PRODUCT GUIDE 2012 · 2017-08-18 · 2 Flush44 Cubicle Range About Us 3 Flush44 4-5 T-Line 6-7 Senator 8-9 Skyline 10-11 Hydroline 12-13 Mariner 14-15 Select 16-17 Entasis 18-19 Classik

CUBICLE & WASHROOM SPECIALISTS

www.excelsior-cubicles.co.uk

PRODUCT GUIDE 2012

2 Flush44 Cubicle Range

About Us 3

Flush44 4-5

T-Line 6-7

Senator 8-9

Skyline 10-11

Hydroline 12-13

Mariner 14-15

Select 16-17

Entasis 18-19

Classik 20-21

Option 22-23

Harlequin 24-25

Harlequin Peardrop 26

Vanity Units 27-29

Duct Panelling 30-31

Healthcare Duct Panelling 32-33

Lockers 34-35

Bench Seating 36-37

Accessories 38-43

Contents

Cubicle & Washroom Specialist 3

from creation to installation... you can rest assured

At Excelsior, we have undertaken the manufacture, supply and installation of bespoke washroom

products in all washroom environments since 1978. We have an extensive selection of WC and

changing cubicles, duct panelling and vanity unit systems to suit all environments; from schools to

office developments, leisure centres to hospitals we have a solution to your requirements.

About Us

All levels of durability are catered for to meet our

client’s specification requirements and commercial

constraints, always combining innovation with

practicality.

With a combined factory, office and showroom

space of some 30,000 sq. Feet, and the latest in

production machinery we are continually striving to

meet and exceed all of our client’s expectations.

Dedicated and professional teams of Sales

Estimators, CAD Draughtsmen and Contracts Staff

are readily available to provide technical assistance

and guidance through our product ranges relative to

individual project needs.

Furthermore, we offer an installation service were

we survey and manage the on-site process. Our

experienced site fitting teams are fully trained and

equipped with trade specific CSCS cards to ensure

that our products are installed to the quality

standards to meet our client’s expectations.

The Flush44 cubicle range is the genuine 'premium quality' system, offering a sleek flush

fronted facade, and with surface finishes available in both HPL and Natural Veneer,

allowing the the most discerning specifier complete satisfaction in their selection.

Flush44

2 3 41

1. Indicator Thumbturn

2. Hinge Knuckle

3. Indicator Face Plate

4. Stainless Steel D Handle

Office HQ, Leicestershire

4 Flush44 Cubicle Range

The premium flush fronted cubicle solution.


44 Flush Cubicle - Floor to Ceiling

Doors and Pilasters:• HPL bonded onto 44mm MR core

• Rebated Hardwood Edges, sealed 2 coats AC Lacquer

Divisions Specification:• High Pressure Laminate bonded onto 36mm MR core

• Matching laminate edge detail

Standard Dimensions:• UPTO 2400mm overall height x 1500mm‐2000mm deep

(horizontal joint to suit)

Ironmongery:• Continuous 'T' section Pilaster fixing channel

• 11/2 pairs Self Closing Butt Hinges

• Recessed Deadbolt, Indicator and Keep

Ref: T209/F1 and A9706S

• 38mm 'U' section floor channel

• Coat Hook - Ref:T501

• Rear wall 'T' section division fixing channel

• Continuous Floor 'U' section division fixing channel

(Excludes Toilet Roll Holder)

44 Flush Cubicle - 2100mm High

Doors and Pilasters• HPL bonded onto 44mm MR core - 1962mm panel height

• Rebated Hardwood Edges, sealed 2 coats AC Lacquer

Divisions Specification:• HPL bonded onto 18mm MR core 1962mm panel height

• Matching laminate edge detail

Standard Dimensions:• 2100mm overall height (100MM LEG) x 1500mm - 2000mm deep

(horizontal joint to suit)

Ironmongery:• Continuous 'T' section Pilaster fixing channel

• 11/2 pairs Self Closing Butt Hinges

• Recessed Deadbolt, Indicator and Keep

Ref: T209/F1 and A9706S

• 38mm 'U' section Headrail

• Coat Hook - Ref:T501

• Rear wall 'T' section division fixing channel

• Leg - Ref:T311


Flush44 - Typical Layout & Specification Options

Ironmongery Finish: Satin Stainless Steel as standard

Colour Selections: Excelsior Prefered Cubicle & Washroom Colour Selection

Special Notes: UPTO 2700mm overall height available at additional cost

Outward openg doors complete with back to back Stainless Steel 'D' Handles

We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.

T-Line

2 3 41

1. Headrail Junction Detail

2. SAA Indicator Faceplate

3. Outward Open Pivot Hinge

4. SAA Leg

Office HQ, Leicestershire

6 T-Line Cubicle Range

The modern & minimalist cubicle solution.The T-Line cubicle range has been created to meet the most discerning specifiers’

requirements. Bringing a modern feel to the washroom environment in the form of Extruded

Satin Anodised Aluminium pilasters and headrail offering a true slimline appearance.


