A-1

A

July, 2017Section A

FORD CORPORATION STOPS AND BALLCORPSECTION A

Note: See item listings in catalog section to ensure that desired sizes and options are available.

C C T C S

Pack Joint Nut Grip Joint Nut(-G)

Quick Joint Nut(-Q)

Ultra-Tite Couplingassembled hand tight (-U-ANWT)

Pack Joint Nut Grip Joint Nut Quick Joint NutUltra-Tite Connection

F 1 0 0 0 - 3 - G - NL

TYPE OF CORPORATION STOP F = Key/Plug Corporation Stop FB = Ford Ballcorp Corporation Stop FBRW = Ford Ballcorp Corporation Stop embossed with “Reclaimed Water”

Note: 1-1/4", 1-1/2" and 2" sizes are available only as Ford Ballcorp Corporations.

CORPORATION STOP SIZE BYINCREASED OUTLET CONNECTION SIZE

23 = 5/8"x3/4" 34 = 3/4"x1" 45 = 1"x1-1/4" 56 = 1-1/4"x1-1/2" 67 = 1-1/2"x2" 78 = 2"x2-1/2"

CORPORATION STOP SIZE

1 = 1/2" 2 = 5/8" 3 = 3/4" 4 = 1" 5 = 1-1/4" 6 = 1-1/2" 7 = 2"

OPTIONS G = Grip Joint (3/4"-2" CTS and 3/4" and 1" PEP) IDR7 = Pack Joint for 1-1/2" and 2" PEP requires dimension ratio designation Q = Quick Joint (for indicated items) TA = Tee-Head Adapter for 1-1/4", 1-1/2" and 2" ballcorp TW-Q = CTS Quick Joint Nut with Tracer Wire Terminal (contact factory for pricing) *U-ANWT = Ultra-Tite Coupling (requires a drilling/tapping machine adapter for MIP threads)* U2-ANWT = Ultra-Tite Coupling (requires a drilling/tapping machine adapter for flare copper threads) U-AWT = Consists of components assembled watertight to coupling or ell

Inlet Outlet AWWA MIP

200 300 Male Coupling Thread with Inside Driving Thread400 500 Male Iron Pipe600 700 Flare Copper800 900 Increased MIP with Inside Driving Thread1000 1100 Pack Joint for Copper or Plastic Tubing (CTS)1001 1101 Pack Joint for PE Pipe1002 1102 Pack Joint for PVC Pipe (schedule 40 and 80)1600 1700 Female Iron Pipe

INLET AND OUTLET CONNECTION TYPE

NO-LEAD

* Ultra-Tite couplings assembled to corporation stophand tight.

A-2

A

July, 2017Section A

INSERT STIFFENERS

** Weights for insert stiffeners are for standard package quantities.** INSERT-53-72(-Q) fits 1-1/4" plastic tubing (1.069 I.D.), 1" plastic pipe (1.049 I.D.) and 1" IPS HDPE (1.055 I.D.). © These inserts are specifically designed and required for Quick Joint fittings and are not interchangeable

with other compression fittings. These inserts are not suitable for any other application. Additionally, standard inserts are not compatible with this size and type of Quick Joint fitting.

50 SERIES FOR POLYETHYLENE TUBING

70 SERIES FOR POLYETHYLENE PIPE

Before using Ford Insert Stiffeners, be sure inside tubing or pipe dimensions correspond to the table below. Ford recommends using insert stiffeners when using plastic pipe or tubing.

CN

NS

PETI.D.

A .W . L .*

S .P . Q .

LP

INSERT-51 3/4" 0.681 4.8 200 $ 2.28INSERT-52 1" 0.875 4.2 100 2.42

** INSERT-53-72 1-1/4" 1.069 2.9 50 2.97©** INSERT-53-72-Q 1-1/4" 1.069 2.9 50 2.97

INSERT-54 1-1/2" 1.263 3.1 25 3.33© INSERT-54-Q 1-1/2" 1.263 2.6 30 3.33

INSERT-55 2" 1.653 6.0 40 3.33© INSERT-55-Q 2" 1.653 5.8 50 3.33

Inserts for OD Controlled DR11 High Density Polyethylene (HDPE)Pipe with PVC O.D.

CN

N S& P T DR HDPE OD N

I.D.S .

P . Q .L

P** INSERT-53-72 1" IPS 11 1.315 1.055 50 $ 2.97

INSERT-73-DR11 1-1/4" IPS 11 1.660 1.34 60 4.86INSERT-74-DR11 1-1/2" IPS 11 1.900 1.53 45 5.21INSERT-75-DR11 2" IPS 11 2.375 1.92 50 5.89

CN

NS

PEPI.D.

A .W . L .*

S .P . Q .

LP

INSERT-71 3/4" 0.824 4.4 100 $ 2.58 ** INSERT-53-72 1" 1.049 2.9 50 2.97

©** INSERT-53-72-Q 1" 1.049 2.9 50 2.97INSERT-73 1-1/4" 1.380 5.8 75 4.42INSERT-74 1-1/2" 1.610 5.5 45 4.86INSERT-75 2" 2.067 9.7 50 5.32

Ford Insert Stiffeners are solid 304 tubular stainless steel, dimpled and flanged to retain placement within the service line.

Dimple

Flange

A-3

A

July, 2017Section A

Recommended Tapping Machine Adapters

DRILLING MACHINE ADAPTERS

Recommended Drilling Machine Adapters

WARNING: Some tapping machine adapters furnished by the tapping machine manufacturers are not threaded all the way to the bottom of the adapter. This can cause problems when installing Ford Pack Joint and Grip Joint style Corporation Stops. If your adapter is NOT threaded to the bottom, a free washer-type screw plug adapter is available from Ford.

Table of Recommended Drill Sizesfor Installation of Corporation Stops in Service Clamps

or Saddles with a Drilling MachineC S S 1/2" 5/8" 5/8" x 3/4" 3/4" 3/4" x 1" 1" 1-1/4" 1-1/2" 2"Maximum Drill Size for Stop with AWWA Thread Inlet 7/16" 9/16" 9/16" 11/16" 11/16" 15/16" 1-3/16" 1-7/16" 1-7/8"

Maximum Drill Size for Stop with Iron Pipe Thread Inlet 7/16" - - 11/16" 11/16" 7/8" 1-3/16" 1-7/16" 1-7/8"

S F C N OT

M R RB-100 & B-101 B A-2 & A-3 TM100 MLT3401

5/8" x 3/4" F10003/4" Fl. Copper 680600 680600 680600 98423 92182

3/4" F (or FB) 1000, 11003/4" F (or FB) 1001, 1101, 1002, 1102

1" Fl. Copper 680601 680601 680601 98424 921873/4" x 1" F (or FB) 1000, 11001" F (or FB) 1000, 1100

3/4" x 1" F1001, 1101, 1002, 1102

1-1/4" Fl. Copper 680602 - 680602 - -1" F (or FB) 1001, 1101, 1002, 1102

1" x 1-1/4" F (or FB) 1000, 1100

1-1/4"FB1000, 1100FB1001, 1101, 1002, 1102

1-1/2" Fl. Copper - - 88640 - -1-1/4" x 1-1/2" FB1000, 1100

1-1/2"FB1000, 1100, 1002, 1102FB1001, 1101

2" Fl. Copper - - 88641 - -1-1/2" x 2" FB1000, 1100

2"FB1000, 1100FB1001, 1101, 1002, 1102

S A3/4" F (or FB) 1001-3-Q, 1101-3-Q

Special Thread

680688 - - 98423 -1" F (or FB) 1001-4-Q, 1101-4-Q 680689 - 680689 98424 -

1-1/2" FB1000-6-Q, 1100-6-Q - - 680421 - -2" FB1000-7-Q, 1100-7-Q - - 680422 - -

S F C N OT

M R R R FE-4 & E-5 D-4 & D-5 T T MLT3401 DM1100 M 77 S

1/2" F1000 1/2" Fl. Copper 63796 - - - - DMA2-1-NL -5/8" x 3/4" F1000 3/4" Fl. Copper 52019 37902 351-05-506 92097 08423 DMA2-3-NL SIMDMA2-33/4" F (or FB) 1000, 1100

3/4" F (or FB) 1001, 1101, 1002, 11021" Fl. Copper 36750 37903 351-05-508 92102 08424 DMA2-4-NL SIMDMA2-43/4" x 1" F (or FB) 1000, 1100

1" F (or FB) 1000, 11003/4" x 1" F1001, 1101, 1002, 1102

1-1/4" Fl. Copper 45385 37904 351-05-510 92107 - DMA2-5-NL SIMDMA2-51" F (or FB) 1001, 1101, 1002, 1102

1" x 1-1/4" F (or FB) 1000, 1100

1-1/4" FB1000, 1100FB1001, 1101, 1002, 1102

1-1/2" Fl. Copper 501947 37905 351-05-512 92112 08425 DMA2-6-NL SIMDMA2-61-1/4" x 1-1/2" FB1000, 1100

1-1/2" FB1000, 1100, 1002, 1102FB1001, 1101

2" Fl. Copper 508201 37906 351-05-516 92117 08426 DMA2-7-NL **See Note1-1/2" x 2" FB1000, 1100

2" FB1000, 1100FB1001, 1101, 1002, 1102

S A3/4" F (or FB) 1001-3-Q, 1101-3-Q

Special Thread

508919 508917 - - 08423 DMA6-3-Q-NL SIMDMA6-3-Q1" F (or FB) 1001-4-Q, 1101-4-Q 508920 508918 - - 08424 DMA6-4-Q-NL SIMDMA6-4-Q

1-1/4" FB1000-5-Q, 1100-5-Q - - - - - *DMA4-5F-Q-SS-NL SIMDMA4-5-Q1-1/2" FB1000-6-Q, 1100-6-Q 501949 507644 351-05-712 92157 08431 DMA4-6-Q-NL SIMDMA4-6-Q

2" FB1000-7-Q, 1100-7-Q 508199 507645 351-05-716 92162 08432 DMA4-7-Q-NL SIMDMA4-7-Q* Requires DMBB-67-SS-NL Boring Bar.

