Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Product Catalogue
Identification Technologies
ELID is an acronym for Electronic Identification
ELID was established on Sept 9, 1989 in Kuala Lumpur, Malaysia, and is well known for supplying Access Control Systems, Time Attendance Systems and Integrated Security Management Systems. It is one of the largest suppliers of Access Control System in South East Asia.
GoalWe have progressed steadily to capture a significant market share in South East Asia.We aim to consolidate this, and extend our market coverage throughout the world.
Over the past 19 years, ELID has acquired valuable expertise and experience in key technologies related to the electronic identification and integrated security management system industry. ELID is committed to the continual development of innovative new products year after year.
VisionOur vision is to be a world-renowned manufacturer of Electronic Identification Systems.
MissionOur mission is to create original, innovative and superior products at affordable prices and provide genuine customer satisfaction as well as to contribute to the well-being of society.
BeliefWe believe that our greatest asset is our people. Our people are behind our growth and success. No matter how much capital, technology and equipment we boast, it is bound to fail if human resources are not developed. Therefore we strive to “Make People Before Making Products”, and we are committed to bring out the best in people through comprehensive and systematic human resource development programs.
CommitmentWe will constantly challenge ourselves to be a God-fearing, moral and ethical Company, whose employees are honest and trustworthy, and uphold high ethical standards in all their dealings.
Products Road Map Access Control System
EL360 Access Control SystemEL370 Access Control SystemEL1300 Access Control SystemEL1330 Access Control SystemEL2200 series Access Control SystemEL3000 Fingerflex Access Control SystemFC1205 Car Park Access Control SystemEL2205L Lift Access Control System
Time Recording Terminal
ET636 Time Recording TerminalET630 Time Recording Terminal
ET1200 series Time Recording TerminalET3100 Bioflex Time Recording Terminal
Access Management Software
EsofWIN X3EsofWIN2
E.WIN
Time Attendance Software
OnTime Single-shift Time Attendance SoftwareEasyTime Single-shift Time Attendance Software
Chronos Single-shift Time Attendance Software
E.Time Multiple-shift Time Attendance Software
Reader/KeypadMifare Smart Card ReaderHID Proximity ReaderEM Proximity Reader
Bar Code ReaderMagnetic ReaderBiometric Reader
Keypad
Communicator/ConverterEL70T CommunicatorEL70BS CommunicatorEL70D CommunicatorEL70U CommunicatorEL38 Communicator
EL78A LAN Terminal Server
EA48 ConverterCV4823 Converter
EA52 ConverterCard
Mifare cardHID CardEM CardMagnetic Card
AccessoriesPower Supply & TransformerMetal CasingBufferTime Clock Interface Software
E.SDK Time Clock Software Development ToolETWIN Interface Software
OnTime Plus Multiple-shift Time Attendance Software
Relay Interface Unit
EL70L LAN Terminal Server
EL360 Access Control SystemThe EL360 Single-Door Access Controller combines access controller, card reader and keypad, designed to work independently. Multiple units can be connected together such that programming and report generations are handled through a PC running an ELID access management software.
Highlights of EL360
Storage capacity: Stores up to 2,000 user-IDs and 1,000 offline transactionsDisplay and keypad: LED 7-segment display and 16-key keypad
Built-in proximity reading module (EM/HID/Mifare, depending on the type of card reader used) Caters for timers and time zones, limiting access and users to different times of the dayHigh security level while door is forced to open. The inputs and outputs are embedded on a separate module at the EZ6 which is placed in a secure areaSimple programming set-up with scroll-down menu within the controllerFirmware can be updated in-circuit, through the serial download from the PCEquipped with a calendar clock chip to give an accurate date and time
Battery back-up for internal data storage and time clock
Communication Interface: RS485
Dimensions: 115(H)x90(W)x30(D) mm
Technical Specification
MCU 8-bit CPU running at 20 MHz
Memory 2KB RAM, 32KB Flash, 64KB EEPROM
Clock Real-time Clock with Lithium back-up
Communication Interface
RS485 (2-wire)
Operating Temperature (ºC)
0-50
Output 2 (Door Lock, General Purpose Output)
Input 3 (Push Button, Door Sensor, Sensor Input)
Built-in In Reader
Out Reader External Built-inBuzzer
Indicator LED 7-segment
Tamper Switch Built-in
12 VDC Power Supply
Current Consumption 0.5A
FeaturesCard Database 2,000
Transaction Database 1,000
Wiegand 26-bit, Free Wiegand, proprietary
Card Format
Operation Mode 3 (Card, Card + PIN, PIN)
Time Zone 10
Timer 24
Holiday 20
Yes Adjustable Lock Release Time Permanent Lock Release
Yes
Automatic Pin Disable Time Zone
Yes
Automatic Lock Release Time Zone
Yes
Inhibit Access Yes
Continuous Swiping Yes
Keypad Lock Out Yes (PIN mode only)
Baud Rate 2,400 to 9,600
Weight: 400g
SYSTEM CONFIGURATION
BATT
Power SupplyAdaptor
BATT
EL360
#1 #2 #3
EL360 EL360
#15 #16
EL360 EL360
Ordering InformationEL-0360-S02 EL360E/S Single-door Security Access System with built-in EM Proximity Reader, Keypad & EM
Proximity Master Card in Silvery White Plastic Housing with Blue LED (w/o EZ6 & Power Supply)
EL-0360-B02 EL360E/B Single-door Security Access System with built-in EM Proximity Reader, Keypad & EM Proximity Master Card in Black Plastic Housing with Red LED (w/o EZ6 & Power Supply)
EA-Z006-G01 EZ6 Remote Relay for EL360/370 in Plastic Housing
RS232
maximum up to 16 units of EL360 per bus (1KM)
RS485
AC 230VPower Supply
Adaptor
Back-up Battery
12VDC
EL360 Controller c/w In Reader & Keypad
Exit Reader
FFL
Sensor
EM Lock
General Purpose OutputSupervised Input
Door
Sensor
EM Lock
Exit ReaderEL360 Controller c/w In Reader & Keypad
12VDC
AC 230V
Back-up Battery
FFL
Door
EZ6
Elid Access Management Software
Communicator
EL360 Secure-mode Stand-alone Configuration
EL360 Stand-alone Configuration
EL360 System Configuration
EL370 Access Control SystemThe EL370 Single-Door Access Controller combines access controller, card reader and keypad. The features of the EL360 and EL370 are identical. The only difference is that the EL 370 has a LCD display whereby the EL360 has a 7-segment display.
Highlights of EL370Storage capacity: Stores up to 2,000 user-IDs and 1,000 offline transactionsDisplay and keypad: 122 X 32 pixels backlit Graphical LCD display and 16-key keypadBuilt-in proximity reading module (EM/HID/Mifare, depending on the type of card reader used)
Caters for timers and time zones, limiting access and users to different times of the dayHigh security level while door is forced to open. The inputs and outputs are embedded on a separate module at the EZ6 which is placed in a secure areaSimple programming set-up with scroll-down menu within the controller
Firmware can be updated in-circuit, through the serial download from the PCEquipped with a calendar clock chip to give an accurate date and time
Battery back-up for internal data storage and time clockCommunication Interface: RS485
Dimensions: 115(H)x90(W)x30(D) mm
Technical Specification
MCU 8-bit CPU running at 40 MHz
Memory 2KB RAM, 32KB Flash, 64KB EEPROM
Clock Real-time Clock with Lithium back-up
Communication Interface
RS485 (2-wire)
Operating Temperature (ºC)
0-50
Output 2 (Door Lock, General Purpose Output)
Input 3 (Push Button, Door Sensor, Sensor Input)
Built-in In Reader
Out Reader External
Built-inBuzzer
Indicator 122 X 32 pixels Graphical LCD
Tamper Switch Built-in
12 VDC Power Supply
Current Consumption 0.5A
FeaturesCard Database 2,000
Transaction Database 1,000
Wiegand 26-bit, Free Wiegand, proprietary
Card Format
Operation Mode 3 (Card, Card + PIN, PIN)
Time Zone 10
Timer 24
Holiday 20
Yes Adjustable Lock Release Time Permanent Lock Release
Yes
Automatic Pin Disable Time Zone
Yes
Automatic Lock Release Time Zone
Yes
Inhibit Access Yes
Continuous Swiping Yes
Keypad Lock Out Yes (PIN mode only)
Baud Rate 2,400 to 9,600
Weight: 400g
SYSTEM CONFIGURATION
General Purpose OutputSupervised Input
Door
BATT
Power SupplyAdaptor
12 VDC
maximum up to 16 units of EL370 per bus (1KM)
EL370
#1 #2 #3
EL370 EL370
#15 #16
EL370 EL370
Ordering InformationEL-0370-S01 EL370E/S Single-door Security Access System with built-in EM Proximity Reader, Keypad & EM Proximity
Master Card in Silvery White Plastic Housing with GLCD display (w/o EZ6 & Power Supply)
EL-0370-B01 EL370E/B Single-door Security Access System with built-in EM Proximity Reader, Keypad & EM Proximity Master Card in Black Plastic Housing with GLCD display (w/o EZ6 & Power Supply)
EA-Z006-G01 EZ6 Remote Relay for EL360/370 in Plastic Housing
Sensor
EM Lock
BATT
AC230V12VDC
Back-up Battery
EL370 Controller c/w In Reader & Keypad
Exit Reader
Door
AC230V
Back-up Battery
EL370 Controller c/w In Reader & Keypad
Exit Reader
FFL
FFL
EM Lock
Sensor
RS232 RS485
EZ6
Elid Access Management Software
Communicator
Power Supply Adapter
EL370 Stand-alone Configuration
EL370 Secure-mode Stand-alone Configuration
EL370 System Configuration
EL1300 Access Control SystemEL1300 Single Door Controller is designed for small to mid-sized enterprises. All functions can be programmed through its entry keypad unit. Multiple units can be connected together such that programming and report generations are handled through a PC running an ELID access management software.
