Upload
nguyennhu
View
221
Download
0
Embed Size (px)
Citation preview
0102
05061418192023243638414244454648
Table of ContentProduction WorkFlow
FLAT PRODUCTS Steel Plate Hot Rolled Coil Hot Roll Picklet Oil (HRPO) Cold Roll Coil (CRC) Welded BeamTUBULAR PRODUCTS ERW Pipe Spiral Pipe Rectangular Pipe & Square PipeFORMING PRODUCTS Angle (Cold Formed) Bridge Deck Floor Deck Expanded Mesh Lipped Channel
50535455565859606264656672757677
Roof & WallsheetingBAR & WIRE PRODUCTS Wire Rod Annealed Wire Galvanized Wire Nail Wire Nails Round / Deformed Bar Sagrod Wire Mesh Anchor BoltCertificationServicesSteel ApplicationsGunung Steel Group ProductLocation Map
Table Of Content Introduction
Embracing the motto “One Stop Steel Shop”, our company was formed in 2000 under the name PT. Gunung Raja Paksi (GRP). With the establishment of our company, we at PT. Gunung Raja Paksi are able to expand into a wider range of steel products and this has put our group, Gunung Steel Group, as a leading steel producer in Indonesia.We commissioned our first hot rolled steel machine in the last quarter of the year 2000. By the late of 2001, our mill has reached an operating level of 82% of the capacity, due to the popular demand of our product. Our suc-cess in the industry has been made with the advanced technology equipped throughout our plants. This ensures that we are able to meet the needs of our customer no matter how complicate it may be. Among the products we currently produces are the flat, coils, welded pipe, decking, and wire steel products.To better serve the needs of our customers, we at GRP have support centre division to provide services for further customization of our products to suit specific requirements. The services we provides are:• EngineeringServiceCentre(ESC)–coversstructuralengineeringconsultation,drawing,drafting,andcom-
ponents/parts fabrication.• CoilServiceCenter(CSC)coversfabricationforHotRolledCoilwithwiderangeofcustomizationincluding
Cut to length, Leveling, Skin Pass and Slitting.• PlateServiceCenter(PSC)coversfabricationforHotRolledSteelPlatewithitsstateoftheartmachinary
including Cut to shape, Bending, Drilling, Punching, Shearing, Stamping.• FormingServiceCenter (FSC) covers fabrication forColdFormedProducts suchasC-Channel, Electric
Pole, Equal Angle, Floor Deck, Guard Rail, Lipped Channel, Hollow Section, etc.• BarServiceCenter(BSC)coversfabricationforRoundSteelBarandRodBracingserviceprovidedincludes
Bending, Cut to Length, Threading, Welding.
PT. Gunung Raja Paksi commissioned its first hot rolled steel plate in the last quarter of the year 2000.
Table of Content 01
At PT. Gunung Raja Paksi we understand the diverse demand for this form of flat steel as we produce steel plates from Mild Steel, High-Strength Low Alloy, Pressure Vessel, Ship Building Plates, and for general purpose uses.
We also understand the various uses and applications of steel plates, and as one of the leading steel mill, we can produce the majority of plate grades and standard as issued by the world’s major third party certification entities such as BV, ABS, BKI, DNV, LR, GL, TUV, NK & CE Marked, and each with their different sub-grades.
To further enhance the performance of our steel product, we have recent-ly added a normalizing facility. This process is to accomodate with a mini-mum thickness of 8mm and maximum 80mm steel plate and will provide the additional performance enhancement to our high tensile plate range.
With the combination of experience we have accumulate through the years in the industry and the different type of cutting machine we have at our disposal, we are also able to fulfill the majority of sizes and dimensions required by our customers.
Standard & Specification : AS 3678, ASTM, JIS G 3106, DIN 17100, EN 10025, JIS G 3101, Standard Size : Min. width 1200mm, max. width 3050mm, Length: as per request (15 meter)Annual Capacity : 900.000 MT/Year
Steel Plate
0706 Flat Products | Steel Plate Flat Products | Steel Plate
CALCULATED PLATE WEIGHT (FROM THICKNESS & SIZE)
Width x Length(in mm)
1219x
2438
4’ x 8’
48 x 96
1219x
6096
4’ x 20’
48 x 240
1524x
3048
5’ x 10’
60 x 120
1524x
6096
5’ x 20’
60 x 240
1524x
9144
5’ x 30’
60 x 360
1524x
12192
5’ x 40’
60 x 480
1829x
6096
6’ x 20’
72 x 240
1829x
12192
6’ x 40’
72 x 480
2133x
6096
7’ x 20’
84 x 240
2133x
12192
7’ x 40’
84 x 480
2438x
6096
8’ x 20’
96 x 240
2438x
12192
8’ x 40’
96 x 480
2743x
6096
9’ x 20’
108 x 240
2743x
12192
9’ x 40’
108 x 480
3048x
6096
10’ x 20’
120 x 240
3048x
12192
10’ x 40’
120 x 480
3353x
6096
11’ x 20’
132 x 240
3353x
12192
11’ x 40’
132 x 480
Width x Length(in ft)
Width x Length(in inch)
Thickness (mm)
Conculated considering specific gravity of steel as 7.85 Kg/mm2, and dimension in mm. Not Available Sizes
187210233280296327350
373420443467513560583
593607653700747840887933
1.0501.1661.2831.4001.5161.633
1.7501.8661.9832.1002.2162.333
467525583700741817875
9331.0501.1081.1671.2831.4001.458
1.4821.5171.6331.7501.8672.1002.2172.333
2.6252.9173.2083.5003.7924.083
4.3754.6674.9585.2505.5425.833
292328365438463511547
583656693729802875912
926948
1.0211.0941.1671.3131.3861.459
1.6411.8232.0062.1882.3702.553
2.7352.9173.0993.2823.4643.646
583656729875926
1.0211.094
1.1671.3131.3861.4591.6041.7501.823
1.8521.8962.0422.1882.3342.6252.7712.917
3.2823.6464.0114.3764.7405.105
5.4705.8346.1996.5646.9287.293
875985
1.0941.3131.3891.5321.641
1.7501.9692.0782.1882.4072.6252.735
2.7792.8443.0633.2823.5013.9384.1574.376
4.9235.4706.0176.5647.1117.658
8.2048.7519.2989.845
10.39210.939
1.1671.3131.4591.7501.8522.0422.188
2.3342.6252.7712.9173.2093.5013.646
3.7053.7924.0844.3764.6675.2515.5435.834
6.5647.2938.0228.7519.481
10.210
10.93911.66912.39813.12713.85614.586
700788875
1.0501.1121.2251.313
1.4001.5751.6631.7501.9262.1012.188
2.2232.2762.4512.6262.8013.1513.3263.501
3.9394.3764.8145.2515.6896.127
6.5647.0027.4407.8778.3158.752
89
1012
12.71415
16181920222425
25.426283032363840
455055606570
7580859095
100
1.4001.575 1.7502.1012.2232.4512.626
2.8013.1513.3263.5013.8514.2014.376
4.4464.5514.9014.2515.6026.3026.6527.002
7.8778.7529.628
10.50311.37812.253
13.12914.00414.87915.75416.63017.505
817919
1.0211.2251.2961.4291.531
1.6331.8371.9392.0412.2462.4502.552
2.5932.6542.8583.0623.2663.6753.8794.083
4.5935.1045.6146.1246.6357.145
7.6558.1668.6769.1869.697
10.207
1.6331.8372.0412.4502.5932.8583.062
3.2663.6753.8794.0834.4914.8995.104
5.1855.3085.7166.1246.5337.3497.7578.166
9.18610.20711.22812.24913.26914.290
15.31116.33117.35218.37319.39420.414
9331.0501.1671.4001.4821.6331.750
1.8672.1002.2172.3332.5672.8002.917
2.9633.0333.2673.5003.7334.2004.4334.667
5.2505.8336.4177.0007.5838.167
8.7509.3339.917
10.50011.08311.667
1.8672.1002.3332.8002.9633.2673.500
3.7334.2004.4334.6675.1335.6005.833
5.9276.0676.5337.0007.4678.4008.8679.333
10.50011.66712.83314.00015.16716.333
17.50018.66719.83321.50022.16723.333
1.0501.1811.3131.5751.6671.8381.969
2.1002.3632.4942.6252.8883.1503.282
3.3343.4133.6753.9384.2004.7254.9885.250
5.9076.5637.2197.8768.5329.188
9.84510.50111.15711.81412.47013.126
2.1002.3632.6253.1503.3343.6753.938
4.2004.7254.9885.2505.7766.3016.563
6.6686.8267.3517.8768.4019.4514.976
10.501
11.81413.12614.43915.75117.06418.377
19.68921.00222.31523.62724.94026.252
1.1671.3131.4591.7501.8522.0422.188
2.3342.6252.7712.9173.2093.5013.646
3.7053.7924.0844.3764.6675.2515.5435.834
6.5647.2938.0228.7519.481
10.210
10.93911.66912.39813.12713.85614.586
2.3342.6252.9173.5013.7054.0844.376
4.6675.2515.5435.8346.4187.0017.293
7.4107.5858.1688.7519.335
10.50211.08511.669
13.12714.58616.04417.50318.96220.420
21.87923.33724.79626.25427.71329.172
1.2841.4441.6051.9252.0382.2462.407
2.5672.8883.0493.2093.5303.8514.011
4.0764.1724.4934.8145.1345.7766.0976.418
7.2208.0238.8259.627
10.42911.232
12.03412.83613.63914.44115.24316.045
2.5672.8883.2093.8514.0764.4934.814
5.1345.7766.0976.4187.0607.7028.023
8.1518.3448.9859.627
10.26911.55312.19412.836
14.44116.04517.65019.25420.85922.463
24.06825.67227.27728.88230.48632.091
0706 Flat Products | Steel Plate Flat Products | Steel Plate
0908
Specification GradeProduct
Thickness (mm) Thickness Range (mm)
ApplicationTensile Test Impact Test
Mechanical Properties
YS min. (N/mm2)
UTS (N/mm2)
E min. (%)
Average Temp. (Joule)
RemarksBend Test
4 - 150
6 - 80
6 - 80
6 - 80
6 - 150
6 - 80
6 - 80
6 - 80
-
250
ST 37.2
ST 42.2
SS 400
SM 400 A
SM 400 B
SM 400 C
ASTM A-36ASME SA-36
AS 3678
DIN 17100
JIS G 3101
JIS G 3106
-
> 8 ≤ 12 > 12 ≤ 50
> 50≤ 16
> 16 ≤ 40 > 40≤ 16
> 16 ≤ 40 > 40≤ 5
> 5 ≤ 16> 16 ≤ 40
> 40 ≤ 100> 100≤ 16
> 16 ≤ 40> 40 ≤ 100
≤ 16> 16 ≤ 40
> 40 ≤ 100≤ 16
> 16 ≤ 40> 40 ≤ 100
250
260250240235225225275265255245245235215205245235215245235215245235215
-
-
20 oC [27](as per order)
20 oC [27](as per order)
-
-
0oC [27]< 12mm noimpact test
0oC [47]< 12mm noimpact test
400 - 550
410 min
363 - 441
412 - 490
400 - 510
400 - 510
400 - 510
400 - 510
400 - 510
18 (200mm) 21 (50mm)
20 (5.65 VSo)
22 (200mm)21 (200mm)20 (200mm)22 (200mm)21 (200mm)20 (200mm)21 (50mm)
17 (200mm)21 (200mm)
23 (RB-50mm)23 (RB-50mm)18 (200mm)22 (200mm)
24 (RB-50mm)18 (200mm)22 (200mm)
24 (RB-50mm)18 (200mm)22 (200mm)
24 (RB-50mm)
For General Structure Purpose
For General Structure Purpose
For General Structure Purpose
Rolled Steel For General Structure
For General Structure Purpose
- For thickness below
than 8mm, max width
is 1,524mm (5’); above
than 8mm, max width is
3,048mm (10’).
- For thickness more than
80mm can be supplied
without mill certificate.
- Max. length is 15,000mm.
However the final sizes are
subject to reconfirm by our
mill.
- Shotblasting and primer
shop are available, with
max. width 3,048mm (10’).
-
-
1XT/180o
2XT/180o
Bending
180o
1.5 x t
-
-
-
MILD STEEL PLATE
Flat Products | Steel Plate Flat Products | Steel Plate
0908
MILD STEEL PLATE
Specification GradeProduct
Thickness (mm) Thickness Range (mm)
ApplicationTensile Test Impact Test
Mechanical Properties
YS min. (N/mm2)
UTS (N/mm2)
E min. (%)
Average Temp. (Joule)
RemarksBend Test
6 - 150
6 - 150
6 - 150
6 - 120
6 - 120
6 - 120
S 235 JR+AR
S 235 JO + AR
S 235 J2+N
S 275 JR+AR
S 275 JO + AR
S 275 J2+N
EN 10025TH 2004
EN 10025TH 2004
≤ 16> 16 ≤ 40> 40 ≤ 63> 63 ≤ 80
> 80 ≤ 100> 100 ≤ 150
≤ 16> 16 ≤ 40> 40 ≤ 63> 63 ≤ 80
> 80 ≤ 100> 100 ≤ 150
≤ 16> 16 ≤ 40> 40 ≤ 63> 63 ≤ 80
> 80 ≤ 100> 100 ≤ 150
≤ 16> 16 ≤ 40> 40 ≤ 63> 63 ≤ 80
> 80 ≤ 100> 100 ≤ 150
≤ 16> 16 ≤ 40> 40 ≤ 63> 63 ≤ 80
> 80 ≤ 100> 100 ≤ 150
≤ 16> 16 ≤ 40> 40 ≤ 63> 63 ≤ 80
> 80 ≤ 100> 100 ≤ 150
235225215215215195235225215215215195235225215215215195275265255245235225275265255245235225275265255245235225
20 oC [27] (as per order)
0 oC [27]
-20 oC [27]
20 oC [27] (as per order)
0 oC [27]
-20 oC [27]
360 - 510
350 - 500
360 -510
350 - 500
360 - 510
350 - 500
410 - 560
400 - 540
410 - 560
400 - 540
410 - 560
400 - 540
24 (5.65VSo)24 (5.65VSo)23 (5.65VSo)22 (5.65VSo)22 (5.65VSo)22 (5.65VSo)24 (5.65VSo)24 (5.65VSo)23 (5.65VSo)22 (5.65VSo)22 (5.65VSo)22 (5.65VSo)24 (5.65VSo)24 (5.65VSo)23 (5.65VSo)22 (5.65VSo)22 (5.65VSo)22 (5.65VSo)21 (5.65VSo)21 (5.65VSo)20 (5.65VSo)19 (5.65VSo)19 (5.65VSo)19 (5.65VSo)21 (5.65VSo)21 (5.65VSo)20 (5.65VSo)19 (5.65VSo)19 (5.65VSo)19 (5.65VSo)21 (5.65VSo)21 (5.65VSo)20 (5.65VSo)19 (5.65VSo)19 (5.65VSo)19 (5.65VSo)
For General Structure Purpose
For General Structure Purpose
- For thickness below
than 8mm, max width
is 1,524mm (5’); above
than 8mm, max width is
3,048mm (10’).
