PRODUCT CERTIFICATION ACCREDITATIONbsti.portal.gov.bd/sites/default/files/files/bsti.portal.gov.bd/page... · BDS EN 197-1:2003 . INFORMATION ON CERTIFICATION AGREEMENT AND REQUIREMENTS

PRODUCT CERTIFICATION ACCREDITATION BSTI operates third party Accredited Product Certification Scheme (PCS) following type 5

Scheme of ISO/IEC 17067:2013 (i.e. Application review, Evaluation of Inspection & Test

results and quality management system, Review, Granting and surveillance of Factory &

Market). It consists of determining conformity of a product with a Bangladesh Standard

(BDS) & regulatory requirements. The quality of certified product’s test result including

factory’s infrastructure & environment are monitored through surveillance (factory and

market).

Accredited Product Certification Scheme (consists eight mandatory and six voluntary

products mentioned in the Schedule of Product Certification) of BSTI has already been up

gradated in accordance with the international standard ISO/IEC 17065:2012 (Conformity

Assessment- Requirements for bodies certifying products, processes & services).

Accreditation has been received on 09 January 2012 from National Accreditation Body for

Certification Bodies (NABCB), India with a view of achieving the satisfaction of local

consumers as well as to promoting exports of our local products throughout the world.

Accreditation certificate of PCS Number is PRDT 002 is valid up to 8 January 2019.

To ensure the transparency & impartiality which is practicing in the process of the product

certification system, BSTI Council has formed an Impartial Committee named as

Certification Advisory Panel (CAP). The members of the Certification Advisory Panel are

given below-

1. Additional Secretary, Ministry of Industries Convener

2. Representative from Ministry of Industries Member

3. Representative from SME Foundation Member

4. Representative from Ministry of Health & Family

Welfare

Member

5. Representative from Ministry of Commerce Member

6. Representative from Federation of Bangladesh

Chamber of Commerce & Industry (FBCCI)

Member

7. Representative from Bangladesh University of

Engineering & Technology (BUET )

Member

8. Representative from Dhaka Chamber of

Commerce & Industry (DCCI)

Member

9. Representative from Consumer Association of

Bangladesh

Member

10. Director (CM) Non-voting Member Secretary

The functions and duties of the Certification Advisory Panel are as given below:

Review and assist BSTI to develop policy matters relating to impartiality of certification

activities.

Supervision of the implementation of product certification impartiality policy, impartiality risks and

mitigation procedure.

Suggest new areas for mandatory/voluntary certification for consideration of the Council and

review the certification schedule of mandatory/voluntary product under accredited or non-

accredited certification.

Advise BSTI Council on matters affecting confidence in certification, including openness and

public perception.

Review accreditation audit findings, certification & decision making process and make

suitable recommendations for improvement in certification operations.

Schedule of Product Certification

SI. No.

Certification Schedule

Category Sub Category Scope (Products/Process) Evaluation Criteria Technical Standards

Others

Applicable Document

1 Type-5 Based on ISO/IEC

17067:2003

A Food Manufacturing

A-I

Processing of Perishable animal Products

1. Pasteurized milk 2.Flavored Milk 3. Low Fat Milk

1.BDS 1702:2002 2.BDS 1471:2012 3. BDS 1866:2013

STI for each product (based on Standards)

A-II

Processing of Perishable Plant Products

1.Fruit drinks 2.Chutney

1.BDS 1581:2015 2.BDS 521:2011

A-III Processing of ambient Stable Products

1. Wafer Biscuit 2.Intermediat Protein Biscuit 3.Edible Jell 4.Fotified Soya bean Oil 5.Fortified Palm Olein 6. Fortified Edible Palm Oil 7. Fortified Edible Rice Bran Oil 8. Sweetened Condensed Filled Milk

1. BDS 1001:2010 2.BDS 1563:2011 3.BDS1801:2015 4. BDS 1769:2014 5.BDS 1774:2014 6. BDS 1770:2014 7. BDS 1886:2014 8.BDS 1780:2014

B Non-Food Manufacturing

B-I Construction Materials and Building

1.Cement 1. BDS EN 197-1:2003

INFORMATION ON CERTIFICATION AGREEMENT AND REQUIREMENTS

A. Information on Certification Agreement

The Bangladesh Standards and testing Institution, hereinafter referred to as the certification body and represented in this matter hereby makes agreement for the certification of the products under the scope/ non-scope operating with the requirements of ISO/IEC 17065. In order to hold and use of the licence, the licensee shall comply with the conditions of the agreement as follows: Article 1: Regulations for certification and inspection The stipulations of the General Rules for the certification system apply to this agreement specified as a terms & conditions of license for Product Certification Scheme. 1.1The license holder shall make all necessary arrangements for the BSTI to check, inspect, investigation of complaints, to verify for compliance of all the license conditions given herein and in the STI and the participation of observers (if applicable). 1.2 When a part of the manufacturing/producing/processing/treating of product/commodity is subcontracted by the license holder, he shall be responsible to arrange with the subcontractor for the BSTI to check, inspect investigation of complaints, to verify for compliance of all the appropriate conditions given herein and in the STI and the participation of observers (if applicable). 1.3 A license may be suspended if the licensee has failed to provide reasonable facilities for inspection or testing and has contravened any provision of either the Ordinance, Regulations. 1.4 If the manufacture of a product has ceased continuously for a period of six months, the BSTI shall be notified and the mark shall be suspended. The manufacturing operation shall be reassessed by the BSTI before approval is granted to reuse the mark. 1.5 A license shall be revoked if more than two suspensions for the same or similar deficiencies occur within a period of two years. 1.6 Application of renew will be made by the client three month before the expiry of the license otherwise it will be automatically dreamed as cancelled. Article 2: Rights and obligation 2.1 The holder of the license agrees that the certified products manufactured and supplied by him as specified in the license attached to this agreement complies with the requirements stated in the BDS and Scheme of Testing & Inspection and other provisions of the Products Certification Scheme as published in the BSTI regulations 1989.

Accordingly, the Bangladesh Standards and Testing Institution (BSTI) authorizes the holder of the license to use the BSTI certification mark on the products to which the license applies and to announce publicly that certification has been received. 2.2 The holder of the license of the product agrees that the persons representing BSTI will have unobstructed access without prior notification to the premises of the factory covered by the license during the normal working hours of the factory involved, including equipment, personnel, storage areas and the premises of any subcontractors of the holder of the license whose operations are covered within scope of the license.


2.3 The holder of the license agrees that the products for which the license is granted will be produced to the same specifications as the sample that has been submitted to BSTI (as specified in the application form for product certification).

2.4 The holder of the license agrees to apply the mark on the product labels that has been registered with the BSTI as per the instructions on the Use of the Logo as given in the Article 10.

2.5 The holder of the license agrees to implement changes communicated by BSTI in relation to the Certification scheme policy and procedures, BDS, STI within the specified time frame.

2.6 When requested by other parties the license holder shall provide the BSTI license in full without any changes.

Article 3: Responsibilities of BSTI 3.1 BSTI ensure that all information and changes relevant to the Certification scheme policy

and procedures, BDS, STI, fee structure shall be provided in a timely manner to the holder of a license.

3.2 BSTI shall provide on request relevant information relating to scope of Certification and Validity of license in response to any query from any party.

3.3 If any STI is revised the revised STI is sent to the licensee. The surveillance schedule of

that company may be changed to assess the compliance of the revised STI. Article 4: Surveillance 4.1 BSTI carries out continuing surveillance on the holder of the certification to determine compliance with his obligations, in accordance with the conditions stated in the Bangladesh standards, Scheme of Testing & Inspection and General Conditions of License for Product Certification Scheme.

4.2 The surveillance is carried out by the staff of BSTI. The cost of the samples and cost of

testing of the samples shall be borne by the licensee on submission of invoices/bill and test reports by the BSTI.

4.3 Surveillance of products on the requirements of the relevant standard as given in the STI shall be undertaken by BSTI.

4.4 The testing of the samples taken from factory or market is carried out minimum twice a year or as required by sample failures or consumer complaints. The licensee shall be informed of the results of the surveillance.

Article 5: Complaints The holder of the licensee agrees to upon request by BSTI to keep records of all complaints received and action taken relative to the products and report to BSTI of any complaints regarding those aspects of the products covered by the license.

Article 6: Publicity 6.1 The holder of the license has the right to publish that he has been authorized to mark the products to which the license applies.


6.2 The holder of the license shall make claims of Certification only for the products, Process and Services which are covered within the scope of the license and shall not make any misleading claims or convey the impression that other types or grades of the products, Process and Services are covered under Certification. 6.3 Among other methods the BSTI gives publicity to the certification given to the licensee in news papers, radio and television etc. and cancellation of the agreement, as appropriate.

Article 7: Confidentiality The BSTI is committed for ensuring maintenance of confidentiality by its employees concerning all proprietary information of the holder of the license, with which they become acquainted during performance of various certification activities, or received from any other sources. However BSTI shall submit any confidential information of the holder of the license if required by any legal authority, under intimation to the holder of the license. Article 8: Payment The holder of the licence agrees to pay for all expenses in relation to the surveillance, including test, inspection and administration costs. Article 9: Agreement period 9.1 This agreement shall continue in force unless and until withdrawn for justified reasons or

cancelled by either party upon due notice given to the other party. 9.2The validity of the license is for a three year period, and can be extended provided all the

conditions are satisfied. 9.3 When the holder of the license ceases his operation, he shall notify BSTI in writing within

thirty days from the date of cessation thereof. Article 10: The Use of BSTI Product Certification Marks Logo

10.1The certification marks logo issued by BSTI shall be used only by a client that has received a product in conjunction with a valid certification licence from BSTI. 10.2The logo should be applied together with number of the Standard and brand name or trade mark mentioned in the license. 10.3 The product certification logo should be applied on the product itself, product label, container or primary product packaging. 10.4The product certification logo can be used with the accreditation mark of the BSTI Product certification scheme. The accreditation mark must only be used in conjunction with the BSTI product certification logo. 10.5The product certification logo should not be used on products not included in the scope of certification or in any misleading manner. 10.6The mark not to be used in connection with non certified products including the use in (a)Advertisements or promotional brochure (b)Client’s stationary


(c)Business cards (d)Client’s Website 10.7 The product certification logo should not be applied to laboratory test, calibration or inspection reports, 10.8The logo master can be obtained from BSTI Certification Marks Wing office. 10.9Electronic reproduction of the logo master is permitted. 10.10Redrawn approximations of the logo are not allowed. 10.11 Licensee to immediately discontinue the use of the mark in event that the certification is suspended or revoked. Article 11: Suspension/Withdrawal/Cancellation of the license 11.1 BSTI shall suspend or withdraw/cancel the license in case it is satisfied that the product under certification does not conform to the relevant BDS, or the license holder has violated any of terms and conditions of the certification scheme. Depending on the reason for the withdrawal/cancellation the following schedule of notice will be followed by BSTI:

Situation requiring the dispatch of notice that can lead to suspension/withdrawal/ cancellation

Days of notice prior to suspension

Days of notice prior to withdrawal/cancellation of license/cancellation of certification decision

a) Non-conformance with the standards that is considered hazardous to public health and life

immediate 30 days period prior to 6 months of suspension

b) Failure to meet other non-conformance with the standards

≤ 45 days 30 days period prior to 6 months of suspension

c) Non-payment of fees according to article 8 - 20 days period prior to the date of expiry or 60 days from the date of certification decision

d) Not providing facilities for inspection, or failed to comply with any other conditions of the license or does not take action.

≤30 days 15 days period prior to 3 months of suspension

e) Failure to meet other provisions of the agreement or/and commitment or failed to comply with any conditions of the license

≤30 days 30 days period prior to 6 months of suspension

f) Non-compliance with new requirements in relation to revision of standards or STI or any technical document of BSTI

as specified by BSTI or ≤120 days

15 days period prior to 2 months of suspension.

g) Non-compliance with new requirements of any law

- ≤60 days period prior to the date of cancellation decision

h) Involving marking of variety which is not covered in the license

- 15 days period prior to the date of cancellation decision

11.2 Advice of cancellation shall be sent by registered letter (or equivalent means) to the

other party, stating the reasons and the date of Termination of the agreement. 11.3 Upon receipted of Intimation of cancelations/withdrawals of license, the erstwhile holder of the license shall stop the use of BSTI marks and any other claims of Certification with immediate effect and destroy all stationary, labels, dies etc which has being use for marking the products and confirmed the same in writing to BSTI within 15 days of receipted of intimation.


11.4 Similar action shall be followed when the holder of the license voluntarily surrenders the license or allows the license to expire. The original license shall be return to BSTI. Article 12: Information on modifications 12.1 The holder of the license agrees to inform the BSTI of any intended modification in the product, Brand, the manufacturing processes, management and technical personnel, manufacturing locations, plant, machineries, quality assurance system or the quality control setup and ownership of the company which may affect the compliance of the product. In such cases the licensee shall not release marked products resulting from such changes until the BSTI has notified the licensee accordingly. 12.2 If the requirements applying to the products covered by this agreement are modified, BSTI shall immediately inform the holder of the licence by registered letter (or equivalent means), stating at what date the modified requirements will become effective, and advising him of any need for a supplementary examination of the products which are subject to this agreement. 12.3 Within a specified period of time after receipt of the advice described in paragraph.11.1, the holder of the licence shall inform BSTI by registered letter (or equivalent means) whether he is prepared to accept the modifications. If the holder of the licence gives confirmation within the specified period of his acceptance of the modification and provided the result of any supplementary examination is favorable, a supplementary licence will be issued or other modifications of the BSTI's records. 12.4 If the holder of the licence advises the BSTI that he is not prepared to accept the modification within the time specified in accordance with 11.2 or if he allows the terms for acceptance to lapse, or if the result of any supplementary examination is not favorable, the licence covering the particular product shall cease to be valid on the date on which the modified specifications become effective, unless otherwise decided by the BSTI. Article 13: Liability BSTI is an autonomous body under the ministry of industries government of the People’s Republic of Bangladesh. Clients under the product certification activities of BSTI are bound to take the whole liabilities for any kind of inconvenience by the legal requirements of Bangladesh. Article 14: Appeals All disputes that may arise in connection with this agreement are to be settled in accordance with the appeal procedures of the BSTI. In case the matter cannot be resolved, both parties are entitled to seek legal recourse through competent courts. Issued in duplicate and signed by an authorized representative of the Bangladesh Standards and Testing Institution and the applicant.


