PROCESS EQUIPMENT BUYER’S GUIDE - GRISAgrisa.com.mx/web/images/pdf/GRACO/Catalogo Completo GRACO...PROCESS EQUIPMENT BUYER’S GUIDE PROCESS EQUIPMENT CATALOG1 Table of Contents

P R O V E N Q U A L I T Y . L E A D I N G T E C H N O L O G Y .

Diaphragm Pumps for Industrial and Sanitary Applications

PRO

CESS

EQ

UIPM

ENT

PROCESS EQUIPMENTBUYER’S GUIDE

1PROCESS EQU IPMENT CATALOG

Table of Contents

PROCESS EQUIPMENT AND ACCESSORIES TABLE OF CONTENTSSelection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

The Husky™ Air Valve Difference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Husky Features & Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Husky Diaphragm Pump Model Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

Husky Diaphragm Pump Selection Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Husky 205 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13

Husky 307 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-17

Husky 515 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-21

Husky 716 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-25

Husky 1040 Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-29

Husky 1040 Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-33

Husky 1590 Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-37

Husky 1590 Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-41

Husky 2150 Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-45

Husky 2150 Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-49

Husky 3275 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-53

Husky 1040 FDA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54-57

Husky 1590 FDA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-61

Husky 2150 FDA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-65

Fast-Flo 1:1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66-67

Standard 2:1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68-69

Hydra-Clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-73

Husky Transfer Pump Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74-77

CycleFlo™ and CycleFlo II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-82

Surge Suppressors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83-85

Pump Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86-90

2 PROCESS EQU IPMENT CATALOG

Reliable pumping solutions.When it comes to process applications, it’s tough to beat these Graco pumps! We offer a variety of piston transferand Husky air-operated double diaphragm pumps for your low to high viscosity fluids. Every pump is manufacturedwith your productivity in mind – providing you a more reliable, efficient pump!

Try Graco’s Husky Pumps for FREE*!Look for the “Try Before You Buy” logo

• Try Before you Buy Features– 60 day free customer trial

– 90 day distributor dating

• No arm twisting, no hidden clauses, no questions

• Send it back at the end of the trial for a full refund– Must arrive at Graco before the end of the 90 day period to avoid non-payment– Day 1 is shipment date of product from Graco

– Distributor to clean product (remove hazardous/toxic materials) prior to shipping

*May not be available in all geographic areas. Visit www.graco.com/process for more details.

Husky 205 Husky 307 Husky 515 Husky 716 Husky 1040 Husky 1590

Model Plastic Plastic Plastic Metal Plastic PlasticMetal Metal

Typical Waterborne materials Paints Cleaning fluids Oil Chemicals ChemicalsApplication Paints Lubricants Chemicals Water Acids Corrosive fluids

Chemicals Inks Ceramic glazes Most solvents Adhesives Acids and gasesDetergents Stains Inks Resins LatexInks Solvents Solvents Ceramic slips Abrasive fluids

Coatings Flammables Slurries SlurriesDye Acids Solvents Sludge

Reference 10-13 14-17 18-21 22-25 26-33 34-41Page


Husky Husky 2150 Husky 3275 Husky FDA Transfer Pumps Hydra-Clean

Model Plastic Metal Husky 1040 Fast-Flo 1:1 President® 10:1Metal Husky 1590 Standard 2:1 Bulldog 10:1

Husky 2150 Premier® 34:1

Typical Acids and gases Chemicals Fruit juice Anti-freeze WaterApplication Stripping chemicals Bulk paint resins Frozen concentrate Transmission fluid Detergent solutions

Alkalies Ceramic slip Mayonnaise General chemicals Chemical solutionsSolvents Tomato paste SolventsSludge Corn syrup AdhesivesWaste water Jam and jelly Resins

Icing Oil

Reference 42-49 50-53 54-65 66-69 70-73Page

4

Air-Operated Double-Diaphragm PumpsThe Husky Air Valve Difference

PROCESS EQU IPMENT CATALOG

All Husky Air-Operated Double-Diaphragm pumps feature simple, exceptionally reliable air valves thatmake the Husky line among the most reliable pumpsin a variety of applications.

The unique, patented air valve design has a three-waypilot valve for true non-sticking operation. All parts arereplaceable without opening wetted body parts.

Husky pumps have a 15 year air valve center sectionwarranty and a 5 year pump warranty. See pumpinstruction manuals for complete warranty details.

You'll benefit from these Husky advantages:

• Closed-center design on the 1/2 in (12.7 mm)through 3 in (76.2 mm) pumps blocks air inlet from air exhaust during changeover for handlingunconditioned air without hang-ups

• 100% externally-serviceable air valve that requiresno lubrication for cleaner operation

• Fewer moving parts than you’ll find in many other double-diaphragm pumps for increased durability

• Pilot-pin-actuated pneumatic trigger provides reliablemechanical shifting day in and day out

• Common center section and air valve in 1 in (25.4 mm) and 2 in (50.8 mm) pumps for reduced inventory


Husky Features & BenefitsThe Quality and Simplicity Inside!

EASY MAINTENANCE• Low internal volume reduces waste and makes clean-up easy

• Stainless steel bolts resist corrosion and provide positive positioning for easy reassembly

UNIQUE, PATENTED AIR VALVE• Three-way pilot valve for no-stick operation

• All parts are replaceable without opening wet body parts

• No air-line lubrication required

PRECISION-FITTED PARTS• Long-wearing End Bearings assure positive rod alignment

and are easy to replace

PROTECTIVE EXHAUST PORT• Common port for all exhaust prevents vapors in room from

attacking air motor seals

• Easily submerges for sump or disposal operations sitting idle

RUGGED EXTERIOR CONSTRUCTION• Construction resists corrosion, prevents leakage and ensures

clean fluid changes

• Aluminum center sections are epoxy coated

• Corrosion resistant center sections are 316 stainless steel

FLUID COMPATIBILITY• Housings available in aluminum, stainless steel, ductile iron,

polypropylene, groundable acetal or Kynar

POSITIVE SEAL DESIGN• Diaphragm firmly locked in place

• Formed bead acts as a positive fluid seal

• One thru-hole

HEAVY DUTY DIAPHRAGM PLATES• Positive grip plates virtually eliminate leakage and pull-out,

preventing costly downtime

LONG LASTING ROD DESIGN• 300 Series stainless steel rod designed for long life and

corrosion resistance — even in wet air

EASY ALIGNMENT• Bolted, self-aligning air and fluid sections

CHOICE OF ELASTOMERS• Wide range of seat and ball options ensure fluid compatibility

and positive seal for maximum efficiency, long life and bettersuction lift

F

F

G

G

H

H

I

I

J

J

K

K

A

A

B

B

C

D

D

C

E

E

6

Air-Operated Double-Diaphragm PumpsModel Overview


*Flow rates are with muffler and do not vary based on diaphragm material.**For pumps with stainless steel center sections, add the following to the weight

Husky 1040 increase weight by 11.92 lb (5.4 kg) for stainless steel center sectionsHusky 1590 increase weight by 13.3 lb (6.0 kg) for stainless steel center sectionsHusky 2150 increase weight by 19.46 lb (8.8 kg) for stainless steel center sections

Model Husky 205 Husky 307 Husky 515 Husky 716 Husky 1040 Husky 1040 Husky 1040 Plastic Plastic Plastic Metal Plastic Metal FDA

Connection 1/4 in (6.3 mm) 3/8 in (9.4 mm) 1/2 in (12.7 mm) or 3/4 in (19.1 mm) 1 in (25.4 mm) 1 in (25.4 mm) 1-1/2 in (38.1 mm)Size 3/4 in (19.1 mm)

Thread NPT or BSP NPT or BSP NPT or BSP NPT or BSP ANSI Flange NPT or BSP Tri-ClampType

Air Standard and Standard Standard and Standard and Standard and Standard and Standard and Valve Remote Remote Remote Remote Remote Remote

Maximum 5 gpm 7 gpm 15 gpm 16 gpm 40 gpm 40 gpm 40 gpmFlow Rate* (19 lpm) (26 lpm) (57 lpm) (61 lpm) (151 lpm) (151 lpm) (151 lpm)

Maximum 100 psi 100 psi 100 psi 100 psi 120 psi 120 psi 120 psiDischarge (7.0 bar, 0.7 MPa) (7.0 bar, 0.7 MPa) (7.0 bar, 0.7 MPa) (7.0 bar, 0.7 MPa) (8.3 bar, 0.8 MPa) (8.3 bar, 0.8 MPa) (8.3 bar, 0.8 MPa)Pressure

Materials of Polypropylene, Polypropylene, Polypropylene, Aluminum, Polypropylene, Aluminum, 316 Stainless SteelConstruction Kynar (PVDF), Acetal Kynar (PVDF), 316 Stainless Steel Kynar (PVDF), 316 Stainless SteelAvailable Acetal Acetal Acetal

Center Polypropylene Coated Aluminum Polypropylene Polypropylene Coated Aluminum, Coated Aluminum Coated AluminumSection 316 Stainless Steel 316 Stainless Steel 316 Stainless SteelAvailable

Pump 2.0 lb (0.9 kg) 4.75 lb (2.2 kg) 6.5 lb (2.9 kg) 8.5 lb (3.9 kg) 19 lb (8.6 kg) 18 lb (8.2 kg) 34 lb (16 kg)Weight** Polypropylene Acetal Polypropylene Aluminum Polypropylene Aluminum Stainless Steel

2.5 lb (1.1 kg) 5.2 lb (2.4 kg) 7.8 lb (3.5 kg) 18 lb (8.2 kg) 22 lb (10 kg) 33 lb (15 kg)Acetal Polypropylene Acetal Stainless Steel Kynar Stainless Steel

2.8 lb (1.3 kg) 8.5 lb (3.9 kg) 25 lb (11.3 kg)Kynar Kynar Acetal

Maximum 0.06 in (1.5 mm) 0.063 in (1.6 mm) 0.094 in (2.5 mm) 0.094 in (2.5 mm) 0.125 in (3.2 mm) 0.125 in (3.2 mm) 0.125 in (3.2 mm)Solids


Model Husky 1590 Husky 1590 Husky 1590 Husky 2150 Husky 2150 Husky 2150 Husky 3275Plastic Metal FDA Plastic Metal FDA Metal

Connection 1-1/2 in (38.1 mm) 1-1/2 in (38.1 mm) 2 in (50.8 mm) 2 in (50.8 mm) 2 in (50.8 mm) 2-1/2 in (63.5 mm) 3 in (76.2 mm)Size

Thread ANSI Flange NPT or BSP Tri-Clamp® ANSI Flange NPT or BSP Tri-Clamp DIN/ANSI, NPTType and BSPT

Air Standard and Standard and Standard and Standard and Standard and Standard and StandardValve Remote Remote Remote Remote Remote Remote

Maximum 100 gpm 100 gpm 100 gpm 150 gpm 150 gpm 150 gpm 275 gpmFlow Rate (379 lpm) (379 lpm) (379 lpm) (568 lpm) (568 lpm) (568 lpm) (1041 lpm)

Maximum 120 psi 120 psi 120 psi 120 psi 120 psi 120 psi 120 psiDischarge (8.3 bar, 0.8 MPa) (8.3 bar, 0.8 MPa) (8.3 bar, 0.8 MPa) (8.3 bar, 0.8 MPa) (8.3 bar, 0.8 MPa) (8.3 bar, 0.8 MPa) (8.3 bar, 0.8 MPa)Pressure

Materials of Polypropylene, Aluminum, 316 Stainless Steel Polypropylene, Aluminum, 316 Stainless Steel AluminumConstruction Kynar (PVDF) 316 Stainless Steel Kynar (PVDF) 316 Stainless Steel,Available Ductile Iron

Center Coated Aluminum, Coated Aluminum, Coated Aluminum, Coated Aluminum, Coated Aluminum, Coated Aluminum, Coated AluminumSection 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless SteelAvailable

Pump 35 lb (16 kg) 33.5 lb (15.2 kg) 72 lb (32.7 kg) 49 lb (22 kg) 58 lb (26.3 kg) 122 lb (50.8 kg) 165 lb (68 kg)Weight Polypropylene Aluminum Stainless Steel Polypropylene Aluminum Stainless Steel Aluminum

49 lb (22 kg) 85 lb (38.6 kg) 68 lb (31 kg) 127 lb (57.6 kg)Kynar Stainless Steel Kynar Stainless Steel

130 lb (59 kg)Ductile Iron

Maximum 0.188 in (4.8 mm) 0.188 in (4.8 mm) 0.188 in (4.8 mm) 0.25 in (6.3 mm) 0.25 in (6.3 mm) 0.25 in (6.3 mm) 0.375 in (9.4 mm)Solids

8

Pump Selection Key Husky Designation


Diaphragm Pump Kit DesignationWhen selecting a kit, use the same code numbers as for the pumps regarding pump size, seat, ball/checks and diaphragm.

Pump DesignationPart numbers are located on ID tag on center section of all Husky diaphragm pumps.

D X X X X X

D O X X X X

DiaphragmPump

WettedPartsPump Size

SeatsBalls/Checks

Diaphragms

PUMP SIZE (AIR MOTOR TYPE AND MATERIAL) WETTED PARTS SEATS BALLS DIAPHRAGM

* = BSP plastic in 1/2" (12.7mm) pumps>1" Plastic pumps flange connections3" Aluminum pumps flange connections

1 = 1/4" (6.35 mm) Standard: polypropylene center section 1 = Acetal (npt) 2 = Acetal 1 = PTFE 1 = PTFE2 = 1/4" (6.35 mm) Remote: polypropylene center section 2 = Poly (npt) 3 = Stainless Steel 2 = Acetal 5 = Hytrel3 = 3/8" (9.52 mm) Standard: aluminum center section 3 = Aluminum (npt) 4 = Hardened SST 3 = Stainless Steel 6 = Santoprene5 = 1/2" (12.7 mm) Standard: aluminum center section 4 = Stainless Steel (npt) 5 = Hytrel 4 = Hardened SST 7 = Buna N4 = 1/2" (12.7 mm) Remote: polypropylene center section 5 = Kynar (npt) 6 = Santoprene 5 = Hytrel 8 = Viton5 = 3/4" (19.05 mm) Standard: polypropylene center section 6 = Ductile Iron (npt) 7 = Buna N 6 = Santoprene G = Geolast4 = 3/4" (19.05 mm) Remote: polypropylene center section 8 = Viton 7 = Buna N7 = 1" (25.4 mm) Standard: aluminum center section A = Acetal * (bsp) 9 = Polypropylene 8 = Viton8 = 1" (25.4 mm) Remote: aluminum center section B = Poly * (bsp) A = Kynar 9 = PolypropyleneR = 1" (25.4 mm) Standard: stainless steel center section C = Aluminum (bsp) G = Geolast A = KynarS = 1" (25.4 mm) Remote: stainless steel center section D = Stainless Steel (bsp) G = GeolastB = 1-1/2" (38.1 mm) Standard: aluminum center section E = Kynar (bsp) B = SST with viton sealC = 1-1/2" (38.1 mm) Remote: aluminum center section F = Ductile Iron (bsp) C = Santoprene with T = 1-1/2" (38.1 mm) Standard: stainless steel center section viton sealU = 1-1/2" (38.1 mm) Remote: stainless steel center section H = 2 npt Alum ExtendedF = 2" (50.8 mm) Standard: aluminum center section G = 2 bsp Alum ExtendedG = 2" (50.8 mm) Remote: aluminum center sectionV = 2" (50.8 mm) Standard: stainless steel center section S = Food Grade FDAW = 2" (50.8 mm) Remote: stainless steel center sectionK = 3" (76.2 mm) Standard: aluminum center section

DiaphragmPump

Pump SizeKIt Seats

Balls/Checks Diaphragms

0 = No seat2 = Acetal3 = Stainless Steel4 = Hardened SST5 = Hytrel6 = Santoprene7 = Buna N8 = Viton9 = PolyA = KynarB = SST with viton sealC = Santoprene with

viton sealG = Geolast

1 = PTFE2 = Acetal3 = Stainless Steel4 = Hardened SST5 = Hytrel6 = Santoprene7 = Buna-N8 = Viton9 = PolyA = KynarG = Geolast

0 = No Balls/Chacks

1 = PTFE5 = Hytrel6 = Santoprene7 = Buna-N8 = VitonG = Geolast

0 = No Diaphragm

Pump Size Seats Balls/Checks Diaphragm

1 = 1/4 in (6.35 mm) 3 = 3/8 in (9.52 mm)5 = 1/2 in (12.7 mm) and 3/4 in (19.05 mm) 7 = 1 in (25.4 mm) metal pump8 = 1 in (25.4 mm) plastic pumpB = 1-1/2 in (38.1 mm) metal pumpC = 1-1/2 in (38.1 mm) plastic pump F = 2 in (50.8 mm) metal pumpG = 2 in (50.8 mm) plastic pumpK = 3 in (76.2 mm)


Pump Selection Key Wetted Parts Material Options

Acetal Material used for seats, balls & wetted body parts

• Wide range of solvent resistance

• Withstands extreme fatigue

• Good level of abrasion resistance

• Groundable for use with flammables

• Not for use with acids or bases

Aluminum Material used for air motor & wetted body parts

• Medium corrosion and abrasion resistance

• Not for use with HHC’s

Ductile Iron Material used for wetted body parts

• High abrasion resistance

• Low cost alternative to stainless steel

Hardened SST Material used for seats and balls

• Moderate chemical resistance

• Good abrasion resistance

Kynar® Material used for wetted body parts & seats

• Strong chemical resistance: acids and bases


• High temperature resistance

Polypropylene Material used for air motor, wetted body parts,

seats & balls

• Wide chemical compatibility

• General purpose

• Inexpensive alternative

Stainless Steel Material used for air motor, wetted body parts,

and seats and balls

• High level of corrosion and abrasion resistance

• Passivated for use with waterbase coatings

Buna-N Material used for seats, balls and diaphragms

• Good for petroleum-based fluids

• Not for use with strong solvents or chemicals

• Food grade

Geolast Material used for seats, balls & diaphragms


• Same chemical compatibility as Buna-N and Hytrel

Hytrel Material used for seats, balls & diaphragms


• Often substituted for Buna-N

Santoprene® Material used for seats, balls & diaphragms

• Good abrasion and chemical resistance

• Not for use with solvents

• Often substituted for EPDM or EPR

• Food grade

PTFE Material used for balls & diaphragms

• Excellent when used with solvents

• Poor abrasion resistance

• Widest chemical compatibility with fluids

Viton® Material used for seats, balls & diaphragms

• High level of corrosion resistance with acids

• Resists unleaded fuels

• Food grade

Viton® is a registered trademarks of DuPont.

