Embed Size (px)
Citation preview
Bel-Ray (+ampany, Inc.P.O. Box 526 • Farmingdale, New Jersey 07727 U.S.A.
TEL (732) 938-2421 • FAX (732) 938-4232www.belray.com
BEL-RAY® MULTIFLEET MOTOR OIL 50
Bel-Ray Multifleet Motor Oi150 is a single grade engine oil, providing superior lubricationperformance in heavy duty diesel engine or gasoline engine applications commonly found in themining, transportation and marine industries.
Where API Service Classifications CF-2, CF, CD-II, CD and SJ oil isrecommended
♦ Recommended for use in diesel engines manufactured by Allison, CAT,Cummins, Detroit Diesel, Ford, GM, John Deere, Komatsu, Mack, Navistar,Volvo and many others
♦ Recommended for most naturally aspirated or turbo charged gasoline or dieselengines used in passenger cars, vans and trucks
Features and Benefits♦ Deposit control Dispersancy controls deposits and wear to extend engine
life and allows for extended intervals between overhauls.
♦ Oxidation stable Protects against undue oil thickening, allowing for longerdrain intervals and lower operating costs.
♦ Superior protection Protects against wear and scuffing of highly loadedcomponents during boundary lubrication conditions.
General DescriptionBel-Ray Multifleet Motor Oi150 is manufactured using premium base oils in an optimum blendof the latest technology of dispersant, detergent, antioxidant, anti-wear, corrosion inhibition,viscosity improver and defoaming additives. It keeps the engine running clean and at peakperformance. Bel-Ray Multifleet Motor Oil 50 is perfect for the fleet operator wanting onemotor oil for both diesel and gasoline engine services.
Product No. 61I00TTPage 7 of 2 4/6/2009
With cortlinual research and development, Bel-Ray Company, lnc. reserves the rlght 1o change the informationcontained herein. The Company ir not responsible fos misuse or miaapplication of rts produUs.
BEL-RAY® MULTIFLEET MOTOR OIL 50
TYPICAL PROPERTIES
Product No.
SAE Engine Oil Grade
Viscosity, ASTM D445@ 100°C,cSt
Viscosity Index, ASTM D2270
Pour Point, ASTM D97aC(°F)
Total Base Number, ASTM D974mg KOH/g
Sulfated Ash, ASTM D874Weight %
Flash Point, ASTM D92aC(°F)
Color
61100TT
50
20.9
115
-18(0)
10
1.2
249(480)
Amber
Page 1 of 2 41612009R'i!h continual research and developmercf, Bel-Ray Company, Inc. re,serves the right io change fhe informa(ion
con[ained herein. The Company is nof responsible for mi,sarse or mi.sapplica[ion ofits products.
JUN-09-2099 02:28 raM
® 111e14ay Company, Inc.cotrttnwrlr6HcaKtstlWiwoe
^!r P.O. Bcx 526, FaminptlBle, New Jersuy 177727^ Phanel4oa1936-2421•Faxi9nR1938-423^
MR2 1iIC",EI PERFC]R>l1ANCE AyAR:I1VE 2-('Y(:L,E ©IL
P.02
p
Bel-Ray MR2 Iilgh Perfortnance Marine 2-Cycte Oil is 1 trt:lv soperior, higltly refined lubricant for use inhigh performanoe or general purpose marine anA per.sonal wntercr;ttt cngines.
APPI.ICATIONS
, Premix or injector/autolutte syStems
, Air-cooied or liquid-coolctt ertgirtcs
, Where a TC-W, 'CC-W 11. or •TC-G1' Ill i5pc oil is specified. ltal-Ray MI12 tligh PerCormance Marine2-Cycle OU is NMIviA Certified for wrvices'TC-W. 'i'r,:'• W Il. artd 'fC;-W Il'I at the cngine manufacturer'sreccsmmended fuel/oil ratit>.
OTIIER FEATURESClean burning--Bel-Etuy M1t2 lilgh Perl'ormance Marine 2-('r•cle Oil's hiehly c:ftit:ient, no-ash detergent/dis-persant system means cleaner, longer lasting en,-ines which pert'orm hetter antl requlre less maintenance. Bel-Ray 1VIR2 High Perfornianr.e Marine 2-C:ycle Oll reduces sl;urk µlut fouiin7; ana visible ex.haust smoke.
Excellent Anti-Wear--The contbinaticn of hil;h grade hasc uil ianct st<itc.-of-fhe•art additive chemistry resultsin an oil with outstanding filni strength iind wrc:ar preventioli. Entines lYaforrtt 1onger itnd hetter as criticalengine tolerances are maintairted.
Maximum Corrosion Protec.tion--Bel-Ray Mit2 iIigh PerfUruutnce A'Inrine 2-Cycle O il employs the mastoffective corrosion inhibitors to fight rust in lnttrtne enl;ine.,i.
_1•y'1,I(_A[. PLiQ.!'.l^i?'^^41^-`iFinished* N^._I_itb_ric;ttilV iscosity V iscosi rr
tigilSiJs ®]DQeF 300 SU5 r 1(n)'FcSt 0 40°C fA.E1 St)S 2:0"T 70
Potlr Point -261F/-32 c5t (& rt(t"t' 146.8Flash I'oint 4t7t1'Fr2051c: c5t !ri It)ti'(' 12 t)Ei
Visc.usiry lniir:x 951'ottr Pnint 15°TI-9°CFlash 1'oint 475"F'/246i°C':
bltay NtRI HiKh Performunce Marine 2-Cyclc (lil cuncain, a ta,lucnt rnr lnw iernpurature suluhility.Pa;c lot 1 0T'07'9:'.
Wiih cnnrinual reranrv:h ind doV.:laprncort, HeI-n,Fy C'.n:q:.u. bw., ruio:^•^•.,: tn,, .y;dn. i.. viln.i•.I,•r: tnlLrroabou enn'^tuud hcrcin: 1111: e.nniP:tnY ir
nnl R'>,^!^mil,le 1.•.r mV^ubc crc tnistpl,lh_.:u-,.r : n i::; t!r•aducla
NOV-19-04 WED 99:19 BEL-RAY TRINIDAD LTD- 1 899 623 5729 P.64
_ p .^
II.. .
^
Bel-Ra,y C^ompany, Inc.P.O. Box 526 • Farmingdale, New JerSey 07727 U.S.A.
T6L (732) 938-2421. • FAX (732) 938-4232www.belray.com ^
BEL-RAY® AMBER EP GREASE
Bel-]ta.y Amber Ep Gnease is a Series of high temperature greases with extreme pressurcproperties for heavy load applieations.
A^rplicattotrs_---
♦ Abnormally+vetenvironments
• Autoinated and centraliud greasing systems
_Fe_atrrres amd Benefrts _♦ Organo-clay thickener
• No filler or solids
♦ Rust and corrosion inhibited
♦ Anti-wear propertiee
* Extrente pressure properties
♦ Oxid:ttion resistanae
♦ Adhesive
♦ Waterresistant
! Mechanically stable
High dropping point.
Will not plug automated systems.
Good equipment protectioit.
Reduces friction and wear.
Resists shock loads.
I,onger lubricant life.
Remains on equipment.
For wet applications.
Retains consistency.
Gerreral}3el-Itay Amber b',P Gr+eese is a general purpose, non-meiting grease thai is formulated for
optimuin anti-weat pcrforrnanoe, extreme pressure performance, water resistance, adhesion,
mechanical stability, corrosion protection and oxidation resistar>ce. Bel-Ray Amber F.P Cirease
is designed for use in plain and anti-friction bearings served by central greasing systcrosoperating over a wide temperature range and wider abnormally wet conditions.
Prafuct No. 5570, 5572, 5574
PaBt 1 qf1 n9^olnaW+Ih ta+urtaql reseqrch n^ dewlupmerti. Be7-AaY+^amFqrry, lrtc. reesrser rhe rigAt+a thq>r(fr tM1a irSPOrn+orinn
(yMtqiAtd INlBIA 7h• Compqny is nai •uponsi6fe firr mtrase or mimââli^iqr of v.r prodqcv.