Information on documents, which is required to attachment with the Application of CM License.

1. Trade license (in favour of Factory premises) 2. Premises license (Sanitary license)/ Environment Clearance Certificate (where

necessary) 3. TIN Certificate 4. Trade mark Registration 5. Registration from BOI/BSCIC (if any) 6. Calibration Certificate of measuring equipments 7. Factory layout 8. Process flow chart 9. List of manufacturing machineries 10. List of testing equipments 11. Quality Control Plan/Scheme 12. Product Label/ Packet 13. Initial Questionnaire

INITIAL QUESTIONNAIRE

[This questionnaire should be filled in and returned together with the application form. It is intended to provide preliminary information on the manufacturing procedures, quality assurance system and record keeping. This document will be used by the assessment staff during preliminary visits to the factory or factories involved as a part of the initial assessment. Supplements may be included where it is necessary to expand any statements. A separate document should be completed for each factory, or variations between factories clearly indicated. The statements should relate to the facilities available as the date of completion of this form. The information given in this document will be treated in the strictest confidence. Information on the following subjects will furthermore facilitate the treatment of the application.]

Please give the following information on basic system

Section 1–Name and contact address of the Manufacture:

1.1 Product name:

1.1.1 The production is organized as-

i) Batch production

ii) Continuous production

iii) Other………………………………

1.1.2 How are the products identified

1.1.3 How does the system allow for products to be isolated in case of a quality problem

1.1.4 Please give any other relevant information on the production system

1.2 Process:

Please detail various steps in the manufacture- a production schedule and/or supplement in chart form showing stages may be advantageous.

1.3 Manpower:

Manpower in general shift: (a) Operational: (b) Non operational:

Number of manpower per shift: (a) (b) (c)

Section 2– Quality control system:

2.1 Have you established quality control system based on?

(a) Relevant Bangladesh standard (BDS)/International standard: Yes/ No

(b) Any other quality control system standard( HACCP/ GMP-GHP/ ISO 22000/ ISO 9001/ISO 14001):

2.2 Quality assurance:

Please give following information on factory QC staff organization

2.2.1 Head of Quality assurance:

2.2.2 Reporting to?

2.2.3 Is there a separate QC/Inspection Dept?

2.2.4 If so indicate

2.2.4.1 Chief Inspector if different from 2.2.1

2.2.4.2 Are staffs aware of the tests in the relevant standards?

2.2.5 Are Quality Audit checks carried out and by whom?

2.2.6 Please give any other information on QC staff organization.

2.2.7 Has the product been tested to the relevant standard? (If so please attach report):

2.3 Test equipment/instruments, gauges and tools Please detail test equipment used, manufacturer’s names, and indicate calibration procedure

(if calibrated by external agency, please give name and address) and if calibration

certificates are available.

Section 3 – Records and documentation

3.1 General

3.1.1 Please indicate form of master specification, i.e. drawing, product/parts schedule, reference sample, etc. Also indicate other general records available.

3.1.2 Please indicate system used to amend design/specification

3.2 Compliance- Specification

3.2.1 Please indicate level of defectives found in past six month. If tests in accordance with the relevant standard (s) have already been carried out, attach copies of summary of test results if available.

3.2.2 Please indicate the level of claims/complaints made under warranty and/or otherwise and give also as a percentage of total output.

3.2.3 Have independent tests been made on products against the standard? By whom? Please attach copies if available.

3.2.4 Please give information relating to the-

a) Rejections of the batches not conform to the standard:

b) Application rejection date and cause

c) License cancellation date and cause

d) How many times your application/license was rejected?

3.2.5 Please give information details of warning/advice received from BSTI

due to illegal activities.

I/We have read the terms and conditions and hereby undertake to abide by them as

mentioned in the document of Information on Certification Agreement and Requirements (Doc. no. R/A-08/IC)

Name and address of the representative of the organization with seal

[Form-1 of Regulation Section- 9(1)]

Application of License for using Standards Marks To The Director General Bangladesh Standards & Testing Institution 116/KA, Tejgaon Industrial Area Dhaka-1208. 1. I/We, (Name of the person or the organization in full) ----------------------------------------------- have been engaged in the business in the address and I/We, are applying for issuance of a license for use of “Standard Mark” keeping in conformity of the commodities/ processes of Bangladesh Standard according to Bangladesh Standards & `Testing Institution Ordinance, 1985 (Ordinance xxxvii of 1985) as described below:

a) * Commodity The related Bangladesh Standard Kind Number (Numbers)- Size Grade b) * Class or commodities License Number & duration Kind (where applicable):- Size Grade c) * Process 2Name and address of the factory if is different from para 1:

3 According to my/ our best knowledge the quantity of the mentioned commodity/ process and quantity of export and its price is given bellow:

Year Production Unit Value a) For the last year ------------------------- to---------------------

b) For the Current year ------------------------- to---------------------

Year Export Unit Value a) For the last year -------------------------to--------------------- b) For the Current year ------------------------- to---------------------

In an application only one item may be applied for included in (a), (b) and (c) The other two is to be struck out.

4. With a view to ensure the similarity of the process of production of the mentioned commodities as per related standard of Bangladesh Standard (Standards)-

I/ We, am/ are using the schedule of Inspection & Testing as per description attached with the application/ proposing to use the same. The regular records or all such similar records of inspection kept/ will be kept in the supplied form in detail.

I/ We, are promising to partly change, amend or change my/ our inspection and testing program as may be required form time to time to keep in line with our policy which may be directed by you.

5. If the institution desires to make a preliminary inspection or investigation then I/We, we agree to give all our reasonable opportunity and privileges to the institute according to our ability and I/We, also we agree to make payment of all the charges including charges of the above inspection or all the expenses incurred in the investigation or the time and way in which the Institute will decide.

6. If the license is given, I/We am/ are promising to abide by all the terms and conditions of the license so long it remains valid for use and also promising to comply with the rules and regulations as mentioned in the above ordinance. If the license becomes prolonged or it is cancelled, then I/We, are giving this promise that any use of the trade mark on any commodity under the license will be stopped immediately and all related advertisement, materials will be taken back and other necessary action will be taken to follow the rules and regulations of the above ordinance.

Date :

Signature :

Name :

Father’s Name :

Designation :

Village :

P.S. :

District :

Phone (if any) : On behalf of ……………………………

(Name of the representative of the organization)

FLOW CHART FOR PROCESS OF GRANTING OF CERTIFICATION

Preliminary inspection

Evaluation Report findings

Formal Inspection (Assess quality control system and take

samples and test)

Evaluation

Second formal inspection within six months

Final Review & Decision by Certification Committee

Payment of fees by applicants

Signing of Licensing Agreement and Issue License to the applicant

Publication in BSTI website

Surveillance sampling and testing twice in a year

Application Review

APPLICATION (Prescribed Form, Additional documents,

Initial questionnaire & Licensing Agreement)

Yes

No

OKyes

Not OK

Not OK

OK

Resullts

Resullts

Pre -Review

OK

To be Inform applicant for re- proceses

Approved

Inspection/Testing result evaluation

Review

License Renewal/ License continue

OKyes

Not OK

Action to be taken as per

Licensing agreement

Not

Impartiality Policy of

Product Certification Scheme

The Management of BSTI is committed to render its services in full compliance of ISO/IEC 17065:2012 & quality manual and to make continuous efforts for the improvement of its certification schemes in the best possible way to obtain maximum confidence and satisfaction of consumers, licensees and all other stakeholders. They will act to continuously enhance satisfaction of its customers from industry, services and other organizations who utilize BSTI services. The decisions of BSTI are based on objective evidences of conformity or non-conformity in its conformity assessment activities. BSTI is committed to support its staff engaged in conformity assessment activities against any internal and external pressures that may be seen as restricting in fair discharge of their duties. All Conformity assessment services are discharged by avoiding conflict of interest and maintaining independence at the policy, organization and operating levels. It is the stated policy of product certification scheme of BSTI that conformity assessment personnel shall discharge their functions in a risk free and transparent environment without fear of any retribution from senior management for all actions taken in good faith and diligence. The BSTI is committed to identify and comply with all legal, regulatory and other requirements, particularly in respect of product certification activities. This policy is implemented by

Developing, installing, maintaining and updating systems and mechanisms to identify and control impartiality, conflicts of interest and independence issues for each conformity assessment system at all levels.

Training all personnel engaged in certification / testing services on this policy and its implementation.

Implementing mitigation measures in the organization and operating levels across the BSTI Wings and offices that include a combination of prohibitions, restrictions, process checks and self-declarations.

Setting up independent certification committee and Certification Advisory Panel (CAP) to review the impartiality related risks and mitigating actions and for advising BSTI on additional and emerging risks and other mitigating actions.

PROCEDURE OF EVALUATION

I. Inspection of premises is done in 2 stages-preliminary inspection (PI) and formal inspection

(FI).

II. If all the documents submitted with the application are satisfactory then preliminary

inspection of the manufacturing premises will be carried out by Registered Inspecting Officer.

III. Before preliminary inspection man days will be calculated for initial product certification

inspection according to the procedure of Man Days calculation by a competent Inspecting

Officer.

IV. BSTI has system for preparation of inspection plan for the evaluation of the factory and

inspection plan is communicated to the unit in advance. This document gives details of

factory evaluation process for the benefit of applicants.

FEE STRUCTURE

All certification marks fees shall have to pay according to the BSTI S.R.O No. 230/law/2009 section

(3) and the following fees structure of Application (new/renewal), Marking fee and License fee of

Product Certification Scheme (PCS) has prescribed by the BSTI Regulation’1989 section 9(6), 9 (KA)

and the BSTI Ordinance’1985, section 20(3).

The certification fees consist of (15% VAT will be added):

Application fee: Tk. 1000 for new and Tk. 500 for renewal.

Marking fee: 0.07 percent of ex-factory turns over for fruit processing organizations and 0.1 percent

of ex-factory turn over for other products.

License fee: 200 taka per year.

PROCEDURE FOR SURVEILLANCE

1 Purpose

The purpose of this procedure is to define the planning and conduct of surveillance of certification licensees of the product certification scheme to assure continuing compliance to the conditions of the license.

2 Scope

This procedure applies to all licenses granted under the product certification scheme (PCS). It is applicable to all staff of the certification wing and also to any external subcontractors appointed to under take surveillance inspections. The full scope of the processes covered is as per flow charts given Figure 1 and Figure 2.

3 Definitions 3.1 Directory of License -The permanent record maintained by the certification marks

wing containing names of current certification licensees with approval date, status/expiry date, issue date, standard number and factory address (format is P-SU-02-F01).

3.2 Register of Inspectors- A list of names of persons qualified to perform factory

inspections indicating the fields of expertise according to the industry sector. 3.3 Inspecting officer- A person listed on the Register of Inspectors who is assigned to

perform a surveillance inspection of a licensee. 3.4 Surveillance Report- A standard form as contained in P-SU-02-F03 3.5 Certification Report- A evaluation report is prepared and presented for approval of

certification containing the product description, inspection report, test result and recommendation is reviewed for approval by the certification committee.

4 Procedure 4.1 The criteria and basis for review of report and subsequent decisions stated to be

covered vide procedure for Renewal, Suspension, Cancellation, Reduction in scope and Withdrawal of the Licence. Which calls for straight away suspension of licence in the event of any non- compliances observed.

Compliances to the STI requirements of the certification scheme are to be evidenced in the surveillance reports (PM-SU-02-F03). 4.2 Supervision controls over licensee’s performance After the grant of license, the licensee is authorized to mark the products covered by the license subject to the condition that the Licensing Agreement and Scheme of Testing & Inspection (STI) for the Product Certification Scheme are fully implemented.


a. Post certification controls are exercised through surveillance inspections at the licensee’s unit periodically. During these inspections, thorough technical auditing of the quality control system is carried out with reference to the Licensing Agreement and STI for Product Certification Scheme. Samples of current production taken from the factory and the market are tested, in BSTI or independent laboratories.

b. The results of inspections and product testing are communicated to the licensee as appropriate with suitable advices.

c. A license can be suspended or cancelled following serious discrepancies, particularly if the product does not conform to the applicable Bangladesh Standards or International Standards.

d. The licensed product has ceased continuously for a period of six months, the production operation shall be re-inspection by the BSTI before approval is granted to reuse the mark.

4.3 Surveillance Planning

Action Responsibility 4.3.1 Directory of License

All new approvals of certification shall be immediately upon approval entered into the Register of Certifications. (P-SU-02-F01) Similarly the register shall be updated for withdrawals, non-renewals and any other changes. 4.3.2 Establishment of schedule of surveillance (Factory

& Market)

A schedule for surveillance (P-SU-02-F02) shall be established on twice in a year bases. This schedule shall include both factory and market surveillance.

