Presentation on Sintech make pumps for Sugar Industry

Pumps for Sugar Industry

ADVANTAGE SINTECH

• Experience with more than 450 Sugar Factories worldwide• Presence in 28 Countries• 58 complete Sugar Plant installations executed since 2006• Experience of plants as small as 500 TCD and as big as 24000 TCD• Tailor Made pumps for Every application in Sugar Factory• Best sales and service commitment. Problems solved within 24 Hrs in Domestic market and 72 Hrs worldwide.• Free consultancy and training to the End User regarding Selection, Installation and preventive maintenance .

ENERGY EFFICIENT FLUID TRANSFER TECHNOLOGY © Copyright 2013 Sintech Precision Products Limited. All Rights Reserved

TAILOR MADE PUMPS

• SPECIALLY DESIGNED PUMPS FOR FFE AND JUICE RE-CIRCULATION• SPECIALLY DESIGNED PUMPS FOR SYRUP / MELT• SPECIAL PUMPS FOR MILL HOUSE / DIFFUSER• SPECIALLY DESIGNED PUMPS FOR MILK OF LIME APPLICATION• BACK PULL OUT TYPE PROCESS PUMPS FOR SCREENED JUICE, IMBIBITION WATER, SULPHITED JUICE AND RAW JUICE.• VERTICAL MIXED FLOW PUMPS FOR SPRAY AND INJECTION SYSTEMS, COOLING TOWER CIRCULATION .• ROTA PUMPS FOR MAGMA AND MASSECUITE.•HIGH CHROME STEEL PUMPS FOR BOILER ASH SLURRY.• HIGH PRESSURE PUMPS FOR BOILER FEED APPLICATION.

© Copyright 2013 Sintech Precision Products Limited. All Rights Reserved

GLOBAL INSTALLTIONS

PROJECT : WHITE NILE SUGAR SUDANCOUNTRY : SUDANPLANT SIZE: 25000 TCD

PROJECT : KPP ProjectCOUNTRY : ThailandPLANT SIZE: 23000 TCD

PROJECT : Tendaho SugarCOUNTRY : EthiopiaPLANT SIZE: 25000 TCD

PROJECT : Kinyara Sugar COUNTRY : UgandaPLANT SIZE: 4000 TCD


GLOBAL INSTALLTIONS

PROJECT : NAT & L Sugar Co. Ltd. COUNTRY : VietnamPLANT SIZE: 8000 TCD

PROJECT : Pelwatte SugarCOUNTRY : Sri LankaPLANT SIZE: 3000 TCD

PROJECT : PT. DUS COUNTRY : IndonesiaPLANT SIZE: 6000 TCD

PROJECT : Kwale Sugar COUNTRY : KenyaPLANT SIZE: 4000 TCD


GLOBAL INSTALLTIONS

PROJECT : PT. Gunung MaduCOUNTRY : IndonesiaPLANT SIZE: 4000 TCD

COPYRIGHT @ SINTECH

PROJECT FivesCail KCP COUNTRY : VietnamPLANT SIZE: 2500 TCD

PROJECT :Kakira SugarCOUNTRY : UgandaPLANT SIZE: 6000 TCD

PROJECT :COUNTRY : KenyaPLANT SIZE: 4000 TCD

ENERGY EFFICIENT FLUID TRANSFER TECHNOLOGY

GLOBAL INSTALLTIONS

PROJECT : Galoya Plantation COUNTRY : IndonesiaPLANT SIZE: 4000 TCD

PROJECT : Finchha SugarCOUNTRY : EthiopiaPLANT SIZE: 12500 TCD

PROJECT : KibosCOUNTRY : KenyaPLANT SIZE: 6000 TCD

PROJECT : Madina Sugar COUNTRY : PakistanPLANT SIZE: 4000 TCD


GLOBAL INSTALLTIONS

PROJECT : Petro Green Co. Limited COUNTRY : ThailandPLANT SIZE: 4000 TCD

PROJECT : Alam SugarCOUNTRY : UgandaPLANT SIZE:

PROJECT : TPC LimitedCOUNTRY : TanzaniaPLANT SIZE: 3000

PROJECT : SCOULCOUNTRY : UgandaPLANT SIZE: 3500 TCD


Other Prestigious USERS


All above Logos are Trademarks of their respective owners


Products

Pumps for Falling Film Evaporator and Juice Recirculation with Dynamic Sealing

• Back Pull out type bearing frame assembly for easy maintenance

• One repeller to reduce the pressure from stuffing box . No External Mechanical Seal required.

