971.224.2188 Local draperysales@cascadecoil.com

971.224.2199 Fax www.cascadecoil.com800.999.2645 Toll Free

2012 MESH & HARDWARE PRICE GUIDELINESEffective May 15, 2012

Domestic Commercial

The products featured in this price list are manufa ctured in the USA

Projects include multi-story wire mesh draperies for hotels, auditoriums, and casinos; curved dividers for visual merchandising; window treatments for private homes; safety screening for industrial settings; sculptural forms for urban gardens; decorative interior/exterior wall coverings for buildings and parking garages; aviary round

weave screening for animal habitats, and see-through appealing barriers for commercial security.

Cascade Coil Drapery’s woven wire fabric is bold, modern, and innovative. The fabric diffuses and enhances lighting without blocking views or ventilation and the durable metal-tone finishes do not fade or darken. Low

maintenance, flexible, lightweight panels are easy to install and will adapt to most standard drapery hardware.

Manufacturers of Architectural Woven Wire Drapery for Security & Safety, Window Treatments, Interior/Exterior Wall Coverings, Partitions, Building Cladding, Lighting Effects, Blast Mitigation, Fireplace

Screens and Other Unique Uses.

Architectural Coil Drapery | GuardianCoil®

Price Guidelines

Steel Sprayed Mesh Aluminized Steel MeshSTL015210 3/32” 21 ga 19.85 – 15.15 ALS060180 3/8” 18 ga 14.05 – 8.65STL020200 1/8” 20 ga 21.25 – 16.95 ALS080180 1/2” 18 ga 15.65 – 6.85STL030195 3/16” 19-1/2 ga 17.95 – 12.45 ALS100180 5/8” 18 ga 15.05 – 6.15STL040195 1/4” 19-1/2 ga 16.05 – 12.75STL040190 1/4” 19 ga 16.55 – 12.85 Stainless Steel MeshSTL050190 * 5/16” 19 ga 14.45 – 10.55 SS6015210 3/32” 21 ga 33.45 – 29.25STL050180 5/16” 18 ga 18.15 – 13.95 SS4020200 1/8” 20 ga 32.35 – 24.65STL050160 5/16” 16 ga 23.15 – 15.45 SS4030190 3/16” 19 ga 31.25 – 25.65STL060160 3/8” 16 ga 21.25 – 14.15 SS4030195 3/16” 19-1/2 ga 29.15 – 22.75STL080160 1/2” 16 ga 19.15 – 12.05 SS4040180 1/4” 18 ga 34.25 – 26.65STL100160 * 5/8” 16 ga 19.35 – 10.65 SS4040190 1/4” 19 ga 25.95 – 21.65

SS4050180 5/16” 18 ga 29.65 – 22.45Aluminum Mesh SS4050190 * 5/16” 19 ga 25.75 – 18.55ALM015200 3/32” 20 ga 20.25 – 16.85 SS4060140 * 3/8” 14 ga 39.75 – 27.85ALM020180 1/8” 18 ga 23.95 – 20.55 SS4060160 3/8” 16 ga 28.15 – 20.95ALM030180 3/16” 18 ga 18.85 – 15.65 SS4080140 * 1/2” 14 ga 33.55 – 21.45ALM040180 1/4” 18 ga 16.55 – 14.65 SS4080160 1/2” 16 ga 21.75 – 15.55ALM050150 5/16” 15 ga 19.05 – 16.35 SS4100140 5/8” 14 ga 23.95 – 14.45ALM050180 5/16” 18 ga 13.45 – 12.05 SS4100160 * 5/8” 16 ga 19.55 – 11.85ALM060150 3/8” 15 ga 18.25 – 14.65ALM080150 1/2” 15 ga 15.95 – 12.35ALM100150 5/8” 15 ga 15.65 – 10.75 Copper Clad Steel Mesh

CCS015200 3/32” 20 ga 35.25 – 28.25Brite Nickel Mesh CCS020180 1/8” 18 ga 47.25 – 30.35BNI015210 3/32” 21 ga 33.65 – 28.25 CCS030180 3/16” 18 ga 37.35 – 27.45BNI020200 1/8” 20 ga 33.85 – 24.95 CCS040180 1/4” 18 ga 34.45 – 27.75BNI030195 3/16” 19-1/2 ga 26.65 – 22.55 CCS050180 5/16” 18 ga 23.75 – 18.55BNI040195 1/4” 19-1/2 ga 24.45 – 20.55 CCS060160 3/8” 16 ga 25.95 – 19.55BNI050180 5/16” 18 ga 27.75 – 22.75 CCS080160 1/2” 16 ga 30.35 – 17.85BNI060160 3/8” 16 ga 33.55 – 25.95 CCS100160 5/8” 16 ga 23.25 – 15.35BNI080160 1/2” 16 ga 33.35 – 22.05BNI100160 5/8” 16 ga 32.95 – 20.05 Nylon/Galvanized Mesh