In establishing the schedule, it should be assumed that each license is subject to one factory surveillance and one market surveillance per year. The man day requirements of factory inspections shall be calculated in accordance with the man days calculation procedure. For market surveillances depending on the location of the surveillance, man days/ inspection time shall be allocated by Deputy Director in respective file and one inspecting officer could be collect one more sample available in the same market/shop for different licensee’s product.

The person assigned for the surveillance should be selected on the basis of having the required expertise in the field as per Register of Inspecting officers.

The Inspecting officers assigned shall keep the list confidential and not inform the licensee or any other person who does not need such information.

Quality Manager

Deputy Director


4.3.3 Surveillance Preparation The Inspecting officer (Field officer) shall prepare for the inspection at least one day prior to the inspection. He should review and familiarise himself with the license file, the standard, and the General and Specific Conditions annexed to the Certification agreement. He should take particular note of the findings of the previous surveillances and outstanding non conformances, the process flow and the routine testing requirements. Prior to travel to the factory or market he should ensure that he has the blank copies of the Surveillance Report, the reference standard, copy of the previous surveillance report and the certification report. 4.3.4 Factory Surveillance i) Upon arrival at the factory the Inspecting officer (Field officer) should identify himself with the authority card and announce to the management his intention to conduct the surveillance in accordance with the Certification agreement. In case the management refuses to permit him to conduct the surveillance he should note this in his report, explain the consequences and give a copy of the report to the licensee, inform his Deputy Director and depart. The Deputy Director shall send a formal notice to the licensee stating that a recommendation to suspend his license will be made in accordance to the clause 11.1(d) of Licensing Agreement if he fails to provide an acceptable reason within the time for his refusal to permit the surveillance.

Inspecting officer

Inspecting officer

Deputy Director

ii) The Inspecting officer (Field officer) should have a brief discussion with the named person responsible for quality as documented in the certification report to establish the plan for the surveillance. iii) The Inspecting officer (Field officer) shall proceed to perform the inspection and report findings as per the surveillance report. In performing the inspection, he should request that a representative of the licensee accompany him. He should ensure that all elements are inspected and all columns of the report are filled.

Inspecting officer

Inspecting officer


iv) He should select samples for witness testing and for testing in BSTI or other labs as indicated in the specific conditions annexed to the certification agreement. Samples should be selected from the finished goods store or production line on a random basis. These should be identified by clear marking and particulars recorded so as to ensure that these are not substituted. v) Upon completion of the inspection and compiling the report, the Inspecting officer (Field officer) shall thank the licensee and present a signed copy to the licensee’s representative. The original report shall be retained in the file and submitted to the Deputy Director for review.

Inspecting officer

Inspecting officer

4.3.5 Market Surveillance i)The surveillance is undertaken at identified market places (retailers or wholesalers) on a scheduled date (or period) as given in the Surveillance Schedule

ii) Upon arrival at the premises of the seller the Inspecting officer (Field officer) should identify himself with the authority card and announce his intention to take samples of the identified products. iii) A survey of the stocks available at the sellers premises should be undertaken to identify the BSTI certified products that are available at the premises.

Inspecting officer

iv) Prior to sampling it should be ascertained whether sufficient stocks are available to sample in accordance with the sampling plan given in the STI applicable to the product. If sufficient stocks are not available another sales premises within the same area, where the required number of specimens can be taken should be selected (or take a reduced sample).

Inspecting officer

v) The number of specimens as required by the STI should be taken from the stocks at random and secured within a suitable container. The container should be marked with details of sampling. i. e. date of sampling, name and address of the seller, number of specimens, name and designation of the Inspecting officer (Field officer) and any other relevant details. The container should be sealed in the presence of the seller and the inspector.

Inspecting officer


vi) The cost of the items in the sample should be reimbursed to the seller and a receipt for the sale obtained. The receipt should be counter signed by the inspector and attached to the surveillance inspection report.(P-SU-02-F03) vii) The cost of the items in the sample shall be recovered from the respective licence holder in accordance with the Terms and conditions of license and article 4 of the licensing agreement. viii) The Deputy Director shall make surprise factory surveillance by a senior inspecting officer or by a technical evaluator when no products found in the market of a licensee and it will be consider against scheduled market surveillance.

Inspecting officer

Deputy Director

4.4 Follow –up on Surveillance

A. The Deputy Director shall review the surveillance report. The recommendations made with regard to renewal, suspension and withdrawal shall be acted upon as per Procedure for Renewal, suspension, Cancelation or withdrawal P-RSC-02, Renewal, suspension.

B. If certain changes or revision in the BDS standard, then changes the surveillance schedule and anticipated the follow up surveillance shall conduct to verification of changes and modifying.

Deputy Director

5 Related documents and records List of the Certified Client: Q/F09/LC Directory of License, P-SU-02-F01 Surveillance Schedule, P-SU-02-F02 Surveillance report, P-SU-02-F03


FIGURE1- FLOW CHART FOR FACTORY SURVEILLANCE Ok

Not Ok

Establish Schedule for Surveillance

Inspect plant*, Select samples Witness tests

Inspecting officer (Field Officer) reviews corrective action and submits recommendation

Licensee reviews report for action as required

Issue surveillance

report

Evaluation of surveillance and test reports

Review & Decision by Certification Committee

Continue Licence

Laboratory test selected samples

Lab issues test report

Samples

Pre-review & Recommendation

by Deputy Director


FIGURE 2-FLOW CHART FOR MARKET SURVEILLANCE Ok Not Ok

Visit markets and take samples

Inspecting Officer (Field Officer) reviews corrective action and submits recommendation

Licensee reviews report for action as required

Issue surveillance report including lab test results

Evaluation of surveillance and test reports

Final review & Decision by Certification Committee

Continue Licence

Test the samples at approved laboratory

Lab issues test report

Pre-review & recommendation

by Deputy Director

Establish Schedule for Surveillance

Impartiality Policy of

Product Certification Scheme

The Management of BSTI is committed to render its services in full compliance of ISO/IEC 17065:2012 & quality manual and to make continuous efforts for the improvement of its certification schemes in the best possible way to obtain maximum confidence and satisfaction of consumers, licensees and all other stakeholders. They will act to continuously enhance satisfaction of its customers from industry, services and other organizations who utilize BSTI services. The decisions of BSTI are based on objective evidences of conformity or non-conformity in its conformity assessment activities. BSTI is committed to support its staff engaged in conformity assessment activities against any internal and external pressures that may be seen as restricting in fair discharge of their duties. All Conformity assessment services are discharged by avoiding conflict of interest and maintaining independence at the policy, organization and operating levels. It is the stated policy of product certification scheme of BSTI that conformity assessment personnel shall discharge their functions in a risk free and transparent environment without fear of any retribution from senior management for all actions taken in good faith and diligence. The BSTI is committed to identify and comply with all legal, regulatory and other requirements, particularly in respect of product certification activities. This policy is implemented by

Developing, installing, maintaining and updating systems and mechanisms to identify and control impartiality, conflicts of interest and independence issues for each conformity assessment system at all levels.

Training all personnel engaged in certification / testing services on this policy and its implementation.

Implementing mitigation measures in the organization and operating levels across the BSTI Wings and offices that include a combination of prohibitions, restrictions, process checks and self-declarations.

Setting up independent certification committee and Certification Advisory Panel (CAP) to review the impartiality related risks and mitigating actions and for advising BSTI on additional and emerging risks and other mitigating actions.

BANGLADESH STANDARDS AND TESTING INSTITUTION

PRODUCT CERTIFICATION SCHEME Revision No. 01 PROCEDURE FOR RENEWAL, SUSPENSION,

CANCELLATION, REDUCTION IN SCOPE AND WITHDRAWAL OF THE LICENSE

Doc. No. P-RSC-02

ISSUE NO.:02 ISSUE DATE: 01.10.2014 REVISION DATE: 23.12.2014 Approved By: D(CM)

Issued by: Quality Manager Page 1 of 7

1 Purpose The purpose of this procedure is to define the criteria for renewal, suspension, cancellation, reduction in scope and withdrawal of the licenses under the product certification scheme. 2 Scope

This procedure applies to all licenses granted under the product certification scheme. 3 Definitions 3.1 Register of Inspecting officers A list of names of persons qualified to perform factory inspections indicating the fields of expertise according to the industry sector. 3.2 Certification Report A evaluation report is prepared and presented for approval of certification containing the product description, inspection report, test result and recommendation is reviewed for approval by the certification committee 4 Conditions for Renewal, Suspension, Cancellation, reduction in scope,

withdrawal of the license 4.1 Granting of renewal and scope extension of licence 4.1.1 Validity of a license: The initial validity of the license is for a period of three years

from the date of certification decision and a licence will be issued with mentioning issue date after payment against bill/invoice issued by BSTI.

4.1.2 Renewal license: It can be renewed by extended on application for further periods of

three years at a time depending on last surveillance inspection and sample’s test results.

4.1.3 An application for renewal of the license should be made before three months of its

expiry. BSTI shall notify the client or show cause one month prior to the expiry date of license. After expiry it to be treated as cancelled.

4.1.4 (a) An expired license or /and a license has expired before certification decision shall

not be renewed. The license shall be deemed to have been cancelled after its expiry date if the application is not made for renewal before the expiry. (b) If the application is made for renewal before the expiry and BSTI has not found satisfactory evaluation results of last surveillance or not meet the requirements of last findings/NCs or application is made few days prior to the expiry & no sufficient time for completion the sample test or inspection evaluation then license will not be




Doc. No. P-RSC-02



continued and treated as cancelled and application may be consider as a new. An additional application fee will be charged in this case.

4.1.5 If all the conditions as given in the general conditions, the agreement are satisfied

and the assessment and last surveillance inspection reports including the test results are satisfactory the license shall be renewed for a period of three years and for scope extension certification shall be granted for the period of existing period/ rest period of the license issued earlier against that product by certification committee.

4.1.6 If the validity of a license be expired before the meeting of certification committee and client has applied for renewal and last surveillance inspection reports including the test results are satisfactory in this case license shall be renewed from the expiry date for next three years by Director General of BSTI and it will be reviewed in the next certification meeting.

4.2 Suspension of licence 4.2.1 A license may be suspended if it has been established that

a) If the company’s facilities and/or surveillance results are found to be unsatisfactory and/or the test results indicate that the licensed product does not conform to the requirements of the Bangladesh Standard specified in the licence;

b) the licensee has failed to conduct regular inspection or testing of the licensed product;

c) the licensee has failed to follow the requirements of the Scheme of Testing & Inspection applicable to the licensed product;

d) the licensee has used the mark in respect of a commodity or process which does not comply with the specified standard relating thereto;

e) the licensee has failed to provide reasonable facilities for inspection or testing;

f) the licensee has failed to comply with any terms and conditions of the license;

g) The licensee has failed to take suitable improvement actions within 30 days, after BSTI has served show cause notice following failure of product is observed during surveillance operations

h) The licensee has failed to take suitable improvement actions within 30 days,

after BSTI has served show cause notice following failure in respect of deficiencies observed in licensee’s quality control system, or non-adherence to the provisions of STI, during factory surveillance operations

i) In case, a repeat failure is observed in respect of a requirement for which the

licensee has already taken corrective action, BSTI shall suspend the licence without any show cause notice.

j) The licensee has used the BSTI certification mark in contravention of the rules

for use of the logo in respect of a type or grade, or brand which is not covered in the license, as observed during factory or market surveillance operations. BSTI reserves the right to issue suspension directly or issue a show cause notice depending on the facts of the case.




Doc. No. P-RSC-02



k) The licensee has failed to submit proper justification within 7 days, after BSTI

has served show cause notice following a factory surveillance inspection where the licensee has failed to provide reasonable facilities for completing the factory surveillance.

l) The licensee has failed to comply with any other conditions of the license, or

provisions of the prevailing BSTI Ordinance/Act/Regulations, within 30 days of show cause notice period;

4.2.2 A license shall be suspended also if :

a) the licensee has contravened any provision of either the BSTI Ordinance or the Regulations.

b) the manufacture of the licensed product has ceased continuously for a period of six

months. 4.3 Removal of Suspension 1. In cases of product non-conformance, suspension shall be removed after BSTI has

agreed to the proposed corrective actions, verified the same during factory surveillance, and the product sample is found conforming to BDS during repeat testing in BSTI laboratory.

2. In cases of other deficiencies observed during factory surveillance, suspension shall be removed after BSTI has agreed to the proposed corrective actions, and verified the same during factory surveillance..

3. In cases involving marking of variety which is not covered in the licence, decision for revocation will be taken after BSTI is satisfied that the violation was due to bonafide reasons or genuine error, based on the submission of details by the licensee. Where the violation is determined to be willful, the procedure for cancellation of licence, prosecution shall be initiated.

4. In cases involving not providing facilities for inspection, or failed to comply with any other conditions of the license, decision for revocation will be taken after BSTI is satisfied that it was due to bonafide reasons based on the submission of details by the licensee. Where the reasons are determined to be willful, the procedure for cancellation of licence shall be initiated.

