Complete Print & Finishing Solutions

pg. 5 pg. 9 pg. 15

EQUiPMENt Catalog

w w w.printfs.comw w w.printfs.comw w w.printfs.comw w w.printfs.com

www.printfs .com2

The PFS working showroom features new and used machinery and is available for live demonstrations. Please contact your sales professional today at (800) 398-5283 to schedule an appointment.

The PFS Service Team specializes in pre-press, press and bindery machinery. We off er local service, preventative maintenance programs, and 24-hour service.

Tel: (714) 238-1133 • (800) 398-5283Fax: (714) 238-1147

E-mail: sales@printfs.com

BINDERY, FINISHING & PAPER HANDLING

DIGITAL & OFFSET

BINDING& LAMINATING

MAILING SOLUTIONS

PAPER SHREDDERS

PACKAGING & OFFICE PRODUCTS

NEW EQUIPMENT | USED EQUIPMENT | SERVICE | PARTS & SUPPLIES | ABOUT US | CONTACT

Print & Finishing Solutions (PFS) services California, the country, and the world with quality new and used machinery, installation and training, and post-sale support. We specialize in new and refurbished machinery, parts, supplies, and service for the print and graphics industry. PFS supports commercial printers and binderies of all sizes as well as digital printers and corporate and public in-plants.

Consumer Confi denceOrdway Corporation DBA Print & Finishing Solutions is a California Corporation and was incorporated in January of 2000, Certifi ed California Small Business (SBA / DVBE Services Number 36576) -link to seal image, DUNS 13-209-0197 Rated BA2, and we own and occupy a 13,500 sq. ft. modern commercial facility in Orange County.

As part of our on-going goal to provide the highest level of customer satisfaction, PFS is a proud member of both the local chapter of the Better Business Bureau and the BBBOnline program, dedicated to promoting trust and confi dence on the Internet. Through the online program, customers can access the current BBB database to view the complaint history of businesses and check that a business has met all of the stringent BBB membership standards.

ShowroomsWithin our facility, PFS off ers two demonstration centers catering to both commercial off set / binder and digital solutions. The Commercial Showroom features the latest machinery from RYBOI, Horizon, Challenge, Perfecta, and Preferred Pack. The Digital / On-Demand Showroom features the latest products from MGI, PSI, Rhin-O-Tuff , MBM, James Burn, DRYLAM, ExactBind and others.

Message from the PresidentThe goal of PFS is to be your “Business Partner in Print and Finishing.” If there is ever anything I can do to support your business, or if we should ever fall short of our promise to take care of you and your business properly, I would love to hear from you. Your comments and suggestions are always valued, and will continue to be a vital part of the strength of Print & Finishing Solutions.

Please feel free to call me direct anytime at (800) 398-5283, x230. Sincerely,

Robert Ordway Robert Ordway President, Ordway Corporation

PRINT & FINISHING SOLUTIONS

ESTABLISHED 2000

“taKiNg CaRE oF YoUR BUSiNESS iS oUR SPECialtY”

3(800) 398-5283

TABLE OF CONTENTS

Binding ............................................................................................ 21

Collating / Bookletmaking ....................................................... 14

Crease / Fold .................................................................................. 13

Digital..............................................................................................4-5

Drills .................................................................................................. 10

Folding ............................................................................................ 18

Laminating ..................................................................................... 19

Mailing ............................................................................................. 24

Number, Perf & Score ................................................................. 12

Padding ........................................................................................... 22

Paper Cutters ................................................................................. 11

Perfect Binding ............................................................................. 16

Pre-Press ............................................................................................6

Press ................................................................................................7-9

Punch ............................................................................................... 20

Shredders ....................................................................................... 26

Shrink Wrap ................................................................................... 23

Stock Carts ..................................................................................... 22

UV Coating ..................................................................................... 12

PRINT & FINISHING SOLUTIONS PRESENTS

Digital Printing | Automated Folding / Finishing | UV Coaters | Digital Creasing | Off set Presses | Mailing Solutions

The PFS team will be demonstrating the latest technology in Digital and Off set Printing with Automated

Finishing and for the fi rst time, Mailing Solutions. Each successful business is now forced to take a look

closer at labor costs and outsourcing costs, and we wish to be your partner in evaluating your needs. With

the absence of a west coast trade show for our industry, this is a great opportunity to see what you may have

missed at Graph Expo.

MANUFACTURER DEMONSTRATIONS, BREAKOUT SESSIONS, NETWORKING, FOOD AND REFRESHMENTS.

openhouse.printfs.com

www.printfs .com4

Dig

ital

CVJ-30 Series

Vivid Full Color Printing, white white and metallics. Quickly cut after printing using fast drying inks. Continuous Print and Crop mark recognition. Ideal for labels, signs, banners, vehicle wraps and more. Available in 4 sizes, 60, 100, 130, and 160 cm

JFX Plus Series Always striving for the best, Mimaki has achieved significant productivity enhancements for its flatbed UV LED printer series JFX with up to 80 % higher speeds. The new JFX plus series features a standard post-curing unit that enables printing of up to 23.6 sqm/h. This is nearly twice as fast as previous models. A roll unit has been developed to boost efficiency and productivity when printing on roll fed substrates. In addition, Mimaki’s IMS* technology ensures the highest image quality exceeding your customers’ expectations.

UJV-160

From acrylic board, aluminum composite board, corrugated cardboard, pasteboard, PVC, synthetic paper to PET, print on the broadest range of substrates with just one single printer.UJV-160 employing UV LED curing technology offers highest productivity and expands your business opportunities.

5(800) 398-5283

JETvarnish 3D Digital Inkjet Spot UV Coater

MGI’s revolutionary JETvarnish® gives commercial printers an economical, 100% digital method for offline spot dimensional UV coating, a premium service that generates real bottom line profits. The JETvarnish runs at a speed of 0.5 m/second (approx 3,0000 20 x 29” sheets per hour), up to 200 lb cover (digital or offset prints, coated paper or plastic) and offers variable data capabilities via an optional RIP. Drop-on-demand (piezo) inkjet technology ensures precise registration and the integrated UV dryers allow for immediate handling. Applications include brochures, annual reports, book covers, luxury & standard packaging (including proofs/prototyping), direct mail and a host of others, at a cost drastically lower than offset or screen methods. The award-winning JETvarnish is ideal for large commercial operations with several offset and/or digital presses as well as package printers.

