PRODUCT CATALOG - Maretron 2007 Catalog.pdf · 2017-04-19 · PRODUCT CATALOG 2007. Maretron designs, ... fuel economy and reduced wear and tear on your autopilot since S-turning

Maretron Corporate Office9014 N. 23rd Avenue, Suite 10 • Phoenix, AZ 85021Phone: 602-861-1707 • Fax: 602-861-1777

Email: [email protected] • Web: www.maretron.com

PRODUCT CATALOG 2007

Maretron designs, manufactures and markets leading-edge networked electronics for the marine marketplace.Maretron’s products are designed to the open industryNMEA 2000® standard, which allows electronic equipmentfrom diverse manufacturers to be networked together forsharing information throughout the vessel. Maretron’scorporate philosophy is to provide premium quality, state-of-the-art marine electronics that work in conjunction withtraditional navigation techniques for the highest level ofsafety and performance while boating.

Contents

PC Software/Interfacing

Display Products

Navigation Instruments

Engine/Vessel Monitoring

Cables and Connectors

Network Installation Guide

2007PRODUCTCATALOG

www.maretron.com

World-class standards innavigational and vesselmonitoring electronics.Simpler, safer boating. Freedom of choice. Those are theguiding principles behind Maretron.

All the products we develop are designed to perform in theopen plug-and-play network, the National Marine ElectronicsAssociation standard (NMEA 2000®). Why? Because noother network provides the same degree of flexibility, allowingyou to buy best-in-class instrumentation – no matter whomanufactures it.

Maretron was founded by engineers who designed integrated circuits for the automotive industry. No otherindustry has perfected networked electronics to the samedegree. Avid boaters, they saw a unique opportunity totransport this technology to marine electronics.

The result? A growing line of networked products that installsimply and perform with increased reliability. Products thatallow you the freedom of choice to select components fromyour favorite brands of electronic components.

Maretron. We may be the newest name in marine electronics,but we intend to lead the way to simpler, safer boating.

www.maretron.com

The NMEA 2000® standard is aserial data communicationsnetwork for interconnectingmarine electronic equipment

where all data is transferred overa single network cable. Maretronis leading the way by introducing

the first “NMEA 2000® Approved”connectors and cables.

Maretron’s SSC200 is a solid staterate gyro compass with no movingparts and, unlike a flux gate compassthat sloshes around during turns orpitching seaways, the SSC200continues to provide accurate headinginformation. The result is increasedfuel economy and reduced wear andtear on your autopilot since S-turningabout the desired course is reduced.

Maretron’s GPS100 is a globalpositioning systemantenna/receiver thatincorporates the latest WAAStechnology for accurate positionfixes. The GPS100 connectsdirectly to an NMEA 2000®

network and communicates withnavigational software, chartplotters, autopilots anddedicated instrument displaysand its compact, waterproofhousing provides years ofreliable performance.

Maretron’s DST100 Smart™ RetractableDepth/Speed/Temperature Transducer delivers

precise digital depth, accurate speed and exactwater temperature even at speeds above 40 knots.

Maretron’s TLA100 is used to adapt commerciallyavailable resistive tank senders to the NMEA 2000®

network. This allows you to observe tank levelsanywhere on the vessel where there is an NMEA2000® compatible display such as the Maretron

DSM200 or DSM250.

Network topology includessimple tee connections (ordrops) where devices can beconnected or disconnectedfrom the trunk line underpower without disturbing therest of the network.

Single network cableprovides power as wellas communicationsignals which eliminatesthe need for separatepower connections.

Cable connector ends arenickel-plated brass to withstandthe harsh marine environmentand are keyed for error-free connections. Screw threadconnector ends reduce chancesof accidental disconnects ofessential equipment. Allconnections are waterproof andcontinue to work even whilethey are submerged in the bilge.

Maretron’s RAA100 is used to adaptcommercially available resistive rudderangle senders to the NMEA 2000®

network. This allows you to observe rudderangle anywhere on the vessel where thereis an NMEA 2000® compatible displaysuch as the Maretron DSM200 or DSM250.

Maretron products includeengine monitors forconverting newer digitalengine data as well asanalog engine data to anNMEA 2000® format so thedata can be observedanywhere on the vessel withany NMEA 2000® compatibledisplay.

Maretron’s WSO100 is anultrasonic wind and weatherstation that measures wind speedand direction, air temperature,barometric pressure, and relativehumidity. The wind measurementis performed using ultrasonicsensors, which means there areno moving parts to wear out or toget caught in the rigging.

Maretron’s color (DSM250) and monochrome(DSM200) displays are 5.7”,easy to use displays for monitoring any or allNMEA 2000® network dataincluding engine gauges,navigational information,environmental data, tanklevels, and much more.

Trunk Termination Resistor

NMEA 2000to/fromUSBGateway

Computer

Display

Depth/Speed/TemperatureTransducer

Compass

Battery

Tank LevelAdapter

EngineMonitoring

Rudder AngleAdapter

GPS

Radar

WindTransducer

Trunk Termination Resistor

Maretron’s USB100 is a gateway for bridgingUSB equipped computers with the NMEA 2000®

network so you can continue to use PC-basednavigation software or you can view critical

vessel systems using Maretron’s vesselmonitoring software (N2KView).

Maretron brings world-class vesselmonitoring systems to the PC using state ofthe art networking technology. Now you canmonitor all critical vessel systems includingengines, gensets, tanks, rudder, navigationinstruments, local weather, electrical systemsand more, all using an open industry standardfor true plug-and-play compatibility.

Maretron’s USB gateway (USB100) bridges the gap between anNMEA 2000® network and a PC using one simple USB connection.

Maretron’s vessel monitoring and control software(N2KView) provides unprecedented access to all your

vessel’s systems through multiple configurable screens.

PC Software/Interfacing

www.maretron.com

N2KViewVessel Monitoring and Control Software

Windows PC Server/Client System Requirements

Windows Mobile (Smartphones and Pocket PC) Client System Requirements

Parameter Value Comment

Operating System

Windows XP Home Edition/Professional Latest Service Pack may be Required for Support

Vista Latest Service Pack may be Required for Support

CPU Minimum

Pentium

®

4 or Equivalent

CPU Recommended

Pentium

®

4, (3.0 GHz)

Memory Minimum

512 MB RAM

Memory Recommended

1 GB RAM

Hard Drive Space

40 MB More if Voyage Data Recorder is Used

CD-ROM or DVD Drive

Single Required to Load Software

Video Card Minimum

128 MB

Video Card Recommended

256 MB

USB Ports

Two USB Ports – 1.1 or 2.0 Compatible One Port for Software License Key, One for Maretron Gateway

Ethernet Port

10BASE-T or 100BASE-TX, or 80211a/b/g Only Required for Remote Monitoring

Display

1024x768 Resolution, 32-bit Color Video

Multiple Monitor Support

Dedicated Video Cards 64 MB RAM per


Operating SystemWindows Mobile 5.0/6.0 Latest Service Pack may be Required for Support

CPU Minimum200 MHz

CPU Recommended400 MHz

ConnectivityWi-Fi or Cellular Broadband

Memory Recommended64 MB

Environmental View Navigation View Electrical Systems View

Engine View

Whether you are interested in monitoring yourvessel’s systems while underway or remotely fromyour home or office, Maretron’s N2KView softwaredisplays the information you need including engines,gensets, tanks, rudders, navigation instruments,local weather, electrical systems and more.

N2KView is completely user-configurable and you are freeto design different screens to your exact needs while easilyswitching from screen to screen for monitoring all yoursystems. Digital displays, analog gauges, graphic displays,warning lights, bar graphs, all can be configured exactlyhow you want them to be. You can even set the operatinglimits and color bands for analog gauges so you knowwhen things are within limits and when they are not.

Copyright 2007 Maretron, LLP. All rights reserved. As Maretron is constantly improving its products, all specifications are subject to change without notice. Maretron's products are designed to beaccurate and reliable; however, they should be used only as aids to navigation and vessel monitoring, and not as a replacement for traditional navigation and vessel monitoring techniques. A

prudent captain or navigator never relies on a single source for navigation or system monitoring information. “NMEA 2000” is a registered trademark of the National Marine Electronics Association.

Once you connect a PC to the NMEA 2000®

network using the Maretron USB100 gateway(N2KView Server), you can connect other PCsor handhelds (N2KView Clients) usingconventional technology like Ethernet or Wi-Fifor remote viewing of things like tank levelsup on deck while fueling, or for monitoring thevessel’s location anywhere in the world usingan Internet connection back to the boat.

Envi

rom

enta

lM

echa

nica

lEl

ectr

ical

Tran

slat

ed D

ata

Type

s(N

MEA

200

0® to

NM

EA 0

183)

Cert

ifica

tions

Spec

ifica

tions

Parameter Type Comment

NMEA 2000

®

Standard Level A Highest Level of Certification

NMEA 2000

®

Connector DeviceNet Micro-C Industry Standard Waterproof

NMEA 2000

®

/ USB Isolation Opto-Isolated No Electrical Connection Across Bridge

USB Standard USB 1.1

USB Connector USB Type B Industry Standard Waterproof

USB Supported Signals D+, D-, +5V, GND Bi-directional Gateway

USB Auxiliary Power +5 Volts < 50mA

USB Baud Rate Up to 12 MB/s Full Speed USB Data Rate

USB Interface Modes

NMEA 0183 With Maretron-supplied Windows

®

Drivers

Native NMEA 2000

®

With Maretron-Supplied API

Standard Comment

NMEA 2000

®

Level A

Maritime Navigation and Radiocommunication Equipment & Systems IEC 60945

FCC and CE mark Electromagnetic Compatability

Instrument Type Data Types

Battery Monitor Voltage, Current, Temperature

Compass Vessel Heading, Attitude, Rate of Turn

Depth Water Depth, Transducer Offset

GPS COG, SOG, DOP, Position, Satellites, Time

Primary Navigation XTE, BTW, DTW, TTG, BOD

Rudder Indicator Rudder Position

Speed Distance Log, Speed

Weather Station Water Temp, Air Temp, Atmospheric Pres

Wind Wind Direction and Speed


Operating Voltage 9 to 16 Volts DC Voltage

Power Consumption < 150mA Average Current Drain

Load Equivalence Number (LEN) 3 NMEA 2000

®

Spec. (1 LEN = 50mA)

Reverse Battery Protection Yes Indefinitely

Load Dump Protection Yes Energy Rated Per SAE J1113


Size 4.50” x 3.30 x 2.09” Including Flanges for Mounting

Weight 6 Oz. Including Flanges for Mounting

Parameter Value

IEC 60945 Classification Exposed

Degree of Protection IP66

Operating Temperature -25°C to 55°C

Storage Temperature -40°C to 70°C

Relative Humidity 93%RH @ 40°C per IEC 60945-8.2

Vibration 2-13.2Hz @ ±1mm, 13.2-100Hz @ 7m/s² per IEC 60945-8.7

Rain and Spray 12.5mm Nozzle @ 100liters/min from 3m for 30min per IEC 60945-8.8

Solar Radiation Ultraviolet B, A, Visible, and Infrared per IEC 60945-8.10

Corrosion (Salt Mist) 4 times 7 days @ 40°C, 95%RH after 2 hour Salt Spray per IEC 60945-8.12

Electromagnetic Immunity Conducted, Radiated, Supply, and ESD per IEC 60945-10

Safety Precautions Dangerous Voltage, Electromagnetic Radio Frequency per IEC 60945-12

Maretron’s USB100 is a gateway for bridging computersto an NMEA network. This allows you to use PC based vessel monitoring and control software like Maretron’sN2KView or PC based navigation software. The gatewayprovides one simple connection between the networkand the PC, which eliminates conventional multiplexersand the maze of wires usually associated with interfacing equipment to PCs.

For older PC based navigation software that requirereceiving data in NMEA 0183 format, the USB100automatically converts information from the NMEA 2000®

network to NMEA 0183 sentences. You can continuebenefiting from navigational and charting software thatyou already own while enjoying the many benefits ofnetworked NMEA 2000® instruments.

Maretron’s USB100gateway bridges the gapbetween NMEA 2000®

networks and PC’sequipped with a USB port.You can continue benefitingfrom navigational andcharting software that youalready own while enjoyingthe many benefits ofnetworked instruments.

