Price List 4242 - Command Access List 4242 TERMS ... Lawrence, LSDA, Marks, Marshal-Best, Molex, Omnia, PBB, PDQ, Ramco, TA West, Trans Atlantic or any of their subsidiaries or

Connection NetworkAgenciesAgencies

www.connectionnetwork.ca

www.CommandAccess.com | www.ConnectionNetwork.ca | Phone: (855) 823-3002 Fax: (905) 823-1249

Page 1

Command Access is not a licensee or affiliated, associated or connected with Allegion, Assa Abloy, Dorma, Stanley Security, Adams Rite, Arrow, Corbin Russwin, Mckinney, Pemko, Rixson, Sargent, Yale, Dor-O-matic, Falcon, Ives, Monarch, Schlage, Von Duprin, Best, Precision, Accurate, AHT, Baldwin, Bommer, Cal Royal, CR Laurence, Design Hardware, Emtek, First Choice, FSB, General Lock, Hager, Jackson, Keedex, Lawrence, LSDA, Marks, Marshal-Best, Molex, Omnia, PBB, PDQ, Ramco, TA West, Trans Atlantic or any of their subsidiaries or affiliates.

Published: March 15, 2016

CONTENTS

Price List 4242

TERMS & CONDITIONS

SECTION

ELECTRIFIED MORTISE LOCKS

ELECTRIFIED EXIT TRIM

ELECTRIFIED CYLINDRICAL LOCKS

EXIT DEVICES & KITS

POWER SUPPLIES

POWER ACCESSORIES

POWER TRANSFER HINGE MODIFICATIONS

DOOR LOOPS

QUICK HINGE CROSS REFERENCE SHEET

POWER TRANSFER HINGES/PIVOTS

2

PAGE

4

18

12

24

31

30

38

41

42

32




Page 2



PRICES: All prices are subject to change without prior notice and are not guaranteed. All prices are per unit (each) unless otherwise specified and do not include sales or local taxes. All shipments will be made at prices prevailing at time of shipment.

EXPEDITE FEE: An additional $25 minimum or 25% of the order will be charged for expediting any order to ship prior to our standard lead time. Expedite lead times are subject to availability and must be approved by the production manager. Please call for approval.

PAYMENT TERMS: The standard credit terms of Connection Network Agencies (herein called CNA) are 2% 10 days net 30. Net 30 means the check shall be receive at CNA on or before 30 days from the date of the invoice. Interest will be charged at the rate of 2% per month on past due accounts.

ACCEPTANCE OF ORDERS AND/OR QUOTATIONS: Possession of prices from CNA does not commit CNA to accept any order. CNA reserves the right to refuse any order and will not be bound to fill any order until it has been accepted by a representative of CNA and confirmed by a written acknowledgement. Quotations are valid for sixty (60) days following the date of the quotation.

OPEN ACCOUNT STATUS: CNA reserves the right to decline or discontinue direct sales to any customer who does not meet an annual minimum sales requirement of 2,500.00 in invoiced purchases.

ACKNOWLEDGEMENTS: An acknowledgement is an exact copy of a customer’s order as entered by CNA and should be verified by the customer. If the acknowledgement does not agree with said customers understanding CNA should be advised within (3) three days or the order will be billed as acknowledged. CNA’s sales terms shall apply irrespective of any special stipulation appearing in customer order, unless specifically acknowledged and accepted by CNA.

RETURNED GOODS: The customer must advise customer service at CNA of merchandise to be returned and a Returned Goods Authorization (RGA) will be issued. CNA will not accept goods returned without an RGA. Full credit against further purchases or a replacement will be made at the option of CNA if upon investigation reveals that goods were shipped in error or if goods are defective in workmanship or material. Otherwise, a restocking fee of not less than (25) twenty-five percent or $25.00 net (whichever is greater) will be charged. All merchandise must be PREPAID AND PROPERLY PACKED. All C.O.D. orders shipped to CNA will be refused. Returned goods must be packed in their original boxes. If product has been installed it cannot be returned. No credit will be given for product not in its original form unless, upon CNA’s inspection, product is found to be defective. If product is returned as defective and is found to be operational, product will be returned to customer (C.O.D.) and no credit will be issued.

MINIMUM CHARGE: No order will be invoiced for less than $50.00 net plus shipping charges.

CHANGES OR CANCELLATIONS: When a special order is accepted and entered, no change can be made and the order is non cancellable. Cancellation or items already packed for shipment will be removed if possible. A twenty-five percent (25%) restocking fee will apply.

CLAIMS OR SHORTAGES: Every possible care is taken in the final examination of packing of goods, and no complaints will be accepted unless made promptly upon receipt of goods. No claim will be allowed for work done by others, consequential damages or other expenditure, and CNA’s understanding to repair or replace defective goods is its only liability. No claim for damage shortage or loss in transit will be accepted unless notice is given in writing to the carrier and to CNA within (10) ten days of receipt of goods.

BACK CHARGES: CNA is not responsible for, does not authorize, and will not accept any charges for the cost of labor or material incurred by anyone other than CNA for any installation, repair, service, or replacement unless incurred with CNA’s prior written consent and agreement.

FREIGHT CHARGES: All goods are invoiced F.O.B. CNA, Mississauga, Ontario.

PRODUCT CHANGES OR CANCELLATIONS: CNA reserves the right to modify or discontinue any price, product, design, function and finish without prior notice. PRODUCT FINISHES: Although CNA modifies products with the finest protective coatings, they do have their limitations. In time, they might deteriorate from extremes in climate, frequency of use, perspiration, or other factors. CNA does not consider excessive wear or tarnishing of the finish as a result of any of the above conditions as a defect. It is considered a normal process, which cannot be avoided. Thus, CNA cannot guarantee product finishes and will not repair or replace finishes under this warranty.

Terms and Conditions




Page 3



LIMITED WARRANTY: CNA warrants that its products are free from defects in workmanship and material under normal use and service. Since CNA does not control product usage, CNA makes no representation as to the degree of security conveyed by the use of any product. This warranty does not cover defects or damage which occur from improper maintenance, improper storage, improper installation, shipping and handling, ordinary wear and tear, misuse, abuse, accidents, unauthorized service, work done by others or consequential damages. CNA will not pay for the cost of repair performed other than in accordance with this warranty. CNA can only perform authorized warranty work at the factory. CNA’s only liability, in tort or contract, whether under this warranty or otherwise, is limited to providing repair or replacement of any product or component part which is proven to be defective as covered by the warranty, within three (3) years after delivery from CNA to the original purchaser. Written notice of a product or component part believed to be defective, as covered by this warranty, should be sent to Connection Network Agencies 2261 Royal Windsor Drive, Unit E, Mississauga, ON L5J 1K5. Include Claimant’s name, address, phone number, and identification of the product, invoice number and date, and a brief description of the defect. Upon receipt of such notice, a CNA representative will contact claimants to where to ship such product or component part, with shipping charges prepaid, for examination and, in the event such examination reveals a defect covered by this warranty, the product will be repaired or replaced. This warranty is in lieu of all other express warranties. To the extent permitted by law, all implied warranties are limited to the duration or this warranty. CNA shall not be liable for any incident or consequential damages.

INNOVATIVE SOLUTIONS: We are committed to finding better, more cost effective ways to furnish the electrified opening. Our commitment to our in-house R&D department supports our goal to provide our customers with the right solution at the right price and the right time.

HUGE INVENTORY: We maintain a large inventory of “ready to be modified” Command Access brand, Allegion, Assa Abloy, Stanley/Best and other manufacturer’s products. Additionally, we probably have a wider variety of hinges than anyone in North America. In fact, we labelled ourselves “the distributor to the distributor”. We often supply locksmith distributors complete locks that cover brands, sizes, and/or finishes that they typically do not, or cannot stock.




Page 4


Published: March 15, 2016M

ORT

ISE

LOCK

SETS ELECTRIFIED MORTISE LOCKSETS

Command Access electrified mortise locks allow for remote keyless access and egress control for heavy use applications where security and safety is critical. Our aesthetically pleasing modifications conceal all parts within the locksets, resulting in electrified locks that are indistinguishable from standard mechanical ones. These locks are available in a variety of makes, models, and finishes. Additionally, we offer multiple functions and voltages to meet your requirements. Some common applications include stairwell doors, lobby entrances, computer rooms, classrooms, interior and exterior doors. Mortise locks may be purchased as complete locks, chassis only or modifications only (of customer’s locks). If you don’t see the brand you need listed, please contact us.

Storeroom – Latchbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt. Inside lever is always free for immediate egress.

Institutional – Latchbolt retracted by key on either side. Switched power allows both levers to retract latchbolt.

Classroom – Latchbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt. Outside lever can be maintained unlocked by key. Inside lever is always free for immediate egress.

Entry w/deadbolt – Latchbolt and deadbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt and deadbolt. Inside lever is always free for immediate egress.

Privacy w/deadbolt - Latchbolt and deadbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt unless deadbolt is thrown. Inside lever is always free for immediate egress. Available in EU (electronically unlocked) function only.

REXKIT-ML - Field Installable (Request to Exit or AE switch) for Schlage L9000 (SCHREXKIT-ML) and Command Access ML1 (CATREXKIT-ML) series mortise locks - sends a signal to alert the control panel that the door is about to be opened by someone intending to exit from within the secured area

REX - Request to Exit or AE switch available (depending on manufacturer) - sends a signal to alert the control panel that the door is about to be opened by someone intending to exit from within the secured area

LBM - Latchbolt Monitor switch available (depending on manufacturer) - sends a signal to the control panel to monitor the position of the latchbolt.

DPS - Door Position switch available (depending on manufacturer) - sends a signal to the control panel to monitor the position of the door.

DBM - Deadbolt Monitor switch available (depending on manufacturer) - sends a signal to the control panel to monitor the position of the deadbolt.

SLM - Solenoid Monitor switch available (depending on manufacturer) - sends a signal to the control panel to monitor the position of the solenoid.

SCM - Security Monitor switch available (depending on manufacturer) – uses a combination of switches to send a signal to the control panel to monitor the position of the door and the solenoid.

A variety of monitoring switches are available for Command Access modified mortise lockset. All switches are SPDT (single pull, double throw) and either mechanical or reed type. Since each manufacturer has different configurations and designs, all switches are Not Applicable on all locks. Please refer to the dedicated specification page for your desired mortise lock model, or consult the factory for switch application verification. With the exception of a few field installable REX kits, all other switches are must be installed at the factory. Here is a list of available switches and their definition.

FUNCTIONS

MORTISE LOCK SWITCH OPTIONS

HO

W T

O O

RDER




Page 5


Published: March 15, 2016H

OW

TO

ORD

ER

SUFFIX

PREFIX

OPTIONS ACC.

