PRO SERIES - Accueil

PR

O S

ER

IES

UNLOCK A WH OLE NEW WOR LD OF POSS IB I L I T I ES .

cubcadet.ca/pro

Cub Cadet®’s commercial-grade products are designed, engineered, tested and constructed to unlock the possibilities of any operation, from community parks to local municipalities to prestigious sporting venues throughout the world. And it all starts with the PRO Series. A full lineup of professional machines that continue to earn the trust of serious landscapers. Day in. Day out. The PRO Series is built for business. Allowing you to start each day with a sense of possibility. And greet each sunset with a sense of accomplishment. As you’re about to see, the PRO Series has been solely created to meet and exceed any challenges you face.

A workforce to be reckoned with.

Table of contentsUnlock your possibilities with a quality professional

lineup that lets you take on long seasons of demanding

work with confidence.

PRO Z Series pg. 6–23

PRO Z 972 SD pg. 10–11

PRO HW Series pg. 24–29

CB 2000 Series pg. 30–31

PRO Z™ 972 SDzero-turn mowerspg. 10–11

PRO HW™ SERIEShydro walk mowerspg. 24–29

NEWCB 2000™ SERIEScommercial-grade leaf blowerspg. 30–31

PRO Z™ SERIESzero-turn mowerspg. 6–23

6 7

Superior cut quality at high speeds. Exclusive steering options for hillside domination.

Industry-leading steel thicknesses. Maintenance-free spindle assemblies. All backed

by limited commercial warranties with no hour limits. This is the PRO Z Series.

Designed to set you apart from the competition. More productivity with less downtime.

And durability that lasts year after year.

Believe in higher power.

Shown left: PRO Z 700 S Shown below: PRO Z 900 LPRO Z™

Series

cubc

adet

.ca/

pro

PR

O Z

SE

RIE

S

8 STEP-UP LAP BAR STEERING WHEEL

PRO Z™ 700PRO Z™ 500

Deck sizes: 60" and 72"Deck sizes: 48", 54" and 60"

Horsepower: Up to 27 HP**

Transmission: 12cc

Max speed: Up to 10 mph

Deck sizes: 60" and 72"

PRO Z™ 900

cubc

adet

.ca/

pro

PR

O Z

50

0/7

00

/90

0 O

VE

RV

IEW

9

The PRO Z™ Series lineup

An escalation of power.


Transmission: 14cc


Seat: Isolation-dampening system with lumbar adjustment

2 isolation-dampening mounts on front axle

13" run-flat front tires (lap bar)

16" turf front tires (steering wheel)

24" rear tires

Striping roller included


Transmission: 16cc


Seat: Isolation-dampening system with air-ride seat

2 isolation-dampening mounts on front axle

15" run-flat front tires (lap bar)

16" turf front tires (steering wheel)

26" rear tires

Striping roller included

TRIPLE

25°

Unmatched hillside confidence

Four-wheel steering wheel control and quick-adjust steering column.

B

C

INDUSTRY-LEADING STEERING WHEEL

PRO Z™ 972 SD

cubc

adet

.ca/

pro

10 11

The PRO Z 972 SD is a dual-wheel commercial zero-turn

engineered to dominate steep hills with up to a 25-degree

slope. With its unmatched maintenance-free deck, superior

cutting performance and air-ride comfort, this best-in-class

mower is the ultimate mowing solution for municipalities,

commercial cutters and properties with varying terrain.


Transmission: 16cc pumps and 310cc wheel motors


Seat: Extra high-back air ride suspension, EVC cushion, angled-back adjust, lumbar support, padded armrest, isolated dampening system mounted base (lateral suspension).

Features

25" x 9" – 12" dual rear wheels for ultimate traction

Four-wheel steering with EPS

7-gauge steel cutting deck with 7-gauge top and bottom reinforcements

Maintenance-free spindles

Electronic powered deck lift

12-volt outlet kit included

Deck size: 72"

PRO Z™ 972 SD featured accessories72" mulching kit

Discharge restrictor kit 72"

Light kit (ROPS mounted)

Caster wheel kit (deck-mounted)

Dual rear wheels

Oversized dual real wheels provide a higher level of stability, traction and precision.