T LINE 30mm HPL CUBICLES

Pilasters and Headrail:• Extruded SAA Aluminium Profiles ‐

T Pilasters/U Headrails

Doors & Divisions Panel Specification:• Doors ‐ HPL bonded onto 30mm MR core

• Divisions ‐ HPL bonded onto 18mm

MR core

• 2mm PVC edge finish

Standard Dimensions:• 2090mm overall height (including

150mm ground clearance) x 1500mm ‐

2000mm deep

Ironmongery:• Rise & fall aluminium hinges ‐ Ref: EXCH20

• Pivot Hinge to outward opening doors

• Recessed Indicator & Keep ‐ Ref: EXL30

• Leg 150mm ‐ Ref: EXLEG/11

• Coat Hook ‐ Ref:EXCOAT20

• Brackets ‐ Ref: EXB3/5


T LINE 12mm COMPACT CUBICLES



Doors & Divisions Panel Specification:• 12mm compact solid grade laminate

• Black core radius & polished edge finish



2000mm deep

Ironmongery:• Rise & fall aluminium hinges Ref: EXCH13





• Brackets ‐ Ref: EXB3/7 and EXB3/8


T LINE 19mm MFC CUBICLES



Doors & Divisions Panel Specification:• 19mm Melamine Faced Chipboard




2000mm deep

Ironmongery:• Rise & fall aluminium hinges ‐ Ref: EXCH20





• Brackets ‐ Ref: EXB3/5


T-Line - Typical Layout & Specification Options

Ironmongery Finish: Satin anodised aluminium as standard (powder coated available at additional cost).

Full Height option available upon request (up to 3000mm).

Colour Selections: Excelsior Prefered Cubicle & Washroom Colour Selection.

Special Notes: Outward opening doors complete with back to back St/Steel 'D' Handles and full length 'Z' Section door Stop/Keep.


The Senator range is a perfect solution where the client requires a ‘touch of class’ and is

equally at home in all environments ranging from prestigious office developments, schools,

colleges and leisure facilities.

Senator

2 3 41

1. Headrail Junction Detail


3. SAA Indicator & Keep

4. D Handle

Co-op Distribution Centre, Andover

8 Senator Cubicle Range

An elegant & prestigious framed system.


Senator 12mm Compact Cubicles

Pilasters & Headrail:• Elliptically profiled Extruded Aluminium

powder coat finished: select from

• Thorium, Titanium, Radon or Antique Silver

Doors & Divisions Panel Specification:• 12mm compact solid grade laminate


Standard Dimensions:• 2000mm overall height (including 150mm

ground clearance) x 1500mm - 2000mm

deep

Ironmongery:• Rise & fall aluminium hinges

Ref: CL13HID(2)

• Indicator & Keep - Ref: EXL13

• Leg 150mm - Ref: CLEAR2/7COMP

• Coat Hook - Ref:CLEAR13CH

• Brackets - Ref: SGL WM3/7 Pack


Senator 20mm HPL Cubicles




Doors & Divisions Panel Specification:• HPL bonded onto 18mm MR core




deep

Ironmongery:• Rise & fall aluminium hinges

Ref: CL21HID(2)

• Indicator and Keep - Ref: EXL20



• Brackets - Ref: WM3/5 Pack


Senator 19mm MFC Cubicles




Doors & Divisions Panel Specification:• 19mm Melamine Faced Chipboard




deep

Ironmongery:• Rise and fall aluminium hinges

Ref: CL21HID(2)

• Indicator and Keep - Ref: DL320O



• Brackets - Ref: WM3/5 Pack


Senator - Typical Layout & Specification Options

Ironmongery Finish: Powder coated to match pilasters and headrail.


Special Notes: Outward opening doors complete with back to back St/Steel 'D' Handles and full length 'Z' Section door Stop/Keep


Meeting the demands of modern education and mixed use environments, Skyline is a floor

to ceiling system providing the user with maximum privacy and comfort. A full range of

complimentary duct panels and vanity units are available on request.

Skyline

2 3 41

1. Indicator & Keep

2. Pilaster Floor Channel

3. Indicator Face Plate

4. Inside Cubicle View

Holly Lodge School, Birmingham

10 Skyline Cubicle Range

The elegant & discreet full height system.


Skyline 12mm SGL Cubicles

(Floor to ceiling)

Doors, Divisions & Pilasters

Panel Specification:• 12mm compact solid grade laminate


Standard Dimensions:• 2600mm (max.) floor to ceiling height

x 1500mm - 2000mm deep


Ref: EXCH13

• Recessed Indicator and Keep

Ref: EXL13

• Leg 150mm - Ref: EXLEG/11

• Coat Hook - Ref:EXCOAT13

• Brackets - Ref: EXB3/7 & EXB3/8

• Headrail - Ref: P12/P15


Skyline 20mm HPL Cubicles

(Floor to ceiling)


Panel Specification:• HPL bonded onto 18mm MR core





Ref: EXCH20


Ref: EXL20



• Brackets - Ref: EXB3/5



Skyline 19mm MFC Cubicles

(Floor to ceiling)


Panel Specification:• 19mm Melamine Faced Chipboard





Ref: EXCH20


Ref: EXL20






Skyline - Typical Layout & Specification Options




Partitions are supplied in 2 pieces to meet CDM/Manual Handling constraints.

Partitions fitted into floor fixed U channel and finished 10mm below ceiling. Headrail detail fitted to top of pilaster internal face.

Pilaster fitted into 12mm profiled floor channel.

3000mm overall height available at additional cost (Subject to colour selection).


Hydroline Cubicles - The only choice for the serious leisure operator, cost effective, low

maintenance, long life span (in excess of ten years) and above all good looks. Designed for

use in demanding municipal changing areas, washrooms and public toilets

Hydroline

2 3 41

1. Leg & Hinge Details

2. Indicator Faceplate

3. Headrail Endcap

4. D Handle

Bilston Leisure Centre, West Midlands

12 Hydroline Cubicle Range

Robust high performance self supported system.


Hydroline Tubular Framed 12mm SGL Cubicles

Doors, Divisions & Pilaster Infils Panel Specification:• 12mm compact solid grade laminate


Standard Dimensions:• 1980mm overall height (c/w 150mm leg) x 1500mm

• Increased height radius profiled divisions (upto 2600mm high) available at additional cost

Framework Detail:• Hydroline is a fully framed tubular system manufactured from non-corrosive materials suitable for wet and dry areas.