4.4 Cancellation of licence

4.4.1 A licence shall be cancelled for the following reasons:

a) After a suspension, if the licensee has not rectified the problems indentified in the letter of suspension within six months of the date of suspension of the licence.

b) If more than two suspensions for the same or similar deficiencies occur within a period of two years,




Doc. No. P-RSC-02



c) If the payments due to BSTI have not been satisfactorily completed within the time period allowed (defined in the licensing agreement).

d) In cases involving product non-conformance or deficiencies observed during surveillance, if the licensee does not take action to rectify the deficiencies that led to the suspension, the license shall be cancelled after a period of six months from the date of suspension. A show cause notice for a period of 30 days shall be issued to the licensee before deciding on the cancellation of licence.

e) In cases involving marking of variety which is not covered in the licence, which is determined to be willful, the licence shall be cancelled without any further notice to the licensee, in case the notice for suspension was given earlier. In case notice was not served before suspension, a show cause notice for a period of 15 days shall be issued to the licensee before deciding on the cancellation of licence.

f) In cases involving not providing facilities for inspection, or failed to comply with any other conditions of the license, if the licensee does not take action to rectify the deficiencies that led to the suspension, the license shall be cancelled after a period of 3 month from the date of suspension.

g) BSTI reserves the right to cancel a licence in case a certified product is found to be failing in a critical requirement affecting public health and safety without invoking the show cause/suspension process.

4.5 Informing the licensee 4.5.1 Prior to cancellation/ suspension of license ‘show cause’ notices would be issued to

the licensee. 4.5.2 When a license would be suspended or withdrawn/cancelled, the BSTI shall forthwith

inform the licensee in writing.

4.5.3 The cancellation matter to be inform the regulatory section of BSTI to take legal action actions if using logo without valid license or misuse the mark or unsafe product marketed that has notified earlier.

4.5.4 An inspection would be carried out to verify whether the product is available in the market/factory or not before recommendation of cancellation the license.

4.6 Reduction in Scope of licence




Doc. No. P-RSC-02



4.6.1 BSTI reserves the right to reduce the scope of the licence, in case it is found that specific varieties of the product covered under the licence are not conforming to the BDS and the reasons for the non-conformance do not affect the conformance of the other varieties.

4.6.2 On request by the licensee. 4.6.3 When certain varieties are removed from the scope of the BDS following revisions or

amendments. 4.7 Withdrawal of Licence 4.7.1 On request by the licensee.

4.7.2 When a requirements standard such as BDS, is withdrawn by the Standards body, or reduced in scope, or merged with other standards and BSTI CM (Wing) takes a policy decision to withdraw licenses having such varieties in the scope.

4.8 Procedure for Suspension, Cancellation, Reduction and Withdrawal 4.8.1 Suspension:

1. BSTI shall send the show cause notice prior to the suspension in the certification committee after reviewing the non fulfillments any requirements of the PCS to the licensee by email, followed by hard copy by post. The licensee shall be required to confirm acknowledgement as well as compliance by email to BSTI immediately on receipt. In the critical issues Director (CM), BSTI could be suspended license and it will be reviewed in the committee.

2. The licensee shall immediately discontinue the use of the certification mark and shall

retain all the marked material in the stock. The status of the stock shall be informed to BSTI.

3. The licensee shall propose the corrective actions he proposes to take. BSTI shall

evaluate the proposed corrective actions and either conveys its agreement or observations in case further or revised corrective actions are expected.

4. The licensee shall inform BSTI once the corrective action has been taken and where

required the improved material is ready for inspection within the suspension period.

5. BSTI shall arrange a surveillance visit at the licensees factory for the verification of corrective actions and taking samples of products where required.

6. The decision for removal of suspension will be taken by the certification committee

after the corrective action report is found to be satisfactory and the sample report from the BSTI lab is found to be conforming.

7. In case the corrective action is deemed to be not satisfactory or the product sample

is found to be not conforming, the licensee shall be given one more opportunity for




Doc. No. P-RSC-02



improvement and resubmission of sample within the specified time frame of six months.

8. In case the actions are completed within six months, the procedure for cancellation

shall be invoked. 4.8.2 Cancellation: A license shall be cancelled by the Director General of BSTI in critical issues and reviewed it in the next certification committee for the following reasons:

1. In situations that require serving a notice before cancellation, BSTI send the show cause notice to the licensee by email, followed by hard copy by post. The licensee shall be required to confirm acknowledgement by email to BSTI immediately on receipt.

2. BSTI shall provide an opportunity to the licensee an opportunity to present his case

in writing or in person. In case of personal submission, the record note of discussions will be prepared and signed by licensee and BSTI official.

3. Before proposing for cancellation, the case shall be reviewed by authorized official

and submitted to the Certification Committee with his recommendations and reasons for proposing cancellation

4. The decision to cancel the licence or provide further opportunity to the licensee shall

be the sole discretion of the Certification committee. However the reasons for disagreeing with the recommendations shall be recorded, when applicable.

5. The decision of the Certification committee shall be communicated to the licensee by

email followed by hard copy by post. The licensee shall be required to confirm acknowledgement by email to BSTI immediately on receipt.

6. The cancellation letter shall specifically advise the licensee to:

(a) take immediate steps to have the mark removed or erased from all stocks of marked production lying in his premises or warehouses (b) take action to discontinue all advertising relating to the certification, (c) return the original license to the BSTI.

7. The cancellation letter shall inform the licensee the right to appeal against the

decision of BSTI to cancel the licence.

8. BSTI reserves the right to organize a visit to the erstwhile licensee’s premises and / or warehouses to confirm the actions taken in accordance with 4.8.2 item 7 above.




Doc. No. P-RSC-02



4.8.3 Withdrawal:

1. Whenever a decision is taken to withdraw certification licenses due to withdrawal or revision of standards, BSTI shall decide a common date from which the licenses shall stand withdrawn, which will take into account, the commercial interests of the license holders in consuming the existing stocks. Wherever necessary, the reasons for withdrawal will be widely publicized to the public.

2. When the withdrawal is sought by the licensee, if the request is made at the time of

end of validity, the license will be allowed to expire in the normal way. If the request is received within the validity period, the case shall be put up the Certification Committee together with the request letter. The decision of the Committee shall be communicated to the licensee by email followed by hard copy by post. The licensee shall be required to confirm acknowledgement by email to BSTI immediately on receipt.

3. After withdrawal, the licensee shall be required to take action as per 4.8.2 item 7

above.

5 Related documents

a) Records of Suspend License, P-RSC-02-F01 b) Records of Cancel License, P-RSC-02-F02

PROCEDURE FOR COMPLAINTS, APPEAL AND DISPUTES

1 Purpose The purpose of this procedure is to provide a framework for identifying the status of

complaints, appeals and disputes received from clients and how to deal with them.

2 Scope This procedure is applicable for dealing with complaints, appeals and disputes related to

Product Certification Activities carried out by BSTI.

3 Definitions

3.1 Concerned Party: A complainant, appellant or a person reporting a dispute.

3.2 Complaint: A written expression of dissatisfaction against BSTI or a product certification licensee

3.3 Appeal: A further course of action available in respect of a complain.

3.4 Dispute: A disagreement between: a) BSTI and licensee b) BSTI and product user

4 Responsibility

a) Director (CM) b) Deputy Director c) Quality Manager

5 Procedure

5.1 General 5.1.1 Complaints, disputes and appeals on licensed products, licensees, BSTI’s

subcontractors and other activities under product certification scheme shall be entertained by BSTI.

5.1.2 A complaint, dispute or appeal is received by the Director General or Director (CM). 5.1.3 An appeal on a decision made by the BSTI shall be submitted to the BSTI within six

months of the date of the decision. 5.1.4 An acknowledgement of the receipt of the complaint. dispute or appeal shall be sent

by the Director (CM) within seven days of receipt of the complaint , dispute or appeal to the party concerned.

5.1.5 Complaints, disputes or appeals should be made in writing or using the complaint,

disputes or appeals record form (P-CAD-02-F01) available from BSTI. 5.1.6 The complaint, dispute or appeal is sent to the Quality Manager for recording and

further action. 5.1.7 In the event that the complaints ,disputes and appeals form has not been filled by the

relevant party, the Quality Manager shall fill all relevant details pertaining to the complaint, dispute or appeal in the record form (PM-CAD-02-F01).


5.1.8 The Quality Manager shall investigate the complaint, dispute or appeal with the assistance of the relevant BSTI officers and other staff.

5.1.9 Personnel of BSTI including those acting in a managerial capacity shall not be

employed to investigate a complaint, dispute or appeal if they have or had within the last two years (from the date of the complaint, dispute or appeal) any relationships that may compromise the impartiality of the investigation.

5.2 Complaints and disputes 5.2.1 Upon receipt of a complaint and/or dispute the BSTI shall at a minimum:

a) Initiate its complaints and/or disputes procedure.

b) Determine the acceptability of the complaint and/or dispute based on

evidence received.

c) If the complaint or dispute is accepted by BSTI, it shall conduct an

investigation as detailed in 6.2.2 through 6.2.4 below.

d) If the complaint or dispute is not accepted, BSTI shall notify the

complainant of the reasons for not accepting the complaint or dispute and

provide instructions on BSTI appeals process. The complainant shall also

be given the opportunity to provide additional evidence to support the

complaint or dispute.

5.2.2 Complaints or disputes shall be reviewed by designated BSTI staff for relevance to provisions of BSTI procedures and for inclusion of documented evidence of non-compliance.

5.2.3 An investigation shall be undertaken and may be aided through the undertaking of an unannounced audit and interviews with outside stakeholders, such as producers, consumers, and the complainant, at a minimum. The investigation shall cover all elements identified in the complaint or dispute.

5.2.4 The BSTI shall submit a report to the complainant or the party reporting a dispute on the conclusion of its investigation. The report shall present the conclusions of the BSTI investigation and the reasons for that conclusion, summarizing the documented evidence submitted unless the concerned party has requested that they be held confidential in whole or in part.

5.2.5 If BSTI management has agreed for corrective action, that commitment shall be

included in the report. When BSTI's implementation of the corrective action has been confirmed, that too shall be reported.

5.2.6 After investigation the Quality Manager shall report to the relevant Deputy Director on

the validity of the complaint and/or dispute and any corrective action required. 5.2.7 If no corrective action is required the Quality Manager shall complete the Complaint,

Disputes and Appeal record form (P-CAD-02-F01) and forward it to the relevant Deputy Director, who shall communicate with the concerned party.

5.2.8 If corrective action is required the Quality Manager shall communicate the same to

the relevant Deputy Director who shall request the related persons to proceed with


the corrective action. Outcome of the corrective action is recorded on P-CAD-02-F01 form and submitted to the relevant Deputy Director and Director(CM).

5.2.9 The Deputy Director shall communicate with the concerned party outlining the

decision of the BSTI and the corrective action taken, if applicable. 5.2.10 If the concerned party is not satisfied with the actions / decisions taken by the BSTI,

and on a written communication received from the concerned party, the complaint and/or the dispute and the report of the investigation shall be submitted to the Certification Advisory Panel.

5.3 Appeals

5.3.1 The Certification Advisory Panel shall appoint an Appeals Panel for consideration of the Appeal.

5.3.2 The Appeals Panel shall hold an enquiry where relevant BSTI officials and the

Appellant are present. 5.3.3 The decision of the Appeals Panel shall be final and shall be communicated to the

Appellant by the Director (CM) 5.3.4 The records of Complaints, Appeals and Dispute shall be maintained by the quality manager. 6 Related Documents Records of Complaints, Appeals and Dispute: P-CAD-02-F01

N.O. Name of the Producer Distrtict Division Product Name Brand Standard Number

License No. Issue Date Validity

1 Seven Circle (Bangladesh) Ltd. Gazipur Dhaka Portland Cement (CEM-I) Seven Rings Gold BDS EN 197-1 3712 Jun/18 30/Jun/212 Premier Cement Mills Ltd Munshigonj Dhaka Portland Cement (CEM-I) PREMIER BDS EN 197-1 5572 Jul/18 30/Jun/213 BRAC Dairy & Food Project Gazipur Dhaka Pasteurized Milk Aarong Dairy BDS 1702 5805 Oct/16 30/Jun/194 PRAN DAIRY LTD. Norshingdi Dhaka Pasteurized Milk PRAN MILK BDS 1702 6068 Jul/17 30/Jun/205 Seven Circle (Bangladesh) Ltd. Gazipur Dhaka Portland Composite Cement

(CEM-II/B-M)Seven Rings BDS EN 197-1 7176 Aug/16 30/Jun/19

6 Premier Cement Mills Ltd Munshigonj Dhaka Portland Composite Cement (CEM-II/A-M)

PREMIER BDS EN 197-1 7184 Aug/16 30/Jun/19

7 Premier Cement Mills Ltd Munshigonj Dhaka Portland Composite Cement (CEM-II/B-M)

PREMIER BDS EN 197-1 7764 Aug/16 30/Jun/19

8 M I Cement Factory Ltd. Munshigonj Dhaka Portland Composite Cement (CEM-II/A-M)

Crown BDS EN 197-1 8252 Aug/17 30/Jun/20

9 Emirate Cement Bangladesh Ltd. Munshigonj Dhaka Portland Composite Cement (CEM-II/B-M)

Ultratech BDS EN 197-1 8626 Jul/18 30/Jun/21

10 HEIDELBERGCEMENT BANGLADESH LTD.

Narayangonj Dhaka Portland Composite Cement (CEM-II/B-M)