** Use the SIMTAP™ drilling machine body without an adapter.

A-4

A

July, 2017Section A

CN

D B OT

A .W . L .

S . P .Q .

LPV S I S O S

© F1000-1-NL 1/2" 1/2" 1/2" 1/2" Flare Copper 0.9 15 $ 44.09 © F1000-2-NL 5/8" 5/8" 5/8" 5/8" Flare Copper 1.4 10 50.35

F1000-23-NL 5/8" 5/8" 3/4" 3/4" Flare Copper 1.4 10 50.35►© F1000-3-NL 3/4" 3/4" 3/4" 3/4" Flare Copper 1.6 10 52.50

F1000-32-Q-NL 3/4" 3/4" 5/8" 5/8" Flare Copper 1.6 10 53.75►© F1000-34-NL 3/4" 3/4" 1" 1" Flare Copper 1.9 10 66.80►© F1000-4-NL 1" 1" 1" 1" Flare Copper 2.7 6 79.39

F1000-45-NL 1" 1" 1-1/4" 1-1/4" Flare Copper 3.3 5 113.82

CN

D B OT

A .W . L .

S . P .Q .

LPV S I S O S

►© FB1000-3-NL 3/4" 3/4" 3/4" 3/4" Flare Copper 1.6 12 $ 77.66 ► FB1000-34-NL 3/4" 3/4" 1" 1" Flare Copper 1.8 12 95.38►© FB1000-4-NL 1" 1" 1" 1" Flare Copper 2.2 8 102.13

FB1000-45-NL 1" 1" 1-1/4" 1-1/4" Flare Copper 3.0 6 135.13* FB1000-45-Q-NL 1" 1" 1-1/4" 1-1/4" Special Thread 3.0 6 135.13

FB1000-5-NL 1-1/4" 1-1/4" 1-1/4" 1-1/4" Flare Copper 4.8 2 218.52* FB1000-5-Q-NL 1-1/4" 1-1/4" 1-1/4" 1-1/4" Special Thread 4.9 2 218.52

FB1000-56-NL 1-1/4" 1-1/4" 1-1/2" 1-1/2" Flare Copper 5.5 - 278.51FB1000-6-NL 1-1/2" 1-1/2" 1-1/2" 1-1/2" Flare Copper 6.2 1 228.88

* FB1000-6-Q-NL 1-1/2" 1-1/2" 1-1/2" 1-1/2" Special Thread 6.1 1 228.88FB1000-67-NL 1-1/2" 1-1/2" 2" 2" Flare Copper 8.5 1 278.51FB1000-7-NL 2" 2" 2" 2" Flare Copper 11.4 1 378.56

* FB1000-7-Q-NL 2" 2" 2" 2" Special Thread 9.3 1 378.56FB1000-78-NL 2" 2" 2-1/2" 2-1/2" Flare Copper 11.6 1 399.83

FORD CORPORATION STOPSCORP STOPS WITH PACK JOINT OUTLET FOR COPPER OR PLASTIC TUBE (CTS)

F1000 - AWWA/CC TAPER THREAD INLET BY PACK JOINT OUTLET FOR COPPER OR PLASTIC TUBING (CTS)

F1100 - MALE IRON PIPE THREAD INLET BY PACK JOINT OUTLET FOR COPPER OR PLASTIC TUBING (CTS)

CN

D B OT

A .W . L .

S . P .Q .

LPV S I S O S

F1100-1-NL 1/2" 1/2" 1/2" 1/2" Flare Copper 0.9 18 $ 44.09►© F1100-3-NL 3/4" 3/4" 3/4" 3/4" Flare Copper 1.6 10 52.50► F1100-34-NL 3/4" 3/4" 1" 1" Flare Copper 1.8 10 66.80►© F1100-4-NL 1" 1" 1" 1" Flare Copper 3.3 6 79.39

FB1000 BALLCORP - AWWA/CC TAPER THREAD INLET BY PACK JOINT OUTLET FOR COPPER OR PLASTIC TUBING (CTS)

CN

D B OT

A .W . L .

S . P .Q .

LPV S I S O S

►© FB1100-3-NL 3/4" 3/4" 3/4" 3/4" Flare Copper 1.6 12 $ 77.66► FB1100-34-NL 3/4" 3/4" 1" 1" Flare Copper 1.8 12 95.38►© FB1100-4-NL 1" 1" 1" 1" Flare Copper 2.2 8 102.13

FB1100-45-NL 1" 1" 1-1/4" 1-1/4" Flare Copper 3.3 6 135.13FB1100-5-NL 1-1/4" 1-1/4" 1-1/4" 1-1/4" Flare Copper 4.8 2 218.52

* FB1100-5-Q-NL 1-1/4" 1-1/4" 1-1/4" 1-1/4" Special Thread 4.6 2 218.52FB1100-56-NL 1-1/4" 1-1/4" 1-1/2" 1-1/2" Flare Copper 5.5 1 278.51FB1100-6-NL 1-1/2" 1-1/2" 1-1/2" 1-1/2" Flare Copper 6.1 1 228.88

* FB1100-6-Q-NL 1-1/2" 1-1/2" 1-1/2" 1-1/2" Special Thread 5.9 1 228.88FB1100-67-NL 1-1/2" 1-1/2" 2" 2" Flare Copper 8.3 1 278.51FB1100-7-NL 2" 2" 2" 2" Flare Copper 10.6 1 378.56

* FB1100-7-Q-NL 2" 2" 2" 2" Special Thread 8.9 1 378.56FB1100-78-NL 2" 2" 2-1/2" 2-1/2" Flare Copper 10.7 1 399.83

FB1100 BALLCORP - MALE IRON PIPE THREAD INLET BY PACK JOINT OUTLET FOR COPPER OR PLASTIC TUBING (CTS)

© Quick Joint is available. Add “-Q” to the end of the catalog number.* 1-1/4", 1-1/2" and 2" Quick Joint Ballcorp corporation stop outlet threads require a special threaded drilling machine adapter.

See page A-3 for drilling machine adapters.► Ultra-Tite compression is available. Insert “U-ANWT” (MIP outlet threads), U2-ANWT (flare copper outlet threads) into the

catalog number. (Consists of corporation stop and Ultra-Tite coupling assembled hand tight.) Consult factory for pricing and availability. Example: FB1100-4-U-ANWT-NL

Grip Joint for 3/4" - 2" CTS can be ordered by adding “-G” to the catalog number. For reclaimed water (Ballcorp style only), insert "RW" into the catalog number. Example: FBRW1000-3-NL Add to price. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.61 NOTE: Ford recommends using insert stiffeners when using plastic pipe or tubing. Insert stiffeners are listed on page 2 of this section.

A-5

A

July, 2017Section A

CN

D B OT

A .W . L .

S . P .Q .

LPV S I S O S

► FB1001-3-NL 3/4" 3/4" 3/4" 1" Flare Copper 2.1 12 $ 95.38* FB1001-3-Q-NL 3/4" 3/4" 3/4" 1" Special Thread 2.3 12 95.38

► FB1001-4-NL 1" 1" 1" 1-1/4" Flare Copper 3.3 6 116.77* FB1001-4-Q-NL 1" 1" 1" 1-1/4" Special Thread 3.4 8 116.77

FB1001-5-NL 1-1/4" 1-1/4" 1-1/4" 1-1/2" Flare Copper 5.5 2 257.44FB1001-6-IDR7-NL 1-1/2" 1-1/2" 1-1/2" 2" Flare Copper 8.5 1 278.51FB1001-7-IDR7-NL 2" 2" 2" 2" Flare Copper 11.6 1 399.83

FB1001 BALLCORP - AWWA/CC TAPER THREAD INLET BYPACK JOINT OUTLET FOR PE PIPE

Grip Joint for PEP (3/4" and 1") can be ordered by inserting “-G” into the catalog number. Example: FB1001-3-G-NL

CORP STOPS WITH PACK JOINT OUTLET FOR PE PIPE

F1001 - AWWA/CC TAPER THREAD INLET BYPACK JOINT OUTLET FOR PE PIPE

Grip Joint for PEP (3/4" and 1") can be ordered by inserting “-G” into the catalog number. Example: F1001-3-G-NL

F1101 - MALE IRON PIPE THREAD INLET BY PACK JOINT OUTLET FOR PE PIPE

CN

D B OT

A .W . L .

S . P .Q .

LPV S I S O S

► F1101-3-NL 3/4" 3/4" 3/4" 1" Flare Copper 1.8 10 $ 65.14* F1101-3-Q-NL 3/4" 3/4" 3/4" 1" Special Thread 2.1 10 65.14

► F1101-34-NL 3/4" 3/4" 1" 1-1/4" Flare Copper 2.4 4 86.73► F1101-4-NL 1" 1" 1" 1-1/4" Flare Copper 3.3 5 109.68

* F1101-4-Q-NL 1" 1" 1" 1-1/4" Special Thread 3.4 6 109.68Grip Joint for PEP (3/4" and 1") can be ordered by inserting “-G” into the catalog number. Example: F1101-3-G-NL

CN

D B OT

A .W . L .

S . P .Q .