Framework Colour Options:• RAL 9016 White; RAL 9001 Pearl White; RAL 9011 Black; RAL BS; 00A05 Steel Silver

Ironmongery:• Rise and fall extruded channel continuous hinge

• Snib Turn Indicator and Keep

• Pilaster extrusion incorporating 150mm Leg

• Coat Hook

• Continuous wall channel Brackets

• Headrail

• Headrail End Caps


Hydroline - Typical Layout & Specification Options

Ironmongery Finish: RAL 9016 White; RAL 9001 Pearl White; RAL 9011 Black; RAL BS; 00A05 Steel Silver


Special Notes: Outward opening doors complete with back to back St/Steel 'D' Handles.

Increased height radius profiled divisions (upto 2600mm high) available at additional cost


The Mariner Range is ideal for harsh environments utilising vandal & water resistant

compact solid grade laminate. Multiple hardware options offer greater design flexibilty.

The Mariner range offers an extended life cycle under usage conditions.

Mariner

2 3 41

1. SAA Headrail & End Cap



4. SAA Leg

Alexander Stadium, Birmingham

14 Mariner Cubicle Range

Hard wearing resistant & durable cubicle system.


Mariner 12mm SAA Compact Cubicles

Doors, Divisions & Pilasters Panel Specification:• 12mm compact solid grade laminate


Standard Dimensions:

Option A: 2050mm overall height (c/w 150mm leg)


Option B: 1950mm overall height (c/w 150mm leg) x 1500mm deep

All Heights Subject to Material/Colour Selection

SAA Ironmongery:• Rise and fall aluminium hinges - Ref: EXCH13

• Recessed Indicator and Keep - Ref: EXL13



• Brackets - Ref: EXB3/7 and EXB3/8

• Headrail - Ref: EXPHR13

• Headrail End Caps - Ref: EXHREND


Mariner 12mm Stainless Steel Compact Cubicles

Doors, Divisions & Pilasters Panel Specification:• 12mm compact solid grade laminate



Option A: 2050mm overall height (c/w 150mm leg)


Option B: 1950mm overall height (c/w 150mm leg) x 1500mm deep


Stainless Steal Ironmongery:• Rise & fall aluminium hinges - Ref: T100 L or T100 R

(to suit handing)

• Indicator and Keep - Ref: T201L or T201R / keep T250/buffer T950

• Leg 150mm - Ref: T300

• Coat Hook - Ref: T520

• Brackets - Ref: T410




Mariner - Typical Layout & Specification Options

Ironmongery Finish: As specification options above.




Woodgrain Doors Max. 1960mm overall height (incl. 150mm grd. Clearance)


The Select Range is a tried and tested cubicle system comprising of high pressure laminate

faced components, incorporating Excelsior's own Satin Anodised Aluminium range of

Ironmongery as standard.

Select

2 3 41




4. SAA Leg

Sandwell College, West Midlands

16 Select Cubicle Range

An efficient, practical & robust cubicle system.


Select 20mm HPL Cubicles

Doors, Divisions & Pilasters Panel Specification:• High Pressure Laminate bonded onto 18mm MR core


Standard Dimensions:• 2050mm overall height (including 150mm ground clearance) x 1500mm - 2000mm deep


Ironmongery:• Rise and fall aluminium hinges - Ref: EXCH20








Select - Typical Layout & Specification Options

Ironmongery Finish: Satin anodised aluminium as standard, powder coated (available at additional cost).





The Excelsior Entasis cubicle range utilises the inclusion of satin anodised aluminium,

extrusions vertically fixed to the cubicle pilasters for additional strength and protection.

Ideal for use in high volume traffic areas.

Entasis

2 3 41




4. SAA Leg

18 Entasis Cubicle Range

The cubicle system built for hard knocks.


Entasis - Typical Layout & Specification Options

Entasis 12mm SGL Cubicles

Framework & Headrail• SAA D section headrail extrusion

• SAA P section pilaster frame extrusion

Doors, Divisions & Pilaster Infills



Standard Dimensions:• 2050mm overall height (c/w 150mm leg)



Ref: EXCH13


Ref: EXL13



• Brackets - Ref: EXB3/7 & EXB3/8


Entasis 20mm HPL Cubicles




Panel Specification:• High Pressure Laminate bonded onto

18mm MR core





Ref: EXCH20


Ref: EXL20





Entasis 19mm MFC Cubicles




Panel Specification:• 19mm Melamine Faced Chipboard





Ref: EXCH20


Ref: EXL20






Colour Selections: Excelsior Polyrey Cubicle & Washroom Colour Selection




The Classik Range is ideal for office environments, the system incorporates post formed

laminate pilasters providing an aesthetically pleasing smooth and sleek appearance.

Suitable for medium dry use environments.

Classik

Offices, Stratford Upon Avon

20 Classik Cubicle Range

The stylish & sophisticated cubicle solution.

2 3 41




4. SAA Leg


Classik HPL Cubicles

Door & Division Panel Specifications:• High Pressure Laminate bonded onto 18mm MR core


Panel Specification:

Pilaster Panel Specifications:• High Pressure Laminate bonded onto 28mm MR core

• Postformed Vertical Edges

Standard Dimensions:• 2050mm overall height (including 150mm ground clearance) x 1500mm - 2000mm deep










Classik - Typical Layout & Specification Options






The Option Range is one of Excelsior’s most popular and long standing cubicle systems,

utilising 19mm melamine faced chipboard offering a price economy to suit all budgets.

