Upload
apri-apriyanto
View
21
Download
1
Tags:
Embed Size (px)
Citation preview
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
1
CONTENTS
ABOUT COMPANY 4
NPO Privod LLC 4
1. TURBOGENERATORS, SYNCHRONOUS, TWO POLE, AIR COOLED 6
1.1. TTK line turbogenerators with capacity 16225 MW 6
1.2. T (TS) -series turbogenerators with 2.563 MW capacities 8
1.3. TK - series turbogenerators with 1.563 MW capacities 10
1.4. GTG - series turbogenerators with 2.58 MW capacities 11
1.5. Special-version turbogenerators 12
2. HYDRO TURBINES GENERATORS 14
3. SMALL CAPACITY GENERATORS 16
3.1. SG and SGD synchronous generators 16
3.2. SG-600-2 NF3 and SGV 600-2 NF3 synchronous generators 17
3.3. Synchronous diesel generators 18
3.4. GS synchronous generators 19
3.5. SGTK synchronous generators 20
4. GENERATOR ExCITATION CONTROL SYSTEMS 21
4.1. Brushless diode excitation systems (SVBD) 21
4.1.1. Synchronous generators excitation control cabinets ShUVGM 21
4.1.2 Rotor protection cabinets ShZR and resistor blocks BR. 23
4.1.3. Control systems for synchronous generators brushless exciters ShUVG 24
4.2. Static generator excitation systems STS(N) 25
5. TURBOGENERATOR LIfE SUPPORT SYSTEMS 26
5.1. Air cleaner and air recirculation unit 26
5.2. Water recirculation devices in air coolers 26
5.3. Oil supply device for turbogenerator bearings 26
6. TWO POLE SYNCHRONOUS MOTORS, HIGH-SPEED 27
6.1. STDM-series motors with 6302,000 kW capacities 27
6.2. STD - series motors with 2,500...12,500 kW capacities 29
6.3.STD motors, special version 31
6.4. STDP-series motors, explosion proof 33
6.5. SDG2 motor to operate gas pressurizers 35
6.6. RVSD Frequency-regulated, explosion proof synchronous motor with 14,000 kW capacity 36
6.7. TDS motors with 20,000 and 31,500 kW capacities 37
7. SALIENT POLE SYNCHRONOUS MOTORS 38
7.1. SDK2- and DSK-series compressor motors 38
7.2. SDKP2-series compressor explosion proof synchronous motors 40
7.3. SDN general purpose motors 41
7.4. Vertical synchronous motors SVD for driving vertical hydraulic pumps 42
7.4.1. Vertical synchronous motors, series SVD 143, SVD 173, and SVD 215 42
7.4.2. Vertical synchronous motors, series SVD 325, SVD 375 43
7.5. Synchronous motors SDE2-15-34-6 44
7.6. Synchronous motors SDEUM-16-28-6 45
25, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
8. ExCITATION SYSTEMS fOR SYNCHRONOUS MOTORS 46
8.1. Excitation control cabinet for brushless exciters of synchronous motors (ShUVD) 46
8.2. TRN 1P thyristor voltage regulator 47
8.3. Static thyristor excitation systems for synchronous motors type STSN 48
8.4. VTE 10-315 and VTE 630/150 T series analog thyristor exciters for synchronous motors 49
9. ASYNCHRONOUS ExPLOSION PROOf MOTORS WITH A SHORT CIRCUITED ROTOR 50
9.1. VAO series motors 50
9.2. V-2500 and V-5000 motors 54
9.3. VASO-series explosion proof vertical motors 55
9.4. VAOV series vertical motors 56
10. ExPLOSION PROOf, THREE PHASE ASYNCHRONOUS MOTORS WITH A
SHORT CIRCUITED ROTOR 57
10.1. DAZO4 - series ventilated motors 57
10.2. DAO - type ventilated motors 59
10.3. AOD - type ventilated two - speed motors 60
10.4. AZO - series closed - ventilation motors 61
10.5. DAB special asynchronous motors 62
10.6. DA4 asynchronous motors 62
10.7. DAZ series enclosed two-pole motors 63
10.8. VASV vertical water-cooled special motors 64
10.9. DASO vertical motors 64
10.10. Special asynchronous motors with variable frequency drive 65
10.10.1. Explosion proof asynchronous squirrel-cage motor DARB 1200 6 NF2 65
10.10.2. Asynchronous squirrel-cage DARG 3500 8 UM4 66
10.10.3. Modernized arc-type stator asynchronous motor DADM 750-150 NF1 66
10.11. Vertical asynchronous motors for driving hydraulic pumps 67
10.11.1. AVDN series vertical asynchronous motors 67
10.11.2. AVDN and AVDZ series vertical asynchronous motors for nuclear power plants and thermal power plants 68
10.11.3. DAVD series vertical two-speed asynchronous motors 69
11. MOTORS fOR OPERATION AT NUCLEAR POWER PLANTS 70
11.1. Motors for driving main circulation pumps of nuclear power plants 70
11.1. Vertical closed asynchronous motor DAVZ-8000-6 AM U5 70
11.2. Asynchronous vertical two-speed motor DAVDZ-7100/2800-10000-6/8 AM U5 71
11.3. Motors for driving pumps and high-speed machines 72
11.3.1. Closed asynchronous motors DAZA 72
12. ELECTRICALLY DRIVEN GAS COMPRESSOR UNITS (EGPU) 73
12.1. EGPU on the basis of electric drives fabricated under license of TMEIC; basic configuration of flow diagram 73
12.2. EGPU on the basis of electric drives from MAN Diesel&Turbo, flow diagram single unit (MOPICO and HOFIM) 75
12.3. Packaged modular EGPUs 79
12.4. Electrically driven 12.5 MW gas compressor units EGPU (non-controlled) 80
12.5. Electrically driven 12.5 MW gas compressor units EGPU (controlled) 82
12.6. Set of equipment for reconstructing electrically driven gas compressor unit of 12.5 MW 83
12.7. High-speed variable-frequency electric drives EPRV 84
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
3
13. TRANSfORMING EQUIPMENT 85
13.1. High voltage frequency converters HV-VFD 85
13.2. High voltage soft starters SSM-HV 86
14. TRACTION ELECTRICAL EQUIPMENT 87
14.1. Traction generators for main-line freight gas turbine locomotives 87
14.1.1. Traction machine ATG-7370/600-6000 N2 87
14.1.2. Synchronous traction generators for main-line freight gas turbine locomotive GT1h 88
14.2. GST traction alternators 89
14.3. GPT 840-750N2 direct current generator 90
14.3. ASTM 2800/600-1000 N2 synchronous traction unit 91
14.4. ASTG 2800/400-1000 N2 and ASTG2 2800/400-1000 N2 synchronous traction units 92
14.5. VST exciters 93
14.6. EDU-133 traction motors 94
14.7. EDU-136 traction motors 95
14.8. DAT asynchronous traction motors 96
14.9. 4PNJ-200MA direct current motors 97
14.10. DTK-800M N1 Direct-current traction motor 98
14.11. DTK-810M NF1 direct-current traction motor 99
14.12. DPT direct current motors 100
14.13. 5SG, 6SG, 7SG starter-generators 101
14.14. DAVT-280-15-4/6/12 N2 (N5) asynchronous traction motor 102
14.15. DATE-170 N2 and DAT-170 N2 asynchronous traction motors 103
14.16. AMVR-37 asynchronous motor for motor-fan 104
14.17. Kicking coils 105
14.17.1. DSF-1L N2 power line filter kicking coil for subway cars 105
14.17.2. DS-2 smoothing kicking coil 105
14.18. Set of electric equipment and automation for locomotives 106
14.18.1. PK-1000L - series electropneumatic contactors 106
14.18.2. PPK-8000L-series electropneumatic switches 107
14.19. DPT-196M N2 traction motor 108
14.20. Privod-TRL1 set of traction electric equipment for trolleybuses with reostatic-contactor control systems 108
14.21. DPT-110 N2 traction motor for trolleybus 109
15. GOST CONVENTIONS 110
15.1. Embodiment (in compliance with GOST 2479) 110
15.2. Cooling method (in compliance with GOST 20459) 110
15.3. Protection level (in compliance with GOST 14254) 110
15.4. Climatic versions (in compliance with GOST 15150) 111
15.5. Categories of location (in compliance with GOST 15150) 111
15.6. Rated operation mode (in compliance with GOST 52776) 111
15.7. Explosion protection types and levels (in compliance with GOST R MEK 60079-0) 111
45, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
NPO Privod LLC occupies leading positions in design, manufacturing and supplies of electrical generating equipment of low and medium power, traction equipment for railway transport.The list of the products supplied by NPO Privod LLC includes over 1,500 positions of electric machines and controlling equipment - gas turbine generators, hydro turbines generators, synchronous and asynchronous motors, electric traction equipment, etc.
ProductsTurbogenerators
Power Output range 1.5 - 225 MW for electrical energy generation based on the steam and gas turbines applications. The Turbogenerators have enhanced efficiency and advanced technical design.
Hydro turbines generators
Power Output range up to 300 MW for electrical energy generation based on the hydraulic turbines applications.
Hydr turbines of wide power output range, with both vertical and horizontal design and are manufactured according to GOST and customers specific technical requirements.
Synchronous motors
Capacity range 0.315 31.5 MW for pump drives, compressor drives, gas blowers, air blowers and other high-speed equipment applications; specialized compressor motors with a range of 0.315 - 1 MW.
Asynchronous motors
Capacity range 6.5 kW 12.5 MW, rotation speed - 115 - 8,600 rpm for pump drives, ventilators, smoke exhausters, air blowers, air cooling machines, and other applications; for nuclear plants.
Horizontal and vertical motors are produced for various climate conditions, with explosion protection.
Electrical gas-pumping units (EGPU) and sets of materiel equipment for EGPU revamp
Capacity range 4.0 8.2 MW rotation speed 8,000 8,600 rpm. for natural gas compression and transportation through main gas pipelines.
High-speed, gearless, and frequency-regulated gas-pumping units with the rotors on magnetic bearings.
The electric energy consumed by our gas-pumping units is lower by about 30% compare to the equipment provided by other manufacturers. The customers capital costs and installation costs are also reduced. The gas pumps can operate in a wide range of ambient conditions from -60 to +45 C.
Traction electrical equipment
for main-line (cargo and passenger) diesel locomotives; traction motors for subway cars.
New products
The unique experience in the new equipment designing enables NPO Privod LLC to develop high-tech products. The team of designers has a wealth of experience in the designing of new machines, including the development of new projects, customization, diagnostics, and consultancy on operation and maintenance of the output products.