PR

O Z

972

SD

IN

TR

OD

UC

TIO

N

Four-wheel power steering

Up to a 25-degree slope

Triple-7-gauge steel cutting deck

A

B

C

Mowing productivity from flats to slopes

The first-of-its-kind drive system with four-wheel steering provides ultimate control so you can comfortably mow a straight line and execute zero-degree-turns on everything from horizontal surfaces to slopes up to 25-degrees.

Introducing the newest member of the PRO Z™ Series

Conquer 25-degree slopes.

A

Unrelenting toughness.

Every single part of the PRO Z Series is designed to handle the serious rigors

of the job. From the thickness of the cutting deck to the all-around heavy-duty

construction, this zero-turn lineup will last for the long haul.

PRO Z™ durability

The thickest, strongest steel deck in the industry

Flexible rubber discharge chute1/4" leading rolled edge

2" x 3" pivoting front axleA

5/16" steel side reinforcements

Isolation-dampening system (standard on the PRO Z 700 and 900 Series)

B

High-lift Marbain® blades (with blade tip speed up to 18,500 fpm)

3/4" wear guard

5" steel hubsC

1/2" thick steel front yokesD

Sealed maintenance-free ball bearings

Adjustable rear striping roller (standard on the PRO Z 700 and 900 Series)

Tackle the toughest conditions with the industry-leading only triple-7-gauge steel cutting deck: a 7-gauge deck shell with 7-gauge top and bottom reinforcements.

DURABILITY QUALITY CUT

48" – 72" deck sizes

3" total blade overlap

Beefed-up front endAbsorb the impact of rough terrain with new front-end construction featuring a best-in-class combination of axle, hub and yoke size.

cubc

adet

.ca/

pro

PR

O Z

50

0/7

00

/90

0 D

UR

AB

ILIT

Y

13

Maintenance-free spindle assembly

A

A

A

“EXTREMELY DURABLE. IT’S A POWERHOUSE.”

WES NOLANDZandex Health Care Corp.

Pivoting front axle with isolation-dampening system mounts

A pivoting front axle allows the front end of the PRO Z to ride across unseen terrain while protecting the quality of the cut.

The frame and axle float as the PRO Z moves, allowing the deck to follow the shape of the terrain and avoid scalping.

“THE MOST COMFORTABLE MOWER SEAT [I’VE] EVER RIDDEN.”

NATE WILLIAMS Cave Hil l Cemetery

All-day comfort.

PRO Z™ comfort

A

A A

EVC cushion (elastic vibration control)

Isolation-dampening system

Angle adjustment

Padded armrests

Lumbar support

2 1/4" of travel (4 1/2" of total travel, industry-leading)

Isolation-dampening system (standard on the PRO Z 700 and 900 Series)

Maximum angle of travel is 6 degrees

PRO Z air-ride seatOur exclusive air-ride seat allows riders to adjust seat firmness to their personal preference. Standard on the PRO Z 900.

Let the PRO Z absorb the punches so your body doesn’t have to.

Experience a smooth ride all day long with the enhanced comfort

features of the PRO Z Series.

cubc

adet

.ca/

pro

PR

O Z

50

0/7

00

/90

0 C

OM

FOR

T

15

Air-ride controlA

A

“VERY COMFORTABLE AND VERY FIRM AT THE SAME TIME.”

GEORGE MORGAN C&M Lawncare

Maximum horsepower in every series

Optimum balance of torque and power

Maximum blade tip speed up to 18,500 fpm

Max speed [mph]

Torque [ft-lb]Horsepower [HP]

56.0 ft-lb

PRO Z 700PRO Z 500 PRO Z 900

12 mph10 mph 14 mph

Shown above: Kawasaki® FX Series 35 HP** (999cc), standard on the PRO Z 900

Commercial-quality cut at high speedsHigh-lift Marbain® blades with blade tip speed up to 18,500 fpm

3" total blade overlap (no need to double-cut; cuts every strand of grass in one pass)

Built for the long run.

PRO Z™ performance

If you’re looking to maximize your workday, look no further. High-torque commercial

transmissions are paired with high-horsepower commercial-grade engines to provide

optimal and consistent blade tip speed. So you can power through the thickest grass

in one pass at maximum speed.