NOV-10-04 WED 09:20 BEL-RRY TRINIDRD LTD. 1 809 623 5729 P.e5
^. BEL-RAY® AMBER EP GREASE
TYPiCA,L PItOPERTII;S
1'roduc( Na
^ NLGI Grade
Penetration, worked (60 Strokes), ASTM D217mm/10
Thiekcner Typc
Viscosity (Base Fluid), ASTM D445@ 40°C,cSt@ 100°C, c5t
Viscosity (Base Fluid), ASTM D2161@ 104°F, SUSa) 210°F, Si3S
Dropping Point, AS'PM D2265^
(°1')
Copper Strip Corrosion, ASTM D404824 hrs ® 100°C, rating
^ Oxidation Stability, ASTM D942Pressure drop @100 hrs, kPa (psi)
4-Ball EP Test, ASTbI n2596Weld Load, kg
4-llall WearTest, ASTM D2266©1200 rpm, 40 kg, 1 hr, 75°CScar dianicter, ranl
Rust Protection, ASTM D1743, rating
Flash Point (Base Fluid), ASTM D92°C
(°F)
UseCul Tcmperatifre Range^
(°1')
Color
5570
1
315 275 235
Organo-clay Organo-clay Organo-clay
177 17716.2 16.2
933 93384.8 84.8
>260 >260(>500) (>500)
lb lb
20.7(3) 20.7(3)
315 315
0.8 0.8
Pass Pass
258 258(496) (496)
-15 to 204 -15 to 204(51o 400) (5 to 400)
Red Red
M72
2
17716.2
93384.8
>260(>500)
Ib
7.0.7(3)
315
0.8
Pass
258(496)
-15 to 204(5 to 400)
Red
59 74
3
Prtga 2 n/2 01'01 191Wqq [anmmai rnaeftq RndEn'elopmsnL Hel-P.ay (;anpony, lnt, reserves t8e rigqf fa eqange tqe inJbrmaiion
^, rnmamedFerek rkx compa,9w ,=nar.r:ponsu>e,rarm;sv,eor.w,ppr imrionoJlrsprodsnr.
•y^all^^.www^^i,:^^^P^^^
SUN-25-52 TUE 9£::46 BEL-RA`r' TRINIDAD LTD 1 c:^3^ r_̀.?.? 5725 P. 02
LO !
I<3FI.-RAY C:()PYIIPAI"+1Yp INC'.
Tatu^, Pqohxni.rl.r,e,Luhh.iwm;a
/f
.^f
._.. . -^^.
BEL-1tAY ANTI-WEAit LUI3RTCAtVT SE1UES
Bel-Ray Anti-Wear Lubricants are high quality, turbine-type oils offered in abroad range of viscosities for bearings, hydraulic systems and light service t;e.arbox applications. These outstanding general purpose oils are formulated for longservice life while completely protecting the equipsnent from nrst and corrosion.
Bel-Ray Arnti-'Wear Lubricants offer signifrcant protection, which is a beneht torztost applications. '1`he MBall Wear Test reported, clearly demonstrates tltis:tcivantage. After a one-hour run with a 40 kg, load, the wear scar is very sniall.A non-treated oil would not carry the load and tnany competitive so•called anti-wear oils will have wear scars many times larger.
By using highly refined base oils that inherently have excellent chernical stability,t}hc A3el-Itay Anti-Wear Lubricattts are enltanced with chemical staUilizers thatpertnit long service .life.
In apialications experiencing extreme churning and agitation, such as hydraulic anclgear redttcer, trse Bel-Ray Anti-Wear Lubricants.
1Whea water contatninates the oil, the water repellant property of tlie Bel-RayArtti-Wear Lubricants causes prompt separation, or standing, for easy rernovaI.
The outstanding low tetnperature tlow of the Bel-Ray Anti-VVear Lubrictutts carroften eliminate the need for special oils to combat low wintertirue tenxperatuees.
`1'he,sc are tntly luglr quality, general purpose oils, for a broad range ofapplications,,including: general bearing lubrication, hydraulic systems, rotarycomf,ressori ;' Iiglit duty gear reduc.ers (use recomznended AGiMA nurnber), purnplrearings, heat transfer and circulating systems, and turbines and spindles.
1?age 1 of 2
L'el-Ray Ccsfflp Ay, Inc„ P.O. f3ox 526, Far'mingda!e, New Jereoy 07727, U.$,A-.- _ .. .,,,, ,,,,., F:u; [90913.38•A232
IIIsL.RAY ANfI-WEAR I.TIBIiICArtI' SE1tIFS
TYP L PRQP-ER'171-3
C,Rrade 1*io. 00 0 1 ^Z 3 4
ACsMA Lui.xicant No. - - 1 2 3 4
Eclual to SA13 Gear Oil Grade(.P'sL-I & 2 Only)
E,tlual to SA1; lrngine l7il Grade
Visc45ity
ASTIV Ta 445cSt a ]00 °FcSt C 210 °F
ASTh4 17 2161sC1S 100°FS(JS f^ 210°F
Viscaaity in(lex, AS'I"M U 2270
Loai3 (.arrying Alxility4-F§all Ci', AS°t'N6D 7783
Weld L,aad, kg., NBin.4-13a11 Wear TPst, ASTM A 4172
1 Hr., 40 kg. I.oad Scar Diam.h....•.^-.
Poar Po[:at, °F ASI'M IJ 97
t"lash I'oint, F,ASTM D 97
Neutraliaation No., ASTM 1) 974
Turbine Oil Rust Tcst, AS'1'M D 665r7rncedure 13, Synthetic Salt Water
Oopper Corrasion, ASTM D 130
V:ckers Pump Wear '4'est
1'oa„n Test, ASTM D 892
I)emulsibility, AS'TM D 1401-'Mlnute.s for Cotnpiete Separation
Itetn Na.ti
5 6 7
5 6 7
75W 75W 75W 8UW 80W 85W90 5W90 g0 1405W lOW 20W 20W 30W 40W 50W - --
22,85 32.12 45.20 73.4 110.0 169.4 220.85 218 431.84.18 5.23 6.29 8.51 11.06 14,6 18.5 23.70 28.6
110 151 211 340 510 785 1023 1500 200040 43,4 46.8 54.1 610 76.3 92.2 114.4 1362
104 102 94 97 95 93 101 100 93
100
.44
-30
390
.05
10`J 100
.44 .44
-25 -25
400 415
.05 .05
100 ]00
.44 .44
-20 -20
450 485
.O5 .05
]00
.38
-15
505
.06
100
.38
-5
,560
.07
----°----_----------24 Hrs./No Rt
IA lA IA lA lA IA
Pass Pass Pass Pass Pass ---
Nil Nil Nil Nil Nil Nil
100
.38
-15
525
.06
100
.38
-10
540
.07
IA lA lA
Nil Nit Nil
... 15 20 --- 40 - 50 ---
5612 5614 5616 5618 5620 5622 5624 5626 5628
02193Pa^o 2 af 2 .
With continuP.l resewrch and deVelopment, Bel-Ray Coinpany, Ina, reserves the rigbr tn ;e infolmation contsiateJ
Lereiai; the cotitpany is uot respor.sible for misuse or misapplicatl', roducts.
qUG-07-03 THIJ 13:11 EEL-Rl-iY TftINI â HL Lr â . 1 309 t__ _•^: p•,c+-1
Be1^Ray ComP>^^PO. 8ox 526 Farmingdale, Nevr Jersey 07727 U.S,A. MMI II1
NNNULL ^E.1TEL (732) 93B-P4?t FAX ('7'^2) 838-4232 1̂ I^,^Y^VV 1W^wv belro-ycom
BEL-RAY 21st CENTURY M.OT(.)R OIL
13e1-Itay 21st Cetttury Motor Oil is spccitlcally developed for extended oil deaictservice, provi.ding superi,or lubrieation pe,rformance in heavy cluty diesel engine orgasoline engine applications conunonly fou.nd in the niining, transportation alyd mariv.eindustries..;.^DL)^tCGli07t5 _ _
♦ CVhere APT Service Classiftcations C'1-4, CH-4, CG-4, C:R4, CF-2, CF, araii SI., oils arerecornlnendcd
♦ Recontmended for use in diesel engines maiufactured by Allison, CAT: Cutttnlius,1)ctroit Diesel, Ford, GM, .Tobn Ikere, Komatsu, Mack, Navistar, Volvo and rtLr.nyothers.
t^...^-
A liecomtncndcd for anost naturally aspirated or turbo clharged gasoline or diescl engincsused in passengcr cars, vans and trttckso T)etroit Diesei 2-Cyclc and 4-Cycle eaigines (except series 144)♦ Meets Volvo VllS-2s[n Mack eof=,ines EO-M, EOL, Plus, i:U-K2 (15W-40) and F.O-L
♦ Meets Mereedes MTiJ Type 1 and Type 2
a Where Allison C4 and C3 fluids at'e rcduiredt Mects CAT S-2, TO-2, 1K, 1N, IG2 a.IM-PCFe(rtttres rintl Beu ^ts
♦ I)eposit control Dispersancy controls deposits and wear to extendenginc lite and allow for i-ncreased overhaul intcrvals.