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
5
Certification of management system and products
The integrated management system, based on the principles established by three international standards, is introduced on the production site (Electrotyazhmash- Privod LLC): - Quality management system as per ISO 9001:2008; - Environmental management system as per ISO 14001:2004; - Occupational health and safety management system as per OHSAS 18001:2007. As for the production of electrical equipment for the railroad stock, the quality management system has a certificate of conformity to the requirements of GOST R ISO 9001:2008. The products of the Company, for which the Russian legislation provides for obligatory certification, have certificates of conformity. We are licensed to produce equipment for the nuclear power industry and have a certificate of conformity to the operation conditions at Gazprom JSC facilities. NPO Privod LLC cooperates with independent expert organizations: Bureau Veritas General Conditions and FSUE VO Safety. All our equipment can be certified upon customers request.
Products Deliveries
The products are in strong demand both in Russia, and abroad. The equipment supplied by NPO Privod LLC is used at power facilities in Africa, Asia, Middle East, and Latin American countries. Total capacity of the equipment, that works in 35 countries worldwide exceeds 50,000 MW.The permanent customers of the Company include leaders of the oil, gas and power industries, transport machinery companies, metallurgical engineering companies and other large facilities.
5, Moldavskaya Str., Moscow, 121467, Russia+7 (495) [email protected]
65, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
1. TURBOGENERATORS, SYNCHRONOUS, TWO POLE, AIR COOLED
1.1. TTK line turbogenerators with capacity 16225 MW
TTK tubular body turbogenerators provide electric energy output in connection with steam (P) or gas (G) turbines.
Cooling system closed cycle air cooling with two sectioned air coolers or open cycle cooling system
Cooling method closed cycle ventilation ICW37A81
open cycle ventilation IC31
Excitation system static or brushless system
Protection level closed cycle ventilation IP54
open cycle ventilation IP21 or IP54
Temperature classification: isolation / application
class F/class
Rated operating conditions S1
Supplied in compliance with GOST 533 and individual customer's requirements.
TTK Turbogenerators construction is patented.
Delivery set includes: turbogenerator, excitation system, thermal control sensors, mounting equipment, start-up frequency converters (for gas turbines), foundation fastenings, spare parts, and operation documents.
Generator typeCapacity
Voltage, VPhase
connection pattern
Rotation speed, rpm
Efficiency, %
Weight, kg
EmbodimentkW kVA
-16-2 N3-P 16000 20000 10500 star 3000 98.2 30500 IM 1301
-16-2 N3-G 16000 20000 10500 star 3000 98.2 30700 IM 1101
-20,4-C-2R N3-G * 20400 25500 10500 star 3000 98.2 32300 IM 1101
-25-2 N3-P 25000 31250 6300 delta 3000 98.2 56000 IM 1301
-25-2 N3-P 25000 31250 10500 star 3000 98.2 56000 IM 1301
-25-2 N3-G 25000 31250 6300 delta 3000 98.2 56900 IM 1101
-25-2 N3-G 25000 31250 10500 star 3000 98.2 56900 IM 1101
-32-C-2 N3-P 32000 40000 10500 star 3000 98.3 53300 IM 1301
-32-C-2 N3-P 32000 40000 6300 delta 3000 98.3 53300 IM 1301
-32-C-2 N3-G 32000 40000 10500 star 3000 98.3 54100 IM 1101
-32-C-2 N3-G 32000 40000 6300 delta 3000 98.3 54100 IM 1101
-37-C-2R * 37000 46250 10500 star 3000 98.0 54800 IM 1005
-37-C-2R * 37000 46250 11000 star 3000 98.0 54800 IM 1005
-37-C-2R * 37000 43530 13800 star 3600 98.0 54800 IM 1005
-40-2 N3-P 40000 50000 6300 delta 3000 98.4 69500 IM 1301
-40-2 N3-P 40000 50000 6300 star 3000 98.4 69500 IM 1301
-40-2 N3-P 40000 50000 10500 star 3000 98.4 69500 IM 1301
-40-2 N3-G 40000 50000 6300 delta 3000 98.4 70300 IM 1101
-40-2 N3-G 40000 50000 6300 star 3000 98.4 70300 IM 1101
-40-2 N3-G 40000 50000 10500 star 3000 98.4 70300 IM 1101
-50-C-2 N3-P 50000 62500 10500 star 3000 98.4 80300 IM 1101
-50-C-2 N3-G 50000 62500 10500 star 3000 98.4 80300 IM 1101
-63-2 N3-P 63000 78750 10500 star 3000 98.4 104000 IM 7101
-63-2 N3-G 63000 78750 10500 star 3000 98.4 104800 IM 7306
-65-C-2R N3-G * 65000 81250 10500 star 3000 98.4 78200 IM 1005
-65-C-2R N3-G * 65000 81250 11000 star 3000 98.4 78200 IM 1005
-65-C-2R N3-G * 65000 81250 13800 star 3600 98.4 78200 IM 1005
-80-2 N3-P 80000 100000 10500 star 3000 98.4 139800 IM 7101
-80-2 N3-G 80000 100000 10500 star 3000 98.4 139800 IM 7306
-90-2 N3-P 90000 112500 10500 star 3000 98.4 139800 IM7101
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
7
Generator typeCapacity
Voltage, VPhase
connection pattern
Rotation speed, rpm
Efficiency, %
Weight, kg
EmbodimentkW kVA
-90-2 N3-G 90000 112500 10500 star 3000 98.4 141000 IM 7306
-110-2 N3-P 110000 137500 10500 star 3000 98.45 158500 IM 7101
-110-2 N3-G 110000 137500 10500 star 3000 98.45 160500 IM 7306
-125-2 N3-P 125000 156250 10500 star 3000 98.43 164000 IM 7101
-125-2 N3-G 125000 156250 10500 star 3000 98.43 165500 IM 7306
-160-2 N3-P 160000 188000 15750 star 3000 98.5 207500 IM 7101
-160-2 N3-G 160000 188000 15750 star 3000 98.5 210000 IM 7306
-225-2 N3-P** 225000 264700 15750 star 3000 98,65 287000 IM 1301
-225-2 N3-G** 225000 264700 15750 star 3000 98,65 289000 IM 1101
Note: * rated power at incoming cooling air temperature +15 C
** Turbogenerator fits in foundation aperture of TVV-220-2N3 generator.
Embodiment:
IM 1005 - feet-based machines with two bearing shields and a single cylindrical shaft end
IM 1101 - high feet-based machines with two bearing shields and a single cylindrical shaft end
IM 1301 - high feet-based machines with one bearing shield and a single cylindrical shaft end
IM 7101 - high feet-based machines with pedestal bearings, without fundament or base plates and with a single cylindrical shaft end
IM 7306 - high feet-based machines with pedestal bearings, without fundament or base plates and with two flanged shaft ends
- XX 2 O N (NF) 3 (4) G (P)
G -connected to gas turbineP - connected to steam turbine
category of location
climatic version
open-loop ventilation
number of poles
compact line
rated capacity, MW
tubular body turbogenerator
85, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
1.2. T (TS)-series turbogenerators with 2.563 MW capacities
T-series Turbogenerators coupled with steam (P) or gas (G) turbine are designed for power generation.
Cooling system closed-loop air cooling with water air coolers or open-lop air cooling
Cooling method IC31 - 10 2R NF3
ICW37A71 or IC31 Turbogenerators with the capacity of 12, 16, 20 and 25 MW
ICW37A71 other units
Excitation system static or brushless
Location of HV leads of turbogenerators
T-2, 5-2, T-4-2, T-6-2, T-8-2, T-12-2, TS-32-2, T-50-2, TS-63-2 - lower
TS-10-2R or TS-12-2R - side
T-16-2 lower or side
TS-20-2 and T-25-2 upper, lower, or side
T-32-2 upper or lower
Protection level IP44 Turbogenerators T-2, 5-2, T-4-2, T-6-2 and T-12-2
IP55 - Turbogenerators T-25-2Z N3-G, T-25-2Z N3-P
IP54 - Turbogenerators -25-2R N3-G, T-25-2 with the capacity of 16, 20, 32, 50 MW, TS-63-2
Rated operating conditions S1
Manufactured in compliance with GOST 533 and customers specific technical requirements.
Design of turbogenerator T-25-2 is protected with utility patent No. 37439; design of turbogenerator TS-63-2 is protected with utility patent No. 36585
Certificates of conformity: No. ROSS RU.MH07.N00338 for T-25-2 N3;No. ROSS RU.MH08.N00077 for -16-2R NF3.1;No. ROSS RU.MH08.N00059 for -12-2R NF3.
Delivery set includes: turbogenerator, excitation system, thermal control sensors, mounting equipment, foundation fastenings, spare parts, and operation documents.
Generator typeCapacity
Voltage, VPhase
connection pattern
Rotation speed, rpm
Efficiency, %
Weight, kg
EmbodimentkW kVA
-2,5-2 N3 P 2500 3125 3150 star 3000 97.0 12500 IM 7011
-2,5-2 N3 P 2500 3125 6300 star 3000 97.0 12500 IM 7011
-2,5-2 N3 P 2500 3125 10500 star 3000 96.8 12500 IM 7011
-4-2 N3 P 4000 5000 3150 star 3000 97.3 15000 IM 7011
-4-2 N3 P 4000 5000 6300 star 3000 97.3 15000 IM 7011
-4-2 N3 P 4000 5000 10500 star 3000 97.0 15000 IM 7011
-6-2 N3 P 6000 7500 3150 star 3000 97.6 22500 IM 7011
-6-2 N3 P 6000 7500 6300 star 3000 97.6 20000 IM 7011
-6-2 N3 P 6000 7500 10500 star 3000 97.6 20000 IM 7011
-8-2 N3 P 8000 10000 6300 star 3000 97.6 27000 IM 7011
-12-2 N3 P 12000 15000 6300 star 3000 97.65 28025 IM 7011
-12-2 N3 P 12000 15000 10500 star 3000 97.65 28825 IM 7011
S-12-2R NF3 (G) 12000 15000 6300 star 3000 97.65 39815 IM 7211
S-12-2R NF3 (G) 12000 15000 10500 star 3000 97.65 39815 IM 7211
-16-2R NF3.1 (G) 16000 20000 6300 star 3000 97.8 61580 IM 7211
-16-2R NF3.1 (G) 16000 20000 10500 star 3000 97.8 61580 IM 7211
-16-2 N3-G 16000 20000 6300 star 3000 98.0 61800 IM 7211
-16-2 N3-G 16000 20000 10500 star 3000 98.0 61800 IM 7211
-16-2 N3-P 16000 20000 6300 star 3000 97.8 52000 IM 7121
-16-2 N3-P 16000 20000 10500 star 3000 97.8 52000 IM 7121
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
9
Generator typeCapacity
Voltage, VPhase
connection pattern
Rotation speed, rpm
Efficiency, %
Weight, kg
EmbodimentkW kVA
S-20-2 N3-G 20000 25000 6300 delta 3000 98.0 66600 IM 7211
S-20-2 N3-G 20000 25000 10500 star 3000 98.0 66600 IM 7211
S-20-2 N3-P 20000 25000 6300 delta 3000 98.0 56500 IM 7121
S-20-2 N3-P 20000 25000 10500 star 3000 98.0 56500 IM 7121
-25-2Z N3-G 25000 31250 6300 delta 3000 98.0 85550 IM 7211
-25-2Z N3-G 25000 31250 10500 star 3000 98.0 85550 IM 7211
-25-2Z N3-P 25000 31250 6300 delta 3000 98.0 75500 IM 7121
-25-2Z N3-P 25000 31250 6300 star 3000 98.0 75500 IM 7121
-25-2Z N3-P 25000 31250 10500 star 3000 98.0 75500 IM 7121
-25-2R N3-G 25000 31250 6300 delta 3000 98.0 85600 IM 7211
-25-2R N3-G 25000 31250 6300 star 3000 98.0 85500 IM 7211
-25-2R N3-G 25000 31250 10500 star 3000 98.0 85600 IM 7211
S-32-2 NF3-P 32000 40000 6300 delta 3000 98.2 78800 IM 7121
S-32-2 NF3-P 32000 40000 10500 star 3000 98.2 78800 IM 7121
-32-2 V3-P 32000 40000 6300 delta 3000 98.4 77300 IM 7121
-32-2 V3-P 32000 40000 10500 star 3000 98.4 77300 IM 7121
-32-2 V3-G 32000 40000 6300 delta 3000 98.4 80200 IM 7321
-32-2 V3-G 32000 40000 10500 star 3000 98.4 80200 IM 7321
-35-2 N3-P 35000 41176.5 6300 delta 3000 98.4 77300 IM 7121
-50-2 N3-P 50000 62500 6300 delta 3000 98.2 143000 IM 7121
-50-2 N3-P 50000 62500 10500 star 3000 98.2 143000 IM 7121
S-63-2 V3-P 63000 78750 6300 delta 3000 98.4 143000 IM 7121
S-63-2 V3-P 63000 78750 10500 star 3000 98.4 143000 IM 7121
(S) - XX - 2 R (Z) - N (V, T, NF) 3 (3.1) G (P)
G - connected to gas turbine P - connected to steam turbine
category of location
climatic version
R-open-loop ventilation Z-closed-loop ventilation
number of poles
capacity, MW
turbogenerator S turbogenerator, special version
10
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
1.3. TK-series turbogenerators with 1.563 MW capacities
Turbogenerators with open-loop ventilation coupled with gas (G) turbines are designed for power generation as a part of steam turbine power plants.