LPV S I S O S

► FB1101-3-NL 3/4" 3/4" 3/4" 1" Flare Copper 1.9 12 $ 95.38* FB1101-3-Q-NL 3/4" 3/4" 3/4" 1" Special Thread 2.3 12 95.38

► FB1101-4-NL 1" 1" 1" 1-1/4" Flare Copper 3.3 8 116.77* FB1101-4-Q-NL 1" 1" 1" 1-1/4" Special Thread 3.4 8 116.77

FB1101-5-NL 1-1/4" 1-1/4" 1-1/4" 1-1/2" Flare Copper 5.5 2 257.44FB1101-6-IDR7-NL 1-1/2" 1-1/2" 1-1/2" 2" Flare Copper 8.3 1 278.51FB1101-7-IDR7-NL 2" 2" 2" 2" Flare Copper 10.7 1 399.83

FB1101 BALLCORP - MALE IRON PIPE THREAD INLET BY PACK JOINT OUTLET FOR PE PIPE

Grip Joint for PEP (3/4" and 1") can be ordered by inserting “-G” into the catalog number. Example: FB1101-3-G-NL * Body outlet threads for 3/4" and 1" PE pipe are special with Quick Joint option. See tables on page A-3 for drilling

machine adapters. ► Ultra-Tite compression is available. Insert “U-ANWT” (MIP outlet threads), U2-ANWT (flare copper outlet threads) into the catalog number. (Consists of corporation stop and Ultra-Tite coupling assembled hand tight.) Consult factory for

pricing and availability. Example: FB1101-4-U-ANWT-NL For reclaimed water (Ballcorp style only), insert "RW" into the catalog number. Example: FBRW1001-3-NL Add to price . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.61 NOTE: Ford recommends using insert stiffeners when using plastic pipe or tubing. Insert stiffeners are listed on page 2 of this section.

FORD

CN

D B OT

A .W . L .

S . P .Q .

LPV S I S O S

► F1001-3-NL 3/4" 3/4" 3/4" 1" Flare Copper 1.8 10 $ 65.14* F1001-3-Q-NL 3/4" 3/4" 3/4" 1" Special Thread 2.1 10 65.14

► F1001-34-NL 3/4" 3/4" 1" 1-1/4" Flare Copper 2.4 4 86.73► F1001-4-NL 1" 1" 1" 1-1/4" Flare Copper 3.3 5 109.68

* F1001-4-Q-NL 1" 1" 1" 1-1/4" Special Thread 3.4 4 109.68

A-6

A

July, 2017Section A

CORP STOPS WITH PACK JOINT OUTLET FOR PVC PIPE

F1002 - AWWA/CC TAPER THREAD INLET BY PACK JOINT OUTLET FOR PVC PIPE

CN

D B OT

A .W . L .

S . P .Q .

LPV S I S O S

F1002-3-NL 3/4" 3/4" 3/4" 1" Flare Copper 1.8 10 $ 65.14F1002-34-NL 3/4" 3/4" 1" 1-1/4" Flare Copper 2.4 4 86.73F1002-4-NL 1" 1" 1" 1-1/4" Flare Copper 3.3 5 109.68

F1102 - MALE IRON PIPE THREAD INLET BY PACK JOINT OUTLET FOR PVC PIPE

CN

D B OT

A .W . L .

S . P .Q .

LPV S I S O S

F1102-3-NL 3/4" 3/4" 3/4" 1" Flare Copper 1.8 10 $ 65.14F1102-34-NL 3/4" 3/4" 1" 1-1/4" Flare Copper 2.4 8 86.73F1102-4-NL 1" 1" 1" 1-1/4" Flare Copper 3.3 5 109.68

FB1002 BALLCORP - AWWA/CC TAPER THREAD INLET BY PACK JOINT OUTLET FOR PVC PIPE

CN

D B OT

A .W . L .

S . P .Q .

LPV S I S O S

FB1002-3-NL 3/4" 3/4" 3/4" 1" Flare Copper 2.1 12 $ 95.38FB1002-4-NL 1" 1" 1" 1-1/4" Flare Copper 3.3 6 116.77FB1002-5-NL 1-1/4" 1-1/4" 1-1/4" 1-1/2" Flare Copper 5.5 2 257.44FB1002-6-NL 1-1/2" 1-1/2" 1-1/2" 1-1/2" Flare Copper 6.9 1 278.51FB1002-7-NL 2" 2" 2" 2" Flare Copper 12.4 1 399.83

CN

D B OT

A .W . L .

S . P .Q .

LPV S I S O S

FB1102-3-NL 3/4" 3/4" 3/4" 1" Flare Copper 2.1 12 $ 95.38FB1102-4-NL 1" 1" 1" 1-1/4" Flare Copper 3.3 6 116.77FB1102-5-NL 1-1/4" 1-1/4" 1-1/4" 1-1/2" Flare Copper 5.5 2 257.44FB1102-6-NL 1-1/2" 1-1/2" 1-1/2" 1-1/2" Flare Copper 6.7 1 278.51FB1102-7-NL 2" 2" 2" 2" Flare Copper 11.6 1 399.83

FB1102 BALLCORP - MALE IRON PIPE THREAD INLET BY PACK JOINT OUTLET FOR PVC PIPE

FORD

FORD

For reclaimed water (Ballcorp style only), insert "RW" into the catalog number. Example: FBRW1102-3-NLAdd to price ................................................................................................................................................... $ 8.61

A-7

A

July, 2017Section A

CORPORATION STOPS WITH OUTLET FOR FLARE COPPER

CN

D A .W . L .

S . P .Q .

LPV S I S O S

F600-1-NL 1/2" 1/2" 1/2" 0.8 20 $ 38.32F600-2-NL 5/8" 5/8" 5/8" 1.3 12 43.37F600-23-NL 5/8" 5/8" 3/4" 1.4 14 46.76F600-3-NL 3/4" 3/4" 3/4" 1.6 10 48.82F600-34-NL 3/4" 3/4" 1" 1.9 5 60.56F600-4-NL 1" 1" 1" 2.8 6 74.60F600-45-NL 1" 1" 1-1/4" 3.2 6 103.18

F600 - AWWA/CC TAPER THREAD INLET BYFLARE COPPER OUTLET

F700 - MALE IRON PIPE THREAD INLET BY FLARE COPPER OUTLET

CN

D A .W . L .

S . P .Q .

LPV S I S O S

F700-1-NL 1/2" 1/2" 1/2" 0.8 - $ 38.32F700-3-NL 3/4" 3/4" 3/4" 1.6 10 48.82F700-34-NL 3/4" 3/4" 1" 1.9 8 60.56F700-4-NL 1" 1" 1" 2.8 6 74.60F700-45-NL 1" 1" 1-1/4" 3.2 - 103.18

FB600 BALLCORP - AWWA/CC TAPER THREAD INLET BYFLARE COPPER OUTLET

CN

D A .W . L .

S . P .Q .

LPV S I S O S

FB600-3-NL 3/4" 3/4" 3/4" 1.5 12 $ 75.34FB600-34-NL 3/4" 3/4" 1" 1.9 12 93.03FB600-4-NL 1" 1" 1" 2.3 8 96.72FB600-5-NL 1-1/4" 1-1/4" 1-1/4" 4.7 2 218.52FB600-56-NL 1-1/4" 1-1/4" 1-1/2" 5.1 - 228.88FB600-6-NL 1-1/2" 1-1/2" 1-1/2" 7.0 1 228.88FB600-67-NL 1-1/2" 1-1/2" 2" 9.1 1 317.36FB600-7-NL 2" 2" 2" 12.1 1 399.83

FB700 BALLCORP - MALE IRON PIPE THREAD INLET BY FLARE COPPER OUTLET

CN

D A .W . L .

S . P .Q .

LPV S I S O S

FB700-3-NL 3/4" 3/4" 3/4" 1.8 12 $ 75.34FB700-34-NL 3/4" 3/4" 1" 2.1 - 93.03FB700-4-NL 1" 1" 1" 2.3 8 96.72FB700-5-NL 1-1/4" 1-1/4" 1-1/4" 4.7 2 218.52FB700-56-NL 1-1/4" 1-1/4" 1-1/2" 5.5 - 228.88FB700-6-NL 1-1/2" 1-1/2" 1-1/2" 6.8 1 228.88FB700-67-NL 1-1/2" 1-1/2" 2" 7.9 1 317.36FB700-7-NL 2" 2" 2" 11.2 1 399.83

NOTE: Quarter and eighth bends for F600, F700, FB600 and FB700 corporation stops are priced separately on pages A-13 and A-14 of this price book.

For reclaimed water (Ballcorp style only), insert "RW" into the catalog number.Example: FBRW700-3-NLAdd to price . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.61

A-8

A

July, 2017Section A

CORP STOPS WITH INCREASED IRON PIPE THREAD OUTLET WITH INSIDE DRIVING THREAD

NOTE: Quarter and eighth bends to fit F800, FB800, F900 and FB900 corporation stops are priced separately on page A-15 of this price book.

For reclaimed water (Ballcorp style only), insert "RW" into the catalog number.Example: FBRW900-3-NLAdd to price . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 8.61

CN

D A . W . L .

S . P .Q .

LPV S I S O S

F900-1-NL 1/2" 1/2" 3/4" 0.6 20 $ 38.32F900-3-NL 3/4" 3/4" 1" 1.3 14 46.13F900-4-NL 1" 1" 1-1/4" 2.3 8 69.72

F900 - MALE IRON PIPE THREAD INLET BY INCREASED MIP THREAD OUTLET WITH INSIDE DRIVING THREAD

CN

D A .W . L .

S . P .Q .

LPV S I S O S

F800-1-NL 1/2" 1/2" 3/4" 0.6 20 $ 38.32F800-2-NL 5/8" 5/8" 3/4" 1.1 15 42.56F800-3-NL 3/4" 3/4" 1" 1.3 10 46.13F800-4-NL 1" 1" 1-1/4" 2.3 8 69.72

F800 - AWWA/CC TAPER THREAD INLET BY INCREASED MIP THREAD OUTLET WITH INSIDE DRIVING THREAD

FB800 BALLCORP - AWWA TAPER THREAD INLET BY INCREASED MIP THREAD OUTLET WITH INSIDE DRIVING THREAD

CN

D A .W . L .

