Upload
hahuong
View
215
Download
1
Embed Size (px)
Citation preview
All data have been written and checked with the utmost care.Possible errors or omissions do not constitute reason for complaint.The information in this document are subject to change without notice.
The images and texts contained in this catalog are exclusive property of Elfri srl or are taken freely from the network, unless there were prohibitions for their free usage.Any complaints must be documented and forwarded to our contact address.
© Copyright 2016 by Elfri Reproduction, even in part, only with our authorization
COMPANY
In 1981, the emeritus founder Luigi Cesarin realized his business idea, founding the ELFRI,to dedicate himself bravely to the production of ‘Power Transformers'. The innate passionand strong belief brought the ELFRI to win quickly the trust of the market. Even today, asthen, the market recognizes and appreciates the provision of customized technicalsolutions, the realization of excellent craftsmanship products, prompt deliveries,reliability and after-sales service.
The passage of time has always seen a steady and measured growth.
At the beginning of 21st century, ELFRI moved to the new production site; a newdimension and a new creative lymph matured. The birth of the wide range of‘Electromagnetic Fire Door Holders' for modern systems of fire detection, is the result ofmany years of experience with similar devices for the most important and innovativeCruise ships. Modern lines and the high quality of new products, were immediatelyappreciated by the market. The constant updating of design and build quality, are themain distinguishing features of ELFRI’s products on the global market.
In 2005 ELFRI turns into Limited Liability Company with the simultaneous and definitivetakeover of the second generation, currently the Company's reins.
Today, over 35 years after its foundation, ELFRI remains a young dynamic company,constantly active in the search of innovative products, testing alternative materials tomake improvements and to optimize their products and make them more functional andsafe.
Quality has always been a milestone and binding in the company policy and it is ensuredby accurate selection of materials and the skills acquired in over three decades ofexperience.
Since 1981 the attention to customer needs, the application of the European Directives,in complying with the construction standards and electrical safety (CE mark), and the finaltest of each item before delivery to the customer guarantee to protect and to maintainthe idea of Made in Italy.
3
Young and dynamic company with experienceof over thirty years in the design andconstruction of electromechanical parts.
We serve industries with different safety andfire protection products conceived, designedand manufactured entirely by us in Italy.
Our strenghts:- QUALITY - EXPERIENCE- INNOVATION
SAFETY AND FIRE –FIGHTING ACCESSORIES
Eletromagnetic Lockspag 5-28
Electromagnetic Fire Door Holderspag 29-56
Fire Alarm Panel and Accessoriespag 57-70
4
EDT072_MElectromagnetic lock MINI 70Kg
Pag. 8
EDT152 - 302Electromagnetic lock built-in 150-300Kg
Pag. 10
EDT150 - 300 - 500Electromagnetic lock surface mount 150-300-500Kg
Pag. 12
EDT35WElectromagnetic lock Waterproof 350Kg
Pag. 14
EDTK22Electromagnetic shear lock 1200Kg
Pag. 16
STCSK2Housing box for EDTK22_S
Pag. 18
STL - STLCL Bracket – L Bracket + cover
Pag. 19
STZ – STZL – STZLC - STZLUZ Bracket – ZL Bracket – ZL Bracket + cover – ZL Bracket for glass door
Pag. 20
STUU Bracket for glass door
Pag. 23
STCHousing for keeper plate
Pag. 24
STPPlate for keeper plate
Pag. 24
AKPower supplies AC/DC for electromagnets. Battery chargers
Pag. 25
PAManual call point for opening/warning
Pag. 26
INDEX
6
ELECTROMAGNETIC LOCKS
Model EDT072_M, ideal for safety cabinets, drawers and other small rooms where it isnecessary to check the closing electrically.Supplied with "L“ bracket to orient the electromagnet in an horizontal or vertical position.The holding force is 70kg and can be powered by 12Vdc or 24Vdc, with rated current,respectively, 300mA and 150mA.Model 072_M01 is also equipped with status sensor, a contact N.C., that changes its stateif the keeper plate is attached to the electromagnet (generally with the door closed) or ifthe keeper plate is detached from the electromagnet.All electrical connections are made directly on long wires around 120mm.
VARIANT AND ACCESSORIES: Without status sensor = EDT072_M00 Z Bracket
MODEL EDT072_M70Kg
STZ072 BracketPag. 20
U072 BracketPag. 23
8
ELECTROMAGNETIC LOCKS
TYPE A B C
EDT072_Mxx 80 33 25
Keeper plate 75 33 9,7
MODEL EDT072_M
DIMENSIONS mm
Model Holding force Power Supply Rated current StatusKg Vdc mA sensor
EDT072_M00 70 12/24 300/150 noEDT072_M01 70 12/24 300/150 yes
STANDARD INSTALLATION
9
ELECTROMAGNETIC LOCKS
Models EDT152 and EDT302 are electromagnets for hidden mounting. They are used insituation where a built in installation is required. This condition makes the elctromagnetpractically invisible with the door closed.The holding force is 150Kg (EDT152) and 300Kg (EDT302) and can be powered at 12Vdcor 24Vdc, setting the voltage directly on the circuit.Models EDT152_001 and EDT302_001 are equipped with relay status sensor.The status sensor allows to discriminate the keeper plate position, whether it is attachedor not to the electromagnet when it is powered.All electrical connections are made directly on the exposed wires/terminal.