Turbogenerators TK with closed-loop ventilation coupled with steam (P) turbines are designed for power generation as apart of steam turbine power plants.
Embodiment IM 1001
Cooling system turbogenerators with open-loop ventilation air cooling (can be equipped with air treatment and recirculation unit)
turbogenerators with closed-loop ventilation through water air cooler, located at the top of the casing
Cooling method IC31 - Turbogenerators with open-loop ventilation
ICW37A81 - Turbogenerators with closed-loop ventilation
Excitation system brushless
Protection level IP54
Rated operating conditions S1
Manufactured in compliance with GOST 533 and customers specific technical requirements.
Design of Turbogenerators with open-loop ventilation is protected with utility patent No. 29188.
Certificates of conformity:No. ROSS RU. MH08. N 00064 for TK-6-2R N3;No. ROSS RU. MH08. N 00060 for TK-2.5-2R NF3.
Delivery set includes: turbogenerator, excitation system, thermal control sensors, mounting equipment, foundation fastenings, spare parts, and operation documents.
Generator typeCapacity
Voltage, V Rotation speed, rpm Efficiency, % Weight, kgkW kVA
-1,5-2R NF3 1500 1875 6300 3000 95.8 7600
-1,5-2R NF3 1500 1875 10500 3000 96.0 7600
-1,5-2Z NF3 1500 1875 6300 3000 96.0 7600
-1,5-2Z NF3 1500 1875 10500 3000 96.0 7600
-2,5-2R NF3 2500 3125 6300 3000 96.8 12700
-2,5-2R NF3 2500 3125 10500 3000 96.7 12700
-2,5-2Z N3 2500 3125 6300 3000 96.8 10500
-2,5-2Z N3 2500 3125 10500 3000 96.7 10500
-4-2R NF3 4000 5000 6300 3000 97.0 13000
-4-2R NF3 4000 5000 10500 3000 97.0 13000
-4-2Z N3 4000 5000 6300 3000 97.2 13500
-4-2Z N3 4000 5000 10500 3000 97.0 13500
-6-2R NF3 6000 7500 6300 3000 97.4 20040
-6-2R NF3 6000 7500 10500 3000 97.4 20040
-6-2Z N3 6000 7500 6300 3000 97.4 18000
-6-2Z N3 6000 7500 10500 3000 97.4 18000
- X - 2 R (Z) NF (N) 3
category of location
climatic version
R-open-loop ventilation, Z-closed-loop ventilation
number of poles
capacity, MW
mounted in a housing
turbogenerator
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
11
1.4. GTG-series turbogenerators with 2.58 MW capacities
GTG Turbogenerators coupled with gas (G) turbines are designed to operate as part of gas turbine power stations.
Embodiment IM 7211
Cooling system open-loop
Cooling method IC31
Excitation system brushless
Protection level IP54
Rated operating conditions S1
Manufactured in compliance with GOST 533 and customers specific technical requirements.
Design of Turbogenerators is protected with utility patent No. 29188.
Certificates of conformity:
No. ROSS PU. MH02. N 00058 for GTG-2, 5-2R NF3 and GTG-4-2R NF3;
No. ROSS PU. MH08. N 00068 for GTG-6-2R NF3.
Delivery set includes: turbogenerator, excitation system, thermal control sensors, mounting equipment, foundation fastenings, spare parts, and operation documents. Can be equipped with air treatment and recirculation unit.
Generator typeCapacity
Voltage, V Rotation speed, rpm Efficiency, % Weight, kgkW kVA
GTG-2,5-2R NF3 2500 3125 6300 3000 96.8 13900
GTG-2,5-2R NF3 2500 3125 10500 3000 96.7 13900
GTG-4-2R NF3 4000 5000 6300 3000 97.2 15550
GTG-4-2R NF3 4000 5000 10500 3000 97.0 15550
GTG-6-2R NF3 6000 7500 6300 3000 97.5 20500
GTG-6-2R NF3 6000 7500 10500 3000 97.5 20500
GTG-8-2R NF3* 8000 10000 6300 3000 97.6 27360
GTG-8-2R NF3* 8000 10000 10500 3000 97.5 27360
* GTG-8-2R NF3 generator may be delivered with closed-loop ventilation
GTG - XX - 2 - R NF 3
category of location
climatic version
open-loop ventilation
number of poles
capacity, MW
gas turbogenerator
12
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
1.5. Special-version turbogenerators
T-2.5-3600 T3 and T-4-3600 T3 are three phase turbogenerators with frequency of 60 Hz and Rotation speed of 3,600 rpm, equipped with electric excitation unit; they are designed to operate with steam turbine in non-explosive environment in the tropics.
TK-2.5 2Z T3 three phase turbogenerator, frequency - 50 Hz, voltage - 6,600 V, Rotation speed - 3,000 rpm, brushless excitation system, is designed for electric power generation in operation with a steam turbine in explosion-proof atmosphere in the tropics.
TM-4-3600 T3 three phase turbogenerator with frequency of 60 Hz, Rotation speed of 3,600 rpm and brushless exciter is designed to operate with steam turbine in non-explosive environment in the tropics.
T-6-2R T3.1 two plug-in friction bearing turbogenerator with brushless exciter, open loop type ventilation and side outputs location is installed in transportable automatic power stations with marine gas turbine motor drive in the tropics.
T-6-2Z N3.1 two plug-in friction bearing turbogenerator with brushless exciter, close loop type ventilation and side outputs location is designed to operate with gas-turbine motor drive under temperate conditions.
T-6-2Z T3.1 two plug-in type friction bearing turbogenerator with brushless exciter, close loop type ventilation and side outputs location is designed to operate with gas-turbine motor drive in the tropics.
T-6-2R N3 turbogenerator with top location of the stator lead is designed to operate with gas turbine motor.
T-12-2E N3 turbogenerator with top location of the stator lead is designed to be installed in packaged or floating gas-turbine power stations.
TP-12-2 N3 (T3) EP turbogenerator with the following explosion protection type Case filling or blowing under P excess pressure valve IExpxIIT5X in compliance with GOST R 51330.0. is designed for continuous running with a top pressure recovery turbine (TPRT).
T-12-2.2 N3 two pillar type friction bearing turbogenerator with bottom location of the stator lead is designed to operate with steam turbines drive.
TT-12-2A N3 turbogenerator with bottom location of the stator lead and open loop type ventilation is designed to operate with GTER-12 gas turbine drive.
T-4.5-2I T3, T-5-2I T3, T-6-2I 3, T-7.5 -2I 3, T-7, 7-2I T3, and T-12-2 T3 turbogenerators with one pillar type bearing are designed for electric power generation in operation with a steam turbine (50 Hz AC) in the tropics.
T-25-3600 T3 turbogenerator with bottom location of the stator lead and closed-loop type ventilation, on two pillar type friction bearings, without base plate is designed for electric power generation in operation with a steam turbine (60 Hz AC) in the tropics.
Delivery set includes: turbogenerator, excitation system, thermal control sensors, mounting equipment, foundation accessories, spare parts, and operation documents.
