Upload
lethuy
View
221
Download
0
Embed Size (px)
Citation preview
Product Description – EB Hardware
Version: 20.10.2014 Confidential Page 1/12
Product Description
EB Hardware
Overview
EB hardware can be used with different EB software tools (e.g. EB tresos Busmirror). Software compatibility can be found in the corresponding software product description. EB offers a variety of different hardware platforms for different use cases.
EB hardware quick overview:
EB HW Intended use
CPU Temp. range
Interfaces
CAN FlexRay Lin Digital in/out
EB 6100 In-car 400MHz -30…70 2 HS / 1 LS 1 (2 ch.) 1 16 I/O
EB 2100 Desktop 400MHz 0…50 4 HS / 1 LS 1 (2 ch.) 2 4/4
EB 5100 Slot-card 400MHz -30…701 Ext: max 4 Ext :1 (2 ch.) Ext: max 2 Ext
EB 6200 In-car 2x1GHz -40…60 Ext: max 6 Ext :1 (2 ch.) Ext: max 4 Ext
EB 2200 Desktop 2x1GHz -40…60 Ext: max 6 Ext: 1 (2 ch.) Ext: max 4 Ext
EB 5200 Slot-card 2x1GHz -40…701 Ext: max 4 Ext: 1 (2 ch.) Ext: max 4 Ext
EB 5200 + EB 0206 + EB 0205
Slot-card 2x1GHz -40…701 Ext: max 6 Ext: 1 (2 ch) Ext: max 4 Ext
EB HW Inter-faces
Power supply
Power consump-tion (max)
FPGA
Ext. slots
GPS Ethernet USB USB Host
RS232
EB 6100 0 - 1 × 100Mbit 1 - 1 6,5…30 V 5W Y (large)
EB 2100 0 - 1 × 100Mbit 1 - - 6,5…30 V 5W Y (large)
EB 5100 5 - - 1 - 1 (int.) - 5W Y (large)
EB 6200 9 Ext: max 1 2 × 1Gbit 1 1 - 6,5…30 V 15W Y (v.large)
EB 2200 9 Ext: max 1 2 × 1Gbit 1 1 Ext: 1 6,5…30 V 15W Y (v.large)
EB 5200 4 Ext: max 1 - - - 1 (int.) - 10W Y (v.large)
EB 5200 + EB 0206 + EB 0205
8 Ext: max 1 1 x 1Gbit - - 1 (int.) - 12W Y (v.large)
All devices operate within a humidity range of 5 to 95 percent in a non-condensing environment.
1 Please note that these are the temperature conditions within the housing surrounding the card. The temperature range outside the
housing will be somewhat narrower, because of the temperature rise within the housing.
Product Description – EB Hardware
Version: 20.10.2014 Confidential Page 2/12
EB x2xx hardware series:
Extendable interface hardware
User can select which extension slots are plugged into the hardware to scale up the functionality
Dual-Core µC with 2 × 1GHz
2 × FlexRay controllers in FPGA
6 × CAN controllers in FPGA
4 × LIN controllers in FPGA
EB 6200 (in-car use) EB 2200 (desktop use) EB 5200 (modular slot card)
Modular system with 9 extension slots. Modules available for:
FlexRay (max. 2 ch)
CAN high (max. 6)
LIN (max. 4)
Digital I/O
GPS
Modular system with 9 extension slots. Modules available for:
FlexRay (max. 2 ch)
CAN high (max. 6)
LIN (max. 4)
Digital I/O
GPS
Modular system with 4 extension slots. Modules available for:
FlexRay (max. 2 ch)
CAN high (max. 6)
LIN (max. 4)
Digital I/O
GPS
Automotive robust housing with ODU connectors,
Temp. Range: -40 °C to +60 °C
Robust housing with DSUB9 connectors
Temp. Range: -40 to +60 °C
XMC standard board with adaptor boards for PCIe, cPCI, …
Temp. Range: -40 to +70 °C
EB 2200 detailed hardware specifications:
High-performance Dual-Core µC with 2 × 1GHz
PC connections via Gigabit Ethernet or USB 2.0 (or RS232 via extension module)
FPGA (Altera EP4EC115) on-board to enable future updates
Supply voltage: 6,5 V to 30 V
Robust housing • Measurements 215 × 140 × 50 mm • Temperature range: -40° C to +60° C • Relative humidity range (non-condensing): 5% to 95%
DSUB9 connectors on extension modules
2 × Gb Ethernet 10/100/1000BASE-T (Host-PC link and automotive bus)
Product Description – EB Hardware
Version: 20.10.2014 Confidential Page 3/12
2 × USB 2.0 (1 × Host-PC link and 1 × USB host for connection with USB devices)
Power consumption: max. 15W
Delivery content:
EB 2200 hardware
Power supply
USB cable
Factory option:
Automotive grade power regulator according to VW80101
EB 6200 detailed hardware specifications:
High-performance Dual-Core µC with 2 × 1GHz
PC connections via Gigabit Ethernet or USB 2.0 (or RS232 via extension module)
