Upload
tyree-kittredge
View
243
Download
6
Tags:
Embed Size (px)
Citation preview
PRESENTATION PRESENTATION OFOF
BUSMI PROFILESBUSMI PROFILES
PRESENTATION PRESENTATION OFOF
BUSMI PROFILESBUSMI PROFILES
www.busmi.comwww.busmi.com
© 2005 BY-PROFIL
ProfilesProfilesBU-GroupBU-
Group BarsBarsCost
comp-arison
Costcomp-arison
Appli-cationsAppli-
cationsCompany
dataCompany
dataPoten-tials
Poten-tials
BYPStrategy
BYPStrategy
Advantages of profile
application
Advantages of profile
applicationConti-
rolling lineConti-
rolling line
www.bohler-profil.comwww.bohler-profil.com
We produce special section profiles and shaped bar profiles in cold drawn and hot rolled condition tailor-made to our customer‘s applications.
We are able to offer our products to the closest tolerances and in customized batches.
© 2005 BY-PROFIL
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
© 2005 BY-PROFIL
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
We can produce special sections and shaped bars in any formable material including tool steels, high speed steels, stainless steels, and special materials.
Our products are available in all steel grades, from unalloyed constructional steels up to the highest alloyed steels including nickel-based alloys and titanium.
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
With high alloyed steel, it is profitable to use a profile even if there is only a small loss on the cross-section.
When the machining of the bar accounts for a big loss of the cross-section.
high
high
low
Ste
el
gra
de
% waste of cross- section
© 2005 BY-PROFIL
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
Substitution of Bars with ProfilesSubstitution of Bars with Profiles
Keep in mind...
When does one substitute bars with profiles?
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
Production out of PROFILEPROFILE
Example:
Length per piece: 39.4 inches (1 m)
Production out of BARBAR
Starting material: special section no. 2944 Starting material: Flat 2“ x 1“Cross section: 0.85 squ. in Cross section: 2.00 squ. in.
Weight per ft: 3.0 lb. Weight per ft: 7.3 lb.Price per lb: 0.91 $ Price per lb: 0.39 $Price per ft: 2.73 $ Price per ft: 2.85 $
Freight charges per ft: 0.05 $ Freight charges per ft: 0.12 $Machining cost per ft: 1.17 $ Machining cost per ft: 3.00 $Total cost per foot: 3.95 $ Total cost per foot: 5.97 $
SAVINGS PER FOOT: SAVINGS PER FOOT: 34 %!!!!34 %!!!!
© 2005 BY-PROFIL
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
PROFILES - SPECIAL SECTIONSPROFILES - SPECIAL SECTIONS
© 2005 BY-PROFIL
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
PROFILES – SHAPED BARSPROFILES – SHAPED BARS
© 2005 BY-PROFIL
hexagon
square round
flat tapered octagon
halfround triangle
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
10mm
0.39”
6mm
0.2”
2mm
0.08”
Shapes of bars:
© 2007 BY-PROFIL
max. 50mm
max. 1.97”
max. 120mm
max. 4.72”
Cross section area: 10 - 4000 mm² 0.016 - 6.2 in²
ProfileProfile Application areaApplication area ApplicationApplication Steel grade/Steel grade/BSBS
Special section for threading die and milling cutter bit
Tool manufacturing/Machine construction Milling head
S600/BM2S705/~BM35
Press brake toolMetal working
industry Press brake tool V310/708A47
Special section for disposable knive
Woodworking Wood chippingK329/
(chipper steel)
Guideway section Aviation Landing flapEN700/
AMS 5643
Section for ballthread nut
Car manufacturingPower steering
system E320/1.7321
Turbine plate Turbine constructionShotblasting
machineK100/~BD3
K107
Rocker arm section Car industry Racing car motorS600/BM2
S405
© 2005 BY-PROFIL
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
ProfileProfile Application areaApplication area ApplicationApplicationSteel grade/Steel grade/
BSBS
Hexagon
Section for window
Knife holderK329
W302/BH13
Energy industry Bolt and nutT262/1.4986T200/HR251
Woodworking industry Wood chipping
Steel construction Q038/1.0038Historicalbuilding
Rhombus-sectionTurbine
construction
Bottom part of turbineplates, which is fixedon the turbine shaft
T651/420S37T550/762
T552/~S151
Fastener rail tofix container Aviation industry Cargo plane N352/5S80
Bracing ribShip building
industryHull of mine
searching shipP501/1.3964
Reversible knife Woodworking industry Wood chippingK329/
(chipper steel)
© 2005 BY-PROFIL
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
These These areare our strong points . . . our strong points . . .