Highlights of EL1300Storage capacity: Stores up to 1,750 user-IDs and 1,000 offline transactionsReader type: Supports various types of reader such as Magnetic, Proximity, Mifare Contactless Smart Card reader
Technical SpecificationMCU 8-bit CPU running at 8 MHz
Memory 512B RAM, 32KB Flash ROM, 16KB EEPROM
Clock Real-time Clock with Lithium back-up
Communication Interface
Multi-drop or RS485 (2-wire)
Operating Temperature (ºC)
0-50
Output 2 (Door Lock, General Purpose Output)
Input 5 (Exit Push Button, Door Sensor, 3 Supervised Inputs)
External In Reader
Out Reader External
Built-inBuzzer
Indicator Reader LED
Tamper Switch Built-in
15VAC input, 13.8V output, 1.5A outputPower Supply
Current Consumption 0.5A
FeaturesCard Database 1,750
Transaction Database 1,000
Wiegand 26-bit, Free Wiegand, ELID Magnetic, ABA
Card Format
Operation Mode 3 (Card, Card + PIN, PIN)
Time Zone 10
Timer 24
Holiday 20
Yes Adjustable Lock Release Time
Permanent Lock Release Yes
Automatic Pin Disable Time Zone
Yes
Automatic Lock Release Time Zone
Yes
Inhibit Access Yes
Continuous Swiping
Keypad Lock Out Yes (PIN mode only)
Baud Rate 2,400 to 9,600
Caters for timers and time zones, limiting access and users to different times of the day
Provision for Anti-passback, Automatic Lock Release Time Zone and Automatic PIN Disable Time ZoneFirmware can be updated in-circuit, through the serial download from the PCEquipped with a calendar clock chip to give an accurate date and time
Battery back-up for internal data storage and time clock
Communication interface: Multi-drop or RS485
Anti-Passback Yes
Dimensions: 198(H)x138(W)x40(D) mm
Weight: 400g
Yes
SYSTEM CONFIGURATION
EL1300 Stand-alone Configuration
Ordering InformationEL-1300-003 EL1300 Single-door Security Access System, 17VAC operation, with EM Proximity Master Card
(w/o 1.5A Transformer, Reader, Keypad & Metal Housing)
Door
EM Lock
Sensor
1 General Purpose Outputs
3 Supervised Inputs
FFL
12 VDC Power Supply
BATT
Back-up Battery
AC 230V
Keypad In Reader
Exit Reader
RS232
communicator
Multidrop / RS485
#1 #2 #3
Bus 1
#16
EL1300 EL1300 EL1300 EL1300Elid Access Management Software
maximum up to 16 units of EL1300 per bus (1KM)
EL1300 System Configuration
EL1330 Access Control SystemEL1330 is a single-door controller designed to work independently. The EL1330 replaces the popular EL1300 and offers a number of new features over EL1300. In addition to RS485 and ELID proprietary Multi-drop, the EL1330 offers option of using TCP/IP by plugging a LAN module on board. The numbers of inputs and outputs have been increased and a new MCU is used which operates 4 times faster than the EL1300.
Highlights of EL1330Storage capacity: Stores up to 2,000 user-IDs and 1,000 offline transactionsReader type: Supports various types of reader such as Proximity and Mifare Contactless Smart Card reader
Technical SpecificationMCU 8-bit CPU running at 20 MHz
Memory 2KB RAM, 32KB Flash ROM, 32+32KB EEPROM
Clock Real-time Clock with Lithium back-up
Communication Interface
Multi-drop, RS485 (2-wire), or Ethernet (with LAN module)
Operating Temperature (ºC)
0-50
Output 3 (Electric Lock, 2 General Purpose Outputs)
Input 6 (Exit Push Button, Door Sensor, 4 Supervised Inputs)
External In Reader
Out Reader External
Built-inBuzzer
Indicator Reader LED
Tamper Switch Built-in
15VAC input, 13.8V output, 1.5A outputPower Supply
Current Consumption 0.5A
FeaturesCard Database 2,000Transaction Database
1,000
Wiegand 26-bit, Free WiegandCard Format
Operation Mode 3 (Card, Card + PIN, PIN)
Time Zone 10
Timer 24
Holiday 20
Yes Adjustable Lock Release Time
Permanent Lock Release
Yes
Automatic Pin Disable Time Zone
Yes
Automatic Lock Release Time Zone
Yes
Inhibit Access Yes
Continuous Swiping
Keypad Lock Out Yes (PIN mode only)
Baud Rate 2,400 to 9,600
Anti-Passback Yes
Able to communicate with the PC through the Ethernet (EL1330 with LAN module)
Caters for timers and time zones, limiting access and users to different times of the day
Provision for Anti-passback, Automatic Lock Release Time Zone and Automatic PIN Disable Time ZoneFirmware can be updated in-circuit, through the serial download from the PCEquipped with a calendar clock chip to give an accurate date and time
Battery back-up for internal data storage and time clock
Communication interface: Multi-drop or RS485 or Ethernet
Yes
Dimensions: 133(H)x150(W)x27(D) mmWeight: 400g
SYSTEM CONFIGURATION
Stand-alone Configuration
Ordering InformationEL-1330-001 EL1330 Single-door Security Access System, 12VAC operation, with EM Proximity Master Card
(w/o Power Supply, Reader, Keypad & Metal Housing)
EA-TCPM-G02 TCPIP LAN Module (ZNE10T) built-in with RJ45 socket (for EL1330), 10M
Door
EM Lock
Sensor
2 General Purpose Outputs
4 Supervised Inputs
FFL
12 VDC Power Supply
BATT
Back-up Battery
AC 230V
Keypad In Reader
Exit Reader
RS232
communicator
Multidrop / RS485
#1 #2 #3 #16
maximum up to 16 units of EL1330 per bus (1KM)
RS232
communicator
Hub
WAN / LAN
Hub
Hub
EL1330 EL1330 EL1330 EL1330Elid Access Management Software
Elid Access Management Software
EL1330 Stand-alone Configuration
EL1330 System Configuration
EL1330 LAN Configuration
EL2200 series Access Control SystemThe EL2200 has established a solid reputation as an extremely reliable and versatile controller, easy-to-learn, easy-to-use and problem free. Various options and accessories allow the EL220X to be used to control doors (1 or 2 doors), elevators (up to 64 floors), car-park barriers (with Anti-passback) and time attendance.
Highlights of EL220X
EL2200The EL2200 is packaged in a plastic casing, with display and keypad on the cover, allowing the unit to be wall-mounted at eye level, to facilitate programming and report viewing.
EL2205The EL2205 is designed for mounting inside a metal panel together with power supply and back-up battery. The EL2205 can be expanded to become a 2-door, 2-reader controller by adding an EA2207 extension board.
Storage capacity: Stores up to 12,800 user-IDs and 4,000 offline transactions
Standard EL220XCard Database Transaction Database
1,600 2,000
Standard EL220X 3,200 1,000
EL220X with extended memory
6,400 4,000
EL220X with extended memory
12,800 2,000
Display and keypad: 2x20-character backlit LCD display and 16-key keypadReader type: Supports various types of reader such as Magnetic, Bar Code, Proximity, Touch Memory, Mifare Contactless Smart Card reader
Provision for dual card entry, output activation mapped to input status changes, fast reading speed and tail tag alarm operation
Caters for timers and time zones, limiting access and users to different times of the day
Provision for Anti-passback, Automatic Lock Release Time Zone and Automatic PIN Disable Time Zone
Simple programming set-up with scroll-down menu within the controller
Equipped with a calendar clock chip to give an accurate date and time
Battery back-up for internal data storage and time clock
Communication interface: Multi-drop
Dimensions: 212(H)x155(W)x55(D) mm
Weight: 800g – 1kg
FeaturesCard Database 1,600 (Maximum 12,800)
Transaction Database
1,000 (Maximum 4,000)
Wiegand 26-bit, Free Wiegand, ELID Magnetic, ABA, Bar-Code
Card Format
Operation Mode 3 (Card, Card + PIN, PIN)
Time Zone 10
Timer 24
Holiday 20
Yes Adjustable Lock Release Time
Permanent Lock Release
Yes
Yes
Automatic Lock Release Time Zone
Yes
Inhibit Access Yes
Continuous Swiping
Keypad Lock Out Yes (PIN mode only)
Baud Rate 2,400
Anti-Passback Yes
Yes
Dual Card Yes
Automatic Pin Disable Time Zone
Technical Specification
MCU 8-bit CPU
Memory 32KB/128KB SRAM, 512 EEPROM
Clock Real-time Clock with Lithium back-up
Communication Interface
Multi-drop
Operating Temperature (ºC)
0-50
Output 1 (On-board), 6 (Optional)
Input 2 (On-board), 2 (Optional)
External In Reader
Out Reader External
Built-inBuzzer
Indicator 2x20-character LCD
Tamper Switch Built-in
15VAC input, 13.8V output, 2.5A output
Power Supply
Current Consumption 90mA
SYSTEM CONFIGURATION
Stand-alone Configuration
Ordering InformationEL2200 Security Access System with LCD display, Keypad & EM Proximity Master Card in Plastic Housing (w/o Power Supply & Reader), 1kg
EL2205 Security Access System with LCD display, Keypad & EM Proximity Master Card (w/o Power Supply, Reader & Metal Housing), 800g
Door
EM Lock
Sensor
6 General Purpose Outputs
2 Supervised Inputs
FFL
12 VDC Power Supply
BATT
Back-up Battery
AC 230V
Keypad In Reader
Exit Reader
EL2200 Stand-alone Configuration
EL2200 System Configuration
RS232
communicator
Multidrop
#1 #2 #3 #16
maximum up to 16 units of EL2200 per bus
EA-2207-001 EA2207 Extension Board c/w Accessories for EL2205
EA-2201-001 EA2201 Extended Memory EPROM & RAM Chip for EL2200/2205
EL2200 EL2200 EL2200 EL2200
Elid Access Management Software
EL-2205-020
EL-2200-001
EL3000 Fingerflex Access Control SystemThe EL3000 FINGERFLEX Controller combines access controller, card reader and fingerprint recognition all-in-one compact and unique system designed after the shape of a human thumb.