Horsepower and torqueKawasaki®

high-horsepower engines

PRO Z 500 PRO Z 700 PRO Z 900

27 HP**

31 HP**

35 HP**

44.6 ft-lb

54.3 ft-lb

cubc

adet

.ca/

pro

PR

O Z

50

0/7

00

/90

0 P

ER

FOR

MA

NC

E

17

“I AM SAVING SEVERAL HOURS A DAY OF MOWING TIME.”

BROCK KENDRICK Benchmark Lawns

Ultra-traction tire / rimFor additional traction / hillside mowing.

Triple bagger15 cu-ft capacity / independent PTO-driven steel impeller.

Light kit Dual halogen lights mounted on ROPS.

Clamshell bagger12 cu-ft capacity / independent PTO-driven steel impeller / dump hopper from operator position.

Heavy-duty deck-mounted striping roller kitAdjustable rollers apply downward pressure onto the turf, leaving an enhanced stripe in the lawn.

Maximize your PRO Z performance.PRO Z™ 500/700/900 featured accessories

cubc

adet

.ca/

pro

PR

O Z

50

0/7

00

/90

0 A

CC

ES

SO

RIE

S

1918

Make your PRO Z even more capable.PRO Z 500/700/900 compatibility chart

ATTACHMENT 548 L 554 L EFI 554 L KW 560 L KW 554 S KW 560 S KW 760 L KW 760 L KW/EFI 772 L KW 760 S KW 772 S KW 960 L KW 972 L KW 960 S KW 972 S KW 972 SD

BAGGERS

Power-Assist Triple Bagger

Power-Assist Clamshell Bagger

Bagger Weight Kit / Front Weight Kit

MULCH KITS

48" Mulch Kit

54" Mulch Kit

60" Mulch Kit

72" Mulch Kit

STRIPING

Heavy-Duty Deck- Mounted Striping Roller Kit

DISCHARGE

54" / 60" Discharge Restrictor Kit

72" Discharge Restrictor Kit

LIGHT KITS

12-Volt Outlet Kit

Light Kit

TIRE CHAINS

24" Tire Chains

26" Tire Chains

OTHER

Electronic / Power Deck Lift Kit

24" Ultra Traction Tire / Rim

26" Ultra Traction Tire / Rim

Caster Wheel Kit (deck-mounted)

PRO Z 500 PRO Z 700 PRO Z 900

cubc

adet

.ca/

pro

PR

O Z

10

0 O

VE

RV

IEW

21

ATTACHMENT 148 L EFI 154 L EFI 160 L KW/KH EFI 148 S EFI 154 S EFI 160 S KW/KH EFI

Power-Assist Twin Bagger

48" Mulch Kit

54" Mulch Kit

60" Mulch Kit

Heavy-Duty Deck- Mounted Striping Kit

Discharge Restrictor Kit

12-Volt Outlet Kit

Light Kit

Wheel Weights

Tire Chains

Power Deck Lift

PRO Z 100 accessories

Exceeds expectations. Not budgets.

The PRO Z 100 allows you to go above and beyond without breaking the bank.

Professional-grade suspension seats come standard. The 48-, 54- and 60-inch

cutting decks featuring 10-gauge steel deck shells offer a variety of cutting

widths. Maintenance-free sealed spindles and professional-grade EFI engines

create a professional zero-turn rider that offers maximum value it its class.

PRO Z™ 100

Discharge restrictor kit

Power-assist twin bagger

Max speed [mph] Horsepower and torque

39.9 ft-lb

27 HP**

Torque [ft-lb]Horsepower [HP]9.5 mph

“WHEN YOU MOW 40 HOURS A WEEK, COMFORT IS A BIG THING.”

