Product End-of-Life Disassembly Instructionsh22235. · Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple

EL-MF877-00 Page 1

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs

Marketing Name / Model [List multiple models if applicable.]

HP EliteBook 8760w Mobile Workstation

Name / Model #2

Name / Model #3

Name / Model #4

Name / Model #5

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.

Item Description Notes

Quantity of items included in product

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

With a surface greater than 10 sq cm

3

Batteries All types including standard alkaline and lithium coin or button style batteries

2

Mercury-containing components For example, mercury in lamps, display backlights, scanner lamps, switches, batteries

0

Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm

Includes background illuminated displays with gas discharge lamps

1

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing PCB/PCT) 0

Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height

0

External electrical cables and cords 0

Gas Discharge Lamps 0

Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above)

0

Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent chambers, and service stations.

0

Components and waste containing asbestos 0

EL-MF877-00 Page 2

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Components, parts and materials containing refractory ceramic fibers

0

Components, parts and materials containing radioactive substances

0

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.

Tool Description Tool Size (if applicable)

Description #1 Cross head of screwdriver

Description #2 TORX T8 (2.31mm)

Description #3

Description #4

Description #5

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Follow steps described in Disassembly instruction (file attached) 2. If parts can be removed without using a tool, remove it first. 3. Use correct screwdriver and torque value before unlock the screw. 4. 5. 6. 7. 8.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Notes : If finding anything uncommon, notice foreman or assistant at once.

Standard Operation Procedure

Document No. : SOP Aerosmith FA DIS ASS’Y Station :

Name : Ver. : Date :

Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

Tabulator： Issue department：

Step：

Jing-Wen Yang NPI-SE

Disassemble battery and cover

1. Pull safe lock to left end , take out battery

(figure1)

2. Pull cover’s safe lock to right end (figure 2) ,

disassemble cover (figure3).

1(1/1)

0.10 2011/03/25

Figure 1

Figure 2

Safe lock to right end until see red

mark

Disassemble cover

Figure 3







Step：


Loosen BTCB screw

1. Loosen BTCB screw * 8 (figure 1).

2(1/1)

0.10 2011/03/25

Electric plum blossom screw driver (#1) 1

Figure 1







Step：


Disassemble Bluetooth

1. Disassemble Bluetooth (figure1).

2. Disassemble Bluetooth Cable (figure 2).

3(1/1)

0.10 2011/03/25

Figure 1

Figure 2







Step：


Disassemble ODD and loosen screw

1. Loosen BTCB Set screw * 4 (Figure1).

2. Disassemble ODD.

4(1/1)

0.10 2011/03/25

Electric cross screw driver(#0) 1

Figure 1







Step：


Loosen BTCB screw

1. Loosen BTCB screw* 6 (figure1).

5(1/1)

0.10 2011/03/25

Electric plum blossom screw driver 1

Figure 1







Step：


Disassemble Smart Card Holder

1. Disassemble FFC (figure 1) , Loosen smart card

holder screw * 2 (figure 2).

2. Pull up the smart card holder in parallel, then

take out the round hole in the lower side

(figure 3).

3. Loosen screw *1 , separate smart card holder

and smart card (figure 4)

6(1/1)

0.10 2011/03/25

Electric cross screw driver(#1) 1

take out the round hole

in the lower side

Pull up the smart card holder

in parallel

Figure 1

Figure 2

Figure 3 Figure 4







Step：


Disassemble HDD-1

1. Loosen HDD-1 screw * 3 (figure 1, figure 2)

2. Disassemble HDD-1 (figure2)

7(1/1)

0.10 2011/03/25

HDD-1

HDD-1 HDD-2

Figure 1

Figure 2

Electric cross screw driver 1







Step：


Disassemble HDD -1

1. Put HDD-1 in support fixture , loosen screw * 4

8(1/1)


Support fixture 1

0.10 2011/03/25







Step：


Disassemble HDD-2

9(1/1)

0.10 2011/03/25

HDD-1 HDD-2

1. Loosen HDD-2 screw * 3 (figure 1, figure 2)

2. Disassemble HDD-2 (figure2)

Figure 1

Figure 2








Step：


Disassemble HDD -2

10(1/1)


Support fixture

0.10 2011/03/25

1. Put HDD-2 in support fixture , loosen screw * 4







Step：


Disassemble DDR

1. Disassemble all DDR (Figure 1, Figure 2)

11(1/1)

0.10 2011/03/25

Figure 1

Figure 2







Step：


Disassemble FFC and Keyboard

1. Disassemble K/B Stick-point FFC ,

do not pull touch Pad FFC while operation

(figure 1)

2. For backlight K/B , Disassemble K/B light sensor

FFC

3. Disassemble K/B FFC (figure 2)

12(1/1)

0.10 2011/03/25

Figure 1

Figure 2







Step：


Disassemble FFC

1. Disassemble Touch pad FFC , finger/p FFC

(figure 1)

2. Disassemble Power Button FFC (figure 2)

3. Disassemble SW/B FFC (figure 3)

13(1/1)

0.10 2011/03/25

Touch pad FFC Figure 1

Figure 2

Figure 3







Step：


Disassemble TPCB

1. Disassemble TPCB，as figure 1 , figure 2.

14(1/1)

0.10 2011/03/25

1 1

2 2

3 3

Figure 1

Figure 2







Step：


15(1/1)

0.10 2011/03/25

1. Disassemble TPCB, disassemble Finger Print/B ,

disassemble tape (figure 1).

