PRODUCT CATALOG - allsafe.netallsafe.net/files/All_Safe_Catalog.pdf320 Carbon Dioxide 350 Carbon Monoxide 660 Chlorine 510 Cyclopropane 350 Deuterium 350 Ethane ... 100 lb. Steel LPG

PRODUCT CATALOG

Edition 2.12016

LPG/Propane & Cutting Fuels

Industrial & Welding

Medical

Beverage

SCBA & Life Safety

Services

http://allsafe.net

2 [email protected] / 866-958-3473

Click on a listing to go to that section or

page.

SUMMARY Table of Contents ................................................................................2 Company Overview ...........................................................................3 Chart: CGA Selection by Gas Service ...........................................4

LPG/PROPANE & PROPYLENE ...............................................5–17 LPG/Propane Cylinders ............................................................. 6–7 Propylene Cylinders ..........................................................................8 Valves & Components ...............................................................9–16 Replacement Parts .......................................................................... 17

INDUSTRIAL & WELDING ...................................................... 18–53 Cylinders .....................................................................................20–28 High Pressure Aluminum ...................................................... 20 High Pressure Steel .........................................................21–22 Breathing Air ............................................................................. 23 Acetylene .................................................................................... 24 CO2 .......................................................................................25–26 Cryogenic Liquid & Dewars ................................................. 27 Propylene .................................................................................... 28 Valves ...........................................................................................29–41 Chart: Valve Part Number Designation ...................................... 29 Acetylene ............................................................................30–31 Breathing Air ............................................................................. 32 CO2 ............................................................................................... 33 Cryogenic .................................................................................... 34 HVAC ............................................................................................ 34 Hydrogen .................................................................................... 35 Industrial ..................................................................................... 36 Inert Gases .................................................................................. 37 Medical Mix & Post Valves (see Medical Section) .........58–59 Nitrous Oxide ............................................................................ 38 Oxygen Service Valves ........................................................... 39 Propylene (see LPG Section) ........................................................ 15 RPV Valves .................................................................................. 40 Sulfur Hex ................................................................................... 40 Refrigerant ................................................................................. 41

INDUSTRIAL & WELDING (continued) Regulators ..................................................................................42–44 CO2 ............................................................................................... 42 Medical Oxygen (See Medical Section) ..............................60–61 Nitrogen....................................................................................... 42 Parts & Assemblies .................................................................. 43 HVAC , Welding & Oxygen ................................................... 44 O-Rings, Safeties & Valve Replacement Parts .............45–50 O-Rings ........................................................................................ 45 Replacement Parts ..........................................................46–48 Carry Handles ........................................................................... 49 Chart: Safeties (PRD) Selection ..................................................... 50 Chart: ISO vs. DOT High Pressure Cylinders .....................51–53MEDICAL ...................................................................................... 54–61 Cylinders .....................................................................................56–57 Valves, Post Valves & Cylinder Carts ...............................57–59 Medical Regulators .................................................................60–61BEVERAGE ................................................................................... 62–81 Kegs ...............................................................................................62–66 Ball Lock & Pin Lock ........................................................63–65 Sankey & Pumps ...............................................................66–67 CO2 & Nitrogen/Beer Mix Cylinders ..............................68–69 Beverage Regulators ...................................................................... 70 Keg Components & Parts .....................................................71–77 Brewing Equipment ................................................................78–81 Brewing Kettles & Pots ................................................................. 81 Kegging Kits ................................................................................82-83SCBA & LIFE SAFETY................................................................ 84–88 SCBA Cylinders ................................................................................ 85 SCBA Valves....................................................................................... 86 Fire Extinguishers ....................................................................87–88

SERVICES ..................................................................................... 89–91 Propane/LPG Cylinders & Services .......................................... 90 CylinderRecertification&Recycling ....................................... 91

TERMS AND CONDITIONS ................................................... 92–95

TABLE OF CONTENTS

INTRODUCTIONTABLE OF CONTENTS

3 [email protected] / 866-958-3473OVERVIEW

Benefits of Working with All Safe Global

1. Exclusive product lines and unique product combinations

2. Quick order turnaround

3. Cost advantages through volume purchasing power and value-driven supply chain

4. Globalfulfillmentcapability

5. Unique product knowledge and application-driven technical support

INTRODUCTIONOVERVIEW

Products & Services

The company offers highly competitive products and services across a broad range of markets. Primary products include a wide selection of cylinders, valves, O-Rings, beer kegging and brewing equipment, firesuppressionequipment,breathingair,andpartsforcompressedgas applications, including high-pressure welding, beer and beverage, medical and specialty, and low-pressure refrigerant and propane. Services include DOT-authorized hydrostatic cylinder recertification,refurbishing,recycling, and disposal. Financing assistance is also available.

Before using this catalog, please refer to the safety information located in the back of the catalog.

Website: www.allsafe.net Toll Free: 866-958-3473 Fax: 651-408-7163

Company Overview

All Safe Global, Inc. is a Minneapolis, MN-based master distributor of equipment and accessories for compressed gas delivery,beverageproduction,andfiresuppression.Thecompanyprovides a broad selection of services and hard goods to multiple end-use gas markets.

All Safe Global, Inc. has been serving U.S. and select international markets since 1976. The company is a leading, nationally recognized DOT test facility and compressed gas equipment supplier, with a robust combination of service capabilities and a largeinventoryforrapidorderfulfillmentandquickturnaround.

The company’s mission is to be the premier provider of value-driven, high-quality gas and liquid delivery solutions by excelling atglobalsourcing,fulfillment,andcustomerservice.AllSafeGlobal pledges to provide customers with a competitive advantage through its large-scale operations, distinctive products and services, and extensive supply chain.

4 [email protected] / 866-958-3473CGA – GAS SELECTION CHART FOR FITTINGS

INTRODUCTIONCGA – GAS SELECTION CHART FOR FITTINGS

MIXED GASESCGA Fittings Minor Component Major Component

240/660/705 Ammonia Nitrogen

350 Butane Nitrogen

296 Carbon Dioxide Oxygen

580 Carbon Dioxide Helium or Nitrogen

580 Carbon Dioxide Helium

and/or Nitrogen

330 Chlorine Nitrogen

350 Diborane Argon, Helium,

Hydrogen, or Nitrogen

580 Freon-12 Nitrogen

296 Helium Oxygen

350 Hexane Nitrogen

350 Isobutane Nitrogen

350 Krypton-85 Carbon Monoxide,

Hydrogen, or Methane

330 Krypton-85 Chlorine

540 Krypton-85 Oxygen

580 Moisture Argon, Helium, or Nitrogen

660 Nitric Oxide Nitrogen

660 Nitrogen Dioxide Air or Nitrogen

590 Nitrous Oxide Nitrogen

590 Oxygen Nitrogen or Helium

350 Propane* Nitrogen or Helium

660 Sulfur Dioxide Air or Nitrogen

590 SulfurHexaflouride Argon,Helium,orNitrogen

350 SulfurHexaflouride Hydrogen

350 Tritium Argon, Carbon Dioxide,

Hydrogen, Methane, Neon,

Nitrogen, Krypton, or Xenon

PURE GASESCGA Fittings Pure Gases

510/300 Acetylene

590/346/347/702 Air

240/660/705 Ammonia

580/680/677 Argon

350 Arsine

320 Carbon Dioxide

350 Carbon Monoxide

660 Chlorine

510 Cyclopropane

350 Deuterium

350 Ethane

350 Ethylene

510 Ethylene Oxide

580/680/677 Helium

350/695/703 Hydrogen

330 Hydrogen Chloride

330 HydrogenSulfide

580 Krypton, KR-85

350/695/703 Methane

510 Methyl Chloride

580/680/677 Neon

580/680/677 Nitrogen

326 Nitrous Oxide

540/577/701 Oxygen

350 Phosphine

510 Propane

350 Silane

668/660 Sulfur Dioxide

590 SulfurHexaflouride

580/680/677 Xenon

MEDICAL GASES

CGA Fittings Gas Type

870 Oxygen

940 CO2

930 Inert / Nitrogen

960 Inert / Nitrogen

910 Nitrous Oxide

950 Breathing Air

965 Medical Gas Mixtures

973 Medical Gas Mixtures

It is the user’s responsibility to familiarize him/herself with the specific properties and dangers of the gases used for their application. The valve outlet to be used with a cylinder for a particular use is specified by the Compressed Gas Association (CGA). CGA specifications can be found in the document published by the CGA entitled “CGA STANDARD V-1, Compressed Gas Cylinder Valve Outlet Connections." These specifications have been adopted to prevent the inadvertent mixing and/or improper use of gases that could be dangerous. The chart described here is a reference tool only. Consult your gas supplier or the CGA to determine the actual valve type and CGA connection required for your application. Compressed gas cylinders, valves, and the gases contained in them are dangerous and should only be handled by qualified individuals.

5 [email protected] / 866-958-3473LPG/PROPANE & PROPYLENE

All Safe Global provides a premier line of low-pressure gas cylinders. Available in capacities from 4 to 420 lbs.,

our aluminum and steel cylinders are ideal for commercial and industrial applications as well as recreational

and domestic use.

LPG/Propane and Cutting Fuel/Propylene Cylinders

• Transport Ready: All cylinders strictly conform to Department ofTransportation(DOT)specifications4BA,4BW,and4E.Mostalso conform to and are approved under Transport Canada (TC) specifications4BAM,4BWM,and4EM.

• Tested Safe: All cylinders undergo and pass rigorous strength and integrity tests, and meet or exceed all industry quality and safety requirements.

• Fully Protected: Cylinders are shot-blasted and powder-coated, for maximum durability and corrosion protection.

• All cylinders are manufactured in state-of-the-art facilities.

• Capacity gauges available on 20, 30, 40, 43, 200, and 420 lb. cylinders

• Horizontal cylinders available

• Contact us for current cylinder availability

LPG/Propane and Cutting Fuel/Propylene Valves and Components

All Safe Global also provides a range of LPG and cutting fuel gas valves and system elements engineered to precisely meet the needs of commercial, industrial, and residential users.

We offer a complete array of valves, including service, multi-purpose, fill,liquidwithdrawal,OPD,andreliefvalves.Valvesareavailableinvarious outlet styles and bonnet assemblies.

To keep you up and running, we also carry a full line of system repair and improvement items, including high-quality forklift gas system components, cylinder gauges, and cylinder and gauge replacement parts.

LPG/PROPANE & PROPYLENE


LPG/PROPANE & PROPYLENECYLINDERS

LPG/PROPANE CYLINDERS

LPG/PROPANE CYLINDERS

Size Description Part Number4.25 lb. Steel LPG Cylinder with OPD Valve 4LBLPG

5 lb. Steel LPG Cylinder with OPD Valve CYL-LP-05NS

10 lb. Steel LPG Cylinder with OPD Valve CYL-LP-10NS

11 lb. Steel LPG Cylinder with OPD Valve 11LBLPG


20 lb. Aluminum LPG Buffer Cylinder Pack with OPD Valve 20LBLP-Buffer

20 lb. Aluminum LPG Buffer Cylinder - No OPD - Filler Valve, Gauge, & Coupler CYL-LP-AL-20NS-B


33.5 lb. Aluminum Forklift Cylinder, Fixed-Liquid-Level, Relief, Gauge, Service Valve, & Quick Fill 335ALUMFLQF

33.5 lb. Aluminum Forklift Cylinder, Fixed-Liquid-Level, Relief, Gauge, Service Valve, NO Quick Fill 335ALUMFL

33.5 lb. Steel Forklift Cylinder, Fixed-Liquid-Level, Relief, Gauge, Service Valve, NO Quick Fill 335STEELFL

20LBLPG4LBLPG 30LBLPG 335ALUMFLQF 335STEELFL

CGA Fitting by Gas Service

see page 4

7 [email protected] / 866-958-3473LPG/PROPANE CYLINDERS


LPG /PROPANE CYLINDERS

Size Description Part Number40 lb. Steel LPG Cylinder with OPD Valve 40LBLPG

43 lb. Steel LPG Cylinder with 510 POL Valve CYL-LP-43NS-W

43.5 lb. Aluminum Forklift Cylinder, Fixed-Liquid-Level, Relief, Gauge, Service Valve, & Quick Fill 435ALUMFLQF

60 lb. Steel LPG Cylinder with POL Valve 60LBLPG

100 lb. Steel LPG Cylinder with 10% Valve & Collar 100LBLPG

100 lb. Steel LPG Cylinders with 10% POL Valve, Cap & Flange 100LBLPG-CAP

100 lb. Steel LPG Cylinder with POL Multi Valve 100LBLPG-MULTI

100 lb. Steel LPG Cylinder with Multi-Vapor Fill Valve & ASME 100LBLPG-MULTI-ASME

100LBLPG60LBLPG40LBLPG

8 [email protected] / 866-958-3473STEEL PROPYLENE CYLINDERS


STEEL PROPYLENE CYLINDERS

Size Description Part Number25.5 lb. 260 PSI with 10% POL Valve – Cutting Fuel/Propylene 25.5LB260PSIVLV

60 lb. 260 PSI with 10% POL Valve – Cutting Fuel/Propylene 60LB260PSIVLV

100 lb. 260 PSI with 10% POL Valve – Cutting Fuel/Propylene 100LB260PSIVLV

25.5LB260PSIVLV 60LB260PSIVLV 100LB260PSIVLV

Acetylene cylinder selection can be found in the Industrial & Welding section – page 24.

9 [email protected] / 866-958-3473LPG/PROPANE – OPD VALVES

LPG/PROPANE & PROPYLENEVALVES & COMPONENTS

LPG/PROPANE – OPD VALVES

Type Description Part NumberOPD Valve 20 lb. OPD 3/4" NGT Inlet – FPOL & 1 5/16" ACME Outlet – 4.0” Dip Tube – Type I ROPD20DT4.0

OPD Valve 30 lb. OPD 3/4" NGT Inlet – FPOL & 1 5/16" ACME Outlet – 4.7" Dip Tube ROPD30DT4.7

OPD Valve 40 lb. OPD 3/4" NGT Inlet – FPOL & 1 5/16" ACME Outlet – 6.4" Dip Tube ROPD40DT64

OPD Valve 40 lb. OPD 3/4" NGT Inlet – FPOL & 1 5/16" ACME Outlet – 7.0" Dip Tube ROPD40DT70

Gauge LP Gauge & Clip for 20 lb. OPD Valve LP-GCLIP

ROPD20DT4.0 ROPD30DT4.7


see page 4

10 [email protected] / 866-958-3473LPG/PROPANE – POL VALVES & ASME RELIEF


LPG/PROPANE – POL VALVES

Type Description Part NumberPOL Valve 50 lb. POL 3/4" NGT Inlet – 375 PSI Relief RPOL50

POL Valve 100 lb. POL 3/4" NGT Inlet – 375 PSI Relief – No Dip Tube RPOL100NODT

POL Valve 100 lb. POL 3/4" NGT Inlet – 375 PSI Relief – 10.2" Dip Tube RPOL100DT102

POL Valve POL (CGA 510) 3/4" NGT Inlet – No PRD – No Dip Tube RPOLNOPRD

LPG/PROPANE – ASME RELIEF

Type Description Part NumberRelief Valve 1 1/4" NPT ASME – 1000 Gallon RELIEF1000

Relief Valve 1" NPT ASME – 500 Gallon RELIEF500

Relief Valve 3/4" NPT ASME – 250 Gallon RELIEF250

RELIEF1000RPOL100DT102

11 [email protected] / 866-958-3473PROPANE – ASME FLOAT GAUGES


PROPANE – ASME FLOAT GAUGES

Type Description Part NumberFloat Gauge Senior Flange 30" – 420 lb. Vertical RBTGAUGESR-420

Float Gauge Senior Flange 30" – 250 Gallon Horizontal RBTGAUGESR250H

Float Gauge Senior Flange 37" – 500 Gallon RBTGAUGESR500

Float Gauge Senior Flange 41" – 1000 Gallon RBTGAUGESR1000

Float Gauge Junior Flange – 420 lb. Vertical RBTGAUGE420VERT-RO

Float Gauge Junior Flange 30" – 250 Gallon Horizontal RBTGAUGEJR250H

Float Gauge Junior Flange 37" – 500 Gallon RBTGAUGEJR500

Float Gauge Junior Flange 41" – 1000 Gallon RBTGAUGEJR1000

Float Gauge Junior Flange 48" – Horizontal RBTGAUGEJR-48H

RBTGAUGESR1000 RBTGAUGEJR500



Type Description Part NumberFloat Gauge 3/4" Threaded 41" – Horizontal RBTGAUGE-0.750-41H