ACC.OPTIONS

KEYWAY

KEYWAY

TRIM

TRIM

MODEL + FUNCTION

MODEL + FUNCTION

VOLTAGE

VOLTAGE

FINISH

FINISH

CHASSIS ONLY

EXAMPLES

COMPLETE LOCK

-

ML80EL

ML180EU

-

L3

12

12

-

626

-

S

REX CRU2

-DPS

695

790

-

-

-

-

-

-

-

-

140 90

-

+

+

+

+140-

PART NUMBER

PART NUMBER

LIST

LIST

ML80ELCH12

ML180EU-12-L3-626-S

$695

$790

FOR COMPLETE LOCKS ONLY

MODEL + FUNCTION

PREFIX or SUFFIX

VOLTAGE

OPTIONAL SWITCHES

i-OPTION FOR MORTISE LOCK

TRIM

FINISH (BHMA std)

KEYWAY

ACCESSORIES

Select a model number and add EL (Fail Safe) - Electronically Locked EU (Fail Secure) - Electronically Unlocked

MD - Modification - PREFIXCH - Chassis Only - SUFFIX

12 or 24 Volts must be specified

REX – Request-to-ExitDPS – Door Position SwitchLBM – Latchbolt Monitor

DBM – Deadbolt MonitorSLM – Solenoid MonitorSCM – Security Monitor

For Command Access model #s only. Package includes:• Intelligent auto voltage sensing 12-30 VDC• Current reduction technology built-in• REX switch included

– Tubular – Bent

– Straight – Curved

605 – Polished Bronze606 – Satin Brass612 – Satin Bronze613 – Oil Rubbed Bronze

625 – Polished Chrome626 – Satin Chrome630 – Satin Stainless Steel

S – StandardLC – Less Cylinder

SFIC – Small Format I/CLFIC – Factory Large Format I/C

Faceplates – Storeroom function in specified finishesStrikes – 4-7/8” ASA Strike in specified finishesCRU2 – Current Reduction Unit (new improved circuitry)QC – Molex Connectors

Elements of a Part Number

Additional Options

FOR MODIFICATION, CHASSIS ONLY AND COMPLETE LOCKS

ELECTRIFIED MORTISE LOCKSETS

CH

-

For Complete Locks Only

Storer

oom

Priva

cy w/de

adbo

lt (EU

only)

Deadb

olt M

onito

r (DBM

)

625

LC605

LFIC (

less c

ore)

Institu

tion

Door P

ositio

n (DPS

)

626

Classr

oom

Requ

est-to

-Exit (

REX)

Entra

nce w

/dead

bolt

Latch

bolt M

onito

r (LBM

)

613

S630

SFIC

(less

core)

Electrified Functions Optional SwitchesIn-stock Trim In-stock Finishes Keyway

- = Not Applicable• = Available








Page 6




ML59EL

ML77EL

ML51EL

ML59EU

ML77EU

ML51EU

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

140

140

140

-

-

-

-

140

-

-

140

140

-

-

-

-

-

-

-

-

-

-

-

--

-

(EL) - MODEL

(EL) - MODEL

(EL) - MODEL

(EU) - MODEL

(EU) - MODEL

(EU) - MODEL

MODIFICATION (Customer’s Accurate 9145 Chassis)Specify Voltage and Handing.

MODIFICATION (Customer’s Arrow AM17 or BM17 Chassis)Specify Voltage and Handing.

MODIFICATION (Customer’s Baldwin Chassis)Specify Voltage and Handing. Contact factory or see website for list of chassis that can be modified. Toggles will be removed and customer must obtain new faceplate.

MODIFICATIONadd prefix (MD)



ML35DEL

ML35DEU

ML35WEL

ML35WEU

-

-

-

-

-

-

(EL) - MODEL

(EU) - MODEL

CHASSIS ONLYadd prefix (CH)

MODIFICATION (Customer’s Best 35HEW Chassis) / CHASSIS ONLYSpecify Voltage and Handing. Faceplates & Strikes available in 626 (see page 11 for pricing) must specify handing.


ACCURATE

ARROW

BALDWIN

BEST 35

-

-

140 140 140Call for Pricing

Call for Pricing

Call for Pricing

Call for Pricing

For Chassis Only, see Command Access Retrofit section on pg. 8

-

-


Storer

oom

Priva

cy w/de

adbo

lt (EU

only)

Deadb

olt M

onito

r (DBM

)

625

LC605

LFIC (

less c

ore)

Institu

tion

Door P

ositio

n (DPS

)

626

Classr

oom

Requ

est-to

-Exit (

REX)

Entra

nce w

/dead

bolt

Latch

bolt M

onito

r (LBM

)

613

S630

SFIC

(less

core)






Page 7




ML45DEL

ML45DEU

ML45WEL

ML45WEU

-

-

ML453WEL

ML453WEU

-

-

690 690- 740 -

1295 1295- - -

FAIL SAFE (EL)

FAIL SECURE (EU)

CHASSIS ONLYadd suffix (CH)


COMPLETE LOCKincludes In-stock Trim

3H3M

15H15M

16H16M

14H14M -- - -

TS SS GS JS - -

140 140 140 140

MODIFICATION (Customer’s Best 45HD Chassis) / CHASSIS ONLY / COMPLETE LOCKSpecify Voltage and Handing. Faceplates & Strikes available in 626 (see page 11 for pricing).

BEST 45

ML8080EL

ML8080EU

-

-

-

-

ML8053EL

ML8053EU

-

-

900 -- 960 -

MODIFICATION (Customer’s Cal-Royal M8080 & M8453 Chassis) / COMPLETE LOCKSpecify Voltage and Handing.

CAL ROYAL

-

-

-

-

-

-

-

-

140 140



Call for Pricing

Call for Pricing

ML03EL

ML05EU

ML01EL

ML04EU

-

-

-

-

ML5610EL

ML5610EU

- - -

-

-

-

-

-

140 140 140

MODIFICATION (Customer’s Corbin ML2057 Chassis) / CHASSIS ONLY / COMPLETE LOCKSpecify Voltage and Handing. Faceplates & Strikes available in 613, 625, 626 (see page 11 for pricing)

CORBIN RUSSWIN


FAIL SAFE (EL)

FAIL SECURE (EU)



FAIL SAFE (EL)

FAIL SECURE (EU)





Call for Pricing

Call for availabilityCall for Pricing


Storer

oom

Priva

cy w/de

adbo

lt (EU

only)

Deadb

olt M

onito

r (DBM

)

625

LC605

LFIC (

less c

ore)

Institu

tion

Door P

ositio

n (DPS

)

626

Classr

oom

Requ

est-to

-Exit (

REX)

Entra

nce w

/dead

bolt

Latch

bolt M

onito

r (LBM

)

613

S630

SFIC

(less

core)






Page 8




L3 L6 L17 -

LPM110E

1375

1035

FAIL SECURE (EU)

CHASSIS ONLY / COMPLETE LOCK24V Only. Faceplates & Strikes available in 626, 630. Field Hvandable, retrofits to Schlage L-series compatible trim. Must use PS1, PS5-4, or PS5-6 power supplies.



COMMAND ACCESS LATCH PULLBACK

140




140

LPM180EU

1375

1035

LPM182EU

1390

1055

SpecialityFunctions

(ask for details)

LPM183ELLPM185ELLPM187EL

LPM184EULPM186EULPM188EU

1675

1348

1675

1348

L7

BEST 35 Series

Cal Royal 8000 Series

Corbin Russwin 2000 Series

Falcon MA Series

Schlage L9000 series

ML105EU

ML181EU

ML104EU

ML121EU

-

-

-

ML1681EU

605 630- 630 -

FAIL SECURE (EU)

FAIL SECURE (EU)


-

-

140 140 140

COMMAND ACCESS ML1 SERIES RETROFIT CHASSIS ONLYSpecify Voltage and Handing. Includes 626 faceplate & strike (other finishes available upon request). Available with i-Option.

COMMAND ACCESS


ML1 RETROFIT LOCKS

ML135DEL ML135WEL- - -FAIL SAFE (EL) -

ML135DEU ML135WEU- - -FAIL SECURE (EU) -

ML18080EL ML18082EL- - -FAIL SAFE (EL) -

ML18080EU ML18082EU- - -FAIL SECURE (EU) -

ML103EL ML101EL

-

- -FAIL SAFE (EL) -

ML151EL ML111EL- ML1651ELFAIL SAFE (EL)

--

-

-

-

L6 L17 -

ML180EL

ML180EU

ML182EL

ML182EU

ML170EL

ML170EU

ML1480EL

ML1480EU

ML1485EL

ML1485EU

790 810810 830 910

450 470470 510 570

FAIL SAFE (EL)

FAIL SECURE (EU)


Specify Voltage. Field handable, Fail Safe/Fail Secure. LFIC = Schlage compatible housing. Available with i-Option.

CHASSIS ONLYadd suffix (CH) -

-

140 140 140 140


NOTES: 1. ML1480/85 - REX & DBM only. 2. ML170 - REX only.

COMMAND ACCESS ML1 SERIES COMPLETE LOCK RETROFIT

-

-

-

-

-

-

-

- -

Passage Storeroom Institutional







L3* L7*

* Limited availability, please call to confirm stock.


Storer

oom

Priva

cy w/de

adbo

lt (EU

only)

Deadb

olt M

onito

r (DBM

)

625

LC605

LFIC (

less c

ore)

Institu

tion

Door P

ositio

n (DPS

)

626

Classr

oom

Requ

est-to

-Exit (

REX)

Entra

nce w

/dead

bolt

Latch

bolt M

onito

r (LBM

)

613

S630

SFIC

(less

core)






Page 9




ML370EL

ML80EL

ML371EU

ML80EU

ML372EL

ML82EL

ML373EU

ML82EU

-

ML70EL

ML337EU

ML70EU

-

ML480EL

-

ML480EU

-

-

-

ML485EU

870

695

920

740

925

695

-

740

-

740

1535

1575

1550

1590

LNJ

03

LNL

06

LNB

07

LNP

17

1550

1575

-

1590

-

1590

-

-

-

-

-

-

140 140 140

140 140 140 140

MODIFICATION (Customer’s Sargent 8237 Chassis) / CHASSIS ONLY / COMPLETE LOCKSpecify Voltage. Faceplates & Strikes available in 613, 625, 626 (see page 11 for pricing). Fire link is removed for LBM.

MODIFICATION (Customer’s Schlage L9050/9070 & L9453 Chassis) / CHASSIS ONLY / COMPLETE LOCKSpecify Voltage and Handing. Faceplates & Strikes available in 605, 606, 612, 613, 625, 626 & 630.

NOTES: 1. ML480 - REX & DBM only. 2. ML70 - REX only

SARGENT

SCHLAGE



ML51EL

ML81EU

ML11EL

ML21EU

-

-

ML651EL

ML681EU

-

-

MODIFICATION (Customer’s Falcon MA561 Chassis & MA531 w/ 451 faceplate) / CHASSIS ONLYSpecify Voltage and Handing. Faceplates & Strikes available in 626 (see page 11 for pricing). Toggles will be removed and customer must obtain new faceplate.