- For thickness more than
80mm can be supplied
without mill certificate.
- Max. length is 15,000mm.
However the final sizes are
subject to reconfirm by our
mill.
- Shotblasting and primer
shop are available, with
max. width 3,048mm (10’).
-
-
-
-
-
-
Flat Products | Steel Plate Flat Products | Steel Plate
1110 Flat Products | Steel Plate Flat Products | Steel Plate
Specification GradeProduct
Thickness (mm) Thickness Range (mm)
ApplicationTensile Test Impact Test
Mechanical Properties
YS min. (N/mm2)
UTS (N/mm2)
E min. (%)
Average Temp. (Joule)
RemarksBend Test
6 - 80
6 - 40
6 - 15
B
C
D
ASTM A-283ASME SA-283
-
-
-
185
205
230
-
-
-
345 - 450
380 - 515
415 - 550
23 (200mm)26 (50mm)
20 (200mm)23 (50mm)
18 (200mm)21 (50mm)
For General Structure Purpose
- For thickness below than 8mm, max width is 1,524mm (5’); above than 8mm, max width is 3,048mm (10’).
- Max. length is 15,000mm. How-ever the final sizes are subject to reconfirm by our mill.
- Shotblasting and primer shop are available, with max. width 3,048mm (10’).
-
-
-
MILD STEEL PLATE
Specification GradeProduct
Thickness (mm) Thickness Range (mm)
ApplicationTR
Impact TestTensile Test
YS (N/mm2)Min.
UTS (N/mm2)Min. Max.
EL (%)5.65 √So
Average Temp. (Joule)
RemarksBend Test
min. 8mmmax. 80mm
S 355 NLEN 10025-3TH 2004
≤ 16> 16 ≤ 40> 40 ≤ 63> 63 ≤ 80
355345335325
470 630
22222221
-50o C [27]
NORMALIZED PRODUCT
Specification GradeProduct
Thickness (mm) Thickness Range (mm)
ApplicationTensile Test Impact Test
Mechanical Properties
YS min. (N/mm2)
UTS (N/mm2)
E min. (%)
Average Temp. (Joule)
RemarksBend Test
6 - 50
6 - 50
6 - 50
12.5 - 40
8 up to 80
8 up to 80
A
B
C
60
65
70
PRESSURE VESSEL
ASTM A-285ASME SA-285
ASTM A-516ASME SA 516
-
-
-
-
-
-
165
185
205
220
240
260
-
-
-
-
-
-
310 - 450
345 - 485
380 - 515
415 - 550
450 - 585
485 - 620
27 (200mm)30 (50mm)
25 (200mm)28 (50mm)
23 (200mm)27 (50mm)
21 (200mm)25 (50mm)
19 (200mm)23 (50mm)
17 (200mm)21 (50mm)
For Pressure Vessel Plate Carbon Steel
Low AQND Intermediate
Tensile Strength
For Pressure Vessel Plate Carbon Steel
Low AQND Intermediate
Tensile Strength
- For thickness below than 8mm, max width is 1,524mm (5’); above than 8mm, max width is 3,048mm (10’).
- Max. length is 15,000mm. However the final sizes are
subject to reconfirm by our mill.
- Shotblasting and primer shop are available, with max. width 3,048mm (10’).
- For thickness above than 40mm shall be Normalized Condition.
-
-
-
-
-
-
PRESSURE VESSEL
Boiler, Pressure Vessel,Disc End, Doft Frame
1110
SHIP BUILDING PLATE
Specification GradeProduct
Thickness (mm) Thickness Range (mm)
ApplicationTensile Test Impact Test
Mechanical Properties
YS min. (N/mm2)
UTS (N/mm2)
E min. (%)
Average Temp. (Joule)
RemarksBend Test
-50-50-50
8 - 508 - 508 - 508 - 308 - 308 - 30
-50-50-50
8 - 508 - 508 - 508 - 508 - 508 - 50- 40- 40
8 - 508 - 508 - 258 - 508 - 508 - 508 - 508 - 128 - 128 - 508 - 508 - 358 - 508 - 508 - 308 - 308 - 308 - 308 - 508 - 508 - 508 - 508 - 508 - 508 - 308 - 308 - 30
DAB
AH36DH36EH36AH40DH40EH40
AAB
AH36DH36EH36AH40DH40EH40
360 AR410 AR
ABD
AH32DH32AH36DH36AH40DH40
ABD
AH36DH36EH36AH40DH40EH40
ABD
AH36DH36EH36AH40DH40EH40
A.B.S.
B.K.I.
L.R.
G.L.
B.V.
D.N.V.
-----------------------------------------------
235235235355355355390390390235235235255355355390390390190215235235235315315355355390390235235235355355355390390390235235235355355355390390390
-20o [27]-
0o [27]0o [34]
-20o [34]-40o [34]0o [39]
-20o [39]-40o [39]
--
0o [27]0o [34]
-20o [34]-40o [34]0o [39]
-20o [39]-40o [39]
---
0o [27]-20o [27]0o [31]
-20o [31]0o [34]
-20o [34]0o [41]
-20o [41]-
-0o [27]-20o [27]0o [34]
-20o [34]-40o [34]0o [39]
-20o [39]-40o [39]
--0o [27]
-20o [27]0o [34]
-20o [34]-40o [34]0o [41]
-20o [41]-40o [41]
400 - 520400 - 520400 - 520490 - 620490 - 620490 - 620510 - 650510 - 650510 - 650400 - 520400 - 520400 - 520490 - 620490 - 620490 - 620510 - 650510 - 650510 - 650360 - 480410 - 530400 - 520400 - 520400 - 520440 - 570440 - 570490 - 630490 - 630510 - 660510 - 660400 - 520400 - 520400 - 520490 - 620490 - 620490 - 620510 - 660510 - 660510 - 660400 - 520400 - 520400 - 520490 - 620490 - 620490 - 620510 - 650510 - 650510 - 650
22 (5.65 VSo)22 (5.65 VSo)22 (5.65 VSo)21 (5.65 VSo)21 (5.65 VSo)21 (5.65 VSo)20 (5.65 VSo)20 (5.65 VSo)20 (5.65 VSo)22 (5.65 VSo)22 (5.65 VSo)22 (5.65 VSo)21 (5.65 VSo)21 (5.65 VSo)21 (5.65 VSo)20 (5.65 VSo)20 (5.65 VSo)20 (5.65 VSo)24 (5.65 VSo)22 (5.65 VSo)22 (5.65 VSo)22 (5.65 VSo)22 (5.65 VSo)22 (5.65 VSo)22 (5.65 VSo)21 (5.65 VSo)21 (5.65 VSo)20 (5.65 VSo)20 (5.65 VSo)22 (5.65 VSo)22 (5.65 VSo)22 (5.65 VSo)21 (5.65 VSo)21 (5.65 VSo)21 (5.65 VSo)20 (5.65 VSo)20 (5.65 VSo)20 (5.65 VSo)22 (5.65 VSo)22 (5.65 VSo)22 (5.65 VSo)21 (5.65 VSo)21 (5.65 VSo)21 (5.65 VSo)20 (5.65 VSo)20 (5.65 VSo)20 (5.65 VSo)
For thick up to 25 mm, no impact test
for grade B only
Steel Plates For Use in Ship Construction
Steel Plates For Use in Ship Construction
For thick up to 25 mm, no impact test
for grade B only
Steel Plates For Use in Ship Construction
For thick up to 25 mm, no impact test
for grade B only
Steel Plates For Use in Ship Construction
For thick up to 25 mm, no impact test
for grade B only
Steel Plates For Use in Ship Construction
For thick up to 25 mm, no impact test
for grade B only
Steel Plates For Use in Ship Construction
- For thickness below than 8mm, max width is 1,524mm (5’); above than 8mm, max width is 3,048mm (10’).
- Max. length is 15,000mm. However the final sizes are subject to reconfirm by our mill.
- Shotblasting and primer shop are available, with max. width 3,048mm (10’).
-----------------------------------------------
Flat Products | Steel Plate Flat Products | Steel Plate
1312
Specification GradeProduct
Thickness (mm) Thickness Range (mm)
ApplicationTensile Test Impact Test
Mechanical Properties
YS min. (N/mm2)
UTS (N/mm2)
E min. (%)
Average Temp. (Joule)
RemarksBend Test
6 - 80
6 - 80
6 - 80
6 - 40
6 - 40
6 - 40
6 - 80
6 - 80
6 - 80
6 - 80
6 - 80
6 - 80
42
50
55
58
65
70
43 D
50 A
50 B
50 C
50 D
350
ASTM A 572
ASTM A 573
BS 4360
AS 3678
-
-
-
-
-
-
≤ 16> 16 ≤ 40> 40 ≤ 63
> 63 ≤ 100≤ 16
> 16 ≤ 40> 40 ≤ 63
> 63 ≤ 100≤ 16
> 16 ≤ 40> 40 ≤ 63
> 63 ≤ 100≤ 16
> 16 ≤ 40> 40 ≤ 63> 63 ≤ 80
≤ 16> 16 ≤ 40> 40 ≤ 63
> 63 ≤ 100≤ 12
> 12 ≤ 20> 20
290
345
380
220
240
290
275265255245355345340325355345340325355345340325355345340325360350340
-
-
-
-
-
-
-20 oC [27]
-
20 oC [27](as per order)
0 oC [27]
-20 oC [27]
-
415 min
450 min
485 min
400 - 490
450 - 530
485 - 620
430 - 580
490 - 640
480 - 640
490 - 640
480 - 640
490 - 640
480 - 640
490 - 640
480 - 640
450 min
18 (200mm)22 (50mm)
16 (200mm)19 (50mm)
15 (200mm)18 (50mm)
19 (200mm)22 (50mm)
18 (200mm)21 (50mm)
16 (200mm)19 (50mm)
20 (200mm)16 (200mm) for
thick up to 9 mm
18 (200mm)15 (200mm) for
thick up to 9 mm
18 (200mm)15 (200mm) for
thick up to 9 mm
18 (200mm)15 (200mm) for
thick up to 9 mm
18 (200mm)15 (200mm) for
thick up to 9 mm
20 (5.65VSo)
For Welded Construction With Improved Notch
Tughness
This Specification Covers Structural Quality Carbon-Manganese-Silicone Steel
Plate Where Improved Notch Toughness is
Important
General Structure With Superior Weldability
General Structure With Superior Weldability
- For thickness below than 8mm, max width is 1,524mm (5’); above than 8mm, max width is 3,048mm (10’).
- Max. length is 15,000mm. However the final sizes are subject to reconfirm by our mill.
- Shotblasting and primer shop are available, with max. width 3,048mm (10’).
-
-
-
-
-
-
-
-
-
-
-
-
HIGH STRENGTH LOW ALLOY
Flat Products | Steel Plate Flat Products | Steel Plate
1312 Flat Products | Steel Plate Flat Products | Steel Plate
HIGH TENSILE PLATE
Specification GradeProduct
Thickness (mm) Thickness Range (mm)
ApplicationTensile Test Impact Test
Mechanical Properties
YS min. (N/mm2)
UTS (N/mm2)
E min. (%)
Average Temp. (Joule)
RemarksBend Test
6 - 80
6 - 80
6 - 80
6 - 80
6 - 80
6 - 80
6 - 120
6 - 120
6 - 120
6 - 120
8 - 80
≤ 20
SM 490 A
SM 490 B
SM 490 C
SM 490 YA
SM 490 YB
ST 52.3
S 355 JR+AR
S 355 JO+AR
S 355 J2+N
S 355 K2+N
SS - 490
SS - 540
JIS G 3106
DIN 17100
EN 10025TH 2004
JIS G 3101
≤ 16> 16 ≤ 40
> 40 ≤ 100≤ 16
> 16 ≤ 40> 40 ≤ 100
≤ 16> 16 ≤ 40
> 40 ≤ 100≤ 16
> 16 ≤ 40> 40 ≤ 75
> 75 ≤ 100 ≤ 16
> 16 ≤ 40> 40 ≤ 75
> 75 ≤ 100≤ 16
> 16 ≤ 40> 40≤ 16
> 16 ≤ 40> 40 ≤ 63> 63 ≤ 80
> 80 ≤ 100> 100 ≤ 150
≤ 16> 16 ≤ 40> 40 ≤ 63> 63 ≤ 80
> 80 ≤ 100> 100 ≤ 150
≤ 16> 16 ≤ 40> 40 ≤ 63> 63 ≤ 80
> 80 ≤ 100> 100 ≤ 150
≤ 16> 16 ≤ 40> 40 ≤ 63> 63 ≤ 80
> 80 ≤ 100> 100 ≤ 150
≤ 5≤ 16
> 16 ≤ 40> 40≤ 5
≤ 16> 16 ≤ 40
> 40
325315295325315295325315295365355335325365355335325355345335355345335325315295355345335325315295355345335325315295355345335325315295285285275255
400
390-
-
0 oC [27]< 12 mm no impact test
0 oC [47]< 12 mm no impact test
-
0 oC [27]< 12 mm no impact test
0 oC [27]
20 oC [27](asper order)
0 oC [27]
-20 oC [27]
-20 oC [40]
-
-
490 - 610
490 - 610
490 - 610
490 - 610
490 - 610
510 - 608
470 - 630
450 - 600
470 - 630
450 - 600
470 - 630
450 - 600
470 - 630
450 - 600
490 - 610
min540
17 (200 mm)21 (200 mm)
23 (RB-50 mm)17 (200 mm)21 (200 mm)
23 (RB-50 mm)17 (200 mm)21 (200 mm)
23 (RB-50 mm)15 (200 mm)19 (200 mm)
21 (RB-50 mm)21 (RB-50 mm)15 (200 mm)19 (200 mm)
21 (RB-50 mm)21 (RB-50 mm)22 (200 mm)21 (200 mm)20 (200 mm)20 (5.65VSo)20 (5.65VSo)19 (5.65VSo)18 (5.65VSo)18 (5.65VSo)18 (5.65VSo)20 (5.65VSo)20 (5.65VSo)19 (5.65VSo)18 (5.65VSo)18 (5.65VSo)18 (5.65VSo)20 (5.65VSo)20 (5.65VSo)19 (5.65VSo)18 (5.65VSo)18 (5.65VSo)18 (5.65VSo)20 (5.65VSo)20 (5.65VSo)19 (5.65VSo)18 (5.65VSo)18 (5.65VSo)18 (5.65VSo)19 (50 mm)
15 (200 mm)19 (200 mm)
21 (RB-50 mm) 16 (50 mm)
13 (200 mm)17 (200 mm)
17 (RB-50 mm)
GENERAL STRUCTURE WITH
SUPERIOR WELDABILITY
GENERAL STRUCTURE WITH SUPERIOR
WELDABILITY
GENERAL STRUCTURE WITH
SUPERIOR WELDABILITY
-
- For thickness below than 8 mm, max. width is 1,524 mm (5’); above than 8 mm, max width is 3,048mm (10’).