Generator typeCapacity
Voltage, V Rotation speed, rpm Efficiency, % Weight, kgkW kVA
-2.5-3600 3 2500 3125 6300 3600 96.5 12500
-2.5-2Z 3 2500 3125 6600 3000 96.8 10500
-4-3600 3 4000 5000 6300 3600 96.6 15000
-4-3600 3 4000 5000 6300 3600 96.6 15000
-4.5-2I 3 4500 5625 11000 3000 97.2 20000
-5-2I 3 5000 6250 11000 3000 97.4 21120
-6-2R 3.1 6000 7500 6300 3000 97.3 16000
-6-2R 3.1 6000 7500 10500 3000 97.3 16000
-6-2Z N3.1 6000 7500 6300 3000 97.3 16800
-6-2Z N3.1 6000 7500 10500 3000 97.3 16800
-6-2Z 3.1 6000 7500 6300 3000 97.3 16800
-6-2Z 3.1 6000 7500 10500 3000 97.3 16800
-6-2I 3 6000 7500 6600 3000 97.6 23500
-6-2I 3 6000 7500 11000 3000 97.6 24000
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
13
Generator typeCapacity
Voltage, V Rotation speed, rpm Efficiency, % Weight, kgkW kVA
-6-2E N3 6000 7500 6300 3000 97.48 22850
-7.5-2I 3 7500 9375 11000 3000 97.7 26100
-7.7-2I 3 7700 9625 11000 3000 97.6 26100
-12-2 3 12000 15000 6600 3000 98.0 29000
-12-2 3 12000 15000 11000 3000 98.0 30450
-12-2E N3 12000 15000 6300 3000 97.65 29800
-12-2E N3 12000 15000 10500 3000 97.65 30400
P 12-2 N3 (3) 12000 15000 6300 3000 97.65 28600
P 12-2 N3 (3) 12000 15000 10500 3000 97.65 29400
P 12-2 N3 (3) 12000 15000 11000 3000 97.65 29800
-12-2.2 N3 12000 15000 6300 3000 97.65 29880
-12-2.2 N3 12000 15000 10500 3000 97.65 30680
-12-2 N3 12000 15000 10500 3000 97.65 31800
-25-3600 3 25000 31250 10500 3600 97.7 59900
(P, ) - X - 2 - R (Z) I (E, ) N() 3 (3.1)
category of location
climatic version
E - for packaged and floating power stations,A - for delivery to Argentina,I - for delivery to India
R - open ventilation loopZ - close ventilation loop
number of poles
capacity, MW
T-turbogeneratorTP-ventilated turbogeneratorTK- casing-type turbogenerator
() - XX - 3600 3
category of location
climatic version
rotation speed, rpm
capacity, MW
T-turbogeneratorTM marine turbogenerator
14
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
2. HYDRO TURBINES GENERATORSThe production facilities of NPO Privod LLC allow the manufacture of air-cooled hydro turbines generators with a wide range of capacities, from 1 to 300 MW, vertical or horizontal types of constructions, thus ensuring that almost any customers requirements are met. The team of the Companys specialists and designers of the engineering center of Electrotyazhmash-Hydroengineering LLC have a wealth of experience in designing of the new hydro turbines generators and retrofitting of the obsolete ones at the operated hydropower stations both in Russia and abroad.
The hydro turbines generators are delivered complete with auxiliary systems (excitation, cooling, braking, fire-extinguishing, thermal control and others), sets of spare parts, tools and accessories for installation and for guaranteed and designed commercial operation.
Fabrication is in line with GOST 5616-89 and specific technical requirements of the customer.
List of hydro turbines generators in production, with facilities at which they operate:
Type of hydro turbine
generatorCapacity, kW
Rotation speed, rpm
Voltage, V Embodiment Qnty Operating companyYear of supply
Country
VGS 260/20-24 680 250 6300 vertical 1 Kuzu Gusarksaya HPS 1955 Uzbekistan
VGS 260/20-24 680 250 6300 vertical 2 Skorodninskaya HPS 1957 Russia
VGS 260/34-24 1250 250 6300 vertical 1 Mozhayskaya HPS 1958 Russia
VGS 260/34-24 1250 250 6300 vertical 1 Sheshnevskaya HPS 1959 Russia
SGG 1600-600 1600 600 6300 horizontal 2 Gergebilskaya HPS 1959 Russia
GS 213/15-24 200 250 400/230 1 HPS Krasnoy Armii 1960 Turkmenistan
VGSP 213/24-28 400 214.3 6300 vertical 2 Kudrinskaya HPS 1960 Kazakhstan
VGSP 215/24-16 800 375 6300 vertical 2 Antonovskaya HPS 1960 Kazakhstan
VGSP 213/15-20 320 300 400/230 vertical 1 HPS Aksu 1961 Kazakhstan
VGSP 215/20-20 500 300 6300 vertical 2 HPS Murgab 1961 Tajikistan
VGSP 213/29-14 1000 428.6 6300 vertical 2 Uslenovskaya HPS 1961 Russia
SGG 2500-750 2500 7500 6300 horizontal 3 Zeykhurskaya HPS 1961-1963 Azerbaijan
VGSP 325/69-28 4000 214.3 6300 vertical 1 HPS Ladyzhinskaya 1962 Russia
VGSP 213/24-28 400 214.3 400/230 vertical 1 Okulovskaya HPS 1963 Russia
VGS 260/24-24 840 250 6300 vertical 1 HPS of the Shershinskoye water reservoir
1963 Russia
VGS 260/34-24 1250 250 6300 vertical 1 Belokholunitskaya HPS 1963 Russia
VGS 375/79-24 8800 250 6300 vertical 1 Tsentralnaya HPS 1963 Russia
VGSP 213/29-14 1000 428,6 6300 vertical 2 Sergeyevskaya HPS 1964 Kazakhstan
VGS 260/34-24 1250 250 6300 vertical 4 Ruzskaya HPS 1964 Russia
VGS 4500-375 4500 375 6300 vertical 1 Sosenskaya HPS 1964 Russia
VGS 525/150-20 46000 300 10500 vertical 1 Kubanskaya HPS-2 1964 Russia
VGS 213/24-14 800 428.6 6300 vertical 3 HPS Vanch 1966 Georgia
VGSP 215/20-20 500 300 6300 vertical 1 HPS Shudisand 1967 Kirghizia
VGSP 215/20-20 500 300 6300 vertical 2 HPS Shudsksand 1967 Tajikistan
VGS 275/140-10 14350 600 6300 vertical 2 HPS Chamezgi 1967 Abkhazia
SGG 2000-600 2000 600 6300 horizontal 5 HPS Khorog 1967-1972 Tajikistan
VGS 325/89-14 10000 428.6 6300 vertical 3 Atbashinskaya HPS 1969-1970 Kirghizia
VSG 260/31-18 1600 333.3 6300 vertical 2 HPS Mansur 1972 Morocco
VSG 260/31-18 1600 333.3 6300 vertical 1 Vazuzskaya hydrosystem 1972 Russia
VSG 260/31-18 1600 333.3 6300 vertical 2 HPS 34 of Mozhaysky waterworks
1997 Russia
SV-260/65-12 6000 500 6300 vertical 1 Sengileyevskaya HPS 2005 Russia
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
15
Type of hydro turbine
generatorCapacity, kW
Rotation speed, rpm
Voltage, V Embodiment Qnty Operating companyYear of supply
Country
SV-465/215-16 56100 375 10500 vertical 1 HPS Argel 2005 Armenia
VGS-1525/135-120 66000 50 10500 vertical 3 Saratovskaya HPS 2005-2007 Russia
SV-328/79-32 NF4 3550 187,5 10500 vertical 4 Yegorlykskaya HPS 2 2009 Russia
SV-448/140-18 4 43470 400 13800 vertical 2 HPS Baytun 2011 Panama
SV-783/105-40 52250 150 13800 vertical 1 HPS Rukatayo 2011 Chile
SV-640/140-30 50000 200 10500 vertical 2 Gotsatlinskaya HPS 2012 Russia
Generators in the process of fabrication
Type of hydro turbines
generatorCapacity, kW
Rotation speed, rpm
Voltage, V Embodiment Qnty Operating companyYear of supply
Country
VGSM 1525/135-120 66000 50 10500 vertical 2 Saratovskaya HP 2013-2014 Russia
SV-360/100-16 16150 450 13800 vertical 3 HPS Sarapuyo 2015 Equador
SV-580/190-24 68000 300 13800 vertical 3 HPS Ayurikin 2015 Equador
SV-845/135-40 73000 150 10500 vertical 7 Ust-Hantaiskaya HPS 2014-2021 Russia
VGS (VGS, SV, VSG, GS) - XXX / YY - NF () 4
category of location
climatic version
number of poles
stator core, size, cm
stator core diameter, cm
VGS - synchronous vertical hydro-generatorVGSM modernized synchronous vertical hydrogeneratorSV - synchronous verticalVSG - synchronous vertical hydro-generator GS synchronous hydrogenerator
SGG XXXX - YYY NF 4
category of location
climatic version
rotation speed, rpm
capacity, kW
synchronous horizontal hydrogenerator
16
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
3. SMALL CAPACITY GENERATORS
3.1. SG and SGD synchronous generators
SG 16-31.5-6 Nf3 synchronous generator is designed for power generation with gas turbine, and SGD 16-31.5-2 Nf2 synchronous generator with diesel motors.
They are installed in transportable power stations.
Embodiment IM 1001
Cooling system air cooling, open-loop
Cooling method IC01
Excitation system brushless
Protection level IP22
Rated operating conditions S1
Manufactured in compliance with GOST 52776-2007 and customers specific technical requirements.
Delivery set includes: generator, exciter, control station, spare parts, and operation documents.
Type of productCapacity
Voltage, V Rotation speed, rpm Efficiency, % Weight, kgkW kVA
SG16-31.5-6 NF2 1000 1250 6300 1000 95.0 5450
SGD16-31.5-6 NF2 1000 1250 6300 1000 95.2 5600
SG (SGD) - 16 - 31.5 - 6 NF 2category of location
climatic version
number of poles
stator core size, cm
size designation
synchronous diesel generator
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
17
3.2. SG-600-2 Nf3 and SGV-600-2 Nf3 synchronous generators
The SG-600-2 Nf3 and SGV-600-2 Nf3 synchronous generators are designed to generate power as part of pneumatic electric generator units on the basis of energy derived from gas pressure differences in gas production, transportation and distribution systems
Embodiment IM 1103
Height of rotation axis 300 mm
Cooling system open-loop. Generator is cooled with the natural gas passing through the shell (about 98% methane) in compliance with GOST 51.40-93. Cooling of the excitation control unit air self-cooling
Excitation system brushless. Generator SGV2 600 2 NF3 allows connection to mains by self-synchronization
Protection level IP10
Rated operating conditions S1
Manufactured in compliance with GOST 52776-2007 and customers specific technical requirements.
Delivery set includes: generator, excitation system with control unit, spare parts, and operation documents.
Type of generatorCapacity
Voltage, V Rotation speed, rpmEfficiency,
%Power factor Weight, kg
kW kVA
SG-600-2 NF3 600 750 400 3000 89.0 0.8 2040
SGV-600-2 NF3 600 750 10500 3000 90.0 0.8 2050
SGV2-600-2 NF3 600 750 10500 3000 90.0 0.8 2050
SG (SGV) - 2 - 600 - 2 NF 3category of location
climatic version
number of poles
capacity, kW
series
synchronous generator (high-voltage synchronous generator )
18
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
3.3. Synchronous diesel generators
Synchronous diesel generators are designed to generate power as a part of diesel power plants. Designed for use as a main or standby three phase AC power supply driven by combustion motors.
Embodiment IIM 1305 GSD generatorsIM 1101 SGDP generators
Cooling system air cooling, open-loop
Cooling method IC01 - GSD-800-750 NF2 (NF4), GSD-1000-1000 NF4IC31 - GSD-1650-1000 NF2 (N2, T2), GSD-1600-1000 NF4, GSD-1100-1000 NF2 ICW37A71 - SGDP-3150-12 N3
Excitation system brushless
Protection level IP23 - GSD-800-750 NF4IP44 other generators
Explosion protection type and level
ExpIIT3 - SGDP-3150-12 U3
Rated operating conditions S1
Manufactured in compliance with GOST 52776-2007 and customers specific technical requirements.