Meteor DP8700XL 4-Color Multi-Substrate Digital Press

The most versatile digital press in the industry, the award-winning Meteor DP8700XL® prints on the widest range of substrates (paper, plastics & envelopes) and on sheets ranging from 4 x 6” up to 13 x 47.” Experience exceptional productivity with an output of up to 4250 A4/letter sheets per hour, in four colors with full variable data and true laser-safe output. MGI’s no click charge model ensures maximum profitability for short and medium run jobs. With the addition of the EnvelopExpress, printers have a digital solution for 4-color envelope printing with continuous feed capabilities.

Dig

ital

www.printfs .com6

RIPs & Servers - Software - Scanning Devices - Proofi ng

Computer To Plate (CTP)

Mitsubishi Eco 1630IIIThe Eco 1630III is a completely automated, digital platesette-ing system. Versatile and cost-effi cient, it is designed to in-crease your CTP capabilitites for both black-and-white and spot-color application, while decreasing your chemistry con-sumption and cost.

The SDP-Eco 1630III uses up to two-thirds less processing chemistry than current analog and digital systems. It features a self-contained processor that operates with two new, ready-to-use chemistries for processing Silver DigiPlate™ paper on polyester plate materials.

Plate sizes range from 9” x 8-5/8” to 16-5/16” x 22-13/16”. The Eco 1630IIIR produces up to 2400 dpi and up to 175 lpi with output pro-duction of up to 81 plates per hour.

Mitsubishi DPX2The DPX2 Platesetting System is an internal drum device that images 175-line, perfectly registered, press-ready Silver DigiPlate® material directly from your desktop. The DPX2 Platesetter delivers processed, dried, pre-punched, press-ready plates quickly and effi ciently so you can compete for short-run, process color jobs. Plates are produced in under four minutes at 2,540 dpi.

Plate sizes ranging from 10 x 10” to 8.1 x 21.6”. The DPX2 produces up to 3,600 dpi and up to 175 lpi with automatic plate loading on an internal drum with Mitsubishi polyester plate material.

PRE-PRESS

The pre-press solution requires the proper computer hardware, software, scanning devices and proofi ng printers. PFS represents Xitron/Xenith, GregtagMacbeth, Epson, RYOBI and other manufactures to handle application and system requirements. Systems support is available directly through PFS.

7(800) 398-5283

3200 Series3200CD Single Color (Pictured)3200PFA Automatic Perfector

Second color print unit is available.

A3-Plus Size Portrait Format Printing PressesMax. Paper Size: 13.39 x 17.72”Max. Printing Speed: 10,000 sph

3302 Series3302C3302H Manual plate change3302HA Semi-automatic Plate Changer3302HA+PCS-F Semi-automatic Plate Changer & Printing Control Station

3302M/H/HA, the most popular 2-color press in the world is now available with semi-automatic plate loaders (HA) and remote (PCS-F) Printing Control System.

A3-Plus Size Portrait Format 2-Color Printing PressesMax. Paper Size: 13.39 x 17.72”Max. Printing Speed: 10,000 sph

3304 Series3304H Manual plate change3304HA Semi-automatic Plate Changer & Printing Control Station

RYOBI 3304HA is an A3-size, portrait-format 4-color offset press. It includes the RYOBI Super Dampener Continuous Dampening System to ensure a stable supply of dampening solution, as well as a spring-tension plate clamp system that readily accommodates both metal and polyester-based plates output from computer-to-plate systems. Also included with the 3304HA is the RYOBI semi-automatic plate changer, which makes changing plates significantly easier, and remote (PCS-F) Printing Control System.

A3-Plus Size Portrait Format 4-Color Printing PressesMax. Paper Size: 13.39 x 17.72”Max. Printing Speed: 10,000 sph

PRESS

www.printfs .com8

520GX SeriesThe RYOBI 520GX series offset presses are specially designed for diverse, short-run and long-run printing of catalogs, high-quality art, packages, envelopes, and postcards with enhanced productivity and superior quality.

The newly-developed GX series features a semi-automatic plate changer, pull side guide and impression pressure preset systems, a suction tape feeder board, automatic cleaning device, PCS-H printing control system, and program inking. Available option include ink volume setting software, printing density control system, fully automatic convertible perfecting device, and tower coater. The GX series can be configured for printing with UV inks; including LED, and UV coating applications.

A3-Plus Size 524GX 4-Color/525GX 5-Color/526GX 6-Color PressesAvailable with optional convertible perfecting deviceMax. Paper Size: 20.47 x 14.76”Max. Printing Speed: 15,000 sph

522GE/524GEThese presses include semi-automatic plate changers, which allows speedy and accurate plate changing.

The 524GE includes the RYOBI PCS-J printing control system and RYOBI Program Inking, which reduce color adjustment labor to realize short make-ready times.

A3-Plus Size 522GE 2-Color/524GE 4-Color PressesMax. Paper Size: 20.47 x 14.76”Max. Printing Speed: 11,000 sph

782/784The 784E and 784EP (Fully-Automated Convertible Perfecting Device) offer a wealth of advanced functions in a compact body (1/3 smaller than the traditional 750 series).

B2-Plus Sizes 4-Color Offset PressMax. Paper Size: 31 x 23.62”Max. Printing Speed: 15,000 sph

PRESS

9(800) 398-5283

920 SeriesThe 920 series offers full-sized performance with full-sized features. This press boasts a 19-roller inker, Ryobi-matic continuous dampering, semi-automatic plate loader, blanket washers, roller washers, the PCS-G Printing Control Console, program inking, ultrasonic double sheet detection, and much, much, more. All this with a 31 percent production cost saving over a traditional 40” press.

A1-Size 4 &5-Color Offset PressMax. Paper Size: 36.22 x 24.61”Max. Printing Speed: 16,200 sph

750 SeriesQuite possibly the world’s perfect printing press, the 750 Series provides unsurpassed print quality, reliability, and state-of-the-art automation. The 750 offers U/V and aqueous chambered anilox coating, full automation including all preset, plate loaders, closed loop spectrophotometry, ink volume setter software, double diameter impression and transfer cylinders, superior inking capabilities, and 31 point stock capabilities!

B2-Size Multi-Color Offset PressAvailable in 2-10 Color models including optional Fully Automatic Convertible Perfecting and CoatingMax. Paper Size: 29.5 x 23.6” (31 X 23.6” can be fed)Max. Printing Speed: 15,000 sph

1050 SeriesIn the flagship 42” RYOBI 1050 series, a new level of operability is achieved through advanced systems such as the RYOBI PQS, which enables inline printing quality control, and the RYOBI PCL-L dual-monitor printing control system. In addition, smooth linking with prepress and postpress lets you build the type of efficient digital workflow that helps boost your productivity.