FPGA (Altera EP4EC115) on-board to enable future updates
Supply voltage: 6,5 V to 30 V
Robust automotive housing • Measurements 215 × 140 × 50 mm • Temperature range: -40° C to +60° C • Relative humidity range (non-condensing): 5% to 95%
Reliable high-quality push-pull connectors
2 × GB Ethernet 10/100/1000BASE-T (Host-PC link and automotive bus)
2 × USB 2.0 (1 × Host-PC link and 1 × USB host for connection with USB devices)
Power consumption: max. 15W
Delivery content:
EB 6200 hardware
Ethernet PC connection cable
Power supply
Factory option:
Automotive grade power regulator according to VW80101
EB 5200 detailed hardware specifications:
High-performance Dual-Core µC with 2 × 1GHz
XMC-PCIe (ANSI/VITA 42.3) standard based board
FPGA (Altera EP4EC115) on-board to enable future updates
Temperature range: -40° C to +70° C
Delivery content:
EB 5200 hardware
Product Description – EB Hardware
Version: 20.10.2014 Confidential Page 4/12
EB x200 extensions modules
EB 2200 extension module EB 6200 extension module EB 5200 extension module
Extension Module Interface
EB 2200 AddOn EB 0261: Extension_Module_CAN_High_Speed
CAN high-speed extension module AddOn for EB 2200 Hardware - TJA1041 based high-speed CAN module - Standard DSUB9 connector - Software controllable termination resistors Delivery Content: - 1 extension module
EB 2200 AddOn EB 0284: Extension_Module_Digital_Input/Output
Digital I/O extension module AddOn for EB 2200 Hardware - I/O interface module (2 × in, 2 × out) - Standard DSUB9 connector - 2 × in (3…24) V (galvanically isolated) - 2 × out (3,3 V, 50 mA for both channels in sum; galvanically isolated) Delivery Content: - 1 extension module
EB 2200 AddOn EB 0264: Extension_Module_8x_DIO
Digital I/O extension module AddOn for EB 2200 Hardware - I/O interface module (8 × user configurable in or out) - Standard DSUB9 connector - 3,3V LVTTL - max. 4mA for each output - not galvanically isolated Delivery Content: - 1 extension module
EB 2200 AddOn EB 0260: Extension_Module_FlexRay
FlexRay single channel extension module AddOn for EB 2200 Hardware - AS8221/AS8222 based FlexRay V2.1 module - Standard DSUB9 connector - Software controllable termination resistors Delivery Content: - 1 extension module
EB 2200 AddOn EB 0262: Extension_Module_LIN
LIN extension module AddOn for EB 2200 Hardware
Product Description – EB Hardware
Version: 20.10.2014 Confidential Page 5/12
- TJA1020/TJA1021 based LIN module - Standard DSUB9 connector - Software configurable to master/slave operation Delivery Content: - 1 extension module
EB 2200 AddOn EB 0215: Extension_Module_RS232
RS232 extension module AddOn for EB 2200 Hardware - Standard DSUB9 connector - No hardware flow-control Delivery Content: - 1 extension module
EB 2200/6200 AddOn EB 0230: Extension_Module_GPS_Receiver
GPS extension module AddOn for EB 2200 and EB 6200 Hardware - Extension module with GPS receiver (MN8010) - SMA antenna connector - Antenna not included - EB 6200 Version not ruggedized - NMEA-0183 compatible - Provides 1PPS pulse Delivery Content: - 1 × GPS receiver extension module without antenna
EB 5200 AddOn EB 0221: Extension_Module_CAN_High_Speed
CAN high-speed extension module AddOn for EB 5200 Hardware - TJA1041 based high-speed CAN module - Software controllable termination resistors - Push-pull 5-pin ODU connector Delivery Content: - 1 extension module - Please order connector and cabling separately.
EB 5200 AddOn EB 0244: Extension_Module_Digital_Input/Output
I/O extension module AddOn for EB 5200 Hardware - I/O interface module - Push-pull 7-pin ODU connector - 2 × in (3 .... 24) V (galvanically isolated) - 2 × out (3,3 V, 50 mA for both channels in sum; galvanically isolated) Delivery Content: - 1 extension module - Please order connector and cabling separately.
