PRICE LIST E8 - aliaxis-ui.ataliaxis-ui.at/wp-content/uploads/2017/05/E8.15-PVC-C-Pipes... · PRICE LIST E8.15 PVC-C PIPE, FITTINGS ... C PVC-C LKD portball 3-way DUAL BLOCK® L B

PRICE LIST E8.15PVC-C PIPE, FITTINGS AND VALVES

2

Since 1954 FIP produces injection moulded valves and fittings in thermopla-stic materials for pressure pipeline systems thus becoming nowadays the lar-gest European valves manufacturer. FIP is a company of the Aliaxis Group: a worldwide industrial holding, ga-thering together a series of companies manufacturing and marketing plastic plumbing products for building, industrial and public utilities applications. FIP products are manufactured on EU production sites, operating to the Quality Assurance System in compliance with ISO 9001 and with the Environmental Management System ISO 14001 standards requirements.Moulded in FIP products there are over 50 years of know-how powered by a strong quest for innovation.

Company Certificates

Cert. N° 1 in compliance with the Standard UNI EN ISO 9001

Cert. N° 70 in compliance with the Standard UNI EN ISO 14001

CE Conformity

CE conformity according to European directives EC/2104/68.

R00-02-2017

Product managerPVC-U Manual & Actuated valves - Lucia Cambiaso Tel. +39 010 9621 266

PVC-C Manual & Actuated valves - Mauro Nobile Tel. +39 010 9621 414

PP-H & PVDF Manual & Actuated valves- Silvia Porcile Tel. +39 010 9621 267

Variable area flowmeters - Alberto Claveri Tel. +39 010 9621 340

PVC-U & PVC-C fittings - Mauro Nobile Tel. +39 010 9621 414

PE, PP-H & PVDF fittings - Silvia Porcile Tel. +39 010 9621 267

PP Compression fittings MAGNUM System& Clamp saddles - Stefano Carrea Tel. +39 010 9621 255

Technical Support [email protected]

3

PVC-C PIPE, FITTINGS

AND VALVES

INDEXGeneral info

How to read FIP Valves Commercial CodesHow to read FIP Fittings Commercial CodesReference standardsApprovals and quality marks

page 4page 6page 8page 10

ISO-UNI PIPE

Pressure pipe page 13

ISO-UNI FITTINGS

Solvent weld fittings - Equal socketSolvent weld fittings - CapSolvent weld fittings - UnionsSolvent weld fittings - ReducersSolvent weld fittings - StubsFlanges - ISO-DIN seriesFlanges - ANSI series

page 15page 17page 18page 20page 22page 23page 25

ISO-BSP FITTINGS

Adaptor fittingsAdaptor fittings - UnionsAdaptor fittings - Brass union endsAdaptor fittings - SS A316L union ends

page 27page 29page 32page 33

GLUES AND CLEANERS

Glues and cleaners page 34

BALL VALVES

VKD DN 10÷50 - DUAL BLOCK® 2-way ball valveVKD DN 65÷100 - DUAL BLOCK® 2-way ball valveTKD DN 10÷50 - DUAL BLOCK® 3-way ball valveVXE DN 10÷50 - Easyfit 2-way ball valveVXE DN 65÷100 - Easyfit 2-way ball valveSXE DN 10÷50 - Easyfit true union ball check valveSXE DN 65÷100 - Easyfit true union ball check valve

page 35page 40page 44page 47page 50page 53page 56

BUTTERFLY VALVE

FK DN 40÷300 - Butterfly valve page 59

DIAPHRAGM VALVE

DK DN 15÷65 - DIALOCK® 2-way diaphragm valveVM DN 80÷100 - Diaphragm valveCM DN 12÷15 - Compact diaphragm valve

page 66page 72page 75

OTHER VALVES

RV DN 15÷50 - Sediment strainers page 78

CONNECTIONS

Connections for ball and angle seat valvesSpare end connectors for true union diaphragm valves

page 80page 85

Packaging InformationConditions of supply

page 88page 89

4

FKVALVE MODEL

OCONNECTION STD.

CMATERIALS

VKD ball 2-way DUAL BLOCK® I ISO socket (metric) A ABS

TKD ball 3-way DUAL BLOCK® T D ISO spigot (metric) C PVC-C

LKD portball 3-way DUAL BLOCK® L B ISO butt welding (metric) F PVDF

VKR regulating ball 2-way DUAL BLOCK® BE PE100 ISO butt welding (metric) M PP-H

VXE ball 2-way Easyfit G JIS socket threaded (metric) V PVC-U

VEE ball 2-way Easyfit P Hose adaptor (metric) T PVC-U Transparent

SXE ball spring check valve Easyfit F BSP female threaded (inch)

FK butterfly multi-purpose R BSP male threaded (inch)

FE butterfly water L BS female (inch)

DK diaphragm DIALOCK” M BS male (inch)

VM diaphragm A ASTM socket (inch)

CM compact diaphragm Y ASTM spigot (inch)

CMU unionised compact diaphragm N NPT socket threaded (inch)

DKD direct acting diaphragm (only pneumatically actuated) J JIS socket (inch)

DKDU unionised direct acting diaphragm (only pneumatically actuated) O ISO-DIN flanged (metric)

DKM diaphragm act. diaphragm OA ANSI 150 flanged (inch)

DKP piston act. diaphragm (onlypneumatically actuated) OL LUG ISO-DIN (mm) flanged

DKPU unionised piston actuator diaphragm (only pneumatically actuated) OAL LUG ANSI 150 (inch) flanged

RM diaphragm cock

RP piston cock

RV strainer

RVU unionised strainer

VR piston check valve

VRU unionised piston check valve

VV angle seat valve

VVU unionised angle seat valve

SR ball check valve

VZ foot valve

VA air release valve

SV pressure relief valve

CR wafer check valve

Ex: FKOCRM315F FK butterfly valve, PVC-C disc, gear box, d 315, FPM gasket

CODESHOW TO READ FIP VALVES COMMERCIAL CODES

5

RMCOMMAND SYSTEM

315 SIZE

FSEAL

MATERIALMETRIC SERIES d (mm) INCH SERIES d/R (inches)SHX handle block (for VKD ball valves) 006 6 E EPDM

LM lever (for butterfly) 008 8 F FPM

RM gear box (for butterfly) 010 10 N NBR

FM bare shaft (for butterfly) 012 12 014 1/4” P PTFE

NC Pneumatic Normally Closed 016 16 038 3/8”

NO Pneumatic Normally Open 020 20 012 1/2”

DA Pneumatic Double Acting 025 25 034 3/4”

SA Pneumatic Single Acting 032 32 100 1”

EA Electric 230V AC 040 40 114 1” 1/4

EB Electric 115V AC 050 50 112 1” 1/2

EE Electric 24V AC 063 63 200 2”

EF Electric 24V DC 214 2” 1/4

EI Electric 400V trifase 075 75 212 2” 1/2

EM Electric 90-240V AC 234 2” 3/4

EL Electric 24V AC/DC 090 90 300 3”

110 110 400 4”

125 125

140 140 500 5”

160 160 600 6”

180 180

200 200

225 225 800 8”

250 250

280 280 810 10”

315 315 812 12”

355 355 814 14”

400 400 816 16”

6

BTYPE OF FITTINGS

IJOINT SYSTEM

VMATERIALS

A Hose connector C Cieco C PVC-C

B Socket union F BSP female threaded (inch) E PE

C End cap G JIS socket threaded (inch) F PVDF

D Reducer bush I ISO socket (metric) M PP-H

E Nut M BS male (inch) V PVC-U

F Fixed flange P Hose adaptor (metric) B PP-steel

F/B Union bush R BSP male threaded (inch) O Brass

G 90° elbow B ISO butt welding (metric)

H 45° elbow D ISO spigot (metric)

J Back nut A ASTM socket (inch)

K Transition fitting

L Tank connector

M Socket

N Nipple

NR Reduced nipple

O Free flange

P Plug

Q Collars

Q/B Union end connector

R Reduction

S 90° bend

T 90° tee

TR 90° tee with reduced offtake

U Clamp saddles

Z Pipe clips

Y 45° tee

X Cross

Ex: BIV050E PVC-U union, d50, socket for solvent welding, EPDM gasket

HOW TO READ FIP FITTINGS COMMERCIAL CODESCODES

7

050 SIZE

ESEAL MATERIAL

METRIC SERIES d (mm) INCH SERIES d/R (pollici)006 6 E EPDM

008 8 F FPM

010 10 N NBR

012 12 014 1/4” P PTFE

016 16 038 3/8”

020 20 012 1/2”

025 25 034 3/4”

032 32 100 1”

040 40 114 1” 1/4

050 50 112 1” 1/2

063 63 200 2”

214 2” 1/4

075 75 212 2” 1/2

234 2” 3/4

090 90 300 3”

110 110 400 4”

125 125

140 140 500 5”

160 160 600 6”

180 180

200 200

225 225 800 8”

250 250

280 280 810 10”

315 315 812 12”

355 355

400 400

REFERENCE

• ANSI B16.5 Pipe flanges and stubs-NPS 1/2 to NPS 24 mm/inch.• ASTM D1784 cl. 23548B Rigid PVC and PVC-C compounds (for industrial applications).• ASTM F437 PVC-C threaded pipe fittings, sch. 80.• ASTM F439 PVC-C pipe fittings.• ASTM F441 PVC-C pipe, sch. 40 and 80.• BS 10 Specification for flanges and bolts for pipes, valves and fittings.• BS 1560 Flanges for pipes, valves and fittings (Class designated). Steel, cast iron

and copper alloy flanges. Specification for steel flanges. • BS 4504 Flanges for pipes, valves and fittings (PN designated).• DIN 2501 Flanges, dimensions.• DIN 2999 Threads for pipes and fittings.• DIN 8063 Dimensions of PVC-C fittings.• DIN 8079-8080 PVC-C pipes, dimensions.• DIN 16962 PVC-C fittings for butt-welding or socket fusion, dimensions.• DIN 16963 Pipe connections and pipe components for pressurised fluids in HDPE.• EN 558-1 Industrial valves - face-to-face and centre-to-face dimensions of metal

valves for use in flanged pipe systems - Part 1: PN designated valves.• EN 1092-1 Flanges and their joints - Circular flanges for pipes, valves and accessories

- Part 1: Steel flanges, PN designated.• EN ISO 15493 Specifications for components and the system (Pipes, Fittings and Valves)

in PVC-C for industrial applications.• ISO 228-1 PVC-C fittings with threaded connections.• ISO 5211 Industrial valves - Part-turn actuator couplings

STANDARDSProduction of the TemperFIP100® PVC-C lines is carried out according to the highest quality standards and in full compliance with the environmental restrictions set by the applicable laws in force and in accordance with standard ISO 14001.All products are manufactured in accordance with a quality assurance system complying with standard ISO 9001.

8

• ISO 7005-1 Pipe flanges - Part 1: Steel flanges. • JIS B 2220 Steel pipe flanges.• UNI 11242 Solvent welding of PVC-C pipes, fittings and valves

9

E8.

15

APPROVALS AND

• ABS The TemperFIP100® PVC-C system is recognised as suitable for convey-

ing and treating sanitary and conditioning water onboard ships and other units classified by the American Bureau of Shipping (ABS).

• ACS The TemperFIP100® PVC-C system is certified as suitable for coming into

contact with water intended for human consumption according to the Attestation de conformité sanitaire (ACS).

• Bureau Veritas The TemperFIP100® PVC-C system is recognised as suitable for convey-

ing and treating sanitary and conditioning water onboard ships and other units classified by the Bureau Veritas - Marine Division.

• DIBt TemperFIP100® PVC-C valves have been tested and certified by DIBt

(Deutsche Institut für Bautechnik)

• DNV The TemperFIP100® PVC-C system is recognised as suitable for convey-

ing and treating sanitary and conditioning water onboard ships and other units classified by DNV.

• GOST-R - EAC The TemperFIP100® PVC-C system is GOST-R and EAC certified in accord-

ance with Russian regulations on Safety, Hygiene and Quality

• Lloyd’s Register The TemperFIP100® PVC-C pipes and fittings are recognised as suitable

for conveying and treating sanitary and conditioning water onboard ships and other units classified by Lloyd’s Register.

QUALITY MARKS

10

• NSF (National Sanitation Foundation USA) FIP PVC-C ball valves are listed according to the NSF/ANSI Standard 61 -

Drinking Water System Components - Health Effects.

• TA-Luft TemperFIP100® PVC-C valves have been tested and certified according to

“TA-Luft” by MPA Stuttgart in compliance with the Technical Instruction on Air Quality Control TA-Luft/ VDI 2440.

• UKR SEPRO TemperFIP100® PVC-C valves and fittings are certified in accordance with

Ukrainian regulations on Safety, Hygiene and Quality.

• WRAS TemperFIP100® PVC-C valves are recognised by the WRAS (Water Regu-

lation Advisory Scheme - UK)

11

E8.