FALCON

-

-

140 140 140 140


FAIL SAFE (EL)

FAIL SECURE (EU)



FAIL SAFE (EL)

FAIL SECURE (EU)




FAIL SAFE (EL)

FAIL SECURE (EU)





Call for Pricing

+65

Call for Pricing

Call for Pricing





*Fire link is removed for LBM.

*

*


Storer

oom

Priva

cy w/de

adbo

lt (EU

only)

Deadb

olt M

onito

r (DBM

)

625

LC605

LFIC (

less c

ore)

Institu

tion

Door P

ositio

n (DPS

)

626

Classr

oom

Requ

est-to

-Exit (

REX)

Entra

nce w

/dead

bolt

Latch

bolt M

onito

r (LBM

)

613

S630

SFIC

(less

core)






Page 10




Command Access ML1 series mortise lock field installable REX (Request to Exit) kit.

DESCRIPTION

Schlage L-series mortise lock field installable REX (Request to Exit) kit.

Request to Exit Switch installed in mortise lock

Latchbolt Monitoring Switch installed in mortise lock

Door Position Switch installed in mortise lock

Request to Exit Switch with Bypass option to shunt the signal during unlocked cycles installed in mortise lock

Deadbolt Monitoring Switch installed in mortise lock

Solenoid Monitor Switch installed in mortise lock

Security Monitor Switch installed in mortise lock

$140

LIST

$140

$205

$140

$140

$140

$140

$140

$205

CATREXKIT-ML

PART

SCHREXKIT-ML

RXBP

REX

LBM

DBM

DPS

SLM

SCM

SWITCH OPTIONS FOR MORTISE LOCKS

ML90EL

ML91EU

ML94EL

ML95EU

-

-

-

-

-

-

995 1020- - -

MODIFICATION (Customer’s Yale 8808 Chassis) / CHASSIS ONLYSpecify Voltage and Handing. Faceplates & Strikes available in 613, 625, 626 (see page 11 for pricing). Fire link is removed for LBM.

YALE

-

-

-

-

140 140 140


FAIL SAFE (EL)

FAIL SECURE (EU)



Call for Pricing








Page 11




Storeroom function in specified finishes

DESCRIPTION

4-7/8” ASA Strike in specified finishes

Current Reduction Unit (now non-polarized)

8 or 12-pin Molex Connectors added to lockset to retrofit ElectroLynx® or Allegion Connect ®

Bridge Rectifier w/ 5’ Lead

$65

LIST

$65

$90

$30

$110

Faceplate

PART

Strike

CRU2

QC

BR5

Door Cord QC

ACCESSORIES & REPLACEMENT FOR MORTISE LOCKS

$55

Mortise Lock Replacement Solenoids (Specify brand, EL or EU and voltage)

Bridge Rectifiers w/ 12” Lead

$235

$25

SOL-ML

BR1





3-5’ Door Cord to connect a 8 or 12 -pin prepped locking device to a 8 or 12 -pin prepped power transfer product.

ElectroLynx® is a registered trademark of Assa Abloy

* For special length, please call to quote.

*

Allegion Connect® is a registered trademark of Allegion

NOTES




Page 12


Published: March 15, 2016CY

LIN

DRI

CAL

LOCK

S ELECTRIFIED CYLINDRICAL LOCKSCommand Access electrified cylindrical locks allow for remote keyless access and egress control for standard commercial use applications where security and safety is critical. Our aesthetically pleasing modifications conceal all parts within the locksets, resulting in electrified locks that are indistinguishable from standard mechanical ones. These locks are available in a variety of makes, models, and finishes. Additionally, we offer multiple functions and voltages to meet your requirements. Some common applications include computer

rooms, meeting rooms, classrooms and interior doors. Cylindrical locks may be purchased as complete locksets or as modifications only (of customers’ locks). If you don’t see the brand you need listed, please contact us.

Storeroom – Latchbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt. Inside lever is always free for immediate egress.

Classroom – Latchbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt. Outside lever can be maintained unlocked by key. Inside lever is always free for immediate egress.

Storeroom Clutching – Latchbolt and deadbolt retracted by key outside or lever inside. Switched power allows outside lever to retract latchbolt and deadbolt. Inside lever is always free for immediate egress.

REX - Request to Exit or AE switch available (depending on manufacturer) - sends a signal to alert the control panel that the door is about to be opened by someone intending to exit from within the secured area

REXKIT-CL - Field Installable REX (Request to Exit ) switch kits are available for a few cylindrical locks. Each kit includes the switch assembly and all necessary items needed for quick field installation. When utilized, the REX switch sends a signal to alert the control panel that the door is about to be opened by someone intending to exit from within the secured area.

All Command Access modified cylindrical lever locks are available with REX monitor switches. All switches are SPDT (single pull, double throw) and either mechanical or reed type. With the exception of a few field installable REX kits, all other REX switches must be installed at the factory. Here is a list of available switches and their definition.

FUNCTIONS

CYLINDRICAL LOCK SWITCH OPTIONS

HO

W T

O O

RDER




Page 13



ELECTRIFIED CYLINDRICAL LOCKSH

OW

TO

ORD

ER

PREFIX

PREFIX

OPTIONS ACC.

ACC.OPTIONS

KEYWAY

KEYWAY

TRIM

TRIM

MODEL + FUNCTION

MODEL + FUNCTION

VOLTAGE

VOLTAGE

FINISH

FINISH

MODIFICATION ONLY

EXAMPLES

COMPLETE LOCK

MD

-

CLN77EL

CL180EU

-

L6

12

24

-

613

-

S

REX CRU2

-REX

550

-

-

-

-

-

-

-

-

140 90

-

+

+

+

+140

-

-

PART NUMBER

PART NUMBER

LIST

LIST

MD-CL77EL-12

CL180EU-24-L6-613-S

$550

FOR COMPLETE LOCKS ONLY

MODEL + FUNCTION

PREFIX

VOLTAGE

OPTIONAL SWITCHES

TRIM

FINISH (BHMA std)

KEYWAY

ACCESSORIES


MD - Modification


REX – Request-to-Exit



605 – Polished Bronze606 – Satin Brass612 – Satin Bronze

613 – Oil Rubbed Bronze625 – Polished Chrome626 – Satin Chrome

S – StandardLC – Less Cylinder

SFIC – Small Format I/CLFIC – Factory Large Format I/C

CRU2 – Current Reduction Unit (new improved circuitry)QC – Molex Connectors


Additional Options

FOR MODIFICATION AND COMPLETE LOCKS

i-OPTION FOR CYLINDRICAL LOCKFor Command Access model #s only. Package includes:• Intelligent auto voltage sensing 12-30 VDC• Current reduction technology built-in• REX switch included

Call for Price


Storer

oom

625

LC LFIC (

less c

ore)

Storer

oom Cl

utchin

g

626

Classr

oom

Requ

est-to

-Exit (

REX)

613

S SFIC

(less

core)

Electrified Functions SwitchIn-stock Trim In-stock Finishes Keyway





Page 14



Page 14




CL77EL

CL93DEL

-

CL78EU

CL93DEU

-

-

-

CLCR05EL

-

-

CLCR05EU

-

-

-

-

-

-

1035

-

-

605

- - 15C15D - 14C

14D - - -

TVB GN AT SPA - --

(EL) - MODEL

(EL) - MODEL

(EL) - MODEL

(EU) - MODEL

(EU) - MODEL

(EU) - MODEL



MODIFICATION ONLY (Customer’s Arrow Q12 or H12)Specify Voltage.

MODIFICATION (Customer’s Best 93K Series) / COMPLETE LOCKSpecify Voltage. Typically Stocked Finishes - 626 (see page 18 for pricing). C & D Roses Available

MODIFICATION (Customer’s Cal Royal CGN05) / COMPLETE LOCKSpecify Voltage. Typically Stocked Finishes - 605, 612, 613, 625, 626 (see page 18 for pricing)




140

140

140

ARROW

BEST

CAL ROYAL


Call for Pricing

Call for Pricing

Call for Pricing

For Complete Locks Only-

-

CL180EL

CL180EU

-

-

- L6 L7 L17 - -- 495-

(EL) - MODEL

(EU) - MODEL

COMPLETE LOCKSpecify Voltage. Typically Stocked Finishes - 613, 626 (see page 18 for pricing). Available with i-Option.


140

COMMAND ACCESS




Storer

oom

625

LC LFIC (

less c

ore)

Storer

oom Cl

utchin

g

626

Classr

oom

Requ

est-to

-Exit (

REX)

613

S SFIC

(less

core)






Page 15



Page 15


-

-

CL03EL

CL05EU

-

-

- 1030- - NZD - PZD -

(EL) - MODEL

(EU) - MODEL


MODIFICATION (Customer’s Corbin CL3357) / COMPLETE LOCKSpecify Voltage. Typically Stocked Finishes - 613, 625, 626 (see page 18 for pricing)


140

CORBIN RUSSWIN


Call for Pricing








CLC5400EL

-

CL370EL

CLC5400EU

-

CL371EU

-

CLFEL

-

-

CLFEU

-

-

-

-

-

-

-

1030 -- - LL LB LP -

(EL) - MODEL

(EL) - MODEL

(EL) - MODEL

(EU) - MODEL

(EU) - MODEL

(EU) - MODEL


MODIFICATION ONLY (Customer’s LSDA C5400 grade one lock)Specify Voltage.

MODIFICATION ONLY (Customer’s Marks 195F)Specify Voltage.

MODIFICATION (Customer’s Sargent 10G04) / COMPLETE LOCKSpecify Voltage. Typically Stocked Finishes - 613, 625, 626 (see page 18 for pricing)




140

140

140

LSDA

MARKS

SARGENT

Call for Pricing

Call for Pricing

Call for Pricing


Storer

oom

625

LC LFIC (

less c

ore)

Storer

oom Cl

utchin

gExi

t

626

Classr

oom

Requ

est-to

-Exit (

REX)

613

S SFIC

(less

core)






Page 16





CLN80EL

CLN80EU

CLN96EL CLN12EL

CLN96EU CLN12EU

CLN70EL

CLN70EU

995 1030 965995 - RHO ATH SPA

(EL) - MODEL

(EU) - MODEL


MODIFICATION (Customer’s Schlage ND12PD, ND70PD, ND80PD, ND94PD, ND96PD) / COMPLETE LOCKSpecify Voltage. Typically Stocked Finishes - 605, 606, 612, 613, 625, 626 (see page 18 for pricing). Classic ‘C’ type keyway comes standard.

Add $55 list for Schlage original C & Everest C123.Add $25 for Control key.N/C for JD (LFIC) .

Add $68 list for RD & TD (No upcharge for JD).Athens Handle only available in PD 626.


