On behalf of MAGNA STEYR we offer for Sale ex Location Germany:

Complete and Automatic Line for the Production of

Pressure Air Tanks

Line was installed and commissioned in 2009

1) Data of Air Pressure Tanks produced:

- Diameters: 144 / 154 / 206 / 246 / 276 mm (140 – 300 mm) - Length: between 212 and 1.354 mm (200 – 1.400 mm) - Material Thickness 2,0 – 3,0 mm (steel sheet metal) - Product and Quality Standard according to EN 286-2 - Pressure Air Tanks produced on this line have been used for DAIMLER Trucks

2) Features of Production Line:

- Cycle Time: 16 – 27 Sec (according to Tank Size) - Welding Speed: up to 5 m/ min - Rate of Consistance: 5,6 x 10 -3/mbar x L/Sec - TRIBO-Powder coating layer thickness: external > 60 ym / internal > 30 ym - Baking Temparature of Powder: 15 Min at 180 °C - Run-Through-Time per Tank (blank loading to packing): 180 Min

Plant Overview:

3) Sub-Lines and Components of Production Line:

OP 10 / Production of both End-Covers:

- CISAM 2000DEF CT/3-67 De-Coiler - CISAM RA 3000/18/100 Feeder and Leveller - ELMA ETD 800 NQ Round Cutting Unit with Hydraulic Scrap Shear - 2 of GIGANT G2-315/2 Hydraulic Presses - PERO KDA 65 WSNT Cover Degreasing Washer

OP 20 / Production of Tank Body:

- WEIL-ENGINEERING Sheet-Metal-Blank Punching and Marking Unit - WEIL-ENGINEERING twin-roll bending machine - WEIL-ENGINEERING Tank longitudinal welding Unit - 2 of WEIL-ENGINEERING Thread-Ring welding Unit - 2 of M+P Length cutting of Tank-Body - 2 of WEIL ENGINEERING Orbital-Tank Welding Units - 4 of TRUMPF TruFlow 8000 (8 Kw) Co2 Lasers - 2 of ROFIN SINAR FL 020 (2 Kw) Lasers with KKT Coolant Units - WEIL-ENGINEERING Linear-Transfer System

OP 25 / out of line Welding Cell:

- Automatic Welding Cell for special Air Pressure Tanks with o FRONIUS TransPuls Synergic 3200 MAG welding unit o KUKA Robot

OP 30 / Quality Assurance:

- 4-Station Ultrasonic and Leak Test Installation - Pressure Testing (up to 30 bars) - 2 of REIS RL 80 Linear Robots with X= approx. 25 meters - 2 of REIS KR 240 L 180-2-2000 Robots with 7th-Axes - Conveyor Belt - Safety Fencing

Test Line Handling Equipment REIS:

OP 40 / Powder Coating Line:

- REIDEL & SOELCH 7-Zones Pre-Treatment Line - LEUTENEGGER+FREI HWT Water Drying Furnace with Coolant Zone - M+S TRIBO Powder Coating Line (internal / 12 Lances + external / 48 Lances) - LEUTENEGGER+FREI EBO Baking Furnace with Coolant Zone

OP 60 / End of Line:

- Testing and Final Machining Station - KUKA KR 210 L 180-2-2000 Robot

OP 210 / Conveyor System:

- CSF Overhead-Conveyor System with o 64 Carriers (5.000 x 2.500 x 100 mm) for 12 Tanks each o 1 main chain (3 drives) o 9 sub chains with seperate drives o Total chain length: approx.. 4.000 meters

OP 220 / Water Treatment:

- Clean water treatment and preparation - Water degassing - Waste water treatment

4) Flow-Chart and Layout of the Line:

Some of the Workshop and Warehouse Equipment coming up for Sale as well:

_______________________________________________________________________________________________ General Information: - Inspections by appointment only! PRIOR SALE RESERVED ! - All Equipment becomes offered “AS IS, WHERE IS” ! - Although Information has been given from sources deemed reliable, MAYNARDS make no warranty or guarantee, expressed

or implied, as to the accuracy of the information contained herein. - All offers are subject to approval and acceptance of the Sellers. - This Sale is based on the Terms & Conditions of MAGNA STEYR and MAYNARDS _______________________________________________________________________________________________________________________________________________

For further Details and Inspection please contact: andreas@maynards.com