15

12

Technical specificationsSize range d 16 ÷ d 225 (mm)Nominal pressure SDR 13.6 (PN16) with water at 20° C

SDR 21 (PN10) with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Solvent welding: EN ISO 15493

Can be coupled to pipes according to EN ISO 15493Reference standards Construction criteria: EN ISO 15493

Test methods and requirements: EN ISO 15493Installation criteria: DVS 2204, DVS 2221, UNI 11242

Material PVC-C

PIPE

Pipes under pressure with cold chemical weld jointing systems (solvent welding) using suitable solvent cement (TemperGLUE WELD-ON) and primer-cleaner.

TemperFIP100® PRESSURE PIPE

ISO-UNI

13

PVC-CPRESSURE PIPE

E8.

15

ISO-UNI PIPE

PIPEPVC-C Corzan® Pipe according to DIN8079/8080, RAL 7040 - light grey, std length 5m

d DN S mm kg/m PN16 SDR 13,6 - S6,3 Code €

16 10 1,2 0,110 PIPEC13016 2,27

20 15 1,5 0,170 PIPEC13020 3,38

25 20 1,9 0,260 PIPEC13025 5,21

32 25 2,4 0,420 PIPEC13032 7,66

40 32 3,0 0,630 PIPEC13040 11,73

50 40 3,7 0,970 PIPEC13050 17,82

63 50 4,7 1,530 PIPEC13063 28,43

75 65 5,6 2,200 PIPEC13075 40,16

90 80 6,7 2,880 PIPEC13090 61,78

110 100 8,2 4,310 PIPEC13110 92,18

160 150 11,8 9,040 PIPEC13160 260,27

d DN S mm kg/m PN10 SDR 21 - S10 Code €

110 100 5,3 2,890 PIPEC21110 81,27

160 150 7,7 6,060 PIPEC21160 153,83

225 200 10,8 12,200 PIPEC21225 312,61

14

Technical specificationsSize range d 16 ÷ 225 (mm)Nominal pressure PN 16 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Solvent welding: EN ISO 15493

Can be coupled to pipes according to EN ISO 15493

Flanging system: ISO 7005-1, EN ISO 15493, DIN 2501, ANSI B.16.5 cl. 150

Reference standards Construction criteria: EN ISO 15493Test methods and requirements: EN ISO 15493Installation criteria: DVS 2204, DVS 2221, UNI 11242

Fitting material PVC-CSeal material EPDM, FPM

FITTINGS

Series of fittings designed forconveying fluidsunder pressure with a cold chemical weld jointing system (solvent welding) using a suitable solvent cement (TemperGLUE WELD-ON) and cleaner-primer.

SOLVENT WELD FITTINGS, METRIC SERIES

ISO-UNI

15

PVC-C

E8.

15

SOLVENT WELD FITTINGS - EQUAL SOCKET

ISO-UNI FITTINGS

GICElbow 90°, socket for solvent welding

d PN Code € pack n./box

box type

16 16 GIC016 2,18 10 500 04

20 16 GIC020 2,46 10 260 04

25 16 GIC025 3,07 10 200 04

32 16 GIC032 3,65 10 90 04

40 16 GIC040 4,78 10 40 04

50 16 GIC050 8,33 5 30 04

63 16 GIC063 10,40 2 24 03

75 16 GIC075 19,83 - 12 04

90 16 GIC090 26,58 - 4 04

110 16 GIC110 48,71 - 10 02

160 16 GIC160 121,76 - 4 02

225 10 GIC225 606,29 - 2 01

HICElbow 45°, socket for solvent welding


box type

20 16 HIC020 2,93 10 360 04

25 16 HIC025 4,10 10 200 04

32 16 HIC032 4,99 10 100 04

40 16 HIC040 7,19 5 50 04

50 16 HIC050 11,53 5 30 04

63 16 HIC063 17,61 5 30 03

75 16 HIC075 27,10 - 8 04

90 16 HIC090 40,16 - 6 04

110 16 HIC110 65,43 - 6 03

160 16 HIC160 140,68 - 4 02

225 10 HIC225 460,97 - 2 01

16

PVC-CSOLVENT WELD FITTINGS - EQUAL SOCKET

ISO-UNI FITTINGS

MICDouble socket, socket for solvent welding


box type

16 16 MIC016 1,58 10 700 04

20 16 MIC020 1,82 10 400 04

25 16 MIC025 2,04 10 240 04

32 16 MIC032 2,49 10 120 04

40 16 MIC040 2,72 5 70 04

50 16 MIC050 4,53 5 60 04

63 16 MIC063 7,00 2 40 03

75 16 MIC075 10,40 - 24 04

90 16 MIC090 17,61 - 9 04

110 16 MIC110 32,02 - 24 02

160 16 MIC160 74,83 - 2 04

225 10 MIC225 334,30 - 2 02

TICTee 90° equal, socket for solvent welding


box type

16 16 TIC016 2,27 10 280 04

20 16 TIC020 2,72 10 200 04

25 16 TIC025 3,38 10 100 04

32 16 TIC032 4,10 10 70 04

40 16 TIC040 5,66 5 35 04

50 16 TIC050 9,49 5 25 03

63 16 TIC063 12,86 2 16 03

75 16 TIC075 26,58 - 22 02

90 16 TIC090 38,31 - 12 02

110 16 TIC110 59,10 - 8 02

160 16 TIC160 183,10 - 5 01

225 10 TIC225 718,48 - 1 02

17

PVC-C

E8.

15

SOLVENT WELD FITTINGS - CAP

ISO-UNI FITTINGS

CICEnd cap, socket for solvent welding


box type

20 16 CIC020 1,87 10 600 04

25 16 CIC025 2,97 10 400 04

32 16 CIC032 3,89 10 240 04

40 16 CIC040 5,15 10 140 04

50 16 CIC050 8,22 10 80 04

63 16 CIC063 9,49 5 60 03

75 16 CIC075 14,99 - 28 04

90 16 CIC090 21,38 - 15 04

110 16 CIC110 28,71 - 10 04

18

PVC-CSOLVENT WELD FITTINGS - UNIONS

ISO-UNI FITTINGS

BICSocket union, socket for solvent welding, with EPDM and FPM O-ring

d R1 PN EPDM code € FPM

code € pack n./box

box type

16 3/4" 16 BIC016E 8,09 BIC016F 10,76 10 300 04

20 1" 16 BIC020E 9,06 BIC020F 11,73 10 180 04

25 1"1/4 16 BIC025E 9,74 BIC025F 13,09 10 100 04

32 1"1/2 16 BIC032E 11,73 BIC032F 16,07 10 70 04

40 2" 16 BIC040E 15,83 BIC040F 22,23 10 40 04

50 2"1/4 16 BIC050E 21,90 BIC050F 29,26 10 90 02

63 2"3/4 16 BIC063E 31,10 BIC063F 39,29 2 50 02

Note: The socket union FPM version can be supplied in EPDM version with FPM gasket included

EFCPVC-C Union nut with BS parallel threads for BIC, BIFC, BIFOC, BIROC, BIFXC, BIRXC unions and for variable area flowmeters type FS,FC

R1 d BIC PN Code € pack n./box

box type

3/4" 16 16 EFC034 3,86 - - -

1" 20 16 EFC100 4,30 - - -

1" 1/4 25 16 EFC114 4,97 - - -

1" 1/2 32 16 EFC112 7,20 - - -

2" 40 16 EFC200 8,20 - - -

2" 1/4 50 16 EFC214 13,43 - - -

2" 3/4 63 16 EFC234 19,16 - - -

19

PVC-C

E8.

15

SOLVENT WELD FITTINGS - UNIONS

ISO-UNI FITTINGS

F/BICUnion bush for solvent welding

d R1 PN Code € pack n./box

box type

16 3/4" 16 FBIC016 4,00 - - -

20 1" 16 FBIC020 4,05 - - -

25 1"1/4 16 FBIC025 4,65 - - -

32 1"1/2 16 FBIC032 6,80 - - -

40 2" 16 FBIC040 8,70 - - -

50 2"1/4 16 FBIC050 11,48 - - -

63 2"3/4 16 FBIC063 13,69 - - -

20

PVC-CSOLVENT WELD FITTINGS - REDUCERS

ISO-UNI FITTINGS

TRICTee 90° reducing, socket for solvent welding with the socket offtake d1 reduced

d x d1 PN Code € pack n./box

box type

25 x 20 16 TRIC025020 2,93 10 120 04

32 x 20 16 TRIC032020 4,99 10 100 03

32 x 25 16 TRIC032025 4,99 10 90 03

40 x 20 16 TRIC040020 7,00 10 60 03

40 x 25 16 TRIC040025 7,00 10 60 03

50 x 25 16 TRIC050025 11,53 10 70 02

50 x 32 16 TRIC050032 11,53 10 60 02

63 x 25 16 TRIC063025 16,71 5 45 02

63 x 32 16 TRIC063032 16,71 5 45 02

75 x 25 16 TRIC075025 32,17 - 18 03

90 x 25 16 TRIC090025 40,02 - 15 02

110 x 25 16 TRIC110025 51,33 - 10 02

21

PVC-C

E8.

15

SOLVENT WELD FITTINGS - REDUCERS

ISO-UNI FITTINGS

DICReducing bush male spigot for solvent welding (d), female socket for solvent welding (d1 reduced)

d x d1 PN Code € pack n./box

box type

20 x 16 16 DIC020016 1,89 10 1100 04

25 x 20 16 DIC025020 2,18 10 600 04

32 x 20 16 DIC032020 2,53 10 400 04

32 x 25 16 DIC032025 2,53 10 400 04

40 x 20 16 DIC040020 4,10 10 240 04

40 x 25 16 DIC040025 4,10 10 240 04

40 x 32 16 DIC040032 4,10 10 240 04

50 x 32 16 DIC050032 4,22 10 140 04

50 x 40 16 DIC050040 4,22 10 120 04

63 x 32 16 DIC063032 6,70 5 70 04

63 x 40 16 DIC063040 6,70 5 70 04

63 x 50 16 DIC063050 6,70 5 60 04

75 x 50 16 DIC075050 10,62 - 56 04

75 x 63 16 DIC075063 10,62 - 56 04

90 x 50 16 DIC090050 14,86 - 36 04

90 x 63 16 DIC090063 14,86 - 36 04

90 x 75 16 DIC090075 14,86 - 36 04

110 x 63 16 DIC110063 22,82 - 18 04

110 x 75 16 DIC110075 22,82 - 18 04

110 x 90 16 DIC110090 22,82 - 18 04

160 x 110 16 DIC160110 56,36 - 6 04

225 x 160 10 DIC225160 230,69 - 6 02

22

PVC-CSOLVENT WELD FITTINGS - STUBS

ISO-UNI FITTINGS

QRCStub with serrated face according to DIN 8063 PN 10/16 with solvent weld socket, for use with flat gasket (for gasket sizes, see QHV)

d DN PN Code € pack n./box

box type

20 15 16 QRC020 2,95 10 600 04

25 20 16 QRC025 3,62 10 400 04

32 25 16 QRC032 4,31 10 200 04

40 32 16 QRC040 4,99 5 120 04

50 40 16 QRC050 5,21 5 60 04

63 50 16 QRC063 6,31 2 48 04

75 65 16 QRC075 9,49 - 24 04

90 80 16 QRC090 13,95 - 48 02

110 100 16 QRC110 21,67 - 32 02

160 150 16 QRC160 74,83 - 10 02

225 200 10 QRC225 288,99 - 6 02

23

PVC-C

E8.

15

FLANGES - ISO-DIN SERIES

ISO-UNI FITTINGS

ODCBacking ring for stub flange QRC according to EN/ISO/DIN

d DN *PMA (bar) Code € pack n./box

box type

20 15 10 ODC020 3,62 2 180 03

25 20 10 ODC025 4,31 2 140 03

32 25 10 ODC032 4,99 2 100 03

40 32 10 ODC040 6,10 2 36 04

50 40 10 ODC050 7,87 2 32 04

63 50 10 ODC063 8,77 2 28 04

75 65 10 ODC075 13,08 2 16 04

90 80 10 ODC090 14,42 2 24 03

110 100 10 ODC110 19,83 2 20 03

*PMA: maximum allowable pressure

ODBSteel core backing ring, PP/FRP coated, according to EN/ISO/DIN for stubs QRC. Drilled PN 10/16 up to DN 150


box type

20 15 16 ODB020 See EB price list - - -








**125 100 16 ODB125 See EB price list - - -

***180 150 16 ODB180 See EB price list - - -


PMA: Max allowable Pressure**to be used with stub QRC110

***to be used with stub QRC160

24

PVC-CFLANGES - ISO-DIN SERIES

ISO-UNI FITTINGS

ODBCSteel core blind flange, PP/FRP coated, according to EN/ISO/DIN. Drilling: PN 10/16 up to DN 150, PN 10 from DN 200


box type

20 15 16 ODBC020 See EB price list - - -








110/125 100 16 ODBC110 See EB price list - - -

160/180 150 16 ODBC160 See EB price list - - -

**225/200 200 16 ODBC200 See EB price list - - -

*PMA: Max admissible Pressure**drilled PN10

ODB-SWSteel core backing ring, PP/FRP coated, according to EN/ISO/DIN for stubs QRC


box type

**225 200 16 SWODBD225DN200 See E3 price list - - -

*PMA: pressione di esercizio massima ammissibile**foratura PN10

25

PVC-CFLANGES - ANSI RANGE

E8.