Suitable for light to medium use environments.

Option

2 3 41

1. Option Headrail

2. Option Indicator Faceplate

3. Option U Bracket

4. Option Leg

Office Development, Birmingham

22 Option Cubicle Range

The clean, economic & versatile cubicle system.


Option 19mm MFC Cubicles

Doors, Divisions & Pilasters Panel Specification:

• 19mm Melamine Faced Chipboard

• Matching or contrasting 2mm PVC edge finish


• 2050mm overall height (including 150mm ground clearance) x 1500mm - 2000mm deep

Ironmongery:

• Rise and fall aluminium hinges - Ref: EXCH20

• Indicator and Keep - Ref: BH1-1




• Headrail - Ref: 20mm 'L' Section


Option - Typical Layout & Specification Options





Excelsior’s flexible children’s cubicle range. Available in various design options to suit any

budget for school and nursery environments. Specifically designed with children in mind,

the low level profiled curves to the doors and partitions enable adult supervision.

Harlequin

24 Harlequin Cubicle Range

The practical vibrant & versatile children’s range.

2 3 41




4. SAA Leg


Panels: Doors, Pilasters and Divisions• 12mm Compact Solid Grade Laminate


Standard Dimensions:• Pilasters 2050mm overall height inc.150mm floor clearance

• 1500mm-1800mm deep

Profiles:• Doors - Curved tops at low level height.

• Partitions - Sloping to low level at rear wall.

Recommended Low Level Heights:• Nursery (Pre-School) - 1350mm FFL

• Key Stage 1 (Age 5-7; Years 1 & 2) - 1500mm FFL

• Key Stage 2 (Age 7-11; Years 3, 4, 5 & 6) - 2050mm FFL

• Key Stages 3 &4 (Age 11-16) - 2050mm FFL





• Brackets - Ref: EXB3/7 and EXB3/8




Ironmongery & Headrail Finish:• Satin Anodised Aluminium as standard.

• Red, Yellow or Blue powder coat finish at additional cost

Colour Selection:• Excelsior Prefered Cubicle & Washroom Selection

• Digital print designs available at extra cost.

Harlequin Mariner Cubicle Range

Panels: Doors, Pilasters and Divisions• Laminated 18mm MR MDF

• All edges are lipped in high impact 2mm PVC

Standard Dimensions:• Pilasters 2050mm overall height inc.150mm floor clearance

• 1500mm-1800mm deep

Profiles:• Doors - Curved tops at low level height

• Partitions - Sloping to low level at rear wall

Recommended Low Level Heights:• Nursery (Pre-School) - 1350mm FFL

• Key Stage 1 (Age 5-7; Years 1 & 2) - 1500mm FFL

• Key Stage 2 (Age 7-11; Years 3, 4, 5 & 6) - 2050mm FFL

• Key Stages 3 &4 (Age 11-16) - 2050mm FFL









Ironmongery & Headrail Finish:• Satin Anodised Aluminium as standard.

• Red, Yellow or Blue powder coat finish at additional cost

Colour Selection:• Excelsior Prefered Cubicle & Washroom Selection

• Digital print designs available at extra cost.

Harlequin Select Cubicle Range

26 Harlequin Cubicle Range

‘Peardrop’ low level option• A safe & practical range for children of nursery and pre-school age.

• No sharp edges or corners.

• The Peardrop profile can be provided at low level without the requirement of a headrail support,

however the floor construction must provide the necessary fixing strength.

• Tough, easy to clean, durable finish.

• Suitable for all dry washroom environments.

Panels: Doors, Pilasters and Divisions• Laminated 18mm MR MDF

• All edges are lipped in high impact 2mm PVC

Standard Dimensions:•·Nursery Height: 1350mm F.F.L. inc. 150mm floor clearance

Profiles:•·Low level 'Peardrop' profile pilasters

•·Low level doors & partitions

•·The system is supported by the peardrop leg support frame

Ironmongery:•·Rise and fall aluminium hinges - Ref: EXCH20

•·Recessed Indicator and Keep - Ref: EXL20

•·Leg/ Peardrop support frame 150mm - Ref: EXLEG/11

•·Coat Hook - Ref:EXCOAT20


(Excludes Toilet Roll Holder & Coat Hook)

Ironmongery Finish:•·Satin Anodised Aluminium as standard.

•·Red, Yellow or Blue powder coat finish at additional cost

Colour Selection:•·Excelsior Prefered Cubicle & Washroom Selection

Please Note:• Digital print designs available at extra cost.

•·Magnetic door catch available instead of indicator bolt

•·The ability of this leg to perform is totally reliant on the strength

of the floor & fascia fixing. Excelsior have tested the product on

a solid concrete floor where it was proven fit for purpose. The

product utilises 2Nr 75mm x 8mm screwbolts to secure to the

floor. It remains the responsibility of the user to ensure that the

construction of the floor is suitable for this type of application.

Harlequin Peardrop Cubicle Range

Jungle

1

Circus

2

Under The Sea

3

Art Attack

4

Digital Print Door Options


At Excelsior we offer an extensive range of fully framed Vanity Units providing our customers

an excellent selection of worktop surface finishes to suit all environments. A solution for all

budgetary and specification requirements, always with quality and durability in mind.

Vanity UnitsDurable & attractive vanity unit surface finishes.