USB100NMEA 2000®

USB Gateway

www.maretron.comCopyright 2007 Maretron, LLP. All rights reserved. As Maretron is constantly improving its products, all specifications are subject to change without notice. Maretron's products are designed to be

accurate and reliable; however, they should be used only as aids to navigation and vessel monitoring, and not as a replacement for traditional navigation and vessel monitoring techniques. Aprudent captain or navigator never relies on a single source for navigation or system monitoring information. “NMEA 2000” is a registered trademark of the National Marine Electronics Association.

DisplayProducts

Maretron brings you multi-purpose graphical displays - whether it'sone at the helm or multiple throughout the vessel, the universaldisplays deliver the information you need, when and where youneed it.

Available in both sunlight readable color (DSM250) and high-resolution monochrome (DSM200), the displays provide a widearray of information including AC power, battery, depth, engine,environment, fuel management, GPS, heading, navigation, rudder,speed, tanks, time, transmission, weather, wind and more.

Maretron’s displays are completely user configurable and you canscroll from screen to screen automatically or with a single push of abutton. Pictured to the right are just a few of the many possiblescreen configurations.

Barometric Pressure Graph Course Up Heading Single Numeric Depth

Quad Numeric Rolling Road Swing Meter

Tri-Display Local Weather Wind Speed and Direction

Rudder Angle Single Tachometer Single Tank Gauge Trim Tabs

Dual SOG and COG GPS Status Moon Phase Quad Engine Gauges

www.maretron.com

DSM250 Multi-Function Color Display

The DSM250 displays a multitude ofinformation including AC power,battery, depth, engine, environment,fuel management, GPS, heading,navigation, rudder, speed, tanks,time, transmission, weather, windand more.

Maretron’s DSM250 is engineeredand manufactured to the higheststandards (IEC 60945 MaritimeNavigation and RadiocommunicationEquipment). Its compact waterproofhousing will provide years of reliableperformance. The DSM250 isavailable in three different colorcases: black, gray, or white.

Maretron’s DSM250 is a high-resolution sunlightviewable color display that allows easy interpretationof NMEA 2000® instrument and navigation datathrough custom display configurations, featuring aneasy-to-use five-key illuminated keypad.

Unlike traditional single-display units, DSM250 userscan choose numeric, gauge, or graph formats insingle or multiple displays, with cycling optionspossible for a wide range of favorite data. Thesemultiple display options conserve mounting spaceand reduce overall system cost.

The DSM250 will directly connect with any NMEA2000® network and display any or all informationcaptured throughout the vessel. Various audio andvisual alarms are also programmable.


NMEA 2000

®

Standard Level A (Highest Level of Certification)

NMEA 2000

®


Display Technology Active Matrix TFT LCD Sunlight Readable

Display Resolution 320 x 240 Pixels QVGA Resolution

Display Viewable Area 117mm W x 88 mm H 5.7” Diagonal

Display Backlighting CCFL 3-User-Programmed Levels 0-100%

Keyboard 5 Silicone Rubber Keys Multi-Colored LED Backlighting

Languages Supported English, Dutch (Nederlands) User Selectable

Standard Comment

NMEA 2000

®

Level A

Maritime Navigation and Radiocommunication Equipment & Systems Tested to IEC 60945




Power Consumption (Maximum) < 650mA Low Supply, Full Brightness

< 200mA Nominal Supply, Low Brightness


®





Size 6.875” x 5.75” x 1.75” Including Flanges for Mounting

Weight 26 Oz.

Mounting Surface or Flush Mount

Parameter Value




Storage Temperature -40° to 70°C






Electromagnetic Emission Conducted and Radiated Emission per IEC60945-9



Envi

rom

enta

lM

echa

nica

lEl

ectr

ical

Supp

orte

d Da

ta D

ispl

ay T

ypes

Cert

ifica

tions

Spec

ifica

tions


AC Power Gen. AC Current, Gen. AC Freq., Gen AC Voltage

Battery Current, Temperature and Volts


Engine Monitor Tach., Eng. Hrs., Oil, Coolant, Boost & Fuel Pres., Voltage, Oil & Coolant Temp., Fuel Rate

Environment

Barometer, Heat Index, Hum. Inside & Outside, Moon Phase, Sunrise, Sunset, Temp. Dew Point, Temp

Eng.Room, Temp. Inside, Temp. Sea, Twilight AM & PM, Wind Chill

Fuel Management Total Fuel Rate,Total Fuel Economy, Total Fuel Remaining


Heading Heading, Rate of Turn, Variation, Pitch, Roll

Navigation BOD, Drift, Set, XTE, TTG, ETA, VMG, DTW, BTW, Rolling Road

Rudder Indicator Rudder Position and Order

Speed Through Water, Over Ground, Total Log, Trip Log

Tank Monitor Capacity, Level, Remaining

Time Date Local, Date UTC, Time Local, Time UTC

Transmission Gear, Oil Pressure, Oil Temperature

Trim Tabs Bar Graph

Wind Apparent Direction and Speed, True Direction and Speed, Ground Speed and Direction



www.maretron.com

DSM200 The DSM200 displays amultitude of informationincluding AC generation,battery, compass, depth,engine data, fuel management,GPS, navigation, rudderindication, speed, tank monitor,weather, wind, and more.

Maretron’s DSM200 isengineered and manufactured tothe highest standards (IEC60945 Maritime Navigation andRadiocommunicationEquipment). Its compactwaterproof housing will provideyears of reliable performance.

Maretron’s DSM200 is a high-resolution monochromedisplay that allows easy interpretation of NMEA 2000®

instrument and navigation data through custom display configurations, featuring an easy-to-use five-keyilluminated keypad.

Unlike traditional single-display units, DSM200 users canchoose numeric, gauge, or graph formats in single ormultiple displays, with cycling options possible for a widerange of favorite data. These multiple display optionsconserve mounting space and reduce overall system cost.

The DSM200 will directly connect with any NMEA 2000®

network and display any or all information capturedthroughout the vessel. Various audio and visual alarms arealso programmable.


NMEA 2000

®

Standard Level A (Highest Level of Certification)

NMEA 2000

®


Display Technology FSTN Transreflective LCD Sunlight Readable

Display Resolution 320 x 240 Pixels QVGA Resolution

Display Viewable Area 122mm W x 92mm H 5.7” Diagonal

Display Backlighting Red LED 3-User-Programmed Levels 0-100%

Keyboard 5 Silicone Rubber Keys Red LED Backlighting

Standard Comment

NMEA 2000

®

Level A




AC Power Gen. AC Current, Gen. AC Freq., Gen AC Voltage

Battery Current, Temperature and Volts


Engine Monitor Tach., Eng. Hrs., Oil, Coolant, Boost & Fuel Pres., Voltage, Oil & Coolant Temp., Fuel Rate

Environment

Barometer, Heat Index, Hum. Inside & Outside, Moon Phase, Sunrise, Sunset, Temp. Dew Point, Temp

Eng.Room, Temp. Inside, Temp. Sea, Twilight AM & PM, Wind Chill

Fuel Management Total Fuel Rate,Total Fuel Economy, Total Fuel Remaining


Heading Heading, Rate of Turn, Variation, Pitch, Roll

Navigation BOD, Drift, Set, XTE, TTG, ETA, VMG, DTW, BTW, Rolling Road

Rudder Indicator Rudder Position and Order

Speed Through Water, Over Ground, Total Log, Trip Log

Tank Monitor Capacity, Level, Remaining

Time Date Local, Date UTC, Time Local, Time UTC

Transmission Gear, Oil Pressure, Oil Temperature

Trim Tabs Bar Graph

Wind Apparent Direction and Speed, True Direction and Speed, Ground Speed and Direction


Operating Voltage 9 to 16 Volts

Power Consumption < 200mA Average Current Drain (backlight off)

<350mA Average Current Drain (backlight on)


®





Size 6.8” x 5.75” x 1.25”

Weight 24 Oz.

Mounting Surface, Flush, or Gimbal Mount Gimbal Mount Optional

Parameter Value












Envi

rom

enta

lM

echa

nica

lEl

ectr

ical

Supp

orte

d Da

ta D

ispl

ay T

ypes

Cert

ifica

tions

Spec

ifica

tionsMulti-Function

Graphic Display



NavigationInstruments

Maretron brings you state-of-the-art, award-winning navigation instruments.

Take our compass for example. We were the first to bring solid-state compass technology to themarine industry, resulting in superior accuracyand incredible response time. The result – rocksolid radar overlay on your charting software andunprecedented autopilot performance.

Our ultrasonic wind/weather station is anotherexample of award-winning technology – nomoving parts and built from the ground up for themarine industry. Aerodynamically designed foraccurate wind speed and direction even when theboat is heeled over in pitching and rolling seas.

And of course, all our navigation instruments areengineered to the highest international marinestandard (IEC 60954) for years of reliable service.

SAIL honors Freeman K. Pittman's memory with its annualFKP Awards, which recognize the finest and most

innovative new products on the market—the very stuff thatFreeman sought out during his tenure at the magazine.

The NMMA Innovation Awards are presented each year at theMiami Boat Show and they recognize products that exhibit

innovative distinction from other products, benefit to the marineindustry and/or consumer, practicality, and cost-effectiveness.

www.maretron.com

Maretron’s outdoor weather station measures wind speed anddirection, air temperature, barometric pressure, and relativehumidity. The wind measurement is performed using ultrasonicsensors, which means there are no moving parts to wear outor to get caught in the rigging.

The WSO100 accurately measures wind speed and directioneven when tilted, making it ideally suited for heeled sailboatsor powerboats operating in pitching and rolling seaways.

When used with a Maretron displays (DSM250/DSM200), youcan view apparent wind speed and direction, humidity, airtemperature, barometric pressure (with graphs to see trends),wind chill factor, heat index, and dew point. If you add speedthrough water (DST100), GPS (GPS100) and compass(SSC200), you can view true vessel referenced wind speed anddirection as well as ground referenced speed and direction.

The WSO100 provides these functions:

• Apparent Wind Speed• Apparent Wind Direction• Atmospheric Pressure• Air Temperature• Relative Humidity

N2KView Environment Screen

WSO100 Ultrasonic Wind and Weather Station

Envi

rom

enta

lM

echa

nica

lEl

ectr

ical

NMEA

200

0® Pa

ram

eter

Gr

oup

Num

bers

(PGN

s)Ce

rtifi

catio

ns


Wind Speed Range 0.5 to 99 mph

Wind Speed Resolution 0.1 mph

Wind Speed Accuracy +-5% or 1 mph Tilt 0° (operates to 30° tilt)

Wind Direction Accuracy +-5% Tilt 0° (operates to 30° tilt)

Temperature Range -25° to 55° C

Temperature Resolution 0.1° F

Temperature Accuracy ± 1° F

Relative Humidity Range 0 - 99% RH

Relative Humidity Resolution 1% RH

Relative Humidity Accuracy4% 0%-99% RH

Barometric Pressure Range 880 to 1080 mb (26 to 32” Hg)

Barometric Pressure Resolution 0.7 mb (0.02” Hg)

Barometric Pressure Accuracy ± 3.4 mb (± 0.1” Hg)

Standard Comment

NMEA 2000

®

Level A







®





Size 4.25” dia. x 3.45” Including Mounting Bracket

Weight 10 Oz. Including Mounting Bracket

Parameter Value










Electromagnetic Emission Conducted and Radiated Emission per IEC 60945-9



Description PGN # PGN Name

Periodic Data PGNs

130311 Environmental Parameters

130306 Wind Data

130310 Environmental Parameters

Response to Request PGNs

126464 PGN List (Transmit and Recieve)

126996 Product Information

126998 Configuration Information

Protocol PGNs

059392 ISO Acknowledge

059904 ISO Request

060416 ISO Transport Protocol, Connection Management

060160 ISO Transport Protocol, Data Transfer

060928 ISO Address Claim

065240 ISO Address Command

126208 NMEA Complex Request/Command/Acknowledge

Spec

ifica

tions



www.maretron.com

Maretron’s SSC200 is a solid state, rategyro electronic compass that providesbetter than 1° heading accuracy through±45° of roll and pitch angle, and betterthan 1° roll and pitch accuracy in staticconditions. Each SSC200 is factorycalibrated for maximum accuracy. Itdelivers precise, reliable headinginformation ten times per second, plusvessel attitude including pitch and rollreadings once per second. Amicromachined rate gyro is used byadvanced stabilization algorithms toprovide accurate, stable readings duringdynamically changing conditions such ashard turns or rough seas, making it anideal heading sensor for autopilotapplications.