15

ISO-UNI FITTINGS

OABBacking ring ANSI B16.5 cl.150 in PP/FRP with steel core for stub flange QRC

d (inch) DN *PMA (bar) Code € pack n./box

box type

1/2" 15 16 OAB012 See EB price list - - -

3/4" 20 16 OAB034 See EB price list - - -

1" 25 16 OAB100 See EB price list - - -

1"1/4 32 16 OAB114 See EB price list - - -






*PMA: Max admissible Pressure

OABCBlind flange ANSI B16.5 cl.150 in PP/FRP grey with steel core

d (inch) DN *PMA (bar) Code € pack n./box

box type

1/2" 15 16 OABC012 See EB price list - - -

3/4" 20 16 OABC034 See EB price list - - -

1" 25 16 OABC100 See EB price list - - -

1"1/4 32 16 OABC114 See EB price list - - -






*PMA: maximum allowable pressure

26

Technical specificationsSize range d 16 ÷ 63 (mm); R 3/8” ÷ 2”Nominal pressure PN 16 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Solvent welding: EN ISO 15493

Can be coupled to pipes according to EN ISO 15493Thread: ISO 228-1, DIN 2999

Reference standards Construction criteria: EN ISO 15493Test methods and requirements: EN ISO 15493Installation criteria: DVS 2204, DVS 2221, UNI 11242

Fitting material PVC-CSeal material EPDM, FPM

FITTINGS

Series of fittings designed for conveyingfluids under pressure with threaded and cold chemical solvent weld jointing systems (solvent welding) using suitable solvent cement (TemperGLUE WELD-ON) and cleaner-primer.

TemperFIP100® ADAPTOR FITTINGS

ISO-BSP

27

PVC-C

E8.

15

ADAPTOR FITTINGS

ISO-BSP FITTINGS

GIMCElbow 90° reinforced, one plain socket for solvent welding the other BS parallel socket threaded with reinforcing Stainless Steel ring

d x R PN Code € pack n./box

box type

16 x 3/8" 16 GIMC016038 3,31 10 500 04

20 x 1/2" 16 GIMC020012 3,97 10 260 04

25 x 3/4" 16 GIMC025034 4,53 10 150 04

32 x 1" 16 GIMC032100 6,54 10 80 04

40 x 1"1/4 16 GIMC040114 8,09 10 40 04

50 x 1"1/2 16 GIMC050112 11,73 10 30 04

63 x "2 16 GIMC063200 15,83 5 45 02

TIMCTee 90° reinforced, with two plain sockets for solvent welding the third BS parallel socket threaded with reinforcing Stainless Steel ring


box type

16 x 3/8" 16 TIMC016038 4,99 10 180 04

20 x 1/2" 16 TIMC020012 5,42 10 180 04

25 x 3/4" 16 TIMC025034 5,66 10 100 04

32 x 1" 16 TIMC032100 7,00 10 60 04

40 x 1"1/4 16 TIMC040114 8,53 10 30 04

50 x 1"1/2 16 TIMC050112 13,08 10 20 04

63 x 2" 16 TIMC063200 16,27 5 10 04

28

PVC-CADAPTOR FITTINGS

ISO-BSP FITTINGS

MIMCDouble socket reinforced, one plain socket for solvent welding, the other BS parallel socket threaded with reinforcing Stainless Steel ring


box type

16 x 3/8" 16 MIMC016038 3,21 10 600 04

20 x 1/2" 16 MIMC020012 3,38 10 400 04

25 x 3/4" 16 MIMC025034 3,82 10 240 04

32 x 1" 16 MIMC032100 4,75 10 120 04

40 x 1"1/4 16 MIMC040114 6,54 5 80 04

50 x 1"1/2 16 MIMC050112 8,53 5 40 04

63 x 2" 16 MIMC063200 11,28 5 25 04

KIFCDouble adaptor, one end male (dm) spigot or female socket (df) for solvent welding, the other male BS parallel threaded spigot

dm x df x R PN Code € pack n./box

box type

20 x 16 x 3/8" 16 KIFC020016038 2,72 10 700 04

25 x 20 x 1/2" 16 KIFC025020012 3,18 10 400 04

32 x 25 x 3/4" 16 KIFC032025034 3,38 10 240 04

40 x 32 x 1" 16 KIFC040032100 4,10 10 140 04

50 x 40 x 1"1/4 16 KIFC050040114 4,99 5 120 03

63 x 50 x 1"1/2 16 KIFC063050112 5,89 5 60 03

75 x 63 x 2" 16 KIFC075063200 9,94 - 45 03

29

PVC-C

E8.

15

ADAPTOR FITTINGS - UNIONS

ISO-BSP FITTINGS

BIFCSocket union, one end plain socket for solvent welding, the other BS parallel socket threaded, with EPDM gasket

d x R R1 PN Code € pack n./box

box type

16 x 3/8" 3/4" 16 BIFC016038E 13,08 10 300 04

20 x 1/2" 1" 16 BIFC020012E 14,42 10 180 04

25 x 3/4" 1"1/4 16 BIFC025034E 15,36 10 100 04

32 x 1" 1"1/2 16 BIFC032100E 17,14 2 60 04

40 x 1"1/4 2" 16 BIFC040114E 28,00 2 40 04

50 x 1"1/2 2"1/4 16 BIFC050112E 40,16 2 90 02

63 x 2" 2"3/4 16 BIFC063200E 45,15 2 60 02

30

PVC-CADAPTOR FITTINGS - UNIONS

ISO-BSP FITTINGS

BIFOCSocket union PVC-C/brass , one PVC-C end socket (d) for solvent welding, the other Brass BS parallel female threaded (R), with EPDM O-Ring


box type

16 x 3/8" 3/4" 16 BIFOC016038E 16,78 50 100 05

20 x 1/2" 1" 16 BIFOC020012E 20,16 40 80 05

25 x 3/4" 1"1/4 16 BIFOC025034E 26,59 20 40 05

32 x 1" 1"1/2 16 BIFOC032100E 31,39 14 28 05

40 x 1"1/4 2" 16 BIFOC040114E 43,84 8 16 05

50 x 1"1/2 2"1/4 16 BIFOC050112E 53,56 4 8 05

63 x 2" 2"3/4 16 BIFOC063200E 70,16 - 12 05

BIROCSocket union PVC-U/brass , one PVC-C end socket(d) for solvent welding, the other Brass BS parallel female threaded (R), with EPDM O-Ring


box type

16 x 3/8" 3/4" 16 BIROC016038E 18,25 50 100 05

20 x 1/2" 1" 16 BIROC020012E 22,10 35 70 05

25 x 3/4" 1"1/4 16 BIROC025034E 27,94 15 30 05

32 x 1" 1"1/2 16 BIROC032100E 36,21 12 24 05

40 x 1"1/4 2" 16 BIROC040114E 51,47 8 16 05

50 x 1"1/2 2"1/4 16 BIROC050112E 63,05 4 8 05

63 x 2" 2"3/4 16 BIROC063200E 79,45 - 10 05

31

PVC-C

E8.

15

ADAPTOR FITTINGS - UNIONS

ISO-BSP FITTINGS

BIFXC Socket union, one PVC-C end socket for solvent welding (d), the other SS A316L BS parallel female threaded (R), with EPDM or FPM O-Ring

d x R R1 PN EPDM code € FPM


box type

16 x 3/8" 3/4" 16 BIFXC016038E 41,12 BIFXC016038F 42,33 50 100 05

20 x 1/2" 1" 16 BIFXC020012E 43,72 BIFXC020012F 46,07 40 80 05

25 x 3/4" 1"1/4 16 BIFXC025034E 46,76 BIFXC025034F 50,17 20 40 05

32 x 1" 1"1/2 16 BIFXC032100E 54,78 BIFXC032100F 58,08 14 28 05

40 x 1"1/4 2" 16 BIFXC040114E 74,71 BIFXC040114F 81,77 8 16 05

50 x 1"1/2 2"1/4 16 BIFXC050112E 86,70 BIFXC050112F 95,92 4 8 05

63 x 2" 2"3/4 16 BIFXC063200E 112,00 BIFXC063200F 119,99 - 12 05

BIRXCSocket union, one PVC-C end socket(d) for solvent welding, the other SS A316L BS parallel male threaded (R), with EPDM or FPM O-Ring

d x R R1 PN EPDM code € FPM


box type

16 x 3/8" 3/4" 16 BIRXC016038E 42,72 BIRXC016038F 44,73 50 100 05

20 x 1/2" 1" 16 BIRXC020012E 44,80 BIRXC020012F 47,86 35 70 05

25 x 3/4" 1"1/4 16 BIRXC025034E 48,53 BIRXC025034F 52,47 15 30 05

32 x 1" 1"1/2 16 BIRXC032100E 56,83 BIRXC032100F 60,33 12 24 05

40 x 1"1/4 2" 16 BIRXC040114E 77,33 BIRXC040114F 84,43 8 16 05

50 x 1"1/2 2"1/4 16 BIRXC050112E 90,98 BIRXC050112F 98,77 4 8 05

63 x 2" 2"3/4 16 BIRXC063200E 133,28 BIRXC063200F 141,04 - 10 05

32

PVC-CADAPTOR FITTINGS - BRASS UNION ENDS

ISO-BSP FITTINGS

Q/BFOBrass Union end: BS parallel threaded socket

R Code € pack n./box

box type

3/8" QBFO038 See E3 price list - - -



1" QBFO100 See E3 price list - - -

1"1/4 QBFO114 See E3 price list - - -

1"1/2 QBFO112 See E3 price list - - -

2" QBFO200 See E3 price list - - -

Q/BROBrass Union end: BS parallel male threaded


box type

3/8" QBRO038 See E3 price list - - -



1" QBRO100 See E3 price list - - -

1"1/4 QBRO114 See E3 price list - - -

1"1/2 QBRO112 See E3 price list - - -

2" QBRO200 See E3 price list - - -

33

PVC-C

E8.

15

ADAPTOR FITTINGS - SS A316L UNION ENDS

ISO-BSP FITTINGS

Q/BFXStainless Steel A316L Union end: BS parallel threaded socket


box type

3/8" QBFX038 See E3 price list - - -



1" QBFX100 See E3 price list - - -

1"1/4 QBFX114 See E3 price list - - -

1"1/2 QBFX112 See E3 price list - - -

2" QBFX200 See E3 price list - - -

Q/BRXStainless Steel A316L Union end: BS parallel male threaded


box type

3/8" QBRX038 See E3 price list - - -



1" QBRX100 See E3 price list - - -

1"1/4 QBRX114 See E3 price list - - -

1"1/2 QBRX112 See E3 price list - - -

2" QBRX200 See E3 price list - - -

34

GLUES AND CLEANERS

GLUES AND CLEANERSPVC-C

TEMPERGLUE 724

Code € pack n./box

box type

TG724 28,89 500 g - -

PRIMER CLEANER P70 PVC-C


box type

PCP70 12,17 500 g - -

To be used with TEMPERGLUE 724 Solvent CementNote: It is advisable the use of Temperglue 724 with Primer Cleaner P70 for solvent welding of Corzan PVCC components in contact with aggressive

chemical fluids (strong acids and bases)

Temperglue


box type

TGBISON 28,89 500 g - -

CLEANERCleaner TEMPERFIP 100 for PVC-C Corzan pipes and pressure fittings


box type

PCBISON 12,17 500 g

To be used with TEMPERGLUE Solvent Cement

35

E8.

15

Technical specificationsConstruction 2-way True union ball valve

with locked carrier and lockable union nutsSize range DN 10 ÷ 50Nominal pressure PN 16 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Solvent welding: EN ISO 15493, ASTM F 439. Can be

coupled to pipes according to EN ISO 15493, ASTM F 441Thread: ISO 228-1, DIN 2999, ASTM F437Flanging system: ISO 7005-1, EN ISO 15493, EN 558-1,DIN 2501, ANSI B.16.5 cl. 150, JIS B 2220

Reference standards Construction criteria: EN ISO 16135, EN ISO 15493Test methods and requirements: ISO 9393Installation criteria: DVS 2204, DVS 2221, UNI 11242Actuator couplings: ISO 5211

Valve material PVC-CSeal material EPDM, FPM (standard size O-Ring);

PTFE (ball seats)

Control options Manual control; electric actuator; pneumatic actuator

VKD

FIP has developed aVKD DUAL BLOCK®2-way ball valveto introduce a highreference standard in thermoplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required by industrial applications.