EB 5200 AddOn EB 0220: Extension_Module_FlexRay
FlexRay single channel extension module AddOn for EB 5200 Hardware - AS8221/AS8222 based FlexRay V2.1 module - Software controllable termination resistor - Push-pull 5-pin ODU connector Delivery Content: - 1 extension module - Please order connector and cabling separately.
EB 5200 AddOn EB 0222: Extension_Module_LIN
LIN extension module AddOn for EB 5200 Hardware
Product Description – EB Hardware
Version: 20.10.2014 Confidential Page 6/12
- TJA1020/TJA1021 based LIN module - Software configurable to master/slave operation - Push-pull 5-pin ODU connector Delivery Content: - 1 extension module - Please order connector and cabling separately.
EB 6200 AddOn EB 0221: Extension_Module_CAN_High_Speed
CAN extension module AddOn for EB 6200 Hardware - TJA1041 based high-speed CAN module - Software controllable termination resistors - Push-pull 5-pin ODU connector Delivery Content: - 1 extension module - Please order connector and cabling separately.
EB 6200 AddOn EB 0244: Extension_Module_Digital_Input/Output
I/O extension module AddOn for EB 6200 Hardware - I/O interface module - Push-pull 7-pin ODU connector - 2 × in (3 .... 24) V (galvanically isolated) - 2 × out (3,3 V, 50mA for both channels in sum; galvanically isolated) Delivery Content: - 1 extension module - Please order connector and cabling separately.
EB 6200 AddOn EB 0220: Extension_Module_FlexRay
FlexRay single channel extension module AddOn for EB 6200 Hardware - AS8221/AS8222 based FlexRay V2.1 module - Software controllable termination resistors - Push-pull 5-pin ODU connector Delivery Content: - 1 × extension module - Please order connector and cabling separately.
EB 6200 AddOn EB 0222: Extension_Module_LIN
LIN extension module AddOn for EB 5200 Hardware - TJA1020/TJA1021 based LIN module - Software configurable to master/slave operation - Push-pull 5-pin ODU connector Delivery Content: - 1 extension module - Please order connector and cabling separately.
Product Description – EB Hardware
Version: 20.10.2014 Confidential Page 7/12
EB 2200 AddOn EB 0207:Extension module EtherCAT
May be ordered as factory-option for EB 2200
Provides EtherCAT slave-device IN- and OUT- connectors
Provides separate RS-232 connector
Occupies 3 extension slots on the front-side of the EB 2200
Comes with EtherCAT specific front-panel
EB 5200 PCIe carrier board
EB 0206x Carrier Board EB 0205 Carrier Extension Board
The EB 0206x is a PCIe x1 carrier board for the EB 5200 The EB 0206x provides an JTAG/COP connector for debugging purposes The EB 0205 may be connected to the EB 0206x via two FFC-cables The EB 0205 does not necessarily need an own PCIe slot The EB 0205 provides four additional extension slots
Product Description – EB Hardware
Version: 20.10.2014 Confidential Page 8/12
The EB 0205 provides an Ethernet connector The EB 0206s is a standard PCIe x1 carrier without the JTAG and FFC connectors
Product Description – EB Hardware
Version: 20.10.2014 Confidential Page 9/12
EB x1xx hardware series:
Fixed amount of hardware interfaces
Powerful 400 MHz µC
2 × FlexRay controllers in FPGA
EB 6100 (in-car use) EB 2100 (desktop use) EB 5100 (modular slot card)
2 × FlexRay
2 × CAN
1 × LIN
2 × FlexRay
4 × CAN
2 × LIN
5 × physical layer module slots for FlexRay, CAN and LIN
Automotive robust housing with ODU connectors
Temp. Range -30°C to +70°C
Desktop housing with DSUB9 connectors
Temp. Range 0°C to +50°C
PMC standard board with adaptor boards for PCI, PXI, cPCI, PCIe
Temp. Range -30°C to +70°C
EB 6100 detailed hardware specifications:
High-performance Freescale Microcontroller MPC5200B with 400MHz
2 × 10 Mbit/s FlexRay (TJA1080 or RS485)
2 × high-speed CAN (ISO 11898-2)
1 × fault-tolerant CAN (ISO 1189-3)
1 × LIN
4 × analog input channels: 10 kHz sample rate, 12 Bit resolution, 0 to 20 V
16 × configurable digital input or output channels
PC connections via Ethernet, USB 2.0 or RS232
Altera FPGA Cyclone EP2C70 with 256KB SRAM