Santoprene® is a registered trademark of the Monsanto Company.

Kynar® is a registered trademark of Elf Atochem North America, Inc.

All other trademarks mentioned herein are the property of their respective owners.

10

Husky 205 Plastic PumpsAir-Operated Double-Diaphragm


Features • 1/4 in (6.35 mm) end-porting

• Low-cost, compact design

• Spring check valves for superior primingin any mounting configuration

• True-formed PTFE and Santoprene diaphragms for enhanced performance

• External controller for optional remote operation

Typical Applications • Supply pump for OEM applications

• Printing ink supply

• Wastewater chemical supply

• Plating/surface finishing

• Chemical dosing

Typical Fluids Handled• Waterborne materials, some HHC’s

• Paints, coatings, inks and dyes

• Car wash chemicals

• Laundry chemicals and detergents

• Chemicals

• Inks

Husky 205 Groundable Acetal D1102X or D2102X

Husky 205 Polypropylene D1209X or D2209X

Husky 205 Kynar D150AX or D250AX


Husky 205 Plastic Pumps

Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 psi (7 bar, 0.7 MPa)Maximum free flow delivery* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 gpm (18.9 lpm)Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.02 gallon (0.076 liter)Maximum suction lift (D12096) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ft (3 m) dryMaximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.06 in (1.5 mm)Maximum diaphragm operating temperature***

PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°F (104.4°C)Santoprene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180°F (82.2°C)

Typical sound level at 70 psi (4.9 bar, 0.49 MPa) air @ 125 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 dBa

Maximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.0 scfm (0.252 m3/min)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 100 psi

(1.4 to 8.4 bar, 0.14 to 0.84 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npt(f)Air exhaust port size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npt(f)Fluid inlet & outlet size**** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npt(f)Weight

Polypropylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 lb (0.9 kg)Acetal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 lb (1.1 kg)Kynar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.8 lb (1.3 kg)

Wetted parts (in addition to ball, seat and diaphragm materials—which may vary by pump)Polypropylene pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Glass-filled Polypropylene, Santoprene, PTFE, PolypropyleneAcetal pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Acetal with Stainless Steel fibers, PTFE, Acetal, SantopreneKynar pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kynar, PTFE, Santoprene

Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308652* Flow rates are with muffler and do not vary based on diaphragm material

** Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type*** Actual pump performance may be affected by prolonged usage at temperature

**** Hybrid thread allows for either 1/4 npt or 1/4 bspt fitting

System Drawings

Technical Specifications

Husky 205 Wall-Mount with CycleFlo Husky 205 Wall-Mount with Drum Feed




* = BSP plastic in 1/2" (12.7mm) pumps1" > Plastic pumps flange connections3" Aluminum pumps flange connections

1 = 1/4” (6.35 mm) Standard: polypropylene center section 1 = Acetal (npt) 0 = Seat with ball 1 = PTFE 1 = PTFE2 = 1/4” (6.35 mm) Remote: polypropylene center section 2 = Poly (npt) 2 = Acetal 2 = Acetal 5 = Hytrel3 = 3/8” (9.52 mm) Standard: aluminum center section 3 = Aluminum (npt) 3 = Stainless Steel 3 = Stainless Steel 6 = Santoprene5 = 1/2” (12.7 mm) Standard: aluminum center section 4 = Stainless Steel (npt) 4 = Hardened SST 4 = Hardened SST 7 = Buna N4 = 1/2” (12.7 mm) Remote: polypropylene center section 5 = Kynar (npt) 5 = Hytrel 5 = Hytrel 8 = Viton5 = 3/4” (19.05 mm) Standard: polypropylene center section 6 = Ductile Iron (npt) 6 = Santoprene 6 = Santoprene G = Geolast4 = 3/4” (19.05 mm) Remote: polypropylene center section 7 = Buna N 7 = Buna N7 = 1" (25.4 mm) Standard: aluminum center section A = Acetal * (bsp) 8 = Viton 8 = Viton8 = 1" (25.4 mm) Remote: aluminum center section B = Poly * (bsp) 9 = Polypropylene 9 = PolypropyleneR = 1" (25.4 mm) Standard: stainless steel center section C = Aluminum (bsp) A = Kynar A = KynarS = 1" (25.4 mm) Remote: stainless steel center section D = Stainless Steel (bsp) G = Geolast G = GeolastB = 1-1/2" (38.1 mm) Standard: aluminum center section E = Kynar (bsp)C = 1-1/2" (38.1 mm) Remote: aluminum center section F = Ductile Iron (bsp) B = SST with viton sealT = 1-1/2" (38.1 mm) Standard: stainless steel center section C = Santoprene with U = 1-1/2" (38.1 mm) Remote: stainless steel center section H = 2” npt Alum Extended viton sealF = 2" (50.8 mm) Standard: aluminum center section G = 2” bsp Alum ExtendedG = 2" (50.8 mm) Remote: aluminum center sectionV = 2" (50.8 mm) Standard: stainless steel center section S = Food Grade FDAW = 2" (50.8 mm) Remote: stainless steel center sectionK = 3” (76.2 mm) Standard: aluminum center section

The highlighted areas indicate possible configurations for the Husky 205 plastic pump.

6.8 in. (173 mm)

6 in(145 mm)

3.7 in(94 mm)

Dimensions

Ordering Information



Part Number Part Number(NPT Ported)* (BSP Ported)*

Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Material Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Air Kit Control**Acetal D11021 D21021 Acetal Acetal PTFE D01021 238853 246946

D11026 D21026 Acetal Acetal Santoprene D01026 238853 246946

Kynar D150A1 D250A1 Kynar Kynar PTFE D010A1 238853 246946

D250A6 D250A6 Kynar Kynar Santoprene D010A6 238853 246946

Polypropylene D12091 D22091 Polypropylene Polypropylene PTFE D01091 238853 246946

D12096 D22096 Polypropylene Polypropylene Santoprene D01096 238853 246946

* NPT and BSP threads are interchangeable for this size

** Air control includes air regulator and filter with gauge

Popular Models

Performance ChartsSee www.graco.com/process for performance charts.

AccessoriesSee page 86 for additional accessories.

14



Features• 3/8 in (9.52 mm) end-porting

• Fully-groundable acetal model

• Delivery up to 7 gpm (26.5 lpm)

• Operates on as little as 20 psi (1.4 bar, 0.14 MPa) air pressure

• Quiet operation — 75 dBa at 50 psi (3.5 bar, 0.35 MPa) and 60 cpm

Typical Applications• Drum transfer for fluids up to 1000 centipoise

• Circulation of low viscosity inks, stains and dyes

• Coolant circulation and evacuation

• Waste fluid removal

• On-demand batch chemical metering

• Low viscosity adhesive supply

• Consistent low pressure air spray or HVLP supply

Typical Fluids Handled• Paints

• Lubricants

• Inks

• Stains

• Solvents

• Coatings

• Dyes

Husky 307 Groundable Acetal D31XXX

Husky 307 PolypropyleneD32XXX


Husky 307Plastic Pumps

Maximum fluid working pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 psi (7 bar, 0.7 MPa)Maximum free flow delivery* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.0 gpm (26.5 lpm)Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.02 gallon (0.076 liter)Maximum suction lift (D31255) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ft (3.7 m) dryMaximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.06 in (1.5 mm)Maximum operating temperature***

PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°F (104.4°C)Santoprene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180°F (82.2°C)Buna-N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180°F (82.2°C)Hytrel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°F (65.5°C)

Typical sound level at 50 psi (3.5 bar, 0.35 MPa) air @ 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 dBa

Maximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 scfm (0.17 m3/min)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 100 psi

(1.4 to 8.4 bar, 0.14 to 0.84 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npt(f) or bspt(f)Fluid inlet & outlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8 npt(f)Weight

Acetal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 lb (2.4 kg)Polypropylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.75 lb (2.2 kg)

Wetted parts (in addition to ball, seat and diaphragm materials—which may vary by pump)Acetal pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Acetal with Stainless Steel fibers, PTFEPolypropylene pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polypropylene, PTFE

Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308553* Flow rates are with muffler and do not vary based on diaphragm material** Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type*** Actual pump performance may be affected by prolonged usage at temperature

System Drawings


Husky 307 Wall-Mount with Siphon Feed Husky 307 Drum-Mount with Siphon Feed




1 = 1/4” (6.35 mm) Standard: polypropylene center section 1 = Acetal (npt) 0 = Seat with ball 1 = PTFE 1 = PTFE2 = 1/4” (6.35 mm) Remote: polypropylene center section 2 = Poly (npt) 2 = Acetal 2 = Acetal 5 = Hytrel3 = 3/8” (9.52 mm) Standard: aluminum center section 3 = Aluminum (npt) 3 = Stainless Steel 3 = Stainless Steel 6 = Santoprene5 = 1/2” (12.7 mm) Standard: aluminum center section 4 = Stainless Steel (npt) 4 = Hardened SST 4 = Hardened SST 7 = Buna N4 = 1/2” (12.7 mm) Remote: polypropylene center section 5 = Kynar (npt) 5 = Hytrel 5 = Hytrel 8 = Viton5 = 3/4” (19.05 mm) Standard: polypropylene center section 6 = Ductile Iron (npt) 6 = Santoprene 6 = Santoprene G = Geolast4 = 3/4” (19.05 mm) Remote: polypropylene center section 7 = Buna N 7 = Buna N7 = 1" (25.4 mm) Standard: aluminum center section A = Acetal * (bsp) 8 = Viton 8 = Viton8 = 1" (25.4 mm) Remote: aluminum center section B = Poly * (bsp) 9 = Polypropylene 9 = PolypropyleneR = 1" (25.4 mm) Standard: stainless steel center section C = Aluminum (bsp) A = Kynar A = KynarS = 1" (25.4 mm) Remote: stainless steel center section D = Stainless Steel (bsp) G = Geolast G = GeolastB = 1-1/2" (38.1 mm) Standard: aluminum center section E = Kynar (bsp)C = 1-1/2" (38.1 mm) Remote: aluminum center section F = Ductile Iron (bsp) B = SST with viton sealT = 1-1/2" (38.1 mm) Standard: stainless steel center section C = Santoprene with U = 1-1/2" (38.1 mm) Remote: stainless steel center section H = 2 npt Alum Extended viton sealF = 2" (50.8 mm) Standard: aluminum center section G = 2 bsp Alum ExtendedG = 2" (50.8 mm) Remote: aluminum center sectionV = 2" (50.8 mm) Standard: stainless steel center section S = Food Grade FDAW = 2" (50.8 mm) Remote: stainless steel center sectionK = 3” (76.2 mm) Standard: aluminum center section



Dimensions


8.13 in(206.5 mm)

7.24 in(184 mm)

6.18 in(157 mm)

6.3 in (160 mm)

8.12 in (206.5 mm)

11.99 in(304.5 mm)

1/4 npt(f) Air Inlet

3/8 npt(f)Air Exhaust

(muffler included)

4.98 in(126.5 mm)

3.0 in(76 mm)

3.14 in(80 mm)

3.5 in (89 mm)

5.3 in (134.5 mm)

0.66 in(17 mm)

2.53 in(64.5 mm)

3/8 npt(f)Fluid Outlet

3/8 npt(f)Fluid Inlet



Part Number Part Number(NPT Ported) (BSP Ported)

Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Material Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Air Kit Control*Acetal D31211 NA D3A211 NA Acetal PTFE PTFE D03211 239952 246946

D31255 NA D3A255 NA Acetal Hytrel Hytrel D03255 239952 246946

D31277 NA D3A277 NA Acetal Buna Buna D03277 239952 246946

D31311 NA D3A311 NA Stainless Steel PTFE PTFE D03311 239952 246946

D31366 NA D3A366 NA Stainless Steel Santoprene Santoprene D03366 239952 246946

Polypropylene D32211 NA D3B211 NA Acetal PTFE PTFE D03211 239952 246946

D32255 NA D3B255 NA Acetal Hytrel Hytrel D03255 239952 246946

D32277 NA D3B277 NA Acetal Buna Buna D03277 239952 246946

D32311 NA D3B311 NA Stainless Steel PTFE PTFE D03311 239952 246946

D32366 NA D3B366 NA Stainless Steel Santoprene Santoprene D03366 239952 246946

D32911 NA D3B911 NA Polypropylene PTFE PTFE D03911 239952 246946

D32955 NA D3B955 NA Polypropylene Hytrel Hytrel D03955 239952 246946

D32966 NA D3B966 NA Polypropylene Santoprene Santoprene D03966 239952 246946

D32977 NA D3B977 NA Polypropylene Buna Buna D03977 239952 246946

* Air control includes air regulator and filter with gauge

Popular Models



18



Features• 1/2 in (12.7 mm) center-porting and 3/4 in (19.05 mm)

end-porting

• No seals to leak or fail

• Quiet running — less than 85 dBa with easy-to-use remotemuffler capability for even lower noise levels

• High flow rates in a small, portable package


Typical Applications• Machine lubrication servicing

• Drum evacuation

• Plating and dip tanks

• Water treatment

Typical Fluids Handled• Cleaning fluids and detergents

• Chemicals

• Ceramic glazes

• Inks

• Solvents and flammables

• Acids and bases

Husky 515 Groundable Acetal D51XXX or D41XXX

Husky 515 Polypropylene D52XXX or D42XXX

Husky 515 Kynar

D55XXX or D45XXX



Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 psi (7 bar, 0.7 MPa)Maximum free flow delivery* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 gpm (57 lpm)Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.04 gallon (0.15 liter)Maximum suction lift (D52331) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 ft (3.7 m) dryMaximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.09 in (2.5 mm)Maximum operating temperature***

PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°F (104.4°C)Santoprene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180°F (82.2°C)Buna-N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180°F (82.2°C)Hytrel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°F (65.5°C)Viton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250°F (121.1°C)

Typical sound level at 70 psi (4.9 bar, 0.49 MPa) air @ 200 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 dBa

Maximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 scfm (0.672 m3/min)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 to 100 psi

(1.8 to 7 bar, 0.18 to 0.7 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npt(f)Air exhaust port size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8 npt(f)Fluid inlet & outlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 and 3/4 npt(f) or bspt(f)Weight

Acetal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.8 lb (3.5 kg)Polypropylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5 lb (2.9 kg)Kynar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.5 lb (3.9 kg)

Wetted parts (in addition to ball, seat and diaphragm materials—which may vary by pump)Acetal pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Groundable Acetal, PTFEPolypropylene pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polypropylene, PTFEKynar pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kynar, PTFE

Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308981* Flow rates are with muffler and do not vary based on diaphragm material** Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type*** Actual pump performance may be affected by prolonged usage at temperature

System Drawings


Husky 515 Wall-Mount with Drum Feed Husky 515 Drum-Mount with Siphon Feed




1 = 1/4” (6.35 mm) Standard: polypropylene center section 1 = Acetal (npt) 0 = Seat with ball 1 = PTFE 1 = PTFE2 = 1/4” (6.35 mm) Remote: polypropylene center section 2 = Poly (npt) 2 = Acetal 2 = Acetal 5 = Hytrel3 = 3/8” (9.52 mm) Standard: aluminum center section 3 = Aluminum (npt) 3 = Stainless Steel 3 = Stainless Steel 6 = Santoprene5 = 1/2” (12.7 mm) Standard: aluminum center section 4 = Stainless Steel (npt) 4 = Hardened SST 4 = Hardened SST 7 = Buna N4 = 1/2” (12.7 mm) Remote: polypropylene center section 5 = Kynar (npt) 5 = Hytrel 5 = Hytrel 8 = Viton5 = 3/4” (19.05 mm) Standard: polypropylene center section 6 = Ductile Iron (npt) 6 = Santoprene 6 = Santoprene G = Geolast4 = 3/4” (19.05 mm) Remote: polypropylene center section 7 = Buna N 7 = Buna N7 = 1" (25.4 mm) Standard: aluminum center section A = Acetal * (bsp) 8 = Viton 8 = Viton8 = 1" (25.4 mm) Remote: aluminum center section B = Poly * (bsp) 9 = Polypropylene 9 = PolypropyleneR = 1" (25.4 mm) Standard: stainless steel center section C = Aluminum (bsp) A = Kynar A = KynarS = 1" (25.4 mm) Remote: stainless steel center section D = Stainless Steel (bsp) G = Geolast G = GeolastB = 1-1/2" (38.1 mm) Standard: aluminum center section E = Kynar (bsp)C = 1-1/2" (38.1 mm) Remote: aluminum center section F = Ductile Iron (bsp) B = SST with viton sealT = 1-1/2" (38.1 mm) Standard: stainless steel center section C = Santoprene with U = 1-1/2" (38.1 mm) Remote: stainless steel center section H = 2 npt Alum Extended viton sealF = 2" (50.8 mm) Standard: aluminum center section G = 2 bsp Alum ExtendedG = 2" (50.8 mm) Remote: aluminum center section D = Urethane DuckbillV = 2" (50.8 mm) Standard: stainless steel center section S = Food Grade FDAW = 2" (50.8 mm) Remote: stainless steel center sectionK = 3” (76.2 mm) Standard: aluminum center section