B1-Size Multi-Color Offset PressAvailable in 4-6 Color modelsMax. Paper Size: 42.7 x 30.7”Max. Printing Speed: 16,000 sphMax. Paper Thickness: 39 point

PRESS

www.printfs .com10

EH-3C Three Spindle DrillThe hydraulic operated EH-3C has been the industry benchmark for three spindle paper drills for over 30-years.

2.5” Drilling Capacity13 Drill Bit Sizes (1/8 - 1/2”)Automatic Paper Chip RemovalMulti-Hole Drilling- up to 3 HolesFast and Easy Head AdjustmentAutomatic Drill Return

Since introducing the fi rst paper drilling machines in the 1930’s, Challenge has been producing the highest quality, longest lasting line of paper drills available. With a full line of drills from one to ten spindles, Challenge has the perfect drill for any application.

JF Single Spindle DrillElectric, manual foot pedal operated drill with auto-trip side guide for multi-hole applications.

2” Drilling Capacity13 Drill Bit Sizes (1/8 - 1/2”)Automatic Paper Chip RemovalAdjustable MarginsBuilt to Last

MS-10 Ten Spindle DrillHigh production drilling up to 10 holes in a single stroke. Designed for special applications and commercial binderies.

2.5” Drilling Capacity13 Standard Drill Bit Sizes (1/8 - 1/2”)9 Large Hole Drill Bit Sizes (9/16 - 1-5/8”)Multi-Hole Drilling- up to 10 HolesVariable Speed Stroke ControlMulti-Splined Drive Shaft

MS-5 Five Spindle DrillHydraulic operation makes the MS-5 ideal for most commercial applications including medical and automotive.

2.5” Drilling Capacity13 Drill Bit Sizes (1/8 - 1/2”)Automatic Paper Chip RemovalAdjustable Backguage and Side GuidesMulti-Hole Drilling- up to 5 HolesOptional Narrow Heads Available

Print & Finishing Solutions also carries a full line of light and medium duty, tabletop and fl oor-model paper drills from Lassco/Spinnit, Challenge, and MBM. Various economical models are designed for the offi ce, copy center, and print shop environments.

FMM-3 JO MBM-55

Lassco

4850-EP 5551-EP

Cutting Width: 18.5” 21.6”

Cutting Height: 3” 3.6”

Auto Clamp & Cut: Electric Hydraulic

Programmable: Yes Yes

Adj. Clamp Pressure: No Yes

Light Beam Safety: No Yes

Electric Programmable 4850-EP

Hydraulic Programmable 5551-EP

Triumph paper cutters are the most widely-distributed manual and electric/hydraulic guillotine cutters worldwide. These machines feature the latest in cutting automation for offi ce, digital, and commercial print and copy environments. Every model off ers the very best combination of features and aff ordability. Triumph cutters range in size from a 15” tabletop to a 28” fl oor-model.

DRil

lS / CUttERS

11(800) 398-5283

230 265 305

Cutting Width: 23” 26.5” 30.5”

Cutting Height: 3.25” 4” 4”

Auto Clamp & Cut: Hydraulic Hydraulic Hydraulic

Programmable: Yes Yes Yes

Adj. Clamp Pressure: Yes Yes Yes

Light Beam Safety: Yes Yes Yes

Air Table: N/A Yes Yes

Titan265

Champion305XG, XT

Challenge paper cutters are designed for high-volume commercial print and digital environments. Manufactured in the USA with proven quality for over 110 years. They range in size from 12” to 37”, and have various programmability options. Every Challenge paper cutter features hydraulic cutting and clamping, and is designed to last for many years.

76 92 115

Cutting Width: 29.9” 36.2” 45.3”

Cutting Height: 4.3” 4.7” 6.5”

Cycle Rate Per Min.: 50 50 45

Mechanical Knife: Yes Yes Yes

Programmable: Yes Yes Yes

Adj. Clamp Pressure: Yes Yes Yes

Light Beam Safety: Yes Yes Yes

Perfecta is the world leader in highly-automated commercial cutting and handling systems designed for 24/7 print, bindery, and converting customers. These German-designed and manufactured cutters are the most productive on the market today, featuring fl ywheel-activated cutting and hydraulic clamping systems. Perfecta cutters range in size from 30” to 88”. Available accessories and peripheral devices such as stack lifts, joggers (with or without counting scales), transfer tables, loaders, and unloaders, can make your operation up to 300% more effi cient with a single cutter.

CMT - 130The sturdy steel and cast-iron design of the CMT 130 ensures years of trouble-free operation. Hydraulic clamping and cutting action provides strength to cut through up to 2” (50.8mm) thick books without hesitation.

The CMT 130 can be confi gured as a hand-feed off -line trimmer for cost-eff ective trimming. The optional high-capacity feeder permits up to 36” / 914 cm of books to be stacked and automatically fed into the trimmer. The optional vertical stacker allows up to 24” / 609 cm of books to be delivered. When these two items are combined, this near-line trimming solution permits the perfect binder operator to also feed and collect product from the CMT 130 solution. The CMT 130 can also be confi gured for true in-line trimming by substituting the book pile feeder with our infeed conveyor and cooling elevator. A variety of conveyors are available to interface your perfect binder with the CMT 130.

CUttERS

www.printfs .com12

GW-6000 GW-8000 GW-12000

Speed: 6000 8000 12,000

Max Sheet Size: 18 x 18” 18 x 18” 18 x 18”

Numbering Positions: 10 100 100

Drive Type: Electronic Pneumatic Pneumatic

No. Job Memories: N/A 100 100

Graphic Whizard is the world’s leading manufacturer of numbering systems. Capable of producing 12,000 sheets an hour, and available in friction or horizontal air feed, there is a model appropriate for any job and budget. They can print up to 100 numbers per page, and the numbering heads are adjustable individually and can be rotated 360 degrees. All Graphic Whizard numbering machines can perf, score and slit during the numbering process. A wide variety of perfing and scoring wheels are available, including microperf.

GW-6000 GW-12000

CreaseMaster Series Impact Scoring Systems

Impact creasing evolved because of the growing digital markets, and the difficulty in finishing the digitally printed material. There are four models to choose from in our CreaseMaster series starting with the economically priced hand-feed “MF” and friction feed “PRO-F” to our “PLUS+” and “PLATINUM” units which utilize the “digital-friendly” horizontal air/suction feeders.