140

SCHLAGE



Call for Pricing

+65 +65*

Request to Exit Switch installed in cylindrical locks

DESCRIPTION

Schlage ND series Anti-Rotation Plate with Request to Exit (REX) switch installed

$140

LIST

$140

$140

REX

PART

SCHREXKIT-CL

CATREXKIT-CL

SWITCH OPTIONS FOR CYLINDRICAL LOCKS





Command Access Inside Spring Cage with Request to Exit (REX) switch installed



DESCRIPTION

Current Reduction Unit (now non-polarized)

Bridge Rectifier w/ 5’ Lead

LIST

$90

$30

PARTCRU2

BR5

ACCESSORIES & REPLACEMENT FOR CYLINDRICAL LOCKS

$55

Factory Installed only- Cylindrical Lock Replacement Solenoids (Specify brand, EL or EU and voltage) **Cannot be field installed

Bridge Rectifiers w/ 12” Lead

$235

$25

SOL-CL

BR1

QC

3-5’ Door Cord to connect a 8 or 12 -pin prepped locking device to a 8 or 12 -pin prepped power transfer product. $110Door Cord QC *








Page 17



NOTES




Page 18


Published: March 15, 2016EX

IT T

RIM ELECTRIFIED EXIT TRIM

Our exit device trim modifications are perfect for stairwell conditions or applications where electric pullback of the exit device’s latchbolt is cost prohibitive or not required. This is especially practical in applications where fire/life safety codes require a “fail safe” condition which is not an option with electrified latch pullback devices. Because the current draw is quite low there is no need for a more expensive power supply to provide the surge current.

STOREROOM (EL / fail safe) – Outside lever locked electronically. Switched power allows outside lever to retract the latch(es). Depending on the model, the outside key either momentarily unlocks outside lever to retract latch(es) or momentarily retracts the latch(es) directly. Inside push pad is always free for immediate egress.

STOREROOM (EU / fail secure) – Outside lever unlocked (EU) electronically. Switched power allows outside lever to retract latch(es). Depending on the model, the outside key either momentarily unlocks outside lever to retract latch(es) or momentarily retracts the latch(es) directly. Inside push pad is always free for immediate egress.

Most Command Access electrified/modified exit trims are available with an REE (Request to Enter) switch. This switch is a SPDT (single pull, double throw) switch that sends a signal to alert the control panel that the door is about to be opened by someone intending on entering a secured area. This switch must be installed at the factory.

FUNCTIONS

EXIT TRIM SWITCH OPTIONS

HO

W T

O O

RDER




Page 19



ELECTRIFIED EXIT TRIMH

OW

TO

ORD

ER

PREFIX

PREFIX

OPTIONS

OPTIONS

KEYWAY

KEYWAY

TRIM

TRIM

MODEL + FUNCTION

MODEL + FUNCTION

VOLTAGE

VOLTAGE

FINISH

FINISH

MODIFICATION ONLY

EXAMPLES

COMPLETE TRIM

MD

-

CR22EL

ET25EU

-

L6

12

12

-

626

-

-

REE

-

call for price

680

-

-

-

-

-

-

-

-

140+

+

+

+-

-

-

PART NUMBER

PART NUMBER

LIST

LIST

MD-CR22EL-12

ET25EU-12-L6-626

$680

FOR COMPLETE TRIM ONLY

MODEL + FUNCTION

PREFIX

VOLTAGE

OPTIONAL SWITCHES

TRIM

FINISH (BHMA std)

KEYWAY


MD - Modification


REE – Request-to-Enter



605 – Polished Bronze606 – Satin Brass612 – Satin Bronze613 – Oil Rubbed Bronze

625 – Polished Chrome626 – Satin Chrome630 – Satin Stainless Steel

Cylinders Not Included with Exit Trim


Additional Options

FOR MODIFICATION AND COMPLETE EXIT TRIM

ACCESSORIESCRU2 – Current Reduction Unit (new improved circuitry)QC – Molex Connectors


Storer

oom w

/ key

overr

ide

625

628

626

Storer

oom w

/o ke

y over

ride

S LC Requ

est-to

-Enter

(REE

)

613

313

Electrified Functions Keyway SwitchIn-stock Trim


In-stock Finishes




Page 20



CR22EL

CR77EL

CR98EL

CR22EU

CR77EU

CR98EU

-

-

-

-

-

-

(EL) - MODEL

(EL) - MODEL

(EL) - MODEL

(EU) - MODEL

(EU) - MODEL

(EU) - MODEL




•

•

•

•

•

•

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

140

140

140

For Complete Trims Only



MODIFICATION ONLY (Customer’s Cal Royal NESC22 Trim)Specify Voltage and Handing.



CAL ROYAL

CAL ROYAL

CAL ROYAL


FAL551

FAL581

-

-

(EL) - MODEL

(EU) - MODEL


•

•

-

-

-

-

-

- 140


MODIFICATION ONLY (Customer’s Falcon 512 Trim)Specify Voltage and Handing.

FALCON

Call for Pricing

Call for Pricing

Call for Pricing

Call for Pricing


Storer

oom w

/ key

overr

ide

625

628

626

Storer

oom w

/o ke

y over

ride

S LC Requ

est-to

-Enter

(REE

)

613

313



In-stock Finishes




Page 21




ET25EL

ET25EU

-

-

680 -

FAIL SAFE (EL)

FAIL SECURE (EU)

COMPLETE TRIMincludes In-stock Trim

-

-

- 140

For Complete Exit Trim Only

COMPLETE TRIM FOR COMMAND ACCESS PD26 SVR & RIM ONLYSpecify Voltage. Schlage C ccompatible cylinder included. Retrofits Cal-Royal 7700RIM/SVR, Von Duprin 98/99 RIM/CVR/SVR

L3* L6 L7* L17* - - -

COMMAND ACCESS ET25

*Limited Availability

ENTRANCE NIGHT LATCH

545 285

RIM/SURFACE VERTICAL

COMPLETE TRIMincludes In-stock Trim -


COMPLETE TRIM FOR COMMAND ACCESS PD25 Schlage C ccompatible cylinder included. Retrofits Cal-Royal 7700 series

L3* L6 L7* L17* - - -

COMMAND ACCESS MECHANICAL ET26

*Limited Availability

ET26R/SVR

FUNCTION

ET26NL

ET16RIM

ET16CVR

-

-

495 -COMPLETE TRIM

includes In-stock Trim

-

-

-


COMPLETE TRIM FOR COMMAND ACCESS PD15 CVR & RIMSpecify Handing. Cylinder not included

- L6 - - - - -

COMMAND ACCESS MECHANICAL ET16

ET15ELCVR

ET15ELRIM

ET15EUCVR

ET15EURIM

-

-

-

-

680 -

FAIL SAFE (EL)

FAIL SAFE (EL)

FAIL SECURE (EU)

FAIL SECURE (EU)


-

-

-

-

- 140


COMPLETE TRIM FOR COMMAND ACCESS PD16 CVR & RIMSpecify Voltage and Handing. Cylinder not included

- L6 - - - - -

COMMAND ACCESS ET15

-

140

140

2

+15

2- Only available for Entrrance Functions

ENTRANCE NIGHT LATCHFUNCTION

RIM

CONCEALED VERTICAL ET26CVR ET26NL

MORTISE ET26MORT ET26NL

1- Retrofits Von Duprin 98/99 RIM/CVR/SVR

1

CONCEALED VERTICAL

-

-

-

-


Storer

oom w

/ key

overr

ide

625

628

626

Storer

oom w

/o ke

y over

ride

S LC Requ

est-to

-Enter

(REE

)

613

313



In-stock Finishes

PRECISION




Page 22



SGT700EL

V23EL

PH49EL

SGT700EU

V23EU

PH49EU

-

-

PH49EL

-

-

PH49EU

1140 -

(EL) - MODEL

(EL) - MODEL

(EL) - MODEL

(EU) - MODEL

(EU) - MODEL

(EU) - MODEL





•

•

•

•

•

•

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

140

140

140




MODIFICATION ONLY (Customer’s Sargent 713, 715, 716, 734 Trim)Specify Voltage and Handing.

MODIFICATION ONLY (Customer’s Von Duprin 230L Trim) / COMPLETE TRIM (CAT Modified Von Duprin 230L Trim)Specify Voltage and Handing.

MODIFICATION (Customer’s Precision 4900 Series Trim) / COMPLETE TRIM (CAT Modified Precision 4908 Trim)Specify Voltage and Handing. Cylinder not included

- 06 - - - - - • •

SARGENT

VON DUPRIN


Call for Pricing

Call for Pricing

Call for Pricing

H45CEEL

H45CEEU

-

-

(EL) - MODEL

(EU) - MODEL


•

•

-

-

-

-

-

- 140


MODIFICATION ONLY (Customer’s Hager 45CE Trim)Specify Voltage and Handing.

HAGER

Call for Pricing


Storer

oom w

/ key

overr

ide

625

628

626

Storer

oom w

/o ke

y over

ride

S LC Requ

est-to

-Enter

(REE

)

613

313



In-stock Finishes

VON DUPRIN




Page 23



V96EL

V96EU

V96EL

V96EU

1320 1320

(EL) - MODEL

(EU) - MODEL



•

•

-

-

-

-

-

-

-

-

140


MODIFICATION (Customer’s Von Duprin 996L Trim) / COMPLETE TRIM (CAT Modified Von Duprin 996L Trim)Specify Voltage and Handing. Consult factory for additional finishes and modification of discontinued 992L Trim.

03 06 07 17 • • • • -

Replacement Solenoids for Exit Trim (Specify brand, EL or EU and voltage)

DESCRIPTION

Bridge Rectifier for Exit Trim

Current Reduction Unit (new improved circuitry)

$235

LIST

$30

$90

SOL-ET

PART

BR5

CRU2

ACCESSORIES FOR EXIT TRIM


Call for Pricing

V3EL

V3EU

V3EL

V3EU

(EL) - MODEL

(EU) - MODEL


•

•

-

-

-

-

-

- call


MODIFICATION ONLY (Customer’s Von Duprin 360/370 BE Trim)Specify Voltage and Handing.

VON DUPRIN

Call for Pricing



QC

3-5’ Door Cord to connect a 8 or 12 -pin prepped locking device to a 8 or 12 -pin prepped power transfer product. $110Door Cord QC

$55

*





LPEU (FAIL SECURE) - Exit device latch(es) retracted with switched power allowing for outside access or auto operator integration. Without power, the device and latch(es) are secured (locked). Inside push pad always allows for free egress.

RIM - Rim type exit device with surface mounted push pad and one point latching.

SVR - Surface Vertical Rod type exit device with surface mounted push pad and two-point latching.

CVR - Concealed Vertical Rod type exit device with surface mounted push pad and two-point locking.

MORTISE - Mortise pocket installed exit device with surface mounted push pad and one-point locking.

REX - Request to Exit switch - sends a signal to alert the control panel that the door is about to be opened by someone intending to exit from within the secured area.

LBM - LatchBolt Monitor switch - sends a signal to the control panel to monitor the position of the latchbolt.

REXKIT-ED - Field Installable REX (Request to Exit ) switch kits are available for a variety of exit devices. Each kit includes the switch assembly and all necessary items needed for quick field installation. When utilized, the REX switch sends a signal to alert the control panel that the door is about to be opened by someone intending to exit from within the secured area.

