23
Presentation

Presentazione Ppef Pogliano Busbar-Eng

Embed Size (px)

Citation preview

  • Presentation

  • Pogliano Pogliano BBususBBarar s.r.l.s.r.l.

    a modern solution for power feeding

    and distribution

  • Blindosbarra Pogliano

    The philosophy behind busbar

    Tap-off outlets are distributed along the run.

    Cable

    A specific cable for each load

    Power tap-off by connection boxes

    Power distribution by cable trays

    Power is distributed by means of self-supporting and modular standard lenghts.

    Power is easily tapped-off by means of tap-off plugs

  • Components and terminologyComponents and terminology

  • PoPower feeding by cachewer feeding by cacheDisadvantages of cable vs. busbar

    Installation time

    twice as long as

    with busbars

    Installation requires

    a mechanical

    support on which

    cables are installed.

    The handling of

    cables is difficult ,

    especially if the

    space is narrow.

    Heavy weight

    requires multiple

    fixing.

    Cables take up

    more space

    Cable bending

    requires high

    radiuses in crowded

    spaces.

    Wear and tear of

    insulators in time

    PCV deteriorates

  • In case of fault the transformer can be disconnected within an hour.

    Easy connection

    to transformer

    Feeding power by Feeding power by busbarbusbar trunkingtrunkingAdvantage of busbar links vs. cable

    Installation can be completed in just one step.

    Easier than cable

    A single duct can substitute many cables in parallel. Busbar trunkingallows for 90 bends, and makes for optimal usage of space

    Less space

    Busbar trunking is 40 % lighter than cable.

    Reduction of fixing points

    Poglianos busbar systems are almost forever!

    Durability of

    components

  • Power distribution by cablePower distribution by cableDisadvantages of a centralized cable system

    Each load draws

    power individually

    from the switchboard

    All cables must be

    supported

    mechanically along

    their length

    Installation time: twice as long as with busbartrunking

    When a load is

    moved or a new load

    inserted, it must be

    cabled again

    Hard to modify

    During load

    maintenance power

    must be turned off

    since protection is

    inside the

    switchboard

    Downtime

    High magnetic fields

    Components generated by each

    phase are not balanced or screened

    A centralized cable system is complex

  • Power distribution by Power distribution by busbarbusbarAdvantages of decentralized distribution by

    busbar trunking

    Distributing power by busbar means smaller switchboards!

    Less space

    Just one installation step

    Installation time cut in half

    The layout is simple and it is not necessary to know the final layout of the loads

    Easy layout

    More flexible and less More flexible and less

    expensive than cableexpensive than cable

    Magnetic fields

    greatly reduced

    When distributing power in places like offices or hospitals, busbar trunkingminimizes magnetic fields and their risks

    Lower fire loads Fewer plastic insulators

  • Power distribution by Power distribution by busbarbusbar trunktrunkingingAdvantages of decentralized distribution by

    busbar trunking

    Runs can be modified, moved or removed when the need arises

    Modularity

    Very easy to

    modify.No downtime

    Protection devices can be inserted in the tap-off plugs, which means that no need to turn off the power during load maintenance.

    - Layout is easy- Technical data and parameters are clearfrom the beginning.

    Easy to layout

    MaggioreMaggiore flessibilitflessibilit

    ed economicit del ed economicit del

    cavocavo

    Busbar Busbar trunkingtrunking is is

    more flexible, more flexible, safe and safe and

    less expensiveless expensive

    Loads can be moved easily without any need to modify the system.

  • Cable distribution Cable distribution for lightingfor lightingDisadvantages of cable vs. busbar trunking

    1. Installation of

    cable trays

    2. Installation of

    cables and of

    lighting equipment

    Installation time.Adding or removing

    more lamps is

    difficult or

    impossible once

    completed

    Difficult to modify

    Maintenance of loads

    may require that the

    whole system be

    switched off

    Downtime

    0,5 hoursper meter for the run

    0,5 hoursper lighting device

  • Lighting distribution by Lighting distribution by busbarbusbarAdvantages of busbar trunking