S . P .Q .

LPV S I S O S

FB800-3-NL 3/4" 3/4" 1" 1.3 10 $ 75.17FB800-4-NL 1" 1" 1-1/4" 2.0 10 95.14FB800-5-NL 1-1/4" 1-1/4" 1-1/2" 3.9 2 206.32FB800-6-NL 1-1/2" 1-1/2" 2" 5.9 2 210.04FB800-7-NL 2" 2" 2-1/2" 9.6 1 358.20

FB900 BALLCORP - MALE IRON PIPE THREAD INLET BY INCREASED MIP THREAD OUTLET WITH INSIDE DRIVING THREAD

CN

D A .W . L .

S . P .Q .

LPV S I S O S

FB900-3-NL 3/4" 3/4" 1" 1.4 10 $ 75.17FB900-4-NL 1" 1" 1-1/4" 2.0 10 95.14FB900-5-NL 1-1/4" 1-1/4" 1-1/2" 3.9 1 206.32FB900-6-NL 1-1/2" 1-1/2" 2" 5.7 2 210.04FB900-7-NL 2" 2" 2-1/2" 7.3 1 358.20

A-9

A

July, 2017Section A

CORP STOPS WITH MALE IRON PIPE OUTLET

CN

D A .W . L .

S . P .Q .

LPV S I S O S

F400-1-NL 1/2" 1/2" 1/2" 0.6 20 $ 36.18F400-13-NL 1/2" 1/2" 3/4" 0.6 20 36.18F400-3-NL 3/4" 3/4" 3/4" 1.3 14 46.13F400-34-NL 3/4" 3/4" 1" 1.3 14 46.13F400-4-NL 1" 1" 1" 2.3 8 69.72

F400 - AWWA/CC TAPER THREAD INLET BYMALE IRON PIPE THREAD OUTLET

CN

D A .W . L .

S . P .Q .

LPV S I S O S

F500-1-NL 1/2" 1/2" 1/2" 0.6 20 $ 36.18F500-13-NL 1/2" 1/2" 3/4" 0.6 - 36.18F500-3-NL 3/4" 3/4" 3/4" 1.3 10 46.13F500-4-NL 1" 1" 1" 2.2 8 69.72

F500 - MALE IRON PIPE THREAD BOTH ENDS

FB400 BALLCORP - AWWA/CC TAPER THREAD INLET BYMALE IRON PIPE THREAD OUTLET

CN

D A .W . L .

S . P .Q .

LPV S I S O S

FB400-3-NL 3/4" 3/4" 3/4" 1.2 10 $ 66.95FB400-34-NL 3/4" 3/4" 1" 1.5 10 83.96FB400-4-NL 1" 1" 1" 1.7 10 88.81FB400-45-NL 1" 1" 1-1/4" 2.3 - 104.56FB400-5-NL 1-1/4" 1-1/4" 1-1/4" 3.9 2 199.87FB400-6-NL 1-1/2" 1-1/2" 1-1/2" 5.4 2 210.04FB400-67-NL 1-1/2" 1-1/2" 2" 5.7 2 231.12FB400-7-NL 2" 2" 2" 8.6 1 358.20FB400-78-NL 2" 2" 2-1/2" 9.3 1 394.05

FB500 BALLCORP - MALE IRON PIPE THREAD BOTH ENDS CN

D A .W . L .

S . P .Q .

LPV S I S O S

FB500-3-NL 3/4" 3/4" 3/4" 1.2 14 $ 66.95FB500-4-NL 1" 1" 1" 1.7 10 88.81FB500-5-NL 1-1/4" 1-1/4" 1-1/4" 3.9 2 199.87FB500-6-NL 1-1/2" 1-1/2" 1-1/2" 5.3 2 210.04FB500-7-NL 2" 2" 2" 7.8 1 358.20

For reclaimed water (Ballcorp style only), insert "RW" into the catalog numberExample: FBRW500-3-NL

Add to price ....................................................................................................................$ 8.61

A-10

A

July, 2017Section A

CORP STOPS WITH FEMALE IRON PIPE OUTLET

CN

D A .W . L .

S . P .Q .

LPV S I S O S

F1600-3-NL 3/4" 3/4" 3/4" 1.3 15 $ 53.79F1600-4-NL 1" 1" 1" 2.3 8 78.20

F1600 - AWWA/CC TAPER THREAD INLET BYFEMALE IRON PIPE THREAD OUTLET

CN

D A .W . L .

S . P .Q .

LPV S I S O S

FB1600-3-NL 3/4" 3/4" 3/4" 1.4 18 $ 63.78FB1600-34-NL 3/4" 3/4" 1" 1.3 - 79.75FB1600-4-NL 1" 1" 1" 1.8 12 86.01FB1600-45-NL 1" 1" 1-1/4" 2.5 - 114.42FB1600-5-NL 1-1/4" 1-1/4" 1-1/4" 3.7 4 208.41FB1600-56-NL 1-1/4" 1-1/4" 1-1/2" 4.0 - 221.44FB1600-6-NL 1-1/2" 1-1/2" 1-1/2" 5.2 3 221.44FB1600-67-NL 1-1/2" 1-1/2" 2" 5.6 4 255.51FB1600-7-NL 2" 2" 2" 8.3 2 358.21FB1600-78-NL 2" 2" 2-1/2" 8.7 1 394.05

FB1600 BALLCORP - AWWA/CC TAPER THREAD INLET BY FEMALE IRON PIPE THREAD OUTLET

CN

D A .W . L .

S . P .Q .

LPV S I S O S

FB1700-3-NL 3/4" 3/4" 3/4" 1.1 18 $ 63.78FB1700-34-NL 3/4" 3/4" 1" 1.2 18 79.75FB1700-4-NL 1" 1" 1" 1.8 12 86.01FB1700-45-NL 1" 1" 1-1/4" 2.5 - 114.42FB1700-5-NL 1-1/4" 1-1/4" 1-1/4" 3.7 4 208.41FB1700-56-NL 1-1/4" 1-1/4" 1-1/2" 3.9 - 221.44FB1700-6-NL 1-1/2" 1-1/2" 1-1/2" 5.1 3 221.44FB1700-67-NL 1-1/2" 1-1/2" 2" 5.5 - 255.51FB1700-7-NL 2" 2" 2" 7.5 2 358.21FB1700-78-NL 2" 2" 2-1/2" 7.8 - 394.05

FB1700 BALLCORP - MALE IRON PIPE THREAD INLET BY FEMALE IRON PIPE THREAD OUTLET

CN

D A .W . L .

S . P .Q .

LPV S I S O S

F1700-1-NL 1/2" 1/2" 1/2" 0.6 - $ 38.32F1700-3-NL 3/4" 3/4" 3/4" 1.3 15 53.79F1700-4-NL 1" 1" 1" 2.3 8 78.20

F1700 - MALE IRON PIPE THREAD INLET BY FEMALE IRON PIPE THREAD OUTLET

For reclaimed water (Ballcorp style only), insert "RW" into the catalog number.Example: FBRW1700-3-NL

Add to price ......................................................................................................................... $ 8.61

A-11

A

July, 2017Section A

TEE HEAD ADAPTERS FOR BALLCORP

PITORIFICE KEY CORP STOPSFor tapping mains in extremely cold climates

The above are for direct main taps. Longer lengths for use with saddles are available. TO ORDER: For Pitorifice option add “-P" to the corporation stop catalog number and add appropriate price. Example: F600-3-P-NL

C SS

A L P

3/4" $ 25.281" 44.35

CN

D A .W . L .

S . P .Q .

LPV S I S O S

F200-3-NL 3/4" 3/4" 3/4" 1.3 14 $ 46.13F200-4-NL 1" 1" 1" 2.3 8 68.48

CN

D A .W . L .

S . P .Q .

LPV S I S O S

F300-3-NL 3/4" 3/4" 3/4" 1.3 10 $ 46.13F300-4-NL 1" 1" 1" 2.3 10 68.48

CORP STOPS WITH MALE COUPLING THREAD OUTLET

F200 - AWWA/CC TAPER THREAD INLET BYMALE COUPLING THREAD OUTLET WITH INSIDE DRIVING THREAD

F300 - MALE IRON PIPE THREAD INLET BYMALE COUPLING THREAD OUTLET WITH INSIDE DRIVING THREAD

Couplings and ells for F200 and F300 corporation stops are located on page A-12 of this section.

For factory assembly, add “-TA" to the Ballcorp catalog number and add above price. Example: FB1000-7-TA-NL

CORP STOP WRENCH

C N D A .

W . L . L A L P

RCORP Adjustable Smooth Jaw Wrench Fits up to 2" 4.4 18" $ 162.92

CN D A .

W . L .L

P

TAB-567 Tee-Head Adapter for 1-1/4", 1-1/2" & 2" Ballcorps(new valve design) 0.3 $ 17.00

TAB-6-OS Tee-Head Adapter for 1-1/4" & 1-1/2" Ballcorps (old valve design) 0.3 19.57TAB-7-OS Tee-Head Adapter for 2" Ballcorps (old valve design) 0.3 17.00

TEE HEAD ADAPTERS FOR 1-1/4", 1-1/2" & 2" BALLCORPS

Old Design

New Design

Tee-HeadAdapter

A-12

A

July, 2017Section A

CN

D A .W . L .

S . P .Q .