RUBY, SCAN BDS EN 197-1 8627 Nov/16 30/Jun/19

11 Anwar Cement Ltd. Munshigon Dhaka Portland Composite Cement (CEM-II/A-M)

ANWAR, SHOKTIMAN

BDS EN 197-1 9216 Aug/16 30/Jun/19

12 Anwar Cement Ltd. Munshigon Dhaka Portland Cement (CEM-I) ANWAR BDS EN 197-1 9217 Aug/16 30/Jun/1913 Metrocem Cement Ltd. Munshigonj Dhaka Portland Composite Cement

(CEM-II/B-M)Metrocem BDS EN 197-1 10567 Aug/18 30/Jun/21

14 Dubai Bangladesh Cement Mills Ltd. Bagerhat Khulna Portland Composite Cement (CEM-II/B-M)

Five Rings BDS EN 197-1 10822 Sep/18 30/Jun/21

15 Shah Cement Industries Ltd. Munshigonj Dhaka Portland Composite Cement (CEM-II/B-M)

Shah Special, Shah Popular

BDS EN 197-1 11027 May/16 30/Jun/19

16 Lafarge Surma Cement Ltd. Sunamgonj Sylhet Portland Limestone Cement (CEM-II/B-L)

SUPERCRETE, SUPERCRETE

Plus

BDS EN 197-1 11472 Sep/16 30/Jun/19

17 Seven Circle (Bangladesh) Ltd. Gazipur Dhaka Portland Composite Cement (CEM-II/A-M)

Seven Rings Special

BDS EN 197-1 11486 Aug/16 30/Jun/19

18 CONFIDENCE CEMENT LTD. Chattagram Chattagram Portland Composite Cement (CEM-II/B-M)

CONFIDENCE BDS EN 197-1 13918 Sep/16 30/Jun/19

19 Holcim Cement Bangladesh Ltd. Bagerhat Khulna Portland Composite Cement (CEM-II/B-M)

Holcim BDS EN 197-1 15112 Oct/17 30/Jun/19

20 Baro Awlia Dairy Milk & Foods Ltd. Narayangonj Dhaka Pasteurized Milk Dairy Fresh BDS 1702 15186 Sep/16 30/Jun/19

21 Holcim Cement (Bangladesh) Ltd. (Plant-1)


Holcim Strong Structure

BDS EN 197-1 15202 Oct/16 30/Jun/19

22 Holcim Cement Bangladesh Ltd. Bagerhat Khulna Portland Cement (CEM-I) Holcim BDS EN 197-1 15393 May/17 30/Jun/19


Narayangonj Dhaka Portland Cement (CEM-I) SCAN BDS EN 197-1 15436 Nov/16 30/Jun/19

24 ROYAL CEMENT LIMITED Chattagram Chattagram Portland Cement (CEM-I) ENGINEER BDS EN 197-1 15618 Oct/16 30/6/201925 M I Cement Factory Ltd. Munshigonj Dhaka Portland Cement (CEM-I) Crown BDS EN 197-1 16133 Feb/18 25/Jan/2126 Aman Cement Mills Ltd. Sirajgonj Rajshahi Portland Composite Cement

(CEM-II/B-M)Aman Cem BDS EN 197-1 16564 Aug/15 19/Jun/21

27 Madina Cement Ind. Ltd. Narayangonj Dhaka Portland Composite Cement (CEM-II/A-M)

Tiger Extreme, Buffalo Head, Three Rings

BDS EN 197-1 17152 Mar/16 28/Feb/19

28 Unique Cement Industries Ltd. Narayangonj Dhaka Portland Composite Cement (CEM-II/A-M)

FRESH SPECIAL BDS EN 197-1 17206 May/16 30/Apr/19

29 Metrocem Cement Ltd. Munshigonj Dhaka Portland Cement (CEM-I) Metrocem BDS EN 197-1 17396 Dec/18 30/Nov/2130 Bashundhara Industrial Complex Ltd. Narayangonj Dhaka Portland Composite Cement

(CEM-II/B-M)Bashundhara,

KINGBDS EN 197-1 17782 Jan/17 31/Oct/19

31 Bashundhara Industrial Complex Ltd. Narayangonj Dhaka Portland Cement (CEM-I) Bashundhara BDS EN 197-1 17783 Jan/17 31/Oct/19



Holcim Strong Structure

BDS EN 197-1 18043 Apr/17 30/Apr/20

33 Noapara Cement Mills Ltd. Jessore Khulna Portland Composite Cement (CEM-II/A-M)

Himaloy Special BDS EN 197-1 18046 Apr/17 30/Apr/20

34 Dubai Bangladesh Cement Mills Ltd. Bagerhat Khulna Portland Cement (CEM-I) Five Rings BDS EN 197-1 18047 Apr/17 30/Apr/20

35 Shun Shing Cement Mills Ltd. Khulna Khulna Portland Composite Cement (CEM-II/B-M)

Seven Rings BDS EN 197-1 18106 Aug/17 30/Jun/20

36 Shun Shing Cement Mills Ltd. Khulna Khulna Portland Cement (CEM-I) Seven Rings Gold BDS EN 197-1 18107 Aug/17 30/Jun/2037 Akij Cement Company Ltd. Narayangonj Dhaka Portland Composite Cement

(CEM-II/B-M)Akij BDS EN 197-1 18111 Apr/17 30/Apr/20

38 Akij Cement Company Ltd. Narayangonj Dhaka Portland Cement (CEM-I) Akij BDS EN 197-1 18112 Apr/17 30/Apr/20

Directory of License



39 Aramit Cement Ltd. Chattagram Chattagram Portland Composite Cement (CEM-II/B-M)

CAMEL BDS EN 197-1 18214 Apr/17 30/Apr/20

40 AKIJ FOOD & BEVERAGE LTD. Dhaka Dhaka Pasteurized Milk FARM FRESH MILK

BDS 1702 18262 Mar/18 30/Sep/20


Chattagram Chittagong Portland Composite Cement (CEM-II/B-M)

SCAN, RUBY BDS EN 197-1 18401 Nov/17 30/Sep/20


Chattagram Chattagram Portland Cement (CEM-I) SCAN, RUBY BDS EN 197-1 18402 Nov/17 30/Sep/20

43 ROYAL CEMENT LIMITED Chattagram Chattagram Portland Composite Cement (CEM-II/B-M)

ENGINEER BDS EN 197-1 18445 Feb/18 07/Jan/21

44 Shun Shing Edible Oil Ltd. Bagerhat Khulna Fortified Soyabean Oil VEOLA BDS1769:2014 18357 19/Mar/18 07/Jan/2145 S. ALAM CEMENT LIMITED Chattagram Chittagong Portland Composite Cement

(CEM-II/B-M)Minar BDS EN 197-1 18445 Feb/18 26/Dec/20

46 AL HAJ MOSTAFA HAKIM CEMENT INDUSTRIES LTD.

Chattagram Chattagram Portland Composite Cement (CEM-II/B-M)

TAJMAHAL BDS EN 197-1 18564 Jan/18 30/Sep/20

47 Bangladesh Milk Producers' Co-operative Union Limited

Dhaka Dhaka Pasteurized Milk milk vita BDS 1702 18566 Feb/17 30/Sep/20

48 Mir Cement Ltd. Narayangonj Dhaka Portland Cement (CEM-I) Mir Cement BDS EN 197-1 18588 Mat/2018 15/Apr/2149 Mir Cement Ltd. Narayangonj Dhaka Portland Composite Cement

(CEM-II/A-M)Mir Advance BDS EN 197-1 18589 Mat/2018 15/Apr/21

50 American Dairy Limited Gazipur Dhaka Pasteurized Milk MOO BDS 1702 18731 Aug/18 21/Jun/2151 Eastern Cement Industries Limited Narayangonj Dhaka Portland Cement (CEM-I) Seven Horse,

Eastern CementBDS EN 197-1 18745 Aug/18 15/Apr/21

52 Aman Cement Mills Ltd. Sirajgonj Rajshahi Portland Cement (CEM-I) Aman Cem BDS EN 197-1 18808 Nov/18 19/Jun/2153 Olympic Cement Industries Limited Barisal Barisal Portland Composite Cement

(CEM-II/A-M)Anchor Up BDS EN 197-1 18939 Aug/17 30/Apr/20

54 Mongla Cement Factory Bagerhat Khulna Portland Composite Cement (CEM-II/B-M)

ELEPHANT, Sena Cement

BDS EN 197-1 19019 Dec/18 23/Aug/21

55 Madina Cement Ind. Ltd. Narayangonj Dhaka Portland Composite Cement (CEM-II/B-M)

TIGER BDS EN 197-1 19020 Nov/18 23/Aug/21

56 Madina Cement Ind. Ltd. Narayangonj Dhaka Portland Cement (CEM-I) TIGER BDS EN 197-1 19021 Nov/18 23/Aug/21

57 Emirate Cement Bangladesh Ltd. Munshigonj Dhaka Portland Cement (CEM-I) Ultratech BDS EN 197-1 19069 Dec/18 17/Oct/2158 A R Cement Mills Limited Jessore Khulna Portland Composite Cement

(CEM-II/B-M)A R BDS EN 197-1 19086 Nov/15 17/Oct/18

59 Mongla Cement Factory Bagerhat Khulna Portland Cement (CEM-I) Elephant BDS EN 197-1 19087 Nov/18 17/Oct/21

60 Ehsan Cement Mills Limited Pabna Rajshahi Portland Composite Cement (CEM-II/B-M)

A.R BDS EN 197-1 19121 Dec/18 17/Oct/21

61 Igloo Dairy Limited Dhaka Dhaka Pasteurized Milk IGLOO BDS 1702 19400 Sep/16 27/Jan/19

62 Heidelberg Cement Bangladesh Ltd. Chattagram Chattagram Blast Furnace Cement (CEM-III/A)

RUBY BDS EN 197-1 19548 Feb/16 03/Jul/19

63 Tanveer Oils Ltd. Narayangonj Dhaka Fortified Soyabean Oil Super Fresh, No 1 BDS1769:2014 19198 27/Dec/15 16/Dec/18

64 Tanveer Oils Ltd. Narayangonj Dhaka Fortified Palm Olein Super Pure, Oleo BDS 1774:2014 19199 27/Dec/15 16/Dec/1865 Deepa Food Products Limited Narayangonj Dhaka Fortified Soyabean Oil Teer BDS1769:2014 19318 11/Feb/16 27/Jan/1966 LafargeHolcim Cement Ltd. Narayangonj Dhaka Portland Slag Cement (CEM-

II/B-S)Supercrete, Powercrete, Megacem

BDS EN 197-1 19668 Jul/16 24/Apr/19

67 Shabnam Vegetable Oil Industries Limited

Narayangonj Dhaka Fortified Edible Palm Oil Hilsa BDS 1774:2014 19356 18/Feb/16 27/Jan/19

68 LafargeHolcim Cement Ltd. Narayangonj Dhaka Portland Limestone Cement (CEM-II/B-L)

Supercrete BDS EN 197-1 19669 Jul/16 24/Apr/19

69 Bashundhara Industrial Complex Ltd. Bagerhat Khulna Portland Composite Cement (CEM-II/B-M)

Bashundhara BDS EN 197-1 19670 Jul/16 27/Jan/19

70 VOTT Oil Refineries Limited Chattogram Chattogram Fortified Soyabean Oil Teer BDS1769:2014 19403 14/Mar/16 27/Jan/1971 Khadiza Food Products Narayangonj Dhaka Fortified Soyabean Oil City, Cityzen BDS1769:2014 19419 15/Mar/16 07/Mar/1972 Marrine Vegetable Oils Limited Chattogram Chattogram Fortified Soyabean Oil ACI Pure,Noorjahan BDS1769:2014 19624 25/May/16 24/Apr/1973 Bay-Fishing Corporation Limited Chattogram Chattogram Fortified Soyabean Oil Pusti BDS1769:2014 19625 25/May/16 24/Apr/1974 Olympic Cement Industries Limited Barisal Barisal Portland Composite Cement

(CEM-II/B-M)Anchor, Olympus BDS EN 197-1 19898 Aug/16 24/Apr/19

75 J B Food Services Chattogram Chattogram Fortified Soyabean Oil Keya BDS1769:2014 19627 31/May/16 24/Apr/1976 Olympic Cement Industries Limited Barisal Barisal Portland Cement (CEM-I) Anchor, Olympus BDS EN 197-1 19897 Aug/16 24/Apr/1977 Bashundhara Industrial Complex Ltd. Bagerhat Khulna Portland Cement (CEM-I) Bashundhara BDS EN 197-1 19899 Aug/16 24/Apr/19

78 Bashundhara Industrial Complex Ltd. Bagerhat Khulna Portland Composite Cement (CEM-II/A-M)

Bashundhara BDS EN 197-1 19900 Aug/16 24/Apr/19

79 Eastern Cement Industries Limited Narayangonj Dhaka Portland Composite Cement (CEM-II/B-M)

Seven Horse, Seven Horse

Supreme

BDS EN 197-1 19901 Aug/16 24/Apr/19

80 Mostafa Food Products Narayangonj Dhaka Fortified Soyabean Oil Apple, Sugandha, Golap Ful

BDS1769:2014 19727 28/Jun/16 21/Jun/19

81 Shakti Edible Products Limited Narayangonj Dhaka Fortified Soyabean Oil Shakti BDS1769:2014 19821 31/Jul/16 21/Jun/1982 Jibon Food Products Narayangonj Dhaka Fortified Soyabean Oil JIBON, TAYEF BDS1769:2014 19832 01/Aug/16 21/Jun/1983 Emirate Cement Bangladesh Ltd. Munshigonj Dhaka Portland Composite Cement