VARIANT AND ACCESSORIES: Holding force 150Kg or 300Kg Fixing brackets
MODEL EDT152 e EDT302150 kg 300kg
10
ELECTROMAGNETIC LOCKS
TYPE A B C
EDT152_xxx 174 32 26
Keeper plate 130 32 11
EDT302_xxx 228 38 27
Keeper plate 180 38 11
Model Holding force Power supply Rated current Status Kg Vdc mA sensor
EDT152_000 150 12/24 380/215 noEDT152_001 150 12/24 380/215 yesEDT302_000 300 12/24 530/290 noEDT302_001 300 12/24 530/290 yes
MODEL EDT152 e EDT302
DIMENSIONS mm
11
ELECTROMAGNETIC LOCKS
Models EDT150, EDT300 and EDT500 electromagnets are used for mounting on thesurface of the door frame.The holding force is 150Kg, 300Kg or 500Kg and can be powered at 2Vdc or 24Vdc, settingthe voltage directly on the circuit.Models EDT150_001, EDT300_001 and EDT500_001 are equipped with status sensor withrelay and contacts N.C. and N.O. and two-color led to indicate the door position.The status sensor allows to discriminate the keeper plate position, whether it is attachedor not to the electromagnet when it is powered.All electrical connections are made directly to the terminals of the circuit located on theinside.
VARIANT AND ACCESSORIES: Holding force 150Kg, 300Kg and 500Kg Fixing brackets Timer for delay closure (only EDT300)
L Bracket ZL Bracket U Bracket Housing PlatePag. 19 Pag. 20 Pag. 23 Pag. 24 Pag. 24
MODEL EDT150, EDT300 e EDT500150Kg 300Kg 500Kg
12
ELECTROMAGNETIC LOCKS
TYPE A B C
EDT150_000 170 36 21
Keeper plate 130 33 9,5
EDT150_001 210 40 21
Keeper plate 130 33 11
EDT300_00x 250 48 24
Keeper plate 180 38 11
EDT500_00x 270 76 40
Keeper plate 185 61 16,5
MODEL EDT150, EDT300 e EDT500
DIMENSIONS mm
Model Holding force Power supply Rated current Status TimerKg Vdc mA sensor
EDT150_000 150 12/24 380/215 no noEDT150_001 150 12/24 380/215 yes noEDT300_000 300 12/24 530/290 no noEDT300_001 300 12/24 530/290 yes noEDT300_002 300 12/24 530/290 yes yesEDT500_000 500 12/24 450/255 no noEDT500_001 500 12/24 450/255 yes no
STANDARD INSTALLATION
STANDARD INSTALLATION
13
ELECTROMAGNETIC LOCKS
Model EDT35W (waterproof) is an electromagnet suitable for outdoor installation. Thestainless steel body and the appropriate insulation of the electrical parts, allow a highdegree of protection (IP68) that guarantee a correct operation even in high humidityenvironments.The holding force is 350Kg and can be powered 12Vdc or 24Vdc.EDT35W_001 model is equipped with status sensor.The status sensor allows to discriminate the keeper plate position, whether it is attachedor not to the electromagnet when it is powered.All electrical connections are made directly on the exposed wires/terminal.
VARIANT AND ACCESSORIES: Fixing brackets
ZL35 bracketPag. 20
MODEL EDT35W waterproof - IP68350Kg
14
ELECTROMAGNETIC LOCKS
TYPE A B C
EDT35W_xxx 228 53 29,5
Keeper plate 190 45 11
MODEL EDT35W
DIMENSIONS mm
Model Holding Force Power supply Rated current StatusKg Vdc mA sensor
EDT35W_000 350 12/24 500/250 noEDT35W_001 350 12/24 500/250 yes
STANDARD INSTALLATION
15
ELECTROMAGNETIC LOCKS
Model EDTK22 is an electromagnet “shear lock” type for hidden mounting. It is used insituations where a built-in installation is needed. This condition makes the electromagnetvirtually invisible with the door closed. The construction type of the electromagnet,allows a mechanical seal implemented electromagnetically, this is why you get a highresistance force at the opening of hinged doors.The holding force is 1200 kg and can be supplied either 12Vdc or 24Vdc without manualadjustments.Model EDTK22_S02 is equipped with a position sensor (reed), status sensor (hall effect),two-color LED to indicate the door status (closed=green – open=red) and an adjustabletimer for closing delay.The position sensor allows to know the position of the keeper plate, therefore of the door.The status sensor allows to know the power status and the position of the keeper plate.N.O. – COM – N.C. contacts available.
VARIANT AND ACCESSORIES: Housing for surface mounting
HousingPag. 18
MODEL EDTK22 shear lock1200Kg
16
ELECTROMAGNETIC LOCKS
TYPE A B C
EDTK22_Sxx 182 30 25
Keeper plate 182 30 23,6
Model Holding Power Trigger Rated Status Position Timerforce supply current sensor sensor sec
Kg Vdc mA mA yes yesEDTK22_S02 1200 12/24 900/900 220/190 MAX 24V/1A MAX 30V/0,25A 1-25
MODEL EDTK22
DIMENSIONS mm
17
ELECTROMAGNETIC LOCKS
STCSK2 elegant aluminum housing to install electromagnet shear lock EDTK22 on thesurface instead of built-in. Two identical housings included: one for the electromagnet andone for the keeper plate.