NGC015210 3/32” 21 ga 26.75 – 19.05“Silver” Tin Steel Mesh NGC020200 1/8” 20 ga 25.75 – 18.05STN015210 3/32” 21 ga 19.15 – 15.75 NGC030190 3/16” 19 ga 18.15 – 13.45STN020190 1/8” 19 ga 27.65 – 20.75 NGC040190 1/4” 19 ga 16.95 – 13.75STN030190 3/16” 19 ga 18.15 – 14.05 NGC050180 * 5/16” 18 ga 16.45 – 12.05STN040190 1/4” 19 ga 17.85 – 13.75 NGC050190 5/16” 19 ga 15.55 – 11.05STN050190 5/16” 19 ga 13.75 – 10.65 NGC060140 3/8” 14 ga 33.35 – 24.15STN060160 3/8” 16 ga 18.95 – 13.95 NGC060160 3/8” 16 ga 20.85 – 15.65STN080160 1/2” 16 ga 17.85 – 12.85 NGC080140 * 1/2” 14 ga 31.05 – 21.55STN100160 5/8” 16 ga 24.95 – 12.05 NGC080160 1/2” 16 ga 17.95 – 12.05

NGC100140 * 5/8” 14 ga 26.25 – 16.75Solid Brass Mesh NGC100160 5/8” 16 ga 15.25 – 10.25

SBR030190 3/16” 19 ga 32.35 – 23.75SBR040190 1/4” 19 ga 27.65 – 21.25 Samples

Galvanized Steel Mesh

GST015200 3/32” 20 ga 22.55 – 15.45GST040180 1/4” 18 ga 14.55 – 10.85GST050180 5/16” 18 ga 16.95 – 12.05

Price Range

Price Range

Price Range

Price Range

Price Range

Individual samples of each weave are available upon request. Bulk quantities may be ordered at $.50 each. Large and special finish samples may be ordered at the standard square foot price plus applicable set-up charges.

Type 304 standard except 3/32” is type 316.

Price Range

Cascade fabrics are priced by the square foot. Pricing varies by weave and by square foot area. The tables below show the price ranges for standard weaves between 50 and 5000 square feet. For specific pricing information contact our customer service department. (*Denotes Special Non-Standard Weave)

Price Range

Price Range

Price Range

Price Range

611-010 Domestic Commercial 2 of 12 ©2012 Cascade Coil Drapery, Inc.

Measurements

Square feet are computed from opening measurements plus fullness rounded up to the nearest square foot.

Fullness added recommendations: Standard 50%-100% Box pleating 100%Semi-Security 3% Blast Mitigation 100%-150%

Note: Fullness is the percentage of extra mesh added to create the desired pleating effect. Track systems require a minimum fullness of 15%

Finishes

Finish � RecommendedAnimal

EnclosuresMetaltone (Aluminum, Steel, Stainless Steel)

Satin Gold � � � �

Satin Brass � � � �

Satin Black � � � �

Steel Gray � � � �

Alumabrite � � � �

Brilliant Aluminum � � � �

Satin Bronze � � � �

Red Bronze � � � �

Grape Bronze � � � �

Satin Copper � � � �

Antique Copper � � � �

Antique Bronze � � � �

Gunmetal Black � � � �

Clear LacqueredBrite Pearl Gray (Aluminum Only) � � � �

Brightened (Aluminum Only) � � � �

Brite Nickel � � �

Brite Steel � � � �

“Silver” Tin Plated Steel � � �

Solid Brass � � �

Copper Clad Steel � � � �

NaturalAluminum � � � � �

Stainless Steel Type 316 � � � � � � �

Stainless Steel Type 304 � � � � � � �

Nylon Coated Galvanized Steel � � � � � �

Aluminized Steel � � � � �

Galvanized Steel � � � � �

UltraBlack � � �

Application

We offer a wide array of finishes to meet your application and design requirements. Designer metallic powder finishes may be special ordered. Durable acrylic lacquer coatings are available in a wide range of custom colors that can be matched to color chips. Nylon coated weaves are available in a variety of bright metallic and deep color finishes.

The minimum order is 50 sq. ft. Orders below minimum will be priced at 50 sq. ft. or a set-up fee will be added (whichever is less). Additional cutting and processing surcharges will be assessed for panels under 5 ft. or over 20 ft. in height.

Cascade Coil quotations are based upon dimensions given by the client. While drawings and architectural plans may be helpful in interpreting the application, it is the responsibility of the customer to provide accurate measurements.

The term “coil length” refers to the length of the wire coil. Under most circumstances, the coil length is also the vertical measurement. In applications such as a banner where the material is “turned on its side” the coil length may be the horizontal measurement. For further clarification contact Cascade Coil.