Delivery set includes: exciter, excitation controller, excessive pressure monitor (for SGDP-3150-12N3), component parts, and operation documents.
Type of generatorCapacity
Voltage, V Rotation speed, rpm Efficiency, % Weight, kgkW kVA
GSDF-800-750 NF3 (3) 800 1000 6300 750 95.0 6600
GSD-800-750 NF2 800 1000 6300 750 95.2 6010
GSD-800-750 NF2 800 1000 10500 750 95.5 6110
GSD-800-750 NF4 800 1000 400 750 95.2 5750
GSD-1000-1000 NF4 1000 1250 400 1000 96.1 5650
GSD-1000-1000 NF4 1000 1250 6300 1000 95.9 5450
GSD-1000-1000 NF4 1000 1250 11000 1000 95.9 5450
GSD-1100-1000 NF2 1100 1375 6300 1000 96.2 6180
GSD-1100-1000 NF2 1100 1375 10500 1000 96.0 6145
GSD-1600-1000 NF4 1600 2000 10500 1000 95.5 9000
GSD-1650-1000 NF2 (N2, 2) 1650 2062 6300 1000 95.8 9000
GSD-1650-1000 NF2 (N2, 2) 1650 2062 10500 1000 95.5 9000
SGDP-3150-12 N3 3150 3938 6300 500 96.0 24000
GSD F - XXX - XXX NF (N, ) 2 (3, 4)
category of location
climatic version
rotation speed
capacity, kW
flanged
synchronous diesel generator
SGDP - 3150 - 12 N 3
category of location
climatic version
number of poles
capacity, kW
synchronous, ventilated diesel generator
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
19
3.4. GS synchronous generators
The synchronous diesel generators are designed to generate three phase AC electric power as a part of a bio-energy plant.
Embodiment IM 1001
Cooling system air cooling, open-loop
Cooling method IC01
Excitation system brushless
Protection level IP22
Rated operating conditions S1
Manufactured in compliance with GOST 52776-2007 and customers specific technical requirements.
Delivery set includes: generator, exciter, control station, half-coupling, key, spare parts, and operation documents.
Type of generatorCapacity
Voltage, V Rotation speed, rpm Efficiency, % Weight, kgkW kVA
GS-600-1500 NF2 600 750 6300 1500 95.75 3700
GS-630-1500 NF2 630 787.5 400 1500 96.04 3700
GS - XXX - 1500 NF 2
category of location
climatic version
rotation speed
capacity, kW
synchronous generator
20
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
3.5. SGTK synchronous generators
The synchronous diesel generators are designed for application in modern high efficiency power generators based on gas piston engines manufactured by Kawasaki Heavy Industries (Japan).
Cooling system air cooling, open-loop
Cooling method open-loop IC 01 ventilation
Excitation system static or brushless
Protection level IP23
Temperature classification: isolation / application
Class F/ Class B
Rated operating conditions S1
Manufactured in compliance with GOST 52776 and customers specific technical requirements.
SGTK synchronous generators construction is patented.
Special characteristics:
unique embodiment; low noise level; low vibration level; high efficiency index; high efficiency cooling system; easy maintenance; high level technical design.
Type of generatorCapacity
Voltage, VPhase
connection pattern
Rotation speed, rpm
Efficiency, %
Weight, kg
EmbodimentkW VA
SGTK-5200-750 NF4 5200 6500 10500 star 750 97,3 24500 IM 1101
SGTK-7800-750 NF4 7800 9750 10500 star 750 97,5 31500 IM 1101
* Design according to installation type (GOST 2479): IM 1101 - Machines with feet, two bearing shields and one cylindrical shaft end
SGTK - 5200 (7800) - 750 NF 4
category of location
climatic version
rotation speed
capacity, kW
synchronous generator
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
21
4. GENERATOR ExCITATION CONTROL SYSTEMS
4.1. Brushless diode excitation systems (SVBD) The SVBD-type excitation systems are fabricated in compliance with the technical specifications KNPG 651441.004 TU and meet the requirements of GOST 21558-2000. The SVBD-type excitation systems have a certificate of conformity to GOST-R No. 0716430.
Depending on the generator type capacity, the SVBD system consists of the following assembly units: diode brushless exciter (VBD or 2VBD); generator excitation control cabinet (ShUBGM); rotor protection cabinet (ShZR), as required; dropping resistor, consisting of one or several resistor blocks (BR), as required.
4.1.1. Synchronous generators excitation control cabinets ShUVGMDigital control systems for brushless exciters of synchronous generators ShUVGM are designed for the following functions:
supplying of the excitation windings of the exciters for synchronous turbine generators with automatically controlled current; initial excitation of the generator to the set point; adjustment of the generator voltage to the mains voltage; line and dedicated load operation in all permissible modes from idling to rated load; operation in the auto and manual control modes with bumpless switching between the modes; bumpless switching between the channels for a two-channel system; excitation forcing in the case of voltage drop at the generators busbars; limitation of the minimal excitation by the generator performance curve; limitation of the forcing excitation current value by the set level and duration; excitation winding overload limitation; generator field suppression in the case of emergency and normal shutdown; communication with the higher-level ACS.
The ShUVGM excitation control systems provide supplying of the excitation windings of the brushless exciters for synchronous turbine generators with the capacity of up to 60 MW and higher with automatically controlled direct current.
Manufactured in compliance with GOST R 21558-2000 and customers specific technical requirements.
Delivery set includes: control cabinet; set of feeding transformers, type OLS-1.25/6(10) U2 3 pcs, or 3AC380V/240V, 4kVA 1(2) pcs upon request; set of spare parts and accessories; operation documents.
Main technical parameters ShUVGM-200-1(2) -15-100 ShUVGM-200- -2 -15-100 ShUVGM-200N (C)-2 -20-100
Rated rectified voltage, V 100 100 100
Rated rectified current, A 15 15 20
Current forcing ration, power units (relative to Iin rated), not less than 2,0 2,0 2,5
Forcing duration, sec, not less than 20 (50) 20 (50) 20 (50)
Rated supply voltage, V
AC 380 380 380
control DC 220 (110) 220 (110) 220 (110)
Servicing One-sided Single-sided One-sided
Protection class IP21 or other upon request
Climatic version NF, U,
Location category 4
Overall dimensions LxBxH 800x600x2000
Recommended generator capacity Up to 60
* The power supply circuit of exitation system (independent, self-excitation) is defined by the customer
22
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
ShUVGM - 200 (S) - 1 (2) - 15 - 100 NF (U, ) 4
location category
climatic version
rated rectified voltage, V
rated current of cabinet (rectified), A
natural cooling
number of control channels for control and power parts
controller series, S self-excitation
microprocessor-based generator excitation control cabinet
Excitation control cabinets ShUVGM with improved technical characteristics
Main technical parametersShUVGM-250-1(2) -15-
100 ASTShUVGM-S-250-1(2)
-15-100 ASTShUVGM-(S)-250N-
2-20-100 ASTShUVGM-S-250-
2-8-80 ShUVGM-S-PSS-2-20-100 Nf4,
Rated rectified voltage, V 100 100 100 80 100
Rated rectified current, A 15 15 20 8 20
Current forcing ration, power units (relative to Iin rated), not less than
2,0 2,0 2,5 2,5 2,5
Forcing duration, sec, not less than
20 (50) 20 (50) 20 (50) 20 (50) 20 (50)
Rated supply voltage, V
AC/DC 380 380 380 380 380/350
control DC 220 (110) 220 (110) 220 (110) 27 or 220 220 (110)
Servicing Two-sided, one-sided Two-sided, one-sided Two-sided, one-sided One-sided One-sided
Protection class IP21 or other upon request
Climatic version NF, U,
Location category 4
Overall dimensions LxBxH 800x600x2,000 one-sided, 600x600x2,000 two-sided 600x400x1100 - one-sided 8006002000-one-sided
Recommended generator capacity
Up to 60 Up to 25 Over 60
SHuVGM - S - 250 - 1 (2) - 15 - 100 S NF (U, ) 4
location category
climatic version
A autosynchronizer;S - system stabilizer PSS2B; telecontrol.
rated rectified voltage, V
rated current of cabinet (rectified), A
natural cooling
number of control channels for control and power parts
controller series
self-excitation
microprocessor-based generator excitation control cabinet
features of ShUVGM-(S)-250 series cabinets:
Ethernet Communication interfaces (Modbus protocol), Profibus; Integrated generator protections (27, 59, 81O, 81U, 32R, 40Q, 25); Programmable I/Os of the ARV controller (automatic excitation control); Advanced service functions (event log, oscillograph, recorder); Real time clock.
Additional functions of ShUVGM-(S)-250 series cabinets:
A - Autosynchronizer integrated in the ARV controller (option);
- PSS2B-type system stabilizer integrated in the ARV controller (option);
- Digital interface control (telecommunication), option.
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
23
ShUVGM - S - PSS - 1 (2) - 20 - 100 NF (U, ) 4
location category
climatic version
rated rectified voltage, V
rated current of cabinet (rectified), A
natural cooling
number of control channels for control and power parts
PSS2B system stabilzer
self-excitation
microprocessor-based generator excitation control cabinet
features of ShUVGM-(S)- PSS series cabinets:
The utilized controller passed the comprehensive tests at the TSO RDO branch office (Transmission System Operator Regional Dispatching Office) and is recommended for use at the power plants of the Unified Energy System of Russia for generators of any capacity;
Advanced service functions (event log, oscillograph, recorder); Improved parameters of the generators power part; Color touch panel with data storing in a FLASH memory; Time synchronization (by NTP protocol)
4.1.2 Rotor protection cabinets ShZR and resistor blocks BR.The cabinets are designed for protection of the rotor winding against commutation and transition overvoltages and against rotor fault to ground.
Delivery set: Rotor protection cabinet; Resistor block(s) BR-20; Set of spare parts and accessories; Operation documents
Main technical parameters ShZR-500-300
Rated voltage, V 300
Rated current, A 500
Rates supply voltage, V
control AC 220
control DC 220
Servicing One-sided
Protection class IP21 or other upon request of the customer
Climatic version 4
Location category NF, U,
Overall dimensions LxBxH 6006002000
Resistor blocks BR are designed for bypassing the rotor winding in case of activation of the excitation system protections.
Main technical parameters -20
Power, W 21500
Protection class IP21 or other upon request of the customer
Location category 4
Climatic version NF, U,
Overall dimensions LxBxH 780750900
24
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
4.1.3. Control systems for synchronous generators brushless exciters ShUVG
Digital excitation control systems ShUVG are designed for supplying of the excitation windings of the exciters for synchronous turbine generators with automatically controlled current and have the following functions:
initial excitation; excitation field suppression; adjustment of the generator voltage to the mains voltage before connection of the generator to the mains; equipment monitoring and fault diagnostics; adjustment and control in the normal and emergency operating conditions of the turbine generator; communication with the higher-level control and monitoring; package of protections for the excitation system equipment and generator (brushless exciter against abnormal conditions and loss of excitation; generator rotor against
overloading and overheating; generator against stator overvoltage and underfrequency).
