Pro-Bolt 2011 Catalogue

1

TITANIUM PARTS

sales 0044 (0) 1684 851940 www.pro-bolt .com2

10 20 30 40 50 60 70 80 90 100 110 120 130mm 1401

About us ...........................................................................................................................2

Ordering Information ...............................................................................................3

Measuring Assistance & Material Information ..........................................4

Pro-Gauge Measuring Tool ...................................................................................4

Product Profi les ............................................................................................................8

ALUMINIUM PARTSBolts ................................................................................................................................ 12

Nuts ................................................................................................................................. 14

Washers ........................................................................................................................ 14

Finishing Touches ................................................................................................... 16

METRIC STAINLESS STEEL PARTSBolts ................................................................................................................................. 18

Nuts & Washers ......................................................................................................... 20

TITANIUM PARTSBolts ................................................................................................................................ 22

Nuts ................................................................................................................................. 26

Washers ......................................................................................................................... 28

Rods ................................................................................................................................. 29

1/4 TURN QUICK RELEASE FASTENERS Quick Release Fasteners in all Materials ..................................................... 30

WORKSHOP KITS, TUBS, BOXES & CABINETSAluminium ................................................................................................................... 32

Stainless Steel ............................................................................................................ 34

Titanium ........................................................................................................................ 35

MOTORCYCLE PARTSFull Monty Kits .......................................................................................................... 36

Engine Kits .................................................................................................................. 38

Cam Cover Bolts ...................................................................................................... 39

Sump Bolts ................................................................................................................... 39

Oil Filler Caps ............................................................................................................. 40

Fairing Kits ................................................................................................................... 41

Quick Release Fairing Kits .................................................................................. 42

Screen Kits .................................................................................................................... 43

Fuel Cap Kits .............................................................................................................. 44

Bar Ends ........................................................................................................................ 45

Top Yoke Nuts ........................................................................................................... 46

Pre-Load Adjusters ................................................................................................ 47

Cable and Dial Adjusters .................................................................................... 48

Reservoir Caps & Reservoir Clips ................................................................... 49

Gear Shift Rods ........................................................................................................ 50

Paddock Stand Bobbins ...................................................................................... 50

Chain Adjuster Blocks .......................................................................................... 51

Chain Adjuster Bolts ............................................................................................. 51

Sprocket Nuts ........................................................................................................... 52

Axle Nuts, Bolts & Swingarm Nuts ............................................................... 54

Disc Rotor Bolts ........................................................................................................ 56

WELCOME to the Pro-Bolt 2011/12 Catalogue

CALIPER PARTSBleed Nipples ............................................................................................................. 58

Banjo Bolts ................................................................................................................... 59

Caliper Pins .................................................................................................................. 60

POPULAR STRESS AREA KITSFront Caliper Component Refurbishment Kits ...................................... 62

Race-Spec Radial Caliper Mount Bolt Kits ................................................ 62

Un-Sprung Weight Overhaul Bolt Kits ........................................................ 63

Front & Rear Caliper Mount Bolts Kits ......................................................... 64

Front & Rear Caliper Pinch Bolt Kits .............................................................. 64

Fork Axle Pinch Bolt Kits ...................................................................................... 65

Brake & Clutch Perch Pinch Bolt Kits ............................................................ 66

Handle Bar Bolt Kits ................................................................................................ 66

Top & Bottom Triple Clamp Bolt Kits ............................................................ 67

Rider & Pillion Footrest Hanger Bolt Kits .................................................... 67

Scratch & Spark Sets ............................................................................................... 68

Subframe Bolt Kits ................................................................................................... 68

MOTORCYCLE SPECIAL PARTS FOR: Aprilia .............................................................................................................................. 69

BMW ................................................................................................................................ 69

Ducati .............................................................................................................................. 70

Honda ............................................................................................................................. 71

Kawasaki ........................................................................................................................ 72

MV Agusta .................................................................................................................... 72

Suzuki .............................................................................................................................. 73

Yamaha .......................................................................................................................... 73

Ancillary Items .......................................................................................................... 74

UNC Stainless Steel ................................................................................................. 76

Parts suitable for Harley Davidson® Motorcycles ..........................78/79

Worldwide Distributors ........................................................................................ 80

Display Stands ........................................................................................................... 81

IND

EX

100%

POLISHED

STAINLESS STEEL


Established in 1999, Pro-Bolt is a family business based in the Cotswolds, England. We are the world-leading supplier of quality fasteners, motorcycle accessories, cycle parts and other components.

We have a large range of products manufactured in the best materials available. This, incorporated with unique design and easy fitment of kits, provides an unbeatable combination.

Our roots derive from all corners of the motorcycle industry, supplying products to customise, personalise, enhance looks and performance – offering an excellent alternative to lost, rusty or simply heavy bolts. From Streetfighters to Race Bikes, Enduro, Trail or Scooters, you’ll find our brochure packed with imaginative, exciting and sexy products to improve your machine.

We supply Aluminium, Stainless Steel and Titanium, all offering their own strengths and benefits and each suitable for different applications.

Aluminium and Titanium products suit any market where looks and weight are crucial to ensure success. As the world’s largest stockist of top quality Titanium fasteners, our product is in strong demand by Race Teams – British Superbikes Teams, World Superbike Teams and Moto GP Teams all use Pro-Bolt. This reliability of both service and product is proven on the track to serve you well on the road.

Our range of Stainless Steel fasteners has proven a great success with products continually developing and growing. The unique design of the heads and quality of thread and finish is unparalleled. Each product is polished to a mirror finish.

Having such an extensive range of fasteners in the most attractive materials means our products are distributed and used worldwide in many diverse industries. We supply fasteners for Motorcycles, Formula 3,Quad Bikes, Kart Kits, Cycle Sets, ATV’s, Powerboats, Model Making, Yachting, Wheelchairs, Furniture and for many Marine applications.

Pro-Bolt produce a separate catalogue containing many specialist products for the Cycle Market and Off-Road Bikes. These are available on request and can also be downloaded on-line via www.pro-bolt.com.

Our expertise in polishing has opened up the market for cruisers which has traditionally been the domain of Chrome. Unfortunately, Chrome is only a coating and as such is prone to chipping, peeling and flaking even at the point of fitment. Unlike Chrome, our highly polished Stainless Steel offers strength along with an exceptional finish. Our new range of UNC bolts are available in unique head designs with rolled threads for added strength. We also now offer aftermarket model specific bolt kits suitable for Harley-Davidson® Motorcyles. Our fasteners exceed D.O.D, M.O.T and factory standards.

As with any successful company our biggest strength is our staff and our dedicated team of enthusiasts is on hand to provide you with the very best technical support.

Pro-Bolt has undertaken to achieve ISO9001-2008 and engaged a recognised Consultant Company to assist with this process. With the standards we already have in place we believe this will be achieved by September 2011. For clarification please refer to our website or contact us directly.

We specialise in offering many ‘specific kits’ thus our motto:

ABOUT US

HISTORY

and as such is prone to chipping, peeling and flaking even at the point of fitment. Unlike Chrome, our highly polished Stainless Steel offers strength along

10 20 30 40 50 60 70 80 90 100 110 120 130mm 1403

CONTACT INFORMATIONOffice hours: Monday-Thursday 8.30 - 5.00 Friday 8.00 - 4.00 (Answerphone out of hours)Telephone: +44 (0) 1684 851940Fax: +44 (0) 1684 850080E-mail: [email protected]: www.pro-bolt.comPost: Pro-Bolt Ltd, Unit F, 6400 Severn Drive, Tewkesbury Business Park, Tewkesbury, Glos GL20 8SF, UK.

ORDERING• Visit one of our UK Stockists: See the quality of our products

first hand. Phone for information or see our ‘dealer’ page via www.pro-bolt.com

• Phone, fax or post: See above contact information

• On-line: www.pro-bolt.com

ON-LINEDuring UK office hours our on-line support feature is available. This live feature enables us to answer questions, confirm stock availability,

provide advice and assist with navigating our website.

If you are part of social networking, be the first to find out about our latest products and events by becoming a fan on Facebook. You can also find out about our products on YouTube. Our range is constantly evolving with new products which are

regularly added to our website and broadcast on Facebook.

GLOBAL WEBSITESPro-Bolt has global websites based in several countries around the world, offering local sales support and advice using local language and currency. Please see our main website for details.

DELIVERY OPTIONSWe aim to deliver from stock in 1-2 days, but please allow 3 days before progressing your order. Delivery Options available are:

• 1st Class Post: Deliveries requested 1st Class Post are not traceable and Pro-Bolt is not responsible for lost in transit or non-delivery.

• Royal Mail Signed for: Signed Proof of Delivery is available once delivered, but this is non-traceable

• Courier: Fully traceable courier service

• Guaranteed Next Day: Deliveries before 9.30am and/or 1pm are available depending on delivery address

PRICE LISTS & FITMENT GUIDESThis catalogue is supplied with a separate Price List giving prices for individual bolts, packs, boxes and kits. Due to volatile material prices, Pro-Bolt reserves the right to change prices and discontinue products without notice. All retail prices in our Price List include VAT and are in Pounds Sterling. VAT will not be charged to retail customers outside of the EU. VAT will not be charged to registered business outside the EU, or in the EU if a valid VAT number is provided on placement of order.

Where you see this symbol you should refer to our model specific fitment guide, as this is a product we measure & check.

PAYMENT METHODSCredit or Debit Cards: Please have your card ready. We accept MasterCard, Visa, Delta, Solo, Maestro and American Express.Cheques: Payable to ‘Pro-Bolt’. Please allow 7 working days from receipt of cheque to allow clearance. Money Orders / Bank Drafts: On receipt of a Pro-Bolt pro-forma invoice, please send payable to ‘Pro-Bolt’ quoting your order number. PayPal: We can accept payment by PayPal – please ring for details.Bank Transfers: Pro-Bolt are able to offer pricing in Pounds Sterling, Euros or US Dollars – please contact us for relevant information.

SHORTAGES/DAMAGED GOODSMissing parts or damaged goods must be advised within 48 hours of receipt. Please retain evidence of damaged packaging.

DISCONTINUED PRODUCTSWe may at any time discontinue products as we see fit.

RETURNSTo return a product, please contact us for a Returns Reference Number within 28 days of purchase. No goods will be accepted without a Returns Reference. Returned goods, supplied correctly, will be subject to a 10% restocking charge. Our freepost address is: Returns, Pro-Bolt Ltd, FREEPOST SWC4834, Severn Drive, Tewkesbury Business Park, Tewkesbury, Glos. GL20 8SF, UK.

ACU DISCOUNTSPro-Bolt offer registered ACU racers a 10% discount throughout our range. When ordering, please have your registration details to hand.

UK STOCKIST & DEALERSPro-Bolt has a network of Stockists who hold a wide range of our products - they will also order in specific kits and accessories for you. A list of Stockists can be found on our website. In addition we have a large number of registered Dealers who also supply and fit our products – from Tuning Shops and Engineering Companies to High Street Shops. Only registered businesses that re-sell products qualify for discounts. If you are interested in becoming a Stockist or Dealer, please contact [email protected].

OVERSEAS DISTRIBUTORSPro-Bolt has a worldwide network of Distributors – please see page 80 for details. Our website www.pro-bolt.com lists the most up to-date information. If you are interested in becoming a Distributor of our products, please contact [email protected].

TRADEMARKSApriliaTM, BMWTM, BremboTM, CagivaTM, DucatiTM, Harley-Davidson®, KawasakiTM, MV AgustaTM, NissinTM, SumitomoTM, SuzukiTM, TokicoTM, TriumphTM, YamahaTM are registered trademarks, here used only as a reference.

PRO-BOLT COPYRIGHTPro-Bolt is a registered trade mark. Photography and the information present in this catalogue are the property of Pro-Bolt. All rights are reserved.

ORDERING INFORMATION

OR

DE

RIN

G IN

FO


ORDERING INDIVIDUAL BOLTSAll fasteners are available individually in any quantity. When ordering we offer the following advice and general information to assist. Our individual bolt part numbers detail the actual product as follows in this sequence.

• Material Aluminium, Stainless Steel or Titanium.

• Head Style Flanged Hex Head, Tapered Socket Cap, Countersunk etc.

• Shank Diameter M8 (8mm), M10 (10 mm), etc.

• Shank Length Measured from beneath the head (with the exception of countersunk bolts - where length includes the head).

• Thread Pitch (if other than standard) The distance from the crest of one thread to the next.

• The Colour Finish (if available/required) Aluminium: Black, Blue, Gold, Gunmetal Grey, Orange,

Purple, Red & Silver Stainless Steel: Polished Finish Titanium: Natural Finish, Blue, Gold & Purple Haze.

• Quantity Required

• Part Numbers TIHX835G Titanium Flanged Hex Head, M8 Thread Diameter x 35mm length under the head in gold.

LSSCS625 Stainless Steel Countersunk Bolt, M6 Thread Diameter x 25mm long.

PRO GAUGE MEASURING TOOL – A USEFUL AID Take the guesswork out of measuring Metric bolts. We offer a Pro-Gauge to make measuring easier, you’ll find it an essential tool box item.

• Teeth for Gauging Thread Pitch 0.7mm – 1.75mm teeth to match to your original bolts.

• Holes to Gauge Thread Diameter M4 to M12. The smallest hole which the bolt will fit through cleanly, without screwing it through, gives the thread diameter.

• To Measure Length of Bolt Place the under head of bolt to the edge of the tool to obtain the length of your original bolts (with the exception of countersunk bolts where the length should include the head).

MEASURING ASSISTANCE AND MATERIAL INFORMATION

Diameter M3 M4 M5 M6 M8 M10 M10 fine

M12 M12 fine

M12 x fine

Pitch (mm) 0.5 0.7 0.8 1.00 1.25 1.50 1.25 1.75 1.50 1.25

GENERAL THREAD INFORMATIONShorter bolts of 25mm or less will usually be fully threaded, whilst longer bolts usually have a grip length and 25mm of thread. The thread pitch of a standard metric screw corresponds to the bolt diameter. It is the distance from one peak of the thread to the next. A metric screw thread is specified by how far in millimetres it advances in one turn of the screw. For example, if one turn brings it 1mm closer, then it is a 1mm pitch. These are the industry standard thread pitches:

For fasteners where the head usually sits above the surface, the measurement is taken from directly under the head to the end of the fastener. For fasteners that are designed to be countersunk, the measurement is made from the flat of the head (where the surface of the material is), to the end of the fastener.

BOLT CONFIGURATIONHeadThe head is designed to provide a wrenching surface to tighten the bolt to the correct preload. Its size of bearing area depends on the stress level and the hardness of the material being fastened. There must be enough bearing surface to prevent indentation of the material under preload. To minimise the effects of fatigue, a bolt should be tightened or preloaded to an initial clamping load in excess of the maximum working load of the joint.

FilletThis area of structural discontinuity is a critical point of stress concentration. The radius where head and shank meet must be smooth and free from flaws. It should be as large as practical and still provide the necessary bearing area under the head.

Grip LengthMinimum grip length from protruding head bolts shall not be less than the head-to-shank fillet radius.

ShankThe shank must be fully concentric with the thread and with the head. To reduce bending moments, the angle between head and shank axis must be kept to a minimum. The fit between bolt shank and mating hole must be kept to a very close tolerance to maximise shear strength.

Thread & PitchThe two most critical thread factors for high strength/high fatigue rating are a generous root radius to minimise notch effect and compressive pressurising achieved by rolling threads after heat treatment. The pitch diameters must also be closely controlled for high fatigue applications. Where lock nuts will be used, thread point chamfer must be kept to a minimum. Where thread run-out flares into the shank, there should be no abrupt changes in the cross sectional area.