- Max. length is 15,000 mm. However the final sizes are subject to reconfirm by our mill.
- Shotblasting and primer shop are available, with max. width 3,048 mm (10’).
-
-
-
-
-
2XT/180o
-
-
-
-
Bending
180o
2 x t
Bending
180o
2 x t
A widely used product under our production line is the Hot Rolled Coil. Our Hot Rolled Coil is produced from the best steel slabs we can source, where it is heated to over its recrystallization temperature and rolled into flat steel while it is still in this high temperature to right thickness size before it is rolled into coils.
To ensure better quality control during the rolling process, we use the upward coil-ing machine. This method give us the ability to ensure that both sides of the steel are carefully inspected to complied with our certified standard.
Our Hot Rolled Coils have been used a range applications such as, welded steel struc-tural beams, storage tanks, flanges, and welded pipe where strength is required.
Standard & Specification : ASTM A-36, ASTM A-572, JIS G 3101, JIS G 3131Available Size : Thickness 2mm - 20mm, Width 900mm - 1524mm, Maximum 25 MT/CoilAnnual Capacity : 900.000 MT/Year
Hot Rolled Coil
1514 Flat Products | Hot Rolled Coil Flat Products | Hot Rolled Coil
Specification GradeProduct Thick-
ness (mm)
Thickness Range (mm)
Bend TestImpact Test
Average Temp. (Joule)
Application Remarks
Tensile Test
YS Min. (N/mm2)
UTS (N/mm2) E Min. (%)
2 - 16
2 - 16
2 - 13
2 - 13
1.6 - 13
2 - 20
2 - 14
4 - 14
SPHC
SPHD
SPHT - 1
SPHT - 2
SPHT - 3
SS 400
S G 255
SAPH 400
(41)
SAPH 440
(45)
JIS G 3131
JIS G 3132
JIS G 3113
JIS G 3101
JIS G 3116
1.6 < 2
2 < 2.5
2.5 < 3.2
3.2 < 4
≥4
2 < 2.5
2.5 < 3.2
3.2 < 4
≥4
1.6 < 3
3 < 6
6 ≤ 13
1.6 < 3
3 < 6
6 ≤ 13
1.6 < 3
3 < 6
6 ≤ 13
≤ 5
> 5 ≤ 16
16 ≤ 40
2.5 < 3.15
3.15 < 4
4 < 6.3
≥ 6.3
4 < 6
6 < 6.3
6.3 < 8
≥ 8 < 14
-
-
-
-
-
245
235
255
255
235
305
295
295
275
-
-
-
-
-
-
-
-
-
270 min
270 min
270 min
340 min
410 min
400 - 510
400
400
440
29 (50mm)
29 (50mm)
29 (50mm)
31 (50mm)
31 (50mm)
33 (50mm)
35 (50mm)
37 (50mm)
39 (50mm)
32 (50mm)
35 (50mm)
37 (50mm)
27 (50mm)
30 (50mm)
32 (50mm)
22 (50mm)
25 (50mm)
27 (50mm)
21 (50mm)
17 (200mm)
21 (200mm)
28 (50mm)
34 (50mm)
35 (50mm)
36 (50mm)
24 (200mm)
34 (50mm)
34 (50mm)
22 (200mm)
22 (200mm)
Commercial
Quality Drawing
Purpose
Drawing Quality
Cold Rollable
Welded Steel
Pipes & Tubes
Welded Steel
Pipes & Tubes
Welded Steel
Pipes & Tubes
For General
Structure
For LPG Cylinder
Structure For
Automobile
Structure For
Automobile
For the width of
1524mm (5”) the
min. thickness is
5mm
flat on itself
0.5 x T
flat on itself
Over 3mm
0.5 x T
1.0 x T
Over 3mm
1.5 x T
1.5 x T
Over 3mm
2.0 x T
Bending
180o
1.5 x T
180o 1.0 x T
Bending
180o
1.0 x T
Bending
180o
1.5 x T
1514 Flat Products | Hot Rolled Coil Flat Products | Hot Rolled Coil
Specification GradeProduct Thick-
ness (mm)
Thickness Range (mm)
Bend TestImpact Test
Average Temp. (Joule)
Application Remarks
Tensile Test
YS Min. (N/mm2)
UTS (N/mm2)
E Min. (%)
4 - 20
5 - 20
2 - 20
4 - 12
4 - 12
4 - 16
5 - 16 5 - 16 5 - 16
5 - 16
5 - 16
5 - 16 5 - 16 5 - 16 5 - 16 5 - 16 5 - 16 5 - 16 5 -166 - 16 6 - 16
6 - 16
6 - 16 6 - 16
6 - 12
4 - 16
C C - A A A
42 50 55
70
ST 52.3
50 A 50 B 50 C 50 D
S 355 JR+AR S 355 JO+AR S 355 J2+NS 355 K2+N SM 490 A SM 490 B
SM 490 C
SM 490 YA SM 490 YB
S G 295
350
250
ASTM A283
ASTM A285
ASTM A 36
A. B. S.
B. K. I.
L. R.
ASTM A 572
ASTM A 516
DIN 17100
BS 4360
EN 10025TH 2004
JIS G 3106
JIS G 3116
AS 3678
- - - - - - - - - -
≤ 16
≤ 16 ≤ 16 ≤ 16 ≤ 16 ≤ 16 ≤ 16 ≤ 16 ≤ 16≤ 16 ≤ 16
≤ 16
≤ 16 ≤ 16
> 8 ≤ 12 > 8 ≤ 16 > 8 ≤ 12 > 8 ≤ 16
205
205
250
235
235
235
290 345 380
260
355
355 355 355 355 355 355 355 355325 325
325
365 365
295360 350 260 250
- - - -
0oC (27)
- -
0oC (27) -20oC (27) 20oC (27) 0oC (27)
-20oC (27) -20oC (40)
-
0oC (27)< 12mm, no impact test
0oC (47)< 12mm, no impact test
- 0oC (27)
< 12mm, no impact test
-- -
380 - 515
380 - 515
400 - 550
400 - 520
400 - 520
400 - 520
415 min 450 min 485 min
485 - 620
510 - 608
490 - 640 490 - 640 490 - 640 490 - 640 470 - 630 470 - 630 470 - 630 470 - 630490 - 610 490 - 610
490 - 610
490 - 610 490 - 610
440
450 min
410 min
20 (200mm) 23 (50mm)
23 (200mm) 27 (50mm)
18 (200mm) 21 (50mm)
22 (5.65 VSo)
22 (5.65 VSo)
22 (5.65 VSo)
18 (200mm) 16 (200mm) 15 (200mm)
17 (200mm) 21 (50mm) 22 (200mm)
18 (200mm) 18 (200mm) 18 (200mm) 18 (200mm) 20 (5.65 VSo) 20 (5.65 VSo) 20 (5.65 VSo) 20 (5.65 VSo)17 (200mm) 17 (200mm)
17 (200mm)
15 (200mm) 15 (200mm)
26 (50mm)
22 (200mm)
20 (200mm)
For Storage Tank of Low Temp. Use
For Storage Tank of Low Temp. Use
For General Struc-tural Application For Use In ShipConstruction
For Use In ShipConstruction
For Use In ShipConstruction
For Welded Construc-tion With Improved
Toughness For Pressure Vessel
Carbon Steel For
Moderate & Lower Temp.
Service With Improved
Notch Toughness
SuperiorWeldability
as per order
for S 355 JR+AR only
For LPG Cylinder
For the width of 1524mm (5”) the min. thickness is
5mm
- - - -
2XT/180o
- - - - - - - -- - - - -
180o /1.5XT- -
1716 Flat Products | Hot Rolled Coil Flat Products | Hot Rolled Coil
Specification GradeProduct Thick-
ness (mm)
Thickness Range (mm)
Bend TestImpact Test
Average Temp. (Joule)
Application Remarks
Tensile Test
YS Min. (N/mm2)
UTS (N/mm2)
E Min. (%)
4 - 16 4 - 16 4 - 16 4 - 16 4 - 16 4 - 16 4 - 16 4 - 16
4 - 20
4 - 20
4 - 20
4 - 20
4 - 20
4 - 20
4 - 20
40 A 40 B 40 C 40 D 43 A 43 B 43 C 43 D
ST 37.2
S 235 JR+AR
S 235 JO+AR
S 235 J2+N
S 275 JR+AR
S 275 JO+AR
S 275 J2+N
BS 4360
DIN 17100
EN 10025TH 2004
≤ 16 ≤ 16 ≤ 16 ≤ 16 ≤ 16 ≤ 16 ≤ 16 ≤ 16 ≤ 16
> 16 ≤ 40 > 40 ≤ 16
> 16 ≤ 40 ≤ 16
> 16 ≤ 40 ≤ 16
> 16 ≤ 40 ≤ 16
> 16 ≤ 40 ≤ 16
> 16 ≤ 40 ≤ 16
> 16 ≤ 40
235 235 235 235 275 275 275 275 235 225 225 235 225 235 225 235 225 275 265 275 265 275 265
20oC (27) (as per order)
0oC (27) -20oC (27)
20oC (27) (as per order)
0oC (27) -20oC (27)
20oC / 27
(as per order)
20o (27)(as per order)
0oC (27)
-20oC (27)
20oC / 27 (as per order)
0oC (27)
-20oC (27)
340 - 500 340 - 500 340 - 500 340 - 500 430 - 580 430 - 580 430 - 580 430 - 580
363 - 441
360 - 510
360 - 510
360 - 510
410 - 560
410 - 560
410 - 560
22 (200mm) 22 (200mm) 22 (200mm) 22 (200mm) 20 (200mm) 20 (200mm) 20 (200mm) 20 (200mm) 22 (200mm) 21 (200mm) 20 (200mm) 24 (5.65 VSo) 24 (5.65 VSo) 24 (5.65 VSo) 24 (5.65 VSo) 24 (5.65 VSo) 24 (5.65 VSo) 21 (5.65 VSo) 21 (5.65 VSo) 21 (5.65 VSo) 21 (5.65 VSo) 21 (5.65 VSo) 21 (5.65 VSo)
For General Structure Purpose
For General
Structure Purpose
For General Structure Purpose
For the width of 1524mm (5”) the min. thickness is
5mm
- - - - - - - -
1XT/180o
- - - - - -
1716 Flat Products | Hot Rolled Coil Flat Products | Hot Rolled Coil
Pickling treatment will removes most surface impurities from the steel surface with the use of chemicals, and is covered with a final layer of protective coatings. Our years of experience in handling and controlling the right amount of chemical used in this field of technology will ensure the treatment to produce a high degree of surface smoothness to the plate or coil products.
With our current technology, we are able to produce hot rolled products with the standard pickling treatment, and covered by a layer of oil based protective coating in the final process. This protective coating will assist in resisting against corrosion process during storage and transportation of the product, and can be applied either to our plate or coil products.
Standard & Specification : ASTM A-36, ASTM A-572, JIS G 3101, JIS G 3131Available Size : Thickness 1.5mm - 3mm, Width 700mm - 1000mm, Maximum 25 MT/CoilAnnual Capacity : 900.000 MT/Year
Hot Roll Pickled Oil (HRPO)
1918 Flat Products | Hot Roll Pickled Oil Flat Products | Cold Rolled Coil
At GRP we also produced our coil products in cold rolled form to cater to specific materials requirement for that unique product application.
This flat steel product rolled into thinner sizes while it is in normal room temperature to the exact thickness requirement and rolled into coils. The resulting of cold rolled coils is that they have a better surface quality, thinner profiles, and excellent finishes, and can be made into different type of products by means of cold forming.
Standard & Specification : JIS G 3141 spec 1B, JIS G 3141 spec SB, JIS G 3141 spec SD Available Size : Thickness 0.2mm - 1.5mm, Width 700mm - 1000mm, Maximum 762 MT/CoilAnnual Capacity : 900.000 MT/Year
Cold Roll Coil (CRC)
1918 Flat Products | Hot Roll Pickled Oil Flat Products | Cold Rolled Coil
2120
Functioned similar to the mass produced H and I beam, the welded beams are fabricated by welding together different plates to form a single beam of required size and shape. In order to achieve Engineering Optimization, Welded Beam serves as an alternative in construction Projects that require beams that are not available in standard hot rolled form.
Our welded beam products are SAW (Submerged Arc Welding). The process is closely supervised by our trained, qualified technicians and engineers, with hands on years of experience.The quality of the product is monitored at stages by an autonomous QA/QC Department.
At GRP, we produce Welded Beams in compliance with the JIS G 3192 standards. Our orders are tailor made as per customer’s request. Customer can choose speci-fication of Material, size of the beam and the welding/dimensional standard to be followed. Apart from Welded Beams, we also fabricate “T” Beams, King / Queen Cross, Box Beams, Box Girders and Runway Beams.
We have the unique facility to Tack Weld and Straighten Beams of Flange width up to 1,000mm and 60mm Thk, very rare to find with many other fabricators.
Standard & Specification : Supply various specification/international standard like JIS, ASTM , EN , BS, AS, ABS , etc.
Available Sizes : As per Customer Requirement.Annual Production Capacity : 36,000 to 50,000 MT/Year.
Welded beam
Flat Products | Welded Beam Flat Products | Welded Beam
2120
According JIS G 3192
NominalDimensional
mm
GeometricalMoment of Inertia
Ixcm4
Iycm4
Zxcm3
Zycm3
ixcm
iycm
Radius ofGyration of Area
Modulus ofSection
Standard Sectional DimensionInformative Reference
H x B
mm
SectionArea
A
mm2
UnitWeight
kg/mm2
t1
mm
t2
mm
r
mm
450 x 200
500 x 200
600 x 200
600 x 300
700 x 300
800 x 300
900 x 300
450 x 200
500 x 200
600 x 200
600 x 300
700 x 300
800 x 300
900 x 300
9
10
11
12
13
14
16
14
16
17
20
24
26
28
18
20
22
28
28
28
28
96.8
114.2
134.4
192.5
235.5
267.4
309.8
76.00
89.60
106.00
151.00
185.00
210.00
243.00
33,500
47,800
77,600
118,000
201,000
292,000
411,000
1,870
2,140
2,280
9,020
10,800
11,700
12,600
18.60
20.50
24.00
24.80
29.30
33.00
36.00
4.40
4.33
4.12
6.85
6.78
6.62
6.39
1,490.00
1,910.00
2,590.00
4,020.00
5,760.00
7,290.00
9,140.00
187.00
214.00
228.00
601.00
722.00
782.00
843.00
Flat Products | Welded Beam Flat Products | Welded Beam
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
With many different application and uses that can be achieved from using round pipe products, at GRP we manufactured our pipe from 1/4” to 6” OD in a of length 3500 mm to 1200 mm Electric Resistance Welding (ERW) methods.