ShUVG-200 Nf4 is designed for excitation control of generators GTG, TK, and T with the capacity of up to 8 MW.
ShUVG-220 Nf4, ShUVG-240 Nf4 are designed for excitation control of generators GTG, TK, T, and TS with the capacity of up to 32 MW.
Manufactured in compliance with GOST 21558-2009 and specific technical requirements of the customer.
features:
ShUVG-200 Nf4: compact cabinet; IP44 protection class; function of the turbine generators parameters recording in the normal and emergency conditions with the adjustable discretization of the registered parameters
recording, the nominal value is 0.1 sec; user-friendly function of records archive copying and data viewing using a FLASH memory; two industrial interfaces RS-485 for communication with ACS of the power plant and backup panel; function of ShUVG-200 remote control and parameters setting, using the backup operators panel; autosynchronizer functions at the software level, for connection to the mains by the precise synchronization method; the necessity to use a separate cabinet for the
autosynchronizer is eliminated; generators reactive power unloading for normal generator shutdown;
ShUVG-220 Nf4, ShUVG-240 Nf4: function of remote control and parameters setting, using the backup operators panel, via RS-485
Delivery set: control cabinet; set of feeding transformers, type OLS-1,25/6(10) U2 (for ShUVG-220 NF4 and ShUVG-240 NF4 3 pcs, for ShUVG-200 NF4, ShUVG-200 NF4 1 pc) upon request; set of spare parts and accessories (including software for ShUVG adjustment using the digital communication channel); operation documents.
Main technical parameters ShUVG-200 Nf4ShUVG-220 Nf4
ShUVG-240 Nf4
Rated excitation winding voltage, V 60 90
Rated current, A up to 25
Current forcing ratio, power units 2
Forcing duration, sec, not less than 50
Rated supply voltage, V
AC 220 3380
control DC 27 or 220 110 or 220
Servicing One-sided ShUVG-220 NF4 one-sided;
ShUVG-240 NF4 two-sided
ShUVG - 2 0 (2; 4) 0 NF 4
location category
climatic version
for brushless exciters
0 in one-sided service cabinet of compact design with one matching transformer2 in one-sided service cabinet with one matching transformer4 in two-sided service cabinet with two matching transformers
two-channel system with the AVR automatic excitation controller and excitation current controller
generator excitation control cabinet
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
25
4.2. Static generator excitation systems STS(N)
Static generator excitation systems with energization from the generators busbars (STS) and with energization from an independent source or after the generator breaker (STSN) are designed for the following functions:
supplying of the excitation windings of the generators with automatically controlled current in the normal and emergency operating conditions; initial excitation of the generator to the set point; adjustment of the generator voltage to the mains voltage; line and dedicated load operation in all permissible modes from idling to rated load; operation in the auto and manual control modes with bumpless switching between the modes; bumpless switching between the channels for a two-channel system; excitation forcing in the case of voltage drop at the generators busbars; limitation of the minimal excitation by the generator performance curve; limitation of the forcing excitation current value by the set level and duration; excitation winding overload limitation; generator field suppression in the case of emergency and normal shutdown; communication with the higher-level ACS.
Manufactured in compliance with GOST 21558-2000 and specific technical requirements of the customer.
Main technical parameters
Rated excitation current, A from 300 to 3,000
Rated excitation voltage, V from 120 to 450
Rectifier transformer supply voltage, kV 6.3; 10.5; 13.8; 15.75; 20
Protection class IP21, IP22, IP23 or other upon request of the customer
Climatic version NF, U,
Location category 4
Generator and transfer protections (as per ANSI Code), integrated in the excitation systems or as a separate cabinet*: overexcitation protection (24); positive-sequence undervoltage protection (27); reverse power protection (32); excitation loss protection (40); negative-sequence current protection (46); phase-to-phase fault current protection (50); generator breaker failure protection (50BF); voltage-dependent current protection (51V); stator winding earth fault protection* (51N, 59N); generator overvoltage protection (59); rotor earth fault protection (64); generators longitudinal differential protection* (87); additional rectifier transformers protections*; other protections as agreed upon with the customer.
*Supplied optionally upon request of the customer.
STS(N) 1 (2) P(E) XX - XXX - 2,5 NF (U, ) 4
location category
climatic version
voltage forcing ratio
rated rectified current, A
rated voltage, V
P forced coolingE natural cooling
number of control channels for control and power parts
STS self-exitation STSN idepended power supply
A backup excitation input cabinet (ShVRV) can be supplied based on a supplementary agreement.
26
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
5. TURBOGENERATOR LIfE SUPPORT SYSTEMS5.1. Air cleaner and air recirculation unit
The air cleaner and air recirculation unit is designed to run in conjunction with TK-series open loop ventilation turbogenerators, and serves to clean and pre-heat air flowing into the generator.
The air flowing into the generator is heated by means of utilizing heat removed from operational losses. The cooling air recirculation system ensures generator start-up and operations within a temperature range of 60 C below zero to 5 C above zero.
Climatic version NF.
Category of location 3.
The air-mixing chamber should be located inside the generator container, and the air cleaning chamber should be stationed on the container roof.
Parameters and performance data Norms
Rated capacity of air flow, m3/hour 4.68
Efficiency of dust particles removal, size 10 mkm and more, % 98
Hydraulic friction, Pa 415
Module weight, kg 1,290
5.2. Water recirculation devices in air coolers
The devices are designed to arrange closed loop water recirculation in air coolers of T32 generators preventing condensation during cold seasons.
Performance data of devicesfor turbogenerators
20 and 32 MWfor turbogenerators
25 and 63 MW
Maximum water flow, m3/hour 170 250
Size, mm 2,5832,7201,850 2,6402,7841,832
Weight, kg 2,600 2,800
5.3. Oil supply device for turbogenerator bearings
The oil supply device is designed to provide lubrication to bearings of TS-20, T-16, and T-25 turbogenerators with the capacity of 20-32 MW during their joint operation with a gas turbine.
Performance data of device Norms
Oil flow rate for 2 bearings, l/min 110
Oil pressure at input of bearings, MPa min 0,03, max 0,1
Size, mm 3,4503,120980
Weight, kg 4,290
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
27
6. TWO POLE SYNCHRONOUS MOTORS, HIGH-SPEED
6.1. STDM-series motors with 6302,000 kW capacities
STDM-series synchronous turbomotors with the capacity of 630...2,000 kW with 50 Hz AC three phase power supply are designed to operate pumps, compressors, gas pressurizers, air blowers and other fast-running devices operated in the enclosed rooms with explosion-proof atmospheres in conditions of temperate climates.
Embodiment IM 7211, IM 7311
Cooling system motors with closed-loop ventilation air cooling, with integrated air coolers operated on fresh water (or on sea water, as greed upon with the manufacturer)
motors with open-loop ventilation - air cooling, heated air is discharged through louvers in the stator casing
Cooling method closed-loop ventilation - ICW37A71
open-loop ventilation - IC31
Excitation system from digital thyristor excitation systems STSN or VTE10-315-series analog thyristor exciters (on request)
Start direct or reactance start, depending on the value of flywheel moments of driven equipment. Frequency starts from thyristor frequency converters (thyristor starter) are possible -as agreed upon with the manufacturer.
Protection level closed-loop ventilation - I44open-loop ventilation - I22
Rated operating conditions S1
Manufactured in compliance with GOST R 52776-2007 and customers specific technical requirements.
Delivery set includes: motor, thermal control sensors, pressure switch sensor, foundation fastenings, mounting equipment, spare parts, and operation documents. On customers request, the motor can be equipped with soft starter SSM-HV and frequency converter HV-VFD.
Type of motorCapacity,
kWVoltage,
VRotation speed, rpm Efficiency, % Weight, kg
STDM-630-2R NF4 630 6000 3000 95.9 3800
STDM-630-2R NF4 630 10000 3000 95.7 3800
STDM-630-2Z NF4 630 6000 3000 95.9 4400
STDM-630-2Z NF4 630 10000 3000 95.7 4400
STDM-800-2R NF4 800 6000 3000 96.1 4000
STDM-800-2R NF4 800 10000 3000 95.9 4000
STDM-800-2Z NF4 800 6000 3000 96.1 4600
STDM-800-2Z NF4 800 10000 3000 95.9 4600
STDM-1000-2R NF4 1000 6000 3000 96.5 4500
STDM-1000-2R NF4 1000 10000 3000 96.1 4500
STDM-1000-2Z NF4 1000 6000 3000 96.5 5000
STDM-1000-2Z NF4 1000 10000 3000 96.1 5000
STDM-1250-2R NF4 1250 6000 3000 96.9 6000
STDM-1250-2R NF4 1250 10000 3000 96.5 6000
STDM-1250-2Z NF4 1250 6000 3000 96.9 6400
STDM-1250-2Z NF4 1250 10000 3000 96.5 6400
STDM-1600-2R NF4 1600 6000 3000 97.0 6200
STDM-1600-2R NF4 1600 10000 3000 96.7 6200
STDM-1600-2Z NF4 1600 6000 3000 97.0 7000
STDM-1600-2Z NF4 1600 10000 3000 96.7 7000
STDM-2000-2R NF4 2000 6000 3000 97.0 6600
STDM-2000-2R NF4 2000 10000 3000 96.9 6600
28
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
Type of motorCapacity,
kWVoltage, V Rotation speed, rpm Efficiency, % Weight, Kg
STDM-2000-2Z NF4 2000 6000 3000 97.0 7500
STDM-2000-2Z NF4 2000 10000 3000 96.9 7500
STDM - XXXX - 2 R (Z) NF 4
category of location
climatic version
R-open-loop ventilation,Z-closed-loop ventilation
number of poles
capacity, kW
three phase synchronous modernized motor
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
29
6.2. STD - series motors with 2,500...12,500 kW capacities
STD-series synchronous turbomotors with the capacity of 2,500...12,500 kW with 50 Hz AC three phase power supply are designed to operate pumps, compressors, gas pressurizers, air blowers and other fast-running devices operated in the enclosed rooms with explosion-proof atmospheres in conditions of temperate climates.
Embodiment IM 7211, IM 7311
Cooling system motors below 8,000 kW and 12.5 MW air cooling, closed- or open-loop
10 MW Motors - air cooling, closed-loop
motors with closed-loop ventilation have integrated air coolers operated on fresh water (or on sea water, as greed upon with the manufacturer)
in motors with open-loop ventilation, heated air is discharged through louvers in the stator casing
motors with the capacity of 6,300; 8,000 kW with open-loop ventilation are manufactured with integrated coarse and fine air intake filters and ducts for air removal outside the service area
Cooling method closed-loop ventilation - ICW37A71
open-loop ventilation - IC31
Excitation system from digital thyristor excitation systems STSN or VTE10-315-series analog thyristor exciters (on request), or from brushless exciters type BVU
Start direct or reactance start, depending on the value of flywheel moments of driven equipment. Frequency starts from thyristor frequency converters (thyristor starter) are possible -as agreed upon with the manufacturer
Protection level closed-loop ventilation - I44open-loop ventilation - I22
Rated operating conditions S1
Manufactured in compliance with GOST R 52776-2007 and customers specific technical requirements.