Overall Length

Head Height

Grip LengthThread Length

Shank Diameter Fillet

MATERIAL INFO

10 20 30 40 50 60 70 80 90 100 110 120 130mm 1405

ALUMINIUM

To customise your machine, we off er a wide range of fasteners and accessories. This ever increasing range allows you to create a unique look and style. You can customise your machine little by little, or make large-scale changes; either way you will be guaranteed colour consistent parts throughout that are machined to a high quality smooth fi nish. We off er model specifi c kits for Motorcycles, Cycle Sets and Rocker Cover Kits. Our lightweight bolt kits are available for a huge number of bikes, enabling you to change Engine Casing Bolts, Fairing Bolts, Screen Bolts and Fuel Cap Surround Bolts with no need to measure your originals - we’ve done it for you! Whichever bike you ride you are sure to fi nd goodies that are fun, functional and make your bike unique and stand out from the crowd. All our kits and accessories are available in a choice of Black, Blue, Gold, Gunmetal Grey, Orange, Purple, Red and Silver.

• Manufacturing process: Head: cold formed; Shank: thread rolled.

• Anodising: Chemically brightened and colour anodised to between 8 and 12 microns thick.

• Weight: 60% lighter than steel – 40% lighter than Titanium.

• Corrosion: Saltwater, road fi lm or mild acids do not aff ect anodised aluminium.

• Application: Aluminium is suitable for use in all non-safety critical areas – mudguards, screens, fairings, engine casings, huggers, fuel caps, number plates, lamp units, exhaust cans, heel plates, exhaust manifold brackets, fuel cap surround, air filter, car rocker covers, plus many more. Aluminium is not suitable for any stress area applications. If you are in any doubt as to the suitability of our products for your machine, or the size you need, please contact Pro-Bolt direct.

MATERIAL PROPERTIES• Density: ......................................................................................2730 kg/m3 (170lb/ft3)• Young’s Modulus: ................................................................... 72GPa (10.4 x 106psi)• Yield Strength: ........................................................................505MPa (73.2 x 103psi)• Ultimate Tensile Strength: ...............................................570MPa (82.7 x 103psi)• Compressive Strength: ......................................................505MPa (73.2 x 103psi)• Shear Modulus: .......................................................................27GPa (3.92 x 106psi)• Shear Strength: ..................................................................... 330MPa (47.9 x 103psi)• Ductility: ...............................................................................10% elongation at break• Poisson’s Ratio: ............................................................................................................... 0.33• Hardness: .............................................................................................................150 Brinell• Strength-to-Weight Ratio: ..................................................................... 185 kNm/kg• Stiffness-to-Weight Ratio: .................................................................. 26.4 MNm/kg

Thread Diameter

Material Tensile Stress Area (mm2)

Max Load (kN)

Total Elongation (mm)

6mm 20.1 11.58 0.56

8mm 36.6 23.19 0.62

10mm 58.0 39.17 1.05

MA

TE

RIA

L IN

FO

ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY

ORANGE • PURPLE • RED • SILVER

Aluminium

Torque & Lubrication: Where we offer model specific replacement Bolt Kits, Aluminium is a softer and weaker alternative to the original bolts being replaced, so a lower torque is required to prevent damage to your Pro-Bolt fastener.

Where individual bolts are purchased, torque guides vary depending on the material, manufacturing method, thread diameter, pitch and head style. This torque information can be supplied on request, or downloaded via www.pro-bolt.com in a separate document entitled ‘Material Information’ wherever you see the icon shown here.

For general use fasteners we recommend an anti-seize or a copper based lubricant be applied to the threads in order to prevent seizing.

If you are in any doubt as to the suitability, torque settings of our products for your specific application, please do not hesitate to contact us prior to fitment.


STAINLESS STEEL

Fit & Forget! Manufactured from 316 Stainless Steel, which is superior in strength and corrosion resistance, we are proud to offer an exceptional quality product. Pro-Bolt is the first to provide Tapered Socket Caps, Flanged Hex Heads and Domed/Mushroom Fairing Bolts. We are offering a quality grade material in unique head styles – and to a polished mirror finish. Absolutely no polishing is required. Forget rough nuts and take a close look at our buffed nuts! No stamp marks in the bolt heads or cracked and grainy finishes. No matter how many dark winter nights you spend polishing mass-produced lesser quality bolts, you will never achieve the quality of finish and material we offer. Please be aware that not all Stainless Steel is suitable for stress areas. However, our 316 Stainless Steel is suitable for Engine Casings, Fairings, Screens, Front Axle Pinch Bolts, Caliper Pinch Bolts, Caliper Mount Bolts, Footrest Hanger Bolts, Clip-On Handle Bar Bolts, Brake/ Clutch Pinch Perch Bolts, Top/Bottom Yoke Clamp Bolts. Also available are 1/4 Turn D-Ring Quick Release Fasteners, 1/4 Turn Allen Key Drive Quick Release Fasteners, Brake Caliper Pad Pins, Axle Nuts, Banjo Bolts, Bleed Nipples and Motorcycle Disc Rotor Bolts.

• Material specification – 316.

• Manufacturing process: We manufacture in a single process on multi axis CNC machining centres, which includes thread rolling. Thread standards are to BS3692:1967 which is the British Standard for ISO Precision Metric Threads. Route radii vary between 0.8mm and 0.4mm. This is the maximum that we can use and improves shear strength. Thread lead varies between K1 and K2.

The head and shank are Pro-Bolt’s own designs, which have been successfully tested in the field for the last four years.

• Stainless Steels are iron alloys with a minimum of 10.5% Chromium with other elements (Nickel, Molybdenum, Titanium, Copper, Carbon, Nitrogen) added to enhance properties such as formability and strength. It is the chromium-rich, oxide film that gives the corrosion resistance of Stainless Steel. This protective film is strong and chemically stable (i.e. passive) where there is sufficient oxygen on the surface. This protection is extremely thin and will usually self-repair if sufficient oxygen is available. Please note: Under certain conditions the passive state can be broken down and corrosion can result.

• Heat Resistance: 316 has good resistance to oxidation in continuous service to 870oC and intermittent service to 925oC. However, continuous use at 425-860oC is not recommended due to its resistance to carbide precipitation. Where high strength is required at temperatures above 500oC, Grade 316H is recommended.

• Alloy Designations: Stainless Steel 316 corresponds to the following standard designations and specifications:

MATERIAL PROPERTIES• Density: ...................................................................................... 8030 kg/m3 (501lb/ft3)• Young’s Modulus: .......................................................................193GPa (28 x 106psi)• Yield Strength: ........................................................................ 260MPa (37.7 x 103psi)• Ultimate Tensile Strength: ............................................... 570MPa (82.7 x 103psi)• Compressive Strength: ...................................................... 260MPa (37.7 x 103psi)• Shear Modulus: .........................................................................78GPa (11.3 x 106psi)• Ductility: .......................................................................... 40% elongation at break +• Minimum value allowed by ...................................................................ASTM A240• Poisson’s Ratio: ................................................................................................................0.27• Hardness: .................................................................................................95 Rockwell B +• Maximum value allowed by ..................................................................ASTM A240• Strength-to-Weight Ratio: ..................................................................... 32.4kNm/kg• Stiffness-to-Weight Ratio: ...................................................................... 24 M Nm/kg

Thread Diameter


Max Load (kN)


6mm 20.1 16.40 1.93

8mm 36.6 29.15 2.85

10mm 58.0 46.89 3.70

MATERIAL INFO

ALL AVAILABLE IN POLISHED STAINLESS

Stainless Steel

Torque & Lubrication: Where we offer model specific replacement Bolt Kits please, use your manufacturer’s recommended torque settings. Disc Rotor Bolts are the only exception and have a lower setting which we specify in the product packaging.


For general use fasteners, we recommend an anti-seize or a copper based lubricant be applied to the threads in order to prevent galling, the exception being bleed nipples and banjo bolts which should be fitted dry. For bolts in safety critical areas, we recommend a medium strength threadlock.


ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE

Titanium

10 20 30 40 50 60 70 80 90 100 110 120 130mm 1407

TITANIUM

MATERIAL PROPERTIESMaterial Information• Density: ......................................................................................4420 kg/m3 (276lb/ft3)• Young’s Modulus: ...................................................................... 110GPa (16 x 106psi)• Yield Strength: ....................................................................... 828 MPa (120 x 103psi)• Ultimate Tensile Strength: .............................................1030MPa (149 x 103psi)• Compressive Strength: .......................................................960MPa (139 x 103psi)• Shear Modulus: ........................................................................ 43GPa (6.24 x 106psi)• Ductility: ...............................................................................10% elongation at break • Poisson’s Ratio: ............................................................................................................... 0.34• Hardness: .....................................................................................................36 Rockwell C• Maximum value allowed by ................................................................. ASTM A240• Strength-to-Weight Ratio ........................................................................187kNm/kg• Stiffness-to-Weight Ratio ......................................................................24.9MNm/kg

Thread Diameter


Max Load (kN)


6mm 20.1 21.25 0.54

8mm 36.6 36.78 0.48

10mm 58.0 53.53 1.45

MA

TE

RIA

L IN

FO

Made from aircraft grade Titanium 6AL-4V (grade 5), the outstanding benefits are that we roll the threads to produce greater fatigue strength and reduce galling. These bolts are in excess of 120,000psi ultimate tensile strength, suitable to replace both Grade 5 and Grade 8 steel bolts. We carry the UK’s widest range of products for the automotive industry. We offer Flanged Hex Head, Tapered Socket Cap, Countersunk, and Dome Head Bolts, Nuts and Washers – from 3mm to 12mm. We also offer Axle Nuts, Swingarm Nuts, Yoke Nuts, Caliper Pins, Banjo Bolts, Disc Bolts and many more specifically machined items. For motorcyclists we have made it so easy to replace bolts in stress areas by doing all the measuring for you, and offering the relevant fasteners in kit form. All our Titanium nuts, bolts, washers and specially machined items are available in natural, blue, gold and purple haze, with the exception of our Race-Spec range which has a factory finish.

• Ti-6Al-4V, an alloy introduced in 1954, is a good general purpose grade. Titanium alloy is available in all product forms. Its density is 0.160 pounds per cubic inch. It can be heat-treated to ultimate strengths in excess of 170,000psi and responds to heat treatment in sections up to 15mm. This alloy is stable at temperatures ranging from 423oF to over 1000oF.

• Manufacturing process: We manufacture in a single process on multi axis CNC machining centres, which includes thread rolling. Thread standards are to BS3692:1967 which is the British Standard for ISO Precision Metric Threads. Route radii vary between 0.8mm and 0.4mm. This is the maximum that we can use and improves shear strength. Thread lead varies between K1 and K2.

• Other Items: Machined from bar.

• Weight: 42% lighter than steel.

Torque & Lubrication: Where we offer model specific replacement Bolt Kits please, use your manufacturer’s recommended torque settings. Disc Rotor Bolts are the only exception and have a lower setting which we specify in the product packaging.


For general use fasteners, we recommend an anti-seize or a copper based lubricant be applied to the threads in order to prevent galling, the exception being bleed nipples and banjo bolts which should be fitted dry. For bolts in safety critical areas, we recommend a medium strength threadlock.



M8 (1.25)

M6 (1.00)

M5 (0.8)

M4 (0.7)

M3 (0.5)

Note: Not all sizes are available in ALL materials, please refer to relevant material section.

Standard Allen Key Socket Cap Bolts

M5 (0.8)

45 50 55 60 65 70 75 80

M10 (1.50) also available in fine (1.25) pitch

M8 (1.25)

M6 (1.00)

Tapered Socket Cap Bolts

M4 (0.7)

PRODUCT PROFILES

M7 (1.00)

10 20 30 40 50 60 70 80 90 100 110 120 130mm 1409

M5 (0.8)

M6 (1.00)

M8 (1.25)

M10 (1.50) • also available in fine (1.25) pitch• longer lengths available in fine (1.25) pitch

Flanged Hex Head Bolts

M4 (0.7)

M8 (1.25 )

M4 (0.7) M6 (1.00)M5 (0.8)

Countersunk Bolts

M8 (1.25)

16 mm

12 mm M5 (0.8)

8 mm M4 (0.5/0.7)

M6 (1.00)

16 mm

Dome Head/Fairing Bolts

M6 (1.00)

12 mm

18 mm M10 (1.25)

M5 (0.8)

16 mm

M12 (1.25)

PR

OD

UC

T P

RO

FIL

ES


M10

20 mm

M8

16 mm

M6

23 mm10 mm

M5

13 mm

M6 22 mm

M8 25 mm

M6

19 mm

M5

Flat Washers

Drilled Washers

Countersunk Bodywork Washers

M8

16 mm

15 mm

M5

M10

20 mm

M12

24 mm

7 mm

M3

10 mm

M5

20 mm

M5

M14

28 mm

M4

9 mm

PRODUCT PROFILES

Note: Not all sizes are available in ALL materials, please refer to relevant material section.

M8

20 mm

12 mm

M6 M12

25 mm

12 mm

M6 M6

18 mm15 mm

M6 M6

20 mm

M6

25 mm

M6

30 mm

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14011

Break Edge45o x 0.5

C

D

Race Spec Bolts

Race Spec Bodywork Bolts

16 mm M8 (1.25)

25

15 mm

252015

M8 (1.25)

28

3032

40 45 50 55 60 65 70 75 80 85 9035

20

M7 (1.00)

40 50 60 80

11 mm

17 mm

2520

M10 (1.25)

30 40 45 50 55 60 65 70 75 80 9035

PR

OD

UC

T P

RO

FIL

ES

16 mm M6 (1.00)

30201612 25

11 mm

25201012

16

15

14

M6 (1.00)

18 22 28

3032

40 45 50 55 60 65 70 75 80 8535

10 mm

252010 15

M5 (0.80)

12

3530

M5 (0.80)

16

12 mm

12 25


Standard Allen Key Socket Cap Bolts

BOLTS

Part Number Thread & Pitch Length

LPB308 M3 x 0.5mm 8mm




M3 Thread Diameter (2mm Allen Key) Length measurements are taken from below the head