(CEM-II/A-M)Ultratech BDS EN 197-1 19946 Sep/16 21/Jun/19



84 Confidence Edible Oil Limited Chattogram Chattogram Fortified Soyabean Oil Confidence BDS1769:2014 19895 16/Aug/16 21/Jun/1985 BENGAL TIGER CEMENT

INDUSTRIES LTD. Norshingdi Dhaka Portland Composite Cement

(CEM-II/B-M)TAIHEIYO BDS EN 197-1 19947 Sep/16 21/Jun/19

86 Dubai Bangladesh Cement Mills Ltd. Bagerhat Khulna Portland Composite Cement (CEM-II/A-M)

Five Rings BDS EN 197-1 19948 May/16 21/Jun/19

87 J S Marketing Chattogram Chattogram Fortified Soyabean Oil Minar BDS1769:2014 19902 06/Sep/16 21/Jun/1988 M I Cement Factory Ltd. Munshigonj Dhaka Blast Furnace Cement (CEM-

III/A)Crown BDS EN 197-1 20115 Nov/16 17/Oct/19

89 Khan Food & Agrobase Industries Limited

Dhaka Dhaka Fortified Soyabean Oil Mon, Mother, Pogo BDS1769:2014 19945 18/Sep/16 21/Jun/19

90 Deshbandhu Cement Mills Ltd. Sirajgonj Rajshahi Portland Composite Cement (CEM-II/B-M)

DESHBANDHU BDS EN 197-1 20131 May/16 27/Aug/19

91 Abir Consumar Food Products Cumilla Chattogram Fortified Soyabean Oil Teacher BDS1769:2014 19949 18/Sep/16 27/Aug/1992 ROYAL CEMENT LIMITED Chattagram Chattagram Blast Furnace Cement (CEM-

III/A)ENGINEER BDS EN 197-1 20144 Aug/16 17/Oct/19

93 DIAMOND CEMENT LTD. Chattagram Chattagram Portland Slag Cement (CEM-II/B-S)

DIAMOND Costal + BDS EN 197-1 20152 Dec/16 17/Oct/19

94 Daudia Oil Mill Feni Chattogram Fortified Soyabean Oil Chan Marka, Double Chan

Marka

BDS1769:2014 19960 07/Sep/16 27/Aug/19

95 Bashundhara Industrial Complex Ltd. Bagerhat Khulna Blast Furnace Cement (CEM-III/A)

Bashundhara BDS EN 197-1 20296 Feb/17 21/Dec/19

96 Premier Cement Mills Limited Dhaka Dhaka Portland Cement (CEM-I) Premier BDS EN 197-1 20297 Feb/17 21/Dec/1997 Life Food & Consumer Company Norshingdi Dhaka Fortified Soyabean Oil Life BDS1769:2014 19969 26/Sep/16 27/Aug/1998 Premier Cement Mills Limited Dhaka Dhaka Portland Composite Cement

(CEM-II/B-M)Premier BDS EN 197-1 20298 Feb/17 21/Dec/19

99 M. M. Vegetable Oil Products Limited Chattogram Chattogram Fortified Soyabean Oil Mostafa BDS1769:2014 20087 15/Nov/16 27/Aug/19

100 Siam City Cement (Bangladesh) Ltd. Narayangonj Dhaka Portland Cement (CEM-I) INSEE BDS EN 197-1 20341 Mar/17 21/Dec/19

101 M. K. S. Food Products Narayangonj Dhaka Fortified Soyabean Oil BIKASH, EDIVOLE BDS1769:2014 20102 23/Nov/16 27/Aug/19102 Siam City Cement (Bangladesh) Ltd. Narayangonj Dhaka Portland Composite Cement

(CEM-II/B-M)INSEE BDS EN 197-1 20342 Mar/17 21/Dec/19

103 Padma Consumar & Beverage Co. Narayangonj Dhaka Fortified Soyabean Oil Super padma, Tebro, Nodi

BDS1769:2014 20103 23/Nov/16 17/Oct/19

104 Aman Cement Mills Ltd. Sirajgonj Rajshahi Portland Composite Cement (CEM-II/A-M)

AmanCem BDS EN 197-1 20343 Mar/17 21/Dec/19


Narayangonj Dhaka Fortified Soyabean Oil Pusti, Ranna BDS1769:2014 20207 16/Jan/17 21/Dec/19

106 Seven Circle (Bangladesh) Limited Gazipur Dhaka Blast Furnace Cement (CEM-III/A)

Seven Rings Classic

BDS EN 197-1 20460 Nov/17 03/Dec/20

107 Aman Cement Mills Unit-2 Ltd. Narayangonj Dhaka Blast Furnace Cement (CEM-III/A)

Amancem CLASSIC BDS EN 197-1 20490 May/17 17/May/20

108 MRT Agro Products BD Mymensingh Dhaka Fortified Soyabean Oil Krishani BDS1769:2014 20208 16/Jan/17 21/Dec/19109 Aman Cement Mills Unit-2 Ltd. Narayangonj Dhaka Portland Slag Cement (CEM-

II/B-S)Amancem GREEN BDS EN 197-1 20641 Nov/17 17/May/20

110 Bangladesh Edible Oil Ltd. Dhaka Dhaka Fortified Soyabean Oil Rupchanda BDS1769:2014 20306 21/Mar/17 21/Dec/19111 NGS CEMENT INDUSTRIES

LIMITEDChattagram Chattagram Portland Cement (CEM-I) NGS BDS EN 197-1 20643 Aug/17 16/Jul/20

112 Aman Cement Mills Unit-2 Ltd. Narayangonj Dhaka Portland Cement (CEM-I) Amancem BASIC BDS EN 197-1 20644 Nov/17 17/May/20113 Aman Cement Mills Unit-2 Ltd. Narayangonj Dhaka Portland Composite Cement

(CEM-II/B-M)Amancem ADVANCE BDS EN 197-1 20645 Nov/17 17/May/20

114 Shah Cement Industries Ltd. Munshigonj Dhaka Portland Composite Cement (CEM-II/A-M)

Shah Special BDS EN 197-1 20674 Nov/17 27/Aug/20

115 BRR Food & Beverage Kushtia Khulna Fortified Soyabean Oil BRR Tripty BDS1769:2014 20344 22/Mar/17 21/Dec/19116 MACCA CEMENT FACTORY LTD Jessore Khulna Portland Composite Cement

(CEM-II/A-M)Maccem BDS EN 197-1 20678 Oct/17 17/May/20

117 SHEIKH CEMENT MILLS LTD Khulna Khulna Portland Composite Cement (CEM-II/B-M)

S.B BDS EN 197-1 20679 Dec/17 17/May/20


Narayangonj Dhaka Blast Furnace Cement (CEM-III/A)

Holcim Grey BDS EN 197-1 20735 Nov/17 29/Oct/20

119 CONFIDENCE CEMENT LTD. Chattagram Chattagram Portland Composite Cement (CEM-II/A-M)

CONFIDENCE BDS EN 197-1 20737 Nov/17 29/Oct/20

120 Family Food & Beverage Chattogram Chattogram Fortified Soyabean Oil OK BDS1769:2014 20424 23/Apr/17 12/Mar/20121 S. A. Oil Refinery Limited Chattogram Chattogram Fortified Soyabean Oil MUSKAN BDS1769:2014 20617 20/Aug/17 01/Apr/20122 LafargeHolcim Bangladesh Limited Narayangonj Dhaka Portland Limestone Cement

(CEM-II/B-L, 42.N & 32.5N)SUPERCRETE, PLASTERCRETEBDS EN 197-1 20763 12/13/17 &

04/15/18 (Re-issue)

29/Oct/20

123 Unique Cement Industries Ltd. Narayangonj Dhaka Blast Furnace Cement (CEM-III/A)

Fresh BDS EN 197-1 20821 Nov/18 26/Dec/20

124 The ACME Agrovet & Beverages Ltd. Dhaka Dhaka Fruit Drinks (Mango) ACME Classic, ACME Premium

BDS 1581 VPCS 102 Sep/16 31/Jul/19

125 Rashid Oil Mills Limited Pabna Rajshahi Fortified Soyabean Oil White Gold BDS 1769:2014 20758 30/Oct/17 05/Dec/20126 Mymensingh Agro Ltd. Gazipur Dhaka Fruit Drinks (Mango) PRAN Frooto,

Sundrop, Fruitela, Fazlee, Pran, Pran

Cool, Joy, Pran Greenlife

BDS 1581 VPCS 105 Nov/16 31/Oct/19



127 AST Beverage Ltd. Narayangonj Dhaka Fruit Drinks (Mango) Mangolee, Mango King

BDS 1581 VPCS 110 Nov/16 30/Nov/19

128 Danish Condensed Milk (Bangladesh) Ltd. (Unit-2)

Narayangonj Dhaka Fruit Drinks (Mango) Danish Garden Fresh Popular, Danish Garden

Fresh Premimum, Danish Garden Fresh Standard

BDS 1581 VPCS 113 Jan/17 30/Nov/19

129 Hashem Foods Ltd. Narayangonj Dhaka Fruit Drinks (Mango) Shezan, Shezan Classic, Sajeeb,

Shezan Premium, Sajeeb Junior, Frootina, Puro, Gulp, Frootina

Junior, Puro Junior, Shezan School

BDS 1581 VPCS 114 Jan/17 30/Nov/19

130 Prome Agro Foods Ltd. (2nd Project) Dhaka Dhaka Fruit Drinks (Mango) PROME AAM RAS

BDS 1581 VPCS 115 Jan/17 30/Nov/19

131 Transcom Beverage Ltd Gazipur Dhaka Fruit Drinks (Mango) Slice BDS 1581 VPCS 121 Mar/17 29/Feb/20132 Abul Khair Condensed Milk and

Beverage Ltd.Chattagram Chattagram Fruit Drinks (Mango) Starship, Starship

FruityBDS 1581 VPCS 122 Feb/18 28/Feb/20

133 ELSON FOODS Narayangonj Dhaka Wafer Biscuits (Chocolate coated)

ELSON PERKY & ELSON Crunchy

Three Cheers, ELSON HELLO

KITTY

BDS 1001 VPCS 130 Jul/17 30/Jun/20

134 Bangladesh Edible Oil Ltd. Narayangonj Dhaka Fortified Palm Olein Meizan, Lucky BDS 1774:2014 VPCS 109 24/Nov/16 31/Oct/19135 Deepa Food Products Limited Narayangonj Dhaka Fortified Palm Olein Natural BDS 1774:2014 VPCS 166 11/Feb/16 27/Jan/19136 Dessert Food Beverage & Agro

Industries Limited Norshingdi Dhaka Fruit Drinks (Mango, Apple) Buffalo BDS 1581 VPCS 167 Nov/16 27/Jan/19

137 Igloo Dairy Limited Dhaka Dhaka Flavoured Milk (Mango, Chocolate)

IGLOO BDS 1741 VPCS 170 Mar/16 27/Jan/19

138 Danish Foods Ltd. Narayangonj Dhaka Wafer Biscuits (Milk, Banana) 2fun BDS 1001 VPCS 187 Jun/16 24/May/19

139 Globe Biscuit & Dairy Milk Ltd. Noakhali Dhaka Wafer Biscuits (Orange, Banana, Strawberry, Chocolate)

Twinkle, Crusty, Picco

BDS 1001 VPCS 188 Jun/16 24/May/19

140 Brac Dairy & Food Project Gazipur Dhaka Flavoured Milk (Mango, Chocolate)

Aarong Dairy BDS 1471 VPCS 194 Jul/16 21/Jun/19


Narayangonj Dhaka Fortified Palm Olein Family BDS 1774:2014 VPCS 168 18/Feb/16 27/Jan/19

142 Modern Herbal Food Limited Dhaka Dhaka Chutney (Tamarind) Modern Herbal Super

BDS 521 VPCS 197 Oct/16 21/Jun/19

143 Super Oil Refinery Limited Narayangonj Dhaka Fortified Palm Olein Family BDS 1774:2014 VPCS 169 18/Feb/16 27/Jan/19144 Khadiza Food Products Narayangonj Dhaka Fortified Palm Olein City, Cityzen BDS 1774:2014 VPCS 172 15/Mar/16 07/Mar/19145 J B Food Services Chattogram Chattogram Fortified Palm Olein Keya BDS 1774:2014 VPCS 183 31/May/16 24/Apr/19146 Bay-Fishing Corporation Limited Chattogram Chattogram Fortified Palm Olein Hilsa BDS 1774:2014 VPCS 185 25/May/16 24/Apr/19147 VOTT Oil Refineries Limited Chattogram Chattogram Fortified Palm Olein Natural BDS 1774:2014 VPCS 186 25/May/16 24/Apr/19148 Mostafa Food Products Narayangonj Dhaka Fortified Palm Olein Olivit BDS 1774:2014 VPCS 189 28/Jun/16 21/Jun/19149 Jibon Food Products Narayangonj Dhaka Fortified Palm Olein JIBON, SAFA BDS 1774:2014 VPCS 196 01/Aug/16 21/Jun/19150 Insaf Food Products Dhaka Dhaka Chutney (Tamarind, Boroi) Sigma BDS 521 VPCS 220 Oct/16 17/Oct/19151 Confidence Edible Oil Limited Chattogram Chattogram Fortified Palm Olein Confidence BDS 1774:2014 VPCS 200 16/Aug/16 21/Jun/19152 BRAC Dairy & Food Project Gazipur Dhaka Low Fat Milk Aarong Dairy BDS 1866 VPCS 225 Nov/16 17/Oct/19153 Akij Food & Beverage Ltd. Dhaka Dhaka Fruit Drinks (Mango, Red