Select Plus Solid Surface/HPL

Vanity Unit Range

Profile Options:

SSIN1 - 560mm bed depth x 800mm o/a

height (75mm upstand) To suit Inset WHB

SSIN2 - 560mm bed depth x 800mm o/a

height (no rear upstand) To suit Inset WHB

SSSR1 - 315mm bed depth x 800mm o/a

height (75mm upstand)

To suit Semi-recessed WHB

SSSR2 - 315mm bed depth x 800mm o/a

height (no rear upstand)


Worktop Specification:• 13mm Solid Surface c/w 18mm MR MDF

core substrate

• Seamless integral rear upstand and front

downstand

Panel Specification:• High Pressure Laminate bonded onto

18mm MR MDF core

• Panels post lipped with 2mm PVC edge

finish or Postformed Vertical edges (at add.

cost)

• Underpanels Fascia/ Shadowgaps:

Dry Areas:• High Pressure Laminate bonded onto

18mm MR MDF Core

• Plinth incorporates 1mm PVC edge detail

at floor junction to prevent moisture

ingress

• All remaining egdes as cut

Frame Construction/System Support:• Sole Plate - 25mm WBP plywood (to be

packed level)

• Worktop Subframe - 18/36mm MR MDF

pre-assembled frame

• Panels pre-hung onto Underpanel fascia

using nylon Ke-Ku clips (hook on or push

fit to suit)

• Hinged access panels c/w keyed budget

lock available at additional cost

Colour Selections:• Excelsior Prefered Cubicle

& Washroom Range

Mariner SGL Vanity Unit Range

Profile Options:

SGIN1 - 600mm bed depth x 800mm o/a


SGIN2 - 600mm bed depth x 800mm o/a


SGSR1 - 315mm bed depth x 800mm o/a



SGSR2 - 315mm bed depth x 800mm o/a

height (no rear upstand)


Worktop Specification:• 10mm compact solid grade laminate

• Special CNC and post-formed integral rear

upstand and front downstand



Underpanels Fascia/Shadowgaps:


18mm MR MDF Core



ingress


Wet Areas:• 13mm compact solid grade laminate

• Black core edges as cut


packed level)


pre-assembled frame



fit to suit)




& Washroom Range

Select HPL Vanity Unit Range

Profile Options:

HPIN1 - 600mm bed depth x 800mm o/a


HPIN2 - 600mm bed depth x 800mm o/a


HPSR1 - 315mm bed depth x 800mm o/a



HPSR2 - 315mm bed depth x 800mm o/a

height (no rear upstand) To suit Semi-

recessed WHB

Worktop Specification:• High Pressure Laminate bonded onto

18mm MR MDF core

• Post-formed integral rear upstand and

front downstand

Panel Specification:

• High Pressure Laminate bonded onto

18mm MR MDF core


finish or Postformed Vertical edges

(at additional cost)

Underpanels Fascia/ Shadowgaps:


18mm MR MDF Core



ingress



packed level)


pre-assembled frame



fit to suit)




& Washroom Range

Vanity Units - Specifications

28 Vanity Unit Ranges

Mariner SGL Vanity Unit RangeSelect Plus Vanity Unit Range Select HPL Vanity Unit Range


Vanity Units - Typical Layout Options

Select Plus Solid Surface/HPL Vanity Units - Typical Profiles

Mariner SGL Vanity Units - Typical Profiles

Select HPL Vanity Units - Typical Profiles

Mariner SGL Vanity Unit RangeSelect Plus Vanity Unit Range Select HPL Vanity Unit Range

At Excelsior we offer fully framed, pre-hung washroom duct and wall panel systems with

all face panels factory mounted onto either timber or metal subframe systems. (To suit

environment conditions)

Duct Panelling

30 Duct Panelling Range

The complete pre-hung duct panelling solution.


Mariner 12mm SGL Range

Duct Panelling (Wood Frame)

Full Height Panel Specification:• 12mm compact solid grade laminate


• Panels split to suit sanitaryware

Plinth/ Shadowgaps:


18mm MR MDF or 19mm MFC



ingress




Frame Construction/System Support:• Sole Plate - 25mm WBP plywood

(to be packed level)

• Subframe - 18/36mm MR MDF

pre-assembled frame

• Panels pre-hung onto subframe using

nylon Ke-Ku clips (hook on or push fit

to suit)




& Washroom Range

Special Notes:• Excelsior COATED METAL FRAME

SYSTEM recommended for wet

area useage.

• Excelsior standard support systems may

not be compatible with all sanitary flushing

systems, therefore please enquire prior to

placing order to ensure adaptations can be

incorporated.



Select 20mm HPL Range


Full Height Panel Specification:• High Pressure Laminate bonded onto

18mm MR MDF


finish or (Postformed Vertical edges at

additional cost)


Plinth/ Shadowgaps:• High Pressure Laminate bonded onto

18mm MR MDF or 19mm MFC



ingress



packed level)

• Subframe - 18/36mm MR MDF pre-

assembled frame

• Panels pre-hung onto subframe using

nylon Ke-Ku clips (hook on or push fit

to suit)




& Washroom Range

Special Notes:• Post-formed vertical panel edges available

at additional cost

• Excelsior standard support systems may




incorporated.



Option 19mm MFC Range


Full Height Panel Specification:• 19mm Melamine Faced Chipboard

• Matching or contrasting 2mm PVC

edge finish


Plinth/ Shadowgaps:• 19mm Melamine Faced Chipboard



ingress


Frame Construction/System Support:• Sole Plate ‐ 25mm WBP plywood

(to be packed level)

• Subframe ‐ 18/36mm MR MDF

pre‐assembled frame

• Panels pre‐hung onto subframe using

nylon Ke‐Ku clips (hook on or push fit

to suit)




& Washroom Range

Special Notes:• Excelsior standard support systems may




incorporated.



Duct Panelling - Typical Layout & Specification Options

Excelsior GALVANISED COATED METAL FRAME SYSTEM available for wet and dry areas to suit clients requirements

At Excelsior we offer a number of sector related pre-hung duct panel solutions to meet all

your healthcare requirements, including hospitals, clinical surguries and acute facilities.