EDTK22Pag. 16
TYPE A B C
STCSK22X 208 44,2 46,2
Y 208 44,2 46,2
DIMENSIONS mm
MODEL STCSK2
X
Y
18
ELECTROMAGNETIC LOCKS
STL Bracket used for surface mounting of the electromagnets where it is not possible toinstall them on the horizontal side of the frame. Made of anodized aluminum, it allows tofix the electromagnet on the vertical side of the frame.,STLC Bracket is similar to STL bracket, with the addition of an elegant anodized aluminumcover that allows to hide part of the bracket.
DIMENSIONS mm
TYPE For models A B C D
STL1EDT150EDT151 210 38 25 3
STL3EDT300EDT301 250 38 38 4
STL5EDT500EDT501 268 50,5 50,5 6
STLC3EDT300EDT301 253 51,5 31
MODEL STL STLC
STL
STLC
19
ELECTROMAGNETIC LOCKS
STZ Bracket for electromagnetic lock mini model EDT072_M.In anodised aluminum, it is generally used to fix the keeper plate to the moving part(door leaf/drawer).
STZL Bracket is used for surface mounting of the electromagnet if the opening directionof the door is to «pull». In anodised aluminum, the kit includs a «L» bracket to fix theelectromagnet on the vertical surface of the door frame and a «Z» bracket to fix thekeeper plate to the door leaf.
STZLC bracket is similar to STZL, with the addition of an elegant anodised aluminum coverthat allows to hide part of the bracket.
MODEL STZL STZ STZLC
20
ELECTROMAGNETIC LOCKS
TYPE For models A B C* D E
STZ072Z
EDT072_M 75 38 38-48 3,5-4,5 38
STZL1L EDT150 210 38 25 3
Z EDT151 140 38 38-53 4 38
STZL3L EDT300 250 46 30 4 – 5
Z EDT301 180 46 46-56 4 46
STZL35L
EDT35W250 55,5 31 4 – 5
Z 190 57 50-60 4,5 57
STZL5L EDT500 268 73 46 6
Z EDT501 185 63 63-73 6 63
STZLC3L EDT300 250 46 30 4 – 5
Z EDT301 253 81 60–70 8 45
MODEL STZ – STZL – STZLC
DIMENSIONS mm
Z
L
* adjustable
STZL
STZLC3
21
ELECTROMAGNETIC LOCKS
TYPE For models A B C* D E F
STZLU3L EDT300 250 43 54 4 15 3
Z EDT301 250 80 70-80 4 15
MODEL STZLU
DIMENSIONS mm
L
Z
* Adjustable Z bracket
STZLU Bracket is used on glass door with opening direction «to pull», frameless. It can beapplied in different thickness glasses.In anodised aluminum, the kit includs a «L» bracket to fix the electromagnet on thevertical surface of the «glass frame» and a «Z» bracket to fix the keeper plate to the glassdoor.
MODEL STZLU
22
ELECTROMAGNETIC LOCKS
STU bracket is used to fix the keeper plate on glass door «to push», frameless. It can beapplied in different thickness glasses.Traditional fixing of the electromagnet, in case of need a «L» bracket can be added.
MODEL STU
TYPE For models A B C D E
STU072 EDT072 75 28 41 16 9
STU3EDT300EDT301 180 24 39 15 6
MODEL STU
DIMENSIONS mm
23
ELECTROMAGNETIC LOCKS
STC housing is used to fix the keeper plate to the door, especially when it is not possibleto make a through hole for the keeper plate.
STP plate is used to fix the keeper plate to the door when it is not possible to make athrough hole for the keeper plate.
MODEL STC STP
TYPE Formodels
A B C
STC3EDT300EDT301 188 45 17
STC5EDT500EDT501 193 68 19
MODEL STC
DIMENSIONS mm
MODEL STP
DIMENSIONS mm
TYPE formodels
A B C
STP3EDT300EDT301 187 38 6
STP5EDT500EDT501 187 64 10
24
ELECTROMAGNETIC LOCKS
Models AK, range of power supplies with switching technology, small dimensions,ideal to provide DC power to the electromagnets.The input is from the network (110Vac or 230Vac), while the output is 12Vdc or24Vdc.The range includes modular models (C) for DIN rail switchboards, mini models forfreestanding installation (B), mini models (A) suitable for insertion into bears fruitboxes with 3 modules.
POWER SUPPLIES AND BATTERY CHARGE AK
Model Output Output Input DIN Modules Type DimensionsAmp Vdc Vac Nr mm
AKM24005_000 0,5 24 100÷240 - A 56x33x56AKM12010_000 1,0 12 100÷240 - A 56x33x56AKM12020_000 2,0 12 100÷240 - B 60x37x85AKM12030_000 3,0 12 100÷240 - B 90x37x80AKD24015_000 1,5 24 100÷240 4 C 65x90x70AKD12025_000 2,5 12 100÷240 4 C 65x90x70AKD24025_000 2,5 24 100÷240 4 C 65x90x70AKD12040_000 4,0 12 100÷240 4 C 65x90x70AKD24045_000 4,5 14 100÷240 4 C 65x90x70AKD12075_000 7,5 12 110 o 230 7 C 125x90x70
Charger in DIN case, can be used with an AK series power supply and a max 24Ah buffer battery. It has a dry contact for remote signaling. The power supply input is from 12 or 24Vdc self-adjusting. The output current is 16A (12Vdc) or 10A (24Vdc).