    0,2 hoursper meter to install the busbar trunking

    0,2 hoursper lamp for

    suspension and electrical connection

    Busbar trunking can be assembled just as fast as cable trays, but the lamps can be prepared on the ground and assembled together with the busbar trunking

    Installation time cut in half

    Any maintenance

    only involves one

    lighting load, which

    means power doesnt

    need to be turned off

    No downtime

    Lamps can be

    removed or added

    very quickly

    Very easy to

    modify

    By modifying the

    cabling of the plug

    you change the

    phase from which

    you draw power

    Easy to modify the circuit

    More competitive

    than cable tray+cable

  • For power distribution to small/medium loads

    BJ and MB for loads up to 160 A

    Ideal for connection between transformer and switchboard or between switchboards

    BX and BV for transformer /switchboard links up to 5000 A and beyond

    Ideal to feed power to BS, BJ and BL or to rising mains

    BX and BV for distribution of up to 5000 A and beyond

    Suitable for electrical power distribution, to feed whether lower rated current distribution runs or machines

    BS for distribution up to 1000 A

    Pogliano BusBarPogliano BusBar product ranproduct rangege

  • PogliaPogliano BusBarno BusBar product rangeproduct range

    Ideal for lighting

    BL and BLP for lighting up to 40 A

    Ideal for cranes

    BT for mobile loads up to 300 A

  • Pogliano BusBarPogliano BusBar trunkingtrunkingAdvantages Advantages to to electrical consultants

    - The design is easier and faster- Design possible even without knowing the exact destination of loads.Knowing total loads and the characteristics of the installation is sufficient

    Easy to design

    - It complies to all existing standards.- Safely designed.- Reliable.

    Technical warranty:

    For distribution, feeding or for lighting

    More competitive than cable.

  • Pogliano BusBarPogliano BusBar trunkingtrunkingAdvantages to Advantages to installersinstallers

    Modular design satisfies customer needs

    It satisfies customer needs

    Fast delivery times allow for lower stock and quick replacement

    Lower stock.

    Speed of installation means delivering the job a lot faster

    Good for business

    Weeks

  • Pogliano BusBarPogliano BusBar trunkingtrunkingAdvantages to Advantages to end customers

    Time to deliver the job cut in half

    Speed of

    installation.

    Low magnetic fields (much lower than with cable). Low emissions even in case of fire.

    Safe buildings

    Modularity makes it possible to re-configure the layout after installation.

    Adaptability

    Protection devices contained in tap-off plugs make it possible to single out maintenance operation without turning off the general power

    No downtime

    No maintenance

    Once installed they dont require any maintenance other than common sense (and tightening of joints in case of BX)

  • PoglianoPogliano BusBarBusBar serviservicece

  • TTradiradittion and innovationion and innovation

    No systems go out of productionNo systems go out of production

    Reliability over time is the best warranty Reliability over time is the best warranty

    (since 1943)(since 1943)

  • Product serviceProduct service

    We can adapt to any preWe can adapt to any pre--existing existing

    situationsituation

    We provide solutions for nonWe provide solutions for non--standard standard

    connections to switchboards connections to switchboards

  • Technical service Technical service -- timingtiming

    Technical questions are answered within Technical questions are answered within 1 day1 day

    if they can be solved by phoneif they can be solved by phone

    We can have a drawing ready within We can have a drawing ready within 1 week1 week

    1+1 formula1+1 formula

  • Technical serviceTechnical service

    We We can be of service in case of special projects.can be of service in case of special projects.

    Technical service on international standards.Technical service on international standards.

    Our company has installed electrical products for Our company has installed electrical products for

    more than 80 years.more than 80 years.

    We can be of service to any installer.We can be of service to any installer.

    We monitor the electrical worldWe monitor the electrical world

  • Technical Technical serviceservice

    InsInstallation coursestallation courses

    Installers can be certified for our productsInstallers can be certified for our products

    The futureThe future

  • Thank you for your attention!

    Pogliano BusBar s.r.l.

    Corso Canonico Allamano, 43

    10095 Grugliasco (TO)

    Tel. 011 4016611

    Fax 011 4016652

    www.blindosbarra.com

    [email protected]