PRICE BID - TSECL Bid... · 2 Earth work in excavation in foundation trenches ... fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required

Deputy General Manager Signature of contractor with full name. Central Civil Division 79-Tilla, Agartala

1

Tripura State Electricity Corporation Limited(A Government of Tripura Enterprise)

Office of the Deputy General ManagerCentral Civil Division

79-Tilla, Agartala.

PRICE BID

Name of work: - Construction of two storied Sub-station cum office building with provision of

vertical expansion in future at Pragati Road, Agartala. (Re-call)

D.N.I.T. No.: - DNIT / DGM / CCD / 2015-2016 / 08 Date: - 07-10-2015.

Estimated cost: - Rs.1,81,18,376.00 (Rupees One Crore Eighty One Lakh Eighteen ThousandThree Hundred and Seventy Six) only.

Earnest money: - Rs.3,62,368.00 (Rupees Three Lakh Sixty Two Thousand Three Hundred andSixty Eight) only.

Completion Period: - 360 (Three hundred & sixty) days.

[This bid document (Price Bid) contain 26 (Twenty-six) pages including cover pages].


2

- B L A N K -


3

SECTION - VIII

“A”BILL OF QUANTITIES

ANDPRICE BID


4

- B L A N K -


5

Name of work: - Construction of two storied Sub-station cum office building with provision of vertical expansion in future at Pragati Road, Agartala. (Re-call)

ItemNo

Description of items QuantityRate

(in Rs.)Unit

Amount(in Rs.)

1 Earth work in excavation over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed.

441.75Cum. 95.60

Per Cum. 42231.00- All kinds of soil

2 Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

623.89Cum. 113.40


3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

710.43Cum. 48.80


4 Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. 182.62

Cum. 424.40Per

Cum. 77504.00

5

Earth work in excavation in all kind of soil and filling in ground depression, pond etc in regular horizontal layers each not exceeding 20 cm in depth, consolidating, watering, rolling each layer with ½ ton roller or wooden or steel rammer and rolling every 3rd layer & top most layer with power roller minimum 8 ton including carriage of earth by mechanical transport from average distance of 10 km with all lead and lift (earth shall be arranged by the agency at his own cost and risk) as per direction of Engineer-in-charge. 1080.00

Cum. 273.72Per

Cum. 295618.00520771.00


6

Item No


(in Rs.)Unit

Amount(in Rs.)

B.F. 520771.00

6 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering –

57.361Cum. 4641.90

Per Cum. 266264.00

A. All work upto plinth level:

i) 1:4:8 (1 Cement: 4 fine sand: 8 graded well burnt brick aggregate 40 mm nominal size).

ii) 1:3:6 (1 Cement: 3 fine sand: 6 graded well burnt brick aggregate 40 mm nominal size). 52.67 Cum. 4938.80

Per Cum. 260127.00

7 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement -

449.62Cum. 6908.20

Per Cum. 3106065.00

A. All work upto plinth level;

i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

8 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement –

176.12Cum. 7168.70

Per cum. 1262551.00

A. RCC work in suspended floors, roofs having slope upto 15° landings, balconies, shelves and chajjas.

i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

9 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-

85.47 Cum. 7181.40Per

Cum. 613794.00

A. RCC work in beams, lintels, bands, plain window sills, staircases and spiral staircases excluding precast spiral staircase.

i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size).

10 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and

6029572.00


7

Item No


(in Rs.)Unit

Amount(in Rs.)

B.F. 6029572.00

struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-

51.84 Cum. 7296.40Per

Cum. 378245.00

A. In plinth and skirting courses, fillets, columns, pillars, posts and struts.

i) 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size).

11 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level.

98923.40Kg. 63.30

Per Kg. 6261851.00

i) Thermo-Mechanically Treated bars / Cold twisted deformed steel bars

12 Centering shuttering including struttings, propping etc. and removal of form work for:

1045.91Sqm. 135.90

Per Sqm. 142139.00

i) Foundations, footings, bases for columns etc. for mass concrete with timber plank.

ii) Suspended floors, roofs, landings, balconies and access platform with timber planks. 80.00 Sqm. 211.20

Per Sqm. 16896.00

iii) Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply.

1177.66Sqm. 225.20

Per Sqm. 265209.00

iv) Weather shade, Chajjas, corbels etc., including edges.

104.28Sqm. 254.70

Per Sqm. 26560.00

v) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank.