Production of profiles which are “made to measure“ toto reduce machining costs.
Steel grades from unalloyed constructional steels to the highest alloyed steelsincluding nickel-base alloys and titanium.
Quotation of customized batches (>500 kg).
Tolerances according to DIN resp. ASTM. We can achieve closer tolerances according to special requirements from the customer.
© 2005 BY-PROFIL
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP FAB
AnalysisFAB
Analysis ApplicationsApplications BYP Strategy
BYP Strategy
These These areare our strong points . . . our strong points . . .
© 2005 BY-PROFIL
Melting process:Melting process: conventional, ESR, PM and VIM/VAR.
Low tooling costsLow tooling costs for new profiles.
We have the possibility of strain hardeningstrain hardening by cold drawing:
• smaller tolerances• brighter surface• achievement of specific mechanical properties
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
© 2005 BY-PROFIL
In applications where high alloyed steels and/or complex shapes are in demand:
• Heat treatment know-howHeat treatment know-how of the whole steel range.
• Additional service: Additional service: sawing (shortlengths), milling, drilling.
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
These These areare our strong points . . . our strong points . . .
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
Limit of billet weight because of manual handling (max. weight of the bar: 100 kg).
© 2005 BY-PROFIL
Dimension area: - max. cross section: 157 inches²
These These areare our limits . . . our limits . . .
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
1
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
Machining costs moneyMachining costs money
Eliminate costs
Free up equipment for other jobs
SolutionSolution
PROFILESPROFILES
Unused material costs moneyUnused material costs money
Pay for what you use
BARSBARS
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
Advantages of BYP profiles to square and milling
better mechanical properties
better mechanical properties
© 2005 BY-PROFIL
more stress-relieved
better straightness
better tolerances over the bar
more stress relieved
no short grains, liquations remain in the center
cost advantage because of saving material and machining
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
Advantages of BYP profiles to extrusion
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
Optimization of Costs
© 2005 BY-PROFIL
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
BYP Strategy Going Forward...BYP Strategy Going Forward...
Medium and High Alloyed Steel Grades
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
DevelopmentSpecialities, Nickel – Based Alloys and Titanium
GrowthConti - Rolling Line
© 2005 BY-PROFIL
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
Conti – Rolling LineConti – Rolling Line
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
Hot Rolling LineHot Rolling Line
Production ProcessesProduction Processes
© 2005 BY-PROFIL
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
The continuous rolling line is at the heart of our shaping process for special sections.
This facility allows BÖHLER to shape round wire in all grades to the smallest dimensions and tighest tolerances.
CONTI - ROLLING LINECONTI - ROLLING LINE
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
© 2005 BY-PROFIL
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
CONTI - ROLLING LINECONTI - ROLLING LINE
The material passes through several cold work rolling/forming steps and a precise furnace.
Following shaping, the sections are formed into rod or bundles according to the customer‘s specifications.
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
Raw material: Rolled wire, 0.157 to 0.591 inch (4 to 15 mm) in diameter
Technical data
© 2005 BY-PROFIL
Section width: Special sections:0.315 to 1.181 inch (8 to 30 mm) maximum depending on the sectionFlat: 0.315 to 0.984 inch (8 to 25 mm) maximum
Section thickness: 0.039 to max. 0.394 inch (1 to max. 10 mm)for special sections0.039 to max. 0.197 inch (1 to max. 5 mm)for flat sections
Cross-section: min. 0.0155 to max. 0.155 square inch(mind. 10 bis max. 100 mm²)
Tolerances: Width: +/- 0.002 inch (0.050 mm)Thickness: +/- 0.001inch (0.025 mm)
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
CONTI - ROLLING LINECONTI - ROLLING LINE
© 2005 BY-PROFIL
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
Know-how and competence are required when hot rolled special sections are produced.
With the ability to achieve larger dimension profiles, our hot rolling mill rounds out our ability to satisfy our customers.