LBMKIT-ED - Field Installable LBM (LatchBolt Monitor) switch kits are available for a variety of exit devices. Each kit includes the switch assembly and all necessary items needed for quick field installation. When utilized, the LBM sends a signal to the control panel to monitor the position of the latchbolt.

Command Access offers a variety of factory and field installable exit device monitoring switches. Each mechanical switch is SPDT (single pull, double throw) and capable of greater than 1 amp @ 24 volts. Common applications employ these switches to monitor egress and device positioning to ensure the most secure assembly possible.

FUNCTIONS

TYPES

EXIT DEVICE SWITCH OPTIONS

Factory Installed Switches

Field Installable Switches

Our electrified latch pullback modification of storefront & architectural exit devices allows for remote keyless access control in high occupancy / high traffic conditions where exit devices are required. Common applications include conditions such as hospitals, airports, schools, churches and they are commonly specified in applications that require automatic door openers. The device may be continuously energized allowing for a push/pull condition if desired. We stock many types of Command Access and other manufacturer’s exit devices. These devices can be factory electrified along with a variety of field electrification kits available.




Page 24


Published: March 15, 2016EX

IT D

EVIC

ES &

KIT

S STOREFRONT & ARCHITECTURAL ELECTRIFIED EXIT DEVICES & KITS

HO

W T

O O

RDER




Page 25



ELECTRIFIED EXIT DEVICES & KITSH

OW

TO

ORD

ER

PREFIX

PREFIX

OPTIONS

OPTIONS

SIZE

SIZE

MODEL + FUNCTION

MODEL + FUNCTION

VOLTAGESUFFIX

VOLTAGESUFFIX

FINISH

FINISH

MODIFICATION ONLY

EXAMPLES

MOTOR DRIVEN KIT

MD

KEY: MD = MODIFICATION M = MOTOR DRIVEN

FIRLPEU

VLP-UL-M-KIT

-

36

24-

24-

-

-

REX

REX

call for price

800

-

-

--

--

-

-

140+

+

+

+140

-

-

PART NUMBER

PART NUMBER

LIST

LIST

MD-FIRLPEU-24

VLP-UL-M-KIT

call for price

$800

FOR COMPLETE DEVICE ONLY

MODEL + FUNCTION

PREFIX

VOLTAGE

OPTIONAL SWITCHES

SIZE (Width of device)

FINISHSelect a model number and add EU (Fail Secure) - Electronically Unlocked only

MD - Modification

24 Volts only

REX – Request-to-ExitLBM – Latchbolt Monitor

36 – 36” wide device42 – 42” wide device48 – 48” wide device

628 – Aluminium313 – Duronatic315 – Black


Additional Options

FOR MODIFICATION AND COMPLETE DEVICE

ACCESSORIES10’ Lead – 10’ Wire Lead w/ connector(s)QC – Molex Connectors

PREFIX OPTIONSSIZEMODEL + FUNCTION VOLTAGE FINISH

COMPLETE MOTOR DRIVEN DEVICE

- PD25-M-RIM 3624M 626 REX

1725 --- - ++

140-

PART NUMBER

LIST

PD25-M-RIM-36-626

$1725

= Push to Set Technology= Command Access Motor Driven Unit

For Complete Device Only

48”

628

36”

626

Requ

est-to

-Exit (

REX)

Latch

bolt M

onito

r (LBM

)

42”

613

Electrified Functions Optional Switches

Sizes

RIM

In-stock Finishes

MORTISE

CVR

SVR

= Available- = Not Applicable 313




Page 26



ElEctrifiEd latch Pullback kits

KIT ONLY (Customer’s Corbin Russwin 4000/5000 series devices)Call for availability of complete devices. Maintains UL Listing.

CORBIN RUSSWIN

For Complete Device Only940 940940 940 140

-

-

CYLP-UL-M-KIT

MOTOR DRIVEN

KIT ONLY (Customer’s Cal Royal 9800 & 2200 series devices)Call for availability of complete devices. Maintains UL Listing.

CAL ROYAL


940 940 140

-

-

ARLP-UL-M-KIT

MOTOR DRIVEN

MOTORIZED KIT ( Customer’s Adams Rite 8200, 8400, 8600, & 8800 series devices)KIT ONLY. Maintains factory dogging ability & UL Listing.

ADAMS RITE

940 940

KIT ONLY (Customer’s Lawrence 8000 Series Devices)Call for availability of complete devices. Maintains UL Listing

LAWRENCE

For Complete Device Only140

-

-

LLP-UL-M-KIT

MOTOR DRIVEN 940 940940 940

Improved

NEW!

NEW!

SLP-UL-M-KIT

KIT ONLY (Customer’s Sargent 8000 Series Devices)Call for availability of complete devices. Maintains UL Listing.

SARGENT

875 875 140

For Complete Device Only875 875 140MOTOR DRIVEN



Improved


940 940 140

-

-

CRLP-UL-M-KIT

MOTOR DRIVEN 940 940


48”

628

36”

626

Requ

est-to

-Exit (

REX)

Latch

bolt M

onito

r (LBM

)

42”

613


Sizes

RIM

In-stock Finishes

MORTISE

CVR

SVR





Page 27



(Customer’s Von Duprin 33/35 & 98/99 Series Devices) / KIT / COMPLETE DEVICECall for availability of complete devices.

VON DUPRIN

KIT ONLY (Customer’s Yale 7000 Series Devices)Call for availability of complete devices. Maintains UL Listing.

YALE

940 940 140 -

CYLP-UL-M-KITFor Complete Device Only

940 940

-

MOTOR DRIVEN

* Maintains UL Listing: Can be field-installed or Factory will install in customer’s device at no charge.

For Complete Device Only-

- 855 140

-

-

VDLP-M-KIT

KIT ONLY (Customer’s Von Duprin Impact 94/95 Series Devices)VON DUPRINIMPACT

-

-MOTOR DRIVEN

For Complete Device Only750

800

750

800

750

800

750

800

VLPKIT36

VLPKIT48

VLP-UL-KIT*

VLP-M-KIT48VLP-M-KIT36 140 140

VLP-UL-M-KIT*

SOLENOID DRIVEN

MOTOR DRIVENImproved

Factory will install in customer’s device at no charge.

855





Call for Pricing &Availability

Call for Pricing & Availability

Improved

ElEctrifiEd latch Pullback kits


48”

628

36”

626

Requ

est-to

-Exit (

REX)

Latch

bolt M

onito

r (LBM

)

42”

613


Sizes

RIM

In-stock Finishes

MORTISE

CVR

SVR





Page 28



Request to Exit Switch added to Exit Device

DESCRIPTION

Latchbolt Monitor Switch added to Exit Device

$140

LIST

$140

REX

PART

LBM

SWITCHES FOR EXIT DEVICES

825

-

-

-

-855 140 140

PD10 / PD11 SERIES

MOTOR DRIVENPD10-M

COMPLETE DEVICESPD10 / PD11 Series retrofits Doromatic 1600/1700 & First Choice 3600/3700.

COMMAND ACCESS PD10 / 11

-

-

1255 - -1575 140 140-

MECHANICALPD11

+55

+55

*

-

-

-

*48” Device mechanics can be relocated for 42” cut down.

+110

+110

Improved

835

-

-855 140

-

-

PD15 / PD16 SERIES

COMPLETE DEVICEPD15 / PD16 retrofits Jackson 1200 & AHT 8000/9000. Please Specify Handing for CVR.

COMMAND ACCESS PD15/16

---

--

-

MOTOR DRIVENPD15-M

MECHANICALPD16

1255 -1575 140 -----

140 140

PD25/26 SERIES

COMPLETE DEVICEPD25/PD26 retrofits Cal Royal 7700 & Von Duprin 99/98 series

COMMAND ACCESS PD25/26

-+35 +55

-

-* Add suffix (F) for Fire Rated. Additional List $110 RIM and $165 SVR/CVR/Mort.- Auxiliary Fire Bolt List $130- Extension Rods List $110

* -

140 140+55

-MOTOR DRIVENPD25-M

MECHANICAL PD26

935 1150 12651265

1725 1930 19951995

+35 -

***

-

-

--

-

Improved

ElEctrifiEd latch Pullback comPlEtE Exit dEvicEs

DOR-O-MATIC1600/1700See PD10 for complete retrofit device

FIRST CHOICE 3600/3700

JACKSON 1285/1295See PD15 for complete retrofit device

&


1390 1650

-

- 140

-

-

COMPLETE DEVICE

MOTOR DRIVEN

ARLP-M-88 ARLP-M-86

COMPLETE MOTORIZED DEVICE Command Access Modified Adams Rite 8000 series. Call for availability of sizes and finishes. Maintains factory dogging ability.

ADAMS RITEImproved




Page 29



NOTES:

ACCESSORIES & REPLACEMENT PARTS FOR EXIT DEVICESDESCRIPTION

$55

LISTPART

Replacement Solenoid Assembly for Elec Latch Pullback - Dual Coil**

Replacement Solenoid Assembly for Elec Latch Pullback - Single Coil**

$290

$290

SOLLP2

SOLLP1

Replacement Solenoid Assembly for Elec Latch Pullback - (Two Solenoid Assembly) Single Coil* $395SOLLP4

3-5’ Door Cord to connect a 8 or 12 -pin prepped locking device to a 8 or 12 -pin prepped power transfer product.

QC

$110Door Cord QC


*

* *See Website for specific applications



* For special length, please call to quote.Allegion Connect® is a registered trademark of Allegion

Field Request to Exit Kit for Cal Royal 2200 & 9800, & Sargent 80 series exit device.CRSREXKIT-ED

Field Request to Exit Kit for Adams Rite 8400/8600/8800 series exit device.

Field Request to Exit Kit for Motorized Adams Rite 8400/8600/8800 series exit device.

Field Request to Exit Kit for Command Access PD10/11, AHT4/5, First Choice 3600/3700, &Doromatic 1600/1700 series exit devices.

$140

$150

$140

$140

$140

ARREXKIT-ED

ARREXKIT-M-ED

PD10REXKIT-ED

$140

$140

Field Request to Exit Kit for Command Access PD25/26, Cal Royal 7700 series exit device.

Field Request to Exit Kit for Precision 2000 series exit device.