259.13Sqm. 183.00

Per Sqm. 47421.00

vi) Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply

590.04Sqm. 205.60

Per Sqm. 121312.00

vii) Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank. 20.40 Sqm. 261.20

Per Sqm. 5328.00

viii) Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply 20.40 Sqm. 275.80

Per Sqm. 5626.00

ix) Stairs (excluding landings) except spiral-staircases with wooden plank. 42.84 Sqm. 241.40

Per Sqm. 10342.00

13 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits.

13310501.00


8

Item No


(in Rs.)Unit

Amount(in Rs.)

B.F. 13310501.00

i) 40 mm thick.2.25 Sqm. 422.60

Per Sqm. 951.00

14 First class brick work in foundation and plinth including cost of all materials as required complete:-

34.37 Cum. 3815.70Per

Cum. 131146.00i) In cement mortar 1:6 (1 cement : 6 fine sand).

15 First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-

147.845 Cum. 4131.50

Per Cum. 610821.00i) In cement mortar 1:6 (1 cement : 6 fine sand).

16 Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-

70.08 Sqm. 534.40Per

Sqm. 37451.00i) In cement mortar 1:4 (1 cement : 4 fine sand).

17 Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-

462.39Sqm. 577.80

Per Sqm. 267169.00i) In cement mortar 1:4 (1 cement : 4 fine sand).

18 Providing and fixing aluminium work for doors, windows, ventilators, stair railing including hand rail and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling to be paid for separately) :-

817.76 Kg. 402.90Per Kg. 329476.00

A. For fixed portion of approved quality:-

i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).

B. For shutters / sliding shutters of doors, windows & ventilators including providing and fixing hinges / pivots / rollers and making provision for fixing fittings wherever required including the cost of PVC / neoprene gasket required of approved quality (Fittings shall bepaid for separately):-

14687515.00


9

Item No


(in Rs.)Unit

Amount(in Rs.)

B.F. 14687515.00

i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). 891.90 Kg. 491.20

Per Kg. 438101.00

19 Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition frames with PVC / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge :-

13.98 Sqm. 711.90Per

Sqm. 9952.00

A. With glass / float glass panes of 4.0 mm thickness (weight not less than 10.0 kg / sqm).

B. With glass / float glass panes of 5.5 mm thickness (weight not less than 13.50 kg / sqm).

149.76Sqm. 809.60

Per Sqm. 121246.00

20 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part-I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

10.98 Sqm. 1728.60Per

Sqm. 18980.00

i) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

21 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :

0.18 Cum. 35472.80Per

Cum. 6385.00i) Karai wood.

22 35 mm thick shutter bonded with Phenol Formaldehyde or adhesives conforming to Boiling Water Proof (BWP) grade of IS : 848 and have trim ability option of 12.50 mm from all sided with flexibility for painting or polishing to match any interiors including ISI marked Stainless Steel butt hinges as per IS :12817 with necessary screws. 6.69 Sqm. 2187.70

Per Sqm. 14636.00

23 Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-in-charge.

2.52 Sqm. 1048.60Per

Sqm. 2642.00

A. Gamair Wood.

i) 35 mm thick shutters.

15299457.00


10

Item No


(in Rs.)Unit

Amount(in Rs.)

B.F. 15299457.00

24 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass (weight not less than 10 ks /Sqm) panes including black enamelled ISI marked MS butt hinges with necessary screws.

2.10 Sqm. 1419.00Per

Sqm. 2980.00

A. Gamair Wood.

i) 35 mm thick.

25 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.

3337.20Kg. 83.50

Per Kg. 278656.00

i) Fixed to openings / wooden frames with rawl plugs screws etc.

26 Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm at 100 mm centre to centre and braced with flat iron diagonals 20 x 5 mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast / anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required. 14.40 Sqm. 3026.10

Per Sqm. 43576.00

27 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 13 Nos. 88.30 Each. 1148.00

28 Providing and fixing chromium plated brass handles with necessary screws etc. complete:

26 Nos. 146.80 Each. 3817.00i) 125 mm.

ii) 75 mm.24 Nos. 104.90 Each. 2518.00

29 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

26 Nos. 115.50 Each. 3003.00i) 300 x 10 mm.

ii) 100 x 10 mm.24 Nos. 52.20 Each. 1253.00

30 Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc.complete.

25 Nos. 102.60 Each. 2565.00i) 300 x 16 mm.

15638973.00


11

Item No


(in Rs.)Unit

Amount(in Rs.)

B.F. 15638973.00

31 Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete.