Further more we are able to offer the provision of pre-plumbed sanitary ware if desired.

Healthcare Duct Panelling

32 Healthcare Duct Panelling Range

Sector proven Healthcare duct panelling solution.


Mariner 12mm SGL Range


Full Height Panel Specification:• 12mm compact solid grade laminate



Plinth/ Shadowgaps:

Dry Areas:• High Pressure Laminate bonded onto 18mm MR MDF

or 19mm MFC

• Plinth incorporates 1mm PVC edge detail at floor junction to

prevent moisture ingress




Frame Construction/System Support:• Sole Plate - 25mm WBP plywood (to be packed level)

• Subframe - 18/36mm MR MDF pre-assembled frame

• Panels pre-hung onto subframe using nylon Ke-Ku clips

(hook on or push fit to suit)

• Hinged access panels c/w keyed budget lock available at

additional cost

Colour Selections:• Excelsior Prefered Cubicle & Washroom Range

Special Notes:• Excelsior COATED METAL FRAME SYSTEM recommended for

wet area useage.

• Excelsior standard support systems may not be compatible with

all sanitary flushing systems, therefore please enquire prior to

placing order to ensure adaptations can be incorporated.


additional cost

Select 20mm HPL Range


Full Height Panel Specification:• High Pressure Laminate bonded onto 18mm MR MDF

• Panels come with postformed vertical edges and 2mm PVC

horizontal edges


Plinth/ Shadowgaps:• High Pressure Laminate bonded onto 18mm MR MDF

or 19mm MFC

• Plinth incorporates 1mm PVC edge detail at floor junction to

prevent moisture ingress


Frame Construction/System Support:• Sole Plate - 25mm WBP plywood (to be packed level)

• Subframe - 18/36mm MR MDF pre-assembled frame

• Panels pre-hung onto subframe using nylon Ke-Ku clips

(hook on or push fit to suit)


additional cost

Colour Selections:• Excelsior Prefered Cubicle& Washroom Range

Special Notes:• Excelsior standard support systems may not be compatible with

all sanitary flushing systems, therefore please enquire prior to

placing order to ensure adaptations can be incorporated.


additional cost

Healthcare Duct Panelling - Typical Layout & Specification Options

Excelsior GALVANISED COATED METAL FRAME SYSTEM available for wet and dry areas to suit clients requirements

Excelsior healthcare panelling systems are fully compliant with HTM 68 panel specifications and NHS estate guidelines

Our extensive range of Lockers will satisfy all your changing area and personal storage

requirements. Specialising in the Leisure, Eduction and Workplace facility environments.

Included within our offer are three environment specific Locker ranges.

Lockers

2 3 41

1. Shock Lockers (Inset Doors)

2. Metal Perforated Lockers

3. Metal Lockers

4. Shock Lockers (Plant-On Doors)

34 Locker Range

Locker solutions for all environments.


Excelsior

Hydroline Lockers

• Locker Bodies - Manufactured from

1.0mm thick Aluminium Sheet.

• Doors - Manufactured from 10mm Solid

Grade Laminated.

• Door Framework - Anodised Aluminium

Extrusion with full length inset polymer

strips.

• Shelving - High Impact Polymer.

• Hinges: Self closing Stainless Steel.

• Widths Available - 300mm & 400mm.

• Standard Height - 1800mm High

(Wheelchair Accessable Heights

also available).

• Depths Available - 500mm.

• Colours: Doors ‐ Selection from Excelsior

10mm preferred Laminate range.

• Locking Options - Cam Lock with 2 keys

as standard and number disc to door

(coin return, digital, combination and

hasp & staple also available at request).

• 150mm high metal powder coated stands

(silver grey) c/w adjustable feet available

upon request.

• Integral Hydroline Benching available

upon request.

Excelsior Probe

SGL Shock Lockers

• Locker Bodies - Manufactured from

0.7mm thick mild steel sheet

• Doors - Manufactured from 10mm Solid

Grade Laminated.

• Metal Bodies are coated with

Activecoat TM.

• Manufactuered in accordance with

BS4680:1996.





• Single tier lockers include top shelf and

double coat hook.

• Two tier lockers include dividing shelf and

double coat hooks.

• Three/Four/Five/Six tier lockers include

dividing shelves.

• Body Colours ‐ Silver Grey or Black.

• Door Colours ‐ Selection from Excelsior

10mm preferred laminate range.

• Widths Available - 305mm,

380mm & 460mm



also available).

• Depths Available - 305mm,

380mm & 460mm



upon request.

• Integral Benching available upon request.

Excelsior Probe

Metal Lockers

• Lockers Bodies - Manufactured from

0.7mm thick mild steel sheet

• Doors - Manufactured from 0.9mm thick

mild steel doors.

• All bodies and doors are coated with

Activecoat TM.

• All Manufactuered in accordance with

BS4680:1996.





• Single tier lockers include top shelf and

double coat hook.

• Two tier lockers include dividing shelf and

double coat hooks.

• Three/ Four/ Five/ Six tier lockers include

dividing shelves.

• Body Colours ‐ Silver Grey or Black.

• Door Colours ‐ Red, Blue, Yellow, Green,

Silver & Smoke White.

• Widths Available - 305mm,

380mm & 460mm



also available).

• Depths Available - 305mm,

380mm & 460mm



upon request.

• Integral Benching available upon request.

Locker - Typical Layout & Specification Options

Our extensive range of Bench Seating will satisfy all your changing area and cloakroom

requirements. Specialising in the Leisure, Eduction and Workplace facility environments.