Model Output Output Input DIN Modules Type DimensionsAmp Vdc Vac Nr mm
AKC12160_000 16/10 12/24 12-24 4 C 65x90x70
25
ELECTROMAGNETIC LOCKS
The Manual Call Point PA, EN54-11 certificated, is used on conventional alarm systems.It has an IP40 Grade of protection and is available in the following colors: red, green,yellow, white and blue.The alarm is activated by manual pressure on the highlighted part of the normalizeduniversal screen printing.The appearance of yellow color in the plastic plate indicates the correct activation of thealarm signal.Following the manual intervention, you can restore the button with a simple operationusing the key (CR) provided.You can perform a test run, without the system, using the test key (supplied on request).Among the different variants, you can choose the built-in button, with safety glass, withLED.
MODEL PA
VARIANT AND ACCESSORIES:BI - Base for built-in mountingCR – Release KeyCT – TEST KeyKS – Sealing KitVP – Safety glass
26
ELECTROMAGNETIC LOCKS
TYPE A B C D E F
PAxx_xxx 98 98 48 50 45° Ø 6
MODEL PA
DIMENSIONS mm
TECHNICAL DETAILS
Model Power supply Rated current Room temperature IP Grade HumidityVdc mA °C IP %
PAxx_xxx 9-28 < 100 -10 +70 40 95
Rest position
Alarmm ON
Model Color Function Led Glass TypePAR1_000 red fire fighting no no APAR1_L00 red fire fighting yes no APAR1_V00 red fire fighting no yes APAR1_LV0 red fire fighting yes yes APAV1_V00 green emergency no yes BPAV1_LV0 green emergency yes yes BPAB1_V00 white emergency no yes BPAB1_LV0 white emergency yes yes BPAG1_V00 yellow start ON no yes BPAG1_LV0 yellow start ON yes yes BPAU1_V00 blue stop OFF no yes BPAU1_LV0 blue stop OFF yes yes B
27
ELECTROMAGNETIC LOCKS
28
NOTE
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
S1-S13Electromagnet free wires
Pag. 32
S2Electromagnet wall mounting50-100 kg
Pag. 34
S3Electromagnet wall or floormounting 50-100 kg
Pag. 36
S5Electromagnet 150kg Coil incorporated in the resin
Pag. 38
S59Electromagnet 150kg completelyincorporated in the resin
Pag. 40
S6 Electromagnet wall mounting 50kg
Pag. 42
EXMElectromagnet explosion proof
Pag. 44
S01Adjustable keeper plate
Pag. 46
S02 – SH2Fixed Keeper plate
Pag. 48
S00Galvanized disk
Pag. 48
S04Keeper plate for direct fixing
Pag. 50
S05Keepe plate in galvanized iron
Pag. 51
S03130Extension bracket for S2 models
Pag. 52
30050_061Additional extension tubo for S3 models
Pag. 54
S03Plate for S2 models
Pag. 55
INDEX
30
ELECTROMAGNETICFIRE DOOR HOLDERS
ELECTROMAGNETIC FIRE DOOR HOLDER
Wide range of electromagnetic fire door holders and their accessoriescertified according to (UE) 305/2011 (CPR) Regulation.
CE CERTIFICATE
31
Model S1, ideal for swing doors, where it is not required the release button, or for slidingdoors, with the fix keeper plate S02, S05 or SH2.The electrical connection is made directly on the free wires (L = 70mm) of the coil, or onthe terminal for S13 models. The fixing base of the magnet is made of robust plasticmaterial for models from 50 Kg and 100 Kg, while for model of 150 Kg, or model S1311x,it’s made of galvanized steel. Standard power supply 24Vdc.
VARIANTS AND ACCESSORIES: Holding force 50 Kg, 100 Kg or 150 Kg Electrical terminal connection (= model S13) Different supply voltage Different lenght wires
MODEL S1
Keeper plate S01Pag. 46
Keeper plate S02 – SH2Pag. 48
Keeper plate S05Pag. 51
S13110
32
ELECTROMAGNETICFIRE DOOR HOLDERS
TYPE A B C D E F G
S1x06x 68 68 30 50 52 52 Ø 6
S1x11x 68 68 40 60 52 52 Ø 6
S1x16x 75 75 40 70 60 60 Ø 6
MODEL S1
DIMENSIONS mm
Model Keeper plate Holding force Powe supply Rated current Protection Terminalincluded Kg Vdc mA circuit
S10060_01 S01060 50 24 60 no noS10051_01 S01060 50 12 120 no noS10052_01 S01060 50 48 30 no noS13050_02 S02060 50 24 60 no yesS13051_02 S02060 50 12 120 no yesS13052_02 S02060 50 48 30 no yesS10110_01 S01110 100 24 100 no noS10111_01 S01110 100 12 200 no noS10112_01 S01110 100 48 50 no noS13110_05 S05110 100 24 100 no yesS13111_05 S05110 100 12 200 no yesS13112_05 S05110 100 48 50 no yesS10160_02 S02160 150 24 100 no noS10161_02 S02160 150 12 200 no noS10162_02 S01160 150 48 50 no noS10160_H2 SH2160 150 24 100 no noS10161_H2 SH2160 150 12 200 no noS10162_H2 SH1160 150 48 50 no no
Keeper plate S01060, S02060, S01110 are available only BLACK typeKeeper plate S05110 in galvanized steel base
33
ELECTROMAGNETICFIRE DOOR HOLDERS
Model S2, generally supplied with adjustable keeper plate S01, a release button and aprotection circuit, standard power supply 24Vdc. Power supply wires can enter from downor from the sides via special tear-off tabs. The base for the fixing of the magnet (black) isin robust plastic material and the cover is in ABS.The product is light and strong thanks to the careful selection of materials. The compactdesign makes the S2 model particularly pleasant even in installations where the aestheticis important.