♦ Oxidation stablc Protects against undue oil thickening allowiug (br iont;crdrain intc.raals, loweri.ng operating costs•
♦ Su.pcrior protection Proteets against wear and scttfiing of higbly loadedcomponents during boun_&ry lulxicarion conditions_
C:erreral DcscriC+tion13e1-Ray 21st C'eotury Motor Oil is manufactured using premium base oils in an optirnal
bleaid ofthe latest technology ofdispersant, detergent, oxidatiott irthibition, nnti-vvear,eorrosion inhibition, viscosity itrprover and defoaming additives. With a standard Z1iN
of 10, tlris product i.s adjustable to a TEIN of 14 for use witb low quality tilels and in
extended oil clrain intervals.
Prorlrrct No. 6132, 6134, 6136, 6138, 6140, 6144, 6148, 6.158, 6150PaSe100 B Yrv. 821) s;Vt
s (F'(th can[tnaral resenr<h ond tlPveh+Prnent, Bel-Ruy Cmnprrny. tnc. re•sxree.t +6e rigdr to chwrge 4(Oor mooo!
^ eanl[ilned her'eiN: !he ronipany ie r nnr^prqeiAle for mistae nr nrls'applicatioru f it pr -dr.rtcS<.
+F1UG-+77-E+3 THH 13::11 FEL-RR't TP.INILiHL LT â
^
^
^
1 B©9 E.23 F, i,.c:
BUL-RAY 21ST CENTURY MOTOR OIL
TYPICAL PROPkRTIES -_ S.INGLE GRADF..Si
Prodeict No. 6132 6134 6136 6133 6140
SAF3 Grade lOW 20 30 40 50
V"iscosily, ASTM D445(a), 100°C, cSt 5,3 8.5 11.3 15.9 70,9
Viscosity In(lex, ASTM b2270 102 102 102 100 1.0()
Poiir Point. ASTIv1 D97 -31 -23 -2l -I8 -lft°c (-24) (-10) (-5) (0) (0)
(°TL')
I'otal F3au Number, ASTM 7)974m.g KOH/g 10 10 10 10 10
F'lash Point, AS1 M D92°G 193 199 210 224 227(°F) (380) (390) (410) (435) 041)
Sulfalcd Ash_, AS'TM D874weihht % 1:2 1.2 1.2 1.2 1.2
F'alcx fil' Tcst. ASTM I)3233 Method f3Non,eiTlm load, lb1' > 2500 - 2500 > 2500 > 2500 >2500
inPI Scrvicc: A,kl except 04, CH-4, CG 4, CF-4
3agsT qf3 Rto_ r77.'(Liv/
6Pifh rnn!lnVPf r'eseurGN mrd d¢uah;prrrrnl, Sel-Aqc t_.-onqmrr^, ing, reserve9 !he ri,Qhl (u ^ p^nee ir+bvinatiu:^
1 HlJ 1 3 ] 1 2 EEL-RF]'f TRI H I IiR â L I D
i
Pr'vtluctNo. 6144 6148 6158 ¢I;40
SAIG (',ratie JOW-30 lOW-40 15W-40 20W-50
RI±:E,-.RAY 21SrI' Ck,NTUItY MqTOR ULl_.
TYPICAL P[tOPERTIES -- MUI; CI GRAI7ES
Vincosity, AST'hl ll,445Cr; 100°C, cst
Viscosity 1[tdex, ASTM 1)2270
Mariarunt Low-1'cntlleratutE. °(', PumpingViscosity < 60,000 cP, A.STM'D4684
1'ottr Point, ASl'lvl D97n^
(`I')
Total Base Nuntbei, ASTM 0974
ttlg K011/gz
1'1ash l'oint, ASTM D92V,c
(`'r)
Stil.Pated As1.1, ASTM 13874
weight °ir
Falox FP'l'est, A.9"i`M I)3233 Method }3Nonsuizure l0ad, l.bf
11A
l48
-30
-37(-35)
lU
193(380)
1.35
7 2500
1 1-09 F.23 57_ta !-'. N9
15.4 16.0 18.9
154 151 127
-30 -25 -20
-37 -30 -?.f;
(-35) -22 -15
10 14 10
193 199 202
(380) (390) (395)
135 1.35 1.35
> 2500 > 2500 ? ...500
2 Bc1=Ray 218t Contucy Motar C)il is availabla with `lotal Qase Nutttbus other than 10^ 7he most
cantntoEt. adjusbliettt ig to Total Base Nutnber 14.
Re^. n?,tl ^srr: ^e 3 f
ennfiNlkrl reJPprrh dnrf dcc'elf.pnt¢nl, Ber-Rny' Cnmp nv !no i'^'a rroo eFe rlgN1 f I chd ^g'lnlNrn:atinn
. .:ratmqnlharalre; rhe somprtny Lr nnf rr.epnnsille fnniruse wnJsnPPlirnflnn nflls frnduefs.
6EF--0il!I FRI 13:01 F6EL-Ri4Y TRINI â R â LT â
G ` . .. ^
T,
;-^i^
PFiOpUCT DATA SHEET
-1. .
1 30 9 c2.-- - 1._9 F'.+.:1]
^.
BEL-RAY COMPAN'ir', INf:::.
Lu lmi^c^ e ^^^4III%^'
ll{:^i
BEL-RAY COMPUVAC OIL SEIttES
^-..
^
Bel-Ray Compuvae OiI Series is specifically compounded to give long trouble- W^free operation of vacuum pumps and reciprocating compressors. Its use keeps a ycompressor clean. Properly functioning machines will operate for years withontcver requiring valve cleaning. A typical oil change interval is 3,OU0 hours.However, it is recommended to establish oil change interval by monitoririg tlze oilcondition with lubricant analysis. Often, substantially longer intervals arepossible.
Bel-Ray Compuvac Oil Series is recommended for all types of reciproc,.:itingcompressors and vacuum pumps, either stationary or portable. It is recommencledfor all service conditions, but its superior performance becomes evident in beavy A.duty continuous service application. Its outstanding lubricity and chemistry assuresoptimum cylinder performanee.
Hel-Ray Compuvae Oil Series is made from highly refined, chertiically st,tbte,high viscosity index base stock. The compounding includes fortifie:d, higlitemperature, ashless oxidation inhibitors that prevent gumming, sludge aucl resirtformation in the valves and working parts of the compressor. 'I'hese ashlessinhibitors are carefully selected to impart water demulsibility, foarn inhibition andcorrosion resisting characteristics.
'1"his mak.es the Bel-Ray Cornpuvac C3il Series superior to the best A.P.I. ServiccM.S. sequence automotive oils approved for compressor and vac.uum purnps. `l hcM.S. oiis tend to emulsify with water to foam and to form hard varnislaes, Forvacuum pumps where oil acts as a seal, the higher viscosities are used an rotaryand centrifugal eornpcessors and wherever low temperature is a significant faczc?r.
I'age 1 of 2
iP!`r
^
I
.^
ielPphone 1!a^17) 93c3-2421 -'h iX: ^1141^ b.i0-ti6JC ^^y
I1EL-RAY CQM1'UVAC Q1L SERIES
TYPICAL PRUPER__TIEs
t;alracle No. 10 20 30 40
`iAF Viscosity Grade 10 20 30 _ 40
Viscosity SUS, 100°F,
AST14T Ia 2161 220 310 500 750
tliscosity Index,
ASTM D 2270 102 102 100 100
Pour Point °F, ASTM D 97 _15 -10 _5 0
Flash Poitit C.U.C. °F,
^ ASTM TJ 92 420 465 500 530
Fire 1Toint °F, ASTM D 92 465 520 550 S65
E)xidation Stability, lirs.,ASTM D 943 2500 2500 2700 7..700
Ncutralization No.,ASTM D 974 0.01 0.01 0.02 0.02
`I'urbine pil Rust Test, ASTM D 665P'rocedure A Pass Pass Pass F'ass
Copper Corrosion Test, ASTM D 1303 lirs. Q 212°F lA lA lA IA
C;onratlson Carbon, % Weight 0.15 0.15 0.15 0.2iJ1N 51551, ASTM D-189
Xtenl No. 5740 5742 5744 5746
Page 2 of 2 02I93,.----.. With coutinual reseatch aad development, atl-Itay Company. 1nc. reserves the right to change infornoAtii n wntaincd
herein; the company is not responsible for tnisuse or misapplicatioo of its products.
JL4-1-25-02 TLJE 0:3:48 BEL-RHY TF.IINI â qp LTD. 1 809 623 ^729 F.03
J f} ^
^1_1: ,: ,<y` BEL-Ii.AY COMPANY, INC.
0'f,pQ OPA.11II.L^°.