HOT ROLLING LINEHOT ROLLING LINE
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
Delivery Standard:
© 2005 BY-PROFIL
Hot rolled, cold drawn, shotblasted, pickled
Supply Length:
Tolerances:
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
Rolled, normalized, soft annealed, hardened/tempered or quenched, depending on the steel grade chosen
Surface Finish:
Depending on cross section, standard length approx. 10 to 20 feet, fixed length up to 20 feet on request
Closest tolerances according to national and international
standards or special requirements
Minimum Order: Quantities from 1,100 lbs, depending on required steel grade and special section
Technical data
HOT ROLLING LINEHOT ROLLING LINE
© 2005 BY-PROFIL
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
CONTI – ROLLING LINECONTI – ROLLING LINE/ HOT ROLLING LINEHOT ROLLING LINE
Depending on the degree of finishing required, facilities are available for:
• straightening
• the removal of burr
• edge grinding
• partial heat treatment
• labeling
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
Material / surface finish
Raw materialRaw materialRound wire in bundlesRound wire in bundles
© 2005 BY-PROFIL
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
Material / surface finish
Roller storeRoller store
© 2005 BY-PROFIL
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
Material / surface finish
Finished sectionsFinished sectionsRolled and wound into coilsRolled and wound into coils
with an outer with an outer ØØ of 78.74 inch of 78.74 inch (2000 mm)(2000 mm)
© 2005 BY-PROFIL
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
Quality assurance
(acc. to BS EN ISO 9001:2000)
from specimen preparation to microstructure examination
to optical measurement to microhardness testing
© 2005 BY-PROFIL
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
AVIATION
ring components in aircraft turbinesBÖHLER L718/L625 VMR, INCONEL 718/625
guideway section for the landing flapsBÖHLER N700 ESR, 1.4548, AISI 630
fastener rail in cargo planes for the fixation of containersBÖHLER N352 ESR, 1.4044, AISI 431
sealing section for the cargo compartment hatch17-4 PH, BÖHLER N700 ESR
turbine blade sectionsINCONEL Alloy 718 2.4668
© 2007 BY-PROFIL
Böhler N352 ESRBöhler N352 ESR1.4044 (AISI 431)1.4044 (AISI 431)
special profile hot rolled - 4230special profile hot rolled - 4230
Heat treatment: hardened and temperedSurface finish: sandblasted and pickledLength: fixed lengthEnd of bars: separated, deburredSurface finish class: B acc. to EN 10221
fastener rail infastener rail incargo planescargo planesfixation of containersfixation of containers
steel grade:steel grade:
Böhler L531Böhler L5313.71643.7164
special profile hot rolled – 8151BFspecial profile hot rolled – 8151BF
fastener rail infastener rail incargo planescargo planesfixation of containersfixation of containers
Heat treatment: hardened and temperedSurface finish: sandblasted and pickledLength: fixed lengthEnd of bars: separated, deburredSurface finish class: B acc. to EN 10221
steel grade:steel grade:
Böhler N700 ESRBöhler N700 ESR1.4542 (AISI 630)1.4542 (AISI 630)
special profile hot rolledspecial profile hot rolled
door sealdoor sealairlocksairlocks
Heat treatment: precipitation hardenedSurface finish: sandblasted and pickledLength: fixed lengthEnd of bars: separated, deburredSurface finish class: B acc. to EN 221
steel grade:steel grade:
absorberabsorber
vibration absorber invibration absorber inpropeller airplanespropeller airplanes
bend
folk
wedge
Böhler P802SABöhler P802SA1.3912 (Invar 36)1.3912 (Invar 36)
special profile hot rolled – bend 1special profile hot rolled – bend 1
vibration absorber invibration absorber inpropeller airplanespropeller airplanes
Product: special section, hot rolledHeat treatment: annealedSurface finish: sandblastedLength: random lenghtsEnd of bars: separatedSurface finish class: B acc. to EN 10221
steel grade:steel grade:
special profile hot rolled – bend 2special profile hot rolled – bend 2
BöhlerBöhlervibration absorber invibration absorber inpropeller airplanespropeller airplanes
Böhler P802SABöhler P802SA1.3912 (Invar 36)1.3912 (Invar 36)
Product: special section, hot rolledHeat treatment: annealedSurface finish: sandblastedLength: random lenghtsEnd of bars: separatedSurface finish class: B acc. to EN 10221
steel grade:steel grade:
special profile hot rolled - folkspecial profile hot rolled - folk
BöhlerBöhlervibration absorber invibration absorber inpropeller airplanespropeller airplanes
Böhler P802SABöhler P802SA1.3912 (Invar 36)1.3912 (Invar 36)
Product: special section, hot rolledHeat treatment: annealedSurface finish: sandblastedLength: random lenghtsEnd of bars: separatedSurface finish class: B acc. to EN 10221