VARIANT AND ACCESSORIES: Holding force 50 or 100 Kg Door status sensore (reed, only 50 Kg = item S29050) Different supply voltage AC power
Keeper plate S01Pag. 46
Extension bracket S03130Pag. 52
Bracket S03Pag. 55
MODEL S2
34
ELECTROMAGNETICFIRE DOOR HOLDERS
TYPE A B C D E F G I
S2x05x 72 105 40 50 52 52 6,5x12 16x22
S2x11x 72 105 52 60 52 52 6,5x12 16x22
MODEL S2
DIMENSIONS mm I = hole for power supply wires
Model Keeper plate Holding force Power supply Rated current Protection Doorincluded Kg Vdc mA circuit status
S20050_01 S01060 50 24 60 yes noS20051_01 S01060 50 12 120 yes noS20052_01 S01060 50 48 30 yes noS21050_01 S01060 50 24 60 no noS21051_01 S01060 50 12 120 no noS21052_01 S01060 50 48 30 no noS29050_01 S01060 50 24 60 yes yesS29051_01 S01060 50 12 120 yes yesS29052_01 S01060 50 48 30 yes yesS20110_01 S01110 100 24 100 yes noS20111_01 S01110 100 12 200 yes noS20112_01 S01110 100 48 50 yes noS21110_01 S01110 100 24 100 no noS21111_01 S01110 100 12 200 no noS21112_01 S01110 100 48 50 no no
WHITE cover (standard) or BLACKBLACK keeper plate (standard) or WHITEHow to order – code example:White cover + black keeper plate = S20050_01White cover + white keeper plate = S20050B01Black cover + black keeper plate = S20050N01
35
ELECTROMAGNETICFIRE DOOR HOLDERS
Model S3 is generally supplied with adjustable keeper plate S01, a release button and aprotection circuit, standard power supply 24Vdc. Power supply wires can enter from downor from the sides via special tear-off tabs. The cover provided can perfectly mask thefixing screws and the connection wires, so that the product results aestetically morepleasant. Height and lenght can be modified as preferred with the optional tube.You can join two or more tubes together to get the necessary lenght.Model S3 has been realized for floor/ceiling or wall mounting; it can be orientedhorizontally or vertically with an easy and fast operation. Standard power supply 24Vdc.
VARIANTS AND ACCESSORIES: Holding force 50 Kg or 100 kg Extension tube (code 30050_061) Different supply voltage AC power
Keeper plate S01Pag. 46
Extension tube 30050_061Pag. 54
MODEL S3
36
ELECTROMAGNETICFIRE DOOR HOLDERS
MODEL S3
DIMENSIONS mm I = hole for power supply wires
Model Keeper plate Holding force Power supply Rated current Protection Doorincluded Kg Vdc mA circuit status
S30060_01 S01060 50 24 60 yes noS30061_01 S01060 50 12 120 yes noS30062_01 S01060 50 48 30 yes noS31060_01 S01060 50 24 60 no noS31061_01 S01060 50 12 120 no noS31062_01 S01060 50 48 30 no noS30110_01 S01110 100 24 100 yes noS30111_01 S01110 100 12 200 yes noS30112_01 S01110 100 48 50 yes noS31110_01 S01110 100 24 100 no noS31111_01 S01110 100 12 200 no noS31112_01 S01110 100 48 50 no no
Available only BLACK.Extension tube available: item 30050_061
TYPE A B C D E F G H I L
S3x06x 10 105 122 50 80 80 6,5x12 185 20 150-165
S3x11x 105+5 105 122 60 80 80 6,5x12 196 20 150-165
30050_061 100
37
ELECTROMAGNETICFIRE DOOR HOLDERS
Model S5, generally supplied with fix keeper plate (S02160 or SH2160), without releasebutton, standard power supply 24Vdc. The electrical connection is made through aconnector with strain relief and a protection circuit. The base to fix the electromagnet ismade of galvanized steel.The main features of this model are the coil incorporated in the resin and the connectorwith a high connection value (IP67). These solutions make the electromagnet particularlyresistant to moisture and water jets.
VARIANTS AND ACCESSORIES: Model S59 Different supply voltage AC power supply
Keeper plate S02 - SH2Pag. 48
MODEL S5
38
ELECTROMAGNETICFIRE DOOR HOLDERS
MODEL S5
DIMENSIONS mm I = hole for power supply wires
TYPE A B C D E F G I
S5016x 75 115 43 70 60 60 Ø 6 PG11
Model Keeper plate Holding force Power suppply * Rated current Protection Doorincluded Kg Vdc mA circuit status
S50160_02 S02160 150 24 100 yes noS50161_02 S02160 150 12 200 yes noS50162_02 S02160 150 48 50 yes noS50160_H2 SH2160 150 24 100 yes noS50161_H2 SH2160 150 12 200 yes noS50162_H2 SH2160 150 48 50 yes no
* On request 230Vdc and 230Vac.
39
ELECTROMAGNETICFIRE DOOR HOLDERS
Model S59, generally supplied with fix keeper plate (S02160 o SH2160), without releasebutton, standard power supply 24Vdc. The electrical connection is made through aconnector with strain relief and a protection circuit. The base to fix the electromagnet ismade of galvanized steel.Almost of the metallic surfaces are incorported in the resin; this makes it extremelyresistant to weathering limiting the oxidation surfaces.Furthermore, in addition, the connector for electrical connections has an high level ofprotection (IP67). These solutions make the electromagnet particularly resistant toumidity and water jet.