The most common measuring error involves the height of opening. It is important that this measurement is accurate. Care must be taken to allow for floors or carpeting that may not be installed at the time measurements are taken. Deductions for track and floor allowance will be made by Cascade Coil prior to production. If the mesh is too long, it will need to be returned to Cascade Coil where it can be properly cut to size. There is no method for adding length to mesh. If it is too short, the order will need to be rewoven.

Indoor Outdoor

“The details and material express the modern aspects of

design while creating an environment of

harmony, tranquility, and intimacy that could not be achieved without

the Cascade Coil Drapery.” –Nicole

Dalton, Paul Steelman Design Group

Architectural Safety Security Blast

611-010 Domestic Commercial 3 of 12 ©2012 Cascade Coil Drapery, Inc.

Special Finish Options & Miscellaneous ChargesSpecial finishes are priced per sq. foot of fabric.

Option# Price FN15AMIN 203.95FN11 0.75FN12 1.35FN15A 0.85FN15B 0.55FN90 -3.15

Anodized Clear, Black, Light or Medium Bronze Alumi num Will not fade outdoors. The charges are added to the standard square foot price (X=Volume Bracket).

Part # A B C D E FFN100X - Clear 5.05 3.05 2.35 2.25 2.25 2.25FN104X - Black* 10.15 8.15 7.45 7.35 7.35 7.35FN105X - Bronze* 8.75 6.75 6.05 5.75 5.75 5.75* Requires an additional cutting charge for anodized bronze, or black calculated per linear foot. See table below.

Special Anodized Cutting Charges

Black, Light Bronze, Medium BronzeOption # Weave Price

ECA015 3/32” 15.15ECA020 1/8” 13.25ECA030 3/16” 12.75ECA040 1/4” 11.65ECA050 5/16” 11.05ECA060 3/8" 10.55 Under and Over HeightECA080 1/2" 10.55ECA100 5/8" 10.55ECA120 7/8" 10.55

Other Anodized Aluminum FinishesMax. Coil Length

Clear, Black, Bronze 20’ 0” Under Height/Extra Cutting ChargeGold, Red, Blue, Lavender, etc. 11’ 8” Option # Weave Price Green, Orange, Yellow, Teal 5’ 0” UH015 3/32” 19.05

UH020 1/8” 18.05UH030 3/16” 16.55UH040 1/4” 16.15UH050 5/16” 15.35

Slope Cuts UH060 3/8" - 7/8" 15.25

Over Height ChargeOption # Description Price Option # Height Surcharg e

SL10 Slope 14.95 OH20 20' + 10%OH25 25' + 15%OH30 30' + 20%OH35 35' + 25%OH40 40' + 30%OH45 45' + 40%

“Like a fly on the wall, I still hear a buzz from patrons about the Cascade Coil Drapery. Light can dramatically change a room’s mood – The wire mesh extends that mood into motion.” –Dava Guthmille,. Noise 13 Design

Additional coat clear lacquer

Description Minimum Special Finish Charge

Anodized Colors

2 additional coats clear lacquer (less than 500 sf)Special Color lacquer finish (less than 500 sf)Special lacquer finish (500 sf plus)No finish - Deduction

There is a special cutting charge for slope cuts calculated per linear ft.

A surcharge is added for orders under 5 ft. or over 20 ft. in height. The under height price is calculated per excess linear foot of fabric. The over height surcharge is a percentage add to the mesh price.

611-010 Domestic Commercial 4 of 12 ©2012 Cascade Coil Drapery, Inc.

Weights, Opening Percentages and Shading

0% Fulness 50% Fulness 100% Fulness 0% Fulness 50% Fuln ess 100% Fulness3/32” 20 Aluminum 0.0348 0.25 LBS/SF 64% 52% 41% 36% 48% 59%1/8” 18 Aluminum 0.0475 0.45 LBS/SF 68% 57% 46% 32% 43% 54%3/16” 18 Aluminum 0.0475 0.38 LBS/SF 66% 55% 44% 34% 45% 56%1/4” 18 Aluminum 0.0475 0.34 LBS/SF 71% 61% 50% 29% 39% 50%5/16” 18 Aluminum 0.0475 0.26 LBS/SF 64% 52% 41% 36% 48% 59%5/16” 15 Aluminum 0.072 0.59 LBS/SF 64% 52% 41% 36% 48% 59%3/8" 15 Aluminum 0.072 0.52 LBS/SF 50% 38% 25% 50% 63% 75%1/2" 15 Aluminum 0.072 0.37 LBS/SF 72% 62% 52% 28% 38% 48%5/8" 15 Aluminum 0.072 0.27 LBS/SF 78% 69% 61% 22% 31% 39%