Float Gauge 1" Threaded 19" – Vertical RBTGAUGE-1.0-19V

Float Gauge 1" Threaded 24" – Horizontal RBTGAUGE-1.0-24H

Float Gauge 1" Threaded 24" – 200 lb. Vertical RBTGAUGE-1.0-24V

Float Gauge 1" Threaded 30" – 420 lb. Vertical with OUT Thread Sealant RBTGAUGE420VERT-NOS

Float Gauge 1" Threaded 30" – 420 lb. Vertical with Thread Sealant RBTGAUGE420VERT

Float Gauge 1" Threaded 30" – 250 Gallon Horizontal RBTGAUGE1INCH250H

Float Gauge 1" Threaded 37" – 500 Gallon RBTGAUGE1INCH500

Float Gauge 1" Threaded 41" – 1000 Gallon RBTGAUGE1INCH1000

Float Gauge 1 1/4" Threaded – 420 lb. Vertical RBTGAUGE420VERT-RO

Float Gauge 1 1/4" Threaded 30" – 250 Gallon Horizontal RBTGAUGE1.25INCH250H

Float Gauge 1 1/4" Threaded 37" – 500 Gallon RBTGAUGE1.25INCH500

Float Gauge 1 1/4" Threaded 41" – 1000 Gallon RBTGAUGE1.25INCH1000



RBTGAUGE1INCH250H

13 [email protected] / 866-958-3473FORKLIFT – VALVES & COMPONENTS


FORKLIFT – VALVES & COMPONENTS

Type Description Part NumberASME Cap Black Cap Cover for 3/4" LPG ASME Relief CAPCOVER-LP-34

Dust Cap Black Rubber Dust Cap – 20 lb. Cylinder Compatible QCCCAP

Female Adapter Forklift Female Adapter SFLFEMADT

Fixed Liquid Fixed Liquid Level Gauge – 1/4" NPT 5.6 DT RFLFIXEDLIQGAUGE

Fixed Liquid Fixed Liquid Level Gauge – No DT SFLFIXLIQGANODT

Gasket Flat Gasket External FL Male Adapt FLGASKETEXT

Gauge 33.5 lb. 3/4" Universal Forklift Gauge RFLGAUGE333/4NGT

Gauge 33.5 lb. 1 1/4" Universal Forklift Gauge RFLGAUGE125

Gauge 43.5 lb. Brass Forklift Gauge 3/4" RFLGAUGE43-3/4NGT

Gauge 33.5 lb. Junior Flange Forklift Gauge – 4 Bolt RFLGAUGEJunior

Gauge Dial FL Gauge Dial Universal – 2 Tab Bolt Fasten FLDIAL51992

Gauge Dial FL Gauge Dial – 4 Tab Clip-On FLDIAL52591

Gauge Dial FL Gauge Dial – Flat Bottom FLDIAL2733U

SFLFILL FLDIAL51992 FLDIAL52591RFLFIXEDLIQGAUGE

14 [email protected] / 866-958-3473FORKLIFT – VALVES & COMPONENTS


SFLSERLG SFLSERSM SFLRELIEF

FORKLIFT – VALVES & COMPONENTS

Type Description Part NumberHex Plug 3/4" Hex Plug Class 300 HEXPLUG075300

Hex Plug 1 1/4" Hex Plug Class 300 HEXPLUG125300

Label UN1075 Propane Label – Flammable LABELUN1075

Male Adapter Male Adapter – 3/8" 1.25 ACME SFLMALEADT

O-Ring O-Ring Internal FL Male Adapt FLORINGINT

Pipe Away 45 Degree Forklift Pipe Away PIPEAWAY45

Pipe Away Pipe Away Plastic Cover PIPEAWAYCOVER

Relief Device 3/4” NPT 375 PSI Relief Device SFLRELIEF

Vapor Valve 3/4" Inlet Vapor Relief/Equalizing Valve 1 1/4" ACME Outlet EQ125ACME

Service Valve 3/4" NGT X 3/8" NPT – Small Body SFLSERSM

Service Valve 3/4" NGT X 3/8" NPT – Large Body SFLSERLG

15 [email protected] / 866-958-3473LPG VERTICAL & HORIZONTAL – PROPYLENE VALVES


LPG 420 LB. VERTICAL & 250 GALLON HORIZONTAL FITTINGS

Type Description Part NumberRelief Valve Relief Valve 420 lb. 1" NGT inlet RLF-420-1

Vapor Service Valve 3/4" Valve Inlet – POL/510 Outlet No DT RPOL-420NODT

Vapor Service Valve 3/4" Valve Inlet – POL/510 outlet DT7 no PRD RPOL-420DT7NOPRD

Vapor Service Valve 3/4" Valve Inlet – POL/510 outlet DT 11, 11.1, 11.7 avail no PRD RPOL-420DTXX-NOPRD

Vapor Service Valve 3/4” Vapor Service Valve Inlet – POL/510 outlet 5.9 DT RPOL-420DT5.9

Vapor Service Valve 3/4” Vapor Service Valve Inlet – POL/510 outlet 11.1 DT RPOL-420DT11.1

Fill Valve Fill Valve – See 1 1/4" or 3/4" FL Fill Valve Call

PROPYLENE VALVES

Type Description Part NumberFPOL Valve CGA510 FPOL 3/4" 435 PSI 100 lbs. PROPYLENE DT11.6 RFPOL-435-11.6

FPOL Valve CGA510 FPOL 3/4" 435 PSI 100 lbs. PROPYLENE no DT RFPOL-435-NODT

FPOL Valve CGA510 FPOL 3/4" 420 PSI 100 lbs. PROPYLENE no DT RFPOL-420-NODT

FPOL Valve LP & Propylene Liquid Withdrawal Valve 100 lb. 3/4" (POL Available) RFPOL-100-LW

RPOL-420

Acetylene Valve Section see pages 30–31.

16 [email protected] / 866-958-3473PROPANE – MULTI & LIQUID WITHDRAWAL VALVES


PROPANE – MULTI & LIQUID WITHDRAWAL VALVES

Type Description Part NumberLiquid Withdrawal LP 100 lb. – 555 Liquid Withdrawal Valve with ET (Expulsion Tube) – 11.6 DT 555LIQETDT116

Multi Valve 3/4" Inlet POL Outlet Up To 200 lb. (DOT) – 11.6DT; Vapor Outlet SPOLMULTI100-200-11.6

Multi Valve 1" INLET POL OUTLET Up To 420 lb. (DOT) 11.1DT RPOL4832011004DT111

Relief Valve 1" – 375 PSI – 420 lb. RLF-375-420

Plug POL Plug Yellow POL-PLUG

Liquid Withdrawal Liquid Withdrawal – Excess Flow Valve 3/4" Inlet SBTLIQWITH34

Liquid Withdrawal Liquid Withdrawal – Excess Flow Valve 1 1/4" Inlet SBTLIQWITH114

Fill Valve ASME Double Back Check Fill Valve 1 1/4" NPT Inlet 1 3/4" ACME Out with Cap SBTFILLVALVE

Fill Valve Double Back Check Fill Valve – 3/4” NPT 1 3/4” ACME – Cap & Strap SFLFILL

Multi Valve ASME Valve 3/4" Inlet POL-Outlet Multi Valve No Relief RBTMULTI4831001001

Multi Valve ASME Valve 3/4" Inlet POL-Outlet Multi Valve No Relief – Dual Bonnet RBTMULTI-NR-DB

Cluster Valve ASME Underground Cluster Valve ASME-CLUST1

Cluster Valve ASME Underground Cluster Valve with Liquid Withdrawal ASME-CLUST2-LW

Vapor Valve ASME Vapor Equalizing Valve 3/4" Inlet 1 1/4-5 ACME Outlet ASME4820111001Fill Valve

RBTMULTI4831001001SPOLMULTI100-200-11.6

17 [email protected] / 866-958-3473REPLACEMENT PARTS

LPG/PROPANE & PROPYLENEREPLACEMENT PARTS

REPLACEMENT PARTS

Type Description Part NumberDial ASME Dial Gauge Replacement 5-95% RBTDIAL5-95

Dial ASME Dial Gauge Replacement 10-80% RBTDIAL10-80

Dial ASME Senior Flange Dial Gauge Replacement RBTDIAL-SR

Gasket Junior Flange Gasket JRFLANGEGASKET

Screw Junior Flange Screw JRFLANGESCREW

Gasket Senior Flange Gasket SRFLANGEGASKET

Screw Senior Flange Screw SRFLANGESCREW

Screw Senior Bolts 5/16-24 x 7/8" Fillister Head Machine Screw SR-BOLT

Bolt Junior Flange Bolts JR-BOLT

Cap Yellow Plastic Cap for A40000012 & A12000004 CAPYELLOWA4A12

Adapter Adapter for Liquid Withdrawal Valves ADAPTERLIQ

Dip Tube 2033-15-12.6 ASME Dip Tube for Sherwood SDT-12.6

Dip Tube 2033-15-15 ASME Dip Tube for Sherwood SDT-15

Dip Tube Other Dip Tube Lengths Available – Contact All Safe NA

Pigtail 12" POL male-to-male Pigtail PT12-MALE

Pigtail 20" POL male-to-male Pigtail PT20-MALE

T Block POL T-Block TBLCK-LP

Bonnet Assembly ASME Lower Bonnet Assembly for Dual and Single Bonnet Valves SASMELB

Bonnet Assembly ASME Upper Bonnet, Stem, & Handwheel Assembly for Dual Bonnet Valve SASMEUB

Bonnet Assembly ASME Lower Bonnet Assembly with Kit Parts Included LPBA6775-60

Bonnet Assembly Sherwood Bonnet Assembly LPBA3329

Bonnet Assembly 100 lb. POL Valves & 420 lb. Multi Valve Bonnet Assembly SPOLB

Bonnet Assembly Plummers Pot Bonnet Assembly (Only) SPPB

Repair Kit DOT 100-200 lb. Multi Valve Bonnet Assembly Kit SDOT100BKIT

Repair Kit Sherwood Fill Valve Repair Kit SPKIT6

18 [email protected] / 866-958-3473INDUSTRIAL & WELDING

INDUSTRIAL & WELDING

CYLINDERS

High-Pressure Aluminum Cylinders

• U.S. DOT- and TC-approved

• 4 to 265 cu ft capacities

• 1800 to 3000 PSI pressure ratings

• Ships empty

• Suitable for many applications including helium, oxygen, inert and more

• Highly corrosion-resistant interior and exterior, ideal for wet gases such as CO2

• Performs well at low temperatures

• Lightweight – up to 40 percent lighter than comparable steel Tanks

• Consistent Tare Weight

• Thick, consistent walls resist damage

• Brushedexternalsurfaceprovidesalow-maintenancefinish

High-Pressure Steel Cylinders

• U.S. DOT, ISO/UN, and TC-approved


• Protective cap and neck ring included with 80 cu ft and larger cylinders

• High-quality chrome-moly steel construction

• Factory painted in standard colors

• Custom options available: cylinder paint colors, cylinder shoulder stamping, and high-quality valve installation

Acetylene Cylinders

• U.S. DOT- and TC-approved


• Asbestos-free porous mass

• Protective cap included with 75 cu ft and larger cylinders



Breathing Air Cylinders

• U.S. DOT, ISO/UN, and TC approved

• 500 and 585 cu ft capacities

• Protective cap and neck ring included

• High-strength chrome-moly steel construction



Your work depends on reliable, quality equipment. All Safe Global is dedicated to providing everything you

need to get the job done right.

Our unmatched selection of cylinders, valves, regulators, and parts comes with equally unmatched support.

Aknowledgeablesalesandtechnicalsupportstaff,worldwideshippingcapabilities,andfinancingassistance

all work together to make All Safe Global the leader in industrial gas equipment.

19 [email protected] / 866-958-3473INDUSTRIAL & WELDING

INDUSTRIAL & WELDINGINTRODUCTION

CO2 Cylinders

• U.S. DOT- and TC- approved

• 1800 PSI cylinders for CO2 and related gas blends, including beer mix

• Available in 2.5 to 100 lb. capacities, including the world’s largest portable aluminum CO2 cylinder at 50 lbs.

• Ships empty

• Can be converted for other applications such as nitrous oxide (additional charges apply)

• Highly corrosion-resistant interior and exterior, ideal for wet gases such as CO2

• Performs well at low temperatures

• Lightweight – up to 40 percent lighter than comparable steel tanks

• Consistent Tare Weight

• Thick, consistent walls resist damage

• Brushedexternalsurfaceprovidesalow-maintenancefinish

Cryogenic & Liquid Cylinders

• Continuousflowrates

• Portable and vacuum-insulated

• Full circle shock-mount ring

• Innovative non-binding contents gauge

• Polished heavy-duty outer body

• Reinforced lateral head support

• Simple operation and longer run times for improved operational efficiency

• Color-coded relief valves for different pressure settings

• 5 to 7-year warranty on vacuum (cylinder dependent)

VALVES & REGULATORS

Valves

All Safe Global stocks high-quality valves for virtually every compressedgasapplication–medical,propane,welding,firesuppression, SCBA, refrigeration, beverage, and more.

Every valve is manufactured to North American production standards, and meets our demanding requirements for quality materials and precise construction. Many of our manufacturing partnersareISO9001-certified,meetingthestrictestmanufacturingand quality benchmarks in the industry.

All valves feature:

• Robust construction, with a durable brass body and precisely machined internal components

• PressureReliefDevices(PRD)withexcellentflowandarobust,durable thread design

• Leak rate-testing with 100% helium

• Designs suitable for low- and high-pressure applications

• Cleaning for oxygen applications where appropriate

Regulators

AllSafeGlobaloffersawidevarietyofregulatorsandflowcontroldevices for CO2 and nitrogen applications. Our line of nitrogen, CO2, and HVAC regulators feature:

• Robust brass and aluminum construction, for reliable performance over time

• Safety-firstdesign,includingpressure-reliefsystemsandimpact-resistant gauges and gauge covers

• Locking adjustment valves with durable, user-friendly polycarbonate bonnets

• CO2regulatorsincludea10microncontaminantfilterandareavailableinsingleordualpressuregaugeconfigurations.

20 [email protected] / 866-958-3473HIGH PRESSURE ALUMINUM CYLINDERS

INDUSTRIAL & WELDINGCYLINDERS

HIGH PRESSURE ALUMINUM CYLINDERS

Size Gas Service Description Part Number4 cu ft Multiple 4 cu ft Aluminum Cylinder – 2216 PSI – Standard Dome 4CUFTALVLV

7 cu ft Multiple 7 cu ft Aluminum Cylinder – 2015 PSI – Standard Dome 7CUFTALVLV

20 cu ft Multiple 20 cu ft Aluminum Cylinder – 2015 PSI – No Paint 20CUFTALVLV

22 cu ft Multiple 22 cu ft Aluminum Cylinder – 2216 PSI – Custom Painted Dome 22CUFTALVLV




150 cu ft Multiple 150 cu ft Aluminum Cylinder – 2015 PSI – Carry Handle – Brushed Finish 150CUFTALVLV


Valves Installed per Customer Request

22CUFTALVLV 60CUFTALVLV

All Safe offers a unique selection of high pressure (2015 PSI to 3000 PSI) aluminum cylinders for containment of a variety of gases. Sizes range from 4 cu ft to 270 cu ft. All cylinders offered are manufactured to meet DOT and TC specifications.


see page 4

20CUFTALVLV

21 [email protected] / 866-958-3473HIGH PRESSURE STEEL CYLINDERS


HIGH PRESSURE STEEL CYLINDERS

Size Gas Service Description Part Number20 cu ft Multiple 20 cu ft Steel Cylinder – Standard Valve 20STEEL

40 cu ft Multiple 40 cu ft Steel Cylinder – Standard Valve 40STEEL

40 cu ft Multiple 40 cu ft Steel Cylinders – Standard Valve – Cap & Collar 40STEELCAP

55 cu ft Multiple 55 cu ft Steel Cylinder – Standard Valve – Cap & Collar 60STEEL


Valves installed per customer request Choose valve type, custom paint, stencil, & collar options

40STEEL 80STEEL

For more information on the differences and advantages of ISO cylinders, see pages 51–53.

All Safe offers a large selection of high pressure steel cylinders that are US DOT- and TC-approved.

All Safe carries both US DOT/TC marked cylinders and UN/ISO marked cylinders (Both approved for use in USA and Canada by the U.S. Department of Transportation & Transport Canada). We generally recommend ISO type when purchasing steel.

20STEEL

22 [email protected] / 866-958-3473HIGH PRESSURE STEEL CYLINDERS


HIGH PRESSURE STEEL CYLINDERS

Size Gas Service Description Part Number125 cu ft Multiple 125 cu ft Steel Cylinder – Standard Valve – Cap & Collar 125STEEL




Valves installed per customer request Choose valve type, custom paint, stencil, & collar options

125STEEL 150STEEL 250STEEL 300STEEL

For more information on the differences and advantages of ISO cylinders, see pages 51–53.