Maretron’s SSC200 is certified to theNMEA 2000® network standard andcompatible with the NMEA 0183 digitalinterface standard. It connects directlywith any NMEA 2000® network and/orNMEA 0183 listeners to shareinformation with navigational software,chart plotters, autopilots, and dedicatedinstrument displays – includingMaretron’s DSM250 and DSM200graphical displays.

The SSC200 can be automaticallycalibrated for deviation. Its dynamicaccuracy is improved with advanceddigital filtering of the 3-axismagnetometer, 2-axis accelerometerand rate gyro.

The SSC200 is engineered andmanufactured to the highest standards(IEC 60945 Maritime Navigation andRadiocommunication Equipment). Itscompact waterproof housing willprovide years of reliable performance.

DSM250/DSM200 Screen Shots

SSC200Solid State Compass

Envi

rom

enta

lM

echa

nica

lEl

ectr

ical

NMEA

018

3Se

nten

ces

NMEA

200

0® Pa

ram

eter

Gr

oup

Num

bers

(PGN

s)Ce

rtifi

catio

nsSp

ecifi

catio

ns


Static Heading Accuracy <1° Factory Calibrated (±45° Pitch and Roll)

Heading Display Resolution 0.1° With Maretron Display

Settling Time 1 second To Static Accuracy After 35°/Second Turn

Heading Update Rate 10 per Second

Heading Deviation Yes Automatic

Alignment Calibration Yes In Boat Calibration With Maretron Displays

Pitch and Roll Range ±80° With Maretron Display

Pitch and Roll Accuracy < 1° Up to ±45° Pitch and Roll*

Pitch and Roll Display Resolution 0.1° With Maretron Display

Pitch and Roll Update Rate

1 per Second

Pitch and Roll to Boat Alignment Yes In Boat Calibration with Maretron Displays

Rate of Turn Range 0° - 90°/Second At 0° Pitch and Roll

Rate of Turn Accuracy 1° per second

Rate of Turn Update Rate 10 per Second

NMEA 0183 Standard Compatible Up to 38,400 Baud (40 Hz Update Rate)

Standard Comment

NMEA 2000

®

Level A




Periodic Data PGNs

127250

127257

127251

Vessel Heading

Attitude

Rate of Turn

Response to Request PGNs126464

126996

126998

PGN List (Transmit and Recieve)

Product Information

Configuration Information

Protocol PGNs

059392

059904

060416

060160

060928

065240

126208

ISO Acknowledge

ISO Request

ISO Transport Protocol, Connection Management

ISO Transport Protocol, Data Transfer

ISO Address Claim

ISO Address Command

NMEA Complex Request/Command/Acknowledge





®





Size 4.46” x3.23 x 2.14” Including Flanges for Mounting

Weight 7 Oz. Including Mounting Bracket

Mounting Deck or Bulkhead

Parameter Value












Sentence Description

HDG Heading, Deviation, and Variation

HDM Heading, Magnetic

HDT Heading, True

ROT Rate of Turn

RMC (receive) Recommended Minimum Specific GNSS Data (variation)

VTG (receive) Course over Ground and Ground Speed (variation)



www.maretron.com

Maretron's GPS100 provides reliableposition fixes 10 times per second,accurate boat speed four times per second,and precision time once per second.

The GPS100 antenna/receiver is a plug-and-play device that is fully compliant andcertified to the NMEA 2000® Standard.

It will directly connect to any NMEA 2000®

network and communicate withnavigational software, chart plotters,autopilots and dedicated instrument displays – such as Maretron’s DSM250 andDSM200 graphical displays – and itscompact, waterproof housing providesyears of reliable performance.

The GPS100 automatically decodes GPScorrection signals from Satellite BasedAugmentation Systems (SBAS) including theNorth American Wide Area Augmentation System(WAAS), the European Geostationary NavigationOverlay System (EGNOS), or the Asian Multifunctional Transport Satellite-basedAugmentation System (MSAS) to provide betterthan 3m accuracy.

The GPS100 is easily mounted to any 1”standard marine mount with its standard 1”–14male threads. It can also be mounted directly toa deck.

GPS100GPS Antenna/Receiver

Envi

rom

enta

lM

echa

nica

lEl

ectr

ical

NMEA

200

0® Pa

ram

eter

Gr

oup

Num

bers

(PGN

s)Ce

rtifi

catio

nsSp

ecifi

catio

ns


Position Accuracy (Autonomous) <10m 2D RMS (95% Data Falls Within 10m)

Position Accuracy (WAAS) <3m 2D RMS (95% Data Falls Within 3m)

Channels 12 Simultaneous Tracking of 12 Satellites

Position Update Rate 10 per second

Speed Update Rate 4 per Second

Time Update Rate 1 per Second

Hot Start 8 Seconds Start Within Hours of Last Power Down

Warm Start 38 Seconds Start Within Days of Last Power Down

Cold Start 45 Seconds Start From Unknown Position

Datum

WGS84

Satellite Baseed Augmentation System

WAAS North America

EGNOS Europe

MSAS Asia

Battery Backup Lithium (4-5) days Holds Position for Hot/Warm Starts

Standard Comment

NMEA 2000

®

Level A







®





Size 4” dia. x 1.65”Tall Not Including Pipe Mounting Bracket

Weight 6 Oz. Not Including Pipe Mounting Bracket

Mounting Deck or Pole

Pole Mount 1”-14-UNS-2B 1”-14 TPI Standard Marine Mount

Parameter Value














Periodic Data PGNs

126992 System Time

128259 Speed

129025 Position, Rapid Update

129026 COG and SOG, Rapid Update

129529 GNSS Position Data

129539 GNSS DOP

129540 GNSS Satellites in View


126464 PGN List (Transmit and Recieve)

126996 Product Information

126998 Configuration Information

129538 GNSS Control Status

129541 GPS Almanac Data

Protocol PGNs

059392 ISO Acknowledge

059904 ISO Request

060416 ISO Transport Protocol, Connection Management

060160 ISO Transport Protocol, Data Transfer

060928 ISO Address Claim

065240 ISO Address Command

126208 NMEA




Maretron’s DST100 Smart™ RetractableDepth/ Speed/Temperature Transducer,delivers precise digital depth, accuratespeed and exact water temperature evenat speeds above 40 knots—all with noprogramming or calibration necessary.

Its patented Smart™ Sensor technology,retractable and removable sensor, andNMEA 2000® network connectivity makethe DST100 easy to interpret, easy toinstall and connect with other navigationequipment, and easy to maintain.

The DST100 measures precise waterdepth at 0.4m to 60m with a wide beamwidth and is tolerant to most deadriseangles. It reads water temperature from-10°C to +40°C at ±1.0°C accuracy, andaccurate speed from 1 to 60 knots. At235kHz it can be used with a fishfinderas an ideal navigation tool for sport orcommercial fishing vessels—or withsailing vessels of all sizes.

The DST100’s plastic, bronze, orstainless steel housing choices arecompatible with any hull material.It includes a blank plug to replaceits sensor unit when the vessel willbe docked for extended periodsor trailered. This preventsdamage to the sensor andreduces fouling growth.

Maretron’s DST100 is CEcompliant (IERC945) and ismanufactured to the highestquality standards under ISO9K/2Kprocedures. Its compact,waterproof housing will provideyears of reliable performance,making it the Smart™ choice inmarine sensing.

DST100 Depth/Speed/Temperature Transducer

Envi

rom

enta

lM

echa

nica

lEl

ectr

ical

NMEA

200

0® Pa

ram

eter

Gr

oup

Num

bers

(PGN

s)Ce

rtifi

catio

nsSp

ecifi

catio

ns


Depth Operating Frequency 235kHz Wide Beam Angle

Minimum Depth 0.4 meters Deadrise Angle Tolerant

Maximum Depth 60 meters No Calibration Required

Depth Tracking Speeds Up to 40 knots High Speed Bottom Tracking Capability

Depth Update Rate 1 second

Speed Sensor Paddlewheel No Calibration Required

Speed Range 1-60 knots Microprocessor Signal Processing Accuracy

Speed Update Rate 1 second

Water Temperature Range -10° to 40°C Fast Response Time

Water Temperature Accuracy ±1.0°C No Calibration Required

Deadrise Angle ≤22°

Standard Comment

NMEA 2000

®

Level B+



Description PGN# PGN Name

Periodic Data PGNs

128267

128259

130310

128275

Water Depth

Speed (Water Referenced)

Environmental Parameters (Water Temperature)

Distance Log


126464

126996

126998


Product Information


Protocol PGNs

059392

059904

060928

065240

126208

ISO Acknowledge

ISO Request

ISO Address Claim

ISO Address Command

NMEA - Command / Request / Acknowledge





®




Size 2.94” Dia x 4.87” Tall

Weight 12 Oz.

Housing Lexan/Bronze/Stainless Steel Bronze/Stainless Steel Optional

Parameter Value

IEC 60945 Classification Submerged




www.maretron.com




Engine / VesselMonitoring

Maretron brings you plug-and-play engine andvessel monitoring electronics for distributingcritical data throughout the vessel. Whetheryou're down in the engine room or up at the flybridge, all the information you need is availableeverywhere you need it.

Gone are the days of disparate systems that failto communicate with each other. With Maretron'snetworked electronic components like engine and tank monitors, vessel data is combined foradvanced features like fuel economy (MPG orGPM) or distance and time to empty (calculatedfrom engine fuel rate, vessel speed from GPS,and fuel remaining from tank monitor).

Finally, true vessel monitoring on a single networkcombining information for display anywhere andeverywhere you need it.

J2K100J1939 to NMEA 2000® Gateway

EMS100Analog Engine Monitoring System

TLA100Tank Level Adapter

RAA100Rudder Angle Adapter

www.maretron.com

Maretron's J2K100 attaches directlyinto J1939 networks of compatibleengines, transmissions, and gensetsand converts the J1939 data to thenew marine digital interface (NMEA2000®). Critical engine, transmission,and genset data is then distributedthroughout the vessel over a singlecable where it can be monitored byany NMEA 2000® compatible display.

The J2K100 can also be used as part ofa complete fuel computer. Simplyconnect the J2K100 together with theMaretron universal display (DSM200)and GPS antenna/receiver (GPS100)and you have a system capable ofdisplaying gallons per hour and/or milesper gallon.

The J2K100 converts the following information:

• AC Generator Current• AC Generator Frequency• AC Generator Voltage• Tachometer• Engine Hours• Coolant Pressure• Coolant Water Temperature• Engine Oil Pressure• Engine Oil Temperature• Boost Pressure• Fuel Rate Monitoring• Charging Voltage• Percent Engine Load• Percent Engine Torque• Rated Engine Speed• VIN• Software ID• Transmission Gear• Transmission Oil Pressure• Transmission Oil Temperature

J2K100 J1939 to NMEA 2000®

Gateway

Envi

rom

enta

lM

echa

nica

lEl

ectr

ical

NMEA

200

0® Pa

ram

eter

Gr

oup

Num

bers

(PGN

s)Ce

rtifi

catio

nsSp

ecifi

catio

ns

J1939 SPG/PGN Description NMEA 2000

®

PGN

190 / 61444 Engine Speed 127488

102 / 65270 Engine Turbocharger Boost Pressure 127488

100 / 65263 Engine Oil Pressure 127489

175 / 65262 Engine Oil Temperature 1 127489

110 / 65262 Engine Coolant Temperature 127489

167 / 65271 Alterator Potential (Voltage) 127489

183 / 65266 Engine Fuel Rate 127489

247 / 65253 Engine Total Hours of Operation 127489

109 / 65263 Engine Coolant Pressure 127489

94 / 65263 Engine Fuel Delivery Pressure 127489

92 / 61443 Engine Percent Load at Current Speed 127489

513 / 61444 Actual Engine - Percent Torque 127489

189 / 65214 Engine Rated Speed 127498

237 / 65260 Vehicle Identification Number 127498

234 / 65242 Software Identification 127498

523 / 61445 Transmission Current Gear 127493

127 / 65272 Transmission Oil Pressure 127493

177 / 65272 Transmission Oil Temperature 127493

Standard Comment

NMEA 2000

®

Level B+


EMC (Europe and FCC) and CE mark Electromagnetic Compatability


Periodic Data PGNs

127488

127489

127498

127493

065030

127504

Engine Parameters, Rapid Update

Engine Parameters, Dynamic

Engine Parameters, Static

Transmission Parameters, Dynamic

J1939 Generator Average Basic AC Quantities

AC Output Status


126464

126996

126998


Product Information


Protocol PGNs

059392

059904

060928

065240

126208

ISO Acknowledge

ISO Request

ISO Address Claim

ISO Address Command


Maretron Propietary PGNs 126720 Configuration





®





Size 4.5” x 3.2” x 2.09” Including Flanges For Mounting

Weight 24 Oz.