40 Nos. 105.10 Each. 4204.00

32 Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension, as below (tolerance +/-1mm) with wall thickness 2.0mm+/- 02mm. Cornars of the door frame to be jointed with galvanized brackets and stainless screws, joint mitred and plastic wilded. The hinge side vertical of the frames reinforced by galvanized MS tube of size 19x19 mm and 1 mm+/- 0.1 mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge.

60.00 Mtr. 203.60Per Mtr. 12216.00

i) Extruded section profile size 48 x 40 mm.

33 30 mm thick factory made polyvinyl chloride (PVC) door shutter made of styles and rails of a UPVC profile section of size 30mm x 60mm and wall thickness 2mm +_ 0.2mm with inbuilt decorative moulding edging on one side. The styles and rails with plastic brackets of size 75x220 mm mitred and welded at the corners. The styles of the shutter reinforced by inserting galvanised MS tube of size 25x20 mm and 1mm +_0.1 mm wall thickness. The lock rail made up of "H" section, a UPVC profile section of size 30x100 mm and 2 mm +_0.2 mm wall thickness welded to the shutter style with a UPVC profile section single panel of size not less than 620mm, having overall thickness of 20 mm and 1 mm +_ 0.1 mm wall thickness with 20 mm panel beading of suitable size/Glass (4 mm thick plain glass)/ louver section, louver frame of suitable size, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and Bathroom door shutter).

20.16 Sqm. 2341.00Per

Sqm. 47195.00

34 Providing and fixing 100 mm brass locks (bestmake of approved quality) with 6 levers without pair of handles for aluminium doors including necessary cutting and making good etc. complete as per direction of Engineer-in-charge.

10 Nos. 278.20 Each. 2782.0015705370.00


12

Item No


(in Rs.)Unit

Amount(in Rs.)

B.F. 15705370.00

35 Providing and fixing Kota stone in floors over 20 mm thick bed of cement mortar 1 : 4 (1 cement : 4 fine sand) jointed with ordinary cement slurry including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishing complete.

399.11Sqm. 936.40

Per Sqm. 373727.00i) Kota stone slab 30 mm thick.

36 Providing and laying 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1 : 2 : 4 (1 ordinary cement : 2 fine sand : 4 graded well burnt brick aggregate 12.5 mm nominal size) and top layer 12 mm thick with white, black, chocolate, grey, yellow, pink, blue or green marble chips of sizes from 7 mm to 10 mm nominal size laid in cement marble powder mix 3 : 1 (3 cement : 1 marble powder) by weight in proportion of 2 : 3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete.

168.40Sqm. 650.50

Per Sqm. 109544.00

i) Using light shade pigment with white cement in top layer.

37 Providing and laying marble chips skirting (upto 300 mm. height) rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow, pink, blue or green marble chips of sizes from 1 mm to 4 mm nominal size laid in cement marble powder mix 3 : 1 (3 cement : 1 marble powder) by weight in proportion of 4 : 7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete.

20.40 Sqm. 501.00Per

Sqm. 10220.00

A. 18 mm thick with under layer 12 mm thick cement plaster 1 : 3 (1 Cement : 3 fine sand).

i) Using light shade pigment with white cement in top layer.

38 Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 % and conforming to IS : 15622 of approved make in all colours, shades over 20 mm thick bed of cement mortar 1 : 4 (1 cement : 4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.

103.50Sqm. 1261.50

Per Sqm. 130565.00i) Size of tile 60 x 60 cm.

16329426.00


13

Item No


(in Rs.)Unit

Amount(in Rs.)

B.F. 16329426.00

39 Providing and laying 1st quality ceramic glazed floor tiles 300 x 300 mm conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in colours, shades such as white, ivory, grey, fume red, brown over 20 mm thick bed of cement mortar 1 : 4 (1 cement : 4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.

294.00Sqm. 763.40

Per Sqm. 224440.00

40 Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete.

254.50Sqm. 393.40

Per Sqm. 100120.00i) 50 mm thick.

41 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.

192.78Sqm. 652.00

Per Sqm. 125693.00

42 12 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete.

1865.92Sqm. 76.90

Per Sqm. 143489.00i) In cement mortar 1: 6 (1 cement : 6 fine sand)


852.84Sqm. 89.60



1708.58Sqm. 82.60



258.62Sqm. 90.20


17164039.00


14

Item No


(in Rs.)Unit

Amount(in Rs.)