Lubhit'omA flh;
k1E]L-RA.Y DIVIInE:[2 OII, 169
I3eI-lZay Divider Oil 169 is a niineral oil which conforrns to U.S. Iaharcnacopeiaa.=,rd i.s listed H-1 by the U.S.T1,A. This product is colorless, odoriess andtasteless; atlditionally, I3el-Ray Divider Oil 169 is non-toxic, non-irritatia}g,tra.nsparent and higlily stable.
figap:rm^ ...
. Meets U,S.P. Standarcis
. H-1 L'asted
Beneflts
. High Degree of Purity
. IncidentaI Food Contact
h
^
Bel-1Zuy Divider Oil 169 is intended for use oli Roll Divider Rounders, rneatgrinders, food mixers an(i convayors; it may al:so be used as a k.nife lubricant, rustp.reventative on food processing niachinery and a mold process aid an<.I/or re.le.aw
s"x'Vo11f.
Page l. of 2BeFRay Company, Ine., P.O. Bcx 526, ^Te;ephona (908) 533-2421
I
' 11 R
^ ^ µ,I:evr,leissy 077J, 11.3.A. ^ ^ il ^ AilEart:190&) ^338^A'`1.72 if,,
JUN-25-02 TUE 0E::48 PEL-R(aY TRIP1IDFiD LTD, 1 8E+9 _'G3 5723
I3EL-1tAX DIVII)LR ().IL 169
:LYTW, AL „j%ZOPLRTIL
Spvcific Gravity 60°F/60F
Viscosity,A.ST'M D 2161
SCTS Q J 00°FSUS @ 210°F
ASTM D 445/ISO 3104cSt @ 40°C
nca^t r n
Viscosity Indeh, ASTM D 227000 2909
Flash Foint, °F ASTM D 92°C ISQ 2592
I'ire Poirct, °P ASTM D 92°C ISO 2592
k"our Poi.nt, °F ASTM D 97°C ISO 3016
Cloud Yoitnt, °F ASTM D 2500°C ISO 3015
a::olor Saybolt, ASTM D 156
If:etxt No.
k'age 2 o" 2
0.866
13545.6
39.65.91.
98
3,3 0t 93.3
410210
0-1'7. 8
-1-10-).2.2
•t 30
74<EO
10/92
P. N4
'1Vitlh continual rrsearch and deveCopt• ,t, Company, Inc., reeerve9 tlle liph hnc informalir:t
conlwnc+i lterein; t11,e aompany .s nat re^.ponsibIo for 6suso or misapplic
MRY-21-2007 09:25 PM
^...- •^
s
^^
Bel-Ray ("ompan,y, Inc.P.O. Box 526 - Farmingdate, New Jersey Q7727 U.S.A.
'TEL (732) 938-2421 . FAX (732) 938-4232www.belrav.com
BEL-RAV [IIVIDER UlL
Hel-Ray Divider Oil is a versatile. general putpose lubricant that can be used as a kniti;lubricant, divider oil, rusl protector. mold reiease agent, etc. as needed in the "clean" industriessuch as tiiod, beveragc, pharmaceutical and personal earc produets.
A IicWir^xx--^^^----..-._.._. ---•----.. ..♦ General purpose, colorless oil for non-exlreme pressure and non-anti-wear applications
• Knite lubricants, meat grinders, tixid mixers, hcwk lubricanw, textile plants
♦ Rust preventative, release agents, mold process aids
Feaberea♦ N3F H I and 3H registered
• Transparent, tasteless, odorless and coiorless
• Non-staining
♦ }ligh demulsibility
Use m heredirect rood contactl•ood contact mav oCcur.
Kosher and Pareve approved.
Prevents discoloration in textile appiications.
I;xecllent water yeparahility.
Ciene^ul 1)escri^eon__^----..___._...^_..._.__^.....- ... ..._.^..___.--Iki-Ray Divider Oil is formulated for use where a general purpose lubricant ts needed.Bel-Ray Divider Oil is available in thco (2) grades. It is tasteless. odorless and coiorless and hasexceptiortal water separability characteristics. Bel-Ray Divider Oil. fonnulated with tttu highestquality USP white mineral oils, rneets NSF H l, 3H and FDA requirernents f'or rnaterials that mayhave direct or incidental eontact with food as defned under "ritie 21 CFCt, 178.3570.lt is Kosher and Pareve approved
Pruducr Nn6 2110,2440
l^uxr 1 uJr rLWfJf 113• Wnh rnnlfnunl rMrprc'h und dre,hynnem, 14d•Rny rb®pwmt bie. rn.ve'r,r•., flrr r'rphf ru rhoaX+' Nro iMurnirt!lrwr
^ ^WOlneJ Aen;in. 7Te ('nro;umi' l., ,mr rexpa+eiAlefi>r rui.rnsv .x• nn:wrp;+firmunr u/ia, pn+ducrc.
P.02
MCaY-21-200709:25 PM P.03
^
^ ,..
BEL-RAY DIVIDER OIL
"1Yf?1CAL PROPFR"fIBS
Prerlacr Na
l1el-Ray Name Cirade
IS(} Grade
Viscosity, AS'1'M [)445(i,D 40°C, c5t(0 10011C. cSt
Viscosity, AS'fM D21614 1000t', SIJS(iia 210°r, SUS
Viscosity Index, ASTM D2270
Pour F'oint, AS'I'M D97oc
(°F)
flash point. ASTM D92nL
(°F)Specific 4ravity, ASTM D 1298, 60/60°F
Density, ASTM U1298(a> 60'F, Ib/t;xl
Appearancc
C'.olor
2iro
95
IS
16.03.7
85.0A.o
119
-Is((l)
193
(.379)
(1.842
;.I I
( lear
W:ur.r-white
2440
169
32/46
37.65.9
1(945.9
98
••Ir;(0)
:.It)
(410)
(1,865
7.22
C lear
W uter•wh ite
IS^e 1 r^J'? OdVlIIY1J. H5/h ratflmwl maeare:h ondGrrlry++w^n. 14rf-Xa^' ['^wrpuaY. Irx.^. n^..+,rvn+lhr +il;h! m cMwyp' !hr lnfarmAimx
^ Ciinlmn•d hnrin. 71w !}+^lwipr i^ +rm rea^xn.viblrJ'os mi.m.re +ir ^rri rqly+lr+^^rmm ^f ila yrndurtT
:.,r.
MAY-23-05 MON 12:35 BEL-RqY TRINIDAD LTD. 1 809 623 5729
BehRay Cvnnpany, lnc.
nu
°J. 6catlS.'M 077•I7
rww.tralM)+.tCnr
^ATA
BEi.-RAY 100 GE,At.R OIL
^
lBel-ltay 100 Geqr tHl tzpm.sents a sigaiftcant advancernent in muiti,cervioe gear oii tecbtwlogy,resulting in extremely cost-ePPoctive, high performance gear oil. It is ptnduced in a broad rang'c ofviscosiity gtades to meet nrost typical industrial and mining enclosed gears and some aati-ftic.tionbewring applications undec severe servioe conditions.
♦ All induatriai gqrliratious where an extreme pressure ge,tr oil is recommended or reeluired,e.g., gear drivas/Ieducets, worm gears, diYfetcntia]s and transtrtissions. Typical applicationsare bevel, hetringbotte, planetary and spur gears
♦ M'ming cquipnlent - dtaglines, drills and shovels where heavy laads demand a higher vi9coslty.Crades of 200, 250, 350 and 500 are available
♦ Ii"tectuc wheel motor mrvice - au excellcnt alternative to high cost synthetic oils♦ May be used in anti-faotion and joumal bearings
Feadures und Beni0 Reduced friction
♦ R.edttced wear
♦ liroad spectxwn ofvisooaity gtades
Ptovides areduction in energy consurnption, apofaiingtemperature and noise level.Sxtended ecluipment life, longer life of geats and bea»ngs,redueing tttaintenance costa.
Available iat ten viscosety gtndes to meet OEMrecotnmendations, eq[lipunent candition atultcmperature variebles.
13e1••Ftay 100 Gear Oil is a mtilti•purposa gear lubricant foxatulated with highly rcfined, laighVisaosity Indax ppar.tffmic base o ►ls. It is blend[xi with pmprietary advauced generation extrcinepregaure and aati-wear additives, along with seleet coxrosion, rust, osidatitan and foam inhibitors,rC:sultiug in ca[tified labordtoty test pasaing the 100 pound Timken load, the 12 laadiug stages ofthe F2CJ'r fiest aatd 4500 pounds on the Falex EI' tests.