steel grade:steel grade:
special profile hot rolled - wedgespecial profile hot rolled - wedge
BöhlerBöhlervibration absorber invibration absorber inpropeller airplanespropeller airplanes
Böhler P802SABöhler P802SA1.3912 (Invar 36)1.3912 (Invar 36)
Product: special section, hot rolledHeat treatment: annealedSurface finish: sandblastedLength: random lenghtsEnd of bars: separatedSurface finish class: B acc. to EN 10221
steel grade:steel grade:
Product: special profile, hot rolledHeat treatment: precipitation hardenedSurface finish: sandblasted and pickledLength: fixed lengthEnd of bars: sawnSurface finish class: B acc. to EN 10221
Böhler N700 ESRBöhler N700 ESR1.4542 (AISI 630)1.4542 (AISI 630)
special profile hot rolled - 3712special profile hot rolled - 3712
guideway sectionguideway sectionguide for landing-guide for landing-flapsflaps
steel grade:steel grade:
Energy
POWER GENERATION
gas turbine blades INCONEL Alloy 718, 2.4668 rotor wedge
BÖHLER A5001.4301, AISI 304
tension boltsBÖHLER P550, 1.3813BÖHLER P572, 1.3805
steam turbine bladesBÖHLER T550, 1.4923, BS762BÖHLER ET552, 1.4939, AMS 5719BÖHLER T651, 1.4021, AISI 420BÖHLER T200, 1.4980, AISI 660
© 2007 BY-PROFIL
Böhler T651Böhler T6511.4021 (AISI 420)1.4021 (AISI 420)Böhler T552 ESRBöhler T552 ESR1.49391.4939Böhler T550Böhler T5501.49801.4980
special profile hot rolled - 4328special profile hot rolled - 4328
rhombus sectionrhombus sectionturbine bucket for theturbine bucket for thecompressor of gas enginescompressor of gas engines
Product: special profile, hot rolledHeat treatment: hardened and temperedSurface finish: sandblasted and pickledLength: random lengthEnd of bars: separated, deburredSurface finish class: B acc. to EN 10221
steel grade:steel grade:
Böhler A500Böhler A5001.4301 (AISI 304)1.4301 (AISI 304)
special profile cold drawn - 1077special profile cold drawn - 1077
rotor wedge profilerotor wedge profilewinding end of the rotor inwinding end of the rotor inelectrical machineselectrical machines
Product: special profile, cold drawnHeat treatment: quenchedSurface finish: descaled, pickledLength: fixed lengthEnd of bars: separated, deburredSurface finish class: D acc. To EN 10221Production acc. to GE spec. B50A886 Rev. B
steel grade:steel grade:
WOODWORKING/BLADE/KNIFE
Granulatorknives,Recycling industryBÖHLER K110, 1.2379, AISI D2
Milling headknivesBÖHLER K105,1.2601, ~AISI D2BÖHLER S705pm,~ AISI M35, ~ AISI M41
© 2007 BY-PROFIL
Ring slicerparticle board K329, chipper, AISI A8 mod.
© 2007 BY-PROFIL
Saw millknifeK329, chipper, AISI A8 mod.
© 2007 BY-PROFIL
Pulp millknifeK329, chipper, AISI A8 mod.
© 2007 BY-PROFIL
Böhler K105Böhler K1051.2601 (AISI ~D2)1.2601 (AISI ~D2)
special profile hot rolled - 4185special profile hot rolled - 4185
L-shapeL-shapewood chippingwood chipping
Product: special profile, hot rolledHeat treatment: annealedSurface finish: sandblastedLength: fixed lengthsEnd of bars: separated, deburredSurface finish class: B acc. to EN 10221
steel grade:steel grade:
Böhler K105Böhler K1051.2601 (AISI ~D2)1.2601 (AISI ~D2)
special profile hot rolled - 4254special profile hot rolled - 4254
L-shapeL-shapewood chippingwood chipping
Product: special profile, hot rolledHeat treatment: annealedSurface finish: sandblastedLength: fixed lengthsEnd of bars: separated, deburredSurface finish class: B acc. to EN 10221
steel grade:steel grade:
Böhler K329SBBöhler K329SBChipperChipper
special profile hot rolled - 4454special profile hot rolled - 4454
Product: special profile, hot rolledHeat treatment: hardened and temperedSurface finish: sandblastedLength: fixed lengthsEnd of bars: separated, deburredSurface finish class: B acc. to EN 10221
steel grade:steel grade:
Böhler K329SBBöhler K329SBChipperChipper
special profile hot rolled - 4414special profile hot rolled - 4414
Product: special profile, hot rolledHeat treatment: hardened and temperedSurface finish: sandblastedLength: fixed lengthsEnd of bars: separated, deburredSurface finish class: B acc. to EN 10221
steel grade:steel grade:
bars for knee jointsTitanium Ti6AlV
© 2007 BY-PROFIL
special sectionsfor vanes in vane pumpsBÖHLER S601, ~AISI M2BÖHLER S404, ~AISI M50
© 2007 BY-PROFIL
turbine blade for sandblasting machinesBÖHLER K107, 1.2436, ~AISI D6
© 2007 BY-PROFIL
flat with groove for chain guide ways in the mining industryBÖHLER K700, 1.3401, Manganese
© 2007 BY-PROFIL
rocker arm section for racing car motorsBÖHLER S405, 1.2369, AISI M50
© 2007 BY-PROFIL
BÖHLER-UDDEHOLM BÖHLER-UDDEHOLM GROUPGROUP
Turnover 2004: $2.324 billion$2.324 billion
© 2005 BY-PROFIL
Employees: 12,04212,042
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
DIVISIONS OF THE BU-GROUPDIVISIONS OF THE BU-GROUP
100 sales companies in47 countries on all 5 continents.