Parameter Value













The J2K100 is compatible withany engine, transmission, orgenset equipped with a J1939interface, including productsfrom the following manufacturers:

• Caterpillar• Cummins• Detriot Diesel• John Deere• Kohler• Northern Lights• Onan• Perkins• Steyr• Volvo Penta• Yanmar




www.maretron.com

Maretron’s EMS100 plugs directly intoengine wiring harnesses and convertsanalog signals such as watertemperature and oil pressure to the newmarine digital interface (NMEA 2000®).Critical engine data is then distributedthroughout the vessel over a singlecable where it can be monitored by anyNMEA 2000® compatible display.

The EMS100 is compatible withexisting instrument panels and keyswitches so you don't need to removethem while upgrading to newer digitaltechnology. For new installations, theEMS100 and a compatible NMEA2000® display can replace thetraditional analog instrument panel.

EMS100 Analog Engine Monitoring System

Envi

rom

enta

lM

echa

nica

lEl

ectr

ical

NMEA

200

0® Pa

ram

eter

Gr

oup

Num

bers

(PGN

s)Ce

rtifi

catio

nsSp

ecifi

catio

ns


Tachometer Analog/Digital Input Configurable by # of Teeth

Engine Hours Logged with Key On Stored Indefinitely in Non-Volatile Memory

Oil Pressure Analog Input Sensor Voltage Monitor/Sensitize

Coolant Water Temp Analog Input Sensor Voltage Monitor/Sensitize

Boost Pressure Analog Input Sensor Voltage Monitor/Sensitize

Drive Trim Angle Analog Input Sensor Voltage Monitor/Sensitize

Charging Voltage Alarm/Switch Input

Lube Oil Filter Alarm Alarm/Switch Input

Boost Pressure Alarm Alarm/Switch Input

Coolant Water Temperature Alarm Alarm/Switch Input

Coolant Water Level Alarm Alarm/Switch Input

Oil Pressure Alarm Alarm/Switch Input

Exhaust (Salt Water Flow) Alarm Alarm/Switch Input

Clutch Oil Pressure Alarm Alarm/Switch Input

Diesel Preheat Alarm Alarm/Switch Input

Standard Comment

NMEA 2000

®

Level A




Periodic Data PGNs

127488

127489

Engine Parameters, Rapid Update

Engine Parameters, Dynamic


126464

126996

126998


Product Information


Protocol PGNs

059392

059904

060416

060160

060928

065240

126208

ISO Acknowledge

ISO Request

ISO Transport Protocol, Connection Management

ISO Transport Protocol, Data Transfer

ISO Address Claim

ISO Address Command


Maretron Propietary PGNs 126720 Configuration



Power Consumption < 150mA From Battery


®





Size 5” x 4.5” x 1.25” Excluding Wiring Harness

Weight 12 Oz. Excluding Wiring Harness

Parameter Value













The EMS100 provides these functions:

• Tachometer• Engine Hours• Coolant Water Temperature• Engine Oil Pressure• Boost Pressure• Exhaust Gas Temperature• Fuel Rate Monitoring• Charging Voltage• Drive Trim• Fuel Filter Alarm• Boost Alarm• Coolant Water Level Alarm • Engine Oil Pressure Alarm • Exhaust (Salt Water Flow) Alarm• Coolant Water Temperature Alarm

The EMS100 is compatible with these Yanmar engines

(other engines supported soon, check our web page www.maretron.com):

• GM Series• YM Series• JH Series• LH Series• LP Series• LY Series




www.maretron.com

The TLA100 is used to adaptcommercially available resistive tanksenders to the NMEA 2000®

network. This allows you to observetank levels anywhere on the vesselwhere there are NMEA 2000®

compatible displays such as theMaretron DSM250 or DSM200.

The TLA100 is compatible with boththe American standard (240-30 ohm)and the European standard (10-180ohm) resistive senders. In fact, theTLA100 can be calibrated for anyresistance between 0 and 300 ohms.

Unlike most tank senders that onlywork with rectangular tanks, theTLA100 can be calibrated forirregular tank shapes so you knowthe true level of the tanks. You canalso use the TLA100 with analoggauges at the same time as NMEA2000® so you don't have to give upexisting analog gauges to enjoy theadvantages of digitally networkedinformation.

The Maretron TLA100 has the following features:

• NMEA 2000® Interface • Adapts American standard (240-30 ohm)

resistive senders to NMEA 2000® Network• Adapts European standard (10-180 ohm)

resistive senders to NMEA 2000® Network• Calibrated for any Resistance Range from

0 to 300 Ohms or 300 to 0 Ohms• Accommodates Irregularly Shaped Tanks

with 16 Point Calibration• 16 Programmable Tank Types Including

Fuel, Fresh Water, Waste Water, Live Well• Programmable Tank Number(s) Up to 16

per Tank Type• Programmable Tank Capacity• Works Alongside of Analog Gauges• Can be Used Standalone without

Analog Gauges

TLA100 Tank Level Adapter

Envi

rom

enta

lM

echa

nica

lEl

ectr

ical

NMEA

200

0® Pa

ram

eter

Gr

oup

Num

bers

(PGN

s)Ce

rtifi

catio

nsSp

ecifi

catio

ns


Accuracy +/-2% Does Not Include Inaccuracies of Analog Gauge or Sender

Resolution +/-1% Worst Case (Resolution Better at High Resistance Values)

Number of Tank Types 16 Fuel, Fresh Water, Waste Water, Live Well, Oil, etc.

Number of Tanks per Tank Type 16 16 Tanks per Tank Type Numbered 0-15

American Standard Senders 240-30 ohms Standard Sender Types are User Selectable

European Standard Senders 10-180 ohms Standard Sender Types are User Selectable

Calibration Resistance Range 0-300 ohms Non-Standard Sender Calibration

Support for Irregularly Shaped Tanks Yes Can be Calibrated for any Shape Tank

Programmable Tank Capacity Yes Allows Displays to Calculate Amount Remaining

Analog Gauge Support Yes Can be Used With or Without Analog Gauges

Parameter Comment

NMEA 2000

®

Level B+


FCC and CE Mark Electromagnetic Compatibility

Description PGN # PGN Name Default Rate

Periodic Data PGNs 127505 Fluid Level 0.4 Times/Second

Response to Requested PGNs 126464 PGN List (Transmit and Receive) N/A

126996 Product Information N/A

126998 Configuration Information N/A

Protocol PGNs 059392 ISO Acknowledge N/A

059904 ISO Request N/A

060928 ISO Address Claim N/A

065240 ISO Address Command N/A

126208 NMEA N/A



Power Consumption <100mA Average Current Drain


®

Spec. (1LEN = 50mA)


Load Dump Protection Yes Energy Rated per SAE J1113


Size 3.9"" x 1.2" x 1.0" Excluding NMEA 2000

®

Connector & Cable

Weight 9 oz.

Mounting Any Orientation

Parameter Value





Relative Humidity 93%RH @40° per IEC60945-8.2

Vibration 2-13.2Hz @ ±1mm, 13.2-100Hz @ 7m/s

2

per IEC 60945-8.7



Corrosion (Salt Mist) 4 times 7days @ 40°C, 95%RH after 2 hour Salt Spray Per IEC 60945-8.12

Electromagnet Emission Conducted and Radiated Emission per IEC 60945-9






www.maretron.com

Side View

Top View

3.9”

End View

1.2”

1”

Maretron’s RAA100 is used to adaptcommercially available resistive ruddersenders to the NMEA 2000® network.This allows you to observe rudder angleanywhere on the vessel where there areNMEA 2000® compatible displays suchas the Maretron DSM250 or DSM200.

The RAA100 is compatible with both theAmerican standard (240-30 ohms) andEuropean standard (10-180 ohm)resistive senders. In fact, the RAA100can be calibrated for any resistancebetween 0 and 300 ohms.

You can also use the RAA100 with analoggauges at the same time as NMEA 2000®

so you don't have to give up existinganalog gauges to enjoy the advantages ofdigitally networked information.

The Maretron RAA100 has the following features:

• NMEA 2000® Interface• Adapts American standard (240-30 ohm)

resistive senders to NMEA 2000® Network • Adapts European standard (10-180 ohm)

resistive senders to NMEA 2000® Network• Can be Calibrated for any Resistive Sender

Ranging from 0-300 Ohms or 300-0 Ohms• Three Point Electronic Calibration

eliminates need for Mechanical Adjustment or Calibration

• Can be Used Standalone Without Analog Gauges

Envi

rom

enta

lM

echa

nica

lEl

ectr

ical

NMEA

200

0® Pa

ram

eter

Gr

oup

Num

bers

(PGN

s)Ce

rtifi

catio

nsSp

ecifi

catio

ns


Accuracy +/-2% Does Not Include Inaccuracies of Analog Gauge or Sender

Resolution +/-1% Worst Case (Resolution Better at High Resistance Values)

American Standard Senders 240-30 ohms Standard Sender Types are User Selectable

European Standard Senders 10-180 ohms Standard Sender Types are User Selectable

Calibration Resistance Range 0-300 ohms Non-Standard Sender Calibration

Electronic Calibration Yes Eliminates need to mechanically adjust or calibrate

Analog Gauge Support Yes Can be Used With or Without Analog Gauges

Parameter Comment

NMEA 2000

®

Level B+


FCC and CE Mark Electromagnetic Compatibility

Description PGN # PGN Name Default Rate

Periodic Data PGNs 127245 Rudder 10 Times/Second

Response to Requested PGNs 126464 PGN List (Transmit and Receive) N/A

126996 Product Information N/A

126998 Configuration Information N/A

Protocol PGNs 059392 ISO Acknowledge N/A

059904 ISO Request N/A

060928 ISO Address Claim N/A

065240 ISO Address Command N/A

126208 NMEA N/A



Power Consumption <100mA Average Current Drain


®

Spec. (1LEN = 50mA)


Load Dump Protection Yes Energy Rated per SAE J1113


Size 3.9"" x 1.2" x 1.0" Excluding NMEA 2000

®

Connector & Cable

Weight 9 oz.

Mounting Any Orientation

Parameter Value





Relative Humidity 93%RH @40° per IEC60945-8.2

Vibration 2-13.2Hz @ ±1mm, 13.2-100Hz @ 7m/s

2

per IEC 60945-8.7



Corrosion (Salt Mist) 4 times 7days @ 40°C, 95%RH after 2 hour Salt Spray Per IEC 60945-8.12

Electromagnet Emission Conducted and Radiated Emission per IEC 60945-9



RAA100 Rudder Angle Adapter




Micro Drop-line to NME A 2000 ®

Component

4 amps

4 amps

T o Powe r Source

Micro Powertap Tee

Field-AttachableConnectors

Micro Tee Micro Tee

Micro Bulk Cable

Micro Double-ended

Cordsets Micro Double-ended

Cordsets

Micro Bulkhead Feed-Thru

Micro Multi-Port Box

Micro T ermination

Resistor

Micro T ermination

Resistor

Micro Drop-line to NME A 2000 ®

Component N2KMeter

NME A 2000 ®

Diagnostic T oo l

Micro NME A 2000 ® Network Example (Up to 4 amps per leg)

Mini Drop-line to NME A 2000 ®

Component

T o Powe r Source

Field-AttachableConnectors

Mini Bulk Cable

Mini Powertap Tee

Mini Double-ended Cordsets

Mini Double-ended Cordsets

Mini/Micro TeeMini Tee

Mini NME A 2000 ® Network Example (Up to 8 amps per leg)

Micro Multi-Port Box

MiniT ermination

Resistor

MiniT ermination

Resistor

Micro Drop-line to NMEA 2000 ®

Component

N2KMeter NME A 2000 ®

Diagnostic T oo l

8 amps 8 amps

Mini Bulkhead

Feed Thru

Maretron NMEA 2000 ®

Cables & Connectors

About NMEA 2000 ® Cables and ConnectorsThe NMEA 2000® standard goes beyond definingmessage content and includes requirements forthe cabling used to interconnect electroniccomponents (referred to as the physical interface).The following catalog pages contain the NMEA2000® approved network interconnectcomponents used to build an operational network.