Highlights of EL3000
Display and keypad: 2x16-character backlit LCD display and 16-key keypadBuilt-in proximity reading module (EM/HID/Mifare, depending on the type of card reader used) Highly accurate fingerprint recognition
Fast verification time; suitable and effective for office or clean working environmentMultiple verification mode
Caters for timers and time zones, limiting access and users to different times of the dayProvision for Anti-passback, Automatic Lock Release Time Zone and Automatic PIN Disable Time ZoneHigh security level while door is forced to open. The inputs and outputs are embedded on a separate module at the EL3Z which is placed in a secure area
Simple programming set-up and enrollment with scroll-down menu within the controllerFirmware can be updated in-circuit, through the serial download from the PCEquipped with a calendar clock chip to give an accurate date and time
Scanner: Silicon sensor. It provides accurate fingerprint recognition without being affected by skin texture and condition. Storage capacity: up to 9,000 users and 9,000 offline transactions
Verification Mode Storage Capacity (maximum)
Fingerprint only 89 users
ID + PIN, ID only 9,000 users
ID + Fingerprint 2,000 users
Card (Elid format) + Fingerprint
9,000 users
Battery back-up for internal data storage and time clock
Communication interface: RS485 (4-wire)
Dimensions: 190(H) x 120(W) x 50(D) mm
Weight: 800g
Additional I/O (EL3Z)
In Reader
Holiday 40
Adjustable Lock Release Time Yes
Permanent Lock Release
Yes
Automatic Pin/Fingerprint Disable Time Zone
Yes
Automatic Lock Release Time Zone
Yes
Inhibit Access Yes
Continuous Swiping Yes
Anti-Passback Yes
Baud Rate 2,400 to 57,600
Technical Specification
MCU
Clock Real-time Clock with Lithium back-up
Fingerprint Sensor Silicon, 500 dpi
Communication Interface
RS485 (4-wire)
1 (EM-Lock)Output
Input 2 (Door Sensor, Push Button)
4-Input (non-supervise) and 6-Output
Built-in
Out Reader External
Built-inBuzzer
Indicator 2x16-character LCD
Tamper Switch Built-inPower Supply 12V DC
Current Consumption 12V / 1 A
Operating Temperature (ºC) -20°C and 70°C
Operating Humidity <85%
Features
User Database 9,000 (adjustable)
Transaction Database 9,000
Verification Mode Fingerprint only (1:N), ID only, ID + Fingerprint (1:1), ID + PIN
Verification Time < 1 second
Enrollment Maximum 2 fingerprints enrollment per user
False Rejection Rate <0.5%
False Acceptance Rate <0.001%
Card Format Wiegand 26-bit, Free Wiegand
Time Zone 24
Timer 24
Sensor
EM Lock
FFL
AC 230V
BATT
Back-up Battery
Power Supply Adaptor
12VDC
In Reader Exit Reader
6 General Purpose Output
4 Supervised Input
EL3Z
Push Button
EL3000 Stand-alone Configuration
16-bit CPU
Ordering InformationEL-3000-001 EL3000/MF Fingerflex Biometric Access System, Built-in with Mifare Contactless Reader in
Plastic Housing (w/o Power Supply)
EL-3000-002 EL3000/EM Fingerflex Biometric Access System, Built-in with EM Reader in Plastic Housing c/w Template Backup Manager Software (w/o Power Supply)
EL-3000-003 EL3000/HID Fingerflex Biometric Access System, Built-in with HID Reader in Plastic Housing c/w Template Backup Manager Software (w/o Power Supply)
#1 #2 #3 #16
maximum up to 16 units of EL3000 per bus (1KM)
EL3000 System Configuration
EL-003Z-001 EL3Z Remote I/O Relay Module
EL38 communicator
EL3000 EL3000 EL3000 EL3000
Sensor
EM Lock
FFL
AC 230V
BATT
Back-up Battery
Power Supply Adaptor
12VDC
In Reader Exit Reader
6 General Purpose Output
4 Supervised Input
EL3Z
Push Button
EL3000 Stand-alone Configuration
Elid Access Management Software
4-wire RS485RS232
FC1205 Car Park Access Control SystemThe FC1205 Car Park System caters for a small car park with one entry barrier and one exit barrier. The controller is housed in a sturdy metal cabinet. Programming can be done either via using the keypad at the controller panel or remotely via a PC.
Highlights of FC1205Storage capacity: Stores up to 3,200 user-IDs and 2,000 offline transactions
Display and keypad: 2x20-character backlit LCD display and 16-key keypadReader type: Supports various types of reader such as Magnetic, Bar Code, Proximity, Mifare Contactless Smart Card readerCaters for timers and time zones, limiting access and users to different times of the dayComprehensive Anti-passback feature for car-park management
Simple programming set-up with scroll-down menu within the controllerFirmware can be updated in-circuit, through the serial download from the PCEquipped with a calendar clock chip to give an accurate date and timeBattery back-up for internal data storage and time clock
Communication interface: Multi-drop
Dimensions: 381(H)x330(L)x91(W) mm
Technical Specification
MCU 8-bit CPU
Memory 32KB/128KB SRAM, 512 EEPROM
Clock Real Time Clock with Lithium back-up
Communication Interface
Multi-drop
Operating Temperature (ºC)
0-50
Output 1 (On-board), 6 (Optional)
Input 2 (On-board), 2 (Optional)
External In Reader
Out Reader External
Built-inBuzzer
Indicator 2x20-character LCD
Tamper Switch Built-in
15VAC input, 13.8V output, 2.5A output Power Supply
Current Consumption 90mA
Features
Card Database 3,200
Transaction Database 1,000 Wiegand 26-bit, Free Wiegand, ELID Magnetic, ABA, Bar-Code
Card Format
Operation Mode 1(Card)
Time Zone 10
Holiday 20
Yes Permanent Lock Release
Inhibit Access Yes
Anti-Passback Yes
ATZ Mode Yes
Keypad Lock Out
Baud Rate 2,400
Yes (PIN mode only)
NormalCard Database Transaction Database
1,600 2,000
Extended 3,200 1,000
Loop Detector
CAR PARK ENTRY CAR PARK EXIT
In Reader
Out Reader
FC1205Controller
FC1205 Standard Configuration
Elid Access Management Software
Loop Detector
Ordering InformationEB-1205-001 FC1205 Car Park Access System for 1-Entry & 1-Exit Point c/w EL2205 Board, EP23 Power
Supply, LCD display, 16-keys Keypad for programming & Relay in Metal Housing (w/o Master Card)
communicator
maximum up to 16 units of FC1205 per bus (1KM)
RS232 Multidrop
RS232
communicator
Multidrop
#1 #2 #3 #16
maximum up to 16 units of FC1205 per bus FC1205 FC1205 FC1205 FC1205
Elid Access Management Software
FC1205 System Configuration
EL2205L Lift Access Control SystemThe EL2205L Lift Access Controller is designed for elevators. One relay contact is provided for each floor that the lift serves. Maximum size is up to 64 floors. EL2205L consists of 3 parts. The main controller and power supply are housed in a single metal cabinet. Reader is usually mounted at the lift operation panel, while floor selection board with associated relays is separately mounted in another cabinet. Communication between floor selection unit and main controller may be up to 1 KM. Programming can be done either via using the keypad at the controller panel or remotely via a PC.
Highlights of EL2205L
Storage capacity: Stores up to 2,700 user-IDs and 2,000 offline transactionsDisplay and keypad: 2x20-character backlit LCD display and 16-key keypadReader type: Supports various types of reader such as Magnetic, Bar Code, Proximity, Mifare Contactless Smart Card reader
Caters for timers and time zones, limiting access and users to different times of the daySimple programming set-up with scroll-down menu within the controllerFirmware can be updated in-circuit, through the serial download from the PCEquipped with a calendar clock chip to give an accurate date and time
Battery back-up for internal data storage and time clock
Communication interface: Multi-drop
Dimensions: 415(H)x405(W)x121(D) mm for each metal casingTechnical Specification
MCU 8-bit HCMOS running at 4.9 Mhz
Memory 32KB SRAM, 512B EEPROM
Clock Real Time Clock with Lithium back-up
Communication Interface
Multi-drop
Operating Temperature (ºC)
0-50
External In Reader
Out Reader External
Built-inBuzzer
Indicator 2x20-character LCD
Tamper Switch Built-in
90mA excluding reader
Power Supply
Current Consumption
Card Database 2,700
Transaction Database 2,000
Wiegand 26-bit, Free Wiegand, ELID Magnetic, ABA, Bar-Code
Card Format
Operation Mode 3 (Card, Card + PIN, PIN)
Time Zone 10
Holiday 20
Controller
15VAC input, 13.8V output, 2.5A output
Floor Selection Unit CPU MC68HC05C8 8-bit MPU
Output 32 channels
Interface Relay 1 SPDT, 3A rating
Features
Timer 24
Adjustable Lock Release Time
Yes
Permanent Lock Release Yes
Automatic Pin Disable Time Zone
Yes
Automatic Floor Time Zone Yes
Floor Zones 64
Inhibit Access Yes Continuous Swiping Yes
Dual Card Yes
Keypad Lock Out Yes (PIN mode only)
Baud Rate 2,400
RS232
EL2205L
BATT Power Supply
Lift Car Lift Car
BATT Power Supply
EL2205L EL2205L
BATTPower Supply
Lift Car
EL2205L
Power SupplyBATT
Lift Car
Lift Motor Room
PowerSupply
BATT
EFD16xx EFD16xx
PowerSupply
BATT
EFD16xx
PowerSupply
BATT
EFD16xx
PowerSupply
BATT
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1
Ground Floor
EL2205L Standard Configuration
Ordering Information
EL-2205-L16 EL2205L/16 Lift Access System (Reader Optional)For 1-16 Floors Comprising: (w/o Master Card)1 x EL2205 Board, 2 x EP23 Power Supply 1.3A/12V, 1 x EB485 Board, 1 x EFD0016 Floor Selector (XS-1608-003), 1 x ES8A-1 Relay Board (16 points) & Mounted in metal casings x 2 (CS-1099)
EL2205L/32 Lift Access System (Reader Optional)For 1-32 Floors Comprising: (w/o Master Card)1 x EL2205 Board, 2 x EP23 Power Supply 1.3A/12V, 1 x EB485 Board, 1 x EFD0032 Floor Selector (XS-1608-003), 3 x ES8A-1 Relay Board (32 points) & Mounted in metal casings x 2 (CS-1099)
EL2205L/48 Lift Access System (Reader Optional)For 1-48 Floors Comprising: (w/o Master Card)1 x EL2205 Controller, 3 x EP23 Power Supply 1.3A/12V, 1 x EB485 Board, 1 x EFD0032 Floor Selector (XS-1608-003), 3 x ES8A-1 Relay Board (32 points) & 1 x EFD0016 Floor Selector (XS-1608-003), 1 x ES8A-1 Relay Board (16 points) & Mounted in metal casings x 3 (CS-1099)
EL2205L/64 Lift Access System (Reader Optional)For 1-64 Floors Comprising: (w/o Master Card)1 x EL2205 Board, 3 x EP23 Power Supply 1.3A/12V, 1 x EB485 Board, 2 x EFD0032 Floor Selector (XS-1608-003), 6 x ES8A-1 Relay Board (64 points) & Mounted in metal casings x 3 (CS-1099)
EL-2205-L32
EL-2205-L48
EL-2205-L64
Elid Access Management Software
maximum up to 16 units of EL2205L per bus (1KM)
communicator
Multidrop
EsofWIN2 Access Management SoftwareThe EsofWIN2 is a Windows-based single workstation access management software. EsofWIN2 is rich in features, offering an easy way to manage security of up to 64 controllers, and generate time attendance reports (together with OnTime single-shift time attendance software).