As we strive to maintain to the highest standard quality, our ERW tubular pipe com-plied with different local and international standard specifications for its varying ap-plication requirements.
The surface finish for this product is available in bare or in coated form and the pro-cessing will be carried out in our facility. For the application carrying flow of water/liquid material, we can also perform hydrostatic testing on the products to ensure leakage-proof in its operations.
Standard & Specification : ASTM A 53 (A), BS 1387:1985 Heavy Series (H), Medium Series(M), Light series (L), BS EN 10255:2004 (E), JIS G 3444 STK 290, JIS G 3444 STK 400, JIS G 3445 STKM 11 A , STKM 12 A, JIS G 3452 SGP Black And Galvanized Pipe, JIS G 3454 STPG 370, SNI 07 - 0068 - 2007 PKB 30, SNI 07 - 0068 2007 PKB 41.Available Size : 1/4 inch OD to 6 inch OD (Outside Diameter)Annual Capacity : 72.000 MT/Year
Erw Pipe
2524 Tubular Products | ERW Pipe Tubular Products | ERW Pipe
ASTM A 53 (A)
20
25
32
40
50
65
80
100
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
26.7
33.4
42.2
48.3
60.3
73
88.9
114.3
2.87
3.38
3.56
3.68
3.91
5.16
3.18
3.96
4.78
5.49
3.18
3.96
4.78
5.56
6.02
40
40
40
40
40
40
-
-
-
40
-
-
-
-
40
700
700
1200
1200
2300
2500
1290
1600
1930
2220
1000
1250
1500
1750
1900
49
49
85
85
161
175
91
112
136
156
70
88
105
123
134
Nominal Size Test Pressure Chemical Composition
• Carbon (C) : 0.25 % max
• Phosphor (P) : 0.05 % max
• Sulphur (S) : 0.045 % max
Mechanical
• Tensile Strength : 330 N/mm2 min
• Yield Strength : 205 N/mm2 min
• Elongation : 22 % min
Tolerance
• Thickness : ± 12.5 %
• Length : ± 2 %
• Outside Diameter
OD ≤ 48.3 mm : ± 0.4 mm
OD ≥ 60.3 mm : ± 1 %
Standar length of Pipe : 6000 mm
Outside Diameter
(mm)
Thickness (mm)
Sch
DN Psi Kg/cm2NPS
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
2524 Tubular Products | ERW Pipe Tubular Products | ERW Pipe
BS 1387:1985 Heavy (H)
Medium (M)
Light (L)
Chemical Composition
• Carbon (C) : 0.20 % max
• Phosphor (P) : 0.045 % max
• Sulphur (S) : 0.045 % max
Mechanical Properties
• Tensile Strength : 320 - 460 N/mm2
• Yield Strength : 195 N/mm2 min
• Elongation : 20 %
Tolerance
• Thickness : + Not Specified
: - 8 % Light Tubes
- 10 % Medium and Heavy
• Length : ± 2 %
• Standard length of pipe : 6000 mm
50 65 80
100 125 150
2 2 1/2
3 4 5 6
60.8 76.6 89.5
114.9 140.6 166.1
59.8 75.4 88.1
113.3 138.7 164.1
4.5 4.5 5.0 5.4 5.4 5.4
730 730 730 730 730 730
50 50 50 50 50 50
Nominal Size Hydrostatic TestOutside Diameter Wall Thickness
T (mm)DN
(mm)Thread Size R
Max (mm)
Min (mm) Psi BAR
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
Nominal Size Hydrostatic TestOutside Diameter Wall Thickness
T (mm)DN
(mm)Thread Size R
Max (mm)
Min (mm) Psi BAR
20 25 32 40 50 65 80
100 125 150
3/4 1
1 1/4 1 1/2
2 2 1/2
3 4 5 6
27.2 34.2 42.9 48.8 60.8 76.6 89.5
114.9 140.6 166.1
26.6 33.4 42.1 48
59.8 75.4 88.1
113.3 138.7 164.1
2.6 3.2 3.2 3.2 3.6 3.6 4.0 4.5 5.0 5.0
730 730 730 730 730 730 730 730 730 730
50 50 50 50 50 50 50 50 50 50
Nominal Size Hydrostatic TestOutside Diameter Wall Thickness
T (mm)DN
(mm)Thread Size R
Max (mm)
Min (mm) Psi BAR
20 25 32 40 50 65 80
100
3/4 1
1 1/4 1 1/2
2 2 1/2
3 4
27.2 34.2 42.9 48.8 60.8 76.6 89.5
114.9
26.6 33.4 42.1 48
59.8 75.4 88.1
113.3
2.3 2.9 2.9 2.9 3.2 3.2 3.2 3.6
730 730 730 730 730 730 730 730
50 50 50 50 50 50 50 50
2726 Tubular Products | ERW Pipe Tubular Products | ERW Pipe
2726
BS EN 10255:2004 (E) Type L
20
25
32
40
50
65
80
100
125
150
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
6
26.9
33.7
42.4
48.3
60.3
76.1
88.9
114.3
139.7
165.1
27.3
34.2
42.9
48.8
60.8
76.6
89.5
115
140.8
166.5
26.5
33.3
42
47.9
59.7
75.3
88
113.1
138.5
163.9
2.3
2.9
2.9
2.9
3.2
3.2
3.2
3.6
4.5
4.5
730
730
730
730
730
730
730
730
730
730
50
50
50
50
50
50
50
50
50
50
Nominal Size Outside Diameter Hydrostatic TestSpecified Outside
Diameter (mm)
Wall Thickness
T (mm)DN
(mm)Max (mm)
Thread Size R
Min (mm) Psi BAR
Type L1
20
25
32
40
50
65
80
100
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
26.9
33.7
42.4
48.3
60.3
76.1
88.9
114.3
27.3
34.2
42.9
48.8
60.8
76.6
89.5
115
26.5
33.3
42
47.9
59.7
75.3
88
113.1
2.3
2.9
2.9
2.9
3.2
3.2
3.6
4.0
730
730
730
730
730
730
730
730
50
50
50
50
50
50
50
50
Nominal Size Outside Diameter Hydrostatic TestSpecified Outside
Diameter (mm)
Wall Thickness
T (mm)DN
(mm)Max (mm)
Thread Size R
Min (mm) Psi BAR
20
25
32
40
50
65
80
100
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
26.9
33.7
42.4
48.3
60.3
76.1
88.9
114.3
27.3
34.2
42.9
48.8
60.8
76.6
89.5
115
26.5
33.3
42
47.9
59.7
75.3
88
113.1
2.3
2.6
2.6
2.9
2.9
3.2
3.2
3.6
730
730
730
730
S
730
730
730
50
50
50
50
50
50
50
50
Nominal Size Outside Diameter Hydrostatic TestSpecified Outside
Diameter (mm)
Wall Thickness
T (mm)DN
(mm)Max (mm)
Thread Size R
Min (mm) Psi BAR
Type L2
Heavy Series (H)
50
65
80
100
125
150
2
2 1/2
3
4
5
6
60.3
76.1
88.9
114.3
139.7
165.1
60.8
76.6
89.5
115
140.8
166.5
59.7
75.3
88
113.1
138.5
163.9
4.5
4.5
5.0
5.4
5.4
5.4
730
730
730
730
730
730
50
50
50
50
50
50
Nominal Size Outside Diameter Hydrostatic TestSpecified Outside
Diameter (mm)
Wall Thickness
T (mm)DN
(mm)Max (mm)
Thread Size R
Min (mm) Psi BAR
Medium Series (M)
20
25
32
40
50
65
80
100
125
150
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
6
26.9
33.7
42.4
48.3
60.3
76.1
88.9
114.3
139.7
165.1
27.3
34.2
42.9
48.8
60.8
76.6
89.5
115
140.8
166.5
26.5
33.3
42
47.9
59.7
75.3
88
113.1
138.5
163.9
2.6
3.2
3.2
3.2
3.6
3.6
4.0
4.5
5.0
5.0
730
730
730
730
730
730
730
730
730
730
50
50
50
50
50
50
50
50
50
50
Nominal Size Outside Diameter Hydrostatic TestSpecified Outside
Diameter (mm)
Wall Thickness
T (mm)DN
(mm)Max (mm)
Thread Size R
Min (mm) Psi BAR
Tubular Products | ERW Pipe Tubular Products | ERW Pipe
Chemical Composition
• Carbon (C) : 0.20 % max
• Phosphor (P) : 0.035 % max
• Sulphur (S) : 0.03 % max
Mechanical Properties
• Tensile Strength : 320 - 520 N/mm2
• Yield Strength : 195 N/mm2 min
• Elongation : 20 %
Tolerance
• Thickness : ± 10 % Medium (M) & Heavy Series (H,L)
: + Not Specified
: - 8 % Type (L1, L2)
• Length : ± 2 %
• Standard length of pipe : 6000 mm
2928
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
JIS G 3444 STK 290
Nominal Size
A
Outside Diameter
(mm)
Thickness (mm)
Cross Sectional Area cm2
1.238
1.583
1.799
2.291
2.919
3.157
3.345
3.621
4.029
4.564
4.205
5.760
7.100
6.495
7.349
9.085
7.591
8.636
11.17
12.18
15.52
15.4
17.07
19.13
25.22
22.72
25.16
30.01
35.26
2.0
2.0
2.3
2.3
2.3
2.5
2.3
2.5
2.8
3.2
2.3
3.2
4.0
2.8
3.2
4.0
2.8
3.2
3.2
3.5
4.5
3.6
4.0
4.5
6.0
4.5
5.0
6.0
7.1
21.7
27.2
34
42.7
48.6
60.5
76.3
89.1
114.3
139.8
165.2
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
5”
6”
15
20
25
32
40
50
65
80
100
125
150
B
Chemical Composition
• Phosphor (P) : 0.05 % max
• Sulphur (S) : 0.05 % max
Mechanical Properties
• Tensile Strength : 294 N/mm2 min
• Yield Strength : -
• Elongation : 21 % min
Tolerance
• Thickness
Under 4 mm : + 0.6 mm
- 0.5 mm
4 mm or over, excl. 12 mm : + 15 %
- 12.5 %
• Length : ± 2 %
• Outside Diameter
OD ≤ 50 mm : ± 0.5 mm
OD ≥ 50 mm : ± 1 %
Standard length of pipe : 6000 mm
Tubular Products | ERW Pipe Tubular Products | ERW Pipe
2928
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
JIS G 3444 STK 400
Nominal Size
A
Outside Diameter
(mm)
Thickness (mm)
Cross Sectional Area cm2
4.029
4.564
5.760
6.495
7.349
7.591
8.636
11.17
12.18
15.4
17.07
19.13
25.22
22.72
25.16
30.01
35.26
2.8
3.2
3.2
2.8
3.2
2.8
3.2
3.2
3.5
3.6
4.0
4.5
6.0
4.5
5.0
6.0
7.1
48.6
60.5
76.3
89.1
114.3
139.8
165.2
1 1/2”
2”
2 1/2”
3”
4”
5”
6”
40
50
65
80
100
125
150
B
Chemical Composition
• Carbon (C) : 0.25 % max
• Phosphor (P) : 0.04 % max
• Sulphur (S) : 0.04 % max
Mechanical Properties
• Tensile Strength : 400 N/mm2 min
• Yield Strength : 235 N/mm2 min
• Elongation : 14 % min
Tolerance
• Thickness
Under 4 mm : + 0.6 mm
- 0.5 mm
4 mm or over, excl. 12 mm : + 15 %
- 12.5 %
• Length : ± 2 %
• Outside Diameter
OD ≤ 50 mm : ± 0.5 mm
OD ≥ 50 mm : ± 1 %
Standard length of pipe : 6000 mm
Tubular Products | ERW Pipe Tubular Products | ERW Pipe
3130
SNI 07 - 0068 - 2007 PKB 30
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
Nominal Size
A
Outside Diameter
(mm)
Thickness (mm)
Cross Sectional Area cm2
1.238
1.583
1.799
2.291
2.919
3.157
3.345
4.029
4.564
4.205
5.760
7.100
6.465
7.439
9.085
7.591
8.936
10.690
11.170
12.520
15.520
19.120
15.400
17.070
19.130
25.220
22.720
25.160
30.010
34.790
2.0
2.0
2.3
2.3
2.3
2.8
2.3
2.8
3.2
2.3
3.2
4.0
2.8
3.2
4.0
2.8
3.2
4.0
3.2
3.6
4.5
5.6
3.6
4.0
4.5
6.0
4.5
5.0
6.0
7.0
21.7
27.2
34
42.7
48.6
60.5
76.3
89.1
114.3
139.8
165.2
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
5”
6”
15
20
25
32
40
50
65
80
100
125
150
B
Chemical Composition
• Phosphor (P) : 0.05 % max
• Sulphur (S) : 0.05 % max
Mechanical Properties
• Tensile Strength : 294 N/mm2 min
• Yield Strength : -
• Elongation : 21 % min
Tolerance
• Thickness
< 4 mm : ± 0.6 mm
: - 0.5 mm
4 mm s/d 12 mm : + 15 %
: - 12.5 %
• Length : ± 2 %
• Outside Diameter
OD ≤ 50 mm : ± 0.5 mm
OD ≥ 50 mm : ± 1 %
Standard length of pipe : 6000 mm
Tubular Products | ERW Pipe Tubular Products | ERW Pipe
3130
SNI 07 - 0068 - 2007 PKB 41
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
Nominal Size
A
Outside Diameter
(mm)
Thickness (mm)
Cross Sectional Area cm2
3.510
4.029
4.564
4.205
5.760
6.465
7.349
7.591
8.936
11.170
12.520
15.400
17.070
19.130
23.600
22.720
25.160
30.010
34.790
2.8
2.8
3.2
2.3
3.2
2.8
3.2
2.8
3.2
3.2
3.6
3.6
4.0
4.5
6.0
4.5
5.0
6.0
7.0
42.7
48.6
60.5
76.3
89.1
114.3
139.8
165.2
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
5”
6”
32
40
50
65
80
100
125
150
B
Chemical Composition
• Carbon (C) : 0.25 % max
• Phosphor (P) : 0.04 % max
• Sulphur (S) : 0.04 % max
Mechanical Properties
• Tensile Strength : 402 N/mm2 min
• Yield Strength : 235 N/mm2 min
• Elongation : 14 % min
Tolerance
• Thickness
< 4 mm : + 0.6 mm
: - 0.5 mm
4 mm s/d 12 mm : + 15 %
: - 12.5 %
• Length : ± 2 %
• Outside Diameter
OD ≤ 50 mm : ± 0.5 mm
OD ≥ 50 mm : ± 1 %
Standard length of pipe : 6000 mm
Tubular Products | ERW Pipe Tubular Products | ERW Pipe
3332
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
Chemical Composition
• Phosphor (P) : 0.05 % max
• Sulphur (S) : 0.05 % max
Tolerance
• Thickness
< 4 mm : + 0.6 mm
: - 0.5 mm
4 mm s/d 12 mm : + 15 %
: - 12.5 %
• Length : ± 2 %
• Weight with zinc : 300 gr/m2
Standard length of pipe : 6000 mm
Mechanical Properties
• Tensile Strength : 33 Kgf/mm2 min
• Elongation : 20 % min
SNI - 07 - 0039 - 1987 (Medium) Galvanized Pipe