DAVID McCOYTown of Blacksburg

PRO Z™ SERIES FULL SPECS

PRO Z 148 L/S EFI PRO Z 154 L/S EFI PRO Z 160 L/S EFI PRO Z 160 L/S KW PRO Z 548 L KW PRO Z 554 L/S KW PRO Z 560 L/S KW PRO Z 760 L EFI PRO Z 760 L/S KW PRO Z 772 L KW PRO Z 960 L/S KW PRO Z 972 L/S KW PRO Z 972 SD

ENGINE AND DRIVE SYSTEM

Engine/Manufacturer Kohler® Confidant EFI EZT-740 Kohler Confidant EFI EZT-750 Kawasaki® FX730v Kawasaki FX730v Kawasaki FX850v Kawasaki FX850v EFI Kawasaki FX921v Kawasaki FX1000v

Horsepower 25 HP** 27 HP** 23.5 HP** 23.5 HP** 27 HP** 29.5 HP** 31 HP** 35 HP**

Displacement 747cc 726cc 726cc 852cc 852cc 999cc 999cc

Fuel Capacity 7 gal (twin 3.5 gal tanks) 14.9 gal (twin 7.45 gal tanks) with dial gauge 14.9 gal (twin 7.45 gal tanks) with electric gauge 14.9 gal (twin 7.45 gal tanks) with electric gauge

Transmission Hydro-Gear® ZT-3400 with charge pumps 12cc Parker® HTJ pump with hydro release lever 14cc Parker HTG pump with hydro release lever 16cc Parker HTG pump with hydro release lever Heavy-duty dual 16cc Parker HTG pump with hydro release lever

Ground Speed (forward / reverse) Up to 9.5 mph / 4.5 mph Up to 10 mph / 5 mph Up to 12 mph / 6 mph Up to 14 mph / 7 mph Up to 12 mph / 6 mph

MOWER DECK

Cutting Width 48" 54" 60" 48" 54" 60" 60" 72" 60" 72"

Deck Shell Construction Floating, fabricated 10 ga (0.135") steel shell (e-coated) Floating, fabricated 7 ga (0.187") steel Floating, fabricated 7 ga (0.187") steel Floating, fabricated 7 ga (0.187") steel

Reinforcements (top / bottom — leading edge) 2 ga / 7 ga – 1/4" 2 ga and 11 ga / 7 ga – 1/4" 7 ga / 7 ga – 1/4" 7 ga / 7 ga – 1/4" 7 ga / 7 ga – 1/4"

Side Reinforcement 5/16" steel 5/16" steel 5/16" steel 5/16" steel

Wear Guard 3/4" trim-side (polymer) 3/4" trim-side (polymer) 3/4" trim-side (polymer) 3/4" trim-side (polymer)

Blades / Blade-Tip Speed 3 high-lift Marbain® blades / 18,500 fpm (approx.) 3 high-lift Marbain blades / 18,500 fpm (approx.) 3 high-lift Marbain blades / 18,500 fpm (approx.) 3 high-lift Marbain blades / 18,500 fpm (approx.)

Spindle Construction 5" sealed cast-aluminum housing (maintenance-free) 8" sealed cast-aluminum housing (maintenance-free) 8" sealed cast-aluminum housing (maintenance-free) 8" sealed cast-aluminum housing (maintenance-free)

Discharge Chute High-density, impact-resistant rubber High-density, impact-resistant rubber High-density, impact-resistant rubber High-density, impact-resistant rubber

Deck Lift System Hand lever with spring assist Foot pedal with spring assist Foot pedal with spring assist Foot pedal with spring assist Electronic power deck lift system (included)

Height Positions / Height Range 15 / 1" – 5" 16 / 1" – 5" 16 / 1" – 5" 16 / 1" – 5"

CHASSIS

ROPS 2" x 2" quick-latch toolless foldable 3-position 2" x 2" quick-latch toolless foldable 3-position 2" x 2" quick-latch toolless foldable 3-position 2" x 2" quick-latch toolless foldable 3-position

Rear Bumper 5/16"-thick steel, standard rear hitch (e-coated) 5/16"-thick steel, standard rear hitch (e-coated) 5/16"-thick steel, standard rear hitch (e-coated) 5/16"-thick steel, standard rear hitch (e-coated)

Additional Bumper Features Pre-drilled mounts for attachments Pre-drilled mounts for attachments Pre-drilled mounts for attachments Pre-drilled mounts for attachments

Frame Fully welded, 12-ga channel frame (e-coated) Fully welded, 3/8" x 5" laser-cut steel full-length (e-coated) Fully welded, 3/8" x 5" laser-cut steel full-length (e-coated) Fully welded, 3/8" x 5" laser-cut steel full-length (e-coated)