Included within our offer are two specific seat options and ten frame permutations.

Bench Seating

36 Bench Seating Range

Bench solutions for all environments.


Bench Seating - Typical Layout & Specification Options

Excelsior Hydroline Seat Benching

• Framework 38mm x 38mm Powder coated

Steel box section, c/w adjustable feet.

Seat Options:

• A - 25mm x 75mm Ash Hardwood Slats

finished with 2 coats of AC Lacquer.

• B - 12mm Solid grade laminate continuous

seat with radii machined edges.

Dimensions:

• Frame Heights bespoke to suit.

• Depth Options - 300mm & 400mm.

• Integral or loose coat hooks and rails

available upon request.

• Bespoke sizes available upon request.

Excelsior Hydroline Coat Rails

• Option A - 25mm Solid Ash Hardwood

Slats finished with 2 coats of AC

Lacqueror.

• Option B - 12mm Solid grade laminate.

• Coat Hooks - Nylon, SAA or Stainless

Steel available for selection.upon request.

Wall Mounted Bench Single Bench Cantilevered Wall Bench

295

TBA

Bench Frame Section Options

295

50

TBA

50

395

TBA

Seat Options400

7575

7575

25

395 295

300

7575

75 25

Frame Colours black or silver grey as standard (other colours available on request).

SPC/L300

395

TBA

SPC/L400 SPC/N300 SPC/N400

295

300

SPC/C300

39530

0

SPC/C400

1800

295

TBA

SPC/H300

395

1800

TBA

SPC/H400

1800

295 295

TBA

628

SPC/HD300

395395

1800

828

TBA

SPC/HD400

Single Island Bench Double Island Bench

400 Ash Slats 300 Ash Slats

400

12

395

12

300

295

400 SGL Slats 300 SGL Slats

38 Accessory Range

Washroom Accessories

At Excelsior we offer a full range of washroom accessories and sundry fittings to

compliment all of our cubicle ranges. From budget to high specifiaction we can cater for

all your accessory requirements.

The complete washroom accessories solution.


Ref: B-4112

Soap Dispenser

Corrosion-resistant valve dispenses

commercial liquid hand soaps. Capacity:

1.2L. 180 (W) x 155 (H) x 85mm (D).

Ref: B-2111

Soap Dispenser Vertical

Corrosion-resistant valve dispenses

commercial liquid hand soaps. Capacity:

1.2L. 120 (W) x 205 (H) x 90mm (D).

Ref: BC361 - Stainless Steel

Soap Dispenser

Wall Mounterd 750ml Refillable Soap

Dispenser. 98mm (D) x 277mm (H)

x 76mm (Diameter).

Ref: WP101-1

Prestige Soap Dispenser

Single hand pull operation soap pump.

Lockable Dispenser. Refillable 700ml.

70mm (W) x 270mm (H) x 110mm (D)

Ref: DP806 - Prestige Counter

Mounted Soap Dispenser

Solid brass construction with high quality

bright chrome finish.

75mm (H) x 100mm (Projection).

Ref: B-8226 - Soap Dispenser -

150mm Spout

Bright-polished stainless steel. Corrosion

resistant. 50mm diameter x 100 (H)

x 175mm projection. Capacity: 1.0L.

Ref: B-8601 - Soap Dispenser

Panel Mounted

Panel-mounted, bright polished chrome

plated brass.dispenser.

Spout length: 85mm. Capacity: 1.0L.

Ref: B-532

Circular Waste Chute

Circular waste chute, satin-finish stainless

steel. 170 diameter x 100 (H) x 1mm

projection

Ref: B-715E 230V - Hand Dryer

Stainless Steel

Automatic hand dryer with deep drawn

satin-finish stainless steel cover.

295 (W) x 280 (H) x 140mm (D)

40 Accessory Range

Ref: B-43699 - Paper Towel

Dispenser and Waste Bin

Dispenses 350 C-fold or 475 multifold

towels. Capacity: 9.8L.

325 (W) x 715 (H) x 170mm projection

Ref: B-4262

Paper Towel Dispenser


towels (64-97mm deep).

275 (W) x 345 (H) x 125mm (D).

Ref: B-262

Paper Towel Dispenser


towels (79-97mm deep). Lockable door.

275 (W) x 355 (H) x 100mm (D)

Ref: B-2890 - Jumbo-Roll Toilet

Tissue Dispenser

Spindle holds one roll up to 255mm

diameter with 75mm diameter core.

270 diameter x 115mm (D)

Ref: B-2721

Toilet Tissue Cabinet

Dispenses either folded sheets of toilet

tissue. Capacity: 500-600 sheets.

130 (W) x 230 (H) x 110mm (D)

Ref: B-543

Toilet Tissue Dispenser

Accommodates one roll up to 127mm

diameter with a core size from 19-38mm.

10 diameter x 115 (H) x 35mm projection.

Ref: B-4354

Sanitary Bin

Self-closing door pulls down for access to

removable, leak-proof plastic waste

containers on both sides. Capacity: 4.6L.

325 (W) x 280 (H) x 36mm projection

Ref: B-277

Waste bin with LinerMate

Equipped with LinerMate to accommodate

disposable bin liner. Capacity: 48.3L.

Dimensions: 385 (W) x 585 (H) x 215mm (D)

Ref: B-279

Waste bin

Hooks hold reusable vinyl liner (provided).

Capacity: 24.2L.

355 (W) x 455 (H) x 150mm (D)


Ref: 81009WB - Midi Jumbo Toilet

Paper Dispenser 10"

Suitable for rolls with a maximum width of

110mm and a core size between 45mm and

65mm. Maximum Diameter of roll 260mm.