Supply voltage: 6,5 V to 30 V
Robust automotive housing • Measurements 150 × 100 × 25 mm • Protection category IP65 • Guaranteed ambient temperature range: -30° C to +70° C
Reliable high-quality ODU connectors
Low power consumption (~5 W)
Delivery content:
EB 6100 hardware
Product Description – EB Hardware
Version: 20.10.2014 Confidential Page 10/12
USB and Ethernet PC connection cable
Power supply
EB 2100 detailed hardware specifications:
High-performance 400 MHz Freescale microcontroller MPC5200B
2 × 10 Mbit/s FlexRay (TJA1080)
3 × high-speed CAN (ISO 11898-2)
1 × high-speed or fault-tolerant CAN (ISO 11898-2/ISO 11898-3)
2 × LIN (TJA1020)
4 × analog input channels: 20 V
Optional: 2 × analog output channels, 10 V, 10 mA, 1 ms full-scale,
4 × digital input channels, 0 to 5 V
Optional: 0 to 12 V, overvoltage protection, galvanic insulation
4 × digital output channels, 0 to 5 V
Optional: 0 to 10 V, overvoltage protection, galvanic insulation
PC connection via USB 2.0 or Ethernet
Altera FPGA Cyclone EP2C70 with 256 kB SRAM
Supply voltage: 8 to 30 V
Light weight housing
Measurements: 180 × 110 × 40 mm
Environmental temperature range: 0°C to +50 °C
Low power consumption (~5 W)
Standardized D-sub-9 connectors
Delivery content:
EB 2100 hardware
USB PC connection cable
EB 5100 detailed hardware specifications:
High performance Freescale MPC5200B Microcontroller with
400Mhz 32MB SDRAM / 8MB Flash
PMC standard based board designed to be mounted on PCI,
CompactPCI, PXI, and other carrier boards
5 slots for physical layer modules
Physical layer modules available for • FlexRay (NXP TJA1080) • CAN high-speed (TI SN65HVD234) • CAN low-speed (AMIS 41683) • LIN (NXP TJA1020) • 6 × digital configurable input or output channels with ESD protection
- maximum output current/channel: 24 mA - output voltage: 3 V - input voltage: max. 5 V (TTL)
2 × FlexRay E-Ray Controllers in FPGA
Reliable high-quality ODU connectors
USB 2.0 and RS232 PC interface
Delivery content:
EB 5100 hardware
Product Description – EB Hardware
Version: 20.10.2014 Confidential Page 11/12
EB 5100 extension modules
Physical Layer Module Description
EB 5100 add-on: PhysicalLayerModule_FlexRay
Single channel FlexRay Physical Layer Module. - Mounted FlexRay V2.1 transceiver: NXP TJA1080A - Push-pull 5-pin ODU connector Delivery Content: - 1 × Physical Layer Module - 1 × ODU Connector unassembled
EB 5100 add-on: PhysicalLayerModule_CAN_High_Speed
CAN high-speed Physical Layer Module. - Mounted CAN transceiver: TI SN65HVD234. - Push-pull 5-pin ODU connector Delivery Content: - 1 × Physical Layer Module - 1 × ODU Connector unassembled
EB 5100 add-on: PhysicalLayerModule_CAN_Fault_Tolerant
- CAN fault-tolerant Physical Layer Module. - Mounted CAN transceiver: AMIS41683. - Push-pull 5-pin ODU connector Delivery Content: - 1 × Physical Layer Module - 1 × ODU Connector unassembled
EB 5100 add-on: PhysicalLayerModule_6x_DIO
- Physical Layer Module with 6 digital configurable input or output lines with ESDprotection. - Maximum output current/channel: 24mA - Output voltage: 3V - Input voltage: max. 5V (TTL) - Push-pull 7-pin ODU connector Delivery Content: - 1 × Physical Layer Module - 1 × ODU Connector unassembled
EB 5100 add-on: PhysicalLayerModule_LIN
LIN 2.1 compliant Physical Layer Module. - Mounted LIN transceiver: NXP TJA1020 - Push-pull 5-pin ODU connector Delivery Content: - 1 × Physical Layer Module - 1 × ODU Connector unassembled
EB 5100 add-on: PhysicalLayerModule_FlexRay_GalISO
Galvanically isolated FlexRay Physical Layer Module - Mounted transceiver: NXP TJA1080A transceiver - Galvanic isolation with three SHARP
Product Description – EB Hardware
Version: 20.10.2014 Confidential Page 12/12
PC4D10SNIP0F optocoupler - Isolation voltage 1kV - The galvanically isolated FlexRay module occupies 2 extension slots on the EB 5100 board - Push-pull 5-pin ODU connector Delivery Content: - 1 × Physical Layer Module - 1 × ODU Connector unassembled