All Safe offers a large selection of high pressure steel cylinders that are US DOT- and TC-approved.

All Safe carries both US DOT/TC marked cylinders and UN/ISO marked cylinders (Both approved for use in USA and Canada by the U.S. Department of Transportation & Transport Canada). We generally recommend ISO type when purchasing steel.

23 [email protected] / 866-958-3473BREATHING AIR CYLINDERS


BREATHING AIR CYLINDERS

Size Gas Service Description Part Number345 cu. ft Breathing Air 345 cu ft UN/ISO cylinder with standard valve inlet - 3600 PSI 345STEEL

500 cu ft Breathing Air 500 cu ft UN/ISO Cylinder – 25E Valve Inlet – 4500 PSI 500STEEL-25E

500 cu ft Breathing Air 500 cu ft Exemption Special Permit Cylinder – 3/4"-14 NGT Valve Inlet – 4500 PSI 500STEEL

585 cu ft Breathing Air 585 cu ft UN/ISO Cylinder – 25E Valve Inlet – 6000 PSI 585STEEL-25E

585 cu ft Breathing Air 585 cu ft Exemption Special Permit Cylinder – 3/4"-14 NGT valve inlet – 6000 PSI 585STEEL

Varies Breathing Air Note: other sizes of breathing air also available. Contact your represenative for details. Varies

Standard CGA valves installed per customer request

500STEEL-25E345STEEL 585STEEL-25E

24 [email protected] / 866-958-3473ACETYLENE CYLINDERS


ACETYLENE CYLINDERS

Size Gas Service Description Part Number10 cu ft Acetylene “MC" 10 cu ft Steel Cylinder – No Cap Required ACET-MC

40 cu ft Acetylene “B" 40 cu ft Steel Cylinder – No Cap Required ACET-B

40 cu ft Acetylene “B" 40 cu ft Steel Cylinder – Includes Cap ACET-B-CAP

75 cu ft Acetylene 75 cu ft Steel Cylinder – Includes Cap ACET-75CUFT

145 cu ft Acetylene 145 cu ft Steel Cylinder – Includes Cap ACET-145CUFT

Valves installed per customer request

ACET-MC ACET-B ACET-75CUFT ACET-145CUFT

All Safe offers acetylene cylinders that are US DOT- and TC-approved.

25 [email protected] / 866-958-3473ALUMINUM CO2 CYLINDERS


ALUMINUM CO2 CYLINDERS

Size Gas Service Description Part Number2.5 lb. CO2 2.5 lb. Aluminum – CGA320 Valve – 1800 PSI 25LBALVLV

5 lb. CO2 5 lb. Aluminum – CGA320 Valve – 1800 PSI 5LBALVLV


10 lb. CO2 10 lb. Aluminum – CGA 320 Valve – 1800 PSI – Carry Handle 10LBALVLV-H


20 lb. CO2 20 lb. Aluminum – CGA320 Valve – 1800 PSI – Carry Handle 20LBALVLV


50 lb. CO2 50 lb. Aluminum – CGA320 Valve – 1800 PSI – Carry Handle or Cap 50LBALVLV


25LBALVLV 5LBALVLV 10LBALVLV 20LBALVLV 35LBALVLV 50LBALVLV

26 [email protected] / 866-958-3473STEEL CO2 CYLINDERS


STEEL CO2 CYLINDERS

Size Gas Service Description Part Number20 lb. CO2 20 lb. Steel Cylinder – CGA320 Valve – Cap 20LB-ST-VLV

50 lb. CO2 50 lb. Steel Cylinder – CGA320 Valve – Cap 50LB-ST-VLV




50LB-ST-VLV 75LB-ST-VLV

Silk screen, stamp, stencil, wrap, or adhesive label

cylinders with your brand or message. Custom neck rings

can also be installed on steel cylinders.

Please call for details.

27 [email protected] / 866-958-3473CRYOGENIC LIQUID CYLINDERS & DEWARS


CRYOGENIC LIQUID CYLINDERS & DEWARS

Size Gas Service Description Part Number600 lb. Liquid CO2 600 lb. Liquid CO2 Capacity – Primary PRD 300 PSI LC-CO2-600lb-TW

175 liter Liquid Nitrogen 175 liter Nitrogen – Withdrawal Rate 350 cfh. PRD 350 PSI LC-N2-175L-TW

4 liter Liquid Nitrogen Dewar 4 liter Capacity Liquid Nitrogen Dewar LD-4L-TW



Withdrawal Withdrawal Device Liquid Withdrawal Device for LD25 Liquid Nitrogen Dewar LDLW25

LC-CO2-600lb-TWLD-25L-TW

Cyrogenic Liquid Valves see page 34.

LD-25L-TW

28 [email protected] / 866-958-3473PROPYLENE STEEL CYLINDERS


PROPYLENE STEEL CYLINDERS

Size Gas Service Description Part Number25.5 lb. Propylene 25.5 lb. Steel Cylinder – 260 PSI with 10% Valve – Cutting Fuel 25.5LB260PSIVLV

60 lb. Propylene 60 lb. Steel Cylinder – 260 PSI with 10% Valve – Cutting Fuel 60LB260PSIVLV

100 lb. Propylene 100 lb. Steel Cylinder – 260 PSI with 10% Valve – Cutting Fuel 100LB260PSIVLV


25.5LB260PSIVLV 60LB260PSIVLV 100LB260PSIVLV

29 [email protected] / 866-958-3473COMMON VALVE PART NUMBER DESIGNATION

INDUSTRIAL & WELDINGVALVES

COMMON VALVE PART NUMBER DESIGNATION

320 61-28-7OS-C

CGA Gas Service Inlet Size PRD – (Safety) Oversize Special Features

320 3/4" NGT = 61 Burst Pressure 4,7 or 24 Turns Toggle = T 580 1" NGT = 81 See Chart RPV = Residual Valve Pressure 540 .750" UNF = 51.750 Chrome = C 346 1.125" UNF = 51.1.125 MRI = MRI Compatible 347 1/2" NGT = 41 326 Manifold 1/2" NGT = 40 etc. UN = 25E

Note: UNF type threads are “straight thread" with O-Ring seal typically used for aluminum & composite cylinders. NGT-type threads are a tapered thread typically for steel cylinders.

30 [email protected] / 866-958-3473ACETYLENE SERVICE VALVES & PLUGS


ACETYLENE SERVICE VALVES & PLUGS

Type Description Part NumberCGA200 CGA200 Acetylene Valve – 3/8" NGT – CG3 PRD – Packed & Wrench Operated S200

CGA200 CGA200 Acetylene Valve – 3/8" NGT – CG3 PRD – Hand Wheel 200HW

CGA300 CGA300 Acetylene Valve – 1/2" NGT Inlet – No PRD 30040

CGA300 CGA300 Acetylene Valve – 1" NGT – No PRD 30080

CGA300 CGA300 Acetylene Valve – 3/4" NGT – No PRD 30060



CGA510 CGA510 Acetylene Valve – 1" NGT – No PRD 51080

30080 30060200HW

Propylene valves can be found on page 15.

To determine the proper safety for your valve see our PRD selection chart on page 50.


see page 4

31 [email protected] / 866-958-3473ACETYLENE SERVICE VALVES & PLUGS


ACETYLENE SERVICE VALVES & PLUGS

Type Description Part NumberCGA510 CGA510 Acetylene Valve – 3/4" NGT – No PRD 51060

CGA510V CGA510 Acetylene Valve – 3/4" NGT – GVT Vertical Outlet with handwheel 51060T-VERT

CGA510V CGA510 Acetylene Valve – 3/4" NGT – Vertical Outlet – Wrench Style 51060-VERT-W

CGA510 CGA 510 Acetylene Valve – 3/4" NGT (+3 tours) 51060-3

VAC520B VAC520B Acetylene Valve – 3/8" NGT – CG3 PRD 520B

VAC520B VAC520B Acetylene Valve – 3/8" NGT – CG3 PRD with Handwheel 520BHW

Felt Acetylene Felt 3/8” FELT0375

Felt Acetylene Felt 3/4” FELT0750

Felt Acetylene Felt 1” FELT1000

Plug Fuse Plug – 1/8" NPT – CG3 212F – Tin Steel SGVFUSEPLUG-200B

Plug Fuse Plug – 1/4" NPT – CG3 212 – Brass SGVFUSEPLUG-212

Screen Acetylene Screen 3/8” SCREEN0375

Screen Acetylene Screen 3/4” SCREEN0750

Screen Acetylene Screen 1” SCREEN1000

51060 51060T-VERT 520BHW

Check out valve replacement parts on pages 45-49.


32 [email protected] / 866-958-3473BREATHING AIR SERVICE VALVES


BREATHING AIR SERVICE VALVES

Type Description Part NumberCGA346 CGA346 Valve – 3/4" NGT – 3000 PSI 34661-XX

CGA346 CGA346 Valve – 1" NGT – 3000 PSI 34681-XX

CGA346 CGA346 Valve – 1/2" NGT – Manifold – No PRD 34640

CGA346 CGA346 Valve – 1.125" Straight – 3000 PSI 34651-XX.1.125

CGA346 CGA346 Valve – .750" Straight – 3360 PSI 34651-XX.750

CGA347 CGA347 Valve – 3/4" NGT – .024" Oversize – 6750 PSI 34761-XX-24OS

CGA347 CGA347 Valve – 3/4" NGT – 6750 PSI 34761-XX

CGA347 CGA347 Valve – 25E – 6750 PSI 34725E1-XX


CGA702 CGA702 Valve – 1" NGT – Special Order 250+ 70281-XX


CGA702 CGA702 Valve – 25E – 9000 EURO 70225E-XX

34761-XX 70261-XX


see page 4


33 [email protected] / 866-958-3473CO2 SERVICE VALVES


CO2 SERVICE VALVES



CGA320 CGA320 Valve – 1.125" NGT – 3000 PSI 32051-XX.1.125

CGA320 CGA320 Valve – 1/2" NGT – MANIFOLD 32040-XX

CGA320 CGA320 Valve – 1/2” NGT – MANIFOLD 32040M-XX040

CGA320 CGA320 Valve – 3/4” NGT – MANIFOLD 32060-XX

CGA320 CGA320 Valve – 3/4" NGT – MANIFOLD 32060M-XX060

CGA320 CGA320 Valve – .750" UNF – 3000 PSI 32051-XX.750


32051-XX.1.125


34 [email protected] / 866-958-3473CRYOGENIC & HVAC MULTI-VALVES


HVAC MULTI-VALVES

Type Description Part NumberHVAC Multi-Valve Nitrogen Valve Regulator and Flowmeter for HVAC Purge – 250 PSI Test Pressure REGHVAC-250

HVAC Multi-Valve Nitrogen Valve Regulator and Flowmeter for HVAC Purge – 500 PSI Test Pressure REGHVAC-500

CRYOGENIC VALVES

Type Description Part NumberShut-Off Valve Cryogenic Shut-Off Valve for Liquid Cylinder Service SCRYO9001

Shut-Off Valve Cryogenic Shut-Off Valve for Liquid Cylinder Service SCRYO9002

SCRYO9001 SCRYO9002 REGHVAC-250 REGHVAC-500

REGHVAC-250 and -500 are innovative flowmeter / regulator combinations designed to test and purge HVAC systems with a single unit.

Each features preset flows for brazing, purging, and testing; tool-less cylinder connection; content gauge; and large, easy-to-read flow selector.

35 [email protected] / 866-958-3473HYDROGEN SERVICE VALVES


HYDROGEN SERVICE VALVES

Type Description Part NumberCGA350 CGA350 Valve – 1.125" Straight – 3360 PSI/212F 35055-XX-1.125

CGA350 CGA350 Valve – 1/2" NGT – 3000 PSI 212F – Leaded safety 35045-XX

CGA350 CGA350 Valve – 3/4" NGT – 3360 PSI – .004" Oversize 35065-XX

CGA350 CGA350 Valve – 1/2" NGT – Manifold 35040

CGA350 CGA350 Cap & Chain – Brass 350CC

35055-XX-1.125


36 [email protected] / 866-958-3473INDUSTRIAL SERVICE VALVES


INDUSTRIAL SERVICE VALVES

Type Description Part NumberCGA330 CGA330 Valve – Stainless – 1 1/8" Straight Thread – 3360 PSI 33051-XX.1.125

Line Valve Line Valve – 1/4" NGT – Male/Female – Compressed Air 3010

Line Valve Line Valve Panel Mount – 1/4" NGT – Male / Female – Compressed Air 3010A

Line Valve Line Valve Panel Mount – 1/4" NGT – Male / Female – 4 Port 3010-4F


CGA577 CGA 577 Valve – 3/4" NGT – 5833 PSI 57761-XX

CGA880 CGA 880 Valve – 1/2" NGT Post 88044-XX

CNG Valve CNG – 3/4" NGT – Inlet Dual – 1/4" NPT Outlet Vertical – 6750 PSI – Leaded Safety 212F CNG61V65SB

CNG Valve CNG – 3/4" NGT – Inlet Dual – 1/4" NPT Outlet Vertical – 6750 PSI – Non-Leaded Safety CNG-61V-XX

CNG Valve CNG – 3/4" NGT – Inlet Dual – 1/4" NPT Outlet Horizontal – 5833 PSI – Leaded Safety 212F CNG61H-XX-SB


Chlorine 660/820 Chlorine CL – XX Inlet – No PRD 660/820-CL-XX

Chlorine 660/820 Chlorine CL-1 Inlet– No PRD 660/820 CL-1

Manifold Valve Manifold Valve – 1/2" x 1/2" NPT – Female Valve 430CM

3010 430CM


37 [email protected] / 866-958-3473INERT GAS SERVICE VALVES


INERT GAS SERVICE VALVES


CGA580 CGA580 Valve – 1.125" UNF – 3000 PSI 58051-XX-1.125




CGA580 CGA580 Valve – 1/2" NGT Manifold – No PRD 58040

CGA580 CGA580 Valve Lever Action with 3000 PSI Gauge – 3360 PSI PRD SGV8032SYSLVRG

CGA580 CGA580 Valve Lever Action with 4000 PSI Gauge – 4000 PSI PRD 580-XX-SYSLVRG

CGA677 CGA677 Valve – 1" NGT – 10,000 PSI 67781-XX

CGA677 CGA677 Valve – 3/4" NGT – 10,000 PSI 67761-XX

CGA677 CGA677 Valve – 25E – 9000 PSI 67725E-XX


CGA680 CGA680 Valve – 25E EURO Inlet – 6750 PSI 68025E1-XX

CGA680 CGA680 / 580 Valve – 3/4" Dual Outlet 680580-XX

58061-XX 680580-XX


38 [email protected] / 866-958-3473NITROUS OXIDE SERVICE VALVES


NITROUS OXIDE SERVICE VALVES


CGA326 CGA326 Valve – 1.125" 12 UNF – 3000 PSI 32651-XX-1.125






CGA660 CGA660 Valve – 3/4" NGT – 3000 PSI Safety – Brass 66061-XX

CGA660 CGA660 Valve – 3/4" NGT – 3360 PSI Safety – Stainless 66061-ST-XX

CGA660 CGA660 Valve – 3/4" NGT – No Safety – Stainless 66061-ST-NS

CGA660 CGA660 Valve – 1.125" UNF – 3000 PSI 66051-XX.1.125

Cap & Chain CGA660 Cap & Chain Stainless 660SCC

Cap & Chain CGA660 Cap & Chain Brass CAP-660-S-C

32651-XX-1.125


39 [email protected] / 866-958-3473OXYGEN SERVICE VALVES


OXYGEN SERVICE VALVES

Type Description Part NumberCGA540 CGA540 Valve – Vertical Oxygen with Gauge Port & Handwheel 54034-XX-G

CGA540 CGA540 Valve – 3/8" NGT – 3360 PSI BS341-311-XX

CGA540 CGA540 Valve – .750" UNF – 3360 PSI 54031-XX


CGA540 CGA540 Valve – 1.125" Straight – 3360 PSI 54051-XX-1.125

CGA540 CGA540 Valve – .750 UNF – 3360 PSI 54051-xx-.750




54051-XX-1.125 54061-XX

For more oxygen service, medical mix, and medical post valves see the Medical section pages 58-59.