DUAL BLOCK® 2-WAY BALL VALVE

DN 10÷50

• Connection system for solvent weld, threaded and flanged joints• Patented SEAT STOP® ball seat carrier system that lets you micro-adjust

ball seats and minimise the axial force effect.• Easy radial disassembly allowing quick replacement of O-rings and ball

seats without any need for tools• PN16 True Union valve body made for rigid PVC-C injection moulding

equipped with built-in bores for actuation. ISO 9393 compliant test requi-sites

• Option of disassembling downstream pipes with the valve in the closed po-sition

• Floating full bore ball with high surface finish• Carrier integrated in the body for valve anchoring• Ball seat carriers can be adjusted using the Easytorque adjustment kit• Valve material compatibility (PVC-C) and elastomer seal elements

(EPDM or FPM), with water, drinking water and other food substances as per current regulations

36

1 HIPVC Ergonomic multifunctional handle equipped with removable tool to adjust the ball seat carrier.

2 Handle block 0°- 90° SHKD (available as an accessory) ergonomically operable during service and lockable

3 Robust integrated bracket for valve anchoring, for easy and quick automation even after valve installation on the system via the Power Quick module (optional)

4 DUAL BLOCK® patented lock system that ensures union nut tightening hold even in severe conditions such as vibrations or heat dilation

1

2

3

4

37

VKD DN 10÷50PVC-C

E8.

15


VKDICDUAL BLOCK® ball valve with metric plain socket ends for solvent welding

d DN PN EPDM code € FPM


box type

16 10 16 VKDIC016E 48,25 VKDIC016F 62,68 1 22 03

20 15 16 VKDIC020E 48,25 VKDIC020F 62,68 1 22 03

25 20 16 VKDIC025E 52,35 VKDIC025F 67,70 1 12 03

32 25 16 VKDIC032E 62,68 VKDIC032F 76,25 1 12 03

40 32 16 VKDIC040E 73,02 VKDIC040F 86,10 1 8 03

50 40 16 VKDIC050E 88,55 VKDIC050F 108,69 1 8 03

63 50 16 VKDIC063E 111,98 VKDIC063F 140,68 1 6 02

VKDIC/SHXDUAL BLOCK® ball valve with handle block and stainless steel inserts for fixation, metric plain socket ends for solvent welding



box type

16 10 16 VKDICSHX016E 60,56 VKDICSHX016F 74,98 1 22 03







38

VKD DN 10÷50PVC-CDUAL BLOCK® 2-WAY BALL VALVE

VKDDCDUAL BLOCK® ball valve with metric plain spigot ends for solvent welding



box type

20 15 16 VKDDC020E 55,46 VKDDC020F 69,94 1 22 03

25 20 16 VKDDC025E 60,00 VKDDC025F 71,28 1 12 03

32 25 16 VKDDC032E 72,17 VKDDC032F 86,50 1 6 03

40 32 16 VKDDC040E 83,88 VKDDC040F 96,95 1 4 04

50 40 16 VKDDC050E 96,95 VKDDC050F 121,32 1 6 03

63 50 16 VKDDC063E 125,97 VKDDC063F 156,51 1 3 03

VKDOCDUAL BLOCK ® ball valve with EN/ISO/DIN PN 10/16 fixed flanges, face to face according to EN 558-1.



box type

20 15 16 VKDOC020E 102,36 VKDOC020F 125,88 1 12 03

25 20 16 VKDOC025E 108,19 VKDOC025F 130,49 1 8 03

32 25 16 VKDOC032E 122,56 VKDOC032F 142,43 1 8 03

40 32 16 VKDOC040E 168,06 VKDOC040F 187,11 1 4 03

50 40 16 VKDOC050E 194,98 VKDOC050F 221,83 - 1 05

63 50 16 VKDOC063E 229,61 VKDOC063F 270,89 - 1 05

39

VKD DN 10÷50PVC-C

E8.

15


VKDOACDUAL BLOCK ® ball valve with ANSI B16.5 cl.150#FF fixed flanges



box type

1/2” 15 16 VKDOAC012E 102,36 VKDOAC012F 125,88 1 8 03

3/4” 20 16 VKDOAC034E 108,19 VKDOAC034F 130,49 1 8 03

1” 25 16 VKDOAC100E 122,56 VKDOAC100F 142,43 1 4 03

1” 1/4 32 16 VKDOAC114E 168,06 VKDOAC114F 187,11 1 4 03

1” 1/2 40 16 VKDOAC112E 194,98 VKDOAC112F 221,83 - 1 05

2” 50 16 VKDOAC200E 229,61 VKDOAC200F 270,89 - 1 05

40

FIP has developed aVKD DUAL BLOCK®ball valve to introduce a high reference standard in thermoplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required by industrial applications.This valve is alsoequipped with acustomisingLabelling System.

Technical specificationsConstruction 2-way True Union ball valve with locked carrier and

union nuts.Size range DN 65 ÷ 100Nominal pressure PN 16 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Solvent welding: EN ISO 15493, ASTM F 439. Can be coupled

to pipes according to EN ISO 15493, ASTM F 441Thread: ISO 228-1, DIN 2999, ASTM F437Flanging system: ISO 7005-1, EN ISO 15493, EN 558-1,DIN 2501, ANSI B.16.5 cl. 150, JIS B 2220


Valve material PVC-CSeal material EPDM, FPM;

PTFE (ball seats)


VKD


• Connection system for solvent weld, threaded and flanged joints• Patented SEAT STOP® ball seat carrier system that lets you micro-adjust

ball seats and minimise the axial force effect.• Easy radial disassembly allowing quick replacement of O-rings and ball



• Option of disassembling downstream pipes with the valve in the closed po-sition

• Full bore ball with high surface finish• Carrier integrated in the body for valve anchoring• Possibility of installing a manual reducer or pneumatic and/or electric actu-

ators by applying an ISO standard drilling pattern PP-GR flange• STAINLESS steel molded-in stem, with square section as per ISO 5211• Valve material compatibility (PVC-C) and elastomer seal elements


DN 65÷100

41

E8.

151 HIPVC ergonomic multifunctional handle for quick operation, block and graduated adjustment in 10 positions. Possibility of inhibiting rotation with a lock

2 Customisable Labelling System: built-in LCE module in the hub made of a transparent protection plug and customisable tag holder using the LSE set (available as accessory). The customisation lets you identify the valve on the system according to specific needs i


4 Double stem with double O-Rings for ball centring and operating torque reduction

1

2

3

4

4

42

VKD DN 65÷100PVC-CDUAL BLOCK® 2-WAY BALL VALVE

VKDICDUAL BLOCK® ball valve with metric plain socket ends for solvent welding



box type

75 65 16 VKDIC075E 328,08 VKDIC075F 424,34 - 1 04

90 80 16 VKDIC090E 430,44 VKDIC090F 544,29 - 1 03

110 100 16 VKDIC110E 519,35 VKDIC110F 633,21 1 1 03

VKDDCDUAL BLOCK® ball valve with metric plain spigot ends for solvent welding



box type

75 65 16 VKDDC075E 360,87 VKDDC075F 457,15 - 1 04

90 80 16 VKDDC090E 473,52 VKDDC090F 587,37 - 1 03

110 100 16 VKDDC110E 571,27 VKDDC110F 685,14 1 1 03

VKDOCDUAL BLOCK ® ball valve with EN/ISO/DIN PN 10/16 fixed flanges*, face to face according to EN558-1



box type

75 65 16 VKDOC075E 492,11 VKDOC075F 588,38 - 1 04

90 80 16 VKDOC090E 645,68 VKDOC090F 759,53 - 1 03

110 100 16 VKDOC110E 779,04 VKDOC110F 892,87 1 1 03

* Flanges with oval holes matching both DIN and ANSI standards

43

VKD DN 65÷100PVC-C

E8.

15


VKDOACDUAL BLOCK ® ball valve with ANSI B16.5 cl.150#FF fixed flanges *

Size DN PN EPDM code € FPM


box type

2” 1/2 65 16 VKDOC075E 492,11 VKDOC075F 588,38 - 1 04

3” 80 16 VKDOC090E 645,68 VKDOC090F 759,53 - 1 03

4” 100 16 VKDOC110E 779,04 VKDOC110F 892,87 1 1 03

* Flanges with oval holes matching both DIN and ANSI standards

44

Technical specificationsConstruction 3-way True Union ball valve with locked carrier and

union nuts.Size range DN 10 ÷ 50Nominal pressure PN 16 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Solvent welding: EN ISO 15493, ASTM F 439. Can be

coupled to pipes according to EN ISO 15493, ASTM F 441Thread: ISO 228-1, DIN 2999, ASTM F437



PTFE (ball seats)


TKD

FIP has developed aVKD DUAL BLOCK®ball valve to introduce a high reference standard in thermoplastic valve design. TKD is a True Union diverting and mixing ball valve that meets the most stringent needs required in industrial applications.


• Connection system for solvent weld and threaded joints• Patented SEAT STOP® ball seat carrier system that lets you micro-adjust

ball seats and minimise axial force effects• Easy radial disassembly allowing quick replacement of O-rings and ball



• Option of disassembling downstream pipes with the valve in the closed position

• High surface finish stem with double O-Ring and double connection key to the ball, equipped with optical position indicator for correct handle installation

• Carrier integrated in the body for valve anchoring• Possibility of installing pneumatic and/or electric actuators thanks to the

robust integrated bracket for valve anchoring for easy and quick automa-tion using the Power Quick module (optional)

• Valve material compatibility (PVC-C) and elastomer seal elements (EPDM or FPM), with water, drinking water and other food substances as per current regulations

DN 10÷50

45

E8.

15

1

4

2

3

5

1 HIPVC Ergonomic handle equipped with tool to adjust the ball seat carrier. Possibility of installing the LTKD stroke limiter (available as an accessory) that permits ball and handle rotation only for set opening and closing angles at 90° or 180°

2 Handle block 0°- 90° SHKD (available as an accessory) ergonomically operable during service and lockable


4 Ball shutter high surface finish with floating type full passage with T or L port

5 4 PTFE ball seat system that compensates axial force guaranteeing optimal manageability and long working life

46

TKD DN 10÷50PVC-CDUAL BLOCK® 3-WAY BALL VALVE

TKDIC - LKDICDUAL BLOCK® 3-way ball valve with metric plain socket ends for solvent welding. TKDIC - T bore / LKDIC - L bore

d DN PNTKDIC EPDM code

€TKDIC

FPM code

€LKDIC EPDM code

€LKDIC

FPM code

€ pack n./box

box type

16 10 16 TKDIC016E 91,67 TKDIC016F 99,21 LKDIC016E 105,44 LKDIC016F 112,97 1 6 04





50 40 16 TKDIC050E 163,88 TKDIC050F 194,16 LKDIC050E 188,43 LKDIC050F 218,76 - 1 05

63 50 16 TKDIC063E 208,43 TKDIC063F 246,67 LKDIC063E 239,70 LKDIC063F 277,93 - 1 05

47

E8.

15

Technical specificationsConstruction Easyfit 2-way True Union ball valve with locked

carrierSize range DN 10 ÷ 50Nominal pressure PN 16 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Solvent welding: EN ISO 15493, ASTM F 439. Can be


Reference standards Construction criteria: EN ISO 16135, EN ISO 15493Test methods and requirements: ISO 9393Installation criteria: DVS 2204, DVS 2221, UNI 11242


PTFE (ball seats)

Control options Manual control

VXE

FIP and Giugiaro Design designed anddeveloped VXE Easyfit, the innovative True union ball valve with union nut tightening control system that permitssimple and safe installation for reliable service in time. This valve is also equipped with the customisable Labelling System.

EASYFIT 2-WAY BALL VALVE

• Patented Easyfit system: innovative mechanism based on the principle of the bevel gear pair that controls valve union nut rotation during installation.

• Connection system for solvent weld and threaded joints• Valve material compatibility (PVC-C) and elastomer seal elements (EPDM

or FPM), with water, drinking water and other food substances as per cur-rent regulations

• Easy radial disassembly allowing quick replacement of O-rings and ball seats without any need for tools

• PN16 True Union valve body made for PVC-C injection moulding and Eu-ropean Directive 97/23/EC compliant for PED pressurised equipment. ISO 9393 compliant test requirements

• Short face to face dimension according to international regulation ISO 7508 series III ”short” and fully interchangeable with previous VX Ergo series models


• Floating full bore ball with high surface finish made in CNC work stations to achieve precise dimensional tolerance and high surface finish

DN 10÷50

48

1 Two position Easyfit ergonomic multifunctional handle with union nut tightening control which can be used to adjust the ball seat carriers. Handle use is especially indicated for maintenance work where space is limited and hard to access

2 Customisable Labelling System: built-in LCE module on the handle made up of a transparent protection plug and customisable tag holder with LSE set (available as accessory). The customisation lets you identify the valve on the system according to specific needs

3 The PTFE ball seat system with locked carrier adjustable via Easyfit multifunctional handle or Easytorque adjustment kit (available as an accessory)

4 High surface finish stem with double O-Ring, produced in CNC work stations to achieve precise dimensional tolerance and high surface finish

21

4

3

49

VXE DN 10÷50PVC-C

E8.