Dimensions


7.75 in.(196.9 mm)

1/2 npt(f) or bspt(f) Fluid Inlet 3/4 npt(f) or bspt(f) Fluid Inlet

6.12 in.(155.4 mm)

8.56 in.(217.4 mm)

9.94 in.(252.5 mm)

10.63 in.(270 mm)

4.70 in.(119 mm)

5.01 in.(127 mm)

1/2 npt(f) or bspt(f)Fluid Outle t

1/4 npt(f) Air Inlet

3/4 npt(f) orbsp(f)

Fluid Inlet

3/4 npt(f) or bsp(f)Fluid Outle t

3.13 in.(79.5 mm)

4.30 in.(109.1 mm)

6.25 in.(158.8 mm)



Popular Models


Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Material Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Air Kit Control*Acetal D51211 D41211 D5A211 D4A211 Acetal PTFE PTFE D05211 241657 246946

D51255 D41255 D5A255 D4A255 Acetal Hytrel Hytrel D05255 241657 246946

D51277 D41277 D5A277 D4A277 Acetal Buna Buna D05277 241657 246946

D51311 D41311 D5A311 D4A311 Stainless Steel PTFE PTFE D05311 241657 246946

D51331 D41331 D5A331 D4A331 Stainless Steel Stainless Steel PTFE D05331 241657 246946

D51D05 D41D05 D5AD05 D4AD05 Duckbill Hytrel D05D05 241657 246946

D51D06 D41D06 D5AD06 D4AD06 Duckbill Santoprene D05D06 241657 246946

D51D07 D41D07 D5AD07 D4AD07 Duckbill Buna D05D07 241657 246946

Polypropylene D52211 D42211 D5B211 D4B211 Acetal PTFE PTFE D05211 241657 246946

D52277 D42277 D5B277 D4B277 Acetal Buna Buna D05277 241657 246946

D52311 D42311 D5B311 D4B311 Stainless Steel PTFE PTFE D05311 241657 246946

D52331 D42331 D5B331 D4B331 Stainless Steel Stainless Steel PTFE D05331 241657 246946

D52336 D42336 D5B336 D4B336 Stainless Steel Stainless Steel Santoprene D05336 241657 246946

D52911 D42911 D5B911 D4B911 Polypropylene PTFE PTFE D05911 241657 246946

D52955 D42955 D5B955 D4B955 Polypropylene Hytrel Hytrel D05955 241657 246946

D52966 D42966 D5B966 D4B966 Polypropylene Santoprene Santoprene D05966 241657 246946

D52977 D42977 D5B977 D4B977 Polypropylene Buna Buna D05977 241657 246946

D52988 D42988 D5B988 D4B988 Polypropylene Viton Viton D05988 241657 246946

D52D05 D42D05 D5BD05 D4BD05 Duckbill Hytrel D05D05 241657 246946

D52D06 D42D06 D5BD06 D4BD06 Duckbill Santoprene D05D06 241657 246946

D52D07 D42D07 D5BD07 D4BD07 Duckbill Buna D05D07 241657 246946

Kynar D55A11 D45A11 D5EA11 D4EA11 Kynar PTFE PTFE D05A11 241657 246946

D55A88 D45A88 D5EA88 D4EA88 Kynar Viton Viton D05A88 241657 246946




22

Husky 716 Metal PumpsAir-Operated Double-Diaphragm


Features• 3/4 in (19.05 mm) center- and end-porting

• No seals to leak or fail

• Quiet running — less than 85 dBa with easy-to-use remotemuffler capability for even lower noise levels

• High flow rates in a small, portable package


Typical Applications• Machine lubrication servicing

• Cleaning fluids and detergents

• Plating and dip tanks

• Water treatment

Typical Fluids Handled• Oil

• Water

• Most solvents

Husky 716 Aluminum D53XXX or D43XXX

Husky 716 Stainless Steel D54XXX or D44XXX


Husky 716Metal Pumps

Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 psi (7 bar, 0.7 MPa)Maximum free flow delivery* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 gpm (61 lpm)Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.04 gallon (0.15 liter)Maximum suction lift (D53331) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 ft (3.4 m) dryMaximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.09 in (2.5 mm)Maximum operating temperature***

PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°F (104.4°C)Santoprene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180°F (82.2°C)Buna-N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180°F (82.2°C)Hytrel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°F (65.5°C)Viton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250°F (121.1°C)

Typical sound level at 70 psi air (4.9 bar, 0.49 MPa) air @ 200 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 dBa

Maximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 scfm (0.672 m3/min)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 to 100 psi

(1.8 to 7 bar, 0.18 to 0.7 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npt(f)Air exhaust port size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8 npt(f)Fluid inlet & outlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4 npt(f) or bspt(f)Weight

Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.5 lb (3.9 kg)Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 lb (8.2 kg)

Wetted parts (in addition to ball, seat and diaphragm materials—which may vary by pump)Aluminum pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum, Stainless Steel, PTFE,

Zinc-Plated Steel Stainless Steel pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polypropylene, Stainless Steel, Polyester,

Nickel-Plated Brass, Epoxy-Coated SteelInstruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308981* Flow rates are with muffler and do not vary based on diaphragm material** Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type*** Actual pump performance may be affected by prolonged usage at temperature

System Drawings


Husky 716 Wall-Mount with Drum Feed Husky 716 Drum-Mount with Siphon Feed



** = BSP plastic in 1/2" (12.7mm) pumps1" > Plastic pumps flange connections3" Aluminum pumps flange connections

1 = 1/4” (6.35 mm) Standard: polypropylene center section 1 = Acetal (npt) 0 = Seat with ball 1 = PTFE 1 = PTFE2 = 1/4” (6.35 mm) Remote: polypropylene center section 2 = Poly (npt) 2 = Acetal 2 = Acetal 5 = Hytrel3 = 3/8” (9.52 mm) Standard: aluminum center section 3 = Aluminum (npt) 3 = Stainless Steel 3 = Stainless Steel 6 = Santoprene5 = 1/2” (12.7 mm) Standard: aluminum center section 4 = Stainless Steel (npt) 4 = Hardened SST 4 = Hardened SST 7 = Buna N4 = 1/2” (12.7 mm) Remote: polypropylene center section 5 = Kynar (npt) 5 = Hytrel 5 = Hytrel 8 = Viton5 = 3/4” (19.05 mm) Standard: polypropylene center section 6 = Ductile Iron (npt) 6 = Santoprene 6 = Santoprene G = Geolast4 = 3/4” (19.05 mm) Remote: polypropylene center section 7 = Buna N 7 = Buna N7 = 1" (25.4 mm) Standard: aluminum center section A = Acetal ** (bsp) 8 = Viton 8 = Viton8 = 1" (25.4 mm) Remote: aluminum center section B = Poly ** (bsp) 9 = Polypropylene 9 = PolypropyleneR = 1" (25.4 mm) Standard: stainless steel center section C = Aluminum (bsp) A = Kynar A = KynarS = 1" (25.4 mm) Remote: stainless steel center section D = Stainless Steel (bsp) G = Geolast G = GeolastB = 1-1/2" (38.1 mm) Standard: aluminum center section E = Kynar (bsp)C = 1-1/2" (38.1 mm) Remote: aluminum center section F = Ductile Iron (bsp) B = SST with viton sealT = 1-1/2" (38.1 mm) Standard: stainless steel center section C = Santoprene with U = 1-1/2" (38.1 mm) Remote: stainless steel center section H = 2 npt Alum Extended viton sealF = 2" (50.8 mm) Standard: aluminum center section G = 2 bsp Alum ExtendedG = 2" (50.8 mm) Remote: aluminum center section D = Urethane DuckbillV = 2" (50.8 mm) Standard: stainless steel center section S = Food Grade FDAW = 2" (50.8 mm) Remote: stainless steel center sectionK = 3” (76.2 mm) Standard: aluminum center section

The highlighted areas indicate possible configurations for the Husky 716 metal pumps.


Dimensions


7.37 in.(187.2 mm)

3/4 npt(f) or bspt(f) Fluid Inlets

6.62 in.(168.1 mm)

7.80 in.(198.1 mm)

9.18 in.(233.2 mm)

10.43 in.(264.9 mm)

4.25 in.(108.0 mm)

4.44 in.(112.8 mm)

3/4 npt(f) or bspt(f) Fluid Outle t

1/4 npt(f)Air Inlet

3/4 npt(f)or bsp(f)

FluidOutlets

4.29 in.(109.0 mm)

6.04 in.(153.4 mm)

3/4 npt(f)or bsp(f)

Fluid Inlets

2.76 in.(62.5 mm)



Popular Models


Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Material Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Air Kit Control*Aluminum D53211 D43211 D5C211 D4C211 Acetal PTFE PTFE D05211 241657 246946

D53255 D43255 D5C255 D4C255 Acetal Hytrel Hytrel D05255 241657 246946

D53277 D43277 D5C277 D4C277 Acetal Buna Buna D05277 241657 246946

D53288 D43288 D5C288 D4C288 Acetal Viton Viton D05288 241657 246946

D53311 D43311 D5C311 D4C311 Stainless Steel PTFE PTFE D05311 241657 246946

D53331 D43331 D5C331 D4C331 Stainless Steel Stainless Steel PTFE D05331 241657 246946

D53355 D43355 D5C355 D4C355 Stainless Steel Hytrel Hytrel D05355 241657 246946

D53366 D43366 D5C366 D4C366 Stainless Steel Santoprene Santoprene D05366 241657 246946

D53377 D43377 D5C377 D4C377 Stainless Steel Buna Buna D05377 241657 246946

D53388 D43388 D5C388 D4C388 Stainless Steel Viton Viton D05388 241657 246946

D53911 D43911 D5C911 D4C911 Polypropylene Polypropylene Polypropylene D05911 241657 246946

D53955 D43955 D5C955 D4C955 Polypropylene Hytrel Hytrel D05955 241657 246946

D53966 D43966 D5C966 D4C966 Polypropylene Santoprene Santoprene D05966 241657 246946

D53977 D43977 D5C977 D4C977 Polypropylene Buna Buna D05977 241657 246946

D53D05 D43D05 D5CD05 D4CD05 Duckbill Hytrel D05D05 241657 246946

D53D06 D43D06 D5CD06 D4CD06 Duckbill Santoprene D05D06 241657 246946

D53D07 D43D07 D5CD07 D4CD07 Duckbill Buna D05D07 241657 246946

Stainless Steel D54211 D44211 D5D211 D4D211 Acetal PTFE PTFE D05211 241657 246946

D54311 D44311 D5D311 D4D311 Stainless Steel PTFE PTFE D05311 241657 246946

D54331 D44331 D5D331 D4D331 Stainless Steel Stainless Steel PTFE D05331 241657 246946

D54335 D44335 D5D335 D4D335 Stainless Steel Stainless Steel Hytrel D05335 241657 246946

D54336 D44336 D5D336 D4D336 Stainless Steel Stainless Steel Santoprene D05336 241657 246946

D54355 D44355 D5D355 D4D355 Stainless Steel Hytrel Hytrel D05355 241657 246946

D54366 D44366 D5D366 D4D366 Stainless Steel Santoprene Santoprene D05366 241657 246946

D54377 D44377 D5D377 D4D377 Stainless Steel Buna Buna D05377 241657 246946

D54388 D44388 D5D388 D4D388 Stainless Steel Viton Viton D05388 241657 246946

D54911 D44911 D5D911 D4D911 Polypropylene PTFE PTFE D05911 241657 246946

D54966 D44966 D5D966 D4D966 Polypropylene Santoprene Santoprene D05966 241657 246946




26



Features• 1 in (25.4 mm) ANSI end-porting

• High flow – 40 gpm (151 lpm) in a compact, portable size

• Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)

• Epoxy-coated center section


• Stainless steel center section for corrosive applications

Typical Applications• Drum fluid transfer

• Unloading fluids

• Transferring high temperature acids

• Chemical evacuation

• Tank and sump drainage

• Circulating plating chemical tank

Typical Fluids Handled• Chemicals

• Acetic acid

• Chromic acid

• Hydrochloric acid

• Hydrofluoric acid

• Sulfuric acid

• Nitric acid

• Phosphoric acid

Husky 1040 Polypropylene D72XXX or D82XXX

Husky 1040 Kynar D75XXX or D85XXX

Husky 1040 Polypropylene DR2XXX or DS2XXX

Husky 1040 Kynar DR5XXX or DS5XXX

Husky 1040 Groundable Acetal D71XXX or D81XXX



Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.4 bar, 0.84 MPa)Maximum free flow delivery* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 gpm (151 lpm)Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.15 gallon (0.57 liter)Maximum suction lift (D72888) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 ft (5.8 m) dryMaximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.13 in (3.2 mm)Maximum operating temperature***

PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°F (104.4°C)Santoprene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180°F (82.2°C)Buna-N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180°F (82.2°C)Hytrel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°F (65.5°C)Viton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250°F (121.1°C)Geolast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°F (65.5°C)

Typical sound level at 70 psi air (4.9 bar, 0.49 MPa) air @ 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 dBa

Maximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 scfm (1.7 m3/min)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 120 psi

(1.4 to 8.4 bar, 0.14 to 0.84 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)Fluid inlet & outlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 in (25.4 mm) ANSI-flangeWeight

Acetal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 lb (10 kg)Polypropylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 lb (8.6 kg)Polypropylene with stainless steel center section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30.9 lb (14 kg)Kynar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 lb (11.3 kg)Kynar with stainless steel center section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36.9 lb (16.7 kg)

Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .308443* Flow rates are with muffler and do not vary based on diaphragm material** Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type*** Actual pump performance may be affected by prolonged usage at temperature

System Drawing


Husky 1040 Above Ground Gravity Feed





The highlighted areas indicate possible configurations for the Husky 1040 plastic pumps.