Delivery set includes: motor, thermal control sensors, pressure switch sensor, foundation fastenings, mounting equipment, spare parts, and operation documents. On customers request, the motor can be equipped with excitation device, soft starter SSM-HV and frequency converter HV-VFD.
Type of motorCapacity,
kWVoltage,
VRotation speed, rpm Efficiency, % Weight, Kg
STD-2500-2R NF4 2500 6000 3000 97.2 10000
STD-2500-2R NF4 2500 10000 3000 97.0 10000
STD-2500-2Z NF4 2500 6000 3000 97.2 11100
STD-2500-2Z NF4 2500 10000 3000 97.0 11100
STD-3150-2R NF4 3150 6000 3000 97.3 11060
STD-3150-2R NF4 3150 10000 3000 97.2 11060
STD-3150-2Z NF4 3150 6000 3000 97.3 12300
STD-3150-2Z NF4 3150 10000 3000 97.2 12300
STD-4000-2R NF4 4000 6000 3000 97.5 11580
STD-4000-2R NF4 4000 10000 3000 97.4 11580
STD-4000-2Z NF4 4000 6000 3000 97.5 12920
STD-4000-2Z NF4 4000 10000 3000 97.4 12920
STD-4000-2RG NF4 4000 6000 3000 97.5 11710
STD-4000-2RG NF4 4000 10000 3000 97.4 11710
STD-5000-2R NF4 5000 6000 3000 97.6 13700
STD-5000-2R NF4 5000 10000 3000 97.5 13700
STD-5000-2Z NF4 5000 6000 3000 97.6 14700
STD-5000-2Z NF4 5000 10000 3000 97.5 14700
STD-6300-2 NF4 6300 6000 3000 97.6 21390
STD-6300-2 NF4 6300 10000 3000 97.5 21100
STD-6300-2RB NF4 6300 6000 3000 97.6 22830
30
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
Type of motorCapacity,
kWVoltage, V Rotation speed, rpm Efficiency, % Weight, Kg
STD-6300-2RB NF4 6300 10000 3000 97.5 22130
STD-6300-2R NF4 6300 6000 3000 97.6 22000
STD-8000-2 NF4 8000 6000 3000 97.9 23950
STD-8000-2 NF4 8000 10000 3000 97.7 23000
STD-8000-2R NF4 8000 6000 3000 97.9 23950
STD-8000-2R NF4 8000 10000 3000 97.7 23000
STD-8000-2RB NF4 8000 6000 3000 97.9 23950
STD-8000-2RB NF4 8000 10000 3000 97.7 23000
STD-10000-2 NF4 10000 6000 3000 97.8 26520
STD-10000-2 NF4 10000 10000 3000 97.9 26000
STD-12500-2 NF4 12500 6000 3000 97.9 29500
STD-12500-2 NF4 12500 10000 3000 97.8 28900
STD-12500-2R NF4 12500 6000 3000 97.9 29500
STD-12500-2R NF4 12500 10000 3000 97.8 28900
STD - XXXX - 2 R (Z) G (B) NF 4
category of location
climatic version
B-with side outputs G-for EGPU drive (only for STD-4000-2GR NF4)
R-open-loop ventilation,Z-closed-loop ventilation
number of poles
capacity, kW
three phase synchronous motor
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
31
6.3. STD motors, special version
STD-series special synchronous turbomotors with 50 or 60 Hz AC three phase power supply are designed to operate pumps, compressors, gas pressurizers, air blowers and other fast-running devices.
Embodiment IM 7211
Cooling system motors below 8,000 kW air cooling, closed- or open-loop
10,000 kW Motors - air cooling, closed-loop
motors with closed-loop ventilation have integrated air coolers operated on fresh or sea water
in motors with open-loop ventilation, heated air is discharged through louvers in the stator casing
Cooling method closed-loop ventilation ICW37A71 open-loop ventilation IC31
Excitation system from digital thyristor excitation systems STSN or VTE10 315-series analog thyristor exciters (on request)
Start direct start from full mains voltage or reactance start, depending on the value of flywheel moments of driven equipment. Frequecny starts from thyristor frequency converters (thyristor starter) are possible - as agreed upon with the manufacturer
Protection level closed-loop ventilation I44 open-loop ventilation I22
Rated operating conditions S1
Manufactured in compliance with GOST R 52776-2007 and customers specific technical requirements.
Delivery set includes: motor, exciter, electric heaters for motors in tropical versions, foundation fastenings, mounting equipment, spare parts for exciter and motor, and operation documents.
Type of motor Capacity, kW Voltage, V Rotation speed, rpm Efficiency, % Weight, Kg
50 Hz
STD-1000-2 4 1000 10000 3000 95.8 6980
STD-1250-2 4 1250 11000 3000 96.3 7580
STD-1600-2 4 1600 6000 3000 96.6 7980
STD-1600-2 4 1750 6300 3000 96.4 7980
STD-1600-2 4 1600 6600 3000 96.4 7980
STD-1600-2 4 1600 11000 3000 96.5 7980
STD-1600-2 4 1600 10000 3000 96.4 7980
STD-3150-2 4 3150 11000 3000 96.7 12300
STD-4000-2 3 4000 6600 3000 97.0 14700
STD-4000-2 3 4000 11000 3000 96.9 14700
STD-10000-2 3 10000 11000 3000 97.7 29700
STD - XXXX - 2 3
category of location
climatic version
number of poles
capacity, kW
three phase synchronous motor
32
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
Type of motorCapacity,
kWVoltage, V Rotation speed, rpm Efficiency, % Weight, Kg
60 Hz
STD-800-3600 4 800 6000 3600 95.3 5130
STD-1000-3600 NF4 1000 10000 3600 95.0 5600
STD-1600-3600 4 1600 6000 3600 96.6 7580
STD-1600-3600 4 1600 10000 3600 96.2 7580
STD-2500-3600 4 2500 10000 3600 96.7 11100
STD-3150-3600Z NF4 3150 6000 3600 96.6 12285
STD-10000-3600 NF4 10000 6000 3600 97.5 26800
STD - XXXX - 3600 R (Z) (NF) 4
category of location
climatic version
R-open-loop ventilation, Z-closed-loop ventilation
rotation speed, rpm
capacity, kW
three phase synchronous motor
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
33
6.4. STDP-series motors, explosion proof
STDP-series synchronous turbomotors with the capacity of 1,250...12,500 kW with 50 Hz AC three phase power supply are designed to operate pumps, compressors, gas pressurizers, air blowers and other fast-running devices in explosion dangerous rooms of all classes (except for explosion dangerous areas of outside installations of class V-IG).
Embodiment IM 7211
Cooling system air cooling, closed-loop
10,000 kW Motors - air cooling, closed-loop
air is cooled with two sections of integrated air coolers operated on fresh or sea water
In motors with open-loop ventilation, heated air is discharged through louvers in the stator casing
Cooling method ICW37A71
Excitation system from brushless exciters of BVUP series
Start direct start from full mains voltage or reactance start, depending on the value of flywheel moments of driven equipment
Protection level I44
Explosion protection type and level IExpxIIT5X
Rated operating conditions S1
Manufactured in compliance with GOST R 52776-2007 and customers specific technical requirements.
Delivery set includes: motor, brushless excitation of BVUP series, thermal control sensors, switch of type DN 2.5, resistance level control unit BKS-3I, foundation fastenings, mounting equipment, spare parts to the motor, operation documents. On customers request, the motor can be equipped with excitation control cabinet, soft starter SSM-HV and frequency converter HV-VFD.
Type of motorCapacity,
kWVoltage, V Rotation speed, rpm Efficiency, % Weight, Kg
STDP-1250-2 NF4 1250 6000 3000 96.5 7030
STDP-1250-2 NF4 1250 10000 3000 96.2 7030
STDP-1600-2 NF4 1600 6000 3000 96.7 7630
STDP-1600-2 NF4 1600 10000 3000 96.6 7630
STDP-2000-2 NF4 2000 6000 3000 96.9 8030
STDP-2000-2 NF4 2000 10000 3000 96.9 8030
STDP-2500-2 NF4 2500 6000 3000 96.8 11150
STDP-2500-2 NF4 2500 10000 3000 96.6 11150
STDP-3150-2 NF4 3150 6000 3000 97.1 12350
STDP-3150-2 NF4 3150 10000 3000 96.8 12350
STDP-4000-2 NF4 4000 6000 3000 97.2 12970
STDP-4000-2 NF4 4000 10000 3000 96.9 12970
STDP-5000-2 NF4 5000 6000 3000 97.3 14750
STDP-5000-2 NF4 5000 10000 3000 97.2 14750
STDP-6300-2 NF4 6300 6000 3000 97.4 21600
STDP-6300-2 NF4 6300 10000 3000 97.4 21600
STDP-6300-2B NF4 6300 6000 3000 97.4 21950
STDP-6300-2B NF4 6300 10000 3000 97.4 21750
STDP-8000-2 NF4 8000 6000 3000 97.6 23000
STDP-8000-2 NF4 8000 10000 3000 97.6 23000
STDP-8000-2B NF4 8000 6000 3000 97.6 22800
STDP-8000-2B NF4 8000 10000 3000 97.6 23000
STDP-10000-2 NF4 10000 6000 3000 97.7 27000
STDP-10000-2 NF4 10000 10000 3000 97.6 26500
STDP-12500-2 NF4 12500 6000 3000 97.7 29500
STDP-12500-2 NF4 12500 10000 3000 97.7 28900
34
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
STDP - XXXX - 2 B NF 4category of location
climatic version
with side outputs
number of poles
capacity, kW
three phase synchronous motor, ventilated
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
35
6.5. SDG2 motor to operate gas pressurizers
SDG2 synchronous turbomotor with 50 or 60 Hz AC three phase power supply is designed for driving natural gas pressurizer EGPU at gas compressor plants.
Embodiment IM 7311
Cooling system air cooling, open-loop, with fans on shaft and additional axial fan installed on casing
Cooling method IC31
Excitation system from digital thyristor excitation systems STSN or VTE630/150T-series analog thyristor exciters (on request)direct, reactance-free asynchronous starts from full mains voltage are possible
Protection level I44
Rated operating conditions S1
Manufactured in compliance with GOST R 52776-2007 and customers specific technical requirements.
Delivery set includes: motor, exciter, foundation fastenings, mounting equipment, spare parts exciter and motor operation documents. On customers request, the motor can be equipped with soft starter SSM-HV and frequency converter HV-VFD.