LPB610 M6 x 1.00mm 10mm

LPB612 M6 x 1.00mm 12mm

LPB616 M6 x 1.00mm 16mm

LPB620 M6 x 1.00mm 20mm

LPB625 M6 x 1.00mm 25mm

LPB630 M6 x 1.00mm 30mm

LPB635 M6 x 1.00mm 35mm

LPB640 M6 x 1.00mm 40mm

LPB645 M6 x 1.00mm 45mm

LPB650 M6 x 1.00mm 50mm

LPB655 M6 x 1.00mm 55mm

LPB660 M6 x 1.00mm 60mm

LPB665 M6 x 1.00mm 65mm

LPB670 M6 x 1.00mm 70mm

LPB675 M6 x 1.00mm 75mm

LPB680 M6 x 1.00mm 80mm

LPB685 M6 x 1.00mm 85mm

LPB690 M6 x 1.00mm 90mm

LPB695 M6 x 1.00mm 95mm

LPB6100 M6 x 1.00mm 100mm


ALUMINIUM PARTS

Available individually or in packs of 5/10












10 20 30 40 50 60 70 80 90 100 110 120 130mm 14013

Part Number Thread & Pitch Length Allen Key Size

LCS415 M4 x 0.7mm 15mm 2.5

LCS420 M4 x 0.7mm 20mm 2.5

LCS445 M4 x 0.7mm 45mm 2.5

LCS450 M4 x 0.7mm 50mm 2.5

LCS520 M5 x 0.8mm 20mm 3

LCS530 M5 x 0.8mm 30mm 3

LCS535 M5 x 0.8mm 35mm 3

LCS615 M6 x 1.00mm 15mm 4

LCS625 M6 x 1.00mm 25mm 4

LCS635 M6 x 1.0mm 35mm 4

LCS820 M8 x 1.25mm 20mm 6

LCS840 M8 x 1.25mm 40mm 6

Countersunk Bolts Length measurements include the head


LPB812 M8 x 1.25mm 12mm

LPB820 M8 x 1.25mm 20mm

LPB825 M8 x 1.25mm 25mm

LPB830 M8 x 1.25mm 30mm

LPB835 M8 x 1.25mm 35mm

LPB840 M8 x 1.25mm 40mm

LPB860 M8 x 1.25mm 60mm



LH465 M4 x 0.7mm (10mm head diameter) 6.5mm

LH420 M4 x 0.7mm (10mm head diameter) 20mm

Honda Special Fuel Cap Bolts Length measurements are taken from below the head

Part Number Thread & Pitch Length Allen Key Size

LFB412F M4 x 0.5mm (8mm head) 12mm 2.5

LFB412 M4 x 0.7mm (8mm head) 12mm 2.5

LFB425 M4 x 0.7mm (8mm head) 25mm 2.5

LFB512 M5 x 0.8mm (12mm head) 12mm 3


LFB516XL M5 x 0.8mm (16mm head) 16mm 3






LFB620XS M6 x 1.00mm (12mm head) 20mm 4



LFB630XS M6 x 1.00mm (12mm head) 30mm 4





Dome Head/Fairing Bolts Length measurements are taken from below the head



Aluminium

AL

UM

INIU

M


NUTS

Part Number Thread & Pitch Socket SizeLFN5 M5 x 0.8mm 8mm

LFN6 M6 x 1.00mm 10mm

LFN6LH (Left Hand Thread) M6 x 1.00mm 10mm

LFN8 M8 x 1.25mm 13mm

Full Nuts

Part Number Thread & Pitch Socket SizeLNYN4 M4 x 0.7mm 7mm

LNYN5 M5 x 0.8mm 8mm



Nyloc Nuts

Part Number Thread & Pitch Socket Size HeightLDOMENUT4 M4 x 0.7mm 7mm 8mm

LDOMENUT5 M5 x 0.8mm 8mm 10mm



LDOMENUT10F M10 x 1.25mm 17mm 18mm


Dome Nuts

WASHERS

Part Number Inside Diameter

Outside Diameter

Thickness

LWA3 M3 7mm o/d 0.55mm




LWA6-18 M6 18mm o/d 1.40mm


LWA8-20 M8 20mm o/d 1.60mm


Flat Washers

Drilled WashersPart Number Inside

Diameter Outside Diameter

Thickness

LWAD5 M5 10mm 1.30mm


LWAD6-23 M6 23mm 1.50mm




Countersunk Bodywork WashersPart Number Inside


Thickness

LWAC5 M5 13mm o/d 3.20mm

LWAC6-19 M6 19mm o/d 3.40mm

LWAC6-22 M6 22mm o/d 3.40mm

LWAC8 M8 25mm o/d 5.00mm

Flared WashersPart Number Inside


Thickness

LWAPB625 M6 25mm o/d 7.00mm

Manufactured to be fitted with a 6mm standard socket cap bolt

ALUMINIUM PARTS

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14015

AL

UM

INIU

M



AluminiumRACE-SPEC BOLTS

New Bolt Range in 7075 Aluminium machined with Rolled Threads for superior strength. Our Race Spec bolts are widely used by Racers, enthusiasts and those who like attention to detail. The heads are pre-drilled on the fl ats for ease of lockwiring and etched with the Pro-Bolt name. Our Aluminium Race Spec Bolts represent an outstanding 62% weight saving over equivalent sized steel bolts.

Part Number

Thread/ Pitch Length Thread

Length Flange Diameter

Socket Size

LHX510R M5 x 0.8mm 10mm 10mm 10mm 7mm LHX512R M5 x 0.8mm 12mm 12mm 10mm 7mm LHX516R M5 x 0.8mm 16mm 16mm 10mm 7mm LHX520R M5 x 0.8mm 20mm 20mm 10mm 7mm LHX525R M5 x 0.8mm 25mm 25mm 10mm 7mm LHX530R M5 x 0.8mm 30mm 25mm 10mm 7mm LHX535R M5 x 0.8mm 35mm 25mm 10mm 7mm LHX610RE M6 x 1.00mm 10mm 10mm 12mm 8mm LHX612RE M6 x 1.00mm 12mm 12mm 12mm 8mm LHX615RE M6 x 1.00mm 15mm 15mm 12mm 8mm LHX620RE M6 x 1.00mm 20mm 20mm 12mm 8mm LHX625RE M6 x 1.00mm 25mm 25mm 12mm 8mm LHX630RE M6 x 1.00mm 30mm 30mm 12mm 8mm LHX635RE M6 x 1.00mm 35mm 25mm 12mm 8mm LHX640RE M6 x 1.00mm 40mm 25mm 12mm 8mm LHX645RE M6 x 1.00mm 45mm 25mm 12mm 8mm LHX650RE M6 x 1.00mm 50mm 25mm 12mm 8mm LHX655RE M6 x 1.00mm 55mm 25mm 12mm 8mm LHX660RE M6 x 1.00mm 60mm 25mm 12mm 8mm LHX665RE M6 x 1.00mm 65mm 25mm 12mm 8mm LHX670RE M6 x 1.00mm 70mm 25mm 12mm 8mm LHX675RE M6 x 1.00mm 75mm 25mm 12mm 8mm LHX680RE M6 x 1.00mm 80mm 25mm 12mm 8mm LHX685RE M6 x 1.00mm 85mm 25mm 12mm 8mm LHX690RE M6 x 1.00mm 90mm 25mm 12mm 8mm LHX820RE M8 x 1.25mm 20mm 20mm 15mm 10mm LHX825RE M8 x 1.25mm 25mm 25mm 15mm 10mm LHX830RE M8 x 1.25mm 30mm 30mm 15mm 10mm LHX835RE M8 x 1.25mm 35mm 25mm 15mm 10mm LHX840RE M8 x 1.25mm 40mm 25mm 15mm 10mm LHX845RE M8 x 1.25mm 45mm 25mm 15mm 10mm LHX1025FRE M10 x 1.25mm 25mm 25mm 17mm 12mm LHX1030FRE M10 x 1.25mm 30mm 30mm 17mm 12mm LHX1035FRE M10 x 1.25mm 35mm 30mm 17mm 12mm LHX1040FRE M10 x 1.25mm 40mm 25mm 17mm 12mm LHX1045FRE M10 x 1.25mm 45mm 25mm 17mm 12mm LHX1050FRE M10 x 1.25mm 50mm 25mm 17mm 12mm LHX1055FRE M10 x 1.25mm 45mm 25mm 17mm 12mm LHX1060FRE M10 x 1.25mm 60mm 25mm 17mm 12mm

Part Number

Thread/ Pitch Length Thread

Length Flange Diameter

Socket Size

LBWHX512R M5 x 0.8mm 12mm 12mm 16mm 7mm LBWHX516R M5 x 0.8mm 16mm 16mm 16mm 7mm LBWHX525R M5 x 0.8mm 25mm 25mm 16mm 7mm LBWHX612R M6 x 1.00mm 12mm 12mm 16mm 8mm LBWHX616R M6 x 1.00mm 16mm 16mm 16mm 8mm LBWHX620R M6 x 1.00mm 20mm 20mm 16mm 8mm LBWHX625R M6 x 1.00mm 25mm 25mm 16mm 8mm LBWHX630R M6 x 1.00mm 30mm 30mm 16mm 8mm LBWHX825R M8 x 1.25mm 25mm 25mm 16mm 10mm

New Bodywork Bolt Range in 7075 Aluminium machined with Rolled Threads for superior strength. These bolts are perfect for plastics/bodywork where the large diameter will prevent bolts 'pulling through' bodywork. The external hex drive on the head off ers enhanced strength. The heads are pre-drilled on the fl ats for ease of lockwiring. Our Aluminium Race Spec Bolts represent an outstanding 62% weight saving over equivalent sized steel bolts.

Race-Spec Hex Head Bolts

Race-Spec Body Bolts


Push-in button inserts are ideal for covering stress areas and non stress bolts, keeping out the dirt or for an effective colour contrast. Push-in buttons fit into the head of a standard allen key socket cap bolt and are held in place with a rubber 'O' ring. When ordering, please note sizes are taken from the thread diameter of the corresponding bolt – NOT the allen key drive.

Available individually in the following sizes:

Part Number Description Outside

DiameterTo Suit Allen Key Size

LBUT5 5mm Button Insert 7.8mm 4

LBUT6 6mm button insert 9.3mm 5



Button Inserts

FINISHING TOUCHES

Don’t let your lines rub you up the wrong way! Separate them with these neat little additions. Supplied with a colour co-ordinated Countersunk Bolt and Nyloc Nut to clamp a 7mm hose.

Cup Washers

The cup washer slides up the thread of the bolt and shrouds the head, leaving the head surface exposed. Good way to colour contrast – try these with a different coloured Aluminium bolt for a truly unique look. Available in the following sizes:

Hose Separators

Part Number Description

HOSESEP10 Brake line hose separator kit

Part Number Description Outside

Diameter

LWACP5 5mm Cup Washer 10.6mm




10 20 30 40 50 60 70 80 90 100 110 120 130mm 14017


LBNCOVER Individual

BNCOVER7-2 Pair of Covers with 'O' Rings

BNCOVER7-3 Set of 3 Covers with 'O' Rings

Bleed Nipple Covers

Keeps dust and grime away from your nipples! Slides straight onto the bleed nipple and held securely in place with the 'O' ring supplied. Fits the most popular 7mm bleed nipples.


PCLIP10 Rubber lined P-Clips

P Clips


LDCAP10 Individually

2DCAP10 Pair of Dust Caps

4DCAP10 Set of 4 Dust Caps

Tyre Valve Covers

Form an airtight seal and keep out the dirt with our Tyre Valve Covers - universal fi t for bikes, cars and cycles.

Flared Washers

‘Chunky’ Cup Washer, designed to accept either a standard M6 Socket Cap Bolt or a Countersunk Bolt. The outside diameter measures 25mm and has a height of 7mm. Excellent for spreading the load on deeper recessed panels.



Aluminium

AL

UM

INIU

M

Anodised Aluminium rubber lined P-Clips for securing rear brake lines.


BOLTS

Part Number

Thread Diameter/Pitch

Allen Key Drive

Max Head Diameter

Lengths Available

LSSSC5** M5 x 0.8mm 4mm 7.9mm 10mm, 12mm, 15mm, 20mm,

25mm, 30mm


25mm, 30mm, 35mm, 40mm,

45mm, 50mm, 55mm, 60mm,

65mm, 70mm, 75mm, 80mm,

85mm, 90mm, 95mm


35mm, 40mm, 45mm, 50mm,

55mm, 60mm, 65mm, 70mm,

75mm,

LSSSC10** M10 x 1.50mm 8mm 15.8mm 20mm, 25mm

LSSSC10**F M10 x 1.25mm 8mm 15.8mm 20mm, 25mm, 30mm, 35mm,

40mm, 45mm, 50mm, 55mm,

60mm, 65mm, 70mm, 75mm,

80mm, 85mm

Tapered Socket Cap Length measurements are taken from below the head

Part Number


Socket Size

Max Head Diameter

Lengths Available

LSSHX5** M5 x 0.8mm 7mm 9.9mm 10mm, 12mm, 15mm, 20mm, 25mm,

30mm, 35mm


30mm, 35mm, 40mm, 45mm, 50mm,

55mm, 60mm, 65mm, 70mm, 75mm,

80mm, 85mm, 90mm


40mm, 45mm, 50mm, 55mm, 60mm,

65mm, 70mm, 75mm

LSSHX10** F M10 x 1.25mm 13mm 17.8mm 20mm, 25mm, 30mm, 35mm, 40mm,

45mm, 50mm, 52mm, 55mm, 57mm,

60mm, 65mm, 70mm, 75mm, 80mm

Flanged Hex Head Length measurements are taken from below the head

Part Number


Allen Key Drive

Max Head Diameter

Lengths Available

LSSCS5** M5 x 0.8mm 3mm 10.0mm 15mm, 20mm, 25mm

LSSCS6** M6 x 1.00mm 4mm 12.0mm 15mm, 25mm, 30mm, 35mm,

40mm, 60mm

LSSCS8** M8 x 1.25mm 5mm 15.7mm 30mm, 40mm

Countersunk Bolts Length measurements are taken including the head

** Denotes length to be selected.

STAINLESS STEEL

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14019

Part Number


Socket size

Max Head Diameter

Lengths Available

LSSHX6**R M6 x 1.00mm 8mm 11.0mm 10mm, 15mm, 20mm,

25mm

LSSHX8**R M8 x 1.25mm 10mm 15.0mm 25mm, 30mm, 35mm,

40mm, 45mm

LSSHX10**R M10 x 1.50mm 12mm 17.0mm 25mm

LSSHX10**FR M10 x 1.25mm 12mm 17.0mm 30mm, 60mm, 65mm,

70mm, 75mm

Race Spec Bolts Length measurements are taken from below the head

Part Number


Allen key size

Max Head Diameter

Lengths Available

LSSPB5** M5 x 0.8mm 4mm 8.0mm 8mm, 10mm, 12mm,

16mm, 20mm, 25mm,

30mm

LSSPB6** M6 x 1.00mm 5mm 10.0mm 10mm, 12mm, 16mm,

20mm

LSSPB8** M8 x 1.25mm 6mm 12.5mm 40mm, 45mm

LSSPB10** M10 x 1.25mm 8mm 25mm 60mm

Parallel Head Bolts Length measurements are taken from below the head

Part Number


Socket size

Max Head Diameter

Lengths Available

LSSSK6** M6 x 1.00mm 6mm 10.0mm 10mm, 12mm, 15mm,

20mm, 25mm, 27mm,

30mm, 35mm, 40mm,

45mm, 50mm, 55mm,

60mm, 65mm, 70mm,

75mm, 80mm, 85mm,

90mm

Spike Head Bolts Length measurements are taken from below the head

STA

INL

ES

S S

TE

EL


Stainless Steel

See page 76 for our UNC Imperial range.


Part Number Size Outside Diameter Thickness

LSSWAC5-15 M5 15mm 4mm

LSSWAC6-19 M6 19mm 4.5mm



Countersunk Washers

Part Number


Allen Key Drive

Max Head Diameter

Lengths Available

LSSFB412F M4 (0.50) 3mm 8mm 12mm

LSSFB5** M5 (0.8) 4mm 12mm 12mm, 16mm, 20mm, 25mm

LSSFB516XL M5 (0.8) 4mm 16mm 16mm

LSSFB6** M6 (1.00) 5mm 16mm 16mm, 20mm, 25mm, 30mm,

35mm, 40mm

LSSFB6**XS M6 (1.00) 5mm 12mm 16mm, 20mm, 30mm

LSSFB8** M8 (1.25) 5mm 16mm 20mm, 25mm, 30mm, 35mm,

40mm

LSSFB10**F M10 (1.25) 6mm 18mm 25mm, 30mm, 35mm


STAINLESS STEEL

Part Number Thread/Pitch Socket Size

LSSFLN5 M5 x 0.8mm 8mm




LSSFLN10F M10 x 1.25mm 14mm

LSSFLN10FF M10 x 1.00mm 14mm

LSSFLN12FF M12 x 1.25mm 15mm

Flanged Nuts

Part Number Inside Diameter

Outside Diameter

Thickness

LSSWA6 6mm 12mm o/d 1.6mm

LSSWA6-15 6mm 15mm o/d 1.6mm



Flat Washers

Part Number Thread/Pitch Socket Size

LSSDOMENUT6 M6 x 1.00mm 10mm

LSSDOMENUT8 M8 x 1.25mm 13mm

Dome Nuts

NUTS & WASHERS

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14021


Stainless Steel

STA

INL

ES

S S

TE

EL


A New Generation of Bolt!Our Race-Spec bolts are designed for professionals, enthusiasts and those who like attention to detail. By reducing the socket size/head diameter and machining out the head, we have achieved a significant weight saving. On average these bolts weigh 45% less than steel equivalents without any compromise in strength or durability.