Dimensions


13.5 in.(343 mm)

Air Inlet:1/2 npt(f)

9.8 in.(249 mm)

5.5 in.(139.5 mm)Air Exhaust

(muffler included):3/4 npt(f)

12.25 in.(311 mm)

16.88 in.(4.285 mm)

0.375 in.(9.5 mm)

2.5 in.(63.5 mm)

7.57 in.(192 mm)

14.75 in.(374.5 mm)

3.95 in.(100 mm)

Eight Slots:0.62 in. (16 mm)

45

2.5 in.(235 mm)

5.0 in.(127 mm)

Port D iameter:1.15 in. (29 mm)

Fl uid Inlet(ANSI Flange)

Fl uid Outlet (ANSI Flange)



Popular Models

Part Number Part Number(ANSI-Flange) (BSP Ported)

Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Material Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Air Kit Control*Standard Pumps with Aluminum Center SectionAcetal D71211 D81211 Acetal PTFE PTFE D08211 236273 246947

D712GG Acetal Geolast Geolast D082GG 236273 246947D71311 D71311 Stainless Steel PTFE PTFE D08311 236273 246947D71331 Stainless Steel Stainless Steel PTFE D08331 236273 246947

Polypropylene D72311 D82311 Stainless Steel PTFE PTFE D08311 236273 246947D72331 Stainless Steel Stainless Steel PTFE D08331 236273 246947D72366 Stainless Steel Santoprene Santoprene D08366 236273 246947D72377 D72377 Stainless Steel Buna Buna D08377 236273 246947D72777 D82777 Buna Buna Buna D08777 236273 246947D72888 D82888 Viton Viton Viton D08888 236273 246947D72911 D82911 Polypropylene PTFE PTFE D08911 236273 246947D72955 Polypropylene Hytrel Hytrel D08955 236273 246947D72966 D82966 Polypropylene Santoprene Santoprene D08966 236273 246947D72977 Polypropylene Buna Buna D08977 236273 246947D72988 Polypropylene Viton Viton D08988 236273 246947D72A11 Kynar PTFE PTFE D08A11 236273 246947

Kynar D75311 Stainless Steel PTFE PTFE D08311 236273 246947D75811 D85811 Viton PTFE PTFE D08811 236273 246947D75888 D85888 Viton Viton Viton D08888 236273 246947D75A11 D85A11 Kynar PTFE PTFE D08A11 236273 246947D75A88 Kynar Viton Viton D08A88 236273 246947

Corrosion Resistant Pumps with Stainless Steel Center SectionsPolypropylene DR2311 DS2311 Stainless Steel PTFE PTFE D08311 236273 246947

DR2331 DS2331 Stainless Steel Stainless Steel PTFE D08331 236273 246947DR2377 DS2377 Stainless Steel Buna Buna D08377 236273 246947DR2777 DS2777 Buna Buna Buna D08777 236273 246947DR2888 DS2888 Viton Viton Viton D08888 236273 246947DR2911 DS2911 Polypropylene PTFE PTFE D08911 236273 246947DR2977 DS2977 Polypropylene Buna Buna D08977 236273 246947DR2988 DS2988 Polypropylene Viton Viton D08988 236273 246947DR2A11 DS2A11 Kynar PTFE PTFE D08A11 236273 246947

Kynar DR5311 DS5311 Stainless Steel PTFE PTFE D08311 236273 246947DR5811 DS5811 Viton PTFE PTFE D08811 236273 246947DR5888 DS5888 Viton Viton Viton D08888 236273 246947DR5A11 DS5A11 Kynar PTFE PTFE D08A11 236273 246947DR5A88 DS5A88 Kynar Viton Viton D08A88 236273 246947




30



Husky 1040 Aluminum D73XXX or D83XXX

Husky 1040 Stainless Steel D74XXX or D84XXX

Husky 1040 Stainless Steel DR4XXX or DS4XXX

Features • 1 in (25.4 mm) center- and end-porting



• Epoxy-coated center section for corrosive environments

• Equipped with an effective and reliable air valve system




• Unloading fluids


• Ceramic glaze supply

• Dewatering and sump evacuation

• Tank and sump drainage


• Contaminated surface water

• Adhesives, varnishes, dispersions, solvents and stains

• Resins, latexes, wood preservative stains, concrete paints and primers

• Ceramic slips and slurries



Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.4 bar, 0.84 MPa)Maximum free flow delivery* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 gpm (151 lpm)Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.15 gallon (0.57 liter)Maximum suction lift (D73888) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 ft (5.8 m) dryMaximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.13 in (3.2 mm)Maximum operating temperature***


Typical sound level at 70 psi air (0.49 bar, 4.9 MPa) air @ 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 dBaMaximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 scfm (1.7 m3/min)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 120 psi

(1.4 to 8.4 bar, 0.14 to 0.84 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)Fluid inlet & outlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 npt(f) or bspt(f)Weight

Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 lb (8.2 kg)Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 lb (15 kg)Stainless Steel with stainless steel center section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 lb (22 kg)


System Drawing





Dimensions

12 in.(305 mm)

6.0 in.(152 mm)

OptionalF luid

Outlet:1 npt(f )

9.1 in.(231.1 mm)

OptionalFl uid Inlet:

1 npt(f )

5.5 in.(139.5 mm)

AirExhaust(muffler

included):3/4 npt(f )

12.28 in.(312 mm)

12.28 in.(337.5 mm)

14.0 in.(355.5 mm)

1.0 in.(25.5 mm)

0.125 in.(3 mm)

Air Inlet:1/2 npt(f )

5 in(127 mm)

9.2 in235 mm








Popular Models


Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Material Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Air Kit Control*Standard Pumps with Aluminum Center SectionAluminum D73211 D7C211 Acetal PTFE PTFE D07211 236273 246947

D73221 D7C221 Acetal Acetal PTFE D07221 236273 246947D73277 D7C277 Acetal Buna Buna D07277 236273 246947D73311 D83311 D7C311 D8C311 Stainless Steel PTFE PTFE D07311 236273 246947D73331 D83331 D7C331 D8C331 Stainless Steel Stainless Steel PTFE D07331 236273 246947D73366 D83366 D7C366 D8C366 Stainless Steel Santoprene Santoprene D07366 236273 246947D73377 D7C377 Stainless Steel Buna Buna D07377 236273 246947D73525 D7C525 Hytrel Acetal Hytrel D07525 236273 246947D73555 D7C555 Hytrel Hytrel Hytrel D07555 236273 246947D73577 D7C577 Hytrel Buna Buna D07577 236273 246947D73666 D83666 D7C666 D8C666 Santoprene Santoprene Santoprene D07666 236273 246947D73777 D83777 D7C777 D8C777 Buna Buna Buna D07777 236273 246947D73888 D7C888 Viton Viton Viton D07888 236273 246947D73GGG D83GGG D7CGGG D8CGGG Geolast Geolast Geolast D07GGG 236273 246947D73911 D7C911 Polypropylene PTFE PTFE D07911 236273 246947D73977 D7C977 Polypropylene Buna Buna D07977 236273 246947

Stainless Steel D74211 D7D211 Acetal PTFE PTFE D07211 236273 246947D74311 D84311 D7D311 D8D311 Stainless Steel PTFE PTFE D07311 236273 246947D74331 D84331 D7D331 D8D331 Stainless Steel Stainless Steel PTFE D07331 236273 246947D74336 D7D336 Stainless Steel Stainless Steel Santoprene D07336 236273 246947D74366 D7D366 Stainless Steel Santoprene Santoprene D07366 236273 246947D74377 D84377 D7D377 D8D377 Stainless Steel Buna Buna D07377 236273 246947D74525 D7D525 Hytrel Acetal Hytrel D07525 236273 246947D74666 D84666 D7D666 D8D666 Santoprene Santoprene Santoprene D07666 236273 246947D74777 D84777 D7D777 D8D777 Buna Buna Buna D07777 236273 246947D74888 D7D888 Viton Viton Viton D07888 236273 246947D74GGG D84GGG D7DGGG D8DGGG Geolast Geolast Geolast D07GGG 236273 246947D74911 D7D911 Polypropylene PTFE PTFE D07911 236273 246947

Corrosion Resistant Pumps with Stainless Steel Center SectionStainless Steel DR4311 DS4311 DRD311 DSD311 Stainless Steel PTFE PTFE D07311 236273 246947

DR4366 DRD366 Stainless Steel Santoprene Santoprene D07366 236273 246947DR4377 DS4377 DRD377 DSD377 Stainless Steel Buna Buna D07377 236273 246947DR4388 DS4388 DRD388 DSD388 Stainless Steel Viton Viton D07388 236273 246947DR4666 DS4666 DRD666 DSD666 Santoprene Santoprene Santoprene D07666 236273 246947DR4888 DRD888 Viton Viton Viton D07888 236273 246947DR4911 DRD911 Polypropylene PTFE PTFE D07911 236273 246947DR4A88 DS4A88 DRDA88 DSDA88 Stainless Steel Kynar Viton D07A88 236273 246947

* Air control includes air regulator and filter with gaugeFor UL pumps, see page 89 for part numbers



34



Features• 1-1/2 in (38.1 mm) ANSI end-porting



• Patented, high-reliability closed center air valve is online serviceable

• Lube-free operation

• Epoxy-coated air section



Typical Applications• Tank transfer

• Tank stripping

• Chemical tank plating

• Transferring high temperature acids and gases


• Corrosive fluids

• Acids and gases: acetic, chromic, hydrochloric, hydrofluoric,sulfuric, nitric and phosphoric

Husky 1590 Polypropylene DB2XXX or DC2XXX

Husky 1590 Kynar DB5XXX or DC5XXX

Husky 1590 Polypropylene DT2XXX or DU2XXX

Husky 1590 Kynar DT5XXX or DU5XXX



Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.4 bar, 0.84 MPa)Maximum free flow delivery* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 gpm (378.5 lpm)Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 gallon (1.96 liter)Maximum suction lift (DB2366) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 ft (6.1 m) dryMaximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.19 in (4.8 mm)Maximum operating temperature***


Typical sound level at 70 psi air (4.9 bar, 0.49 MPa) air @ 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 dBaMaximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 scfm (3.5 m3/min.)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 120 psi

(1.4 to 8.4 bar, 0.14 to 0.84 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)Fluid inlet & outlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1/2 in (38.1 mm)

ANSI-flangeWeight

Polypropylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 lb (16 kg)Polypropylene with stainless steel center section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48.3 lb (21.9 kg)Kynar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 lb (22 kg)Kynar with stainless steel center section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62.3 lb (28.2 kg)


System Drawings





Dimensions






21.75 in.(552.5 mm)

19.25 in.(489 mm)

16.25 in.(412.5 mm)

6.0 in. (152.5 mm)

17.55 in. (445.5 mm)

11.99 in.(304.5 mm)

1/2 npt(f)Air Inlet


(muffler included)

10 in.(254 mm)

3.0 in.(76 mm)

7.55 in. (191.77 mm)

6.0 in. (152.5 mm)

10.45 in. (265.5 mm)

0.5 in.(13 mm)

Outlet Port ID:1.75 in. (44.5 mm)

FlangeDiameter :

5 in. (127 mm)

Eight Slots: 0.63 in. (16 mm)

Inlet Port ID:1.6 in.

(40.6 mm)



Popular Models


Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Material Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Air Kit Control*Standard Pumps with Aluminum Center SectionPolypropylene DB2311 Stainless Steel PTFE PTFE D0C311 236273 246947

DB2377 DC2377 Stainless Steel Buna Buna D0C377 236273 246947DB2777 DC2777 Buna Buna Buna D0C777 236273 246947DB2888 DC2888 Viton Viton Viton D0C888 236273 246947DB2911 DC2911 Polypropylene PTFE PTFE D0C911 236273 246947DB2955 Polypropylene Hytrel Hytrel D0C955 236273 246947DB2966 Polypropylene Santoprene Santoprene D0C966 236273 246947DB2977 Polypropylene Buna Buna D0C977 236273 246947DB2988 Polypropylene Viton Viton D0C988 236273 246947DB29GG DC29GG Polypropylene Geolast Geolast D0C9GG 236273 246947

Kynar DB5311 Stainless Steel PTFE PTFE D0C311 236273 246947DB5666 Santoprene Santoprene Santoprene D0C666 236273 246947DB5811 D85811 Viton PTFE PTFE D0C811 236273 246947DB5888 D85888 Viton Viton Viton D0C888 236273 246947DB5A11 D85A11 Kynar PTFE PTFE D0CA11 236273 246947DB5A88 Kynar Viton Viton D0CA88 236273 246947

Corrosion Resistant Pumps with Stainless Steel Center SectionPolypropylene DT2311 DU2311 Stainless Steel PTFE PTFE D0C311 236273 246947

DT2341 DU2331 Hardened SST Stainless Steel PTFE D0C331 236273 246947DT2377 DU2377 Stainless Steel Buna Buna D0C377 236273 246947DT2777 DU2777 Buna Buna Buna D0C777 236273 246947DT2888 DU2888 Viton Viton Viton D0C888 236273 246947DT2911 DU2911 Polypropylene PTFE PTFE D0C911 236273 246947DT2977 DU2977 Polypropylene Buna Buna D0C977 236273 246947DT2988 DU2988 Polypropylene Viton Viton D0C988 236273 246947

Kynar DT5311 DU5311 Stainless Steel PTFE PTFE D0C311 236273 246947DT5811 DU5811 Viton PTFE PTFE D0C811 236273 246947DT5888 DU5888 Viton Viton Viton D0C888 236273 246947DT5A11 DU5A11 Kynar PTFE PTFE D0CA11 236273 246947DT5A88 DU5A11 Kynar Viton Viton D0CA88 236273 246947




38



Features• 1-1/2 in (38.1 mm) ANSI end-porting








Typical Applications• Filter press

• Tank stripping

• Bilge pumping

• Sand and ball mill pumping

• Oil transfer and oil skimming

• Chemical plating

Typical Fluids Handled• Latex

• Abrasive fluids

• Slurries: petroleum, lime, clay, ferrite, salt/brine and pumice

• Sludge: secondary and clarifier

• Pottery slip

Husky 1590 Aluminum DB3XXX or DC3XXX

Husky 1590 Stainless Steel DB4XXX or DC4XXX

Husky 1590 Stainless Steel DT4XXX or DU4XXX


Husky 1590 Metal Pumps

Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.4 bar, 0.84 MPa)Maximum free flow delivery* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 gpm (378.5 lpm)Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 gallon (1.96 liter)Maximum suction lift (DB3366) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 ft. (6.1 m) dryMaximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.19 in. (4.8 mm)Maximum operating temperature***


Typical sound level at 70 psi air (4.9 bar, 0.49 MPa) air @ 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 dBaMaximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 scfm (3.5 m3/min)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 120 psi

(1.4 to 8.4 bar, 0.14 to 0.84 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)Fluid inlet & outlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1/2 npt(f) or bspt(f)Weight

Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.5 lb (15.2 kg)Stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85.5 lb (38.6 kg)Stainless steel with stainless steel center section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98.8 lb (44.8 kg)


System Drawing





Dimensions






19.0 in.(482.5 mm)

17.75 in.(489 mm)

16.25 in.(412.5 mm)

6.0 in. (152.5 mm)

14.94 in. (379.5 mm)

10.55 in.(268 mm)

1/2 npt(f)Air Inlet


(muffler included)

7.75 in.(197 mm)

3.0 in.(76 mm)

7.19 in.(182.6 mm)

6.0 in. (152.5 mm)

10.46 in. (265.5 mm)

0.45 in.(11.5 mm)

Outlet Port ID:1.5 npt(f)

Inlet Port ID:1.5 npt(f)



Popular Models


Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Material Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Air Kit Control*Standard Pumps with Aluminum Center SectionAluminum DB3311 DC3311 DBC311 DCC311 Stainless Steel PTFE PTFE D0B311 236273 246947

DB3341 DBC341 Hardened SST Stainless Steel PTFE D0B331 236273 246947DB3366 DC3366 DBC366 DCC366 Stainless Steel Santoprene Santoprene D0B366 236273 246947DB3377 DC3377 DBC377 DCC377 Stainless Steel Buna Buna D0B377 236273 246947DB3525 DC3525 DBC525 DCC525 Hytrel Acetal Hytrel D0B525 236273 246947DB3555 DBC555 Hytrel Hytrel Hytrel D0B555 236273 246947DB3666 DC3666 DBC666 DCC666 Santoprene Santoprene Santoprene D0B666 236273 246947DB3777 DC3777 DBC777 DCC777 Buna Buna Buna D0B777 236273 246947DB3888 DC3888 DBC888 DCC888 Viton Viton Viton D0B888 236273 246947DB3GGG DC3GGG DBCGGG DCCGGG Geolast Geolast Geolast D0BGGG 236273 246947DB3911 DBC911 Polypropylene PTFE PTFE D0B911 236273 246947DB3977 DBC977 Polypropylene Buna Buna D0B977 236273 246947

Stainless Steel DB4311 DC4311 DBD311 DCD311 Stainless Steel PTFE PTFE D0B311 236273 246947DB4341 DBD341 Hardened SST Stainless Steel PTFE D0B331 236273 246947DB4377 DC4377 DBD377 DCD377 Stainless Steel Buna Buna D0B377 236273 246947DB4525 DBD525 Hytrel Acetal Hytrel D0B525 236273 246947DB4666 DC4666 DBD666 DCD666 Santoprene Santoprene Santoprene D0B666 236273 246947DB4777 DC4777 DBD777 DCD777 Buna Buna Buna D0B777 236273 246947DB4888 DC4888 DBD888 DCD888 Viton Viton Viton D0B888 236273 246947DB4GGG DC4GGG DBDGGG DCDGGG Geolast Geolast Geolast D0BGGG 236273 246947DB4911 DBD911 Polypropylene PTFE PTFE D0B911 236273 246947

Corrosion Resistant Pumps with Stainless Steel Center SectionStainless Steel DT4311 DU4311 DTD311 DUD311 Stainless Steel PTFE PTFE D0B311 236273 246947

DT4377 DU4377 DTD377 DUD377 Stainless Steel Buna Buna D0B377 236273 246947DT4388 DU4388 DTD388 DUD388 Stainless Steel Viton Viton D0B388 236273 246947DT4666 DU4666 DTD666 DUD666 Santoprene Santoprene Santoprene D0B666 236273 246947DT4888 DU4888 DTD888 DUD888 Viton Viton Viton D0B888 236273 246947DT4911 DU4911 DTD911 DUD911 Polypropylene PTFE PTFE D0B911 236273 246947




42




• Larger ports for more flow — up to 150 gpm (568 lpm)

• Fluid pressure up to 120 psi (8.4 bar, 0.84 MPa)







• Bulk fluid supply


• Ground water and sump evacuation


• Tank and bilge drainage

• Slurry and sludge transfer

• Filter press feed

Typical Fluids Handled• Acids and gases: acetic, chromic, hydrochloric, Hydrofluoric,

sulfuric, nitric and phosphoric

• Ship cleaning and stripping chemicals

Husky 2150 Polypropylene DF2XXX or DG2XXX

Husky 2150 Kynar DF5XXX or DG5XXX

Husky 2150 Polypropylene DV2XXX or DW2XXX

Husky 2150 Kynar DV5XXX or DW5XXX



Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.4 bar, 0.84 MPa)Maximum free flow delivery* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 gpm (568 lpm)Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.03 gallon (3.90 liter)Maximum suction lift (DF2666) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 ft (6.1m) dryMaximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 in (6.3 mm)Maximum operating temperature***