A powerful graphic user interface is provided, where devices and doors status appear as icons on floor-plan maps, and the icon changes as status of the device changes. It also allows pictures of users to be put into the database.
Highlights of EsofWIN2
Provides system access rights for different users
Simple setting of time zones, door-access levels and lift-floor access for card holdersProvides basic alarm monitoring features (Acknowledge, Disarm and Arm)
Provides real-time activity monitoring, which means activities occurring at the controllers are reported immediately and displayed on the On-line Monitoring Screen or redirected to a printer connected to the PC
Report filtering up to 3 layers
The attendance records can be exported into text format which can be used for integration with third party software
Multiple-shift time attendance software (OnTime Plus) is an optional module that integrated into EsofWIN2 to monitor staff’s attendance effectively
Provides modem support module that supports Hayes compatible dial-up and leased line modems.
Available in English, Chinese, Malay and Portuguese
System Requirement
Processor Pentium IV or higher
Operation System Microsoft Windows 2000/XP or higher
RAM 128 MB or higher
HDD 30 MB (Installation)100 MB (Operation)
Comm. Port 1
Printer Port 1
Display 800 x 600 (16 colours) or higher
Ordering InformationEW-EWIN-007 EsofWIN /0 Single-user Access Management Software, 1-4 Doors, add-on OnTime Time
Attendance Software (Single-shift) in CD
EK-0021-001 EsofWIN /1 Single-user Access Management Software, 1-16 Doors, add-on OnTime Time Attendance Software (Single-Shift) in CD (with EK21 Softkey, DB9)
EK-0022-001 EsofWIN /2 Single-user Access Management Software, 1-32 Doors, add-on OnTime Time Attendance Software (Single-Shift) in CD (with EK22 Softkey, DB9)
EsofWIN2 System Configuration
EK-0023-001 EsofWIN /3 Single-user Access Management Software, 1-64 Doors, add-on OnTime Time Attendance Software (Single-Shift) in CD (with EK23 Softkey, DB9)
EK-0027-001 EsofWIN /5 Single-user Access Management Software, 1-64 Doors, Modem Version, add-on OnTime Time Attendance Software (Single-Shift) in CD (with EK27 Softkey, DB9)
Optional Combination Software Key EsofWIN + OnTime Plus (Multiple-shift TMS):
EK-0012-EKM EsofWIN /1 Single-user Access Management Software + OnTimePlus /3 Time Attendance Software (unlimited users), 1-16 Doors in CD (with EKM12 Softkey, DB9)
EK-0015-EKM EsofWIN /2 Single-user Access Management Software + OnTimePlus /3 Time Attendance Software (unlimited users), 1-32 Doors in CD (with EKM15 Softkey, DB9)
EK-0018-EKM EsofWIN /3 Single-user Access Management Software + OnTimePlus /3 Time Attendance Software (unlimited users), 1-64 Doors in CD (with EKM18 Softkey, DB9)
EK-0021-EKM EsofWIN /5 Single-user Access Management Software + OnTimePlus /3 Time Attendance Software (unlimited users), Modem Version, 1-64 Doors in CD (with EKM21 Softkey, DB9)
#1 #2 #3 #4 #16
#17 #18 #19 #20 #32
#33 #34 #35 #36 #48
#49 #50 #51 #52#64
BUS #1
BUS #2
BUS #3
BUS #4
EsofWIN2
EL38
EL1330 EL2200 FC1205 EL2205L
EL70B / EL70D / EL70U
Multi-drop
4-wire RS485
EL3000 EL3000 EL3000 EL3000 EL3000
CV4823
EL70T
EL360 EL360 EL370
EL1300
EL1300
EL1330
EL1330 EL1300 EL2200 EL2205 EL2205
RS232
RS232
RS232
2-wire RS485
Multidrop
Maximum controller = 64 units
EsofWIN X3 Access Management SoftwareThe EsofWIN X3 is a simplified version of EsofWIN2 and only supports up to 8 doors. It provides most of the common features of EsofWIN2, but the GUI has been redesigned to be particularly user friendly. It also has built-in single-shift time attendance software (EasyTime).
Highlights of EsofWIN X3Administrator is able to access the full system whereby the operator only can view the software only
Simple setting of time zones (maximum 10 time zones), door-access levels and lift-floor access for card holders
Provides real-time activity monitoring, which means activities occurring at the controllers are reported immediately and displayed on the On-line Monitoring Screen or redirected to a printer connected to the PC
The attendance records can be exported into text/Excel format which can be used for integration with third party software
Available in English
System Requirement
Processor Pentium IV or higher
Operation System Microsoft Windows 2000/XP or higher
RAM 128 MB or higher
HDD 30 MB (Installation)100 MB (Operation)
Comm. Port 1
Printer Port 1
Display 800 x 600 (16 colours) or higher
EsofWIN X3 System Configuration
Multidrop
EsofWIN X3/0EL2200
FC1205
#1 #2
EL70T
EL1330 EL2205L EL1300
Maximum controller : 8 units
#3 #4#8
EsofWIN X3 System Configuration (RS485)
EsofWIN X3/0
EL360 EL370 EL1330 EL1300
CV4823
RS485
#1 #2 #3 #8
Maximum controller : 8 units
RS232
RS232
Ordering Information
EW-EWIN-X00 EsofWIN X3 Single-user Access Management Software in CD only, 1-8 doors
E.WIN Access Management SoftwareThe E.WIN is an enhanced version of EsofWIN2. It provides graphical user interface for data entry and information retrieval thus offering an easy way to manage security of up to 128 doors. It also has built-in single-shift time attendance software.
It is ideally designed with vast options and capabilities commonly required for a medium sized organization. E.WIN can be recognized easily as a key solution for security risks, enabling users with a peace of mind for a cost effective, robust and easily upgradeable system.
Highlights of E.WIN
Provides system access rights for different users
Provides a comprehensive audit trail reports of administrator/user’s actions
Simple setting of time zones, door-access levels and lift-floor access for card holdersProvides “Car Counting” facility
Provides basic alarm monitoring features (Acknowledge, Disarm and Arm)Provides real-time activity monitoring, which means activities occurring at the controllers are reported immediately and displayed on the On-line Monitoring Screen or redirected to a printer connected to the PC
System Requirement
Processor Pentium IV or higher
Operation System Microsoft Windows 2000/XP or higher
RAM 128 MB or higher
HDD 30 MB (Installation)100 MB (Operation)
Comm. Port 1
Printer Port 1
Display 800 x 600 (16 colours) or higher
Report filtering up to 3 layersThe attendance records can be exported into text/Excel format which can be used for integration with third party softwareProvides a built-in tiny web server module enabling the E.WIN information to be viewed through the standard web browsers anywhere at anytime easily
Multiple-shift time attendance software (E.Time) is an optional module that integrated into E.WIN to monitor staff’s attendance effectively
Provides modem support module that supports Hayes compatible dial-up and leased line modems
Supports TCP/IP network’s setting
Available in English and Chinese
E.WIN System Configuration
p
###
##
##
##
##
Hub
Hub
Hub
WAN/LAN
Sever
E.WIN
Client
Client
EL70D / EL70U
EL38
CV4823
EL360EL360 EL370 EL1300
EL70T
EL70T
EL70T
EL70T
EL70T
RS232
RS232
RS232
RS232
RS232
RS232
RS232
E.WIN LAN Configuration
Software Key
EL70D/EL70U
Hub
WAN/LAN
Hub
Hub
Hub
Hub
Hub
Hub
EL78A
EL1330
Multi-drop
EL2200 FC1205 EL2205L
EL78A
EL70L
4-wire RS485
2-wire RS485
EL360 EL360 EL370
Client
Client
#1
#17
#33
#49
#65
#81
#97
#113
#16
#32
#48
#64
#80
#96
#112
#128
BUS 1
BUS 2
BUS 3
BUS 4
BUS 5
BUS 6
BUS 7
BUS 8
EL1330
EL1330
EL1330
EL1330
EL1330
EL1330
EL1330
EL1300
EL1300
EL1300
EL1300
EL3000 EL3000 EL3000 EL3000 EL3000
EL2200
EL2200
EL2200
EL2200
EL2200
EL2200
FC1205EL2205
EL2205 EL2205
EL2205 EL2205
EL2205 EL2205
EL2205 EL2205
EL2205 EL2205
E.WIN
Multidrop
4-wire RS485
2-wire RS485
Multi-drop
Multi-drop
Multi-drop
Multi-drop
Multi-drop
Maximum controller : 128 units
Maximum controller : 128 units
EL3000 EL3000 EL3000
EL1330
EL1330
Ordering InformationEW-EWIN-D00 E.WIN /0 Single-User Access Management Software for controlling 1-4 Doors, add-on OnTime
Time Attendance Software (Single-Shift) & E.WIN LAN Module in CD
Optional Software Modules for E.WIN:
EW-EWIN-D01 E.WIN /1 Single-User Access Management Software for controlling 16 Doors, add-on OnTime Time Attendance Software (Single-Shift) & E.WIN LAN Module in CD (Softkey, DB9)
EW-EWIN-D02 E.WIN /2 Single-User Access Management Software for controlling 32 Doors, add-on OnTime Time Attendance Software (Single-Shift) & E.WIN LAN Module in CD (Softkey, DB9)
EW-EWIN-D03 E.WIN /3 Single-User Access Management Software for controlling 64 Doors, add-on OnTime Time Attendance Software (Single-Shift) & E.WIN LAN Module in CD (Softkey, DB9)
EW-EWIN-D04 E.WIN /4 Single-User Access Management Software for controlling 128 Doors, add-on OnTime Time Attendance Software (Single-Shift) & E.WIN LAN Module in CD (Softkey, DB9)
EW-EWIN-M01 E.WIN Time Management Module (E.Time), Multiple-Shift
EW-EWIN-M02 E.WIN Lift Access Module
EW-EWIN-M03 E.WIN Modem Module
EW-EWIN-M05 E.WIN WEB Support Module
ET630 Time Recording TerminalET630 is a versatile Time Recording Terminal with basic access control features and user friendly interface.