These products have been developed at the cutting edge of competition and the qualities are recognized and widely used by top Race Teams internationally.

It is possible to save an amazing two kilos on an average motorcycle. This range of bolts are supplied 'off the machine with no polishing' to give the factory look.

Length measurements are taken from below the head.

RACE SPEC HEX HEAD

RACE-SPEC

Part Number

Diameter & Thread

Length Thread Length

Head Diameter

Socket Size

TIHX510R M5 x 0.8mm 10mm 10mm 10mm 7mm






































TITA

NIU

M

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14023

ALL AVAILABLE IN MACHINE FACTORY FINISH

Titanium












TIHX1020FR M10 x 1.25mm 20mm 20mm 17mm 12mm















Part Number

Diameter & Thread

Length Thread Length

Head Diameter

Socket Size

Selected lengths now available in Stainless Steel (See page 19).

TITANIUM PARTS


Part Number

Thread & Pitch

Allen Key Drive

Max Head Diameter

Lengths Available

TISC4** M4 x 0.70mm 3mm 6.9mm 10mm, 12mm, 15mm, 20mm, 25mm, 35mm

TISC5** M5 x 0.80mm 4mm 7.9mm 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 70mm

TISC6** M6 x 1.00mm 5mm 9.9mm 10mm, 12mm, 15mm, 20mm, 22mm, 25mm, 28mm 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm

TISC720 M7 x 1.00mm 5mm 9.9mm 20mm

TISC8** M8 x 1.25mm 6mm 12.5mm 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm

TISC10** M10 x 1.50mm 8mm 15.8mm 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 70mm, 75mm, 80mm

TISC10**F M10 x 1.25mm 8mm 15.8mm 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm

Tapered Socket Cap Length measurements are taken from below the head

BOLTS

Part Number

Thread & Pitch

Socket Size

Flange Diameter

Lengths Available

TIHX4** M4 x 0.70mm 6mm 8mm 10mm, 15mm, 20mm, 25mm

TIHX5** M5 x 0.80mm 7mm 10mm 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 40mm, 45mm

TIHX6** M6 x 1.00mm 8mm 12mm 10mm, 12mm, 14mm, 15mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 32mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm, 115mm

TIHX8** M8 x 1.25mm 12mm 16mm 15mm, 20mm, 25mm, 28mm, 30mm, 32mm, 35mm, 40mm, 45mm, 47mm, 50mm, 55mm, 60mm, 65mm, 70mm, 80mm, 85mm

TIHX10** M10 x 1.50mm 12/13mm 18mm 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55m, 60mm, 65mm , 70mm, 75mm

TIHX10**F M10 x 1.25mm 12/13mm 18mm 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 57mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm, 110mm, 112mm, 115mm, 125mm

TIHX12**FF M12 x 1.25mm 14mm 20mm 50mm, 60mm, 70mm, 80mm, 90mm

Flanged Hex Head Length measurements are taken from below the head

** Denotes length to be selected

TITA

NIU

M


Titanium

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14025

Part Number

Thread & Pitch

Allen Key Drive

Max Head Diameter

Lengths Available

TICS3** M3 X 0.60mm 2mm 5.8mm 10mm, 15mm,

TICS4** M4 X 0.70mm 2.5mm 7.8mm 15mm, 20mm, 45mm, 50mm

TICS5** M5 x 0.80mm 3mm 9.8mm 8mm, 10mm, 15mm, 20mm,

25mm, 30mm,

TICS6** M6 x 1.00mm 4mm 11.8.mm 15mm, 20mm, 25mm, 30mm,

35mm, 40mm, 45mm

TICS8** M8 x 1.25mm 5mm 15.6mm 20mm, 25mm, 30mm, 35mm,

40mm, 45mm, 50mm, 55mm

TICS10** M10 x 1.50mm 6mm 19.9mm 25mm, 30mm

TICS10**F M10 x 1.25mm 6mm 19.9mm 20mm, 30mm

Countersunk Bolts Length measurements include the head

Part Number

Thread & Pitch

Allen Key Drive

Max Head Diameter

Lengths Available

TIFB412F M4 x 0.50mm 3mm 8mm 12mm

TIFB4** M4 x 0.70mm 3mm 8mm 10mm, 12mm, 15mm

TIFB5** M5 x 0.80mm 4mm 12mm 10mm, 16mm, 20mm, 25mm,

30mm

TIFB516XL M5 x 0.80mm 4mm 16mm 16mm

TIFB6* M6 x 1.00mm 5mm 16mm 10mm, 16mm, 20mm, 25mm,

30mm, 35mm, 40mm, 55mm

TIFB6**XS M6 x 1.00mm 5mm 12mm 20mm, 30mm

TIFB8** M8 x 1.25mm 5mm 16mm 20mm, 25mm, 30mm, 35mm

40mm, 85mm


TITANIUM PARTS


Part Number Thread & Pitch Socket Size

TIFN4 M4 (0.70 pitch) Full Nut 7mm





TIFN10F M10 (1.25 pitch) Full Nut 17mm


TIFN12F M12 (1.50 pitch) Full Nut 18mm

Full Nuts

NUTS


TIFLN5 M5 (0.80 pitch) Flanged Nut 8mm




TIFLN10F M10 (1.25 pitch) Flanged Nut 14mm

TIFLN10FF M10 (1.00 pitch) Flanged Nut 14mm


TIFLN12F M12 (1.50 pitch) Flanged Nut 17mm

TIFLN12FF M12 (1.25 pitch) Flanged Nut 17mm

Flanged Nuts


TINYN4 M4 (0.70 pitch) Nyloc Nut 7mm





TINYN10F M10 (1.25 pitch) Nyloc Nut 16mm


TINYN12F M12 (1.50 pitch) Nyloc Nut 20mm

TINYN12FF M12 (1.25 pitch) Nyloc Nut 20mm

Nyloc Nuts

Note: Also refer to our axle nuts on page 54/55 where larger sizes are available.

26


TINYNFL5 M5 (0.80 pitch) Flanged Nyloc Nut 8mm



TINYNFL8F M8 (1.00 pitch) Flanged Nyloc Nut 13mm





TINYNFL12FF M12 (1.25 pitch) Flanged Nyloc Nut 18mm

Flanged Nyloc Nuts

TITA

NIU

M


Titanium

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14027

Bi-Hex Plastic Nyloc NutsPart Number Thread & Pitch Socket Size

TINYNFLBH6 M6 (1.00 pitch) Flanged Bi-Hex Plastic Nyloc 11mm



TINYNFLBH10F M10 (1.25 pitch) Flanged Bi-Hex Plastic Nyloc 15mm

TINYNFLBH10FF M10 (1.00 pitch) Flanged Bi-Hex Plastic Nyloc 15mm


TILOCKNUTBH6 M6 (1.00) Flanged Bi-Hex Metal Locknut 11mm



TILOCKNUTBH10F M10 (1.25) Flanged Bi-Hex Metal Locknut 15mm

Bi-Hex Metal Lock Nuts

Metal Lock NutsPart Number Thread & Pitch Socket Size

TILOCKNUT6 M6 (1.00 pitch) Flanged Metal Locknut 10mm



TILOCKNUT10F M10 (1.25 pitch) Flanged Metal Locknut 14mm

TITANIUM PARTS


WASHERS

Flat WashersPart Number Description Outside

Diameter Thickness

TIWA3 M3 Flat Washer 7mm 0.6mm










Part Number Description Outside Diameter

Thickness

TIWAC6-22 M6 Countersunk Washer 22mm 4.5mm

Countersunk Washers

Penny Washers


Thickness

TIWA5-15 M5 Penny Washer 15mm 1.0mm






Spring Washers


Thickness

TIWAS10 M10 Spring Washer 16mm 2.6mm



TIWAS16 M16 spring washer 24mm 4.0mm

Drilled Washers


Thickness

TIWAD5 M5 Drilled Washer 10mm 1.0mm






28

TITA

NIU

M

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14029

Rods

Part Number Diameter & Length

TIROD3.2-240 Rod - M3.2 Diameter - approx 240mm Length

TIROD4-240 Rod - M4 Diameter - approx 240mm Length





TIROD12.7-240 Rod - M12.7 Diameter - approx 240mm Length




TIROD5-1000 Rod - M5 Diameter - 1 Metre Length








We off er Titanium Rod in 240mm or 1m lengths.

Note: We would advise that care be taken when machining Titanium as it is fl ammable and ideally requires cooling. Wear on tooling is also extensive.

RODS

Note: Sizes are approx as these are ‘ends’.

ALL AVAILABLE IN MACHINE FACTORY FINISH

Titanium


Makes removal of bodywork easy and fast. Supplied individually or in packs and in all materials. Available materials, packs and lengths are listed below – choose from D-Ring, Scalloped Head or Allen Key Drive, all with a superb finish (17mm is the most popular, 14mm is the most common for thinner race fairings).

D-RingPart Number Description

LQRCLIP14 14mm Individual D-Ring Quick Release Fastener



QRCLIP1014 Packs of 10 - D-Ring 14mm Quick Release Fasteners

& Washers


& Washers


& Washers

Can also be purchased in packs complete with backing clips

QRPACKRIVET** Pack of 10 D-Ring Fasteners with Rivet-on Backing Plates

and Rivets & Washers

QRPACKSLIDE** Pack of 10 D-Ring Fasteners with Slide-on Backing Plates

& Washers

Alley Key Drive


LQRCLIPAK14 14mm Individual Allen Key Quick Release Fastener





QRCLIPAK1014 Packs of 10 - Allen Key 14mm Quick Release Fasteners

with Washers


with Washers


with Washers


with Washers


with Washers

Can also be purchased in packs complete with backing clips

QRPACKAKRIVET** Pack of 10 D-Ring Fasteners with Rivet-on Backing Plates,

Rivets and Washers

QRPACKAKSLIDE** Pack of 10 D-Ring Fasteners with Slide-on Backing Plates

and Washers

QUICK RELEASE 1/4 TURN FASTENERS

Note: We also offer the slide-on & rivet-on backing clips individually, Please see page 74/75

QUICK RELEASE FASTENERS



Aluminium

** Required length

** Required length

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14031

D-Ring


LSSQRCLIP14 14mm Length D-ring Quick Release Fastener



SSQRCLIP1017 17mm D-ring Quick Release Fastener - Pack of 10

SSQRCLIP1417 17mm D-ring Quick Release Fastener - Pack of 14

SSQRPACKRIVET1017 17mm D-ring Quick Release Fastener - Pack of 10 with Rivet on Backs & Washers

SSQRPACKRIVET1417 17mm D-ring Quick Release Fastener - Pack of 14 with Rivet on Backs & Washers

SSQRPACKSLIDE1017 17mm D-ring Quick Release Fastener - Pack of 10 with Slide on Backs & Washers

SSQRPACKSLIDE1417 17mm D-ring Quick Release Fastener - Pack of 14 with Slide on Backs & Washers

Alley Key DrivePart Number Description

LSSQRCLIPAK14 14mm Allen Key Drive Quick Release Fastener



SSQRPACKAKRIVET1017 17mm Allen Key Quick Release Fastener - Pack of 10 with Rivet on Backs & Washers

SSQRPACKAKRIVET1417 17mm Allen Key Quick Release Fastener - Pack of 14 with Rivet on Backs & Washers

SSQRPACKAKSLIDE1017 17mm Allen Key Quick Release Fastener - Pack of 10 with Slide on Backs & Washers

SSQRPACKAKSLIDE1417 17mm Allen Key Quick Release Fastener - Pack of 14 with Slide on Backs & Washers

17mm is the perfect length and look for the MV Agusta F4 and the Ducati 748/916/996 range.

D-Ring


LDZUS-PANEX10 Individual Black Zinc Coated Steel D-Ring Quick Release Fastener

QRSTEEL17SETBK Pack of 10 Black Steel 17mm Fasteners, Rivet on Backs and

Rivets & Washers

QRSTEELSETSLIDE Pack of 10 Black Steel 17mm Fasteners, Slide on Backs and

Rivets & Washers

Black Zinc Coated Steel Quick Release Fasteners. Strong and durable cost eff ective option, available in 17mm only – the most popular length.

D-Ring


TIQRCLIP17 17mm Titanium Quick Release Stud - D Ring

TIQRCLIP19 19mm Titanium Quick Release Stud - D Ring

AVAILABLE IN BLACK ZINC COATED

Black Zinc Coated Steel

QU

ICK

RE

LE

AS

E F

AS

TE

NE

RS


Titanium


Stainless Steel

Allen Key DrivePart Number Description

TIQRCLPAK17 17mm Titanium Quick Release Stud -

Allen Key Drive


We offer a variety of tubs and workshop kits in aluminium. Ideal for spares in the workshop or for that special project – just choose your preferred quantity, colour and bolt combination.

25pc Workshop Kit

Supplied with Copper Grease Lubricant, Allen Keys and Stickers

• WSKIT25 Assortment of 5mm, 6mm & 8mm Allen Bolts, Fairing Bolts, Nuts and Washers.

100pc Workshop Tubs

WORKSHOP ASSORTMENTS

WORKSHOP KITS

Supplied in a handy tub with Allen Keys and Copper Grease containing the following:

Allen Key Socket Cap Bolt Tub• PBTUBALLEN 100 pc Metric Socket Cap Allen Key Bolt Tub - M5 - M8

Dome Head/Fairing Bolt Tub• PBTUBFAIR 100 pc Metric Dome Head Allen Key Bolt Tub - M5 - M8

Mixed Bolt Tub• PBTUBMIXED 100 pc Metric Assorted Dome Head & Socket Cap Allen

Key Bolt Tub - M5 - M8

Nut & Washer Tub• PBTUBNUTS 100 pc Metric Assorted Full Nuts, Nyloc Nuts, & Washers

- M5 - M8

Dome Nut Tub• PBTUBDOMENUT 100 pc Metric Assorted Dome Nuts - M4 - M5 - M6 - M8

- M10 - M10 Fine

Drilled Washer Tub• PBTUBWAD 100 pc Drilled Washer Tub - M5 - M12

Threaded Collar Tub• PBTUBCOLLAR 100 pc Threaded Collar Tub - M5 & M6 various outside

diameters & lengths for use as spacers, shoulders and collars. Supplied only in natural finish. Please note: Colour options are not available.

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14033

200pc Workshop Box

Ideal for large scale projects. Excellent value for money, presented in a convenient cabinet and comprises of the following:

• BCAB500 Allen Bolts, Dome Head Bolts, Countersunk Bolts, Nuts and Washers in 5mm, 6mm and 8mm sizes in their most popular lengths. Also comes with Allen Keys, Copper Grease Lubricant, Anti-Scratch Washers and Pro-Bolt stickers.

500pc Workshop Cabinet



Aluminium

WO

RK

SH

OP

KIT

S

Complete with Allen Keys, Copper Grease Lubricant, Anti-Scratch Washers and Pro-Bolt Stickers. Contains the following:

• WSBOX200 (In our handy Workshop Box we supply) Allen Bolts, Dome Head Bolts, Nuts, Washers, Countersunk Bolts, Countersunk Washers and Cup Washers in the most popular sizes.


We offer a variety of tubs and workshop kits in Stainless Steel. Ideal for spares in the workshop or for special projects. Exact contents are available on-line and can be amended if desired, with the agreement of Pro-Bolt.