•Hydraulically Balanced closed Impeller for Longer Life and Efficiency

•Heavy Sections to withstand high pressure and temperature.

•Bearings are chosen for minimum average life of 20000 Hrs.

UMOR TYPE

RANGECapacity (Maximum) : 1000 m3/hrHead (maximum) : 140 mTemperature : 160º CWorking Pressure : 14 kg/cm2


Products

Specially designed Choke less Pumps for Mill House / Diffuser

• Un-obstructed passage to the discharge size of the pump.

• Handles large solids and long fibers.

• Gentle pumping action, Zero crystal damage.

• Low Maintenance , No sealing ring required and no small clearances to be maintained.

• Vibration free running due to hydraulically balanced construction.

STF TYPE

RANGECapacity (Maximum) : 1500 m3/hrHead (maximum) : 100 mSolids Handled : upto 250 mmDischarge sizes : N.D. 25-500 mm


Products

COPYRIGHT @ SINTECH

Non Clog Pumps for Syrup / Melt with Dynamic Sealing Arrangement

• Back Pull out type bearing frame assembly for easy maintenance

• One repeller to reduce the pressure from stuffing box . No External Mechanical Seal required.

•Hydraulically Balanced closed Impeller for Longer Life and Efficiency

•Heavy Sections to withstand high pressure and temperature.

•Bearings are chosen for minimum average life of 20000 Hrs.

UMHQ TYPE



Products

Specially Designed Pumps for Milk of Lime Application.

• A Totally Non-Clog concept

• High Chrome Steel construction ensures resistance against abrasive Milk of Lime.

• Hardness uptp 600 BHN

• Warrantee for 5 Years against abrasion from Milk of Lime.

• Negligible maintenance required.

STF (Hi Chrome) TYPE



Products

Vertical Mixed Flow / Axial Flow / Vertical Turbine Pumps

• High Overall Efficiency compared to Horizontal Pumps

• No Priming is required as the Impeller is Submerged.

• No Cavitations and Pitting in Impellers and Diffusers

• Heavy Sections to withstand high pressure and temperature.

• Varied Material of Construction offered for Virtually and application.

SVAF/ SVT/ SVMF TYPE

RANGECapacity (Maximum) : 35000 m3/hrHead (maximum) : 300 mTemperature : 95º C


Products

Multistage High Pressure Pumps

• Integrally cast Centerline support.

• Dynamically balanced and independently positioned Impellers.

• Multi-Vane Diffusers maintain radial balance at all flows.

• Separate extra deep stuffing boxes.

• Inter stage Bushing for trouble free operations.

SMS-L & H TYPE



Products

Vertical Sump Pumps

• Compact design, easy to install.

• Always ready for use. No priming required.

• Extra Heavy Shaft.

• Positive conditions prevents cavitations and pitting in Impeller .

• Various Material of Construction available.

STFV, CPSV TYPE



Products

Single and Double Suction Horizontal Split Casing Pumps

• Compact design, easy to install.

• Both side bearing support.


• Stable and robust design.

• Various Material of Construction available.

SCS & SCSD TYPE



Products

COPYRIGHT @ SINTECH

Specially Designed Pumps for Magma / Massecuite

• Negligible leakage.

• Improved suction branch preventing starvation and allowing easy flow.


• Available in External bearing mounting arrangement .

• Zero maintenance required .

SRP TYPE



Products

COPYRIGHT @ SINTECH

Specially Designed Pumps for Molasses

• Can handle Viscous liquids upto 10000 SSU.

• Modified profile for higher tooth life and lower moment of inertia.

• Equal rating flanges allow pumping in either direction.

• Power saving combination of antifriction bearings .

• Replaceable wear plates ensure lasting performance.

SGP TYPE



Products

Sintech Progressive Cavity Pumps

• Pulsation free discharge.

• Simple Construction, easy to dismantle and assemble without any special tools

• Valves not essential.

• High resistance to wear.

• Reversible direction of rotation.

SPC TYPE



PERFORMANCE GUARANTEED

• A well equipped test field exists for the performance tests at our works.

• Modern Test Bed ensures 100% testing of Pumps with human error totally excluded.

• VFD used to cover all the design range at different frequencies.

• Strip test done to check wear and tear between parts in close contact.

• Castings sourced from reliable vendors together with relevant test Certificate.

• Shot Blasted castings are visually inspected

• Physical testing of all relevant raw material including , shafts, all casted parts, fittings, Nuts and Bolts , Couplings etc.



Documents

Presentation on Sintech make pumps for Sugar Industry