VARIANTS AND ACCESSORIES: Model S5 Different supply voltage AC power supply
Keeper plate S02 - SH2Pag. 48
MODEL S59
40
ELECTROMAGNETICFIRE DOOR HOLDERS
MODEL S59
DIMENSIONS mm I = hole for power supply wires
TYPE A B C D E F G I
S5916x 108 144 60 70 60 60 Ø 6 PG11
Model Keeper plate Holding force Power suppply * Rated current Protection Doorincluded Kg Vdc mA circuit status
S59160_02 S02160 150 24 100 yes noS59161_02 S02160 150 12 200 yes noS59162_02 S02160 150 48 50 yes noS59160_H2 SH2160 150 24 100 yes noS59161_H2 SH2160 150 12 200 yes noS59162_H2 SH2160 150 48 50 yes no
* On request 230Vdc and 230Vac.
41
ELECTROMAGNETICFIRE DOOR HOLDERS
Model S6, is generally supplied with adjustable keeper plate S01060, a release button anda protection circuit, standard power supply 24Vdc.Power supply wires are connected to a terminal connection and can enter from down offrom the sides via special tear-off tabs.The base for the fixing of the magnet is made of robust plastic material, while the cover isin ABS.
VARIANTS AND ACCESSORIES: Different supply voltage AC power
Keeper plate S01Pag. 46
MODEL S6
42
ELECTROMAGNETICFIRE DOOR HOLDERS
TYPE A B C D E F G
S6006x 68 84 30 50 52 52 Ø 6
MODEL S6
DIMENSIONS mm
Model Keeper plate Holding force Power suppply Rated current Protection Doorincluded Kg Vdc mA circuit status
S60060_01 S01060 50 24 60 yes noS60061_01 S01060 50 12 120 yes noS60062_01 S01060 50 48 30 yes no
Available WHITE cover and BLACK base
43
ELECTROMAGNETICFIRE DOOR HOLDERS
EXM model, explosion proof electromagnetic door holder, certified according to ATEXregulations for hazardous zones 1, 2, 21, 22.To release the keeper plate you will turn off the power.The nominal holding force is guaranteed using the keeper plate GH model.It is possible to hold different metallic objects than GH keeper plate by checking theholding power.The elctromagnets are certified in accordance with protection class II T6 II2G ml Ex 1, 2(gas, mist and vapor). Ex II 2 D Td A21 IP65 T80 ° C, to be used in zone 21, 22 (polveri).Operating voltage 24Vdc Standard.
VARIANTS AND ACCESSORIES: Holding force 65 Kg, 130 Kg o 200 Kg Standard cable 1m (5m on request)
Keeper plate GHPag. 45
MODEL EXM
44
ELECTROMAGNETICFIRE DOOR HOLDERS
TYPE A B C D E F G H I K L M
EXM-650 113 66 52 54 42 Ø 54 38 60 44 50 Ø 56 Ø 6,3
EXM-1300 138 86 70 64 58 Ø 81 45 80 60 62 Ø 86 Ø 8,0
EXM-2000 45 80 60 62 45 Ø 81 45 80 60 62 Ø 86 Ø 8,0
MODEL EXM
DIMENSIONS mm
ACCESSORIESGH6 Keeper plate for EXM-650GH 13/20 Keeper plate for EXM-1300, EXM-2000EXBOX-3P Terminal box ATEX II2GD EX eEXC-K4/5 Terminal box with integral fuse ATEX II2GD EX eEXC-T1 Push button for manual release II2G EX d
Model Keeper plate Holding force Power supply Rated current Cable Doorincluded Kg Vdc mA m status
EXM-650 GH-6 65 24 45 1 noEXM-650-5 GH-6 65 24 45 5 noEXM-1300 GH-13/20 130 24 65 1 noEXM-1300-5 GH-13/20 130 24 65 5 noEXM-2000 GH-13/20 200 24 160 1 noEXM-2000-5 GH-13/20 200 24 160 5 no
Keeper plate GH
45
ELECTROMAGNETICFIRE DOOR HOLDERS
Adjustable keeper plate S01 is generally supplied with most of the electromagnets of 50Kgs and 100 Kgs, while for 150 Kgs models only on specific request.In order to grant an higher contact surface, the diameter of the disc is 5mm larger thanthe electromagnet to which it is linked.The keeper plate can be oriented of 60° with respect to its base.The steel disc is mounted on a special shock absorber which reduces the impact due tothe door opening.The shock absorber elasticity allows a perfect coupling of the disc to the magnet.
MODEL S01
46
ELECTROMAGNETICFIRE DOOR HOLDERS
TYPE A B C D E F G
S01060 65 65 46 55 50 50 Ø 6
S01110 65 65 47 65 50 50 Ø 6
S01160 65 65 50 75 50 50 Ø 6
MODEL S01
DIMENSIONS mm
47
ELECTROMAGNETICFIRE DOOR HOLDERS
S02160 SH2160
Keeper plate S02 is composed of a steel disc and a plate with four holes for the fixing.The disc is amortized, with respect to the plate, thanks to the elastic material interposedbetween the two elements.
Keeper plate S00 is exclusively composed of a steel disc designed to be connected to themagnetic surface of the electromagnet. It is fixed through a threaded blind hole.