Ref: 81014WB - Bulk Pack/Flat Pack

Toilet Tissue Dispenser

Suitable for multiflat or flat pack toilet tissue

up to 125mm in width, with a capacity of

230mm stack..

Ref: 81001WB - C/fold-Multi Fold

Hand Towel dispenser Large

Suitable for interleaved or centefold hand

towels up to 255mm wide, with a capcity

stack of 360mm.

Ref: 81003WB - C/fold-Multi Fold

Hand Towel Dispenser Small

Suitable for interleaved or centefold hand

towels up to 255mm wide, with a capcity

stack of 200mm.

Ref: 50801WB - Soap Dispenser

Refillable 0.9 litre

Lockable front cover and a sight window to

show when a refill is required. Capacity

900ml. Height 250mm Width 115mm

Depth 115mm

Ref: 84530WH

Metal Waste Bin

A sturdy durable 50ltr Free standing or wall

mounted, Waste bin spring loaded push flap

operation. Dimensions: Height 70.8cm

Width 33.5cm Depth 25.8cm

Ref: WC Door Signs

Male WC Ref: WCM01.

Female WC Ref: WCF02.

Unisex WC Ref: WCUN03.

Disabled WC Ref: WCD04.

Ref: KB110-SSWM-INB - Horizontal

Surface - Mounted Baby Changing

Station - Stainless Steel

Microban® anti-bacterial coating.

892mm (W) x 508mm (H) x 102mm

projection (488mm when opened)

Ref: KB200-05-INB - Horizontal

Baby Changing Station - White

Granite Effect Polypropylene

Microban® anti-bacterial coating.

889mm (W) x 565mm (H) x 102mm

projection (572mm when opened)

42 Accessory Range

Ref: GRSS600R - 600mm

Stainless Steel Grab Rail

600mm x 32mm diameter satin finish

c/w rose and cover plate fixing detail.

Supplied as single rails.

Ref: GRSS600BT - 600mm

Stainless Steel Grab Rail


c/w bolt through fixing detail.

Supplied as single rails.

Ref: GRSS300D - 300mm

Stainless Steel D Handle


c/w bolt through or back to back handle

fixing detail. Supplied as single rails.

Ref: GRSS600DocM

Stainless Steel Grab Rail Set

32mm diameter satin finish c/w rose and

cover plate fixing details.

Ref: GRPC600DocM

Powder Coated Grab Rail Set

32mm diameter powder coated finish c/w

rose and cover plate fixing details.

Available in white or blue.

Ref: GRPC600R - 600mm

Powder Coated Grab Rail

600mm x 32mm diameter powder coated

finish c/w rose and cover plate fixing details.

Available in white or blue

Ref: P-12

Pull Handle

Satin stainless steel straight pull handle.

Single bolt through or back to back fixing

available. 19mm (diameter) x 300mm.

Ref: 98222

Alite Double Toilet Roll Holder

Satin stainless steel double toilet holder.

254mm x 85mm x 10mm dia x 40 mm

(protrusion)

Ref: 98232

Alite Buffered Hat & Coat Hook

Satin stainless steel hat and coat hook.

70mm (Long) x 30mm (Diameter fixing plate)

with 16mm (Diameter barrel/buffer).

Ref: X2876

Stainless Steel Wall Door Stop

16mm x 75mm door stop, 50 x 8mm

concealed rose. Finish SSS,

Screw Fixings supplied. .

Ref: X2875

Stainless Steel Wall Door Stop

16mm x 75mm door stop.

Finish SSS, Screw Fixings supplied..

Ref: X2830

Stainless Steel Floor Door Stop

30mm Diameter with black rubber buffer.

Finish SSS, Screw Fixings supplied.

Ref: X25PRINTED

Stainless Steel Printed Push Plate

Stainless Steel Printed Push Plate

300 x 75mm, Screw fixings supplied.

Finish SSS

Ref: X25

Stainless Steel Push Plate

Stainless Steel Push Plate

300 x 75mm, Screw fixings supplied.

Finish SSS

Ref: T521

Stainless Steel

Hat & Coat Hook, Buffer

44mm projection,

Screw fixings supplied. Finish SSS.

Ref: T510

Stainless Steel Coat Hook, Buffer

44mm projection,

Screw fixings supplied. Finish SSS

Ref: T501

Stainless Steel Coat Hook, Buffer

65mm Cylindrical Coat/Hook Buffer,

Concealed fix. Finish SSS, Wood

Screws supplied.

Ref: B-542

Coat Hook

Coat hook, satin-finish stainless steel.

Flange has 49mm diameter.

19mm diameter x 32mm (H)

x 33mm projection


www.excelsior-cubicles.co.uk [email protected]

Excelsior Panelling Systems Limited

Unit 2 Woodside Industrial Estate

Pedmore Road

Dudley, West Midlands

DY2 0RL

Tel: 01384 267770

Fax: 01384 482127

Email: [email protected]

Excelsior Affiliations

from creation to installation... you can rest assuredExcelsior have undertaken the manufacture, supply and installation of bespoke washroom products

in all washroom environments since 1978. We have a wide selection of safe, attractive and reliable

systems to suit all applications, from nursery schools right through to leisure centres and hospitals.

All levels of durability are catered for to meet the end users commercial constraints, combining

innovation with practicality.

Documents

PRODUCT GUIDE 2012 · 2017-08-18 · 2 Flush44 Cubicle Range About Us 3 Flush44 4-5 T-Line 6-7 Senator 8-9 Skyline 10-11 Hydroline 12-13 Mariner 14-15 Select 16-17 Entasis 18-19 Classik