Additional Frame Features 14-ga steel reinforcements Integrated tie-down slots Integrated tie-down slots Integrated tie-down slots

Front Axle 2" x 3" solid steel with sealed ball bearings 2" x 3" solid steel with sealed ball bearings 2" x 3" solid steel with sealed ball bearings and isolation-dampening system 2" x 3" solid steel with sealed ball bearings and isolation-dampening system

Front Yoke 3/8"-thick steel with sealed ball bearings 1/2"-thick steel with sealed ball bearings 1/2"-thick steel with sealed ball bearings 1/2"-thick steel with sealed ball bearings

OPERATION

PTO Warner® PTO clutch (125 ft-lb) Warner PTO clutch (125 ft-lb) Warner PTO clutch (200 ft-lb) with Soft-StartWarner PTO clutch (225 ft-lb)

with Soft-StartWarner PTO clutch (200 ft-lb)

with Soft-StartWarner PTO clutch (225 ft-lb)

with Soft-StartWarner PTO Clutch

(225 ft-lb) with Soft-Start

Steering Control (L/S models) Lap bar / adjustable tilting steering wheel with cruise control Lap bar / adjustable tilting steering wheel with electronic power steering (EPS) Lap bar / adjustable tilting steering wheel with EPS Lap bar / adjustable tilting steering wheel with EPS Adjustable tilting steering wheel with EPS

Operator Controls Low-profile throttle lever Low-profile throttle lever with dash guard Low-profile throttle lever with dash guard Low-profile throttle lever with dash guard

Additional Controls Sealed key switch / fingertip engagement PTO Sealed key switch / fingertip engagement PTO / resettable maintenance meter Sealed key switch / fingertip engagement PTO / resettable maintenance meter Sealed key switch / fingertip engagement PTO / resettable maintenance meterSealed key switch / fingertip engagement PTO / resettable

maintenance meter / 12 volt outlet kit

Parking Brake (L/S models) Integrated system / foot-operated pedal Hand operated with hydro-pump release Hand operated with hydro-pump release Hand operated with hydro-pump release

Front Tires (L/S models) Smooth 13" x 6.5" – 6" / turf 13" x 6.5" – 6" Smooth 13" x 6.5" – 6" / turf 15" x 6" – 6" Smooth (run flat) 13" x 6.5" – 6" / turf 16" x 6.5" – 8" Smooth (run flat) 15" x 6" – 6" / turf 16" x 6.5" – 8" Turf 16" x 6.5" – 8” with weighted rim

Rear Tires (L/S models) Turf 23" x 10.5" – 12" Turf 24" x 9.5" – 12" Turf 24" x 12" – 12" Turf 24" x 12" – 12" Turf 26" x 12" – 12" Dual TERRA TRAC Tread 25" x 9" – 12" (18” trac width)

Seat Type High-back suspension with seat belt, adjustable armrests and 6" seat travel High-back dial suspension with EVC cushion, seat belt, angle-back adjust and armrestsHigh-back dial suspension, EVC cushion, seat belt, angle-back adjust, lumbar support,

padded armrests, isolation-dampening system mounted base (lateral suspension)High-back air-ride suspension, EVC cushion, seat belt, angle-back adjust, lumbar support, padded armrests, isolation-dampening system mounted base (lateral suspension)

DIMENSIONS

Length 80" 80" 84" 86" 88"

Width (chute down / up) 49" / 61" 56" / 67" 62" / 73" 50" / 63" 56" / 67" 62" / 73" 62" 62" / 73" 74" / 85" 62" / 73" 74" / 85"

Height (ROP down / up) 48" / 70" 50" / 74" 52" / 74" 48" / 75" 52" / 75" 49” / 75”

Weight (L/S models) 970 / 1,000 lbs 1,000 / 1,030 lbs 1,030 / 1,060 lbs 1,272 lbs 1,300 / 1,438 lbs 1,324 / 1,462 lbs 1,424 lbs 1,424 / 1,562 lbs 1,475 / 1,613 lbs 1,442 / 1,580 lbs 1,591 lbs / 1,631 lbs 1,850 lbs.