Numbering, Perfing, Scoring and UV Coating

CMP-MF CMP-PRO-F CMP-PLUS+ CMP-PLATINUM

Speed: 2000 2000 3600-4600 8000

Feed Type: Hand-Feed Friction Air Air

Controller: Digital Digital Digital Touch-Screen

Max Sheet Size: 18 x 25.5” 18 x 25.5” 18 x 25.5” 18 x 25.5”

Stock Weight: 12lb. – 18pt 12lb. – 18pt 12lb. – 18pt 12lb. – 18pt

VividCoater XDC Micro™

A low maintenance, ultra-violet cured coating system that produces a high quality finish to the printed sheet, producing richer and more vibrant colors on digitally or offset printed pieces. Less than 3’x 3’ and has a variable speed of up to 2700 sheets per hour, it can be easily moved through any standard door. Easy to operate and allows for variable coating thickness control and variable speed control. Features such as easy set handles, standard IR and wiper blade, and vacuum hold down ensure that this machine is user friendly, and quick to set up.

VividCoater XDC

A low maintenance, ultra violet cured coating system that produces a high quality finish to the printed sheet, offering a wide range of finish options, including matte to high gloss. Make printed products lively and brilliant with protection against friction and fading. The VividCoater produces virtually no Volatile Organic Compounds (VOC’s) and is considered to be environmentally friendly. Available with and without feeders and up to 23 x 29 inch wide sheets.

UV Coaters

NUMBER / PERF

CREaSE / Coat

13(800) 398-5283

DigiFold PRODigiFold is still the market leader and the product of choice for most digital printing professionals. In addition to this significant feature improvement, we have once again used state of the art technology to increase its speed. The productivity of the DigiFold Pro has been increased by a very creditable 20% and will now crease and fold at 6000 sheets per hour while retaining the accuracy demanded by users of previous DigiFold models. Yet again Morgana engineers have used innovative design and SmartScreen technology to produce what we are sure will be another “winner

Key Product FeaturesSmartScreen touch screen operation6000 sph0.015” (approx 150lb cover)*Alpha-numeric memoryPosiFeed feed systemHighly versatile 35.4” x 15” with optional extensionCrease & fold without cracking

AutoCrease 33 and 50 ProTraditional rotary scoring machines use circular blades that are in constant motion as the stock passes through them. This creates a ploughing action that actually cuts through the top fibres of the paper or card in order to create a score. Inevitably this weakens the paper and encourages cracking. In contrast, the Morgana AutoCreaser Pro 33 employs a unique creasing rule and matrix as illustrated overleaf, that eliminates tearing and, therefore, cracking.

Key Product Features7” SmartScreen touch screen Intuitive and easy to useFully automaticUp to 16 creases per sheetTakes stock up to 0.015” (approx 150lb cover)*Rule and matrix guaranteed for life8500 sheets per hourUnlimited alpha numeric memoryAdjustable crease depth & squarePerforating as standardCrease without cracking

Dig

ital CREaSE/FolD

MBM AeroCut Simple touch screen set-up with up to 80 job memory. Ultra accurate cutting with cross cut knife and 6 rotating slitting knives. Register mark reader to eliminate print wandering. Superb suction feeder for tough to feed digital stock.Matrix creasing with easy adjustable depth. Cut, crease, and perforate with touch screen operation. Settings are time saving and uncomplicated.High quality cutter, slitter, and creaser fulfills finishing for all types of cards.

www.printfs .com14

CollatiN

g/BooKlEtMaKiN

g

510 Series Collators / Feeders

C 510 CollatorAC 510 with air separationCF 510 with feeder functionACF 510 with air separation & feeder function

Collate off set / feed digital in one systemAir separation for coated / diffi cult stocks10 bins / 25 sheets (in feeder mode)Sheets sizes 4.75 x 8.25” - 12.6 x 17.75”Up to 4,400 collated sets/hrUp to 7,000 digital fed sheets/hr

System 70 Booklet Maker

BM 60 Bookletmaker104 SquareFold

Professional booklets & side/corner stapleHad-feed or in-line with C 510 collatorUp to 22 Sheets / 88 pagesSheets size 5.4 x 8.25” - 13.3 x 18”SquareFold (perfect bound look) bookletsUp to 1,800 sets/hr

System 200e Booklet Maker

Paper Size: 8.1 x 10.8” - 12.6 x 18” Book Thickness: up to 30 sheets / 120 pagesStaple Heads: 2 Programmable: Yes, up to 10 jobs Production Speed: up to 1,800 booklets/hr Professional booklet production made easy and aff ordable. On-line with your choice of collators / feeders or off -line for hand-fed applications.

System 300 / 300S Booklet MakerPaper Size: 4.7 x 8.2” - 12.6 x 18.5” Book Thickness: up to 25 sheets / 100 pagesStaple Heads: 2 or Stitch Heads: 2 Programmable: Yes, up to 10 jobs Production Speed: up to 2,400 booklets/hr

Professional booklet production designed for inplant and commercial / digital print production. In-line with your choice of collator / feeder or off -line for hand-fed applications.

* Pictured with optional 510 feeder and SquareFold

* Pictured with optional 510 feeder, CST crease & side trim module, and SquareFold

15(800) 398-5283

HOF-30 High-Speed Off -line Sheet FeederThe HOF-30 high-speed feeder provides production speed and fl exibility for digital print environments. It feeds pre-collated digital output at up to 27,000 sheets per hour and can be combined with Horizon SPF-20/20A or StitchLiner saddle stitching system. By adding a collating tower, the fi nishing system can eff ectively serve print shops that perform both off set and digital printing under one roof. A mark reader also enables the HOF-30 to handle personalized, variable sheet count documents with integrity and verifi cation. An optional cover feeder provides additional production fl exibility.

Feed Type: Air-Suction (Rotary Pulse Feeding)Paper Size: 7.87 x 10.82” up to 13.77 x 19.68”Production Speed: up to 27,000 sheets/hr

SpeedVAC-100The VAC-100 collator provides fl awless feeding on virtually any stock. The system is expandable from one to six towers, with the ability to run in both directions at full rated speed. All system controls are centralized on the simple but powerful icon-based touch-screen console.

Feed Type: Air-Suction (Rotary Pulse Feeding)Paper Size: 4.75 x 5.8” - 14 x 20”Production Speed: up to 10,000 sets/hr

SPF-200A/FC-200AAutomated Stitching/ Folding & Trimming

Paper Size: 4.7 x 7.1” - 14 x 20”Book Thickness: up to 24 sheets / 96 pagesProduction Speed: up to 4,500 booklets/hr

The Horizon SPF/FC-200A fully-automated combination stitcher/folder and face trimmer is equipped with a user-friendly 10.4” intelligent color touch-screen that provides advanced set-up automation and centralized control. The SPF/FC-200A features an integrated hand-marry station for increased fl exibility, and a built-in error eject tray which allows for non-stop production at speeds up to 4,500 booklets per hour.