FradactNo. 2140, 2142, 2144, 2146, 2149, 2148, 2150, 2152, 2153, 2159
ru,Sy j 41e Rn^. JrA'33/l'IMuk eontlned reua.tAmuf de^vbpNttrt[ Bel-.H'aYCampT^Y^ Irv. r¢ttrws da r{gletm rNaryge e4 inJtva,anaa
raivrMneAAe^M+e. n4Co^lypq'isWNrerpon.eNleJbrsrirarrnrnriry+^llciAbxd'^kpralvas.
P.02
W +
.Ann..
^ ..
MNY-23-05 MON 12:39 BEL-RfiY TRINIDFiD LTD. 1 809 623 5729
BEi.-RAY 100 GEA.R O1L
'rxPzCAr_. pROMM5,Ym&^f No; 2.140
[80 Grade
$AE (irade 80W
AC3D4A
Viscoeity, AS'Ttv[ 1N445@ 40°C,cSt(n; 100'C, cSt
Visoosity, ASTl14 D2161@ 100'k', SUS(a; 210°F, SLJS
Viscosity Index, ASTM D2270
Pour I'oint, ASTb!f 1)97°C (°F)
Cqpper Strip Corrosion, AST M D 1303 hrs @ 100°C, ratina
i'+oam Test, AST'M D892, Sequeuce I, II, IlI
Falex EI' T'est, ASTM D3233Methed A, Ilonseizure load, lbfMcthod B, Nonsaizut, load, tbf
4-Ball EI''I'eyt, AS1;4t E02783Weld Load, kgLoad WeatIndex,kg
7'imlr.en I?F Test, ASTDS D2782, OK Load,kg (1b)
F7C: "C'est, I]IN 51 354, A, StBgea PBssed
Dcnaulsibility, AST'M DL401, I br
Color
2142
150
80 W-90
4
52.S 1378,81 14.1
268 71855.3 76
147 100
P-03
ZIB,
220
90
5
22219.2
117397.7
98
-33 (-27) -30 (-22) -21 (-5)
!b lb lb
Nil Nil Nil
4500 4500 45003500 3500 3500
315 400 40064 66
45.4 (100) 45.4 (!00) 45.4 (C00
_- 12+ 12+
40/40l0 40/40/0 40/40111
Ited Red Red
P°gP 2 nI4 lnc..r.cervo.r ^Lr ripk, p^ ebunE6 ,qe ixjrx'rrtatem^WW r,avinNal rmA^'H ao+d.b,r7opmenf. Br.l-&apCxmyony,
mnroined,itrPw 7%e Ce^i+ noi re+^nM'Dhf.^rlnieuse wmiNgf^kvdM nj lp Prciducu.
Nmv 717/I1'01
MRY-23-95 MON 12:39 BEL-RraY T2INIDFID LTD. 1 809 623 5729
, BEL-RAY 100 GTA"AR OII,^XTMCA,L P$QPBRTIES
Pradluca No. 1146
1S0 Grsde 320
SAS Gracle 140
AG.MA 6
Viscosity, ASTM D445(&) 40°C, cSt@ 100°C, eSt
Viscosity, ASTM D2161Ca 100°F, Si7S(a? 210°F, SUS
Viscosity Index, ASTM D2270
Poar Point, AS"CM D97
'C (-F)
Copper Strip Corrosaon, ASTM D1303 hrs Q 10(rC, rating
roarn 7eat, ASTM D892, Sequenee 1,11, III
balex F..P Tcst, ASTM 03233Iwlethoci A, Wonseiztme lasd, lbfMethod 13, Ir'onseizure Inad, lbf
4-Balt EP Test, ASTM D2783Weld Izad, kgLaad Weat Index, kg
7imken Sr Test, ASTM D2782, OK Load,]U.' (1b)
FZG Test, Dll`' 51354, A, Stages Passed
DemuLvbility, ASTIvI D1401,1 hr
Color
214?
320
85w-140
6
341 32125.0 24,4
1818 1708134.4 121.1
95 97
-12 (10) -24 (-10)
lb !b
Wil Ni1
4500 45003500 3300
400 40068 68
45.4 (100) 45.4 (100)
12+ 12.+
40140/0 40140l0
Red Red
'^^^3 png^."' 3 oJa^ W'N umdruml rxreaKh add^lcp+kaf. B¢f-Rdy CourGOnY^ lnc. re.rerver 1h^ riy^MS m d,ru,ge 1he iiJt,»iaRon
cnnfnirudher[Iw• 71YeCa^p9i.nxrespmu!lJrfvrmJs^rormteapptiootionoJfxpmdir.ec.
P.04
V±{8
460
140
7
44529.7
238414ti
95
lb
',Vil
45003500
40069
45.4 (i()0)
124
40114W0
1'Luti
8eu. fmJ3A"r
MAY-23-05 MON 12:40 BEL-RAY TRINIDAD LTD 1 809 623 5729 P-05. . .j,... I.
^ $EI^-RAY 100 C:EAR OIL^7YPICRL PROPERTTLS
^•"'"'`.
^^.
^ .
emgjLct No. 2150 2L52 21S,3 2^,51!
1SQ f;tade 680 1000 1500 --
SAE Cmd.e 140 250 250 --
ACrAfA 8 8A 9 l0
Viscasity, ASTIvI D445(aD 400C,cSt 688 984 1402G]00°C, CSt 36.5 47.7 56.5
Viscosity, A STM D2161(a; 100°F, S`CTS 3736 5364 7725 T@l}@ 210°F, S[TS 178 232 275 509
Viscaaity Index, ASTM D2270 87 92 87 107
Pout Poitlt, ASTM 1)97^C (OF`) -4 (25) -0 (32) 5(41) 001)
Copper Strip Corralion, ASTM D1303 hta Q 1000C, rating lb lb lb Ib
Foarn Tcat, ASTM D692 , Sequenee 1, II, III Nil Nil Nil Nil
Fa1ex I?P Test, ASTM D3233Method A, Nonseizutn laad, lbf 4500 4500 4500 4500Method B, Ncauseizure load, !bf 3500 3500 3500 35(l0
4-Ball F;P Test, ASTM D2783Weld Load, kg 400 400 400 400
l,c ad Wyau ]qdex,kg 73 75 '75 76
Tltuken EP Te,st, A3TM D2782, O1C Load,k8 (!b) 45.4 (100) 4S,4 (I00) 45,4 (100) 45.4 (]00)
FZG Test, l]1N 51354. A, Stages Passed 12+ 12+ 124• 121
Deimilsibililty, ASTM D1401, I hr 40I40/0 40/40/0 40/40,10 4040/0
Color Red 12ed Red Recl
Hag° 4 nf! .(„c. naeNa.v Mr rgW [° cMige ohe Lfnrmu^^nie:N cankunr^ ^'rxe°nA mrlderc7°pr°rnu
na r^^I°r xvswe a m(.s°PP^O^°" °lra praducv.c•°nraLladheYtL,- 1LrU+^p°ay fU
.Qrv. /RlilO!
r
--^
rtts le e.
f •'^ F^^ ^^ I".,^^^ i,
IF
! a.
li s
^ F s '-
MON 14:39 BEL-RAY TRINIDAD LTD
rEtNMIcal
1 809 623 5729
PAGES 2770 - 2774
P.05
BFL-RAY COMPANY, INC.
NuuRr,M TT.Wpe%0tun.8.n.r,e
M0LYLUeWSS"Yf1#A*500, 501t 502
Noh-melting Molylube Greases withexeeptional mecianica an ermalstability for applicatione exposedto,broad tempeicature ranges andhostile`environments.
Mr,7vTF.}ia ®
^The,solid,lubricant that withstandsextreme;;pressure,"that absorbs shockloads.-,Contains Molylube, the solidlubri,cantthat'reduces friction andwear.^'iContains Molyl'ube, the lubri-cant to reduce sliding friction.
,
X
OO Greasea - When exposedee emperaturesr retains
h 1ti and
-4olvl
page l of 2 Pages
^
tneir-ssructure, wxt out me ng ,dr3;^ping^from the bearing.;y .
. . ..,I,w,.. . . .... , .
Broad Temperatuxe Ranga_
Ntol,ylube 500 Greases are useful fortesnperatures--from -40°F to above400°F.s`The maximum temperature de-pends upon the Crequency of relubri-cation. yMolylube, the remarkables0lid lubricant remains stable andan effective lubricant to BOOaF.
Mechanically Stable
When exposed to difficult appli-cations, they retain their con-sistency and resist softeninyand bleeding when worked hardor churned.
Chemically Stable
Mol lube 500 Greases are madewi^Fi g i^fincT wax-freebase stock and fortified,witlladditional stabiliaers to assurelohg useful li£e.