LPI S O S C S

QUARTER BENDSL102-23-NL 5/8" 3/4" 5/8" 0.9 15 $ 33.52L102-33-NL 3/4" 3/4" 3/4" 0.9 15 32.12

* L102-33S-NL 3/4" 3/4" 3/4" 1.1 14 38.32L102-44-NL 1" 1" 1" 1.7 8 53.76

* L102-44S-NL 1" 1" 1" 1.5 12 52.33EIGHTH BENDS

LA102-23-NL 5/8" 3/4" 5/8" 0.8 18 31.42LA102-33-NL 3/4" 3/4" 3/4" 0.8 18 29.78

* LA102-33S-NL 3/4" 3/4" 3/4" 1.0 18 44.33LA102-44-NL 1" 1" 1" 1.4 10 55.90

* LA102-44S-NL 1" 1" 1" 1.4 10 60.10STRAIGHT COUPLINGS

C102-13-NL 1/2" 3/4" 1/2" 0.6 25 25.95C102-23-NL 5/8" 3/4" 5/8" 0.7 25 29.74C102-33-NL 3/4" 3/4" 3/4" 0.7 25 28.04C102-34-NL 3/4" 1" 3/4" 1.0 18 38.69C102-44-NL 1" 1" 1" 1.3 10 47.85

QUARTER BENDS, EIGHTH BENDS, AND STRAIGHT COUPLINGS FORF200 AND F300 CORPORATION STOPS (gaskets are included)

FEMALE COUPLING THREAD INLET BY FLARED COPPER OUTLET

* “S” in catalog number indicates swivel nut on inlet.FEMALE COUPLING THREAD INLET BY PACK JOINT OUTLET FOR COPPER OR PLASTIC TUBING (CTS)

GASKETS FOR F200 AND F300 CORPORATION STOP ADAPTERS

CN

D A .W . L .

S . P .Q .

LPI S O S C S

QUARTER BENDS► L104-23-NL 5/8" 3/4" 5/8" 0.9 14 $ 38.32► L104-33-NL 3/4" 3/4" 3/4" 0.9 12 37.12►* L104-33S-NL 3/4" 3/4" 3/4" 1.1 12 36.95

* L104-33S-Q-NL 3/4" 3/4' 3/4" 1.2 12 36.95► L104-44-NL 1" 1" 1" 1.5 - 58.61►* L104-44S-NL 1" 1" 1" 1.4 8 53.24

EIGHTH BENDS► LA104-23-NL 5/8" 3/4" 5/8" 0.8 18 34.29

* LA104-23S-NL 5/8" 3/4" 5/8" 0.9 15 50.58* LA104-23S-Q-NL 5/8" 3/4" 5/8" 1.0 15 58.17

► LA104-33-NL 3/4" 3/4" 3/4" 0.8 18 32.50►* LA104-33S-NL 3/4" 3/4" 3/4" 1.0 15 36.95► LA104-44-NL 1" 1" 1" 1.3 8 55.12►* LA104-44S-NL 1" 1" 1" 1.3 10 53.23

STRAIGHT COUPLINGS ► C104-13-NL 1/2" 3/4" 1/2" 0.6 20 30.61► C104-23-NL 5/8" 3/4" 5/8" 0.7 20 31.24

C104-23-Q-NL 5/8" 3/4" 5/8" 0.7 20 33.73► C104-33-NL 3/4" 3/4" 3/4" 0.7 18 30.67

C104-33-Q-NL 3/4" 3/4" 3/4" 0.7 24 33.15C104-34-Q-NL 3/4" 1" 3/4" 0.9 15 41.67

► C104-44-NL 1" 1" 1" 1.1 12 41.85C104-44-Q-NL 1" 1" 1" 1.2 12 45.18

CN

G M(A A )

AI S

A .W . L .

LP

GT-195 Composition 5/8" - $ 1.21 ea.GT-113 Leather (for swivel units only) 3/4" - 0.73 ea.GT-116 Composition 3/4" - 1.34 ea.GT-164 Leather 1" - 0.90 ea.

* “S” in catalog number indicates swivel nut on inlet. Grip Joint for CTS can be ordered by adding “-G” to the catalog number. ► Ultra-Tite compression is available, insert “U-AWT” into the catalog number (consists of components

assembled watertight). For applications that require the Ultra-Tite to be hand tight only, insert “-U-ANWT” into the catalog number. Consult factory for pricing and availability. Example: C104-23-U-AWT-NL

FEMALE COUPLING THREAD SWIVEL BY MALE IRON PIPE THREADCN

D A .W . L .

S . P .Q .

LPI S O S C S

QUARTER BENDS* L108-33S-NL 3/4" 3/4" 3/4" 0.7 16 $ 44.14* L108-44S-NL 1" 1" 1" 1.1 10 47.87

* “S” in catalog number indicates swivel nut on inlet. NOTE: Ford recommends using insert stiffeners when using plastic pipe or tubing except for Utra-Tite compression fittings.

A-13

A

July, 2017Section A

SWIVEL EIGHTH BENDSCN

D A .W . L .

S . P .Q .

LPI S O S

FEMALE COPPER THREAD SWIVEL NUT BY FLARE COPPERLA02-33S-NL 3/4" 3/4" 1.0 18 $ 38.28LA02-44S-NL 1" 1" 1.5 10 52.23LA02-66S-NL 1-1/2" 1-1/2" 4.3 2 236.54LA02-77S-NL 2" 2" 7.7 1 334.84

FEMALE COPPER THREAD SWIVEL NUT BY P. J. FOR COPPER OR PLASTIC TUBING (CTS)► LA04-33S-NL 3/4" 3/4" 0.9 15 43.22

LA04-33S-Q-NL 3/4" 3/4" 0.9 15 43.22► LA04-44S-NL 1" 1" 1.2 10 61.43

LA04-66S-NL 1-1/2" 1-1/2" 4.0 2 215.26LA04-77S-NL 2" 2" 6.4 1 304.70

EIGHTH BENDS FOR F600, F700, AND BALLCORP FB600 AND FB700 (copper gaskets are included)

EIGHTH BENDSCN

D A .W . L .

S . P .Q .

LPI S O S

FEMALE COPPER THREAD BY FLARE COPPERLA02-33-NL 3/4" 3/4" 0.7 18 $ 29.82LA02-44-NL 1" 1" 1.3 10 43.91LA02-66-NL 1-1/2" 1-1/2" 3.4 2 139.05LA02-77-NL 2" 2" 6.4 3 256.84

FEMALE COPPER THREAD BY P. J. FOR COPPER OR PLASTIC TUBING (CTS)► LA04-33-NL 3/4" 3/4" 0.7 18 31.62► LA04-44-NL 1" 1" 1.1 10 51.17

LA04-66-NL 1-1/2" 1-1/2" 2.5 4 126.59LA04-77-NL 2" 2" 4.3 2 193.89

FEMALE COPPER THREAD BY PACK JOINT FOR PE PIPE► LA06-33-NL 3/4" 3/4" 0.8 15 40.97► LA06-44-NL 1" 1" 1.6 5 71.94

Grip Joint for CTS or PEP (3/4" and 1") can be ordered by inserting “-G” into the catalog number. Example: LA04-33-G-NL

EIGHTH BENDS WITH INLET FEMALE IRON PIPE THREAD ANDOUTLET MALE IRON PIPE THREAD

TO FIT F400 AND F500 CORPORATION STOPS OR FB400 AND FB500 BALLCORP CORPORATION STOPS

CN

D A .W . L .

S . P .Q .

LP I S O S

EIGHTH BENDSLA81-44-NL 1" 1" 1.0 15 $ 44.73

CN

D A .W . L .

S . P .Q .

LPI S O S

QUARTER BENDSL21-33-NL 3/4" 3/4" 0.9 16 $ 25.68L21-44-NL 1" 1" 1.9 8 42.33L21-66-NL 1-1/2" 1-1/2" 3.7 4 136.77L21-77-NL 2" 2" 6.3 1 227.93

EIGHTH BENDSLA21-33-NL 3/4" 3/4" 0.8 18 29.39LA21-44-NL 1" 1" 1.4 10 49.07

QUARTER AND EIGHTH BENDS WITH INLET FEMALE IRON PIPE THREAD AND OUTLET FLARE COPPER CONNECTIONS

TO FIT F400 AND F500 CORPORATION STOPS OR FB400 AND FB500 BALLCORP CORPORATION STOPS

Grip Joint for CTS can be ordered by adding “-G” to the catalog number. Example: LA04-33S-G-NL► Ultra-Tite compression is available, insert “U-AWT” into the catalog number (consists of components

assembled watertight). For applications that require the Ultra-Tite to be hand tight only, insert “-U-ANWT” into the catalog number. Consult factory for pricing and availability. Example: LA04-33S-U-AWT-NL

A-14

A

July, 2017Section A

QUARTER BENDSCN

D A .W . L .

S . P .Q .

LPI S O S

FEMALE COPPER THREAD BY FLARE COPPERL02-33-NL 3/4" 3/4" 0.9 15 $ 31.82L02-44-NL 1" 1" 1.6 8 50.69L02-66-NL 1-1/2" 1-1/2" 3.5 2 160.60L02-77-NL 2" 2" 7.0 1 300.65

FEMALE COPPER THREAD BY P. J. FOR COPPER OR PLASTIC TUBING (CTS)► L04-33-NL 3/4" 3/4" 0.9 15 35.26

L04-33-Q-NL 3/4" 3/4" 0.9 15 39.48L04-34-NL 3/4" 1" 1.0 10 36.05

► L04-44-NL 1" 1" 1.4 8 53.46L04-66-NL 1-1/2" 1-1/2" 3.4 2 163.44L04-77-NL 2" 2" 6.5 2 274.12

FEMALE COPPER THREAD BY PACK JOINT FOR PE PIPE► L06-33-NL 3/4" 3/4" 0.9 12 37.60► L06-44-NL 1" 1" 1.8 6 65.71

Grip Joint for CTS (3/4"-2") or PEP (3/4" and 1") can be ordered by inserting “-G” into the catalog num-ber. Example: L04-33-G-NL

SWIVEL QUARTER BENDSCN

D A .W . L .