Grape)Frutika, Aafi BDS 1581 VPCS 227 Jan/17 17/Oct/19

154 Rangpur Dairy & Food Products Ltd. Rangpur Rajshahi Fruit Drinks (Mango) RD Fazli, RD Juicila BDS 1581 VPCS 236 Mar/17 21/Dec/19

155 J S Marketing Chattogram Chattogram Fortified Palm Olein Minar BDS1769:2014 VPCS 202 06/Sep/16 21/Jun/19156 Pran Foods Ltd. Norshingdi Dhaka Fruit Drinks (Mango) Pran, Pran Fruitix,

Fruit FunBDS 1581 VPCS 246 Jun/17 16/Apr/20

157 Khan Food & Agrobase Industries Limited

Dhaka Dhaka Fortified Palm Olein Mon, Mother, Pogo BDS 1774:2014 VPCS 206 18/Sep/16 21/Jun/19

158 PRAN AGRO LTD. Natore Dhaka Edible Jell PRAN Magic Cup PLUS,

PRANLITCHI, PRAN fruit

MAGIC Plus, PRAN Fruit Magic, PRAN Love Jello, PRAN Magic Cup

BDS 1808:2015 VPCS 258 Jan/18 16/Jul/20

159 Abir Consumar Food Products Cumilla Chattogram Fortified Palm Olein Star BDS 1774:2014 VPCS 209 18/Sep/16 27/Aug/19160 Agricultural Marketing Co. Ltd. Norshingdi Dhaka Fruit Drinks (Mango, Mixed

Fruit, Litchi)Pran, Little Star,

Pran FrootoBDS 1581 VPCS 69 Apr/16 28/Feb/19

161 Daudia Oil Mill Feni Chattogram Fortified Palm Olein Chan Marka, Double Chan

Marka

BDS 1774:2014 VPCS 211 07/Sep/16 27/Aug/19



162 Pran Dairy Ltd. Norshingdi Dhaka Fruit Drinks (Mango, Mixed Fruit)

Pran, Joy, Pran Frooto, Pran

Junior, Fruit Fun

BDS 1581 VPCS 70 Apr/16 28/Feb/19

163 Roots Food and Beverage Ltd. Dhaka Dhaka Fruit Drinks (Mango) Lilia, Fun Fruitz BDS 1581 VPCS 89 Oct/16 30/Apr/19164 Bangladesh Edible Oil Ltd. Dhaka Dhaka Fortified Palm Olein Meizan, Lucky BDS 1774:2014 VPCS 215 20/Sep/16 27/Aug/19165 AL HAJ MOSTAFA HAKIM CEMENT

INDUSTRIES LTD.Chattagram Chattagram Portland Cement (CEM-I) TAJMAHAL BDS EN 197-1 20895 Mar/18 26/Dec/20

166 Life Food & Consumer Company Norshingdi Dhaka Fortified Palm Olein Life BDS 1774:2014 VPCS 216 26/Sep/16 27/Aug/19167 NGS CEMENT INDUSTRIES

LIMITEDChattagram Chattagram Portland Composite Cement

(CEM-II/B-M)NGS BDS EN 197-1 20903 Mar/18 26/Dec/20


Chattagram Chattagram Portland Composite Cement (CEM-II/A-M)

RUBY BDS EN 197-1 20904 Mar/18 26/Dec/20

169 Family Food & Beverage Chattogram Chattogram Fortified Palm Olein OK BDS 1774:2014 VPCS 240 23/Apr/17 12/Mar/20170 DESHBANDHU FOOD & BEVERAGE

LTD.Narshingdi Dhaka Frrit Drinks ()Mango) DESHBANDHU BDS 1581 VPCS-262 Apr/18 20/Mar/21

171 Green Trade House Norshingdi Dhaka Fortified Palm Olein TASTY BDS 1774:2014 VPCS 245 15/May/17 12/Mar/20

172 Gazi Cement Mills Ltd Narshingdi Dhaka Portland Composite Cement, CEM-II/B-M, 42.5 N

GAZI BDS EN 197-1 21032 May/18 20/Mar/21

173 BANGA MILLERS LIMITED Pabna Rajshahi Wafer Biscuit Mr. Bunny BDS 1001:2010 VPCS-263 May/18 26/Dec/20174 Anwar Cement Ltd. Munshigonj Dhaka Portland Composite Cement,

CEM-II/B-M, 42.5 NANOWAR, SHAKTIMANBDS EN 197-1 210.35 May/18 27/Aug/20

175 Yoko Food & Agro Ltd. Dhaka Dhaka Wafer Biscuit (Chocolate Coated, Milk & Strawberry)

Yoko Yum, Yoko Yo YoBDS 1001:2010 VPCS-266 Jul/18 24/Jun/21

176 Jamuna Edible Oil Industries Limited (Unite-2)

Rajshahi Rajshahi Fortified Soyabean Oil Natura BDS 1769:2014 20980 26/Apr/18 20/Mar/21

177 Aftab Milk & Milk Products Ltd Gazipur Dhaka Pasteurized Milk AFTAB BDS 1702 21081 Jul/18 24/Jun/21178 Jamuna Edible Oil Industries Limited

(Unite-2)Rajshahi Rajshahi Fortified Palm Olein Natura BDS 1774:2014 20981 26/Apr/18 20/Mar/21

179 Hobigonj Agro Ltd. Habiganj Sylet Fruit Drinks (Mango) PRAN Frooto BDS 1581:2015 VPCS-265 Jul/18 24/Jun/21

180 Adarsha Food Beverage & Co. Ltd. Chapainawabgonj

Rajshahi Fortified Soyabean Oil REHANA BDS 1769:2014 21083 10/Jul/18 30/Mar/19

181 Adarsha Food Beverage & Co. Ltd. Chapainawabgonj

Rajshahi Fortified Palm Olein REHANA BDS 1774:2014 21084 10/Jul/18 30/Mar/19

182 Mongla Cement Factory Bagerhat Khulna Portland Composite Cement (CEM-II/A-M), 42.5 N

Elephant BDS EN 197-1 21112 Jul/18 20/Mar/21

183 Northern Consumer Products Limited Sirajgonj Rajshahi Fortified Edible Rice Bran Oil Shaad BDS 1886: 2014 21088 11/Jul/18 24/Jun/21

184 Western Agro Products Limited Bogura Rajshahi Fortified Edible Rice Bran Oil Branola BDS 1886:2014 VPCS 252 17/Sep/17 16/Jul/20

185 KBC Agro Products Private Limited Dhaka Dhaka Fortified Soyabean Oil Health Care BDS 1769:2014 21110 27/Aug/18 24/Jun/21186 Holcim Cement (Bangladesh) Ltd.

(Plant-1)Narayangonj Dhaka Portland Cement (CEM-I) Holcim BDS EN 197-1 20985 May/18 21/Mar/21

187 DANISH CONDENSED MILK BANGLADESH LIMITED

Narayangonj Dhaka Sweetened Condensed Filled Milk

Danish BDS1780:2014 21232 26/Sep/18 04/Sep/21


Narayangonj Dhaka Blast Furnace Cement (CEM-III/A)

Holcim Grey BDS EN 197-1 20735 Nov/17 29/Oct/20

189 ABUL KHAIR MILK PRODUCTS LTD. Chattogram Chattogram Sweetened Condensed Filled Milk

star ship BDS1780:2014 21229 25/Sep/18 30/Jun/21

190 Universal Food Ltd. Pabna Rajshahi Chutney (Boroi, Tamarind) Universal TASTY BDS 521 VPCS 268 Sep/18 20/Mar/21191 DIAMOND CEMENT LTD. Chattagram Chattagram Portland Composite Cement

(CEM-II/A-M, 42.5 N)DIAMOND Extreme BDS EN 197-1 21048 Jul/18 20/Mar/21

192 Emerald Oil Industries Ltd. Sherpur Khulna Fortified Edible Rice Bran Oil Spondon BDS 1886:2014 VPCS 165 08/Feb/16 27/Jan/19

193 DIAMOND CEMENT LTD. Chattagram Chattagram Portland Composite Cement (CEM-II/B-M, 42.5 N)

DIAMOND Xtreme BDS EN 197-1 18446 Aug/17 20/Apr/20

194 ACI Edible Oils Ltd. (Factory: Western Agro Products Limited)

Naogaon Rajshahi Fortified Edible Rice Bran Oil ACI Nutrilife BDS 1886:2014 VPCS 171 14/Mar/16 07/Mar/19

195 CONFIDENCE CEMENT LTD. Chattagram Chattagram Blast Furnace Cement (CEM-III/A, 32.5N)

CONFIDENCE BDS EN 197-1 21054 Jun/18 20/Mar/21

196 KBC Agro Products Private Limited Dhaka Dhaka Fortified Edible Rice Bran Oil Health Care BDS 1886:2014 VPCS 174 29/Mar/16 07/Mar/19

197 Bangladesh Edible Oil Ltd. Narayangongj Dhaka Fortified Edible Rice Bran Oil Fortune BDS 1886:2014 VPCS 176 03/May/16 24/Apr/19

198 Jamuna Edible Oil Industries Ltd. Rajshahi Rajshahi Fortified Edible Rice Bran Oil Natura BDS 1886:2014 VPCS 191 29/Jun/16 22/Jun/19

199 Al-Noor Agro Industries Ltd. Bogura Rajshahi Fortified Edible Rice Bran Oil Al-Noor. Nobanno BDS 1886:2014 VPCS 222 08/Oct/16 22/Jun/19

200 Tamim Agro Industries Ltd. Bogura Rajshahi Fortified Edible Rice Bran Oil Dhani BDS 1886:2014 VPCS 212 07/Sep/16 27/Aug/19

201 Majumdar Barn Oil Mills Limited Jashore Khulna Fortified Edible Rice Bran Oil Pure Gold BDS 1886:2014 VPCS 241 27/Apr/17 27/Aug/19

202 AM Bran Oil Company Ltd Tangail Dhaka Fortified Edible Rice Bran Oil Nature Fresh BDS 1886:2014 VPCS 203 05/Sep/16 27/Aug/19



203 Majumder Products Ltd. Bogura Rajshahi Fortified Edible Rice Bran Oil Swarna BDS 1886:2014 VPCS 228 17/Jan/16 21/Dec/19

204 MRT Agro Products BD Mymensingh Dhaka Fortified Edible Rice Bran Oil Krishani BDS 1886:2014 VPCS 229 22/Jan/16 21/Dec/19

205 Rashid Oil Mills Limited Pabna Rajshahi Fortified Edible Rice Bran Oil White Gold BDS 1886:2014 VPCS 230 24/Jan/17 21/Dec/19


Narayangon Dhaka Fortified Edible Rice Bran Oil Pusti Better Life BDS 1886:2014 VPCS 226 05/Jan/17 21/Dec/19

207 Agrotech International Ltd Mymensigh Dhaka Fortified Edible Rice Bran Oil Puriva BDS 1886:2014 VPCS 237 30/Mar/17 12/Mar/20

208 Green Oil & Poulty Feed Industries Rangpur Rajshahi Fortified Edible Rice Bran Oil Bashmoti BDS 1886:2014 VPCS 250 24/Sep/17 16/Apr/20

209 Natore Agro Limited Natore Rajshahi Fortified Edible Rice Bran Oil Pran BDS 1886:2014 VPCS 256 31/Dec/17 29/Oct/20

210 Rongdhonu Agro & Beverage Limited Narayangonj Dhaka Fortified Soyabean Oil Promex BDS 1769:2014 21224 25/Sep/18 04/Sep/21

211 National Cement Mills Ltd. Chattagram Chattagram Portland Cement (CEM-I) PREMIER BDS EN 197-1 21292 28.10.2018 04/Sep/21

212 Bangladesh Edible Oil Ltd. Narayangonj Dhaka Fortified Soyabean Oil Rupchanda, Veola BDS1769:2014 18982 21/Mar/17 17/Oct/19213 National Cement Mills Ltd. Chattagram Chattagram Portland Composite Cement

(CEM-II/B-M)PREMIER BDS EN 197-1 21293 28.10.2018 04/Sep/21

214 National Cement Mills Ltd. Chattagram Chattagram Portland Composite Cement (CEM-II/A-M)

PREMIER BDS EN 197-1 21294 28.10.2018 04/Sep/21

215 SIAM CITY Cemnt Bangladesh Ltd. Narayangonj Dhaka Blast Furnace Cement (CEM-III/A, 32.5N)

INSEE BDS EN 197-1 21307 Nov/19 22/Nov/21

216 Elson Foods Narayangonj Dhaka Edible Jell (Lychee)ELSON LYCHEE, ELSON JELLY BELLYBDS 1801:2015 21323 13.11.2018 17.10.2021217 Shah Cement Industries Ltd. Munshigonj Mukterpur Portland Cement (CEM-I),

52.5 NSHAH CEMENT BDS EN 197-1 21309 01.11.2018 24.06.2021

218 Shah Cement Industries Ltd. Munshigonj Mukterpur Blast Furnace Cement (CEM-III/A), 32.5 N

SHAH CEMENT BDS EN 197-1 21310 01.11.2018 04.09.2021

219 Bangladesh Milk Producers' Co-operative Union Limited

Dhaka Dhaka Flavoured Milk (Chocolate) milk vita BDS 1471:2012 VPCS-264 Apr/18 26/Dec/20