Chemically Itesistant
These non-soap base greasesolten are more resistant to ad- 'verse chemical environmentsthan are soap base greases.They resist more readily sol-vent extractions and chernicaldecomposition. In the most se- Rvere applications, Molylube re^.-;mains to protect the bearings. ,
Uses
Sliding surfaces, thrust bear,-
ings swivel joint couplings:High performance general pur--pose grease. Heavy duty hot
t'-f -isliding, sleeve and an x i ction bearings.
lij
,.
Bel-Ray Company, I nc., PA, Box 628 Farmingdale, New Jersey 07727, U,SA.
Telephone (201) 938-2421 Telext 132476u1^n^cl^;;
=E-10-03 MON 14:40 BEL-RqY TRINIDqDLTD_ 1 809 623 5729
^ P.06. , , • . ^, , i . .
y I .f 4 ^ .
^ 9•. ^ . . i . ^
I
. . ^ ,,. • . ^i, ^ ' '!,. ...
L;̂
MOLYL11Hli 500 GUASI:;s500, 501, 502
(Continued)
Available in Four Grades
Molylube.500,.Grease,for low temperatures & high speed.M ". .Y... i' '. .
,Molylube 501,Grease for automatie equipment and CP Greaees.,
Molylube 502 Grease fnr hand gun and high temperatures.
yU4•' Niolylube 503 Grease £or heavy duty, high temperature^f (Molylube•503,described separately).
I.r^:rG• ?TXPIChL PROPERTIES
^ 500 501
NLGI Grade 0 1
Penetration 365 315
^w ,rworked €atability 8!! ^' +1'';rC^tange 10,900 Strokes
eo Drop ^ Point
13ase.FluidVisaosity, SUS @100°F
Flauh Point, °F
Pour Paint, °F
Mol.ylube %
Ccr loz
Minimum Useful Temperature, °F
I
^
r.
I' P.a `1e 2 o£ 2 Pages
^.6;? J 7`7^..:'^;s`•^ I Iw^
a
None
300
360
-40
3
-40
5
None
950
470
0
3
Dark Gray
-10
a
502
2
270
5
None
,
950
470-
0
3
+io
I^
. ....,. ^ 161,
SUN-23-2006 09:36 PM
L^': /,p
^..Bel-itay Company, Inc.
P.0-!ar S26 I k]rfmnGhWe. Nfiw „utea9 07727 u.S.A.'tFL ( 782', 438-2421 . FA% ()72) 031t-A27a
'wwwtlBlrgrA;4nl
3
DA^TAUBEL-RAY PNEUMATIC TOOL LUBRICANT
Bel-Ray Pnoumatle Tool Lubrieant is designed for eevere sotvice in pneumatically operatedtools, controls and seala. It eliminates gumming, rusting and emulsions that cause valves to stickand toola to wear.
♦ Pneutitatie tools-cbippets, drills, hammera, nut-runners, sandenl, acrnw drivera, torquewrenCbe9 and other types af pneumatically-0perated, reciprooating or rotating equipment
♦ Airline, eylinder lubrication, spray mist, oil cup, splash, or autoanatic dispettsing equipntentand cotttral oiling or cist;ttlation eystems
Fooursa and BeneJlfs^ • Reduced oil consumption
• Improved anti-wear
♦ Low 89ction chataeteriatics
♦ Cleaner envirorunent
GeacralBeMiiry Pneumatic Taol Lubriownt is formuiated to sustain a bibricating fiim evon in thepreaence of excessive oottdenaed moisture. It offers gupetior ptntection throttgh a thln filmoontaining a uniqtu blend of atni-wear, exfieme pregsure, and titiction modifying agentsperfotming synergistiaally m combination.
Product Na 6261
F^
MIM o,>rEfqea7rwmeA u,ddtvt7op,M4 844ey GwyieKV, lnc. re.erwu tAe r10t b aAAUW Me W"aAtcneorrcdrrd InelL 1he cnAP.any 0 nne reay•ilbte/nr,nLntn nr wlrontkatten ryYaprndw.e.
Cieaner breathing air due to lees cil inbuild up of varnish or deposits.Longer setvice life of vanes, cylinders, and valves.Reduced maintenaneo co9ts tbrough fewer repairs andlower parts 9nventory.
Increased torque and redueed stattdard deviation oftorque repeatability,
Absence of smoke and noxious ftmtea reduces posaibilityof product contaznination.
IIM(NY
P. 01
JLJN-10-02rqON 1:2:05 8EL-RR'Y TRIN1LIL LTD.
1 809 52:- 5729 P 02
^Au^^.^^^,^HEL-RAY COMPANY,INC.
T^^ pe%orhma"
LuWcamfeRAYLENE EP LUBRICANTS
^
Raylene EP Lubrlcauts are versatile, adhesive, extreme pressure lubricants that permitlong, trouble-free service life. Their unique formulation combines properties that makethem eminently suitable for use in gear reducers, bearings of all types, mist systems, andon catns, ways, roller chains, open chains, and even in hydraulic mist systems. By usingthese properly blended superior lubricants, it is possible to minimize inventory and dup-licity of products, reduce errors, and buy in larger, more economical cluantities.
The high load-carrying and friction-reducing eomponents of Raylene L)F' Luhrirnrif;;reduce wear to a mininium. These properties, measured by the Falex and Tiniken testsreported on Pagc 2 compare favorably with the very best of the generally available gearoils. Most importantly, field experience confirms the reduce wear promise by thelaboratory testing. The friction fighting chemistry of the Raylene EP Lubiricants i^:often evident in reduced bearing and gear box temperatures. ln other systems, tlzesreduced energy requirements ean often be measured by reduced amperage drawn by theenergy source.
The non-corrosive and tbermally stable additive system of the Raylene PP L.ubricantsovcrcome the objections of equipment naanufacturers who caution agaiust using extrenat:+pressure lubricants. They fully protect the parts from rust and corrosion. Moreover,they Fully proteet for extended periods; for ihe decomposition product of spent oil willnot chemically attack the parts.
The tacky and adhesive nature of the Rttylene RP Lubricants permit superior lubricatiiniretention without inipairing penetrating ability or flow in a hydraulic system. Thi5,assures superior protection for ways, chain and cam applications, as well as assurir.?t,positive lubrication on start-up of gears and bearings after standing idle for sonte tin,e.5ome of the oil will adhere to the part without entirely draining to the sump or lowesbearing housing.
Mist lubrication for different bearing applications is often the solutiori for long bearirig i, 1^life. Raaylene EP Lubricants, l, 2, & 3, have been used successfully for tnany year+- il'llfor this application giving exceptional bearing life. Thermr ' -tabitity assures long 1if", uako£ these lubricants. ]t is the lubricant of choice for equipme hat has a comnion suu:lfor both the hydraulic system and gearing. ^
Page 1 of 2
^^^ ^i^r<
8el-Ray company, lno., P.O. E3ox 526, Farmingdalu, New Ju s^y o7727. U.S,A. ig, x,
TelePhone (908) 938 2421 F2r: (908) 939-02 0
.SUN-1E-02 MON 12:06 BEL-RF1Y fRINIDF1Li LTL
RAYI,RNE EP LUTSRICANTS
TYPICAL PROPERTIES
1 809 ..23 5_129 P. 0^
(xrrtde No. 1 2 3 4 5 6 7 $
f1GMA ,Lubricant No. 2EP 3EP 4EP 5EP 6EP 7EP 8ET
13qua1 to SAE EnBineOil Grade 10 20 . 30 40 50 -- -- --
l:qual to SAE Gear 85WOil tJrade 75W 80W $OW 90 90 85W140 140
Viscosity@2100F SUS 47.2 54.6 64.5 74.8 92.2 120,6 141 174CST 6.4 8.6 11.5 14.2 18.5 25.10 29.7 37.1.
0100°F SUS 201 318 483 675 1041 1588 2200 „VaTcCST 43.2 68.6 104.2 145.6 224.8 342.77. 475.0 a&ND
Viscosity Tndex 107 107 106 103 99 103 97 95
^ our Point °F -20 -20 -10 -5 0 0 0 +5
Flash'Poi.nt°F 420 440 475 490 510 525 550 560
°I"urbine Oil itustTest ASTM 665 ---------- Method B: Synthetic Salt Water, 24 hours. No ILust------
Copper Corrosion,A,S`ftiT 130 Ib Ib ]b lb Ib lb Ib lb
Filln StrengthFalex Lb.,Non-Seizure Load 1750 2000 2000 2250 2250 2500 2500 2w
'1'iniken OK Load lbs. 70 70 70 70 70 70 70 70
hoam Test ASTM 892
j ltem lyTo, 7144 7146 7148 7150 7152 7154 7156 7158
age 2 of 2 01/93I With continuai resesroh aod developmztlt, Bel-IWy Company, Inc. roserves the righl to change infonnation conlei.ned
herein; th9 coniPanY is not respousihle for m snsa or misapPlicateon of its producLs.