15


VXEICBall valve EASYFIT with metric plain socket ends for solvent welding



box type

16 10 16 VXEIC016E 39,56 VXEIC016F 51,28 5 30 04

20 15 16 VXEIC020E 39,56 VXEIC020F 51,28 5 30 04

25 20 16 VXEIC025E 42,79 VXEIC025F 55,33 5 30 04

32 25 16 VXEIC032E 48,39 VXEIC032F 58,91 5 20 04

40 32 16 VXEIC040E 58,87 VXEIC040F 69,41 2 14 04

50 40 16 VXEIC050E 68,16 VXEIC050F 83,63 2 6 04

63 50 16 VXEIC063E 92,15 VXEIC063F 115,84 2 6 04

VXEACBall valve EASYFIT with ASTM plain socket ends for solvent welding



box type

1/2” 15 16 VXEAC012E 40,74 VXEAC012F 52,81 5 30 04

3/4” 20 16 VXEAC034E 44,08 VXEAC034F 56,99 5 30 04

1” 25 16 VXEAC100E 49,85 VXEAC100F 60,68 5 20 04

1” 1/4 32 16 VXEAC114E 60,62 VXEAC114F 71,49 2 14 04

1” 1/2 40 16 VXEAC112E 70,21 VXEAC112F 86,14 2 6 04

2” 50 16 VXEAC200E 94,91 VXEAC200F 119,31 2 6 04

50

Technical specificationsConstruction Easyfit 2-way True Union ball valve with locked

carrierSize range DN 65 ÷ 100Nominal pressure PN 16 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Solvent welding: EN ISO 15493, ASTM F 439. Can be

coupled to pipes according to EN ISO 15493, ASTM F 441Thread: ISO 228-1, DIN 2999, ASTM F437Flanging system: ISO 7005-1, EN ISO 15493, EN 558-1,DIN 2501, ANSI B.16.5 cl. 150, JIS B 2220


Valve material PVC-CControl options Manual control, electric actuator, pneumatic actuator

VXE

FIP and Giugiaro Design designed anddeveloped VXE Easyfit, the innovative True union ball valve with union nut tightening control system that permitssimple and safe installation for reliable service in time. This valve is also equipped with the customisable Labelling System.


• Patented Easyfit system: innovative mechanism based on the multifunc-tional handle quick release mechanism that permits union nut rotation during valve installation and ball seat carrier adjustment

• Connection system for solvent weld and threaded joints• Valve material compatibility (PVC-C) and elastomer seal elements


• Easy radial disassembly allowing quick replacement of O-rings and ball seats without any need for tools

• PN16 True Union valve body made for PVC-C injection moulding and Eu-ropean Directive 97/23/EC compliant for PED pressurised equipment. ISO 9393 compliant test requirements

• Valve body with built in anchoring frame for the special Power Quick mod-ule dedicated to accessory or pneumatic and electric actuator installation


• Floating full bore ball with high surface finish made in CNC work stations to achieve precise dimensional tolerance and high surface finish

DN 65÷100

51

E8.

15

1

1 Innovative Easyfit quick release handle made up of a central hub firmly coupled with the stem valve and dual spoke grip that can be released from the hub with a simple operation and used as a ball seat adjustment tool and as a union nut tightening tool thanks to the hooked insert that, perfectly adapting to their external profile, allows the handle to transform into a wrench to control union nut rotation

2 Customisable Labelling System: built-in LCE module in the hub made up of transparent protection plug and customisable tag holder using the LSE set (available as accessory). The customisation lets you identify the valve on the system according to specific needs

3 PTFE ball seat system with locked carrier adjustable via the Easyfit quick release handle

4 Stem with high surface finish and double O-Ring and PTFE anti-friction disk that limits friction to a minimum and grants excellent operating torque

5 Locking device in closing and opening via lock

2

3

45

52

VXE DN 65÷100PVC-CEASYFIT 2-WAY BALL VALVE

VXEICBall valve EASYFIT with metric plain socket ends for solvent welding



box type

75 65 16 VXEIC075E 214,33 VXEIC075F 253,23 1 2 04

90 80 16 VXEIC090E 276,90 VXEIC090F 324,04 1 2 03

110 100 16 VXEIC110E 389,86 VXEIC110F 465,84 1 1 03

VXEACBall valve EASYFIT with ASTM plain socket ends for solvent welding



box type

2"1/2 65 16 VXEAC212E 214,33 VXEAC212F 253,23 1 2 04

3” 80 16 VXEAC300E 276,90 VXEAC300F 324,04 1 2 03

4” 100 16 VXEAC400E 389,86 VXEAC400F 465,84 1 2 02

53

E8.

15

Technical specificationsConstruction Easyfit True Union ball check valve with locked carrier

Size range DN 10 ÷ 50Nominal pressure PN 16 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Solvent welding: EN ISO 15493, ASTM F 439. Can be


Reference standards Construction criteria: EN ISO 16137, EN ISO 15493,Test methods and requirements: ISO 9393Installation criteria: DVS 2204, DVS 2221, UNI 11242

Valve material PVC-CSeal material EPDM, FPM

SXE

The SXE Easyfit check valve with ball shutter line developed with Giugiaro Design stands out for the innovative installation method that guarantees reliable service over time.This valve is alsoequipped with acustomisingLabelling System.

EASYFIT TRUE UNION BALL CHECK VALVE• Connection system for solvent weld and threaded joints• Valve material compatibility (PVC-C) with water conveyance, drinking

water and other food substances according to current regulations• PN16 True Union valve body made for PVC-C injection moulding and Eu-

ropean Directive 97/23/EC compliant for PED pressurised equipment. ISO 9393 compliant test requirements

• Short face to face dimensionaccording to international regulation ISO 7508 series III ”short” and fully interchangeable with VXE DN 10÷50 ball valve models

• Union nuts with rack for tightening adjustment via Easyfit handle or via Easytorque adjustment kit (available as accessories)

• Can be installed in either a vertical (preferable) or horizontal position

DN 10÷50

54

1 Customisable Labelling System: built-in LCE module on the valve body made up of transparent protection plug and customisable tag holder using the LSE set (available as accessory). The customisation lets you identify the valve on the system according to specific needs

2 Optimised dynamic fluid design: energy savings due to the improved valve Kv value and consequent reduced pressure drop

3 High surface finish ball shutter: wear reduction, increase in working life and reduced valve maintenance. Ideal for conveying dirty fluids, even with suspended solids and filaments thanks to the special design that permits internal valve self-cleaning

4 Locked ball seat carrier: safe disassembly for maintenance with the Easyfit multifunctional handle or Easytorque kit

2

3

41

55

SXE-SSE DN 10÷50PVC-C

EASYFIT TRUE UNION BALL CHECK VALVE

E8.

15

SXEICTrue Union Ball Check Valve Easyfit with metric plain socket ends for solvent welding



box type

16 10 16 SXEIC016E 47,46 SXEIC016F 48,70 2 30 04

20 15 16 SXEIC020E 47,46 SXEIC020F 48,70 2 30 04

25 20 16 SXEIC025E 51,36 SXEIC025F 52,57 2 30 04

32 25 16 SXEIC032E 61,86 SXEIC032F 62,91 2 20 04

40 32 16 SXEIC040E 70,66 SXEIC040F 76,35 2 14 04

50 40 16 SXEIC050E 96,20 SXEIC050F 102,23 2 6 04

63 50 16 SXEIC063E 115,84 SXEIC063F 119,31 2 6 04

SXEACTrue Union Ball Check Valve Easyfit with ASTM plain socket ends for solvent welding



box type

1/2” 15 16 SXEAC012E 48,88 SXEAC012F 50,18 2 30 04

3/4” 20 16 SXEAC034E 52,90 SXEAC034F 54,14 2 30 04

1” 25 16 SXEAC100E 63,72 SXEAC100F 64,79 2 20 04

1"1/4 32 16 SXEAC114E 72,77 SXEAC114F 78,64 2 14 04

1"1/2 40 16 SXEAC112E 99,07 SXEAC112F 105,29 2 6 04

2” 50 16 SXEAC200E 119,31 SXEAC200F 123,40 2 6 04

56

Technical specificationsConstruction Easyfit True Union ball check valve with locked carrier Size range DN 65 ÷ 100Nominal pressure PN 16 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Solvent welding: EN ISO 15493, ASTM F 439. Can be



Valve material PVC-CSeal material EPDM, FPM (standard size O-Ring)

SXE

EASYFIT TRUE UNION BALL CHECK VALVE• Connection system for solvent weld and threaded joints• Valve material compatibility (PVC-C) with water conveyance, drinking

water and other food substances according to current regulations • PN16 True Union valve body made for PVC-C injection moulding and Eu-

ropean Directive 97/23/EC compliant for PED pressurised equipment. ISO 9393 compliant test requirements

• Easy radial disassembly and fully interchangeable with VXE 65-100 valve models

• Union nut profile that perfectly adapts to the Easyfit multifunctional han-dle hooked insert (available as an accessory) that lets you control union nut rotation

• Can be installed in either a vertical (preferable) or horizontal position

DN 65÷100The SXE Easyfitcheck valve with ball shutter line developed withGiugiaro Design stands out for the innovative installation method that guarantees reliable service over time.This valve is alsoequipped with acustomisingLabelling System.

57

E8.

151 Customisable Labelling

System: built-in LCE module on the valve body made up of transparent protection plug and customisable tag holder using the LSE set (available as accessory). The customisation lets you identify the valve on the system according to specific needs

2 Optimised dynamic fluid design: energy savings due to the improved valve Kv value and consequent reduced pressure drop

3 High surface finish ball shutter: reduced wear, longer working life and reduced valve maintenance. Ideal to convey dirty fluids, even with suspended fluids or filaments, thanks to the special design that permits internal valve self-cleaning

4 Locked ball seat carrier: safe disassembly for maintenance with the Easyfit multifunctional handle

2

3

1 4

58

SXE-SSE DN 65÷100PVC-CEASYFIT TRUE UNION BALL CHECK VALVE

SXEICTrue Union Ball Check Valve Easyfit with metric plain socket ends for solvent welding



box type

75 65 16 SXEIC075E 321,40 SXEIC075F 337,22 - 1 05

90 80 16 SXEIC090E 415,22 SXEIC090F 433,34 - 1 05

110 100 16 SXEIC110E 779,49 SXEIC110F 817,82 - 1 03

SXEACTrue Union Ball Check Valve Easyfit with ASTM plain socket ends for solvent welding



box type

2” 1/2 65 16 SXEAC212E 321,40 SXEAC212F 337,22 1 2 04

3” 80 16 SXEAC300E 415,22 SXEAC300F 433,34 1 2 03

4” 100 16 SXEAC400E 779,49 SXEAC400F 817,82 1 2 02

59

E8.

15

Technical specificationsConstruction Bi-directional centric butterfly valveSize range DN 40÷300Nominal pressure Wafer version

DN 40÷50: PN 16 with water at 20° CDN 65÷250: PN 10 with water at 20° CDN 300: PN 8 with water at 20° CLug version DN 65÷200: PN 10 with water at 20° CDN 250÷300: PN 6 with water at 20° C

Temperature range 0 °C ÷ 100 °CCoupling standards Flanging system: EN ISO 15493, DIN 2501, ISO 7005-

1, EN 1092-1, ASTM B16.5 Cl.150

Reference standards Construction criteria: EN ISO 16136, EN ISO 15493Test methods and requirements: ISO 9393Actuator couplings: ISO 5211

Valve material Body: PP-GRDisk: PVC-CStem: STAINLESS steel AISI 420. On request STAINLESS steel AISI 316

Seal material Liner: EPDM, FPM. On request NBRControl options Hand lever operated (DN 40÷200); Gearbox,

pneumatic actuator, electric actuator

FK

The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and long-term reliability. This valve is also equipped with the customisable Labelling System.