40 [email protected] / 866-958-3473RPV VALVES & SULFUR HEX OR COMPRESSED AIR


RPV VALVES

Type Description Part NumberFill Adapter 580 RPV Fill Adapter – Fixed Pin FA-580RPV

Fill Adapter 540 RPV Fill Adapter – Fixed Pin FA-540RPV

Fill Adapter 320 RPV Fill Adapter – Fixed Pin FA-320RPV

SULFUR HEX OR COMPRESSED AIR

Type Description Part NumberCGA590 CGA590 Valve – 1 1/8"-12 UNF-2A 3360 PSI 59051-XX

CGA590 CGA590 Valve – 3/4" NGT 3360 PSI 59061-XX

FA-580RPV 59051-XX


41 [email protected] / 866-958-3473REFRIGERANT VALVES


REFRIGERANT VALVES

Type Description Part NumberRelief Pressure Relief Valve – Low Pressure Application SRVRELIEF

CGA660 Liquid Valves – CGA660 – Low Pressure Application SRV660L

CGA660 Vapor Valves – CGA660 – Low Pressure Application SRV660V

CGA660 Dual Port Stack Valve w/Dip Tube – CGA 660 - 600 PSI RRVSTACK

Dip Tube Dip Tube Chemical & Thermal Resistant ‘Per Foot’ Min 48” Length. RRVTUBE48

ACME Y Valve Reclaim Valve Y 1/2" ACME Dual Port ACME Valve with Dip Tube- Liquid/Vapor DT12.5 RRVYACMEDT13

Y Valve Reclaim Valve Y 1/4" Flare – Liquid/Vapor DT13.0 350 PSI STD RVE16561A350B

Y Valve Reclaim Valve Y 1/4" Flare – Liquid/Vapor DT13.0 600 PSI STD RRVYFLAREDT13600

Handwheel Blue Vapor Replacement Handwheel – Rotorex 67500003

Handwheel Red Vapor Replacement Handwheel – Rotorex 67500004

RVE16561A350BSRV660L


42 [email protected] / 866-958-3473CO2 & NITROGEN PRIMARY REGULATORS

INDUSTRIAL & WELDINGREGULATORS

PRIMARY REGULATORS

Type Description Part Number

CO2 Primary Regulator High Performance Dual Gauge – No Shutoff – 0-50 PSI Range – CO2REG-DUAL-X

Dual 60 lb. & 2000 lb. Gauges

CO2 Primary Regulator High Performance – MFL Shutoff Installed – 0-50 PSI Range – CO2REG-DUAL-MFL


CO2 Primary Regulator High Performance – 1/4 Shutoff Installed – 0-50 PSI Range – CO2REG-DUAL-1/4BARB


CO2 Primary Regulator High Perfomance – MFL Shutoff with 5/16" Barb Swivel – CO2REG-DUAL-M516

0-50 PSI Range – Dual 60 lb. & 2000 lb. Gauges

CO2 Primary Regulator High Performance – Single 60 lb. Gauge – CO2REG-SINGLE-5/16BARB 5/16" Barb Outlet with Shutoff – 0-50 PSI Range

CO2 Primary Regulator High Performance – Single 60 lb. Gauge – CO2REG-SINGLE-MFL-HP

MFL Outlet with Shutoff – 0-50 PSI Range

Nitrogen Primary Regulator Nitrogen Primary Regulator – Dual Gauge – 5/16" Shutoff Installed – N2REG-DUAL-5/16BARB

0-50 PSI – 60 lb. & 3000 lb. Gauge


0-50 PSI – 60 lb. & 3000 lb. Gauge

CO2REG-DUAL-MFL CO2REG-SINGLE-MFL-HP N2REG-DUAL-5/16BARB

43 [email protected] / 866-958-3473REGULATOR REPLACEMENT GAUGES & ASSEMBLIES


ASSEMBLIES

Type Description Part NumberShutoff Assembly Shutoff Assembly – 1/4" NPT x 1/4" MFL with Check Valve OUTLET-1/4FLARE

Shutoff Assembly Shutoff Assembly – 1/4" NPT x 5/16" Hose Barb with Check Valve OUTLET-5/16BARB

Shutoff Assembly Shutoff Assembly – 1/4" NPT x 1/4" Hose Barb with Check Valve OUTLET-1/4BARB

Nut & Nipple Assemblies Nut & Nipple Assemblies: 320, 346, 347, 540, 580, 677, 680, 702, etc. Nut/Nipple

REGULATOR REPLACEMENT GAUGES

Type Description Part NumberCO2 Gauge 60 lb. 0 - 50 PSI High-Performance Replacement Gauge REG-GAUGE60

CO2 Gauge 2000 lb. High-Performance Replacement Gauge REG-GAUGE2000

CO2G60 CO2G2000 320 Nut & Nipple Assembly

44 [email protected] / 866-958-3473HVAC, WELDING, AND OXYGENATOR REGULATORS


HVAC VALVE REGULATORS

Type Description Part NumberHVAC Nitrogen Valve Regulator Nitrogen Valve Regulator and Flowmeter for HVAC Purge – REGHVAC-250

250 PSI Test Pressure

HVAC Nitrogen Valve Regulator Nitrogen Valve Regulator and Flowmeter for HVAC Purge – REGHVAC-500

500 PSI Test Pressure

WELDING REGULATORS

Type Description Part NumberCO2 / Argon Regulator Accu-trol MIG / TIG Argon & Argon / CO2 Welding Regulator REG-ACUMIG-200

BEVERAGE OXYGENATOR REGULATOR

Type Description Part NumberOxygen Regulator Beverage Oxygen Regulator “Oxygenator Kit" Amber Color HB-OXY-REG1

REGHVAC-250 REGHVAC-500 REG-ACUMIG-200


O-RINGS

O-RINGS

INDUSTRIAL & WELDINGO-RINGS, SAFETIES & VALVE PARTS

O-RINGS

Type Description Part NumberO-Ring SmallMedicalTeflonO-Ring OR1

O-Ring LargeMedicalTeflonO-Ring OR2

O-Ring SCBA #3 O-Ring Quad OR3

O-Ring Paintball O-Ring Type 1 Air Cylinders OR4

O-Ring SCBA #5 Fiber Wrap O-Ring OR5

O-Ring SCBA #6 O-Ring OR6

O-Ring SCBA #7 O-Ring OR7

O-Ring SCUBA V Type Green OR8

O-Ring Large CO2 OR9

46 [email protected] / 866-958-3473VALVE REPLACEMENT PARTS


VALVE REPLACEMENT PARTS

Type Description Part NumberDisk Sherwood TV Friction Disk STVFRICTIONDISK

Gauge 0-3000 PSI Oxygen Gauge 1/8" NGT 03000G

Handwheel Sherwood TV Plastic Handwheel Washer PW-13-S

Handwheel Sherwood TV Lexan Handwheel STVHWL

Handwheel Sherwood TV Aluminum Handwheel STVHWA

Handwheel Sherwood GV Aluminum Handwheel HWA

Handwheel Sherwood GV Lexan Handwheel HWL

Nut Sherwood TV Nut STVNUT

Nut Sherwood GV Handwheel Nut NUT

STVHWLHWA HWL STVHWA

47 [email protected] / 866-958-3473VALVE REPLACEMENT PARTS


VALVE REPLACEMENT PARTS

Type Description Part NumberPacking Sherwood TV Packing STVPACKING

Plug Sherwood TV Plug & Seat Aseembly STVPLUGSEAT

Plug 3010 Line Valve Plug & Seat 3506-9

Plug Sherwood GV Lower Seat Plug – Small SEATPLUGSM

Rebuild Kit 430 Series Rebuild Kit – Non Acetylene 430KIT

Socket Sherwood Handwheel Socket SGVSOCKET

Spring Sherwood TV Spring STVSPRING

Stem Sherwood TV Stem & Tang STVSTEMTANG

Stem Sherwood GV Bonnet & Stem Assembly Oxygen Compatible BONSTEMOXY

Stem Sherwood GV Bonnet & Stem Assembly BONSTEM

Please call for parts or brands not listed here

48 [email protected] / 866-958-3473SIPHON & DIP TUBE ACCESSORIES, THREAD SEALANT


SIPHON TUBE & DIP TUBE ACCESSORIES

Type Description Part NumberAdapter 68–64 3/8" OD X 1/4" MIP Compression Adapter MIPCOMPRESSIONADAPT

Pipe 20' Copper Pipe Type L – 1/4" per Foot with Chop & Debur COPPERPIPE2025

Thread Protector Valve Protectors – Orange Snap On for CGA320 CO2 valves CO2CAP1

Rubber Boot Bottom Rubber Boot for 20 lb. CO2 Cylinder GPB-01

THREAD SEALANT

Type Description Part NumberSealant Formula 8 Tube 100g Formula8

Sealant Lox 8 Paste Jar 100g LOX8J-100g

Sealant Lox 8 Paste Jar 10g LOX8J-10g

Sealant Lox 8 Paste Plunger 100g LOX8P

SealantTape TeflonTape3/4" Teflon34

SealantTape TeflonTape1/2" Teflon12

Formula8 LOX8J-100g LOX8P Teflon34


CO2LEAKSTOPPER

CARRY HANDLES & PARTS


CARRY HANDLES & PARTS

Type Description Part NumberCarry Handle Carry Handle Luxfer Style ASA

Carry Handle Carry Handle Catalina Style ASB

Carry Handle Carry Handle KIDDE Style ASC

Carry Handle Carry Handle Threaded AST

Collar 100 lb. LPG Acetylene Const Collar CLPCO1

Collar Threaded Collar with Cap TCC

Cylinder Cap Coarse Thread Cylinder Cap – 3 1/8" x 7 Thread – North American Coarse HPCAPCOARSE

Cylinder Cap Fine Thread Cylinder Cap – 3 1/8" x 11 Thread – North American Fine CAP-HPF-SC

Fiber Washer CO2 Fiber Washer 500 pkg. CO2FIBERWasher

Handle Adapter Luxfer Handle Adapter LHA19

Leak Stopper CO2 Leak Stoppers CO2LEAKSTOPPER

Nylon Washer CO2 Nylon Washer 1000 pkg. CO2NYLONWasher

Snap Ring Snap Ring Luxfer SRA

Snap Ring Snap Ring Catalina SRB

Snap Ring Snap Ring KIDDE SRC

ASA HPCAPFINE CO2FIBERWasher

50 [email protected] / 866-958-3473PRD SELECTION CHART

INDUSTRIAL & WELDINGPRD SELECTION CHART

PRD SELECTION CHART

-XX Suffix D.O.T. Spec 3A, 3AA, D.O.T. Exemption Disc Rupture Range PSI @ Pressure Relief - 3AL Cylinders in PSI Cylinders in PSI 165°F Minimum Device Cap Stamping-26 1665 2500 2775

-28 1800 2700 3000

-32 2015 3025 3360

-35 2265 3400 3775

-38 2400 3600 4000

-39 3915 4350

-43 2670 4005 4450

-46 2900 4350 4833

-47 2950 4425 4917

-48 3000 4500 5000

-50 4860 5600

-55 3500/3600 3600 5250 5833

-63 4000 6000 6665

-65 4500 6075 6750

-78 5000 7500 8333

-85 6000 8100 9000

-95 6000 9000 10000

51 [email protected] / 866-958-3473ISO VS. DOT HIGH PRESSURE CYLINDERS

INDUSTRIAL & WELDINGISO VS. DOT HIGH PRESSURE CYLINDERS

All Safe Global: Cylinder Certification & Specification Overview

AllSafeGlobalhasbeenaU.S.DOT-certifiedhydrostatictestingfacilityfor over 40 years. In addition to offering new cylinders for sale, we performrefurbishingandcylinderrecertificationserviceswhicharecompliant with, and monitored by, the U.S. DOT. UN/ISO Cylinders are equivalent to, and arguably superior to, DOT/TC-rated cylinders for the following reasons:

1. In addition to the USA and Canada, All Safe Global’s UN/ISO cylinders are approved for use in almost every country around the world. UN/ISO is a worldwide, harmonized regulation for compressed gas cylinders that is universally recognized. This means cylinderscancrosscountrybordersandstillbefilledeasily.

2. Higher-rated capacities allow for UN/ISO cylinders to be easily integrated into a fleet of DOT/TC cylinders. UN/ISO service pressureisatorabovethecommonfillpressureofaDOTcylinderwitha+10%overfilldesignation.Also,ourUN/ISOcylinderscontainfriendly markings with service pressures rated in PSI and bar.

3. UN/ISO cylinders remain in circulation at maximum capacity for the life of the tank. Due to the higher design ratings for pressure, UN/ISO cylinders do not require REE (Rejection Elastic Expansion) testing to achieve the common cylinder service pressures used and approved in North America. While REE is a valuable and stringent test, DOT/TC cylinderswilloftenhavetheirmaximumfillpressureratingsreducedaftertesting.Thisisveryinconvenientforfillers,becausetheyliketofillmanycylindersatoncewiththesamepressure.

Facts and Differences About UN/ISO and DOT/TC Stamping Requirements:

1. GasfillersintheUSAcanlegallyfillUN/ISOandDOT/TCcylindersthat meet CFR regulations.

2. All Safe Global UN/ISO and DOT/TC cylinders are manufactured in the U.S. and other foreign countries.

3. UN/ISO cylinders have a higher working pressure and gas volume capacity than, DOT/TC cylinders.

4. DOT/TC-stamped cylinders are acceptable for transport to, from, and within the U.S. UN/ISO-stamped cylinders must have “USA" country-of-approval marking to be acceptable for transport to, from, or within the U.S. All Safe Global’s UN/ISO cylinders are stamped “USA".

5. DOT/TC markings must conform to the applicable requirements of 49 CFR 178.35, and UN/ISO pressure receptacles markings must conform to the applicable requirements of 49 CFR 178.71.

6. DOT/TC and UN/ISO cylinder markings are expressed in conventional units.

7. DOT/TC date of manufacture is expressed as month-year (10-13), while UN/ISO is stamped year (4 digits) and month (2013/01)

8. DOT/TC stamps service pressure only in PSI. All Safe Global UN/ISO cylinders have stamps for both service pressure (PW) and test pressure (PH) in bar and PSI.

9. DOT/TCdoesnotrequireinletthreadprofiletobestamped.UN/ISOrequirestheinletthreadprofiletobestamped.

10. The manufacture approval number granted by U.S. Department of Transportation (Pipeline and Hazardous Materials Safety Administration) is required by both the DOT/TC and UN/ISO. If manufactured in same facility, the approval number will be the same.

11. Third-party independent inspection is required for both DOT/TC and UN/ISO designs.

12. There is no plus or star for UN/ISO cylinders. The service pressure isalreadyatorabovethe10%overfillauthorizedforselectgasservices by DOT/TC.

52 [email protected] / 866-958-3473ISO VS. DOT HIGH PRESSURE CYLINDERS


What is the Requalification Frequency for UN/ISO Cylinders, How are They Requalified, and What are the Markings?

1. UN/ISOpressurereceptaclesmustberequalifiedatleastonceevery 10 years, except for composite cylinders and pressure receptacles used for certain specialized service which must be requalifiedevery5years(49CFR180.207).

2. Therequalificationmarkingsmustconformtotherequirementsof 49 CFR 180.213. ...........................................................................

3. UN/ISOpressurereceptaclesmayberequalifiedbyahydraulicpressure test or by ultrasonic examination (UE). The hydraulic pressure test may be either the volumetric expansion test or the proof pressure test. (49 CFR 180.207) ...........................

4. 49CFR180.207(c)Requalificationinterval.EachUN/ISO pressure receptacle that becomes due for periodic requalificationmustberequalifiedattheintervalspecifiedinthe following table:

Requalification Intervals of UN Pressure Receptacles

Interval (years) UN pressure receptacles/ hazardous materials 10…………….. Pressure receptacles for all hazardous materials except as noted below (also for issolved acetylene, see paragraph (d)(3) of this section):

5……………….. Composite pressure receptacles.

5……………….. Metal hydride storage systems.

5……………….. Pressure receptacles used for:

All division 2.3 materials. UN1013, Carbon dioxide. UN1043, Fertilizer ammoniating solution with free ammonia. UN1051, Hydrogen cyanide, stabilized containing less than 3% water.

UN1052,Hydrogenfluoride,anhydrous. UN1745,Brominepentafluoride. UN1746,Brominetrifluoride. UN2073, Ammonia solution. UN2495,Iodinepentafluoride. UN2983, Ethylene oxide and propylene oxide mixture, not more than 30% ethylene oxide.