PD25REXKIT-ED

PREREXKIT-ED

-

Field Request to Exit Kit for Command Access PD15/16, AHT 8/9, Kawneer 1686/1786, & Jackson 1285/1295 series exit device

PD15REXKIT-ED $140 -

$225Field Double Request to Exit Kit for Von Duprin 33/35 & 98/99 series exit device.VDREXKIT2-ED

Field Request to Exit Kit for Von Duprin 33/35 & 98/99 series exit device. $140VDREXKIT-ED

-

-

Field Request to Exit Kit for Corbin 4000/5000 & Yale 7000 series exit device. Eliminates mechanical doggingCYREXKIT-ED -$140 -

Field Double Request to Exit Kit for Adams Rite 8400/8600/8800 series exit device.ARREXKIT2-ED $225 -

-

-

List

Mec

hani

cal

Sole

noid

Driv

enM

otor

Driv

en

REX kit designed to work with

following device

DESCRIPTIONPART

SWITCH FIELD KITS FOR EXIT DEVICES

Field Request to Exit Kit for Command Access CRLP, CYLP, & SLP Motorized Kits.CATREXKIT-M-ED -

Low Current Field Request to Exit Kit for Von Duprin 33/35 & 98/99 series exit device. $150VDREXKIT-LC-ED

* Consult factory for applications on non-Command factory devices.NOTES:

ElEctrifiEd latch Pullback Exit dEvicEs & kits
















Page 30



DESCRIPTION LISTPART

Power Module for Elec Latch Pullback devices in shrink tube housing with retrofit wire harness* $250PM300

Power Interface Module to operate a Command Access Motorized Latch Pullback device (specify MM Series). $250MM Modules

Current Reduction Unit (new improved circuitry). $90CRU2

POW

ER A

CCES

SORI

ESPOWER ACCESSORIES

POWER MODULES Specify the need for a (D) Delay when ordering. If (D) Delay option requested there is no additional cost.

$250PM300D Power Module for Elec Latch Pullback devices in shrink tube housing with 5 second delay & with retrofit wire harness*

Power Module for Elec Latch Pullback devices in shrink tube housing with retrofit wire harness. Works with AC voltage & unregulated power supplies $250PM300AC

Power Module for Elec Latch Pullback devices in shrink tube housing with retrofit wire harness. Works with AC voltage & unregulated power supplies. Has 5 second delay $250PM300ACD





* See website for specific applications.

PM300 Series

Beginning with the original PM100, evolving into the PM/PWM 200 series the Command Access line of power modules was created to give our customers more flexibility when installing costly solenoid driven, latch pullback devices. Along with the ability to power single coil, dual coil, and double solenoid applications. The module allowed for a much longer wire run and would operate with nonproprietary power supplies. Our newly developed PM300 combines all the features of the different PM/PWM200 modules we’ve developed over the years and integrates them into one module! As for the installer that creates they’re own power sources from AC transformers, the PM300AC is designed to operate with a broad range of AC power sources.

CRU2

The CRU2 current reduction unit IS a great way to cool down overheated electric cylindrical locks, mortise locks, panic trim, or strikes that are energized for long periods of time. The CRU2 dynamically limits the current to the solenoid after it’s initially energized allowing it run cooler. CRU2 is manually adjustable. Our most recent improvement to the CRU series is they are now non-polarized, eliminating any wiring confusion.

* When utilizing “High Output” switch must be paired with Command Access PS1, PS5-4. & PS5-6 Power Supplies.

Need help fiNdiNg the right pM300. CheCk out our pM300 series Cross refereNCe sheet.

sCaN here

POW

ER S

UPP

LIES

http://media.virbcdn.com/files/6e/9bdfd8a241cd093b-PM300Series_Chart_After9_15.pdf




Page 31


Published: March 15, 2016PO

WER

SU

PPLI

ES POWER SUPPLIESCommand Access power supplies offer high quality, cost effective solution for powering electric latch pullback exit devices along with low energy locking devices. Teamed with our PM300 technology, these power supplies provide the necessary surge current that most latch pullback exit devices require. Our PS series are all 24V regulated, linear power supplies with solid-state design (no mechanical relays) which results in more durable and predictable door control. Whether you need adjustable output voltage, fire alarm links, battery charging, or more, Command Access has power supplies with features that give you the flexibility and control to do the job right at an extremely competitive LIST.

UL/CSA LISTINGPS1PS2PS2BBPS5

PS5-4PS5-6PS5-8

(Independent Accredited Testing Lab)

PS1 – 1A, 24V regulated power supply w/boost circuitry for up to (2) electric latch pullback devices. Includes (1) solid state input/output

DESCRIPTION

PS2 – 2A, 24V regulated power supply w/boost circuitry for up to (2) electric latch pullback devices. Includes (2) solid state inputs/outputs and a fire alarm link

Board Only to replace the discontinued Von Duprin PS873-2 power supply - 2A, 24V regulated power supply w/boost circuitry. Includes (2) solid state inputs/outputs and a fire alarm link.

PS5 – 5A, 24V regulated power supply w/boost circuitry is capable of powering up to (8) PM300 module controlled electric latch pullback devices. Includes (1) solid state output, battery charging circuit, and a fire alarm link

PS5-4 – 5A, 24V regulated power supply w/boost circuitry for up to (4) PM300 module controlled electric latch pullback devices. Includes (4) solid state inputs/outputs, battery charging circuit, and a fire alarm link

PS5-6 – 5A, 24V regulated power supply w/boost circuitry for up to (6) PM300 module controlled electric latch pullback devices. Includes (6) solid state inputs/outputs, battery charging circuit, and a fire alarm link

PS5-8 - 5A, 24V regulated power supply w/boost circuitry for up to (8) PM300 module controlled electric latch pullback devices. Includes (8) solid state inputs/outputs, battery charging circuit, and a fire alarm link

PS2BB – 2A, 24V regulated power supply w/boost circuitry for up to (2) electric latch pullback devices. Includes (2) solid state inputs/outputs, battery charging circuit, and a fire alarm link

Board Only to replace the discontinued Von Duprin PS873-2BB power supply - 2A, 24V regulated power supply w/boost circuitry. Includes (2) solid state inputs/outputs, battery charging circuit, and a fire alarm link.

$470

LIST

$675

$495

$725

$900

$920

$950

$725

$545

PS1

PART

PS2

PS2- BO

PS5

PS5-4

PS5-6

PS5-8

PS2BB

PS2BB- BO

POWER SUPPLIES FOR LATCH PULLBACK/EXIT DEVICES, MORTISE & CYLINDRICAL LOCKS

Command Access delay/sequencer board for auto operator integration and door sequencing.

2 channel Input/Output board to retrofit the discontinued Von Duprin PS873 power supply, replacing the discontinued VD PS871-2 board.

$280

$280

DS1

VD2

POWER SUPPLY & AUXILIARY BOARDS















Voltage converter: converts incoming 24VDC to output 12VDC $100VC2412




Page 32



WER

TRA

NSF

ERPOWER TRANSFER HINGESCommand Access Energy Transfer Hinges (ETH) and Monitor Hinges (ETM) are the ideal way pass low voltage power from the hinge jamb to the lockset and/or monitor the door position without having exposed wires. These hinges are commonly used with electric mortise & cylindrical locks, electric strikes (when on a pair of doors), electric exit trims, latch pullback devices, door mounted card readers and low voltage door lights. We stock a vast variety of our Command Access UL-F rated hinges along with a good stock of most major brands. With a wide array of sizes, types, and finishes, we stock the materials to meet your immediate needs.

WIRES

TYPE

SIZE / HANDING

STYLE

FINISH (Steel Base Metal)

FINISH (Brass Base Metal)

FINISH (Stainless Steel Base Metal)

OPTIONS

2W - (2/20ga)4W - (4/26ga)6W - (6/26ga)8W - (8/28ga)10W - (10/28ga)12W - (12/28ga)

2WH - (2/18ga)4WH - (2/18ga+2/26ga)6WH - (2/18ga+4/28ga)8WH - (2/20ga+6/28ga)10WH* - (2/20ga+8/28ga)12WH* - (2/20ga+10/28ga)

ETH - Energy Transfer HingeETM - Energy Transfer Monitor Hinge

4.0 x 4.0 (SQ or RC)4.5 x 4.0 (SQ or RC)4.5 x 4.55.0 x 4.0*5.0 x 4.5

5.0 x 5.04.5 x 6.0 (WT)5.0 x 6.0 (WT)LH - Left HandRH - Right Hand 3SW - 3 Knuckle Standard Weight

3HW - 3 Knuckle Heavy Weight5SW - 5 Knuckle Standard Weight

5HW - 5 Knuckle Heavy WeightCATPIVOT - 3/4” Offset Pivot

600/P – Prime Coat632/3 – Bright Brass633/4 – Satin Brass638/5 – Satin Brass Antique637/9 – Bright Bronze639/10 – Satin Bronze

641/10A – Antique Bronze Laq.640/10B – Antique Bronze Oil646/15 – Satin Nickel651/26 – Bright Chrome652/26D – Satin Chrome693/L1 – Black

600/P – Prime Coat605/3 – Bright Brass606/4 – Satin Brass609/5 – Satin Brass Antique611/9 – Bright Bronze612/10 – Satin Bronze

613/10B – Antique Bronze Oil619/15 – Satin Nickel625/26 – Bright Chrome626/26D – Satin Chrome693/L1 – Black

629 – Polished Stainless 630 – Brushed Stainless

4’ LeadsQC - Molex Connectors

HT - Hospital Tip (SS/Brass Only)


TYPE

TYPE

FINISH

FINISH

WIRES

WIRES

SIZE /HANDING

SIZE /HANDING

STYLE

STYLE

OPTIONS

OPTIONS

COMPLETE ENERGY TRANSFER HINGE

COMPLETE ENERGY TRANSFER PIVOT

EXAMPLES

ETH

ETH

-

-

4W

2W

-

-

652

626

-

-

4545

LH

-

-

3SW

CATPIVOT

160

360

-

4’ LEAD

-

n/c

PART NUMBER

PART NUMBER

LIST

LIST

ETH4W4545-626-3SW

ETH2WLH-626-CATPIVOT-4’

$170

$360

* Call for pricing & availability

NOTE: Wire access hole location on all hinges, regardless of hinge manufacturer, are located per Command Access Templates unless otherwise requested. Our standard templates are available on our website at www.CommandAccess.com.

