2

PRINTING TECHNOLOGY & INNOVATION

DAYS FOR FLEXIBLE PACKAGING

SLEEVES AND ROLLERS FOR PRINTING & LAMINATION

Milan (Company

Headquarters), L’Aquila

(Italy), Atlanta (USA),

Barcelona (Spain), Sao

Paulo (Brazil), Timisoara

(Romania) and a new

factory in Pune (India), all

linked by an efficient world-

wide distribution system.

Headquarters

Milano

L’Aquila

Cabrera de Mar

Spagna Atlanta USA

Timisoara Romania

San Paolo

Brasile

Pune India

Rossini World

ROSSINI can offer the complete rubber roller, re-rubberize used

rubber rollers, rubberize steel bases supplied by Customers and also

take care of the aftersale service re-grinding the external surface.

• Steps as per Customer‘s requirements

• Parallel or crowned surfaces (PLC grinding machines)

• Rossini can make customized Design – (contact our Sales

Network)

oPressure roller in gravure printing

oTransfer roller lamination machines

oGuiding roller, Impression roller, dosing roller

oImpression roller in solventless lamination

machines, for hotmelt applications

oPressure roller in extrusion and sillicone

coating machines

RUBBER ROLLERS

STEEL BASES AND AIR MANDRELS

The special Fibreglass core of the sleeve is manufactured with extremely

low intereference value – internal diameter is very close to the air

mandrel‘s diameter that is used on the machine according to Rossini‘s

Patent and design.

The low intereference value guarantees perfect fitting on the user‘s

mandrel and proper run out tolerances

Different type of rubber coverings are available for diferrent applications.

Typically:

SPEEDWELL SLEEVES

ROSSINI TECHNOLOGY

COMBINE FIBER GLASS

AND CARBON FIBER TO

MANUFACTURE A SOLID

BUT FLEXIBLE SUPPORT

FOR THE SLEEVES

ROSSINI – Rubber Hardness Colour Code

Colour Rubber Hardness

70-74 Shore (A)

75-79 Shore (A)

80-84 Shore (A)

85-90 Shore (A)

Operator Side Motor Side

CARBO SLEEVE

The Core of EVERY

ROSSINI PRODUCT

100% Traceability in the Process

• Full production history of every product,

serial number and order specifics

encapsulated in the GFK base sleeve.

• GFK core sleeve has extremely low intereference

with a perfect fit on the mandrel

ROSSINI S.p.A. is UNI-EN-ISO 9001:2008

certified since 1995

ROSSINI

AIR FLEXO SLEEVES

Photoflex Sleeve

Everstat Sleeve

Thin A - Sleeve

Everglass Sleeve

Evergreen Sleeve

Starcoat Sleeve

EVERGREEN– Plate sleeve for water based inks

THIN A - Plate sleeve

The Thin A sleeve is made of special

reinforced fibreglass.

It is mainly used for the very first printing

repeat on the air mandrel and carrier

Hard coat sleeve with green polyurethane

surface.

Not conductive, therefore recommended for

printing with water based inks.

Standard supply with PU Slot - from 7 [mm]

thickness

STARCOAT – conductive sleeve with 3 years warranty

EVERSTAT – conductive plate sleeve

Sleeve covered with Anti-Static

Polyurethane for printing with

solvent-based inks

PU Slot standard and PU Ring

available upon request.

Top line product with special construction to provide

maximum dimensional stability on long term.

Standard supply with Special PU Protection Ring

with integrated slot.

PHOTOFLEX – for full tone printing

Rubber sleeve with a special antistatic

(conductive) polymer. Resistant against

Ethylacetate, Alcohol and MEK

High precision ground surface, suitable

for full tone printing, lacquering and laser

engraving.

Standard Hardness : 65 Shore D

(available in other hardness values for

the different printed substrates)

AIR CARRIER - Standard

Adapter Sleeve with carbon fiber

surface for standard designs with no

bouncing problems and speeds up to

350 m/min.

The Product is available as Side Air and

Flow Through configuration

CARBOBRIDGE – High Performance

Manufactured with High Modulus Carbon

Fibre, Aluminum flanges and a steel

protection ring with integrated slot.

Engineered to damper and reduce

bouncing and for high printing

speeds.

The product is available as Side Air and

Flow Through configuration

… sometimes it happens that the selection of the accessories is

underestimated while planning a relevant investment and here we would

like to remember that :

•A Low level Machine can improve the final production output in terms of

quality and productivity using the right accessories

• A Top Level Machine may suffer a lot of troubles using low quality level

accessories

ROSSINI KNOW-HOW & KNOW-WHY

THANK YOU FOR YOUR TIME