MODEL S00
S02060 S02110
MODEL S02 - SH2
48
ELECTROMAGNETICFIRE DOOR HOLDERS
TIPO A B C D E F G
S02060 1 65 65 20 55 52 52 Ø 6
S02110 1 65 65 23 65 52 52 Ø 6
S02160 2 75 75 20 75 70 70 Ø 6
SH2160 2 75 75 37 75 70 70 Ø 6
MODEL S02 - SH2
DIMENSIONS mm
TYPE C D G
S00060 7 55 M5
S00110 8 65 M5
S00160 10 75 M6
1 = plastic base2= iron base
MODEL S00
DIMENSIONS mm
49
ELECTROMAGNETICFIRE DOOR HOLDERS
Keeper plate S04 is composed of an amortized steel disc and of a threaded screw. Forfastening you should make a M6 threaded hole directly on the door.The keeper plate S04 is available for Sxx160 models.
DIMENSIONS mm
TYPE A B C D E F
S04160 26 35 36 75 18 M 6
MODEL S04
50
ELECTROMAGNETICFIRE DOOR HOLDERS
Keeper plate S05 is recommended for installation on sliding doors. It is composed of adisc and a steel plate with four holes for fixing. The disc is amortized, with respect to theplate, by a robust set of springs. These springs have the capacity to absorb blows ofconsiderable intensity.On the bottom of the plate, the head of the central screw is subject to a movement ofabout 6mm. This means that keeper plate S05 must be fixed on a surface with a centralhole suitable for the movement of the screw itself.
DIMENSIONS mm
TYPE A B C * D E F G
S05110 65 65 20 65 55 55 Ø 5,5
* It decreases up to 14mm with compressed spring
MODEL S05
spring
51
ELECTROMAGNETICFIRE DOOR HOLDERS
Extension bracket S03130 for Electromagnetic Fire Door Holders S2 models.It is particularly versatile and useful when the electromagnet, wall mounted, is too farfrom the door to hold.S03130 extension bracket allows to distance the electromagnet from the wall from 45 to130 mm.Adding the extension tube (item 30050_061 to be ordered separately) is possible to reacha length of 230mm. To obtain intermediate measures it can be shortened buy cutting thetube to the required size.S03130 extension bracket is certified UNI EN 1155 for all S2 electromagnets, 50 and 100kgs of holding force. (S2x05x e S2x11x)
MODEL S03130
52
ELECTROMAGNETICFIRE DOOR HOLDERS
TYPE A B C D E F G L e f
S03130 105 105 130 20 80 80 6,5x12 100 50 50
30050_061 230 20 100
MODEL S03130
DIMENSIONS mm
S03130 + S2
Model S2Pag. 34
Extension tube 30050_061Pag. 54
53
ELECTROMAGNETICFIRE DOOR HOLDERS
Model 30050_061 is an additional extension for all S3 models and allows an elongation of100mm. It is also used as an extension on S03130 bracket.
The installation is easy and quick at any time, even when the electromagnet is alreadyinstalled.To obtain intermediate measures it can be shortened buy cutting the tube to the requiredsize.
Model S3Pag. 36
Model S03130Pag. 52
MODEL 30050_061
54
ELECTROMAGNETICFIRE DOOR HOLDERS
Varnished steel plate for floor mounting of Electromagnetic fire door holders S2 models
VARIANTS: S03000_N black S03000_W white
A 72
B 48
C 135
D Ø 10
E 60
F 32
G Ø 6
DIMENSIONS mm
MODEL S03
55
ELECTROMAGNETICFIRE DOOR HOLDERS
56
NOTE
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
TOOptical acoustic panel
Pag. 60
PAManual call point
Pag. 62
SRIndoor/outdoor siren
Pag. 64
RFSmoke detector
Pag. 65
BPRechargeable batteries
Pag. 66
FAPFire Alarm Panel one zone
Pag. 68
INDEX
58
FIRE ALARM PANELSAND ACCESORIES
Ligth and strong ABS item, with polycarbonate front .It is supplied with a film with the messagge «FIRE ALARM».Various interchargeable films are available with different messages.
CE certified optical panel EN54-3 TO_000Fire alarm sound device.Activation command at polarity inversion.Lighting high brightness LED, programmable sound, piezo electric transducer. Power supply 10-28Vdc.
CE certified optical panel EN54-3 + EN54-23 TO_023Fire alarm optical and sound device.Activation command at polarity inversion.Lighting message FIRE ALARM with red LED high brightness, synchronizable with otherpanels of the same family.Optical device certified with high efficiency LEDs.Programmable sound, piezo electric transducer. Power supply 24-28Vdc.
AVAILABLE WRITTEN TYPES:NO ENTRY OFF FIRE IN PROGRESSEVACUATE THE LOCAL OFF FIRE IN PROGRESSGAS ALARMEVACUATION ALARMOFF FIRE IN PROGRESSEVACUATE THE LOCALFIRE
MODEL TO
TO_000
TO_023
60
FIRE ALARM PANELSAND ACCESORIES
MODEL A B C
TO_000 320 140 68
TO_023 320 140 68
MODEL TO
DIMENSIONS mm
Technical data TO_000 TO_023
Power supply 10,8 ÷ 28 Vdc 24 ÷ 28 VdcAbsorbtion 0,11 A 0,23 APower 2,64 W @ 24Vdc 5,52 W @ 24VdcFrequency Programmable ProgrammableSound pressure 87dB @ 1m 87dB @ 1mAcoustic transducer Piezo PiezoFlash type High luminosity LED High luminosity LEDIP Index IP 21C IP 21COperating temperature -25°C a +55°C -25°C a +55°CColor RAL 9010 RAL 9010Weight 0,45 Kg 0,45 Kg
61
FIRE ALARM PANELSAND ACCESORIES
Manual call point PA (PAR1 certified EN54-11) is used on conventional alarm systems.The alarm is activated manually and is done by pressing the part marked by an universalnormalized serigraphy.The appearance of yellow plastic plate shows the correct alarm signal activation.After the manual operation is possible to restore the button with an easy operation byusing the provided key (CR).It is possible to perform an operational test, without intervention on the alarm system,using the key test (supplied on request).Among the different variants, it is possible to choose the built-in button, with protectionglass and LED.It is supplied with IP40 protection index and is available in the following colors: red,green, yellow, white and blue.