3/32” 21 Carbon Steel 0.0318 0.59 LBS/SF 64% 52% 41% 36% 48% 59%1/8” 20 Carbon Steel 0.0348 0.75 LBS/SF 68% 57% 46% 32% 43% 54%3/16” 19.5 Carbon Steel 0.038 0.53 LBS/SF 66% 55% 44% 34% 45% 56%1/4” 19.5 Carbon Steel 0.038 0.53 LBS/SF 71% 61% 50% 29% 39% 50%1/4” 16 Carbon Steel 0.0625 1.73 LBS/SF 71% 61% 50% 29% 39% 50%5/16” 19 Carbon Steel 0.041 0.33 LBS/SF 64% 52% 41% 36% 48% 59%5/16” 18 Carbon Steel 0.0475 0.56 LBS/SF 64% 52% 41% 36% 48% 59%5/16” 16 Carbon Steel 0.0625 1.36 LBS/SF 64% 52% 41% 36% 48% 59%3/8" 16 Carbon Steel 0.0625 0.98 LBS/SF 50% 38% 25% 50% 63% 75%1/2" 16 Carbon Steel 0.0625 0.77 LBS/SF 72% 62% 52% 28% 38% 48%5/8" 16 Carbon Steel 0.0625 0.54 LBS/SF 78% 69% 61% 22% 31% 39%

3/32” 21 Stainless Steel 0.0318 0.60 LBS/SF 64% 52% 41% 36% 48% 59%1/8” 20 Stainless Steel 0.0348 0.77 LBS/SF 68% 57% 46% 32% 43% 54%3/16” 19.5 Stainless Steel 0.038 0.65 LBS/SF 66% 55% 44% 34% 45% 56%3/16” 19 Stainless Steel 0.041 0.83 LBS/SF 66% 55% 44% 34% 45% 56%1/4” 19 Stainless Steel 0.041 0.66 LBS/SF 71% 61% 50% 29% 39% 50%1/4” 18 Stainless Steel 0.0475 1.03 LBS/SF 71% 61% 50% 29% 39% 50%5/16” 19 Stainless Steel 0.041 0.54 LBS/SF 64% 52% 41% 36% 48% 59%5/16” 18 Stainless Steel 0.0475 0.77 LBS/SF 64% 52% 41% 36% 48% 59%3/8" 16 Stainless Steel 0.0625 1.08 LBS/SF 50% 38% 25% 50% 63% 75%3/8" 14 Stainless Steel 0.08 1.08 LBS/SF 50% 38% 25% 50% 63% 75%1/2" 16 Stainless Steel 0.0625 0.77 LBS/SF 72% 62% 52% 28% 38% 48%1/2" 14 Stainless Steel 0.08 0.77 LBS/SF 72% 62% 52% 28% 38% 48%5/8" 16 Stainless Steel 0.0625 0.79 LBS/SF 78% 69% 61% 22% 31% 39%5/8" 14 Stainless Steel 0.08 0.79 LBS/SF 78% 69% 61% 22% 31% 39%

3/32” 21 Brite Nickel 0.0318 0.72 LBS/SF 64% 52% 41% 36% 48% 59%1/8” 20 Brite Nickel 0.0348 0.68 LBS/SF 68% 57% 46% 32% 43% 54%3/16” 19.5 Brite Nickel 0.038 0.68 LBS/SF 66% 55% 44% 34% 45% 56%1/4” 19.5 Brite Nickel 0.038 0.60 LBS/SF 71% 61% 50% 29% 39% 50%5/16” 18 Brite Nickel 0.0475 0.76 LBS/SF 64% 52% 41% 36% 48% 59%3/8" 16 Brite Nickel 0.0625 1.44 LBS/SF 50% 38% 25% 50% 63% 75%1/2" 16 Brite Nickel 0.0625 0.77 LBS/SF 72% 62% 52% 28% 38% 48%5/8" 16 Brite Nickel 0.0625 0.65 LBS/SF 78% 69% 61% 22% 31% 39%

3/32” 21 Silver Tin 0.0318 0.72 LBS/SF 64% 52% 41% 36% 48% 59%1/8” 19 Silver Tin 0.041 0.95 LBS/SF 68% 57% 46% 32% 43% 54%3/16” 19 Silver Tin 0.041 0.80 LBS/SF 66% 55% 44% 34% 45% 56%1/4” 19 Silver Tin 0.041 0.74 LBS/SF 71% 61% 50% 29% 39% 50%5/16” 19 Silver Tin 0.041 0.40 LBS/SF 64% 52% 41% 36% 48% 59%3/8" 16 Silver Tin 0.0625 1.15 LBS/SF 50% 38% 25% 50% 63% 75%1/2" 16 Silver Tin 0.0625 0.90 LBS/SF 72% 62% 52% 28% 38% 48%5/8" 16 Silver Tin 0.0625 0.65 LBS/SF 78% 69% 61% 22% 31% 39%

