Product Environmental Proﬁ le · Allow the connection to a 250V low voltage circuit, according to standards NFC-15100 et CEI 60884-1, with a non-continuous operation (30% of time)

PEP ecopassport No LGRP-00232-V01.01-EN 20 E0265A-EN Page 1 / 4

Product Environmental Profi lePower socket outlet French-Belgian standard

LivingLight series

BTicino SpAViale Borri, 23121100 - Varese - Italy

Your usual Sales offi ce www.bticino.com

BTICINO’S ENVIRONMENTAL COMMITMENTS • Incorporate environmental management into our industrial sitesOf all Legrand sites worldwide, over 85% are ISO 14001-certifi ed (sites belonging to the Group for more than fi ve years).

• Offer our customers environmentally friendly solutionsDevelop innovative solutions to help our customers design more energy effi cient, better managed and more environmentally friendly installations.

• Involve the environment in product design and provide informations in compliance with ISO 14025Reduce the environmental impact of products over their whole life cycle.Provide our customers with all relevant information (composition, consumption, end of life, etc.).

PRODUCTS CONCERNED The environmental data is representative of the following products:

REFERENCE PRODUCT

FunctionAllow the connection to a 250V low voltage circuit, according to standards NFC-15100 et CEI 60884-1, with a non-continuous operation (30% of time) during 20 years (household or similar purposes) at 30% of rated load, with rated load not exceeding 16A. PSR category: passive product..

Reference ProductBT-LNA4802BI BT-LN4702

2 modules square cover plate - white 2 modules support - screws equipped

BT-LN4142AN2 P + E 16A 250 V a.c. socket - French/Belgian standard

The company reserves the right to change specifi cations and designs without notice. All illustrations, descriptions, dimensions and weights in the document are for guidance and cannot be held binding on the company.

BT-LNA4802BI BT-LN4702 BT-LN4142AN

BT-LNA4802AR - TEBT-L4802PA - PB - BIBT-LNA4819BI - AR - TE

BT-L4702 - BT-L4702GBT-LN4719 - BT-LN4719G

BT-L4142AN - BT-L4142AFBT-N4142AN - BT-N4142AFBT-NT4142AN - BT-NT4142AF



LivingLight series



MANUFACTURE This Reference Product comes from sites that have received ISO14001 certifi cation.

CONSTITUENT MATERIALS This Reference Product contains no substances prohibited by the regulations applicable at the time of its introduction to the market.It respects the restrictions on use of hazardous substances as defi ned in the RoHS directive 2011/65/EU.

DISTRIBUTION Products are distributed from logistics centres located with a view to optimize transport effi ciency. The Reference Product is therefore transported over an average distance of 780 km by road from our warehouse to the local point of distribution into the european market.

Packaging is compliant with european directive 2004/12/EU concerning packaging and packaging waste. At their end of life, its recyclability rate is 93 % (in % of packaging weight).

INSTALLATION For the installation of the product, only standard tools are needed.

USE Under normal conditions of use, this product requires no servicing, no maintenance or additional products.

Plastics as % of weight Metals as % of weight Other (packaging) as % of weight

Polycarbonate 33,2 % Copper alloys 9,8 % Paper / cardboard 20,0 %

ABS 15,9 % Steel 2,9 % Wood 15,9 %

Polyamide 0,5 % Polyethylene 1,7 %

Other plastics 0,1 %

Total plastics 49,7 % Total metals 12,7 % Total other (packaging) 37,6 %

Estimated recycled material content: 15 % by mass.

Total weight of Reference Product 96 g (with unit packaging)



LivingLight series



END OF LIFE The product end-of-life factors are taken into account during the design phase. Dismantling and sorting of components or materials is made as easy as possible with a view to recycling or failing that, another form of reuse. This product falls within the scope of the WEEE directive (2012/19/EU). Therefore it must be processed through local WEEE recycling/recovery channels.

• Extended producer responsability:The sale of this product is subject to a contribution to eco-organisations in each country responsible for managing end-of-life products in the fi eld of application of the European Waste Electronic and Electrical Equipment Directive.

• Recyclability rate: Calculated using the method described in technical report IEC/TR 62635, the recyclability rate of the product is estimated at 95 %. This value is based on data collected from a technological channel operating on an industrial basis. It does not pre-validate the effective use of this channel for the end of life of this product.

Separated into: - plastic materials (excluding packaging) : 47 % - metal materials (excluding packaging) : 13 % - packaging (all types of materials) : 35 %

Manufacture Materials and components of the product, all transport for the manufacturing, the packaging and the waste generated by the manufacturing.

Distribution Transport between the last Group distribution centre and an average delivery point in the sales area.

Installation The end of life of the packaging.