SUL-20-94 TUE 11:57 BEL-RAY TRINIDAD LTD- 1 809 623 5729
Bel-Ray Cyompany, Inc, _.....__....^__._._._^P.O. 6o,t 526 • Farmingdale, Nenv Jersey t1T727 U.S,A.
7'FL (732) 938-2421 • FtV( (732) 938-4232ww•w.beh'ay.com
BEL-RAY" TENTERLUBE RL-3
tiei-ltay T'enterluhe RL-3 is one of a series of specially formulated lubricants fnr textile lenterframes and related applications.
Appticalions _ _-* 13earings, chains and conveyors in tenters, drying ovens and curing ovens
Fealtrres and Ben♦ Synthetic 1'ormula F.xtends beating, chain and convey<?r life.
♦ Excellent anti-wear andexuvme pressure properties
h Thermal stability
Minimi-r.es wear atnd recists shock loads.
Less carhon residue.
Bel-Ray Tcnter•lubc RLJ is the result ol'a developmenL in stabilir.ing heavy-duty lubricants foa-^ cperating tc,npcratures up to 246°C (47S"p). It is a conibination of synthetic ester Iluid ir itlr the
carefully chosen oxidation stabilicers and anti-wear abents. 1'he resuit is this remarkablelubricant for high temperatures.
ftrnong ihe properlies which contribute to its superior performance is its exceptional abil{ty topenetrate ittto the smallest crevices, assuring complete lubrication of all chain parl.e.Funherrttore. this exeeptional fluid is self-cieaning. Irthe chain becomes dry, ieaving n s+n,.,llamount of residae, when re-applying it acts as a solvent, dissolving its own residue. 'fo properlylubricate a chain, the lubrieant must penetrale to the bearing surfaces of the pin, bushins anttrollers. [ts ability to self-clean and penet-ate guarantees ehain protection.
Bel-Ray Tcntertube RL•3 wilt protect the chain from wear, assuring maxintuni ehain lifc, t'hi:,
lmti-wcar property, measured by the Falex F,P 1'est listed on page 2, is many tinies higher than
niost high ternperalure lubricants and even higher than most heavy-duty gear oils.
The oulstanding lubricity of Bel-Ray Tenterlnbe RL-3 wiil often substantially reduce the
frictionai f'orces on chains, resulting in ainarked reduction in amperage draw ofthe drvvingtnotor. lJsing an amnieter that wi11 activate the autontatic lubrica,tor is an excelient methoJ oi'eonserving lubricant and assuring properiy protected chains.
1'rorluct No. 6574
Page! af-° li40! 0?
I!'ith caurn,wl r'arcurv:Jr und rrCrv^^Opmenti Ur!-N^^' ('wnyrun. !x.'. r'rx•n•rs rlu• rrKh! lu <M+nge rFa uU,•rti+uti^ ^rr
^ rnnmiaeJ6erru. Ther'nmpanvnirnf.r.^pW,^rf'lefi^rrmsureurnisupyLCnlruauftlYproCum^
P-92
^
JUL-20-04 TUE 11:58 BEL-RRY TRIMIDRD LTD. 1 809 623 5729
BEL-RAY® TEN"t"ERLiJBE RL-3
TYPICAI. PROPERTIFS
Produet No.
Bcl-Ray Name Grade
ISO Viscosity Grade
Viscosity, ASTM D445^a 40'C, csrr0 100°C, cst
Viscosiiy, ASTM D"t 1617 100°F, SUS(1210°F, SIJS
Viscosity Index, ASTM D2270
Pou'r Paint, ASTM U97"C(°F)
Palex EP Test, ASTM D3233, Mcthnd ANoa-sciztlrc Load, lbf
Flash Point, ASTM D92yC
(°I')
Uscful Tenipcraturc RangcaC
(°F )
Specitic Gravity, AS'!'M 1)1298, 60/60°F
Colur
6574
R I.-3
150 2.70
17214.5
9 1377.R
79
.29(-20{
3000
282(540)
-23 to 246(-10to475)
G.964
Orange Rcd
rauc a r,r ? ns ri r n.:7rrlR uonlrnwl rweenk nnd dCWIp/utte+. lirl•Fuv (:um}mrrv. Ira. reerrres rhs righl la chawr /ke mJOrwuucn
Conlmnudlxrcw. "krCY+^jArv^'+.anwreqronslFltfUr^nnacecrw+sappiicrrnwinfrlap.r,dae+,.
^
P-03
I
i
1
^
• JUN-25-02 TUE 03:49 BEL-RFaY 'lRINILFiL LT â .
^miiJ„.y,
1 609 623 5729 F.05
G.h;ri' E.d..
13EI,-RAY CC)1"v11PANY, 1A;1 ^1"IIII^
^^
bj,bt+xt&mA'I'EdtMALk:NEQl EP G1tk^^ASE
GRA,L'►ES 0, 1, 2^."^ 3
Superlor General-Purpose Grea,se
IS TI'IIS JC1ST AN IDLI3 CI,AIM? - - - - - JUDGE F'OR YOURSLLF!
,̂
i
f.`
6̂
Ter4naleite EP Grease is:
Extreniel}, Water-Repellent
llseful 70 40b'f
IvYechanir,ally Stable
Easy To Pctnip At Lotiv 7eniperatures
Able To Carry Ileavy Loads
l:.rcellent In Accromatfc Dispetssing Equ.iFntent
Outstanding In Protection Offered To All 7^pes Of Bearfngs
Uesfgned For All Bearirzg Speeds But 79re Very Higlrest(Use Tertnalelae 8626 EP For High Speecl)
Att All Weather Grease llsefral From I (Yf To 4lXJ f
Q(j°'ered In Four (4) NLGI Grades; 0, 1, 2, & 3
L
^
As ycru can see, 'ICerrnalene P,P Greases have many of the propr,rties of tliespecialty greases. lt is entirely possible that only one grease can satisfy all of ,yourgrease reqttireflnents. L,et us exarnine each of the advantages in greater cletaii tocletearttine if the'I'ermalene lEl' Gt•ease will satisfy your needs,
k'age 1 of 4
^ ^;Ilr jjq^ ' 11111
Inc. P 0.9ox 526, Farmingdafe. NawJe^coy 0772^i, U.S.k, t^^^i ^^iP^ .a,r.
i eiepnoue 1"uw 7
'I'ER-MALI?,IVL* IaI' GGItEAS E
^ MU^''u" 'L^ G ^y^M.^,-..-.YVA` LIR.....^^^^J
^ I'erjnaler►e A±;,I' Greases are virtually waterproof. They repel water acting asexcellent scals for bea:rings exposed to the weather and wet conditioats. A goodr:neasure of this waterproof property is the standard Water Washout }3car.iztg Test,AS'I'M U-1264. When tested according to this method, Terntaleixe IsI'' Greaseshows approximately 0.04% loss. Wtiereas most greases will lose 5 to 20%.
0'°%I UR9off F'['erY'Bm aletae E)E' Greases are aluminurn complex base greases that have drolapinfypoi.rtt.s near or above 5001F. In applications of 400°F, if relubricated weekly, theyoffer trouble-free performance week after week; month after trouble-free montll.1^daturally, as temperatures drop, the relubrication schedule is extended. In. sonleapplications at 300°F, the relubrication cycle is ntonthly. In many plartts oroperations, 7Certnalene IEl' Grease is satisfactory for all grease applications.
^
^..^
`
^
.7.AQ;X_ ^7ABZ.EKZC11.4°i'he aluminucn cotnplex greases are extremely stable. As long as thc greascremains in the bearing, it stays the same as when it was placed in the bearinl,.'I'erm:4lene EP Grease does not soften and run out, regardless of tt ►e severity ofthe work irnposed upon it.
AMJ?F%S'I'era:naleme JE<:I' Greases pump witlt ease at 250F. The Grade "0" can be used inautoarsatic eqiaiprnent to teinperatures of 0°F.
AXJE_T9_CA.l(Y LIRAV^LD^S'I'he £;P in the name'1"ermalerte EI' Grease means Extretne Pressure. Iticleed thisgrease is r,apabie of enduring heavy loads and shock Ioad application. Its uscreduces wear, and break downs due to wear. Truly a heavy-duty, general-purposel;rease.