50pc Workshop Kit

Supplied with Copper Grease Lubricant, Allen Keys and Stickers containing the following:

• SSWSBOX50 Comprises: 10 Nuts • 10 Washers 10 Countersunk Bolts 10 Flanged Hex Head Bolts 10 Tapered Socket Caps Bolts

100pc Workshop Tubs

Supplied with Allen Keys, Copper Grease Lubricant, Anti-Scratch Washers and Pro-Bolt Stickers containing the following:

• SSWSBOX200 Comprises: 25 Assorted Washers - M5 - M10 25 Countersunk Bolts 30 Assorted Nuts - M5 - M10 60 Flanged Hex Head Bolts - M5 - M10 60 Tapered Socket Cap Bolts - M5 - M10

200pc Workshop Box

Supplied in a handy tub with Allen Keys and Copper Grease containing the following:

Allen Key Socket Cap Bolts• SSTUBALLEN 100 pc Metric Tapered Socket Cap Allen Key

Bolt Tub - M5 - M8

Dome Head/Fairing Bolts• SSTUBFAIR 100 pc Metric Dome Head Allen Key Bolt

Tub - M5 - M8

Mixed Bolt Tubs• SSTUBMIXED 100 pc Metric Assorted Dome Head & Tapered

Socket Cap Allen Key Bolt Tub - M5 - M8


Stainless Steel

WORKSHOP KITS


Titanium

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14035

In our Titanium workshop boxes we provide a selection of our most popular parts. Exact contents are available on-line and can be amended if desired, with the agreement of Pro-Bolt.

50pc Workshop Box


• TIWSBOX100 Comprises:15 Assorted Washers10 Countersunk Bolts25 Assorted Nuts25 Flanged Hex Head Bolts25 Tapered Socket Cap Bolts

100pc Workshop Box

200pc Workshop Box

Supplied with Copper Grease and Stickers, containing the following:

• TIWSBOX100RS Race-Spec Flanged Hex Head BoltsM5 - M10

100pc Flanged Hex Head'Race-spec' Workshop Box


• TIWSBOX50 Comprises:10 Nuts 10 Washers 10 Countersunk Bolts 10 Flanged Hex Head Bolts 10 Tapered Socket Caps Bolts

Supplied with Allen Keys, Copper Grease Lubricant, Anti-Scratch Washers and Pro-Bolt Stickers containing the following:

• TIWSBOX200 Comprises:25 Assorted Washers - M5 - M1025 Countersunk Bolts30 Assorted Nuts - M5 - M1060 Flanged Hex Head Bolts - M5 - M1060 Tapered Socket Cap Bolts - M5 - M10

WO

RK

SH

OP

KIT

S


FULL MONTY BOLT KITS

All our non-stress area Bolt Kits are available in one easy pack which includes: Side Engine Casing Kit, Fairing Bolt Kit, Screen Bolt Kit, Fuel Cap Kit, Mudguard/Hugger Kit and Number Plate Kit. You can ensure a colour consistent finish throughout. We also include a complementary selection of 20 bolts - assorted Dome Head and Socket Cap Bolts, which can be used as spares or used in other non stress areas (for example Heel Guards, Mudguards and Chain Guards).

Choose from our coloured Aluminium or polished Stainless Steel Ranges.


Stainless Steel



Aluminium

MOTORCYCLE PARTS

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14037

Our aluminium Accessory Kits are available in one easy pack. Products vary slightly, so please ask for exact contents or view specifi c model on-line. Achieve a colour consistent look throughout your bike – excellent gift idea! Also included is a complementary selection of 20 bolts – assorted Dome Head and Socket Cap Bolts which can be used as spares or in non stress areas (for example, Heel Guards, Mudguards and Chain Guards).

FULL MONTY ACCESSORY KITS



Aluminium

MO

TO

RC

YC

LE

PA

RT

S


ENGINE CASING KITS



Aluminium


Stainless Steel


Titanium

Our Engine Kits include all the necessary bolts to replace all side engine-casing bolts in your chosen colour. Also included are Copper Grease Lubricant and the necessary Allen Keys. Kits are easy to use – remove one bolt at a time, and replace with the identical length bolt from your Pro-Bolt kit.

All Engine Kits are supplied using Allen Key Bolts. Where fitment will allow, we also offer Flanged Hex Head kits.

Please note: Oil Filler Caps and Cam Cover Bolts are sold separately.

MOTORCYCLE PARTS

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14039

CAM COVER BOLTS

DescriptionStainless Steel Part Number

Single Top Cylinder Head Bolt SSSITEM1

Set of 8 Cylinder Head Bolt SSSITEM1-8

Single Side Cam Bolt SSSITEM3

Set of 4 Side Cam Bolts SSSITEM3-4

Complete set of 8 Top & 4 Side SSSITEM13FULL

An absolute must for any GSXR & Bandit. Replace dull and rusty Cam Cover bolts. Our bolts are supplied in a smooth polished fi nish. Available individually or as a full set of 12 (8 top & 4 side). The fi nishing touch to any engine!

Suzuki Bandit/GSXR

Stainless Steel

Description Aluminium Part Number

Individual LSPYAM10

Set of 8 SPYAM10-8

Yamaha Fazer XJR

Available individually or as a set of 8. Fits: Fazer 600, Fazer 1000, XJR1200 & XJR1300

SUMP BOLTS

Part Number Thread & Pitch

TISUMP1215MAG M12 x 1.50mm x 15mm

TISUMP1412MAG M14 x 1.50mm x 12mm

TISUMP1412FMAG M14 x 1.25mm x 12mm

Sump Bolts

Our Sump Bolts are pre-drilled on all flats for ease of lockwiring. They are also fitted with a magnetic stud to assist with removing particles from the engine oil, which could potentially be damaging. See our model specific price list for detailed fitment information.

Note: As these items are fi tted with a magnetic stud, we are not able to off er an anodised fi nish as this would interfere with the anodising process.

AVAILABLE ONLY IN NATURAL

Titanium


Stainless Steel



Aluminium

MO

TO

RC

YC

LE

PA

RT

S

Aluminium


Oil Filler Caps

OIL FILLER CAPS

Machined to a smooth finish in your choice of colour – complete with 'O' ring. Each has a hole drilled in the top corner to allow the use of lock wire – complements our engine casing bolt kits to achieve the finished look. 13 fitments available to cover a wide range of models.

Part Number Description Thread & Pitch

LOFCB10 BMW/F650 etc M24mm x 3.00mm

LOFCB20 BMW/R1200GS etc M34mm x 1.50mm

LOFCB30 BMW/S1000R M24mm x 2.00mm

LOFCH10 Honda Standard - some Triumph M20mm x 2.50mm

LOFCH20 Honda BlackBird/VFR Etc M22mm x 3.00mm

LOFCY10 Yamaha Standard M27mm x 3.00mm

LOFCY20 Yamaha XJR1300 M25mm x 1.00mm

LOFCY30 Yamaha R1 (2004+) M27mm x 3.00mm

LOFCK10 Kawasaki Standard M30mm x 1.50mm

LOFCK20 Kawasaki ZX7R M38mm x 1.50mm

LOFCK30 Kawasaki ZX9R (98) M20mm x 2.00mm

LOFCS10 Suzuki & some Aprilia M20mm x 1.50mm

LOFCD1O Ducati & some Aprilia M22mm x 1.50mm

MOTORCYCLE PARTS



Aluminium

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14041

Our Fairing Kits include all the necessary bolts and anti-scratch washers to replace bolts on the Top and Side Fairing, Seat Unit, Belly Pan, Mudguard & Hugger. Allen Keys, Pro-Lube & Stickers are also included in the kits. Replacement backing clips are not included as standard – our bolt kits will screw into the original backing clips. Where this is not possible, we do provide replacement nuts or clips for behind the fairing.

Don't forget to order your matching Screen Kit!

FAIRING BOLT KITS

Note: Backing clips are available to order separately in our ancillary section on page 74/75


Titanium

MO

TO

RC

YC

LE

PA

RT

S


Stainless Steel



Aluminium

TITANIUM PARTS


Our Quick Release Fairing Kits will provide D-Ring 1/4 turn replacements where quick release are present as standard. All other bolts on the Side Fairing, Mudguard, Belly Pan and Seat Unit will be replaced with standard threaded bolts. This will provide a colour consistent finish throughout the fairing.

1/4 TURN QUICK RELEASE FAIRING KITS

Al l Mater ia ls

ALUMINIUM: BLACK • BLUE • GOLD • GUNMETAL GREY


STAINLESS STEEL: ALL AVAILABLE IN POLISHED STAINLESS

TITANIUM: BLUE • GOLD • NATURAL • PURPLE HAZE

Note: Slide-On & Rivet-On backing plates are available on page 74/75

Model of BikeAluminium D-Ring Aluminium

Allen Key DriveStainless Steel D-Ring

Stainless Steel Allen Key Drive

Titanium D-Ring

ApriliaRSV Mille (00-02) FOAP100QR FOAP100QRAK FOAP100QRSS FOAP100QRAKSS FOAP100QRTI

RSVR (02-03) FOAP110QR FOAP110QRAK FOAP110QRSS FOAP110QRAKSS FOAP110QRTI

RSVR Factory (05) FOAP120QR FOAP120QRAK FOAP120QRSS FOAP120QRAKSS FOAP120QRTI

RSVR Factory (06+) FOAP130QR FOAP130QRSS FOAP130QRTI

Ducati748/916/996 FDU032QR FDU032QRAK FDU032QRSS FDU032QRAKSS FDU032QRTI

749R FDU110QR FDU110QRSS FDU110QRTI

999R FDU150QR FDU115QRSS FDU115QRTI

HondaVFR400/NC30 FHO040QR FHO040QRAK FHO040QRSS FHO040QRAKSS FHO040QRTI

RVF400R/NC35 FHO042QR FHO042QRAK FHO042QRSS FHO042QRAKSS FHO042QRTI

VFR750 (94/97) FHO135QR FHO135QRAK FHO135QRSS FHO135QRAKSS FHO135QRTI

TriumphDaytona 955i FTR082QR FTR082QRAK FTR082QRSS FTR082QRAKSS FTR082QRTI

T595/955i FTR120QR FTR120QRAK FTR120QRSS FTR120QRAKSS FTR120QRTI

YamahaR1 (98-99) FYA397QR FYA397QRAK FYA397QRSS FYA397QRAKSS FYA397QRTI

R1 (00-01) FYA398QR FYA398QRAK FYA398QRSS FYA398QRAKSS FYA398QRTI





MV AgustaF4 FMVA100QR FMVA100QRAK FMVA100QRSS FMVA100QRAKSS FMVA100QRTI

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14043

Screen Kits include the specifi ed amount of 5mm Screen Bolts, Nylon Washers and Rubber Nuts with Brass Insert. 4mm fi ne pitch Screen Kits are also available for Ducati, MV Agusta, Cagiva and Aprilia Factory RSVR. Finish the look with our model specifi c Fairing Bolt Kits.

SCREEN BOLT KITS

DescriptionAluminium Part Number

Stainless Steel Part Number

Titanium Part Number

4 Bolt Standard Kit SK4 SK4SS TISK4







7 Bolt 4mm Diameter Fine Pitch Special Kit SKDUC7 SKDUC7SS TISKDUC7



Al l Mater ia ls

ALUMINIUM:BLACK • BLUE • GOLD • GUNMETAL GREY


STAINLESS STEEL:ALL AVAILABLE IN POLISHED STAINLESS

TITANIUM:BLUE • GOLD • NATURAL • PURPLE HAZE

MO

TO

RC

YC

LE

PA

RT

S


These are the bolts that fit into the fuel cap surround - they are available for all bikes including the specially engineered Honda bolts. Kits are very easy to fit - remove one bolt at a time and replace with the identical length Pro-Bolt.

FUEL CAP BOLT KIT

MOTORCYCLE PARTS


Stainless Steel



Aluminium

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14045

BAR ENDS

Replace lost or damaged Steel Bar Ends and put some colour where you can see it! Smooth fi nish and comes complete with necessary fi ttings.

MO

TO

RC

YC

LE

PA

RT

S



Aluminium


Pair of Bar Ends for Hollow Bars BARENDUN10

Pair of Yamaha Bar Ends - R1 etc BARENDYA10

Pair of Yamaha Bar Ends - R6 etc BARENDYA20

Pair of Kawasaki Bar Ends - ZX6 / ZX9 BARENDKA10

Pair of Kawasaki Bar Ends - ZX7 / ZX12 BARENDKA20

Pair of Kawasaki Bar Ends - GPZ / Z1000 / ZZR BARENDKA30

Pair of Kawasaki Bar Ends - ZX10R (2006) BARENDKA40

Pair of Honda Bar Ends - CBR600 / CBR900 etc BARENDHO10

Pair of Honda Bar Ends - SP1/SP2 BARENDHO20

Pair of Honda Bar Ends - Hornet '07 BARENDHO30

Pair of Aprilia Bar Ends - RSV Mille etc BARENDAP10

Pair of Aprilia Bar Ends - RS125 / Pegaso BARENDAP20

Pair of Aprilia Bar Ends - RSV/Factory/Tuono BARENDAP30

Pair of Suzuki Bar Ends - GSXR600 K1/K2 BARENDSU10

Pair of Suzuki Bar Ends - SV650/GSXR750/SRAD/GSXR1100 - etc BARENDSU20

Pair of Suzuki Bar Ends - SV650 / SV1000 / TL1000 etc BARENDSU30

Pair of Suzuki Bar Ends - GSXR1300 etc BARENDSU40

Pair of Suzuki Bar Ends - GSXR600 etc BARENDSU50

Pair of Suzuki Bar Ends - GSXR1000 K6/Other BARENDSU60

Pair of BMW bar Ends - F650/F800GS BARENDBM10

Pair of BMW Bar Ends - S1000RR BARENDBM20


TOP YOKE NUTS

Replace damaged or rusty Centre Stem Nuts with something rather more colourful. See our price list for fitment details.

DescriptionThread & Pitch

Socket Size

Aluminium Part Number


Domed with Breather Hole 24mm x 1.00 30mm LTYOKE10

Domed 24mm x 1.00 30mm N/A TIYOKE10

Domed 25mm x 1.00 36mm LTYOKE20 TIYOKE20




Domed with Breather Hole 22mm x 1.00 30mm LTYOKE50D TIYOKE50D

Triumph Top Yoke Nut 22mm x 1.25 N/A LTYOKE100 N/A

Top yoke nuts

MOTORCYCLE PARTS



Aluminium


Titanium

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14047

PRE-LOAD ADJUSTERS

HEXAGON FITMENTDescription


Pre-Load 14mm PLOAD14

Pre-Load 14mm - Thinner Fork Tops PLOAD14-T




They look fantastic and are also functional. Allows easy adjustment of fork spring compression, to adapt to pillion passengers and diff erent road types. Supplied with steel grub screws to hold in place and an allen key to fi t. Sizes available to fi t most models.

Please Note: These may not be compatible if a steering damper is fi tted.

MO

TO

RC

YC

LE

PA

RT

S



Aluminium

FLAT/ROUNDED FITMENTDescription


Pre-Load 18/14mm PLOAD1814

Pre-Load 20/17mm PLOAD2017

Example: PLOAD14 - 14mm

14mm

Example: PLOAD1814 - 18/14mm14mm18mm


CABLE ADJUSTERS

DIAL ADJUSTERS

Exact replicas of the originals – easy to replace and colour where you can see it!

Used on many models of Honda, Kawasaki, Suzuki & Yamaha.