Use • Product category: active product.• Use scenario: non-continuous operation for 20 years at 30% of rated load, during 30% of the time. This modelling duration does not constitute a minimum durability requirement.• Energy model: Electricity Mix, Europe 27 - 2002.

End of life The default end of life scenario maximizing the impacts.

Software and database used EIME V5 and its database «CODDE-2015-04»

ENVIRONMENTAL IMPACTS The evaluation of environmental impacts examines the stages of the Reference Product life cycle: manufacturing, distribution, installation, use and end-of-life. It is representative from products marketed and used in Europe, in compliance with the local current standards.For each phase, the following modelling elements were taken in account:



LivingLight series



SELECTION OF ENVIRONMENTAL IMPACTS

Total for Life cycle

Raw material and manufacture Distribution Installation Use End of life

Global warming 4.68E+00 kgCO2 eq. 5.38E-01 12% 3.71E-03 < 1% 2.08E-03 < 1% 4.13E+00 88% 6.31E-03 < 1%

Ozone depletion 1.21E-06 kgCFC-11 eq. 2.04E-07 17% 7.52E-12 < 1% 1.42E-11 < 1% 1.00E-06 83% 1.47E-10 < 1%

Acidifi cation of soils and water 3.18E-02 kgSO2 eq. 5.38E-04 2% 1.67E-05 < 1% 9.68E-06 < 1% 3.12E-02 98% 2.43E-05 < 1%

Water eutrophication 1.40E-03 kg(PO4)3- eq. 1.85E-04 13% 3.83E-06 < 1% 7.67E-06 < 1% 1.17E-03 84% 2.95E-05 2%

Photochemical ozone formation 1.56E-03 kgC2H4 eq. 8.56E-05 5% 1.18E-06 < 1% 6.90E-07 < 1% 1.48E-03 94% 1.89E-06 < 1%

Depletion of abiotic resources - elements 1.36E-05 kgSb eq. 1.34E-05 99% 1.49E-10 < 1% 9.17E-11 < 1% 1.88E-07 1% 3.89E-10 < 1%

Total useof primary energy 9.49E+01 MJ 1.11E+01 12% 5.25E-02 < 1% 2.98E-02 < 1% 8.36E+01 88% 9.59E-02 < 1%

Net useof fresh water 1.50E-02 m3 4.25E-03 28% 3.32E-07 < 1% 5.92E-07 < 1% 1.08E-02 72% 5.08E-06 < 1%

Depletion of abiotic resources - fossil fuels

5.02E+01 MJ 7.52E+00 15% 5.21E-02 < 1% 2.91E-02 < 1% 4.25E+01 85% 8.92E-02 < 1%

Water pollution 3.82E+02 m3 2.07E+02 54% 6.10E-01 < 1% 3.21E-01 < 1% 1.73E+02 45% 7.35E-01 < 1%

Air pollution 2.78E+02 m3 1.00E+02 36% 1.52E-01 < 1% 1.98E-01 < 1% 1.77E+02 64% 7.01E-01 < 1%

Registration N°: LGRP-00232-V01.01-EN Drafting rules: PEP-PCR-ed3-EN-2015 04 02Supplemented by PSR-0005-ed1-2012 12 11

Verifi er accreditation N°: VH02 Information and reference documents : www.pep-ecopassport.org

Date of issue: 08-2016 Validity period: 5 years

Independent verifi cation of the declaration and data, in compliance with ISO 14025:2010 Internal External

The PCR review was conducted by a panel of experts chaired by Philippe Osset (SOLINNEN)

The elements of the present PEP cannot be compared with elements from another program

Document in compliance with ISO 14025 : 2010: «Environmental labels and declarations. Type III environmental declarations»

Environmental data in alignment with EN 15804 : 2012 + A1 : 2013

The values of the 27 impacts defined in the PCR-ed3-EN-2015 04 02 are available in the digital database of pep-ecopassport.org website.

For products covered by the PEP other than the Reference Product: the environmental impacts are calculated for a configuration composed by French/Belgian standard Socket, Support and Cover plate. To obtain the environmental impacts for each phase of the lifecycle, multiply those of Reference Product for these coefficients:

Power socket outlet configuration

Total Manufacturing Distribution Installation Use End of life

LL 2 centred modules 1,0 1,3 1,2 1,2 1,0 1,4

LL 4 modules (with 2 sockets) 2,0 1,9 1,8 2,0 2,0 1,8

Living International Polymer 1,1 1,1 1,0 1,0 1,0 1,1

For the power socket outlet confi guration with Flat 2P+E French/Belgian standard socket, the environmental impacts of the table are obtained multiplying the total values on the table for the coeffi cient 1.1.

Documents

Product Environmental Proﬁ le · Allow the connection to a 250V low voltage circuit, according to standards NFC-15100 et CEI 60884-1, with a non-continuous operation (30% of time)