S . P .Q .

LPI S O S

FEMALE COPPER THREAD SWIVEL NUT BY FLARE COPPERL02-33S-NL 3/4" 3/4" 1.1 14 $ 42.47L02-44S-NL 1" 1" 1.6 8 59.96L02-66S-NL 1-1/2" 1-1/2" 4.6 2 175.55L02-77S-NL 2" 2" 8.0 1 307.59

FEMALE COPPER THREAD SWIVEL NUTBY PACK JOINT FOR COPPER OR PLASTIC TUBING (CTS)

►© L04-33S-NL 3/4" 3/4" 1.1 12 48.27►© L04-44S-NL 1" 1" 1.5 8 65.83►© L04-66S-NL 1-1/2" 1-1/2" 4.2 2 170.94►© L04-77S-NL 2" 2" 6.2 1 288.54

FEMALE COPPER THREAD SWIVEL NUT WITH INTEGRAL WASHERBY QUICK JOINT FOR COPPER OR PLASTIC TUBING (CTS)

L04-33SI-Q-NL 3/4" 3/4" 1.2 10 49.98L04-44SI-Q-NL 1" 1" 1.8 8 67.86

QUARTER BENDS FOR F600, F700, AND BALLCORP FB600 AND FB700 (copper gaskets are included)

CN

D A .W . L .

S . P .Q .

LP I S O S

FEMALE COPPER THREAD SWIVEL NUT WITH INTEGRAL WASHER BY QUICK JOINTFOR COPPER OR PLASTIC TUBING (CTS)

LA04-33SI-Q-NL 3/4" 3/4" 1.0 12 $ 51.47LA04-44SI-Q-NL 1" 1" 1.7 10 63.46

EIGHTH BENDS FOR F600, F700, AND BALLCORP FB600 AND FB700 (copper gaskets are included)

SWIVEL EIGHTH BENDS WITH INTEGRAL WASHER

Grip Joint for CTS (3/4"-2") can be ordered by inserting “-G” into the catalog number. Example: L04-44S-G-NL© Quick Joint is available. Add “-Q” to the end of the catalog number. ► Ultra-Tite compression is available, insert “U-AWT” into the catalog number (consists of components

assembled watertight). For applications that require the Ultra-Tite to be hand tight only, insert “-U-ANWT” into the catalog number. Consult factory for pricing and availability. Example: L04-33S-U-AWT-NL

NOTE: Ford recommends using insert stiffeners when using plastic pipe or tubing. Insert stiffeners are listed on page 2 of this section.

A-15

A

July, 2017Section A

QUARTER AND EIGHTH BENDS FOR F800 AND F900 CORPORATION STOPS OR

FB800 AND FB900 BALLCORP CORPORATION STOPSCN

D A .W . L .

S . P .Q .

LPFIP I S O S C S

QUARTER BENDS WITH FLARE COPPER OUTLETL12-43-NL 1" 3/4" 3/4" 1.0 14 $ 32.77L12-54-NL 1-1/4" 1" 1" 1.7 8 49.55

EIGHTH BENDS WITH FLARE COPPER OUTLETLA12-43-NL 1" 3/4" 3/4" 0.7 18 25.56LA12-54-NL 1-1/4" 1" 1" 1.3 10 43.53

EIGHTH BENDS WITH PACK JOINT FOR COPPER OR PLASTIC TUBING (CTS) OUTLET ► LA14-33-NL 3/4" 3/4" 3/4" 0.7 18 38.68► LA14-43-NL 1" 3/4" 3/4" 0.7 18 37.43► LA14-54-NL 1-1/4" 1" 1" 1.1 - 51.80

LA14-76-NL 2" 1-1/2" 1-1/2" 2.7 4 140.91LA14-87-NL 2-1/2" 2" 2" 5.3 2 225.04

COPPER TUBE NUTS FOR FLARE CONNECTIONS

THAW WIRE COPPER TUBE NUTS FOR FLARE COPPER CONNECTIONS

CN

DC S

A .W . L .

S . P .Q .

LP

CTN-1 1/2" 0.2 - $ 3.62CTN-2 5/8" 0.2 - 5.71CTN-3 3/4" 0.3 40 5.95CTN-4 1" 0.5 16 9.84CTN-5 1-1/4" 0.7 10 15.80CTN-6 1-1/2" 1.2 7 27.49CTN-7 2" 2.2 3 51.24

CN

DC S

A .W . L .

S . P .Q .

LP

CTN-3-THW 3/4" 0.4 35 $ 15.60CTN-4-THW 1" 0.7 15 19.49

These nuts have a lug attachment for connecting an electric thawing wire.

Grip Joint for CTS can be ordered by inserting “-G” into the catalog number. Example: LA14-43-G-NL ► Ultra-Tite compression is available, insert “U-AWT” into the catalog number (consists of components

assembled watertight). For applications that require the Ultra-Tite to be hand tight only, insert “-U-ANWT” into the catalog number. Consult factory for pricing and availability. Example: LA14-43-U-AWT-NL

NOTE: Ford recommends using insert stiffeners when using plastic pipe or tubing. Insert stiffeners are listed on page 2 of this section.

WEDDING RING(CONVERTS PACK JOINT SOCKET TO FLARE COPPER)

Wedding Ring

CN

S CA

A .W . L .

S . P .Q .

LP

WR-3-NL 3/4" 0.1 350 $ 4.63WR-4-NL 1" 0.1 250 5.36WR-5-NL 1-1/4" 0.1 100 6.68WR-6-NL 1-1/2" 0.2 85 8.52WR-7-NL 2" 0.3 40 16.29

A-16

A

July, 2017 / Revision December, 2017Section A

BRASS END CAPSTO CAP OFF A CORPORATION STOP OR COUPLING

SOLID COPPER DISCSTO PLUG SERVICE AT FLARE COPPER CONNECTIONS

CN

DC

S

A .W . L .

S . P .Q .

LP

DISC-2 5/8" .01 100 $ 2.71DISC-3 3/4" .04 100 2.24DISC-4 1" .06 100 2.95DISC-5 1-1/4" .07 25 4.39DISC-6 1-1/2" .09 25 7.29DISC-7 2" .18 25 8.09

COPPER GASKETS FOR FLARE COPPER CONNECTIONS(for adapters that replace copper flare nut)

Solid Copper Disc

Copper Gasket

RING ADAPTERS - PACK JOINT TO FLARE(converts CTS Pack Joint socket to flare copper nose)

For attaching either integral or swivel type female adapters, couplings and ells

CN

D A .W . L .

S . P .Q .

LPF PJ S S & T F N S

RA42-33-NL 3/4" CTS Pack Joint Corporation Stop and Coupling 3/4" 0.1 165 $ 4.96

RA42-44-NL 1" CTS Pack Joint Corporation Stop Only 1" 0.1 95 5.51

CN

DC

S

A .W . L .

S . P .Q .

LP

SLC-3 3/4" .01 100 $ 2.01SLC-4 1" .02 100 2.85SLC-5 1-1/4" .03 - 3.24SLC-6 1-1/2" .04 - 4.60SLC-7 2" .08 - 5.81

Quick Joint Ring Adapter

Pack Joint Ring Adapter

RING ADAPTERS - QUICK JOINT TO FLARE(converts CTS Quick Joint socket to flare copper nose)

For attaching integral (non-swivel) type female flare adapters, couplings and ells

CN

D A .W . L .

S . P .Q .

LPF QJ S S & T F N S

RA42-33-Q-NL 3/4" CTS Quick Joint Corporation Stop and Coupling 3/4" 0.1 120 $ 4.96

RA42-44-Q-NL 1" CTS Quick Joint Corporation Stop and Coupling 1" 0.1 100 5.51

CN

VS T C S /C A .

W . L .S . P .

Q .L

PCAP-24-3-NL 3/4" Flare Copper Corp & CTS Compression Corps 0.3 72 $ 38.46CAP-2-4-NL 1" Flare Copper Corp & CTS Compression Corps

- Also fi ts 3/4" PEP Corp & 3/4" PVC Corp 0.5 32 62.19CAP-4-4-NL 1" CTS Pack Joint Coupling & CTS Grip Joint Coupling 0.6 32 62.19CAP-2-5-NL 1-1/4" Flare Copper Corp & CTS Compression Corp (excluding Quick Joint)

- Also fi ts 1" PEP Corp & 1" PVC Corp 0.7 24 71.86CAP-4-5-Q-NL 1-1/4" CTS Quick Joint Corp 0.8 34 71.86CAP-4-5-NL 1-1/4" CTS Pack Joint Corp & CTS Grip Joint Coupling - Also fi ts 1" PEP Cplg 0.9 24 71.86CAP-2-6-NL 1-1/2" Flare Copper Corp, CTS Compression Corp (excluding Quick Joint) &

PVC Coupling 1.0 20 92.46CAP-4-6-Q-NL 1-1/2" CTS Quick Joint Corp 1.0 18 92.46CAP-2-7-NL 2" Flare Copper Corp, CTS Compression Corp (excluding Quick Joint) &

PVC Corp - Also fi ts 2-1/2" CTS Pack & Grip Coupling 1.6 9 121.71CAP-4-7-Q-NL 2" CTS Quick Joint Corp 1.7 12 121.71CAP-4-7-NL 2" CTS Pack Joint Coupling & CTS Grip Joint Coupling

- Also fi ts 1-1/2" PEP Pack Joint (IDR7) 2.5 12 121.71

A-17

A

July, 2017Section A

SCREW PLUG ADAPTERS AND WASHERS FOR SCREW PLUGFor inserting 3/4" and 1" - F1000, F1100, FB1000 and FB1100 corporation stops

CN D L

P© SP-3-NL Screw Plug Adapter for 3/4" CTS P.J./G.J. Corp Stop $ 48.70© SP-4-NL Screw Plug Adapter for 1" CTS P.J./G.J. Corp Stop 66.23© WSP-3-NL Washer for Screw Mueller Plug Adapter for 3/4" CTS P.J./G.J. Corp Stop 9.23© WSP-4-NL Washer for Screw Mueller Plug Adapter for 1" CTS P.J./G.J. Corp Stop 11.26

REPLACEMENT PIECE FOR CORPORATION STOPS

AWWA/CC TAPER THREAD INLET BY MALE IRON PIPE THREAD OUTLET - REPLACES F400 AND FB400

CN

D A .W . L .