B.F. 17164039.00

46 Neat cement punning. 258.62Sqm. 28.70

Per Sqm. 7422.00

47 Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture on new work (two or more coats applied @ 1.67 kg / 10 sqm) over and including base coat water proofing cement paint applied @ 2.20 kg / 10 sqm complete.

710.34Sqm. 65.20

Per Sqm. 46314.00

48 Wall painting with plastic emulsion paint (twoor more coats) of required colour of approved brand and manufacture on new work to give an even shade.

2008.42Sqm. 51.20

Per Sqm. 102831.00

49 Distempering with 1st quality acrylic washable distemper of approved brand and manufacture and of required shade on new work (two or more coats) to give an even shade over and including a priming coat of cement primer complete.

1708.58Sqm. 38.20

Per Sqm. 65268.00

50 Applying priming coat:

11.09 Sqm. 19.90Per

Sqm. 221.00

i) With ready mixed pink primer of approved brand and manufacture on wood work (hard & soft wood).

ii) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, galvanised iron / steel work. 46.40 Sqm. 14.80

Per Sqm. 687.00

51 Painting with synthetic enamel paint (two or more coats) of required colour of approved brand and manufacture on new work to give an even shade. 57.49 Sqm. 43.60

Per sqm. 2507.00

52 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

238.49Sqm. 140.60

Per sqm. 33532.00

53 Varnishing with varnish of approved brand and manufacturer.

55.84 Sqm. 68.70Per

Sqm. 3836.00

i) Two or more coats of glue with copal varnish over an under coat of flatting varnish.

54 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

17426657.00


15

Item No.


(in Rs.)Unit

Amount(in Rs.)

B.F. 17426657.00

i) White Vitreous china Orrisa pattern W.C. pan of size 580 x 440 mm with integral type footrests. 5 Nos. 3587.00 Each. 17935.00

55 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

5 Nos. 3708.40 Each. 18542.00

i) W.C. pan with ISI marked white solid plastic seat and lid.

56 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

12 Nos. 1581.50 Each. 18978.00

White Vitreous China Flat back wash basin size 450 x 300 mm with single 15 mm C.P. brass pillar tap.

57 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 12 Nos. 965.80 Each. 11590.00

58 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x265 mm sizes respectively. 8 Nos. 795.20 Each. 6362.00

59 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. 4 Nos. 1414.00 Each. 5656.00

60 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings comp.

12 Nos. 73.00 Each. 876.00

A. Semi rigid pipe.

i) 32 mm dia.

61 Providing and fixing 100 mm sand cast Iron grating for gully trap. 12 Nos. 41.00 Each. 492.00

62 Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 12 Nos. 677.10 Each. 8125.00

17515213.00


16

Item No.


(in Rs.)Unit

Amount(in Rs.)

B.F. 17515213.00

63 Providing and fixing 600 x 120 x 5 mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 12 Nos. 322.10 Each. 3865.00

64 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved 450mm long towel rail with total length of 495mm, 78mm wide and effective height quality and colour.

10 Nos. 523.30 Each. 5233.00

i) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

65 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms. 12 Nos. 194.00 Each. 2328.00

66 Providing and fixing soil, waste and vent pipes:

122.875Mtr. 657.40

Per Mtr. 80778.00

A. 100 mm. dia.

i) Sand cast iron S & S pipe as per IS : 1729.

B. 75 mm diameter :79.875

Mtr. 575.80Per Mtr. 45992.00i) Sand cast iron S & S pipe as per IS : 1729.

67 Providing and fixing M.S. holder bat clamp of approved design to sand cast iron / cast iron (spun) pipes comprising of M.S. flat brackets made of 50 x 5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4 nos., 6 mm dia expansion hold fasteners including drilling necessary holes in brick wall / CC / RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x 1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25 x 6 mm, one bolts on each side of the pipe.

38 Nos. 192.40 Each. 7311.00

i) Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipes).

68 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

17660720.00


17

Item No.


(in Rs.)Unit

Amount(in Rs.)

B.F. 17660720.00

A. 100 mm dia.

14 Nos. 406.00 Each. 5684.00i) Sand cast iron S & S as per IS : 1729.

B. 75 mm dia.


69 Providing and fixing plain bend of required degree.

7 Nos. 345.30 Each. 2417.00

A. Sand cast iron S & S as per IS : 1729.

i) 100 mm. dia.

B. Sand cast iron S & S as per IS : 1729.

7 Nos. 272.10 Each. 1905.00i) 75 mm. dia.

70 Providing and fixing heel rest sanitary bend.

8 Nos. 395.10 Each. 3161.00


i) 100 mm. dia.