3/32” 21 Nylon Galv. 0.0318 0.59 LBS/SF 64% 52% 41% 36% 48% 59%1/8” 20 Nylon Galv. 0.0348 0.75 LBS/SF 68% 57% 46% 32% 43% 54%3/16” 19 Nylon Galv. 0.041 0.80 LBS/SF 66% 55% 44% 34% 45% 56%1/4” 19 Nylon Galv. 0.041 0.74 LBS/SF 71% 61% 50% 29% 39% 50%5/16” 19 Nylon Galv. 0.041 0.33 LBS/SF 64% 52% 41% 36% 48% 59%5/16” 18 Nylon Galv. 0.0475 0.45 LBS/SF 64% 52% 41% 36% 48% 59%3/8" 16 Nylon Galv. 0.0625 0.98 LBS/SF 50% 38% 25% 50% 63% 75%3/8" 14 Nylon Galv. 0.08 0.98 LBS/SF 50% 38% 25% 50% 63% 75%1/2" 16 Nylon Galv. 0.0625 0.70 LBS/SF 72% 62% 52% 28% 38% 48%1/2" 14 Nylon Galv. 0.08 1.26 LBS/SF 72% 62% 52% 28% 38% 48%5/8" 16 Nylon Galv. 0.0625 0.54 LBS/SF 78% 69% 61% 22% 31% 39%5/8" 14 Nylon Galv. 0.08 0.79 LBS/SF 78% 69% 61% 22% 31% 39%

3/32” 20 Copper Clad 0.0348 0.79 LBS/SF 64% 52% 41% 36% 48% 59%1/8” 18 Copper Clad 0.0475 1.00 LBS/SF 68% 57% 46% 32% 43% 54%3/16” 18 Copper Clad 0.0475 0.84 LBS/SF 66% 55% 44% 34% 45% 56%1/4” 18 Copper Clad 0.0475 0.75 LBS/SF 71% 61% 50% 29% 39% 50%5/16” 18 Copper Clad 0.0475 0.58 LBS/SF 64% 52% 41% 36% 48% 59%3/8" 16 Copper Clad 0.0625 0.85 LBS/SF 50% 38% 25% 50% 63% 75%1/2" 16 Copper Clad 0.0625 0.69 LBS/SF 72% 62% 52% 28% 38% 48%5/8" 16 Copper Clad 0.0625 0.67 LBS/SF 78% 69% 61% 22% 31% 39%

Approximate Opening % Approximate Shade %Weave Guage Wire Type Wire Thickness Weight

Pocket Storage

Model Track 100% FullnessT025 Spectrack 2.87”/LF OP.T245 All Steel I-Beam 1.6”/LF OP.T145 Light I-Beam 1.85”/LF OP.T045 Heavy I-Beam 3.25”/LF OP.T075/85 Secura 4.71”/LF OP.T035/37 1300 Series 4.71”/LF OP.

Track & Carriers

SpecTrack System 1-1/8"X 3/4"

Option # Description A B Unit of MeasureT025X Clear Anodized Finish - Aluminum 21.45 19.85 Per linear ft. of opening widthT026X Special Finish - Aluminum 30.55 26.15 Per linear ft. of opening widthT020X Spectra Carriers and chain installed. No track or brackets 16.45 15.35 Per linear ft. of fabricT021X Spectra Carriers Only (4" O.C.) 20.15 13.95 Per linear ft. of fabricT022 Master Carriers Spectrack Per Set

Maximum Weight/Carrier 20 lbs.

Maximum Opening 32 ft.

Maximum Total Weight 80 lbs.

Light Steel I-Beam Track System 1/4" X 5/8" with Al l Steel Components

Option # Description A B Unit of Measure

T245X Light I-Beam Track – Steel. Includes all metal carriers and self pleating chain installed on fabric 22.75 19.35 Per linear ft. of opening width

T240X Light I-Beam Carriers and chain installed. No track/bracket 14.45 12.35 Per linear ft. of fabricT241X Light I-Beam Carriers Only (4" O.C.) 14.25 10.95 Per linear ft. of fabric

Deluxe Steel I-Beam Track System 1/4" X 5/8" with A luminum Mounting Hardware

Option # Description A B Unit of Measure

T145X Light I-Beam Track – Steel. Includes all metal carriers and self pleating chain installed on fabric 25.35 23.45 Per linear ft. of opening width

T140X Light I-Beam Carriers and chain installed. No track/bracket 22.15 20.05 Per linear ft. of fabricT141X Light I-Beam Carriers Only (4" O.C.) 21.95 17.35 Per linear ft. of fabricWB004L Wall Brackets Per linear ft. of opening width

Pocket storage space is determined by the track type and the fabric fullness. The required space shown in the table is per linear foot opening and is intended to be a guide. Exact requirements can be provided once the specifics of your project have been identified.

All prices are calculated on stated unit of measurement. Any fraction of a foot will be priced as one foot. Minimum opening width or height equals 3' 0" Carrier and S-Hook prices are based on linear fabric width. Standard carrier spacing is four opening inches on center. A labor surcharge will be assessed for spacing closer than four inches. Note: In the tables below the “X” in the Option # is for the volume bracket (“A” for 3 to 20 feet and “B” for more than 20 feet). “O.C.” indicates On Center.