Highlights of ET630Storage capacity: Stores up to 6,000 offline transactions and unlimited user
Display: 128x64 pixels Graphical backlit LCD
Keypad: 4x4 matrix membrane keypad with feather-touch keys
Built-in proximity reading module (EM/HID/Mifare, depending on the type of card reader used)
Basic access control function through the connection of relay output to an electric lock
Can integrate with third party time attendance software
Simple programming set-up with scroll-down menu within the controller
Firmware can be updated in-circuit, through serial download from PC
Equipped with a calendar clock chip with on-board back-up battery to give an accurate date and time
Battery back-up for internal data storage and time clock
Communication interface: RS485
Dimensions: 135(H)x100(W)x30(D) mm
Technical Specifications
MCU 8-bit CPU running at 40 MHz
Memory 2 x 256K-bit EEPROM
Clock Real Time Clock with Lithium back-up
Communication Interface
RS485 (2-wire)
Output 1 (General Purpose)
Input 1 (Exit Push Button)
In Reader Built-in
Buzzer Built-in
Indicator Graphical backlit LCD, Buzzer
Power Supply 9V-15V
Current Consumption 300mA
Operating Temperature (°C)
0-55
Features
Card Database Unlimited (Time Clock), 500 (Door Access)
Transaction Database 6,000
Card Format Wiegand 26-bit
Operation Mode 1 (Card)
Mode of Database 3
Session 1
Job Code 99
Time Zone for Sounder 1
Timer for Sounder 7
Time per timer 30
Holiday 40
Adjustable Lock Release Time Yes
Automatic Lock Release Time Zone
Yes
Baud Rate 2,400 to 9,600
Weight: 400g
Elid Time Attendance Software
ET630 ET630 ET630 ET630
ET630 System Configuration
Ordering Information
ET-0630-002 ET630 Time Recording Terminal, EM Reader c/w cable
#1 #2 #3 #16
maximum up to 16 units of ET630 per bus (1KM)
communicator
RS232 RS485
ET636 Time Recording TerminalET636 is a versatile Time Recording Terminal simply designed for ease of use. The features of the ET630 and ET636 are identical. The only difference is the hardware setup for the system. ET636 is directly plugged into the PC via USB cable for data polling and power supplying.
Highlights of ET636
Storage capacity: Stores up to 6,000 offline transactions and unlimited userDisplay: 128x64 pixels Graphical backlit LCD
Keypad: 4x4 matrix membrane keypad with feather-touch keys
Built-in proximity reading module (EM/HID/Mifare, depending on the type of card reader used) Can integrate with third party time attendance software
Simple programming set-up with scroll-down menu within the controller
Firmware can be updated in-circuit, through serial download from PC
Equipped with a calendar clock chip with on-board back-up battery to give an accurate date and timeBattery back-up for internal data storage and time clock
Communication interface: USB
Dimensions: 135(H)x100(W)x30(D) mm
Technical Specifications
MCU 8-bit CPU running at 40 MHz
Memory 2 x 256K-bit EEPROM
Clock Real Time Clock with Lithium back-up
Communication Interface
USB
In Reader Built-in
Buzzer Built-in
Indicator Graphical backlit LCD, Buzzer
Power Supply 5V USB power supply
Current Consumption 300mAOperating Temperature (°C)
0-55
Features
Card Database Unlimited (Time Clock)
Transaction Database 6,000
Card Format Wiegand 26-bit
Operation Mode Card only
Mode of Database 3
Session 1
Job Code 99
Time Zone for Sounder 1
Timer for Sounder 7
Time per timer 30
Holiday 40
Weight: 1kg
Elid Time Attendance Software ET636
ET636 System Configuration
Ordering Information
ET-0636-001
USB Cable
ET636/E Time Recording Terminal with Stand (USB Communication), Chronos Software Installation CD, 10 EM Proximity Cards, USB Cable, Quick Start & User Manual contained in CD
Highlights of ET1200Storage capacity: Stores up to 10,000 offline transactions and unlimited user or 2,000 ID numbers.Display: 2x20-character LCD and 4x7-segment LED display
Keypad: 16-key keypad
Reader: Supports various types of reader such as Magnetic, Bar Code, Proximity, Touch Memory, Mifare Contactless Smart Card reader
Incorporates a complete set of diagnostic test routinesImproves data storage integrity checking
Caters for 9 working sessions with In & Out selection respectively
Built-in firmware allows ET1200 to be used with Job Costing, and Meal Subsidy application softwareCan integrate with third party time attendance software
Simple programming set-up with scroll-down menu within the controller
Firmware can be updated in-circuit, through the serial download from the PC
Technical Specifications
MCU 8-bit HCMOS running at 4.9 Mhz
Memory 32KB/128KB SRAM, 512 EEPROM
Clock Real Time Clock with Lithium back-up
Communication Interface
Multi-drop
Features
Card Database unlimited user or 2,000 ID numbers
ET1200 series Time Recording TerminalThe ET1200 Time Recording Terminal is housed in a sturdy metal cabinet. Power supply, including back-up battery (for 6 hours operation), lightning surge protector, and time operated relay output for linking to an external sounder are all built in.
Equipped with a calendar clock chip to give an accurate date and time
Battery back-up for internal data storage and time clock
Communication interface: Multi-drop
Dimensions: 295(H)x220(W)x95(D) mm
Output 1
Input 2
In Reader Built-in (except ET1205)
Buzzer LED
Indicator Built-in
Power Supply 240VAC input or 110VAC, 50 or 60Hz
Internal Back-up Battery
12V/1.2AH Sealed Lead Acid Battery
Current Consumption
90mA
Operating Temperature (ºC)
0-50
Transaction Database 10,000
Card format Wiegand 26-bit, Free Wiegand, ELID Magnetic, ABA, Bar-Code
Operation Mode 1 (Card)
Mode of Database 3
Session 9
Job Code 999
Time Zone for Sounder 18
Timer for Sounder 18
Holiday 20
Adjustable Lock Release Time
Yes
Auto Time Command Yes
Baud Rate 2400-9600
Weight : 4.6 - 5kg
Elid Time Attendance Software
Ordering Information
ET-1241-001 ET1241 Time Clock c/w Extended Memory (10K transaction records), ER35 Infra Red Bar Code Reader, backlit LCD, EP23 Power Supply, 12V/1.3AH Battery, Metal Housing & 1 set Barcode Master Card (2/5), 5kg
ET1237 Time Clock c/w Extended Memory (10K transaction records), ERM23 Proximity Reader, backlit LCD, EP23 Power Supply & 12V/1.3AH Battery in Metal Housing, 4.6kg
ET1200 System Configuration
ET12XX ET12XX ET12XX ET12XX
Maximum up to 16 units of ET12XX per bus (1KM)
#1 #2 #3 #16
ET-1237-001
ET-1233-001 ET1233 Time Clock c/w Extended Memory (10K transaction records), ERH23 Proximity Reader, backlit LCD, EP23 Power Supply, 12V/1.3AH Battery & Metal Housing, 4.7kg
ET-1201-001 ET1201 Time Clock c/w Extended Memory (10K transaction records), Magnetic Reader, EP23 Power Supply & 12V/1.3AH Battery in Metal Housing, 4.7kg
ET-1205-001 ET1205 Time Clock c/w Extended Memory (10K transaction records), backlit LCD, EP23 Power Supply & 12V/1.3AH Battery in Metal Housing (w/o Reader), 4.6kg
Multidrop RS232
communicator
Highlights of ET3100Scanner : Optical sensor
Storage capacity: Stores up to 30,000 offline transactions and 9,000 fingerprint templatesDisplay: 128x64 pixels Graphical backlit LCD
Keypad: 16-key keypad
Support proximity reader
High accurate fingerprint recognition
Fast verification time; suitable and effective for office or factory environmentEnables enrolment of up to 10 fingerprints for each user
Multiple verification mode
Caters for 9 working sessions with In & Out selection respectively
Basic access control function through the connection of relay output to an electric lock
Technical Specifications
MCU
Memory 512kbytes SRAM
Clock Real Time Clock with Lithium back-up
ET3100 Bioflex Time Recording TerminalET3100 is a user-friendly, reliable and cost-effective Optical Fingerprint Recognition Time Recording Terminal. It captures and stores fingerprint image as template and verifies each specific finger's unique ridge pattern for highly personalized identification. Therefore, abuse of time attendance through 'buddy punching' will never happen. The ET3100 also doubles up as a basic door access control system which secures your company's premises from unauthorized access.
Can integrate with third party time attendance software
Simple programming set-up and enrolment with scroll-down menu within the controllerFirmware can be updated in-circuit, through the serial download from the PCEquipped with a calendar clock chip to give an accurate date and timeBattery back-up for internal data storage and time clock
Communication Interface: RS485, TCP/IP LAN (optional)
Dimensions: 180(H) x 150(W) x 50(D) mm
Fingerprint Sensor Optical, 500 dpi
Communication Interface RS485, LAN (optional)
Onboard Output 2 (EM-Lock, Sounder)
Onboard Input 2 (Door Sensor, Push Button)
In Reader External
Out Reader External
Buzzer Built-in
Indicator LED
Tamper Switch Built-in
Power Supply 12V DC
Current Consumption 1.5A to 2.5A
Operating Temperature (ºC) 0°C - 55°C
Operating Humidity <85%
Weight : 600g
16-bit CPU
Elid Time Attendance Software
Ordering Information
ET-3100-001 ET3100 Fingerprint Time Recording Terminal, c/w DataCenterFP BioFlex Interface Software & Template Backup Manager Software for ET3100 in CD only
ET3100/L Fingerprint Time Recording Terminal, built-in with TCP/IP, c/w DataCenterFP BioFlex Interface Software & Template Backup Manager Software for ET3100 in CD only
Features
User Database 10,000
Fingerprint Template Database
9,000 templates
Transaction Database 30,000
Verification Mode Fingerprint only (1:N), ID only, ID + Fingerprint (1:1), ID + PIN
Verification Time Average 1 second for 1000 fingerprint templates
Enrollment Maximum 10 fingerprints enrollment per user
False Rejection Rate 1.4%
False Acceptance Rate 0.00001%
Session 9
Job Code 999
Time Zone for Sounder 1
Timer for Sounder 4
Times per Timer 18
Holiday 20
Adjustable Lock Release Time
Yes
Baud Rate 2,400 to 57,600
ET3100 System Configuration
RS232 RS485
ET3100 ET3100 ET3100 ET3100
maximum up to 16 units of ET3100 per bus (1KM)
#1 #2 #3 #16
WAN / LAN
Hub ET3100L
Hub
TCPIP
ET3100 LAN Configuration
ET-3100-L01
Elid Time Attendance Software
communicator
E.SDK Time Attendance Software Development ToolE.SDK is a set of interface tools which allows the developers to develop their software using ELID’s Time Recording Terminals (ET1200 series, ET630, ET636 & ET3100). It allows integration with various software, making it versatile for many reasons. The E.SDK consists of 2 parts: DLL and GUI
Highlights of DLL and GUI
Synchronizes the time clock date and time with the PC date and time
Downloads transactions from the time clockInstalls and deletes the card number from the time clock
Uploads, downloads and deletes fingerprint templates from the time clockTime clock settings: set sounder, set session, etc
System Requirement
Processor Pentium IV or higher
Operation System Microsoft Windows 2000/XP or higher
RAM 64MB or higher
HDD 10 M (Installation)50 M (Operation)
Comm. Port 1
Printer Port 1
Display 800 x 600 (16 colours) or higher
Dynamic Link Library (DLL)The Dynamic Link Library provides an Application Program Interface (API) prepared for development of the PC application that integrates the time clock functionalities.It supports various development tools: Microsoft Visual Basic 6.0 (or above), Borland Delphi, etc. The E.SDK provides sample coding in Delphi Programming language and Visual Basic Programming language.