About Micro and Mini Cable SystemsThere are two types of NMEA 2000® cablingsystems, one system called Micro and the othercalled Mini. The Micro cable system is generallyused for smaller networks requiring less power(i.e., less than 4 amps per network leg) while theMini cable system is used for larger networks (i.e.,more than 4 amps but less than 8 amps per leg).

Maretron NMEA 2000® Cable Features• Simple trunk and drop line topology interconnects all NMEA 2000® equipment• Drop line topology allows powered component removal or re-connection while

rest of network remains operational• Cable includes power and ground for powering equipment drawing less than

1 amp/device• Connectors include keys and keyways for simple error free connections• Screw thread connectors reduce chances of accidental disconnects of

essential equipment• Waterproof connection system prevents corroded intermittent connections and

continues to operate even while submerged in the bilge• Three independent cable shields (power pair, signal pair, and overall cable) protects

system from external noise sources such as high power radio transmitters and radar units• Nickel plated brass connector ends ideally suited to harsh marine environment• Phosphor bronze contact base material with gold over nickel plate for reliable connections• Overmolded cable connector ends provide strain relief • Simple easy to use diagnostic components enable trained and untrained personnel to

diagnose and troubleshoot network installations

Micro Bulk CableMicro bulk cable is primarily usedas drop cable, but it can also beused as the trunk line depending onnetwork power requirements. Bulkcable with field-attachableconnectors allows for maximumflexibility as cables can be made on the job to exact lengths.

MICRO BULK CABLE MICRO FIELD-ATTACHABLECONNECTOR

MICRO DOUBLE-ENDED CORDSETS

• Meets and exceeds NMEA 2000®

specifications for the highestreliability

• Trunk or drop cable for use withMicro connectors

• Used with field-attachable connectors to build exact length cables at the job site

Micro Field-AttachableConnectorField-attachable connectors allowyou to make field connections tobulk cable (see diagram). Thecolor-coded screw terminalsmatch the individual wire colorsfound within the bulk cable forerror-free field installation.

• Color-coded screw terminals make for error-free field installation

• Rugged housing materialdesigned to withstand harshmarine environments

Micro Double-Ended CordsetsDouble-ended cordsets are usedfor trunk or drop lines and make fora secure connection and simpletimesaving installation. Theconnectors are keyed for error-free connection and are waterproof forcontinued operation even whilesubmerged in the bilge.

• Rugged, IP-68 rated connectorsfor continued connectionintegrity in marine environments

• Various cable lengths to matchinstallation requirements

RATINGS:MATERIALS:

CONSTRUCTION:

POWER PAIRSWIRE:

SHIELDING:

DC RESISTANCE:MAX AMPERAGE:

COLOR CODE:DATA PAIR WIRE:

SHIELDING:

DC RESISTANCE:VELOCITY OF PROPAGATION

CAPACITANCE:COLOR CODE:

CABLE JACKET COLOR:

APPROVALSUL:

CSA:NMEA:

300V, 80ºCGRAY PVC OUTER JACKET W/ NYLON SKIN INNER INSULATION (POWER) PE FOAM INNER INSULATION (DATA)TWO SHIELDED PAIRS, #22 (19X34 AWG) COPPER DRAIN WIRE BETWEEN PAIRS

2#22 (19X34 AWG) INDIVIDUALLY TINNED STRANDED COPPERALUMINUM OUTSIDE/POLYESTER TAPE 25% OVERLAP17.5 OHMS/1000FT MAX @ 20ºC4ARED/BLACK2#24 (19X36 AWG) INDIVIDUALLY TINNED STRANDED COPPERALUMINUM OUTSIDE/POLYESTER TAPE25% OVERLAP27.7 OHMS/1000FT75% OF MAX @ 20ºC1200pF/ftWHITE/BLUEGRAY

AWM: CMG OR CL2, FLAME 1581AWM: I/II A/B, FT4 RATEDNMEA 2000® approved

Micro Bulk Cable

Specifications:

Cross Sectional View

Products:

AL/MYSHIELD

WHITE

RED

BLACK

BLUE

AL/MYSHIELD

BRAID SHIELDJACKET

ø.270"

[6.86mm]

DRAIN WIRE

PART NUMBER

M84-0024FTM84-0040

DESCRIPTION

Micro Bulk Cable (by the Foot)Micro Bulk Cable (300ft Spool)

MECHANICALCONNECTOR FACE:

MOLDED BODY:CONTACT:

COUPLING NUT:GROMMET:

CABLE RANGE OD:LENGTH:

DIAMETER:

COLOR CODING:

ELECTRICALVOLTAGE RATING:

AMPERAGE:

ENVIRONMENTALPROTECTION:

AMBIENT OPERATING TEMP:

CERTIFICATIONSCSA:

NMEA:

POLYAMIDEPOLYAMIDE GOLD PLATED BRASSNICKEL PLATED BRASSNITRITE RUBBER0.16-32” OD (4.1-8.1 mm)2.36”0.79”

PER NMEA 2000® STANDARDS

36V DC4A

IP68-13º TO 194º F (-25º TO 90º C)

CSA CERTIFIED, FILE NO LR6835NMEA 2000® approved

Micro Field-Attachable Connectors

Specifications:

Female

Male

Products:

3-NET-C

2-NET-S 1-SHIELD (SILVER) (RED)

(BLUE)

(BLACK)(WHITE)4-NET_H

5-NET_L

2-NET-S1-SHIELD

4-NET-H3-NET-C

5-NET-L (SILVER)(BLUE)

(WHITE)(BLACK)

(RED)

PART NUMBER

M8A5000-32DNM8A5006-32DN

DESCRIPTION

Micro Field-Attachable Connector (Female)Micro Field-Attachable Connector (Male)

Face Views

www.maretron.com

Micro Double-EndedCordsets

Specifications:

Face Views

Products:

3-NET-C


(BLUE)


5-NET_L

2-NET-S1-SHIELD

4-NET-H3-NET-C


(WHITE)(BLACK)

(RED)

PART NUMBER

MDND22A-M005MDND22A-M010MDND22A-M020MDND22A-M030MDND22A-M040MDND22A-M050MDND22A-M060MDND22A-M070MDND22A-M080MDND22A-M090MDND22A-M100

DESCRIPTION

Micro Double-Ended Cordset - 0.5 MeterMicro Double-Ended Cordset - 1 MeterMicro Double-Ended Cordset - 2 MeterMicro Double-Ended Cordset - 3 MeterMicro Double-Ended Cordset - 4 MeterMicro Double-Ended Cordset - 5 MeterMicro Double-Ended Cordset - 6 MeterMicro Double-Ended Cordset - 7 MeterMicro Double-Ended Cordset - 8 MeterMicro Double-Ended Cordset - 9 MeterMicro Double-Ended Cordset - 10 Meter

Female

Male

NYLON 6/6PVCNICKEL PLATED BRASSSEE MICRO BULK CABLE

FOR SPECIFICATIONS

0.57”

250V AC / DC4A

IP68, NEMA 6P-4º TO 221º F (-20º TO 105º C)

UL RECOGNIZED, FILE NO E152210CSA CERTIFIED, FILE NO LR6837NMEA 2000® APPROVED


MOLDED BODY:COUPLING NUT:

CABLE:

CONNECTOR OUTSIDEDIAMETER:


AMPERAGE:



CERTIFICATIONSUL:

CSA:NMEA:

Copyright 2007 Maretron, LLP. All rights reserved. As Maretron is constantly improving its products, all specifications are subject to change without notice. Maretron's products are designed to be accurateand reliable; however, they should be used only as aids to navigation and vessel monitoring, and not as a replacement for traditional navigation and vessel monitoring techniques. A prudent captain or

navigator never relies on a single source for navigation or system monitoring information. “NMEA 2000” is a registered trademark of the National Marine Electronics Association.

MICRO TEE MICRO POWERTAP TEE

Micro TeeA Tee is used to tap into the trunkline for adding a drop connection.The standard tee is also availablewith a cap for a protecteddiagnostic connection. Tees can be mated with all other devices onthe network of the same connector style.

• Gold contacts for greatestreliability

• Keyed connectors for error-freeconnections

Micro Powertap TeeA Powertap Tee is connected to anetwork backbone just like any Teebut rather than connecting a devicetheir purpose is to provide “bus”power. Maretron Powertap Teeuniquely provides two power inputspermitting doubled power provisionfor devices.

• Yellow cable indicates power and can’t be confused with graynetwork cable

• Two cable lengths to matchinstallation requirements




AMPERAGE:CONTACT MATERIAL:

CONTACT PLATING:



APPROVALSNMEA:

PVCPVCNICKEL PLATED BRASS

50V4APHOSPHOR BRONZE ALLOYGOLD OVER NICKEL ALLOY

IP68, NEMA 6P32º TO 140º F (0º TO 60º C)

NMEA 2000® APPROVED

Micro Tee

Specifications:

Products:

M12 MALE CONNECTOR

1.78"

[45.21mm]

2.20" [55.88mm]

M12 FEMALE CONNECTOR

M12 FEMALE CONNECTOR

WITH INTERNAL THREAD WITH EXTERNAL THREAD

WITH INTERNAL THREAD

PART NUMBER

MMICT555

DESCRIPTION

Micro Tee

Profile View

www.maretron.com


MOLDED BODY:O-RING:

COUPLING NUT:CABLE:

OUTSIDE DIAMETER:


AMPERAGE:



CERTIFICATIONSUL:

CSA:

NMEA:

Powertap Tee

Specifications:

Products:

LENGTH

PART NUMBER

M82516-M010M82516-M050

DESCRIPTION

Micro Powertap Tee - 1 MeterMicro Powertap Tee - 5 Meter

Profile View

Schematic

FemaleMicro

NYLON 6/6PVC NITRILE RUBBERNICKEL PLATED BRASSYELLOW #22 PVC JACKET 80%METALLIC BRAID AND PVCCONDUCTOR INSULATION OVER 26 X #36 COPPER STRANDING, 300VUL STYLE 2661 CSA AWM I/II A/B.25” (6.4MM)

250V AC / DC4A TOTAL


UL LISTED, FILE NO E152210CSA CERTIFIED, FILE NO LR6837SINGLE KEYWAY ONLYNMEA 2000® APPROVED

Micro Double-Ended Cordset (90° Female Connector)The Micro Double-ended Cordset (90° female connector) is ideally suitedfor situation where a tight bend isrequired. Anywhere there is limitedspace, like behind a display, the 90°connector will reduce clearances from3 inches to 1.5 inches.

MICRO DOUBLE-ENDED CORDSET(90° Female Connector)

• Ideal for making tight corners inlimited clearance situations

• Rugged, IP-68 rated connectors(submersible) for continuedconnection integrity in marineenvironment

Micro Double-EndedCordset (90° Female Connector)

Specifications:

Face Views

Products:

3-NET-C


(BLUE)


5-NET_L

2-NET-S1-SHIELD

4-NET-H3-NET-C


(WHITE)(BLACK)

(RED)

PART NUMBER

MDND32NB-M002

DESCRIPTION

Micro Double-ended Cordset (90° female connector)

Female

Male

NYLON 6/6PVCNICKEL PLATED BRASSSEE MICRO BULK CABLE

FOR SPECIFICATIONS

0.57”8 INCHES

250V AC / DC4A





CABLE:

CONNECTOR OUTSIDEDIAMETER:

LENGTH:


AMPERAGE:



CERTIFICATIONSUL:

CSA:NMEA:



Micro Termination ResistorsTermination Resistors are requiredon a NMEA 2000® network and areplaced at each end of a networktrunk cable. Like the double-endedcordsets, the termination resistorsare waterproof and continue tofunction even while submerged inthe bilge.