2W (2

/20ga

)

10W (1

0/28g

a)

6W (6

/26ga

)

2WH (2

/18ga

)

6WH (2

/18ga

+4/28g

a)

4W (4

/26ga

)

12W (1

2/28g

a)

8W (8

/28ga

)

4WH (2

/18ga

+2/26g

a)

8WH (2

/20ga

+6/28g

a)

For Electric Mortise Locks, Cylindrical Locks & Exit Trim For Electric Latch Pullback Devices

- = Not Applicable• = Available 10

/12WH (2/

20ga

+6/28g

a)




Page 33



POWER TRANSFER HINGES

165

220

245

190

290

165

220

245

215

305

165

220

245

190

290

290

165

220

245

248

305

165

280

245

215

200

245

260

248

320

320

200

245

260

280

330

200

305

260

280

220

265

275

280

348

348

220

265

275

305

358

220

330

275

305

230

285

305

370

230

285

330

230

358

330

230

285

300

305

370

370

230

285

300

330

380

230

358

300

330

-

285

320

290

358

360

-

300

-

-

305

370

370

265

285

320

320

370

275

300

330

330

380

265

348

320

320

275

358

330

330

-

300

-

-

305

370

370

-

320

-

-

320

380

380

275

300

330

330

380

285

320

348

348

395

275

358

330

330

285

370

348

348

165

280

245

248

4.0 x 4.0 (SQ or RC)

4.5 x 4.0

4.5 x 4.0

4.5 x 4.0

4.0 x 4.0 (SQ or RC)

4.0 x 4.0 (SQ or RC)

5.0 x 4.5

5.0 x 5.0

5.0 x 5.0

5.0 x 5.0

5.0 x 4.5

5.0 x 4.5

4.5 x 4.5

5.0 x 4.5

5.0 x 4.5

5.0 x 4.5

4.5 x 4.5

4.5 x 4.5

4.5 x 6.0

4.5 x 4.0 (SQ or RC)

4.5 x 4.5

4.5 x 4.5

4.5 x 4.5

4.5 x 4.0 (SQ or RC)

4.5 x 4.0 (SQ or RC)

5.0 x 5.0

5.0 x 5.0

5.0 x 5.0

5 KNUCKLE STANDARD WEIGHT TRANSFER HINGE - ETH

5 KNUCKLE HEAVY WEIGHT TRANSFER HINGE - ETH

STEEL BASE METAL (CH-BB79)

STEEL BASE METAL (CH-BB68)

BRASS BASE METAL (CH-BB91)

BRASS BASE METAL (CH-BB99)

STAINLESS STEEL BASE METAL (CH-BB99)

STAINLESS STEEL BASE METAL (CH-BB91)

8WH (2

/20ga

+6/28g

a)













300

370

300

380

300

245

290

245

305

245

290

245

305

245

260

320

260

330

260

275

348

275

358

275

300

370

300

380

300

320

360 370

320

370

330

380

320 330

370 380

330

380

348

395

330 348245

300

370

300

380

300

290

-

330

-

-

340

400

405

310

330

375

370

425

310

390

375

370

405

375

425

375

300

348

300

300

348

300

330

310

370

310

358

330

395

330

380

348

440

348

420

348

420

348

405

370

405

385

420

370 385

395 405

385

420

400

430

385 400

405 420330

415

440

415

430




















www.connectionnetwork.ca300

348

300

300

348

300

330

310

370

358

330

395

330

380

348

440

348

420

348

420

348

405

370

405

385

420

370 385

395 405

385

420

400

430

385 400

405 420330

440

415

430

2W (2

/20ga

)

10W (1

0/28g

a)

6W (6

/26ga

)

2WH (2

/18ga

)

6WH (2

/18ga

+4/28g

a)

4W (4

/26ga

)

12W (1

2/28g

a)

8W (8

/28ga

)

4WH (2

/18ga

+2/26g

a)

8WH (2

/20ga

+6/28g

a)


- = Not Applicable• = Available 10

/12WH (2/

20ga

+6/28g

a)




Page 34



230

190

290

250

230

190

230

190

290

250

230

190

280

240

250

210

305

280

250

210

285

265

270

230

348

305

270

230

330

290

285

255

370

330

285

255

360

320

285

255

370

330

285

255

360

320

305

275

360

320

315

285

370

330

305

275

315

285

348

305

360

320

315

285

3370

330

330

300

380

348

315

285

330

300

360

320

370

330

280

240

4.5 x 4.0

4.5 x 4.0

4.5 x 4.0

4.5 x 4.0

4.5 x 4.0

5.0 x 5.0

5.0 x 5.0

5.0 x 5.0

5.0 x 5.0

5.0 x 5.0

5.0 x 4.5

5.0 x 4.5

5.0 x 4.5

5.0 x 4.5

5.0 x 4.5

4.5 x 4.5

4.5 x 4.5

4.5 x 4.5

4.5 x 4.5

4.5 x 4.5

3 KNUCKLE HEAVY WEIGHT TRANSFER HINGE - ETH

3 KNUCKLE STANDARD WEIGHT TRANSFER HINGE - ETH

STEEL BASE METAL (CHCB75)


BRASS BASE METAL (CHCB85)


STAINLESS STEEL BASE METAL (CHCB85)




8WH (2

/20ga

+6/28g

a)





348

315

395

365

348

315

380

348





4.5 x 4.0

5.0 x 5.0

5.0 x 4.5

4.5 x 4.5

Call For Pricing

Call For Pricing

Call For Pricing

Call For Pricing

2W (2

/20ga

)

10W (1

0/28g

a)

6W (6

/26ga

)

2WH (2

/18ga

)

6WH (2

/18ga

+4/28g

a)

4W (4

/26ga

)

MONITOR Only

8W (8

/28ga

)

4WH (2

/18ga

+2/26g

a)

8WH (2

/20ga

+6/28g

a)






Page 35



AVAILABLE WITH MAGNETIC MONITOR SWITCH ONLY

-

-


-

-

-

-

-

-

- -

- -

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- -

-

-

-

-

-

- -

-

-

-

-

-

4.5 x 4.0

4.5 x 4.0

4.5 x 4.0

4.5 x 4.0

4.5 x 4.0

4.5 x 4.0

5.0 x 5.0

5.0 x 5.0

5.0 x 5.0

5.0 x 5.0

5.0 x 5.0

5.0 x 5.0

5.0 x 4.5

5.0 x 4.5

5.0 x 4.5

5.0 x 4.5

5.0 x 4.5

5.0 x 4.5

4.5 x 4.5

4.5 x 4.5

4.5 x 4.5

4.5 x 4.5

4.5 x 4.5

4.5 x 4.5

5 KNUCKLE HEAVY WEIGHT TRANSFER HINGE - ETM

5 KNUCKLE STANDARD WEIGHT TRANSFER HINGE - ETM

STEEL BASE METAL (CHBB68)

STEEL BASE METAL (CHBB79)

BRASS BASE METAL (CHBB99)

BRASS BASE METAL (CHBB91)

STAINLESS STEEL BASE METAL (CHBB99)

STAINLESS STEEL BASE METAL (CHBB91)



8WH (2

/20ga

+6/28g

a)

Call For Pricing

Call For Pricing

Call For Pricing

Call For Pricing

Call For Pricing

Call For Pricing

2W (2

/20ga

)

10W (1

0/28g

a)

6W (6

/26ga

)

2WH (2

/18ga

)

6WH (2

/18ga

+4/28g

a)

4W (4

/26ga

)

MONITOR Only

8W (8

/28ga

)

4WH (2

/18ga

+2/26g

a)

8WH (2

/20ga

+6/28g

a)






Page 36





8WH (2

/20ga

+6/28g

a)



-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.5 x 4.0

4.5 x 4.0

4.5 x 4.0

4.5 x 4.0

4.5 x 4.0

4.5 x 4.0

5.0 x 5.0

5.0 x 5.0

5.0 x 5.0

5.0 x 5.0

5.0 x 5.0

5.0 x 5.0

5.0 x 4.5

5.0 x 4.5

5.0 x 4.5

5.0 x 4.5

5.0 x 4.5

5.0 x 4.5

4.5 x 4.5

4.5 x 4.5

4.5 x 4.5

4.5 x 4.5

4.5 x 4.5

4.5 x 4.5

3 KNUCKLE HEAVY WEIGHT TRANSFER HINGE - ETM

3 KNUCKLE STANDARD WEIGHT TRANSFER HINGE - ETM







Call For Pricing

Call For Pricing

Call For Pricing

Call For Pricing

Call For Pricing

Call For Pricing

2W (2

/20ga

)

10W (1

0/28g

a)

6W (6

/26ga

)

2WH (2

/18ga

)

6WH (2

/18ga

+4/28g

a)

4W (4

/26ga

)

8W (8

/28ga

)

4WH (2

/18ga

+2/26g

a)

8WH (2

/20ga

+6/28g

a)






Page 37



POWER TRANSFER PIVOTS

450 450 465 465 495485 520 530520Command Access Intermediate Pivots

ENERGY TRANSFER PIVOTS - ETH


Specify Handing. 613, 626 Finishes only. Consult factory for other finishes.

NOTES

ADDITIONAL OPTIONS FOR POWER TRANSFER


8WH (2

/20ga

+6/28g

a)

(1) 4’ lead

DESCRIPTION

n/c

LIST

4’ Lead

PART

Wide Throw Upcharge

Hospital Tip (SS/Brass Only)

Hinge rewire CALL

CALL

$155

WT

HT

Hinge Rewire

$558 or 12-pin Molex Connectors added to Hinge w/ 10” Wire Lead to retrofit ElectroLynx®QC

QC W/ Lead 3-5’ Wire Lead w/ 8 or 12-pin Molex connector added to Hinge to retrofit ElectroLynx®. Pinned w/ connectors loose $85*





Page 38



WER

TRA

NSF

ERPOWER TRANSFER HINGE MODIFICATIONSCustomers may send in their hinges for modification only. We modify a wide array of sizes, types, and finishes. These modified Energy Transfer Hinges (ETH) and Monitor Hinges (ETM) are the ideal way pass low voltage power from the hinge jamb to the lockset and/or monitor the door position without having exposed wires. ETH & ETM hinges are commonly used with electric mortise & cylindrical locks, electric strikes (when on a pair of doors), electric exit trims, latch pullback devices, door mounted card readers and low voltage door lights. If you do not see your desired modification listed, please consult the factory.

WIRES

TYPE

HINGE SIZE

STYLE

SPECIALTY

OPTIONS

2W - (2/20ga)4W - (4/26ga)6W - (6/26ga)8W - (8/28ga)10W - (10/28ga)12W - (12/28ga)

2WH - (2/18ga)4WH - (2/18ga+2/26ga)6WH - (2/18ga+4/28ga)8WH - (2/20ga+6/28ga)10WH* - (2/20ga+8/28ga)12WH* - (2/20ga+10/28ga)

ETH - Energy Transfer HingeETM - Energy Transfer Monitor Hinge

MOD - 4.0x4.0 (SQ or RC) 5.0x4.0 4.5x4.0 (SQ or RC) 5.0x4.5 4.5x4.0 5.0x5.0

MODWT - 4.5x6.0 5.0x6.0

MODPV - 3/4” offset pivot (top/intermediate) Center Hung pivot 1-1/2” offset pivot (top/intermediate) Pocket pivot

MODVSS - 3/4” offset pivot (top/intermediate) Center Hung pivot 1-1/2” offset pivot (top/intermediate) Pocket pivot

3SW - 3 Knuckle Standard Weight3HW - 3 Knuckle Heavy Weight5SW - 5 Knuckle Standard Weight5HW - 5 Knuckle Heavy Weight

3/4” - offset pivot (top/intermediate)1-1/2” - offset pivot (top/intermediate)TP - Top pivot (center hung)

PP - Pocket pivot (center hung)

4’ Lead - 4’ lead on door sideHT - Hospital Tip (SS/Brass Only)QC - Molex connectors added to hinge to retrofit ElectroLynx® (standard

gauge wire only)

(Brass/Aluminum)

(Stainless Steel)

* Call for pricing & availability


TYPE

TYPE

SPECIALTY

SPECIALTY

WIRES

WIRES

MODIFICATION GROUP

MODIFICATION GROUP

STYLE

STYLE

OPTIONS

OPTIONS

BUTT HINGE MODIFICATION

PIVOT HINGE MODIFICATION

EXAMPLES

ETH

ETH

-

-

4W

8W

-

-

5SW

-

130

-

MOD

MODPV

-

250

-

3/4"

-

-

4’ Lead

QC

n/c

10 net + n/c

PART NUMBER

PART NUMBER

LIST

LIST

ETH4WMOD-5SW-4’ Lead

ETH8WMODPV 3/4 QC

$130

$250 + 10 (net)


CALL FOR AVAILABILITY & PRICING


EXTRA HINGES FOR MODIFICATIONDue to the nature of the modification process, please send 1 extra hinge for every 8 to be modified. We will return any hinges not need back with your order. For Example: 1-8 hinges, 1 extra 9-16 hinges, 2 extra . . . .