StitchLiner 5500The StitchLiner bridges the production gap between existing fl at sheet collating / bookletmaking and conventional high-volume saddlestitching lines. Off set or digitally printed fl at-sheet signatures are fed from the SpeedVAC collator to produce true saddle stitched booklets with full bleed trimming, at speeds up to 11,000 (two-up) booklets per hour. Professionally fi nished booklets up to 200 pages are fully comparable with booklets produced by traditional saddle stitchers.

Paper Size: 5.6 x 8.2” - 13.7 x 19.6”Book Thickness: up to 50 Sheets / 200 pagesProduction Speed: up to 5,500 booklets/hr

CollatiN

g/BooKlEtMaKiN

g

www.printfs .com16

BQ-160

The Standard Horizon BQ-160 Single-clamp Perfect Binder is equipped with an intuitive, icon-based color touchscreen for fi ngertip adjustment of key parameters. This “intelligent automation” feature is built into all Horizon post-press products. With single-person operation, the BQ-160 can produce three popular types of binding: perfect binding, tape binding and pad binding – at speeds up to 180 cycles per hour with books up to 1.1” thick. The BQ-160 is specifi cally designed for cut sheet applications, and off ers very simple operation so any operator can easily produce professional quality books with minimal training. Other BQ-160 advantages include an electric book clamp, two-way notching, an effi cient paper dust vacuum system, nipper height and tilt adjustment from the touchscreen, and a dynamic nipper table for auto book sizing.

Binding Thickness: up to 1.1”Cycle Speed: up to 180 books/hrBook Dimensions: 5.8 x 4.1” - 11.8 x 15.7”Spine Preparation: Roughing & Notching

BQ-270C

The BQ-270C features include an intelligent touch-screen control console, newly-developed adhesive application and side-gluing system, automatic air-suction cover feeding with in-line scoring, job programming, and same-location loading and unloading for easier single-person operation.

The BQ-270C, with its state-of-the-art design, compact confi guration, and full automation, is positioned to meet the demands of the short-run, print-on-demand book market.

Binding Thickness: up to 2”Cycle Speed: up to 500 books/hrBook Dimensions: 5.9 x 4.2” - 12.5 x 12.5”Spine Preparation: Roughing, Notching & Milling

BQ-470The BQ-470 is a heavy-duty four clamp fully-automated perfect binder that combines superior quality with an icon-based touch screen control. This binder features a customer-replaceable glue tank unit for both EVA and PUR adhesives (option).

Binding Thickness: up to 2.5”Cycle Speed: up to 1,350 books/hrBook Dimensions: 4.2 x 5.7” - 12.5 x 12.5”

PERFECt BiN

DiN

g

17(800) 398-5283

CABS 5000

The CABS 5000 is a commercial- duty 15-clamp binding system that employs a digital caliper, color touch screens, and advanced automation to achieve ultra-fast makeready and changeovers usually under 10 minutes. The system can be expanded from 6 to 36 gathering stations, and the HT-100 in-line three-knife trimmer trims up to 4”. Quick set-up fl exibility is now available in the range of 5,000 top-quality books per hour.

Binding Thickness: up to 2”Cycle Speed: up to 5,200 books/hrBook Dimensions: 5.8 x 4.2” - 13.7 x 10.2”

The Standard Horizon HT-80 is an in-line or off -line three-knife trimmer that produces precise, clean cuts with no rough edges at speeds up to 1,000 cycles per hour. The LCD display console steps the operator through set-up and changeover, and provides continuous updates on system status. The HT-80 will accept a variable lift size up to 2” thick. Changeovers are accomplished in under 10 minutes, without the need for any tools, and all adjustments are external to the knife area for added safety. An advanced interlock system provides enhanced operator safety.

Cycle Speed: up to 1,000 books/hr

HT 30 The HT-30 Three-side Trimmer features automated job set-ups and quick changeovers to meet the requirements of the short run print-on-demand book market. The HT-30 operates off -line to trim perfect bound books at speeds up to 200 cycles per hour. A touch screen operator console allows all set-ups to be performed with full automation. Precision stepper motors accurately position all guides and clamps to insure professional quality cutting. Up to 12 inches of books can be loaded into the in-feed hopper, where books are automatically fed for unattended operation. The HT-30 features automated job set-ups and quick changeovers, with the ability to store up to 40 diff erent book jobs in memory.

Cycle Speed: up to 200 books/hr

HT 80

PERFECt BiN

DiN

g

www.printfs .com18

714XLT 870 352SA 714XA

Paper Size Min.: 3 x 5” 4 x 6” 3.4 x 3.4” 3 x 5”

Paper Size Max: 14 x 20” 14 x 20” 13.4 x 18” 14 x 20”

Speed Per Hr.: 35,000 30,000 35,000 35,000

Stock Weight: 13lb-90lb 9lb-65lb 13lb-90lb 13lb-90lb

Auto Set-up: No No Yes Yes

8 page Available: Yes No No Yes

We have a large selection of table top and fl oor model folders, inserters and tabbers, from Horizon, Challenge, MBM, Formax and Baumfolder. With products for the offi ce, to in-plants and commercial print shops, PFS has the perfect paper folder for your needs.

352SA870 714XA714XLT

AFC-564A AFC-744AKT

The AFC-564A computer controlled cross-folder is precision engineered for quality folding in minimum space. The large icon-based touch-screen provides a simple, powerful user interface. The AFC-564A combines Horizon’s advanced folding technology with simple operation and superior folding quality that can be enhanced with Horizon’s unique i2i network fl ow system. 13 fold patterns – including 8-page cross fold, letter fold, and direct mail fold – are set by selecting fold pattern and inputting sheet size on the large LCD touch-screen. 10 diff erent sections are set automatically by stepper motors.

Min. Sheet Size: 5.1 x 5.9” Max. Sheet Size: 22 x 33.5” Maximum Pile Height: 25.5”

The large and interactive icon-based touch-screen on the AFC-564A and AFC-744AKT were designed for fully

automated set-up.