Nominal Size
A Max Psi
Outside Diameter (mm) Test PressureThickness (mm)
2.65
3.25
3.25
3.25
3.65
3.65
4.05
4.5
4.85
4.85
710
710
710
710
710
710
710
710
710
710
50
50
50
50
50
50
50
50
50
50
26.4
33.4
42.1
48.0
59.8
75.4
88.1
113.3
138.7
164.1
27.2
34.2
42.9
48.80
60.8
76.6
89.5
114.9
140.6
166.1
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
5”
6”
20
25
32
40
50
65
80
100
125
250
B Min Kgf/cm2
Chemical Composition
• Phosphor (P) : 0.04 % max
• Sulphur (S) : 0.04 % max
Mechanical Properties
• Tensile Strength : 294 N/mm2 min
• Elongation : 24 % min
Tolerance
• Thickness
< 4 mm : + 0.6 mm
: - 0.5 mm
4 mm s/d 12 mm : + 15 %
: - 12.5 %
• Length : ± 2 %
• Weight with zinc : 400 gr/m2
• Outside Diameter
OD ≤ 50 mm : ± 0.5 mm
OD ≥ 50 mm : ± 1 %
Standard length of pipe : 6000 mm
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
JIS G3452 SGP Black and Galvanized Pipe
Nominal Size
A Psi
Outside Diameter
(mm)
Test PressureThickness (mm)
2.8
3.2
3.5
3.5
3.8
4.2
4.2
4.5
4.5
5.0
365
365
365
365
365
365
365
365
365
365
25
25
25
25
25
25
25
25
25
25
27.2
34
42.7
48.6
60.5
76.3
89.1
114.3
139.8
165.2
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
5”
6”
20
25
32
40
50
65
80
100
125
150
B Kgf/cm2
Tubular Products | ERW Pipe Tubular Products | ERW Pipe
3332
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
JIS G 3454 STPG 370
Nominal Size
DN Bar
Outside Diameter
(mm)
Test PressureSch
Thickness (mm)
40
40
40
40
20
40
20
40
20
40
20
40
20
40
20
40
59
59
59
59
34
59
34
59
34
59
34
59
34
59
34
59
60
60
60
60
35
60
35
60
35
60
35
60
35
60
35
60
2.90
3.40
3.60
3.70
3.20
3.90
4.50
5.20
4.50
5.50
4.90
6.00
5.10
6.60
5.50
7.10
27.2
34
42.7
48.6
60.5
76.3
89.1
114.3
139.8
165.2
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
5”
6”
20
25
32
40
50
65
80
100
125
150
NPS Kgf/cm2
Chemical Composition
• Carbon (C) : 0.25 % max
• Phosphor (P) : 0.04 % max
• Sulphur (S) : 0.04 % max
Mechanical Properties
• Tensile Strength : 370 N/mm2 min
• Yield Strength : 215 N/mm2 min
• Elongation : 21 % min
Tolerance
• Thickness : ± 10mm
• Length : ± 2 %
• Outside Diameter
OD ≤ 34 mm : ± 0.5 mm
OD ≥ 42.7 mm : ± 1 %
Standard length of pipe : 6000 mm
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
Electrical Resistance Welded Furniture Pipe
ThicknessSize (Inch) OD (Outside Diameter)
1.0 ~ 2.0
1.0 ~ 2.0
1.0 ~ 2.0
1.0 ~ 2.5
1.0 ~ 3.0
1.0 ~ 3.0
2.0 ~ 3.0
15.8
19.1
22.2
25.4
31.8
38.1
50.8
5/8”
3/4”
7/8”
1”
1 1/4”
1 1/2”
2”
Chemical Composition
• Phosphor (P) : 0.05 % max
• Sulphur (S) : 0.05 % max
Mechanical Properties
• Tensile Strength : 294 N/mm2 min
• Elongation : 21 % min
Tolerance
• Thickness : ± 10 %
• Length : ± 2 %
• Outside Diameter
OD ≤ 50 mm : ± 0.5 mm
OD ≥ 50 mm : ± 1 %
Tubular Products | ERW Pipe Tubular Products | ERW Pipe
4134
Grade
Grade Tensile tests for the pipe with thickness less than 8 mm performed with stem test no. 12 or no. 5, the minimum elongation value can be calculated by reducing the elongation is a rate reduction of 1.5% per 1 mm.
If there is no specific agreement between the buyer and the manufacturer when the order is for outside diameter tolerance will be applied rule no. 1, and for wall thickness tolerance will be applied rule no. 1
Designation CMax
SiMax
MnMax
PMax
SMax
Flatning Test(D: Outside Diameter) Bending Angle Inside Radius
Tensile Test Bending Test
Mechanical Properties
Standard Tolerances
Division DivisionTolerances on Outside Diameter Tolerances on Wall Thickness
Chemical Composition %
Ts Min Ys Min El Min (%)
N/mm2 N/mm2 Test no 12 Test no 5
Grade 11
Grade 12
Grade 12
STKM 11 A
STKM 12 A
STKM 12 B
0.12
0.2
0.2
0.35
0.35
0.35
0.6
0.6
0.6
0.04
0.04
0.04
0.04
0.04
0.04
290
340
390
-
175
275
35
35
25
30
30
20
½ D
⅔ D
⅔ D
180o
90o
90o
4 D
6 D
6 D
A
A
B
JIS G 3445 Carbon Steel Tube For Machine Structural Purposes
No. 1
No. 2
No. 3
Under 50 mm
50 mm or over
Under 50 mm
50 mm or over
Under 25 mm
25 mm or over to and excl. 40 mm
40 mm or over to and excl. 50 mm
50 mm or over to and excl. 60 mm
60 mm or over to and excl. 70 mm
70 mm or over to and excl. 80 mm
80 mm or over to and excl. 90 mm
90 mm or over to and excl. 100 mm
100 mm or over
Tolerances length
± 0.5 mm
± 1 %
± 0.25 mm
± 0.5 %
± 0.12 mm
± 0.15 mm
± 0.18 mm
± 0.2 mm
± 0.23 mm
± 0.25 mm
± 0.3 mm
± 0.4 mm
± 0.5 mm
+ 0.6 mm
- 0.5 mm
+ 15 %
- 12.5 %
± 0.3 mm
± 10 %
± 0.15 mm
± 8 %
No. 1
No. 2
No. 3
Under 4 mm
4 mm or over
Under 3 mm
3 mm or over
Under 2 mm
2 mm or over
± 2 % (Length mm x 2%)
Tubular Products | ERW Pipe Tubular Products | ERW Pipe
The versatile spiral-welded steel pipes are popular among different applications in the oil & gas industries, building construction, and water/liquid distribution system. This type of pipe product is often used for foundation piling, liquid flow distribution system, and ports/jetty construction.
At GRP, we produced our pipe with the automatic double-side Submerged Arc Welding (S.A.W.) technology to ensure the great consistency of our welding and the quality of our final product.
For a specific work project, we are able produce the spiral-welded steel pipes to suit different thickness and the diameter of up to 64” OD. In addition, we are able to provide additional coating services with different type of material to the pipe depending on the project’s requirement.
Available Size : Ø 6.5” - Ø 120” (Outside Diameter)Annual Capacity : 48.000 MT/Year
Spiral Pipe
3736 Tubular Products | Spiral Pipe Tubular Products | Spiral Pipe
Standard Grade
USt 37 - 1
RSt 37 - 1
USt 37 - 2
RSt 37 - 2
St 37 - 3
USt 42 - 1
RSt 42 - 1
USt 42 - 2
RSt 42 - 2
St 52 - 3
320
360
430
....
....
....
GeneralApplication
GeneralApplication
DIN1626
BS3601
MainApplication
1
2
3
ASTMA 252
Piping
Standard Grade
ASTMA 283
ASTM A 570
ASTMA 572
C
D
30
33
36
40
45
50
42
50
60
ASTM A 36
Water & savage systems.
Optionally pipes maybe supplied
according to ASTM A 53,
A 135
AWWAC 200
MainApplication
Standard & Specification
Standard Grade
A 25 CI I
A25 CI II
A
B
X 42
X 46
X 52
X 56
X 60
X 65
X 70
X 80
EW/CW
EW/CW
NE/CE
NE/CE
NE/CE
NE
CE
NE
CE
NE/CE
NE/CE
NE/CE
NE/CE
NE/CE
High strength oil & gas pipelines, slurry
lines, refinery piping, etc.
notes:EW : electric weldedCW : continuous
weldedNE : non expandedCE : cold expanded
API 5L
MainApplication
Weight/M (Kg/M) = (OD-T) x T x 0.2466
OD = Outside Diameter (mm) T = Thickness (mm)
Not Available
3736 Tubular Products | Spiral Pipe Tubular Products | Spiral Pipe
Outside Diameter Thickness
inch mm 64 8 9 10 11 12 12.7 13 14 15 16 17 18 19 20 21
7
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
177.8
203.2
254.0
304.8
355.6
406.4
457.2
508
558.8
609.6
660.4
711.2
762
812.8
863.6
914.4
965.2
1016
1066.8
1117.6
1168.4
1219.2
1270
1320.8
1371.6
1422.4
1473.2
1524
1574.8
1625.6
17.14
19.65
24.66
29.67
34.68
39.69
44.70
49.71
54.73
59.74
64.75
69.76
74.77
79.78
84.79
89.80
94.81
99.82
104.83
109.85
114.86
119.87
124.88
129.89
134.90
139.91
144.92
149.93
154.94
159.95
25.42
29.18
36.69
44.21
51.73
59.24
66.76
74.28
81.79
89.31
96.83
104.34
111.86
119.37
126.89
134.41
141.92
149.44
156.96
164.47
171.99
179.51
187.02
194.54
202.05
209.57
217.09
224.60
232.12
239.64
33.50
38.51
48.53
58.55
68.57
78.60
88.62
98.64
108.66
118.68
128.71
138.73
148.75
158.77
168.79
178.81
188.84
198.86
208.88
218.90
228.92
238.95
248.97
258.99
269.01
279.03
289.05
299.08
309.10
319.12
37.46
43.10
54.38
65.65
76.92
88.20
99.47
110.75
122.02
133.30
144.57
155.85
167.12
178.40
189.67
200.94
212.22
223.49
234.77
246.04
257.32
268.59
279.87
291.14
302.42
313.69
324.96
336.24
347.51
358.79
41.38
47.64
60.17
72.70
85.22
97.75
110.28
122.81
135.33
147.86
160.39
172.92
185.44
197.97
210.50
223.03
235.55
248.08
260.61
273.13
285.66
298.19
310.72
323.24
335.77
348.30
360.83
373.35
385.88
398.41
45.25
52.14
65.92
79.70
93.48
107.26
121.04
134.82
148.60
162.38
176.16
189.94
203.72
217.50
231.28
245.06
258.84
272.62
286.40
300.18
313.96
327.74
341.52
355.30
369.08
382.86
396.64
410.42
424.20
437.98
49.06
56.58
71.61
86.65
101.68
116.71
131.74
146.78
161.81
176.84
191.87
206.91
221.94
236.97
252.01
267.04
282.07
297.10
312.14
327.17
342.20
357.23
372.27
387.30
402.33
417.37
432.40
447.43
462.46
477.50
51.71
59.66
75.57
91.48
107.39
123.30
139.21
155.12
171.03
186.94
202.85
218.76
234.67
250.58
266.49
282.40
298.31
314.22
330.13
346.03
361.94
377.85
393.76
409.67
425.58
441.49
457.40
473.31
489.22
505.13
52.83
60.97
77.26
93.55
109.83
126.12
142.40
158.69
174.97
191.26
207.54
223.83
240.11
256.40
272.69
288.97
305.26
321.54
337.83
354.11
370.40
386.68
402.97
419.25
435.54
451.83
468.11
484.40
500.68
516.97
56.55
65.32
82.86
100.40
117.93
135.47
153.01
170.55
188.09
205.62
223.16
240.70
258.24
275.78
293.32
310.85
328.39
345.93
363.47
381.01
398.55
416.08
433.62
451.16
468.70
486.24
503.77
521.31
538.85
556.39
60.22
69.62
88.41
107.20
125.99
144.78
163.57
182.36
201.15
219.94
238.73
257.52
276.32
295.11
313.90
332.69
351.48
370.27
389.06
407.85
426.64
445.43
464.22
483.02
501.81
520.60
539.39
558.18
576.97
595.76
63.84
73.86
93.91
113.95
133.99
154.04
174.08
194.12
214.17
234.21
254.25
274.30
294.34
314.39
334.43
354.47
374.52
394.56
414.60
434.65
454.69
474.73
494.78
514.82
534.87
554.91
574.95
595.00
615.04
635.08
67.41
78.06
99.36
120.65
141.95
163.24
184.54
205.84
227.13
248.43
269.73
291.02
312.32
333.62
354.91
376.21
397.50
418.80
440.10
461.39
482.69
503.99
525.28
546.58
567.88
589.17
610.47
631.76
653.06
674.36
70.93
82.21
104.76
127.30
149.85
172.40
194.95
217.50
240.05
262.60
285.15
307.70
330.25
352.80
375.34
397.89
420.44
442.99
465.54
488.09
510.64
533.19
555.74
578.29
600.84
623.39
645.93
668.48
691.03
713.58
77.83
90.35
115.41
140.46
165.52
190.57
215.63
240.68
265.74
290.79
315.85
340.90
365.95
391.01
416.06
441.12
466.17
491.23
516.28
541.34
566.39
591.45
616.50
641.55
666.61
691.66
716.72
741.77
766.83
791.88
74.40
86.31
110.11
133.91
157.71
181.51
205.31
229.12
252.92
276.72
300.52
324.32
348.13
371.93
395.73
419.53
443.33
467.13
490.94
514.74
538.54
562.34
586.14
609.95
633.75
657.55
681.35
705.15
728.95
752.76
81.20
94.35
120.66
146.97
173.28
199.58
225.89
252.20
278.51
304.81
331.12
357.43
383.73
410.04
436.35
462.66
488.96
515.27
541.58
567.89
594.19
620.50
646.81
673.11
699.42
725.73
752.04
778.34
804.65
830.96
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
Rectangular Pipe
Shaped to rectangular form, we produced this pipe using Electric Resistance Weld-ing autonomous machine. Using this machine we are able to make a consistent welding all along the pipe ensuring the quality of usage for our product.