2W (2

/20ga

)

10W (1

0/28g

a)

6W (6

/26ga

)

2WH (2

/18ga

)

6WH (2

/18ga

+4/28g

a)

4W (4

/26ga

)

8W (8

/28ga

)

4WH (2

/18ga

+2/26g

a)

8WH (2

/20ga

+6/28g

a)






Page 39



POWER TRANSFER HINGES - MODIFICATIONS ONLY

130

130

190

300

300

300

170

190

215

370

370

370

160

180

205

330

330

330

130

130

190

300

300

300

170

190

215

370

370

370

160

180

205

330

330

330

140

160

200

190

340

340

340

150

150

200

320

320

320

190

210

225

390

390

390

180

200

215

350

350

350

160

180

210

200

360

360

360

170

170

210

340

340

340

210

230

235

410

410

410

200

220

225

370

370

370

180

200

220

210

380

380

380

180

180

200

350

350

350

220

240

225

420

420

420

210

230

215

380

380

380

190

210

210

200

390

390

390

190

190

220

360

360

360

230

250

245

430

430

430

220

240

235

390

390

390

200

220

230

220

400

400

400

180

180

210

350

350

350

220

240

235

420

420

420

220

220

240

410

410

410

260

280

265

480

480

480

210

230

225

380

380

380

250

270

255

440

440

440

190

210

220

210

390

390

390

230

250

250

240

450

450

450

200

230

370

370

370

240

260

255

440

440

440

230

250

245

400

400

400

210

230

240

230

410

410

410

140

160

200

190

340

340

340

5 Knuckle Standard Weight (Steel or Brass Base)


3/4” Offset Brass or Aluminum

Swing Clear - Standard Weight Steel Hinge

Raised Barrel - Standard Weight Steel Hinge

Half or Full Surface - Standard Weight Steel Hinge

5 Knuckle Heavy Weight (Stainless Steel)


1-1/2” Offset Stainless Steel

Swing Clear - Heavy Weight Stainless Steel Hinge

Raised Barrel - Heavy Weight Stainless Steel Hinge

Half or Full Surface - Heavy Weight Stainless Steel Hinge

5 Knuckle Heavy Weight (Steel or Brass Base)


1-1/2” Offset Brass or Aluminum

Top or Center Hung Pivot

Swing Clear - Standard Weight Stainless Steel Hinge

Raised Barrel - Standard Weight Stainless Steel Hinge

Half or Full Surface - Standard Weight Stainless Steel Hinge

5 Knuckle Standard Weight (Stainless Steel)


3/4” Offset Stainless Steel

Swing Clear - Heavy Weight Steel Hinge

Raised Barrel - Heavy Weight Steel Hinge

Half or Full Surface - Heavy Weight Steel Hinge

ENERGY TRANSFER HINGES - ETH-MOD5 KNUCKLE BUTT HINGE MODIFICATIONS

3 KNUCKLE BUTT HINGE MODIFICATIONS

PIVOT HINGE MODIFICATIONS (3/4”, 1-1/2”, TOP, CENTER HUNG)

SPECIALITY HINGE MODIFICATIONS






2W (2

/20ga

)

MONITOR Only

6W (6

/26ga

)

2WH (2

/18ga

)

6WH (2

/18ga

+4/28g

a)

4W (4

/26ga

)

8W (8

/28ga

)

4WH (2

/18ga

+2/26g

a)

8WH (2

/20ga

+6/28g

a)






Page 40



POWER TRANSFER HINGES - MODIFICATIONS ONLY

130

140

180

200

170

190

230

240

280

300

270

290

140

160

230

240

280

300

270

290

240

260

250

260

300

320

290

310

260

280

280

290

330

350

320

340

290

310

270

280

320

340

310

330

280

300

280

290

330

350

-

330

-

390

320

340

-

380

290

310

-

350

300

310

350

370

340

360

310

330

240

260









ENERGY TRANSFER HINGES - ETM-WMOD5 KNUCKLE BUTT HINGE MODIFICATIONS

3 KNUCKLE BUTT HINGE MODIFICATIONS


ADDITIONAL OPTIONS FOR POWER TRANSFER

(1) 4’ lead

DESCRIPTION

n/c

LIST

4’ Lead

PART

Wide Throw Upcharge

Hospital Tip (SS/Brass Only)

Hinge rewire CALL

CALL

$155

WT

HT

Hinge Rewire



$558 or 12-pin Molex Connectors added to Hinge w/ 10” Wire Lead to retrofit ElectroLynx®QC

QC W/ Lead 3-5’ Wire Lead w/ 8 or 12-pin Molex connector added to Hinge to retrofit ElectroLynx®Pinned w/ connectors loose. $85



*

DO

OR

LOO

PS




Page 41


Published: March 15, 2016D

OO

R LO

OPS DOOR LOOPS

The door loop is a low cost method of transferring low voltage power from the door frame to the locking device. Door loops are commonly used with electric mortise & cylindrical locks, electric exit trims and latch pullback devices.

Aluminium finish, 6” total length.

20” Door Loop, Aluminium finish (Can be cut in the field to length)

Aluminium finish, 12” total length. Includes 1 side fixed for complete concealment in opposite side and extended length for wire guidance.

DESCRIPTION

DESCRIPTION

DESCRIPTION

Black finish, 6” total length.

20” Door Loop, Duro finish (Can be cut in the field to length)

Black finish, 12” total length. Includes 1 side fixed for complete concealment in the opposite side and extended length for wire guidance.

Black finish, 6” total length. Includes 1 side fixed for complete concealment in opposite side.

Aluminium finish, 6” total length. Includes 1 side fixed for complete concealment in opposite side.

$60

$90

$65

LIST

LIST

LIST

$60

$90

$65

$65

$65

CDL-AL

DL-20A

CDL-AL-EXT

PART

PART

PART

CDL-BLK

DL-20D

CDL-BLK-EXT

CDL-BLK-FX

CDL-AL-FX

CONCEALED DOOR LOOPS FOR CONTINUOUS AND BUTT HINGE APPLICATIONS

CONCEALED DOOR LOOPS FOR 3/4” OFFSET PIVOT APPLICATIONS

DOOR LOOPS

















Aluminium finish, 18” total length. Includes 1 side fixed for complete concealment in opposite side and extended length for wire guidance.

Black finish, 18” total length. Includes 1 side fixed for complete concealment in the opposite side and extended length for wire guidance.

$90

$90

CDL-AL-EXT2

CDL-BLK-EXT2

5 Standard Weight 3 Standard Weight 3 Heavy Weight5 Heavy Weight




Page 42



COMMAN

D ACCE

SSHAG

ER

BOMMER

MCKINNEY

RAMCO

STANLE

Y

IVES

PBB

CAL R

OYAL

TA W

EST

All hinges will be supplied as Command Access Branded, UL-F rated hinges unless otherwise requested. If another manufacturer’s hinge is desired, please call for availability.

NOTES:There will be a $5 net labelling charge to emboss the “Command Access UL-F” label on another manufac-turer’s hinge.

CH-BB79 BB81FBB179CB179 5BB1 BB31BB1279 BB5000TA2714 BB79 DH-BB179

5 Knuckle Standard Weight Hinges Steel Base

CH-BB99 4B21FBB199CB199 5BB1HW N/ABB1199 BB5005T4A3386 BB99 DH-BB168BR

5 Knuckle Heavy Weight Hinges Brass Base (All except US32D)

CH-CB80 CB51CB1960R 3CB1 BB2200-630AB800 LB8002TA314 CB80 DH-CB700SS3 Knuckle Standard Weight Hinges

Stainless Steel Base

CH-BB91 BB51FBB191CB191 5BB1 BB31-630BB1191 BB5002TA2314 BB91 DH-BB179SS

5 Knuckle Standard Weight Hinges Stainless Steel Base

CH-CB70 CB81CB1900R 3CB1 BB2200AB700 LB8000TA714 CB70 DH-CB7003 Knuckle Standard Weight Hinges

Steel Base

CH-CB85 4C21CB1961R 3CB1HW N/AAB850 LB8005TA386 CB85 DH-CB8003 Knuckle Heavy Weight Hinges

Brass Base (All except US32D)

CH-BB91 BB21FBB191CB191 5BB1 SBBB31BB1191 BB5001TA2314 BB91 DH-BB179BR

5 Knuckle Standard Weight Hinges Brass Base (All except US32D)

CH-BB99 4B51FBB199CB199 5BB1HW BB5200-630BB1199 BB5006T4A3386 BB99 DH-BB168SS

5 Knuckle Heavy Weight Hinges Stainless Steel Base

CH-CB75 4C81CB1901R 3CB1HW BB3300AB750 LB8004TA786 CB75 DH-CB8003 Knuckle Heavy Weight Hinges

Steel Base

CH-BB68 4B81FBB168CB168 5BB1HW BB5200BB1168 BB5004T4A3786 BB68 DH-BB168

5 Knuckle Heavy Weight Hinges Steel Base

CH-CB80 CB21CB1960R 3CB1 N/AAB800 LB8001TA314 CB80 DH-CB700BR3 Knuckle Standard Weight Hinges

Brass Base (All except US32D)

CH-CB85 4C51CB1961R 3CB1HW BB3300-630AB850 LB8006TA386 CB85 DH-CB800SS3 Knuckle Heavy Weight Hinges

Stainless Steel Base

QUICK HINGE CROSS REFERENCE SHEET




Page 43



1/4”5/8”

How to Measure a Hinge Reference

4.5”

4.0”

Example: 4.5 x 4.0

Height x Width

NOTES

Note: Optional Radius Corner dimensions if applicable

"Striving for Simplicit y through innovation!"

4-2245 Royal Windsor Road, Mississauga ON L5J 1K5 | Phone: (855) 823-3002 Fax: (905) 823-1249

THE COMMAND ACCESS COMMITMENT

www.CommandAccess.com

www.ConnectionNetwork.ca



Documents

Price List 4242 - Command Access List 4242 TERMS ... Lawrence, LSDA, Marks, Marshal-Best, Molex, Omnia, PBB, PDQ, Ramco, TA West, Trans Atlantic or any of their subsidiaries or