BUTTERFLY VALVE

• Interchangeable Disk in PVC-C with through shaft, available in different thermoplastic materials: PVC-U, PP-H, ABS, PVDF

• Overall dimensions of the valve in accordance with standard ISO 5752 (DN 40÷200 Medium Series 25, DN 250÷ 300 Long Series 16) and DIN 3202 K2 and ISO 5752 (DN 65÷200 K2, DN 250÷300 K3)

• Can also be installed as an end line valve, bottom discharge valve or tank dump valve

• Special Lug version PN 10 fully drilled to DIN 2501 or ANSI B16.5 cl.150 with molded-in AISI 316 stainless steel threaded inserts

• Possibility of installing a manual reducer or pneumatic and/or electric actu-ators by applying ISO standard drilling pattern PP-GR flanges. DN 40 ÷ 200 valve fitted with plate with rack in PP-GR. For actuated versions with flange drilled according to ISO 5211 F05, F07, F10

• DN 250÷300 valve, fitted with one-piece top flange in high mechanical strength PP-GR with mounting flange for internal components with drilling according to standard ISO 5211 F10, F12, F14

DN 40÷300

60

1 Ergonomic handle in HIPVC equipped with locking and unlocking device, release, quick operation and graduated adjustment in 10 intermediate positions (DN 40÷200). The operating range, starting from the first few degrees of valve opening, also guarantees extremely low pressure drops

2 Customisable Labelling System: integrated module in the handle, made of a transparent protection plug customisable tag holder using the LSE set (available as accessory). The customisation lets you identify the valve on the system according to specific needs

3 STAINLESS steel square section stem completely isolated from the fluid complying with standard

ISO 5211: DN 40÷65: 11 mm DN 80÷100: 14 mm DN 125÷150: 17 mm DN 200: 22 mm DN 250÷300: 27 mm

4 Body in polypropylene based compound reinforced with fibreglass (PP-GR) resistant to UV rays and characterised by high mechanical strength

5 Drilling pattern with oval slots that allow coupling to flanges according to numerous international standards. The special self-centring inserts in ABS supplied for DN 40÷200 guarantee the correct axial alignment of the valve during installation.

For DN 250÷300 valves, the drilling pattern for the self-centring system is of the traditional type according to DIN and ANSI standards

6 Interchangeable liner with the dual function of forming a hydraulic seal and isolating the body from the fluid

2

3

1

4 5

6

61

FK DN 40÷300PVC-C

BUTTERFLY VALVE

E8.

15

FKOC/LMHand operated Butterfly valve

d-Size DN PN EPDM code € FPM


box type

50 - 1"1/2 40 16 FKOCLM050E 204,46 FKOCLM050F 286,49 1 6 03

63 - 2" 50 16 FKOCLM063E 216,48 FKOCLM063F 303,34 1 6 03

75 - 2"1/2 65 10 FKOCLM075E 240,53 FKOCLM075F 337,04 1 6 02

90 - 3" 80 10 FKOCLM090E 253,15 FKOCLM090F 354,10 1 6 02

110 - 4" 100 10 FKOCLM110E 274,69 FKOCLM110F 378,61 1 5 02

140 - 5" 125 10 FKOCLM140E 365,25 FKOCLM140F 507,81 1 4 02

160 - 6" 150 10 FKOCLM160E 394,20 FKOCLM160F 526,35 1 4 02

225 - 8" 200 10 FKOCLM225E 510,00 FKOCLM225F 682,24 1 2 02

Note: for d75 ÷ d225 NBR primary liner available, see ER Price List

FKOC/LM LUG ISO-DINHand operated Butterfly valve, version Lug ISO-DIN



box type

75 65 10 FKOLCLM075E 332,60 FKOLCLM075F 429,08 1 6 02







62

FK DN 40÷300PVC-CBUTTERFLY VALVE

FKOC/LM LUG ANSIHand operated Butterfly valve, version Lug ANSI



box type

2” 1/2 65 10 FKOALCLM212E 378,61 FKOALCLM212F 475,10 1 6 02

3” 80 10 FKOALCLM300E 421,66 FKOALCLM300F 522,64 1 6 02





Note: for d 2”1/2 ÷ d 8” NBR primary liner available, see ER Price List

FKOC/FMButterfly valve with bare shaft

d - Size DN PN EPDM code € FPM


box type

50 - 1"1/2 40 16 FKOCFM050E 174,15 FKOCFM050F 258,11 1 6 03

63 - 2" 50 16 FKOCFM063E 184,41 FKOCFM063F 273,26 1 6 03

75 - 2"1/2 65 10 FKOCFM075E 204,89 FKOCFM075F 303,66 1 6 02

90 - 3" 80 10 FKOCFM090E 222,72 FKOCFM090F 325,91 1 6 02

110 - 4" 100 10 FKOCFM110E 242,00 FKOCFM110F 348,92 1 5 02

140 - 5" 125 10 FKOCFM140E 321,46 FKOCFM140F 466,96 1 4 02

160 - 6" 150 10 FKOCFM160E 354,86 FKOCFM160F 499,65 1 4 02

225 - 8" 200 10 FKOCFM225E 459,54 FKOCFM225F 648,09 1 2 02

280 *250 10 FKOCFM280E 1.464,14 FKOCFM280F 2.329,85 - 1 08

315 *300 8 FKOCFM315E 1.596,34 FKOCFM315F 2.540,75 - 1 08

10" **250 10 FKOACFM810E 1.464,14 FKOACFM810F 2.329,85 - 1 08

12" **300 8 FKOACFM812E 1.596,34 FKOACFM812F 2.540,75 - 1 08

*ISO-DIN**ANSI B.16.5 cl.150


63

FK DN 40÷300PVC-C

BUTTERFLY VALVE

E8.

15

FKOC/FM LUG ISO-DINButterfly valve with bare shaft, version Lug ISO-DIN



box type

75 65 10 FKOLCFM075E 296,94 FKOLCFM075F 395,69 1 1 04






Note: for d75-d225 NBR primary liner available, see E2 Spare Parts section

FKOC/FM LUG ANSIButterfly valve with bare shaft, version Lug ANSI



box type

2” 1/2 65 10 FKOALCFM212E 342,98 FKOALCFM212F 441,73 1 6 02

3” 80 10 FKOALCFM300E 391,23 FKOALCFM300F 494,39 1 6 02





10” 250 6 FKOALCFM810E 2.400,12 FKOALCFM810F 3.265,84 - 1 08

12” 300 6 FKOALCFM812E 2.553,75 FKOALCFM812F 3.498,16 - 1 08

Note: for d 2”1/2 ÷ d 8” NBR primary liner available, see ER Price List

64

FK DN 40÷300PVC-CBUTTERFLY VALVE

FKOC/RM LUG ISO-DINGearbox operated Butterfly valve, version Lug ISO-DIN



box type

75 65 10 FKOLCRM075E 631,75 FKOLCRM075F 728,26 1 1 04




160 150 10 FKOLCRM160E 881,19 FKOLCRM160F 1.013,32 1 1 02

225 200 10 FKOLCRM225E 1071,98 FKOLCRM225F 1.243,45 1 1 02

Note: for d75÷d225 NBR primary liner available, see ER Price List

FKOC/RMGearbox operated Butterfly valve

d - Size DN PN EPDM code € FPM


box type

75 - 2"1/2 65 10 FKOCRM075E 539,70 FKOCRM075F 636,21 1 1 04

90 - 3" 80 10 FKOCRM090E 550,84 FKOCRM090F 651,79 - 1 04

110 - 4" 100 10 FKOCRM110E 573,86 FKOCRM110F 677,04 - 1 04

140 - 5" 125 10 FKOCRM140E 663,69 FKOCRM140F 806,22 - 1 02

160 - 6" 150 10 FKOCRM160E 692,65 FKOCRM160F 824,76 - 1 02

225 200 10 FKOCRM225E 876,76 FKOCRM225F 1.048,24 - 1 02

250 *250 10 FKOCRM280E 1.676,52 FKOCRM280F 2.542,24 - 1 08

280 *250 10 FKOCRM280E 1.676,52 FKOCRM280F 2.542,24 - 1 08

315 *300 8 FKOCRM315E 1.808,65 FKOCRM315F 2.753,08 - 1 08

10" **250 10 FKOACRM810E 1.676,52 FKOACRM810F 2.542,24 - 1 08

12" **300 8 FKOACRM812E 1.808,65 FKOACRM812F 2.753,08 - 1 08

*ISO-DIN**ANSI B.16.5 cl.150

Note: for d75÷d225 NBR primary liner available, see ER Price List

65

FK DN 40÷300PVC-C

BUTTERFLY VALVE

E8.

15

FKOC/RM LUG ANSIGearbox operated Butterfly valve, version Lug ANSI



box type

2” 1/2 65 10 FKOALCRM212E 677,79 FKOALCRM212F 774,31 1 1 04

3” 80 10 FKOALCRM300E 719,36 FKOALCRM300F 820,31 1 1 04

4” 100 10 FKOALCRM400E 757,22 FKOALCRM400F 860,39 - 1 04

5” 125 10 FKOALCRM500E 907,93 FKOALCRM500F 1.050,44 1 1 02

6” 150 10 FKOALCRM600E 956,92 FKOALCRM600F 1.089,05 - 1 02

8” 200 10 FKOALCRM800E 1.169,21 FKOALCRM800F 1.340,69 - 1 02



Note: for d 2” 1/2 ÷d 8” NBR primary liner available, see ER Price List

66

Technical specificationsConstruction Diaphragm valve with maximized flow rate and

DIALOCK® lockable handwheelSize range DN 15 ÷ 65Nominal pressure PN 10 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Solvent welding: EN ISO 15493, ASTM F 439.

Can be coupled to pipes according to EN ISO 15493, ASTM F 441Thread: ISO 228-1, DIN 2999 Flanging system: ISO 7005-1, EN ISO 15493, EN 558-1,DIN 2501, ANSI B16.5 Cl.150


Valve material Body: PVC-CBonnet and handwheel: PP-GRPosition indicator cap: PVC

Diaphragm material EPDM, FPM, PTFE (on request NBR)Control options Manual control; pneumatic actuator

DK

The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ensuring an optimum linearity of the flow adjustment curve. The DK is extremely compact and very light. The innovative handwheel is equipped with a patented immediate and ergonomic operating that allows it to be adjusted and locked in any position.

DIALOCK® 2-WAY DIAPHRAGM VALVE

• Connection system for solvent weld, threaded and flanged joints • Optimised fluid dynamic design: maximum output flow rate thanks to the

optimised efficiency of the fluid dynamics that characterise the new internal geometry of the body

• Internal components in metal, totally isolated from the fluid and external environment

• Modularity of the range: only 2 handwheel and 4 diaphragm and bonnet sizes for 7 different valve sizes

• Non-rising handwheel that stays at the same height during rotation, equipped with a graduated optical indicator protected by a transparent PVC cap with seal O-Ring

• Bonnet fastening screws in stainless steel protected against the external environment by PE plugs. Absence of metal parts exposed to the external environment to prevent any risk of corrosion

• CDSA (Circular Diaphragm Sealing Angle) system that, thanks to the uni-form distribution of shutter pressure on the diaphragm seal, offers the fol-lowing advantages:- reduction in the tightening torque of the screws fixing the actuator to the

valve body- reduced mechanical stress on all valve components (actuator, body and

diaphragm)- easy to clean valve interior- low risk of the accumulation of deposits, contamination or damage to the

diaphragm due to crystallisation- operating torque reduction

DN 15÷65

67

E8.

151 High visibility graduated

optical position indicator protected by a transparent cap with seal O-Ring

2 Customisation plate: the using the customisation plate. The customisation lets you identify the valve on the system according to specific needs

3 DIALOCK® SYSTEM: innovative handwheel with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in over 300 positions

4 Handwheel and bonnet in high mechanical strength and chemically resistant PP-GR, providing full protection by isolating all internal metal parts from contact with external agents

5 Floating pin connection between the control screw and diaphragm to prevent concentrated loads, improve the seal and extend its lifetime

6 New design of valve body interior: substantially increased flow coefficient and reduced pressure drop. The degree of efficiency reached has also enabled the size and weight of the valve to be reduced

7 Adjustment linearity: the internal profiles of the valve also greatly improve its characteristic curve, resulting in extremely sensitive and precise adjustment along the entire stroke of the shutter

8 Valve anchoring bracket integrated in the body, with threaded metal inserts allowing simple panel or wall mounting using the PMDK mounting plate (supplied as an accessory)

3

4

7

12

6

8

5

68

PVC-CDIALOCK® 2-WAY DIAPHRAGM VALVE

DK DN 15÷65

DKDCDIALOCK® diaphragm valve with male ends for solvent welding, metric series


code € PTFE code € pack n./

boxbox

type20 15 10 DKDC020E 67,62 DKDC020F 128,05 DKDC020P 128,05 1 8 03

25 20 10 DKDC025E 75,80 DKDC025F 139,81 DKDC025P 139,81 1 8 03






DKLDCDIALOCK® diaphragm valve with stroke limiter and male ends for solvent welding, metric series



boxbox

type20 15 10 DKLDC020E 139,72 DKLDC020F 200,15 DKLDC020P 200,15 1 8 03

25 20 10 DKLDC025E 147,90 DKLDC025F 211,91 DKLDC025P 211,91 1 8 03






69


E8.