The AFC-744AKT B1-format folder is the newest in Horizon’s expanding line-up of quality-engineered folders that combines simple operation, quick changeover, high production speed, and superior fold quality. Compatible with the Horizon i2i network fl ow system allows you to remotely monitor work in progress, productivity, set-up conditions, and other key production information. 14 fold patterns are available, including 16-page cross-fold, 8-page cross-fold, and direct mail fold. The folder automatically calculates and then sets each of eight variable sub-stations, including the feed guide, register guide, 1st to 4th buckles, and two knife stoppers.

Min. Sheet Size: 8.3 x 8.3” Max. Sheet Size: 29.1 x 43.3” Maximum Pile Height: 29.5”

FolDiN

g

19(800) 398-5283

Fujipla ALM 3220 Automatically feed, laminate and trim Digital Prints virtually unattended, freeing you to work on other profitable tasks.

Adjusts to different size documents up to 12” x 18” and can trim with or without margins.

All ALM film is designed to work with all digital devices and availably in 1.5, 3, or 5mil Gloss or Matte and 1.2 single side nylon.

laMiN

atiN

g

PL SeriesHigh performance for a varity of commercial applications.

3/4” Core roll laminator that can laminate films from 1.2 mil to 15 mil in thickness and mount up to 1/4” foamboad. Available in 12”, 27” ,38” and 44” and designed for the on demand print market, copy shop, and sign banner shop

LamRite 2700 This 27” Roll Laminator delivers superior results at laminating speeds up to 8.8 ft / minute and can be used with films up to 10 mil thick.

Simple to operate and perfect for Schools, Copy Shops and In-Plant centers.

Auto shut off and front shield sensors provide additional safety assurance. All metal construction, UL listing and a one year warranty

PFS offers a full line of small and large format laminatorsfrom Ledco, Foliant, D&K, GBC, DryLam and Royal Sovereign

HS 30 High-Speed Laminators designed for high-speed, cost-effective lamination performance.

HS Feeder Automatic feeder provides increased production over hand-feeding in high volume production runs.

HS Automatic CutterA fiber optic sensor precisely activates the shearing blade on the leading and trailing edges of each sheet.

 400 SeriesDesigned for the “Digital Print On Demand” market, machines in this category are specially constructed for lamination of digital outputs. Standard paper sizes from 8-1/2” x 11” up to 14.9” x 25.9” making them suitable for lamination of outputs from popular digital printers.

500 SeriesAre mostly fully automatic lines with high speeds for heavy duty workload. The 500 series handles a 20.4” x 29.1” sheet size.

700 Series Very fast fully automatic machines, built for heavy workloads and non-stop production. The 760 series takes sheet sizes up to 29.9” x 43.3”

The new affordable Foliant Series™ laminators provide the perfect solution for high quality single side lamination of book covers, brochures, magazine covers, and more.

www.printfs .com20

Flexi-Punch (Manual or Electric) Medium Duty 12” PunchPunches up to 20 sheets / cycleInterchangeable diesAvailable binding modules

Comb - Wire - Coil Dies Available

HD7100 PunchHeavy Duty 14” PunchPunches up to 40 sheets / cycleInterchangeable diesAvailable binding modulesMade in the USA

Comb - Wire - Coil - 3 Hole - Custom Dies Available

Onyx 3-in1 PPS (Pick-Punch-Stack)

HD7700 Heavy Duty 14” Punch (up to 55 sheets / cycle)PAL-M (manual) or PAL-14 (automated) Pick moduleAPES-14 Automated Paper Ejector / Stacker module Punch at the production of an automated system for lessthan half the cost. Punch and modules available as a system or separatelyMade in the USA

Finish@Coil E1

Automatic coil inserter & electric crimperFoot pedal operation & binds up to 50mm

Flexi Closer“Smart Detect System” wire closer that

automatically detects and closes diff erentsized wires with a simple press of a button.

Casematic H32 ProProduce professional tailor-made cases

up to 13˝ x 13˝ in a matter of minutes

“Rhin-O-Roll” HD4170Pictured with optional KF50 crimper

Coil inserter with 12” dual powered rollers, adjustable lower roller & foot pedal operation

Made in the USA

HD8000 (14”) - HC8024 (24”)

Closes wire bound books from 3/16” to 1-1/4”All metal construction

Made in the USA

BooXTer DuoBind professional books, reports, or

photo albums in seconds.

PUNCHiN

g / BiN

DiN

g

PFS Off ers the most complete line of professional book binding solutions

21(800) 398-5283

DocuPunchAccurate mid-volume automatic punching on-demand. Punches preprinted, collated documents directly from your copier or printer (including mixed stocks from 16 lb. bond to 110 lb. index). Also punches tabs pre-collated into the finished sets.

Designed with the On-Demand market in mind... setup time in less than a minute, die changes in seconds and hands free operation so your operator is free to perform other tasks.

Available is a wide range of die patterns including: double loop wire, plastic coil, plastic comb, VeloBind®, loose leaf styles, and more.

Punches up to 30,000 sheets/hrSheet size: 5.5 x 5.5” - 13 x 12”Book Dimensions: 5.8 x 4.2” - 13.7 x 10.2”

AlphaDocHigh-speed automatic punching on-demand. Punches preprinted, collated documents directly from your copier or printer (including mixed stocks from 16 lb. bond to 110 lb. index). Also punches tabs pre-collated into the finished sets.

Available is a wide range of die patterns including: double loop wire, plastic coil, plastic comb, VeloBind®, loose leaf styles, and more.

Punches up to 48,000 sheets/hrSheet size: 5.5 x 5.5” - 13 x 13”

EX380 & EX610The Lhermite® EX Series of automatic punches is an absolute must for any bindery that demands precision punching at very high output speeds and will punch pre-printed collated documents with or without mixed stocks. The EX series is capable of punching up to one million sheets of paper in just one 8-hour shift. An optional attachment allows you to punch tabs collated into the finished sets. The EX series is available with a continuous conveyor delivery or high pile stacking delivery.

Available is a wide range of die patterns including: double loop wire, plastic coil, plastic comb, VeloBind®, loose leaf styles, and more.

EX380 EX610Punches up to: 125,000 sheets/hr 125,000 sheets/hr

Sheet size: 4.25 x 3.75” - 15 x 15” 4.25 x 3.75” - 24 x 20.75”

BiN

DiN

g

www.printfs .com22

Wire-O® BindA highly successful companion to the AlphaDoc® and DocuPunch® punching machines, the Wire-O® Bind is a high speed, instantly adjustable binding machine with a patented closing unit that positions and feeds the book without the need for stops or paper guides. Binds books 1/4” to 1-1/4” at a rate up to 1000 books per hour.