Graphical User Interface Application (GUI)The Graphical User Interface Application on the other hand is a simple polling software. It provides an output file in text file format. Integration can be done through the output text file (*.dat).
Ordering Information
EW-ESDK-000 E.SDK Software Development Tool (DLL, GUI) for Elid Time Recording Terminal in CD only
E.SDK Standard Configuration (RS485)
E.SDK
CV4823
RS232
ET630 ET3100 ET630
#1 #2 #16
Maximum Time Clock= 16 units
E.SDK Standard Configuration (Multidrop)
E.SDK
EL70T
RS232
ET12XX ET12XX ET12XX
#1 #2 #16
Maximum Time Clock= 16 units
Multidrop
RS485
E.SDK LAN Configuration
Hub
E.SDK
WAN/LAN
HubET3100L
EL78AET12XX
Hub
Hub EL70LET630
Maximum Time Clock= 16 units
ETWIN Time Clock Interface SoftwareETWIN is meant for users who have their own Time Attendance software, but do not wish to write polling routines to communicate with ELID’s Time Recording Terminals. ETWIN only works with ET1200 series. It provides an output file in text file format. Integration can be done through the output text file (LatestTrans.dat).
Standard, Modem & Terminal Server version are available in ETWIN.
Ordering Information
EK-021T-RK1 ETWIN V2 /1 Time Clock Interface Software, Standard Version, support 64 clocks in CD (with ET21 Rockey, USB)
EK-022T-RK1 ETWIN V2 /2 Time Clock Interface Software, Standard + Modem Version, support 64 clocks in CD (with ET22 Rockey, USB)
EK-023T-RK1 ETWIN V2 /3 Time Clock Interface Software, Standard + Modem + Terminal Server Version, support 64 clocks in CD (with ET23 Rockey, USB)
ETWIN Standard Configuration
RS232 Multidrop
#1 #2 #16
ET12XX ET12XX ET12XX
ET12XX ET12XX ET12XX
#17 #18 #32
Multidrop
RS232
RS232
Multidrop
#33 #34 #48
ET12XX ET12XX ET12XXMultidropRS232
ET12XX ET12XX ET12XX
Maximum Time Clock = 64 units
EL70T
EL70T
EL70T
EL70T#49 #50 #64
ETWIN
ETWIN Modem Configuration
#2 #16
Maximum Time Clock = 64 units
ETWIN modemmodem EL70B
#1
#18 #32
modem EL70B
#17
#34 #48
modem EL70B
#33
#50 #64
modem EL70B
#49
ETWIN LAN Configuration
WAN/LAN
#2 #16#1
#18 #32#17
#34 #48#33
#50 #64#49
Multidrop
Multidrop
Multidrop
Multidrop
Multidrop
Multidrop
Multidrop
Multidrop
EL78A
EL78A
EL78A
EL78A
EL12XX EL12XX EL12XX
EL12XX EL12XX EL12XX
EL12XX EL12XX EL12XX
EL12XX EL12XX EL12XX
EL12XX EL12XX EL12XX
EL12XX EL12XX EL12XX
EL12XX EL12XX EL12XX
EL12XX EL12XX EL12XX
Hub
Hub
Hub
Hub
TCP/IP
TCP/IP
TCP/IP
TCP/IP
ETWIN
Maximum Time Clock = 64 units
Chronos Single-shift Time Attendance Software Chronos is a Window-based user friendly time attendance software written to monitor staff attendance effectively. Chronos works with all Elid Time Clocks and provides numerous reports on staff’s attendance status as well as exporting clock data to third party payroll system.
Highlights of Chronos
Provides a startup wizard which leads the user to complete the basic settingsImplement access right to prevent unauthorized access
System Requirement
Processor Pentium IV or higher
Operation System Microsoft Windows 2000/XP or higher
RAM 128 MB or higher
HDD 30 MB (Installation)100 MB (Operation)
Comm. Port 1
Printer Port 1
Display 800 x 600 (16 colours) or higher
Provides real-time activity monitoring, which means In and Out transactions are reported immediately and displayed on Chronos20 predefined reports to record employees’ attendance
Provides leave management to record leave taken
Attendance of employees can be edited by the administrator
Provides a comprehensive audit trail reports of administrator/user’s actions
Employee’s information and clocks data in Excel file or text file can be imported to Chronos’s database for attendance reprocessing
Ordering InformationEW-CNOS-000 Chronos Time Attendance Management
Software in CD only, Single-shift, Standalone
Company name and logo can be personalized
Support user definable staff database and user photo images
Language Support: English, Malay, Chinese Simplified, Chinese Traditional, Thai
Attendance Records can be exported to Excel file (.xls) or text file (.txt) which can be used for integration with third party payroll software to generate salary
Chronos Standard Configuration
Chronos
CV4823
RS232
ET630
RS485
Chronos
RS232 Multidrop
EL70T
ET12XX
RS232 RS485
ET3100Chronos
Chronos ET636
USB cable
CV4823
Maximum Time Clock = 1 unit
OnTime Single-shift Time Attendance SoftwareOnTime Time Management Software is a Windows-based software which works with ET1200 series Time Recording Terminals. The software allows clock data in the time recording terminals to be uploaded to the PC, and processed to generate attendance and overtime reports. These reports can also be exported for use by third party payroll software to generate overtime pay.
Highlights of OnTime Implement access right to prevent unauthorized accessMore than 7 predefined reports to record employees’ attendance
System Requirement
Processor Pentium II or higher
Operation System Microsoft Windows 98 or higher
RAM 64 MB or higher
HDD 3 MB (Installation)50 MB (Operation)
Comm. Port 1
Printer Port 1
Display 800 x 600 (16 colours) or higher
Provides leave management to record leave takenAttendance Records can be exported to text file (.txt) which can be used for integration with third party software
Employee’s information and clocks data in text file can be imported to OnTime’s database for attendance reprocessing
Company name and logo can be personalizedSupport user definable staff database
Language Support: English
Ordering InformationEK-010T-001 OnTime Time Attendance Software,
Single-Shift, unlimited users in CD (with ET10 Softkey, DB9)
OnTime Standard Configuration
EL70T
RS232 Multidrop
OnTime
ET12XX ET12XX ET12XX ET12XX
#1 #2 #3 #16
Maximum Time Clock= 16 units
EasyTime Single-shift Time Attendance SoftwareEasyTime is a Window-based software written to monitor staff attendance effectively and conveniently for ET630 and ET636 Time Recording Terminal. EasyTime provides numerous reports on staff’s attendance status as well as exporting clock data to third party payroll system.
Highlights of Easy Time Implement access right to prevent unauthorized access
More than 7 predefined reports to record employees’ attendance
System RequirementProcessor Pentium III or higher
Operation System Microsoft Windows 98 or higher
RAM 128 MB or higher
HDD 10 MB (Installation)50 MB (Operation)
Comm. Port 1
Printer Port 1
Display 800 x 600 (16 colours) or higher
Provides leave management to record leave taken
Attendance Records can be exported to Excel file (.xls) or text file (.txt) which can be used for integration with third party softwareEmployee’s information and clocks data in text file or excel file can be imported to EasyTime’s database for attendance reprocessingCompany name and logo can be personalized
Support user definable staff database and user photo images
Language Support: English
Ordering InformationEW-ETD0-000 EasyTime Time Attendance Software (Single-shift)
for ET630 & ET636 in CD only
EasyTime Standard Configuration (RS485)
EasyTime
RS232
ET630 ET630 ET630
#1 #2 #9
Maximum Time Clock= 9 units
RS485
EasyTime Standard Configuration (USB)
EasyTime
Maximum Time Clock= 1 unit
USB
CV4823
ET636
E.Time Multiple-shift Time Attendance SoftwareE.Time is a Windows based Time Attendance Management software, designed to works with all Elid Time Clocks and monitor staff attendance effectively. It is suitable for use in a factory environment to track shift functions accurately
Highlights of E.Time
Provides a startup wizard which leads the user to complete the basic settingsImplement access right to prevent unauthorized access
System Requirement
Processor Pentium IV or higher
Operation System Microsoft Windows 2000/XP or higher
RAM 128 MB or higher
HDD 30 MB (Installation)100 MB (Operation)
Comm. Port 1
Printer Port 1
Display 800 x 600 (16 colours) or higher
Provides group scheduling and individual scheduling that helps divide employees into different working schedulesProvides real-time activity monitoring, which means In and Out transac-tions are reported immediately and displayed on E.Time 21 predefined reports to record employees’ attendance
Provides leave management to record leave taken
Attendance of employees can be edited by the administratorProvides a comprehensive audit trail reports of administrator/user’s actions
Ordering InformationEW-TIME-U01 E.Time Time Management Software,
100 users (with Softkey, DB9)
Attendance Records can be exported to Excel file (.xls) or text file (.txt) which can be used for integration with third party payroll software to generate salary
Employee’s information and clocks data in Excel file or text file can be imported to E.Time’s database for attendance reprocessing
Provides a migration tool for the existing users of EasyTime who wish to upgrade the time attendance software from EasyTime to E.Time
Company name and logo can be personalized
Support user definable staff database and user photo images
Language Support: English, Malay, Chinese Simplified, Chinese Traditional, Thai, Self-define
EW-TIME-U02 E.Time Time Management Software, 500 users (with Softkey, DB9)
EW-TIME-U03 E.Time Time Management Software, 1000 users (with Softkey, DB9)
EW-TIME-U04 E.Time Time Management Software, unlimited users (with Softkey, DB9)
Optional Software Modules for E.Time:
EW-TIME-M01 E.Time LAN Module (program with E.Time basic software)
E.Time
RS485
Multidrop
E.Time Standard Configuration
Maximum Time Clock = 16 units
E.Time LAN Configuration
Maximum Time Clock = 16 units
Software Key
EL70D/EL70U
Hub
E.Time WAN/LAN
Hub ET3100L
EL78AET12XX
Hub
Hub EL70LET630
Multidrop
RS485
TCP/IP
E.Time System Configuration
Maximum Time Clock = 16 units
RS232
Software Key
EL70D/EL70U
HubE.Time
Hub ET3100L
EL78AET12XX
Hub
Hub EL70L ET630
Multidrop
RS485
TCP/IP
ET12XX ET3100 ET630
E.Time
WAN/LAN
RS485
Multidrop
ET12XX ET3100 ET630
EL70D/EL70U
OnTime Plus Multiple-shift Time Attendance SoftwareOnTime Plus is a Windows based Time Attendance Management software, designed to work with all Elid Time Clocks, for use in a factory environment to track shift functions accurately. It enhances and concentrates on collecting, processing, storing and analyzing of clock data, and provides comprehensive attendance reports, and reports that specifically customized by users.