Recommended for steel to 9' high or aluminum to 12' high hand traverse. This track is only appropriate for ceiling mounting applications. Items T025 and T026 include Spectra Nylon wheel carriers and self-pleating chain installed on mesh.

Recommended for light duty installations of steel or aluminum up to 6' high hand traverse. Can be easily curved. Item T245 includes all steel I-Beam wheel carriers and self-pleating chain installed on mesh. Ceiling brackets or wall brackets are included in the price.

49.75

50% Fullness2.15”/LF OP.1.2”/LF OP.1.6”/LF OP.

2.15

2.8”/LF OP. 3.56”/LF OP.3.56”/LF OP.

Recommended for light duty installations of steel or aluminum up to 6' high hand traverse. Can be easily curved. Item T145 includes I-Beam Nylon wheel carriers and self-pleating chain installed on mesh. Ceiling brackets are included in the pricing.

611-010 Domestic Commercial 6 of 12 ©2012 Cascade Coil Drapery, Inc.

Track & Carriers Cont.

Heavy I-Beam Track System 7/16" X 15/16"

Option # Description A B Unit of Measure

T045X Clear Anodized Finish Only - Aluminum Nylon Wheel Carriers 29.25 27.75 Per linear ft. of opening width

T040X I-Beam Nylon Wheel carriers/chain installed. No track/brackets 25.35 23.65 Per linear ft. of opening width

T041X I-Beam Nylon Wheel carriers only (4" O.C.) 22.75 17.85 Per linear ft. of fabricT042 Master Carriers Heavy Duty I-Beam track Per set

T043N Suspension tube for I-Beam 3/4" X 3/4" Clear Anodized Aluminum Per linear ft. of tube

T043S Suspension tube for I-Beam 3/4" X 3/4" Special Finish Aluminum Per linear ft. of tube

T044 I-Beam Suspension Bracket Set Per setWB004 Wall Brackets Per linear ft. of opening width

Maximum Weight/Carrier 20 lbs.

Maximum Opening 32 ft.

Maximum Total Weight 80 lbs.

Secura Track System - Galvanized Steel 1-7/16" X 1-1/4"

Option # Description A B Unit of Measure T075X Galvanized Steel Track System 46.55 43.95 Per linear ft. of opening widthT076X Special Finish Steel Track System 55.55 50.05 Per linear ft. of opening widthT071X Secura Trolleys (6" O.C.) No Track or Brackets 24.85 24.35 Per linear ft. of fabricT075C45 Standard 45 degree 24" Radius Curve surcharge Added per curveT075C90 Standard 90 degree 24" Radius Curve surcharge Added per curveWB005 Wall Brackets Per linear ft. of opening widthBC001 Ceiling Brackets Per linear ft. of opening widthBC002 3/8" Threaded Rod Support Brackets Per linear ft. of opening widthBC003 Chain/Cable Support Brackets Per linear ft. of opening width

Secura Track System - Aluminum 1-7/16" X 1-1/4"

Option # Description A B Unit of Measure T085X Clear Anodized Aluminum Track System 42.65 41.25 Per linear ft. of opening widthT086X Special finish Aluminum Track System 51.45 45.15 Per linear ft. of opening widthT071X Secura Trolleys (6" O.C.) No Track or Brackets 24.85 24.35 Per linear ft. of fabric

5.35

Recommended for steel or aluminum all heights. Can be easily curved. Item T045 includes I-Beam Nylon wheel carriers and self-pleating chain installed on mesh. Ceiling brackets are included in the pricing.

59.15

6.85

11.2532.95

“The delicate details and feel of the material help to express the modern technological aspects of the design, yet their effect creates an environment of harmony and tranquility. Cascade Coil Drapery added a feeling and effect that could not be achieved with other fabrics or materials.” –David Fenster, AIA

Recommended for heavy duty projects. Well suited for security or industrial safety where opening widths are substantial. Items T075 and T076 include large Nylon Wheel Trolleys at 6" O.C. with pleating chain and end stops. Brackets are not included in the pricing (see below for pricing). Contact us regarding special curved tracks.

144.6589.95

Recommended for heavy duty projects. Well suited for security or industrial safety where opening widths are substantial. Items T085 and T086 include large Nylon Wheel Trolleys at 6" O.C. (no pleating chain). Brackets and curves are not currently available.

4.255.75

10.158.95

611-010 Domestic Commercial 7 of 12 ©2012 Cascade Coil Drapery, Inc.

Track & Carriers Cont.

1300 Series Track System

Option # Description A B Unit of Measure T035X Heavy I-Beam Track – Aluminum 89.85 87.75 Per linear ft. of opening width

T031X Nylon Ball Bearing Carriers (6" O.C.) No track or brackets 51.55 51.25 Per linear ft. of fabric

BT002 Bending Tool Each

Maximum Weight/Carrier 13 lbs.

Maximum Opening None

Maximum Per Foot 26 lbs.