CB30QS Automatic InserterAutomatically inserts, cuts, and crimps both ends of plastic spiral element from 8mm to 18mm (1/4” to 5/8”) into pre-punched documents. Binding edge from 4-1/2” up to 12”. Cycling speeds up to 1200 per hour and practical output of 250-500 books per hour. Hands-free foot pedal allows two-handed document placement.

Paddy-Wagon

Turn your padding operation from messy inconvenience to a high-capacity profi t center with simple 1-2-3 operation:(1) Tilt & Load (2) Clamp (3) Tilt & Pad

Sample Capacity 15,000 8-1/2 x 11” SheetsPortableHeavy-Duty CastersWelded Tubular Steel Construction

Pack-Rak

Makes every job easy for printers, mail rooms, copy shops, and binderies. Holds 11 x 17” Stock500 lb Total Capacity12 Shelves: 4 Fixed, 8 AdjustablePortableHeavy-duty Industrial CastersSide Handles Solid Construction

BiN

DiN

g

23(800) 398-5283

1519ECMCThis compact L’Sealer with Magnetic Hold down and power discharge conveyor with attached Tunnel is only 74 inches in total length. Featuring new “Band Seal” Technology - Will seal PVC or Polyolofi n Shrink Films with no smoke or residue. Tunnel features Live Roller ROD Conveyor with fully Re-Circulating Air Chamber, AC variable Speed Conveyor, 0 to 60 FPM, and Automatic Cool Down with Shut Off . A great machine for low to medium production speeds of 8 to 12 packages per minute. Available in 110 volts or 220 volts.

Seal Dimension: 15 x 19”Tunnel Dimension: 20 x 16 x 6”Cycle Speed: 12 pkgs. per Minute

PP1622MK-Combo

This fully adjustable combination L’Sealer with attached Shrink Tunnel includes the latest “Micro-Knife” Technology - No more seal wires to replace. The L’Sealer is mounted on linear bearings, and easily moves forward or backward to center product into Tunnel. Discharge conveyor on L’Sealer also adjusts up or down. Shrink Tunnel features a fully Re-Circulating Air Chamber with Live Roller ROD Conveyor. Convenient crank handle on Tunnel allows operator to move tunnel up or down to match sealer conveyor height. Uni-body frame makes this unit easy to move around.

Seal Dimension: 16 x 22”Tunnel Dimension: 28 x 18 x 8”Cycle Speed: 15 pkgs. per Minute

TC5600 Automatic ComboNew design for 2012 - Combination Fully Automatic L’ Sealer and tunnel built on same frame”, “APA” Automatic Product Adjustment with features like motorized adjustment of inverting triangle,infeed, and center seal (no more crank handles to turn because of a fully motorized adjustment), single piece seal blade, easy load fi lm cradle, fully enclosed safety doors, easy access control panel, self diagnosing Delta PLC, Delta 7” Color Touch Screen with 12 program memory, “Vertical Seal Head Design” for packages up to 8” high, Variable speed drive (0 to 110 FPM), Speeds to 40 PPM.

SHRiN

K WRaP

www.printfs .com24

SI4200/4400

The Secap SI4400 is a robust, high-speed production folding and inserting system that handles up to 4,000 pieces per hour. Ideal for processing the insertion and sealing of letters, leafl ets, inserts, reply cards, return envelopes, pre-folded and unfolded enclosures for short production runs, mailing fulfi llment houses, in-plant operations and mailrooms. The SI4400 is available in several confi gurations and can feature up to 4-sheet feeders and up to 2-insertion feeders, making even the most demanding mailing job manageable.

Throughput up to 4,000 pieces per hourUp to 20 programmable jobs to simplify routine mailingsUser-friendly graphical interface LCD control panelSwiftStart functionality which detects trays and envelopes and confi gures the

machine automaticallyInternal counter, envelope sealer, automatic double detection, batching, trial

key for test envelopes, automatic stop and multiple sheet insertionOptional OMR capabilities allows the integration of simple intelligence into mail

processing applications

®

SI5400

The Secap SI5400 is Secap’s premier tabletop production inserting system, designed to meet the demands of mid to high volume folding and inserting applications. Advanced features and reliability keep your mailing operations running effi ciently and smoothly while maintaining high productivity.

The SI5400 provides the most advanced features and capabilities within our tabletop inserter line. The system utilizes a next generation user interface that is simple to read with a full color and intuitive LCD display and can memorize up to 24 diff erent job settings, enabling users to eff ortlessly switch applications and program repeat mailings for simple integration into the workfl ow process. The main feeder tower holds up to four interchangeable feeders and features a high capacity envelope feeder. The system can be confi gured with two optional high capacity sheet feeders with two trays each that will hold up to 1,000 sheets each. An optional envelope power stacker can be added to assist with handling the high output.

High productivity - will process up to 5,400 pieces per hourSignifi cantly faster for complex jobs, especially when feeding multiple sheets

from the same trayClear Deck function makes it convenient and easy to clear the paper path

T2000

The T-2000 tabber is a heavy duty tabletop tabber designed to run off -line or in-line with fi xed head desktop printers or production mail tables. Off ers superior material handling with precise tab placement on a variety of media sizes and thicknesses.

Applies one, two or three tabs in one passProduction speeds up to 20,000 pieces per hour for single tabs and up to 15,000

pieces for double tabsSuperior material handling with precision registration transport guidesPrecise tab placement on a variety of media size & thicknessEasy set-up with simple to use electronic control panelApplies a range of adhesive material including labels, stamps, customized

stickers, scratch-off s and more

Mail

iNg

25(800) 398-5283

JETONE TABBER

Accomplish all your tabbing, labeling, stamp or decal affi xing requirements with the Secap Jet 1 Tabber. Easy to set up and operate in-line or off -line with the highest productivity for today’s mailing professionals. Its superb design and engineering combined with Secap’s fi rst class support off er your company years of reliable production.

Production speeds of up to 30,000 pieces per hourHigh production tabbing with precise applicationAvailable in standard or wide head confi gurationHeavy duty durable constructionSimple controls and easy job changesHandles a wide variety of media including labels, post-it notes, foil

seals and more

®

SA5300 PRO

The Secap SA5300 PRO takes productivity to new levels with its high capacity friction feeder for superior media handling. Designed for high speed and performance, the SA5300 PRO provides professional printing and imaging from a compact footprint. Address up to 30,000 pieces per hour with a 3” print area and handles media up to ½” in thickness.