WARRANTY

Warranty Information* 2-year / no-hour-limit commercial warranty 4-year / 500-hour limited residential warranty

3-year / no-hour-limit commercial warranty 5-year / 1,750-hour deck-construction warranty



PRO Z 100 PRO Z 500 PRO Z 700 PRO Z 900

2322

Limited quantitiesLimited quantities

Ready, willing and more than able. We’ve created a beast of a

machine without sacrificing maneuverability. The PRO Hydro Walk

Series features oversized rear tires and heavy-duty construction with

the flexibility to handle any terrain.

Tackle the toughest terrain.

PRO HW™ Series

cubc

adet

.ca/

pro

24

PR

O H

W S

ER

IES

25

Shown left and below: PRO HW 354

cubc

adet

.ca/

pro

26

PR

O H

W 3

00

OV

ER

VIE

W

27

PRO HW 336 Rugged durabilityThe highly durable Hydro Walk features the strongest

control center and yokes in the industry, along with higher

clearance and superior weight balance to maneuver over

curbs when moving forward or in reverse.

Maintenance-freeMaintenance-free spindles with sealed single-row ball

bearings deliver peak performance with limited downtime.

Hydro drive systemHand-lever control and single-lever cruise give you

infinite speed control so you can mow at your own pace.

10-gauge deck designA 10-gauge deck shell with 7-gauge top and bottom

reinforcements also features a 3/16-inch leading edge

and 1/4-inch side reinforcements. A 7-gauge leading

edge and 1/4-inch side reinforcements add to the all-

around heavy-duty construction

Horsepower: Up to 14.5 HP**

Transmission: Hydro-Gear® ZT 2800 (de qualité professionnelle)

Engine: Recoil start

Deck: 36" 10-gauge deck

Tires: 16" rear tires

PRO HW 348

Horsepower: 15 HP**


Engine: Electric start


Tires: 18" rear tires

PRO HW 354

Horsepower: 18.5 HP**


Engine: Electric start


Tires: 18” rear tires

PRO HW™ Series

Cut hills down to size.

STEP-UP

Get even more out of your Hydro Walk.PRO HW™ 300 accessories

cubc

adet

.ca/

pro

PR

O H

W A

CC

ES

SR

IES

AN

D S

PE

C C

HA

RT

29

PRO HWPRO HW 336 PRO HW 348 PRO HW 354

ENGINE AND DRIVE SYSTEM

Engine/Manufacturer Kawasaki® FS481v (recoil) Kawasaki FS541v (electric start) Kawasaki FS600v (electric start)

Horsepower 14.5 HP** 15 HP** 18.5 HP**

Displacement 603cc

Fuel Capacity 5-gal tank

Transmission Hydro-Gear® ZT 2800 charged (commercial grade)

Ground Speed (forward / reverse) Up to 7 mph / 3 mph

MOWER DECK

Cutting Width 36" 48" 54"

Deck Shell Construction Fixed floating, fabricated 10-ga (0.135") steel

Reinforcements (top / bottom — leading edge)

7 ga / 7 ga — 7 ga

Side Reinforcement 1/4" steel

Wear Guard 3/4" trim-side (polymer)

Blades / Blade-Tip Speed 3 high-lift Marbain® blades / 18,500 fpm (approx.)

Spindle Construction 5" sealed cast-aluminum housing (maintenance-free)

Discharge Chute High-density, impact-resistant rubber

Deck Lift System 4-pin manual with deck-mounted lift handles

Height Positions / Height Range 7 / 1.5" – 4.5"

CHASSIS

ROPS N/A

Rear Bumper N/A

Additional Bumper Features N/A

Frame Operator tower with 7-ga construction

Additional Frame Features Frame-mounted foot-pedal front-end lift assist

Front Axle 1.5" x 3" fully welded tube

Front Yoke 3/8"-thick steel with sealed ball bearings

OPERATION

PTO Warner® PTO clutch (125 ft-lb)

Steering Control Hand-lever steering control with ball-bearing linkage for smooth feel

Operator Controls Single-knob straight-line tracking adjustment

Additional Controls Single-level speed control (0–7 mph)

Parking Brake Hand-operated lever

Front Tires Smooth (run flat) 9" x 3.5" – 4" Smooth (run flat) 11" x 4" – 5"

Rear Tires Turf 16" x 6.5" – 8" Turf 18" x 8.5" – 8"

DIMENSIONS

Length 77"

Width 38" / 49" 50" / 61" 56" / 67"

Height 45" 46"

Weight 590 lbs 665 lbs 720 lbs

WARRANTY

Warranty Information* 2-year / no-hour-limit commercial warranty

PRO HW SERIES FULL SPECS

Discharge restrictor kitTemporarily closes off deck discharge opening from operator station when mowing around manicured beds, sidewalks or water.