Motorized track systems

“Cascade’s metal mesh appears to float as a luminous scrim behind the back-bar’s liquor riser.

Silhouetted forms glide serenely behind the light and metal tapestry, tempting club guests and enhancing the sensuousness of the space.” –Lionel Ohayon,

I©RAVE Design Studio

225.55

Recommended for heavy duty projects. Well suited for security or industrial safety where opening widths are substantial. Item T035 includes large nylon ball bearing carriers at 6" O.C., endstops, and ceiling brackets. This track can easily be curved to a mimimum radius of 24" using the optional bending tool.

Motorized track systems are recommended for drawing curtains longer than 20’, taller than 14’, or that weigh more than 150 pounds. We also recommend motorization for most security screen installations in commercial applications. Cascade Coil Drapery does not supply motorized track systems, but can recomend compatilble systems as needed.

611-010 Domestic Commercial 8 of 12 ©2012 Cascade Coil Drapery, Inc.

Special Hardware Options

Self-Pleating Chains and S-Hooks

Option # Description A B Unit of Measure

T010X Self-pleating chain installed (No carriers or other hardware) 15.55 8.95 Per linear ft. of opening width

T015X Attach 1" S-Hooks (6" O.C.) 4.15 3.35 Per linear ft. of opening widthT016X Attach 1 3/4" S-Hooks (6" O.C.) 4.65 3.65 Per linear ft. of fabricT016SSX Attach 1 3/4" Stainless Steel S-Hooks (6" O.C.) 7.15 6.15 Per linear ft. of fabric

Mounting Angles Recommended for fixed mesh installations using S-Hooks.Option # Description A B Unit of Measure T017SX Angle drilled for 1" S-Hooks, Clear Anodized 6.15 5.15 EachT018SX Angle drilled for 1" S-Hooks, Special Finish 10.55 9.05 EachT017LX Angle drilled for 1 3/4" S-Hooks, Clear Anodized 6.15 5.15 EachT018LX Angle drilled for 1 3/4" S-Hooks, Special Finish 10.55 9.05 Each

Top and Bottom TrackTesting charge to assure proper fabric movement with top and bottom track. Option# Description Price

S552 Set-up charge per each opening height 206.35

Standard Box Pleating Mesh must be ordered using 100% fullness with Box Pleating option. Available on most track systems.Option # Description A B B330X 3/16” Weave 10.15 8.85B340X 1/4” Weave 5.05 4.45

BatonsHighly recommended for all commercial drapery applications (especially room dividers).

Option # Description Price Ea. BT36 0 16.25BT48 0 22.65BT60 0 24.45BT72 0 24.65BT48P 0 23.55BT60P 0 25.35BT72P 0 23.95

Vertical Edge ProtectionHighly recommended for all traverse installations typically placed 4 to 8 ft O.C.Option # Description A B Unit of Measure V105X 3/8" - 1/2" Weaves Clear Anodized - Aluminum 7.55 6.55 Per linear ft.V106X 3/8" - 1/2" Weaves Special Finishes - Aluminum 9.85 9.15 Per linear ft.

Unit of Measure Each

BT36

T010 T010 & T015/16 T015/16

BT48/60/72

611-010 Domestic Commercial 9 of 12 ©2012 Cascade Coil Drapery, Inc.

Security Hardware For More Information See Security Brochure 611-003

Locking Hook Bolt SystemRecommended for all openings over 6' 8" high and heavier security applications for all heights.Option # A B Unit of Measure L200XS EachL210XS EachV107X 9.35 9.05 Per linear ft.V108X 12.65 12.05 Per linear ft.V109X 11.75 10.75 Per linear ft.V110X 13.35 12.05 Per linear ft.V111X 7.35 6.85 Per linear ft.V112X 9.75 8.65 Per linear ft.V119X 19.65 18.65 Per linear ft.V120X 23.55 25.45 Per linear ft.

Locking Hasp SystemRecommended for all openings under 6' 8"high or for light security applications up to 8'0"high.Option # A B Unit of Measure L220LH EachV105X 7.55 6.55 Per linear ft.V106X 9.85 9.15 Per linear ft.V113X 5.15 4.25 Per linear ft.V114X 8.05 6.95 Per linear ft.V117X 4.45 4.35 Per linear ft.V118X 8.05 7.95 Per linear ft.

Wall Connection – Aluminum Vertical Channels

Option # A B Unit of Measure V113X 5.15 4.25 Per linear ft.V114X 8.05 6.95 Per linear ft.V105X 7.55 6.55 Per linear ft.V106X 9.85 9.15 Per linear ft.