MICRO TERMINATIONRESISTORS

MICRO INLINE TERMINATIONRESISTOR

• Screw terminal connector forpositive connections

• Termination resistors are used to terminate both ends of thetrunk line

Micro Inline Termination ResistorThe inline terminator is used wherethe NMEA 2000® network isterminated at a product, for examplethe top of the mast at a weatherinstrument or GPS antenna/receiver.The inline terminator plugs directlyinto the product with the other endconnected to the network cable.

• Micro termination resistors usuallyterminate the network by plugginginto a tee.The inline terminatordoesn’t require a tee and easily fitswithin an instrument’s mountingpipe where a tee wouldn’t

• Rugged, IP-68 rated connectors(submersible) for continuedconnection integrity in marineenvironment

www.maretron.com





CONTACT PLATING:



APPROVALSNMEA:

NYLONGRAY PVCNICKEL PLATED BRASS

50V4APHOSPHUR BRONZE ALLOYGOLD OVER COPPER ALLOY

IP6832º F TO 140º F ( 0º C TO 60º C)


Micro TerminationResistors

Specifications:

Products:

1.84" REF. [46.7mm]

.57"

[14.5mm]

M12x1 INTERNAL THREAD

.57"[14.5mm]

2.02" [51.3mm]

M12x1 EXTERNAL THREAD

3-NO CONNECTION

2-NO CONNECTION

5-RESISTOR

4-RESISTOR

1-NO CONNECTION

121

5-RESISTOR

3-NO CONNECTION

4-RESISTOR1-NO CONNECTION

2-NO CONNECTION

121

PART NUMBER

MDND100MDND150

DESCRIPTION

Micro Male Termination ResistorMicro Female Termination Resistor





CONTACT PLATING:



APPROVALSNMEA:

NYLONBLACK PVCNICKEL PLATED BRASS

50V4APHOSPHUR BRONZE ALLOYGOLD OVER COPPER ALLOY

IP6832º F TO 140º F ( 0º C TO 60º C)


Specifications:

Products:PART NUMBER

MDND200

DESCRIPTION

Micro Inline Termination Resistor

Female / Male

FemaleProfile

FemaleFace View

MaleProfile

MaleFace View 3-NO CONNECTION

2-NO CONNECTION

5-RESISTOR

4-RESISTOR

1-NO CONNECTION

121

5-RESISTOR

3-NO CONNECTION

4-RESISTOR1-NO CONNECTION

2-NO CONNECTION

121

Female Face View

Male Face View

Micro Inline Termination Resistor

Profile View

MICRO BULKHEAD FEED-THRU

Micro Bulkhead Feed-thruThe Bulkhead Feed-Thru allows easeof installation through panels orbulkheads and establishes futureconnection points in a networkinstallation. The bulkhead feed-thrualso maintains the integrity ofwatertight bulkheads by providing awaterproof seal and connection.

• Features rugged keyways forpositive alignment of connections

• Waterproof rated to IP67

MECHANICALSHELL:

INSERT:GASKET MATERIAL:

LOCK WASHER:


AMPERAGE:



APPROVALSNMEA:

NICKEL OVER BRASSNYLON 6/6NEOPRENEALLOY

250V AC / DC4A

IP-67-40º TO 176ºF (-20º TO 80ºC)



Specifications:

Products:

RECEPTACLESEALING GASKET

LOCK WASHER

LOCKNUT

SHELL

M12x1

1.15"[29.2mm]

1.87" [47.5mm]

0.50"

[12.7mm]

PART NUMBER

M8R5L30

DESCRIPTION


Profile View

Cutout



Micro Multiport BoxMultiport boxes allow several dropcables to be consolidated andconnected back to the trunk,which eliminates the need to havenumerous tees connected near asingle point. Multiport boxesconnect back to the trunk througha Tee.

MICRO MULTIPORT BOX MICRO 4-WAY TEE

• Ideal for consolidating manyconnections; for example behinddashboards


Micro 4-Way TeeThe 4-way tee simplifies installationand reduces the number of screw connections where multiple dropconnections are closely grouped together. Up to 4 drop lines can beconnected to a single 4-way tee for convenient, reliable, andeconomical installations.

• Easily connect four differentdrops from single component

• Replace 4 individual tees

• Nickel plated brass connectorsare waterproof and ideally suitedfor marine applications

www.maretron.com

MECHANICALINSERT:

HOUSING:HOUSING (RECEPTACLE):

ID LABEL:HOME RUN CONNECTOR:

HOME RUN CABLE:


AMPERAGE:



APPROVALSNMEA:

PAGLASS-FILLED PBT NICKEL PLATED BRASSABSMICRO MALEMICROSEE BULK CABLE FOR SPECIFICATIONS

30V AC / DC4A



Micro Multiport Box

Specifications:

Products:

2.87" [73.0mm]

[4.6mm]

[54.1mm]

[4.6mm]

.18"

TYP.3-PLCS

3.23" REF. [82.0mm]

.18" REF.

2.13" REF.

[27.0mm]

1.06" REF.

[31.8mm]

1.25" REF.

[26.9mm]

1.06" REF.

1.30"

.65"[16.5mm]

[33.0mm]

M12x1 FEMALE

NOTE: OVERALL HEIGHT 1.30" [33.0mm]

3

4 2

1

PIN 1 SHIELD

PIN 2 NET_S

PIN 3 NET_C

PIN 4 NET_H

PIN 5 NET_L

PIN 5 NET_L

PIN 4 NET_H

PIN 3 NET_C

PIN 2 NET_S

PIN 1 SHIELD

PIN 3 NET_C

PIN 4 NET_H

PIN 5 NET_L

PIN 1 SHIELD

PIN 2 NET_S

PIN 5 NET_L

PIN 4 NET_H

PIN 3 NET_C

PIN 2 NET_S

PIN 1 SHIELD

PIN 3 N

ET_C

PIN 4 N

ET_H

PIN 5 N

ET_L

PIN 1 SH

IELD

PIN 2 N

ET_S

PART NUMBER

MDND4500-005MDND4500-01MDND4500-02MDND4500-03MDND4500-04MDND4500-05

DESCRIPTION

Micro Multiport Box - 0.5 MeterMicro Multiport Box - 1 MeterMicro Multiport Box - 2 MeterMicro Multiport Box - 3 MeterMicro Multiport Box - 4 MeterMicro Multiport Box - 5 Meter

Profile View Product Views

Schematic





CONTACT PLATING:



APPROVALSNMEA:

PA66 NYLONPVCNICKEL PLATED BRASS

50V4ACOPPER ALLOYGOLD

IP6732º TO 140º F (0º TO 60º C)


Micro 4-Way Tee

Specifications:


M84587-0001

DESCRIPTION

Micro 4-way Tee Connector

Copyright 2007 Maretron, LLP. All rights reserved. As Maretron is constantly improving its products, all specifications are subject to change without notice. Maretron’s products are designed to be accurateand reliable; however, they should be used only as aids to navigation and vessel monitoring, and not as a replacement for traditional navigation and vessel monitoring techniques. A prudent captain or


FEMALEw/ Internal ThreadsProfile and Face View

MALEw/ External ThreadsProfile and Face View

MECHANICALCONNECTOR FACE:CONNECTOR BODY:

CONTACT:COUPLING NUT:

GROMMET:CABLE RANGE OD:

ACCEPTABLE WIRE GAUGES:

COLOR CODING:


AMPERAGE:



CERTIFICATIONSCSA:

NMEA:

POLYURETHANEPOLYAMIDE PAGGOLD-PLATED BRASSNICKEL PLATED BRASSNEOPRENE0.20"-0.48" (5.0-12.0 MM),

THICK, THIN, MID#24 AWG (0.25 MM2) TO #15 AWG (2.0 MM2)PER NMEA 2000® STANDARDS

600V AC / DC8A

IP68-40º TO 176º F (-20° TO 80° C)

CSA CERTIFIED, FILE NO LR6837NMEA 2000® APPROVED

Mini Field-Attachable Connectors

Specifications:

Products:

7/8"-16UNTHREAD

3.54" [90.0mm]

1.00" [25.4mm]1.11" [28.2mm]

4-WHITE

5-BLUE

3-BLACK

2-RED

1-DRAINSILVER

2

1

3

5

4

1.11" [28.2mm]

3.70" [94.0mm]

1.00" [25.4mm]

7/8"-16UN-2ATHREAD

1-DRAIN

2-RED 3-BLACK

4-WHITE

5-BLUE

PART NUMBER

M1A5000-34DNM1A5006-34DN

DESCRIPTION

Mini Field-Attachable Connector - FemaleMini Field-Attachable Connector - Male

Female/Male

Mini Bulk CableMini Bulk cable is primarily used asthe trunk line but it can also be usedas drop cable. Mini cable has a highercurrent carrying capability (8 amps)as opposed to Micro cable (4 amps)and is generally found on largersystems with many components thatdraw power directly from the bus.

MINI BULK CABLE MINI FIELD-ATTACHABLECONNECTORS

• Meets and exceeds NMEA 2000® specifications for thehighest reliability

• Trunk cable for use with Miniconnectors

• Used with Field-AttachableConnectors to build exact lengthcables at the job site

Mini Field-AttachableConnectorsField-attachable connectors allowyou to make field connections tobulk cable. The color-codedscrew terminals match theindividual wire colors found withinthe bulk cables for error-free fieldinstallation.

• Color-coded screw terminatorsmake for error-free fieldinstallation

• Rugged housing materialdesigned to withstand harsh marine environments

www.maretron.com

OVERALLRATINGS:

MATERIALS:

CONSTRUCTION:

POWER PAIRWIRE:

SHIELDING:

DC RESISTANCE:MAX AMPERAGE:

COLOR CODE:

DATA PAIRWIRE:

SHIELDING:

DC RESISTANCE:

CAPACITANCE:COLOR CODE:

APPROVALSUL:

CSA:NMEA:

300V, 80ºCGRAY PVC OUTER JACKET W/ NYLON SKIN INNER INSULATION (POWER) PE FOAM INNNER INSULATION (DATA)TWO SHIELDED PAIRS, #18 AWG (19X#30) DRAIN WIRE BETWEEN PAIRS

2#15 (19X#28 AWG) STRANDED TINNED COPPERALUMINUM OUTSIDE/POLYESTER TAPE 25% OVERLAP3.6 OHMS/1000FT MAX @ 20ºC8ARED/BLACK

2#18 (19X#28 AWG) STRANDED TINNED COPPERALUMINUM OUTSIDE/POLYESTER TAPE25% OVERLAP6.92 OHMS/1000 FT MAX @ 20ºC12PF/FTWHITE/BLUE

UL TYPE CL2, VL 1581 FLAMERESISTANCECSA AWM: I/II AND A/B FT4NMEA 2000® APPROVED

Mini Bulk Cable

Specifications:

Face Views

Products:

DRAIN WIRE

BRAID SHIELD

AL/MY SHIELD

BLUE

JACKET

WHITE

AL/MYSHIELD

RED

BLACK

ø.475" [12.07mm]

PART NUMBER

M84-0030FTM84-0050

DESCRIPTION

Mini Bulk Cable by the FootMini Bulk Cable (300 ft Spool)

MINI DOUBLE-ENDED CORDSET

Mini Double-Ended CordsetDouble-ended cordsets are usedfor trunk or drop lines and make fora secure connection and simple timesaving installation. Theconnectors are keyed for error-freeconnection and are waterproof for continued operation even whilesubmerged in the bilge.

• Rugged, IP-68 rated connectorsfor continued connectionintegrity in marine environment




CABLE:

OUTSIDE DIAMETER:


AMPERAGE:CONTACTS:

CONTACT PLATING:



CERTIFICATIONSUL:

CSA:NMEA:

PVC-UL STD 94-VPVC-UL STD 94-VNICKEL PLATED BRASSMINI SEE BULK CABLE FOR SPECIFICATIONS0.475" (12.1 MM)

300V AC / DC8A BASED ON CABLE TYPEPHOSPHOR-BRONZE BASE MATERIALGOLD OVER NICKEL



Mini Double-EndedCordset

Specifications:

Products:

ø1.00" REF

ø1.00" REF

2.21" REF. 2.34" REF.