Typical sound level at 70 psi air (4.9 bar, 0.49 MPa) air @ 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 dBaMaximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 scfm (4.9 m3/min)Air consumption at 70 psi/60 gpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 scfm (1.7 m3/min)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 120 psi

(1.4 to 8.4 bar, 0.14 to 0.84 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)Fluid inlet & outlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 in (51 mm) ANSI-flangeWeight

Polypropylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 lb (22 kg)Polypropylene with stainless steel center section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68.5 lb (31 kg)Kynar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 lb (30.8 kg)Kynar with stainless steel center section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 lb (39.6 kg)


System Drawing





Dimensions






25.75 in.(654 mm)

22.75 in.(578 mm)

19.25 in.(489 mm)

6.0 in. (152.5 mm)

19.74 in. (501.5 mm)

13.3 in.(350.5 mm)

1/2 npt(f)Air Inlet


(muffler included)

11 in.(280.5 mm)

3.5 in.(89 mm)

8.69 in.(220.5 mm)

6.0 in. (152.5 mm)

12.5 in. (317.5 mm)

0.5 in.(13 mm)

Port Diameter:2.20 in. (56 mm)

Flange Diameter:6 in. (152.5 mm)Eight Slots:

0.75 in. (19 mm)



Popular Models


Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Material Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Air Kit Control*Standard Pumps with Aluminum Center SectionPolypropylene DF2311 Stainless Steel PTFE PTFE D0G311 236273 246947

DF2377 DC2377 Stainless Steel Buna Buna D0G377 236273 246947DF2777 DC2777 Buna Buna Buna D0G777 236273 246947DF2888 DC2888 Viton Viton Viton D0G888 236273 246947DF2911 DC2911 Polypropylene PTFE PTFE D0G911 236273 246947DF2955 Polypropylene Hytrel Hytrel D0G955 236273 246947DF2966 Polypropylene Santoprene Santoprene D0G966 236273 246947DF2977 Polypropylene Buna Buna D0G977 236273 246947DF2988 Polypropylene Viton Viton D0G988 236273 246947DF29GG DC29GG Polypropylene Geolast Geolast D0G9GG 236273 246947

Kynar DF5311 Stainless Steel PTFE PTFE D0G311 236273 246947DF5666 Santoprene Santoprene Santoprene D0G666 236273 246947DF5811 DG5811 Viton PTFE PTFE D0G811 236273 246947DF5888 DG5888 Viton Viton Viton D0G888 236273 246947DF5A11 DG5A11 Kynar PTFE PTFE D0GA11 236273 246947DF5A88 Kynar Viton Viton D0GA88 236273 246947

Corrosion Resistant Pumps with Stainless Steel Center SectionPolypropylene DV2311 DW2311 Stainless Steel PTFE PTFE D0G311 236273 246947

DV2341 DW2331 Hardened SST Stainless Steel PTFE D0G331 236273 246947DV2377 DW2377 Stainless Steel Buna Buna D0G377 236273 246947DV2777 DW2777 Buna Buna Buna D0G777 236273 246947DV2888 DW2888 Viton Viton Viton D0G888 236273 246947DV2911 DW2911 Polypropylene PTFE PTFE D0G911 236273 246947DV2977 DW2977 Polypropylene Buna Buna D0G977 236273 246947DV2988 DW2988 Polypropylene Viton Viton D0G988 236273 246947DV2A11 DW2A11 Kynar PTFE PTFE D0GA11 236273 246947DV2A88 DW2A88 Kynar Viton Viton D0GA88 236273 246947

Kynar DV5311 DW5311 Stainless Steel PTFE PTFE D0G311 236273 246947DV5811 DW5811 Viton PTFE PTFE D0G811 236273 246947DV5888 DW5888 Viton Viton Viton D0G888 236273 246947DV5A11 DW5A11 Kynar PTFE PTFE D0GA11 236273 246947DV5A88 DW5A88 Kynar Viton Viton D0GA88 236273 246947




46




• Larger ports for more flow – up to 150 gpm (568 lpm)

• Fluid pressure up to 120 psi (8.4 bar, 0.84 MPa)







• Bulk fluid supply


• Ground water and sump evacuation


• Tank and bilge drainage

• Slurry and sludge transfer

• Filter press feed

Typical Fluids Handled• Alkalies and solvents

• Suspensions and dispersions

• Solvents, latex paints, varnishes, resins and adhesives

• Sludge and waste water

Husky 2150 Aluminum DF3XXX or DG3XXX

Husky 2150 Stainless Steel DF4XXX or DG4XXX

Husky 2150 Ductile Iron DF6XXX or DG6XXX

Husky 2150 Stainless Steel DV4XXX or DW4XXX

Husky 2150 Extended Aluminum DFHXXX or DFGXXX



Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.4 bar, 0.84 MPa)Maximum free flow delivery* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 gpm (568 lpm)Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.03 gallon (3.90 liter)Maximum suction lift (DF3666) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 ft (6.1 m) dryMaximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 in (6.3 mm)Maximum operating temperature***


Typical sound level at 70 psi air (4.9 bar, 0.49 MPa) air @ 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 dBaMaximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 scfm (4.9 m3/min)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 120 psi

(1.4 to 8.4 bar, 0.14 to 0.84 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)Fluid inlet & outlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 in (51 mm) npt and bspt Weight

Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 lb (26.3 kg)Extended aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 lb (28.1 kg)Stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 lb (57.6 kg)Stainless steel with stainless steel center section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146.5 lb (66.4 kg)Ductile iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 lb (59 kg)


System Drawing





Dimensions






23.0 in.(584 mm)

6.0 in. (152.5 mm)

17.45 in. (443 mm)

1/2 npt(f)Air Inlet


(muffler included)

21.37 in.(543 mm)

19.37 in.(492 mm)

12.3 in.(312.5 mm)

8.39 in.(213 mm)

9.06 in.(230 mm)

2.0 in.(51 mm)

0.38 in.(9.5 mm)

6.0 in. (152.5 mm)

Port Diameter:2 in. (51 mm)

12.5 in. (317.5 mm)

6.25 in.(159 mm)



Popular ModelsPart Number Part Number(NPT Ported) (BSP Ported)

Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Material Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Air Kit Control*Standard Pumps with Aluminum Center SectionAluminum** DF3311 DG3311 DFC311 DGC311 Stainless Steel PTFE PTFE D0F311 236273 246947

DF3341 DG3341 DFC341 DGC341 Hardened SST Stainless Steel PTFE D0F331 236273 246947DF3366 DG3366 DFC366 DGC366 Stainless Steel Santoprene Santoprene D0F366 236273 246947DF3377 DG3377 DFC377 DGC377 Stainless Steel Buna Buna D0F377 236273 246947DF3525 DG3525 DFC525 DGC525 Hytrel Acetal Hytrel D0F525 236273 246947DF3555 DFC555 Hytrel Hytrel Hytrel D0F555 236273 246947DF3666 DG3666 DFC666 DGC666 Santoprene Santoprene Santoprene D0F666 236273 246947DF3777 DG3777 DFC777 DGC777 Buna Buna Buna D0F777 236273 246947DF3888 DG3888 DFC888 DGC888 Viton Viton Viton D0F888 236273 246947DF3GGG DG3GGG DFCGGG DGCGGG Geolast Geolast Geolast D0FGGG 236273 246947DF3911 DG3911 DFC911 DGC911 Polypropylene PTFE PTFE D0F911 236273 246947DF3977 DG3977 DFC977 Polypropylene Buna Buna D0F977 236273 246947

Stainless Steel DF4311 DG4311 DFD311 DGD311 Stainless Steel PTFE PTFE D0F311 236273 246947DF4341 DFD341 Hardened SST Stainless Steel PTFE D0F331 236273 246947DF4366 DG4366 DFD366 DGD366 Stainless Steel Santoprene Santoprene D0F366 236273 246947DF4377 DG4377 DFD377 DGD377 Stainless Steel Buna Buna D0F377 236273 246947DF4525 DFD525 Hytrel Acetal Hytrel D0F525 236273 246947DF4666 DG4666 DFD666 DGD666 Santoprene Santoprene Santoprene D0F666 236273 246947DF4777 DG4777 DFD777 DGD777 Buna Buna Buna D0F777 236273 246947DF4888 DG4888 DFD888 DGD888 Viton Viton Viton D0F888 236273 246947DF4GGG DG4GGG DFDGGG DGDGGG Geolast Geolast Geolast D0FGGG 236273 246947DF4911 DFD911 Polypropylene PTFE PTFE D0F911 236273 246947

Ductile DF6311 DFF311 Stainless Steel PTFE PTFE D0F311 236273 246947DF6366 DFF366 Stainless Steel Santoprene Santoprene D0F366 236273 246947DF6441 DFF441 Hardened SST Hardened SST PTFE D0F441 236273 246947DF6466 DG6466 DFF466 DGF466 Hardened SST Santoprene Santoprene D0F466 236273 246947DF6525 DFF525 Hytrel Acetal Hytrel D0F525 236273 246947DF6666 DG6666 DFF666 DGF666 Santoprene Santoprene Santoprene D0F666 236273 246947DF6A11 DFFA11 Kynar PTFE PTFE D0FA11 236273 246947DF6A88 DFFA88 Kynar Viton Viton D0FA88 236273 246947DF6GGG DG6GGG DFFGGG DGFGGG Geolast Geolast Geolast D0FGGG 236273 246947

Corrosion Resistant Pumps with Stainless Steel Center SectionStainless Steel DV4311 DW4311 DVD311 DWD311 Stainless Steel PTFE PTFE D0F311 236273 246947

DV4377 DW4377 DVD377 DWD377 Stainless Steel Buna Buna D0F377 236273 246947DV4388 DW4388 DVD388 DWD388 Stainless Steel Viton Viton D0F388 236273 246947DV4666 DW4666 DVD666 DWD666 Santoprene Santoprene Santoprene D0F666 236273 246947DV4888 DW4888 DVD888 DWD888 Viton Viton Viton D0F888 236273 246947DV4911 DW4911 DVD911 DWD911 Polypropylene PTFE PTFE D0F911 236273 246947

* Air control includes air regulator and filter with gauge** Also available in Extended Height version; use DFH or DFG designations



50

Husky 3275 Aluminum PumpsAir-Operated Double-Diaphragm


Features• 3 in (76.2 mm) ANSI center-porting that is internally threaded

3 npt or bspt

• Bolted leak-free, flanged connections — no clamp bands used

• Large flow paths for high viscosities

• Easy air valve maintenance

• Heavy-duty construction

• Fluid flow up to 275 gpm (1040 lpm)

Typical Applications• Chemical transfers

• Filter press-feed

• Dewatering


• Bulk paint resins

• Ceramic slip

Husky 3275 Aluminum DK3XXX


Husky 3275Aluminum Pumps

Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.4 bar, 0.84 MPa)Maximum free flow delivery* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275 gpm (1,041 lpm)Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 gallon (7.6 liter)Maximum suction lift (DK3666) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ft (2.4 m) dryMaximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.38 in (9.4 mm)Maximum operating temperature***

PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°F (104.4°C)Santoprene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180°F (82.2°C)Hytrel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°F (65.5°C)Geolast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°F (65.5°C)

Typical sound level at 70 psi air (4.9 bar, 0.49 MPa) air @ 105 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 dBaMaximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 scfm (9.1 m3/min)Air consumption at 70 psi (4.7 bar, 0.47 MPa)/100 gpm (379 lpm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 scfm (1.26 m3/min)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 to 120 psi

(1.4 to 8.4 bar, 0.14 to 0.84 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4 npt(f)Fluid inlet & outlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 in (76.2 mm) ANSI 4 bolt flange/DIN 8-bolt flange

internal thread is 3 npt or bsptWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 lb (68 kg)Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308639* Flow rates are with muffler and do not vary based on diaphragm material** Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type*** Actual pump performance may be affected by prolonged usage at temperature

System Drawing





Dimensions




The highlighted areas indicate possible configurations for the Husky 3275 aluminum pumps.


28.6 in.(727 mm)

24.5 in.(622.5 mm)

8.39 in.(213 mm)

20.3 in.(516 mm)

7.9 in. (200 mm) OD

12 in. (305 mm)

30.5 in. (774 mm)

Four Holes0.84 in. (21.5 mm)

(ANSI)

Fluid Outlet (Top Manifold )Fluid Inlet (Bottom Manifold )3.25 in. (83 mm) diameter ID

4.1 in.(104 mm)

0.185 in.(5 mm)

Eight Holes0.84 in. (21.5 mm)

(DIN)

6.5 in. (165 mm)

13 in. (330 mm)

15 in. (381 mm)

20.65 in.(524.5 mm)

Flangesare

Flat Faced

4.75 in.(121 mm)

16.94 in.(430 mm) Air

Exhaust(muffler

included):1 npt(f)



Popular Models


Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Material Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Air Kit Control*Aluminum DK3311 NA DKC311 NA Stainless Steel PTFE PTFE D0K311 238765 246948

DK3316 NA DKC316 NA Stainless Steel PTFE Santoprene D0K316 238765 246948DK3366 NA DKC366 NA Stainless Steel Santoprene Santoprene D0K366 238765 246948DK3515 NA DKC515 NA Hytrel PTFE Hytrel D0K515 238765 246948DK3525 NA DKC525 NA Hytrel Acetal Hytrel D0K525 238765 246948DK3565 NA DKC565 NA Hytrel Santoprene Hytrel D0K565 238765 246948DK3611 NA DKC611 NA Santoprene PTFE PTFE D0K611 238765 246948DK3616 NA DKC616 NA Santoprene PTFE Santoprene D0K616 238765 246948DK3666 NA DKC666 NA Santoprene Santoprene Santoprene D0K666 238765 246948DK3GG6 NA DKCGG6 NA Geolast Geolast Santoprene D0KGG6 238765 246948DK3GGG NA DKCGGG NA Geolast Geolast Geolast D0KGGG 238765 246948




54

Husky 1040 FDA Sanitary PumpAir-Operated Double-Diaphragm


Features and Benefits• All fluid contact materials are FDA-compliant and meet the United

States Code of Federal Regulations (CFR), Title 21

• FDA pumps have an epoxy coated, aluminum center section; FDA Plus pumps have a 316 stainless steel center section

• Seats, balls and diaphragms are available in a wide range of food grade elastomers

• Patented dual cup air valve – one of the most reliable air valves in the market


Typical Application• Moving very flowable materials

• Evacuating food process mixing kettles

• Transferring ingredients from original containers to mixing tanks

• Evacuating liquid concentrates from shipping tankers to holding vessels

Typical Fluids Handled• Fruit juice • Sauce

• Wine • Oil

• Pureed fruit • Pastes and starches

• Corn syrup • Mineral oil

• Lanolin alcohol • Glycol

Husky 1040 FDA Stainless Steel D7SXXX or D8SXXX

Husky 1040 FDA Plus Stainless Steel

DRSXXX or DSSXXX


Husky 1040 FDASanitary Pumps

Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.4 bar, 0.84 MPa)Maximum free flow delivery* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 gpm (151 lpm)Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.15 gallon (0.57 liter)Maximum suction lift (D7S888) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ft (5.48 m) wet or dryMaximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.13 in (3.2 mm)Maximum diaphragm ball and seat operating temperature ratings***

PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220ºF (104.4ºC)Santoprene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180ºF (82.2ºC)Buna-N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180ºF (82.2ºC)Viton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250ºF (121ºC)

Typical sound level at 70 psi air (0.49 bar, 4.9 MPa) air @ 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 dBaMaximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 scfm (1.7 m3/min)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 120 psi

(1.4 to 8.4 bar, 0.14 to 0.84 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)Fluid inlet & outlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1/2 in (38.1 mm) Tri-ClampWeight (with aluminum center section) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 lb (16 kg)Weight (with stainless steel center section) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 lb (22 kg)Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .309528* Flow rates are with muffler and do not vary based on diaphragm material

** Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type

*** Actual pump performance may be affected by prolonged usage at temperature

System Drawing


Husky 1040 FDA Above Ground Gravity Feed



Dimensions

9.9 in(251 mm)

12.8 in(325 mm) 7.2 in

(183 mm)

15.3 in(389 mm)

5.5 in(140 mm)

12.3 in(312 mm)

Air Inlet1/2 npt(f)

1-1/2 in OutletSanitary Flange

1-1/2 in InletSanitary Flange

Air Exhaust(muffler included)

3/4 npt(f)3/8-16 Threads

2.0 in(51 mm)

Mounting Hole Width 5.0 in (127 mm)

Overall Width = 9.2 in (233 mm)




The highlighted areas indicate possible configurations for the Husky 1040 sanitary series pumps.