1-4 position Dial Adjuster - many Suzuki LDA10

1-5 position Dial Adjuster - some Kawasaki LDA30

'Spin' type Dial Adjuster - many Honda & Kawasaki LDA20


2 piece M8 thread LCA10

1 piece M10 thread LCA20

MOTORCYCLE PARTS



Aluminium

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14049

RESERVOIR CAPS


Threaded Round Cap - 61mm o/d RESR10

2 Screws Round Cap - 56mm o/d - with 50mm bolts RESR20

2 Screws Round Cap - 56mm o/d - with 15mm bolts RESR20-CS415

2 Screws Round Cap - 56mm o/d - with 45mm bolts RESR20-CS445



2 Screws 2 x 45 Round Cap - 53mm o/d Brembo RESR60

Threaded Round Cap - 39mm o/d Brembo RESR70



Oblong 43 x 75mm RESO10

Oblong 37 x 55mm - with 15mm Bolts RESO20

Oblong 37 x 55mm - with 20mm Bolts RESO20-20

Oblong 37 x 55mm - with 45mm Bolts RESO20-45




Superb smooth fi nish in a colour of your choice – literally in your face! Get rid of ugly plastic stock originals. We off er a wide range of Reservoir Caps to fi t front brake, clutch and rear brake cylinders on a wide range of models. Comes complete with Countersunk Bolts where necessary. Measurements are the outside diameter.

RESERVOIR CLIPS

To complement our top selling Reservoir Cap, this clip works with our Reservoir Cap part number ‘RESR10’. This will replace your original mild steel clip – choose a complementing or contrasting colour to your Reservoir Cap. Supplied with matching bolt.

MO

TO

RC

YC

LE

PA

RT

S



Aluminium


Nice touch to customise your machine and easy to fit. When fitting, allow that one end will be a reverse thread.

Male 6mm rods are supplied with standard and left hand thread nuts to complete the look.

For reference purposes and for customised projects, we list below total length and specify whether fitment is male or female.

GEAR SHIFT RODS


Gear Shift Rod Female - 6mm Thread/6mm Thread - 145mm Overall Length GRODF66145














Gear Shift Rod Male - 6mm Thread/6mm Thread - 140mm Overall Length GRODM66140









PADDOCK STAND BOBBINS

Essential for all bikers! Screws straight into the swingarm, showing no ugly steel bolts. Available in M6, M8 & M10 .


Pair of M6 Paddock Stand Bobbins BOB6





Aluminium

MOTORCYCLE PARTS

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14051

CHAIN ADJUSTER BLOCKS

Smarten up your rear end! Replace rusty stock originals with these shiny new blocks – supplied in pairs.


Aprilia RSV (98-03) Falco, Tuono Pair of Blocks CABPRA10

Aprilia RSV/R (2004+) Pair of Blocks CABPRA20

Honda CBR900RR (00-03) Pair of Blocks CABPRH10

Honda SP1/SP2 Pair of Blocks CABPRH20

Honda CB1300 Pair of Blocks CABPRH30

Honda CBR1000 ‘08+ Pair of Blocks CABPRH50

Kawasaki ZXR400/ZX7/ZX9 Pair of Blocks CABPRLEFTK10

Kawasaki KLX250/Versys 650 Pair of Blocks CABPRLEFTK20

Kawasaki ZX6/ZX7/ZX9/ZX12 Pair of Blocks CABPRK10

Kawasaki ZX10R (2004-2005) Pair of Blocks CABPRK20

Kawasaki ZX10R ‘06+ Pair of Blocks CABPRK40

Kawasaki ZX10R ‘08 Pair of Blocks CABPRK50

Suzuki GSXR600/750/1000/TL1000/GSXR1300 Pair of Blocks CABPRS10

Suzuki 1200 Bandit Pair of Blocks CABPRS20

Yamaha R6 (98-02) / R1(98-03) Pair of Blocks CABPRY10

Yamaha R6 (03+) / R1 Pair of Blocks CABPRY20

Yamaha R1 (04+) / R1 Pair of Blocks CABPRY40

Yamaha XJR1200/1300 Pair of Blocks CABPRY50

Yamaha XJR1300SP Pair of Blocks CABPRY60

CHAIN ADJUSTER BOLTS & NUTSFor use with the Chain Adjuster Blocks above. Smartens up the swingarm and very easy to fi t. Available individually or in sets:

DescriptionTitanium Part Number

Length of bolt

Individual M8 x 45mm Chain Adjuster Bolt TIAXLEADJ845 45mm




Chain Adjuster Bolt & Nut Set - Pair of M8 x 45mm Bolts & Nuts TIAXLE845SET 45mm



Description


Length of bolt

Individual M8 x 45mm Chain Adjuster Bolt LSSAXLEADJ845 45mm

Individual M8 x 55mm Chain Adjuster Bolt LSSAXLEADJ855 55mm

Chain Adjuster Bolt & Nut Set - Pair of M8 x 45mm Bolts & Nuts SSAXLE845SET 45mm

Chain Adjuster Bolt & Nut Set - Pair of M8 x 55mm Bolts & Nuts SSAXLE855SET 55mm



Aluminium


Titanium


Stainless Steel

MO

TO

RC

YC

LE

PA

RT

S


SPROCKET NUTS

Put some colour in your nuts! Manufactured using aerospace grade alloy with rolled threads for extra strength.

Note: Refer to the Pro-Bolt fitting and torque instructions provided. These products are specifically designed and manufactured in Aluminium and therefore we specify a torque setting of 33lbsft/44Nm which is significantly lower than manufacturer’s steel originals.


Set of 6 10mm x 1.25mm pitch - most models SPN10

Set of 6 12mm x 1.25mm pitch - some Honda

and large CC Suzuki

SPN12



Aluminium

MOTORCYCLE PARTS

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14053



M8 x 1.25mm Sprocket Nut - Individual

LSSSPN8 TISPN8

M8 x 1.25mm Sprocket Nut - Set of 6

SS6SPN8 TI6SPN8

M10 x 1.00mm Sprocket Nut - Individual (used on Ducati 1098)

LSSSPN10F TISPN10F

M10 x 1.00mm Sprocket Nut - Set of 6 (used on Ducati 1098)

SS6SPN10F TI6SPN10F


LSSSPN10 TISPN10


LSSSPN10C TISPN10C


SS5SPN10 TI5SPN10


SS6SPN10 TI6SPN10

M10 x 1.50mm Sprocket Nut - Set of 6 (used on some models of Aprilia)

SS6PN10C TI6SPN10C


LSSSPN12 TISPN12


SS5SPN12 TI5SPN12


LSSSPN12C TISPN12C


SS5SPN12C TI5SPN12C

SPROCKET NUTS

Both Stainless Steel and Titanium Sprocket Nuts should be torqued to your manufacturer’s recommended setting.

SPROCKET NUTS BI-HEXItalian inspired design. Titanium 12 point Bi-Hex Sprocket Nuts. Available individually or in sets of 5 and 6.

MO

TO

RC

YC

LE

PA

RT

S


Titanium


Stainless Steel

DescriptionTitanium Part Number

Set of 5 - 10mm x 1.25 pitch Nut TI5SPN10BH

Set of 6 - 10mm x 1.25 pitch Nut TI6SPN10BH

TITANIUM PARTS


AXLE NUTS & SWING ARM NUTS

Replace rusty originals with these light, bright and sexy alternatives. In most cases, our Axle Nuts are manufactured with a captive washer. For fitment intended to a specific model of bike, please refer to our model specific price list or website page. The following table is provided as a list of Threads, Thread Pitches, Socket Sizes and Heights.

Description Thread Pitch Height FlangeDiameter

SocketSize

TitaniumPart Number

StainlessPart Number

Axle Nut Flanged AF22 16mm 1.50mm 16mm 32mm 22mm TINUT16150001

Axle Nut Flanged AF27 18mm 1.50mm 14mm 31mm 27mm TINUT18150001 LSSNUT18150001


Axle Nut Flanged Castellated AF27mm 18mm 1.50mm 17.8mm 31mm 27mm TINUT18150003 LSSNUT18150003

Axle Nut Flanged Castellated AF24 18mm 1.50mm 17.8mm 31mm 24mm TINUT18150005

Axle Nut Flanged AF26 20mm 1.50mm 11.2mm 30mm 26mm TINUT20150001

Axle Nut Flanged AF27 20mm 1.50mm 15.2mm 35mm 27mm TINUT20150002

Axle Nut Flanged AF27mm 20mm 1.50mm 15.8mm 32mm 27mm TINUT20150003


Axle Nut Flanged Castellated AF32mm 24mm 1.50mm 24mm 38mm 32mm TINUT24150001 LSSNUT24150001


Axle Nut Flanged AF28 M25 (748/916/996) 25mm 1.25mm 33.3mm 33mm 28mm TINUT25125001

Axle Nut Flanged AF30 (Ducati Monster 1000 Sie) 25mm 1.25mm 10mm 37mm 30mm TINUT25125002


Axle Nut Flanged Plastic Nyloc AF32 25mm 1.50mm 13mm 37.7mm 32mm TINUT25150002


Axle Nut Flanged Castellated AF32 25mm 1.50mm 21mm 38mm 32mm TINUT25150004


Yamaha Swingarm Captive Nut (R1 ‘07-’08 Right Side) 32mm 1.00mm 11mm 45mm 34mm TINUT32100001

Axle Nut Flanged AF41 (Ducati 748/916/996) 33mm 1.25mm 14.5mm 49mm 41mm TINUT33125002

Axle Nut Flanged Castellated AF46 (748/916/996) 38mm 1.50mm 28mm 63mm 46mm TINUT38150001

Axle Nut Flanged Bi-hex with Cone (Ducati 1098 AF61) 48mm 1.50mm 35mm 74mm 61mm TINUT48150001

Axle Nut Flanged Bi-hex AF61 (MV Agusta) 48mm 1.50mm 35mm 75mm 61mm TINUT48150002


Titanium


Stainless Steel

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14055

AXLE BOLTS & SLEEVES

Axle Bolts bear the brunt of the elements and salt water, therefore they corrode quickly. Replace them with Stainless Steel or our Titanium version.


TitaniumPart Number

Front Wheel Axle Bolt – M14 x 1.50mm – 22mm Socket SizeFits many Honda Models

LSSSPH001 TISPHO01

Front Wheel Axle Bolt – M18 x 1.50mm – 22mm Socket SizeFits Many Honda Models

N/A TISPHO03

Multi Fit SPECIALS


TitaniumPart Number

Front Wheel Axle Bolt / Swingarm BoltFits Triumph Daytona/Speed Triple

N/A TISPTRI01

Triumph SPECIALS


TitaniumPart Number

Front Wheel Axle Sleeve Fits Kawasaki ZXR636/ZX10R ‘06+

N/A TISPKAW11

Kawasaki SPECIALS

MO

TO

RC

YC

LE

PA

RT

S


Titanium


Stainless Steel


DISC ROTOR BOLTS

Aprilia/Ducati Allen Key

M8

Titanium - TIDISCDUC10Stainless Steel - LSSDISCDUC10

Ducati

M8

Titanium - TIDISCDUC20Stainless Steel - N/A

M6

Honda FrontTitanium - TIDISCHONFRStainless Steel - LSSDISCHONFR

24

M8

Honda RearTitanium - TIDISCHONREStainless Steel - LSSDISCHONRE

BMW

Titanium - TIDISCBMW002Stainless Steel - LSSDISCBMW002

BMW

Titanium - TIDISCBMW001Stainless Steel - LSSDISCBMW001

28

M8

Note: Below are common bolts used by aftermarket wheel manufacturers. However, fitment may vary, so please

use these profiles to compare with your originals and verify.

Ducati Titanium - TIDISCDUC40Stainless Steel - LSSDISCDUC40

20

M8

Ducati Titanium - TIDISCDUC50Stainless Steel - LSSDISCDUC50

13

M8

BMW

Titanium - TIDISCBMWStainless Steel - LSSDISCBMW

M8

25

Titanium - TIDISCPVMStainless Steel - N/A

Aftermarket PVM

15

M8

Aftermarket Braking

20

M8

Titanium - TIDISCBRAKE10Stainless Steel - N/A

Aftermarket BrakingTitanium - TIDISCBRAKE20Stainless Steel - N/A

M8

Aftermarket Galespeed Front

M6

Titanium - TIDISCGALE10Stainless Steel - N/A

Aftermarket Galespeed Rear

M6

Titanium - TIDISCGALE20Stainless Steel - N/A

M8

20

MOTORCYCLE PARTS

Ducati

Titanium - TIDISCDUC30Stainless Steel - LSSDISCDUC30

M6

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14057

M6

M8

M8

M8

M8

20

M8

M8 M8

Triumph

Kawasaki

Suzuki

Suzuki Suzuki

Kawasaki

Triumph

Yamaha Yamaha Yamaha

22

M8

M8

Kawasaki

M8

Titanium - TIDISCKAWStainless Steel - LSSDISCKAW

Titanium - TIDISCKAW20Stainless Steel - N/A

Titanium - TIDISCKAW30Stainless Steel - N/A

Titanium - TIDISCSUZStainless Steel - LSSDISCSUZ

Titanium - TIDISCGSXRStainless Steel - LSSDISCGSXR

Titanium - TIDISCSUZ20Stainless Steel - LSSDISCSUZ20

Titanium - TIDISCTRIFRStainless Steel - LSSDISCTRIFR

Titanium - TIDISCTRIREStainless Steel - LSSDISCTRIRE

Titanium - TIDISCYAMStainless Steel - LSSDISCYAM

Titanium - TIDISCR1R6Stainless Steel - LSSDISCR1R6

Titanium - TIDISCYAM20Stainless Steel - LSSDISCYAM20

Many of these bolts are suitable replacements for Footrest Hanger Bolts and Subframe Bolts.

Suzuki Titanium - TIDISCSUZ10Stainless Steel - LSSDISCSUZ10

20

M6

MO

TO

RC

YC

LE

PA

RT

S


Titanium


Stainless Steel


CALIPER PARTS

For those who value real attention to detail! M7, M8 and M10 and special M8 for Ducati.

Bleed Nipples

Manufacturer Front Rear Clutch

Honda M8 x 1.25mm M8 x 1.25mm M8 x 1.25mm

Kawasaki M7 x 1.00mm M7 x 1.00mm M8 x 1.25mm

Suzuki M7 x 1.00mm M7 x 1.00mm M8 x 1.25mm

Yamaha M8 x 1.25mm M8 x 1.25mm M8 x 1.25mm

Ducati M8 x 1.25mm M8 x 1.25mm M8 x 1.25mm

Triumph - Late M8 x 1.25mm M8 x 1.25mm M8 x 1.25mm

BMW Pre 1996 M10 x 1.00mm M10 x 1.00mm

BMW 1996+ M10 x 1.00mm

BMW K Models M10 x 1.00mm M10 x 1.00mm

Pad Pin Grub Screw. Manufactured with a 5mm allen key drive.

Grub Screws



TIPINGRUB LSSPINGRUB



M7 x 1.00mm LSSBN7 TIBN7

M7 x 1.00mm (Shallow) LSSBN7KAW TIBN7KAW


M8 Special Ducati x 1.25mm N/A TIBN8-DUCATI



Titanium


Stainless Steel

MOTORCYCLE PARTS

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14059

Banjo Bolts

MO

TO

RC

YC

LE

PA

RT

S


Titanium


Stainless Steel

Available in Hex Head, Double and Single Sizes. We also now offer a pre-drilled ‘Race Spec’ version designed for Racers for ease of lockwiring.

We also offer an Allen Key version in 1.25mm pitch. Banjo bolts are supplied with copper washers.

Note: Banjo bolts should be fitted ‘dry’ without any lubricant.