ACCESSORIES:BI – Built in baseCR – Release keyCT - Key TESTKS – Sealant KitVP – Protection glass
MODEL PA
62
FIRE ALARM PANELSAND ACCESORIES
MODEL A B C D E F
PAxx_xxx 98 98 48 50 45° Ø 6
MODEL PA
DIMENSIONS mm
Technical data
Model Power supply Rated current Operating temperature IP index UmidityVdc mA °C IP %
PAxx_xxx 9-28 < 100 -10 +70 40 95
Rest position
Alarm ON
Model Color Function Led Glass TypePAR1_000 red fire fighting no no APAR1_L00 red fire fighting yes no APAR1_V00 red fire fighting no yes APAR1_LV0 red fire fighting yes yes APAV1_V00 green emergency no yes BPAV1_LV0 green emergency yes yes BPAB1_V00 white emergency no yes BPAB1_LV0 white emergency yes yes BPAG1_V00 yellow extinguish ON no yes BPAG1_LV0 yellow extinguish ON yes yes BPAU1_V00 blue extinguish OFF no yes BPAU1_LV0 blue extinquish OFF yes yes B
63
FIRE ALARM PANELSAND ACCESORIES
Outdoor siren self-powered, CE certified EN54-3.Activation command at polarity inversion, scheduling sound modulations and flash.Ligth and strong red ABS item.
Technical data SR_001 SR_000
Power supply 9-28 Vdc 24 VdcMax rated current 32 mA 350 mAModulations types Fast Fast
Slow SlowFixed FixedImpulsive Impulsive
Frequency Programmable ProgrammableSound pressure 92-112 dB (A) 100 dB (A)Flashing - LED high luminosityFlash firing - Quick flash
- Alternating flash deniedFlash scheduling - YesIP index IP 54 IP 33Operating temperature -25°C a +70°C -25°C a +70°CColor RAL 3000 RAL 3000Dimensions D.93 x H.63 mm 240x283x82 mmWeight 0,17 Kg 1,70 Kg
SR_000
SR_001
MODEL SR
64
FIRE ALARM PANELSAND ACCESORIES
Combined smoke/heat detector (temperature rise) according to EN54-5/7.Supplied with quick coupling base, suitable for installation in any conventional fire alarmsystem.It is the right choiche for applications in which is required a quick a reliable diagnosis in fire alarm situation.
Technical data RF_000
Power supply 9-30 VdcAbsorption inactive < 50 µAAbsorption inactive in alarm 20 mAClass (according to EN54-5/7) A1RProtected area (according to EN54-5/7) 120m2
Installation height (accordin to EN54-5/7) max 16mOutput in alarm position max 20mA / -3,3VIP Index IP 30Operating temperature -10°C a +60°CRelative umidity 93% @ 40°C
Dimensions (base included) ø 102 x 48 mm
Weight 170gr
MODEL RF
65
FIRE ALARM PANELSAND ACCESORIES
Lead acid rechargeable batteries, maintenance free, with fast-on terminals.Ideal for all fire alarm system and their accessories.
Model Power supply Capacity Fast-on Dimensions WeightVdc Ah (mm) (mm) Kg
BP06_120 6 12,0 4,8 151x50x99 1,80BP12_012 12 1,2 4,8 97x48x57 0,55BP12_020 12 2,0 4,8 178x35x65 0,80BP12_072 12 7,2 4,8 151x65x101 2,30
MODEL BP
66
FIRE ALARM PANELSAND ACCESORIES
Fire Alarm Panel, one zone, FAP1 (certified EN54-2 / EN54-4) is ideal to protect againstthe risk of fire small sites, thanks to its easy of use and installation.The use of appropriate smoke/heat detectors (EN54-5 / EN54-7), manual call points(EN54-11), sirens (EN54-3), optical/acoustic panels (EN54-3 / EN54-23) andelectromagnetic fire door holders (EN1155), make it a valid safety control system againstthe fire.The FAP1 provides safety 24 hours on 24, thanks to dual power, from electricitydistribution network and rechargeable battery installed inside.The electronics control support the normal maintenance management and themantaining of the efficiency of the system.Specific signals, issued by the panel, are programmable, in case of anomalies andinefficient state of the batteries.
MODEL FAP1
68
FIRE ALARM PANELSAND ACCESORIES
MODEL FAP1
TECHNICAL DATA
69
FIRE ALARM PANELSAND ACCESORIES
EXCLUSIVELY DISTRIBUTED IN ITALY BY ELFRI
NOTE
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………
70
Condizioni generali di vendita su www.elfri.com
GENERAL CATALOGUE
Edition 2016-1
ELFRI SRLVia Friuli, 9 Z.I. 33050 Gonars (UD) – Italy Tel. +39.0432.931425 Fax +39.0432.931161e.mail: [email protected] [email protected] www.elfri.com
AUTHORIZED DISTRIBUTOR