220 Metrocem Cement Ltd. Munshigonj Dhaka Portland Composite Cement (CEM-II/A-M), 42.5 N

Metrocem BDS EN 197-1 20935 Mar/18 26/Dec/20

221 Prime Pusti Ltd. Rangpur Sadar Fruit Drinks (Mango) Sonic Hari Bhanga BDS 1581:2015 VPCS-259 Mar/18 26/Dec/20222 Bangladesh Edible Oil Ltd. Pabna Rajshahi Fortified Soyabean Oil Rupchanda BDS 1769:2014 21303 Oct/21 04/Sep/21223 Bashundhara Industrial Complex

Ltd.Narayangonj Bandor Portland Composite Cement

(CEM-II/A-M), 42.5 NBashundhara, KING BDS EN 197-1 18533 Feb/18 30/Jun/20

224 Ali Natural Oil Mills & Agro Industries Limited

Jamalpur Dhaka Fortified Edible Rice Bran Oil

Kollany BDS 1886:2014 21360 Nov/18 22/Oct/21

225 Premier Cement Mills Ltd Munshigonj Dhaka Blast Furnace Cement (CEM-III/A) 32.5 N

PREMIER BDS EN 197-1 21317 Nov/18 22/Oct/21

226 S Alam Super Edible Oil Limited Chattagram Chattagram Fortified Soyabean Oil Mach Marka BDS 1769:2014 20308 Mar/17 08/Jan/20227 S Alam Super Edible Oil Limited Chattagram Chattagram Fortified Palm Olein Mach Marka BDS 1774:2014 VPCS 235 Mar/17 08/Jan/20228 S Alam Vegetable Oil Ltd. Chattagram Chattagram Fortified Soyabean Oil Morog Marka BDS 1769:2014 20309 Mar/17 08/Jan/20229 S Alam Vegetable Oil Ltd. Chattagram Chattagram Fortified Palm Olein Morog Marka BDS 1774:2014 VPCS234 Mar/17 08/Jan/20230 ACI Edible Oils Ltd. Naogaon Rajshahi Fortified Soyabean Oil ACI Nutrilife BDS 1769:2014 21093 16/Jul/18 24/Jun/21231 Pran Agro Ltd. Natore Rajshahi Chutney (Tamarind, Olive,

Boroi, Mixed Fruit, Date-Tamarind)

PRAN, PRAN SUPER, PRAN

BURMESE

BDS521:2011 VPCS-33 03.10.2017 30.6.2020

232 BD Foods Ltd. Gazipur Dhaka Chutney BD Foods BDS521:2011 VPCS-163 10.01.2016 16.12.2018

233 Prime Pusti Ltd. Rangpur Rangpur Chutney (Boroi, Tamarind) SONIC BDS521:2011, (Amendment-1,

2018)

VPCS-272 26.11.2018 04.9.2021

234 Akij Food & Beverage Ltd. Dhaka Dhaka Flavoured Milk (Mango, Chocolate)

FARM FRESH BDS 1471 VPCS 131 Jan/17 30/Jun/20

235 Uttar Bango Dairy Gazipur Dhaka Pasteurized Milk milk fresh, one milkBDS 1702:2002 21217 Sep/18 04/Sep/21236 HAB Oil and Food Products Moulovibazar Sylhet Fortified Soyabean Oil Jonaki BDS1769:2014 19628 31/May/16 24/Apr/19

237 HAB Oil and Food Products Moulovibazar Sylhet Fortified Palm Olein Five Star Super BDS 1774:2014 VPCS 182 31/May/16 24/Apr/19

238 Ichamoti Dairy & Food Products Pabna Rajshahi Pasteurized Milk PURA BDS 1702 20640 Aug/17 16/Jul/20

239 Karnafully Food Products Sylhet Sylhet Fortified Soyabean Oil Shapla BDS1769:2014 19420 15/Mar/16 07/Mar/19240 Karnafully Food Products Sylhet Sylhet Fortified Palm Olein Shapla BDS 1774:2014 VPCS 198 10/Aug/16 22/Jun/19241 M S Food Products Dhaka Dhaka Fortified Soyabean Oil Today, Dolphin BDS1769:2014 19626 25/May/16 24/Apr/19242 M S Food Products Dhaka Dhaka Fortified Palm Olein Today Natural,

Dolphin NaturalBDS 1774:2014 VPCS 184 25/May/16 24/Apr/19

243 MH Edible Oil Products Limited Narayangonj Dhaka Fortified Soyabean Oil Neel BDS1769:2014 19918 21/Aug/16 21/Jun/19244 MH Edible Oil Products Limited Narayangonj Dhaka Fortified Palm Olein Neel BDS 1774:2014 VPCS 223 14/Nov/16 27/Aug/19245 MH Edible Oil Products Limited Narayangonj Dhaka Fortified Edible Palm Oil Neel BDS 1770:2014 20086 24/Nov/16 27/Aug/19246 Omi Food Products Sylhet Sylhet Fortified Soyabean Oil Sunrise, Peush BDS1769:2014 19950 05/Sep/16 21/Jun/19

247 Omi Food Products Sylhet Sylhet Fortified Palm Olein Sunrise, Peush BDS 1774:2014 VPCS 208 05/Sep/16 21/Jun/19248 R B Oil & Food Products Gazipur Dhaka Fortified Soyabean Oil Rani BDS1769:2014 19944 06/Sep/16 21/Jun/19249 R B Oil & Food Products Gazipur Dhaka Fortified Palm Olein Rani BDS 1774:2014 VPCS 205 06/Sep/16 21/Jun/19250 RB Edible Food Products Sylhet Sylhet Fortified Soyabean Oil Tripti BDS1769:2014 19894 16/Aug/16 21/Jun/19



251 RB Edible Food Products Sylhet Sylhet Fortified Palm Olein RB BDS 1774:2014 VPCS 199 16/Aug/16 21/Jun/19252 Rony Edible Oil & Food Products Sylhet Sylhet Fortified Soyabean Oil Diamond BDS1769:2014 19951 08/Sep/16 21/Jun/19253 Rony Edible Oil & Food Products Sylhet Sylhet Fortified Palm Olein Rony, Golden BDS 1774:2014 VPCS 207 08/Sep/16 21/Jun/19254 Safety Edible Products Ltd. Narayangonj Dhaka Fortified Soyabean Oil Safety, Shakti Plus, BDS1769:2014 19731 29/Jun/16 22/Jun/19

255 Safety Edible Products Ltd. Narayangonj Dhaka Fortified Palm Olein Safety, Shakti Plus, BDS 1774:2014 VPCS 190 30/Jun/16 22/Jun/19

256 Saif Edible Food Packaging Dhaka Dhaka Fortified Soyabean Oil Makka BDS1769:2014 19822 31/Jul/16 21/Jun/19

257 Saif Edible Food Packaging Dhaka Dhaka Fortified Palm Olein Sabrina BDS 1774:2014 VPCS 195 31/Jul/16 21/Jun/19258 Sharaf Enterprise & Agro Ltd. Jamalpur Dhaka Pasteurized Milk Samara BDS 1702 19485 Apr/16 27/Jan/19259 Taitanic Foods Limited Narayangonj Dhaka Fortified Soyabean Oil Titanic BDS1769:2014 20206 16/Jan/17 21/Dec/19260 Taitanic Foods Limited Narayangonj Dhaka Fortified Palm Olein Titanic BDS 1774:2014 VPCS 242 11/May/17 16/Apr/20

N.O.

Name of the Producer

Distrtict Division Product Name Brand Standard Number

Technical code-

granting status

Lic No Issue Date Status

1 Satata Food Products

Munshigonj Dhaka Fortified Soyabean Oil Minister BDS1769:2014 A-III New 19896 17/Aug/16 21/Jun/19

2 Satata Food Products

Munshigonj Dhaka Fortified Palm Olein Mazola BDS 1774:2014 A-III New VPCS 201 17/Aug/16 21/Jun/19

3 Madina Oil Mill Norshingdi Dhaka Fortified Soyabean Oil Madina BDS1769:2014 A-III New 19903 06/Sep/16 21/Jun/19

4 Madina Oil Mill Norshingdi Dhaka Fortified Palm Olein Madina BDS 1774:2014 A-III New VPCS 204 06/Sep/16 21/Jun/19

5 Laboni Food & Consumer Products

Narayangonj Dhaka Fruit Drinks (Mango) Laboni Fruitila BDS 1581 A-II New VPCS 155 15-Jan 17-Oct-18

Cancelled License List

N. OName of the Producer Distrtict Division Product Name Brand Standard Number Technical code-

granting statusLic No Issue Date Status

1 HAB Oil and Food Products Moulovibazar Sylhet Fortified Soyabean Oil Jonaki BDS1769:2014 A-III New 19628 31/May/16 24/Apr/19

2 HAB Oil and Food Products Moulovibazar Sylhet Fortified Palm Olein Five Star Super BDS 1774:2014 A-III New VPCS 182 31/May/16 24/Apr/19

3 Ichamoti Dairy & Food Products Pabna Rajshahi Pasteurized Milk PURA BDS 1702 A-I New 20640 Aug/17 16/Jul/20

4 Karnafully Food Products Sylhet Sylhet Fortified Soyabean Oil Shapla BDS1769:2014 A-III New 19420 15/Mar/16 07/Mar/195 Karnafully Food Products Sylhet Sylhet Fortified Palm Olein Shapla BDS 1774:2014 A-III New VPCS 198 10/Aug/16 22/Jun/196 M S Food Products Dhaka Dhaka Fortified Soyabean Oil Today, Dolphin BDS1769:2014 A-III New 19626 25/May/16 24/Apr/19

7 M S Food Products Dhaka Dhaka Fortified Palm Olein Today Natural, Dolphin Natural

BDS 1774:2014 A-III New VPCS 184 25/May/16 24/Apr/19

8 MH Edible Oil Products Limited Narayangonj Dhaka Fortified Soyabean Oil Neel BDS1769:2014 A-III New 19918 21/Aug/16 21/Jun/19

9 MH Edible Oil Products Limited Narayangonj Dhaka Fortified Palm Olein Neel BDS 1774:2014 A-III New VPCS 223 14/Nov/16 27/Aug/19

10 MH Edible Oil Products Limited Narayangonj Dhaka Fortified Edible Palm Oil Neel BDS 1770:2014 A-III New 20086 24/Nov/16 27/Aug/19

11 Omi Food Products Sylhet Sylhet Fortified Soyabean Oil Sunrise, Peush BDS1769:2014 A-III New 19950 05/Sep/16 21/Jun/1912 Omi Food Products Sylhet Sylhet Fortified Palm Olein Sunrise, Peush BDS 1774:2014 A-III New VPCS 208 05/Sep/16 21/Jun/1913 R B Oil & Food Products Gazipur Dhaka Fortified Soyabean Oil Rani BDS1769:2014 A-III New 19944 06/Sep/16 21/Jun/1914 R B Oil & Food Products Gazipur Dhaka Fortified Palm Olein Rani BDS 1774:2014 A-III New VPCS 205 06/Sep/16 21/Jun/1915 RB Edible Food Products Sylhet Sylhet Fortified Soyabean Oil Tripti BDS1769:2014 A-III New 19894 16/Aug/16 21/Jun/1916 RB Edible Food Products Sylhet Sylhet Fortified Palm Olein RB BDS 1774:2014 A-III New VPCS 199 16/Aug/16 21/Jun/19

17 Rony Edible Oil & Food Products Sylhet Sylhet Fortified Soyabean Oil Diamond BDS1769:2014 A-III New 19951 08/Sep/16 21/Jun/19

18 Rony Edible Oil & Food Products Sylhet Sylhet Fortified Palm Olein Rony, Golden BDS 1774:2014 A-III New VPCS 207 08/Sep/16 21/Jun/19

19 Safety Edible Products Ltd. Narayangonj Dhaka Fortified Soyabean Oil Safety, Shakti Plus, BDS1769:2014 A-III New 19731 29/Jun/16 22/Jun/19

20 Safety Edible Products Ltd. Narayangonj Dhaka Fortified Palm Olein Safety, Shakti Plus, BDS 1774:2014 A-III New VPCS 190 30/Jun/16 22/Jun/1921 Saif Edible Food Packaging Dhaka Dhaka Fortified Soyabean Oil Makka BDS1769:2014 A-III New 19822 31/Jul/16 21/Jun/19

22 Saif Edible Food Packaging Dhaka Dhaka Fortified Palm Olein Sabrina BDS 1774:2014 A-III New VPCS 195 31/Jul/16 21/Jun/19

23 Sharaf Enterprise & Agro Ltd. Jamalpur Dhaka Pasteurized Milk Samara BDS 1702 A-I New 19485 Apr/16 27/Jan/19

24 Taitanic Foods Limited Narayangonj Dhaka Fortified Soyabean Oil Titanic BDS1769:2014 A-III New 20206 16/Jan/17 21/Dec/19

25 Taitanic Foods Limited Narayangonj Dhaka Fortified Palm Olein Titanic BDS 1774:2014 A-III New VPCS 242 11/May/17 16/Apr/20

26 Monzil Foods Sylhet Sylhet Fortified Soyabean Oil Monzil BDS1769:2014 A-III New 19265 21/Jan/16 16/Dec/18

27 Monzil Foods Sylhet Sylhet Fortified Palm Olein Monzil BDS 1774:2014 A-III New VPCS 164 21/Jan/16 16/Dec/18

28 Shelaidah Dairy Kushtia Khulna Pasteurized Milk Ultra Milk BDS 1702 A-I New 19312 Aug/16 16/Dec/18

Suspended License LIist 2018