Building up with a LAN ready mechanism, it allows for multiple workstations /multiple users. It prevents unauthorized access and limits the operator to designated functions only with implementation of access rights.
Highlights of OnTime PlusUp to 25 workstations are available in the OnTime Plus, access the system anywhere in the networkImplement access rights to prevent unauthorized access and limits the users to designated functions onlyProvides a Web enable attendance enabling the attendance reports to be viewed anywhere at anytime easilyAn user-friendly interface with the tree view on staff managementProvides multiple-shift scheduling and individual scheduling that helps divide employees into different working schedulesProvides real-time activity monitoring, which means In and Out transactions are reported immediately and displayed on OnTime Plus or redirected to a printer connected to the PCUser-defined reports and more than 20 predefined reports to record employees’ attendance
Provides leave management to record leave taken
Attendance of employees can be edited by the administrator
Provides a comprehensive audit trail reports of administrator/user’s actionsAttendance Records can be exported to text file (.txt) which can be used for integration with third party payroll software to generate salaryEmployee’s information and clocks data in text file or Excel file can be imported to OnTime Plus’s database for attendance reprocessingCompany name and logo can be personalizedSupport user definable staff database with photo images
Language Support: English, Chinese
System Requirement
Processor Pentium IV or higher
Operation System Microsoft Windows 2000/XP or higher
RAM 128 MB or higher
Hard Disk Space 10 MB (Installation)200 MB (Operation)
Comm. Port 1
Printer Port 1
Display 800 x 600 (16 colours) or higher
OnTime Plus Standard Configuration
RS232 Multidrop
EL70T
ET12XX ET12XX ET12XX ET12XX
CV4823
ET630 ET630 ET630 ET630
RS485
#1 #2 #3 #16
#17 #18 #19 #32
CV4823
ET630 ET630 ET630 ET630
RS485#33 #34 #35 #46
RS232 Multidrop
EL70T
ET12XX ET12XX ET12XX ET12XX
#47 #48 #49 #64
Maximum Time Clock = 64 units
WAN/LAN
Hub
workstation #1
OnTime Plus
OnTime Plus
workstation #2
workstation #3
workstation #4
Hub OnTime Plus
Hub OnTime Plus
Hub OnTime Plus
Ordering InformationEK-032T-RK1 OnTime Plus/3 Time Attendance Software, unlimited users, up to 4 workstations in CD (with ET32
Rockey, USB)
EK-034T-RK1 OnTime Plus/4 Time Attendance Software, unlimited users, up to 10 workstations in CD (with ET34 Rockey, USB)
EK-035T-RK1 OnTime Plus/5 Time Attendance Software, unlimited users, up to 25 workstations in CD (with ET35 Rockey, USB)
ER928Mifare Smart Card Reader
Ordering Information
The ER928 is a Mifare ® Contactless Smart Card reader with built-in antenna. ER928 interfaces with external equipment via Wiegand signals.
Technical Specifications
Reader Type Mifare
Colour Beige
Power 12VCurrent Consumption 150mA RF Frequency 13.56 Mhz
Reading Range 1-5cm
Output Format Wiegand, Free Wiegand
Status indication By LED and beeper
Dimension 110(H)x44(W)x35(D) mm
Weight
ER-0928-G06 ER928/G Mifare Contactless Card Reader, Beige (Wiegand 26/32 bits), 1-5 cm reading range, 200g
ER-0928-E06 ER928/E Mifare Contactless Card Reader, Beige (Wiegand Interface 40 bits, EMS Format), 3-5 cm reading range, 300g
200-300g
ERH23LHID Proximity Reader
Ordering InformationER-0023-0M7 ERH23L Short Range Proximity Reader, Black
(HID compatible)
This is a Short-range Proximity reader which reads all HID cards. It can be unobtrusively mounted on door mullions.
Technical SpecificationsReader Type HID
Colour Black
Power 5VCurrent Consumption 50 mATransmit Frequency 125 Khz
Reading Range Up to 5 inches
Output Format Wiegand
Status indication By LED and beeper
Dimension 120(H)x44(W)x20(D) mm
Weight
ERH923This is a Short-range Proximity reader which reads all HID cards. The plastic housing is designed to match with EK9S Keypad.
Technical SpecificationsReader Type HID
Colour Beige
Power 5VCurrent Consumption 50 mATransmit Frequency 125 Khz
Reading Range 3cm to 5cm
Output Format Wiegand
Status indication By LED and beeper
Dimension 110(H)x44(W)x35(D) mm
Weight
Ordering InformationER-0923-0M2 ERH923 Short Range 5 cm Proximity Reader,
Beige (HID compatible)
200g
300g
HID Proximity Reader
ERM23EM Proximity Reader
Ordering InformationER-0023-006 ERM23 Short Range Proximity Reader, Black (EM
compatible)
This is a Short-range Proximity reader which will reads all EM cards.
Technical Specifications
Status indication
Dimension
Weight
ERM923This is a Short-range Proximity reader which reads all EM cards. The plastic housing is designed to match with EK9S Keypad.
Ordering InformationER-0923-006 ERM923 Short Range Proximity Reader, Beige (EM
compatible)
Reader Type EM
Colour Black
Power 5VCurrent Consumption
50 mA
Transmit Frequency
Reading Range
Output Format WiegandBy LED and beeper
120(H)x44(W)x20(D) mm
Technical Specifications
Status indication
Dimension
Weight
Reader Type EM
Colour
Power 5V
Current Consumption
50 mA
Transmit Frequency
Reading Range
Output Format Wiegand
By LED and beeper
Beige
Between 3cm to 5cm
110(H)x44(W)x35(D) mm
ER-0923-E07 ERM923/E Short Range Proximity Reader, Beige (EM compatible, ELID Format)
200g125 Khz
200g125 Khz
EM Proximity Reader
Between 3cm to 5cm
ERM823EM Proximity Reader
Ordering InformationER-0823-G06 ERM823/B Short Range Proximity Reader, Black (EM
compatible)
The ERM823 is a waterproofed Short-range Proximity reader, compatible with all ELID access controllers
Technical Specifications
Status indication
Dimension
Weight
Reader Type EM
Colour Black or Silvery White
Power 5VCurrent Consumption
80 mA
Transmit Frequency
Reading Range Between 3cm and 8cm
Output Format Wiegand
By LED and beeper
85(H)x45(W)x15(D) mm
Waterproof
ER-0823-G07 ERM823/S Short Range Proximity Reader, Silvery White (EM compatible)
200g125 Khz
Protection
EK9SThe EK9S is compatible with all ELID Access Controllers, and is often used in conjunction with various types of readers. Only 8 wires are used for both scanning keypad and displaying status.
Ordering InformationER-0009-001 EK9S Serial Keypad (Rubber) with 4x7 Segment
Display, Beige
Technical Specifications
Keypad
Keypad 12-key membrane keypad
Display 4x7segment LED display
Colour Beige
Power 5V
Current Consumption 50 mA
Status indication beeper
Protection Surge protection
Operating Temperature 0°C to 40°C
Dimension 110(H)x90(W)x35(D) mm
Weight 300g
ER35Bar Code Reader
Ordering InformationER-0035-002 ER35 Reader, Infra Red Bar Code Swipe in Stainless
Steel
This is an Infra-red Swipe-type Bar Code reader housed in a metal casing. It is designed to work with EL22XX Door Access Controllers and ET12XX Time Recording Terminals, and will read bar code cards encoded in 3-of-9 format or ELID 2-of-5 interleaved format.
Technical SpecificationsReader Type Bar Code
Power
Current Consumption
Resolution Medium (0.19 mm)
Reading Range Reliable reading over wide speed range
Status indication By LED and beeper
Dimension
Weight
40(H)x35(L)x120(W) mm
ER36
Ordering InformationER-0036-001 ER36 Reader, Infra Red Bar Code Swipe c/w Keypad
in Plastic Housing
This is an Infra-red Swipe-type Bar Code reader housed in a plastic casing. It will work with EL22XX Door Access Controllers, and read bar code cards encoded in 3-of-9 format or ELID 2-of-5 interleaved format.
12-key membrane keypad
Display
Reader Type
Colour
Resolution
Output Format
Status indication
Power
Current Consumption
Reading Range Reliable reading over wide speed range
Dimension
Weight
120(H)x120(L)x50(W) mm
2 LED status display
Bar Code
Medium (0.19 mm)
By LED and beeper
Output Format
Technical SpecificationsKeypad
5V
50 mA
3-of-9 format or ELID 2-of-5
400g
Beige & Grey
5V
50 mA
400g
3-of-9 format or ELID 2-of-5
Bar Code Reader
ER36BBar Code Reader
Ordering InformationER-0036-002 ER36B Reader, Infra Red Bar Code Swipe w/o Keypad
in Plastic Housing
This is an Infra-red Swipe-type Bar Code reader housed in a plastic casing together with 2 LED status display. It will work with EL22XX Door Access Controllers, and read bar code cards encoded in 3-of-9 format or ELID 2-of-5 interleaved format.
Technical Specifications
Reader Type Bar Code
Colour
Power
Current Consumption
Resolution Medium (0.19 mm)
Reading Range Reliable reading over wide speed range
Status indication By LED and beeper
Dimension
Weight
120(H)x120(L)x50(W) mm
ER5S
Ordering InformationER-0005-008 ER5S Serial Swipe Reader, Keypad & 4x7 Segment
Display for EL2200/05 in Plastic Housing c/w 1 set of Master Card (Magnetic Hico)
This is a Magnetic reader housed in a plastic casing. Communication to controller is by 8 wires.