3 Nos. 357.10 Each. 1071.00i) 75 mm. dia.

71 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

8 Nos. 644.60 Each. 5157.00


i) 100 x 100 x 100 mm.


6 Nos. 469.50 Each. 2817.00i) 75 x 75 x 75 mm.

72 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :

2 Nos. 824.20 Each. 1648.00


i) 100 x 100 x 100 x 100 mm.


2 Nos. 645.10 Each. 1290.00i) 75 x 75 x 75 x 75 mm.

73 Providing and fixing collar:

68 Nos. 223.80 Each. 15218.00

A. 100 mm.

i) Sand cast iron S & S as per IS : 1729.

17705593.00


18

Item No.


(in Rs.)Unit

Amount(in Rs.)

B.F. 17705593.00

B. 75 mm.


74 Providing and fixing terminal guard:

7 Nos. 238.60 Each. 1670.00

A. 100 mm.

i) Sand cast iron S & S as per IS : 1729.

B. 75 mm.


75 Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1cement: 4 coarse sand):

2.00 Mtr. 201.90Per Mtr. 404.00i) 100 mm dia.

ii) 75 mm dia.1.25 Mtr. 150.70

Per Mtr. 188.00

76 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931.

20 Nos. 436.90 Each. 8738.00i) 15 mm nominal bore.

77 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931.

18 Nos. 486.10 Each 8750.00i) 15 mm nominal bore.

78 Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931.


79 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.


80 Providing and fixing G.I pipes complete with G.I. fittings and clamps, including making good the walls / floor etc. concealed pipe including painting two coats or more with anticorrosive bitumastic paint, cutting chases and making good the same.

41.60 Mtr. 265.60Per Mtr. 11049.00i) 15 mm dia nominal bore.

17755472.00


19

Item No.


(in Rs.)Unit

Amount(in Rs.)

B.F. 17755472.00

ii) 20 mm dia nominal bore.33.00 Mtr. 315.80

Per Mtr. 10421.00

81 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.

10.50 Mtr. 173.30Per Mtr. 1820.00

A. Internal work - Exposed on wall.

i) 15 mm dia. nominal bore.

ii) 20 mm dia. nominal bore.12.50 Mtr. 215.80

Per Mtr. 2698.00

iii) 25 mm dia. nominal bore. 59.175Mtr. 269.40

Per Mtr. 15942.00

iv) 32 mm dia. nominal bore.34.00 Mtr. 363.10

Per Mtr. 12345.00

82 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

19.00 Mtr. 244.80Per Mtr. 4651.00

A. External work.

i) 25 mm dia. nominal bore.

ii) 32 mm dia. nominal bore.60.00 Mtr. 323.80

Per Mtr. 19428.00

iii) 40 mm dia. nominal bore.40.00 Mtr. 365.50

Per Mtr. 14620.00

83 Providing and fixing brass stop cock of approved quality :


ii) 20 mm nominal bore.8 Nos. 371.30 Each. 2970.00

84 Providing and fixing uplasticised PVC connection pipe with brass unions :

12 Nos. 91.80 Each. 1102.00

A. 45 cm. length.

i) 15 mm nominal bore.

85 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

2000.00Ltr. 7.90

Per Ltr. 15800.00

86 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work :

17858581.00


20

Item No.


(in Rs.)Unit

Amount(in Rs.)

B.F. 17858581.00

i) 15 mm diameter pipe.10.50 Mtr. 5.00

Per Mtr. 53.00

ii) 20 mm diameter pipe.12.50 Mtr. 5.60

Per Mtr. 70.00

iii) 25 mm diameter pipe. 59.175Mtr. 7.30

Per Mtr. 432.00

iv) 32 mm diameter pipe.34.00 Mtr. 8.90

Per Mtr. 303.00

87 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete :

50.00 Mtr. 216.00Per Mtr. 10800.00i) 150 mm diameter.

88 Supplying and fixing C.I. cover without frame for manholes :

2 Nos. 1475.10 Each. 2950.00

i) 455 x 610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.

89 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455 x 610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :

6 Nos. 5343.30 Each. 32060.00

i) Inside dimensions 455 x 610 mm and 45 cm deep for single pipe line :

90 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 1 No. 34887.30 Each. 34887.00

91 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:

17940136.00


21

Item No.


(in Rs.)Unit

Amount(in Rs.)