This hollow pipe are very popular in the industrial production, as it is turned into mass produced products such as supermarket racks, container fabrication, auto fab-rication, motor cycles, furniture. It is also used in industrial applications such as scaf-folding, water systems, gas pipelines, liquid pipelines, equipment for oil refineries, and structural steel.
Square Pipe
Our square formed pipes also made by welding using Electric Resistance Welding methods, and are also machine weld to ensure welding quality consistency.
The square pipe is used in structural projects, shelves, benches, trailers, ornamen-tal purposes and other general purpose use. It is widely popular in structural proj-ect as this form of pipe is more efficient in comparison with round steel pipes, as it is easily welded than the angular round pipe.
Standard Dimentional Tolerances : JIS G 3466SNI 07 - 0068 - 2007 : PKP 30Standard Material : JIS G 3131 SPHC, SAE 1006/SAE 1008Available Size : 15mm X 30mm s/d 50mm X 100mmAnnual Capacity : 36.000 MT/Year
Rectangular Pipe
Square Pipe
3938 Tubular Products | Rectangular Pipe & Square Pipe Tubular Products | Rectangular Pipe & Square Pipe
Rectangular Pipe & Square Pipe
3938 Tubular Products | Rectangular Pipe & Square Pipe Tubular Products | Rectangular Pipe & Square Pipe
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
Rectangular Tube Pipe
Chemical Composition
• Phosphor (P) : 0.05 % max
• Sulphur (S) : 0.05 % max
Mechanical Properties
• Tensile Strength : 294 N/mm2 min
• Elongation : 21% min
Tolerance
• Thickness < 3 mm : ± 0.3 mm
3 mm s/d 12 mm : ± 10 %
• Length : ± 2 %
• Side Length < 100 mm : ± 1.5 mm
≥ 100 mm : ± 10 %
• Corner betwen two side : ± 1.5o
• Standard length of pipe : 6000 mm
Standard Dimensional Tolerance JIS G 3466
Size (mm)
Thickness (mm)
40 x 20
50 x 30
60 x 40
75 x 45
80 x 40
100 x 50
1.0 ~ 3.0
1.8 ~ 3.2
2.0 ~ 3.5
2.0 ~ 3.5
2.0 ~ 3.8
2.0 ~ 4.0
Size (mm)
Thickness (mm)
20 x 20
25 x 25
30 x 30
40 x 40
50 x 50
60 x 60
75 x 75
100 x 100
1.0 ~ 2.0
1.0 ~ 2.0
1.0 ~ 3.2
1.8 ~ 3.5
2.0 ~ 3.8
2.0 ~ 4.0
2.0 ~ 4.0
2.8 ~ 4.5
t
b
h
Sx
Square Tube Pipe
t
b
h
Sx
4140 Tubular Products | Rectangular Pipe & Square Pipe Tubular Products | Square Pipe
Size (mm)
Thickness (mm)
40 x 40
50 x 50
60 x 40
75 x 75
100 x 100
1.85
2.30
2.75
3.20
2.30
3.20
2.30
3.20
3.20
4.00
4.50
NOTE : Non standard sizes are available upon request and subject to minimum quantity.
Rectangular Tube Pipe
Chemical Composition
• Phosphor (P) : 0.05 % max
• Sulphur (S) : 0.05 % max
Mechanical Properties
• Tensile Strength : 294 N/mm2 min
• Elongation : 21% min
Tolerance
• Thickness < 3 mm : ± 0.3 mm
3 mm s/d 12 mm : ± 10 %
• Length : ± 2 %
• Side Length < 100 mm : ± 1.5 mm
≥ 100 mm : ± 10 %
• Corner betwen two side : ± 1.5o
• Standard length of pipe : 6000 mm
SNI 07 - 0068 - 2007 PKP 30
t
b
h
Sx
t
b
h
Sx
Square Tube Pipe
Size (mm)
Thickness (mm)
75 x 45
100 x 50
2.30
3.20
2.30
3.20
4140 Tubular Products | Rectangular Pipe & Square Pipe Tubular Products | Square Pipe
Forming Product
The angled bar produced here in GRP is made through forming process known as cold formed, as its shaped is made by bending the plate from continuous steel ribbon that have been slithered from flat steel rolls.
Our angled bar has been mainly used in the construction of light steel structure, which includes:
•Framesystemoffactorybuilding
•Thinwalledsteeltruss
•Grid&reticulatedshellstructure
•Rooftrusses
•Purlins&Girts
•Floorframing
•Benchframes
•Gates&Fences
•Scaffolds
•Ladders,handrails,shelvingframes
Standard Dimentional Tolerances : JIS G 3350.Standard Material : JIS 3131 SPHC, SAE 1006/1008Available Size : 50 x 50 x 5Standard Length : 6M
Angle (Cold Formed)
4342 Forming Products | Angle (Cold Formed) Forming Products | Angle (Cold Formed)
4342 Forming Products | Angle (Cold Formed) Forming Products | Angle (Cold Formed)
A
t
t
B
90o
Cy
Cx
ix
Sx
SC
Sy
V
V
U
Y
Y
X X
U
iy
iviu
Cy
Cx
ix
Sx
SC
Sy
V
V
U
Y
Y
X X
U
iy
iviu
Designation
Dimension Center of Grafity
mm cm
Secondary moment of Area
cm4
Radius of Gyration of Area
cm
Modulus of Section
cm3
Center of Shear
cm3tan
αA x B t Cx Cy ix iy iu iv ix iy iu iv Zx Zy Sx Sy
3155
3115
3113
3075
3035
3725
60 x 60
50 x 50
50 x 50
40 x 40
30 x 30
75 x 30
3.2
3.2
2.3
3.2
3.2
3.2
1.65
1.40
1.36
1.15
0.90
2.86
1.65
1.40
1.36
1.15
0.90
2.57
13.1
7.47
5.54
3.72
1.50
18.9
1.89
1.57
1.58
1.25
0.92
2.43
13.1
7.47
5.54
3.72
1.50
1.94
1.89
1.57
1.58
1.25
0.92
0.78
21.3
12.1
8.94
6.04
2.45
19.6
2.41
2.00
2.01
1.59
1.18
2.48
5.03
2.83
2.13
1.39
0.54
1.47
1.17
0.97
0.98
0.76
0.56
0.62
1.00
1.00
1.00
1.00
1.00
0.198
3.02
2.07
1.52
1.30
0.71
4.07
3.02
2.07
1.52
1.30
0.71
4.80
1.49
1.24
1.24
0.99
0.74
0.41
1.49
1.24
1.24
0.99
0.74
2.70
Steel Bridge Decking is used in new bridge construction or to rehabilitate existing structures. Steel decked bridges can be built in any weather conditions. AIL roll forms bridge decking is produced at a 25.4 mm (4 ¼”) depth using Grade 50 steel in either pre-galvanized or bare steel. If the latter is used, it can be prime painted.
Advantages : * Available pre-galvanized or bare steel * Can be built in any weather conditions * Affordable strengthening solution for existing bridges * Nests for economical shipping
Standard & Specification : ASTM A 572, JIS G 3101, JIS 3131, JIS G 3352Available Size : 4mm x 100mm x 442mm to 6mm x 100mm x 442mm
Bridge Deck
Bridge Deck
Length
7000
9000
ASTM A 572, JIS G 3101,
JIS 3131, JIS G 3352
Size Standard
4.0 x 100 x 442
4.5 x 100 x 442
6.0 x 100 x 442
4.0 x 100 x 442
4.5 x 100 x 442
6.0 x 100 x 4424544 Forming Products | Bridge Deck Forming Products | Floor Deck
31
55876
55 0.7
135o
135o 45
31146 146
The other deck products we produced is the Composite Steel Floor Deck has a ribbed profile with embossments designed to interlock with concrete slabs. This in-terlocking system creates creating a reinforced concrete slab that serves the dual purpose of permanent form and positive reinforcement.
Installation is fast, easy, and economical and it eliminates the need for temporary wood forming.
Standard & Specification : ASTM A 924Available Size : 0.7mm x 45mm x 876mm
Floor Deck
4544 Forming Products | Bridge Deck Forming Products | Floor Deck
Another product in our range is the Expanded Mesh. Expanded mesh is one continu-ous single sheet of mesh produced from a flat metal plate where it is sheared and stretched but is left intact at the ‘knuckles’. It is available in a variety of thicknesses with differing sizes and designs of the apertures. Additional feature is the provision of an excellent anti-slip surface. This makes the product suitable for ramps (e.g. inclined walkways adjacent to conveyors) platforms and stair treads. The open nature of the product provides good visibility through the mesh as well as the easy passage of air and sound whilst ensuring security and protection.
Standard & Specification : JIS G3351, JIS G 3131 & ASTM 830Available Size : 22mm x 57mm to 75mm x 200mmAnnual Capacity : 1.440 MT/Year
Expanded Mesh
4746 Forming Products | Expanded Mesh Forming Products | Expanded Mesh
Material : JIS G 3131/ASTM A 830Grade : SPHC/SAE 1006/1008Tolerance : According to JIS G 3351
Tolerance on SW +/- 5%Tolerance on LW +/- 2 mmTolerance on S + 25 mm, - 0 mmTolerance on L Value Given in JIS on Steel Sheet and PlateTolerance on T Value Given in JIS on Steel Sheet and PlateTolerance on Weight +/- 10 %Deflection 5 mm or less per 1000 mm and not more than 5 mm x (length mm/1000 mm) for overall length.
JIS G 3131 / ASTM A 830
Type
Dimension
SWM LWM T Width LP (S)
(mm) (mm) (mm) (mm) (mm) (mm)
Mesh Size Product Size
Expanded Ornamesh
Expanded Grid Mesh
Expanded Merapi Mesh
Expanded Deco Mesh
EOM 3035
EOM 3045
EGM 30080
EGM 50075
EGM 50105
EGM 50080
EGM 50110
EMM 50050
EMM 30050
EDM 30032
22
35
30
25
30
42
45
75
75
25
57
76
75
75
75
135
135
200
200
80
3.0
3.0
3.0
5.0
5.0
5.0
5.0
5.0
3.0
3.0
3.5
4.5
8.0
7.5
10.5
8.0
11.0
5.0
5.0
3.2
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
4746 Forming Products | Expanded Mesh Forming Products | Expanded Mesh
Our other line of products is the Lipped Channel. Our manufactured Lipped Chan-nel is a good alternative for the hot/cold rolled channels as it offers some advantages over them, such as, Reduced thickness, Saving in cost. Lipped channels are used in applications such as Steel structures, Conveyor Guides , Storage Systems, Support Systems, Electrical Applications, Pollution Control Equipments, and Architectural Applications.
Standard Dimensional Tolerance : JIS G 3350, ASTM 830 belum tersertifikasiStandard Material : JIS 3131 SPHC.SAE 1006/SAE 1008Available Size : CNP 100 x 50 x 2.0 to CNP 200 x 75 x 3.2Annual Capacity : 30.000 MT/Year
XX
ix
iy
CySx
S.C.
CySx
Y
Y
B
C
Ht
Lipped Channel
4948 Forming Products | Lipped Channel Forming Products | Lipped Channel
Dimension
H x B x C mm
Geometrical Moment of Inertia Modulus of Section
Informative Reference
Radius of GyrationSection
Area A
cm2
Unit Weight
Kg /m
Center of Grafity
Cy cm
Shear Center
Xo cm
Torsion Constant
J
cm4
Warping Constant
Cw cm6
t mm
Ix cm4
Iy cm4
Zx cm3
Zy cm3
rx cm
ry cm
2
2.3
2.5
2.8
3
3.2
2
2.3
2.5
2.8
3
3.2
2
2.3
2.5
2.8
3
3.2
2
2.3
2.5
2.8
3
3.2
2
2.3
2.5
2.8
3
3.2
C 100 x 50 x 20
C 125 x 50 x 20
C 150 x 50 x 20
C 150 x 65 x 20
C 200 x 75 x 20
4.54
5.17
5.59
6.2
6.61
7.01
5.04
5.75
6.21
6.9
7.36
7.81
5.54
6.32
6.84
7.6
8.11
8.61
6.14
7.01
7.59
8.44
9.01
9.57
7.54
8.62
9.34
10.4
11.11
11.81
3.56
4.06
4.39
4.87
5.19
5.5
3.95
4.51
4.88
5.42
5.78
6.13
4.35
4.96
5.37
5.97
6.37
6.76
4.82
5.5
5.96
6.63
7.07
7.51
5.92
6.77
7.33
8.17
8.72
9.27
71
81
87
95
101
106
120
136
147
162
172
181
185
210
226
250
265
280
218
248
267
295
314
332
467
531
573
636
676
716
17
19
20
22
23
24
18
21
22
24
25
27
19
22
23
26
27
28
36
41
44
48
51
54
56
64
68
75
80
84
14.3
16.1
17.3
19.1
20.2
21.3
19.3
21.8
23.5
25.9
27.5
29
24.7
28
30.2
33.3
35.4
37.4
29.1
33
35.6
39.4
41.8
44.2
46.7
53.1
57.3
63.6
67.6
71.6
5.4
6
6.5
7.1
7.4
7.8
5.5
6.2
6.6
7.2
7.6
8
5.6
6.3
6.8
7.4
7.8
8.2
8.3
9.4
10
11
11.6
12.2
10.6
12
12.9
14.2
15
15.8
3.97
3.95
3.94
3.92
3.91
3.9
4.89
4.87
4.86
4.84
4.83
4.82
5.79
5.77
5.75
5.73
5.72
5.71
8.3
9.4
10
11
11.6
12.2
10.6
12
12.9
14.2
15
15.8
1.93
1.92
1.9
1.89
1.88
1.87
1.91
1.89
1.88
1.86
1.85
1.84
1.87
1.86
1.85
1.83
1.82
1.81
2.43
2.42
2.41
2.39
2.38
2.37
2.73
2.72
2.71
2.69
2.68
2.67
1.87
1.86
1.86
1.86
1.86
1.86
1.69
1.69
1.69
1.69
1.69
1.69
1.55
1.55
1.55
1.55
1.54
1.54
2.12
2.12
2.12
2.12
2.11
2.11
2.2
2.2
2.2
2.2
2.19
2.19
4.48
4.46
4.45
4.42
4.41
4.4
4.15
4.12
4.11
4.08
4.07
4.05
3.86
3.84
3.82
3.8
3.78
3.77
5.19
5.16
5.15
5.13
5.11
5.09
5.49
5.47
5.45
5.42
5.41
5.39
605
912
1164
1621
1982
2392
672
1013
1295
1804
2207
2665
738
1115
1425
1987
2432
2938
818
1236
1581
2207
2702
3265
1005
1520
1946
2719
3332
4030
444
496
528
574
603
630
675
755
805
877
922
965
971
1088
1162
1267
1334
1398
1784
2006
2148
2352
2482
2608
4571
5159
6637
6085
6437
6779
Material : JIS G 3131 / ASTM 830, Symbol : SPHC/ SAE 1006/ SAE 1008Standard length : 6 Meters, Dimention Tolerance : JIS G 3350
Technical Specification Non standard length is available on request subject to minimum quantity.We provide additional services for standard drilling and punching.Shotblasting, painting and galvanizing are available on request.