LENGTH

[25.40 mm]

[14.22 mm]

ø.56" REF

7/8"-16 UN-2B 7/8"-16 UN-2B

[56.13mm] [59.44mm]

[25.40mm]

PART NUMBER

MDN11A-M005MDN11A-M010MDN11A-M020MDN11A-M030MDN11A-M040MDN11A-M050MDN11A-M060MDN11A-M070MDN11A-M080MDN11A-M090MDN11A-M100

DESCRIPTION

Mini Double-Ended Cordset - 0.5 MeterMini Double-Ended Cordset - 1 MeterMini Double-Ended Cordset - 2 MeterMini Double-Ended Cordset - 3 MeterMini Double-Ended Cordset - 4 MeterMini Double-Ended Cordset - 5 MeterMini Double-Ended Cordset - 6 MeterMini Double-Ended Cordset - 7 MeterMini Double-Ended Cordset - 8 MeterMini Double-Ended Cordset - 9 MeterMini Double-Ended Cordset - 10 Meter

Profile View

MaleFemale

5. NET_L4. NET_H

3. NET_C

2. NET_S 1. SHIELD

1. SHIELD2. NET_S

3. NET_C

4. NET_H5. NET_L



MINI POWERTAP AND POWER CABLES

Mini Powertap and Power CablesA powertap is connected to a networkbackbone just like any Tee but ratherthan connecting a device their purposeis to provide “bus” power. Typically aPowertap is placed as central aspossible between total devices onbackbone. Maretron Powertap uniquelyprovides two power inputs permittingdoubled power provision for devices.

POWERTAPMECHANICAL

INSERT:HOUSING:

RECEPTACLE HOUSING:MOUNTING:


FUSE PROTECTION:GROUNDING:



APPROVALSNMEA:

POWER CABLEMECHANICAL

CONNECTOR FACE:MOLDED BODY:COUPLING NUT:

CABLE:

CABLE DIAMETER:


AMPERAGE:



NYLON 6/6PBTZINC DIECAST WITH BLACK EPOXY COAT2PTS, 0.290" (7.37MM)

50V DC4AVIA #10-32 SCREW

IP67-20º TO 158º F (-29º TO 70º C)


PVC-UL STD 94-VOPV-UL STD 94-VONICKEL PLATED BRASSYELLOW, #16 AWG, PC JACKET, PVCCONDUCTOR INSULATION OVER 65X#34 COPPER STRANDING, UL STOOWCSA ST0.42" (10.77MM)

600V AC / DC10A

IP68, NMEA 6P-4º TO 221º F (-20º TO 105º C)

Mini Power Tap and Power Cables

Specifications:

Products:

FUSE

JUNCTION 1 JUNCTION 2

FUSE

PIN 1 NET_CPIN 2 NET_SPIN 3 NET_SPIN 4 NET_C

GRN

GRN

GRN

RED

1 2 3 4

JUNCTION 4

PIN 4 NET_H

PIN 5 NET_L

PIN 1 DRAIN

PIN 2 NET_S

PIN 3 NET_C

JUNCTION 4

JUNCTION 3

PIN 5 NET_L

PIN 4 NET_H

PIN 3 NET_C

PIN 2 NET_S

PIN 1 DRAIN

JUNCTION 3

PART NUMBER

MDN-PT2104000A01M010104000A01M050104000A01M100

DESCRIPTION

Mini PowertapMini Power Cordset - 1 MeterMini Power Cordset - 5 MeterMini Power Cordset - 10 Meter

PowertapSchematic

www.maretron.com

• Connects power supply to NMEA2000® Trunk Line in convenientplug/play fashion

• Replaceable fuses to protect busand connected components fromexcessive current

• Provides LED status indication ofpower and correct polarityconnection for simple diagnostics

0.56” REF[4.22mm]

01.00” REF[25.40mm]

LENGTH

7/8”-16UN-2B

.38” REF[9.65mm]

2.25” REF

[57.15mm]

2.21” REF

[56.13mm]

Power Cable Profile

MINI TEES

Mini TeesA Tee is used to tap into the trunkline for adding a drop connection.Two Mini Tees are available: 1) aMini Tee with Mini connectors forthe trunk and drop lines, and 2) a Mini/Micro Tee with Miniconnectors for the trunk lines and aMicro connector for the drop line.

• Gold contacts for greatestreliability

• Keyed connectors for error-freeconnections





CONTACT PLATING:



APPROVALSNMEA:

TPETPENICKEL PLATED BRASS

50VMINI DROP – 8A / MICRO DROP – 4APHOSPHOR BRONZE ALLOYGOLD OVER NICKEL ALLOY

MINI – IP67 / MICRO – IP68, NEMA 6PMINI – -4º TO 176º F (-20º TO 80º C)MICRO – 32º TO 140º F (0º TO 60º C)


Mini Tees

Specifications:

Profile Views

Products:

2.83" REF.[71.9mm]

ø1.00" REF.[25.4mm]

ø1.00"[25.4mm]

2.30"[58.4mm]7/8"-16UN

MALE MINI-CHANGE

FEMALE MINI-CHANGE

7/8"-16UN

1.00"[25.4mm]

FEMALE MINI-CHANGE

7/8"-16UN

2.828” [71.83mm]

7/8”-16UNFEMALE

MINI-CHANGE7/8”-16UNMALEMINI-CHANGE

01.000 [25.40mm] 2 PLACES

0.177” [4.50mm] 2 PLACES

1.000” [25.40mm]

.570” [14.48mm]

1.366 [34.70mm]

M12 FEMALE CONNECTORWITH INTERNAL THREAD

PART NUMBER

MDN3020MDND3020

DESCRIPTION

Mini TeeMini/Micro Tee

Mini Tee

Mini/MicroTee

MINI 90° ELBOW

Mini 90° ElbowThe Mini Elbow is used in spotswhere it is impossible to bend a cordset around tight corners. The elbow easily connects to a tee or double-ended cordsetsmaking 90° turns practical at the end or anywhere along the line.

• Mounting holes for securefastening of cabling system

• Waterproof seals for reliableconnections

• Nickel plated brass ideally suitedfor harsh marine environment

Mini 90° ElbowProfile View





CONTACT PLATING:



APPROVALSNMEA:

TPETPENICKEL PLATED BRASS

50V8APHOSPHOR BRONZE ALLOYGOLD OVER NICKEL ALLOY

IP67-4º TO 176º F (-20º TO 80º C)


Specifications:


M115032A

DESCRIPTION

Mini 90° Male to Female Connector

FEMALEw/ Internal ThreadsProfile and Face View

MALEw/ External ThreadsProfile and Face View

4-WHITE

5-BLUE

3-BLACK

2-RED

1-DRAINSILVER

2

1

3

5

4

1-DRAIN

2-RED 3-BLACK

4-WHITE

5-BLUE

Copyright 2007 Maretron, LLP. All rights reserved. As Maretron isconstantly improving its products, all specifications are subject to

change without notice. Maretron’s products are designed to beaccurate and reliable; however, they should be used only as aids to

navigation and vessel monitoring, and not as a replacement fortraditional navigation and vessel monitoring techniques. A prudent

captain or navigator never relies on a single source for navigation orsystem monitoring information. “NMEA 2000” is a registered

trademark of the National Marine Electronics Association.

N2KMETER

N2KMeterThe N2KMeter enables trained anduntrained personnel to diagnose andtrouble-shoot network installationsquickly and easily. Completely passiveon the network, the meter analyzes bothdata and power lines on the network. Inseconds, both network-wide anddevice- specific traffic as well as powermonitoring information is captured anddisplayed on a simple user interface.

www.maretron.com

• Diagnostic tool for NMEA 2000®

networks

• Evaluates physical layer devicefunctions on a network

• Data at boat can be locked in andthen evaluated later on bench

MINI BULKHEAD FEED-THRU

Mini Bulkhead Feed-ThruThe Bulkhead Feed-Thru allowsease of installation through panelsor bulkheads and establishes future connection points in a networkinstallation. The bulkhead feed-thrualso maintains the integrity ofwatertight bulkheads by providing awaterproof seal and connection.

• Features rugged keyways forpositive alignment of connections

• Waterproof rated to IP68

MECHANICALSHELL:

GASKET MATERIAL:THRUST WASHER:

LOCKNUT MATERIAL:INSERT:


AMPERAGE:



APPROVALSNMEA:

NICKEL-BRASSNE0PRENENYLONBRASS ALLOYPVC – UL STD 94V

300V AC/DC8A

IP 68, NEMA 6P-4º TO 176º F (-20º TO 80º C)


Mini Bulkhead Feed-Thru

Specifications:


M1R5030

DESCRIPTION

Mini Bulkhead Feed-Thru

Profile View

Cutout

MECHANICALPOWER SUPPLY:

CONNECTORS:BAND RATES:

ANALOG ACCURACY:

ANALOG RANGE:

ANALOG SAMPLE RATE:

SIGNAL ERROR THRESHOLD:

BUS LOAD MEASUREMENT:BUS MESSAGE RATE

MEASUREMENT:

ERROR RATE MEASUREMENT:

APPROVALSNMEA:

NETWORK 7 - 30VDC < 90MABATTERIES 2 X AA ALKALINE BATTERIES6 HOURS OF OPERATION APPROX. 1 YEAR DATA RETENTIONMICRO CONNECTOR125K, 250K AND 500K (AUTO-DETECT)BUS POWER±100MV, BUS SIGNAL±20MVBUS POWER 0 TO 25V WITH OVER/UNDER RANGE INDICATION BUS SIGNAL -5 TO 10V WITH OVER/UNDER RANGE INDICATIONBUS POWER 1 KHZ BUS SIGNAL IDEALSAMPLE PT±250NS NMEA 2000® SPEC FOR NETWORK POWERDETECTS BUS IDLE IN REAL TIME

DETECTS 100% OF INDIVIDUAL CANFRAMES IN REAL TIMEDETECTS 100% OF INDIVIDUALERROR FRAMES IN REAL TIME

NMEA 2000® CERTIFIED

1. Plug in and set N2KMeter rotary switch to “autosearch”

2. Identify network health

• happy face = healthy

• neutral face = nominal

• sad face = faulty

3. Scroll through faults. Refer to user manual to link these faults to most likely network problems or freeze and lock settings for review back at the shop by an NMEA 2000® expert.

1. Scroll through NMEA 2000® parameters for each activeNMEA 2000® node (mac id)• Communication errors (rate, cumulAtive #)• Bandwidth (% of full usage)• Power supply and shield voltages• Data bit quality (dominant, recessive, +, -,

differential voltage, cmv)

2. Check values (both numeric and icons)

• Happy face = within spec

• Neutral face = very close to limit

• Sad face = out of limit

3. Refer to user manual to link these faults to most likely network problems

N2KMeter

Specifications:


N2KMETER-01

DESCRIPTION

Diagnostic Meter w/1m Micro Cordset

Electrician Mode (Simple)

Expert Mode (Advanced)

Mini Termination ResistorsTermination Resistors are requiredon a NMEA 2000® network and areplaced at each end of a networktrunk cable. Like the double-endedcordsets, the termination resistorsare waterproof and continue tofunction even while submerged inthe bilge.