S . P .Q .

LPI S O S

F40-1-NL 1/2" 1/2" 0.3 41 $ 14.38F40-3-NL 3/4" 3/4" 0.5 25 21.21F40-4-NL 1" 1" 0.6 18 27.87F40-6-NL 1-1/2" 1-1/2" 1.4 - 66.43F40-7-NL 2" 2" 2.5 4 112.45

AWWA/CC TAPER THREAD INLET BY PACK JOINT OUTLET FOR COPPER OR PLASTIC TUBING (CTS) - REPLACES F1000 AND FB1000

CN

D A .W . L .

S . P .Q .

LPI S O S

► F60-4-3-NL 3/4" 3/4" 0.7 20 $ 31.32► F60-4-4-NL 1" 1" 1.1 12 51.73

Grip Joint for CTS can be ordered by inserting “-G” into the catalog number. Example: F60-4-4-G-NL► Ultra-Tite compression is available, insert “-U-AWT” into the catalog number (consists of components

assembled watertight). For applications that require the Ultra-Tite to be hand tight only, insert “-U-ANWT” into the catalog number. Consult factory for pricing and availability. Example: F60-4-3-U-ANWT-NL

AWWA/CC TAPER THREAD INLET BY PACK JOINT FOR PE PIPE OUTLET - REPLACES F1001 AND FB1001CN

D A .W . L .

S . P .Q .

LPI S O S

► F60-6-3-AWT-NL 3/4" 3/4" 1.2 20 $ 56.87► F60-6-4-AWT-NL 1" 1" 1.3 10 72.18

Grip Joint for PEP (3/4" and 1") can be ordered by inserting “-G” into the catalog number. Example: F60-6-3-G-AWT-NL These products are manufactured from components assembled watertight. ► Ultra-Tite compression is available, insert “-U-AWT” into the catalog number (consists of components assembled watertight). For applications that require the Ultra-Tite to be hand tight only, insert “-U-ANWT” into the catalog number. Consult factory for pricing and availability. Example: F60-6-3-AWT-U-AWT-NL

SP-3-NL

WSP-3-NL

CN

D A .W . L .

S . P .Q .

LPI S O S

F60-1-NL 1/2" 1/2" 0.3 45 $ 18.65F60-3-NL 3/4" 3/4" 0.7 20 26.90F60-4-NL 1" 1" 1.2 10 49.66F60-6-NL 1-1/2" 1-1/2" 3.2 3 133.78F60-7-NL 2" 2" 5.4 2 254.32

AWWA/CC TAPER THREAD INLET BY FLARE COPPER OUTLET - REPLACES F600 AND FB600

© For washers and adapters used on quick joint applications, add “-Q” to the catalog number. Example: SP-3-Q-NL

A-18

A

July, 2017Section A

BRASS CORP STOP PLUGS

BRASS BUSHINGS FOR CORPORATION STOP INLETS

AWWA TAPER THREAD BY SQUARE WRENCH HEADCN

D A .W . L .

S . P .Q .

LPT S A

CSP-1-A-NL 1/2" Square Wrench Head 0.1 125 $ 20.29CSP-2-A-NL 5/8" Square Wrench Head 0.1 130 21.14CSP-3-A-NL 3/4" Square Wrench Head 0.2 60 12.34CSP-4-A-NL 1" Square Wrench Head 0.4 40 17.97CSP-6-A-NL 1-1/2" Square Wrench Head 0.7 20 48.65CSP-7-A-NL 2" Square Wrench Head 0.9 14 83.33

MALE IRON PIPE THREAD BY SQUARE WRENCH HEADCN

D A .W . L .

S . P .Q .

LPT S A

CSP-3-I-NL 3/4" Square Wrench Head 0.2 100 $ 11.59CSP-4-I-NL 1" Square Wrench Head 0.4 50 18.49CSP-6-I-NL 1-1/2" Square Wrench Head 0.4 - 42.67CSP-7-I-NL 2" Square Wrench Head 0.6 12 75.96

AWWA TAPER THREAD BY INTERNAL DRIVING THREADCN

D A .W . L .

S . P .Q .

LPT S A

CSP-3-IT-NL 3/4" Internal Driving Thread 0.3 48 $ 13.29CSP-4-IT-NL 1" Internal Driving Thread 0.7 - 26.56

CN

D A .W . L .

S . P .Q .

LPO T S T I T S T

BBAA-31-NL 3/4" Male AWWA Taper Thread 1/2" Female AWWA Taper Thread 0.3 50 $ 16.36BBAA-43-NL 1" Male AWWA Taper Thread 3/4" Female AWWA Taper Thread 0.4 36 20.23BBAA-53-NL 1-1/4" Male AWWA Taper Thread 3/4" Female AWWA Taper Thread 1.1 10 97.02BBAA-63-NL 1-1/2" Male AWWA Taper Thread 3/4" Female AWWA Taper Thread 1.2 10 54.57BBAA-64-NL 1-1/2" Male AWWA Taper Thread 1" Female AWWA Taper Thread 1.2 10 54.74BBAA-73-NL 2" Male AWWA Taper Thread 3/4" Female AWWA Taper Thread 2.2 8 87.37BBAA-74-NL 2" Male AWWA Taper Thread 1" Female AWWA Taper Thread 1.8 8 89.35BBAA-75-NL 2" Male AWWA Taper Thread 1-1/4" Female AWWA Taper Thread 1.8 8 77.63BBAA-76-NL 2" Male AWWA Taper Thread 1-1/2" Female AWWA Taper Thread 1.8 12 66.64BBAI-31-NL 3/4" Male AWWA Taper Thread 1/2" Female Iron Pipe Thread 0.3 50 15.49BBAI-43-NL 1" Male AWWA Taper Thread 3/4" Female Iron Pipe Thread 0.4 30 20.59BBAI-65-NL 1-1/2" Male AWWA Taper Thread 1-1/4" Female Iron Pipe Thread 1.2 10 47.96BBAI-75-NL 2" Male AWWA Taper Thread 1-1/4" Female Iron Pipe Thread 1.8 8 86.53BBAI-76-NL 2" Male AWWA Taper Thread 1-1/2" Female Iron Pipe Thread 1.8 8 76.63BBIA-43-NL 1" Male Iron Pipe Thread 3/4" Female AWWA Taper Thread 0.4 30 15.49BBIA-53-NL 1-1/4" Male Iron Pipe Thread 3/4" Female AWWA Taper Thread 0.4 30 21.20BBIA-54-NL 1-1/4" Male Iron Pipe Thread 1" Female AWWA Taper Thread 0.4 35 17.44BBIA-63-NL 1-1/2" Male Iron Pipe Thread 3/4" Female AWWA Taper Thread 0.9 5 52.61BBIA-64-NL 1-1/2" Male Iron Pipe Thread 1" Female AWWA Taper Thread 1.2 10 50.93BBIA-73-NL 2" Male Iron Pipe Thread 3/4" Female AWWA Taper Thread 0.7 16 67.29BBIA-74-NL 2" Male Iron Pipe Thread 1" Female AWWA Taper Thread 1.1 12 72.83BBIA-75-NL 2" Male Iron Pipe Thread 1-1/4" Female AWWA Taper Thread 1.1 14 56.11BBIA-76-NL 2" Male Iron Pipe Thread 1-1/2" Female AWWA Taper Thread 1.1 12 57.69

A-19

A

July, 2017Section A

FOR FLANGED LEAD CORPORATION STOPS(these connections replace flanged lead gooseneck connections)

Leather gaskets are included

CN

D A .“A" D .

A .W . L .

S . P .Q .

LPI S /T O S

UNION SWIVEL COUPLINGS* LFSC-2-NL 5/8" XS 3/4" 1-5/8" 0.5 36 $ 24.65* LFSC-3-NL 3/4" XS 3/4" 1-7/8" 0.7 30 34.04* LFSC-4-NL 1" XS 1" 2-1/8" 0.9 20 66.12

STRAIGHT COUPLINGSLFC1-13-NL 1/2" XS 3/4" 1-7/16" 0.6 20 37.00

FEMALE FLANGED LEAD THREAD INLET BY FEMALE IRON PIPE OUTLET

FEMALE FLANGED LEAD THREAD INLET BY FLARE COPPER OUTLET

“A” Dimension

CN

D A . “A” D .

A .W . L .

S . P .Q .

LPI S /T O S

STRAIGHT COUPLINGSLFC2-13-NL 1/2" XS 3/4" 1-7/16" 0.9 15 $ 45.44LFC2-23-NL 5/8" XS 3/4" 1-5/8" 0.9 15 50.53

* LFSC2-33-NL 3/4" XS 3/4" 1-7/8" 1.2 15 54.44LFC2-44-NL 1" XS 1" 2-1/8" 1.4 10 77.89

FEMALE FLANGED LEAD THREAD INLET BY PACK JOINTFOR COPPER OR PLASTIC TUBING (CTS) OUTLET

CN

D A . “A” D .