4948 Forming Products | Lipped Channel Forming Products | Lipped Channel
To provide an increase variety of products under our range, we also produce roof and wall sheeting. This Roof and wall sheeting are popular on virtually all types of buildings due to its weathertightness, durability, and design flexibility, energy efficient, cost effective, and allow for thermal movement. Our roof and wall sheeting come in a variety of profiles, material, and finishes. These panels are ideal to be on industrial plants, manufacturing plants, warehouses, and a variety of other applications and can be used as either a roofing panel or a siding panel.
Standard & Specification : Material SGCC Z 22 / AS1397 G300 & G550Available Size : R 700 x 0.4 to R 945 x 0.55 R 950 x 0.4 to R 950 x 0.55 W 950 x 0.4 to W 950 x 0.55
Roof & Wall Sheeting
5150 Forming Products | Roof & Wallsheeting Forming Products | Roof & Wall Sheeting
JIS G 3302
Type
mm Kg/m2 Kg/m2Kg/m1 Kg/m1mm
Zincalume
Panel Thickness
Panel Thickness
Weight Weight
Colorbond
0.4
0.45
0.5
0.55
0.4
0.45
0.5
0.55
0.4
0.45
0.5
0.55
0.4
0.45
0.5
0.55
3.31
3.7
4.1
4.49
3.31
3.7
4.1
4.49
3.31
3.7
4.1
4.49
3.31
3.7
4.1
4.49
3.03
3.38
3.75
4.1
3.97
4.44
4.92
5.39
3.97
4.44
4.92
5.39
3.97
4.44
4.92
5.39
0.4
0.45
0.5
0.5
0.4
0.45
0.5
0.55
0.4
0.45
0.5
0.55
0.4
0.45
0.5
0.55
3.37
3.76
4.16
4.55
3.37
3.76
4.16
4.55
3.37
3.76
4.16
4.55
4.75
5.25
5.76
6.24
3.08
3.44
3.8
4.16
4.04
4.51
4.99
5.46
4.04
4.51
4.99
5.46
4.04
4.51
4.99
5.46
R 700
(Roof)
R 945
(Roof)
R 950
(Roof)
W 950
(Wall)
Note : Width tolerance = ± 15mm Thickness tolerance = ± 0.05mm Length tolerance = - 0.0mm & + 45mm (Max. tolerance value is for 6m or over specified length). Also available product accesories : Caping, Flashing & Trim, Gutter & Downspout.
5150 Forming Products | Roof & Wallsheeting Forming Products | Roof & Wall Sheeting
5554
In support to the building and construction industry, we also produce Wire Rod. Wire Rod is a rolled steel product, produced from a billet and having a round, rect-angular or other cross-section. Particularly fine cross-section may be achieved by subsequent cold forming (drawing). Wire rod is used for many different products. Depending upon how it is cold formed and heat treated, wire is used, for example, to produce not only wire ropes, barbed wire, wire mesh and nails, but also springs, welded wire mesh and reinforcement wire. Our wire diameters ranging from 5.5mm to 13mm (rod) and 14mm to 40mm (bar in coil)
Standard & Specification : JIS G 3505AvailableSize :Barincoil :14mm–40mm WireRod :5.5mm–13mm DeformedBar :13mm–51mm RoundBar :10mm–50mmAnnual Capacity : 300.000 MT/Year
Wire Rod
We also produce half sizes like 6.5 ; 7.5 ; 8.5 ; 9.5 ; 10.5 ; 11.5 ; 12.5 mm
Nominal
Diameter(mm)
Out of Round(mm)
Tolerance ToleranceCode
WR 5.5WR 5.8WR 6.4WR 7.4WR 8.4WR 9.4
WR 10.4WR 11.0WR 12.0WR 13.0
5.5 5.8 6.4 7.4 8.4 9.4
10.411.0 12.0 13.0
± 0.5± 0.5± 0.5± 0.5± 0.5± 0.5± 0.5± 0.5± 0.5± 0.5
0.64 max0.64 max0.64 max0.64 max0.64 max0.64 max0.64 max0.64 max0.64 max0.64 max
LOW CARBON STEEL WIRE RODS
Nominal
Diameter(mm)
Out of Round(mm)
Tolerance ToleranceCode
BIC 14BIC 17BIC 19BIC 20BIC 22BIC 25BIC 28BIC 40
6.4 7.4 8.4 9.4
10.411.0 12.0 13.0
± 0.5± 0.5± 0.5± 0.5± 0.5± 0.5± 0.5± 0.5
0.64 max0.64 max0.64 max0.64 max0.64 max0.64 max0.64 max0.64 max
BAR IN COIL (WIRE ROD)
Bar & Wire Products | Wire Rod Bar & Wire Products | Annealed Wire
We can also deliver wire rods in equivalent grades.
Chemical Composition %
CClass
Mn P S
SWRM 06
SWRM 08
SWRM 10
SWRM 15
SWRM 20
0.08 max
0.10 MAX
0.08 to 0.13
0.13 to 0.18
0.18 to 0.23
0.60 max
0.60 max
0.30 to 0.60
0.30 to 0.60
0.30 to 0.60
0.045 max
0.045 max
0.045 max
0.045 max
0.045 max
0.045 max
0.045 max
0.045 max
0.045 max
0.045 max
CHEMICAL COMPOSITION
Another variation to our wire products is the Annealed Wire. Annealed Wire is ob-tained by means of thermal annealing, endowing it with the properties it needs for its main use - setting. Soft annealed wire offers excellent flexibility and softness through the process of oxygen free annealing. This wire is deployed both in civil construction and in agriculture. Hence, in civil construction annealed wire, also known as “burnt wire” is used for iron setting, tie wire or baling wire in building, parks and daily binding.
Standard & Specification : JIS G 3532Available Size : Diameter 0.8mm - 3mmAnnual Capacity : 3.600 MT/Year
Annealed Wire
Refer to JIS G3532 - SWMA / SNI 07-0040-2006 Bj K.L
1
2
3
4
AW 0.80
AW 0.90
AW 2.00
AW 3.00
0.80
0.90
2.00
3.00
± 0.04
± 0.04
± 0.06
± 0.06
-
-
260 - 590
260 - 590
-
-
55
36
No. ProductNominal Diameter
(mm)
Tensile Strength
(N/mm2)
Torsion
(Nr)
Tol. Ø
(mm)
5554 Bar & Wire Products | Wire Rod Bar & Wire Products | Annealed Wire
Our galvanized wire are made from high grade billets and processed with advanced processing technology and it comes in Low Carbon Light Coating (LLC) and Low Carbon Heavy Coating (LHC) variant. Various diameter and zinc coating gramature can be set to suit the uses in for communication devices, medical treatment equip-ment, weaving of wire mesh, making of brushes, steel rope, filter wire mesh, high pressure pipes, construction, arts and crafts, etc.
Standard & Specification : JIS G 3547Available Size : Ø 1.6mm - Ø 4.27mmAnnual Capacity : 42.000 MT/Year
Galvanized Wire
5756 Bar & Wire Products | Galvanized Wire Bar & Wire Products | Galvanized Wire
Low Carbon Light Coating (LLC) Refer to JIS G3547 - SWMGS2 / SNI 07-0040-2006 Bj KS
Ø Kawat
Zinc Coating (min)
Elongasi (min)
Tensile Strength
Adhesion Test
mm
Gr/m2
%
(N/mm2)
xD
4.11 - 4.27
50
10
290 - 540
2D
3.32 - 3.48
50
10
290 - 540
2D
2.70 - 2.84
50
10
290 - 540
2D
2.04 - 2.18
50
10
290 - 540
2D
1.60 - 1.70
50
10
290 - 540
2D
Sifat Mekanis SatuanLLC-8
(4.19 mm)
LLC-10
(3.40 mm)
LLC-12
(2.77 mm)
LLC-14
(2.11 mm)
LLC-16
(1.65 mm)
Low Carbon heavyCoating (LHC) Refer to BS 443-1982 / SNI 03-6154-1999
Ø Kawat
Zinc Coating (min)
Uniformity
Torsion (min)
Tensile Strength
Adhesion Test
mm
Gr/m2
Nr
(N/mm2)
xD
3.92 - 4.08
290
1’/3X + ½’ 1X
21
402 - 520
5D
3.84 - 3.52
275
1’/3X + ½’ 1X
26
402 - 520
4D
2.88 - 3.12
275
1’/3X + ½’ 1X
26
402 - 520
4D
2.59 - 2.81
260
1’/3X + ½’ 1X
28
402 - 520
4D
2.12 - 2.28
240
1’/3X
38
402 - 520
4D
1.92 - 2.08
240
1’/3X
38
402 - 520
4D
Sifat Mekanis SatuanLHC
4.00 mm
LHC
3.40 mm
LHC
3.00 mm
LHC
2.70 mm
LHC
2.20 mm
LHC
2.00 mm
5756 Bar & Wire Products | Galvanized Wire Bar & Wire Products | Galvanized Wire
Made from high grade billets and processed with an advanced processing technology, our nail wires have excellent corrosion resistance, excellent heading & forming ability with low work hardening quality. Various range of diameter and tensile strength are available for making any kind of common nails that suits your needs.
Standard & Specification : JIS A 5508, JIS G 3505 & SNI 05-0323-1999Available Size : Length 33mm - 125mm, Shank 2.15mm - 5.20mm, Head 5.1mm - 10.3mmAnnual Capacity : 14.400 MT/Year
Nail Wire
Refer to JIS G3532 - SWMB & SWMN / SNI 07-0040-2006 Bj K.B & Bj K.P
123456789
RDW - 6RDW - 7RDW - 8RDW - 9
RDW - 10RDW - 11RDW - 12RDW - 13RDW - 14
5.164.574.193.763.403.052.772.412.11
460 - 610540 - 790600 - 860640 - 880680 - 920700 - 960720 - 980
780 - 1000820 - 1100
Refer to JIS G3532 - 2000 type : - SWMB : Drawn steel wire is applicated for general purposed- SWMN : Drawn steel wire is applicated for nail product
Refer to SNI 07-0040-2006 type :- Bj K.B : Cooled drawn steel wire is applicated for general purposed- Bj K.P : Cooled drawn steel wire is applicated for nail product
± 0.05± 0.05± 0.05± 0.05± 0.04± 0.04± 0.04± 0.04± 0.04
No. Product Nominal Diameter ApplicationTol. Ø
(mm)
Tensile Strength
(N/mm2)
5958 Bar & Wire Products | Nail Wire Bar & Wire Products | Nails
The Smallest of building components, A nail consists of a metal rod or shank, pointed at one end and usually having a formed head at the other, that can be hammered into pieces of wood or other materials to fasten them together. Our nails are made from our own produced nail wire, ensuring the quality is maintained. It comes with 2.03mm to 5.29mm diameter and 36.8mm to 130.4mm long.
Standard & Specification : JIS A 5508, JIS G 3505 & SNI 05-0323-1999Available Size : Length 33mm - 125mm, Shank 2.15mm - 5.20mm, Head 5.1mm - 10.3mmAnnual Capacity : 5.400 MT/Year
Nails
Refer to JIS A5508 TYPE N-FC-SM
1234567
PKU 1½”PKU 2”
PKU 2½”PKU 3”
PKU 3½”PKU 4”PKU 5”
3850657590
100125
± 2.0± 2.5± 3.0± 3.5± 4.0± 4.5± 5.0
2.152.753.053.403.754.205.20
± 0.06± 0.06± 0.08± 0.08± 0.08± 0.10± 0.10
± 1200
± 1200
± 1200
± 1200
± 1200
± 1200
± 1200
1.7 - 4.32.2 - 5.52.4 - 6.12.7 - 6.83.0 - 7.53.4 - 8.43.7 - 9.2
5.16.67.37.98.89.8
10.3
No. Type
Length Shank Head
NominalLength(mm)
Lengthof point
(mm)Tolerance
(mm)Tolerance
(mm)AngleØ
(mm)Ø
(mm)
5958 Bar & Wire Products | Nail Wire Bar & Wire Products | Nails
As the main building materials in many construction work, our round and deformed bar range will assist any construction and engineering project with the product quality assurance of GRP. Round / deformed bar also commonly known as Steel Reinforcing bars are produced by pouring molten steel into casters and then running it through a series of stands in the mill, which shape the steel into reinforcing bars. The cross hatchings, called “deformations,” help transfer the load between concrete and steel.For buildings, bridges, highways and runways, the cast-in-place concrete “body” and shop-fabricated steel “musculature” of reinforcing bar will work in tandem to create one of the most durable and most economical composite materials.
Standard & Specification : JIS G 3112, JIS G 3191Available Size : Round Bar; Diameter 10mm - 50mm, Deformed Bar; Diameter 10mm - 32mmAnnual Capacity : 200.000 MT/Year
Round & Deformed Bar
6160 Bar & Wire Products | Round & Deformed Bar Bar & Wire Products | Round & Deformed Bar
ROUND BAR/PLAIN BAR/BETON POLOS - ACCORDING TO JIS 3112
RB 10
RB 12
RB 14
RB 16
RB 19
RB 22
RB 25
RB 28
RB 32
RB 50
Code
10
12
14
16
19
22
25
28
32
50
± 0.4
± 0.4
± 0.4
± 0.5
± 0.5
± 0.5
± 0.5
± 0.6
± 0.6
± 0.8
6 %
6 %
6 %
5 %
5 %
5 %
5 %
4 %
4 %
4 %
0.617
0.888
1.208
1.578
2.226
2.984
3.853
4.833
6.313
17.40
78.5
113.1
153.9
201.1
283.5
380.1
490.9
615.8
804.2
1963.5
Diameter(mm)
Weight(kg/mm)
Cross SectionLuas Penampang
Product Tolerance ToleranceNominal (mm2)
MECHANICAL PROPERTIES/SIFAT MEKANIS
Type
Round Bar
Round Bar
Deformed
Deformed
Deformed
SR 24
SS 400
SD 35
SD 40
SD 50
235
235
345
390
490
20
20
18
18
12
380
400
490
560
620
1800
1800
1800
1800
900
3 x d
3 x d
4 x d
5 x d
5 x d
Batas UlurYield Point
Kuat TarikTensile Point
RegangElongation
Bendability(Uji Lengkung)
Symbolof
Grade (min N/mm2) (% min)(min N/mm2) Angle Radius
DEFORMED BAR / BETON ULIR - ACCORDING TO JIS 3112
Code
DB 13
DB 16
DB 19
DB 22
DB 25
DB 29
DB 32
DB 36
DB 40
DB 51
13
16
19
22
25
29
32
36
40
51
± 0.4
± 0.5
± 0.5
± 0.5
± 0.5
± 0.6
± 0.6
± 0.6
± 0.8
± 0.8
6 %
6 %
6 %
5 %
5 %
5 %
5 %
4 %
4 %
4 %
1.04
1.58
2.23
2.98
3.85
5.18
6.31
7.99
9.07
16.04
132.7
201.1
283.5
380.1
490.9
662.5
804.2
1017.8
1256.6
2042.8
0.7
0.8
1.0
1.1
1.3
1.5
1.6
1.8
2.0
2.5
9.1 max
11.2 max
13.3 max
15.4 max
17.5 max
20.3 max
22.4 max
25.2 max
28.0 max
35.0 max
10.2 max
12.6 max
14.9 max
17.3 max
19.7 max
22.8 max
25.1 max
28.3 max
31.4 max
39.3 max
Diameter(mm)
Weight(kg/mm)
Cross SectionLuas Penampang
hTinggi Sirip
pJarak Sirip
bLebar Rusuk
Product Tolerance ToleranceNominal (mm2) (mm) (mm) (mm)
6160 Bar & Wire Products | Round & Deformed Bar Bar & Wire Products | Round & Deformed Bar
Sag rod is another downstream product we produce at GRP, as part of our extensive product lines. Sag rods are sometimes used in connection with purlins to take the component of the loads which is parallel to the roof. It is also can be used as a tie and (in most applications) capable of carrying tensile loads only.