MINI TERMINATION RESISTORS

• Diagnostic versions indicatecorrect polarity at a glance toensure power connections havebeen made properly

• Screw connector for positiveconnection

• Termination resistors are used toterminate both ends of the trunk line

Male

Female


MOLDED BODY:

COUPLING NUT:



CONTACT PLATING:LED:



APPROVALSNMEA:

PVCDIAGNOSTIC – CLEAR PVCSTD – GRAY PVCNICKEL PLATED BRASS

50V8APHOSPHUR BRONZE ALLOYGOLD OVER COPPER ALLOYGREEN – PROPER POLARITYRED – IMPROPER POLARITY

IP6832º F TO 140º F ( 0º C TO 60º C)


Mini TerminationResistors

Specifications:

Products:

1-NO CONNECTION

2-NO CONNECTION

3-NO CONNECTION

5-RESISTOR

4-RESISTOR

121

1-NO CONNECTION

2-NO CONNECTION

3-NO CONNECTION

5-RESISTOR

4-RESISTOR

121

PART NUMBER

MDN100MDN150MDN100LMDN150L

DESCRIPTION

Mini Male Termination ResistorMini Female Termination ResistorMini Male Termination Resistor w/LEDMini Female Termination Resistor w/LED

Female/Male

Copyright 2007 Maretron, LLP. All rights reserved. As Maretron is constantly improving its products, all specifications are subject to change withoutnotice. Maretron's products are designed to be accurate and reliable; however, they should be used only as aids to navigation and vessel monitoring,and not as a replacement for traditional navigation and vessel monitoring techniques. A prudent captain or navigator never relies on a single source

for navigation or system monitoring information. “NMEA 2000” is a registered trademark of the National Marine Electronics Association.

You can connect devices using one of two cable options:

Mini - This is commonly used for the trunk line on thenetwork because of its greater current carrying capacity (8amps) as opposed to Micro cable (4 amps). Mini cable has anoutside diameter in the range from 0.41 to 0.49 inches. Itsmaximum installed bend radius is 7x the cable diameter. Youcan also use this type of cable for drop lines.

Micro - This cable type is typically used as the drop lineconnecting devices to the main trunk line with an outsidediameter in the range from 0.24 to 0.28 inches. Micro cable hasa smaller diameter and is more flexible than mini cable with aninstallation bend radius of 7x the cable diameter. Smallernetworks use this type of cable for both the trunk and drop lines.

You construct the trunk line using double-ended cordsetsconnected between tees or taps. One end of the cordset hasa male connector with male pins while the other end of thecordset has a female connector and female receptacles. Theconnectors are keyed so they can only connect to each otherin one way. As an alternative to double-ended cordsets, youcan make your own trunk line using bulk cable and field-attachable connectors. If you decide to add equipment later,

you can simply disconnect a cordset from a tee, add anothertee directly to the existing tee, re-connect the cordset and addthe new component to the system using a drop cable.Alternatively, you could cut the trunk line, add two field-attachable connectors and insert a new tee. Trunk lines canalso be run up to watertight bulkheads and connected to awaterproof bulkhead feed-thru connector to maintain theintegrity of watertight compartments.

To drop off the trunk line, you connect a device using a teeconnector. Daisy chaining of devices is not allowed, as it is arequirement to be able to remove a component from thenetwork without affecting any other device. This allows you toremove a device for servicing while the rest of the networkremains operational. Multi port boxes are also available whereinstruments tend to be clustered, around the helm for example.

1.2 Maximum Cable DistanceThe cable distance between any two points in the cablesystem must not exceed 200 meters (656 feet) for the Minicable or 100 meters (328 feet) for the Micro cable.

For most cases, the maximum distance should be measuredbetween termination resistors. However, if the distance from

Figure 2Maximum Cable Length Determination

Multi Port Box

Maretron NMEA 2000 ®

Network Installation GuideInstalling an NMEA 2000® NetworkInstalling an NMEA 2000® network consists of inter-connecting NMEA 2000® electronic devices using plug-and-play cables and connectors. The following pages provide abrief description of how to setup a NMEA 2000® networkusing five basic steps:

1. Cable and Connector Network Basics2. Installing Terminators3. Supplying Power4. Grounding the Network5. Checking the Network

Please note that this installation guide contains a briefdescription of the basic concepts of installing an NMEA2000® network and Maretron suggests that you consult atrained professional for any installation. You can learn moreabout installing NMEA 2000® networks by contacting the

National Marine Electronics Association (NMEA) atwww.nmea.org and consulting the following documents:

• NMEA 2000® Standard for Serial-DataNetworking of Marine Electronic Devices

• NMEA Installation Standards

1. Cable and Connector Network Basics1.1 Network TopologyThe NMEA 2000® cable system uses a trunk (sometimes referredto as the backbone) and drop line topology as shown in Figure 1.

The NMEA 2000® cable system includes five wires within asingle waterproof cable: two signal wires, power and groundwires, and a drain wire. The drain wire shields the signal, power,and ground wires from external Radio Frequency Interference(RFI) and helps reduce RFI emission from the cable.

Figure 1NMEA 2000®

Network Topology

Figure 4Mini Powertap

Figure 5Micro Powertap

1.7 NMEA 2000® ConnectorsConnectors attach cables to devices or other components ofthe NMEA 2000® cable system. This allows the network to becompletely “plug-and-play”. Connections can be made withpre-molded cordsets or with field-attachable connectors. Thefollowing diagram shows the pins found within Mini connectorand the Micro connector and the corresponding wire colorsfor those pins.

2. Installing TerminatorsTermination resistors are attached to each end of the trunkcable to reduce reflections of the communication signals onthe network. If you do not use termination resistors asdescribed, the network will not operate properly. Terminationresistors are typically connected directly to the last tee on thetrunk line although they can be connected to a cordsetextending from the last tee on a trunk line.

3. Supplying PowerNMEA 2000® networks can use a power supply originatingfrom a single-point connection to the vessel’s 12 volt batteryor one or more isolated power supplies distributed along thenetwork, but not a combination of battery and power supplyconnections. For the purpose of this installation guide, wewill focus on the power source being a single-pointconnection to the vessel’s battery. Over current protectionshould be provided and should be sized in accordance withABYC E-11, AC and DC ELECTRICAL SYSTEMS ON BOATS,taking into consideration the smallest gauge of cable beingused for the backbone or drop cables. The NET-S wire isconnected to the positive side of the battery while NET-C isconnected to the negative side of the battery.

3.1 Mini Power ConnectionPower is supplied to a Mini trunk line via a Powertap that isshown in Figure 4. Note that the Mini power cable does nothave a shield wire as this connection is made to the screwterminal on the Powertap itself.

3.2 Mini Power CapabilityAlthough Mini cable is rated to 8 amps, the cable system cansupport a total load of more than 8 amps. For example, 16amps of power could be supplied to the middle of the trunk

Multi Port Box

a trunk line tee to the farthest device connected to the trunkline is greater than the distance from the tee to the nearestterminating resistor (TR), then you MUST include the drop linelength as part of the cable length in your maximum cabledistance calculation. Figure 2 shows an example where both5 meter drops must be included in the maximum cabledistance since the drops are longer than the distance fromthe tee to termination resistor.

1.3 Cumulative Drop Line Length The cumulative drop line length refers to the sum of all droplines, Mini, or Micro cable in the cabling system. This sumcannot exceed 78 meters (256 feet). Figure 3 shows anexample using four drop tees and two multiport drops toattach 11 devices to the trunk line. The cumulative drop linelength is 37 meters (122 feet) and no single device is morethan 6 meters (20 feet) from the trunk line.

1.4 Maximum Drop Line LengthThe maximum cable distance from any device on a branchingdrop line to the trunk line is 6 meters (20 feet).

1.5 Maximum Number of DevicesA maximum of 50 physical devices shall be connected to thenetwork, and the disconnection of any device shall notinterrupt any other device on the network.

1.6 NMEA 2000® CableBoth the Mini and Micro cables contain five wires: Onetwisted pair (red and black) for 12VDC power, one twistedpair (blue and white) for signal and a drain wire (bare).

The following table shows the color, name, and usage foreach wire contained within the cable.

Color Name Usage

White NET-H Signal

Blue NET-L Signal

Bare SHIELD Drain

Black NET-C Ground

Red NET-S Power

Figure 3Maximum Cumulative Drop Line LengthDetermination

5 meters 20 meters 5 meters 0.3 meters 0.3 meters

Speed Log

0.3 meters2 loads

TRTR

0.3 meter2 loads

Depth Repeater

0.3 meter2 loads

Compass Display

2 meters1 load

Electronic Compass

Autopilot

1 meter1 load

Power fromBattery

TR

Trunk Line

Drop Line

Device or Node

Drop Tee

4. Ground the NetworkThe NMEA 2000® network should be grounded at ONE location.Grounding at more than one location may produce groundloops, which can cause problems with communications on thenetwork. In addition to the ground wire, connect the drain orSHEILD wire at the supply ground location and NO other place.

5. Checking Your NetworkVerify that the network has been correctly designed andinstalled by reviewing the following checklist:

• Number of devices does not exceed 50• Maximum Mini cable distance between any

two devices does not exceed 200 meters (656 feet)• Maximum Micro cable distance between any

two devices does not exceed 100 meters (328 feet)• Maximum cumulative drop line length does not

exceed 78 meters (256 feet)• No drop should be greater than 6 meters (20 feet)• Termination resistors are installed on both ends of

the trunk• The network is grounded at a single location• The SHIELD wire is connected to a single point,

the supply ground

If you are having difficulties with the network make sure tocheck the following most common network problems:

• More or less than two terminating resistors • Loose connections, make sure that all connectors

are securely fastened • Excessive trunk line length-especially with Micro cable • Excessive drop line cable length • Improper shield and ground connection at the

power supply • Shorts and opens in field-attachable connectors • Failure to perform power distribution calculations for

new installations and when adding new devices • Using a typical device current rather than maximum

current for power distribution calculations

In order to insure the proper installation and configuration ofan NMEA 2000® network, it is a good idea to have availableat least one N2KMeter. The N2KMeter greatly simplifiesnetwork diagnostics and can detect many fault conditionsincluding:

• Opens and shorts• Incorrect topology• Bad nodes• Bad termination• Improper shield connection• Intermittent problems• Excessive scan rate• Common mode voltage

Figure 7Mid-Powered Network

TR TR

Depth Sounder

0.3 meter 2 loads

0.3 meter 2 loads 2 meters

1 load

Compass Display

0.3 meter 2 loads

Electronic Compass

2 meters1 load

Speed Log

10 meters

2 meters

5 meters.03 meter .03 meter

AutopilotPower from

Battery

TR

Trunk Line

Drop Line

Device or Node

Drop Tee

where 8 amps is supplied to both sides of the power tap. ThePowertap can handle large loads as long as no more than 8amps is drawn through any single segment of the trunk line.However, cable resistance may limit your application to lessthan 8 amps.

3.3 Micro Power ConnectionLike the Mini power connection, power is supplied to a Microtrunk line via a Powertap, which is shown in Figure 5.

3.4 Micro Power CapabilityMicro cable is rated to 4 amps but like Mini cable, strategicplacement of the power source could support higher current.For example, 8 amps of power could be supplied to themiddle of the trunk where 4 amps is supplied to both sides ofthe power tap. It can handle large loads as long as no morethan 4 amps is drawn through any single segment of the trunkline. However, cable resistance may limit your application toless than 4 amps

3.5 End-Powered NetworkEnd-powered networks are typically seen on smaller vesselswith only a few NMEA 2000® devices. Figure 6 shows an end-powered network.

3.6 Mid-Powered NetworkA mid-powered network is typically found on larger vessels

and is any network where the power is connected to thenetwork at some location other than at the end. This networkconsists of two legs, one leg extending in each direction fromthe power insertion point. Figure 7 shows a mid-powerednetwork.

3.7 Maximum Power Supply Voltage DropThe NMEA 2000® network is designed to work properly aslong as there is no more than a 1.5 volt difference in thepower supply voltage between any two devices on the network. Therefore, you should perform an estimate of thevoltage drop across a network using the following equation:

Voltage Drop = 0.1 x Network Loads x Network Length x Cable Resistance/100

Where: Network Loads is sum of Load Equivalent Numbers (LEN) for all devices (see device nameplate)Network Length is in metersCable resistance is in ohms/100 meters

(see pages 1 and 9 specifications)

Power supply voltage drop estimates resulting in less than1.5 volts across the entire network require no further analysis.Likewise, estimates ranging between 1.5 and 3.0 volts requireno further analysis as long as a mid-powered network isused. Occasionally, estimated power supply voltage dropswill occur outside these limits and will require furtherconsideration through detailed calculations by certifiedtechnicians.

Figure 6End-Powered Network

Documents

PRODUCT CATALOG - Maretron 2007 Catalog.pdf · 2017-04-19 · PRODUCT CATALOG 2007. Maretron designs, ... fuel economy and reduced wear and tear on your autopilot since S-turning