HEX HEADSingle Banjo M10 x 1.25mm LSSBANJOS10 TIBANJOS10

Single Banjo M10 x 1.25mm Race Spec LSSBANJOS10R TIBANJOS10R

Single Banjo M10 x 1.00mm LSSBANJOS10F TIBANJOS10F

Single Banjo M10 x 1.00mm Race Spec LSSBANJOS10FR TIBANJOS10FR

Single Banjo M10 x 1.00mm (with integral bleed nipple) LSSBANJOS10FBN TIBANJOS10FBN

Double Banjo M10 x 1.25mm LSSBANJOD10 TIBANJOD10

Double Banjo M10 x 1.25mm Race Spec LSSBANJOD10R TIBANJOD10R

Double Banjo M10 x 1.00mm LSSBANJOD10F TIBANJOD10F

Double Banjo M10 x 1.00mm Race Spec LSSBANJOD10FR TIBANJOD10FR

ALLEN KEY DRIVESingle Banjo M10 x 1.25mm LSSBANJOS20 TIBANJOS20


CALIPER PAD RETAINING PINS

Titanium - TIPINBP007Stainless Steel - N/A

TokicoTitanium - TIPINBP006Stainless Steel - N/A

Nissin

Titanium - TIPINBP005RStainless Steel - SSPINBP005R

NissinTitanium - TIPINBP004RStainless Steel - SSPINBP004R

Tokico

Titanium - TIPINBP003RStainless Steel - LSSPINBP003R

Nissin

MOTORCYCLE PARTS


Nissin

Titanium - TIPINBP002RStainless - SSPINBP002R

Nissin

Internal fitment of Pad Pins are replicas of originals. Our most popular Pins are supplied with an external Hex Head, which has been drilled to allow for lockwire.

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14061


Sumitomo


TokicoTitanium - TIPINBP011RStainless LSSPINBP011R

Tokico


Brembo


Suzuki Own Make

MO

TO

RC

YC

LE

PA

RT

S


Titanium

AVAILABLE IN POLISHED STAINLESS

Stainless Steel


Nissin


Suzuki Own Make


Kawasaki

Titanium - TIPINBP003RStainless Steel - LSSPINBP003R

Nissin


CALIPER UPGRADES

Look after the most important part of your bike! These kits are an excellent overhaul for your bike’s calipers – it makes sense to change all caliper components when taking the time to bleed the system.

Kit contains: Banjo Bolts, Bleed Nipples, Caliper Pins.

Caliper Refurbishment Kits

Part Number Set of 4 Bolts - Length of Bolt measured from under the head Kit Weight

TIFBRADIALRS55 Set of 4 Race Spec M10 x 55mm x 1.25mm 79gms






Race-Spec Radial Caliper Mount Bolt Kits

For standard or upgraded radial calipers – we've now made it easier to order! All our Radial Caliper Kits are metric 10mm x 1.25mm fine pitch with pre-drilled heads for ease of lock-wiring. Kits are available to order by length of required bolt – measurements are taken from below the head.

Part Number Caliper Fits model of bike

TIKITD1000 Brembo Factory, RSV, Tuono

TIKITD1001 Brembo 748, 848, 916, 996, 998

TIKITD1003 Brembo Brembo Aftermarket Racing, Mono Bloc, Radial Mount Calipers,

108 Centre to Centre Mounting Holes

TIKITD2000 Tokico CBR600RR ‘05-’10, CBR1000RR 06-’10

TIKITD2001 Tokico GSXR600 K4-K10, GSXR750 ‘04-’10, GSXR1000 ‘03-’08,

636 B1/B2 03-’04, ZX10R C1/C2 ‘04-05, 636 C1/C2 05-’06

TIKITD2002 Tokico ZX10R ‘08-'10

TIKITD2003 Tokico ZX6R ‘00-’02, ZX12R A1-A2 ‘00-’01

TIKITD2004 Tokico ZX10R ‘06-’07

TIKITD2005 Tokico ZX12 B1/B2 ‘02-’0

TIKITD2006 Tokico GSXR600 K1-K3, GSXR750 Y - K3, GSXR750 K6/K7

TIKITD2007 Tokico SV1000/S ‘03-’04, SV1000/S ‘05+, GSXR1000 K1/K2

TIKITD3000 Sumitomo R6 99+, R1 ‘98+

TIKITD4000 Nissin CBF600F ‘99-’05, CBR900RR ‘98-’03, SP1/SP2,

CBR1100XX Blackbird

TIKITD4001 Nissin CBR900R ‘92-’97, CB900 Hornet ‘01-’05

TIKITD4002 Nissin VTR1000 Firestorm ‘97-’01

TIKITD5000 AP AP Racing, Mono Bloc, Radial Mount Calipers,

108 Centre to Centre Mounting Holes

TIKITD6000 Suzuki GSF600 Bandit ‘00-’04, SV650 ‘03-’04, SV650S ‘03-’04


Titanium

MOTORCYCLE PARTS

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14063

UNSPRUNG OVERHAUL BOLT KITS

A selection of our most popular un-sprung bolts are presented here in boxes. Bolts included are either Flanged Hex Head or Tapered Socket Cap - the bolt heads replicate the bike’s originals. Kits are available in Stainless Steel and Titanium. Titanium Race Spec is also available for many models. In our Race Spec Kits, we upgrade any Flanged Hex Head Bolts in the Front Axle Pinch and Caliper Mount Bolts to our Pre-drilled Race Spec Style.

Included are:• Front & Rear Disc Bolts • Sprocket Nuts • Front Axle Pinch Bolts • Front Caliper Mount Bolts • Front Caliper Pinch Bolts (where applicable)

Stainless Steel Titanium RaceSpec Fits

SSKITCAP120 TIKITCAP120 TIKITCAP120R Aprilia Factory 04-‘05SSKITCAP130 TIKITCAP130 Aprilia RSVR Factory ’06-‘08SSKITCAP150 TIKITCAP150 Aprilia RSV4 Factory ‘09SSKITCBMW047 TIKITCBMW047 BMW S1000RR ‘10+SSKITCDU032 TIKITCDUC32 TIKITCDU032R Ducati 748/916/996/998 (‘99+ Models)SSKITCDU032-1 TIKITCDUC32-1 TIKITCDU032R-1 Ducati 748/916/996/998 (Pre 99 Models)SSKITCDU150 TIKITCDUC150 TIKITCDU150R Ducati 999SSKITCDU045 TIKITCDU045 Ducati 848SSKITCDU250 TIKITCDU250 TIKITCDU250R Ducati 1098 / 1198SSKITCHO098 TIKITCHO098 TIKITCHO098R Honda CBR600RR ’05-‘06SSKITCHO099 TIKITCHO099 TIKITCHO099R Honda CBR600RR ‘07-‘10SSKITCHO212 TIKITCHO212 TIKITCHO212R Honda CBR1000RR ‘04-‘05SSKITCHO213 TIKITCHO213 TIKITCHO213R Honda CBR1000RR ‘06-‘07SSKITCHO214 TIKITCHO214 TIKITCHO214R Honda CBR1000RR ’08-‘10SSKITCHO207 TIKITCHO207 TIKITCHO207R Honda CB1000R ’08+SSKITCHO217 TIKITCHO217 TIKITCHO217R Honda VTR1000 SP1 / SP2SSKITCKA196 TIKITCKA196 TIKITCKA196R Kawasaki 636 ‘05-‘06SSKITCKA190 TIKITCKA190 TIKITCKA190R Kawasaki ZX6R ’07-‘08SSKITCKA175 TIKITCKA175 Kawasaki ZX6 Ninja ’09-‘10SSKITCKA286 TIKITCKA286 TIKITCKA286R Kawasaki ZX10 ‘06-‘07SSKITCKA287 TIKITCKA287 TIKITCKA287R Kawasaki ZX10 ’08-‘10SSKITCSU077 TIKITCSU077 TIKITCSU077R Suzuki GSR600 2006SSKITCSU095 TIKITCSU095 TIKITCSU095R Suzuki GSXR600 K1-K3SSKITCSU094 TIKITCSU094 TIKITCSU094R Suzuki GSXR600 K4-K5SSKITCSU093 TIKITCSU093 TIKITCSU093R Suzuki GSXR600 K6-K7SSKITCSU148 TIKITCSU148 TIKITCSU148R Suzuki GSXR750 Y-K3SSKITCSU149 TIKITCSU149 TIKITCSU149R Suzuki GSXR750 K4-K5SSKITCSU152 TIKITCSU152 TIKITCSU152R Suzuki GSXR750 K6-K7SSKITCSU093 TIKITCSU093 TIKITCSU093R Suzuki GSXR750 K8-K9SSKITCSU173 TIKITCSU173 TIKITCSU173R Suzuki GSXR1000 K1-K2SSKITCSU174 TIKITCSU174 TIKITCSU174R Suzuki GSXR1000 K3-K4SSKITCSU165 TIKITCSU165 TIKITCSU165R Suzuki GSXR1000 K5-K6SSKITCSU166 TIKITCSU166 TIKITCSU166R Suzuki GSXR1000 K4-K8SSKITCSU163 TIKITCSU163 TIKITCSU163R Suzuki GSXR1000 K9-K10SSKITCSU200 TIKITCSU200 TIKITCSU200R Suzuki GSXR1300 Hayabusa ’99-‘07SSKITCSU205 TIKITCSU205 TIKITCSU205R Suzuki GSXR1300 Hayabusa ’08-‘10SSKITCSU210 TIKITCSU210 TIKITCSU210R Suzuki GSX1300 B-King ‘07+SSKITCSU250 TIKITCSU250 Suzuki GSX1400 ’01-‘07SSKITCTR088 TIKITCTR088 TIKITCTR088R Triumph Daytona 675 ’06-‘08SSKITCYA282 TIKITCYA282 TIKITCYA282R Yamaha R6 ’03-‘04SSKITCYA282-1 TIKITCYA282-1 TIKITCYA282-1R Yamaha R6 ‘05SSKITCYA283 TIKITCYA283 TIKITCYA283R Yamaha R6 ’06-‘10SSKITCYA398 TIKITCYA398 TIKITCYA398R Yamaha R1 ’02-‘03SSKITCYA399 TIKITCYA399 TIKITCYA399R Yamaha R1 ’04-‘06SSKITCYA405 TIKITCYA405 TIKITCYA405R Yamaha R1 ’07-‘08SSKITCYA406 TIKITCYA406 TIKITCYA406R Yamaha R1 Big Bang ’09-‘10SSKITCYA192 TIKITCYA192 TIKITCYA192R Yamaha FZS1000 Fazer ’01-‘05SSKITCYA193 TIKITCYA193 Yamaha FZS1000 Fazer ’06-‘10

MO

TO

RC

YC

LE

PA

RT

S


Titanium


Stainless Steel


POPULAR KITS

Front & Rear Caliper Mount Kit

Front & Rear Caliper Pinch Bolt Kit

Supplied in kit form with Copper Grease, these replace the bolts that mount the caliper to the fork legs.

We use either Flanged Hex Head or Tapered Socket Cap Bolts as appropriate when replacing the originals.

Where fitment allows, we also offer a 'Race-Spec' version, where the heads are drilled for ease of lockwiring.

These are the bolts that go through the caliper itself, pinching the caliper together. We also offer the special 'low head profile' Brembo Caliper Pinch Bolts in both Titanium and Stainless Steel.

MOTORCYCLE PARTS

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14065

Supplied in kit form with Copper Grease – these replace the bolts at the bottom of the forks.

Upgrade further to our amazingly low weight Race-Spec bolts. Pre-drilled across the fl ats, reduced socket size and scooped-out head for maximum weight saving with no compromise in strength and safety. These bolts are widely used by top race teams. The most common size bolt – M8 x 40mm – weighs just 9.5gms in Titanium, compared to 18.5gms of the average steel original.

Fork/Axle Bottom Pinch Bolts

Our most popular kit, four M8 x 40mm Race-Spec bolts, weigh in at just 40gms.

MO

TO

RC

YC

LE

PA

RT

S


Titanium


Stainless Steel


Brake & Clutch Perch Pinch Bolt Kits

The bolts that pinch together the Brake and Clutch Perches on the handlebars.

Handle Bar Bolt Kits

These bolts pinch the handlebar to the yoke or forks for both retro and clip-on style.

MOTORCYCLE PARTS

NEW

RACE-SPEC

ALUMINIUM


Titanium

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14067

Supplied in kit form with Copper Grease – these are the fork-to-yoke clamp bolts.

Top & Bottom Triple Clamp Bolt Kits

The bolts that mount the footrest hangers. We off er sets for both front & rear.

Rider & Pillion Footrest Hanger Bolt Kits


Stainless Steel

MO

TO

RC

YC

LE

PA

RT

S


Scratch & Spark Set


TISPARK6 Pair of 6mm Allen Key Drive Bolts with colour anodised collar

TISPARK8 Pair of 8mm Allen Key Drive Bolts With colour anodised collar

For those who like to get down, you’ll get some serious sparks from these! Titanium bolts, with your colour choice of alloy collar. We offer 6mm & 8mm Bolts in 20mm lengths. Other lengths can be supplied on request.

Subframe Bolt Kit

These are the bolts that hold the main sub-frame on. Where necessary supplied with Washers and Nyloc Nuts.

MOTORCYCLE PARTS


Titanium

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14069

Aprilia


A TISPAP12 Titanium RSVR 2002-2003 Front Caliper Mount Bolt

- M10 x 1.25 x 28mm

B TISPAP14 Titanium RSVR/Other Rear Brake Pivot Bolt

SPECIAL PARTS

Also see our Axle Nuts, Disc Bolts & Caliper Pins.

BMW

SP

EC

IAL

PA

RT

S


Stainless Steel

B

A

B

A

D

C


A LSSSPBMW03 Individual Frame Adjusting Nut – F800 series, 800S, 800ST

A SSSPBMW03-4 Set of 4 Frame Adjusting Nuts – F800 series, 800S, 800ST

B SSSPBMW04-8 Set of 8 Cylinder Head Rocker Head Cover Bolts & Washers – Boxer Engines

C SSSPBMW06-4 Set of 4 Cylinder Head Rocker Head Cover Bolts & Washers – Boxer Engines