Eight print quality options from draft light to executiveFour light mode settings for reducing ink usage600 x 600 dpi print resolution including graphics, with spot color

capabilityMedia control rollers off er precise registration for smaller mail piecesIntuitive control panel software monitors print status and controls

from the host PC allowing an operator to perform remote diagnostics

QUIKJET PRODUCTION SYSTEM

The Secap QuikJet high production addressing and imaging system off ers superior performance and fl exibility for the mailing professional. Processing up to 30,000 pieces per hour, the QuikJet System off ers unparalled speed and productivity. Featuring a fully synchronized system with the feeder, base and conveyor working together seamlessly, the QuikJet reduces manual intervention and increases your overall output.

Customize the QuikJet System based on your needs:Heavy duty vacuum transport base available in 36” or 56” lengthCustomize with 3”, 4.5” or 6” of printAdd a 6’ or 9’ UltraFeedTM Feeder for handling up to 4,500 (9’

conveyor) #10 envelopes at a timeUltraSortTM Conveyor (6’ or 9’) off er bundle sorts for improved media

handling & drying timesAdd a 20”, 30” or 36” dryer tableChoose a 2,000, 4,000 or 9,000 watt dryer for based on drying

requirementsSecap Ink Management System (SIMS) for siginifi cant reduction in ink

costs and increasing print productionSecap PostnetVerifi erTM for barcode print quality to meet USPS

requirements

Mail

iNg

www.printfs .com26

SHREDDERS

Destroyit 4107 High Capacity Cross Cut Shredder For organizations with a need for high volume shredding, an in-house shredding program based around Destroyit high capacity shredders is the most secure and economical way of disposing sensitive documents. Using a shredding service adds needless risk and expense. When you turn over documents to an outside company for disposal, you are eff ectively relinquishing control of your document security program

Shred Size : 1/4 “ x 2” Sheet Capacity: 65-82 sheets Shred Speed: 53 ft / min. Security Level: 3 Feed Opening: 16”

Destroyit 5009 Cross-cut Shredder Product Features Shredding services can be convenient but they also increase the chance of your company experiencing a security breach. However, you can keep things under wraps with an in-house shredder. One possibility is the DestroyIt 5009, a high-volume device that’s ideal for companies that need to shred a lot.

This shredder includes two automatic speed modes: “Power” for bulk shredding, and “Speed” for high speed shredding, high quality, hardened steel cutting shafts are soft metal resistant and can take CDs, VHS tapes (cross-cut only), and hardbound documents, and a convenient, centralized oiler for lubrication of the cutting head.

Particle Size: 7/32” x 2” Sheet Capacity: 350+ Shred Speed: 24-45 ft./min. (2 automatic speed modes) Security Level: Level 3 Feed Opening: 20”

Cross Cut 2360 2604 4002 4005

Shred Size (in): 3/32 x 5/8 3/16 x 1 1/2 3/16 x 1 1/2 3/16 x 1 1/2

Sheet Capacity: 6-8 20-22 24-26 30-32

Speed (ft/min): 14 18 25 30

Security Level 4 3 3 3

Feed Opening (in): 9 1/2 10 1/4 16 16

27(800) 398-5283

USED EQUiP

MENt

Used & Refurbished Machinery used.printf.com

PFS features the largest selection of new and used / reconditioned graphics machinery in the USA. We off er used solutions with the same level of support as we do with new machinery. Our experienced and factory certifi ed technicians service PFS used machinery to operate like new for many years.

Download our complete and current used list!The PFS used equipment list is updated monthly and features linkable pictures and pricing.

Need additional pictures or information?Used machinery for sale or trade? Need to move a piece of machinery or complete shop?

E-mail us today at sales@printfs.com

Paper Cutters • Drills • Folders • Perfect BindersStitchers / Staplers • Punch & Bind

Collators & Bookletmakers • Perf-Score-Number Shrink Wrap • Card Slitters • Laminators

Mailing Systems • ShreddersDigital & Off set Printing Presses

Paper Cutters

Triumph, Challenge & Perfecta 15 - 45”

Presses

RYOBI Conventional & DI - up to 36”

Perfect Binders

Horizon & Bourg - Single and Multi-Clamp

Booklet Makers & Collators

Horizon, Plockmatic & Bourg - Friction & Air-Feed

Tel: (714) 238-1133 • (800) 398-5283 Fax: (714) 238-1147 • E-mail: sales@printfs.com

This product catalog was printed on an MGI Digital Press and fi nished on an Plockmatic System 300 bookletmaking system. Fed ID#: 33-0889553 • Duns#: 13-209-0197 • WC#: ADP-057449-05 • Hartford #: 12 BF3704

Your Complete Source for Graphic-Arts, Print and Finishing Machinery & Support

Pre-Press ............................................................................................RIPs & Servers, Software, Scanning devices, Proofi ng & CTP

Printing Presses.............................................................................. Off set & digital Up to 10-color with perfecting & coating

Paper Cutters ............................................................................ 15” electric 88” Fully-programmable hydraulic / mechanical

Paper Drills .................................................................................Single-head tabletop & multiple-head, fl oor-model, hydraulic

Paper Folders ..........................................................................Tabletop offi ce Floor-model bindery / specialty applications

Collators / Bookletmakers ...............................................................................................Offi ce Deep-pocket, air-feed, bindery

Perfect Binders .......................................................................................................Single-clamp tabletop Multi-clamp bindery

Staplers / Stitchers ...................................................................................Tabletop staplers 2” Capacity fl oor-model stitchers

Punch and Bind..................................................................................Offi ce Commercial (Coil, Comb, Wire-O, Velo, Thermal)

Cornerounders ..........................................................................................................Tabletop manual 4” Floor-model hydraulic

Joggers ................................................................................................ Tabletop offi ce Large-format, fl oor-model, commercial

Stock Carts ..............................................................................................................Paper storage and movers for every application

Padding Racks & Systems ...............................................................................................Manual Floor-model, fully-automated

Perf/Score/Slit, Numbering .................................................................................................Tabletop Floor-model, commercial

Laminators ....................................................................................................Tabletop pouch Single-side, and wide-format roll

Shrink-Wrap Systems ................................................................................................... Tabletop Fully-automated L’ Bar systems

Used Machinery ...................................................................................................... Used and fully-refurbished machinery in stock

Parts ................................................................................................................We off er the highest-quality OEM products available

Supplies ......................................................................................Rollers, Plates, Blankets, Binding Supplies, Laminate & Custom

www.printfs .com

1632 Sierra Madre CirclePlacentia, CA 92870-6626, USA

Authorized Distributor for:

oUR FaCtoRY-tRaiNED tECHNiCal StaFF

SUPPoRtS EVERYtHiNg WE SEll