B.F. 17940136.00

i) Single socketed pipe - 110 mm OD. 127.50Mtr. 205.80

Per Mtr. 26240.00

92 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:

42 Nos. 129.60 Each. 5443.00

A. Coupler.

i) 110 mm.

93 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1 cement : 4 fine sand) making good the wall etc. complete.

283 Nos. 96.50 Each. 27310.00i) 110 mm.

94 Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100 gm. complete. 12 Nos. 73.50 Each. 882.00

95 Supplying chemical emulsion in sealed containers including delivery as specified.

171.44 Ltr. 228.70Per Ltr. 39208.00

i) Chlorpyriphos / Lindane emulsifiable concentrate of 20%.

96 Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemicalemulsion) and continuous chemical barrier under and alround the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth of which apron is to be laid, surroundings of pipes and conduits etc. complete as per specification. The work should be carried out as per IS : 6313 (Part II) - Latest revision [Plinth area of the building at ground floor only shall be measured for payment] :

685.758Sqm. 80.10

Per Sqm. 54929.00

i) With Chlorpyriphos / Lindane E.C. 20% with 1% concentration.

18094148.00


22

Item No.


(in Rs.)Unit

Amount(in Rs.)

B.F. 18094148.00

97 Providing and fixing 2 HP single Phase monoblock pump set (pump & motor) ISI marked and approved quality (Crompton greaves) or equivalent including electric installation by providing delta starter etc. with necessary connection with delivery and suction line complete as per direction of the Engineer-in-charge. 2 Nos. 12114.00 Each. 24228.00

18118376.00

(Rupees One Crore Eighty One Lakh Eighteen Thousand Three Hundred and Seventy Six) only.


23

SCHEDULEPRICE BID

Date…………………..To,The Deputy General ManagerCentral Civil Division79-Tilla, Agartala, West Tripura.

Authorized address for communication: -

Telephone nos.: -

Mobile Nos.: -

Fax no.: -

Email ID: -

Name of Work: - Construction of two storied Sub-station cum office building with provision of vertical expansion in future at Pragati Road, Agartala. (Re-call)

1. I / WE offer to execute the work(s) described above and remedy any defects therein with conditions of the contract, specifications, drawings, Bill of quantities and Addenda for

a. Item rate Contract (Total Bid Price) Rs………………..............*(NOT APPLICABLE HERE).

b. For percentage Rate Contract,…………………………… (in figures)……………………….

…………… …………………………………………………………………………….. (in words)

Percent below / above / at par with the rates entered in the schedule of rates, as referred to clause 12 of ITB.

1. I / WE undertake to commence the work(s) on receiving the notice to precede with work in accordance with the contract documents.

2. This bid and your written acceptance of it shall constitute a binding contract between us. I understand that you are not bound to accept the lowest or any bid you receive.

I / WE hereby confirm that this bid complies with the Bid validity and earnest money required by the bidding documents and specified in NIT.

Authorized Signature……………………………….

Name and Title of Signatory…………………………

Name of the Bidder……………………………………

Address………………………………………………..

………………………………………………………...


24

- B L A N K -


25

BILL OF QUANTITIES

PREAMBLE

1. The Bill of quantity shall be read in conjunction with the instruction to Bidders, conditions of contract, Specifications and drawings.

2.1. For the construction works, the quantities given in the Schedule of quantities are estimated, and are given to provide a common basis for bidding. The basis of payment will be the actual quantities of the work ordered and carried out, as measured and verified by the Manager (Engineer) and valued

a. At the rates and prices tendered in the Schedule of quantities in the case of item rate tenders; and

b. At percentage rate above or below or at par of the schedule of rates as tendered by the contractor.

2.2 The rates and prices tendered in the priced bill of quantities shall, except in so far as it is otherwise provided under the contract, include all constructional plant, labour, supervision, materials, erection, maintenance, insurance, profit, taxes and duties, together with all general risks, liabilities and obligations, etc. set out in the contract.

3. Discrepancies between rate in figures and words if arises, will govern by the Clause no 14 of NIT & Clause no. 24 of ITB.

4. When percentage rate tenders are invited, the Schedule of quantities will show in the bidding documents the rates used for different items.


26

BILL OF QUANTITIES FOR PERCENTAGE RATE BIDS

Sl NoDescription

of ItemQuantity Unit

RateAmount

In Figures In words

1.For description of items & schedule of quantities, refer page 5 (five) to page 22

(twenty-two) of bidding documents.

Documents

PRICE BID - TSECL Bid... · 2 Earth work in excavation in foundation trenches ... fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required