D LSSSPBMW05 Wheel Bolt for Cast Wheels – M10 x 1.25mm x 40mm

D SSSPBMW05-5 Set of 5 Wheel Bolts for Cast Wheels – M10 x 1.25mm x 40mm

The following parts are available in polished Stainless Steel


Ducati

Titanium


A TISPDUC01 748/916/996/998 - Front Caliper Pinch Bolt

B TISPDUC01-8 748/916/996/998 - Front Caliper Pinch Bolts - Set of 8

C TISPDUC03 748/916/996/998 - Rear Hub Pinch Bolt

D TISPDUC14 749/916/996/998 Side Stand Pivot Bolt

E TISPDUC40 1098 Rear Hub Pinch Bolt - M12 x 40mm

F TISPDUC37 1098 Swingarm Pivot Shaft & Nut

G TISPDUC23 Monster Footrest Hanger Bolt M10 x 47mm

H TISPDUC26 Monster Footrest Hanger Bolt M10 x 58mm

I TISPDUC24 Monster Footrest Hanger M10 x 37mm

J TISPDUCAXLESET Full set of Axle Nuts

Stainless Steel

Part Number Description Fits Models

LSSSPDUC01 Front Caliper Pinch Bolt M8 x 40mm - low head profile

748/916/996/998

AluminiumPart Number Description Fits Models

DUCAXLESET Full set of 3 Axle Nuts 748/916/996/998

LDUCNUT40 Front Spindle Collar 848/1098

SPECIAL PARTS

Al l Mater ia ls

ALUMINIUM: BLACK • BLUE • GOLD • GUNMETAL GREY


STAINLESS STEEL: ALL AVAILABLE IN POLISHED STAINLESS

TITANIUM: BLUE • GOLD • NATURAL • PURPLE HAZE

I

G

E

H

A

DF

C

B

J


Titanium

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14071

Honda


A TISPHO95 CBR1000RR ‘04-’07 Swingarm Pivot Inner Nut Right Side

B TISPHO82 CBR1000RR ‘04-’07 Rear Subframe Dome Head Bolt

M8 x 16mm

C TISPHO73 CBR1000RR/VTR1000 ‘04-’07 Swingarm Lock Nut

Left Side 36mm

D TISPHO74 CBR600F4/RR ‘99-’06 Airbox Bolt

E TISPHO40 CBR600RR 03-04 Subframe Dome Head Bolt M10 x

1.25mm x 40mm

F TISPHO71 CBR600RR ‘03-’06/VFR800 ‘02-’07 Swingarm Pivot Nut

Right Side

G TISPHO38 CBR600RR/1000RR ‘03’-’05 Rear Sprocket Stud

H TISPHO38-6 CBR600RR/1000RR ‘03’-’05 Rear Sprocket Studs - Set of 6

I TISPHO19 NC30/NC35 - Rear Sprocket Stud - Each

SP

EC

IAL

PA

RT

S

F

D

G

A

C

E

B

H

I


Kawasaki


A TISPKAW01 Various - Footrest Hanger Bolt M8 x 30mm

B TIDISCYAM20 Various - Footrest Hanger Bolt M8 x 20mm

C TISPKAW05 Various -Footrest Hanger Bolt M10 x 30mm


A TISPMV01 Front Axle Pinch Bolt - M10 x 32mm

B TISPMV06-2 Pair of Rear Hub Pinch Bolts M12 x 50mm set of 2

C TISPMV08 Side Stand Spring Bar

D TISPMV15 Front Caliper Pinch Bolt - M8 x 44mm

E TISPMV17 Frame Bolt with Shoulder - each

MV Agusta F4

A

C

D

A

C

E

B

SPECIAL PARTS

B


Titanium

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14073

Suzuki

SP

EC

IAL

PA

RT

S

YamahaPart Number Description

A TISPYAM12 R6 1999-2002 Rear Brake

Caliper Slide Bolt

B TISPYAM14 R6 2003-2007/R12004-2008

Rear Caliper Slide Bolt

C TISPYAM21 R6 2005-2006/ R1 2004-2008

Front Brake Lever Pivot Bolt

D TISPYAM19 R1 2002-2003 Rear Caliper

Slide Bolt

E TISPYAM02 R1 Front Mudguard Bolt

M6 x 20mm

16mm Head Diameter

5mm Head Height

D

A

C

E

B

D

A

C

E

B


A TISPSU08 GSXR Cam Cover Pinch/Retaining Bolt

B TISPSU24 Bandit 600/1200 Rear Torque Arm Bolt

C TISPSU42 Suzuki M16 x 1.50mm Oil Bung

D TISPSU46 GSXR600/750/1000 K6/K7 Rear Brake Caliper

Slide Bolt - each

E TISPSU52 GSXR Right Side Swing Arm Pivot Nut

Plastic Tubing/Spacers/CollarsPart Number Description

TUB5 M5 Spacer/Tubing

TUB6 M6 Spacer/Tubing

ANCILLARY ITEMS

sales uk 0044 (0) 1684 851940 www.pro-bolt .com74

Copper WashersPart Number Description

LWCOP10 M10 x 13.5mm O/d

Plastic WashersPart Number Description

LWAN4 M4 Fairing Plastic Washer




LWACR6 M6 Countersunk Rubber Washer

LWACR8 M8 Countersunk Rubber Washer

LWASITEM Washer for Suzuki Cam Cover Bolt

Aluminium Threaded Collars/Spacers


LCOLLAR5-7-3 5mm Threaded Collar - 7.5mm o/d - 3mm in Length



LCOLLAR6-8-3 6mm Threaded Collar - 8mm o/d - 3mm in Length



LCOLLAR6-10-6 6mm Threaded Collar -10.5mm o/d - 6mm in Length

LCOLLAR8-10-5 8mm Threaded Collar -10mm o/d - 5mm in Length

Steel WashersPart Number Description

LWASQR Steel 'Grippa' Washers for M6 Quick Release Studs

Allen KeysPart Number DescriptionAK1.5 1.5mm Allen KeyAK2 2mm Allen KeyAK2.5 2.5mm Allen keyAK3 3mm Allen KeyAK4 4mm Allen KeyAK5 5mm Allen KeyAK6 6mm Allen Key

Rubber Well NutsPart Number DescriptionLRNUT4F M4 (0.5mm - Fine Pitch) Ducati Rubber Nut LRN5 M5 Rubber Nut - 13mm LengthLRN6 M6 Rubber Nut - 15mm LengthLRN6-25 M6 Rubber Nut - 25mm LengthLRN8 M8 Rubber Nut - 28mm Length

Backing Plates & Receptacles


CLIP2 M5 Chimney Nut / Slip On - 14mm width

CLIP5 M5 Chimney Nut / Slip On - 12mm width

CLIP1 M6 Chimney Nut / Slip On

CLIP4 M8 Chimney Nut / Slip On

CLIP6 Receptacle for Quick Release- Rivet On

CLIP3 Receptacle for Quick Release- Slide On

CLIP7 M5 Chimney Nut / Weld On

CLIP8 M6 Chimney Nut / Weld On

CLIP9 Race Fairing S Clip

CLIP-20 Race Fairing S Clip - Pack of 20

LWARQR Plastic Washer for Quick Release Stud

LWASQR Steel Grippa Washer for M6 Quick Release Stud

LRIVET3.2-6 Blind rivet 3.2mm diameter x 6mm length

Lockwire Part Number DescriptionLOCKWIRE 51 0.5mm DiameterLOCKWIRE 62 0.61mm Diameter

Supplied in 1 metre Lengths AN

CIL

LA

RY

ITE

MS

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14075


Won’t chip and peel like chrome! Our unique Flanged Hex Head Bolts are machined with an attractive convex dome to reflect the maximum light on a Hex Head Bolt. They are also designed with a captive washer for maximum effect. Polished to a mirror finish, supplied in any quantity, or packs of 5.

FLANGED HEAD BOLTS

ThreadDiameter

Pitch SocketSize

Max HeadDiameter

Lengths Available

1/4” 20TPI 1/4” 0.390” 5/8”, 3/4”, 7/8”, 1”, 1-3/16”, 1-1/4”, 1-3/8”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”, 2-3/4”, 4”, 4-3/4”

5/16” 18TPI 5/16” 0.490” 3/4”, 1”, 1-1/4”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”

3/8” 16TPI 3/8” 0.618” 3/4”, 1”, 1-1/4”, 1-1/2”, 1-3/4”, 2”, 2-1/2”

SPIKE HEAD BOLTS

New Spike Head design unique to Pro-Bolt! Machined to maximum length allowing for socket fitment and finished with a captive washer. Polished to a mirror finish, supplied in any quantity, or in packs of 5.

ThreadDiameter

Pitch SocketSize

Max HeadDiameter

Lengths Available

1/4” 20TPI 1/4” 0.390” 5/8”, 3/4”, 7/8”, 1”, 1-3/16”, 1-1/4”, 1-3/8”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”, 2-3/4”, 4”, 4-3/4”

5/16” 18TPI 5/16” 0.490” 3/4”, 1”, 1-1/4”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”

3/8” 16TPI 3/8” 0.618” 3/4”, 1”, 1-1/4”, 1-1/2”, 1-3/4”, 2”, 2-1/2”

UNC STAINLESS STEEL

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14077

DOME HEAD BOLTS

Our Dome Head Bolts are ideal for use on Derby/Clutch Cover or any bodywork. The attractive domed heads are manufactured with the smallest possible allen key drive for the most appealing cosmetic appearance. Polished to a mirror finish, supplied in any quantity, or in packs of 5.

ThreadDiameter

Pitch Allen Key Drive

Max HeadDiameter

Lengths Available

5/32” 32TPI 5/32” 5/16” 1/2”, 5/8”

1/4” 20TPI 1/4” 7/16” 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 2-1/2”

COUNTERSUNK BOLTS

Countersunk Bolts are measured in length including the head. We can supply countersunk washers separately which are designed to be used with this type of bolt. Ideal where a large diameter spread is required to prevent bolts pulling through bodywork etc and where a low head profile is essential. Polished to a mirror finish, supplied in any quantity or packs of 5.

ThreadDiameter

Pitch Allen Key Drive

Max HeadDiameter

Lengths Available

1/4” 20TPI 1/4” 1/2” 5/8”

FLAT WASHERS

Precision manufactured Flat Washers, polished to a mirror finish.

Size Outside Diameter Thickness

1/4” 5/8” 1/16”

1/4” 3/8” 1/16”

5/16” 11/16” 1/16”


UNC Stainless Steel

UN

C S

TAIN

LE

SS

ST

EE

L


Replace rusted, damaged and dull bolts with our high grade stainless steel versions. As with all our Stainless Steel, they are polished to a mirror finish so will complement our Engine Casing Bolt range.

IMPERIAL FASTENERS AND KITS SUITABLE FOR HARLEY-DAVIDSON® MODELS

SPECIAL PARTS SUITABLE FOR HARLEY-DAVIDSON® MODELS

100%

POLISHED

STAINLESS STEEL

Engine Covers

Engine Cover Boxed Sets

Transform the look of your bike with our Boxed Sets which enable you to replace lost, corroded or simply dull fasteners and achieve a superior look.

Fitment is easy - remove one bolt at a time, and replace with the identical length bolt from your Pro-Bolt kit, apply the Threadlock provided and torque to your manufacturers recommended setting.

Special Parts suitable for Harley-Davidson® Models

To continue the look, we supply a number of special parts which are generally universal across a wide range of models.

Stock Code Description Thread Diameter Threads Pitch Length Qty Per Pack

LSSDISCHDUNC210 Front Disc Bolt - Button Head 5/16" 18 tpi 7/8" 1

LSSDISCHDUNC312 Rear Disc Bolt - Button Head 3/8" 16 tpi 1" 1

SSHD46646-05 Front Disc Bolts - Set of 5 5/16" 18 tpi 7/8" 1 Pack = 5 Pieces

SSHD46647-05 Rear Disc Bolts - Set of 5 3/8" 16 tpi 1" 1 Pack = 5 Pieces

LSSSPHD02 Head Bolt - Individual Bolt 3/8" UNC Internal Thread 16 tpi 1 7/8" 1

LSSSPHD03 Head Bolt - Individual Bolt 3/8" UNC Internal Thread 16 tpi 3 1/6" 1

SSHDHEADBOLTHead Cover Bolt Kit (4 Long & 4 Short) 83-'06 Twin Cam/Big Twin and -('07-'10 1584) (TC88, TC96 and TC96B)

1 Pack = 8 Pieces

SSHD41843-08 Front Banjo Bolt Set 06 VRSC/'08 Touring 1 Pack = 7 Pieces

We offer bolt kits for specific models - just choose your look from either our unique Spike Head or Flanged Hex Head!

Kits are available for Primary Covers, Transmission Covers, Cam Covers, Lifter Block Covers, Rocker Box Covers and Gearcase/Front Sprocket Covers.

All our fasteners exceed D.O.D, M.O.T and factory standards.

10 20 30 40 50 60 70 80 90 100 110 120 130mm 14079


Stainless Steel

HA

RL

EY

-DA

VID

SO

N M

OD

EL

S®

Imperial Workshop Boxes

For large scale projects or just a convenient source of replacements, we supply workshop boxes comprising of the most widely used fasteners.

Exact contents are available on-line and can be amended if desired - with the agreement of Pro-Bolt.

Stock Code Description Qty

Per Pack

WSBOX155UNCHXSSStainless Steel UNC Workshop Box - Flanged Hex Head Bolts

155

WSBOX155UNCSKSSStainless Steel UNC Workshop Box - Spike Head Bolts

155

WSBOX200UNCMIXSSStainless Steel UNC Workshop Box - Flanged Hex Head and Spike Head Bolts

200

WSCAB500IMPSSStainless Steel UNC Workshop Cabinet - Flanged Hex Head Bolt, Spike Head Bolts and Washers

500


Imperial Workshop Boxes

For large scale projects or just a convenient source of replacements, we supply workshop boxes comprising of the most widely used fasteners.


WORLDWIDE DISTRIBUTORS

EuropeAustria Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Bike Design Belgium 0032 5245 3361 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] J L Motorace Ltd 00357 22752234 [email protected] Republic Bikers Crown 00420 495 484 255 [email protected] Republic Prorace System 00420 608 346650 [email protected] Pro-Bolt Denmark 0045 33228070 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Sportbike Uskola Ltd 00358 41 546 2704 [email protected] Pro-Bolt France See website for details [email protected] Custom Chrome Europe 0049 671 888880 [email protected] Pro-Bolt Germany 0049 21193 85270 [email protected] Team Metisse GMBH 0049 5373 9240 780 [email protected] Moto Shop Grigorios Yiatilis 0030 210 921 4315 [email protected] X - Bikes 0036 1405 6653 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Faster96 srl 0039 0517 26849 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] M A Motorcycle Centre 00356 491790 [email protected] Pro-Bolt Holland See website for details [email protected] Ten Kate Racing Products 0031 529488815 [email protected] Netherlands Zodiac International 0031 297 28 86 21 [email protected] PitStop Motorcyle Import 0047 91126731 [email protected] Bikerman AS 0047 51 53 83 73 [email protected] FN Sykkel (Cycle Parts) 0047 997 13 354 [email protected] Dyno-Tech 0048 608 655 130 [email protected] Sime Promotion (Cycle Parts) 0048 502498640 [email protected] Vincere Piotr Ulicki (Cycle Parts) 0048 500 014 768 [email protected] Probolt-Portugal See website for details [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Totimport 0034 966 850 547 [email protected] Bikersneed Sweden 0046 707 135272 [email protected] Boove Aktiebolag 0046 8 7610266 [email protected] Pro-Bolt Switzerland 0041 793738087 [email protected] Suter Racing Technology 0041 523971060 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected]

North & South America & CanadaAmerica Pro-Bolt USA 1888 251 1644 [email protected] Tucker Rocky Distributing 001 817 258 9241 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Blue Streak Racing 001 519 878 9866 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Rico 2 Ruedas Distributor 001 787 735 4671 [email protected]

AfricaSouth Africa Pro-Bolt South Africa 0027 218 560 448 info@ pro-bolt.co.za

Australia & New ZealandAustralia Pro-Bolt Australia 0061 397925025 [email protected] Caledonia Zone Rouge Sarl 00687 779 177 [email protected] Zealand Prescott Engineering 0064 9 5797424 [email protected]

Middle/Far EastDubai Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Reshef-Tech 00972 8 8672621 [email protected] Pro-Bolt Japan 0081 566 62 8605 [email protected] Pacmax 0081 476 35 2680 [email protected]

South East AsiaIndonesia Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Biketech 21 0065 6392 1230 [email protected]

Thailand MPK Concept 0066 26115679 [email protected]

Pro-Bolt Worldwide

10 20 30 40 50 60 70 80 90 100 110 120 130mm 140

DISPLAY STANDS

PRO-BOLT WORLDWIDEPro-Bolt has global websites based in many countries around the world, offering local sales support and advice using local language and currency.

The list of countries is constantly growing – please see our main website www.pro-bolt.com for details.

We offer a variety of lightweight, pop-up display stands, developed to hold a range of stock options to suit most dealers. We would also be happy to customise a specific display.

For more details please email [email protected].

81

TITANIUM PARTS

sales 0044 (0) 1684 851940 www.pro-bolt .com82Pro-Bolt Ltd, Unit F, 6400 Severn Drive, Tewkesbury Business Park, Tewkesbury, Glos GL20 8SF. UK

Tel: 0044 (0)1684 851940 Fax: 0044 (0) 1684 850080 Email: [email protected] Online: www.pro-bolt.com

Australia www.probolt-australia.com

Denmark www.probolt.dk

France www.probolt-france.com

Germany www.probolt-germany.com

Holland www.probolt-holland.com

Japan www.probolt-japan.com

Portugal www.probolt-portugal.com

South Africa www.probolt.co.za

Switzerland www.pro-bolt.ch

United States www.probolt-usa.com

Visit our main website www.pro-bolt.com for latest information

We have websites in the following countries, where you will fi nd

local languages, local currency and local support:

PRO-BOLT WORLDWIDE2n

d E

dit

ion

Documents

Pro-Bolt 2011 Catalogue