Standard & Specification : JIS G 3112, JIS G 3191Available Size : Diameter 10mm - 25mmAnnual Capacity : 1.000 MT/Year
L
Ad
B B
Sagrod
6362 Bar & Wire Products | Sagrod Bar & Wire Products | Sagrod
MECHANICAL PROPERTIES/SIFAT MEKANIS
Type
mm mm mm mm mm mm mm
Size
Nuts Washer Size
Thickness(mm)
OutsiderDiameter
Outsiderof Hole
Thicknessmm
max max maxmin minminkg
WeightL A B
Diameterd
For Spanof Purlin/
Girt
SR-01-01
SR-01-02
SR-01-03
SR-01-04
SR-01-05
SR-01-06
SR-01-07
SR-01-08
SR-02-01
SR-02-02
SR-02-03
SR-02-04
SR-02-05
SR-02-06
SR-02-07
SR-02-08
12
16
12
16
10.0
13.0
9.64
12.57
26
32
13
17
3.6
5.0
2.8
4.0
1.421
1.332
1.243
1.154
1.066
0.977
0.533
0.444
2.525
2.367
2.209
2.051
1.894
1.736
0.947
0.789
1600
1500
1400
1300
1200
1100
600
500
1600
1500
1400
1300
1200
1100
600
500
1400
1300
1200
1100
1000
900
400
300
1400
1300
1200
1100
1000
900
400
300
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
1550
1450
1350
1250
1150
1050
550
450
1550
1450
1350
1250
1150
1050
550
450
1450
1350
1250
1150
1050
950
450
350
1450
1350
1250
1150
1050
950
450
350
Tolerance (mm)
Diameter
d
Total Length
L
Thread Length
B
± 0.5 ± 10 ± 2
NOTES :- Round Bar Material : - Grade SR 24 / JIS G 3112 - Tensile strength min. = 380 N/mm2
= 520 N/mm2
- Thread 1.75 P for Nuts size 12 2.0 P for Nuts size 16- Nut & Washer : Grade BS 4.6 (min)
6362 Bar & Wire Products | Sagrod Bar & Wire Products | Sagrod
Our pre-fabricated rebar mesh is made of high quality steel bar produced from our own quality steel and are welded together to form a pre-made mesh section. With different sizes, the pre-made section is leveled and flat with sturdy structure. De-pending on the size, our mesh section can be used for road construction, fences, racks, concrete walls and floors for factory and commercial buildings. It has been rust-proofed to stand against weather elements. Our mesh section can be supplied in rolls or panels.
Standard & Specification : JIS G 3551Available Size : Diameter; 4.8mm - 10.2mm Dimension; 5.4mtr x 2.1mtrAnnual Capacity : 13.200 MT/Year
Wire Mesh
Refer to JIS G3551 - WFR
Diameter
Weight/Unit Length
Tensile Strength
Yeild Strength
Elongation
mm
gr/m
N/mm2
N/mm2
%
6.80 - 7.20
285 - 319
min 490
min 400
min 8
7.80 - 8.20
375 - 415
min 490
min 400
min 8
8.80 - 9.20
477 - 522
min 490
min 400
min 8
9.80 - 10.20
592 - 641
min 490
min 400
min 8
4.80 - 5.20
142 - 167
min 490
min 400
min 8
5.80 - 6.20
207 - 237
min 490
min 400
min 8
A. Material / Ribs Wire
B. Product / Wire Mesh
Specification UnitsWMS
5WMG
5WMS
6WMG
6WMS
7WMS
8WMS
9WMS
10No.
1.
2.
3.
4.
5.
Type
Number of Line Wire
Number of Cross Wire
Pitch (Length x Width)
Dimension (Length x Width)
Packaging
unit
pcs
pcs
mm
M
units/pcg
sheet
15
36
5.4 x 2.1
25
sheet
15
36
5.4 x 2.1
25
sheet
15
36
150 x 150
5.4 x 2.1
20
sheet
15
36
150 x 150
5.4 x 2.1
20
sheet
15
36
150 x 150
5.4 x 2.1
15
sheet
15
36
150 x 150
5.4 x 2.1
15
roll
15
360
5.4 x 2.1
1
roll
15
360
5.4 x 2.1
1
1.
2.
3.
4.
5.
6.
150 x 150 150 x 150
6564 Bar & Wire Products | Wire Mesh Bar & Wire Products | Anchor Bolt
6564 Bar & Wire Products | Wire Mesh Bar & Wire Products | Anchor Bolt
An additional downstream product under our range is the anchor bolt. These anchor bolt are usually used and embedded in concrete and used to support structural steel columns, light poles, highway sign structures, bridge rail, equipment, and many other applications. Our Anchor bolt comes with 16mm, 19mm and 22mm.
Standard & Specification : JIS G 3112, JIS G 3191Available Size : Ø 12mm - Ø 25mmAnnual Capacity : 1.000 MT/Year
Anchor Bolt
DIMENSION PROPERTIES
Part Number Nut
mm
BarDiameter
(D)
mm
A
mm
C
mm
Radius(r)
mm
Total Length
mm
Vertical EmbedmentLength (Ld)
mm
TreadLength
(B)
STD-00-IAB016
STD-00-IAB019
STD-00-IAB022
16
19
22
560
675
755
100
125
125
100
120
130
25
25
50
460
550
630
630
765
840
M-16
M-20
M-22
Tolerances :
- Diameter (D) = ± 0.5
- A = ± 5
- B = ± 2
- C = ± 2
64
1. ENGINEERING SERVICE CENTER (ESC)
PRE-ENGINEERED BUILDING Our Pre-Engineered Building concept developed by PT. Gunung Garuda will produce steel ma-terial for building construction that is inexpensive, more efficient and faster on its implementa-tion, and improve the accuracy for the joining of the frame’s components.We recognize the difficulty in the pre-engineering phase to construct a building. In this phase it has traditionally involves different parties to design, draw, and fabricate the different steel components and steel joints that will form the frames of the building structure. With different parties involves in this process, it is possible that the resulting steel frames, steel joints or other components will not match upon installation.To address this, with PEB concept and the assistance of our ESC, we will assist in perform-ing all those work involved in this phase and to prepare all the steel frames and steel joining components at our facility, and to prepare this component materials ready for installation at the construction site, with improve joining accuracy.With our PEB concept and ESC expertise in steel engineering, we will create a completed building frame that is suitable to be implemented where steel materials are most needed for the construction project in a the most economical way.
Services
Services | Engineering Service Center72
Established in 1997, our Engineering Service Centre has been the trusted and dependable partner by our customers in its assistance in the consultation work for the engineering of steel structure for building’s frame. The services provided by this centre include drafting/technical drawing, modeling, and pre-fabrication of components structure to field construction of the building on the project site.Our Engineering Service Centre is equipped with the latest CNC machineries, digital 3D modeling, and supplied by first-rate material supplied by our Gunung Steel Group. Completed by staffs of top professional engineering team, our ESC will ensure our technical expertise and experience are able to respond to any engineering challenges presented to us. With years of experience in the steel engineering business, our Engineering Service Centre has successfully developed the Pre-Engineered Building (PEB) concept, for easier building development.
Drawing software used:•Design&Analysis:STAADIIIVer.22.3 •Detailing:X-SteelVer.5.4&SteelCADVer.4.1 •Nesting:BarNesting&AutoNesting
ESC annual production capacity:•Industrial&CommercialBuilding:approx.48,000MT•Bridge :approx.20,000MT•SteelTower :approx.18,000MT•GalvanizingFacility :approx.30,000MT
73Services | Plate Service Center
PSC has a modern fabrication shop, supported by the state of the art facility can fabricate any critical items. Backed by, PLATE MILL for the raw material, just the next door and a dedicated team of well trained and qualified welders.
The facilities available at PSC are CNC Oxycutting M/c, Strip Cutting M/c, CNC Plasma Cutting, drilling & Punching M/c and 3000Ton Press Brake. Customers can order Flat Bar, any complicated Shapes to be cut, Punched, Drilled and Fa-bricated.
Besides Destructive Test, PSC also provide NDT (Non Destructive Test) such as; UT/Ultrasonic Test, DP/Dye Penetrant, and MPI/Magnetic Particle according by cus-tomer demand.
With our Coil Service Centre, we are able to provide cutting service for any of our steel coil products. With cut-to-length services, our CSC is able provide a custom-ized standard of lengths and widths to meet any requested specifications.
At CSC, our machines is also outfitted with leveling process, to ensure any sheets taken from the coils are flattened when it has been turned into steel sheets. Additional quality check from our trained Quality Control staff will en-sure the cutting quality and flatness level of the sheets we process before the it is delivered.
3. COIL SERVICE CENTER (CSC)2. PLATE SERVICE CENTER (PSC)
At the Forming Service Centre, our company is able to produce a wide variety of products for the construction industry. These coil based products are cold formed into the final products for the uses in different applications.
The cold formed products we produced in this facility are:
ERW Round Pipe, Square Pipe, Rectangular Pipe, Lipped Channel, Expanded Mesh, Bridge Deck, Equal Angle & Unequal Angle.
Bar service center is wire (re-bar) forming facility. Our machinery and experi-enced workforce are able to provides individualized service for your custom wire forming. With our cut-to-length, bending and threading machines theres virtually unlimited possibilities of wire shapes. We can cut, thread and bend up to 2,5mm steel wire and with a high degree of accuracy.
5. BAR SERVICE CENTER (BSC)4. FORMING SERVICE CENTER (FSC)
Services | Forming Service Center74
Services
75Steel Applications
BUILDINGS High Rise Buildings • Apartment • Hotel • Office Building • Landmark • Gas Processing & Distribution • Terminal & Cargo Handling System
Low Rise Buildings • Housing / Residence • Hospital • Office Building • Airport / Hangar • School
Commercial Buildings • Show Room • Supermarket & Hypermarket
Industrial Buildings • Air Pollution Control Equipment • Cement Plants • Chemical & Petrochemical Plant • Factory • Iron & Steel Mill • Oil Refinery • Pulp, Paper Mills & Wood Process • Warehouse • Workshop
Steel Applications
BRIDGES • Girder Bridging • Truss Bridging • Cantilever Bridging • Arch Bridging • Suspension Bridging • Cable-stayed Bridging • Railway Bridging
TOWERS • Transmission Tower • Substation Tower • Telecomunication Tower • Pole Tower • Monumental Tower • Billboard • Monitoring Tower • Watertank Tower
Gunung Steel Group Product
1. GUNUNG GARUDA PRODUCT
2. GUNUNG RAJA PAKSI PRODUCT
3. BUKIT TERANG PAKSI GALVANIZING SERVICES
Angle (HR)
Coil (Hot Rolled) Galvanized Wire
T-Beam
Floor Deck
Hot Roll Pickled Oil
Cell Form
Steel Plate SagrodWelded Beam Round & Deformed Bar
Lipped Channel
Cold Roll Coil (CRC)
Wide Flange Beam (IWF)
Rectangular Pipe
H - Beam (HR) King Cross
Spiral Pipe
Anchor Bolt
Square Pipe
Honey Comb Queen Cross
ERW Pipe
Wire Mesh
Wire Rod Wire Nail
Roof & Wall Sheeting
Angle CF
Annealed Wire
Bridge Deck
Nails
Expanded Mesh
Gunung Steel Group Product76
77Location Map
Location Map
Kalimalang
RiverKalimalang
River
Sum
atra
Jawa
Jawa
Halmahera
Iria
n
MM2100industrial town
DANAU INDAH
From CIKAMPEK
CIBITUNGTOL GATE
MM 2100TOL GATE
From JAKARTA
STM Cibitung
Sentra Niaga
GasStation
Gas Station
MiniMarketCamat &PolsekCibitung
Bojo
ng K
onen
g
Pal
agan
Wan
asar
i
Sand
ang
Riv
er
TAMBUN
CIKARANG
CIKAMPEK
Location
Direct to Location
TOL
Road
River
JAKARTA
Jl.
Raya
Imam
Bonjol
Jl.
Imam
Bon
jol
4
T - junction of Pasar Warung Bongkokand Tugu Bambu Runcing
T O L
J A K A R T A
-
C I K A M P E K
± 3 KM toGunung Steel Group
± 90
0 m
PT. Bukit TerangPaksi Galvanizing GSG Gate
PT. Gunung GarudaPT. Gunung Raja Paksi
CIBITUNG
Gas Station
AIRPORT57 KM
SEAPORT40 KM
DOWNTOWN32 KM
DKI JAKARTA
CIBITUNGTOL GATE
HalimPerdanaKusuma
KawasanIndustriPulo Gadung
Pulo Gadung
Semanggi
Kalideres
Grogol
PasarMinggu
AncolTanjung Priok
TANGERANG
BOGOR
CIKAMPEK
AREA
LIPPO CITY10 KM
Head Office & Factory:Jl. Imam Bonjol 4, Ds. Sukadanau, Warung Bongkok, Cikarang Barat,Bekasi 17520, West Java - IndonesiaPhone: +62 21 8900 666 / 8900 111Fax: +62 21 890 0555 / 890 1588Email: [email protected]
Jakarta Representative Office:Jl. Pangeran Jayakarta No.105-GJakarta 10730 - IndonesiaPhone: +62 21 629 8031
Medan Office & Factory:Jl. Medan Belawan Km. 10Medan, North Sumatra - IndonesiaPhone: +62 61 6851333 / 3000 8170
www.grdsteel.com