FDA FDA PlusAluminum Center Section Stainless Steel Center SectionStandard Remote Standard Remote Materials for Materials for Materials for Fluid Air AirAir Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Kit Control*

D7S311 D8S311 DRS311 DSS311 Stainless Steel w/ PTFE Seal PTFE PTFE D07311 236273 246948D7SB11 D8SB11 DRSB11 DSSB11 Stainless Steel w/ Viton Seal PTFE PTFE D07B11 236273 246948D7S666 D8S666 DRS666 DSS666 Santoprene w/ PTFE Seal Santoprene Santoprene D07666 236273 246948D7SC66 D8SC66 DRSC66 DSSC66 Santoprene w/ Viton Seal Santoprene Santoprene D07C66 236273 246948D7S377 D8S377 DRS377 DSS377 Stainless Steel w/ PTFE Seal Buna Buna D07377 236273 246948D7SB77 D8SB77 DRSB77 DSSB77 Stainless Steel w/ Viton Seal Buna Buna D07B77 236273 246948D7S388 D8S388 DRS388 DSS388 Stainless Steel w/ PTFE Seal Viton Viton D07388 236273 246948D7SB88 D8SB88 DRSB88 DSSB88 Stainless Steel w/ Viton Seal Viton Viton D07B88 236273 246948D7S766 D8S766 DRS766 DSS766 Buna Santoprene Santoprene D07766 236273 246948D7S777 D8S777 DRS777 DSS777 Buna Buna Buna D07777 236273 246948D7S811 D8S811 DRS811 DSS811 Viton PTFE PTFE D07811 236273 246948D7S866 D8S866 DRS866 DSS866 Viton Santoprene Santoprene D07866 236273 246948D7S888 D8S888 DRS888 DSS888 Viton Viton Viton D07888 236273 246948* Air control includes air regulator and filter with gauge

Popular Models



58

Husky 1590 FDA Sanitary PumpsAir-Operated Double-Diaphragm


Features and Benefits• All fluid contact materials are FDA-compliant and meet the

United States Code of Federal Regulations (CFR), Title 21

• FDA pumps have an epoxy coated, aluminum center section; FDA Plus pumps have a 316 stainless steel center section


• Patented dual cup air valve – one of the most reliable air valves in the market.


Typical Application• Moving fluids ranging from slow moving to very flowable


• Transferring of ingredients from original containers to mixing tanks


• Repackaging fluids from original containers to smaller receptacles

Typical Fluids Handled• Concentrated fruit juice • Pizza paste

• Wine • Oil

• Jams & jellies • Pastes and starches

• Corn syrup • Mineral oil

• Lanolin alcohol • Glycol

• Pudding • Chocolate

Husky 1590 FDA Stainless SteelDBSXXX or DCSXXX


DTSXXX or DUSXXX



Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.4 bar, 0.84 MPa)Maximum free flow delivery* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 gpm (378.5 lpm)Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 gallon (1.96 liter)Maximum suction lift (DBS888) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ft (5.48 m) wet or dryMaximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.19 in (4.8 mm)Maximum diaphragm operating temperature***


Typical sound level at 70 psi air (4.9 bar, 0.49 MPa) air @ 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 dBaMaximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 scfm (3.5 m3/min)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 120 psi

(1.4 to 8.4 bar, 0.14 to 0.84 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)Fluid inlet & outlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 in (50.8 mm) Tri-ClampWeight (with aluminum center section) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 lb (32.7 kg)Weight (with stainless steel center section) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 lb (40 kg)Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .309528* Flow rates are with muffler and do not vary based on diaphragm material



System Drawing





Dimensions






Air Inlet1/2 npt(f)

2 in OutletSanitary Flange


3/4 npt(f)

2 in InletSanitary Flange

3/8-16 Threads

11.8 in(300 mm)

16.8 in(427 mm) 9.0 in

(229 mm)

16.3 in(414 mm)

20.0 in(508 mm)

6.0 in(152 mm)

2.4 in(61 mm)






DBS311 DCS311 DTS311 DUS311 Stainless Steel w/ PTFE Seal PTFE PTFE D0B311 236273 246948DBSB11 DCSB11 DTSB11 DUSB11 Stainless Steel w/ Viton Seal PTFE PTFE D0BB11 236273 246948DBS666 DCS666 DTS666 DUS666 Santoprene w/ PTFE Seal Santoprene Santoprene D0B666 236273 246948DBSC66 DCSC66 DTSC66 DUSC66 Santoprene w/ Viton Seal Santoprene Santoprene D0BC66 236273 246948DBS377 DCS377 DTS377 DUS377 Stainless Steel w/ PTFE Seal Buna Buna D0B377 236273 246948DBSB77 DCSB77 DTSB77 DUSB77 Stainless Steel w/ Viton Seal Buna Buna D0BB77 236273 246948DBS388 DCS388 DTS388 DUS388 Stainless Steel w/ PTFE Seal Viton Viton D0B388 236273 246948DBSB88 DCSB88 DTSB88 DUSB88 Stainless Steel w/ Viton Seal Viton Viton D0BB88 236273 246948DBS766 DCS766 DTS766 DUS766 Buna Santoprene Santoprene D0B766 236273 246948DBS777 DCS777 DTS777 DUS777 Buna Buna Buna D0B777 236273 246948DBS811 DCS811 DTS811 DUS811 Viton PTFE PTFE D0B811 236273 246948DBS866 DCS866 DTS866 DUS866 Viton Santoprene Santoprene D0B866 236273 246948DBS888 DCS888 DTS888 DUS888 Viton Viton Viton D0B888 236273 246948* Air control includes air regulator and filter with gauge

Popular Models



62

Husky 2150 FDA Sanitary PumpsSanitary Pumps


Features and Benefits• All fluid contact materials are FDA-compliant and meet the

United States Code of Federal Regulations (CFR) Title 21

• FDA pumps have an epoxy coated, aluminum center section;FDA Plus pumps have a 316 stainless steel center section


• Patented dual cup air valve – one of the most reliable air valves in the market.


Typical Application• Moving fluids ranging from very slow moving to very flowable


• Transferring ingredients from original containers to mixing tanks


Typical Fluids Handled• Concentrated fruit juice • Tomato paste

• Wine • Oil

• Jams & jellies • Pastes and starches

• Corn syrup • Glycol

• Thick sauce • Pudding

• Chocolate • Fruit filling

Husky 2150 FDA Stainless SteelDFSXXX or DGSXXX


DVSXXX or DWSXXX



Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.4 bar, 0.84 MPa)Maximum free flow delivery* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 gpm (568 lpm)Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.03 gallon (3.90 liter)Maximum suction lift (DFS888) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ft (5.48 m) wet or dryMaximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 in (6.3 mm)Maximum diaphragm operating temperature***


Typical sound level at 70 psi air (4.9 bar, 0.49 MPa) air @ 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 dBaMaximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 scfm (4.9 m3/min)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 120 psi

(1.4 to 8.4 bar, 0.14 to 0.84 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)Fluid inlet & outlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1/2 in (63.5 mm) Tri-ClampWeight (with aluminum center section) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 lb (50.8 kg)Weight (with stainless steel center section) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 lb (61 kg)Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309528* Flow rates are with muffler and do not vary based on diaphragm material



System Drawing





Dimensions






18.9 in(480 mm)

22.3 in(566 mm)

27.3 in(693 mm)

16.2 in(411 mm)

3.5 in(89 mm)

6.5 in(165 mm) 2-1/2 in Inlet

Sanitary Flange3/8-16 Threads


3/4 npt(f)

10.2 in(259 mm)

2-1/2 in OutletSanitary Flange

Air Inlet1/2 npt(f)






DFS311 DGS311 DVS311 DWS311 Stainless Steel w/ PTFE Seal PTFE PTFE D0F311 236273 246948DFSB11 DGSB11 DVSB11 DWSB11 Stainless Steel w/ Viton Seal PTFE PTFE D0FB11 236273 246948DFS666 DGS666 DVS666 DWS666 Santoprene w/ PTFE Seal Santoprene Santoprene D0F666 236273 246948DFSC66 DGSC66 DVSC66 DWSC66 Santoprene w/ Viton Seal Santoprene Santoprene D0FC66 236273 246948DFS377 DGS377 DVS377 DWS377 Stainless Steel w/ PTFE Seal Buna Buna D0F377 236273 246948DFSB77 DGSB77 DVSB77 DWSB77 Stainless Steel w/ Viton Seal Buna Buna D0FB77 236273 246948DFS388 DGS388 DVS388 DWS388 Stainless Steel w/ PTFE Seal Viton Viton D0F388 236273 246948DFSB88 DGSB88 DVSB88 DWSB88 Stainless Steel w/ Viton Seal Viton Viton D0FB88 236273 246948DFS766 DGS766 DVS766 DWS766 Buna Santoprene Santoprene D0F766 236273 246948DFS777 DGS777 DVS777 DWS777 Buna Buna Buna D0F777 236273 246948DFS811 DGS811 DVS811 DWS811 Viton PTFE PTFE D0F811 236273 246948DFS866 DGS866 DVS866 DWS866 Viton Santoprene Santoprene D0F866 236273 246948DFS888 DGS888 DVS888 DWS888 Viton Viton Viton D0F888 236273 246948* Air control includes air regulator and filter with gauge

Popular Models



66

Fast-Flo® 1:1Air-Operated Piston Transfer Pumps


Features and Benefits• Air-powered for high reliability and low cost

• Delivery up to 5 gpm (19 lpm)

• Plate (flat) check options for lower viscosity fluids

• UL options available when installed in accordance with NFPA

Typical Application• Transfer from drum to day tank

• Continuous or dead end transfer

• Low viscosity spray adhesive supply

• Supply pump for air spray and HVLP (high volume low pressure)spray applications of coatings and wood finishing materials

Typical Fluids Handled• Anti-freeze

• Windshield washer solvent

• Automatic transmission fluid

• Motor and hydraulic oil

• General chemicals

• Thinners and solvents

• Light viscosity coatings

• Spray adhesives and finishes


Fast-Flo 1:1Air-Operated Piston Transfer Pumps

51.7 in.(1315 mm)

34.6 in.(880 mm)

28.5 in.(724 mm)

Extends to 46.4 in.(1180 mm)

45.6 in.(1158 mm)

Extends to 63.5 in.(1614 mm)

Ordering InformationPart Number Construction Packing226940 Drum/CS/SST (UL, CE) T&L

226941 Drum/CS/SST (UL) PE

226942 Drum/SST PE

226943 Stubby/CS/SST (UL) L

226944 Stubby/CS/SST (UL, CE) PE

226945 Stubby/SST (UL, CE) PE

226946 Drum/CS/SST T

237129 Drum/SST (UL, CE) T

237130 Stubby/CS L

237131 Stubby/CS T

237132 Stubby/CS T

237133 Drum/CS L

237134 Drum/CS (UL) T

N = Neoprene SST = 304 Stainless SteelL = Leather CS = Carbon SteelT = PTFE PE = Polyethylene

Technical SpecificationsPriming Piston

Maximum fluid working pressure 180 psi (12.6 bar, 1.26 MPa)

Maximum pump speed 100 cpm

Pump cycles per gallon (3.8 l) 25

Maximum air input pressure 180 psi (12.6 bar, 1.26 MPa)

Maximum operating temperature 120°F (49°C)

Typical sound level 72 dBa

Air inlet 1/4 npt (f)

Fluid outlet 3/4 npt (f)

Weight 20 lbs (9.07 kg) Drum;

11 lbs (4.99 kg) Stubby

Instruction Manual 307427

Dimensions


Standard 2:1Air-Operated Piston Transfer Pumps

Features and Benefits• Air-powered for high reliability and low cost

• Delivery up to 2.5 gpm (9.46 lpm)

• Divorced-style drum for leak-free operation

• Mountings available for wall mount configuration

Typical Application• Foam chemical supply

• Spray gun supply

• Dispensing valve supply

• Cleaning chemical supply

• Fluid transfer

Typical Fluids Handled• Solvents

• Adhesives

• Resins

• Catalysts

• Chemicals


Standard 2:1Air-Operated Piston Transfer Pumps

Ordering InformationPart Number Construction Packing223954 Stubby/SST T/PE

226040 Drum/SST T

N = Neoprene SST = 304 Stainless SteelL = Leather CS = Carbon SteelT = PTFE PE = Polyethylene

Technical SpecificationsPriming Piston

Maximum fluid working pressure 360 psi (25 bar, .25 MPa)

Maximum pump speed 100 cpm

Pump cycles per gallon (3.8 l) 40

Maximum air input pressure 180 psi (12.6 bar, 1.26 MPa)

Maximum operating temperature 280°F (138°C)

Typical sound level 60 dBa

Air inlet 1/4 npt

Fluid outlet 1/2 npt

Weight 11.5 lbs (5.22 kg)

Instruction Manual 307026

Dimensions

32.3-33.8 in. (822-860 mm)

Adjustable

50.25 in.(1276 mm)Air Inlet

1/4 npt(f)

Fluid Outlet1/2 npt(f)

Air Inlet1/4 npt(f)

Fluid Outlet1/2 npt(f)

Fluid Intake3/4 npt(f)

13.70-14.10 in (348-358 mm)

Adjustable

30.5 in.(775 mm)

70

Hydra-Clean®

Air-Operated Pressure Washers


Features and Benefits• Supply packages include everything you need for use

with open-head universal drums

• Available with an accumulator and chemical injector

• Configurations available to fit most pressure, flow, and material requirements

• Supports multiple guns

• Use with cold or hot water up to 200˚F (93˚C)

Typical Applications• Vehicle fleets, buses, transit systems

• Heavy construction equipment, off-highway vehicles

• General industrial equipment

• Building exteriors

• Sanitizing

• Public works facilities and equipment

• Farm maintenance

• Marinas

Typical Coatings Applied• Water

• Detergent solutions

• Chemical solutions

Technical SpecificationsMax. Working Max. Air Fluid Flow Vol. per Air Fluid Fluid Package

Part Pump Pressure Input Pressure at 60 cpm Cycle Inlet Inlet Outlet InstructionNumber Package psi (MPa, bar) psi (MPa, bar) gpm (lpm) oz (cc) Size Size Size Manual

206515 President 10:1 1000 100 3 gpm 6.4 1/2 npt(f) 3/4 npt(f) 1/2 npt(f) 306817(7, 69) (0.7, 7) (11.4) (189)

226314 Bulldog 10:1 1000 100 8 17 3/4 npsm(f) 2 npt(f) 1-1/2 npt(m) 306926(7, 69) (0.7, 7) (29) (505) 308509

965389 Premier 34:1 3400 100 9.2 19.6 3/4 npsm(f) 2 npt(f) 1-1/2 npt(m) –

(23, 230) (0.7, 7) (34.8) (580)

Bulldog 10:1 Cart Mount

President 10:1 Open Drum Mount


Hydra-CleanAir-Operated Pressure Washers

AccessoriesGUNS AND TIPS208008 Hydra-Clean Spray Gun with 10 in. Wand

804381 Hydra-Clean Gun with 32 in. Wand

207299 10 in. Replacement Wand for Hydra-Clean

FLUID HOSESWhip Hose

Maximum working pressure: 3000 psi (20.7 MPa, 207 bar). ID 3/16 in. (5 mm).214700 2 ft. (0.6 m), 1/4 npsm(fbe)214701 3 ft. (0.9 m), 1/4 npsm(f) x 1/4 npt(m)

Maximum working pressure: 5000 psi (34.5 MPa, 345 bar). ID 1/4 in. (0.63 cm), 1/4 npsm(fbe).214912 3 ft. (0.91 m)214913 6 ft. (1.83 m)

Fluid HoseMaximum working pressure: 3000 psi (20.7 MPa, 207 bar). ID 3/8 in. (9.52 mm), 3/8 npt(mbe).214703 25 ft. (7.62 m)214705 50 ft. (15.24 m)214920 100 ft. (30.4m)

Maximum working pressure: 3000 psi (20.7 MPa, 207 bar). ID 1/4 in. (6.3 mm). 1/4 npsm(fbe).223540 ID 1/4 in. x 25 ft. (6.3 mm x 7.6 m)

1/4 npsm(fbe)

Maximum working pressure: 4050 psi (28 MPa, 280 bar). ID 1/2 in. (12.7 mm), 1/2 npt(mbe).215226 25 ft. (7.62 m)215227 50 ft. (15.24 m)215228 100 ft. (30.48 m)

Maximum working pressure: 5000 psi (34.5 MPa, 345 bar). ID 3/8 in. (9.5 mm), 3/8 npt(m) x 3/8 npt(f).238395 24.6 ft. (7.5 m)238396 49.2 ft. (15 m)238397 98.4 ft. (30 m)

Maximum working pressure: 5000 psi (34.5 MPa, 345 bar). ID 1/2 in. (12.7 mm), 1/2 npt(fbe).238716 24.6 ft. (7.5 m)238717 49.2 ft. (15 m)238718 98.4 ft. (30 m)223541 ID 1/4 in. x 50 ft. (6.3 mm x 15.2 m)

1/4 npsm(fbe)

Ordering InformationPresident 10:1 Bulldog 10:1 Premier 34:1

Package Order Nos. 206515 226314 965389Pump Assembly Part No. 224346 206797

Pump Lower Part No. 224344 206792 222994Construction SST SST SSTStandard Seal Repair Kits 224402 207581 222876Construction UHMWPE/Neoprene PTFE PTFEOptional Seal Repair Kits 224404 N/A 222875Construction UHMWPE/PTFE UHMWPE/PTFE

Motor Repair Kit 207385 206734 222458

SERVICE PARTS INFORMATIONPump Lower Part Nos. 224344 206792 222994Displacement Rod 186997 206614 184002Construction SST SST SSTCylinder 186994 166368 184003Construction SST SST SSTIntake Valve (separate part numbers)

Intake Ball 101917 101968 110294Intake Valve Seat 186992 206617 222-838

Piston Valve (separate part numbers)Piston Ball 101917 101968 109220Seat 186993 206616 222802Ball Guide N/A N/A 184297

Accessories (continued)AIR HOSESGrounded Buna-N Air Hose

Maximum working pressure: 175 psi (1.2 MPa, 12 bar). ID3/4 in. (19 mm). Thread size: 3/4 npt(m).208610 6 ft. (1.8 m)205548 15 ft. (4.5 m)208611 25 ft. (7.6 m)208612 50 ft. (15.2 m)

AIR CONTROLS AND VALVES244720 Modular Air Regulator Kit with Built-In Filter

Maximum working pressure: 250 psi (1.7 MPa, 17 bar). 3/4npt(f).

244841 Modular Air Line Lubricator KitMaximum working pressure: 250 psi (1.7 MPa, 17 bar).3/4 npt(f)

207651 Air Regulator KitMaximum working pressure: 300 psi (2.1 MPa, 21 bar).3/4 npt(f).

214849 Air Line Lubricator Maximum working pressure: 250 psi (1.7 MPa, 17 bar).3/4 in. npt(f).

Safety Relief ValvesLimits Inlet air pressure to appropriate pump ratio maximum working pressure.116643 90 psi (0.62 MPa, 6.2 bar)103347 100 psi (0.69 MPa, 6.9 bar)113498 110 psi (0.76 MPa, 7.6 bar)

245143 Pressure Bleed Valve Maximum working pressure: 7400 psi (51 MPa, 510 bar).

245145 Pressure Bleed Valve Repair Kit Includes ball, seat, retaining ring, O-ring, gasket.

224040 Pump Runaway ValveMaximum working pressure: 120 psi (0.83 MPa, 8.3 bar). Inlet/outlet: 3/4 npt(f). Includes optional 90º 3/4 npsm swivel fitting.

Ball ValveMaximum working pressure: 5000 psi (34.5 MPa, 345 bar).210657 Inlet: 1/4 npt(m). Outlet: 1/4 npt(m).210658 Inlet: 3/8 npt(m). Outlet: 3/8 npt(m).210659 Inlet: 1/4 npt(m). Outlet: 3/8 npt(m).

Maximum working pressure: 7400 psi (51 MPa, 510 bar).237303 1/4 npt(mbe)237304 3/8 npt(mbe)

107141 Bleed-Type Master Air ValveMaximum working pressure: 300 psi (2.1 MPa, 21 bar).

ADAPTERS AND FITTINGSHose Swivel

214925 Maximum working pressure: 5000 psi (34.5 MPa, 345 bar). 3/8 npt(f) x 1/4 npsm(f).

236987 Maximum working pressure: 7400 psi (51 MPa, 510 bar).1/4 npsm(m) x 1/4 npsm(f).

189018 Maximum working pressure: 5800 psi (39.9 MPa, 399 bar).1/4 npsm(m) x 1/4 npsm(f).

156173 Union Swivel Maximum working pressure: 7400 psi (51 MPa, 510 bar). Use to connect 3/8 in. (9.5 mm) hoses together.3/8 npt(f) x 3/8 npsm(f).

150287 Hose CouplerMaximum working pressure: 8000 psi (55 MPa, 550 bar). Use to connect 3/8 in. (9.5 mm) hose to whip hose. 3/8 npt(f) x 1/4 npt(m).

Gun Swivels (25 Pack)Maximum working pressure: 3600 psi (25 MPa, 250 bar). 1/4 npsm(f) x 1/4 npt(m).239663 Leather223341 PTFE

Maximum working pressure: 5000 psi (34.5 MPa, 345 bar).214925 Leather 1/4 npsm(f) 3/8 npt(f)214926 Leather 1/2 npsm(f) 3/8 npt(f)

Maximum working pressure: 5800 psi (48 MPa, 406 bar).239394 Swivel with Built-in Filter

NipplesUse to connect hoses together.156971 Maximum working pressure: 7500 psi

(51.7 MPa, 517 bar). 1/4 npt x 1/4 npt(mbe).

165198 Maximum working pressure: 10000 psi (69 MPa, 690 bar). 1/4 npt x 3/8 npt(mbe).




72





Accessories (continued)SUCTION KITS AND ACCESSORIES184545 Suction Tube Extension

Screws into fluid intake to make a drum length pump forBulldog 10:1.

222916 Suction Kit, Carbon SteelConnect to pump fluid inlet to draw fluid from 55-gal. (200 L) drum. Includes ID 1-1/2 in. 222914polyethylene hose, 8 ft. (2.4 m) length and 2 npt(m) outletfitting.

236054 Suction Kit, Carbon SteelUse to siphon material out of a 55-gal. (200 L) closed-enddrum. Includes siphon tube, bung adapter, 6 ft. (1.8 m) nitrile hose and 1-1/2 npt(m) outlet fitting.

FILTERSReplacement Screen Filter Elements

3 Pack 25 Pack238435 238436 30 mesh (595 micron)238437 238438 60 mesh (250 micron)238439 238440 100 mesh (149 micron)238441 200 mesh (75 micron)

LIQUIDS AND LUBRICATIONGraco Throat Seal Liquid

206995 1 qt. (0.9 L)206996 1 gal. (3.8 L)

MOUNTING OPTIONS244530 Heavy-Duty 2-Wheel Cart, Bulldog

244527 Light-Duty 2-Wheel Cart, Bulldog

206221 Wall Mounting Bracket, Bulldog

222780 Floor Stand Kit, Bulldog 10:1Use to mount Bulldog 10:1. Includes 222274 floor stand,190166 intake adapter and ball valve.

235414 Connection Kit, Bulldog 10:1Kit to install lower displacement pump under existing Bulldog air motor. Includes tie rods and other con-necting hardware.

236943 2 Wheel Cart, Premier

AIR MOTOR REPAIR KITS222981 Trip Rod Repair Kit

Repair kit to service Premier trip rod.

222982 Detent Repair KitRepair kit to service Premier air motor.

TOOLS109507 Socket Service Tool, Premier 34:1

Use to connect or disconnect displacement rod from piston assembly. Tool fits over the top of the displacement rod, making it easier to apply a 24 in.adjustable wrench or 3/4 in. socket for servicing the displacement rod.

184278 Packing Nut Wrench, Premier 34:1For adjusting throat packing compression in pump.

109508 Socket Service Tool, Bulldog 10:1Use to connect or disconnect displacement rod from piston assembly. Tool fits over the top of the displacement rod, making it easier to apply a 24 in.adjustable wrench or 3/4 in. drive socket for servicing dis-placement rod.

184278 Packing Nut Wrench, Bulldog 10:1For adjusting throat packing compression in pump.

207579 Padded PliersFor servicing Bulldog and King air motor trip rod.

168513 Alignment ToolUse to ensure proper clearance and alignment for theBulldog and King air manifolds.

74

Husky Transfer Pump Packages55 Gallon (208 Liter) Size


Polypropylene

SST

Acetal

Features• Excellent for abrasive, low- to medium-viscosity fluids and

shear sensitive materials

• Suction tube is immersed inside the drum – not the pump

• Quick-priming and immediate flow of product

• Handles fluid viscosities up to 5,000 cps and solids up to 0.09 in (2.29 mm)

• Runs dry without damage

• Provides air tight seal for moisture-sensitive fluids

• Bung adapter fits into any 2 in (50.8 mm) bung opening

• Easy-out seal provides fast slide in and out of drums without disconnecting hoses and accommodates slightly off-sized drums up to 2–1/2 in (63.5 mm)

Typical Applications and Fluids Handled• Industrial solvents: aromatics, esters, ketones,

chlorinated solvents

• Adhesives: contact cement, white glue, resins

• Decorative/protective coatings: paints, stains, varnishes, solvents

• Lubricants/coolants: motor oil, hydraulic fluids, cutting fluids, anti-freeze

• Cleaners/sanitizers: soaps, detergents, solvents, acids, caustics

• Inks: flexographic, silk-screen


Husky Transfer Pump Packages 55 Gallon (208 Liter) Size

Maximum fluid working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 psi (7 bar, 0.7 MPa)Maximum free flow delivery*

For 515 (1/2 in [12.7 mm] ports) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 gpm (57 lpm)For 716, 515 (3/4 in [19.05 mm] ports) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 gpm (61 lpm)

Maximum pump speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 cpmDisplacement per cycle** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.04 gallon (0.15 liter)Maximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.094 in (2.5 mm)Typical sound level @ 70 psi (4.8 bar, 0.48 MPa) air @ 50 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 dBaMaximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 scfm (0.672 m3/min)Air pressure operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 to 100 psi

(1.8 to 7 bar, 0.18 to 0.7 MPa)Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npt(f)Air exhaust port size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8 npt(f)Fluid inlet size for Husky 515 and Husky 715 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3/4 npt(f)Fluid outlet size

Husky 515 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 and 3/4 npt(f)Husky 716 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4 npt(f)

Wetted parts (fluid covers and manifolds)Acetal pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . groundable acetal, PTFEPolypropylene pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . polypropylene, PTFEAluminum pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . aluminum, Stainless Steel, PTFE, zinc-plated steelStainless Steel pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . stainless steel, PTFE

Pump weightPolypropylene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5 lb (2.9 kg)Acetal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.8 lb (3.5 kg)Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.5 lb (3.9 kg)Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 lb (8.2 kg)

Drum kit weightPolypropylene tube w/poly easy-out seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 lb (1.8 kg)Aluminum tube with acetal easy-out seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 lb (2.0 kg)Stainless Steel tube with acetal easy-out seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5 lb (2.9 kg)Stainless Steel tube with Stainless Steel easy-out seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.5 lb (4.3 kg)

Drum package weightPolypropylene pump with polypropylene tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.5 lb (4.8 kg)Acetal pump with aluminum tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.3 lb (5.6 kg)Aluminum pump with aluminum tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.0 lb (5.9 kg)Acetal pump with Stainless Steel tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.3 lb (6.5 kg)Stainless Steel pump with Stainless Steel tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.5 lb (12.5 kg)

Drum package instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309116Husky 515/716 instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308981* Flow rates are with muffler and do not vary based on diaphragm material** Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type



246946 Air Regulator/Filter

208536 Air Line Quick Coupler

169970 Quick Coupler Nipple

Dimensions

Husky Transfer Pump Packages 55 Gallon (208 Liter) Size

Adjustable from 2.6 in. (66 mm) to 5.1 in. (130 mm)




8.5 in.(216 mm)

6.0 in.(152 mm)

Poly, Acetal and Aluminum Pumps

Adjustable from 2.6 in. (66 mm) to5.1 in. (130 mm)


8.5 in.(216 mm)

6.9 in.(175 mm)

Stainless Steel Pumps


Accessories

Pump Components Drum Kit ComponentsPackage Pump* Drum** Tube Tube Easy Out Seal andNumber Pump Type Number Seats Balls Diaphragms Kit Number Material Part Number Mounting Base233051 Husky 515 Polypropylene 241565 Polypropylene PTFE PTFE 233045 Polypropylene 196096 233073233052 Husky 515 Acetal 241564 Acetal PTFE PTFE 233047 Stainless Steel 196094 233074233053 Husky 515 Acetal 241564 Acetal PTFE PTFE 233046 Aluminum 195095 233074233054 Husky 716 Aluminum 243305 Acetal Santoprene Santoprene 233046 Aluminum 196095 233074233055 Husky 716 Aluminum 243306 Acetal Buna Buna 233046 Aluminum 196095 233074233056 Husky 716 Aluminum 243307 Acetal PTFE PTFE 233046 Aluminum 196095 233074233057 Husky 716 Stainless Steel D54311 Stainless Steel PTFE PTFE 233048 Stainless Steel 196094 233076* Pump number consists of seats, balls, diaphragms and an open down port** Drum kit number consists of an easy out seal, mounting base and tube

Overall height depends on pump.See page 20 or 24 for pump dimensions


Husky Transfer Pump PackagesPump and Agitator Packages

Husky Twistork™ PackageIdeal for closed 55 gallon (200 liter) drum agitating and evacuation in one simple, easy-to-use package. Easily mixes most paints, resins, urethanes, epoxies and silicones.

Includes:

• Twistork siphon agitator

• Husky 515 – 1/2 in (12.7 mm) air-operateddouble-diaphragm pump

• Bracket-mounted in a simple package to fit into a 2 in (50.8 m) bung

• Powerful helical blade to lift and disperse solids from the drum bottom for material consistency

• Exclusive in-shaft siphon tube allows simultaneous mixing and evacuatingfor greater savings on equipment, time and material

Ordering Information238859 Husky 515 D52911 Polypropylene pump mounted on Twistork

238860 Husky 515 D51211 Acetal Pumps mounted on Twistork

Husky 55 gal (200 l) Dispensing PackageThis fully-integrated system includes:

• Stainless steel back-geared agitator with siphon tube

• Stainless steel drum cover

• Husky 515 – 1/2 in (12.7 mm) air-operated double-diaphragm pump

• Air-powered drum cover lift

• Air controls and dispense valve

Ordering Information231418 Husky 515 acetal pump, stainless steel drum cover,

heavy-duty agitator, drum cover lift, hose and valve

231419 Same as 231418 (excludes hose or valve)

78

CycleFlo™

Solenoid Pump Controllers


Features and Benefits• Total fluid control when used with remote Husky

diaphragm pumps

• Automates processes

• Controls flow rates and batch rates with ±5% accuracy at a fraction of the cost of elaborate pump metering systems

• Controls dispenses from 23 cps up to 10,000 gallons per batch

• Flow rate control independent of fluid pressure

• Presets range from 10 to 200 cycles per minute

• Fully pneumatic hookups from CycleFlo Controller to Husky remote diaphragm pump

• 32 programmable presets for cycle count

• Operates in manual and remote modes

Typical Application• Waste neutralization

• Inline chemical injection

• Measured flow

• Storage to production transfer

• Bulk transfer

• Filtration

Typical Fluids Handled• Caustics and acids

• Recovered waste materials

• Process chemicals

• Coatings and inks

• Soaps and sanitary chemicals

CycleFlo195264 and 196706


CycleFlo IISolenoid Pump Controllers

Features and Benefits• Total fluid control when used with remote Husky

diaphragm pumps

• Automates processes

• Controls flow rates and batch rates with ±5% accuracy at a fraction of the cost of elaborate pump metering systems

• Flow rate control independent of fluid pressure

• Fully pneumatic hookups from CycleFlo II Controller to Huskyremote diaphragm pump

• Continually operates pump at a designed cycle speed, whileelectric signal is activated

Typical Application• Waste neutralization

• Inline chemical injection

• Measured flow

• Storage to production transfer

• Bulk transfer

• Filtration

Typical Fluids Handled• Caustics and acids

• Recovered waste materials

• Process chemicals

• Coatings and inks

• Soaps and sanitary chemicals

CycleFlo195265


CycleFlo and CycleFlo IISolenoid Pump Controllers




Highlighted areas indicate the different sizes of remote pumps and available materials of construction for seats, balls and diaphragmsthat can be used with the CycleFlo and CycleFlo II controller.


Pump Selector

Mounting Dimensions

4 in(102 mm)

8.875 in(225 mm)

7.375 in (187 mm)

7.375 in (187 mm)

5 in (127 mm)

5 in (127 mm)

CycleFlo CycleFlo II

195264 CycleFlo Pneumatic pump controller, 120V

196706 CycleFlo Pneumatic pump controller, 240V

195265 CycleFlo II Pneumatic pump controller, 120V



How To Determine The Best Remote Pump:1. Configure the best seat, ball and diaphragm combination, as well as fluid wetted parts, based on material compatibility and

application requirements. • If the material is a mild acid, the choice is a DX2911.

2. Determine dispense time and volume accuracy. • In two minutes, 50 gallons need to be dispensed ±5% accuracy

3. Use the displacement volume chart below to choose the pump size with an outlet volume/cycle that is most closely divisible into your required flow. • Husky 1590 produces .5 gal/cycle• Husky 2150 produces 1.03 gal/cycle

4. Determine the number of cycles required. Calculate the dispense time by dividing required flow by outlet volume per cycle.• Husky 1590 = 50 gal/0.5 gal/cycle = 100 cycles• Husky 2150 = 50 gal/1.03 gal/cycle = 48.55 cycles

5. Determine if cycle output is within the dispense accuracy required.• Husky 2150 requires 48.55 cycles to pump 50 gallons. Only full cycles are possible, so either 48 or 49 cycles can be counted.

At the 48 cycle count, dispense would be 49.44 gallons. At the 49 cycle count, dispense would be 50.47 gallons.• Husky 1590 requires 100 cycles to pump 50 gallons. No partial cycles required.

6. After determining the best size, use the pump ordering matrix to decide which remote center section is most suitable for the application – DC2911 (aluminum center section) or DU5911 (stainless steel center section).• Since a mild acid is being pumped, DC2911, an aluminum center section would be the best choice.

Husky 205 Husky 515 Husky 716 Husky 1040 Husky 1590 Husky 21501/4 in 1/2 in 3/4 in 1 in 1-1/2 in 2 in

Cubic Centimeters (cc's) 46 150 150 570 1960 3000Liters 0.05 0.15 0.15 0.57 1.96 3.9Grams (assumes s.g =1.0) 46 150 150 570 1960 3900Kilograms (kg's) 0.05 0.15 0.15 0.57 1.96 3.9Gallons 0.01 0.04 0.04 0.15 0.50 1.03Quarts 0.05 0.16 0.16 0.6 2.0 4.12Pints 0.1 0.32 0.32 1.2 4.0 8.24Ounces 1.54 5.12 5.12 19.2 64.0 131.84Cubic Inch 2.77 9.24 9.24 34.65 115.5 237.93

DISPLACEMENT VOLUME CHART


All other equipment shown withCycleFlo II is for system diagram

example purposes only.


Typical Installations

All other equipment shown withCycleFlo is for system diagram

example purposes only.

CycleFlo

CycleFlo II


Surge SuppressorsHusky 750 and Husky 2000

Features and Benefits• Controls pressure fluctuations and acceleration loss,

preventing cavitation

• Creates even fluid flow to the process when placed directly at the discharge of a positive displacement pump

• Accumulates expanded fluids in a closed system, reducing potentially dangerous high pressures

• Absorbs “water hammer” pressure spikes created from quickclosing valves

• Protects filter media from loosening or tearing

• Absorbs initial fluid surge when pump starts, preventing pipe fitting breakage and damage to instrumentation

Typical Application• Transferring • Mixing

• Metering • Filling

• Filtering • Dosing, injecting

• Spraying • Coating

• Printing

Typical Fluids Handled• Chemical process • Biotech/pharmaceutical

• Pulp, paper, textile • Consumer products

• Paint and coating • Food and beverage

• Gas, oil, petrochemical • Water treatment

239095

239126

239096

239088239091



Automatic Husky 750, 3/4 in Surge SuppressorsPolypropylene wetted bottom housing and non-wetted top housingWeight: 9 lb (4.1 kg)239096 with Buna-N bladder239121 with PTFE bellows239122 with Viton® bladder

SST wetted bottom housing and non-wetted top housingWeight: 16 lb (7.3 kg)239095 with Buna-N bladder239123 with PTFE bellows239124 with Viton bladder

Acetal wetted bottom housing and non-wetted top housingWeight: 9 lb (4.1 kg)239094 with Buna-N bladder239125 with PTFE bellows

Adjustable Husky 750, 3/4 in Surge SuppressorsPolypropylene wetted bottom housing and non-wetted top housingWeight: 9 lb (4.1 kg)239091 with Buna-N bladder239129 with PTFE bellows239130 with Viton bladder

SST wetted bottom housing and non-wetted top housingWeight: 16 lb (7.3 kg)239090 with Buna-N bladder239131 with PTFE bellows239132 with Viton bladder

Acetal wetted bottom housing and non-wetted top housingWeight: 9 lb (4.1 kg)239089 with Buna-N bladder239133 with PTFE bellows

Automatic Husky 2000, 2 in Surge SuppressorsSST wetted bottom housing, polypropylene non-wetted top housingWeight: 36 lb (16.3 kg)239093 with Buna-N bladder239126 with PTFE bellows239127 with Viton bladder

Polypropylene wetted bottom housing and non-wetted top housingWeight: 18 lb (8.2 kg)239092 with Buna-N bladder239128 with PTFE bellows

Adjustable Husky 2000, 2 in Surge SuppressorsSST wetted bottom housing, polypropylene non-wetted top housingWeight: 36 lb (16.3 kg)239088 with Buna-N bladder239134 with PTFE bellows239135 with Viton bladder

Polypropylene wetted bottom housing and non-wetted top housingWeight: 18 lb (8.2 kg)239087 with Buna-N bladder239136 with PTFE bellows




Max. air input pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 psi (0.84 MPa, 8.4 bar)Air line connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 nptFluid inlet size

Husky 2000 models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 in nptHusky 750 models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4 in npt

Wetted parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See ordering information, pg 78Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See ordering information, pg 78Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308703


Typical Installation

A

B

C

D

E

A = Air Motor Ground Wire (required)

B = Husky Pump

C = Surge Suppressor Ground Wire

D = Husky Surge Suppressor

E = Container Ground Wire (required)

86

Pump AccessoriesAir-Operated Double-Diaphragm Pump


Husky 205 Accessories Part NumberAIR CONTROLS

Regulator / Filter Assembly 1/4" npt(f) (6.35 mm) 246946

Quick Connect Air Coupler 1/4" npt (6.35 mm) 208356

Quick Connect Air Nipple 1/4" npt (6.35 mm) mbe 169970

Air Shut Off Valve 1/4" npt (6.35mm), bleed type, relieves trapped air downline of valve 110223

Air Runaway Valve (stops pump from cavitating when empty) 224040

Air Muffler (comes with pump) 114174

55-GALLON SIPHON KITS

Polypropylene Suction Kit (includes siphon hose, tube and connectors) 239142

Acetal Suction Kit (includes siphon hose, tube and connectors) 239143

Kynar Suction Kit (includes siphon hose, tube and connectors) 239144

REMOTE PUMP CONTROLLERS

CycleFlo (cpm rate and batch control) 120v 195264


CycleFlo II (rate controller with solenoid valve) 120v 195265

Husky 307 AccessoriesAIR CONTROLS

Regulator / Filter Assembly 1/4” npt(f) (6.35 mm) 246946



Air Shut Off Valve 1/4" npt (6.35 mm), bleed type, relieves trapped air downline of valve 110223

Air Runaway Valve (stop pump from cavitating when empty) 224040



Polypropylene Suction Kit (includes siphon hose, tube and connectors) 235502

Acetal Suction Kit (includes siphon hose, tube and connectors) 235500


Husky 307 pumps are not equipped to run in remote mode N/A

SPLIT MANIFOLD KITS

By varying the manifold kits, pumps can be configured in different ways (one inlet and two outlets, two inlets and one outlet, and two inlets and two outlets, etc), allowing for system flexibility. Pumps need to be ordered separately. One kit is required for each side (top or bottom). See 308439 for details.

Acetal Split Manifold Kit 237211

Polypropylene Split Manifold Kit 237210

Rubber Foot Kit 236452

239142

224040

237210


Pump Accessories

Husky 515 and Husky 716 Accessories Part NumberAIR CONTROLS







Center Section Conversion Kit (converts an old style Husky 715 to a Husky 515/716) 241631

Center Section Conversion Kit (converts an old remote style Husky 715 to a Husky 515/716) 241664


Drum Kit (includes "easy out seal" mounting base and siphon tube). Best used with a wall mounted Husky 515 or 716 model.Pump models can be mounted to base, but may require opening bottom inlet. See 309116 for details.

Mounting Base with a Polypropylene Siphon Tube 233045

Mounting Base with a Aluminum Siphon Tube 233046

Mounting Base with a Stainless Steel Siphon Tube (used with non sst pumps) 233047

Mounting Base with a Stainless Steel Siphon Tube (for sst pump only) 233048





Cycle Counter Kit (counts cycles of pump through a magnetic sensor) 241406

Proximity Switch Kits (used in conjunction with 241406 kit) 241405

SPLIT MANIFOLD KITS

By varying the manifold kits, pumps can be configured in different ways (one inlet and two outlets, two inlets and one outlet, and twoinlets and two outlets, etc), allowing for system flexibility. Pumps need to be ordered separately. See manual 308951 for details.

Polypropylene Inlet Manifolds 241240

Polypropylene Outlet Manifolds 241243

Acetal Inlet Manifolds 241241

Acetal Outlet Manifolds 241244

Kynar Inlet Manifolds 241242

Kynar Outlet Manifolds 241245

MISCELLANEOUS ACCESSORIES

Duckbill Replacement Parts (urethane) for 515 and 716 Husky Pumps 239754

SURGE SUPPRESSORS

Surge suppressors are designed to reduce the pulsation caused during pump changeover. The suppressor construction is generally closely matched with the pump's material (Stainless Steel with Stainless Steel, Acetal with Aluminum, etc.) and areavailable in either an adjustable or automatic version. See 308703 for details.

Automatic Husky 750, 3/4" (19.05 mm)

Polypropylene (wetted bottom and top housings) with a Buna N bladder 239096

with PTFE bellows 239121

with a Viton bladder 239122

233048

195264

241240

239096


Husky 515 and Husky 716 Accessories (continued) Part NumberSURGE SUPPRESSORS (continued)

Stainless Steel (wetted bottom and top housings) with a Buna N bladder 239095



Acetal (wetted bottom and top housings) with a Buna N bladder 239094


Adjustable Husky 750, 3/4" (19.05 mm)







Acetal (wetted bottom and top housings) with a Buna N bladder 239089


LEAK DETECTOR

Leak detectors are designed to shut off the pump in the event a diaphragm fails. The leaking material flows out the air sectionand is captured by the leak detector reservoir. Once the reservoir is filled, a signal is sent that would shut off the pump. Thesedetectors should only be used when a massive failure is allowed.

Polypropylene Housings with PVC Wetted Parts 239080

Acetal Housings and Stainless Steel Wetted Parts 239081

Shut Off Valve Kit (used in conjunction with the 239080 and 239081) 110146

Husky 1040, 1590, 2150 AccessoriesAIR CONTROLS




Air Shut Off Valve 1/2" npt (12.7mm), bleed type, relieves trapped air downline of valve 110225


Air Muffler (comes with pump) 1040 pumps 112812

Air Muffler (comes with pump) 1590 and 2150 pumps 102656

Center Section Conversion Kit (converts an aluminum center section to sst. Includes air covers).

Husky1040 246450

Husky 1590 246451

Husky 2150 245452

55-GALLON SIPHON KIT

Siphon kit is used for drawing fluids from 55-gallon sized containers, through a 2" bung opening. Kit comes with carbon steel tube, 8' (2.44m) polyethylene hose and couplings 222916

Pump Accessories

239095

246451

222916


Pump Accessories

Husky 1040, 1590, 2150 AccessoriesREMOTE PUMP CONTROLLERS




SPLIT MANIFOLD KITS

There are no Husky 1040, 1590, or 2150 pumps with a split manifold option N/A

SURGE SUPPRESSORS

Surge suppressors are designed to reduce the pulsation caused during pump changeover. The suppressor construction is generally closely matched with the pump's material (Stainless Steel with Stainless Steel, Acetal with Aluminum, etc.) and areavailable in either an adjustable or automatic version. See 308703 for details.

Automatic Husky 2000, 2 in (50.8 mm)






Adjustable Husky 2000, 2 in (50.8 mm)






UL PUMPS

For use with leaded and unleaded fuels

Husky 1040 for use with leaded fuel (seat, ball, diaphragm) 236265

Husky 1040 for use with unleaded fuel (seat, ball, diaphragm) 236266

Same as 236265, maximum inlet of 50 psi (3.4 bar, 0.3 MPa) 236267

Same as 236266, maximum inlet of 50 psi (3.4 bar, 0.3 MPa) 236268

LEAK DETECTOR





195265

239088

239080


Pump Accessories

MISCELLANEOUS ACCESSORIES

Flange Kits. Used to transition a flanged pump to a npt connection to transition from a threaded connection to a flange. It is recommended that the flange kit be compatible with the pump material.

Polypropylene 1" (24.14 mm) flange for Husky 1040 D72XXX pumps. 1" ANSI x 1" npt (f) 239005

Stainless Steel 1" (24.14 mm) flange for Husky 1040 D71XXX and D74XXX pumps 1" ANSI x 1" npt (f) 239008

Kynar 1" (24.14 mm) flange for Husky 1040 D75XXX pump 1" ANSI x 1" npt (f) 239009

Polypropylene 1-1/2" (36.84 mm) flange for Husky 1590 DB2XXX pump 1-1/2" ANSI x 1-1/2" (f) 239006

Kynar 1-1/2" (36.84 mm) flange for Husky 1590 DB5XXX pump. 1-1/2" ANSI x 1-1/2" (f) 239010

Polypropylene 2" (48.28 mm) flange for Husky 2150 DF2XXX pump. 2" ANSI x 2" (f) 239007

Kynar 2" (48.28 mm) flange for Husky 2150 DF5XXX pump 2" ANSI x 2" (f) 239011

Husky 3275 AccessoriesAIR CONTROLS








Typically, 3" pumps are not used for emptying 55-gallon containers N/A


Husky 307 pumps are not equipped to run in remote mode N/A

SPLIT MANIFOLD KITS

There are no Husky 3275 with a split manifold option N/A

SURGE SUPPRESSORS

Surge suppressors are designed to reduce the pulsation caused during pump changeover. The suppressor construction is generallyclosely matched with the pump's material (Stainless Steel with Stainless Steel, Acetal with Aluminum, etc.) and are available eitheran adjustable or automatic version. See 308703 for details. Requires bushing down the outlet piping from 3" to 2".

Automatic Husky 2000, 2 in (50.8 mm)



Adjustable Husky 2000, 2 in (50.8 mm)



LEAK DETECTOR





239128

239010


Notes


Notes

The Graco WarrantyGraco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in materialand workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of theequipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordancewith Graco’s written recommendations.

This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Gracocomponent parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance or structures,accessories, equipment or materials not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification ofthe claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned tothe original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will bemade at a reasonable charge, which charges may include the costs of parts, labor, and transportation.

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TOWARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental orconsequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE INCONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO. These items sold, butnot manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will providepurchaser with reasonable assistance in making any claim for breach of these warranties.

In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or thefurnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligenceof Graco, or otherwise.

FOR GRACO CANADA CUSTOMERS

The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into,given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que larédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés à la suite deou en rapport, directement ou indirectement, avec les procedures concernées.

Equipment Misuse HazardGeneral Misuse: Any misuse of Graco equipment or accessories, such as over-pressurizing, modifying parts, using incompatiblechemicals and fluids, or using worn or damaged parts, can cause them to rupture. Misuse of equipment can result in fluid injection, splashing in the eyes or on the skin, or other serious bodily injury, or fire, explosion or property damage. NEVER alter or modify any part of Graco equipment; doing so could cause the product to malfunction. CHECK all equipment regularly and repairor replace worn or damaged parts immediately. Always wear protective eye wear, gloves, clothing and respirator as recommended by fluid and solvent manufacturers.

System Pressure: Be sure that all equipment and accessories used are rated to withstand the applicable MAXIMUM WORKING PRESSURE. DO NOT exceed the maximum working pressure of any component or accessory used in a system.

Fluid and Solvent Compatibility: All chemicals used in a Graco sprayer must be compatible with wetted parts. Consult your chemical supplier to ensure compatibility. Do not use 1:1:1-trichloroethane, methylene chloride, other halogenated hydrocarbon sol-vents or fluids containing such solvents in this equipment, which contains aluminum and/or zinc parts. Such use could result in aserious chemical reaction, with the possibility of explosion, which could cause death, serious bodily injury and/or substantial property damage.

ABOUT GRACO

P R O V E N Q U A L I T Y . L E A D I N G T E C H N O L O G Y .

Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco productsmove, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehiclelubrication, commercial and industrial settings.

The company’s success is based on its unwavering commitment to technical excellence, world-class manufacturing and unparalleled customer service. Working closely with qualified distributors, Gracooffers systems, products and technology which set the quality standard in a wide range of fluid handlingsolutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication, and dispensing sealants and adhesives, along with power application equipment for thecontractor industry. Graco’s ongoing investment in fluid management and control will continue to provideinnovative solutions to a diverse global market.

©2001-2004 Graco Inc. 300435 Rev. F 12/04 Printed in U.S.A. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Sales/Distribution/Service North AmericaIndustrial Customer Service 800-328-0211Industrial product Information/Demonstration1-877-84GRACO (1-877-844-7226)FAX 612-378-3597

Graco Inc. is registered to I.S. EN ISO 9001

GRACO HEADQUARTERS

All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.

AMERICAS

MINNESOTAWorldwide HeadquartersGraco Inc.88-11th Avenue N.E.Minneapolis, MN 55413

MAILING ADDRESSP.O. Box 1441Minneapolis, MN 55440-1441Tel 612 623-6000Fax 612 623-6777

EUROPE

BELGIUMEuropean HeadquartersGraco N.V.Industrieterrein - Oude BundersSlakweidestraat 313630 Maasmechelen, BelgiumTel 32 89 770 700Fax 32 89 770 777

ASIA PACIFIC

JAPANGraco K.K.1-27-12 HayabuchiTsuzuki-kuYokohama City, Japan 2240025Tel 81 45 593 7300Fax 81 45 593 7301

CHINAGraco Hong Kong Ltd.Representative Office Room 118 1st FloorNo. 2 Xin Yuan BuildingNo. 509 Cao Bao RoadShanghai, P.R.China 200233Tel 86 21 649 50088Fax 86 21 649 50077

KOREAGraco Korea Inc.Choheung Bank Bldg, 4th Floor#1599, Gwanyang-Dong, Dongan-Ku Anyang-Si, Gyunggi-Do, Korea431-060Tel 82 31 476 9400 Fax 82 31 476 9801

GRACO INC.P.O. Box 1441Minneapolis, MN 55440-1441

Call today for product information or to request a demonstration.

1.877.84GRACO (1-877-844-7226) or visit us at www.graco.com.

PRO

CESS

Documents

PROCESS EQUIPMENT BUYER’S GUIDE - GRISAgrisa.com.mx/web/images/pdf/GRACO/Catalogo Completo GRACO...PROCESS EQUIPMENT BUYER’S GUIDE PROCESS EQUIPMENT CATALOG1 Table of Contents