Type of motorCapacity,
kWVoltage, V cos Rotation speed, rpm
Efficiency, %
Weight, Kg
SDG2-12500-2R NF3.1 12500 10000 0,9 3000 97.8 36000
SDG2 - 12500 - 2 NF 3.1
category of location
climatic version
open-loop ventilation
number of poles
capacity, kW
two-pole synchronous motor to operate gas pressurizer
36
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
6.6. RVSD frequency-regulated, explosion proof synchronous motor with 14,000 kW capacity
RVSD-14000-2R Nf4 electric motor with open loop type ventilation is a part of frequency regulated electric drive feeding from the thyristor frequency converter. It is designed to drive centrifugal mechanisms in explosion hazard zones of the 1st and 2nd class under Russian GOST 51330.9. 50 or 60 Hz AC three phase power supply.
Electric motor of this type can be used at pumping plants of oil-trunk pipelines or compressor plants at gas pipe lines instead of gas-turbine motors (as an alternative to gas turbine motors with lower efficiency).
The particular feature of RVSD-14000-2R Nf4 is than it is possible to regulate Rotation speed from 50 to 105 % (1,500-3,150 rpm), that allows supporting the required pressure in the oil pipeline and excluding excess demand energy.
Embodiment IM 7011
Cooling system air cooling, open-loop
Cooling method IC31
Excitation system from asynchronous brushless exciter with digital control system integrated in the converter
Start direct start from full mains voltage or reactance start, depending on the value of flywheel moments of driven equipment
Protection level IP44
Explosion protection type and level IExpxIIT5X. Purging and maintenance of differential static pressureinside the motor should be effected with a pressurizer fan installed in the air treatment unit
Rated operating conditions S1
On customers request, the motor can be equipped with frequency converter HV-VFD.
Manufactured in compliance with GOST R 52776-2007 and customers specific technical requirements.
A pressurizer fan, an air cleaning unit and a thyristor frequency converter are not included in the delivery set.
Type of motorRated capacity,
kWRated voltage, V
Synchronous rotation speed, rpm
cos Efficiency,
%Weight, Kg
RVSD-14000-2R NF4 14000 6000 1500...3150 0.9 97.7 34400
RVSD - 14000 - 2 NF 4
category of location
climatic version
open-loop ventilation
number of poles
capacity, kW
frequency-regulated, explosion proof synchronous motor
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
37
6.7. TDS motors with 20,000 and 31,500 kW capacities
TDS turbo-motors with 50 Hz AC power supply are designed to operate high-pressure compressors at metallurgical factories.
Embodiment IM 7321
Cooling system air-cooling, closed loop, with water air coolers
Cooling method ICW37A71
Excitation system from digital thyristor excitation systems STSN
Motor start frequency-regulated, from thyristor converter
Protection level IP44
Rated operating conditions S1
On customers request, the motor can be equipped with soft starter SSM-HV and frequency converter HV-VFD.
Manufactured in compliance with GOST R 52776-2007.
Delivery set includes: motor, exciter, starter, foundation fastenings, mounting equipment, spare parts to exciter and motor, and operation documents.
Type of motor Capacity, kW Voltage, V Rotation speed, rpm Efficiency, % Weight, Kg
TDS-20000-2 NF4 20000 10000 3000 97.6 57300
TDS-31500-2 NF4 31500 10000 3000 97.5 82900
Note: weight of motors does not include weight of exciters.
TDS - XXXXX - 2 NF 4
category of location
climatic version
number of poles
capacity, kW
synchronous turbomotor
38
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
7. SALIENT POLE SYNCHRONOUS MOTORS
7.1. SDK2- and DSK-series compressor motors
SDK2- and DSK-series synchronous compressor motors with 50 or 60 Hz AC three phase power supply are designed to operate piston compressors and are used in oil refining, metallurgical, machinery and other industries.
Embodiment IM 5710 console-type motors IM 7111 - SDK2 17 39 12F NF4
Cooling method IC01
Excitation system from digital thyristor excitation systems STSN or VTE10-315-series analog thyristor exciters (on request)
Protection level IP10
Rated operating conditions S1
On customers request, the motor can be equipped with soft starter SSM-HV, frequency converter HV-VFD.
Manufactured in compliance with GOST R 52776-2007, GOST 18200 and customers specific technical requirements.
Delivery set includes: motor, thyristor exciter, thermal control sensors, foundation fastenings, device for installation and removal of rotor, spare parts and operation documents.
Type of motorCapacity,
kWVoltage, V Rotation speed, rpm Efficiency, % Weight, Kg
SDK2-16-24-12 NF4 315 6000 500 92.3 2460
SDK2-16-24-12 NF4 315 10000 500 91.9 2470
SDK2-16-29-12 4 315 3000 500 92.7 2750
SDK2-16-29-12 4 315 6000 500 92.7 2750
SDK2-16-29-14 NF4 (4) * 320 3000 514 93.0 3130
SDK2-16-29-14 NF4 (4) * 320 6000 514 93.0 3130
SDK2-16-29-12 4 * 400 6000 600 93.1 2750
SDK2-16-24-10 NF4 400 6000 600 93.9 2550
SDK2-16-24-10 NF4 400 10000 600 93.9 2670
SDK2-16-24-10 4 400 6000 600 93.5 2560
SDK2-16-29-12F NF4 400 6000 500 94.0 4100
SDK2-17-26-16 NF4 500 6000 375 93.0 3900
SDK2-16-36-12 NF4 500 6000 500 93.7 3250
SDK2-17-26-12 NF4 630 3000 500 93.7 3600
SDK2-17-26-12 NF4 630 6000 500 94.5 3600
SDK2-17-26-12 NF4 630 10000 500 94.5 3640
SDK2-17-26-12 4 630 3000 500 94.1 3550
SDK2-17-26-12 4 630 6000 500 94.1 3550
SDK2-17-26-12 4 630 6600 500 94.1 3550
SDK2-17-29-14 NF4 (4) * 630 3000 514 94.3 4030
SDK2-17-29-14 NF4 (4) * 630 6000 514 94.3 4030
SDK2-16-44-10 NF4 630 10000 600 95.0 3780
SDK2-16-44-10 4 710 6000 600 95.3 3800
SDK2-16-44-10 NF4 800 6000 600 96.0 3770
SDK2-17-39-12F NF4 1000 6000 500 95.0 5930
SDK2-17-39-12F NF4 1000 10000 500 94.0 5550
* 60 Hz motor
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
39
SDK 2 17 (16) - XX - YY F (C) NF () 4
category of location
climatic version
C-console version (no shaft),F - one support version (flange)
number of poles
stator core size, cm
size designation
series
synchronous compressor motor
Type of motorCapacity,
kWVoltage, V Rotation speed, rpm Efficiency, % Weight, Kg
DSK 173/16-16 NF4 315 3000 375 92.0 3220
DSK-315-500-6 NF4 315 6000 500 92.0 2460
DSK-315-500-10 NF4 315 10000 500 92.0 2410
DSK-400-600-6 NF4 400 6000 600 94.0 2544
DSK-400-600-10 NF4 400 10000 600 95.0 2630
DSK-630-500-6 NF4 630 6000 500 94.5 3400
DSK-630-500-10 NF4 630 10000 500 94.5 3420
DSK-710-600-6 NF4 (4) 710 6000 600 95.3 3854
DSK - XXX - YYY - 6 (10) () NF () 4
category of location
climatic version
modification index
voltage, kV
rotation speed, rpm
capacity, kW
synchronous compressor motor
40
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
7.2. SDKP2-series compressor explosion proof synchronous motors
SDKP2-series compressor explosion proof synchronous motors 50 or 60 HZ AC three phase with power supply are designed for operation in explosion dangerous areas for driving piston compressors and are used in oil refining, metallurgical, machine building and other industries.
Embodiment IM 5710
Cooling system open- or closed-loop ventilation
Cooling method closed-loop ventilation ICW37A81 open-loop ventilation ICW37A31
Excitation system from digital thyristor excitation systems STSN or VTE10-315-series analog thyristor exciters (on request)
Explosion protection type and level IExpxIIT5
Protection level IP44
Rated operating conditions S1
On customers request, the motor is equipped with exciter, soft starter SSM-HV, frequency converter HV-VFD. Manufactured in compliance with GOST R 52776-2007, GOST 18200 and customers specific technical requirements.
Delivery set includes: motor, air cooler and blowdown valve (for closed-loop ventilation), pressure switch sensors, thermal control sensors, device for rotor installation and removal, foundation fastenings, flanges (for closed-loop ventilation), spare parts, and operation documents
Type of motorCapacity,
kWVoltage, V Rotation speed, rpm
Efficiency, %
Ventilation cycleWeight,
Kg
SDKP2-16-24-12 NF4 315 6000 500 92.2 closed-loop 3700
SDKP2-16-24-12 NF4 315 6000 500 92.2 open-loop 3240
SDKP2-16-24-12 NF4 315 10000 500 91.9 open-loop 3500
SDKP2-16-29-12 NF4 400 6000 500 93.0 closed-loop 4000
SDKP2-16-29-12 NF4 400 6000 500 93.0 open-loop 3540
SDKP2-16-36-14 2* 400 6000 514 93.2 open-loop 4600
SDKP2-16-36-12 NF4 500 6000 500 93.7 closed-loop 4650
SDKP2-16-36-12 NF4 500 6000 500 93.7 open-loop 4190
SDKP2-16-29-10 NF4 500 6000 600 94.0 closed-loop 4000
SDKP2-16-29-10 NF4 500 6000 600 94.0 open-loop 3540
SDKP2-17-26-16 NF4 500 6000 375 93.6 closed-loop 5675
SDKP2-17-26-12 NF4 630 6000 500 94.0 closed-loop 5210
SDKP2-17-26-12 NF4 630 6000 500 94.0 open-loop 4740
SDKP2-17-26-12 NF4 630 10000 500 93.8 open-loop 4880
SDKP2-17-31-12 NF4 710 10000 500 94.3 open-loop 5830
SDKP2-17-31-12 NF4 800 6000 500 94.5 closed-loop 5650
SDKP2-17-31-12 NF4 800 6000 500 94.5 open-loop 5180
* 60 Hz motor
SDKP2 2 - 16 (17) - XX - YY NF () 2 (4)
category of location
climatic version
console design (w/o shaft)
number of poles
stator core size, cm
size designation
series
synchronous motor, ventilated, compressor motor
5, Moldavskaya Str., Moscow, 121467, Russia +7 (495) 411-77-57, [email protected], www.oilgassystems.com
41
7.3. SDN general purpose motors
SDN synchronous motors with 50 or 60 Hz AC three phase power supply are designed to operate pump drive motors, running in pumps station system and other mechanisms.
Embodiment IM 7311
Cooling system air cooling, open-loop self-ventilation
Cooling method IC01
Excitation system from brushless exciter with digital control system or from brushless asynchronous exciter with the possibility to control the rotation speed
Protection level IP10
R