12-key membrane keypad
Display
Reader Type
4x7-segment LED status display
Swipe-type Magnetic reader, track 2 (Other tracks also available)
Output Format
Technical SpecificationsKeypad
Magnetic Reader
Colour
Power
Current Consumption
Reading Range Wide reading speed range of 100-1500 mm/s
Output Format
Status indication
Weight
Dimension 120(H)x120(L)x50(W) mm
By LED and beeper
Beige & Grey
5V
50 mA
3-of-9 format or ELID 2-of-5
400g
5V
50 mA
ATA
400gBeige
ER5SB
Biometric Reader
This is a Magnetic reader, without keypad, housed in a plastic casing. Communication to controller is by 7 wires.
HR-CR Handkey
Ordering InformationER-0005-010 ER5SB Exit Reader w/o Keypad for EL2200/05 in
Plastic Housing
The HR-CR Handkey is specifically designed to work in conjunction with card-based access control systems. The unit’s card reader port allows the use of either a card for ID number input or use via an integrated keypad.
Reader Type Swipe-type Magnetic reader, track 2 (Other tracks also available)
Technical Specifications
Magnetic Reader
Colour
Power
Current Consumption
Output Format
Status indication
Weight
Dimension 120(H)x120(L)x50(W) mm
Reading Range Wide reading speed range of 100-1500 mm/s
Technical Specifications
Verification Time Less than 1 second
Template Size 9 bytes
Power 12-24 VDC or VAC
ID Number 1 to 10 digits from keypad or card reader
User Capacity 512 users standardInternally expandable to 32,512
Card Reader Input/ Emulation Standard format of either Wiegand/Proximity: 26-bit (8-bit facility code), Magnetic Stripe and Bar Code
Communications RS-485 (4-wire and 2-wire), RS-232
Baud Rate 1,200 to 28.8K bps
Dimension 29.6(H)x21.7(L)x22.3(W) cm
Weight 2.7kg
Ordering InformationER-1000-001 Handkey CR - Palm Scan Reader for 512 users c/w
Handnet Light Software EA-1000-801 EM-801 Memory Expansion for 9,728 users (Handkey
CR)
By LED and beeperBeige
5V
50 mA
ATA
400g
EL70TThe EL70T is a single bus Multi-drop to RS232 interface converter, allowing PC to be linked to 16 controllers with maximum distance of 1 KM. It is equipped with lightning protection devices. The unit has no slot for inserting software key (dongle), and so cannot be used where the software requires validation.
Communicator
Conversion circuitry: 1x Multi-drop to 1 x RS232 interface conversion circuitry
Dimensions: 125(H) x 113(W) x 50(D) mm
Ordering InformationEL-0070-004 EL70T Communicator, Serial c/w 0.5A
Transformer, 5.5ft AC Cable & Serial Cable in Metal Housing
EL70BSThe EL70BS is a single bus Multi-drop to RS232 interface converter, allowing PC to be linked to 16 controllers with maximum distance of 1 KM. It is equipped with lightning protection devices. The unit is similar to the EL70T, but has a slot for inserting software key (dongle), and so can be used where the software requires validation.
Conversion circuitry: 1x Multi-drop to 1 x RS232 interface conversion circuitrySoftware key slot: Available for inserting ELID software key
Ordering InformationEL-0070-021 EL70BS Communicator, Serial c/w 0.5A
Transformer, 5.5ft AC Cable & Serial Cable in Metal Housing
EL70DThe EL70D is similar to the EL70BS, but provides the option of either Multi-drop or RS485. It will convert either half duplex RS485 or Multi-drop to RS232 allowing PC to be linked to 16 controllers with maximum distance of 1 KM. It also has a slot for software license key (dongle).
Conversion circuitry: 1x Multi-drop or RS485 to 1 x RS232 interface conversion circuitrySoftware key slot: Available for inserting ELID software license key
Ordering InformationEL-0070-G23 EL70D Communicator, Serial to Multidrop /
RS485, PS Adapter 13.5/1.5A & Serial Cable in Metal Housing
Weight: 1kg
Dimensions: 125(H) x 113(W) x 50(D) mmWeight: 1.2 kg
Dimensions: 78(H) x 125(W) x 30(D) mm
Weight: 800g
Communicator
Communicator
Software key slot: None
EL70UThe EL70U is similar to the EL70D. It will convert either half duplex RS485 or Multi-drop to USB allowing PC to be linked to 16 controllers with maximum distance of 1 KM. It also has a slot for software license key (dongle).
Communicator
Conversion circuitry: 1x Multi-drop or RS485 to 1 x USB interface conversion circuitrySoftware key slot: Available for inserting ELID software license key
Ordering InformationEL-US70-G01 EL70U Communicator, USB to RS485, USB Cable
in Metal Housing (Optional: USB to Multidrop with Power Supply Adapter)
EL38The EL38 is a single bus RS485 (4-wire) to RS232 interface converter, allowing PC to be linked to 16 controllers with maximum distance of 1 KM. It is equipped with lightning protection devices. The EL38 has a slot for inserting software key (dongle), and so can be used where the software requires validation.
Conversion circuitry: 1x RS485 (4-wire) to 1 x RS232 interface conversion circuitrySoftware key slot: Available for inserting ELID software key
Ordering InformationEL-0038-001 EL38 Communicator c/w 9 to 9 Serial Cable &
Adapter in Metal Housing
Dimensions: 78(H) x 125(W) x 30(D) mm
Weight: 600g
Dimensions: 78(H) x 125(W) x 30(D) mm
Weight: 900g
Communicator
LAN Terminal Server
EL78A It is a mediating communication device between PC and ELID controllers for a small scale networked configuration on an Ethernet local area network. The communicator converts TCP/IP to RS485 (4-wire)/Multi-drop/RS232 signals or vice versa.
Ordering InformationEL-0078-002 EL78A LAN Terminal Server c/w RS232 Cable &
Adapter in Metal Housing
Dimensions: 78(H) x 125(W) x 30(D) mm
Weight: 1kg
EL70L It is a mediating communication device between PC and ELID controllers for a small scale networked configuration on an Ethernet local area network. The communicator converts TCP/IP to RS485/Multi-drop/RS232 signals or vice versa.
Ordering InformationEL-TS70-001 EL70L LAN Terminal Server c/w RS232 Cable &
Adapter in Metal Housing (For Software Key 2)
Dimensions: 78(H) x 125(W) x 30(D) mmWeight: 600g
LAN Terminal Server
CV4823The CV4823 is designed to convert RS232 communication signals to RS485 communication signals or vice versa.
Converter
Ordering Information
EG-4823-CV2 CV4823 Converter c/w RS232 Cable (RS485 - RS232), 200g
EA48The EA48 is designed to convert Wiegand communication signals to RS232 communication signals or vice versa.
Ordering InformationEA-0048-001 EA48 Multiple Format Converter in Metal
Housing c/w 9 to 9 Cable, Adaptor & Power Cord
EA52The EA52 is designed to convert Mulit-drop/RS485 signals to RS232 communication signals.
Ordering InformationEA-0052-001 EA52 Multidrop RS485/RS232 Converter in
Metal Housing
Dimensions: 78(H) x 115(W) x 30(D) mm
Weight: 500g
Dimensions: 78(H) x 132(W) x 30(D) mm
Weight: 900g
Converter
Converter
Ordering InformationEC-0001-100 Magnetic Card, Plain White, HiCo
Magnetic Card
HID Card
Ordering InformationEC-0021-02U Proximity Card II 1326, Thick Card, ELID
Format, Plain White
EM Card
Ordering InformationEC-0021-E02 Proximity Card (EM compatible), Thick Card,
Plain White
EC-0002-10U Hico Magnetic Card, ELID Logo, User
EC-0021-01U Proximity Card II 1326, Thick Card, 26-bit Wiegand Format, Plain White
EC-0024-00U ISOProx II 1386, Credit Card Size (Thin), User (Vinyl), 26-bit
EC-0024-02U ISOProx II 1386, Credit Card Size (Thin), User (Vinyl), ELID Format
EC-0024-E02 Proximity Card (EM compatible), Thin Card, Credit Card Size, Plain White
Mifare Card
Ordering InformationEC-0008-4L1 Mifare Contactless Smart Card (EMS Format),
Plain White
EC-0008-HL1 Mifare Contactless Smart Card, Plain White
EP1515Transformer
Ordering InformationEP-0001-003 EP1515 Transformer c/w Varistor 15VAC/1.5A
(w/o Metal Housing, for EL1300)Weight: 1kg
Power SupplyEP23
Ordering InformationEP-0023-003
This is a 12V/2.5A switching power supply in metal casing, with separate charger output for charging lead acid battery.
EP23S Power Supply, 12V/2.5A Switching c/w PS2 Weight: 400g
EP33This is a 12V/3A linear power supply in metal casing, with separate charger output for charging lead acid battery. The EP33 is further provided with low-volt cut off relay which will disconnect battery from equipment when voltage falls below a specified value.
Ordering InformationEP-0033-001 EP33 Charger, 12V/3.0A with Low Volt Cut-off c/w
3A Transformer in Metal HousingDimensions: 256(H)x285(W)x74(D) mmWeight: 2.7kg
EP30SThis is a 12V/3.0A switching power supply in metal casing, with separate charger output for charging lead acid battery.
Ordering InformationEGPS30002 EP30S Power Supply, 12V/3.0A Switching
c/w PS2 (without Metal Housing)Weight: 900g
Power Supply
Power Supply
Power Supply Adapter
Metal Casing
Ordering Information
CS-1056X Metal Casing for EL13XXDimensions: 256(H)x285(W)x74(D) mmWeight: 1.9kg
CS-1098X Metal Casing for EL2205/2207Dimensions: 381(H)x330(W)x91(D) mmWeight: 4.8kg
EP15SThis is a 13.5V/1.5A switching power supply in a plastic molded casing. It is supplied with a low-volt cut off sensing circuit PS2.
Ordering InformationEG-PSA1-002 EP15S Power Supply Adapter, 13.5V/1.5A
c/w PS2, Desk-top StyleWeight: 400g
Buffer EA5A
Ordering InformationEA-0005-001
The EA5A is a signal extension board for EK9S Keypad.
EA5A Buffer (w/o Metal Housing)Weight: 100g
EA8The EA8 is a relay interface unit which consists of 6 outputs and 2 inputs.
Ordering InformationEA-0008-001 EA8 Relay Interface Unit (w/o Metal Housing)
Weight: 200g
Relay Interface Unit
ELID SDN BHDNo. 19, Jalan 223, 46100 Petaling Jaya, Selangor, Malaysia
+603-7960 9695
+603-7960 6761
www.elid.com
Address
Telephone Number
Facsmile Number
Email Address
Website