Disassemble Finger/B

Figure 1







Step：


Disassemble CRT/B

16(1/1)

0.10 2011/03/25

1. Loosen screw*1 , disassemble CRT/B (figure 1)

Figure 1

figure二








Step：


Disassemble WLAN cable

1. Disassemble WLAN cable form WLAN (figure 1)

2. Loosen screw * 2 , disassemble WLAN module

(figure 2)

17(1/1)

0.10 2011/03/25

Figure 1

Figure 2








Step：


Disassemble WWAN cable

1. Disassemble WWAN cable form WWAN

(figure 1)

2. Loosen screw *2 , disassemble WWAN module

(figure1)

18(1/1)

0.10 2011/03/25

Figure 1








Step：


Disassemble cable

19(1/1)

0.10 2011/03/25

1. Disassemble cable from left to right

(Figure 1 , figure 2)

Figure 1

Figure 2







Step：


1. Disassemble Camera cable (figure 1 , figure 2)

2. Disassemble Antenna from white hook (figure 3)

3. Disassemble Antenna tape , disassemble Cable.

4. Disassemble LCM Cable (figure 4)

Disassemble Antenna

20(1/1)

0.10 2011/03/25

Camera CNTR

Figure 1

Figure 2

Figure 3 Figure 4







Step：


Disassemble Hinge cover

1. Put machine in support fixture (figure1)

2. Loosen screw * 4 (Figure 2)

3. Disassemble hinge cover.

4. Loosen screw *4 (figure 3 , figure4)

21(1/1)

0.10 2011/03/25

Electric plum blossom screw driver (#1) 1

Support fixture 1

Figure 1

Figure 2

Figure 3 Figure 4







Step：


1. Loosen LCM screw * 2 (figure 1/figure 2)

2. Disassemble LCM.

Disassemble LCM

22(1/1)

0.10 2011/03/25

Electric plum blossom screw driver 1

Figure 1

Figure 2







Step：


Disassemble DDR

1. Disassemble all DDR

23(1/1)

0.10 2011/03/25

Figure 1







Step：


Disassemble USB 3.0/B

1. Loosen USB 3.0/B &Audio/B screw * 6

(figure1/figure2)

2. Disassemble USB 3.0/B.

24(1/1)

0.10 2011/03/25

2

4

5

Figure 1

Figure 2








Step：


Speak

er

1. Loosen Speaker screw * 2 (figure 1).

2. Disassemble speaker and Audio/B.

3. Separate speaker and Audio/B (figure 2).

25(1/1)

0.10 2011/03/25Disassemble speaker and Audio/B

Figure 1

Figure 2








Step：


1. Loosen screw * 2 (figure 1)

2. Disassemble Modem，separate Modem and

RJ11Cable (figure 2)

3. Disassemble RJ11 Cable (figure 3, figure 4)

Disassemble Modem

26(1/1)

0.10 2011/03/25

Figure 1

Figure 2

Figure 3 Figure 4








Step：


1. Disassemble cable (figure 1).

2. Loosen screw *1 , disassemble RJ11 or Dummy

cable (figure 2)

Disassemble RJ11

27(1/1)

0.10 2011/03/25

Figure 1

Figure 2








Step：


Disassemble VGA/B Thermal

1. Loosen VGA/B Thermal screw * 6 (figure 1)

2. Disassemble FAN Cable (figure 2)

3. Disassemble VGA Thermal

28(1/1)

0.10 2011/03/25

Figure 1

Figure 2








Step：


Disassemble Fan

1. Loosen screw(6052A0035901) * 3，Disassemble FAN；

2. Disassemble Fan (6033B0021201) and

Thermal (figure1)。

29(1/1)

0.10 2011/03/25


Support fixture 1

Figure 1

Figure 1







Step：


30(1/1)

0.10 2011/03/25

1. Loosen screw * 2 (figure 3)

2. Disassemble VGA/B (figure 1)

Disassemble VGA/B

figure1

figure2








Step：


Disassemble CPU Thermal

1. Loosen thermal screw* 4 (figure 1)

2. disassemble Thermal (figure 2 or figure 3)

31(1/1)

0.10 2011/03/25

45W/55W35W

Figure 1

Figure 2 Figure 3








Step：


Disassemble CPU

1. Loosen CPU SOCKET by using one-line screw

driver (figure 1 , figure 2)

2. Disassemble CPU by using suction pen.

32(1/1)

0.10 2011/03/25

One-line screw driver 1

Suction pen 1

Lock

Unlock

Figure 1

Figure 2







Step：


1. Disassemble Nut * 2 (figure 1，figure 2）

Disassemble NUT

33(1/1)

0.10 2011/03/25

Hexagon screw driver 1

Figure 1







Step：


1. Loosen screw * 3 (figure 1 , figure 2)

2. Remove DC Cable , RJ45 Cable CNTR from

M/B (figure 3)

3. Disassemble DC Cable , RJ45 cable (figure 1,2)

4. Reverse machine , Disassemble sub-battery

(figure 4)

Disassemble DC & RJ45 cable

34(1/1)

0.10 2011/03/25

RJ 45 Cable

3

DC Cable

1

2

Figure 1

Figure 2

Figure 4Figure 3








Step：


1. Loosen screw * 4 (figure1)

2. Disassemble bluetooth cable (figure2)

3. Disassemble Main board

Disassemble MB

35(1/1)

0.10 2011/03/25

3


4

Bluetooth CNTR

1

Figure 1

Figure 2 Figure 3

Documents

Product End-of-Life Disassembly Instructionsh22235. · Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple