Upload
dinhxuyen
View
231
Download
0
Embed Size (px)
Citation preview
Procedure Trolleys & Carts - 2012
Procedure Trolleys & Carts Caretray Trolleys2
email: [email protected] fax: +44 (0)1258 455056
• Low level single column easy clean procedure trolley, designed for improved and complete cleaning (including steam cleaning)
• Seamlessly welded one piece frame from 304 grade stainless steel (requires no on-site assembly)
• Quick and complete removal of top and side panels provides access to all areas for cleaning
• Recessed plastic top (max load 30kg)• Moulded side panels incorporate runners with positive stops, preventing trays
from being accidentally withdrawn• ‘Carerail’ fitted to each side of the trolley to support a wide range of
accessories (see options)• 100/160mm deep translucent high impact plastic trays with integral handle
(max load per tray 5kg)• Each tray is supplied with plastic clip on label cover & four removable dividers
(2 x long & 2 x short)• Each trolley is supplied with perforated coloured label strips (white, blue, green,
yellow & red)• 100mm castors, 2 off braking
Features
Overall Dimensions (w x d x h)
• 500 x 500 x 575mm
Standard Colours
• Stainless Steel
Item Description Weight
ECT108NH No Trays 13.8kg
ECT108NH1S2L 1 x 100mm, 2 x 160mm Trays 18.6kg
ECT108NH3L 3 x 160mm Trays 19.3kg
ECT108NH3S1L 3 x 100mm, 1 x 160mm Trays 19.2kg
ECT108NH4S 4 x 100mm Trays 18.5kg
Caretray Trolleys - Low Level, Single Column, Easy Clean
Options
• An extensive range of options are available to allow users to configure the trolley to suit their specific requirements; ie Lift up Flap, Sharps Box Holder etc. See pages14 for more details
ECT108NH3S1L
ECT108NH3S1L - Shown with optional CT901, CT909, CT906 and CT910
ECT108NH - Top and side panels can easily be removed to aid cleaningECT108NH - Top and side panels can
Procedure Trolleys & Carts
ECT108NH3S1L
See Page 14
For Options
Steam
Cleaning
Compatible
Caretray Trolleys Procedure Trolleys & Carts 3
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• Low level single column easy clean procedure trolley, designed for improved and complete cleaning (including steam cleaning)
• Seamlessly welded one piece frame from 304 grade stainless steel (requires no on-site assembly)
• Quick and complete removal of top and side panels provides access to all areas for cleaning
• Recessed plastic top (max load 30kg)• Moulded side panels incorporate runners with positive stops, preventing trays
from being accidentally withdrawn• ‘Carerail’ fitted to each side of the trolley to support a wide range of
accessories (see options)• 100/160mm deep translucent high impact plastic trays with integral handle
(max load per tray 5kg)• Each tray is supplied with plastic clip on label cover & four removable dividers
(2 x long & 2 x short)• Each trolley is supplied with perforated coloured label strips (white, blue, green,
yellow & red)• 100mm castors, 2 off braking
Features
Overall Dimensions (w x d x h)
• 955 x 500 x 785mm
Standard Colours
• Stainless Steel
Item Description Weight
ECT208NH No Trays 21.0kg
ECT208NH3S4L 3 x 100mm Trays, 4 x 160mm Trays 32.0kg
ECT208NH4S3L 4 x 100mm Trays, 3 x 160mm Trays 31.4kg
ECT208NH6L 6 x 160mm Trays 32.1kg
ECT208NH6S2L 6 x 100mm Trays, 2 x 160mm Trays 31.9kg
ECT208NH7S1L 7 x 100mm Trays, 1 x 160mm Trays 31.2kg
ECT208NH8S 8 x 100mm Trays 30.6kg
Caretray Trolleys - Low Level, Double Column,Easy Clean
ECT2084S3L
ECT208NH4S3L - Shown with optional CT901, CT909, CT906 and CT910
ECT208NH - Top and side panels can easily be removed to aid cleaning
ECT2084S3L
Options
• An extensive range of options are available to allow users to configure the trolley to suit their specific requirements; ie Lift up Flap, Sharps Box Holder etc. See pages 14 for more details
See Page 14
For Options
Steam
Cleaning
Compatible
Procedure Trolleys & Carts Caretray Trolleys4
email: [email protected] fax: +44 (0)1258 455056
• Single column easy clean procedure trolley, designed for improved and complete cleaning (including steam cleaning)
• Seamlessly welded one piece frame from 304 grade stainless steel (requires no on-site assembly)
• Quick and complete removal of top and side panels provides access to all areas for cleaning
• Recessed plastic top (max load 30kg)• Moulded side panels incorporate runners with positive stops, preventing trays
from being accidentally withdrawn• ‘Carerail’ fitted to each side of the trolley to support a wide range of
accessories (see options)• 100/160mm deep translucent high impact plastic trays with integral handle
(max load per tray 5kg)• Each tray is supplied with plastic clip on label cover & four removable dividers
(2 x long & 2 x short)• Each trolley is supplied with perforated coloured label strips (white, blue, green,
yellow & red)• 100mm castors, 2 off braking
Features
Overall Dimensions (w x d x h)
• 500 x 500 x 950mm
Standard Colours
• Stainless Steel
Item Description Weight
ECT110NH No Trays 16.8kg
ECT110NH1S3L 1 x 100mm, 3 x 160mm Trays 23.7kg
ECT110NH3S2L 3 x 100mm, 2 x 160mm Trays 24.2kg
ECT110NH4L 4 x 160mm Trays 24.3kg
ECT110NH4S1L 4 x 100mm, 1 x 160mm Trays 23.5kg
ECT110NH6S 6 x 100mm Trays 24.1kg
Caretray Trolleys - Single Column, Easy Clean
Options
• An extensive range of options are available to allow users to configure the trolley to suit their specific requirements; ie Lift up Flap, Sharps Box Holder etc. See pages 14 for more details
ECT110NH3S2L
ECT110NH3S2L - Shown with optional CT909, CT906 and CT910
ECT110NH - Top and side panels can easily be removed to aid cleaning
Procedure Trolleys & Carts
ECT110NH3S2L
ECT110NH - Top and side panels can
See Page 14
For Options
Steam
Cleaning
Compatible
Caretray Trolleys Procedure Trolleys & Carts 5
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• Single column easy clean procedure trolley, designed for improved and complete cleaning (including steam cleaning)
• Seamlessly welded one piece frame from 304 grade stainless steel (requires no on-site assembly)
• Quick and complete removal of top and side panels provides access to all areas for cleaning
• Recessed plastic top (max load 30kg)• Moulded side panels incorporate runners with positive stops, preventing trays
from being accidentally withdrawn• ‘Carerail’ fitted to each side of the trolley to support a wide range of
accessories (see options)• 100/160mm deep translucent high impact plastic trays with integral handle
(max load per tray 5kg)• Each tray is supplied with plastic clip on label cover & four removable dividers
(2 x long & 2 x short)• Each trolley is supplied with perforated coloured label strips (white, blue, green,
yellow & red)• 100mm castors, 2 off braking
Features
Overall Dimensions (w x d x h)
• 955 x 500 x 950mm
Standard Colours
• Stainless Steel
Item Description Weight
ECT210NH No Trays 25.4kg
ECT210NH3S6L 3 x 100mm, 6 x 160mm trays 40.5kg
ECT210NH4S5L 4 x 100mm, 5 x 160mm Trays 39.8kg
ECT210NH5S4L 5 x 100mm, 4 x 160mm Trays 39.5kg
ECT210NH6S4L 6 x 100mm, 4 x 160mm Trays 40.3kg
ECT210NH8L 8 x 160mm Trays 40.5kg
ECT210NH8S2L 8 x 100mm, 2 x 160mm Trays 39.0kg
Caretray Trolleys - Double Column, Easy Clean
ECT210NH6S4L
ECT210NH6S4L - Shown with optional CT912, CT901, CT909, CT906 and CT910
ECT210NH - Top and side panels can easily be removed to aid cleaning
ECT210NH6S4L
Options
• An extensive range of options are available to allow users to configure the trolley to suit their specific requirements; ie Lift up Flap, Sharps Box Holder etc. See pages 14 for more details
See Page 14
For Options
Steam
Cleaning
Compatible
Procedure Trolleys & Carts Caretray Trolleys6
email: [email protected] fax: +44 (0)1258 455056
• Low level single column procedure trolley• One piece welded frame (requires no on-site assembly)• Quick and complete removal of top and side panels provides access to all
areas for cleaning• Recessed plastic top (max load 30kg)• Moulded side panels incorporate runners with positive stops, preventing trays
from being accidentally withdrawn• ‘Carerail’ fitted to each side of the trolley to support a wide range of
accessories (see options)• 100/160mm deep translucent high impact plastic trays with integral handle
(max load per tray 5kg)• Each tray is supplied with plastic clip on label cover & four removable dividers
(2 x long & 2 x short)• Each trolley is supplied with perforated coloured label strips (white, blue, green,
yellow & red)• Ring buffers• 100mm castors, 2 off braking
Features
Overall Dimensions (w x d x h)
• 575 x 575 x 785mm
Standard Colours
• Paint - Spearmint
Item Description Weight
CT108NH No Trays 13.8kg
CT108NH1S2L 1 x 100mm, 2 x 160mm Trays 18.6kg
CT108NH3L 3 x 160mm Trays 19.3kg
CT108NH3S1L 3 x 100mm, 1 x 160mm Trays 19.2kg
CT108NH4S 4 x 100mm Trays 18.5kg
Caretray Trolleys - Low Level, Single Column
Options
• An extensive range of options are available to allow users to configure the trolley to suit their specific requirements; ie Lift up Flap, Sharps Box Holder etc. See pages 14 for more details
CT108NH3S1L
Procedure Trolleys & Carts
CT108NH3S1L
CT108NH3S1L - Shown with optional CT901, CT909, CT906 and CT910
CT108NH - Top and side panels can easily be removed to aid cleaning
See Page 14
For Options
Other Frame Colours Available
Caretray Trolleys Procedure Trolleys & Carts 7
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• Low level double column procedure trolley• One piece welded frame (requires no on-site assembly)• Quick and complete removal of top and side panels provides access to all
areas for cleaning• Recessed plastic top (max load 30kg)• Moulded side panels incorporate runners with positive stops, preventing trays
from being accidentally withdrawn• ‘Carerail’ fitted to each side of the trolley to support a wide range of
accessories (see options)• 100/160mm deep translucent high impact plastic trays with integral handle
(max load per tray 5kg)• Each tray is supplied with plastic clip on label cover & four removable dividers
(2 x long & 2 x short)• Each trolley is supplied with perforated coloured label strips (white, blue, green,
yellow & red)• Ring buffers• 100mm castors, 2 off braking
Features
Overall Dimensions (w x d x h)
• 1030 x 575 x 785mm
Standard Colours
• Paint - Spearmint
Item Description Weight
CT208NH No Trays 21.0kg
CT208NH3S4L 3 x 100mm Trays, 4 x 160mm Trays 32.0kg
CT208NH4S3L 4 x 100mm Trays, 3 x 160mm Trays 31.4kg
CT208NH6L 6 x 160mm Trays 32.1kg
CT208NH6S2L 6 x 100mm Trays, 2 x 160mm Trays 31.9kg
CT208NH7S1L 7 x 100mm Trays, 1 x 160mm Trays 31.2kg
CT208NH8S 8 x 100mm Trays 30.6kg
Caretray Trolleys - Low Level, Double Column
CT208NH4S3LCT208NH4S3L
CT208NH4S3L - Shown with optional CT901, CT909, CT906 and CT910
CT208NH -Top and side panels can easily be removed to aid cleaning
Options
• An extensive range of options are available to allow users to configure the trolley to suit their specific requirements; ie Lift up Flap, Sharps Box Holder etc. See pages 14 for more details
See Page 14
For Options
Other Frame Colours Available
Procedure Trolleys & Carts Caretray Trolleys8
email: [email protected] fax: +44 (0)1258 455056
• Single column procedure trolley• One piece welded frame (requires no on-site assembly)• Quick and complete removal of top and side panels provides access to all
areas for cleaning• Recessed plastic top (max load 30kg)• Moulded side panels incorporate runners with positive stops, preventing trays
from being accidentally withdrawn• ‘Carerails’ fitted to each side of the trolley to support a wide range of
accessories (see options)• 100/160mm deep translucent high impact plastic trays with integral handle
(max load per tray 5kg)• Each tray is supplied with plastic clip on label cover & four removable dividers
(2 x long & 2 x short)• Each trolley is supplied with perforated coloured label strips (white, blue, green,
yellow & red)• Ring buffers• 100mm castors, 2 off braking
Features
Overall Dimensions (w x d x h)
• 575 x 575 x 950mm
Standard Colours
• Paint - Spearmint
Item Description Weight
CT110NH No Trays 16.8kg
CT110NH1S3L 1 x 100mm, 3 x 160mm Trays 23.7kg
CT110NH3S2L 3 x 100mm, 2 x 160mm Trays 24.2kg
CT110NH4L 4 x 160mm Trays 24.3kg
CT110NH4S1L 4 x 100mm, 1 x 160mm Trays 23.5kg
CT110NH6S 6 x 100mm Trays 24.1kg
Caretray Trolleys - Single Column
Options
• An extensive range of options are available to allow users to configure the trolley to suit their specific requirements; ie Lift up Flap, Sharps Box Holder etc. See pages 14 for more details
CT110NH3S2L
CT110NH3SL - Shown with optional CT901, CT909, CT906 and CT910
CT110NH - Top and side panels can easily be removed to aid cleaning
CT110NH3S2L
CT110NH - Top and side panels can
See Page 14
For Options
Other Frame Colours Available
Caretray Trolleys Procedure Trolleys & Carts 9
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• Double column procedure trolley• One piece welded frame (requires no on-site assembly)• Quick and complete removal of top and side panels provides access to all
areas for cleaning• Recessed plastic top (max load 30kg)• Moulded side panels incorporate runners with positive stops, preventing trays
from being accidentally withdrawn• ‘Carerails’ fitted to each side of the trolley to support a wide range of
accessories (see options)• 100/160mm deep translucent high impact plastic trays with integral handle
(max load per tray 5kg)• Each tray is supplied with plastic clip on label cover & four removable dividers
(2 x long & 2 x short)• Each trolley is supplied with perforated coloured label strips (white, blue, green,
yellow & red)• Ring buffers• 100mm castors, 2 off braking
Features
Overall Dimensions (w x d x h)
• 1030 x 575 x 950mm
Standard Colours
• Paint - Spearmint
Item Description Weight
CT210NH No Trays 25.1kg
CT210NH3S6L 3 x 100mm, 6 x 160mm Trays 40.2kg
CT210NH4S5L 4 x 100mm, 5 x 160mm Trays 39.5kg
CT210NH5S4L 5 x 100mm, 4 x 160mm Trays 39.2kg
CT210NH6S4L 6 x 100mm, 4 x 160mm Trays 40.0kg
CT210NH8L 8 x 160mm Trays 40.2kg
CT210NH8S2L 8 x 100mm, 2 x 160mm Trays 38.7kg
Caretray Trolleys - Double Column
CT210NH6S4L
CT210NH6S4L - Shown with optional CT901, CT909, CT906 and CT910
CT210NH - Top and side panels can easily be removed to aid cleaning
Procedure Trolleys & Carts
CT210NH6S4L
Options
• An extensive range of options are available to allow users to configure the trolley to suit their specific requirements; ie Lift up Flap, Sharps Box Holder etc. See pages 14 for more details
See Page 14
For Options
Other Frame Colours Available
Procedure Trolleys & Carts Caretray Trolleys10
email: [email protected] fax: +44 (0)1258 455056
• Single column procedure trolley• One piece welded frame incorporating bow handles (requires no on-site
assembly)• Quick and complete removal of top and side panels provides access to all
areas for cleaning• Recessed plastic top (max load 30kg)• Moulded side panels incorporate runners with positive stops, preventing trays
from being accidentally withdrawn• ‘Carerails’ fitted to each side of the trolley to support a wide range of
accessories (see options)• 100/160mm deep translucent high impact plastic trays with integral handle
(max load per tray 5kg)• Each tray is supplied with plastic clip on label cover & four removable dividers
(2 x long & 2 x short)• Each trolley is supplied with perforated coloured label strips (white, blue, green,
yellow & red)• Ring buffers• 100mm castors, 2 off braking
Features
Overall Dimensions (w x d x h)
• 575 x 575 x 1045mm
Standard Colours
• Paint - Spearmint
Item Description Weight
CT110BH No Trays 16.8kg
CT110BH1S3L 1 x 100mm, 3 x 160mm Trays 23.7kg
CT110BH3S2L 3 x 100mm, 2 x 160mm Trays 24.2kg
CT110BH4L 4 x 160mm Trays 24.3kg
CT110BH4S1L 4 x 100mm, 1 x 160mm Trays 23.5kg
CT110BH6S 6 x 100mm Trays 24.1kg
Caretray Trolleys - Single Column, Bow Handles
Options
• An extensive range of options are available to allow users to configure the trolley to suit their specific requirements; ie Lift up Flap, Sharps Box Holder etc. See pages 14 for more details
CT110BH3S2L
CT110BH3S2L - Shown with optional CT901, CT909, CT906 and CT910
CT110BH - Top and side panels can easily be removed to aid cleaning
Procedure Trolleys & Carts
CT110BH3S2L
See Page 14
For Options
Other Frame Colours Available
Caretray Trolleys Procedure Trolleys & Carts 11
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• Double column procedure trolley• One piece welded frame incorporating bow handles (requires no on-site
assembly)• Quick and complete removal of top and side panels provides access to all
areas for cleaning• Recessed plastic top (max load 30kg)• Moulded side panels incorporate runners with positive stops, preventing trays
from being accidentally withdrawn• ‘Carerails’ fitted to each side of the trolley to support a wide range of
accessories (see options)• 100/160mm deep translucent high impact plastic trays with integral handle
(max load per tray 5kg)• Each tray is supplied with plastic clip on label cover & four removable dividers
(2 x long & 2 x short)• Each trolley is supplied with perforated coloured label strips (white, blue, green,
yellow & red)• Ring buffers• 100mm castors, 2 off braking
Features
Overall Dimensions (w x d x h)
• 1030 x 575 x 1045mm
Standard Colours• Paint - Spearmint
Item Description Weight
CT210BH No Trays 25.4kg
CT210BH3S6L 3 x 100mm, 6 x 160mm Trays 40.5kg
CT210BH4S5L 4 x 100mm, 5 x 160mm Trays 39.8kg
CT210BH5S4L 5 x 100mm, 4 x 160mm Trays 39.5kg
CT210BH6S4L 6 x 100mm, 4 x 160mm Trays 40.3kg
CT210BH8L 8 x 160mm Trays 40.5kg
CT210BH8S2L 8 x 100mm, 2 x 160mm Trays 39.0kg
Caretray Trolleys - Double Column, Bow Handles
CT210BH6S4L
CT2106S4L - Shown with optional CT901, CT909, CT906 and CT910
CT210BH - Top and side panels can easily be removed to aid cleaning
Procedure Trolleys & Carts 11
CT210BH6S4L
CT210BH - Top and side panels can
Options
• An extensive range of options are available to allow users to configure the trolley to suit their specific requirements; ie Lift up Flap, Sharps Box Holder etc. See pages 14 for more details
See Page 14
For Options
Other Frame Colours Available
Procedure Trolleys & Carts Caretray Trolleys12
email: [email protected] fax: +44 (0)1258 455056
• High level single column procedure trolley• One piece welded frame (requires no on-site assembly)• Quick and complete removal of top and side panels provides access to all
areas for cleaning• Recessed plastic top (max load 30kg)• Moulded side panels incorporate runners with positive stops, preventing trays
from being accidentally withdrawn• ‘Carerails’ fitted to each side of the trolley to support a wide range of
accessories (see options)• 100/160mm deep translucent high impact plastic trays with integral handle
(max load per tray 5kg)• Each tray is supplied with plastic clip on label cover & four removable dividers
(2 x long & 2 x short)• Each trolley is supplied with perforated coloured label strips (white, blue, green,
yellow & red)• Ring buffers• 100mm castors, 2 off braking
Features
Overall Dimensions (w x d x h)
• 575 x 575 x 1385mm
Standard Colours
• Paint - Spearmint
Item Description Weight
CT114NH No Trays 29.5kg
CT114NH2S5L 2 x 100mm, 5 x 160mm Trays 40.3kg
CT114NH3S4L 3 x 100mm, 4 x 160mm Trays 39.6kg
CT114NH4S3L 4 x 100mm, 3 x 160mm Trays 38.8kg
CT114NH6L 6 x 160mm Trays 39.6kg
Caretray Trolleys - High Level, Single Column
Options
• An extensive range of options are available to allow users to configure the trolley to suit their specific requirements; ie Lift up Flap, Sharps Box Holder etc. See pages 14 for more details
CT114NH6L
CT114NH6L - Shown with optional CT901, CT909, CT906 and CT910
CT114NH - Top and side panels can easily be removed to aid cleaning
Procedure Trolleys & Carts
CT114NH6L
CT114NH - Top and side panels can easily be removed to aid cleaning
CT114NH6L
See Page 14
For Options
Other Frame Colours Available
Caretray Trolleys Procedure Trolleys & Carts 13
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• High level double column procedure trolley• One piece welded frame (requires no on-site assembly)• Quick and complete removal of top and side panels provides access to all
areas for cleaning• Recessed plastic top (max load 30kg)• Moulded side panels incorporate runners with positive stops, preventing trays
from being accidentally withdrawn• ‘Carerails’ fitted to each side of the trolley to support a wide range of
accessories (see options)• 100/160mm deep translucent high impact plastic trays with integral handle
(max load per tray 5kg)• Each tray is supplied with plastic clip on label cover & four removable dividers
(2 x long & 2 x short)• Each trolley is supplied with perforated coloured label strips (white, blue, green,
yellow & red)• Ring buffers• 100mm castors, 2 off braking
Features
Overall Dimensions (w x d x h)
• 1030 x 575 x 1385mm
Standard Colours
• Paint - Spearmint
Item Description Weight
CT214NH No Trays 34.6kg
CT214NH2S10L 2 x 100mm, 10 x 160mm Trays 58.5kg
CT214NH6S8L 6 x 100mm, 8 x 160mm Trays 59.8kg
CT214NH10S6L 10 x 100mm, 6 x 160mm Trays 61.2kg
CT214NH12L 12 x 160mm Trays 59.8kg
CT214NH16S2L 16 x 100mm, 2 x 160mm Trays 61.2kg
Caretray Trolleys - High Level, Double Column
CT214NH10S6L
CT214NH10S6L - Shown with optional CT901, CT909, CT906 and CT910
CT214NH - Top and side panels can easily be removed to aid cleaning
Procedure Trolleys & Carts
CT214NH10S6L
CT214NH10S6L - Shown with optional CT214NH - Top and side panels can
Options
• An extensive range of options are available to allow users to configure the trolley to suit their specific requirements; ie Lift up Flap, Sharps Box Holder etc. See pages 14 for more details
See Page 14
For Options
Other Frame Colours Available
Procedure Trolleys & Carts Caretray Trolley Options & Accessories14
email: [email protected] fax: +44 (0)1258 455056
• Compatible AD, CD, DD, PD, RD, ZD & E cylinders, max diameter 100mm
• Cylinder held in position using a chain, whilst rubber pads protect wear points/reduce noise
• Attaches to carerails
Features
Standard Colours
• White
Item Description
CT904 C/CD Size
Cylinder Holder - C/CD Size
• Internal dimensions of holder 95 x 50 x 510mm
• Outer sleeve removable for cleaning• Fitted with a 15mm square hook• Attaches to upper/lower carerails
Features
Overall Dimensions (w x d x h)
• 125 x 70 x 555mm
Item Description Weight
CT905 Airway Tube Holder 1.5kg
Airway Tube Holder
• Accepts bottles with maximum 90 x 90mm square base
• Fitted with a 15mm hook• Attaches to upper/lower carerails
Features
Standard colours
• White/Stainless Steel
Item Description Overall Dimensions Weight
CT906 Mild Steel 95 x 110 x 115mm 0.4kg
CT907 Stainless Steel 95 x 110 x 115mm 0.4kg
Alcohol Gel Holder
• Fold down flap (provides work area 305 x 430mm)• Attaches to upper carerail
Features
Standard Colours
• White
Item Description Weight
CT901 Work Flap 3.1kg
Work Flap
• Two hook infusion pole & bracket(pole length 1160mm)
• Attaches to upper carerail• Compatible with ECT110, ECT210, CT110 & CT210
Features
Standard Colours
• Paint - White
Item Description Weight
CT902 Infusion Pole & Bracket 1.5kg
Infusion Pole & Bracket
• Chartboard with single sprung clip (usable area 500 x 540mm)
• Angle adjustable (15-45 degrees)• Factory fitted
Features
Standard Colours
• White
Item Description Weight
CT903 Chartboard 5.1kg
Chartboard
Standard Colours
• Paint - White
Caretray Trolley Options & Accessories Procedure Trolleys & Carts 15
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• 15 litre stainless steel bucket & bracket• Attaches to upper/lower carerails
Features
Overall Dimensions
• 450 x 360 x 400mm
Item Description Weight
CT911 Bracket & Stainless Steel Bucket 2.8kg
Bracket & Stainless Steel Bucket
• 7 litre stainless steel bowl & bracket• Attaches to upper/lower carerails
Features
Overall Dimensions (w x d x h)
• 450 x 360 x 120mm
Item Description Weight
CT912 Bracket & Stainless Steel Bowl 2.0kg
Bracket & Stainless Steel Bowl
• Height adjustable fixed angle laptop holder• Cut outs on sides allow access to ports, i.e. USB• Attaches to two carerails• Compatible with 110 & 210 models
Features
Standard colours
• Paint - White
Item Description Overall Dimensions Weight
CT913 Laptop Holder 445 x 275 x 720mm 3.6kg
Laptop Holder
• Adjustable to accommodate boxes ranging from 110 -150mm in width
• Fitted with a 15mm hook• Attaches to upper/lower carerails
Features
Standard Colours
• Paint - White
Item Description Overall Dimensions Weight
CT908 G`love Box Holder 120 x 110 x 180mm 0.5kg
Glove Box Holder, Adjustable
• Accepts maximum seven litre capacity sharps boxes• Sharps box secured using a velcro strap• Fitted with a 15mm square hook• Attaches to upper/lower carerails
Features
Standard Colours
• Paint - White
Item DescriptionDimensions( w x d x h) Weight
CT909 Sharps Box Holder 125 x 100 x 170mm 0.4kg
Sharps Box Holder
• Plastic debris bin & bracket (internal dims 200 x 135 x 100mm)
• Fitted with a 15mm hook• Attaches to upper/lower carerails
Features
Standard Colours
• Paint - White
Item Description Weight
CT910 Bracket & Debris Bin 1.4kg
Bracket & Debris Bin
Bracket & Stainless Steel Bowl
Procedure Trolleys & Carts Caretray Trolley Options & Accessories16
email: [email protected] fax: +44 (0)1258 455056
• Suitable for A4 ring binders or foolscap notes (pocket size 260 x 65mm)
• Open front design allows for easy patient identification
• Fitted with a 15mm hook• Attaches to upper/lower carerails
Features
Standard Colours
• Paint - White
Item Description Overall Dimensions Weight
CB/9/15 Chart Holder 270 x 85 x 410mm 1.4kg
Chart Holder - 15mm Square Hook
• Pull out shelf (provides work area 375 x 430mm)• Maximum load 5kg
Features
Standard Colours
• White
Item Description Weight
CT/SHELF Shelf 1.2kg
Shelf• Internal dimensions of each section 65 x 75 x 405mm• Removable clear perspex panel to aid cleaning• Fitted with a 15mm square hook• Attaches to upper/lower carerails
Features
Standard colours
• Paint - White
Item Description Overall Dimensions Weight
RC/2/15 Two Section 135 x 115 x 410mm 1.35kg
RC/5/15 Five Section 320 x 115 x 410mm 3.36kg
Catheter Racks
• Replacement bracket• Compatible with: CT912, CT913, CT902
Features
Standard Colours
• Paint - White
Item Description Overall Dimensions Weight
CT914 Bracket 65 x 50 x 170mm 0.6kg
Bracket
• Angled push handle• Attaches to upper carerail• Compatible with 110 & 210 models
Features
Standard Colours
• Paint - White
Item Description Overall Dimensions Weight
CT915 Handle 460 x 90 x 110mm 1.2kg
Handle
• Switched and fused• Supplied with 5 metres of orange cable and fitted
with UK 3 pin plug• Fitted to the rear of the trolley, cleat secures cable
when not in use• Factory fitted
Features
Item Description Weight
CT916 Four Gang Socket 1.5kg
Four Gang Socket
Chart Holder - 15mm Catheter Racks
Caretray Trolley Options & Accessories
Caretray Trolley Options & Accessories Procedure Trolleys & Carts 17
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• Stainless steel recessed & flush tops• Fitted in place of the standard
recessed plastic top• Factory fitted
Features
Standard Colours
• Stainless Steel
Item Description
CT930 Flush Top (CT110BH)
CT931 Flush Top (CT108NH, CT110NH & CT114NH)
CT932 Flush Top (CT210BH)
CT933 Flush Top (CT208NH, CT210NH & CT214NH)
CT934 Recessed Top (CT108NH, CT110NH, CT110BH & CT114NH)
CT935 Recessed Top (CT208NH, CT210NH, CT210BH & CT214NH)
Recessed/Flush Top - Stainless Steel
• Protects trays from ingress of dust (sides of trolley concealed by side panels)• Held in position using velcro to trolley uprights
Features
Standard Colours
• Blue
Item Description
CT940 Nylon Cover (CT108NH)
CT941 Nylon Cover (CT208NH)
CT942 Nylon Cover (CT110BH)
CT943 Nylon Cover (CT110NH)
CT944 Nylon Cover (CT210BH)
CT945 Nylon Cover (CT210NH)
Nylon Cover
• Doors fold back against sides of trolley when open• Trolley also fitted with a solid back/secure top
(standard)• Factory fitted
Features
Standard Colours
• Paint - White
Item Description
CT950 Door (CT108NH)
CT951 Door (CT110NH & CT110BH)
CT952 Doors (CT208NH)
CT953 Doors (CT210NH & CT210BH)
CT954 Door (CT114NH)
CT955 Doors (CT214NH)
Lockable Door
• 100/160mm deep translucent high impact plastic trays with integral handle (max load per tray 5kg)
• Each tray is supplied with plastic clip on label cover & four removable dividers (2 x long & 2 x short)
Features
Item Description
CT/TRAY/100 100mm Deep Tray - Two Short/Two Long Dividers
CT/TRAY/160 160mm Deep Tray - Two Short/Two Long Dividers
Additional Trays
Dimensions
• 100mm Deep Tray - 360 x 430 x 100mm (internal)
• 160mm Deep Tray - 360 x 430 x 160mm (internal)
Protects trays from ingress of dust (sides of trolley concealed by side panels)Held in position using velcro to trolley uprights
Nylon Cover (CT108NH)
Nylon Cover (CT208NH)
Nylon Cover (CT110BH)
Nylon Cover (CT110NH)
Nylon Cover (CT210BH)
Nylon Cover (CT210NH)
•
•
Features
Item
CT/TRAY/100
CT/TRAY/160
Dimensions
•
•
Doors fold back against sides of trolley when openTrolley also fitted with a solid back/secure top
Recessed/Flush Top - Stainless Steel
100/160mm deep translucent high impact plastic trays with integral handle (max load per tray 5kg)Each tray is supplied with plastic clip on label cover & four removable dividers (2 x long & 2 x
100mm Deep Tray - Two Short/Two Long Dividers
160mm Deep Tray - Two Short/Two Long Dividers
Procedure Trolleys & Carts Caretray Racks18
email: [email protected] fax: +44 (0)1258 455056
• Single & double column storage racks• One piece welded frame (requires no on-site assembly)• Quick and complete removal of top and side panels provides access to all
areas for cleaning• Recessed plastic top (max load 30kg)• Moulded side panels incorporate runners with positive stops, preventing trays
from being accidentally withdrawn• 100/160mm deep translucent high impact plastic trays with integral handle
(max load per tray 5kg)• Each tray is supplied with plastic clip on label cover & four removable dividers
(2 x long & 2 x short)• Each rack is supplied with perforated coloured label strips (white, blue, green,
yellow & red)• Adjustable feet to allow independent levelling on uneven floors• Supplied with a bracket to allow secure fixing to the wall
Standard Colours
• Paint - Spearmint
Caretray Racks - High Level, Single & Double Column
CT1166S4LCT21612S8L
Features
CT21612S8LCT1166S4L
Options
• CT/SHELF - Shelf• CT/TRAY/100 - 100mm Deep Tray - Two Short/Two Long Dividers• CT/TRAY/160 - 160mm Deep Tray - Two Short/Two Long Dividers
Item Description Weight
Single Column - 480 x 535 x 1605mm (w x d x h)
CT116 No Trays 38.0kg
CT1162S6L 2 x 100mm, 6 x 160mm Trays 53.4kg
CT1164S5L 4 x 100mm, 5 x 160mm Trays 54.1kg
CT1166S4L 6 x 100mm, 4 x 160mm Trays 54.8kg
CT1169S2L 9 x 100mm, 2 x 160mm Trays 54.8kg
CT11612S 12 x 100mm Trays 54.8kg
CT1168L 8 x 160mm Trays 54.8kg
Double Column - 940 x 535 x 1605mm (w x d x h)
CT216 No Trays 62.6kg
CT2162S14L 2 x 100mm, 14 x 160mm Trays 109.2kg
CT2166S12L 6 x 100mm, 12 x 160mm Trays 110.4kg
CT2168S10L 8 x 100mm, 10 x 160mm Trays 109.2kg
CT21612S8L 12 x 100mm, 8 x 160mm Trays 110.6kg
CT21624S 24 x 100mm Trays 110.6kg
CT21616L 16 x 160mm Trays 110.6kg
CT/TRAY/160 - 160mm Deep Tray - Two Short/Two Long Dividers
CT/TRAY/100
CT/TRAY/160
CT/SHELF
Plaster Trolleys Procedure Trolleys & Carts 19
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• Seamlessly welded easy clean stainless steel plaster trolley (304 grade)• One, Two or Three drawer versions with integral bucket ring (supplied with a 15
litre stainless steel bucket)• 100mm antistatic non marking castors
Dimensions (w x d x h)
• Overall Dimensions - 1150 x 540 x 915mm• Drawers - 650 x 410 x 100mm (internal)• Work Surface - 745 x 515 at height 915mm• Lower Shelf - 746 x 515 at height 175mm
Standard Colours
• Stainless
Item Description Weight
WT/96/1/SS One Drawer & Bucket 33.0kg
WT/96/2/SS Two Drawers & Bucket 42.0kg
WT/96/3/SS Three Drawers & Bucket 51.0kg
Plaster Trolley - Stainless Steel
WT/96/3/SS
Features
Description Weight
Seamlessly welded easy clean stainless steel plaster trolley (304 grade)One, Two or Three drawer versions with integral bucket ring (supplied with a 15
WT/96/3/SS
Weight
Options
• WT/96/FLAP - Lift Up Flap• WT/96/SS/LP - Louver Panel• 2PLCO024 - Plastic Lin Bin• ZP010 - Ring Buffers• CAM - Camlock
WT/96/3/SS with optional flap, louver panel & bins
Procedure Trolleys & Carts Procedure Carts20
email: [email protected] fax: +44 (0)1258 455056
• Range of pre-configured carts to suit a wide range of applications• Lightweight polymer construction with smooth rounded corners to assist
cleaning• Upper work surface provides a writing surface/space for preparation work• Three locking options (CAM/electronic locking & security seal compatible)• Full extension lightweight polymer drawers, depths 76, 152, 229mm (max load
24kg)• Incorporates Microban offering antimicrobial protection• Two tone colour keyway, drawer handles available in a range of colours• 125mm castors, 2 off braking
Features
Standard Colours
• Body - Light Taupe• Drawers - Light Taupe/Model Dependant
Item Description Overall Dimensions ( w x d x h) Weight
8FLCRP4 Emergency Cart - 3 x 76mm, 2 x 152mm, 1 x 229mm Drawers, Code Blue Handles, Security Seal Lock 1056 x 607 x 1273mm 91.0kg
8FLPED1 Paediatric Emergency Cart - 8 x 76mm, 1 x 152mm Drawers, Coloured Handles, Security Seal Lock 1056 x 607 x 1273 91.0kg
8FLTMENT2 Treatment Cart - 2 x 76mm, 2 x 152mm, 1 x 229mm Drawers, Slate Blue Handles, CAM Lock 819 x 568 x 1064mm 51.0kg
8FLCOM-LT Laptop Cart - 1 x Keyboard Tray, 1 x 76mm, 2 x 152mm, 1 x 229mm Drawers, Slate Blue Handles, Keyless Entry Touch Pad 819 x 568 x 1064mm 83.0kg
8FLCLINE Central Line Cart - 3 x 76mm, 2 x 152mm, 1 x 229mm Drawers, Dark Taupe Handles, Keyless Entry Touch Pad 819 x 568 x 1064mm 91.0kg
8FLCCU1 Critical Care Cart - 3 x 76mm, 2 x 152mm, 1 x 229mm Drawers, Red Handles, Keyless Entry Touch Pad 840 x 569 x 1807mm 90.0kg
Procedure Carts - Polymer, Metro Flexline™
Options
• 8FL190 - Drawer Label Holders (x 10)
Dimensions (w x d x h)
• Drawers - 514 x 432 x 76/152/229mm (internal)
8FLPED18FLPED18FLCOM-LT
This is a small
selection of a large
configurable range.
Please contact
our customer services
team to discuss your
requirements
Procedure Carts Procedure Trolleys & Carts 21
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
Emergency8FLCRP4
Paediatric Emergency 8FLPED1
Treatment8FLTMENT2
Laptop8FLCOM-LT
Central Line8FLCLINE
Critical Care 8FLCCU1
76mm Drawer Divider Kit 2 2
152/229mm Drawer Divider Kit 2 1
76mm Drawer Divider Tray & Dividers 3
152mm Drawer Divider Tray & Dividers 2
Side Bin, Locking 4 2 4
Side Bin, Non-Locking 3 2 4
Waste Basket (28 Litre)
Oxygen Cylinder Holder
Lockable Sharps Container
Cord Manager
Adjustable Defibrillator Tray
Hospital Grade 6, Outlet Strip & Holder
Suction Pump Shelf
Rear Fitting Backboard
Laptop Arm
Pull Out Side Shelf
Two Hook Infusion Pole
Plastic Security Seals, (x 100)
Drawer Seal Lock Bar
Lock Alert VI – Auto Lock
Overbridge with Top Shelf & Hanger Rail
Six Compartment Tilt Bin for Overbridge
Procedure Trolleys & Carts Procedure Carts22
email: [email protected] fax: +44 (0)1258 455056
• Range of pre-configured carts to suit a wide range of applications• Lightweight polymer construction with smooth rounded corners to assist
cleaning• Upper work surface provides a writing surface/space for preparation work• Five locking options, (electronic touchpad/pushbutton/keyless, CAM &
security seal compatible)• Full extension lightweight polymer drawers, depths 76, 152, 229mm (max load
11/18kg)• Incorporates Microban offering antimicrobial protection• Two tone colour keyway, drawer handles available in a range of colours• 125mm castors, 2 off braking
Features
Standard Colours
• Body - Light Taupe• Drawer Handles - Dark Taupe/Model Dependant
Item Description Overall Dimensions (w x d x h) Weight
8SXRSANES Anesthesia Cart - 4 x 152mm, 1 x 229mm Drawers, Dark Taupe Handles, CAM Lock 882 x 633 x 1136mm 104.0kg
8SXRSDRS Dressing Cart - 3 x 76mm, 2 x 152mm, 1 x 229mm Drawers, Dark Taupe Handles, CAM Lock 577 x 633 x 1060mm 83.0kg
8SXRSTRAMA Trauma Cart - 3 x 76mm, 4 x 152mm Drawers, Slate Blue Handles, CAM Lock 882 x 633 x 1136mm 116.0kg
8SXRSCCU Critical Care Cart - 1 x 76mm, 1 x 152mm, 3 x 229mm Drawers, Slate Blue Handles 882 x 633 x 1212mm 107.0kg
8SXRSARTH Arthroscopic Cart - 6 x 152mm, 1 x 229mm Drawers, Dark Taupe Handles, CAM Lock 882 x 633 x 1136mm 110.0kg
8SXRSIV IV Therapy Cart - 5 x 76mm, 2 x 229mm Drawers, Green Handles, CAM Lock 882 x 633 x 1136mm 106.0kg
8SXRSCAST Cast Cart - 2 x 76mm, 2 x 152mm, 2 x 229mm Drawers, Slate Blue Handles 882 x 633 x 1212mm 109.0kg
Procedure Carts - Polymer, Metro StarsysTM
Options
• 8SXLABKIT - Drawer/Door Label Holders, (x 10)
8SXRSDRS8SXRSDRS
This is a small
selection of a large
configurable range.
Please contact
our customer services
team to discuss your
requirements8SXRSCCU
Procedure Carts Procedure Trolleys & Carts 23
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
Anesthesia8SXRSANES
Trauma8SXRSTRAMA
Critical Care8SXRSCCU
Arthroscopic8SXRSARTH
IV Therapy8SXRSIV
Cast8SXRSCAST
76mm Drawer Divider Kit 2 1 4 1
Left Swing Out Pod, Three Tilt Bins
Left Swing Out Pod, Three Locking Tilt Bins (CAM Lock)
Left Swing Out Pod, Top Locking Tilt Bin (CAM Lock)
Pod Tray With Dividers
Waste Basket & Holder
Right Fixed Pod, One Tilt Bin
Right Swing Out Pod
Right Swing Out Pod, Three Locking Tilt Bins (CAM Lock)
Right Swing Out Pod, Top Locking Tilt Bin (CAM Lock)
Tilt Bin
Middle Non Locking Tilt Bin
Sharps Container Bracket
Left Swing Out Locking Pod, Three Tilt Bins (CAM Lock)
Right Swing Out Locking Pod, Three Tilt Bins (CAM Lock)
Overbridge with One Shelf & Accessory Rail
Overbridge with Two Accessory Rails
Two Hook Infusion Pole
Wire Basket
Universal Clamp
Laryngoscope Blade/Specimen Holder
Half Size Utility Bin (Metal)
Full Size Utility Bin (Metal)
Label/Tape Dispenser (x 3)
Plastic Utility Bins with Clear Covers (x 6)
Procedure Trolleys & Carts Procedure Carts24
email: [email protected] fax: +44 (0)1258 455056
• Range of lightweight metal procedure carts• Recessed liquid retaining vacuum formed top• Three locking options (CAM, push button or security seal compatible)• Full extension lightweight drawers, depths 76, 152 & 230mm (max load 24kg)• Lightweight polymer base with moulded bumper for impact protection• Two tone colour keyway, drawer fronts available in a range of colours• 125mm castors, 2 off braking
Features
Standard Colours
• Body - Light Taupe• Drawers - Dark Blue (see below for alternative colours)
Item Description Weight
8MBX1310GENDB 1 x 76mm, 3 x 152mm, 1 x 230mm Drawers 75.0kg
8MBX3210TRAUMADB 3 x 76mm, 2 x 152mm, 1 x 230mm Drawers 78.0kg
8MBX1310ANES4DB 1 x 76mm, 3 x 152mm, 1 x 230mm Drawers 81.0kg
Procedure Carts - Metal, Metro Basix™
Options
• 8MBA172 - Label Holders (x12)
Dimensions (w x d x h)
• Overall - 762 x 613 x 1440mm• Drawers - 432 x 565 x 76/152/230mm (internal)
General8MBX1310GEN
Trauma8MBX3210TRAUMA
Anesthesia8MBX1310ANES4
Infusion Pole
Side Accessory Bracket
Waste Container
Side Shelf
Overbridge Shelf
Overbridge Hanger Rail
Outlet Strip
Tilt Bins (x4)
Tilt Bins (x5)
Glove Box Holder
Sharps Bracket
Side Bins
Push Handles (x2)
Cam Lock
Security Seal Lock
Push Button Lock
8MBX1310GENDB 8MBX3210TRAUMADB 8MBX1310ANES4DB
General
8MBX1310GENDB8MBX1310GENDB
Alternative drawer colours are available. Change suffix ‘DB’ on the product code with any of the following i.e. - Basix Cart with red drawers 8MBX1310GENRE
Dark Blue Dark Taupe Red Teal Yellow
DB DT RE TE YE
Procedure Carts Procedure Trolleys & Carts 25
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• Range of compact metal procedure carts• Recessed liquid retaining vacuum formed top• Single-point locking using a CAM lock• Full extension lightweight drawers, depths 76, 152 & 230mm (max load 7kg)• Two tone colour keyway, drawer fronts available in a range of colours• 125mm castors, 2 off braking
Features
Standard Colours
• Body - Light Taupe• Drawers - Dark Blue (see opposite for alternative colours)
Item Description Weight
8MBC3110DB 3 x 76mm, 1 x 152mm & 1 x 230mm Drawers 63.0kg
8MBC1210DB 1 x 76mm, 2 x 152mm, 1 x 230mm Drawers 63.0kg
Procedure Carts - Metal, Metro Basix Compact
Options
• 8MBA172 - Label Holders (x 12)
Overall Dimensions (w x d x h)
• Overall - 489 x 470mm x 876mm• Drawers - 381 x 432 x 76/152/230mm, (internal)
Procedure Carts - Metal, Metro Basix CompactProcedure Carts - Metal, Metro Basix Compact
• Low level metal mobile workstation• Recessed liquid retaining top• Single point locking• To maximise safety, unit is fitted with an anti-tilt mechanism, allowing only one drawer to be
opened at any one time• Full extension drawers, depths 85, 170 & 255mm (max load 30.0kg)• Two tone colour keyway, drawer fronts available in a range of colours• Low level corner bumpers to protect the fabric of the building• 80mm heavy duty castors, 2 off braking
Features
Standard Colours
• Body - Light Grey• Drawers - Dark Grey
Item Description Weight
MW005 Mobile Workstation - 2 x 85mm, 1 x 170mm, 1 x 255mm Drawers, Cam Lock 49.0kg
Mobile Workstation - Metal, Low Level
Dimensions (w x d x h)
• Overall - 615 x 500 x 810mm• Drawers - 480 x 375 x 85/170/255mm (internal)
8MBC1210DB 8MBC3110DB MW005
General Information26
email: [email protected] fax: +44 (0)1258 455056
• Dimensions are stated in millimetres (width x depth x height)• Weights are stated in kilograms• Please ensure you are aware of the item size and weight prior to ordering
Dimensions & Weight
• All castors are fitted with non-marking tyres (with the exception of some anti-static versions)
• Anti-static castors can be identified by a yellow thread guard or a yellow mark on the edge of the tyre
• Castors are selected to suit the anticipated use of the trolley/piece of equipment
• Castors and wheel bearings do not require specific maintenance other than regular cleaning. The use of oil will breakdown the grease applied to the bearings, reducing the life of the castor. We recommend that fittings are checked regularly and re-tightened as required
• Where anti-static castors are fitted, we recommend that the tyre is periodically cleaned to remove any dirt to ensure a good contact between the tyre and the floor
Castors
• Locks should operate smoothly. If they do not, please arrange urgent attention and where necessary obtain a replacement
• Locks require only minimal maintenance and should only be lubricated using a dry lubricant such as graphite which can be purchased from most locksmiths (NEVER USE OIL)
• When ordering replacement locks or keys, please ensure that the product code, and any letters/numbers from the key and lock are available
Locks & Keys
Paint
• We use 304 and 430 grade stainless steel• Grade 304 is non-magnetic and used on products which are not painted• Grade 430 is magnetic and used on painted products• Other grades are available on request, i.e. 316• Please note that the term ‘stainless’ is not entirely accurate, as certain chemicals
can ‘eat’ into the surface. In particular ‘iodine’ which can badly corrode/stain and as a result should not be used as a cleaning agent
Stainless Steel
• Wood products are manufactured from FSC accredited materials• Flame retardant ‘High Pressure Laminate’ bonded to MDF• Melamine faced MDF
• Edges are protected with 2mm ABS/T-Barb edging or sealed with varnish• Both laminate and melamine panels offer some resistance to water penetration
under normal usage• We only use water based adhesives and varnishes
Laminate & Wood Products
• Upholstered panels are manufactured from ‘Flame Retardant’ materials, independently tested to ‘BS5852 Ignition Source 5’ (BS7176 Medium Hazard)
• Vinyl’s offer resistance to:• Melsept SF - Code CH - B:4422M32 (0.5% / 5%)• Hexaquart S - Code CH - B:406432 (1.5% / 5%)• Meliseptol - Code CH - B:4273M92 (Undiluted)
• All foam is ‘Fire Retardant’ and free of ‘Hexa-Bromo-Cyclo-Dodecane’
Upholstery
• All products are latex free
Latex
• We only use lead-free epoxy/polyester powder paint• Where possible colours are applied in special booths to allow for overspray to be
recycled• Alterative colours are available, this may be incur a small surcharge
General Information
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• The maintenance of high standards of cleanliness on all surfaces and equipment is a crucial factor in the prevention and control of infection. Whilst dust, dirt and moisture can harbour infection, the key risks are associated with contamination arising from contact with blood, body fluids, mucous membranes and damaged skin. In all cases surfaces must be thoroughly cleaned and disinfected in order to destroy pathogenic micro organisms.
• Bristol MaidTM products have been designed for use in demanding environments; full cleaning instructions can be downloaded from www.bristolmaid.com
Cleaning
Hospital Metalcraft meets its obligations as a business to business producer of Electrical and Electronic Equipment (EEE) through:
• Membership of the Veolia Environmental Services WEEE, (Waste Electrical and Electronic Equipment), Producer Compliance Scheme (Registration No. WEE/KE0677RX)
• Marking EEE placed on the market by Hospital Metalcraft with the mandatory crossed out wheeled bin symbol and Bristol Maid logo
• Making information available, (for EEE placed on the market after April 2007), to assist those engaged in treatment, recovery and recycling activities
• Arranging for the collection, treatment, recovery and environmentally sound disposal of obligated WEEE
Customers are advised that infected medical devices are not included within the scope of the WEEE Regulations and that arrangements described above do not extend to such products
Bristol Maid website (www.bristolmaid.com) and Terms & Conditions refer
WEEE Regulations
Standards & Symbols
Signifies that the product conforms with applicable European directives
Meets appendix A (StabilityRequirements) of BS3619:1976 MobileInfusion Stands
Signifies that the product has been tested to European standards for electromagnetic compatibility
Meets BS4068: 1977 Specification for hospital trolleys for instruments, dressings and for anaesthetists’ use
Signifies that the product does not use any hazardous substances in its electrical components
Meets BS1765: Part 1: 1990 Specification for general purpose bedside lockers for patients (with the exception of door hinges which are more robust and practical)
Flame RetardantMeets BS2483:1977 Specification for overbed tables
Resistant to Cold LiquidsFive Pin - BS3621 Anti Pick & Drill, Key Retaining Five Pin Cylinder Lock
Resistant to Mechanical DamageSix Pin - BS3621 Anti Pick & Drill, Key Retaining Six Pin Cylinder Lock
Department of Health Green Book
Independently tested to BS2881: 1989 (Security Level One) Specification for Cupboards for the Storage of Medicines in Health Care Premises
Independently tested to UN3291 - Certificate of Packaging Performance for the Transportation of Clinical Waste
Meets The Misuse of Drugs (Safe Custody) Regulations 1973
General Information 27
Colour Charts28
email: [email protected] fax: +44 (0)1258 455056
Paint Colours (Lead-free Epoxy/Polyester)
Upholstery Colours (Flame Retardant)
Laminate Colours (Flame Retardant)
White Red Spearmint Light Grey
Black Orange
Signal Yellow Signal Blue Signal Green Signal Blown
Purple
Granite Blue Sand Dune Forest Green Graphite
Bristol Blue Flame Red Aquamarine Onyx Black
Cream Claro Lagon Bianco Especial
Chene de Meymac
Gris Paloma
Charme d’Amboise
Please note that due to discrepancies with colour reproduction the shades depicted here may differ slightly from the finished product
Melamine
Ivory Spearmint Beech
General Information 29
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
Regional Sales Team
Sales RepresentativeJames Maplethorpe - 07887 [email protected]
• All orders are required in writing, either by fax, email or post. Unfortunately we cannot accept orders over the phone
• Orders should be submitted as an ‘official purchase order’ on company headed paper. All information should be clearly displayed
• Your order should contain the following - invoice address, delivery address, full contact details (name, phone & fax number) item codes along with descriptions and prices
• If applicable, please ensure our quote number is detailed on your order to ensure any agreed discounts are applied
• Item codes and descriptions in this catalogue supersede all previous editions• A full price list can be requested from our website• Payments can be made by cheque, bank transfer or credit/debit card (with the exception of American Express)• If you are a new customer, the first three orders will be processed on a proforma basis, paid in full prior to
manufacture & delivery, after which a credit account may be applied for• For our terms and conditions refer to www.bristolmaid.com• For further information and assistance, please contact our customer services team on
+44 (0) 1258 484455
How To Order
Sales RepresentativeAndrew McBennett - 07768 [email protected]
Sales RepresentativeJohn Baines - 07876 [email protected]
Sales RepresentativeJames Brown - 07500 [email protected]
Bristol Maid™ products are designed and manufactured to meet the demands of everyday use, which under normal conditions should provide many years of trouble free operation.
Please contact our Customer Services Team to discuss your requirements:
• Product placement & removal of packaging• Installation & commissioning• Training• Supply of spare parts• Full service & repair support• Maintenance contracts• Site audit & equipment recommendations
After Sales Service & Support
Sales RepresentativeJeremy Russell - 07889 [email protected]
Senior Account Manager (Northern)Steve Poller - 07711 [email protected]
Senior Account Manager (Southern)Tony Coubrough - 07889 [email protected]
Export Sales ManagerChris Morgan - +44 (0)7917 [email protected]
HTM71 Storage, Material Flow & Asset Management Solutions Product ManagerMatthew Poole - 07557 [email protected]
Furniture & Equipment For The Medical World
Blandford Heights, Blandford Forum, Dorset. D11 7TG, UKTel: +44 (0) 1258 451338Fax: +44 (0) 1258 455056
www.bristolmaid.com
Based in Blandford Forum, Dorset we design, manufacture and distribute the extensive range of Bristol Maid™ medical furniture together with other complimentary products from selected partners. With a broad portfolio and a comprehensive support team we are proud to provide a responsive and flexible service to meet our customer’s needs.
With over 58 years experience, the Bristol Maid™ brand has become synonymous with quality, durability and reliability, with a wide range of customers including the NHS, Private Healthcare Sector, Pharmacies and a growing network of Distributors throughout the UK, Ireland and many other countries around the world.
Working with our customers we are continually developing and enhancing our product ranges to ensure that they are fit for purpose, easy to use, reliable and above all represent value for money. We hope that you find this catalogue useful and welcome your suggestions on any improvements.