,&^ys^^r.r 'jN_^^^^MZW J?.tS.rrNStr r Y rM^'^.^VYl:ere t:iacbitxery is equi.pped with autornatic grease lubricating devices, thc l;reaseiased rnust not harden or ptug the lines. 'I'errnalene E)P' Greases Grade #1 and #0have been used witli outstanding success for this application. Moreover, they lhavebeer. testecl by many of the leading lubricating dispensing equipment manufacturersardd declared satisfactory for their erluipment. For details of those tests, see yoizr
I3el-Ray R.epresentative.
I'age 2 of 4
^
^
Ug
TEkZi1IA.LPNE EP GRE ASIti
^1.^`a^'^^A.e^V^^+ IN I°ROT2"CTIUN G►FFER^U 7}^ AT.I ;^°'^'A'^.___.^°al^'
'I'ertrialene EP Greases assure long-term protection for anti-friction bearirigs irrr, broad array of service applications. 1^roni niotor bearings to heavily loade+:lbearings experien.cing shock loads, they protect from wear. In corntnon atzd slec;vebearings, 7Cerrrtalerte EP Greases tenacious nature "hangs in" witla deterrnination.
A1flDF,Xk^IB FO R ALI. ^,NC,i SPFED513UT Tlrl^^.RY f;PI(^FI'JCerrnalene EP Greases are heavy-duty greases for all bearing speeds up to 3500to 4000 RF'M. In most plant operations this covers the entire range of applic.titionspeeds. In the event that higher speeds are encountered, we suggest the tiase of tltvTerrnalene 8026 FF Grease #2.
^
^
. M.,
,4A"-WL^A^17,^k'K GREA:frU E14U -10°F TO 4°ETerrrtratene L;k" txreases are plastic to -101F or lowcr. '1"he heavier l;rade purrtnsreadily to 251I^; the "0" grade to 0°1F. Full protection of all bearinl;s is assuredover this cntire broad temperature ratige. For lower temperatures, we suggest tlaense of Ternxalene $626 EP Grease #2.
COWA rCBL^.^C ^ ^_T^dE,dt_C^zBA SZyS l>;U7' I>*TNT(1N^There need be no concern of introducing Ternralene EI' Greases to bearings t11athad been previously iubricated with other greases. It is surprisingly conipatiblewith otber greases; usually improving the other grease in proportion to the quaatityof "1Certnalene r4, P Gresse added. Lentone greases are the solc exception to thegeneral rule of compatibility. When adding Termalene EP Grease to 13entonegrease,the bearing should be purged.
'I'errtralene EP Greases are truly superior general-purpose greases. liy upgradingthe quality of the general-purpose grease, one grease can usually be used for allof ttie plants' grease requirenxents. This usually results in econoinic benefits bylarger pua-cliase of the one product, reduced inventories, reduced wear and l:earingloss, and perhaps naost important, a reduced chance for e.rror by applying ttte
wrong grease in the bearing.
^ .1.T/Y^A.AAI'4T_AA^AL^I!/A V1WAl1lLI
TI'F'ICALP„I^QPF,RTIE,NIaC,'1 Grade Q 1 2 3
^ t'.onsistency, 11'enetratioai, ASTM ll 217^'i0 Strokes 368 319 287 245
^- 100,000 Strokes, Nax 380 340 300 765
Dropp'sng k'oint °F, Min, ASTM ll 2265 480 490 500 500
Snap °! 7 9 11 12.5'1°'ype Soap --- Aluminum Cocnplex--__.....__„__.
Free Fatty A..cid !, Max., ASTM D 128 Trace 'I`race 1'race '1'race
CJseful Teirsperattire Range °r 10 - 400 1- 400 10 - 400 10 - 400
1#ase OilViscosity, ASTM ll 2161SUS Q 1009P 900 900 900 SCO
Load Carrying Ability"1`itaikext EP OK. Load, ASTM D 2509
^ Ibs, Min. 50 50 50 50^ 4-Bal1 F?P, ASTM 7S 2596
Wr;ld Load, kg, Mirr. 400 400 400 400Load Wear Tndex 51.3 51.3 51.3 51.3
Ria.st Tcst5tatic. Bearing '1'est, ASTM D 1743
Rating
Ox.idation Stability, ASTM D 942lbs, 1'xeasure ]Drop @ 100 Iirs.
Water Was9iout Test, ASTM p 12640 100°Y', ^'Ia Loss
^
i
3
1 1 1
2 2 2
--- 0.08 0.04
Ciw..n^^Pnh-
0.03
\
^'
SU4-2-,-02 TUE 68:53 BEL-fcfi'Y TRINIDFiL LT â . 1 S©9 E.23 572.- P.01
TEttMALENE r P GRL:AS>F
l^^QULrA^,,t' ?l,YCr IN 1'IdloTEar'77(1N CaFI;Ri "D Tp ^S LG ^'T.g^. ledYllY(iS
1'erntalene EP Greases assure long-term protection for anti-friction bearings in^ a broad array of service applications. p'rom motor bearings to heavily loacied
bearings experiencitig shock loads, they protect frotn wear. In cotntnon and sleevebearings, Terntaiene PP Greases tenacious nature "hangs in" with deternziuation.
d)ESI(' ED Tit7R AM, d! f RU+'C CPEED^ BUT TI3'E'i'errttalene EP Greases are heavy-duty greases for all bearing speeds up to 3500to 4000 RPM. In ntost plant ope rations this covers the entire range of applicationspeeds. In the event that higher speeds are encountered, we suggest the use of theTermalene 8626 Bia Grease f12.
t1_^^,I f/SEFUI^^R^M-l0°F400°I%Terrztalene EI' Greases are plastic to -10117 or lower. The heavier grade punipsreatlily to 25"F; the "0" gracle to 0°F. Pull protection of all bearings is assuredover this entire broad tetnperatua'e range. Por lower temperatures, we suggest theuse of Termalene 8626 EP Grease V.
,162^'^4T7B^T E^WI1'll AI T_®^IIIs REASE^ B^T -;xf^^^'T here need be no concern of introducing Terntalette EP Greases to bearings that., .,.had been previously lubricated with other greases. lt is surprisingly compatible
`. .. _ ... ...,with other greases; usually itnproving the other grease in proportion to the quanlity
^- of 'Y"ertnalene EP Grease added. F3entone greases are the sole exception to t3iegeneral r-ule of compatibility. Wlten adding Termalene PP Gr°ease to Bcaitoncgrease, the bearing should be purge.d.
Ter[taalerte EP Greases are truly superior general-purpose greases. By upgradingthe quality of the general-purpose grease, one grease can usually be used for allof the plants' grease requirenients. This uaually results in economic benefits bylarger purchase of the one product, reduced inveatories, reduced wear and hearint;loss, and perhaps most important, a reduced chance for error by applyinp, the
wrong grease in the bearing.
^^ Page 3 of 4
TUN-25-U2 TUE bS:54 8EL-PA'Y TP.IIJI â AD LT â . 1 809 623 ._ i2. P.02
^
-- TEI{115A]OL, NE EP GREASEI
'TYmLgL3,I'ROPERT^J=S^ Nb.,G1 Grtsde
`^. Consistency, 1'enetration, ASTM D 21760 Strokes 368 319 287 245100,000 Strokes, Max 380 340 300 265
Dropping Point "P, Min, ASTM D 2265 480 490 500 500
Soap `;b 7 9 11 12.5I'ylre Soa1) _-----_AlunninumComplex---- ___^
I^ree Fatty Acid %, Max., ASTM D 128 Trace Trace Trace Trace
tJseful 1Cetnperat.ure Range °F 10 - 400 1- 400 10 - 400 10 - 400
131$Fr£ O11Viscosity, ASTM D 2161ST1S @ 100°F 900 900 900 900
Load Carrying Ability^ Tinilcen Fl' O1C l,oad, AS'I'M D 2509
Ibs, Min. 50 50 50 50^ 4-T3a11 I?P, ASTIVI D 2596
Weld I.oad, kg, Min. 400 400 400 400Load Wear Index 51.3 51.3 51.3 51.3
Rust 7'estStitic 13earing Test, ASTM D 1743R.ating 1 1 1 1
Oxidation, Stability, ASTM ll 942ibs, 1?ressuf•e Drop Q 100 Iirs. 3 2 2 2
Water Washout'rest, ASTM D 1264@ 100"k, % Loss - 0.08 0.04 0.03
^ ltti,versabality^ <'olor Red Red Red Cted
! yte,m No, 7240 7242 7244 7246^
^ Plago 4 of 4 01l9 s^'Nith co:atiaual research aud deve.fof inent, Bel-Ray comnany, Inc . YBServes tho right to change infomtation contai.ned here'un, tl:e
company is not responcible for mi,ltse or misapplicatioxt of its produol.s.