15

DK DN 15÷65

DKUICDIALOCK® diaphragm valve with female union ends for solvent welding, metric series



boxbox

type20 15 10 DKUIC020E 76,69 DKUIC020F 137,12 DKUIC020P 137,12 1 8 03

25 20 10 DKUIC025E 85,69 DKUIC025F 149,75 DKUIC025P 149,75 1 8 03





DKLUICDIALOCK® diaphragm valve with stroke limiter and female union ends for solvent welding, metric series



boxbox

type20 15 10 DKLUIC020E 148,79 DKLUIC020F 209,22 DKLUIC020P 209,22 1 8 03

25 20 10 DKLUIC025E 157,79 DKLUIC025F 221,85 DKLUIC025P 221,85 1 8 03





70


DK DN 15÷65

DKUFCDIALOCK® diaphragm valve with BSP threaded female union ends

R DN PN EPDM code € FPM


boxbox

type1/2" 15 10 DKUFC012E 83,90 DKUFC012F 144,85 DKUFC012P 143,55 1 8 03

3/4" 20 10 DKUFC034E 92,94 DKUFC034F 158,61 DKUFC034P 156,25 1 8 03

1" 25 10 DKUFC100E 106,08 DKUFC100F 166,37 DKUFC100P 166,78 1 4 04

1" 1/4 32 10 DKUFC114E 144,98 DKUFC114F 238,09 DKUFC114P 234,54 1 4 03

1" 1/2 40 10 DKUFC112E 177,25 DKUFC112F 268,19 DKUFC112P 267,17 1 2 04

2" 50 10 DKUFC200E 212,18 DKUFC200F 365,23 DKUFC200P 336,58 1 4 02

DKLUFC version available on request

DKUAC DIALOCK® diaphragm valve with female union ends for solvent welding, ASTM series



boxbox

type1/2" 15 10 DKUAC012E 83,90 DKUAC012F 144,84 DKUAC012P 143,56 1 8 03

3/4" 20 10 DKUAC034E 92,94 DKUAC034F 158,61 DKUAC034P 156,25 1 8 03

1" 25 10 DKUAC100E 106,07 DKUAC100F 166,37 DKUAC100P 166,78 1 4 04

1" 1/4 32 10 DKUAC114E 144,98 DKUAC114F 238,09 DKUAC114P 234,54 1 4 03

1" 1/2 40 10 DKUAC112E 177,26 DKUAC112F 268,19 DKUAC112P 267,18 1 2 04

2" 50 10 DKUAC200E 212,17 DKUAC200F 365,23 DKUAC200P 336,58 1 4 02

DKLUAC version available on request

71


E8.

15

DK DN 15÷65

DKOCDIALOCK® diaphragm valve with fixed flanges, drilled PN10/16. Face to face according to EN 558-1



boxbox

type20 15 10 DKOC020E 115,58 DKOC020F 176,01 DKOC020P 176,01 1 4 03

25 20 10 DKOC025E 125,99 DKOC025F 189,99 DKOC025P 189,99 1 4 03



50 40 10 DKOC050E 207,20 DKOC050F 299,19 DKOC050P 299,19 - 1 04



DKLOC version available on request

DKOACDIALOCK® diaphragm valve with fixed flanges, drilled ANSI B16.5 cl. 150 #FF



boxbox

type1/2" 15 10 DKOAC012E 115,58 DKOAC012F 176,01 DKOAC012P 176,01 1 4 03

3/4" 20 10 DKOAC034E 125,99 DKOAC034F 189,99 DKOAC034P 189,99 1 4 03

1" 25 10 DKOAC100E 140,68 DKOAC100F 202,00 DKOAC100P 202,00 1 2 04

1" 1/4 32 10 DKOAC114E 174,16 DKOAC114F 267,03 DKOAC114P 267,03 1 2 04

1" 1/2 40 10 DKOAC112E 207,20 DKOAC112F 299,19 DKOAC112P 299,19 - 1 04

2" 50 10 DKOAC200E 260,67 DKOAC200F 413,08 DKOAC200P 386,95 - 1 04

2" 1/2 *65 10 DKOC075E 338,86 DKOC075F 537,00 DKOC075P 503,03 - 1 03

DKLOAC version available on request*Flanges with oval holes matching both DIN and ANSI standards

72

Technical specificationsConstruction Single wear diaphragm valveSize range DN 80 ÷ 100

Nominal pressure PN 10 with water at 20° CPN 6 with water at 20° C (PTFE version)

Temperature range 0 °C ÷ 100 °CCoupling standards Solvent welding: EN ISO 15493, ASTM F 439.


Flanging system: ISO 7005-1, EN ISO 15493, EN 558-1, DIN 2501, ANSI B16.5 Cl.150


Valve material Body: PVC-CBonnet: PP-GRHandwheel: PA-GR

Diaphragm material EPDM, FPM, PTFE (on request NBR)Control options Manual control; pneumatic actuator

VM

The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum.

DIAPHRAGM VALVE

• Connection system for solvent weld, threaded and flanged joints• Compact and lightweight construction• High flow coefficient and minimum pressure drop• Internal components in metal totally isolated from the conveyed fluid,

with anti-friction disk to reduce friction to a minimum• Handwheel that stays at the same height during rotation

DN 80÷100

73

E8.

151 Handwheel in (PA-GR) with high mechanical

strength and ergonomic grip for optimum manageability

2 Metal optical position indicator supplied as standard

3 Full protection bonnet in PP-GR.

Internal circular and symmetrical diaphragm sealing area

4 Diaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replace

5 Threaded metal inserts for anchoring the valve

1

3

5

2

4

74

VM DN 80÷100PVC-CDIAPHRAGM VALVE

VMDCDiaphragm valve with metric spigot ends for solvent welding



boxbox

type90 80 *10 VMDC090E 447,78 VMDC090F 798,99 VMDC090P 618,76 - 1 03

110 100 *10 VMDC110E 633,59 VMDC110F 1.244,91 VMDC110P 844,46 - 1 02

* PTFE: PN 6

VMOCDiaphragm valve with PN 10/16 fixed flanges. Face to face according to EN 558-1



boxbox

type90 80 *10 VMOC090E 598,15 VMOC090F 949,37 VMOC090P 769,13 - 1 02

110 100 *10 VMOC110E 809,87 VMOC110F 1.421,20 VMOC110P 1.020,76 - 1 02

*PTFE PN6

VMOACDiaphragm valve with ANSI B16.5 cl. 150 # FFfixed flanges**

d PN DN EPDM code € FPM


boxbox

type3" *10 80 VMOAC300E 598,15 VMOAC300F 949,37 VMOAC300P 769,13 - 1 02

4" *10 **100 VMOC110E 809,87 VMOC110F 1.421,20 VMOC110P 1.020,76 - 1 02

*PTFE: PN 6**with flanges drilled DIN-ANSI

75

E8.

15Technical specificationsConstruction Compact single wear diaphragm valveSize range DN 12÷15Nominal pressure PN 6 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Solvent welding: EN ISO 15493.



Valve material Body: PVC-CBonnet and handwheel: PA-GR

Diaphragm material EPDM, FPM, PTFEControl options Manual control; pneumatic actuator

CM

The CM is a manually operated diaphragm valve of reduced dimensions and particularly compact structure, ideal for use in confined spaces.

COMPACT DIAPHRAGM VALVE

• Connection system for solvent weld joints• Extremely compact construction• Internal components in metal totally isolated from the conveyed fluid• Valve stem in STAINLESS steel • Compressor with floating diaphragm carrier• Easy to replace diaphragm seal• Corrosion-proof internal components• Innovative CDSA (Circular Diaphragm Sealing Angle) system offering the

following advantages::- uniform distribution of shutter pressure on the diaphragm seal- reduction in the tightening torque of the screws fixing the actuator to the

valve body- reduced mechanical stress on all valve components (actuator, body and

diaphragm)- easy to clean valve interior- low risk of the accumulation of deposits, contamination or damage to the

diaphragm due to crystallisation- operating torque reduction

DN 12÷15

76

1 Handwheel in PA-GR, completely sealed, high mechanical strength with ergonomic grip for optimum manageability

2 Integrated adjustable torque limiter designed to prevent excessive compression of the diaphragm and always guarantee a minimum fluid flow

3 Optical position indicator supplied as standard

4 Bonnet in PA-GR with STAINLESS steel nuts fully protected by plastic plugs to eliminate zones where impurities may accumulate. Internal circular and symmetrical diaphragm sealing area

5 STAINLESS steel bolts, can also be inserted from above

6 Threaded metal inserts for anchoring the valve

1

2

3

6

5

4

77

CM DN 12÷15PVC-C

COMPACT DIAPHRAGM VALVE

E8.

15

CMDCDiaphragm valve with metric plain spigot ends for solvent welding



boxbox

type20 15 6 CMDC020E 96,65 CMDC020F 134,72 CMDC020P 145,75 1 8 04

CMUICDiaphragm valve with unionised metric plain socket ends for solvent welding


code € *PTFE code € pack n./

boxbox

type20 15 6 CMUIC020E 111,49 CMUIC020F 143,10 CMUIC020P 148,64 1 8 04

* Union O-rings in FPM

78

Technical specificationsConstruction Sediment strainerSize range DN 15÷50Nominal pressure PN 16 with water at 20° CTemperature range 0 °C ÷ 100 °CCoupling standards Solvent welding: EN ISO 15493, ASTM F 439. Can be

coupled to pipes according to EN ISO 15493, ASTM F 441Thread: UNI ISO 228-1, DIN 2999, ASTM F 437Flanging system: ISO 7005-1, EN ISO 15493, EN 558-1, DIN 2501, ANSI B.16.5 cl.150

Reference standards Construction criteria: EN ISO 15493Test methods and requirements: ISO 9393Installation criteria: DVS 2204, DVS 2221, UNI 11242

Valve material Body: PVC-CStrainer: PP

Seal material EPDM or FPM

RV

The RV Sediment strainer limits the passage of any solid particles present in the fluid by means of a strainer.

SEDIMENT STRAINER

• Connection system for solvent weld, threaded and flanged joints• Strainer mounted on an easily removed support that facilitates the clean-

ing or replacement• Valve material compatibility (PVC-C) with water conveyance, drinking

water and other food substances according to current regulations• Can be maintained with the valve body installed

DN 15÷50

79

RV DN 15÷50PVC-C

SEDIMENT STRAINER

E8.

15

RVUICSediment strainer with unionised metric plain socket ends for solvent welding



box type

20 15 16 RVUIC020E 63,26 RVUIC020F 72,74 1 20 04

25 20 16 RVUIC025E 68,32 RVUIC025F 80,09 1 10 04

32 25 16 RVUIC032E 89,85 RVUIC032F 103,49 1 10 04

40 32 16 RVUIC040E 102,79 RVUIC040F 128,21 1 6 04

50 40 16 RVUIC050E 130,19 RVUIC050F 151,23 1 6 03

63 50 16 RVUIC063E 169,81 RVUIC063F 190,55 1 4 03

Note: Standard filter screen is in PP-H, pitch 1,5mm

80

CONNECTIONSPVC-CCONNECTIONS FOR BALL AND ANGLE SEAT VALVES

CVDEEnd Connector SDR11 in PE100 PN16 long spigot for butt welding or electrofusion

d to be used with: Code € pack n./box

box type

20 VKD - TKD - VXE - SXE - RV CVDE11020 See E2 price list - - -






75 VKD - VXE - SXE CVDE11075 See E2 price list - - -

90 VKD CVDE11090 See E2 price list - - -

110 VKD CVDE11110 See E2 price list - - -

90 VXE - SXE CVDE11090VXE See E2 price list - - -

110 VXE - SXE CVDE11110VXE See E2 price list - - -

*In caso di installazione su valvole in PP-H l’assieme valvola risulta essere PN10

Flanging Set ISO DIN (PVC-C)Standard: DIN 2501 - EN 1092, face to face according to EN558-1 (VKD only) Set composition: 1 flange, 1 locking ring, 1 nut


box type

20 VKD - TKD - RV SETFLOC020 30,21 1 50 IM004






Note: factory assembled

81

CONNECTIONSPVC-C

CONNECTIONS FOR BALL AND ANGLE SEAT VALVES

E8.

15

Flanging Set ANSI (PVC-C)Standard: ANSI B16.5 cl.150#FF Set composition: 1 flange, 1 locking ring, 1 nut


box type

1/2" VKD - TKD - RV SETFLOAC012 30,21 1 50 IM004

3/4" VKD - TKD - RV SETFLOAC034 34,61 1 37 IM004

1" VKD - TKD - RV SETFLOAC100 41,19 1 29 IM004

1"1/4 VKD - TKD - RV SETFLOAC114 51,79 1 14 IM004

1"1/2 VKD - TKD - RV SETFLOAC112 55,87 1 24 IM003

2" VKD - TKD - RV SETFLOAC200 70,96 1 14 IM003


Flanging Set ISO DIN - ANSI (PVC-C)Standard: EN1092 / DIN2501 and ANSI B16.5 cl.150#FF face to face according to EN558-1 Set composition: 1 socket flange, 1 spigot end connector, 1 nut


box type

75 - 2"1/2 VKD SETFLOC075 98,70 1 - -

90 - 3" VKD SETFLOC090 145,12 1 - -

110 - 4" VKD SETFLOC110 182,14 1 - -


82


ENDICStandard: ISO metric plain socket for solvent welding*


box type

16 VKD - TKD - VXE - SXE - RV ENDIC016 13,56 1 - -







75 VKD - VXE - SXE ENDIC075 40,66 1 - -

90 VKD ENDIC090 59,63 1 - -

110 VKD ENDIC110 74,53 1 - -

90 VXE - SXE ENDIC090VXE 59,63 1 - -

110 VXE - SXE ENDIC110VXE 74,53 1 - -

*One piece

ENDDCStandard: ISO metric plain spigot for solvent welding*


box type

16 VKD - TKD - VXE - SXE - RV ENDDC016 - 1 - -

20 VKD - TKD - VXE - SXE - RV ENDDC020 13,56 1 - -






75 VKD - VXE - SXE ENDDC075 40,66 1 - -

90 VKD ENDDC090 59,63 1 - -

110 VKD ENDDC110 74,53 1 - -

90 VXE - SXE ENDDC090VXE 59,63 1 - -

110 VXE - SXE ENDDC110VXE 74,53 1 - -

*One piece

83

CONNECTIONSPVC-C

CONNECTIONS FOR BALL AND ANGLE SEAT VALVES

E8.