53 [email protected] / 866-958-3473UN-ISO AND DOT/TC MARKINGS


UN-ISO AND DOT/TC FRIENDLY MARKINGS ON ALL SAFE CYLINDERS (Note both ISO and TC Markings are Present for Ease of Filling in USA and Canada):

Test Pressure (PSI)

Country of Manufacture

IdentificationofCylinderThread

Minimum Wall Thickness

UN Marking

Empty Weight (no value)

Standard

Water Capacity Inspection Stamp

Working Pressure

Initial Test Date (yr/mth)

Test Pressure (bar)

Hydrogen Compatible

Stamp for NDT

Manufacture Serial Number

Manufacture’sIdentification

Working Pressure (PSI)

Country of Approval Stamp Mark

Approval Number

TOP ROW—Contains manufacturing marks such as the cylinder thread type, the country of manufacture, and the serial number assigned by the manufacturer.

MIDDLE ROW—Contains operational marks such as the minimum wall thickness, the tare or empty weight, water capacity in liters, working pressure (PW) in bar, and test pressure (PH) in bar.

BOTTOM ROW—Contains certification marks such as the UN packaging symbol, the ISO standard, the country or countries of approval, the manufacturer’s approv-al mark, the approved third party independent inspection agency identification stamp, and the initial inspection year and month separated by a slash.

Other markings are permitted in low-stress areas, provided they are not on the side wall. Other marks must not conflict with the required markings.

All ISO/UN cylinders provided by All Safe comply with applicable requirements in 173.301b and 173.304b for transportation and filling.

*Note: Refillable seamless steel cylinders conforming to ISO 9809-1, 9809-2, or 9809-3 are authorized with UN USA approval within the U.S. All Safe UN/ISO cylinders are ISO9809-1 UN USA approved.

54 [email protected] / 866-958-3473MEDICAL

MEDICAL

Medical Gas Cylinders

Exceptionally safe and strong, our cylinders are in daily use by EMS teams, home oxygen providers, and medical institutions. Available in all medical standard sizes, including E, D, M6, M9, M24, and M122.

• Tough and Durable: All Safe cylinders are fracture-tough, resistant to tears and cracks under extended high-pressure loads, and inherently corrosion-resistant, for long service life in the most demanding environments

• Lightweight: We feature easy-to-carry carbon composite and aluminum cylinders—up to 40% lighter than steel

• Tested Safe: All cylinders undergo and pass rigorous strength and integrity tests, and meet or exceed all industry quality and safety requirements

• Transport Ready: All cylinders strictly conform to Department of Transportation(DOT)specifications.MostalsoconformtoandareapprovedunderTransportCanada(TC)specifications

• Labels Included: Easy-to-read consumer warning decals with every cylinder, for the protection of you and your customers

• Shipsunfilled

• Free shipping available on pallet orders of certain cylinders

• Contact us for up-to-the-minute cylinder availability

Medical Valves and Regulators

All Safe Global carries post valves, mix service valves, regulators, and integrated valve regulators for most medical and EMS gas applications. Manufactured to exacting standards of performance and reliability, our valves and regulators are available for steel, aluminum and composite cylinders, and in all common medical gas service configurations.

Medical Post Valves

• Durable:Extrudedbrasschrome-finishedvalvebodiesprovidelong cycle life and excellent corrosion resistance

• Protected: Chamber design protects threads and valve stem from accidental damage

• Secure: Engineered for complete, low-torque sealing and leak resistance,withprecisethreadmachining,Teflonpacking,dualO-Rings, and a leak-resistant bonnet seal

• Safe: Valves feature an integrated pressure relief device for proper assembly, lasting safety, and tamper-resistance

• ReadyforusewithallCGA-specifiedyokestylevalves

• Available in wrench- or toggle-type connections

• Fully cleaned for oxygen service

• Contact us for up-to-the-minute valve availability

Please note: for handwheel-type and other medical gas valves, please see the Industrial Valves section of this catalog. For O-Rings and replacement parts, please see the Industrial O-Ring, Safeties, and Valve Replacement Parts section of this catalog.

Health care organizations worldwide rely on the proven performance of our medical compressed gas

equipment. We feature a full range of high-quality cylinders, valves, regulators, and carts for all your

care requirements.

55 [email protected] / 866-958-3473MEDICAL

MEDICALINTRODUCTION

Medical Regulators

• Durable: Precision-machined from aluminum for long life, light weight, and compact form

• Easy to Use: Large, user-friendly markings for simple and accurateflowadjustment

• Secure: Engineered for leak resistance, with precise thread machining

• Versatile: For maximum usability in a wide range of applications, each regulator comes with yoke- and nut-style inlet connections andareavailableinmultipleflowranges

• Fully cleaned for oxygen service

• Contact us for up-to-the-minute regulator availability

Medical Cylinder Carts

Our Rack N’ Roll Modular Cylinder System provides simple and secure storage for aluminum medical gas cylinders. The system features completely molded construction, no-rattle trays, and aluminum handles, and is available in stationary or smooth-rolling locking wheel designs.

56 [email protected] / 866-958-3473MEDICAL OXYGEN CYLINDERS

MEDICALCYLINDERS

MEDICAL OXYGEN CYLINDERS

Type Description Part NumberE Medical E – Aluminum Cylinder – Standard Post Valve MEALALUM

D Medical D – Aluminum Cylinder – Standard Post Valve MDALUM

M4 Medical M4 – Aluminum Cylinder – Standard Post Valve M4ALUM

M6 Medical M6 – Aluminum Cylinder – Standard Post Valve M6ALVLV

M7 Medical M7 – Aluminum Cylinder – Standard Post Valve M7ALUM

M9 Medical M9 “C" – Aluminum Cylinder – Standard Post Valve M9ALUM

M22 Medical M22 – “Jumbo D" Aluminum Cylinder – Standard Post Valve M22ALUM

M60 Medical M60 – Aluminum Cylinder – CGA540 Valve M60ALUM

M90 Medical M90 – Aluminum Cylinder CGA540 Valve M90ALUM

M122 Medical M122 (MM) – Aluminum Cylinder – CGA540 Valve – Plus Cap & Collar MMALUM

M150 Medical M150 – Aluminum Cylinder – CGA540 Valve – Plus Carry Handle M150ALUM

M200 Medical M200 - Aluminum Cylinder - CGA540 Valve - Plus Carry Handle M200ALUM

MEALALUM MDALUM M6ALVLV M60ALUM

Ask about free freight of pallet quantities on certain medical cylinders.


see page 4


RNR-W

MEDICAL OXYGEN CYLINDERS & CARTS

MEDICALCYLINDERS

MEDICAL OXYGEN CYLINDERS

Type Description Part NumberM09B M09B – Carbon Composite Cylinder – Standard Post Valve M09B-COMP

M15A M15A – Carbon Composite Cylinder – Standard Post Valve M15A-COMP



MB08 MB08 – Standard Post Valve – 3000 PSI High Capacity Aluminum Cylinder MB08-HC

MC13 MC13 – Standard Post Valve – 3000 PSI High Capacity Aluminum Cylinder MC13-HC

MD22 MD22 – Standard Post Valve – 3000 PSI High Capacity Aluminum Cylinder MD22-HC

MEDICAL CYLINDER CARTS

Type Description Part NumberCylinder Cart Rack N’ Roll Complete – with Wheels RNR-W

Cylinder Cart Rack N’ Roll Complete – Stationary RNR-S

Handles Rack N’ Roll Handles RNRHANDLE

Tray Rack N’ Roll Lower Tray RNRLOWERTRAY

Tray Rack N’ Roll Upper Tray RNRUPPERTRAY

Ask about free freight on pallet quantities ofcertain medical cylinders.

58 [email protected] / 866-958-3473MEDICAL POST VALVES

MEDICALVALVES

MEDICAL POST VALVES

Type Description Part NumberOxygen CGA870 Post Valve – 1/2" NGT Yellow – 3360 PSI 87044-XX

Oxygen CGA870 Post Valve – 1/2" NGT Yellow – 3360 PSI Toggle 87044-XX-T

Oxygen CGA870 Post Valve – 3/4" UNF – Yellow 3360 PSI 87054-XX

Oxygen CGA870 Post Valve – 3/4" UNF – Yellow 3360 PSI MRI 87054-XX-MRI

Oxygen CGA870 Post Valve – 3/4" UNF – Yellow 3360 PSI Toggle 87054-XX-T

Oxygen CGA870 Post Valve – 3/4" UNF – Yellow 3360 PSI Gauge Port 87054-XX-G

CO2 CGA940 Post Valve – 1/2" NGT 3360 PSI 94041-XX

CO2 CGA940 Post Valve – .750" UNF 3360 PSI 94051-XX

87054-XX 87054-XX-T 87054-XX-MRI 87054-XX


see page 4

For the oxygen service valves CGA540 (handwheel type), other medical valves, handwheels, and handwheel types see the Industrial Valves section for the specific gas type.

For O-Rings and parts see our Industrial O-Rings, Safeties & Valve Replacement Parts pages 45–49.

59 [email protected] / 866-958-3473MEDICAL POST & MEDICAL MIX VALVES

MEDICALVALVES

MEDICAL POST VALVES

Type Description Part NumberInert/Nitrogen CGA930 Post Valve – 1/2" NGT 3360 PSI 93044-XX

Inert/Nitrogen CGA960 Post Valve – 1/2" NGT 3360 PSI 96044-XX

Inert/Nitrogen CGA960 Post Valve – .750" UNF 3360 PSI 96054-XX

Nitrous Oxide CGA910 Post Valve – 1/2" NGT 3360 PSI 91041-XX

Nitrous Oxide CGA910 Post Valve – .750" UNF 3360 PSI 91051-XX

Breathing Air CGA950 Post Valve – 1/2" NGT 3360 PSI 95044-XX

Breathing Air CGA950 Post Valve – .750" UNF 3360 PSI 95054-XX

Medical Gas Mixtures CGA965 Post Valve – .750" UNF 3360 PSI 96554-XX

Medical Gas Mixtures CGA973 Post Valve – 1/2" NGT 3360 PSI 97344-XX

Medical Gas Mixtures CGA973 Post Valve – .750" UNF 3360 PSI 97354-XX

MEDICAL MIX SERVICE

Type Description Part NumberCGA500 CGA500 Valve – 3/4" NGT 3360 PSI 50061-XX

CGA500 CGA500 Valve – .750" UNF 3360 PSI 50051-XX.750

For the Oxygen Service Valve CGA540 handwheel type see page 39.

60 [email protected] / 866-958-3473MEDICAL OXYGEN REGULATORS

MEDICALREGULATORS

MEDICAL OXYGEN REGULATORS

Type Description Part NumberAluminum Regulator 0-4 LPM CGA540 Mini Regulator – Brass Insert – Barb Outlet – Fraction RM-04-540-BARB-FRAC

Aluminum Regulator 0-4 LPM CGA870 Mini Regulator – Brass Insert – Barb Outlet – Decimal RM-04-870-BARB-DEC

Aluminum Regulator 0-4 LPM CGA870 Mini Regulator – Brass Insert – Barb Outlet – Fractions RM-04-870-BARB-FRAC

Aluminum Regulator 0-4 LPM CGA540 Regulator – Brass Insert – DISS Fitting RM-04-540-D

Aluminum Regulator 0-4 LPM CGA540 Regulator – Brass Insert – Decimal – DISS Fitting RS-04-540-DISS-DEC

Aluminum Regulator 0-4 LPM CGA540 Regulator – Brass Insert – Fraction – DISS Fitting RS-04-540-DISS-FRAC

Aluminum Regulator 0-4 LPM CGA870 Regulator – Brass Insert – Barb Outlet – Decimal RS-04-870-BARB-DEC

Aluminum Regulator 0-8 LPM CGA870 Mini Regulator – Brass Insert – Barb Outlet RM-08-870

Aluminum Regulator 0-15 LPM CGA870 Mini Regulator – Brass Insert – Barb Outlet RM-15-870-DEC-BARB

Aluminum Regulator 0-15 LPM CGA540 Regulator - Brass Insert - Barb Outlet - DISS Fitting REGMED54015B

Aluminum Regulator 0-15 LPM CGA540 Regulator - Brass Insert - MFL Outlet REGMED54015F

Aluminum Regulator 0-25 LPM CGA870 Mini Regulator – Brass Insert – Barb Outlet RM-25-870-BARB-DEC

RM-04-540-BARB-FRAC RM-15-870-BARB-DEC REGMED54015F REGMED54015B

61 [email protected] / 866-958-3473MEDICAL OXYGEN REGULATORS

MEDICALREGULATORS

MEDICAL OXYGEN REGULATORS

Type Description Part NumberAluminum Regulator 0-4 LPM CGA870 Regulator – Brass Insert – Fractions RS-04-870-FRAC

Aluminum Regulator 0-8 LPM CGA540 Regulator – Brass Insert – DISS Fitting – [BLUE PRVT LBL] RS-08-540-DISS-DEC-BLPL

Aluminum Regulator 0-8 LPM CGA540 Regulator – Brass Insert – DISS Fitting – [GREEN PRVT LBL] RS-08-540-DISS-DEC-GRPL

Aluminum Regulator 0-8 LPM CGA540 Regulator – Brass Insert – DISS Fitting RS-08-540-DISS-DEC

Aluminum Regulator 0-8 LPM CGA870 Regulator – Brass Insert – Barb Outlet RS-08-870-BARB-DEC

Aluminum Regulator 0-15 LPM CGA540 Regulator – Brass Insert – DISS Fitting RS-15-540-DISS-DEC

Aluminum Regulator 0-25 LPM CGA540 Regulator – Brass Insert – DISS Fitting RS-25-540-DEC-DISS

Integrated Valve Regulator 0-15 LPM CGA540 Fill Connection – 3/4” 16UNF - No DISS OXYG-V-15-XX

Integrated Valve Regulator 0-15 LPM CGA540 - No DISS RM200L-AL

Integrated Valve Regulator 0-25 LPM CGA540 - DISS 1240 - High Flow RH200L-AL

OXYG-V-15-XX

62 [email protected] / 866-958-3473BEVERAGE

Whether you operate a taproom, craft brewery, retail location or online store, All Safe Global’s

complete line of brewing, kegging, and dispensing equipment gives you everything the discriminating

beverage producer needs.

Kegs

Quality 304 stainless steel ball lock, pin lock, and Sankey kegs for home and commercial brewers alike.

• NSF-approved beverage safe

• Available in sizes for all applications, from 2.5 to 5 gallons and 1/6 to 1/4 barrels.

• Durable rubber or steel bottoms (keg-dependent)

• Steel or rubber handles (keg-dependent)

Cylinders

The essential companion to our kegs or the ideal upgrade to your existing beverage system. All Safe Global is proud to offer high-quality, DOT-approved CO2 cylinders in lightweight aluminum or economical steel, with capacities from 2.5 lbs. to 100 lbs.

• New CO2-standard CGA 320 valve on every cylinder

• Tanks meet or exceed all regulatory standards worldwide

• Many larger cylinders are equipped with convenient carry handles

• Choice of cap available

• Shipsunfilled;siphontubenotincluded

• Contact us for up-to-the-minute cylinder availability

Beverage Kits and Parts

Get started with the beverage of your choice with our convenient and affordable keg kits, or build, upgrade, or enhance a system with our complete selection of parts.

Keg Components

Relief valves, posts, O-Rings, and more – the essentials for the care, repair,

BEVERAGE

and maintenance of your keg. High-quality disconnects, barbs, clamps, and tubes for easy liquid and gas handling.

Gas Parts

Manifolds, labels, and adapters for cylinder connections.

Dispensing Parts

Faucetsandcomponentstodeliveryourfinishedproduct.

Sankey Parts

Couplers, conversion parts, and components for Sankey keg connections.

Keg Pumps

Quality hand pumps for quick and easy beverage dispensing.

Keg Kits & Conversion Kits

Availablewithorwithoutgascylinders,eachNSF-certifiedfoodsafekitcontains a keg, regulator, disconnects, and all necessary lines and clamps – everything needed to start producing today.

Kettles

Professional-quality, 304 stainless steel brew kettles in sizes from 8 to 20 gallons.

Conversion Kits

Make any refrigerator a beverage machine with our conversion kits. Available with or without CO2 cylinders.

Oxygenator Kit

Precise oxygen injection for the serious home brewer. Tank, stainless wand, regulator, and lines included.