Trash collector bagMesh bag with two compartments to be used for debris pickup and/or water bottle.

Light kitIlluminate your mowing path with the easy- to-install pre-wired LED light kit that has pre-drilled mounting points.

Side baggerSide-mounted steel bagger with 4.3 cubic feet of capacity for grass, leaves and debris.

Double-wheel sulkyReduce operator fatigue by turning your walk-behind into a stand-on with durable, welded steel construction and 280-pound capacity. Dual wheels provide more stability, and quick-release latch makes transportation easier.

Single-wheel sulky (not pictured)

Reduce operator fatigue, turning your walk-behind into a stand-on with durable, welded steel construction and 200-pound capacity. Quick-release latch makes transportation easier.

Mulch kit (not pictured)

Curved mulching blades circulate grass clippings beneath the deck to create smaller clippings that decompose more quickly, releasing nutrients into the soil.

28

Commercial blowers

Air-powered efficiency.

Shown far left: CB 2900 Shown left: CB 2900

cubc

adet

.ca/

pro

30 STEP-UP

CO

MM

ER

CIA

L B

LOW

ER

OV

ER

VIE

W

31

CB 2800

Up to 2,400 cfm of air volume and up to 200 MPH air speed

15 degrees up/down internal air and directional pitch control

429cc Kohler® OHV engine

CB 2900

Up to 2,400 cfm of air volume and up to 200 MPH air speed

15-degrees up/down internal air and directional pitch control

429cc Kohler OHV engine with electric startCub Cadet’s powerful, high-performance commercial blowers make quick

work of leaf debris and property cleanup. With unique air discharge control

options and available self-propelled functionality on select models, there

are options for every application. Allowing you and your crew to get the job

done with precision and ease.

Rotating air nozzleElectronic rocker switches (available on CB 2900) allow

180-degree rotation of the air nozzle, eliminating the need

to pull the unit backward when blowing in one direction.

Large adjustable air intakeControl airflow to 100%, ensuring you have just the right

amount to get the job done without disrupting flowerbeds

and mulched areas.

Self-propelled functionalityYou get enhanced maneuverability with six operating speeds

on self-propelled model, along with two reverse speeds.

Cub Cadet dealers know their equipment. And they know how to take care of it and their customers. You’ll get exceptional financing, great offers and the expertise you can only find from professionals who sell and service Cub Cadet equipment every day.

Demo a PRO Series unit and see for yourself. Visit CubCadet.ca/PRO.

YOUR AUTHORIZED CUB CADET® DEALER MAKES YOUR EXPERIENCE EVEN BETTER.

* 3-year unit warranty, unlimited hours. 5-year deck warranty up to 1,750 hours. For full warranty details and exclusions, visit www.cubcadet.ca or your local dealer.

** As rated by Kohler, all power levels are stated in gross horsepower at 3600 RPM per SAE J1940. As required by Kawasaki, horsepower tested in accordance with SAE J1995 and rated in accordance with SAE J2723 and certified by SAE International.

† Offer subject to credit approval. Some restrictions apply. See store associate for details.

Cub Cadet commercial products are intended for professional use. See owner’s manual or your local Cub Cadet Independent Dealer for warranty details and information. Certain restrictions apply.

This brochure is for advertisement purposes only. The product depictions are not meant to be used or relied upon as a substitute for the safety and use information that is published in the respective operator’s manual and on the machine. Models subject to limited availability. Specifications and programs are subject to change without notice.

Images may not reflect dealer inventory and/or unit specifications.

© 2019 Cub Cadet 881-11294

Documents

PRO SERIES - Accueil