100 sales companies in47 countries on all 5 continents.
BöhlerBleche GmbH.
BöhlerBleche GmbH.
Uddeholm Tooling ABUddeholm Tooling AB
BöhlerEdelstahl Gmbh.
BöhlerEdelstahl Gmbh.
Uddeholm FineMachined AB
Uddeholm FineMachined AB
Production-companiesProduction-companies
Production-companiesProduction-companies
Production-companiesProduction-companies
High PerformanceHigh PerformanceMetalsMetals
High PerformanceHigh PerformanceMetalsMetals
Special Special ForgingsForgingsSpecial Special
ForgingsForgingsWelding Welding
Consumables Consumables Welding Welding
Consumables Consumables PrecisionPrecision StripStripPrecisionPrecision StripStrip
© 2005 BY-PROFIL
BUSMI USABUSMI USABUSMI USABUSMI USA
Böhler-Ybbstal Profil GmbH.
Böhler-Ybbstal Profil GmbH.
Villares Metals S.A.
Villares Metals S.A.
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
DIVISIONS OF THE BU-GROUPDIVISIONS OF THE BU-GROUP
BYP offers a wide variety of materials made to your specifications
BYP offers a wide variety of materials made to your specifications
BöhlerBleche GmbH.
BöhlerBleche GmbH.
Uddeholm Tooling ABUddeholm Tooling AB
BöhlerEdelstahl Gmbh.
BöhlerEdelstahl Gmbh.
Uddeholm FineMachined AB
Uddeholm FineMachined AB
Production-companiesProduction-companies
Production-companiesProduction-companies
Production-companiesProduction-companies
High PerformanceHigh PerformanceMetalsMetals
High PerformanceHigh PerformanceMetalsMetals
Special Special ForgingsForgingsSpecial Special
ForgingsForgingsWelding Welding
Consumables Consumables Welding Welding
Consumables Consumables PrecisionPrecision StripStripPrecisionPrecision StripStrip
© 2005 BY-PROFIL
Böhler-Ybbstal Böhler-Ybbstal Profil GmbH.Profil GmbH.
Böhler-Ybbstal Böhler-Ybbstal Profil GmbH.Profil GmbH.
BUSMI USABUSMI USA
Villares Metals S.A.
Villares Metals S.A.
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
BöhlerwerkLinz
Wien
Waidhofena. d. Ybbs
Amstetten
turnover 2004: $16.74 Mil.$16.74 Mil.
export share: 82 %82 %
annual output 2004: 2,635 tons2,635 tons
employees: 120120
© 2005 BY-PROFIL
BÖHLER-YBBSTAL PROFILBÖHLER-YBBSTAL PROFIL
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
© 2005 BY-PROFIL
35%$5.87 Mil
34%$5.68 Mil
18%$3.05 Mil13%
$2.14 Mil
Austria USA Germany Other
33%$5.50 Mil
53%$8.96 Mil
4%$0.65 Mil
10%$1.63 Mil
Aviation Energy W ood Other
20042004 $16.74 Mil $16.74 Mil
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
© 2005 BY-PROFIL
1-6 2005 $10.01 Mil1-6 2005 $10.01 Mil
27%$2.66 Mil
18%$1.71 Mil
15%$1.42 Mil
40%$3.98 Mil
Austria Germany USA Other
2%$0.23 Mil
4%$0.39 Mil
49%$4.77 Mil
45%$4.38 Mil
Aviation Energy Wood Other
ProfilesProfilesBU GroupBU GroupProfiles
vsBars
Profilesvs
Bars
Special SectionsAnd
Shaped Bars
Special SectionsAnd
Shaped Bars
Conti - Rolling Line
Conti - Rolling LineBYPBYP ApplicationsApplications BYP
StrategyBYP
StrategyFAB
AnalysisFAB
Analysis
The End