63 [email protected] / 866-958-3473BALL LOCK & PIN LOCK KEGS

BALL LOCK KEGS

Type Description Part NumberAMCYL Ball Lock – 2.5 Gallon Keg – Single Handle CKN25INX

AMCYL Ball Lock – 2.5 Gallon Keg – Dual Rubber Handle CKN25DRHINX

AMCYL Ball Lock – 3 Gallon Keg – Single Handle CKN3INX

AMCYL Ball Lock – 3 Gallon Keg – Dual Rubber Handle CKN3DRHINX

AMCYL Ball Lock – 5 Gallon Keg – Single Handle CKN5INX

AMCYL Ball Lock – 5 Gallon Keg – Dual Rubber Handle CKN5DRHINX

BEVERAGEKEGS

CKN25INX CKN25DRHINX CKN5INXCKN3INX CKN5DRHINX

PIN LOCK KEGS

Type Description Part NumberAMCYL New Pin Lock – 5 Gallon Keg – Dual Rubber Handle CK2N-5DRHINX

AMCYL New Pin Lock – 5 Gallon Keg – Single Handle CK2N-5INX

64 [email protected] / 866-958-3473BALL LOCK & PIN LOCK KEGS

BEVERAGEKEGS

BALL LOCK KEGS

Type Description Part NumberAEB Ball Lock – 2.5 Gallon Keg – Single Handle CKN25

AEB Ball Lock – 2.5 Gallon Keg – Dual Rubber Handle CKN25R

AEB Ball Lock – 3 Gallon Keg – Single Handle CKN3

AEB Ball Lock – 5 Gallon Keg – Single Handle CKN5

AEB Ball Lock – 5 Gallon Keg – Dual Rubber Handle CKN5R

AEB Cleaning Tank – 18 Liter – 4 Beer Neck – Without Spear Tube CT1

CKN25 CKN25R CKN5 CT1

65 [email protected] / 866-958-3473RECONDITIONED KEGS

BEVERAGERECONDITIONED KEGS

BALL LOCK & PIN LOCK KEGS

Type Description Part NumberVaries Reconditioned Ball Lock – 5 Gallon Keg – Processed – Dual Handle CK1

Varies Reconditioned Pin Lock – 5 Gallon Keg – Processed – Dual Handle CK2

CK2CK1


BEVERAGEKEGS

SANKEY KEGS & SPEAR TUBES

SANKEY KEGS

Type Description Part NumberAMCYL 1/6 Barrel Keg – Rubber Top & Bottom – Spear Tube D Type KEG16STD-DRH

AMCYL 1/6 Barrel All Steel Keg – Spear Tube D Type KEG16STD

AMCYL 1/4 Barrel Keg – Spear Tube D Type KEG14STD

AMCYL 1/2 Barrel Keg – Spear Tube D Type KEG12STD

KEG16STD KEG14STD KEG12STD ST-D

SANKEY KEGS SPEAR TUBE

Type Description Part NumberMultiple Spear Tube A Type ST-A

Multiple Spear Tube S Type ST-B

Multiple Spear Tube G Type ST-G

Multiple Spear Tube D Type – “American Sankey” ST-D

Multiple Spear Tube U Type ST-U


SANKEY KEG PUMPS & COUPLERS

Type Description Part NumberCoupler Sankey D Coupler – Blue Handle SANKEYD1

Converter Converter - Sankey Liquid Connection to Ball Lock Post BLP-SANKEY-LIQ

Converter Converter - Sankey Gas Connection to Ball Lock Post BLP-SANKEY-GAS

Coupler 1/2” NPT Coupler, Stainless Steel A-SSCOUPLER1

Pony Pump Pony Pump – White Body – Hose and Faucet PUMP1

Bronco Pump Bronco Pump – Black Body – Lever Tap Handle – Hose and Faucet PUMP2

Hand Pump Stainless Steel 4" Hand Pump – Lever Tap Handle – Hose and Faucet PUMP3

Hand Pump 4" Hand Pump – No Fittings with 3/4" 18 Thread HND-PUMP-4-NF

Hand Pump 8" Hand Pump – No Fittings with 3/4" 18 Thread HND-PUMP-8-NF

BEVERAGEKEG PUMPS

PUMP2 PUMP1 HND-PUMP-4-NF SANKEYD1

KEG PUMPS & COUPLERS

68 [email protected] / 866-958-3473CO2 CYLINDERS

CO2 CYLINDERS

Size Gas Description Part Number2.5 lb. CO2 2.5 lb. Aluminum – CGA320 Valve – 1800 PSI 25LBALVLV



10 lb. CO2 10 lb. Aluminum – CGA 320 Valve – 1800 PSI – Carry Handle 10LBALVLV-H




50 lb. CO2 50 lb. Aluminum – CGA320 Valve – 1800 PSI – Carry Handle or Cap 50LBALVLV

BEVERAGECYLINDERS

25LBALVLV 5LBALVLV 10LBALVLV 20LBALVLV 35LBALVLV 50LBALVLV

69 [email protected] / 866-958-3473CO2 & NITROGEN / BEER MIX CYLINDERS

BEVERAGECYLINDERS

NITROGEN / BEER MIX CYLINDERS

Size Gas Description Part Number20 cu ft Nitrogen / Beer Mix 20 cu ft Aluminum Cylinder – 2015 PSI – No Paint 20CUFTALVLV

22 cu ft Nitrogen / Beer Mix 22 cu ft Aluminum – CGA580 Valve – 1800 PSI 22CUFTALVLV



22CUFTALVLV 60CUFTALVLV20CUFTALVLV


CO2REG-DUAL-MFL CO2REG-SINGLE-MFL-HP N2REG-DUAL-5/16BARB

BEVERAGE REGULATORS

BEVERAGEREGULATORS

PRIMARY REGULATORS

Type Description Part Number

CO2 Primary Regulator High Performance Dual Gauge – No Shutoff – 0-50 PSI Range – CO2REG-DUAL-X


CO2 Primary Regulator High Performance – MFL Shutoff Installed – 0-50 PSI Range – CO2REG-DUAL-MFL


CO2 Primary Regulator High Performance – 1/4 Shutoff Installed – 0-50 PSI Range – CO2REG-DUAL-1/4BARB


CO2 Primary Regulator High Perforformance – MFL Shutoff with 5/16" barb swivel – CO2REG-DUAL-M516

0-50 PSI range – Dual 60 lb. & 2000 lb. Gauges

CO2 Primary Regulator High Performance – Single 60 lb. Gauge – CO2REG-SINGLE-5/16BARB 5/16" Barb Outlet with Shutoff – 0-50 PSI Range

CO2 Primary Regulator High Performance – Single 60 lb. Gauge – CO2REG-SINGLE-MFL-HP

MFL Outlet with Shutoff – 0-50 PSI Range


0-50 PSI – 60 lb. & 3000 lb. Gauge

Nitrogen Primary Regulator Nitrogen Primary Reg – Dual Gauge – 1/4" Shutoff Installed – N2REG-DUAL-1/4BARB

0-50 PSI – 60 lb. & 3000 lb. Gauge

Oxygen Regulator Portable Oxygen Regulator with 1/4” Barb Output HB-OXY-REG2


POPPET-AEPBLLN-A LCF POPPET-CORN

KEG PARTS

KEG PARTS

Type Description Part NumberLid Lid with Pressure Relief & Lid O-Ring BLLN-A

Lid Carbonation Lid with .5 mm Diffusion Stone A-CARBLID-0.5DS

Lid Feet Lid Closure Feet Cover LCF

O-Ring Universal Poppet O-Ring PP-OR-U

O-Ring Lid O-Ring BEVORING-LOR

O-Ring Dip Tube O-Ring BEVORING-DTOR

O-Ring Pin Lock Post O-Ring BEVORING-PLPOST

O-Ring Ball Lock-Post O-Ring BEVORING-BLPOST

O-Ring Kit Ball Lock 5 Piece O-Ring Kit ORK-BL1

O-Ring Kit Pin Lock 5 Piece O-Ring Kit ORK-PL1

Poppet Universal Poppet with Universal Spring POPPET-AEP

Poppet Cornelius Poppet POPPET-CORN

Relief Ring Pull Ring for Relief Valve PULLRING

Relief Valve Pressure Relief Valve – Ball Lock Lids KPRVO

Relief Valve Assembly Keg Pressure Relief Valve Assembly – Replaces ‘Dome’-Style Reliefs KPRVA

Spring Universal Poppet Spring AE-SO

BEVERAGEKEG COMPONENTS & PARTS

72 [email protected] / 866-958-3473KEG PARTS & ACCESSORIES


KEG PARTS & ACCESSORIES

Type Description Part NumberPost Ball Lock – Liquid Post – With O-Ring – No Poppet BLPWPLIQ

Post Ball Lock – Gas Post – With O-Ring – No Poppet BLPWPGAS

Post Ball Lock Posts for Pin Lock Conversion Gas & Liquid BLPCONV

Post Ball Lock Post for Pin Lock Conversion - Gas BLPCONV-GAS

Post Ball Lock Post for Pin Lock Conversion - Liquid BLPCONV-LIQ

O-Ring Pin Lock Post O-Ring BEVORING-PLPOST

O-Ring Ball Lock-Post O-Ring BEVORING-BLPOST

Neoprene Jacket Neoprene Keg Parka/Jacket for 5 Gallon (19L) Kegs KPARKA1

Neoprene Jacket Neoprene Keg Parka/Jacket for 2.5 Gallon (9L) Kegs KPARKA2

BLPWPGAS KPRVOKPARKA1



Type Description Part NumberDisconnect Ball Lock Quick Disconnect – Threaded – Liquid Connection – Short BLDLIQT99

Disconnect Ball Lock Quick Disconnect – Threaded – Gas Connection – Short BLDGAST77

Disconnect Ball Lock Quick Disconnect – Barbed – Gas Connection – Short BLDGASB277

Disconnect Ball Lock Quick Disconnect – Barbed – Liquid Connection – Short BLDLIQB299

Disconnect Pin Lock Quick Disconnect – Barbed – Gas Connection – Short PLDGASB27-S

Disconnect Pin Lock Quick Disconnect – Barbed – Liquid Connection – Short PLDLIQB29-S

Disconnect Pin Lock Quick Disconnect – Threaded – Liquid Connection – Long PLDLIQT299

Disconnect Pin Lock Quick Disconnect – Threaded – Gas Connection – Long PLDGAST277

Disconnect Stainless Steel Ball Lock Disconnect – Liquid (MFL) BLDLIQMFL-SS

Disconnect Stainless Steel Ball Lock Disconnect – Gas (MFL) BLDGASMFL-SS


BLDLIQB299BLDGAST77 PLDLIQB29 BLDLIQMFL-SSPLDGAST277




Type Description Part NumberBarb 1/4" Barb with Swivel 1/4" Nut Assembly BRB-SWVL-1/4A

Barb 5/16" Barb with Swivel 1/4" Nut Assembly BRB-SWVL-5/16A

Barbed Fitting Stainless Steel Male Barbed Fitting 1/2” NPT A-SS-FITTING-1

Barbed Fitting Stainless Steel Female Barbed Fitting 1/2” NPT A-SS-FITTING-2

Barbed Swivel 1/4” Barbed Swivel Hose Stem BRB-SWVL-1/4-BARB

Barbed Swivel Threaded Nut for 1/4” Barbed Swivel Hose Stem BRB-SWVL-1/4-NUT

Barbed Swivel 5/16” Barbed Swivel Hose Stem BRB-SWVL-5/16-BARB

Barbed Swivel Threaded Nut for 5/16” Barbed Swivel Hose Stem BRB-SWVL-5/16-NUT

Beer Nut Beer Nut – 1 inch HEX BNUT1

Beer Stem Beer Stem – 1/4 inch MFL BSTEM025MF

Beer Washer Beer Washer – Sankey Conversion 1/2” I.D. x 13/16” O.D. x 1/8” Buna Duro 80 BWASH1

Clamp Hose clamp – For 5/16" I.D. Tubing 7/32" to 5/8" worm gear HOSECLAMP

Clamp Hose clamp – For 3/16" I.D. Tubing 7/32" to 5/8" worm gear HC316

Hex Nut Stainless Steel 1” Hex Nut – Beer Thread (29/32-14) BNUT2

Hose Clamp 12.5 mm Stepless Hose Clamp for 7/16” OD Gas Tubing HOSECLAMP-ST1

Hose Clamp 10 mm Stepless Hose Clamp for 5/16” OD Gas Tubing HOSECLAMP-ST2

Keg Lubricant Keg Lubricant – Sanitary Gel Grease – 4 oz. Tube – NSF Approved KEGLUBE

Pigtail Assembly Ball Lock Liquid Pigtail Assembly – Ball Lock Quick Disconnect – Hose – Clamps LIQ-PIGTAIL-BL

Pigtail Assembly Ball Lock Gas Pigtail Assembly – Ball Lock Quick Disconnect – Hose – Clamps GAS-PIGTAIL-BL

Shank Shank for Refrigerator Conversion – 4 1/8” x 1/4” Bore – 1/4” Barb Inlet – Black Plastic Flange SHANK1

Tubing Liquid Tubing – 3/16” I.D. (5/16 O.D. 1/16 wall) 45 PSI – NSF Approved T316IDLIQ

Tubing Gas Tubing – 5/16” I.D. (7/16 O.D. 1/16 wall) 30 PSI – NSF Approved T516IDGAS

Washer Nylon Washer for Flare Fitting – Bevel 1/4” Washer NWMFL1


TOWER1-SS

DISPENSING & GAS PARTS


Type Description Part NumberFaucet Picnic Faucet – Black Plastic 1/4" Barb PICNICFAUCET

Faucet Brass Perlick Style Faucet – Short Shank (w/Nut, Tail, Collar) FAUCET2

Faucet Brass Perlick Style Faucet – Long Shank 100mm (w/Nut, Tail, Collar) FAUCET3

Faucet Beer Faucet with Stainless Steel Lever – Black Knob for Faucet FAUCET-SS1

Faucet Adapter Ball Lock Disconnect to Faucet Adapter A-FADAPT1

Faucet Handle Black Knob for Stainless Faucet – Compatible with SS1 FAUCETKNOB

Faucet Tower Single Faucet Tower – 3" Diameter Stainless Steel Column – Stainless Steel Lever Faucet TOWER1-SS

Faucet Tower Double Faucet Tower – 3" Diameter Stainless Steel Column – Stainless Steel Lever Faucet TOWER2-DFSS

Faucet Tower Double Faucet Tower – 3" Diameter Stainless Steel Column – Brass Lever Faucet TOWER3-DFSS

Faucet Tower Single Faucet Tower Kit – Chrome-Plated Plastic Tower, Faucet, 13’ of 5 mm ID Liquid Line, A-SFONTKIT

Stainless Steel Clamps, & Faucet Tool

Faucet Tower Dual Faucet Tower Kit – Chrome-Plated Plastic Tower, Two Faucets, 26’ of 5 mm ID Liquid Line, A-DFONTKIT

Stainless Steel Clamps, & Faucet Tool

Label CO2 Label UN1013 CO2LABEL

Wrench Combination Beverage Wrench – Spanner, Hex Nut, & Screw Drive Wrench for Faucet Installation BEVWRENCH


PICNICFAUCET FAUCETKNOB FAUCET-SS1 TOWER2-DFSS


GPB-01 WANDOXYMAN4W516




Type Description Part NumberAdapter Brass Adapter – CGA320 Cylinder to CGA580 Regulator A1320580

Adapter Brass Adapter – CGA580 Cylinder to CGA320 Regulator A2580320

Adapter Sodastream Adapter Hose – 36”

CO2 Charger Kit Keg CO2 Charger Kit CO2-CHRG-KIT1

Charger Cartridge 16 Gram CO2 Charger Cartridge/Bulb (threaded) CO2-16GRAM

Charger Cartridge 74 Gram CO2 Charger Cartridge/Bulb (threaded) CO2-74GRAM

Charger PremiumRegulatedCO2Chargerw/BallLockfitting&Gauge CO2-CHRG01

Charger Adapter CO2 Cartridge Adapater for Mini Regulator - 74 g Cartridge to 16 g Charger A-REG-ADAPT-1

Manifold 2-Way Manifold – 5/16" Barb Shutoff Outlet – 3/8" Barb Inlet MAN2W516

Manifold 3-Way Manifold – 5/16" Barb Shutoff Outlet – 3/8" Barb Inlet MAN3W516

Manifold 4-Way Manifold – 5/16” Barb Shutoff Outlet – 3/8” Barb Inlet MAN4W516




Gauge Boot Gauge Protection Boot – Fits Gauges 2 1/4" Diameter x 1 1/8" – Flexible PVC GPB-01

Oxygen Wand 22" Stainless Steel Oxygen Dispensing Wand with Diffusing Stone WANDOXY

MAN2W516

77 TUBING


TUBING

Type Description Part NumberTubing Liquid Tubing – 3/16” I.D. (5/16” O.D. 1/16” Wall) 45 PSI – NSF Approved T316IDLIQ

Tubing Liquid Tubing – 1/4” I.D. (7/16” O.D. 1/16” Wall) 45 PSI – NSF Approved T14IDLIQ

Tubing Gas Tubing – 5/16” I.D. (7/16” O.D. 1/16” Wall) 30 PSI – NSF Approved T516IDGAS

Tubing Liquid Tubing – 3/8” I.D. (1/2” O.D, 1/16” Wall) For Auto-Siphon Applications – NSF Approved T38IDLIQ-Clear