A . W . L .

S . P .Q .

LPI S /T O S

STRAIGHT COUPLINGS► LFC4-13-NL 1/2" XS 3/4" 1-7/16" 0.8 15 $ 52.24► LFC4-23-NL 5/8" XS 3/4" 1-5/8" 0.8 20 55.00 LFC4-23-AWT-Q-NL 5/8" XS 3/4" 1-5/8" 0.9 25 81.37►* LFSC4-33-NL 3/4" XS 3/4" 1-7/8" 1.1 12 58.87

FEMALE FLANGED LEAD THREAD INLET BY QUICK JOINTFOR COPPER OR PLASTIC TUBING (CTS) OUTLET

CN

D A . “A” D .

A . W . L .

S . P .Q .

LPI S /T O S

STRAIGHT COUPLINGSLFC4-34-Q-NL 3/4" XS 1" 1-7/8" 1.3 8 $ 64.18

* “S” in catalog number indicates swivel coupling. These products are manufactured from components assembled watertight.

► Ultra-Tite compression is available, insert “-U-AWT” into the catalog number (consists of components assembled watertight). For applications that require the Ultra-Tite to be hand tight only, insert “-U-ANWT” into the catalog number. Consult factory for pricing and availability. Example: LFC4-13-U-AWT-NL

NOTE: Ford recommends using insert stiffeners when using plastic pipe or tubing. Insert stiffeners arelisted on page 2 of this section.

A-20

A

July, 2017Section A

FEMALE COUPLING THREAD INLET BY FLARE COPPER OUTLETCN

D A .“A" D .

A .W . L .

S . P .Q .

LPI S O S C S

QUARTER BENDSL102-23-NL 5/8" 3/4" 5/8" 1-1/8" 0.9 15 $ 33.52L102-33-NL 3/4" 3/4" 3/4" 1-1/4" 0.9 15 32.12

* L102-33S-NL 3/4" 3/4" 3/4" 1-1/4" 1.1 14 38.32L102-44-NL 1" 1" 1" 1-1/2" 1.7 8 53.76

* L102-44S-NL 1" 1" 1" 1-1/2" 1.5 12 52.33EIGHTH BENDS

LA102-23-NL 5/8" 3/4" 5/8" 1-1/8" 0.8 18 31.42LA102-33-NL 3/4" 3/4" 3/4" 1-1/4" 0.8 18 29.78

* LA102-33S-NL 3/4" 3/4" 3/4" 1-1/4" 1.0 18 44.33LA102-44-NL 1" 1" 1" 1-1/2" 1.4 10 55.90

* LA102-44S-NL 1" 1" 1" 1-1/2" 1.4 10 60.10STRAIGHT COUPLINGS

C102-13-NL 1/2" 3/4" 1/2" 1" 0.6 25 25.95C102-23-NL 5/8" 3/4" 5/8" 1-1/8" 0.7 25 29.74C102-33-NL 3/4" 3/4" 3/4" 1-1/4" 0.7 25 28.04C102-34-NL 3/4" 1" 3/4" 1-1/4" 1.0 18 38.69C102-44-NL 1" 1" 1" 1-1/2" 1.3 10 47.85

FEMALE COUPLING THREAD BY MALE IRON PIPE THREADCN

D A .“A” D .

A .W . L .

S . P .Q .

LPI S O S C S

QUARTER BENDS* L108-33S-NL 3/4" 3/4" 3/4" 1-1/4" 0.7 16 $ 44.14* L108-44S-NL 1" 1" 1" 1-1/2" 1.0 10 47.87

STRAIGHT COUPLINGS C108-45-NL 1" 1-1/4" 1" 1-1/2" 0.8 - 59.96

“A” Dimension

FEMALE COUPLING THREAD INLET BY PACK JOINT FOR COPPER OR PLASTIC TUBING (CTS) OUTLET CN

D A .“A” D .

A .W . L .

S . P .Q .

LPI S O S C S

QUARTER BENDS► L104-23-NL 5/8" 3/4" 5/8" 1-1/8" 0.9 - $ 38.32► L104-33-NL 3/4" 3/4" 3/4" 1-1/4" 0.9 - 37.12► * L104-33S-NL 3/4" 3/4" 3/4" 1-1/4" 1.1 12 36.95►* L104-33S-Q-NL 3/4" 3/4" 3/4" 1-1/4" 1.1 12 36.95► L104-44-NL 1" 1" 1" 1-1/2" 1.5 - 58.61►* L104-44S-NL 1" 1" 1" 1-1/2" 1.4 8 53.24

EIGHTH BENDS► LA104-23-NL 5/8" 3/4" 5/8" 1-1/8" 0.8 18 34.29►* LA104-23S-NL 5/8" 3/4" 5/8" 1-1/8" 0.9 15 50.58►* LA104-23S-Q-NL 5/8" 3/4" 5/8" 1-1/8" 0.9 15 58.17► LA104-33-NL 3/4" 3/4" 3/4" 1-1/4" 0.8 18 32.50►* LA104-33S-NL 3/4" 3/4" 3/4" 1-1/4" 1.0 15 36.95►* LA104-33S-AWT-Q-NL 3/4" 3/4" 3/4" 1-1/4" 1.3 25 69.82►* LA104-34S-AWT-Q-NL 3/4" 1" 3/4" 1-1/4" 1.5 - 77.86► LA104-44-NL 1" 1" 1" 1-1/2" 1.3 8 55.12►* LA104-44S-NL 1" 1" 1" 1-1/2" 1.3 10 53.23►* LA104-44S-AWT-Q-NL 1" 1" 1" 1-1/2" 2.2 15 94.98

STRAIGHT COUPLINGS ► C104-13-NL 1/2" 3/4" 1/2" 1" 0.6 20 30.61► C104-23-NL 5/8" 3/4" 5/8" 1-1/8" 0.7 20 31.24

C104-23-Q-NL 5/8" 3/4" 3/4" 1-1/8" 0.7 20 33.73► C104-33-NL 3/4" 3/4" 3/4" 1-1/4" 0.7 18 30.67

C104-33-Q-NL 3/4" 3/4" 3/4" 1-1/4" 0.7 24 33.15C104-34-Q-NL 3/4" 1" 3/4" 1-1/2" 1.2 - 41.67

► C104-44-NL 1" 1" 1" 1-1/2" 1.1 12 41.85C104-44-Q-NL 1" 1" 1" 1-1/2" 1.1 12 45.18

Grip Joint for CTS can be ordered by adding “-G” to the catalog number.* “S” in catalog number indicates swivel inlet. These products are manufactured from components assembled watertight.

► Ultra-Tite compression is available, insert “-U-AWT” into the catalog number (consists of components assembled watertight). For applications that require the Ultra-Tite to be hand tight only, insert “-U-ANWT” into the catalog number. Consult factory for pricing and availability. Example: C104-44-U-AWT-NLNOTE: Ford recommends using insert stiffeners when using plastic pipe or tubing. Insert stiffeners are

listed on page 2 of this section.

FOR 1/2" THROUGH 1" WIPED LEAD JOINT CORPORATION STOPS(the couplings below also fit Ford F200 and F300 Corporation Stops)

Gaskets are included

A-21

A

July, 2017Section A

SERVICE INSULATOR CORPORATION STOPS

CN

D C LPC S V S I O

SI-F1700-3-AWT-NL Key 3/4" 3/4" MIP 3/4" FIP F500-3-NL/DB-34/C11-43-NL AWT $ 80.14SI-F1700-4-AWT-NL Key 1" 1" MIP 1" FIP F500-4-NL/DB-45/C11-45-NL AWT 111.96

*♦ SI-FB1000-3-AWT-NL Ball 3/4" 3/4" AWWA 3/4" Pack Joint (CTS) FB1600-34-NL/DB-34/C84-33-NL AWT 117.10*♦ SI-FB1000-6-AWT-NL Ball 1-1/2" 1-1/2" AWWA 1-1/2" Pack Joint (CTS) FB1600-67-NL/DB-67/C84-66-NL AWT 363.20*♦ SI-FB1000-7-AWT-NL Ball 2" 2" AWWA 2" Pack Joint (CTS) FB1600-78-NL/DB-78/C84-77-NL AWT 546.70*♦ SI-FB1100-7-AWT-NL Ball 2" 2" MIP 2" Pack Joint (CTS) FB1700-78-NL/DB-78/C84-77-NL AWT 546.70

SI-FB600-3-AWT-NL Ball 3/4" 3/4" AWWA 3/4" Flare FB400-3-NL/DB-34/C21-34-NL AWT 107.87SI-FB600-4-AWT-NL Ball 1" 1" AWWA 1" Flare FB400-4-NL/DB-45/C21-45-NL AWT 152.61

Dielectric (Insulating) Bushing Coupling

Corporation Stop

CN D A .

W . L .S . P .

Q .L

PSI-3-NL 3/4" 0.9 20 $ 52.06SI-4-NL 1" 1.3 10 76.44SI-6-NL 1-1/2" 3.8 3 171.71SI-7-NL 2" 6.7 2 298.62

SERVICE INSULATORS

NOTE: Various service line connection types are available upon request.

Threaded nylon bushing assembled between two flare copper adapters.

Female Flare Copper Male Flare Copper

Service Insulator

Contact factory for other service insulator corporation stops not listed. Note: These products are manufactured from components assembled watertight.

* Grip Joint for CTS can be ordered by adding “-G” to the catalog number. Example SI-FB1000-3-AWT-G-NL♦ Quick Joint is available. Add “-Q” to the catalog number. Example SI-FB1000-3-AWT-Q-NL