15

ENDFCStandard: BS parallel socket threaded*

R to be used with: Code € pack n./box

box type

3/8" VKD - TKD - VXE - SXE - RV ENDFC038 13,56 1 - -



1" VKD - TKD - VXE - SXE - RV ENDFC100 24,40 1 - -

1"1/4 VKD - TKD - VXE - SXE - RV ENDFC114 27,10 1 - -

1"1/2 VKD - TKD - VXE - SXE - RV ENDFC112 29,81 1 - -

2" VKD - TKD - VXE - SXE - RV ENDFC200 33,89 1 - -

2"1/2 VKD - VXE - SXE ENDFC212 40,66 1 - -

3" VKD ENDFC300 59,63 1 - -

4" VKD ENDFC400 74,53 1 - -

3" VXE - SXE ENDFC300VXE 59,63 1 - -

4" VXE - SXE ENDFC400VXE 74,53 1 - -

*One piece

ENDACStandard: ASTM plain socket for solvent welding*


box type

1/2" VKD - TKD - VXE - SXE - SR - RV ENDAC012 13,56 1 - -

3/4" VKD - TKD - VXE - SXE - SR - RV ENDAC034 23,04 1 - -

1" VKD - TKD - VXE - SXE - SR - RV ENDAC100 24,40 1 - -

1"1/4 VKD - TKD - VXE - SXE - SR - RV ENDAC114 27,10 1 - -

1"1/2 VKD - TKD - VXE - SXE - SR - RV ENDAC112 29,81 1 - -

2" VKD - TKD - VXE - SXE - SR - RV ENDAC200 33,89 1 - -

2"1/2 VKD - VXE - SXE ENDAC212 40,66 1 - -

3" VKD ENDAC300 59,63 1 - -

4" VKD ENDAC400 74,53 1 - -

3" VXE - SXE ENDAC300VXE 59,63 1 - -

4" VXE - SXE ENDAC400VXE 74,53 1 - -

*One piece

84


ENDNCStandard: NPT tapered socked threaded*


box type

1/2" VKD - TKD - VXE - SXE - RV ENDNC012 13,56 1 - -

3/4" VKD - TKD - VXE - SXE - RV ENDNC034 23,04 1 - -

1" VKD - TKD - VXE - SXE - RV ENDNC100 24,40 1 - -

1"1/4 VKD - TKD - VXE - SXE - RV ENDNC114 27,10 1 - -

1"1/2 VKD - TKD - VXE - SXE - RV ENDNC112 29,81 1 - -

2" VKD - TKD - VXE - SXE - RV ENDNC200 33,89 1 - -

2"1/2 VKD - VXE - SXE ENDNC212 40,66 1 - -

3" VKD ENDNC300 59,63 1 - -

4" VKD ENDNC400 74,53 1 - -

3" VXE - SXE ENDNC300VXE 59,63 1 - -

4" VXE - SXE ENDNC400VXE 74,53 1 - -

*One piece

85

CONNECTIONSPVC-C

E8.

15

SPARE AND CONNECTORS FOR TRUE UNION DIAPHRAGM VALVES

Q/BICUnion end for solvent welding metric series*


box type

20 CM - FS - FC - DK - DKL - DKP - DKM - DKD QBIC020 4,79 1 - -

25 FS - FC - DK - DKL - DKP - DKM - DKD QBIC025 5,61 1 - -





*One piece

Q/BFCUnion end BS parallel threaded socket*


box type

1/2" CM - FS - FC - DK - DKL - DKP - DKM - DKD QBFC012 8,16 1 - -

3/4" FS - FC - DK - DKL - DKP - DKM - DKD QBFC034 9,09 1 - -

1" FS - FC - DK - DKL - DKP - DKM - DKD QBFC100 10,67 1 - -

1"1/4 FS - FC - DK - DKL - DKP - DKM - DKD QBFC114 12,49 1 - -

1"1/2 FS - FC - DK - DKL - DKP - DKM - DKD QBFC112 14,10 1 - -

2" FS - FC - DK - DKL - DKP - DKM - DKD QBFC200 19,08 1 - -

*One piece

86

CONNECTIONSPVC-CSPARE AND CONNECTORS FOR TRUE UNION DIAPHRAGM VALVES

Q/BNCUnion end NPT threaded socket*


box type

1/2" CM - FS - FC - DK - DKL - DKP - DKM - DKD QBNC012 8,16 1 - -

3/4" FS - FC - DK - DKL - DKP - DKM - DKD QBNC034 9,09 1 - -

1" FS - FC - DK - DKL - DKP - DKM - DKD QBNC100 10,67 1 - -

1"1/4 FS - FC - DK - DKL - DKP - DKM - DKD QBNC114 12,49 1 - -

1"1/2 FS - FC - DK - DKL - DKP - DKM - DKD QBNC112 14,10 1 - -

2" FS - FC - DK - DKL - DKP - DKM - DKD QBNC200 19,08 1 - -

*One piece

Q/BACUnion end for solvent welding ASTM series*


box type

1/2" CM - VM - MK - FS - FC - BIC QBAC012 8,16 1 - -

3/4" FS - FC - DK - DKL - DKP - DKM - DKD QBAC034 9,09 1 - -

1" FS - FC - DK - DKL - DKP - DKM - DKD QBAC100 10,67 1 - -

1"1/4 FS - FC - DK - DKL - DKP - DKM - DKD QBAC114 12,49 1 - -

1"1/2 FS - FC - DK - DKL - DKP - DKM - DKD QBAC112 14,10 1 - -

2" FS - FC - DK - DKL - DKP - DKM - DKD QBAC200 19,08 1 - -

*One piece

87

CONNECTIONSPVC-C

E8.

15

SPARE AND CONNECTORS FOR TRUE UNION DIAPHRAGM VALVES

Q/BBE-LEnd connector SDR11 in PE100 SDR11 long spigot for butt welding or electrofusion *

d to be used with: Codice € pack Q.tà Cartone

Tipo Cartone

20 CM - DK - DKL - DKP - DKM - DKD QBBEL11020 See EE price list 1 - -

*One piece

88

pack n./box

box type

Q.ty of products per Pack 1

Q.ty of products per Carton Box 22

Carton Box type 03

Please note that pack and n/box quantities could be modified during the validity of the price list

Carton box dimensionsBox Tipe L (mm) P (mm) H (mm) Volume (m3)

00 800 600 400 0,1920

01 590 390 500 0,1151

02 590 390 300 0,0690

03 390 290 300 0,0339

04 390 290 200 0,0226

05 295 195 200 0,0115

08 680 600 280 0,1142

K01 200 200 130 0,0052

K02 200 200 200 0,0080

K03 300 200 200 0,0120

K04 300 260 200 0,0156

K05 400 300 200 0,0240

K06 400 300 250 0,0300

K07 200 150 100 0,0030

K08 300 100 100 0,0030

K09 300 260 300 0,0234

K10 400 200 200 0,0160

K11 400 400 130 0,0208

K12 400 400 250 0,0400

K13 400 260 420 0,0437

K14 400 300 250 0,0300

K15 400 300 300 0,0360

K16 400 400 250 0,0400

K17 400 400 300 0,0480

K18 600 400 300 0,0720

K19 600 400 500 0,1200

K20 800 600 350 0,1680

N01 160 160 350 0,0090

N02 170 170 300 0,0087

N03 190 190 300 0,0108

N04 210 210 300 0,0132

N05 220 220 220 0,0106

N06 240 240 240 0,0138

N07 280 280 170 0,0133

N08 300 300 180 0,0162

N09 350 350 130 0,0159

N10 410 410 150 0,0252

N11 470 470 90 0,0199

PACKAGING INFORMATION

H

P L

89

E8.

15

CONDITIONS OF SUPPLY• INTRODUCTORY STATEMENT: our supplies include the products specified in our Sales confirmation and are gover-

ned by the following Terms and Conditions which the Customer declares to understand and to accept, except for possible derogations stated in an explicity written agreement. In particular all foreign supplies will be governed by INCOTERMS, as defined by the International Chamber of Commerce.

• PRODUCTS: to prevent regrettable misunderstandings, it is advisable to refer to the nomenclature and codes of our catalogues and/or price lists for the identification of our products.The items featuring an asterisk (*), though currently on hand, are not included in our wide range of products for which stock rebuild is scheduled. Therefore our order acceptance depends upon the actual availability of the product.

• PACKAGING: to speed-up delivery and to facilitate warehousing at the Customer’s, we reserve the right to convert the ordered quantities into multiples of the standard packages, as shown in our price list next to each item.

• MINIMUM PURCHASE: for orders involving a net amount of less than € 258,23 for Italy: we will charge € 15,49, € 516,46 for other Countries: we will charge € 30,99 as partial recovery of the handling costs.

• PRICES: prices will be those in force at the time when the order was placed, except in case of forward delivery In the latter case, the prices in force at the time of shipment will be invoiced. Our prices include normal packing; spe-cial packing, if required by the customer will be charged at cost price.

• DELIVERY: delivery is intended ex our Warehouse or Stores and is normally prompt, subject to being unsold The anticipated delivery terms for unavailable items will be indicated, but these wjll be in no way binding or firm. If these delivery schedules cannot be kept for any reason whatsoever, the Purchaser can cancel the order only if the delay exceeds three months from the anticipated delivery date stated in our Order Confirmation. After this time lapse, we too shall be entitled to cancel any orders for items which delayed deliveries due to serious production problems.

• SHIPMENT: if the mode of shipment is not specifically indicated by the Customer, shipment will be effected as dee-med most suitable by us Even if the goods are sold free to destination, their transport will be at the Customer’s risk. Insurance coverage will only be effected if specifically requested by the Customer.

• PAYMENT: the Customer cannot, for any reason whatsoever, defer payments beyond the established dates. Furthermore, we shall be fully entitled to charge interests in arrears on any and all delayed payments. These intere-sts will be based upon the discount rate in force at that time in Italy, plus 3 unit % .

- Unless otherwise specified, payments shall be made by opening of an irrevocable credit at call (for Foreign Countries).

- Unless otherwise specified, payment shall be telegraphic transfer not !ater than 30 days after the date of invoicing (for Italy)

• OWNERSHIP CLAUSE: the products supplied by us will remain our property until fully paid for.• GUARANTEE CLAUSE: we guarantee the good quality of our products in compliance with the standards publicized

in our catalogues. However, our guarantee is limited to the repair and/or replacement of our materials, excluding any other liability, in particular for damages caused in any way whatsoever by utilization of our products. This gua-rantee terminates and will be no longer valid:

- one year after the delivery of the material in question; - if the material is used in other way than the operating conditions specified by us; - if the materials are modified by people not belonging to our Company. On this subject, it is should be noted that

the Purchaser will incur all liabilities provided by Law for any modification of our products. We shall be duly informed about any accidents in which our products are involved and such accidents shall be re-

ported to us immediately and within 24 Hours of their occurence.• CLAIMS: only complaints/claims reaching us by registered ietter within 30 days after invoicing date will be taken

into consideration. In particular, we will not accept any materials returned to us, unless their reshipment - free at our warehouses - has been duly authorized by our appropriate executive.

• DISPUTES: any disputes which cannot be amicably settled or settled by a court of arbitration, shall be handled by the Court of Genoa which will have jurisdiction.

• CUSTOMER SERVICE: our Technical and Commercial Services are available to all our Customers to provide any in-formation on the characteristics and application sectors of our products.

The above General Terms and Conditions may be changed without previous notice.All information contained in this collection are given in good faith and are correct at date of publication thereof.The drawings and photographs contained in this price list are provided for illustrative purposes.

FIP Formatura Iniezione Polimeri Loc. Pian di Parata, 16015 Casella Genova Italy

Tel. +39 010 9621.1

Fax +39 010 9621.209

[email protected]

www.fipnet.com

Documents

PRICE LIST E8 - aliaxis-ui.ataliaxis-ui.at/wp-content/uploads/2017/05/E8.15-PVC-C-Pipes... · PRICE LIST E8.15 PVC-C PIPE, FITTINGS ... C PVC-C LKD portball 3-way DUAL BLOCK® L B