Tubing Liquid Tubing – 1/2” I.D. (5/8” O.D, 1/16” Wall) For Auto-Siphon Applications – NSF Approved T12IDLIQ-Clear

Tubing High-Temperature Liquid Tubing – 3/8” I.D. (1/2” O.D., 1/8” Wall) Black, Rated For Use Up To 200º C, T38HTLIQ-Black

175 PSI Maximum Working Pressure at 73º C– NSF Approved

Tubing High-Temperature Liquid Tubing – 3/8” I.D. (1/2” O.D., 1/8” Wall) White, Rated For Use Up To 200º C, T38HTLIQ-White


Tubing High-Temperature Liquid Tubing – 1/2” I.D. (5/8” O.D., 1/8” Wall) Black, Rated For Use Up To 200º C, T12HTLIQ-Black


Tubing High-Temperature Liquid Tubing – 1/2” I.D. (5/8” O.D.) White, Rated For Use Up To 200º C, T12HTLIQ-White


[email protected] / 866-958-3473

T14IDLIQ T12IDLIQ-CLR T516IDGAS

78 [email protected] / 866-958-3473BREWING EQUIPMENT

BREWING EQUIPMENT

Type Description Part NumberWasher Keg/Carboy/Parts Washer KEGWASH1

Beer Gun Stainless/ABS Composite Beer Gun A-PG1

Thermometer 132mmBi−Metal3inchDialThermometer−LongStem A-THERM1

Thermometer 40mmBi−Metal3inchDialThermometer−ShortStem A-THERM2

Bulkhead Poly Bulkhead for 6.5mm Diameter Temperature Probe A-TPROBE1

Heat Exchanger 20 Plate Wort Chiller / Heat Exchanger A-HEATEX1

Fast Ferment Fast Ferment Kit, 7.9 Gallons, with Screw Top, Wall Mount, Grommet, Air Lock, A-FFKIT1

Collection Ball, Valve, Wall Mount, Tubing, & Fittings

Fast Ferment Fast Ferment Spare Collection Ball A-CBALL1

Fast Ferment Fast Ferment Carry Strap A-CSTRAP-FF1

Fast Ferment Fast Ferment Thermometer A-THERM-FF1

Fast Ferment Fast Ferment Metal Stand A-STAND-FF1

Hop Spyder Stainless Steel Hop Spyder for Brew Kettles and Fermenters A-SPYDER1

BEVERAGEBREWING EQUIPMENT

KEGWASH1 A-THERM1 A-TPROBE1 A-FFKIT1



BREWING EQUIPMENT

Type Description Part NumberAuto-Siphon Auto-Siphon & Racking Cane, 3/8” Connection A-ASIPHON1

Beer Filtering Beer Filtering System 10inch A-FILTERSYS1

Beer Filtering Washable Reinforced Filter 1 Micron Absolute A-FILTER1

Chiller 25’ Stainless Steel Immersion Wort Chiller A-CHILLER1

Cooling Coil Stainless Steel Cooling Coil 16m A-COIL1

Diffusion Stone 2 Micron Stainless Steel Diffusion Stone/Air Stone A-DIFFST-2.0MIC

Diffusion Stone 0.5 Micron Stainless Steel Diffusion Stone A-DIFFST-0.5MIC

Refractometer Portable Refractometer with ATC (with SG Scale) A-REFRACT1

Racking Cane Stainless Steel Racking Cane, 30” A-RCSS1

A-DIFFST-2.0MICA-COIL1 A-REFRACT1



BREWING EQUIPMENT

Type Description Part NumberAlcometer Alcometer 0 to 100% A-ALC-METER1

AirPump WortAerator−AirPumpKit A-PUMP-AIR1

Drive Pump High Temperature Magnetic Drive Pump (1/2 BSP) A-PUMP-MAG1

Drive Pump High Temperature Micro 12v Direct Drive Brown Pump A-PUMP-DRV1

Hydrometer Hydrometer A-HYDRO1

Hydrometer Thermohydrometer - Temperature-Compensated Hydrometer A-THYDRO-A

Fermenter 30LPailFermenter−WithAirlock,TempStick,Tap A-FERMENT1

Growler Growler – 2 Liter Capacity, Sprung Wire Lid GROWL-U1

Growler UltimateGrowler−2LiterCapacity,VacuumInsulated,ScrewLid,Handle GROWL-V2

Mash Paddle Stainless Steel Mash Paddle A-MASHP1

TestKit 100StripPHTestKit(PH0−14) A-PHKIT1

TestKit 100StripNarrow-RangePHTestKit(PH3.8−5.4) A-PHKIT2

Thermometer LCD Thermometer Strip for Pail Fermenter A-THERMS

A-MASHP1 A-PHKIT2 A-HYDRO1 GROWL-U1

81 BREWING KETTLES & POTS


[email protected] / 866-958-3473

BREWING KETTLES & POTS

Type Description Part NumberPot Set 60L/40L Nested Aluminium Pot Set A-POTSET1

Brew Kettle 8 Gallon Brew Kettle, Food-Grade 304 Stainless Steel KETTLE-A8

Brew Kettle 10 Gallon Brew Kettle, Food-Grade 304 Stainless Steel, Silicone Handles KETTLE-A10

Weldless 3-Piece Ball Valve, Weldless Port with Plug, Lid





Bazooka Screen 12inch/30cm Stainless Hop Bazooka Screen A-SCREEN1

A-POTSET1 KETTLE-A8 KETTLE-A15

82 [email protected] / 866-958-3473KEGGING KITS

BEVERAGEKEGGING KITS

KEGGING KITS

Type Description Part NumberKeg Kit 1 New 5 Gallon Ball-Lock Single Handle Keg – 5 lb. Aluminum CO2 Cylinder – Dual Gauge CO2 Regulator – Gas & Liquid Pigtails KIT1-CKN5-5A-REG516C

Keg Kit 2 Used 5 Gallon Ball-Lock Keg – 5 lb. Aluminum CO2 Cylinder – Dual Gauge CO2 Regulator – Gas & Liquid Pigtails KIT2-U5-5A-REG516C

Keg Kit 3 Used 5 Gallon Ball-Lock Keg – Dual Gauge CO2 Regulator – Gas & Liquid Pigtails – NO CO2 Cylinder KIT3-U5-REG516C-NO CO2

Keg Kit 4 Used 5 Gallon Ball-Lock Keg – 7 lb. Steel CO2 Cylinder – Dual Gauge CO2 Regulator – Gas & Liquid Pigtails KIT4-U5-7S-REG516C

Keg Kit 5 Used Pin-Lock Keg – 5 lb. Aluminum CO2 Cylinder – Dual Gauge CO2 Regulator – Gas & Liquid Pigtails KIT5-CK2-5A-REG516C

Keg Kit 6 New 3 Gallon Ball-Lock Keg – 5 lb. Aluminum CO2 Cylinder – Dual Gauge CO2 Regulator – Gas & Liquid Pigtails KIT6-CKN3-5A-REG516C

Keg Kit 7 Used 5 Gallon Pin-Lock Keg – Dual Gauge CO2 Regulator – Gas & Liquid Pigtails KIT7-CK2-REG516C-NO CO2

Keg Kit 8 N2 Pro – New 5 Gallon Ball-Lock Keg – 22 cu ft Aluminum Nitrogen Cylinder – Dual Gauge CO2 Regulator KIT8-N5-22CU-REG516N

KIT1-CKN5-5A-REG516C KIT2-U5-5A-REG516C

83 [email protected] / 866-958-3473KEGGING KITS

BEVERAGEKEGGING KITS

KEGGING KITS

Type Description Part NumberOxygenator Kit Oxygenator Kit – Steel Cylinder – Oxygen Regulator and Wand KIT-OXYBEV1

Sankey Conversion Kit Sankey Only – Refrigerator Conversion Kit – No CO2 KIT-C1

Sankey Conversion Kit Sankey Only – Refrigerator Conversion Kit – 5lb CO2 KIT-C2-5A

Multi Conversion Kit Universal Refrigerator Conversion Kit – Ball Lock and Sankey Connections – 5 lb CO2 KIT-CONV-U2-5A

Multi Conversion Kit Parts Conversion Kit – Converts Sankey to Ball Lock Connections PART-CONVKIT1-BL

Multi Conversion Kit Universal Refrigerator Conversion Kit – Ball Lock and Sankey Connections – No CO2 Tank KIT-CONV-U1

Shank Tailpiece Shank Tailpiece for 1/4” ID Hose, Chrome Plated SHANK-TAIL14C

Shank Tailpiece Shank Tailpiece for 1/4” ID Hose, Stainless Steel SHANK-TAIL14SS

Shank Tailpiece Shank Tailpiece for 3/16” ID Hose, Chrome Plated SHANK-TAIL316C

Shank Tailpiece Shank Tailpiece for 3/16” ID Hose, Stainless Steel SHANK-TAIL316SS

Shank Tailpiece Shank Tailpiece for 5/16” ID Hose, Stainless Steel SHANK-TAIL516C

Shank Tailpiece Shank Tailpiece for 5/16” ID Hose, Chrome Plated SHANK-TAIL516SS

KIT-OXYBEV1 KIT-C2-5A PART-CONVKIT1-BL

84 [email protected] / 866-958-3473SCBA & LIFE SAFETY

SCBA & LIFE SAFETY

SCBA Cylinders and Valves

• Light and Strong: All SCBA cylinders feature high-performance composite construction

• ExtendedCertification:AllSCBAcylindersfeatureaminimum15yearservicelifebeforerecertification;severalareavailablewithanextraordinary 30 year interval.

• FittoYourNeeds:Cylindersareavailableinallstandardconfigurations–includingScott,MSA,andISI/Survivairtypes–in30and45minutecapacities,andin2216and4500PSIconfigurations.Valvesareavailableintypes,pressureratings,handleplacements,andoutletstylestofityoursystemexactly.

• Valves and cylinders sold separately

• Cylindersshipunfilled

• Contact us for up-to-the-minute cylinder and valve availability

Fire Extinguishers

Forfiresafetyinanysituation,weprovideacompleterangeofextinguishertypesandcapacities.ABC,CO2,Halotron,andClassKextinguishersare available, in sizes from 2.5 to 20 lbs. A variety of brackets and cabinets for secure storage are also available; please contact your All Safe Global representative for details.

When performance and reliability are life-saving essentials, All Safe Global has you covered. Our

completelineofSCBAcylindersandvalvesandourfullrangeoffireextinguishersprovideunmatched

safety when you need it most, with exceptional quality at an affordable price.

85 [email protected] / 866-958-3473SCBA CYLINDERS

SCBA CYLINDERS

Type Description Part Number15 Year Cylinder SCBA – 30 Minute – 2216 PSI – Standard Composite – Scott Type – No Valve – 15 yr SCBA-SC-30-2216-G

15 Year Cylinder SCBA – 30 Minute – 2216 PSI Standard Composite – MSA Type – No Valve – 15 yr SCBA-SC-30-2216-MSA

15 Year Cylinder SCBA – 30 Minute – 4500 PSI Standard Composite – Scott/MSA Type – No Valve – 15 yr SCBA-SC-30-4500-A

15 Year Cylinder SCBA – 30 Minute – 4500 PSI Standard Composite – ISI/Survivair Type – No Valve – 15 yr SCBA-SC-30-4500-B

15 Year Cylinder SCBA – 45 Minute – 4500 PSI Standard Composite – Scott/MSA Type – No Valve – 15 yr SCBA-SC-45-4500-A

30 Year Cylinder SCBA – 45 Minute – 4500 PSI Standard Composite – Scott/MSA Type – No Valve – 30 yr SCBA-SC-45-4500-A-30

30 Year Cylinder SCBA – 45 Minute – 4500 PSI Standard Composite – ISI/Survivair Type – No Valve – 30 yr SCBA-SC-45-4500-B-30

Aluminum Cylinders For Aluminum 3AL SCBA Cylinders Contact your All Safe Global Representative Call 866-958-3473

DuraLite Cylinders For Dura Lite 15 Year Composite SCBA Cylinders Contact your All Safe Global Representative Call 866-958-3473

SCBA & LIFE SAFETYCYLINDERS

SCBA-SC-45-4500-A-30SCBA-SC-30-2216-G

Cylinders types available for Draeger, Interspiro, ISI, Sperian, Survivair, MSA, and Scott type systems.

For medical cylinders see pages 56–57.


see page 4


S-4500-90-DRAEGER

SCBA VALVES

Type Description Part NumberGeneric Generic SCBA Valve, 2216 PSI with 180° Outlet S-2216-180-GEN

Generic Generic SCBA Valve 3000 PSI S-3000-GEN

Generic Generic SCBA Valve 4500 PSI with 180° Outlet S-4500-180-GEN

Interspiro Interspiro Type SCBA Valve, 2216 PSI, Diamond-Shaped Non-Locking Handle S-2216-INTER-DIA

Interspiro Interspiro Type SCBA Valve, 4500 PSI, Diamond-Shaped Non-Locking Handle S-4500-INTER-DIA

Scott Scott Type SCBA Valve, 4500 PSI, w/Tri-Lobed Locking Handle & Clip S-4500-SCOTT-TRI

Scott Scott Type SCBA Valve, 2216 PSI, w/Tri-Lobed Locking Handle & Clip S-2216-SCOTT-TRI

Scott Scott Type SCBA Valve, 4500 PSI, w/Round Locking Handle & Clip S-4500-SCOTT-RD

Scott Scott Type SCBA Valve, 2216 PSI, w/Round Locking Handle & Clip S-2216-SCOTT-RD

Draeger Draeger Type SCBA Valve, 4500 PSI, 90° Outlet w/Locking Handle S-4500-90-DRAEGER

Draeger Draeger Type SCBA Valve, 2216 PSI, 90° Outlet w/Locking Handle S-2216-90-DRAEGER

SCBA VALVES

SCBA & LIFE SAFETYVALVES CGA Fitting

by Gas Service see page 4

87 [email protected] / 866-958-3473DRY CHEMICAL & CO2 FIRE EXTINGUISHERS

DRY CHEMICAL FIRE EXTINGUISHERS

Size Description Part Number2.5 lb. Dry Chemical 2.5 lb. ABC Extinguisher with Vehicle Bracket B250M

5 lb. Dry Chemical 5 lb. ABC Extinguisher with Wall Hook B5M



CO2 FIRE EXTINGUISHERS

Size Description Part Number5 lb. CO2 5 lb. CO2 Fire Extinguisher B5V

10 lb. CO2 10 lb. CO2 Fire Extinguisher B10V



SCBA & LIFE SAFETYFIRE EXTINGUISHERS

B250M B5M B10M B20M EXTMOUNT


11HAB

HALOTRON, CLASS K, & WATER FIRE EXTINGUISHERS

SCBA & LIFE SAFETYVALVES

CLASS K FIRE EXTINGUISHERS

Type Description Part NumberClass K Class K 6 Liter Extinguisher with Wall Hook & Signage WC100

WATER EXTINGUISHERS

Size Description Part Number2.5 Gallon 2.5 Gallon Water Extinguisher with Wall Hanger WP61

WP61WC100

HALOTRON FIRE EXTINGUISHERS

Size Description Part Number2.5 lb. 2.5 lb. Halotron Extinguisher with Wall Hook 2.5HAB

5 lb. 5 lb. Halotron Extinguisher with Wall Hook 5HAB

11 lb. 11 lb. Halotron Extinguisher with Wall Hook 11HAB

15 lb. 15.5 lb. Halotron Extinguisher with Wall Hook 15HAB

We carry a wide variety of brackets and cabinets. Ask your All Safe Global represenative for more details.

89 [email protected] / 866-958-3473CYLINDER SERVICES

Hydrostatic Testing

The industry standard method of requalifying (recertifying) compressed and packaged gas cylinders, to determine whether they are safe for continued use. Testing includes an in-depth visual examination of the cylinder’s interior and exterior and a water pressure test.

Hydrostatic testing is required by the Department of Transportation for refrigerant cylinders, SCUBA tanks, SCBA tanks, aircraft cylinders, fireextinguishercylinders,beverage(CO2)cylinders,andcommoncompressed gas cylinders, including oxygen, argon, helium, nitrogen, hydrogen, air, nitrous oxide, and others.

Aluma Furb

Thisfantasticrefurbishingprocessrefinishesandclearcoatsyour aluminum cylinder. When coupled with a hydrostatic test (recertification),AlumaFurbisaverycost-effectivealternativetopurchasing new cylinders, bringing your cylinder back to “like new" condition for half the price!