Positive Lock Footbolt & Handles

Option # Price Unit of Measure S525 197.95 Each L215S520 175.95 EachS520-L Locking Footbolt Installed on Stiffener Channel 330.95 EachL215 49.05 Each

S525 S520 S520-L

145.95

256.85233.05

For Lock, Jamb, Special Finish

Description Hook Bolt Lock, Keyed 1 Side Hook Bolt Lock, Keyed 2 SidesFor Lock, Clear Anodized For Lock, Special Finish For Mesh/Receiver, Clear Anodized For Mesh/Receiver, Special Finish For Wall Receiver, Clear Anodized For Wall Receiver, Special Finish

Description Chrome Locking Hasp For Lock, Clear Anodized

Stiffener Channel, Clear Anodized Stiffener Channel, Special Finish

Positive Lock Footbolt Kit Positive Lock Footbolt Installed on Lock Channel

Handle Installed

For Lock, Special Finish For Lock, Jamb, Clear Anodized

Mesh Receiver, Clear Anodized Mesh Receiver, Special Finish

Description

Description Wall Jamb, Clear Anodized Wall Jamb, Special Finish

Wall Jamb Extension, Clear Anodized Wall Jamb Extension, Special Finish

611-010 Domestic Commercial 10 of 12 ©2012 Cascade Coil Drapery, Inc.

Blast Mitigation For More Information See GuardianCoil® Brochure 613-004

Control Chain SystemRequired for all openings in a Blast Mitigation application.Option # A B Unit of Measure T012X 25.65 21.65 Per linear ft.T012XP 27.95 23.85 Per linear ft.T013 EachT013P EachT019 EachT019P Each

Secura Track System for GuardianCoil® - Galvanized Steel 1-7/16" X 1-1/4"

Option # A B Unit of Measure T075GX 52.85 51.35 Per linear ft.T076GX 60.35 57.85 Per linear ft.

50.8551.3583.0587.45

Recommended for blast mitigation projects. Designed for applications where opening widths are substantial and need to withstand blast forces. Items T075G and T076G include large Nylon Wheel Trolleys at 6" O.C. with pleating control chain, end stops and galvanized or stainless steel hardware. Brackets are not included in the pricing.

Special Finish Steel Track System

Reinforcing Mesh Connection Kit, Special FinishControl Plate w/ Chain BoltControl Plate w/ Chain Bolt, Painted

Description

Description Control Chain Only, InstalledControl Chain Only, Installed, Special FinishReinforcing Mesh Connection Kit

Galvanized Steel Track System

GuardianCoil® has been used in a number of window

applications as a preventative measure against objects

or projectiles from entering the structure. One of the

largest projects to date was at the US Federal

Courthouse in El Paso, Texas where the mesh is

intended to provide protection from harm to judges

and court staff.

611-010 Domestic Commercial 11 of 12 ©2012 Cascade Coil Drapery, Inc.

Terms and ConditionsPricing

Terms

Shipping

Limited Warranty Policy

P.O. Box 370719505 S.W. 90th CourtTualatin, Oregon 97062

800.999.2645 Toll Free971.224.2188 Local971.224.2199 Faxwww.cascadecoil.comdraperysales@cascadecoil.com

Quotations are valid for 30 days unless otherwise stated in writing. Prices are subject to change without notice. Cascade Coil Drapery prices do not include sales, user, excise or other taxes. For shipments outside the United States, prices do not include duty or custom brokerage fees. Cascade Coil Drapery reserves the right to revoke a quotation at any time, and for any reason.

A 50% deposit is required upon placement of order. The balance must be received before shipment. Visa, MasterCard, and American Express are accepted.

Cascade Coil Drapery manufactures all of its products in its new facility in Tualatin, Oregon.

Cascade Coil Drapery, Inc. shall not be liable for incidental or consequential damages including, but not limited to, loss of profits or revenue, loss of use of the product or any associated product, cost of capital, cost of substituted products, services, downtime costs, or claims of customers of the purchaser for such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitaion or exclusion may not apply.

Defective products, or parts of products should be returned at customer’s expense to Cascade Coil Drapery. Contact the company for information on return material procedures. This warranty gives the customer specific legal rights, and they may also have other rights which vary from state to state.

Estimated ship dates in proposals are based on historic averages and are not guaranteed. The customer may request an approximate ship date upon placement of order. This date will be based on wire availability and the current weaving schedule. In the event that the wire mesh is required for an opening or event, every effort will be made to meet a deadline. Because of unforeseen circumstances in production and shipping, Cascade Coil cannot guarantee an exact shipping date. Therefore, it is important that an order be placed in sufficient time to allow for such variables. For urgent requirements, Cascade Coil may be able to guarantee a rapid delivery date. A rush surcharge may be assessed.

Cascade Coil Drapery, Inc. will replace or repair any products or parts of products that are defective due to faulty materials or poor workmanship. The replacement of defective products by Cascade Coil Drapery will be without charge. The warranty extends only to the original purchaser for one year from the date of purchase. This warranty does not apply to (1) products damaged by accident, neglect, misuse or abuse, or (2) costs of removal or reinstallation of defective products.

611-010 Domestic Commercial 12 of 12 ©2012 Cascade Coil Drapery, Inc.