 / 213 with: Copy Desk Large & 1 x PF-502

ineo 163 / 213 with: Copy Desk Small & 2 x PF-502

ineo 163 / 213 with: Stand & 4 x PF-502

ineo 163 /213 with: Copy Desk Small & 3 x PF-502

36


List of functions and necessary options

FK-506 NC-503 IC-206 UMP/ I-NetP٭ AD-504 PF-502 MB-501 SF-501

Copier

Double-sided copies --- --- --- --- --- --- ---

Electronic sorting --- --- --- --- --- --- --- ---

Crisscross sorting --- --- --- --- --- ¹ ¹ ---

Shift sorting --- --- --- --- --- --- ---

Printer

Local GDI print --- --- --- --- --- --- --- ---

Network GDI print --- --- --- --- --- --- ---

Network PCL print --- --- --- --- --- --- ---

Scanner

Local TWAIN --- --- --- --- --- --- --- ---

Network TWAIN --- ² ² --- --- --- --- ---

Scan to e-mail/FTP --- ² ² --- --- --- --- ---

Fax

Super G3 fax --- --- --- --- --- --- ---

Internet fax ² ² --- --- --- --- ---

PC-fax ² ² --- --- --- --- UMP >> UnimessagePro (٭ I-NetP >> I-NetPortal ¹) just one of the option is required ²) Either or, they can’t be used together because a NIC is also included in IC-206.

37


Multi Task Capability

Copy Print Fax Scan

Scanning Copying Data Receiving Printing Trans-

mission Recep-

tion Scanning Data Sending

Scanning Yes Yes Yes Yes Yes No Yes

Cop

y

Copying Yes Yes No Yes Yes Yes Yes

Data Receiving Yes Yes Yes Yes Yes Yes Yes

Prin

t

Printing Yes No Yes Yes Yes Yes Yes

Trans-mission Yes Yes Yes Yes No Yes Yes

Fax

Recep-tion Yes Yes Yes Yes no Yes Yes

Scanning No Yes Yes Yes Yes Yes Yes

Scan

Data Sending Yes Yes Yes Yes Yes Yes Yes

Remark: For GDI version it can not print data during both, copying and fax reception. Also it can not copy during receiving print data.

38


Compatibility

Model Name Description ineo 161 ineo 210 ineo 163 ineo 213

DF-502 Automatic Document Feeder

DF-6051) Duplexing Document Feeder --- ---

MK-501 Mount Kit for DF-605 --- ---

PF-502 Paper Feed Unit

MB-501 Multi Bypass

JS-503 Job Separator

SF-501 Shift Tray

AD-504 Auto Duplex Unit --- ---

OC-504 Original Cover Std. Std.

IC-205 Image Controller --- ---

IC-206 Image Controller --- ---

NC-502 Network Card --- ---

NC-503 Network Card --- ---

SU-502 Scanner Unit --- ---

FK-505 Fax Kit --- ---

FK-506 Fax Kit --- ---

EM-101 32 MB Expanded Memory --- ---

EM-102 64 MB Expanded Memory --- ---

EM-103 128 MB Expanded Memory --- --- SCD-21 Large Simple Copy Desk Large

SCD-21 Small Simple Copy Desk Small

SCD-21 Stand Stand

39


Compatibility cont..

Model Name Description ineo 161 ineo 210 ineo 163 ineo 213

MC-503 Mechanical Counter


Unimessage Pro

Unimessage Pro I-net portal

DR114 Drum (Yield 40 k)

DV110 Developer (Yield 40 k)

TN114 Toner (Yield 2x11 k)

Note: ¹) DF-605 can also be used for ineo 250/350

What is delivered with the machine?

ITEMS Packed in Japan

Packed in Japan

Added in Europe

Added in Europe

ineo 163 ineo 213 ineo 163 ineo 213

PC Drum Yes Yes --- ---

Toner No No --- ---

Starter Yes Yes --- ---

Feeder No No --- ---

Original Cover Yes No --- ---

Copy Tray N/A N/A --- ---

User Manual --- --- Yes Yes

Face Sheets English English Yes Yes

40


Note! Since changes in technical features are the order of the day in the world of digital copiers and printing technology, please note that the technical data provided in this material was issued in May 2007. We reserve the right to make changes to the technical design. Specifications refer to maximum performance under standard conditions. No guarantee is provided in relation to any of the data supplied. Your Develop Marketing

www.develop.de

Documents

Product Guide Ineo 163_213