Aluminum Cylinder Cleaning/Label Removal

Aluminum oxygen cylinders can be made to look nearly new again. Our proprietary cleaning process and cylinder shoulder painting is a lower-cost alternative to completely refurbishing the cylinder. The processisusuallyperformedwhenacylinderinneedofrecertificationis already in our facility.

Propane Recertification

RecertificationofpropaneandLPgascylindersisdue12yearsafterthe original manufacturer date and every 5 years thereafter. In addition to recertifying your propane cylinders, we can shot-blast and repaint reconditionable cylinders.

Cylinder Exterior Blasting and Painting

All Safe Global uses cylinder-blasting machines to remove all paint, scale, and exterior contaminants from the cylinder. The cylinder is left with an ideal surface for applying an exterior coating.

All Safe Global is one of the largest DOT cylinder service centers in the U.S. With over 37 years in the business, we

have the experience, technical knowledge, and attention to detail necessary for exceptional cylinder service.

We offer testing and visual inspection to re-certify high- and low-pressure cylinders as well as a full range of

reconditioning services. A full list of our services is found below.

Hundreds of thousands of cylinders pass through our testing and reconditioning facility every year, so you can count

on us to be your cylinder resource.

We also understand your need for a quick turn-around on orders. Our cylinder service operates daily, so your

cylinderswillalwaysbereadywhenyouneedthem.Toprovidethemostefficientservicepossible,wehaveour

ownfleetofcommercialvehiclesdeliveringregularly,andhavegreatfreightratesforareasoutsideofournormal

delivery area.

CYLINDER SERVICES

90 [email protected] / 866-958-3473CYLINDER SERVICES

CYLINDER SERVICES

Internal Shot Blasting (ISB)

ISB is the most effective method for removing rust and corrosion from inside steel cylinders. It obsoletes the older method of cylinder tumbling.

Cylinder Exterior Blasting and Painting

All Safe Global uses cylinder-blasting machines to remove all paint, scale, and exterior contaminants from the cylinder. The cylinder is left with an ideal surface for applying an exterior coating.

Cylinder Stenciling, Embossing and Neck Rings

We can stencil or stamp your name on your cylinders, and replace or retighten neck rings.

CO2 Cylinder Filling

AllSafeGlobalcanfillanyCO2cylinder,includingfillingpurchasedcylinders prior to shipping. Contact your representative for details.

LPG /PROPANE CYLINDERS & SERVICES

Type Number5 lb. – Blast/Paint/Recertify/Valve-Install BPR-5

10 lb. Tall – Blast/Paint/Recertify/Valve-Install BPR-10

10 lb. Pancake – Blast/Paint/Recertify/Valve-Install BPR-10P

11.5 lb. Blast – Blast/Paint/Recertify/Valve-Install BPR-11.5

20 lb. – Blast/Paint/Recertify/Valve-Install BPR-20


33.5 lb. – Blast/Paint/Recertify/Valve-Install BPR-33.5

Forklift Gauge Replacement – SHOP RATE FRK-GA



50 lb. – BBlast/Paint/Recertify/Valve-Install BPR-50

60 lb. – BBlast/Paint/Recertify/Valve-Install BPR-60


5 lb. – CO2 Cylinder Fill RC05H





CYLINDER SERVICES

CYLINDER SERVICES

REFRIGERANT SERVICES

Type Number30 to 50 lbs. REFRIG-HYDRO-30

51 to 990 lbs. REFRIG-HYDRO-50

1000 lbs. REFRIG-HYDRO-1000

MEDICAL SERVICES E SIZE & SMALLER

Type NumberHydrotest&Recertification MED-HYDRO

TeflonO-Ring(required) T-ORING

870AY NO TOGGLE Installed End of Line 870AY-SHER

Alumafurb/Clear Coat/Paint Dome ALUMAFURB

Label Removal & Clean LRC

INDUSTRIAL SERVICES 20 CU FT TO 585 CU FT

Type NumberHydro HYDRO

Valve VALVESINSTALLED

Blast / Paint BP

Label Removal LRC

92 [email protected] / 866-958-3473TERMS AND CONDITIONS

TERMS AND CONDITIONS

ATTENTION: PLEASE READ THESE TERMS CAREFULLY BEFORE USING THIS CATALOG OR ORDERING PRODUCT. USING THIS CATALOG INDICATES THAT YOU ACCEPT THESE TERMS. IF YOU DO NOT ACCEPT THE TERMS NOTED HEREIN, DO NOT USE THIS CATALOG.

Applicability

A sales order document denoting pricing, quantities, Customer’s name, delivery details, Terms and Conditions of sale and other pertinent information is generated by the Seller for each sales transaction (“Sales Order”). The Terms and Conditions on the Sales Order (referred to here as “Terms” or “Agreement”) are the only terms that govern the sale of the goods (“Goods”) by All Safe Global, Inc., American Cylinder, Inc. (d/b/a All Safe and All Safe Global) (collectively; ”Seller”) to the Customer. The customer is the user of this catalog and/or Buyer of Goods (“Customer”). These Terms prevail over any general terms and conditions of purchase submitted by Customer. Customer is subject to the terms of use of this Catalog.

Ordering

All Safe Global, is regularly open for business Monday through Friday, 7:30AM – 4:00PM CST. Phone orders may be placed during business hours at (866) 958-3473. Fax orders may be submitted to (651) 408-7163. Online orders should be submitted via email to [email protected].

Minimum Orders

All Safe Global requires minimum order amounts for certain products and specific quantities to be purchased of certain items to receive designated pricing. Contact your sales representative for details. Orders of those products that do not meet the minimum are subject to a $25 service fee and higher pricing. The $25 minimum order fee will be added to the total invoice amount. Prices provided in this document or in supplements reflect specific

order quantity requirements. Items ordered outside of these specific quantities may be priced at different levels. All Safe Global may ship partial orders and adjust orders to meet the nearest quantity break for a specific price.

Payment

All Safe Global accepts payment via commercial check, wire transfer, or ACH. We also accept Visa, MasterCard, American Express, and Discover cards. Credit card purchases are subject to a 4% processing fee. Accounts seeking Net 30 terms are subject to credit approval and must submit a credit request with references in writing. Payments must be received in advance for orders placed on accounts without open terms. Past-due invoices may delay the release of pending shipments.

Customer will pay interest on all late payments at the lesser of the rate of 1.5% per month or the highest rate permissible under applicable law, calculated daily and compounded monthly. Customer will reimburse Seller for all costs incurred in collecting any late payments, including, without limitation, attorneys’ fees. In addition to all other remedies available under these Terms or at law (which Seller does not waive by the exercise of any rights hereunder), Seller will be entitled to suspend the delivery of any Goods if Customer fails to pay any amounts when due hereunder.

Customer will not withhold payment of any amounts due and payable by reason of any set-off of any claim or dispute with Seller, whether relating to Seller’s breach, bankruptcy or otherwise.

Shipping Terms

While most items ship within 24 to 48 hours of order processing, the standard lead time on build-to-stock items is 5 to 10 business days, not including transit time. Lead time on non-stock items, special orders, and other items may vary. Seller typically delivers Goods FCA Seller’s facility in Wyoming, Minnesota (INCOTERMS 2010) (the “Delivery Point”) using Seller’s standard methods for packaging and shipping such Goods unless otherwise specified in

93 [email protected] / 866-958-3473TERMS AND CONDITIONS


the Sales Order. The cost of shipping and insurance (if requested by Customer) will be prepaid by Seller and added to the invoice of Goods. Customer-arranged freight is subject to administrative and handling fees. All Safe Global’s normal dock hours are Monday through Friday, 7:00am to 2:30pm CST. Completed orders received before 2:00 p.m. CST will generally be processed on the same business day. Orders received after 2:00 p.m. CST will generally be processed on the next business day. All requests for same day shipping must be received before 12:00 p.m. CST. Same-day shipping may not be available.

Title and Risk of Loss

Title and risk of loss passes to Customer upon delivery of the Goods at the Delivery Point. As collateral security for the payment of the purchase price of the Goods, Customer hereby grants to Seller a lien on and security interest in and to all of the right, title and interest of Customer in the Goods, wherever located, and whether now existing or hereafter arising or acquired from time to time, and in all accessions thereto and replacements or modifications thereof, as well as all proceeds of the foregoing. The security interest granted under this provision constitutes a purchase money security interest under the Minnesota Uniform Commercial Code.

Order Cancellation

Any order placed for same day shipping may not be cancelled or changed. All standard lead time orders require a minimum of 24 hours between the scheduled ship date and notice of cancellation. Staged or loaded merchandise may be subject to a 15% to 25% restocking fee at Seller’s discretion. Sales of custom and special order merchandise are final and may not be cancelled and merchandise may not be returned.

Inspection and Rejection of Nonconforming Goods

Customer will inspect the Goods within two business days of

receipt (”Inspection Period”). Customer will be deemed to have accepted the Goods unless it notifies Seller in writing of any Nonconforming Goods during the Inspection Period and furnishes such written evidence or other documentation as reasonably required by Seller. “Nonconforming Goods” means only the following: (i) product shipped is different than identified in Customer’s purchase order; or (ii) product’s label or packaging incorrectly identifies its contents.

If Customer timely notifies Seller of any Nonconforming Goods, Seller will, in its sole discretion, (i) replace such Nonconforming Goods with conforming Goods, or (ii) credit or refund the Price for such Nonconforming Goods, together with any reasonable shipping and handling expenses incurred by Customer in connection therewith. Customer will ship, at its expense and risk of loss, the Nonconforming Goods to Seller’s facility located in Wyoming, Minnesota. If Seller exercises its option to replace Nonconforming Goods, Seller will, after receiving Customer’s shipment of Nonconforming Goods, ship to Customer, at Customer’s expense and risk of loss, the replaced Goods FCA Delivery Point.

Customer acknowledges and agrees that the remedies set forth in Section 4(b) are Customer’s exclusive remedies for the delivery of Nonconforming Goods.

Customer is responsible for checking orders upon delivery to ensure that they are complete and undamaged. If your shipment arrives damaged or shows evidence of tampering, notify the carrier immediately in writing and note any discrepancies on all copies of your delivery paperwork. Customers can partially accept, or refuse, damaged or tamper-evident shipments.

Claims against the carrier for damage or loss should be initiated with the carrier by the receiver. All Safe Global has no recourse to file claims against carriers for shipments delivered freight collect or those signed for as received in good condition.


94 TERMS AND CONDITIONS [email protected] / 866-958-3473

Warranty and Returns

Products manufactured by a third party (”Third Party Product”) constitute substantially all of the Goods. The SELLER MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE GOODS, INCLUDING ANY (i) WARRANTY OF MERCHANTABILITY; (ii) WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; OR (iii) WARRANTY AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF A THIRD PARTY, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE.

Seller warrants to Customer that for a period of 30 days from the date of shipment of the Goods (“Valve Service Warranty Period”), that any valve installation services performed by Seller will be free from material defects in workmanship. In case of breach of the warranty in this Section, Seller will, in its sole discretion, either: (i) repair or replace such Goods (or the defective part) or (ii) credit or refund the price of such Goods at the pro rata contract rate provided that, if Seller so requests, Customer will, at Seller’s expense, return such Goods to Seller. THE REMEDIES SET FORTH IN SECTION SHALL BE THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY AND SELLER’S ENTIRE LIABILITY FOR ANY BREACH OF THE (continued over)LIMITED WARRANTY SET FORTH IN THIS SECTION.

Some products may have manufacturer’s warranties provided by the manufacturer. For questions about manufacturer’s warranties contact your All Safe Global representative.

Before any item is returned to All Safe Global, for any reason, a Return Material Authorization number must be obtained from our Customer Service Department.

Availability and Pricing

Availability and prices are subject to change without notice. All Safe Global reserves the right to amend quoted prices and minimum quantities on parts and/or components. Customer will

purchase the Goods from Seller at the price(s) (the “Price(s)”) set forth in the Sales Order.

The Price, and all prices, are Seller’s confidential information and will not be disclosed to any third party by the Customer. Unless otherwise stated on the Sales Order, all Prices are stated in US dollars and do not include shipping, transportation, storage, special packaging or services, insurance, sales, use and excise taxes, and any other similar taxes, duties and charges of any kind imposed by any Governmental Authority on any amounts payable by Customer. Customer will be responsible for all such charges, costs and taxes; provided, that, Customer will not be responsible for any taxes imposed on, or with respect to, Seller’s income, revenues, gross receipts, personnel or real or personal property or other assets.

Catalog Content

All content and materials contained in the Catalog are the property of Seller. Any use or reuse of this content without expressed written permission of Seller is strictly prohibited. Permission to otherwise reprint or electronically reproduce any page in part or in its entirety is expressly prohibited unless prior written consent has been obtained. All Rights Reserved © 1999–2016 American Cylinder, Inc.

Seller and its affiliates do not make any representations or warranties as to accuracy of the information in this Catalog. Customer should not rely on the information in this Catalog to determine the appropriate product, service or procedure for use in your application. The Customer, and/or user of any products or services from All Safe, is strictly responsible for ensuring their safe usage and that the products meet all applicable safety requirements and government regulations that may apply.


95 TERMS AND CONDITIONS [email protected] / 866-958-3473

Limitation of Liability

IN NO EVENT SHALL SELLER BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOSS OF USE, REVENUE OR PROFIT, OR FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR PUNITIVE DAMAGES WHETHER ARISING OUT OF BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, REGARDLESS OF WHETHER SUCH DAMAGES WERE FORESEEABLE AND WHETHER OR NOT SELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND NOTWITHSTANDING THE FAILURE OF ANY AGREED OR OTHER REMEDY OF ITS ESSENTIAL PURPOSE.

IN NO EVENT SHALL SELLER’S AGGREGATE LIABILITY ARISING OUT OF OR RELATED TO THIS AGREEMENT, WHETHER ARISING OUT OF OR RELATED TO BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, EXCEED THE TOTAL OF THE AMOUNTS PAID TO SELLER FOR THE GOODS SOLD HEREUNDER.

In no event will Seller be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data, business interruption or human injury) arising out of the use, inability to use, or the results of use of this Catalog, any websites linked to this Catalog, or the materials or information or services contained herein or at any or all such websites, whether based on warranty, contract, tort or any other legal theory and whether or not advised of the possibility of such damages. If your use of the materials, information or services from this Catalog results in the need for servicing, repair, medical attention or correction of equipment or data, you assume all costs thereof. This Catalog does not provide legal advice and visitors should refer any such questions to a qualified Attorney. Furthermore, Seller makes no representations or warranties regarding the condition or functionality of websites it may link to, their suitability for use, or that these links will be uninterrupted. Applicable law may not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may be limited by law and in such cases should be interpreted to be enforced to the

full extent allowed by law.

Warning; Customer’s Duty to Warn; Indemnification of Seller

Compressed gas equipment is dangerous and poses a risk of explosion, fire, suffocation, poisoning, extreme temperature, crushing and related injuries. Misuse, using the wrong equipment, or using equipment under unsafe conditions can result in bodily injury, and/or death. Customer alone is responsible for determining what equipment to use. Customer acknowledges that Seller does not customarily affix to Goods warnings labels that set forth hazards related to use of Goods themselves or intended contents (“Product Warnings”), because, as Customer hereby acknowledges, Seller is not aware of the ultimate use of Goods or contents with which Goods will be filled. Customer further acknowledges that Customer has a duty to warn end-users about dangers inherent in filling and using high-pressure gas cylinders, including a duty to warn end-users about dangers related to filling cylinders with certain gases (including those designated as hazardous substances), and that Seller has no such duty. Customer will be solely responsible for, and assumes all obligations for and liability associated with, determining the use of Goods and the foreseeable maintenance and refilling risks, as well as affixing to Goods all appropriate warning labels, including those warning labels required by law and any appropriate Product Warnings. Customer will defend, indemnify and hold Seller harmless against all claims and losses arising out of or related to (i) failure or alleged failure to provide or affix warning labels, including Product Warnings, on Goods, (ii) any deficiencies in warning labels provided or affixed to Goods, or (iii) Seller’s act of providing or/and affixing warning labels to Goods in accordance with Customer’s specifications, including causes of action in negligence, tort, product liability, strict liability or warranty.

ALL SAFE GLOBAL, INC.

Freight & Service Center Location26443 Fallbrook AvenueWyoming, MN 55092

Walk-In Sales & CO2 Fills26453 Fallbrook AvenueWyoming, MN 55092

Website: www.allsafe.net Toll Free: 866-958-3473 Fax: 651-408-7163

Documents

PRODUCT CATALOG - allsafe.netallsafe.net/files/All_Safe_Catalog.pdf320 Carbon Dioxide 350 Carbon Monoxide 660 Chlorine 510 Cyclopropane 350 Deuterium 350 Ethane ... 100 lb. Steel LPG